diff options
Diffstat (limited to 'kernel/power/swap.c')
| -rw-r--r-- | kernel/power/swap.c | 544 |
1 files changed, 544 insertions, 0 deletions
diff --git a/kernel/power/swap.c b/kernel/power/swap.c new file mode 100644 index 000000000000..9177f3f73a6c --- /dev/null +++ b/kernel/power/swap.c @@ -0,0 +1,544 @@ +/* + * linux/kernel/power/swap.c + * + * This file provides functions for reading the suspend image from + * and writing it to a swap partition. + * + * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> + * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> + * + * This file is released under the GPLv2. + * + */ + +#include <linux/module.h> +#include <linux/smp_lock.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/version.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/genhd.h> +#include <linux/device.h> +#include <linux/buffer_head.h> +#include <linux/bio.h> +#include <linux/swap.h> +#include <linux/swapops.h> +#include <linux/pm.h> + +#include "power.h" + +extern char resume_file[]; + +#define SWSUSP_SIG "S1SUSPEND" + +static struct swsusp_header { + char reserved[PAGE_SIZE - 20 - sizeof(swp_entry_t)]; + swp_entry_t image; + char orig_sig[10]; + char sig[10]; +} __attribute__((packed, aligned(PAGE_SIZE))) swsusp_header; + +/* + * Saving part... + */ + +static unsigned short root_swap = 0xffff; + +static int mark_swapfiles(swp_entry_t start) +{ + int error; + + rw_swap_page_sync(READ, + swp_entry(root_swap, 0), + virt_to_page((unsigned long)&swsusp_header)); + if (!memcmp("SWAP-SPACE",swsusp_header.sig, 10) || + !memcmp("SWAPSPACE2",swsusp_header.sig, 10)) { + memcpy(swsusp_header.orig_sig,swsusp_header.sig, 10); + memcpy(swsusp_header.sig,SWSUSP_SIG, 10); + swsusp_header.image = start; + error = rw_swap_page_sync(WRITE, + swp_entry(root_swap, 0), + virt_to_page((unsigned long) + &swsusp_header)); + } else { + pr_debug("swsusp: Partition is not swap space.\n"); + error = -ENODEV; + } + return error; +} + +/** + * swsusp_swap_check - check if the resume device is a swap device + * and get its index (if so) + */ + +static int swsusp_swap_check(void) /* This is called before saving image */ +{ + int res = swap_type_of(swsusp_resume_device); + + if (res >= 0) { + root_swap = res; + return 0; + } + return res; +} + +/** + * write_page - Write one page to given swap location. + * @buf: Address we're writing. + * @offset: Offset of the swap page we're writing to. + */ + +static int write_page(void *buf, unsigned long offset) +{ + swp_entry_t entry; + int error = -ENOSPC; + + if (offset) { + entry = swp_entry(root_swap, offset); + error = rw_swap_page_sync(WRITE, entry, virt_to_page(buf)); + } + return error; +} + +/* + * The swap map is a data structure used for keeping track of each page + * written to a swap partition. It consists of many swap_map_page + * structures that contain each an array of MAP_PAGE_SIZE swap entries. + * These structures are stored on the swap and linked together with the + * help of the .next_swap member. + * + * The swap map is created during suspend. The swap map pages are + * allocated and populated one at a time, so we only need one memory + * page to set up the entire structure. + * + * During resume we also only need to use one swap_map_page structure + * at a time. + */ + +#define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(long) - 1) + +struct swap_map_page { + unsigned long entries[MAP_PAGE_ENTRIES]; + unsigned long next_swap; +}; + +/** + * The swap_map_handle structure is used for handling swap in + * a file-alike way + */ + +struct swap_map_handle { + struct swap_map_page *cur; + unsigned long cur_swap; + struct bitmap_page *bitmap; + unsigned int k; +}; + +static void release_swap_writer(struct swap_map_handle *handle) +{ + if (handle->cur) + free_page((unsigned long)handle->cur); + handle->cur = NULL; + if (handle->bitmap) + free_bitmap(handle->bitmap); + handle->bitmap = NULL; +} + +static int get_swap_writer(struct swap_map_handle *handle) +{ + handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL); + if (!handle->cur) + return -ENOMEM; + handle->bitmap = alloc_bitmap(count_swap_pages(root_swap, 0)); + if (!handle->bitmap) { + release_swap_writer(handle); + return -ENOMEM; + } + handle->cur_swap = alloc_swap_page(root_swap, handle->bitmap); + if (!handle->cur_swap) { + release_swap_writer(handle); + return -ENOSPC; + } + handle->k = 0; + return 0; +} + +static int swap_write_page(struct swap_map_handle *handle, void *buf) +{ + int error; + unsigned long offset; + + if (!handle->cur) + return -EINVAL; + offset = alloc_swap_page(root_swap, handle->bitmap); + error = write_page(buf, offset); + if (error) + return error; + handle->cur->entries[handle->k++] = offset; + if (handle->k >= MAP_PAGE_ENTRIES) { + offset = alloc_swap_page(root_swap, handle->bitmap); + if (!offset) + return -ENOSPC; + handle->cur->next_swap = offset; + error = write_page(handle->cur, handle->cur_swap); + if (error) + return error; + memset(handle->cur, 0, PAGE_SIZE); + handle->cur_swap = offset; + handle->k = 0; + } + return 0; +} + +static int flush_swap_writer(struct swap_map_handle *handle) +{ + if (handle->cur && handle->cur_swap) + return write_page(handle->cur, handle->cur_swap); + else + return -EINVAL; +} + +/** + * save_image - save the suspend image data + */ + +static int save_image(struct swap_map_handle *handle, + struct snapshot_handle *snapshot, + unsigned int nr_pages) +{ + unsigned int m; + int ret; + int error = 0; + + printk("Saving image data pages (%u pages) ... ", nr_pages); + m = nr_pages / 100; + if (!m) + m = 1; + nr_pages = 0; + do { + ret = snapshot_read_next(snapshot, PAGE_SIZE); + if (ret > 0) { + error = swap_write_page(handle, data_of(*snapshot)); + if (error) + break; + if (!(nr_pages % m)) + printk("\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + } + } while (ret > 0); + if (!error) + printk("\b\b\b\bdone\n"); + return error; +} + +/** + * enough_swap - Make sure we have enough swap to save the image. + * + * Returns TRUE or FALSE after checking the total amount of swap + * space avaiable from the resume partition. + */ + +static int enough_swap(unsigned int nr_pages) +{ + unsigned int free_swap = count_swap_pages(root_swap, 1); + + pr_debug("swsusp: free swap pages: %u\n", free_swap); + return free_swap > (nr_pages + PAGES_FOR_IO + + (nr_pages + PBES_PER_PAGE - 1) / PBES_PER_PAGE); +} + +/** + * swsusp_write - Write entire image and metadata. + * + * It is important _NOT_ to umount filesystems at this point. We want + * them synced (in case something goes wrong) but we DO not want to mark + * filesystem clean: it is not. (And it does not matter, if we resume + * correctly, we'll mark system clean, anyway.) + */ + +int swsusp_write(void) +{ + struct swap_map_handle handle; + struct snapshot_handle snapshot; + struct swsusp_info *header; + unsigned long start; + int error; + + if ((error = swsusp_swap_check())) { + printk(KERN_ERR "swsusp: Cannot find swap device, try swapon -a.\n"); + return error; + } + memset(&snapshot, 0, sizeof(struct snapshot_handle)); + error = snapshot_read_next(&snapshot, PAGE_SIZE); + if (error < PAGE_SIZE) + return error < 0 ? error : -EFAULT; + header = (struct swsusp_info *)data_of(snapshot); + if (!enough_swap(header->pages)) { + printk(KERN_ERR "swsusp: Not enough free swap\n"); + return -ENOSPC; + } + error = get_swap_writer(&handle); + if (!error) { + start = handle.cur_swap; + error = swap_write_page(&handle, header); + } + if (!error) + error = save_image(&handle, &snapshot, header->pages - 1); + if (!error) { + flush_swap_writer(&handle); + printk("S"); + error = mark_swapfiles(swp_entry(root_swap, start)); + printk("|\n"); + } + if (error) + free_all_swap_pages(root_swap, handle.bitmap); + release_swap_writer(&handle); + return error; +} + +/* + * Using bio to read from swap. + * This code requires a bit more work than just using buffer heads + * but, it is the recommended way for 2.5/2.6. + * The following are to signal the beginning and end of I/O. Bios + * finish asynchronously, while we want them to happen synchronously. + * A simple atomic_t, and a wait loop take care of this problem. + */ + +static atomic_t io_done = ATOMIC_INIT(0); + +static int end_io(struct bio *bio, unsigned int num, int err) +{ + if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + panic("I/O error reading memory image"); + atomic_set(&io_done, 0); + return 0; +} + +static struct block_device *resume_bdev; + +/** + * submit - submit BIO request. + * @rw: READ or WRITE. + * @off physical offset of page. + * @page: page we're reading or writing. + * + * Straight from the textbook - allocate and initialize the bio. + * If we're writing, make sure the page is marked as dirty. + * Then submit it and wait. + */ + +static int submit(int rw, pgoff_t page_off, void *page) +{ + int error = 0; + struct bio *bio; + + bio = bio_alloc(GFP_ATOMIC, 1); + if (!bio) + return -ENOMEM; + bio->bi_sector = page_off * (PAGE_SIZE >> 9); + bio->bi_bdev = resume_bdev; + bio->bi_end_io = end_io; + + if (bio_add_page(bio, virt_to_page(page), PAGE_SIZE, 0) < PAGE_SIZE) { + printk("swsusp: ERROR: adding page to bio at %ld\n",page_off); + error = -EFAULT; + goto Done; + } + + atomic_set(&io_done, 1); + submit_bio(rw | (1 << BIO_RW_SYNC), bio); + while (atomic_read(&io_done)) + yield(); + if (rw == READ) + bio_set_pages_dirty(bio); + Done: + bio_put(bio); + return error; +} + +static int bio_read_page(pgoff_t page_off, void *page) +{ + return submit(READ, page_off, page); +} + +static int bio_write_page(pgoff_t page_off, void *page) +{ + return submit(WRITE, page_off, page); +} + +/** + * The following functions allow us to read data using a swap map + * in a file-alike way + */ + +static void release_swap_reader(struct swap_map_handle *handle) +{ + if (handle->cur) + free_page((unsigned long)handle->cur); + handle->cur = NULL; +} + +static int get_swap_reader(struct swap_map_handle *handle, + swp_entry_t start) +{ + int error; + + if (!swp_offset(start)) + return -EINVAL; + handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_ATOMIC); + if (!handle->cur) + return -ENOMEM; + error = bio_read_page(swp_offset(start), handle->cur); + if (error) { + release_swap_reader(handle); + return error; + } + handle->k = 0; + return 0; +} + +static int swap_read_page(struct swap_map_handle *handle, void *buf) +{ + unsigned long offset; + int error; + + if (!handle->cur) + return -EINVAL; + offset = handle->cur->entries[handle->k]; + if (!offset) + return -EFAULT; + error = bio_read_page(offset, buf); + if (error) + return error; + if (++handle->k >= MAP_PAGE_ENTRIES) { + handle->k = 0; + offset = handle->cur->next_swap; + if (!offset) + release_swap_reader(handle); + else + error = bio_read_page(offset, handle->cur); + } + return error; +} + +/** + * load_image - load the image using the swap map handle + * @handle and the snapshot handle @snapshot + * (assume there are @nr_pages pages to load) + */ + +static int load_image(struct swap_map_handle *handle, + struct snapshot_handle *snapshot, + unsigned int nr_pages) +{ + unsigned int m; + int ret; + int error = 0; + + printk("Loading image data pages (%u pages) ... ", nr_pages); + m = nr_pages / 100; + if (!m) + m = 1; + nr_pages = 0; + do { + ret = snapshot_write_next(snapshot, PAGE_SIZE); + if (ret > 0) { + error = swap_read_page(handle, data_of(*snapshot)); + if (error) + break; + if (!(nr_pages % m)) + printk("\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + } + } while (ret > 0); + if (!error) + printk("\b\b\b\bdone\n"); + if (!snapshot_image_loaded(snapshot)) + error = -ENODATA; + return error; +} + +int swsusp_read(void) +{ + int error; + struct swap_map_handle handle; + struct snapshot_handle snapshot; + struct swsusp_info *header; + + if (IS_ERR(resume_bdev)) { + pr_debug("swsusp: block device not initialised\n"); + return PTR_ERR(resume_bdev); + } + + memset(&snapshot, 0, sizeof(struct snapshot_handle)); + error = snapshot_write_next(&snapshot, PAGE_SIZE); + if (error < PAGE_SIZE) + return error < 0 ? error : -EFAULT; + header = (struct swsusp_info *)data_of(snapshot); + error = get_swap_reader(&handle, swsusp_header.image); + if (!error) + error = swap_read_page(&handle, header); + if (!error) + error = load_image(&handle, &snapshot, header->pages - 1); + release_swap_reader(&handle); + + blkdev_put(resume_bdev); + + if (!error) + pr_debug("swsusp: Reading resume file was successful\n"); + else + pr_debug("swsusp: Error %d resuming\n", error); + return error; +} + +/** + * swsusp_check - Check for swsusp signature in the resume device + */ + +int swsusp_check(void) +{ + int error; + + resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); + if (!IS_ERR(resume_bdev)) { + set_blocksize(resume_bdev, PAGE_SIZE); + memset(&swsusp_header, 0, sizeof(swsusp_header)); + if ((error = bio_read_page(0, &swsusp_header))) + return error; + if (!memcmp(SWSUSP_SIG, swsusp_header.sig, 10)) { + memcpy(swsusp_header.sig, swsusp_header.orig_sig, 10); + /* Reset swap signature now */ + error = bio_write_page(0, &swsusp_header); + } else { + return -EINVAL; + } + if (error) + blkdev_put(resume_bdev); + else + pr_debug("swsusp: Signature found, resuming\n"); + } else { + error = PTR_ERR(resume_bdev); + } + + if (error) + pr_debug("swsusp: Error %d check for resume file\n", error); + + return error; +} + +/** + * swsusp_close - close swap device. + */ + +void swsusp_close(void) +{ + if (IS_ERR(resume_bdev)) { + pr_debug("swsusp: block device not initialised\n"); + return; + } + + blkdev_put(resume_bdev); +} |
