diff options
Diffstat (limited to 'include')
101 files changed, 3741 insertions, 1305 deletions
diff --git a/include/asm-generic/errno.h b/include/asm-generic/errno.h index e8852c092fea..28cc03bf19e6 100644 --- a/include/asm-generic/errno.h +++ b/include/asm-generic/errno.h @@ -106,4 +106,6 @@ #define EOWNERDEAD 130 /* Owner died */ #define ENOTRECOVERABLE 131 /* State not recoverable */ +#define ERFKILL 132 /* Operation not possible due to RF-kill */ + #endif diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b3afd2219ad2..a2df7030d49d 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -311,6 +311,7 @@ unifdef-y += ppp-comp.h unifdef-y += ptrace.h unifdef-y += quota.h unifdef-y += random.h +unifdef-y += rfkill.h unifdef-y += irqnr.h unifdef-y += reboot.h unifdef-y += reiserfs_fs.h diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild index eff898aac02b..8cb05aae661c 100644 --- a/include/linux/can/Kbuild +++ b/include/linux/can/Kbuild @@ -1,3 +1,4 @@ header-y += raw.h header-y += bcm.h header-y += error.h +header-y += netlink.h diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h new file mode 100644 index 000000000000..4a37a56f6cdd --- /dev/null +++ b/include/linux/can/dev.h @@ -0,0 +1,70 @@ +/* + * linux/can/dev.h + * + * Definitions for the CAN network device driver interface + * + * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com> + * Varma Electronics Oy + * + * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com> + * + * Send feedback to <socketcan-users@lists.berlios.de> + */ + +#ifndef CAN_DEV_H +#define CAN_DEV_H + +#include <linux/can/netlink.h> +#include <linux/can/error.h> + +/* + * CAN mode + */ +enum can_mode { + CAN_MODE_STOP = 0, + CAN_MODE_START, + CAN_MODE_SLEEP +}; + +/* + * CAN common private data + */ +#define CAN_ECHO_SKB_MAX 4 + +struct can_priv { + struct can_device_stats can_stats; + + struct can_bittiming bittiming; + struct can_bittiming_const *bittiming_const; + struct can_clock clock; + + enum can_state state; + u32 ctrlmode; + + int restart_ms; + struct timer_list restart_timer; + + struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX]; + + int (*do_set_bittiming)(struct net_device *dev); + int (*do_set_mode)(struct net_device *dev, enum can_mode mode); + int (*do_get_state)(const struct net_device *dev, + enum can_state *state); +}; + +struct net_device *alloc_candev(int sizeof_priv); +void free_candev(struct net_device *dev); + +int open_candev(struct net_device *dev); +void close_candev(struct net_device *dev); + +int register_candev(struct net_device *dev); +void unregister_candev(struct net_device *dev); + +int can_restart_now(struct net_device *dev); +void can_bus_off(struct net_device *dev); + +void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx); +void can_get_echo_skb(struct net_device *dev, int idx); + +#endif /* CAN_DEV_H */ diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h new file mode 100644 index 000000000000..9ecbb7871c0e --- /dev/null +++ b/include/linux/can/netlink.h @@ -0,0 +1,113 @@ +/* + * linux/can/netlink.h + * + * Definitions for the CAN netlink interface + * + * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> + * + * Send feedback to <socketcan-users@lists.berlios.de> + * + */ + +#ifndef CAN_NETLINK_H +#define CAN_NETLINK_H + +#include <linux/types.h> + +/* + * CAN bit-timing parameters + * + * For futher information, please read chapter "8 BIT TIMING + * REQUIREMENTS" of the "Bosch CAN Specification version 2.0" + * at http://www.semiconductors.bosch.de/pdf/can2spec.pdf. + */ +struct can_bittiming { + __u32 bitrate; /* Bit-rate in bits/second */ + __u32 sample_point; /* Sample point in one-tenth of a percent */ + __u32 tq; /* Time quanta (TQ) in nanoseconds */ + __u32 prop_seg; /* Propagation segment in TQs */ + __u32 phase_seg1; /* Phase buffer segment 1 in TQs */ + __u32 phase_seg2; /* Phase buffer segment 2 in TQs */ + __u32 sjw; /* Synchronisation jump width in TQs */ + __u32 brp; /* Bit-rate prescaler */ +}; + +/* + * CAN harware-dependent bit-timing constant + * + * Used for calculating and checking bit-timing parameters + */ +struct can_bittiming_const { + char name[16]; /* Name of the CAN controller hardware */ + __u32 tseg1_min; /* Time segement 1 = prop_seg + phase_seg1 */ + __u32 tseg1_max; + __u32 tseg2_min; /* Time segement 2 = phase_seg2 */ + __u32 tseg2_max; + __u32 sjw_max; /* Synchronisation jump width */ + __u32 brp_min; /* Bit-rate prescaler */ + __u32 brp_max; + __u32 brp_inc; +}; + +/* + * CAN clock parameters + */ +struct can_clock { + __u32 freq; /* CAN system clock frequency in Hz */ +}; + +/* + * CAN operational and error states + */ +enum can_state { + CAN_STATE_ERROR_ACTIVE = 0, /* RX/TX error count < 96 */ + CAN_STATE_ERROR_WARNING, /* RX/TX error count < 128 */ + CAN_STATE_ERROR_PASSIVE, /* RX/TX error count < 256 */ + CAN_STATE_BUS_OFF, /* RX/TX error count >= 256 */ + CAN_STATE_STOPPED, /* Device is stopped */ + CAN_STATE_SLEEPING, /* Device is sleeping */ + CAN_STATE_MAX +}; + +/* + * CAN controller mode + */ +struct can_ctrlmode { + __u32 mask; + __u32 flags; +}; + +#define CAN_CTRLMODE_LOOPBACK 0x1 /* Loopback mode */ +#define CAN_CTRLMODE_LISTENONLY 0x2 /* Listen-only mode */ +#define CAN_CTRLMODE_3_SAMPLES 0x4 /* Triple sampling mode */ + +/* + * CAN device statistics + */ +struct can_device_stats { + __u32 bus_error; /* Bus errors */ + __u32 error_warning; /* Changes to error warning state */ + __u32 error_passive; /* Changes to error passive state */ + __u32 bus_off; /* Changes to bus off state */ + __u32 arbitration_lost; /* Arbitration lost errors */ + __u32 restarts; /* CAN controller re-starts */ +}; + +/* + * CAN netlink interface + */ +enum { + IFLA_CAN_UNSPEC, + IFLA_CAN_BITTIMING, + IFLA_CAN_BITTIMING_CONST, + IFLA_CAN_CLOCK, + IFLA_CAN_STATE, + IFLA_CAN_CTRLMODE, + IFLA_CAN_RESTART_MS, + IFLA_CAN_RESTART, + __IFLA_CAN_MAX +}; + +#define IFLA_CAN_MAX (__IFLA_CAN_MAX - 1) + +#endif /* CAN_NETLINK_H */ diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h new file mode 100644 index 000000000000..01ee2aeb048d --- /dev/null +++ b/include/linux/can/platform/sja1000.h @@ -0,0 +1,35 @@ +#ifndef _CAN_PLATFORM_SJA1000_H_ +#define _CAN_PLATFORM_SJA1000_H_ + +/* clock divider register */ +#define CDR_CLKOUT_MASK 0x07 +#define CDR_CLK_OFF 0x08 /* Clock off (CLKOUT pin) */ +#define CDR_RXINPEN 0x20 /* TX1 output is RX irq output */ +#define CDR_CBP 0x40 /* CAN input comparator bypass */ +#define CDR_PELICAN 0x80 /* PeliCAN mode */ + +/* output control register */ +#define OCR_MODE_BIPHASE 0x00 +#define OCR_MODE_TEST 0x01 +#define OCR_MODE_NORMAL 0x02 +#define OCR_MODE_CLOCK 0x03 +#define OCR_MODE_MASK 0x07 +#define OCR_TX0_INVERT 0x04 +#define OCR_TX0_PULLDOWN 0x08 +#define OCR_TX0_PULLUP 0x10 +#define OCR_TX0_PUSHPULL 0x18 +#define OCR_TX1_INVERT 0x20 +#define OCR_TX1_PULLDOWN 0x40 +#define OCR_TX1_PULLUP 0x80 +#define OCR_TX1_PUSHPULL 0xc0 +#define OCR_TX_MASK 0xfc +#define OCR_TX_SHIFT 2 + +struct sja1000_platform_data { + u32 clock; /* CAN bus oscillator frequency in Hz */ + + u8 ocr; /* output control register */ + u8 cdr; /* clock divider register */ +}; + +#endif /* !_CAN_PLATFORM_SJA1000_H_ */ diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index a1f17abba7dc..3d7a6687d247 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -182,6 +182,33 @@ static inline unsigned compare_ether_addr_64bits(const u8 addr1[6+2], return compare_ether_addr(addr1, addr2); #endif } + +/** + * is_etherdev_addr - Tell if given Ethernet address belongs to the device. + * @dev: Pointer to a device structure + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Compare passed address with all addresses of the device. Return true if the + * address if one of the device addresses. + * + * Note that this function calls compare_ether_addr_64bits() so take care of + * the right padding. + */ +static inline bool is_etherdev_addr(const struct net_device *dev, + const u8 addr[6 + 2]) +{ + struct netdev_hw_addr *ha; + int res = 1; + + rcu_read_lock(); + for_each_dev_addr(dev, ha) { + res = compare_ether_addr_64bits(addr, ha->addr); + if (!res) + break; + } + rcu_read_unlock(); + return !res; +} #endif /* __KERNEL__ */ /** diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 131b127b70f8..9b660bd2e2b3 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -26,11 +26,14 @@ struct ethtool_cmd { __u8 phy_address; __u8 transceiver; /* Which transceiver to use */ __u8 autoneg; /* Enable or disable autonegotiation */ + __u8 mdio_support; __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ __u16 speed_hi; - __u16 reserved2; - __u32 reserved[3]; + __u8 eth_tp_mdix; + __u8 reserved2; + __u32 lp_advertising; /* Features the link partner advertises */ + __u32 reserved[2]; }; static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep, @@ -563,6 +566,11 @@ struct ethtool_ops { #define SUPPORTED_Pause (1 << 13) #define SUPPORTED_Asym_Pause (1 << 14) #define SUPPORTED_2500baseX_Full (1 << 15) +#define SUPPORTED_Backplane (1 << 16) +#define SUPPORTED_1000baseKX_Full (1 << 17) +#define SUPPORTED_10000baseKX4_Full (1 << 18) +#define SUPPORTED_10000baseKR_Full (1 << 19) +#define SUPPORTED_10000baseR_FEC (1 << 20) /* Indicates what features are advertised by the interface. */ #define ADVERTISED_10baseT_Half (1 << 0) @@ -581,6 +589,11 @@ struct ethtool_ops { #define ADVERTISED_Pause (1 << 13) #define ADVERTISED_Asym_Pause (1 << 14) #define ADVERTISED_2500baseX_Full (1 << 15) +#define ADVERTISED_Backplane (1 << 16) +#define ADVERTISED_1000baseKX_Full (1 << 17) +#define ADVERTISED_10000baseKX4_Full (1 << 18) +#define ADVERTISED_10000baseKR_Full (1 << 19) +#define ADVERTISED_10000baseR_FEC (1 << 20) /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the @@ -605,6 +618,7 @@ struct ethtool_ops { #define PORT_MII 0x02 #define PORT_FIBRE 0x03 #define PORT_BNC 0x04 +#define PORT_OTHER 0xff /* Which transceiver to use. */ #define XCVR_INTERNAL 0x00 @@ -619,6 +633,11 @@ struct ethtool_ops { #define AUTONEG_DISABLE 0x00 #define AUTONEG_ENABLE 0x01 +/* Mode MDI or MDI-X */ +#define ETH_TP_MDI_INVALID 0x00 +#define ETH_TP_MDI 0x01 +#define ETH_TP_MDI_X 0x02 + /* Wake-On-Lan options. */ #define WAKE_PHY (1 << 0) #define WAKE_UCAST (1 << 1) diff --git a/include/linux/fs_enet_pd.h b/include/linux/fs_enet_pd.h index 8300cab30f9a..51b793466ff3 100644 --- a/include/linux/fs_enet_pd.h +++ b/include/linux/fs_enet_pd.h @@ -17,6 +17,7 @@ #define FS_ENET_PD_H #include <linux/string.h> +#include <linux/of_mdio.h> #include <asm/types.h> #define FS_ENET_NAME "fs_enet" @@ -130,10 +131,7 @@ struct fs_platform_info { u32 device_flags; - int phy_addr; /* the phy address (-1 no phy) */ - char bus_id[16]; - int phy_irq; /* the phy irq (if it exists) */ - + struct device_node *phy_node; const struct fs_mii_bus_info *bus_info; int rx_ring, tx_ring; /* number of buffers on rx */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 4b501b48ce86..a9173d5434d1 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -493,6 +493,7 @@ struct ieee80211s_hdr { /* Mesh flags */ #define MESH_FLAGS_AE_A4 0x1 #define MESH_FLAGS_AE_A5_A6 0x2 +#define MESH_FLAGS_AE 0x3 #define MESH_FLAGS_PS_DEEP 0x4 /** @@ -540,10 +541,10 @@ struct ieee80211_tim_ie { u8 dtim_period; u8 bitmap_ctrl; /* variable size: 1 - 251 bytes */ - u8 virtual_map[0]; + u8 virtual_map[1]; } __attribute__ ((packed)); -#define WLAN_SA_QUERY_TR_ID_LEN 16 +#define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { __le16 frame_control; @@ -1068,8 +1069,12 @@ enum ieee80211_category { WLAN_CATEGORY_DLS = 2, WLAN_CATEGORY_BACK = 3, WLAN_CATEGORY_PUBLIC = 4, + WLAN_CATEGORY_HT = 7, WLAN_CATEGORY_SA_QUERY = 8, + WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, WLAN_CATEGORY_WMM = 17, + WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, + WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; /* SPECTRUM_MGMT action code */ @@ -1081,6 +1086,15 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; +/* Security key length */ +enum ieee80211_key_len { + WLAN_KEY_LEN_WEP40 = 5, + WLAN_KEY_LEN_WEP104 = 13, + WLAN_KEY_LEN_CCMP = 16, + WLAN_KEY_LEN_TKIP = 32, + WLAN_KEY_LEN_AES_CMAC = 16, +}; + /* * IEEE 802.11-2007 7.3.2.9 Country information element * @@ -1261,7 +1275,9 @@ static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr) if (ieee80211_has_protected(hdr->frame_control)) return true; category = ((u8 *) hdr) + 24; - return *category != WLAN_CATEGORY_PUBLIC; + return *category != WLAN_CATEGORY_PUBLIC && + *category != WLAN_CATEGORY_HT && + *category != WLAN_CATEGORY_VENDOR_SPECIFIC; } return false; @@ -1383,4 +1399,43 @@ static inline int ieee80211_freq_to_ofdm_chan(int s_freq, int freq) return -1; } +/** + * ieee80211_tu_to_usec - convert time units (TU) to microseconds + * @tu: the TUs + */ +static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) +{ + return 1024 * tu; +} + +/** + * ieee80211_check_tim - check if AID bit is set in TIM + * @tim: the TIM IE + * @tim_len: length of the TIM IE + * @aid: the AID to look for + */ +static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, + u8 tim_len, u16 aid) +{ + u8 mask; + u8 index, indexn1, indexn2; + + if (unlikely(!tim || tim_len < sizeof(*tim))) + return false; + + aid &= 0x3fff; + index = aid / 8; + mask = 1 << (aid & 7); + + indexn1 = tim->bitmap_ctrl & 0xfe; + indexn2 = tim_len + indexn1 - 4; + + if (index < indexn1 || index > indexn2) + return false; + + index -= indexn1; + + return !!(tim->virtual_map[index] & mask); +} + #endif /* LINUX_IEEE80211_H */ diff --git a/include/linux/if.h b/include/linux/if.h index 1108f3e099e3..b9a6229f3be7 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -67,6 +67,9 @@ #define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ #define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ #define IFF_WAN_HDLC 0x200 /* WAN HDLC device */ +#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to + * release skb->dst + */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h index 5ff89809a581..b554300ef8bf 100644 --- a/include/linux/if_arp.h +++ b/include/linux/if_arp.h @@ -86,6 +86,8 @@ #define ARPHRD_IEEE80211 801 /* IEEE 802.11 */ #define ARPHRD_IEEE80211_PRISM 802 /* IEEE 802.11 + Prism2 header */ #define ARPHRD_IEEE80211_RADIOTAP 803 /* IEEE 802.11 + radiotap header */ +#define ARPHRD_IEEE802154 804 +#define ARPHRD_IEEE802154_PHY 805 #define ARPHRD_PHONET 820 /* PhoNet media type */ #define ARPHRD_PHONET_PIPE 821 /* PhoNet pipe header */ diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 60e8934d10b5..ae3a1871413d 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -107,6 +107,7 @@ #define ETH_P_DSA 0x001B /* Distributed Switch Arch. */ #define ETH_P_TRAILER 0x001C /* Trailer switch tagging */ #define ETH_P_PHONET 0x00F5 /* Nokia Phonet frames */ +#define ETH_P_IEEE802154 0x00F6 /* IEEE802.15.4 frame */ /* * This is an Ethernet frame header. diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index 18db0668065a..dea7d6b7cf98 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -46,6 +46,8 @@ struct sockaddr_ll #define PACKET_VERSION 10 #define PACKET_HDRLEN 11 #define PACKET_RESERVE 12 +#define PACKET_TX_RING 13 +#define PACKET_LOSS 14 struct tpacket_stats { @@ -63,14 +65,22 @@ struct tpacket_auxdata __u16 tp_vlan_tci; }; +/* Rx ring - header status */ +#define TP_STATUS_KERNEL 0x0 +#define TP_STATUS_USER 0x1 +#define TP_STATUS_COPY 0x2 +#define TP_STATUS_LOSING 0x4 +#define TP_STATUS_CSUMNOTREADY 0x8 + +/* Tx ring - header status */ +#define TP_STATUS_AVAILABLE 0x0 +#define TP_STATUS_SEND_REQUEST 0x1 +#define TP_STATUS_SENDING 0x2 +#define TP_STATUS_WRONG_FORMAT 0x4 + struct tpacket_hdr { unsigned long tp_status; -#define TP_STATUS_KERNEL 0 -#define TP_STATUS_USER 1 -#define TP_STATUS_COPY 2 -#define TP_STATUS_LOSING 4 -#define TP_STATUS_CSUMNOTREADY 8 unsigned int tp_len; unsigned int tp_snaplen; unsigned short tp_mac; @@ -135,5 +145,6 @@ struct packet_mreq #define PACKET_MR_MULTICAST 0 #define PACKET_MR_PROMISC 1 #define PACKET_MR_ALLMULTI 2 +#define PACKET_MR_UNICAST 3 #endif diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h index 049d6c9428db..915ba5789f0e 100644 --- a/include/linux/if_tun.h +++ b/include/linux/if_tun.h @@ -55,6 +55,7 @@ #define IFF_NO_PI 0x1000 #define IFF_ONE_QUEUE 0x2000 #define IFF_VNET_HDR 0x4000 +#define IFF_TUN_EXCL 0x8000 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 5a9aae4adb44..5eb9b0f857e0 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -44,7 +44,7 @@ struct ip_tunnel_prl { __u16 flags; __u16 __reserved; __u32 datalen; - __u32 __reserved2; + __u32 rs_delay; /* data follows */ }; diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index e1ff5b14310e..7ff9af1d0f05 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -118,8 +118,7 @@ extern int vlan_hwaccel_do_receive(struct sk_buff *skb); extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp, unsigned int vlan_tci, struct sk_buff *skb); extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp, - unsigned int vlan_tci, - struct napi_gro_fraginfo *info); + unsigned int vlan_tci); #else static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev) @@ -154,8 +153,7 @@ static inline int vlan_gro_receive(struct napi_struct *napi, } static inline int vlan_gro_frags(struct napi_struct *napi, - struct vlan_group *grp, unsigned int vlan_tci, - struct napi_gro_fraginfo *info) + struct vlan_group *grp, unsigned int vlan_tci) { return NET_RX_DROP; } diff --git a/include/linux/in.h b/include/linux/in.h index d60122a3a088..cf196da04ec9 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -107,6 +107,7 @@ struct in_addr { #define MCAST_JOIN_SOURCE_GROUP 46 #define MCAST_LEAVE_SOURCE_GROUP 47 #define MCAST_MSFILTER 48 +#define IP_MULTICAST_ALL 49 #define MCAST_EXCLUDE 0 #define MCAST_INCLUDE 1 diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 476d9464ac82..c662efa68289 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -169,6 +169,12 @@ struct ipv6_devconf { __s32 accept_dad; void *sysctl; }; + +struct ipv6_params { + __s32 disable_ipv6; + __s32 autoconf; +}; +extern struct ipv6_params ipv6_defaults; #endif /* index values for the variables in ipv6_devconf */ diff --git a/include/linux/isdn/capilli.h b/include/linux/isdn/capilli.h index 35e9b0fd014b..7acb87a44872 100644 --- a/include/linux/isdn/capilli.h +++ b/include/linux/isdn/capilli.h @@ -79,7 +79,7 @@ int attach_capi_ctr(struct capi_ctr *); int detach_capi_ctr(struct capi_ctr *); void capi_ctr_ready(struct capi_ctr * card); -void capi_ctr_reseted(struct capi_ctr * card); +void capi_ctr_down(struct capi_ctr * card); void capi_ctr_suspend_output(struct capi_ctr * card); void capi_ctr_resume_output(struct capi_ctr * card); void capi_ctr_handle_message(struct capi_ctr * card, u16 appl, struct sk_buff *skb); diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h index 93150ecf3ea4..5d10ae364b5e 100644 --- a/include/linux/list_nulls.h +++ b/include/linux/list_nulls.h @@ -56,6 +56,18 @@ static inline int hlist_nulls_empty(const struct hlist_nulls_head *h) return is_a_nulls(h->first); } +static inline void hlist_nulls_add_head(struct hlist_nulls_node *n, + struct hlist_nulls_head *h) +{ + struct hlist_nulls_node *first = h->first; + + n->next = first; + n->pprev = &h->first; + h->first = n; + if (!is_a_nulls(first)) + first->pprev = &n->next; +} + static inline void __hlist_nulls_del(struct hlist_nulls_node *n) { struct hlist_nulls_node *next = n->next; @@ -65,6 +77,12 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n) next->pprev = pprev; } +static inline void hlist_nulls_del(struct hlist_nulls_node *n) +{ + __hlist_nulls_del(n); + n->pprev = LIST_POISON2; +} + /** * hlist_nulls_for_each_entry - iterate over list of given type * @tpos: the type * to use as a loop cursor. diff --git a/include/linux/mISDNdsp.h b/include/linux/mISDNdsp.h index 6b71d2dce508..41d1eeb9b3bd 100644 --- a/include/linux/mISDNdsp.h +++ b/include/linux/mISDNdsp.h @@ -12,7 +12,8 @@ struct mISDN_dsp_element { void *(*new)(const char *arg); void (*free)(void *p); void (*process_tx)(void *p, unsigned char *data, int len); - void (*process_rx)(void *p, unsigned char *data, int len); + void (*process_rx)(void *p, unsigned char *data, int len, + unsigned int txlen); int num_args; struct mISDN_dsp_element_arg *args; @@ -24,6 +25,7 @@ extern void mISDN_dsp_element_unregister(struct mISDN_dsp_element *elem); struct dsp_features { int hfc_id; /* unique id to identify the chip (or -1) */ int hfc_dtmf; /* set if HFCmulti card supports dtmf */ + int hfc_conf; /* set if HFCmulti card supports conferences */ int hfc_loops; /* set if card supports tone loops */ int hfc_echocanhw; /* set if card supports echocancelation*/ int pcm_id; /* unique id to identify the pcm bus (or -1) */ diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index 97ffdc1d3442..7f9831da847f 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -89,11 +89,6 @@ struct dchannel { void (*phfunc) (struct dchannel *); u_int state; void *l1; - /* HW access */ - u_char (*read_reg) (void *, u_char); - void (*write_reg) (void *, u_char, u_char); - void (*read_fifo) (void *, u_char *, int); - void (*write_fifo) (void *, u_char *, int); void *hw; int slot; /* multiport card channel slot */ struct timer_list timer; @@ -151,11 +146,6 @@ struct bchannel { u_long Flags; struct work_struct workq; u_int state; - /* HW access */ - u_char (*read_reg) (void *, u_char); - void (*write_reg) (void *, u_char, u_char); - void (*read_fifo) (void *, u_char *, int); - void (*write_fifo) (void *, u_char *, int); void *hw; int slot; /* multiport card channel slot */ struct timer_list timer; @@ -185,7 +175,7 @@ extern int dchannel_senddata(struct dchannel *, struct sk_buff *); extern int bchannel_senddata(struct bchannel *, struct sk_buff *); extern void recv_Dchannel(struct dchannel *); extern void recv_Echannel(struct dchannel *, struct dchannel *); -extern void recv_Bchannel(struct bchannel *); +extern void recv_Bchannel(struct bchannel *, unsigned int id); extern void recv_Dchannel_skb(struct dchannel *, struct sk_buff *); extern void recv_Bchannel_skb(struct bchannel *, struct sk_buff *); extern void confirm_Bsend(struct bchannel *bch); diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h index 5da3d95b27f1..45100b39a7cf 100644 --- a/include/linux/mISDNif.h +++ b/include/linux/mISDNif.h @@ -229,6 +229,7 @@ #define OPTION_L2_PTP 2 #define OPTION_L2_FIXEDTEI 3 #define OPTION_L2_CLEANUP 4 +#define OPTION_L1_HOLD 5 /* should be in sync with linux/kobject.h:KOBJ_NAME_LEN */ #define MISDN_MAX_IDLEN 20 @@ -291,19 +292,19 @@ struct mISDN_devrename { /* MPH_INFORMATION_REQ payload */ struct ph_info_ch { - __u32 protocol; - __u64 Flags; + __u32 protocol; + __u64 Flags; }; struct ph_info_dch { - struct ph_info_ch ch; - __u16 state; - __u16 num_bch; + struct ph_info_ch ch; + __u16 state; + __u16 num_bch; }; struct ph_info { - struct ph_info_dch dch; - struct ph_info_ch bch[]; + struct ph_info_dch dch; + struct ph_info_ch bch[]; }; /* timer device ioctl */ @@ -317,6 +318,7 @@ struct ph_info { #define IMCTRLREQ _IOR('I', 69, int) #define IMCLEAR_L2 _IOR('I', 70, int) #define IMSETDEVNAME _IOR('I', 71, struct mISDN_devrename) +#define IMHOLD_L1 _IOR('I', 72, int) static inline int test_channelmap(u_int nr, u_char *map) @@ -362,7 +364,8 @@ clear_channelmap(u_int nr, u_char *map) #define MISDN_CTRL_HFC_RECEIVE_ON 0x4006 #define MISDN_CTRL_HFC_ECHOCAN_ON 0x4007 #define MISDN_CTRL_HFC_ECHOCAN_OFF 0x4008 - +#define MISDN_CTRL_HFC_WD_INIT 0x4009 +#define MISDN_CTRL_HFC_WD_RESET 0x400A /* socket options */ #define MISDN_TIME_STAMP 0x0001 diff --git a/include/linux/mdio.h b/include/linux/mdio.h new file mode 100644 index 000000000000..cfdf1df2875e --- /dev/null +++ b/include/linux/mdio.h @@ -0,0 +1,356 @@ +/* + * linux/mdio.h: definitions for MDIO (clause 45) transceivers + * Copyright 2006-2009 Solarflare Communications Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation, incorporated herein by reference. + */ + +#ifndef __LINUX_MDIO_H__ +#define __LINUX_MDIO_H__ + +#include <linux/mii.h> + +/* MDIO Manageable Devices (MMDs). */ +#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/ + * Physical Medium Dependent */ +#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */ +#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */ +#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */ +#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */ +#define MDIO_MMD_TC 6 /* Transmission Convergence */ +#define MDIO_MMD_AN 7 /* Auto-Negotiation */ +#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */ +#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */ +#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */ + +/* Generic MDIO registers. */ +#define MDIO_CTRL1 MII_BMCR +#define MDIO_STAT1 MII_BMSR +#define MDIO_DEVID1 MII_PHYSID1 +#define MDIO_DEVID2 MII_PHYSID2 +#define MDIO_SPEED 4 /* Speed ability */ +#define MDIO_DEVS1 5 /* Devices in package */ +#define MDIO_DEVS2 6 +#define MDIO_CTRL2 7 /* 10G control 2 */ +#define MDIO_STAT2 8 /* 10G status 2 */ +#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */ +#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */ +#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */ +#define MDIO_PKGID1 14 /* Package identifier */ +#define MDIO_PKGID2 15 +#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */ +#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */ +#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */ + +/* Media-dependent registers. */ +#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */ +#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A. + * Lanes B-D are numbered 134-136. */ +#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */ +#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */ +#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */ +#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */ +#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */ + +/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */ +#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */ +#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */ +#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */ +#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */ +#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */ +#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */ + +/* Control register 1. */ +/* Enable extended speed selection */ +#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100) +/* All speed selection bits */ +#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c) +#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX +#define MDIO_CTRL1_LPOWER BMCR_PDOWN +#define MDIO_CTRL1_RESET BMCR_RESET +#define MDIO_PMA_CTRL1_LOOPBACK 0x0001 +#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000 +#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100 +#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK +#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART +#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE +#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */ + +/* 10 Gb/s */ +#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00) +/* 10PASS-TS/2BASE-TL */ +#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04) + +/* Status register 1. */ +#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */ +#define MDIO_STAT1_LSTATUS BMSR_LSTATUS +#define MDIO_STAT1_FAULT 0x0080 /* Fault */ +#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */ +#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE +#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT +#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE +#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */ +#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */ + +/* Speed register. */ +#define MDIO_SPEED_10G 0x0001 /* 10G capable */ +#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */ +#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */ +#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */ +#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */ +#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */ +#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */ + +/* Device present registers. */ +#define MDIO_DEVS_PRESENT(devad) (1 << (devad)) +#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD) +#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS) +#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS) +#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS) +#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS) +#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC) +#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN) +#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT) + +/* Control register 2. */ +#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */ +#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */ +#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */ +#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */ +#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */ +#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */ +#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */ +#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */ +#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */ +#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */ +#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */ +#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */ +#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */ +#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */ +#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */ +#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */ +#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */ +#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */ +#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */ +#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */ +#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */ +#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */ + +/* Status register 2. */ +#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */ +#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */ +#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */ +#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */ +#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */ +#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */ +#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */ +#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */ +#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */ +#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */ +#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */ +#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */ +#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */ +#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */ +#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ +#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */ +#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */ +#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */ +#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */ +#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */ + +/* Transmit disable register. */ +#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */ +#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */ +#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */ +#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */ +#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */ + +/* Receive signal detect register. */ +#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */ +#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */ +#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */ +#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */ +#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */ + +/* Extended abilities register. */ +#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */ +#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */ +#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */ +#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */ +#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */ +#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */ +#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */ +#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */ +#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */ + +/* PHY XGXS lane state register. */ +#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001 +#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002 +#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004 +#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008 +#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000 + +/* PMA 10GBASE-T pair swap & polarity */ +#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */ +#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */ +#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */ + +/* PMA 10GBASE-T TX power register. */ +#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */ + +/* PMA 10GBASE-T SNR registers. */ +/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */ +#define MDIO_PMA_10GBT_SNR_BIAS 0x8000 +#define MDIO_PMA_10GBT_SNR_MAX 127 + +/* PMA 10GBASE-R FEC ability register. */ +#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */ +#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */ + +/* PCS 10GBASE-R/-T status register 1. */ +#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */ + +/* PCS 10GBASE-R/-T status register 2. */ +#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff +#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00 + +/* AN 10GBASE-T control register. */ +#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */ + +/* AN 10GBASE-T status register. */ +#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */ +#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */ +#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */ +#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */ +#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */ +#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */ +#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */ + +/* LASI RX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */ +#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */ +#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */ +#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */ +#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */ + +/* LASI TX_ALARM control/status registers. */ +#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */ +#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */ +#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */ +#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */ +#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */ +#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */ + +/* LASI control/status registers. */ +#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */ +#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */ +#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */ + +/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */ + +#define MDIO_PHY_ID_C45 0x8000 +#define MDIO_PHY_ID_PRTAD 0x03e0 +#define MDIO_PHY_ID_DEVAD 0x001f +#define MDIO_PHY_ID_C45_MASK \ + (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD) + +static inline __u16 mdio_phy_id_c45(int prtad, int devad) +{ + return MDIO_PHY_ID_C45 | (prtad << 5) | devad; +} + +static inline bool mdio_phy_id_is_c45(int phy_id) +{ + return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK); +} + +static inline __u16 mdio_phy_id_prtad(int phy_id) +{ + return (phy_id & MDIO_PHY_ID_PRTAD) >> 5; +} + +static inline __u16 mdio_phy_id_devad(int phy_id) +{ + return phy_id & MDIO_PHY_ID_DEVAD; +} + +#define MDIO_SUPPORTS_C22 1 +#define MDIO_SUPPORTS_C45 2 + +#ifdef __KERNEL__ + +/** + * struct mdio_if_info - Ethernet controller MDIO interface + * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown) + * @mmds: Mask of MMDs expected to be present in the PHY. This must be + * non-zero unless @prtad = %MDIO_PRTAD_NONE. + * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then + * MII register access will be passed through with @devad = + * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to + * commonly used clause 22 registers will be translated into + * clause 45 registers. + * @dev: Net device structure + * @mdio_read: Register read function; returns value or negative error code + * @mdio_write: Register write function; returns 0 or negative error code + */ +struct mdio_if_info { + int prtad; + u32 __bitwise mmds; + unsigned mode_support; + + struct net_device *dev; + int (*mdio_read)(struct net_device *dev, int prtad, int devad, + u16 addr); + int (*mdio_write)(struct net_device *dev, int prtad, int devad, + u16 addr, u16 val); +}; + +#define MDIO_PRTAD_NONE (-1) +#define MDIO_DEVAD_NONE (-1) +#define MDIO_EMULATE_C22 4 + +struct ethtool_cmd; +struct ethtool_pauseparam; +extern int mdio45_probe(struct mdio_if_info *mdio, int prtad); +extern int mdio_set_flag(const struct mdio_if_info *mdio, + int prtad, int devad, u16 addr, int mask, + bool sense); +extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds); +extern int mdio45_nway_restart(const struct mdio_if_info *mdio); +extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd, + u32 npage_adv, u32 npage_lpa); +extern void +mdio45_ethtool_spauseparam_an(const struct mdio_if_info *mdio, + const struct ethtool_pauseparam *ecmd); + +/** + * mdio45_ethtool_gset - get settings for ETHTOOL_GSET + * @mdio: MDIO interface + * @ecmd: Ethtool request structure + * + * Since the CSRs for auto-negotiation using next pages are not fully + * standardised, this function does not attempt to decode them. Use + * mdio45_ethtool_gset_npage() to specify advertisement bits from next + * pages. + */ +static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio, + struct ethtool_cmd *ecmd) +{ + mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0); +} + +extern int mdio_mii_ioctl(const struct mdio_if_info *mdio, + struct mii_ioctl_data *mii_data, int cmd); + +#endif /* __KERNEL__ */ +#endif /* __LINUX_MDIO_H__ */ diff --git a/include/linux/mii.h b/include/linux/mii.h index ad748588faf1..359fba880274 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -240,6 +240,22 @@ static inline unsigned int mii_duplex (unsigned int duplex_lock, } /** + * mii_advertise_flowctrl - get flow control advertisement flags + * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both) + */ +static inline u16 mii_advertise_flowctrl(int cap) +{ + u16 adv = 0; + + if (cap & FLOW_CTRL_RX) + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + if (cap & FLOW_CTRL_TX) + adv ^= ADVERTISE_PAUSE_ASYM; + + return adv; +} + +/** * mii_resolve_flowctrl_fdx * @lcladv: value of MII ADVERTISE register * @rmtadv: value of MII LPA register @@ -250,18 +266,12 @@ static inline u8 mii_resolve_flowctrl_fdx(u16 lcladv, u16 rmtadv) { u8 cap = 0; - if (lcladv & ADVERTISE_PAUSE_CAP) { - if (lcladv & ADVERTISE_PAUSE_ASYM) { - if (rmtadv & LPA_PAUSE_CAP) - cap = FLOW_CTRL_TX | FLOW_CTRL_RX; - else if (rmtadv & LPA_PAUSE_ASYM) - cap = FLOW_CTRL_RX; - } else { - if (rmtadv & LPA_PAUSE_CAP) - cap = FLOW_CTRL_TX | FLOW_CTRL_RX; - } - } else if (lcladv & ADVERTISE_PAUSE_ASYM) { - if ((rmtadv & LPA_PAUSE_CAP) && (rmtadv & LPA_PAUSE_ASYM)) + if (lcladv & rmtadv & ADVERTISE_PAUSE_CAP) { + cap = FLOW_CTRL_TX | FLOW_CTRL_RX; + } else if (lcladv & rmtadv & ADVERTISE_PAUSE_ASYM) { + if (lcladv & ADVERTISE_PAUSE_CAP) + cap = FLOW_CTRL_RX; + else if (rmtadv & ADVERTISE_PAUSE_CAP) cap = FLOW_CTRL_TX; } diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index ea1bf5ba092f..c7211ab6dd4b 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -25,5 +25,7 @@ #define SDIO_VENDOR_ID_MARVELL 0x02df #define SDIO_DEVICE_ID_MARVELL_LIBERTAS 0x9103 +#define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 +#define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #endif diff --git a/include/linux/net_dropmon.h b/include/linux/net_dropmon.h index 0e2e100c44a2..3ceb0cc1bc78 100644 --- a/include/linux/net_dropmon.h +++ b/include/linux/net_dropmon.h @@ -3,12 +3,20 @@ #include <linux/types.h> #include <linux/netlink.h> +#include <linux/types.h> struct net_dm_drop_point { __u8 pc[8]; __u32 count; }; +#define is_drop_point_hw(x) do {\ + int ____i, ____j;\ + for (____i = 0; ____i < 8; i ____i++)\ + ____j |= x[____i];\ + ____j;\ +} while (0) + #define NET_DM_CFG_VERSION 0 #define NET_DM_CFG_ALERT_COUNT 1 #define NET_DM_CFG_ALERT_DELAY 2 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 5a96a1a406e9..9ea8d6dfe540 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -39,9 +39,11 @@ #include <linux/device.h> #include <linux/percpu.h> +#include <linux/rculist.h> #include <linux/dmaengine.h> #include <linux/workqueue.h> +#include <linux/ethtool.h> #include <net/net_namespace.h> #include <net/dsa.h> #ifdef CONFIG_DCB @@ -49,7 +51,6 @@ #endif struct vlan_group; -struct ethtool_ops; struct netpoll_info; /* 802.11 specific */ struct wireless_dev; @@ -210,6 +211,19 @@ struct dev_addr_list #define dmi_users da_users #define dmi_gusers da_gusers +struct netdev_hw_addr { + struct list_head list; + unsigned char addr[MAX_ADDR_LEN]; + unsigned char type; +#define NETDEV_HW_ADDR_T_LAN 1 +#define NETDEV_HW_ADDR_T_SAN 2 +#define NETDEV_HW_ADDR_T_SLAVE 3 +#define NETDEV_HW_ADDR_T_UNICAST 4 + int refcount; + bool synced; + struct rcu_head rcu_head; +}; + struct hh_cache { struct hh_cache *hh_next; /* Next entry */ @@ -447,12 +461,25 @@ enum netdev_queue_state_t }; struct netdev_queue { +/* + * read mostly part + */ struct net_device *dev; struct Qdisc *qdisc; unsigned long state; - spinlock_t _xmit_lock; - int xmit_lock_owner; struct Qdisc *qdisc_sleeping; +/* + * write mostly part + */ + spinlock_t _xmit_lock ____cacheline_aligned_in_smp; + int xmit_lock_owner; + /* + * please use this field instead of dev->trans_start + */ + unsigned long trans_start; + unsigned long tx_bytes; + unsigned long tx_packets; + unsigned long tx_dropped; } ____cacheline_aligned_in_smp; @@ -670,7 +697,9 @@ struct net_device #define NETIF_F_GRO 16384 /* Generic receive offload */ #define NETIF_F_LRO 32768 /* large receive offload */ +/* the GSO_MASK reserves bits 16 through 23 */ #define NETIF_F_FCOE_CRC (1 << 24) /* FCoE CRC32 */ +#define NETIF_F_SCTP_CSUM (1 << 25) /* SCTP checksum offload */ /* Segmentation offload features */ #define NETIF_F_GSO_SHIFT 16 @@ -747,10 +776,11 @@ struct net_device unsigned char addr_len; /* hardware address length */ unsigned short dev_id; /* for shared network cards */ - spinlock_t addr_list_lock; - struct dev_addr_list *uc_list; /* Secondary unicast mac addresses */ + struct list_head uc_list; /* Secondary unicast mac + addresses */ int uc_count; /* Number of installed ucasts */ int uc_promisc; + spinlock_t addr_list_lock; struct dev_addr_list *mc_list; /* Multicast mac addresses */ int mc_count; /* Number of installed mcasts */ unsigned int promiscuity; @@ -776,8 +806,11 @@ struct net_device */ unsigned long last_rx; /* Time of last Rx */ /* Interface address info used in eth_type_trans() */ - unsigned char dev_addr[MAX_ADDR_LEN]; /* hw address, (before bcast - because most packets are unicast) */ + unsigned char *dev_addr; /* hw address, (before bcast + because most packets are + unicast) */ + + struct list_head dev_addr_list; /* list of device hw addresses */ unsigned char broadcast[MAX_ADDR_LEN]; /* hw bcast add */ @@ -797,6 +830,11 @@ struct net_device * One part is mostly used on xmit path (device) */ /* These may be needed for future network-power-down code. */ + + /* + * trans_start here is expensive for high speed devices on SMP, + * please use netdev_queue->trans_start instead. + */ unsigned long trans_start; /* Time (in jiffies) of last Tx */ int watchdog_timeo; /* used by dev_watchdog() */ @@ -867,49 +905,10 @@ struct net_device /* max exchange id for FCoE LRO by ddp */ unsigned int fcoe_ddp_xid; #endif - -#ifdef CONFIG_COMPAT_NET_DEV_OPS - struct { - int (*init)(struct net_device *dev); - void (*uninit)(struct net_device *dev); - int (*open)(struct net_device *dev); - int (*stop)(struct net_device *dev); - int (*hard_start_xmit) (struct sk_buff *skb, - struct net_device *dev); - u16 (*select_queue)(struct net_device *dev, - struct sk_buff *skb); - void (*change_rx_flags)(struct net_device *dev, - int flags); - void (*set_rx_mode)(struct net_device *dev); - void (*set_multicast_list)(struct net_device *dev); - int (*set_mac_address)(struct net_device *dev, - void *addr); - int (*validate_addr)(struct net_device *dev); - int (*do_ioctl)(struct net_device *dev, - struct ifreq *ifr, int cmd); - int (*set_config)(struct net_device *dev, - struct ifmap *map); - int (*change_mtu)(struct net_device *dev, int new_mtu); - int (*neigh_setup)(struct net_device *dev, - struct neigh_parms *); - void (*tx_timeout) (struct net_device *dev); - struct net_device_stats* (*get_stats)(struct net_device *dev); - void (*vlan_rx_register)(struct net_device *dev, - struct vlan_group *grp); - void (*vlan_rx_add_vid)(struct net_device *dev, - unsigned short vid); - void (*vlan_rx_kill_vid)(struct net_device *dev, - unsigned short vid); -#ifdef CONFIG_NET_POLL_CONTROLLER - void (*poll_controller)(struct net_device *dev); -#endif - }; -#endif }; #define to_net_dev(d) container_of(d, struct net_device, dev) #define NETDEV_ALIGN 32 -#define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1) static inline struct netdev_queue *netdev_get_tx_queue(const struct net_device *dev, @@ -980,9 +979,7 @@ static inline bool netdev_uses_trailer_tags(struct net_device *dev) */ static inline void *netdev_priv(const struct net_device *dev) { - return (char *)dev + ((sizeof(struct net_device) - + NETDEV_ALIGN_CONST) - & ~NETDEV_ALIGN_CONST); + return (char *)dev + ALIGN(sizeof(struct net_device), NETDEV_ALIGN); } /* Set the sysfs physical device reference for the network logical device @@ -1012,6 +1009,12 @@ void netif_napi_add(struct net_device *dev, struct napi_struct *napi, void netif_napi_del(struct napi_struct *napi); struct napi_gro_cb { + /* Virtual address of skb_shinfo(skb)->frags[0].page + offset. */ + void *frag0; + + /* Length of frag0. */ + unsigned int frag0_len; + /* This indicates where we are processing relative to skb->data. */ int data_offset; @@ -1047,14 +1050,6 @@ struct packet_type { struct list_head list; }; -struct napi_gro_fraginfo { - skb_frag_t frags[MAX_SKB_FRAGS]; - unsigned int nr_frags; - unsigned int ip_summed; - unsigned int len; - __wsum csum; -}; - #include <linux/interrupt.h> #include <linux/notifier.h> @@ -1119,9 +1114,9 @@ extern int dev_restart(struct net_device *dev); #ifdef CONFIG_NETPOLL_TRAP extern int netpoll_trap(void); #endif -extern void *skb_gro_header(struct sk_buff *skb, unsigned int hlen); extern int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb); +extern void skb_gro_reset_offset(struct sk_buff *skb); static inline unsigned int skb_gro_offset(const struct sk_buff *skb) { @@ -1138,16 +1133,34 @@ static inline void skb_gro_pull(struct sk_buff *skb, unsigned int len) NAPI_GRO_CB(skb)->data_offset += len; } -static inline void skb_gro_reset_offset(struct sk_buff *skb) +static inline void *skb_gro_header_fast(struct sk_buff *skb, + unsigned int offset) { - NAPI_GRO_CB(skb)->data_offset = 0; + return NAPI_GRO_CB(skb)->frag0 + offset; +} + +static inline int skb_gro_header_hard(struct sk_buff *skb, unsigned int hlen) +{ + return NAPI_GRO_CB(skb)->frag0_len < hlen; +} + +static inline void *skb_gro_header_slow(struct sk_buff *skb, unsigned int hlen, + unsigned int offset) +{ + NAPI_GRO_CB(skb)->frag0 = NULL; + NAPI_GRO_CB(skb)->frag0_len = 0; + return pskb_may_pull(skb, hlen) ? skb->data + offset : NULL; } static inline void *skb_gro_mac_header(struct sk_buff *skb) { - return skb_mac_header(skb) < skb->data ? skb_mac_header(skb) : - page_address(skb_shinfo(skb)->frags[0].page) + - skb_shinfo(skb)->frags[0].page_offset; + return NAPI_GRO_CB(skb)->frag0 ?: skb_mac_header(skb); +} + +static inline void *skb_gro_network_header(struct sk_buff *skb) +{ + return (NAPI_GRO_CB(skb)->frag0 ?: skb->data) + + skb_network_offset(skb); } static inline int dev_hard_header(struct sk_buff *skb, struct net_device *dev, @@ -1442,12 +1455,18 @@ extern int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb); extern void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb); -extern struct sk_buff * napi_fraginfo_skb(struct napi_struct *napi, - struct napi_gro_fraginfo *info); +extern struct sk_buff * napi_get_frags(struct napi_struct *napi); extern int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret); -extern int napi_gro_frags(struct napi_struct *napi, - struct napi_gro_fraginfo *info); +extern struct sk_buff * napi_frags_skb(struct napi_struct *napi); +extern int napi_gro_frags(struct napi_struct *napi); + +static inline void napi_free_frags(struct napi_struct *napi) +{ + kfree_skb(napi->skb); + napi->skb = NULL; +} + extern void netif_nit_deliver(struct sk_buff *skb); extern int dev_valid_name(const char *name); extern int dev_ioctl(struct net *net, unsigned int cmd, void __user *); @@ -1514,6 +1533,8 @@ static inline int netif_carrier_ok(const struct net_device *dev) return !test_bit(__LINK_STATE_NOCARRIER, &dev->state); } +extern unsigned long dev_trans_start(struct net_device *dev); + extern void __netdev_watchdog_up(struct net_device *dev); extern void netif_carrier_on(struct net_device *dev); @@ -1671,6 +1692,12 @@ static inline void __netif_tx_unlock_bh(struct netdev_queue *txq) spin_unlock_bh(&txq->_xmit_lock); } +static inline void txq_trans_update(struct netdev_queue *txq) +{ + if (txq->xmit_lock_owner != -1) + txq->trans_start = jiffies; +} + /** * netif_tx_lock - grab network device transmit lock * @dev: network device @@ -1778,6 +1805,13 @@ static inline void netif_addr_unlock_bh(struct net_device *dev) spin_unlock_bh(&dev->addr_list_lock); } +/* + * dev_addr_list walker. Should be used only for read access. Call with + * rcu_read_lock held. + */ +#define for_each_dev_addr(dev, ha) \ + list_for_each_entry_rcu(ha, &dev->dev_addr_list, list) + /* These functions live elsewhere (drivers/net/net_init.c, but related) */ extern void ether_setup(struct net_device *dev); @@ -1790,11 +1824,24 @@ extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name, alloc_netdev_mq(sizeof_priv, name, setup, 1) extern int register_netdev(struct net_device *dev); extern void unregister_netdev(struct net_device *dev); + +/* Functions used for device addresses handling */ +extern int dev_addr_add(struct net_device *dev, unsigned char *addr, + unsigned char addr_type); +extern int dev_addr_del(struct net_device *dev, unsigned char *addr, + unsigned char addr_type); +extern int dev_addr_add_multiple(struct net_device *to_dev, + struct net_device *from_dev, + unsigned char addr_type); +extern int dev_addr_del_multiple(struct net_device *to_dev, + struct net_device *from_dev, + unsigned char addr_type); + /* Functions used for secondary unicast and multicast support */ extern void dev_set_rx_mode(struct net_device *dev); extern void __dev_set_rx_mode(struct net_device *dev); -extern int dev_unicast_delete(struct net_device *dev, void *addr, int alen); -extern int dev_unicast_add(struct net_device *dev, void *addr, int alen); +extern int dev_unicast_delete(struct net_device *dev, void *addr); +extern int dev_unicast_add(struct net_device *dev, void *addr); extern int dev_unicast_sync(struct net_device *to, struct net_device *from); extern void dev_unicast_unsync(struct net_device *to, struct net_device *from); extern int dev_mc_delete(struct net_device *dev, void *addr, int alen, int all); @@ -1856,15 +1903,14 @@ static inline int net_gso_ok(int features, int gso_type) static inline int skb_gso_ok(struct sk_buff *skb, int features) { - return net_gso_ok(features, skb_shinfo(skb)->gso_type); + return net_gso_ok(features, skb_shinfo(skb)->gso_type) && + (!skb_has_frags(skb) || (features & NETIF_F_FRAGLIST)); } static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb) { return skb_is_gso(skb) && (!skb_gso_ok(skb, dev->features) || - (skb_shinfo(skb)->frag_list && - !(dev->features & NETIF_F_FRAGLIST)) || unlikely(skb->ip_summed != CHECKSUM_PARTIAL)); } @@ -1874,6 +1920,16 @@ static inline void netif_set_gso_max_size(struct net_device *dev, dev->gso_max_size = size; } +static inline void skb_bond_set_mac_by_master(struct sk_buff *skb, + struct net_device *master) +{ + if (skb->pkt_type == PACKET_HOST) { + u16 *dest = (u16 *) eth_hdr(skb)->h_dest; + + memcpy(dest, master->dev_addr, ETH_ALEN); + } +} + /* On bonding slaves other than the currently active slave, suppress * duplicates except for 802.3ad ETH_P_SLOW, alb non-mcast/bcast, and * ARP on active-backup slaves with arp_validate enabled. @@ -1887,6 +1943,14 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) if (master->priv_flags & IFF_MASTER_ARPMON) dev->last_rx = jiffies; + if ((master->priv_flags & IFF_MASTER_ALB) && master->br_port) { + /* Do address unmangle. The local destination address + * will be always the one master has. Provides the right + * functionality in a bridge. + */ + skb_bond_set_mac_by_master(skb, master); + } + if (dev->priv_flags & IFF_SLAVE_INACTIVE) { if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && skb->protocol == __cpu_to_be16(ETH_P_ARP)) @@ -1908,6 +1972,28 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) } extern struct pernet_operations __net_initdata loopback_net_ops; + +static inline int dev_ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_settings) + return -EOPNOTSUPP; + return dev->ethtool_ops->get_settings(dev, cmd); +} + +static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_rx_csum) + return 0; + return dev->ethtool_ops->get_rx_csum(dev); +} + +static inline u32 dev_ethtool_get_flags(struct net_device *dev) +{ + if (!dev->ethtool_ops || !dev->ethtool_ops->get_flags) + return 0; + return dev->ethtool_ops->get_flags(dev); +} #endif /* __KERNEL__ */ -#endif /* _LINUX_DEV_H */ +#endif /* _LINUX_NETDEVICE_H */ diff --git a/include/linux/netfilter/Kbuild b/include/linux/netfilter/Kbuild index af9d2fb97212..2aea50399c0b 100644 --- a/include/linux/netfilter/Kbuild +++ b/include/linux/netfilter/Kbuild @@ -33,6 +33,7 @@ header-y += xt_limit.h header-y += xt_mac.h header-y += xt_mark.h header-y += xt_multiport.h +header-y += xt_osf.h header-y += xt_owner.h header-y += xt_pkttype.h header-y += xt_quota.h diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h index 885cbe282260..a8248ee422b7 100644 --- a/include/linux/netfilter/nf_conntrack_common.h +++ b/include/linux/netfilter/nf_conntrack_common.h @@ -75,75 +75,6 @@ enum ip_conntrack_status { IPS_FIXED_TIMEOUT = (1 << IPS_FIXED_TIMEOUT_BIT), }; -/* Connection tracking event bits */ -enum ip_conntrack_events -{ - /* New conntrack */ - IPCT_NEW_BIT = 0, - IPCT_NEW = (1 << IPCT_NEW_BIT), - - /* Expected connection */ - IPCT_RELATED_BIT = 1, - IPCT_RELATED = (1 << IPCT_RELATED_BIT), - - /* Destroyed conntrack */ - IPCT_DESTROY_BIT = 2, - IPCT_DESTROY = (1 << IPCT_DESTROY_BIT), - - /* Timer has been refreshed */ - IPCT_REFRESH_BIT = 3, - IPCT_REFRESH = (1 << IPCT_REFRESH_BIT), - - /* Status has changed */ - IPCT_STATUS_BIT = 4, - IPCT_STATUS = (1 << IPCT_STATUS_BIT), - - /* Update of protocol info */ - IPCT_PROTOINFO_BIT = 5, - IPCT_PROTOINFO = (1 << IPCT_PROTOINFO_BIT), - - /* Volatile protocol info */ - IPCT_PROTOINFO_VOLATILE_BIT = 6, - IPCT_PROTOINFO_VOLATILE = (1 << IPCT_PROTOINFO_VOLATILE_BIT), - - /* New helper for conntrack */ - IPCT_HELPER_BIT = 7, - IPCT_HELPER = (1 << IPCT_HELPER_BIT), - - /* Update of helper info */ - IPCT_HELPINFO_BIT = 8, - IPCT_HELPINFO = (1 << IPCT_HELPINFO_BIT), - - /* Volatile helper info */ - IPCT_HELPINFO_VOLATILE_BIT = 9, - IPCT_HELPINFO_VOLATILE = (1 << IPCT_HELPINFO_VOLATILE_BIT), - - /* NAT info */ - IPCT_NATINFO_BIT = 10, - IPCT_NATINFO = (1 << IPCT_NATINFO_BIT), - - /* Counter highest bit has been set, unused */ - IPCT_COUNTER_FILLING_BIT = 11, - IPCT_COUNTER_FILLING = (1 << IPCT_COUNTER_FILLING_BIT), - - /* Mark is set */ - IPCT_MARK_BIT = 12, - IPCT_MARK = (1 << IPCT_MARK_BIT), - - /* NAT sequence adjustment */ - IPCT_NATSEQADJ_BIT = 13, - IPCT_NATSEQADJ = (1 << IPCT_NATSEQADJ_BIT), - - /* Secmark is set */ - IPCT_SECMARK_BIT = 14, - IPCT_SECMARK = (1 << IPCT_SECMARK_BIT), -}; - -enum ip_conntrack_expect_events { - IPEXP_NEW_BIT = 0, - IPEXP_NEW = (1 << IPEXP_NEW_BIT), -}; - #ifdef __KERNEL__ struct ip_conntrack_stat { diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h index b2f384d42611..4352feed2377 100644 --- a/include/linux/netfilter/nf_conntrack_tcp.h +++ b/include/linux/netfilter/nf_conntrack_tcp.h @@ -15,7 +15,8 @@ enum tcp_conntrack { TCP_CONNTRACK_LAST_ACK, TCP_CONNTRACK_TIME_WAIT, TCP_CONNTRACK_CLOSE, - TCP_CONNTRACK_LISTEN, + TCP_CONNTRACK_LISTEN, /* obsolete */ +#define TCP_CONNTRACK_SYN_SENT2 TCP_CONNTRACK_LISTEN TCP_CONNTRACK_MAX, TCP_CONNTRACK_IGNORE }; diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index c600083cbdf5..bff4d5741d98 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -46,7 +46,8 @@ struct nfgenmsg { #define NFNL_SUBSYS_CTNETLINK_EXP 2 #define NFNL_SUBSYS_QUEUE 3 #define NFNL_SUBSYS_ULOG 4 -#define NFNL_SUBSYS_COUNT 5 +#define NFNL_SUBSYS_OSF 5 +#define NFNL_SUBSYS_COUNT 6 #ifdef __KERNEL__ @@ -75,7 +76,7 @@ extern int nfnetlink_subsys_unregister(const struct nfnetlink_subsystem *n); extern int nfnetlink_has_listeners(unsigned int group); extern int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, - int echo); + int echo, gfp_t flags); extern void nfnetlink_set_err(u32 pid, u32 group, int error); extern int nfnetlink_unicast(struct sk_buff *skb, u_int32_t pid, int flags); diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 1a865e48b8eb..ed4ef8d0b11b 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -101,6 +101,7 @@ enum ctattr_protoinfo_dccp { CTA_PROTOINFO_DCCP_UNSPEC, CTA_PROTOINFO_DCCP_STATE, CTA_PROTOINFO_DCCP_ROLE, + CTA_PROTOINFO_DCCP_HANDSHAKE_SEQ, __CTA_PROTOINFO_DCCP_MAX, }; #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1) diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index c9efe039dc57..1030b7593898 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -184,9 +184,10 @@ struct xt_counters_info * @matchinfo: per-match data * @fragoff: packet is a fragment, this is the data offset * @thoff: position of transport header relative to skb->data - * @hotdrop: drop packet if we had inspection problems + * @hook: hook number given packet came from * @family: Actual NFPROTO_* through which the function is invoked * (helpful when match->family == NFPROTO_UNSPEC) + * @hotdrop: drop packet if we had inspection problems */ struct xt_match_param { const struct net_device *in, *out; @@ -194,8 +195,9 @@ struct xt_match_param { const void *matchinfo; int fragoff; unsigned int thoff; - bool *hotdrop; + unsigned int hooknum; u_int8_t family; + bool *hotdrop; }; /** diff --git a/include/linux/netfilter/xt_NFQUEUE.h b/include/linux/netfilter/xt_NFQUEUE.h index 982a89f78272..2584f4a777de 100644 --- a/include/linux/netfilter/xt_NFQUEUE.h +++ b/include/linux/netfilter/xt_NFQUEUE.h @@ -15,4 +15,9 @@ struct xt_NFQ_info { __u16 queuenum; }; +struct xt_NFQ_info_v1 { + __u16 queuenum; + __u16 queues_total; +}; + #endif /* _XT_NFQ_TARGET_H */ diff --git a/include/linux/netfilter/xt_osf.h b/include/linux/netfilter/xt_osf.h new file mode 100644 index 000000000000..fd2272e0959a --- /dev/null +++ b/include/linux/netfilter/xt_osf.h @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2003+ Evgeniy Polyakov <johnpol@2ka.mxt.ru> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _XT_OSF_H +#define _XT_OSF_H + +#define MAXGENRELEN 32 + +#define XT_OSF_GENRE (1<<0) +#define XT_OSF_TTL (1<<1) +#define XT_OSF_LOG (1<<2) +#define XT_OSF_INVERT (1<<3) + +#define XT_OSF_LOGLEVEL_ALL 0 /* log all matched fingerprints */ +#define XT_OSF_LOGLEVEL_FIRST 1 /* log only the first matced fingerprint */ +#define XT_OSF_LOGLEVEL_ALL_KNOWN 2 /* do not log unknown packets */ + +#define XT_OSF_TTL_TRUE 0 /* True ip and fingerprint TTL comparison */ +#define XT_OSF_TTL_LESS 1 /* Check if ip TTL is less than fingerprint one */ +#define XT_OSF_TTL_NOCHECK 2 /* Do not compare ip and fingerprint TTL at all */ + +struct xt_osf_info { + char genre[MAXGENRELEN]; + __u32 len; + __u32 flags; + __u32 loglevel; + __u32 ttl; +}; + +/* + * Wildcard MSS (kind of). + * It is used to implement a state machine for the different wildcard values + * of the MSS and window sizes. + */ +struct xt_osf_wc { + __u32 wc; + __u32 val; +}; + +/* + * This struct represents IANA options + * http://www.iana.org/assignments/tcp-parameters + */ +struct xt_osf_opt { + __u16 kind, length; + struct xt_osf_wc wc; +}; + +struct xt_osf_user_finger { + struct xt_osf_wc wss; + + __u8 ttl, df; + __u16 ss, mss; + __u16 opt_num; + + char genre[MAXGENRELEN]; + char version[MAXGENRELEN]; + char subtype[MAXGENRELEN]; + + /* MAX_IPOPTLEN is maximum if all options are NOPs or EOLs */ + struct xt_osf_opt opt[MAX_IPOPTLEN]; +}; + +struct xt_osf_nlmsg { + struct xt_osf_user_finger f; + struct iphdr ip; + struct tcphdr tcp; +}; + +/* Defines for IANA option kinds */ + +enum iana_options { + OSFOPT_EOL = 0, /* End of options */ + OSFOPT_NOP, /* NOP */ + OSFOPT_MSS, /* Maximum segment size */ + OSFOPT_WSO, /* Window scale option */ + OSFOPT_SACKP, /* SACK permitted */ + OSFOPT_SACK, /* SACK */ + OSFOPT_ECHO, + OSFOPT_ECHOREPLY, + OSFOPT_TS, /* Timestamp option */ + OSFOPT_POCP, /* Partial Order Connection Permitted */ + OSFOPT_POSP, /* Partial Order Service Profile */ + + /* Others are not used in the current OSF */ + OSFOPT_EMPTY = 255, +}; + +/* + * Initial window size option state machine: multiple of mss, mtu or + * plain numeric value. Can also be made as plain numeric value which + * is not a multiple of specified value. + */ +enum xt_osf_window_size_options { + OSF_WSS_PLAIN = 0, + OSF_WSS_MSS, + OSF_WSS_MTU, + OSF_WSS_MODULO, + OSF_WSS_MAX, +}; + +/* + * Add/remove fingerprint from the kernel. + */ +enum xt_osf_msg_types { + OSF_MSG_ADD, + OSF_MSG_REMOVE, + OSF_MSG_MAX, +}; + +enum xt_osf_attr_type { + OSF_ATTR_UNSPEC, + OSF_ATTR_FINGER, + OSF_ATTR_MAX, +}; + +#endif /* _XT_OSF_H */ diff --git a/include/linux/netfilter/xt_socket.h b/include/linux/netfilter/xt_socket.h new file mode 100644 index 000000000000..6f475b8ff34b --- /dev/null +++ b/include/linux/netfilter/xt_socket.h @@ -0,0 +1,12 @@ +#ifndef _XT_SOCKET_H +#define _XT_SOCKET_H + +enum { + XT_SOCKET_TRANSPARENT = 1 << 0, +}; + +struct xt_socket_mtinfo1 { + __u8 flags; +}; + +#endif /* _XT_SOCKET_H */ diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index cbe8ce3bf486..dbea93b694e5 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -7,7 +7,7 @@ * Copyright 2008 Michael Wu <flamingice@sourmilk.net> * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> * Copyright 2008 Michael Buesch <mb@bu3sch.de> - * Copyright 2008 Luis R. Rodriguez <lrodriguez@atheros.com> + * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> * Copyright 2008 Colin McCabe <colin@cozybit.com> * @@ -25,6 +25,8 @@ * */ +#include <linux/types.h> + /** * DOC: Station handling * @@ -46,8 +48,10 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, and/or - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -75,8 +79,8 @@ * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, - * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC and %NL80211_ATTR_KEY_CIPHER - * attributes. + * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, + * and %NL80211_ATTR_KEY_SEQ attributes. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX * or %NL80211_ATTR_MAC. * @@ -166,6 +170,22 @@ * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on * to (%NL80211_ATTR_REG_ALPHA2). + * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon + * has been found while world roaming thus enabling active scan or + * any mode of operation that initiates TX (beacons) on a channel + * where we would not have been able to do either before. As an example + * if you are world roaming (regulatory domain set to world or if your + * driver is using a custom world roaming regulatory domain) and while + * doing a passive scan on the 5 GHz band you find an AP there (if not + * on a DFS channel) you will now be able to actively scan for that AP + * or use AP mode on your card on that same channel. Note that this will + * never be used for channels 1-11 on the 2 GHz band as they are always + * enabled world wide. This beacon hint is only sent if your device had + * either disabled active scanning or beaconing on a channel. We send to + * userspace the wiphy on which we removed a restriction from + * (%NL80211_ATTR_WIPHY) and the channel on which this occurred + * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) + * the beacon hint was processed. * * @NL80211_CMD_AUTHENTICATE: authentication request and notification. * This command is used both as a command (request to authenticate) and @@ -185,8 +205,12 @@ * frame, i.e., it was for the local STA and was received in correct * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the * MLME SAP interface (kernel providing MLME, userspace SME). The - * included NL80211_ATTR_FRAME attribute contains the management frame - * (including both the header and frame body, but not FCS). + * included %NL80211_ATTR_FRAME attribute contains the management frame + * (including both the header and frame body, but not FCS). This event is + * also used to indicate if the authentication attempt timed out. In that + * case the %NL80211_ATTR_FRAME attribute is replaced with a + * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which + * pending authentication timed out). * @NL80211_CMD_ASSOCIATE: association request and notification; like * NL80211_CMD_AUTHENTICATE but for Association and Reassociation * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, @@ -199,6 +223,25 @@ * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). * + * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael + * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the + * event includes %NL80211_ATTR_MAC to describe the source MAC address of + * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key + * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and + * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this + * event matches with MLME-MICHAELMICFAILURE.indication() primitive + * + * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a + * FREQ attribute (for the initial frequency if no peer can be found) + * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those + * should be fixed rather than automatically determined. Can only be + * executed on a network interface that is UP, and fixed BSSID/FREQ + * may be rejected. Another optional parameter is the beacon interval, + * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not + * given defaults to 100 TU (102.4ms). + * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is + * determined by the network interface. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -260,6 +303,13 @@ enum nl80211_commands { NL80211_CMD_DEAUTHENTICATE, NL80211_CMD_DISASSOCIATE, + NL80211_CMD_MICHAEL_MIC_FAILURE, + + NL80211_CMD_REG_BEACON_HINT, + + NL80211_CMD_JOIN_IBSS, + NL80211_CMD_LEAVE_IBSS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -278,6 +328,7 @@ enum nl80211_commands { #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE +#define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT /** * enum nl80211_attrs - nl80211 netlink attributes @@ -296,6 +347,18 @@ enum nl80211_commands { * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is + * less than or equal to the RTS threshold; allowed range: 1..255; + * dot11ShortRetryLimit; u8 + * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is + * greater than the RTS threshold; allowed range: 1..255; + * dot11ShortLongLimit; u8 + * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum + * length in octets for frames; allowed range: 256..8000, disable + * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 + * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length + * larger than or equal to this use RTS/CTS handshake); allowed range: + * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -319,7 +382,7 @@ enum nl80211_commands { * * @NL80211_ATTR_STA_AID: Association ID for the station (u16) * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of - * &enum nl80211_sta_flags. + * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by * IEEE 802.11 7.3.1.6 (u16). * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported @@ -380,6 +443,8 @@ enum nl80211_commands { * * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with * a single scan request, a wiphy attribute. + * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements + * that can be added to a scan request * * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive @@ -408,6 +473,44 @@ enum nl80211_commands { * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and * %NL80211_CMD_DISASSOCIATE, u16 * + * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as + * a u32 + * + * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _before_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change + * due to considerations from a beacon hint. This attribute reflects + * the state of the channel _after_ the beacon hint processing. This + * attributes consists of a nested attribute containing + * NL80211_FREQUENCY_ATTR_* + * + * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported + * cipher suites + * + * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look + * for other networks on different channels + * + * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this + * is used, e.g., with %NL80211_CMD_AUTHENTICATE event + * + * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is + * used for the association (&enum nl80211_mfp, represented as a u32); + * this attribute can be used + * with %NL80211_CMD_ASSOCIATE request + * + * @NL80211_ATTR_STA_FLAGS2: Attribute containing a + * &struct nl80211_sta_flag_update. + * + * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls + * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in + * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE + * request, the driver will assume that the port is unauthorized until + * authorized by user space. Otherwise, port is marked authorized by + * default in station mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -492,6 +595,30 @@ enum nl80211_attrs { NL80211_ATTR_AUTH_TYPE, NL80211_ATTR_REASON_CODE, + NL80211_ATTR_KEY_TYPE, + + NL80211_ATTR_MAX_SCAN_IE_LEN, + NL80211_ATTR_CIPHER_SUITES, + + NL80211_ATTR_FREQ_BEFORE, + NL80211_ATTR_FREQ_AFTER, + + NL80211_ATTR_FREQ_FIXED, + + + NL80211_ATTR_WIPHY_RETRY_SHORT, + NL80211_ATTR_WIPHY_RETRY_LONG, + NL80211_ATTR_WIPHY_FRAG_THRESHOLD, + NL80211_ATTR_WIPHY_RTS_THRESHOLD, + + NL80211_ATTR_TIMED_OUT, + + NL80211_ATTR_USE_MFP, + + NL80211_ATTR_STA_FLAGS2, + + NL80211_ATTR_CONTROL_PORT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -581,6 +708,18 @@ enum nl80211_sta_flags { }; /** + * struct nl80211_sta_flag_update - station flags mask/set + * @mask: mask of station flags to set + * @set: which values to set them to + * + * Both mask and set contain bits as per &enum nl80211_sta_flags. + */ +struct nl80211_sta_flag_update { + __u32 mask; + __u32 set; +} __attribute__((packed)); + +/** * enum nl80211_rate_info - bitrate information * * These attribute types are used with %NL80211_STA_INFO_TXRATE @@ -1062,4 +1201,27 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, }; + +/** + * enum nl80211_key_type - Key Type + * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key + * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key + * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) + */ +enum nl80211_key_type { + NL80211_KEYTYPE_GROUP, + NL80211_KEYTYPE_PAIRWISE, + NL80211_KEYTYPE_PEERKEY, +}; + +/** + * enum nl80211_mfp - Management frame protection state + * @NL80211_MFP_NO: Management frame protection not used + * @NL80211_MFP_REQUIRED: Management frame protection required + */ +enum nl80211_mfp { + NL80211_MFP_NO, + NL80211_MFP_REQUIRED, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/nl802154.h b/include/linux/nl802154.h new file mode 100644 index 000000000000..2cda00ccfcca --- /dev/null +++ b/include/linux/nl802154.h @@ -0,0 +1,119 @@ +/* + * nl802154.h + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef NL802154_H +#define NL802154_H + +#define IEEE802154_NL_NAME "802.15.4 MAC" +#define IEEE802154_MCAST_COORD_NAME "coordinator" +#define IEEE802154_MCAST_BEACON_NAME "beacon" + +enum { + __IEEE802154_ATTR_INVALID, + + IEEE802154_ATTR_DEV_NAME, + IEEE802154_ATTR_DEV_INDEX, + + IEEE802154_ATTR_STATUS, + + IEEE802154_ATTR_SHORT_ADDR, + IEEE802154_ATTR_HW_ADDR, + IEEE802154_ATTR_PAN_ID, + + IEEE802154_ATTR_CHANNEL, + + IEEE802154_ATTR_COORD_SHORT_ADDR, + IEEE802154_ATTR_COORD_HW_ADDR, + IEEE802154_ATTR_COORD_PAN_ID, + + IEEE802154_ATTR_SRC_SHORT_ADDR, + IEEE802154_ATTR_SRC_HW_ADDR, + IEEE802154_ATTR_SRC_PAN_ID, + + IEEE802154_ATTR_DEST_SHORT_ADDR, + IEEE802154_ATTR_DEST_HW_ADDR, + IEEE802154_ATTR_DEST_PAN_ID, + + IEEE802154_ATTR_CAPABILITY, + IEEE802154_ATTR_REASON, + IEEE802154_ATTR_SCAN_TYPE, + IEEE802154_ATTR_CHANNELS, + IEEE802154_ATTR_DURATION, + IEEE802154_ATTR_ED_LIST, + IEEE802154_ATTR_BCN_ORD, + IEEE802154_ATTR_SF_ORD, + IEEE802154_ATTR_PAN_COORD, + IEEE802154_ATTR_BAT_EXT, + IEEE802154_ATTR_COORD_REALIGN, + IEEE802154_ATTR_SEC, + + __IEEE802154_ATTR_MAX, +}; + +#define IEEE802154_ATTR_MAX (__IEEE802154_ATTR_MAX - 1) + +extern struct nla_policy ieee802154_policy[]; + +/* commands */ +/* REQ should be responded with CONF + * and INDIC with RESP + */ +enum { + __IEEE802154_COMMAND_INVALID, + + IEEE802154_ASSOCIATE_REQ, + IEEE802154_ASSOCIATE_CONF, + IEEE802154_DISASSOCIATE_REQ, + IEEE802154_DISASSOCIATE_CONF, + IEEE802154_GET_REQ, + IEEE802154_GET_CONF, + IEEE802154_RESET_REQ, + IEEE802154_RESET_CONF, + IEEE802154_SCAN_REQ, + IEEE802154_SCAN_CONF, + IEEE802154_SET_REQ, + IEEE802154_SET_CONF, + IEEE802154_START_REQ, + IEEE802154_START_CONF, + IEEE802154_SYNC_REQ, + IEEE802154_POLL_REQ, + IEEE802154_POLL_CONF, + + IEEE802154_ASSOCIATE_INDIC, + IEEE802154_ASSOCIATE_RESP, + IEEE802154_DISASSOCIATE_INDIC, + IEEE802154_BEACON_NOTIFY_INDIC, + IEEE802154_ORPHAN_INDIC, + IEEE802154_ORPHAN_RESP, + IEEE802154_COMM_STATUS_INDIC, + IEEE802154_SYNC_LOSS_INDIC, + + IEEE802154_GTS_REQ, /* Not supported yet */ + IEEE802154_GTS_INDIC, /* Not supported yet */ + IEEE802154_GTS_CONF, /* Not supported yet */ + IEEE802154_RX_ENABLE_REQ, /* Not supported yet */ + IEEE802154_RX_ENABLE_CONF, /* Not supported yet */ + + __IEEE802154_CMD_MAX, +}; + +#define IEEE802154_CMD_MAX (__IEEE802154_CMD_MAX - 1) + +#endif diff --git a/include/linux/notifier.h b/include/linux/notifier.h index b86fa2ffca0c..81bc252dc8ac 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -198,6 +198,7 @@ static inline int notifier_to_errno(int ret) #define NETDEV_CHANGENAME 0x000A #define NETDEV_FEAT_CHANGE 0x000B #define NETDEV_BONDING_FAILOVER 0x000C +#define NETDEV_PRE_UP 0x000D #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN diff --git a/include/linux/of.h b/include/linux/of.h index 6a7efa242f5e..7be2d1043c16 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -77,6 +77,9 @@ extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( const struct of_device_id *matches, const struct device_node *node); extern int of_modalias_node(struct device_node *node, char *modalias, int len); +extern struct device_node *of_parse_phandle(struct device_node *np, + const char *phandle_name, + int index); extern int of_parse_phandles_with_args(struct device_node *np, const char *list_name, const char *cells_name, int index, struct device_node **out_node, const void **out_args); diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h new file mode 100644 index 000000000000..c9663c690303 --- /dev/null +++ b/include/linux/of_mdio.h @@ -0,0 +1,22 @@ +/* + * OF helpers for the MDIO (Ethernet PHY) API + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * + * This file is released under the GPLv2 + */ + +#ifndef __LINUX_OF_MDIO_H +#define __LINUX_OF_MDIO_H + +#include <linux/phy.h> +#include <linux/of.h> + +extern int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np); +extern struct phy_device *of_phy_find_device(struct device_node *phy_np); +extern struct phy_device *of_phy_connect(struct net_device *dev, + struct device_node *phy_np, + void (*hndlr)(struct net_device *), + u32 flags, phy_interface_t iface); + +#endif /* __LINUX_OF_MDIO_H */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9f36e1cdbf01..3435c1f3effa 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1067,8 +1067,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 -#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037 -#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 @@ -1079,21 +1077,16 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 #define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 -#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056 -#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057 #define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 #define PCI_DEVICE_ID_NVIDIA_CK804_PCIE 0x005d #define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 #define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 -#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066 #define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM 0x0069 #define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 -#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086 #define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM 0x0089 #define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO 0x008a -#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c #define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT 0x0090 #define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX 0x0091 @@ -1109,15 +1102,12 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 #define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 #define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM 0x00d9 #define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da -#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df #define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6 #define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO 0x00ea #define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee #define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0 @@ -1177,7 +1167,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 #define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc #define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM 0x01c1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3 #define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 #define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 @@ -1200,8 +1189,6 @@ #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F -#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 -#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 #define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 @@ -1248,46 +1235,21 @@ #define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C #define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E -#define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372 #define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 -#define PCI_DEVICE_ID_NVIDIA_NVENET_16 0x03E5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_17 0x03E6 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS 0x03EB #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC -#define PCI_DEVICE_ID_NVIDIA_NVENET_18 0x03EE -#define PCI_DEVICE_ID_NVIDIA_NVENET_19 0x03EF #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS 0x0446 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE 0x0448 -#define PCI_DEVICE_ID_NVIDIA_NVENET_20 0x0450 -#define PCI_DEVICE_ID_NVIDIA_NVENET_21 0x0451 -#define PCI_DEVICE_ID_NVIDIA_NVENET_22 0x0452 -#define PCI_DEVICE_ID_NVIDIA_NVENET_23 0x0453 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_SMBUS 0x0542 -#define PCI_DEVICE_ID_NVIDIA_NVENET_24 0x054C -#define PCI_DEVICE_ID_NVIDIA_NVENET_25 0x054D -#define PCI_DEVICE_ID_NVIDIA_NVENET_26 0x054E -#define PCI_DEVICE_ID_NVIDIA_NVENET_27 0x054F -#define PCI_DEVICE_ID_NVIDIA_NVENET_28 0x07DC -#define PCI_DEVICE_ID_NVIDIA_NVENET_29 0x07DD -#define PCI_DEVICE_ID_NVIDIA_NVENET_30 0x07DE -#define PCI_DEVICE_ID_NVIDIA_NVENET_31 0x07DF #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP78S_SMBUS 0x0752 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759 -#define PCI_DEVICE_ID_NVIDIA_NVENET_32 0x0760 -#define PCI_DEVICE_ID_NVIDIA_NVENET_33 0x0761 -#define PCI_DEVICE_ID_NVIDIA_NVENET_34 0x0762 -#define PCI_DEVICE_ID_NVIDIA_NVENET_35 0x0763 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_SMBUS 0x07D8 #define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP79_SMBUS 0x0AA2 -#define PCI_DEVICE_ID_NVIDIA_NVENET_36 0x0AB0 -#define PCI_DEVICE_ID_NVIDIA_NVENET_37 0x0AB1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_38 0x0AB2 -#define PCI_DEVICE_ID_NVIDIA_NVENET_39 0x0AB3 #define PCI_VENDOR_ID_IMS 0x10e0 #define PCI_DEVICE_ID_IMS_TT128 0x9128 @@ -1926,6 +1888,8 @@ #define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540 #define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550 #define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552 +#define PCI_SUBDEVICE_ID_CCD_JHSE1 0xB553 +#define PCI_SUBDEVICE_ID_CCD_JH8S 0xB55B #define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560 #define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562 #define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563 @@ -2328,6 +2292,8 @@ #define PCI_VENDOR_ID_QMI 0x1a32 +#define PCI_VENDOR_ID_AZWAVE 0x1a3b + #define PCI_VENDOR_ID_TEKRAM 0x1de1 #define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 diff --git a/include/linux/phy.h b/include/linux/phy.h index 97e40cb6b588..b1368b8f6572 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -79,7 +79,7 @@ typedef enum { * Need to be a little smaller than phydev->dev.bus_id to leave room * for the ":%02x" */ -#define MII_BUS_ID_SIZE (BUS_ID_SIZE - 3) +#define MII_BUS_ID_SIZE (20 - 3) /* * The Bus class for PHYs. Devices which provide access to @@ -407,7 +407,7 @@ struct phy_driver { /* A Structure for boards to register fixups with the PHY Lib */ struct phy_fixup { struct list_head list; - char bus_id[BUS_ID_SIZE]; + char bus_id[20]; u32 phy_uid; u32 phy_uid_mask; int (*run)(struct phy_device *phydev); @@ -444,10 +444,16 @@ static inline int phy_write(struct phy_device *phydev, u16 regnum, u16 val) int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); +int phy_device_register(struct phy_device *phy); int phy_clear_interrupt(struct phy_device *phydev); int phy_config_interrupt(struct phy_device *phydev, u32 interrupts); +int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, + u32 flags, phy_interface_t interface); struct phy_device * phy_attach(struct net_device *dev, const char *bus_id, u32 flags, phy_interface_t interface); +int phy_connect_direct(struct net_device *dev, struct phy_device *phydev, + void (*handler)(struct net_device *), u32 flags, + phy_interface_t interface); struct phy_device * phy_connect(struct net_device *dev, const char *bus_id, void (*handler)(struct net_device *), u32 flags, phy_interface_t interface); diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h index 164332cbb77c..16e39c7a67fc 100644 --- a/include/linux/rfkill.h +++ b/include/linux/rfkill.h @@ -4,6 +4,7 @@ /* * Copyright (C) 2006 - 2007 Ivo van Doorn * Copyright (C) 2007 Dmitry Torokhov + * Copyright 2009 Johannes Berg <johannes@sipsolutions.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,131 +23,331 @@ */ #include <linux/types.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/mutex.h> -#include <linux/device.h> -#include <linux/leds.h> + +/* define userspace visible states */ +#define RFKILL_STATE_SOFT_BLOCKED 0 +#define RFKILL_STATE_UNBLOCKED 1 +#define RFKILL_STATE_HARD_BLOCKED 2 /** * enum rfkill_type - type of rfkill switch. - * RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. - * RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. - * RFKILL_TYPE_UWB: switch is on a ultra wideband device. - * RFKILL_TYPE_WIMAX: switch is on a WiMAX device. - * RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * + * @RFKILL_TYPE_ALL: toggles all switches (userspace only) + * @RFKILL_TYPE_WLAN: switch is on a 802.11 wireless network device. + * @RFKILL_TYPE_BLUETOOTH: switch is on a bluetooth device. + * @RFKILL_TYPE_UWB: switch is on a ultra wideband device. + * @RFKILL_TYPE_WIMAX: switch is on a WiMAX device. + * @RFKILL_TYPE_WWAN: switch is on a wireless WAN device. + * @NUM_RFKILL_TYPES: number of defined rfkill types */ enum rfkill_type { - RFKILL_TYPE_WLAN , + RFKILL_TYPE_ALL = 0, + RFKILL_TYPE_WLAN, RFKILL_TYPE_BLUETOOTH, RFKILL_TYPE_UWB, RFKILL_TYPE_WIMAX, RFKILL_TYPE_WWAN, - RFKILL_TYPE_MAX, + NUM_RFKILL_TYPES, }; -enum rfkill_state { - RFKILL_STATE_SOFT_BLOCKED = 0, /* Radio output blocked */ - RFKILL_STATE_UNBLOCKED = 1, /* Radio output allowed */ - RFKILL_STATE_HARD_BLOCKED = 2, /* Output blocked, non-overrideable */ - RFKILL_STATE_MAX, /* marker for last valid state */ +/** + * enum rfkill_operation - operation types + * @RFKILL_OP_ADD: a device was added + * @RFKILL_OP_DEL: a device was removed + * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device + * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + */ +enum rfkill_operation { + RFKILL_OP_ADD = 0, + RFKILL_OP_DEL, + RFKILL_OP_CHANGE, + RFKILL_OP_CHANGE_ALL, }; -/* - * These are DEPRECATED, drivers using them should be verified to - * comply with the rfkill usage guidelines in Documentation/rfkill.txt - * and then converted to use the new names for rfkill_state - */ -#define RFKILL_STATE_OFF RFKILL_STATE_SOFT_BLOCKED -#define RFKILL_STATE_ON RFKILL_STATE_UNBLOCKED - -/** - * struct rfkill - rfkill control structure. - * @name: Name of the switch. - * @type: Radio type which the button controls, the value stored - * here should be a value from enum rfkill_type. - * @state: State of the switch, "UNBLOCKED" means radio can operate. - * @user_claim_unsupported: Whether the hardware supports exclusive - * RF-kill control by userspace. Set this before registering. - * @user_claim: Set when the switch is controlled exlusively by userspace. - * @mutex: Guards switch state transitions. It serializes callbacks - * and also protects the state. - * @data: Pointer to the RF button drivers private data which will be - * passed along when toggling radio state. - * @toggle_radio(): Mandatory handler to control state of the radio. - * only RFKILL_STATE_SOFT_BLOCKED and RFKILL_STATE_UNBLOCKED are - * valid parameters. - * @get_state(): handler to read current radio state from hardware, - * may be called from atomic context, should return 0 on success. - * Either this handler OR judicious use of rfkill_force_state() is - * MANDATORY for any driver capable of RFKILL_STATE_HARD_BLOCKED. - * @led_trigger: A LED trigger for this button's LED. - * @dev: Device structure integrating the switch into device tree. - * @node: Used to place switch into list of all switches known to the - * the system. - * - * This structure represents a RF switch located on a network device. - */ -struct rfkill { - const char *name; - enum rfkill_type type; - - bool user_claim_unsupported; - bool user_claim; - - /* the mutex serializes callbacks and also protects - * the state */ - struct mutex mutex; - enum rfkill_state state; - void *data; - int (*toggle_radio)(void *data, enum rfkill_state state); - int (*get_state)(void *data, enum rfkill_state *state); +/** + * struct rfkill_event - events for userspace on /dev/rfkill + * @idx: index of dev rfkill + * @type: type of the rfkill struct + * @op: operation code + * @hard: hard state (0/1) + * @soft: soft state (0/1) + * + * Structure used for userspace communication on /dev/rfkill, + * used for events from the kernel and control to the kernel. + */ +struct rfkill_event { + __u32 idx; + __u8 type; + __u8 op; + __u8 soft, hard; +} __packed; -#ifdef CONFIG_RFKILL_LEDS - struct led_trigger led_trigger; -#endif +/* ioctl for turning off rfkill-input (if present) */ +#define RFKILL_IOC_MAGIC 'R' +#define RFKILL_IOC_NOINPUT 1 +#define RFKILL_IOCTL_NOINPUT _IO(RFKILL_IOC_MAGIC, RFKILL_IOC_NOINPUT) + +/* and that's all userspace gets */ +#ifdef __KERNEL__ +/* don't allow anyone to use these in the kernel */ +enum rfkill_user_states { + RFKILL_USER_STATE_SOFT_BLOCKED = RFKILL_STATE_SOFT_BLOCKED, + RFKILL_USER_STATE_UNBLOCKED = RFKILL_STATE_UNBLOCKED, + RFKILL_USER_STATE_HARD_BLOCKED = RFKILL_STATE_HARD_BLOCKED, +}; +#undef RFKILL_STATE_SOFT_BLOCKED +#undef RFKILL_STATE_UNBLOCKED +#undef RFKILL_STATE_HARD_BLOCKED + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/device.h> +#include <linux/leds.h> +#include <linux/err.h> + +/* this is opaque */ +struct rfkill; - struct device dev; - struct list_head node; - enum rfkill_state state_for_resume; +/** + * struct rfkill_ops - rfkill driver methods + * + * @poll: poll the rfkill block state(s) -- only assign this method + * when you need polling. When called, simply call one of the + * rfkill_set{,_hw,_sw}_state family of functions. If the hw + * is getting unblocked you need to take into account the return + * value of those functions to make sure the software block is + * properly used. + * @query: query the rfkill block state(s) and call exactly one of the + * rfkill_set{,_hw,_sw}_state family of functions. Assign this + * method if input events can cause hardware state changes to make + * the rfkill core query your driver before setting a requested + * block. + * @set_block: turn the transmitter on (blocked == false) or off + * (blocked == true) -- ignore and return 0 when hard blocked. + * This callback must be assigned. + */ +struct rfkill_ops { + void (*poll)(struct rfkill *rfkill, void *data); + void (*query)(struct rfkill *rfkill, void *data); + int (*set_block)(void *data, bool blocked); }; -#define to_rfkill(d) container_of(d, struct rfkill, dev) -struct rfkill * __must_check rfkill_allocate(struct device *parent, - enum rfkill_type type); -void rfkill_free(struct rfkill *rfkill); +#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE) +/** + * rfkill_alloc - allocate rfkill structure + * @name: name of the struct -- the string is not copied internally + * @parent: device that has rf switch on it + * @type: type of the switch (RFKILL_TYPE_*) + * @ops: rfkill methods + * @ops_data: data passed to each method + * + * This function should be called by the transmitter driver to allocate an + * rfkill structure. Returns %NULL on failure. + */ +struct rfkill * __must_check rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data); + +/** + * rfkill_register - Register a rfkill structure. + * @rfkill: rfkill structure to be registered + * + * This function should be called by the transmitter driver to register + * the rfkill structure. Before calling this function the driver needs + * to be ready to service method calls from rfkill. + * + * If the software blocked state is not set before registration, + * set_block will be called to initialize it to a default value. + * + * If the hardware blocked state is not set before registration, + * it is assumed to be unblocked. + */ int __must_check rfkill_register(struct rfkill *rfkill); + +/** + * rfkill_pause_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_pause_polling(struct rfkill *rfkill); + +/** + * rfkill_resume_polling(struct rfkill *rfkill) + * + * Pause polling -- say transmitter is off for other reasons. + * NOTE: not necessary for suspend/resume -- in that case the + * core stops polling anyway + */ +void rfkill_resume_polling(struct rfkill *rfkill); + + +/** + * rfkill_unregister - Unregister a rfkill structure. + * @rfkill: rfkill structure to be unregistered + * + * This function should be called by the network driver during device + * teardown to destroy rfkill structure. Until it returns, the driver + * needs to be able to service method calls. + */ void rfkill_unregister(struct rfkill *rfkill); -int rfkill_force_state(struct rfkill *rfkill, enum rfkill_state state); -int rfkill_set_default(enum rfkill_type type, enum rfkill_state state); +/** + * rfkill_destroy - free rfkill structure + * @rfkill: rfkill structure to be destroyed + * + * Destroys the rfkill structure. + */ +void rfkill_destroy(struct rfkill *rfkill); + +/** + * rfkill_set_hw_state - Set the internal rfkill hardware block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current hardware block state to set + * + * rfkill drivers that get events when the hard-blocked state changes + * use this function to notify the rfkill core (and through that also + * userspace) of the current state. They should also use this after + * resume if the state could have changed. + * + * You need not (but may) call this function if poll_state is assigned. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked) so that drivers need not keep track of the soft + * block state -- which they might not be able to. + */ +bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_sw_state - Set the internal rfkill software block state + * @rfkill: pointer to the rfkill class to modify. + * @state: the current software block state to set + * + * rfkill drivers that get events when the soft-blocked state changes + * (yes, some platforms directly act on input but allow changing again) + * use this function to notify the rfkill core (and through that also + * userspace) of the current state. It is not necessary to notify on + * resume; since hibernation can always change the soft-blocked state, + * the rfkill core will unconditionally restore the previous state. + * + * This function can be called in any context, even from within rfkill + * callbacks. + * + * The function returns the combined block state (true if transmitter + * should be blocked). + */ +bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked); + +/** + * rfkill_set_states - Set the internal rfkill block states + * @rfkill: pointer to the rfkill class to modify. + * @sw: the current software block state to set + * @hw: the current hardware block state to set + * + * This function can be called in any context, even from within rfkill + * callbacks. + */ +void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw); /** - * rfkill_state_complement - return complementar state - * @state: state to return the complement of + * rfkill_blocked - query rfkill block * - * Returns RFKILL_STATE_SOFT_BLOCKED if @state is RFKILL_STATE_UNBLOCKED, - * returns RFKILL_STATE_UNBLOCKED otherwise. + * @rfkill: rfkill struct to query */ -static inline enum rfkill_state rfkill_state_complement(enum rfkill_state state) +bool rfkill_blocked(struct rfkill *rfkill); +#else /* !RFKILL */ +static inline struct rfkill * __must_check +rfkill_alloc(const char *name, + struct device *parent, + const enum rfkill_type type, + const struct rfkill_ops *ops, + void *ops_data) +{ + return ERR_PTR(-ENODEV); +} + +static inline int __must_check rfkill_register(struct rfkill *rfkill) +{ + if (rfkill == ERR_PTR(-ENODEV)) + return 0; + return -EINVAL; +} + +static inline void rfkill_pause_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_resume_polling(struct rfkill *rfkill) +{ +} + +static inline void rfkill_unregister(struct rfkill *rfkill) +{ +} + +static inline void rfkill_destroy(struct rfkill *rfkill) +{ +} + +static inline bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked) +{ + return blocked; +} + +static inline bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked) { - return (state == RFKILL_STATE_UNBLOCKED) ? - RFKILL_STATE_SOFT_BLOCKED : RFKILL_STATE_UNBLOCKED; + return blocked; } +static inline void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw) +{ +} + +static inline bool rfkill_blocked(struct rfkill *rfkill) +{ + return false; +} +#endif /* RFKILL || RFKILL_MODULE */ + + +#ifdef CONFIG_RFKILL_LEDS /** - * rfkill_get_led_name - Get the LED trigger name for the button's LED. + * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED. * This function might return a NULL pointer if registering of the - * LED trigger failed. - * Use this as "default_trigger" for the LED. + * LED trigger failed. Use this as "default_trigger" for the LED. */ -static inline char *rfkill_get_led_name(struct rfkill *rfkill) -{ -#ifdef CONFIG_RFKILL_LEDS - return (char *)(rfkill->led_trigger.name); +const char *rfkill_get_led_trigger_name(struct rfkill *rfkill); + +/** + * rfkill_set_led_trigger_name -- set the LED trigger name + * @rfkill: rfkill struct + * @name: LED trigger name + * + * This function sets the LED trigger name of the radio LED + * trigger that rfkill creates. It is optional, but if called + * must be called before rfkill_register() to be effective. + */ +void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name); #else +static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill) +{ return NULL; -#endif } +static inline void +rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name) +{ +} +#endif + +#endif /* __KERNEL__ */ + #endif /* RFKILL_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 4896fdfec913..fea9d188dbff 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2212,6 +2212,12 @@ static inline int test_tsk_need_resched(struct task_struct *tsk) return unlikely(test_tsk_thread_flag(tsk,TIF_NEED_RESCHED)); } +static inline int restart_syscall(void) +{ + set_tsk_thread_flag(current, TIF_SIGPENDING); + return -ERESTARTNOINTR; +} + static inline int signal_pending(struct task_struct *p) { return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING)); diff --git a/include/linux/sctp.h b/include/linux/sctp.h index c2731bfe04d8..b464b9d3d242 100644 --- a/include/linux/sctp.h +++ b/include/linux/sctp.h @@ -487,17 +487,17 @@ typedef enum { * * Value Cause Code * --------- ---------------- - * 0x0100 Request to Delete Last Remaining IP Address. - * 0x0101 Operation Refused Due to Resource Shortage. - * 0x0102 Request to Delete Source IP Address. - * 0x0103 Association Aborted due to illegal ASCONF-ACK - * 0x0104 Request refused - no authorization. + * 0x00A0 Request to Delete Last Remaining IP Address. + * 0x00A1 Operation Refused Due to Resource Shortage. + * 0x00A2 Request to Delete Source IP Address. + * 0x00A3 Association Aborted due to illegal ASCONF-ACK + * 0x00A4 Request refused - no authorization. */ - SCTP_ERROR_DEL_LAST_IP = cpu_to_be16(0x0100), - SCTP_ERROR_RSRC_LOW = cpu_to_be16(0x0101), - SCTP_ERROR_DEL_SRC_IP = cpu_to_be16(0x0102), - SCTP_ERROR_ASCONF_ACK = cpu_to_be16(0x0103), - SCTP_ERROR_REQ_REFUSED = cpu_to_be16(0x0104), + SCTP_ERROR_DEL_LAST_IP = cpu_to_be16(0x00A0), + SCTP_ERROR_RSRC_LOW = cpu_to_be16(0x00A1), + SCTP_ERROR_DEL_SRC_IP = cpu_to_be16(0x00A2), + SCTP_ERROR_ASCONF_ACK = cpu_to_be16(0x00A3), + SCTP_ERROR_REQ_REFUSED = cpu_to_be16(0x00A4), /* AUTH Section 4. New Error Cause * diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 5fd389162f01..fa51293f2708 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -189,20 +189,23 @@ struct skb_shared_info { atomic_t dataref; unsigned short nr_frags; unsigned short gso_size; +#ifdef CONFIG_HAS_DMA + dma_addr_t dma_head; +#endif /* Warning: this field is not always filled in (UFO)! */ unsigned short gso_segs; unsigned short gso_type; __be32 ip6_frag_id; union skb_shared_tx tx_flags; -#ifdef CONFIG_HAS_DMA - unsigned int num_dma_maps; -#endif struct sk_buff *frag_list; struct skb_shared_hwtstamps hwtstamps; skb_frag_t frags[MAX_SKB_FRAGS]; #ifdef CONFIG_HAS_DMA - dma_addr_t dma_maps[MAX_SKB_FRAGS + 1]; + dma_addr_t dma_maps[MAX_SKB_FRAGS]; #endif + /* Intermediate layers must ensure that destructor_arg + * remains valid until skb destructor */ + void * destructor_arg; }; /* We divide dataref into two halves. The higher 16 bits hold references @@ -301,9 +304,6 @@ typedef unsigned char *sk_buff_data_t; * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) * @do_not_encrypt: set to prevent encryption of this frame - * @requeue: set to indicate that the wireless core should attempt - * a software retry on this frame if we failed to - * receive an ACK for it * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -319,10 +319,7 @@ struct sk_buff { ktime_t tstamp; struct net_device *dev; - union { - struct dst_entry *dst; - struct rtable *rtable; - }; + unsigned long _skb_dst; #ifdef CONFIG_XFRM struct sec_path *sp; #endif @@ -380,7 +377,6 @@ struct sk_buff { #endif #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) __u8 do_not_encrypt:1; - __u8 requeue:1; #endif /* 0/13/14 bit hole */ @@ -423,6 +419,21 @@ extern void skb_dma_unmap(struct device *dev, struct sk_buff *skb, enum dma_data_direction dir); #endif +static inline struct dst_entry *skb_dst(const struct sk_buff *skb) +{ + return (struct dst_entry *)skb->_skb_dst; +} + +static inline void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) +{ + skb->_skb_dst = (unsigned long)dst; +} + +static inline struct rtable *skb_rtable(const struct sk_buff *skb) +{ + return (struct rtable *)skb_dst(skb); +} + extern void kfree_skb(struct sk_buff *skb); extern void consume_skb(struct sk_buff *skb); extern void __kfree_skb(struct sk_buff *skb); @@ -1062,7 +1073,7 @@ extern void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off, int size); #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags) -#define SKB_FRAG_ASSERT(skb) BUG_ON(skb_shinfo(skb)->frag_list) +#define SKB_FRAG_ASSERT(skb) BUG_ON(skb_has_frags(skb)) #define SKB_LINEAR_ASSERT(skb) BUG_ON(skb_is_nonlinear(skb)) #ifdef NET_SKBUFF_DATA_USES_OFFSET @@ -1701,6 +1712,25 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) skb = skb->prev) +static inline bool skb_has_frags(const struct sk_buff *skb) +{ + return skb_shinfo(skb)->frag_list != NULL; +} + +static inline void skb_frag_list_init(struct sk_buff *skb) +{ + skb_shinfo(skb)->frag_list = NULL; +} + +static inline void skb_frag_add_head(struct sk_buff *skb, struct sk_buff *frag) +{ + frag->next = skb_shinfo(skb)->frag_list; + skb_shinfo(skb)->frag_list = frag; +} + +#define skb_walk_frags(skb, iter) \ + for (iter = skb_shinfo(skb)->frag_list; iter; iter = iter->next) + extern struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags, int *peeked, int *err); extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags, @@ -1715,8 +1745,14 @@ extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb, struct iovec *iov); extern int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset, - struct iovec *from, + const struct iovec *from, + int from_offset, int len); +extern int skb_copy_datagram_const_iovec(const struct sk_buff *from, + int offset, + const struct iovec *to, + int to_offset, + int size); extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags); diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h index b32725075d71..5241e4fb4eca 100644 --- a/include/linux/smsc911x.h +++ b/include/linux/smsc911x.h @@ -47,4 +47,14 @@ struct smsc911x_platform_config { #define SMSC911X_FORCE_EXTERNAL_PHY (BIT(3)) #define SMSC911X_SAVE_MAC_ADDRESS (BIT(4)) +/* + * SMSC911X_SWAP_FIFO: + * Enables software byte swap for fifo data. Should only be used as a + * "last resort" in the case of big endian mode on boards with incorrectly + * routed data bus to older devices such as LAN9118. Newer devices such as + * LAN9221 can handle this in hardware, there are registers to control + * this swapping but the driver doesn't currently use them. + */ +#define SMSC911X_SWAP_FIFO (BIT(5)) + #endif /* __LINUX_SMSC911X_H__ */ diff --git a/include/linux/snmp.h b/include/linux/snmp.h index aee3f1e1d1ce..0f953fe40413 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -18,7 +18,7 @@ enum { IPSTATS_MIB_NUM = 0, - IPSTATS_MIB_INRECEIVES, /* InReceives */ + IPSTATS_MIB_INPKTS, /* InReceives */ IPSTATS_MIB_INHDRERRORS, /* InHdrErrors */ IPSTATS_MIB_INTOOBIGERRORS, /* InTooBigErrors */ IPSTATS_MIB_INNOROUTES, /* InNoRoutes */ @@ -28,7 +28,7 @@ enum IPSTATS_MIB_INDISCARDS, /* InDiscards */ IPSTATS_MIB_INDELIVERS, /* InDelivers */ IPSTATS_MIB_OUTFORWDATAGRAMS, /* OutForwDatagrams */ - IPSTATS_MIB_OUTREQUESTS, /* OutRequests */ + IPSTATS_MIB_OUTPKTS, /* OutRequests */ IPSTATS_MIB_OUTDISCARDS, /* OutDiscards */ IPSTATS_MIB_OUTNOROUTES, /* OutNoRoutes */ IPSTATS_MIB_REASMTIMEOUT, /* ReasmTimeout */ @@ -42,6 +42,12 @@ enum IPSTATS_MIB_OUTMCASTPKTS, /* OutMcastPkts */ IPSTATS_MIB_INBCASTPKTS, /* InBcastPkts */ IPSTATS_MIB_OUTBCASTPKTS, /* OutBcastPkts */ + IPSTATS_MIB_INOCTETS, /* InOctets */ + IPSTATS_MIB_OUTOCTETS, /* OutOctets */ + IPSTATS_MIB_INMCASTOCTETS, /* InMcastOctets */ + IPSTATS_MIB_OUTMCASTOCTETS, /* OutMcastOctets */ + IPSTATS_MIB_INBCASTOCTETS, /* InBcastOctets */ + IPSTATS_MIB_OUTBCASTOCTETS, /* OutBcastOctets */ __IPSTATS_MIB_MAX }; diff --git a/include/linux/socket.h b/include/linux/socket.h index 421afb4d29b0..3b461dffe244 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -194,7 +194,8 @@ struct ucred { #define AF_RXRPC 33 /* RxRPC sockets */ #define AF_ISDN 34 /* mISDN sockets */ #define AF_PHONET 35 /* Phonet sockets */ -#define AF_MAX 36 /* For now.. */ +#define AF_IEEE802154 36 /* IEEE802154 sockets */ +#define AF_MAX 37 /* For now.. */ /* Protocol families, same as address families. */ #define PF_UNSPEC AF_UNSPEC @@ -233,6 +234,7 @@ struct ucred { #define PF_RXRPC AF_RXRPC #define PF_ISDN AF_ISDN #define PF_PHONET AF_PHONET +#define PF_IEEE802154 AF_IEEE802154 #define PF_MAX AF_MAX /* Maximum queue length specifiable by listen. */ @@ -303,14 +305,15 @@ struct ucred { #define SOL_BLUETOOTH 274 #define SOL_PNPIPE 275 #define SOL_RDS 276 +#define SOL_IUCV 277 /* IPX options */ #define IPX_TYPE 1 #ifdef __KERNEL__ extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len); -extern int memcpy_fromiovecend(unsigned char *kdata, struct iovec *iov, - int offset, int len); +extern int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov, + int offset, int len); extern int csum_partial_copy_fromiovecend(unsigned char *kdata, struct iovec *iov, int offset, @@ -318,6 +321,8 @@ extern int csum_partial_copy_fromiovecend(unsigned char *kdata, extern int verify_iovec(struct msghdr *m, struct iovec *iov, struct sockaddr *address, int mode); extern int memcpy_toiovec(struct iovec *v, unsigned char *kdata, int len); +extern int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata, + int offset, int len); extern int move_addr_to_user(struct sockaddr *kaddr, int klen, void __user *uaddr, int __user *ulen); extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr); extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); diff --git a/include/linux/spi/libertas_spi.h b/include/linux/spi/libertas_spi.h index 79506f5f9e67..1b5d5384fcd3 100644 --- a/include/linux/spi/libertas_spi.h +++ b/include/linux/spi/libertas_spi.h @@ -22,9 +22,6 @@ struct libertas_spi_platform_data { * speed, you may want to use 0 here. */ u16 use_dummy_writes; - /* GPIO number to use as chip select */ - u16 gpio_cs; - /* Board specific setup/teardown */ int (*setup)(struct spi_device *spi); int (*teardown)(struct spi_device *spi); diff --git a/include/linux/spi/wl12xx.h b/include/linux/spi/wl12xx.h new file mode 100644 index 000000000000..11430cab2aad --- /dev/null +++ b/include/linux/spi/wl12xx.h @@ -0,0 +1,31 @@ +/* + * This file is part of wl12xx + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Kalle Valo <kalle.valo@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef _LINUX_SPI_WL12XX_H +#define _LINUX_SPI_WL12XX_H + +struct wl12xx_platform_data { + void (*set_power)(bool enable); +}; + +#endif diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 9d5078bd23a3..8afac76cd748 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -377,7 +377,7 @@ struct tcp_sock { unsigned int keepalive_time; /* time before keep alive takes place */ unsigned int keepalive_intvl; /* time interval between keep alive probes */ - unsigned long last_synq_overflow; + int linger2; /* Receiver side RTT estimation */ struct { @@ -406,8 +406,6 @@ struct tcp_sock { /* TCP MD5 Signagure Option information */ struct tcp_md5sig_info *md5sig_info; #endif - - int linger2; }; static inline struct tcp_sock *tcp_sk(const struct sock *sk) diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index 36fabb95c7d3..5d44059f6d63 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -183,6 +183,7 @@ extern void usbnet_tx_timeout (struct net_device *net); extern int usbnet_change_mtu (struct net_device *net, int new_mtu); extern int usbnet_get_endpoints(struct usbnet *, struct usb_interface *); +extern int usbnet_get_ethernet_addr(struct usbnet *, int); extern void usbnet_defer_kevent (struct usbnet *, int); extern void usbnet_skb_return (struct usbnet *, struct sk_buff *); extern void usbnet_unlink_rx_urbs(struct usbnet *); diff --git a/include/linux/wimax.h b/include/linux/wimax.h index c89de7f4e5b9..4fdcc5635518 100644 --- a/include/linux/wimax.h +++ b/include/linux/wimax.h @@ -59,7 +59,7 @@ enum { * M - Major: change if removing or modifying an existing call. * m - minor: change when adding a new call */ - WIMAX_GNL_VERSION = 00, + WIMAX_GNL_VERSION = 01, /* Generic NetLink attributes */ WIMAX_GNL_ATTR_INVALID = 0x00, WIMAX_GNL_ATTR_MAX = 10, @@ -78,6 +78,7 @@ enum { WIMAX_GNL_OP_RFKILL, /* Run wimax_rfkill() */ WIMAX_GNL_OP_RESET, /* Run wimax_rfkill() */ WIMAX_GNL_RE_STATE_CHANGE, /* Report: status change */ + WIMAX_GNL_OP_STATE_GET, /* Request for current state */ }; @@ -113,6 +114,10 @@ enum { WIMAX_GNL_RESET_IFIDX = 1, }; +/* Atributes for wimax_state_get() */ +enum { + WIMAX_GNL_STGET_IFIDX = 1, +}; /* * Attributes for the Report State Change diff --git a/include/linux/wimax/i2400m.h b/include/linux/wimax/i2400m.h index d5148a7889a6..433693ef2bb0 100644 --- a/include/linux/wimax/i2400m.h +++ b/include/linux/wimax/i2400m.h @@ -266,7 +266,7 @@ enum i2400m_ro_type { /* Misc constants */ enum { - I2400M_PL_PAD = 16, /* Payload data size alignment */ + I2400M_PL_ALIGN = 16, /* Payload data size alignment */ I2400M_PL_SIZE_MAX = 0x3EFF, I2400M_MAX_PLS_IN_MSG = 60, /* protocol barkers: sync sequences; for notifications they diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 3ad5390a4dd5..968166a45f86 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -81,12 +81,6 @@ enum { BT_CLOSED }; -/* Endianness conversions */ -#define htobs(a) __cpu_to_le16(a) -#define htobl(a) __cpu_to_le32(a) -#define btohs(a) __le16_to_cpu(a) -#define btohl(a) __le32_to_cpu(a) - /* BD Address */ typedef struct { __u8 b[6]; @@ -171,15 +165,6 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l return skb; } -static inline int skb_frags_no(struct sk_buff *skb) -{ - register struct sk_buff *frag = skb_shinfo(skb)->frag_list; - register int n = 1; - - for (; frag; frag=frag->next, n++); - return n; -} - int bt_err(__u16 code); extern int hci_sock_init(void); diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 73aead222b32..c4ca4228b083 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -137,6 +137,8 @@ struct hci_dev { struct device *parent; struct device dev; + struct rfkill *rfkill; + struct module *owner; int (*open)(struct hci_dev *hdev); diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index f566aa1f0a4c..e919fca1072a 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -26,8 +26,13 @@ #define __L2CAP_H /* L2CAP defaults */ -#define L2CAP_DEFAULT_MTU 672 -#define L2CAP_DEFAULT_FLUSH_TO 0xFFFF +#define L2CAP_DEFAULT_MTU 672 +#define L2CAP_DEFAULT_FLUSH_TO 0xffff +#define L2CAP_DEFAULT_RX_WINDOW 1 +#define L2CAP_DEFAULT_MAX_RECEIVE 1 +#define L2CAP_DEFAULT_RETRANS_TO 300 /* 300 milliseconds */ +#define L2CAP_DEFAULT_MONITOR_TO 1000 /* 1 second */ +#define L2CAP_DEFAULT_MAX_RX_APDU 0xfff7 #define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */ #define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */ @@ -64,17 +69,29 @@ struct l2cap_conninfo { #define L2CAP_LM_SECURE 0x0020 /* L2CAP command codes */ -#define L2CAP_COMMAND_REJ 0x01 -#define L2CAP_CONN_REQ 0x02 -#define L2CAP_CONN_RSP 0x03 -#define L2CAP_CONF_REQ 0x04 -#define L2CAP_CONF_RSP 0x05 -#define L2CAP_DISCONN_REQ 0x06 -#define L2CAP_DISCONN_RSP 0x07 -#define L2CAP_ECHO_REQ 0x08 -#define L2CAP_ECHO_RSP 0x09 -#define L2CAP_INFO_REQ 0x0a -#define L2CAP_INFO_RSP 0x0b +#define L2CAP_COMMAND_REJ 0x01 +#define L2CAP_CONN_REQ 0x02 +#define L2CAP_CONN_RSP 0x03 +#define L2CAP_CONF_REQ 0x04 +#define L2CAP_CONF_RSP 0x05 +#define L2CAP_DISCONN_REQ 0x06 +#define L2CAP_DISCONN_RSP 0x07 +#define L2CAP_ECHO_REQ 0x08 +#define L2CAP_ECHO_RSP 0x09 +#define L2CAP_INFO_REQ 0x0a +#define L2CAP_INFO_RSP 0x0b + +/* L2CAP feature mask */ +#define L2CAP_FEAT_FLOWCTL 0x00000001 +#define L2CAP_FEAT_RETRANS 0x00000002 +#define L2CAP_FEAT_ERTM 0x00000008 +#define L2CAP_FEAT_STREAMING 0x00000010 +#define L2CAP_FEAT_FCS 0x00000020 +#define L2CAP_FEAT_FIXED_CHAN 0x00000080 + +/* L2CAP checksum option */ +#define L2CAP_FCS_NONE 0x00 +#define L2CAP_FCS_CRC16 0x01 /* L2CAP structures */ struct l2cap_hdr { @@ -106,17 +123,23 @@ struct l2cap_conn_rsp { __le16 status; } __attribute__ ((packed)); +/* channel indentifier */ +#define L2CAP_CID_SIGNALING 0x0001 +#define L2CAP_CID_CONN_LESS 0x0002 +#define L2CAP_CID_DYN_START 0x0040 +#define L2CAP_CID_DYN_END 0xffff + /* connect result */ -#define L2CAP_CR_SUCCESS 0x0000 -#define L2CAP_CR_PEND 0x0001 -#define L2CAP_CR_BAD_PSM 0x0002 -#define L2CAP_CR_SEC_BLOCK 0x0003 -#define L2CAP_CR_NO_MEM 0x0004 +#define L2CAP_CR_SUCCESS 0x0000 +#define L2CAP_CR_PEND 0x0001 +#define L2CAP_CR_BAD_PSM 0x0002 +#define L2CAP_CR_SEC_BLOCK 0x0003 +#define L2CAP_CR_NO_MEM 0x0004 /* connect status */ -#define L2CAP_CS_NO_INFO 0x0000 -#define L2CAP_CS_AUTHEN_PEND 0x0001 -#define L2CAP_CS_AUTHOR_PEND 0x0002 +#define L2CAP_CS_NO_INFO 0x0000 +#define L2CAP_CS_AUTHEN_PEND 0x0001 +#define L2CAP_CS_AUTHOR_PEND 0x0002 struct l2cap_conf_req { __le16 dcid; @@ -143,10 +166,14 @@ struct l2cap_conf_opt { } __attribute__ ((packed)); #define L2CAP_CONF_OPT_SIZE 2 +#define L2CAP_CONF_HINT 0x80 +#define L2CAP_CONF_MASK 0x7f + #define L2CAP_CONF_MTU 0x01 #define L2CAP_CONF_FLUSH_TO 0x02 #define L2CAP_CONF_QOS 0x03 #define L2CAP_CONF_RFC 0x04 +#define L2CAP_CONF_FCS 0x05 #define L2CAP_CONF_MAX_SIZE 22 @@ -162,6 +189,8 @@ struct l2cap_conf_rfc { #define L2CAP_MODE_BASIC 0x00 #define L2CAP_MODE_RETRANS 0x01 #define L2CAP_MODE_FLOWCTL 0x02 +#define L2CAP_MODE_ERTM 0x03 +#define L2CAP_MODE_STREAM 0x04 struct l2cap_disconn_req { __le16 dcid; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5389afdc1297..1a21895b732b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1,71 +1,220 @@ #ifndef __NET_CFG80211_H #define __NET_CFG80211_H +/* + * 802.11 device and configuration interface + * + * Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/netdevice.h> +#include <linux/debugfs.h> +#include <linux/list.h> #include <linux/netlink.h> #include <linux/skbuff.h> #include <linux/nl80211.h> #include <linux/if_ether.h> #include <linux/ieee80211.h> -#include <linux/wireless.h> -#include <net/iw_handler.h> -#include <net/genetlink.h> +#include <net/regulatory.h> + /* remove once we remove the wext stuff */ #include <net/iw_handler.h> +#include <linux/wireless.h> + /* - * 802.11 configuration in-kernel interface + * wireless hardware capability structures + */ + +/** + * enum ieee80211_band - supported frequency bands + * + * The bands are assigned this way because the supported + * bitrates differ in these bands. * - * Copyright 2006, 2007 Johannes Berg <johannes@sipsolutions.net> + * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band + * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) */ +enum ieee80211_band { + IEEE80211_BAND_2GHZ, + IEEE80211_BAND_5GHZ, + + /* keep last */ + IEEE80211_NUM_BANDS +}; /** - * struct vif_params - describes virtual interface parameters - * @mesh_id: mesh ID to use - * @mesh_id_len: length of the mesh ID + * enum ieee80211_channel_flags - channel flags + * + * Channel flags set by the regulatory control code. + * + * @IEEE80211_CHAN_DISABLED: This channel is disabled. + * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted + * on this channel. + * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. + * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. + * @IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel + * is not permitted. + * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel + * is not permitted. */ -struct vif_params { - u8 *mesh_id; - int mesh_id_len; +enum ieee80211_channel_flags { + IEEE80211_CHAN_DISABLED = 1<<0, + IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, + IEEE80211_CHAN_NO_IBSS = 1<<2, + IEEE80211_CHAN_RADAR = 1<<3, + IEEE80211_CHAN_NO_HT40PLUS = 1<<4, + IEEE80211_CHAN_NO_HT40MINUS = 1<<5, }; -/* Radiotap header iteration - * implemented in net/wireless/radiotap.c - * docs in Documentation/networking/radiotap-headers.txt +#define IEEE80211_CHAN_NO_HT40 \ + (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) + +/** + * struct ieee80211_channel - channel definition + * + * This structure describes a single channel for use + * with cfg80211. + * + * @center_freq: center frequency in MHz + * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz + * @hw_value: hardware-specific value for the channel + * @flags: channel flags from &enum ieee80211_channel_flags. + * @orig_flags: channel flags at registration time, used by regulatory + * code to support devices with additional restrictions + * @band: band this channel belongs to. + * @max_antenna_gain: maximum antenna gain in dBi + * @max_power: maximum transmission power (in dBm) + * @beacon_found: helper to regulatory code to indicate when a beacon + * has been found on this channel. Use regulatory_hint_found_beacon() + * to enable this, this is is useful only on 5 GHz band. + * @orig_mag: internal use + * @orig_mpwr: internal use */ +struct ieee80211_channel { + enum ieee80211_band band; + u16 center_freq; + u8 max_bandwidth; + u16 hw_value; + u32 flags; + int max_antenna_gain; + int max_power; + bool beacon_found; + u32 orig_flags; + int orig_mag, orig_mpwr; +}; + /** - * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args - * @rtheader: pointer to the radiotap header we are walking through - * @max_length: length of radiotap header in cpu byte ordering - * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg - * @this_arg: pointer to current radiotap arg - * @arg_index: internal next argument index - * @arg: internal next argument pointer - * @next_bitmap: internal pointer to next present u32 - * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + * enum ieee80211_rate_flags - rate flags + * + * Hardware/specification flags for rates. These are structured + * in a way that allows using the same bitrate structure for + * different bands/PHY modes. + * + * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short + * preamble on this bitrate; only relevant in 2.4GHz band and + * with CCK rates. + * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate + * when used with 802.11a (on the 5 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate + * when used with 802.11b (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate + * when used with 802.11g (on the 2.4 GHz band); filled by the + * core code when registering the wiphy. + * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. */ +enum ieee80211_rate_flags { + IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, + IEEE80211_RATE_MANDATORY_A = 1<<1, + IEEE80211_RATE_MANDATORY_B = 1<<2, + IEEE80211_RATE_MANDATORY_G = 1<<3, + IEEE80211_RATE_ERP_G = 1<<4, +}; -struct ieee80211_radiotap_iterator { - struct ieee80211_radiotap_header *rtheader; - int max_length; - int this_arg_index; - u8 *this_arg; +/** + * struct ieee80211_rate - bitrate definition + * + * This structure describes a bitrate that an 802.11 PHY can + * operate with. The two values @hw_value and @hw_value_short + * are only for driver use when pointers to this structure are + * passed around. + * + * @flags: rate-specific flags + * @bitrate: bitrate in units of 100 Kbps + * @hw_value: driver/hardware value for this rate + * @hw_value_short: driver/hardware value for this rate when + * short preamble is used + */ +struct ieee80211_rate { + u32 flags; + u16 bitrate; + u16 hw_value, hw_value_short; +}; - int arg_index; - u8 *arg; - __le32 *next_bitmap; - u32 bitmap_shifter; +/** + * struct ieee80211_sta_ht_cap - STA's HT capabilities + * + * This structure describes most essential parameters needed + * to describe 802.11n HT capabilities for an STA. + * + * @ht_supported: is HT supported by the STA + * @cap: HT capabilities map as described in 802.11n spec + * @ampdu_factor: Maximum A-MPDU length factor + * @ampdu_density: Minimum A-MPDU spacing + * @mcs: Supported MCS rates + */ +struct ieee80211_sta_ht_cap { + u16 cap; /* use IEEE80211_HT_CAP_ */ + bool ht_supported; + u8 ampdu_factor; + u8 ampdu_density; + struct ieee80211_mcs_info mcs; }; -extern int ieee80211_radiotap_iterator_init( - struct ieee80211_radiotap_iterator *iterator, - struct ieee80211_radiotap_header *radiotap_header, - int max_length); +/** + * struct ieee80211_supported_band - frequency band definition + * + * This structure describes a frequency band a wiphy + * is able to operate in. + * + * @channels: Array of channels the hardware can operate in + * in this band. + * @band: the band this structure represents + * @n_channels: Number of channels in @channels + * @bitrates: Array of bitrates the hardware can operate with + * in this band. Must be sorted to give a valid "supported + * rates" IE, i.e. CCK rates first, then OFDM. + * @n_bitrates: Number of bitrates in @bitrates + */ +struct ieee80211_supported_band { + struct ieee80211_channel *channels; + struct ieee80211_rate *bitrates; + enum ieee80211_band band; + int n_channels; + int n_bitrates; + struct ieee80211_sta_ht_cap ht_cap; +}; -extern int ieee80211_radiotap_iterator_next( - struct ieee80211_radiotap_iterator *iterator); +/* + * Wireless hardware/device configuration structures and methods + */ +/** + * struct vif_params - describes virtual interface parameters + * @mesh_id: mesh ID to use + * @mesh_id_len: length of the mesh ID + */ +struct vif_params { + u8 *mesh_id; + int mesh_id_len; +}; - /** +/** * struct key_params - key information * * Information about a key @@ -106,27 +255,6 @@ struct beacon_parameters { }; /** - * enum station_flags - station flags - * - * Station capability flags. Note that these must be the bits - * according to the nl80211 flags. - * - * @STATION_FLAG_CHANGED: station flags were changed - * @STATION_FLAG_AUTHORIZED: station is authorized to send frames (802.1X) - * @STATION_FLAG_SHORT_PREAMBLE: station is capable of receiving frames - * with short preambles - * @STATION_FLAG_WME: station is WME/QoS capable - * @STATION_FLAG_MFP: station uses management frame protection - */ -enum station_flags { - STATION_FLAG_CHANGED = 1<<0, - STATION_FLAG_AUTHORIZED = 1<<NL80211_STA_FLAG_AUTHORIZED, - STATION_FLAG_SHORT_PREAMBLE = 1<<NL80211_STA_FLAG_SHORT_PREAMBLE, - STATION_FLAG_WME = 1<<NL80211_STA_FLAG_WME, - STATION_FLAG_MFP = 1<<NL80211_STA_FLAG_MFP, -}; - -/** * enum plink_action - actions to perform in mesh peers * * @PLINK_ACTION_INVALID: action 0 is reserved @@ -148,14 +276,17 @@ enum plink_actions { * @supported_rates: supported rates in IEEE 802.11 format * (or NULL for no change) * @supported_rates_len: number of supported rates - * @station_flags: station flags (see &enum station_flags) + * @sta_flags_mask: station flags that changed + * (bitmask of BIT(NL80211_STA_FLAG_...)) + * @sta_flags_set: station flags values + * (bitmask of BIT(NL80211_STA_FLAG_...)) * @listen_interval: listen interval or -1 for no change * @aid: AID or zero for no change */ struct station_parameters { u8 *supported_rates; struct net_device *vlan; - u32 station_flags; + u32 sta_flags_mask, sta_flags_set; int listen_interval; u16 aid; u8 supported_rates_len; @@ -348,92 +479,6 @@ struct bss_parameters { u8 basic_rates_len; }; -/** - * enum environment_cap - Environment parsed from country IE - * @ENVIRON_ANY: indicates country IE applies to both indoor and - * outdoor operation. - * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation - * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation - */ -enum environment_cap { - ENVIRON_ANY, - ENVIRON_INDOOR, - ENVIRON_OUTDOOR, -}; - -/** - * struct regulatory_request - used to keep track of regulatory requests - * - * @wiphy_idx: this is set if this request's initiator is - * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This - * can be used by the wireless core to deal with conflicts - * and potentially inform users of which devices specifically - * cased the conflicts. - * @initiator: indicates who sent this request, could be any of - * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) - * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested - * regulatory domain. We have a few special codes: - * 00 - World regulatory domain - * 99 - built by driver but a specific alpha2 cannot be determined - * 98 - result of an intersection between two regulatory domains - * @intersect: indicates whether the wireless core should intersect - * the requested regulatory domain with the presently set regulatory - * domain. - * @country_ie_checksum: checksum of the last processed and accepted - * country IE - * @country_ie_env: lets us know if the AP is telling us we are outdoor, - * indoor, or if it doesn't matter - * @list: used to insert into the reg_requests_list linked list - */ -struct regulatory_request { - int wiphy_idx; - enum nl80211_reg_initiator initiator; - char alpha2[2]; - bool intersect; - u32 country_ie_checksum; - enum environment_cap country_ie_env; - struct list_head list; -}; - -struct ieee80211_freq_range { - u32 start_freq_khz; - u32 end_freq_khz; - u32 max_bandwidth_khz; -}; - -struct ieee80211_power_rule { - u32 max_antenna_gain; - u32 max_eirp; -}; - -struct ieee80211_reg_rule { - struct ieee80211_freq_range freq_range; - struct ieee80211_power_rule power_rule; - u32 flags; -}; - -struct ieee80211_regdomain { - u32 n_reg_rules; - char alpha2[2]; - struct ieee80211_reg_rule reg_rules[]; -}; - -#define MHZ_TO_KHZ(freq) ((freq) * 1000) -#define KHZ_TO_MHZ(freq) ((freq) / 1000) -#define DBI_TO_MBI(gain) ((gain) * 100) -#define MBI_TO_DBI(gain) ((gain) / 100) -#define DBM_TO_MBM(gain) ((gain) * 100) -#define MBM_TO_DBM(gain) ((gain) / 100) - -#define REG_RULE(start, end, bw, gain, eirp, reg_flags) { \ - .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ - .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ - .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ - .power_rule.max_antenna_gain = DBI_TO_MBI(gain), \ - .power_rule.max_eirp = DBM_TO_MBM(eirp), \ - .flags = reg_flags, \ - } - struct mesh_config { /* Timeouts in ms */ /* Mesh plink management parameters */ @@ -504,7 +549,7 @@ struct cfg80211_scan_request { int n_ssids; struct ieee80211_channel **channels; u32 n_channels; - u8 *ie; + const u8 *ie; size_t ie_len; /* internal */ @@ -612,6 +657,11 @@ struct cfg80211_auth_request { * @ssid_len: Length of ssid in octets * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets + * @use_mfp: Use management frame protection (IEEE 802.11w) in this association + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. */ struct cfg80211_assoc_request { struct ieee80211_channel *chan; @@ -620,6 +670,8 @@ struct cfg80211_assoc_request { size_t ssid_len; const u8 *ie; size_t ie_len; + bool use_mfp; + bool control_port; }; /** @@ -659,6 +711,60 @@ struct cfg80211_disassoc_request { }; /** + * struct cfg80211_ibss_params - IBSS parameters + * + * This structure defines the IBSS parameters for the join_ibss() + * method. + * + * @ssid: The SSID, will always be non-null. + * @ssid_len: The length of the SSID, will always be non-zero. + * @bssid: Fixed BSSID requested, maybe be %NULL, if set do not + * search for IBSSs with a different BSSID. + * @channel: The channel to use if no IBSS can be found to join. + * @channel_fixed: The channel should be fixed -- do not search for + * IBSSs to join on other channels. + * @ie: information element(s) to include in the beacon + * @ie_len: length of that + * @beacon_interval: beacon interval to use + */ +struct cfg80211_ibss_params { + u8 *ssid; + u8 *bssid; + struct ieee80211_channel *channel; + u8 *ie; + u8 ssid_len, ie_len; + u16 beacon_interval; + bool channel_fixed; +}; + +/** + * enum wiphy_params_flags - set_wiphy_params bitfield values + * WIPHY_PARAM_RETRY_SHORT: wiphy->retry_short has changed + * WIPHY_PARAM_RETRY_LONG: wiphy->retry_long has changed + * WIPHY_PARAM_FRAG_THRESHOLD: wiphy->frag_threshold has changed + * WIPHY_PARAM_RTS_THRESHOLD: wiphy->rts_threshold has changed + */ +enum wiphy_params_flags { + WIPHY_PARAM_RETRY_SHORT = 1 << 0, + WIPHY_PARAM_RETRY_LONG = 1 << 1, + WIPHY_PARAM_FRAG_THRESHOLD = 1 << 2, + WIPHY_PARAM_RTS_THRESHOLD = 1 << 3, +}; + +/** + * enum tx_power_setting - TX power adjustment + * + * @TX_POWER_AUTOMATIC: the dbm parameter is ignored + * @TX_POWER_LIMITED: limit TX power by the dbm parameter + * @TX_POWER_FIXED: fix TX power to the dbm parameter + */ +enum tx_power_setting { + TX_POWER_AUTOMATIC, + TX_POWER_LIMITED, + TX_POWER_FIXED, +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -688,10 +794,11 @@ struct cfg80211_disassoc_request { * @get_key: get information about the key with the given parameters. * @mac_addr will be %NULL when requesting information for a group * key. All pointers given to the @callback function need not be valid - * after it returns. + * after it returns. This function should return an error if it is + * not possible to retrieve the key, -ENOENT if it doesn't exist. * * @del_key: remove a key given the @mac_addr (%NULL for a group key) - * and @key_index + * and @key_index, return -ENOENT if the key doesn't exist. * * @set_default_key: set the default key on an interface * @@ -733,6 +840,23 @@ struct cfg80211_disassoc_request { * @assoc: Request to (re)associate with the specified peer * @deauth: Request to deauthenticate from the specified peer * @disassoc: Request to disassociate from the specified peer + * + * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call + * cfg80211_ibss_joined(), also call that function when changing BSSID due + * to a merge. + * @leave_ibss: Leave the IBSS. + * + * @set_wiphy_params: Notify that wiphy parameters have changed; + * @changed bitfield (see &enum wiphy_params_flags) describes which values + * have changed. The actual parameter values are available in + * struct wiphy. If returning an error, no value should be changed. + * + * @set_tx_power: set the transmit power according to the parameters + * @get_tx_power: store the current TX power into the dbm variable; + * return 0 if successful + * + * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting + * functions to adjust rfkill hw state */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -747,13 +871,13 @@ struct cfg80211_ops { struct vif_params *params); int (*add_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, + u8 key_index, const u8 *mac_addr, struct key_params *params); int (*get_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr, void *cookie, + u8 key_index, const u8 *mac_addr, void *cookie, void (*callback)(void *cookie, struct key_params*)); int (*del_key)(struct wiphy *wiphy, struct net_device *netdev, - u8 key_index, u8 *mac_addr); + u8 key_index, const u8 *mac_addr); int (*set_default_key)(struct wiphy *wiphy, struct net_device *netdev, u8 key_index); @@ -818,9 +942,473 @@ struct cfg80211_ops { struct cfg80211_deauth_request *req); int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_disassoc_request *req); + + int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ibss_params *params); + int (*leave_ibss)(struct wiphy *wiphy, struct net_device *dev); + + int (*set_wiphy_params)(struct wiphy *wiphy, u32 changed); + + int (*set_tx_power)(struct wiphy *wiphy, + enum tx_power_setting type, int dbm); + int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + + void (*rfkill_poll)(struct wiphy *wiphy); }; -/* temporary wext handlers */ +/* + * wireless hardware and networking interfaces structures + * and registration/helper functions + */ + +/** + * struct wiphy - wireless hardware description + * @idx: the wiphy index assigned to this item + * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> + * @custom_regulatory: tells us the driver for this device + * has its own custom regulatory domain and cannot identify the + * ISO / IEC 3166 alpha2 it belongs to. When this is enabled + * we will disregard the first regulatory hint (when the + * initiator is %REGDOM_SET_BY_CORE). + * @strict_regulatory: tells us the driver for this device will ignore + * regulatory domain settings until it gets its own regulatory domain + * via its regulatory_hint(). After its gets its own regulatory domain + * it will only allow further regulatory domain settings to further + * enhance compliance. For example if channel 13 and 14 are disabled + * by this regulatory domain no user regulatory domain can enable these + * channels at a later time. This can be used for devices which do not + * have calibration information gauranteed for frequencies or settings + * outside of its regulatory domain. + * @reg_notifier: the driver's regulatory notification callback + * @regd: the driver's regulatory domain, if one was requested via + * the regulatory_hint() API. This can be used by the driver + * on the reg_notifier() if it chooses to ignore future + * regulatory domain changes caused by other drivers. + * @signal_type: signal type reported in &struct cfg80211_bss. + * @cipher_suites: supported cipher suites + * @n_cipher_suites: number of supported cipher suites + * @retry_short: Retry limit for short frames (dot11ShortRetryLimit) + * @retry_long: Retry limit for long frames (dot11LongRetryLimit) + * @frag_threshold: Fragmentation threshold (dot11FragmentationThreshold); + * -1 = fragmentation disabled, only odd values >= 256 used + * @rts_threshold: RTS threshold (dot11RTSThreshold); -1 = RTS/CTS disabled + */ +struct wiphy { + /* assign these fields before you register the wiphy */ + + /* permanent MAC address */ + u8 perm_addr[ETH_ALEN]; + + /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ + u16 interface_modes; + + bool custom_regulatory; + bool strict_regulatory; + + enum cfg80211_signal_type signal_type; + + int bss_priv_size; + u8 max_scan_ssids; + u16 max_scan_ie_len; + + int n_cipher_suites; + const u32 *cipher_suites; + + u8 retry_short; + u8 retry_long; + u32 frag_threshold; + u32 rts_threshold; + + /* If multiple wiphys are registered and you're handed e.g. + * a regular netdev with assigned ieee80211_ptr, you won't + * know whether it points to a wiphy your driver has registered + * or not. Assign this to something global to your driver to + * help determine whether you own this wiphy or not. */ + const void *privid; + + struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; + + /* Lets us get back the wiphy on the callback */ + int (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); + + /* fields below are read-only, assigned by cfg80211 */ + + const struct ieee80211_regdomain *regd; + + /* the item in /sys/class/ieee80211/ points to this, + * you need use set_wiphy_dev() (see below) */ + struct device dev; + + /* dir in debugfs: ieee80211/<wiphyname> */ + struct dentry *debugfsdir; + + char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); +}; + +/** + * wiphy_priv - return priv from wiphy + * + * @wiphy: the wiphy whose priv pointer to return + */ +static inline void *wiphy_priv(struct wiphy *wiphy) +{ + BUG_ON(!wiphy); + return &wiphy->priv; +} + +/** + * set_wiphy_dev - set device pointer for wiphy + * + * @wiphy: The wiphy whose device to bind + * @dev: The device to parent it to + */ +static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) +{ + wiphy->dev.parent = dev; +} + +/** + * wiphy_dev - get wiphy dev pointer + * + * @wiphy: The wiphy whose device struct to look up + */ +static inline struct device *wiphy_dev(struct wiphy *wiphy) +{ + return wiphy->dev.parent; +} + +/** + * wiphy_name - get wiphy name + * + * @wiphy: The wiphy whose name to return + */ +static inline const char *wiphy_name(struct wiphy *wiphy) +{ + return dev_name(&wiphy->dev); +} + +/** + * wiphy_new - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * The returned pointer must be assigned to each netdev's + * ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); + +/** + * wiphy_register - register a wiphy with cfg80211 + * + * @wiphy: The wiphy to register. + * + * Returns a non-negative wiphy index or a negative error code. + */ +extern int wiphy_register(struct wiphy *wiphy); + +/** + * wiphy_unregister - deregister a wiphy from cfg80211 + * + * @wiphy: The wiphy to unregister. + * + * After this call, no more requests can be made with this priv + * pointer, but the call may sleep to wait for an outstanding + * request that is being handled. + */ +extern void wiphy_unregister(struct wiphy *wiphy); + +/** + * wiphy_free - free wiphy + * + * @wiphy: The wiphy to free + */ +extern void wiphy_free(struct wiphy *wiphy); + +/** + * struct wireless_dev - wireless per-netdev state + * + * This structure must be allocated by the driver/stack + * that uses the ieee80211_ptr field in struct net_device + * (this is intentional so it can be allocated along with + * the netdev.) + * + * @wiphy: pointer to hardware description + * @iftype: interface type + * @list: (private) Used to collect the interfaces + * @netdev: (private) Used to reference back to the netdev + * @current_bss: (private) Used by the internal configuration code + * @bssid: (private) Used by the internal configuration code + * @ssid: (private) Used by the internal configuration code + * @ssid_len: (private) Used by the internal configuration code + * @wext: (private) Used by the internal wireless extensions compat code + * @wext_bssid: (private) Used by the internal wireless extensions compat code + */ +struct wireless_dev { + struct wiphy *wiphy; + enum nl80211_iftype iftype; + + /* private to the generic wireless code */ + struct list_head list; + struct net_device *netdev; + + /* currently used for IBSS - might be rearranged in the future */ + struct cfg80211_bss *current_bss; + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 ssid_len; + +#ifdef CONFIG_WIRELESS_EXT + /* wext data */ + struct { + struct cfg80211_ibss_params ibss; + u8 bssid[ETH_ALEN]; + s8 default_key, default_mgmt_key; + } wext; +#endif +}; + +/** + * wdev_priv - return wiphy priv from wireless_dev + * + * @wdev: The wireless device whose wiphy's priv pointer to return + */ +static inline void *wdev_priv(struct wireless_dev *wdev) +{ + BUG_ON(!wdev); + return wiphy_priv(wdev->wiphy); +} + +/* + * Utility functions + */ + +/** + * ieee80211_channel_to_frequency - convert channel number to frequency + */ +extern int ieee80211_channel_to_frequency(int chan); + +/** + * ieee80211_frequency_to_channel - convert frequency to channel number + */ +extern int ieee80211_frequency_to_channel(int freq); + +/* + * Name indirection necessary because the ieee80211 code also has + * a function named "ieee80211_get_channel", so if you include + * cfg80211's header file you get cfg80211's version, if you try + * to include both header files you'll (rightfully!) get a symbol + * clash. + */ +extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, + int freq); +/** + * ieee80211_get_channel - get channel struct from wiphy for specified frequency + */ +static inline struct ieee80211_channel * +ieee80211_get_channel(struct wiphy *wiphy, int freq) +{ + return __ieee80211_get_channel(wiphy, freq); +} + +/** + * ieee80211_get_response_rate - get basic rate for a given rate + * + * @sband: the band to look for rates in + * @basic_rates: bitmap of basic rates + * @bitrate: the bitrate for which to find the basic rate + * + * This function returns the basic rate corresponding to a given + * bitrate, that is the next lower bitrate contained in the basic + * rate map, which is, for this function, given as a bitmap of + * indices of rates in the band's bitrate table. + */ +struct ieee80211_rate * +ieee80211_get_response_rate(struct ieee80211_supported_band *sband, + u32 basic_rates, int bitrate); + +/* + * Radiotap parsing functions -- for controlled injection support + * + * Implemented in net/wireless/radiotap.c + * Documentation in Documentation/networking/radiotap-headers.txt + */ + +/** + * struct ieee80211_radiotap_iterator - tracks walk thru present radiotap args + * @rtheader: pointer to the radiotap header we are walking through + * @max_length: length of radiotap header in cpu byte ordering + * @this_arg_index: IEEE80211_RADIOTAP_... index of current arg + * @this_arg: pointer to current radiotap arg + * @arg_index: internal next argument index + * @arg: internal next argument pointer + * @next_bitmap: internal pointer to next present u32 + * @bitmap_shifter: internal shifter for curr u32 bitmap, b0 set == arg present + */ + +struct ieee80211_radiotap_iterator { + struct ieee80211_radiotap_header *rtheader; + int max_length; + int this_arg_index; + u8 *this_arg; + + int arg_index; + u8 *arg; + __le32 *next_bitmap; + u32 bitmap_shifter; +}; + +extern int ieee80211_radiotap_iterator_init( + struct ieee80211_radiotap_iterator *iterator, + struct ieee80211_radiotap_header *radiotap_header, + int max_length); + +extern int ieee80211_radiotap_iterator_next( + struct ieee80211_radiotap_iterator *iterator); + +extern const unsigned char rfc1042_header[6]; +extern const unsigned char bridge_tunnel_header[6]; + +/** + * ieee80211_get_hdrlen_from_skb - get header length from data + * + * Given an skb with a raw 802.11 header at the data pointer this function + * returns the 802.11 header length in bytes (not including encryption + * headers). If the data in the sk_buff is too short to contain a valid 802.11 + * header the function returns 0. + * + * @skb: the frame + */ +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); + +/** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int ieee80211_hdrlen(__le16 fc); + +/** + * ieee80211_data_to_8023 - convert an 802.11 data frame to 802.3 + * @skb: the 802.11 data frame + * @addr: the device MAC address + * @iftype: the virtual interface type + */ +int ieee80211_data_to_8023(struct sk_buff *skb, u8 *addr, + enum nl80211_iftype iftype); + +/** + * ieee80211_data_from_8023 - convert an 802.3 frame to 802.11 + * @skb: the 802.3 frame + * @addr: the device MAC address + * @iftype: the virtual interface type + * @bssid: the network bssid (used only for iftype STATION and ADHOC) + * @qos: build 802.11 QoS data frame + */ +int ieee80211_data_from_8023(struct sk_buff *skb, u8 *addr, + enum nl80211_iftype iftype, u8 *bssid, bool qos); + +/** + * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame + * @skb: the data frame + */ +unsigned int cfg80211_classify8021d(struct sk_buff *skb); + +/* + * Regulatory helper functions for wiphys + */ + +/** + * regulatory_hint - driver hint to the wireless core a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain + * should be in. If @rd is set this should be NULL. Note that if you + * set this to NULL you should still set rd->alpha2 to some accepted + * alpha2. + * + * Wireless drivers can use this function to hint to the wireless core + * what it believes should be the current regulatory domain by + * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory + * domain should be in or by providing a completely build regulatory domain. + * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried + * for a regulatory domain structure for the respective country. + * + * The wiphy must have been registered to cfg80211 prior to this call. + * For cfg80211 drivers this means you must first use wiphy_register(), + * for mac80211 drivers you must first use ieee80211_register_hw(). + * + * Drivers should check the return value, its possible you can get + * an -ENOMEM. + */ +extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); + +/** + * regulatory_hint_11d - hints a country IE as a regulatory domain + * @wiphy: the wireless device giving the hint (used only for reporting + * conflicts) + * @country_ie: pointer to the country IE + * @country_ie_len: length of the country IE + * + * We will intersect the rd with the what CRDA tells us should apply + * for the alpha2 this country IE belongs to, this prevents APs from + * sending us incorrect or outdated information against a country. + */ +extern void regulatory_hint_11d(struct wiphy *wiphy, + u8 *country_ie, + u8 country_ie_len); +/** + * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain + * @wiphy: the wireless device we want to process the regulatory domain on + * @regd: the custom regulatory domain to use for this wiphy + * + * Drivers can sometimes have custom regulatory domains which do not apply + * to a specific country. Drivers can use this to apply such custom regulatory + * domains. This routine must be called prior to wiphy registration. The + * custom regulatory domain will be trusted completely and as such previous + * default channel settings will be disregarded. If no rule is found for a + * channel on the regulatory domain the channel will be disabled. + */ +extern void wiphy_apply_custom_regulatory( + struct wiphy *wiphy, + const struct ieee80211_regdomain *regd); + +/** + * freq_reg_info - get regulatory information for the given frequency + * @wiphy: the wiphy for which we want to process this rule for + * @center_freq: Frequency in KHz for which we want regulatory information for + * @desired_bw_khz: the desired max bandwidth you want to use per + * channel. Note that this is still 20 MHz if you want to use HT40 + * as HT40 makes use of two channels for its 40 MHz width bandwidth. + * If set to 0 we'll assume you want the standard 20 MHz. + * @reg_rule: the regulatory rule which we have for this frequency + * + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. + */ +extern int freq_reg_info(struct wiphy *wiphy, + u32 center_freq, + u32 desired_bw_khz, + const struct ieee80211_reg_rule **reg_rule); + +/* + * Temporary wext handlers & helper functions + * + * In the future cfg80211 will simply assign the entire wext handler + * structure to netdevs it manages, but we're not there yet. + */ int cfg80211_wext_giwname(struct net_device *dev, struct iw_request_info *info, char *name, char *extra); @@ -834,9 +1422,72 @@ int cfg80211_wext_siwscan(struct net_device *dev, int cfg80211_wext_giwscan(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *extra); +int cfg80211_wext_siwmlme(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); int cfg80211_wext_giwrange(struct net_device *dev, struct iw_request_info *info, struct iw_point *data, char *extra); +int cfg80211_ibss_wext_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_ibss_wext_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_ibss_wext_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_ibss_wext_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_ibss_wext_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); +int cfg80211_ibss_wext_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); + +struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy, + struct iw_freq *freq); + +int cfg80211_wext_siwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_giwrts(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rts, char *extra); +int cfg80211_wext_siwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_giwfrag(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *frag, char *extra); +int cfg80211_wext_siwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_giwretry(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *retry, char *extra); +int cfg80211_wext_siwencodeext(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *extra); +int cfg80211_wext_siwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_giwencode(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *erq, char *keybuf); +int cfg80211_wext_siwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); +int cfg80211_wext_giwtxpower(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *data, char *keybuf); + +/* + * callbacks for asynchronous cfg80211 methods, notification + * functions and BSS handling helpers + */ /** * cfg80211_scan_done - notify that scan finished @@ -864,6 +1515,14 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct ieee80211_mgmt *mgmt, size_t len, s32 signal, gfp_t gfp); +struct cfg80211_bss* +cfg80211_inform_bss(struct wiphy *wiphy, + struct ieee80211_channel *channel, + const u8 *bssid, + u64 timestamp, u16 capability, u16 beacon_interval, + const u8 *ie, size_t ielen, + s32 signal, gfp_t gfp); + struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *bssid, @@ -883,6 +1542,7 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, const u8 *meshid, size_t meshidlen, const u8 *meshcfg); void cfg80211_put_bss(struct cfg80211_bss *bss); + /** * cfg80211_unlink_bss - unlink BSS from internal data structures * @wiphy: the wiphy @@ -902,44 +1562,62 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); * @len: length of the frame data * * This function is called whenever an authentication has been processed in - * station mode. + * station mode. The driver is required to call either this function or + * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() + * call. */ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); /** + * cfg80211_send_auth_timeout - notification of timed out authentication + * @dev: network device + * @addr: The MAC address of the device with which the authentication timed out + */ +void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); + +/** * cfg80211_send_rx_assoc - notification of processed association * @dev: network device * @buf: (re)association response frame (header + body) * @len: length of the frame data * * This function is called whenever a (re)association response has been - * processed in station mode. + * processed in station mode. The driver is required to call either this + * function or cfg80211_send_assoc_timeout() to indicate the result of + * cfg80211_ops::assoc() call. */ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_rx_deauth - notification of processed deauthentication + * cfg80211_send_assoc_timeout - notification of timed out association + * @dev: network device + * @addr: The MAC address of the device with which the association timed out + */ +void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); + +/** + * cfg80211_send_deauth - notification of processed deauthentication * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data * * This function is called whenever deauthentication has been processed in - * station mode. + * station mode. This includes both received deauthentication frames and + * locally generated ones. */ -void cfg80211_send_rx_deauth(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_rx_disassoc - notification of processed disassociation + * cfg80211_send_disassoc - notification of processed disassociation * @dev: network device * @buf: disassociation response frame (header + body) * @len: length of the frame data * * This function is called whenever disassociation has been processed in - * station mode. + * station mode. This includes both received disassociation frames and locally + * generated ones. */ -void cfg80211_send_rx_disassoc(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); /** * cfg80211_hold_bss - exclude bss from expiration @@ -958,4 +1636,55 @@ void cfg80211_hold_bss(struct cfg80211_bss *bss); */ void cfg80211_unhold_bss(struct cfg80211_bss *bss); +/** + * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) + * @dev: network device + * @addr: The source MAC address of the frame + * @key_type: The key type that the received frame used + * @key_id: Key identifier (0..3) + * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) + * + * This function is called whenever the local MAC detects a MIC failure in a + * received frame. This matches with MLME-MICHAELMICFAILURE.indication() + * primitive. + */ +void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, + enum nl80211_key_type key_type, int key_id, + const u8 *tsc); + +/** + * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS + * + * @dev: network device + * @bssid: the BSSID of the IBSS joined + * @gfp: allocation flags + * + * This function notifies cfg80211 that the device joined an IBSS or + * switched to a different BSSID. Before this function can be called, + * either a beacon has to have been received from the IBSS, or one of + * the cfg80211_inform_bss{,_frame} functions must have been called + * with the locally generated beacon -- this guarantees that there is + * always a scan result for this IBSS. cfg80211 will handle the rest. + */ +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp); + +/** + * wiphy_rfkill_set_hw_state - notify cfg80211 about hw block state + * @wiphy: the wiphy + * @blocked: block status + */ +void wiphy_rfkill_set_hw_state(struct wiphy *wiphy, bool blocked); + +/** + * wiphy_rfkill_start_polling - start polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_start_polling(struct wiphy *wiphy); + +/** + * wiphy_rfkill_stop_polling - stop polling rfkill + * @wiphy: the wiphy + */ +void wiphy_rfkill_stop_polling(struct wiphy *wiphy); + #endif /* __NET_CFG80211_H */ diff --git a/include/net/dst.h b/include/net/dst.h index 6be3b082a070..7fc409c19b37 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -195,6 +195,12 @@ struct dst_entry * dst_clone(struct dst_entry * dst) } extern void dst_release(struct dst_entry *dst); +static inline void skb_dst_drop(struct sk_buff *skb) +{ + if (skb->_skb_dst) + dst_release(skb_dst(skb)); + skb->_skb_dst = 0UL; +} /* Children define the path of the packet through the * Linux networking. Thus, destinations are stackable. @@ -246,7 +252,7 @@ static inline void dst_negative_advice(struct dst_entry **dst_p) static inline void dst_link_failure(struct sk_buff *skb) { - struct dst_entry * dst = skb->dst; + struct dst_entry *dst = skb_dst(skb); if (dst && dst->ops && dst->ops->link_failure) dst->ops->link_failure(skb); } @@ -265,13 +271,13 @@ static inline void dst_set_expires(struct dst_entry *dst, int timeout) /* Output packet to network from transport. */ static inline int dst_output(struct sk_buff *skb) { - return skb->dst->output(skb); + return skb_dst(skb)->output(skb); } /* Input packet from network to transport. */ static inline int dst_input(struct sk_buff *skb) { - return skb->dst->input(skb); + return skb_dst(skb)->input(skb); } static inline struct dst_entry *dst_check(struct dst_entry *dst, u32 cookie) diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h index c2bb5cae6515..ca4b2e840078 100644 --- a/include/net/fib_rules.h +++ b/include/net/fib_rules.h @@ -48,14 +48,12 @@ struct fib_rules_ops struct flowi *, int); int (*configure)(struct fib_rule *, struct sk_buff *, - struct nlmsghdr *, struct fib_rule_hdr *, struct nlattr **); int (*compare)(struct fib_rule *, struct fib_rule_hdr *, struct nlattr **); int (*fill)(struct fib_rule *, struct sk_buff *, - struct nlmsghdr *, struct fib_rule_hdr *); u32 (*default_pref)(struct fib_rules_ops *ops); size_t (*nlmsg_payload)(struct fib_rule *); diff --git a/include/net/genetlink.h b/include/net/genetlink.h index 747c255d1df0..1b0e3ee4ddd8 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -88,6 +88,8 @@ struct genl_ops }; extern int genl_register_family(struct genl_family *family); +extern int genl_register_family_with_ops(struct genl_family *family, + struct genl_ops *ops, size_t n_ops); extern int genl_unregister_family(struct genl_family *family); extern int genl_register_ops(struct genl_family *, struct genl_ops *ops); extern int genl_unregister_ops(struct genl_family *, struct genl_ops *ops); diff --git a/include/net/ieee802154/af_ieee802154.h b/include/net/ieee802154/af_ieee802154.h new file mode 100644 index 000000000000..0d78605fb1a6 --- /dev/null +++ b/include/net/ieee802154/af_ieee802154.h @@ -0,0 +1,60 @@ +/* + * IEEE 802.15.4 inteface for userspace + * + * Copyright 2007, 2008 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Sergey Lapin <slapin@ossfans.org> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef _AF_IEEE802154_H +#define _AF_IEEE802154_H + +#include <linux/socket.h> /* for sa_family_t */ + +enum { + IEEE802154_ADDR_NONE = 0x0, + /* RESERVED = 0x01, */ + IEEE802154_ADDR_SHORT = 0x2, /* 16-bit address + PANid */ + IEEE802154_ADDR_LONG = 0x3, /* 64-bit address + PANid */ +}; + +/* address length, octets */ +#define IEEE802154_ADDR_LEN 8 + +struct ieee802154_addr { + int addr_type; + u16 pan_id; + union { + u8 hwaddr[IEEE802154_ADDR_LEN]; + u16 short_addr; + }; +}; + +#define IEEE802154_PANID_BROADCAST 0xffff +#define IEEE802154_ADDR_BROADCAST 0xffff +#define IEEE802154_ADDR_UNDEF 0xfffe + +struct sockaddr_ieee802154 { + sa_family_t family; /* AF_IEEE802154 */ + struct ieee802154_addr addr; +}; + +/* master device */ +#define IEEE802154_SIOC_ADD_SLAVE (SIOCDEVPRIVATE + 0) + +#endif diff --git a/include/net/ieee802154/mac_def.h b/include/net/ieee802154/mac_def.h new file mode 100644 index 000000000000..8cb684635650 --- /dev/null +++ b/include/net/ieee802154/mac_def.h @@ -0,0 +1,160 @@ +/* + * IEEE802.15.4-2003 specification + * + * Copyright (C) 2007, 2008 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Pavel Smolenskiy <pavel.smolenskiy@gmail.com> + * Maxim Gorbachyov <maxim.gorbachev@siemens.com> + * Maxim Osipov <maxim.osipov@siemens.com> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef IEEE802154_MAC_DEF_H +#define IEEE802154_MAC_DEF_H + +#define IEEE802154_FC_TYPE_BEACON 0x0 /* Frame is beacon */ +#define IEEE802154_FC_TYPE_DATA 0x1 /* Frame is data */ +#define IEEE802154_FC_TYPE_ACK 0x2 /* Frame is acknowledgment */ +#define IEEE802154_FC_TYPE_MAC_CMD 0x3 /* Frame is MAC command */ + +#define IEEE802154_FC_TYPE_SHIFT 0 +#define IEEE802154_FC_TYPE_MASK ((1 << 3) - 1) +#define IEEE802154_FC_TYPE(x) ((x & IEEE802154_FC_TYPE_MASK) >> IEEE802154_FC_TYPE_SHIFT) +#define IEEE802154_FC_SET_TYPE(v, x) do { \ + v = (((v) & ~IEEE802154_FC_TYPE_MASK) | \ + (((x) << IEEE802154_FC_TYPE_SHIFT) & IEEE802154_FC_TYPE_MASK)); \ + } while (0) + +#define IEEE802154_FC_SECEN (1 << 3) +#define IEEE802154_FC_FRPEND (1 << 4) +#define IEEE802154_FC_ACK_REQ (1 << 5) +#define IEEE802154_FC_INTRA_PAN (1 << 6) + +#define IEEE802154_FC_SAMODE_SHIFT 14 +#define IEEE802154_FC_SAMODE_MASK (3 << IEEE802154_FC_SAMODE_SHIFT) +#define IEEE802154_FC_DAMODE_SHIFT 10 +#define IEEE802154_FC_DAMODE_MASK (3 << IEEE802154_FC_DAMODE_SHIFT) + +#define IEEE802154_FC_SAMODE(x) \ + (((x) & IEEE802154_FC_SAMODE_MASK) >> IEEE802154_FC_SAMODE_SHIFT) + +#define IEEE802154_FC_DAMODE(x) \ + (((x) & IEEE802154_FC_DAMODE_MASK) >> IEEE802154_FC_DAMODE_SHIFT) + + +/* MAC's Command Frames Identifiers */ +#define IEEE802154_CMD_ASSOCIATION_REQ 0x01 +#define IEEE802154_CMD_ASSOCIATION_RESP 0x02 +#define IEEE802154_CMD_DISASSOCIATION_NOTIFY 0x03 +#define IEEE802154_CMD_DATA_REQ 0x04 +#define IEEE802154_CMD_PANID_CONFLICT_NOTIFY 0x05 +#define IEEE802154_CMD_ORPHAN_NOTIFY 0x06 +#define IEEE802154_CMD_BEACON_REQ 0x07 +#define IEEE802154_CMD_COORD_REALIGN_NOTIFY 0x08 +#define IEEE802154_CMD_GTS_REQ 0x09 + +/* + * The return values of MAC operations + */ +enum { + /* + * The requested operation was completed successfully. + * For a transmission request, this value indicates + * a successful transmission. + */ + IEEE802154_SUCCESS = 0x0, + + /* The beacon was lost following a synchronization request. */ + IEEE802154_BEACON_LOSS = 0xe0, + /* + * A transmission could not take place due to activity on the + * channel, i.e., the CSMA-CA mechanism has failed. + */ + IEEE802154_CHNL_ACCESS_FAIL = 0xe1, + /* The GTS request has been denied by the PAN coordinator. */ + IEEE802154_DENINED = 0xe2, + /* The attempt to disable the transceiver has failed. */ + IEEE802154_DISABLE_TRX_FAIL = 0xe3, + /* + * The received frame induces a failed security check according to + * the security suite. + */ + IEEE802154_FAILED_SECURITY_CHECK = 0xe4, + /* + * The frame resulting from secure processing has a length that is + * greater than aMACMaxFrameSize. + */ + IEEE802154_FRAME_TOO_LONG = 0xe5, + /* + * The requested GTS transmission failed because the specified GTS + * either did not have a transmit GTS direction or was not defined. + */ + IEEE802154_INVALID_GTS = 0xe6, + /* + * A request to purge an MSDU from the transaction queue was made using + * an MSDU handle that was not found in the transaction table. + */ + IEEE802154_INVALID_HANDLE = 0xe7, + /* A parameter in the primitive is out of the valid range.*/ + IEEE802154_INVALID_PARAMETER = 0xe8, + /* No acknowledgment was received after aMaxFrameRetries. */ + IEEE802154_NO_ACK = 0xe9, + /* A scan operation failed to find any network beacons.*/ + IEEE802154_NO_BEACON = 0xea, + /* No response data were available following a request. */ + IEEE802154_NO_DATA = 0xeb, + /* The operation failed because a short address was not allocated. */ + IEEE802154_NO_SHORT_ADDRESS = 0xec, + /* + * A receiver enable request was unsuccessful because it could not be + * completed within the CAP. + */ + IEEE802154_OUT_OF_CAP = 0xed, + /* + * A PAN identifier conflict has been detected and communicated to the + * PAN coordinator. + */ + IEEE802154_PANID_CONFLICT = 0xee, + /* A coordinator realignment command has been received. */ + IEEE802154_REALIGMENT = 0xef, + /* The transaction has expired and its information discarded. */ + IEEE802154_TRANSACTION_EXPIRED = 0xf0, + /* There is no capacity to store the transaction. */ + IEEE802154_TRANSACTION_OVERFLOW = 0xf1, + /* + * The transceiver was in the transmitter enabled state when the + * receiver was requested to be enabled. + */ + IEEE802154_TX_ACTIVE = 0xf2, + /* The appropriate key is not available in the ACL. */ + IEEE802154_UNAVAILABLE_KEY = 0xf3, + /* + * A SET/GET request was issued with the identifier of a PIB attribute + * that is not supported. + */ + IEEE802154_UNSUPPORTED_ATTR = 0xf4, + /* + * A request to perform a scan operation failed because the MLME was + * in the process of performing a previously initiated scan operation. + */ + IEEE802154_SCAN_IN_PROGRESS = 0xfc, +}; + + +#endif + + diff --git a/include/net/ieee802154/netdevice.h b/include/net/ieee802154/netdevice.h new file mode 100644 index 000000000000..e2506af3e7c8 --- /dev/null +++ b/include/net/ieee802154/netdevice.h @@ -0,0 +1,115 @@ +/* + * An interface between IEEE802.15.4 device and rest of the kernel. + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Written by: + * Pavel Smolenskiy <pavel.smolenskiy@gmail.com> + * Maxim Gorbachyov <maxim.gorbachev@siemens.com> + * Maxim Osipov <maxim.osipov@siemens.com> + * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> + */ + +#ifndef IEEE802154_NETDEVICE_H +#define IEEE802154_NETDEVICE_H + +/* + * A control block of skb passed between the ARPHRD_IEEE802154 device + * and other stack parts. + */ +struct ieee802154_mac_cb { + u8 lqi; + struct ieee802154_addr sa; + struct ieee802154_addr da; + u8 flags; + u8 seq; +}; + +static inline struct ieee802154_mac_cb *mac_cb(struct sk_buff *skb) +{ + return (struct ieee802154_mac_cb *)skb->cb; +} + +#define MAC_CB_FLAG_TYPEMASK ((1 << 3) - 1) + +#define MAC_CB_FLAG_ACKREQ (1 << 3) +#define MAC_CB_FLAG_SECEN (1 << 4) +#define MAC_CB_FLAG_INTRAPAN (1 << 5) + +static inline int mac_cb_is_ackreq(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_ACKREQ; +} + +static inline int mac_cb_is_secen(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_SECEN; +} + +static inline int mac_cb_is_intrapan(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_INTRAPAN; +} + +static inline int mac_cb_type(struct sk_buff *skb) +{ + return mac_cb(skb)->flags & MAC_CB_FLAG_TYPEMASK; +} + +#define IEEE802154_MAC_SCAN_ED 0 +#define IEEE802154_MAC_SCAN_ACTIVE 1 +#define IEEE802154_MAC_SCAN_PASSIVE 2 +#define IEEE802154_MAC_SCAN_ORPHAN 3 + +/* + * This should be located at net_device->ml_priv + */ +struct ieee802154_mlme_ops { + int (*assoc_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 channel, u8 cap); + int (*assoc_resp)(struct net_device *dev, + struct ieee802154_addr *addr, + u16 short_addr, u8 status); + int (*disassoc_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 reason); + int (*start_req)(struct net_device *dev, + struct ieee802154_addr *addr, + u8 channel, u8 bcn_ord, u8 sf_ord, + u8 pan_coord, u8 blx, u8 coord_realign); + int (*scan_req)(struct net_device *dev, + u8 type, u32 channels, u8 duration); + + /* + * FIXME: these should become the part of PIB/MIB interface. + * However we still don't have IB interface of any kind + */ + u16 (*get_pan_id)(struct net_device *dev); + u16 (*get_short_addr)(struct net_device *dev); + u8 (*get_dsn)(struct net_device *dev); + u8 (*get_bsn)(struct net_device *dev); +}; + +static inline struct ieee802154_mlme_ops *ieee802154_mlme_ops( + struct net_device *dev) +{ + return dev->ml_priv; +} + +#endif + + diff --git a/include/net/ieee802154/nl802154.h b/include/net/ieee802154/nl802154.h new file mode 100644 index 000000000000..78efcdf52b59 --- /dev/null +++ b/include/net/ieee802154/nl802154.h @@ -0,0 +1,41 @@ +/* + * nl802154.h + * + * Copyright (C) 2007, 2008, 2009 Siemens AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef IEEE802154_NL_H +#define IEEE802154_NL_H + +struct net_device; +struct ieee802154_addr; + +int ieee802154_nl_assoc_indic(struct net_device *dev, + struct ieee802154_addr *addr, u8 cap); +int ieee802154_nl_assoc_confirm(struct net_device *dev, + u16 short_addr, u8 status); +int ieee802154_nl_disassoc_indic(struct net_device *dev, + struct ieee802154_addr *addr, u8 reason); +int ieee802154_nl_disassoc_confirm(struct net_device *dev, + u8 status); +int ieee802154_nl_scan_confirm(struct net_device *dev, + u8 status, u8 scan_type, u32 unscanned, + u8 *edl/*, struct list_head *pan_desc_list */); +int ieee802154_nl_beacon_indic(struct net_device *dev, u16 panid, + u16 coord_addr); + +#endif diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h index f74665d7bea8..22c73a77cd99 100644 --- a/include/net/inet6_hashtables.h +++ b/include/net/inet6_hashtables.h @@ -100,7 +100,7 @@ static inline struct sock *__inet6_lookup_skb(struct inet_hashinfo *hashinfo, if (unlikely(sk = skb_steal_sock(skb))) return sk; - else return __inet6_lookup(dev_net(skb->dst->dev), hashinfo, + else return __inet6_lookup(dev_net(skb_dst(skb)->dev), hashinfo, &ipv6_hdr(skb)->saddr, sport, &ipv6_hdr(skb)->daddr, ntohs(dport), inet6_iif(skb)); diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index a44e2248b2ef..d522dcf3031a 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -385,7 +385,7 @@ static inline struct sock *__inet_lookup_skb(struct inet_hashinfo *hashinfo, if (unlikely(sk = skb_steal_sock(skb))) return sk; else - return __inet_lookup(dev_net(skb->dst->dev), hashinfo, + return __inet_lookup(dev_net(skb_dst(skb)->dev), hashinfo, iph->saddr, sport, iph->daddr, dport, inet_iif(skb)); } diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index de0ecc71cf03..20a6957af870 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -130,7 +130,8 @@ struct inet_sock { freebind:1, hdrincl:1, mc_loop:1, - transparent:1; + transparent:1, + mc_all:1; int mc_index; __be32 mc_addr; struct ip_mc_socklist *mc_list; diff --git a/include/net/ip.h b/include/net/ip.h index 4ac7577f98d0..72c36926c26d 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -168,7 +168,10 @@ struct ipv4_config extern struct ipv4_config ipv4_config; #define IP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.ip_statistics, field) #define IP_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.ip_statistics, field) +#define IP_ADD_STATS(net, field, val) SNMP_ADD_STATS((net)->mib.ip_statistics, field, val) #define IP_ADD_STATS_BH(net, field, val) SNMP_ADD_STATS_BH((net)->mib.ip_statistics, field, val) +#define IP_UPD_PO_STATS(net, field, val) SNMP_UPD_PO_STATS((net)->mib.ip_statistics, field, val) +#define IP_UPD_PO_STATS_BH(net, field, val) SNMP_UPD_PO_STATS_BH((net)->mib.ip_statistics, field, val) #define NET_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.net_statistics, field) #define NET_INC_STATS_BH(net, field) SNMP_INC_STATS_BH((net)->mib.net_statistics, field) #define NET_INC_STATS_USER(net, field) SNMP_INC_STATS_USER((net)->mib.net_statistics, field) diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h index 5f53db7e4e57..0e1b8aebaff8 100644 --- a/include/net/ip6_route.h +++ b/include/net/ip6_route.h @@ -142,7 +142,7 @@ static inline void ip6_dst_store(struct sock *sk, struct dst_entry *dst, static inline int ipv6_unicast_destination(struct sk_buff *skb) { - struct rt6_info *rt = (struct rt6_info *) skb->dst; + struct rt6_info *rt = (struct rt6_info *) skb_dst(skb); return rt->rt6i_flags & RTF_LOCAL; } diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index 8b12667f7a2b..ef91fe924ba4 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -124,14 +124,12 @@ struct fib_result_nl { #ifdef CONFIG_IP_ROUTE_MULTIPATH #define FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel]) -#define FIB_RES_RESET(res) ((res).nh_sel = 0) #define FIB_TABLE_HASHSZ 2 #else /* CONFIG_IP_ROUTE_MULTIPATH */ #define FIB_RES_NH(res) ((res).fi->fib_nh[0]) -#define FIB_RES_RESET(res) #define FIB_TABLE_HASHSZ 256 @@ -145,7 +143,6 @@ struct fib_result_nl { struct fib_table { struct hlist_node tb_hlist; u32 tb_id; - unsigned tb_stamp; int tb_default; int (*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res); int (*tb_insert)(struct fib_table *, struct fib_config *); diff --git a/include/net/ipip.h b/include/net/ipip.h index fdf9bd743705..5d3036fa1511 100644 --- a/include/net/ipip.h +++ b/include/net/ipip.h @@ -28,11 +28,18 @@ struct ip_tunnel unsigned int prl_count; /* # of entries in PRL */ }; +/* ISATAP: default interval between RS in secondy */ +#define IPTUNNEL_RS_DEFAULT_DELAY (900) + struct ip_tunnel_prl_entry { struct ip_tunnel_prl_entry *next; __be32 addr; u16 flags; + unsigned long rs_delay; + struct timer_list rs_timer; + struct ip_tunnel *tunnel; + spinlock_t lock; }; #define IPTUNNEL_XMIT() do { \ diff --git a/include/net/ipv6.h b/include/net/ipv6.h index c1f16fc49ade..f27fd83d67d8 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -126,15 +126,28 @@ extern struct ctl_path net_ipv6_ctl_path[]; SNMP_ADD_STATS##modifier((net)->mib.statname##_statistics, (field), (val));\ }) +#define _DEVUPD(net, statname, modifier, idev, field, val) \ +({ \ + struct inet6_dev *_idev = (idev); \ + if (likely(_idev != NULL)) \ + SNMP_UPD_PO_STATS##modifier((_idev)->stats.statname, field, (val)); \ + SNMP_UPD_PO_STATS##modifier((net)->mib.statname##_statistics, field, (val));\ +}) + /* MIBs */ #define IP6_INC_STATS(net, idev,field) \ _DEVINC(net, ipv6, , idev, field) #define IP6_INC_STATS_BH(net, idev,field) \ _DEVINC(net, ipv6, _BH, idev, field) +#define IP6_ADD_STATS(net, idev,field,val) \ + _DEVADD(net, ipv6, , idev, field, val) #define IP6_ADD_STATS_BH(net, idev,field,val) \ _DEVADD(net, ipv6, _BH, idev, field, val) - +#define IP6_UPD_PO_STATS(net, idev,field,val) \ + _DEVUPD(net, ipv6, , idev, field, val) +#define IP6_UPD_PO_STATS_BH(net, idev,field,val) \ + _DEVUPD(net, ipv6, _BH, idev, field, val) #define ICMP6_INC_STATS(net, idev, field) \ _DEVINC(net, icmpv6, , idev, field) #define ICMP6_INC_STATS_BH(net, idev, field) \ diff --git a/include/net/iucv/af_iucv.h b/include/net/iucv/af_iucv.h index 85f80eadfa35..21ee49ffcbaf 100644 --- a/include/net/iucv/af_iucv.h +++ b/include/net/iucv/af_iucv.h @@ -73,8 +73,17 @@ struct iucv_sock { struct sk_buff_head backlog_skb_q; struct sock_msg_q message_q; unsigned int send_tag; + u8 flags; + u16 msglimit; }; +/* iucv socket options (SOL_IUCV) */ +#define SO_IPRMDATA_MSG 0x0080 /* send/recv IPRM_DATA msgs */ +#define SO_MSGLIMIT 0x1000 /* get/set IUCV MSGLIMIT */ + +/* iucv related control messages (scm) */ +#define SCM_IUCV_TRGCLS 0x0001 /* target class control message */ + struct iucv_sock_list { struct hlist_head head; rwlock_t lock; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3b83a80e3fe0..c06104476973 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -19,7 +19,6 @@ #include <linux/wireless.h> #include <linux/device.h> #include <linux/ieee80211.h> -#include <net/wireless.h> #include <net/cfg80211.h> /** @@ -74,22 +73,6 @@ */ /** - * struct ieee80211_ht_bss_info - describing BSS's HT characteristics - * - * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS. - * - * @primary_channel: channel number of primery channel - * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) - * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection) - */ -struct ieee80211_ht_bss_info { - u8 primary_channel; - u8 bss_cap; /* use IEEE80211_HT_IE_CHA_ */ - u8 bss_op_mode; /* use IEEE80211_HT_IE_ */ -}; - -/** * enum ieee80211_max_queues - maximum number of queues * * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. @@ -150,6 +133,13 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_ERP_SLOT: slot timing changed * @BSS_CHANGED_HT: 802.11n parameters changed * @BSS_CHANGED_BASIC_RATES: Basic rateset changed + * @BSS_CHANGED_BEACON_INT: Beacon interval changed + * @BSS_CHANGED_BSSID: BSSID changed, for whatever + * reason (IBSS and managed mode) + * @BSS_CHANGED_BEACON: Beacon data changed, retrieve + * new beacon (beaconing modes) + * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be + * enabled/disabled (beaconing modes) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -158,14 +148,10 @@ enum ieee80211_bss_change { BSS_CHANGED_ERP_SLOT = 1<<3, BSS_CHANGED_HT = 1<<4, BSS_CHANGED_BASIC_RATES = 1<<5, -}; - -/** - * struct ieee80211_bss_ht_conf - BSS's changing HT configuration - * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info) - */ -struct ieee80211_bss_ht_conf { - u16 operation_mode; + BSS_CHANGED_BEACON_INT = 1<<6, + BSS_CHANGED_BSSID = 1<<7, + BSS_CHANGED_BEACON = 1<<8, + BSS_CHANGED_BEACON_ENABLED = 1<<9, }; /** @@ -187,12 +173,16 @@ struct ieee80211_bss_ht_conf { * @timestamp: beacon timestamp * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp - * @ht: BSS's HT configuration * @basic_rates: bitmap of basic rates, each bit stands for an * index into the rate table configured by the driver in * the current band. + * @bssid: The BSSID for this BSS + * @enable_beacon: whether beaconing should be enabled or not + * @ht_operation_mode: HT operation mode (like in &struct ieee80211_ht_info). + * This field is only valid when the channel type is one of the HT types. */ struct ieee80211_bss_conf { + const u8 *bssid; /* association related data */ bool assoc; u16 aid; @@ -200,12 +190,13 @@ struct ieee80211_bss_conf { bool use_cts_prot; bool use_short_preamble; bool use_short_slot; + bool enable_beacon; u8 dtim_period; u16 beacon_int; u16 assoc_capability; u64 timestamp; u32 basic_rates; - struct ieee80211_bss_ht_conf ht; + u16 ht_operation_mode; }; /** @@ -248,6 +239,8 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. + * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211, + * used to indicate that a frame was already retried due to PS */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -265,6 +258,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), + IEEE80211_TX_INTFL_RETRIED = BIT(15), }; /** @@ -518,52 +512,76 @@ struct ieee80211_rx_status { * Flags to define PHY configuration options * * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) - * @IEEE80211_CONF_PS: Enable 802.11 power save mode + * @IEEE80211_CONF_PS: Enable 802.11 power save mode (managed mode only) + * @IEEE80211_CONF_IDLE: The device is running, but idle; if the flag is set + * the driver should be prepared to handle configuration requests but + * may turn the device off as much as possible. Typically, this flag will + * be set when an interface is set UP but not associated or scanning, but + * it can also be unset in that case when monitor interfaces are active. */ enum ieee80211_conf_flags { IEEE80211_CONF_RADIOTAP = (1<<0), IEEE80211_CONF_PS = (1<<1), + IEEE80211_CONF_IDLE = (1<<2), }; /** * enum ieee80211_conf_changed - denotes which configuration changed * - * @IEEE80211_CONF_CHANGE_RADIO_ENABLED: the value of radio_enabled changed - * @IEEE80211_CONF_CHANGE_BEACON_INTERVAL: the beacon interval changed + * @_IEEE80211_CONF_CHANGE_RADIO_ENABLED: DEPRECATED * @IEEE80211_CONF_CHANGE_LISTEN_INTERVAL: the listen interval changed * @IEEE80211_CONF_CHANGE_RADIOTAP: the radiotap flag changed - * @IEEE80211_CONF_CHANGE_PS: the PS flag changed - * @IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT: the dynamic PS timeout changed + * @IEEE80211_CONF_CHANGE_PS: the PS flag or dynamic PS timeout changed * @IEEE80211_CONF_CHANGE_POWER: the TX power changed * @IEEE80211_CONF_CHANGE_CHANNEL: the channel/channel_type changed * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed + * @IEEE80211_CONF_CHANGE_IDLE: Idle flag changed */ enum ieee80211_conf_changed { - IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), - IEEE80211_CONF_CHANGE_BEACON_INTERVAL = BIT(1), + _IEEE80211_CONF_CHANGE_RADIO_ENABLED = BIT(0), IEEE80211_CONF_CHANGE_LISTEN_INTERVAL = BIT(2), IEEE80211_CONF_CHANGE_RADIOTAP = BIT(3), IEEE80211_CONF_CHANGE_PS = BIT(4), - IEEE80211_CONF_CHANGE_DYNPS_TIMEOUT = BIT(5), - IEEE80211_CONF_CHANGE_POWER = BIT(6), - IEEE80211_CONF_CHANGE_CHANNEL = BIT(7), - IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(8), + IEEE80211_CONF_CHANGE_POWER = BIT(5), + IEEE80211_CONF_CHANGE_CHANNEL = BIT(6), + IEEE80211_CONF_CHANGE_RETRY_LIMITS = BIT(7), + IEEE80211_CONF_CHANGE_IDLE = BIT(8), }; +static inline __deprecated enum ieee80211_conf_changed +__IEEE80211_CONF_CHANGE_RADIO_ENABLED(void) +{ + return _IEEE80211_CONF_CHANGE_RADIO_ENABLED; +} +#define IEEE80211_CONF_CHANGE_RADIO_ENABLED \ + __IEEE80211_CONF_CHANGE_RADIO_ENABLED() + /** * struct ieee80211_conf - configuration of the device * * This struct indicates how the driver shall configure the hardware. * + * @flags: configuration flags defined above + * * @radio_enabled: when zero, driver is required to switch off the radio. - * @beacon_int: beacon interval (TODO make interface config) + * @beacon_int: DEPRECATED, DO NOT USE + * * @listen_interval: listen interval in units of beacon interval - * @flags: configuration flags defined above + * @max_sleep_period: the maximum number of beacon intervals to sleep for + * before checking the beacon for a TIM bit (managed mode only); this + * value will be only achievable between DTIM frames, the hardware + * needs to check for the multicast traffic bit in DTIM beacons. + * This variable is valid only when the CONF_PS flag is set. + * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the + * powersave documentation below. This variable is valid only when + * the CONF_PS flag is set. + * * @power_level: requested transmit power (in dBm) - * @dynamic_ps_timeout: dynamic powersave timeout (in ms) + * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, * but actually means the number of transmissions not the number of retries @@ -572,12 +590,13 @@ enum ieee80211_conf_changed { * number of transmissions not the number of retries */ struct ieee80211_conf { - int beacon_int; + int __deprecated beacon_int; u32 flags; int power_level, dynamic_ps_timeout; + int max_sleep_period; u16 listen_interval; - bool radio_enabled; + bool __deprecated radio_enabled; u8 long_frame_max_tx_count, short_frame_max_tx_count; @@ -640,37 +659,6 @@ struct ieee80211_if_init_conf { }; /** - * enum ieee80211_if_conf_change - interface config change flags - * - * @IEEE80211_IFCC_BSSID: The BSSID changed. - * @IEEE80211_IFCC_BEACON: The beacon for this interface changed - * (currently AP and MESH only), use ieee80211_beacon_get(). - * @IEEE80211_IFCC_BEACON_ENABLED: The enable_beacon value changed. - */ -enum ieee80211_if_conf_change { - IEEE80211_IFCC_BSSID = BIT(0), - IEEE80211_IFCC_BEACON = BIT(1), - IEEE80211_IFCC_BEACON_ENABLED = BIT(2), -}; - -/** - * struct ieee80211_if_conf - configuration of an interface - * - * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. - * @bssid: BSSID of the network we are associated to/creating. - * @enable_beacon: Indicates whether beacons can be sent. - * This is valid only for AP/IBSS/MESH modes. - * - * This structure is passed to the config_interface() callback of - * &struct ieee80211_hw. - */ -struct ieee80211_if_conf { - u32 changed; - const u8 *bssid; - bool enable_beacon; -}; - -/** * enum ieee80211_key_alg - key algorithm * @ALG_WEP: WEP40 or WEP104 * @ALG_TKIP: TKIP @@ -685,16 +673,6 @@ enum ieee80211_key_alg { }; /** - * enum ieee80211_key_len - key length - * @LEN_WEP40: WEP 5-byte long key - * @LEN_WEP104: WEP 13-byte long key - */ -enum ieee80211_key_len { - LEN_WEP40 = 5, - LEN_WEP104 = 13, -}; - -/** * enum ieee80211_key_flags - key flags * * These flags are used for communication about keys between the driver @@ -1109,11 +1087,9 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * need software support for parsing the TIM bitmap. This is also supported * by mac80211 by combining the %IEEE80211_HW_SUPPORTS_PS and * %IEEE80211_HW_PS_NULLFUNC_STACK flags. The hardware is of course still - * required to pass up beacons. Additionally, in this case, mac80211 will - * wake up the hardware when multicast traffic is announced in the beacon. - * - * FIXME: I don't think we can be fast enough in software when we want to - * receive multicast traffic? + * required to pass up beacons. The hardware is still required to handle + * waking up for multicast traffic; if it cannot the driver must handle that + * as best as it can, mac80211 is too slow. * * Dynamic powersave mode is an extension to normal powersave mode in which * the hardware stays awake for a user-specified period of time after sending @@ -1134,11 +1110,53 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is informed with %IEEE80211_HW_BEACON_FILTER flag. - * The driver needs to enable beacon filter support whenever power save is - * enabled, that is %IEEE80211_CONF_PS is set. When power save is enabled, - * the stack will not check for beacon miss at all and the driver needs to - * notify about complete loss of beacons with ieee80211_beacon_loss(). + * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER + * hardware capability. The driver needs to enable beacon filter support + * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When + * power save is enabled, the stack will not check for beacon loss and the + * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). + * + * The time (or number of beacons missed) until the firmware notifies the + * driver of a beacon loss event (which in turn causes the driver to call + * ieee80211_beacon_loss()) should be configurable and will be controlled + * by mac80211 and the roaming algorithm in the future. + * + * Since there may be constantly changing information elements that nothing + * in the software stack cares about, we will, in the future, have mac80211 + * tell the driver which information elements are interesting in the sense + * that we want to see changes in them. This will include + * - a list of information element IDs + * - a list of OUIs for the vendor information element + * + * Ideally, the hardware would filter out any beacons without changes in the + * requested elements, but if it cannot support that it may, at the expense + * of some efficiency, filter out only a subset. For example, if the device + * doesn't support checking for OUIs it should pass up all changes in all + * vendor information elements. + * + * Note that change, for the sake of simplification, also includes information + * elements appearing or disappearing from the beacon. + * + * Some hardware supports an "ignore list" instead, just make sure nothing + * that was requested is on the ignore list, and include commonly changing + * information element IDs in the ignore list, for example 11 (BSS load) and + * the various vendor-assigned IEs with unknown contents (128, 129, 133-136, + * 149, 150, 155, 156, 173, 176, 178, 179, 219); for forward compatibility + * it could also include some currently unused IDs. + * + * + * In addition to these capabilities, hardware should support notifying the + * host of changes in the beacon RSSI. This is relevant to implement roaming + * when no traffic is flowing (when traffic is flowing we see the RSSI of + * the received data packets). This can consist in notifying the host when + * the RSSI changes significantly or when it drops below or rises above + * configurable thresholds. In the future these thresholds will also be + * configured by mac80211 (which gets them from userspace) to implement + * them as the roaming algorithm requires. + * + * If the hardware cannot implement this, the driver should ask it to + * periodically pass beacon frames to the host so that software can do the + * signal strength threshold checking. */ /** @@ -1298,10 +1316,6 @@ enum ieee80211_ampdu_mlme_action { * This function should never fail but returns a negative error code * if it does. * - * @config_interface: Handler for configuration requests related to interfaces - * (e.g. BSSID changes.) - * Returns a negative error code which will be seen in userspace. - * * @bss_info_changed: Handler for configuration requests related to BSS * parameters that may vary during BSS's lifespan, and may affect low * level driver (e.g. assoc/disassoc status, erp parameters). @@ -1330,11 +1344,14 @@ enum ieee80211_ampdu_mlme_action { * the scan state machine in stack. The scan must honour the channel * configuration done by the regulatory agent in the wiphy's * registered bands. The hardware (or the driver) needs to make sure - * that power save is disabled. When the scan finishes, - * ieee80211_scan_completed() must be called; note that it also must - * be called when the scan cannot finish because the hardware is - * turned off! Anything else is a bug! Returns a negative error code - * which will be seen in userspace. + * that power save is disabled. + * The @req ie/ie_len members are rewritten by mac80211 to contain the + * entire IEs after the SSID, so that drivers need not look at these + * at all but just send them after the SSID -- mac80211 includes the + * (extended) supported rates and HT information (where applicable). + * When the scan finishes, ieee80211_scan_completed() must be called; + * note that it also must be called when the scan cannot finish due to + * any error unless this callback returned a negative error code. * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. @@ -1390,6 +1407,10 @@ enum ieee80211_ampdu_mlme_action { * is the first frame we expect to perform the action on. Notice * that TX/RX_STOP can pass NULL for this parameter. * Returns a negative error code on failure. + * + * @rfkill_poll: Poll rfkill hardware state. If you need this, you also + * need to set wiphy->rfkill_poll to %true before registration, + * and need to call wiphy_rfkill_set_hw_state() in the callback. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1400,9 +1421,6 @@ struct ieee80211_ops { void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf); int (*config)(struct ieee80211_hw *hw, u32 changed); - int (*config_interface)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf); void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -1441,6 +1459,8 @@ struct ieee80211_ops { int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, struct ieee80211_sta *sta, u16 tid, u16 *ssn); + + void (*rfkill_poll)(struct ieee80211_hw *hw); }; /** @@ -1572,6 +1592,20 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw); */ void ieee80211_free_hw(struct ieee80211_hw *hw); +/** + * ieee80211_restart_hw - restart hardware completely + * + * Call this function when the hardware was restarted for some reason + * (hardware error, ...) and the driver is unable to restore its state + * by itself. mac80211 assumes that at this point the driver/hardware + * is completely uninitialised and stopped, it starts the process by + * calling the ->start() operation. The driver will need to reset all + * internal state that it has prior to calling this function. + * + * @hw: the hardware to restart + */ +void ieee80211_restart_hw(struct ieee80211_hw *hw); + /* trick to avoid symbol clashes with the ieee80211 subsystem */ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_rx_status *status); @@ -1775,24 +1809,6 @@ struct sk_buff * ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** - * ieee80211_get_hdrlen_from_skb - get header length from data - * - * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. - * - * @skb: the frame - */ -unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); - -/** - * ieee80211_hdrlen - get header length in bytes from frame control - * @fc: frame control field in little-endian format - */ -unsigned int ieee80211_hdrlen(__le16 fc); - -/** * ieee80211_get_tkip_key - get a TKIP rc4 for skb * * This function computes a TKIP rc4 key for an skb. It computes diff --git a/include/net/netfilter/ipv4/nf_conntrack_icmp.h b/include/net/netfilter/ipv4/nf_conntrack_icmp.h deleted file mode 100644 index 3dd22cff23ec..000000000000 --- a/include/net/netfilter/ipv4/nf_conntrack_icmp.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _NF_CONNTRACK_ICMP_H -#define _NF_CONNTRACK_ICMP_H -/* ICMP tracking. */ -#include <asm/atomic.h> - -struct ip_ct_icmp -{ - /* Optimization: when number in == number out, forget immediately. */ - atomic_t count; -}; -#endif /* _NF_CONNTRACK_ICMP_H */ diff --git a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h index 86591afda29c..67edd50a398a 100644 --- a/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h +++ b/include/net/netfilter/ipv6/nf_conntrack_icmpv6.h @@ -9,7 +9,6 @@ #ifndef _NF_CONNTRACK_ICMPV6_H #define _NF_CONNTRACK_ICMPV6_H -#include <asm/atomic.h> #ifndef ICMPV6_NI_QUERY #define ICMPV6_NI_QUERY 139 @@ -18,10 +17,4 @@ #define ICMPV6_NI_REPLY 140 #endif -struct nf_ct_icmpv6 -{ - /* Optimization: when number in == number out, forget immediately. */ - atomic_t count; -}; - #endif /* _NF_CONNTRACK_ICMPV6_H */ diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index 6c3f964de9e1..a632689b61b4 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -23,7 +23,6 @@ #include <linux/netfilter/nf_conntrack_dccp.h> #include <linux/netfilter/nf_conntrack_sctp.h> #include <linux/netfilter/nf_conntrack_proto_gre.h> -#include <net/netfilter/ipv4/nf_conntrack_icmp.h> #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h> #include <net/netfilter/nf_conntrack_tuple.h> @@ -34,8 +33,6 @@ union nf_conntrack_proto { struct nf_ct_dccp dccp; struct ip_ct_sctp sctp; struct ip_ct_tcp tcp; - struct ip_ct_icmp icmp; - struct nf_ct_icmpv6 icmpv6; struct nf_ct_gre gre; }; @@ -96,6 +93,8 @@ struct nf_conn { plus 1 for any connection(s) we are `master' for */ struct nf_conntrack ct_general; + spinlock_t lock; + /* XXX should I move this to the tail ? - Y.K */ /* These are my tuples; original and reply */ struct nf_conntrack_tuple_hash tuplehash[IP_CT_DIR_MAX]; @@ -144,6 +143,8 @@ static inline u_int8_t nf_ct_protonum(const struct nf_conn *ct) return ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum; } +#define nf_ct_tuple(ct, dir) (&(ct)->tuplehash[dir].tuple) + /* get master conntrack via master expectation */ #define master_ct(conntr) (conntr->master) @@ -200,8 +201,10 @@ extern struct nf_conntrack_tuple_hash * __nf_conntrack_find(struct net *net, const struct nf_conntrack_tuple *tuple); extern void nf_conntrack_hash_insert(struct nf_conn *ct); +extern void nf_ct_delete_from_lists(struct nf_conn *ct); +extern void nf_ct_insert_dying_list(struct nf_conn *ct); -extern void nf_conntrack_flush(struct net *net, u32 pid, int report); +extern void nf_conntrack_flush_report(struct net *net, u32 pid, int report); extern bool nf_ct_get_tuplepr(const struct sk_buff *skb, unsigned int nhoff, u_int16_t l3num, diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h index 0ff0dc69ca4a..4f20d58e2ab7 100644 --- a/include/net/netfilter/nf_conntrack_ecache.h +++ b/include/net/netfilter/nf_conntrack_ecache.h @@ -6,17 +6,54 @@ #define _NF_CONNTRACK_ECACHE_H #include <net/netfilter/nf_conntrack.h> -#include <linux/notifier.h> -#include <linux/interrupt.h> #include <net/net_namespace.h> #include <net/netfilter/nf_conntrack_expect.h> +#include <linux/netfilter/nf_conntrack_common.h> +#include <linux/netfilter/nf_conntrack_tuple_common.h> +#include <net/netfilter/nf_conntrack_extend.h> + +/* Connection tracking event types */ +enum ip_conntrack_events +{ + IPCT_NEW = 0, /* new conntrack */ + IPCT_RELATED = 1, /* related conntrack */ + IPCT_DESTROY = 2, /* destroyed conntrack */ + IPCT_STATUS = 3, /* status has changed */ + IPCT_PROTOINFO = 4, /* protocol information has changed */ + IPCT_HELPER = 5, /* new helper has been set */ + IPCT_MARK = 6, /* new mark has been set */ + IPCT_NATSEQADJ = 7, /* NAT is doing sequence adjustment */ + IPCT_SECMARK = 8, /* new security mark has been set */ +}; + +enum ip_conntrack_expect_events { + IPEXP_NEW = 0, /* new expectation */ +}; -#ifdef CONFIG_NF_CONNTRACK_EVENTS struct nf_conntrack_ecache { - struct nf_conn *ct; - unsigned int events; + unsigned long cache; /* bitops want long */ + unsigned long missed; /* missed events */ + u32 pid; /* netlink pid of destroyer */ +}; + +static inline struct nf_conntrack_ecache * +nf_ct_ecache_find(const struct nf_conn *ct) +{ + return nf_ct_ext_find(ct, NF_CT_EXT_ECACHE); +} + +static inline struct nf_conntrack_ecache * +nf_ct_ecache_ext_add(struct nf_conn *ct, gfp_t gfp) +{ + struct net *net = nf_ct_net(ct); + + if (!net->ct.sysctl_events) + return NULL; + + return nf_ct_ext_add(ct, NF_CT_EXT_ECACHE, gfp); }; +#ifdef CONFIG_NF_CONNTRACK_EVENTS /* This structure is passed to event handler */ struct nf_ct_event { struct nf_conn *ct; @@ -24,47 +61,96 @@ struct nf_ct_event { int report; }; -extern struct atomic_notifier_head nf_conntrack_chain; -extern int nf_conntrack_register_notifier(struct notifier_block *nb); -extern int nf_conntrack_unregister_notifier(struct notifier_block *nb); +struct nf_ct_event_notifier { + int (*fcn)(unsigned int events, struct nf_ct_event *item); +}; + +extern struct nf_ct_event_notifier *nf_conntrack_event_cb; +extern int nf_conntrack_register_notifier(struct nf_ct_event_notifier *nb); +extern void nf_conntrack_unregister_notifier(struct nf_ct_event_notifier *nb); -extern void nf_ct_deliver_cached_events(const struct nf_conn *ct); -extern void __nf_ct_event_cache_init(struct nf_conn *ct); -extern void nf_ct_event_cache_flush(struct net *net); +extern void nf_ct_deliver_cached_events(struct nf_conn *ct); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) { + struct nf_conntrack_ecache *e; + + if (nf_conntrack_event_cb == NULL) + return; + + e = nf_ct_ecache_find(ct); + if (e == NULL) + return; + + set_bit(event, &e->cache); +} + +static inline int +nf_conntrack_eventmask_report(unsigned int eventmask, + struct nf_conn *ct, + u32 pid, + int report) +{ + int ret = 0; struct net *net = nf_ct_net(ct); - struct nf_conntrack_ecache *ecache; - - local_bh_disable(); - ecache = per_cpu_ptr(net->ct.ecache, raw_smp_processor_id()); - if (ct != ecache->ct) - __nf_ct_event_cache_init(ct); - ecache->events |= event; - local_bh_enable(); + struct nf_ct_event_notifier *notify; + struct nf_conntrack_ecache *e; + + rcu_read_lock(); + notify = rcu_dereference(nf_conntrack_event_cb); + if (notify == NULL) + goto out_unlock; + + if (!net->ct.sysctl_events) + goto out_unlock; + + e = nf_ct_ecache_find(ct); + if (e == NULL) + goto out_unlock; + + if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) { + struct nf_ct_event item = { + .ct = ct, + .pid = e->pid ? e->pid : pid, + .report = report + }; + /* This is a resent of a destroy event? If so, skip missed */ + unsigned long missed = e->pid ? 0 : e->missed; + + ret = notify->fcn(eventmask | missed, &item); + if (unlikely(ret < 0 || missed)) { + spin_lock_bh(&ct->lock); + if (ret < 0) { + /* This is a destroy event that has been + * triggered by a process, we store the PID + * to include it in the retransmission. */ + if (eventmask & (1 << IPCT_DESTROY) && + e->pid == 0 && pid != 0) + e->pid = pid; + else + e->missed |= eventmask; + } else + e->missed &= ~missed; + spin_unlock_bh(&ct->lock); + } + } +out_unlock: + rcu_read_unlock(); + return ret; } -static inline void -nf_conntrack_event_report(enum ip_conntrack_events event, - struct nf_conn *ct, - u32 pid, - int report) +static inline int +nf_conntrack_event_report(enum ip_conntrack_events event, struct nf_conn *ct, + u32 pid, int report) { - struct nf_ct_event item = { - .ct = ct, - .pid = pid, - .report = report - }; - if (nf_ct_is_confirmed(ct) && !nf_ct_is_dying(ct)) - atomic_notifier_call_chain(&nf_conntrack_chain, event, &item); + return nf_conntrack_eventmask_report(1 << event, ct, pid, report); } -static inline void +static inline int nf_conntrack_event(enum ip_conntrack_events event, struct nf_conn *ct) { - nf_conntrack_event_report(event, ct, 0, 0); + return nf_conntrack_eventmask_report(1 << event, ct, 0, 0); } struct nf_exp_event { @@ -73,9 +159,13 @@ struct nf_exp_event { int report; }; -extern struct atomic_notifier_head nf_ct_expect_chain; -extern int nf_ct_expect_register_notifier(struct notifier_block *nb); -extern int nf_ct_expect_unregister_notifier(struct notifier_block *nb); +struct nf_exp_event_notifier { + int (*fcn)(unsigned int events, struct nf_exp_event *item); +}; + +extern struct nf_exp_event_notifier *nf_expect_event_cb; +extern int nf_ct_expect_register_notifier(struct nf_exp_event_notifier *nb); +extern void nf_ct_expect_unregister_notifier(struct nf_exp_event_notifier *nb); static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events event, @@ -83,12 +173,27 @@ nf_ct_expect_event_report(enum ip_conntrack_expect_events event, u32 pid, int report) { - struct nf_exp_event item = { - .exp = exp, - .pid = pid, - .report = report - }; - atomic_notifier_call_chain(&nf_ct_expect_chain, event, &item); + struct net *net = nf_ct_exp_net(exp); + struct nf_exp_event_notifier *notify; + + rcu_read_lock(); + notify = rcu_dereference(nf_expect_event_cb); + if (notify == NULL) + goto out_unlock; + + if (!net->ct.sysctl_events) + goto out_unlock; + + { + struct nf_exp_event item = { + .exp = exp, + .pid = pid, + .report = report + }; + notify->fcn(1 << event, &item); + } +out_unlock: + rcu_read_unlock(); } static inline void @@ -105,12 +210,16 @@ extern void nf_conntrack_ecache_fini(struct net *net); static inline void nf_conntrack_event_cache(enum ip_conntrack_events event, struct nf_conn *ct) {} -static inline void nf_conntrack_event(enum ip_conntrack_events event, - struct nf_conn *ct) {} -static inline void nf_conntrack_event_report(enum ip_conntrack_events event, - struct nf_conn *ct, - u32 pid, - int report) {} +static inline int nf_conntrack_eventmask_report(unsigned int eventmask, + struct nf_conn *ct, + u32 pid, + int report) { return 0; } +static inline int nf_conntrack_event(enum ip_conntrack_events event, + struct nf_conn *ct) { return 0; } +static inline int nf_conntrack_event_report(enum ip_conntrack_events event, + struct nf_conn *ct, + u32 pid, + int report) { return 0; } static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {} static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event, struct nf_conntrack_expect *exp) {} @@ -118,7 +227,6 @@ static inline void nf_ct_expect_event_report(enum ip_conntrack_expect_events e, struct nf_conntrack_expect *exp, u32 pid, int report) {} -static inline void nf_ct_event_cache_flush(struct net *net) {} static inline int nf_conntrack_ecache_init(struct net *net) { diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index da8ee52613a5..7f8fc5d123c5 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -8,12 +8,14 @@ enum nf_ct_ext_id NF_CT_EXT_HELPER, NF_CT_EXT_NAT, NF_CT_EXT_ACCT, + NF_CT_EXT_ECACHE, NF_CT_EXT_NUM, }; #define NF_CT_EXT_HELPER_TYPE struct nf_conn_help #define NF_CT_EXT_NAT_TYPE struct nf_conn_nat #define NF_CT_EXT_ACCT_TYPE struct nf_conn_counter +#define NF_CT_EXT_ECACHE_TYPE struct nf_conntrack_ecache /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h index ee2a4b369a04..1b7068000927 100644 --- a/include/net/netfilter/nf_conntrack_helper.h +++ b/include/net/netfilter/nf_conntrack_helper.h @@ -50,6 +50,8 @@ extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp); extern int __nf_ct_try_assign_helper(struct nf_conn *ct, gfp_t flags); +extern void nf_ct_helper_destroy(struct nf_conn *ct); + static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct) { return nf_ct_ext_find(ct, NF_CT_EXT_HELPER); diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h index ba32ed7bdabe..3767fb41e541 100644 --- a/include/net/netfilter/nf_conntrack_l4proto.h +++ b/include/net/netfilter/nf_conntrack_l4proto.h @@ -59,11 +59,11 @@ struct nf_conntrack_l4proto const struct nf_conntrack_tuple *); /* Print out the private part of the conntrack. */ - int (*print_conntrack)(struct seq_file *s, const struct nf_conn *); + int (*print_conntrack)(struct seq_file *s, struct nf_conn *); /* convert protoinfo to nfnetink attributes */ int (*to_nlattr)(struct sk_buff *skb, struct nlattr *nla, - const struct nf_conn *ct); + struct nf_conn *ct); /* Calculate protoinfo nlattr size */ int (*nlattr_size)(void); diff --git a/include/net/netlink.h b/include/net/netlink.h index eddb50289d6d..007bdb07dabb 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -940,6 +940,15 @@ static inline u64 nla_get_u64(const struct nlattr *nla) } /** + * nla_get_be64 - return payload of __be64 attribute + * @nla: __be64 netlink attribute + */ +static inline __be64 nla_get_be64(const struct nlattr *nla) +{ + return *(__be64 *) nla_data(nla); +} + +/** * nla_get_flag - return payload of flag attribute * @nla: flag netlink attribute */ diff --git a/include/net/netns/conntrack.h b/include/net/netns/conntrack.h index 9dc58402bc09..ba1ba0c5efd1 100644 --- a/include/net/netns/conntrack.h +++ b/include/net/netns/conntrack.h @@ -14,16 +14,17 @@ struct netns_ct { struct hlist_nulls_head *hash; struct hlist_head *expect_hash; struct hlist_nulls_head unconfirmed; + struct hlist_nulls_head dying; struct ip_conntrack_stat *stat; -#ifdef CONFIG_NF_CONNTRACK_EVENTS - struct nf_conntrack_ecache *ecache; -#endif + int sysctl_events; + unsigned int sysctl_events_retry_timeout; int sysctl_acct; int sysctl_checksum; unsigned int sysctl_log_invalid; /* Log invalid packets */ #ifdef CONFIG_SYSCTL struct ctl_table_header *sysctl_header; struct ctl_table_header *acct_sysctl_header; + struct ctl_table_header *event_sysctl_header; #endif int hash_vmalloc; int expect_vmalloc; diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index e37fe3129c17..82a3191375f5 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -41,16 +41,17 @@ static inline void *qdisc_priv(struct Qdisc *q) typedef u64 psched_time_t; typedef long psched_tdiff_t; -/* Avoid doing 64 bit divide by 1000 */ -#define PSCHED_US2NS(x) ((s64)(x) << 10) -#define PSCHED_NS2US(x) ((x) >> 10) +/* Avoid doing 64 bit divide */ +#define PSCHED_SHIFT 6 +#define PSCHED_TICKS2NS(x) ((s64)(x) << PSCHED_SHIFT) +#define PSCHED_NS2TICKS(x) ((x) >> PSCHED_SHIFT) -#define PSCHED_TICKS_PER_SEC PSCHED_NS2US(NSEC_PER_SEC) +#define PSCHED_TICKS_PER_SEC PSCHED_NS2TICKS(NSEC_PER_SEC) #define PSCHED_PASTPERFECT 0 static inline psched_time_t psched_get_time(void) { - return PSCHED_NS2US(ktime_to_ns(ktime_get())); + return PSCHED_NS2TICKS(ktime_to_ns(ktime_get())); } static inline psched_tdiff_t diff --git a/include/net/regulatory.h b/include/net/regulatory.h new file mode 100644 index 000000000000..47995b81c5d7 --- /dev/null +++ b/include/net/regulatory.h @@ -0,0 +1,101 @@ +#ifndef __NET_REGULATORY_H +#define __NET_REGULATORY_H +/* + * regulatory support structures + * + * Copyright 2008-2009 Luis R. Rodriguez <lrodriguez@atheros.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +/** + * enum environment_cap - Environment parsed from country IE + * @ENVIRON_ANY: indicates country IE applies to both indoor and + * outdoor operation. + * @ENVIRON_INDOOR: indicates country IE applies only to indoor operation + * @ENVIRON_OUTDOOR: indicates country IE applies only to outdoor operation + */ +enum environment_cap { + ENVIRON_ANY, + ENVIRON_INDOOR, + ENVIRON_OUTDOOR, +}; + +/** + * struct regulatory_request - used to keep track of regulatory requests + * + * @wiphy_idx: this is set if this request's initiator is + * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This + * can be used by the wireless core to deal with conflicts + * and potentially inform users of which devices specifically + * cased the conflicts. + * @initiator: indicates who sent this request, could be any of + * of those set in nl80211_reg_initiator (%NL80211_REGDOM_SET_BY_*) + * @alpha2: the ISO / IEC 3166 alpha2 country code of the requested + * regulatory domain. We have a few special codes: + * 00 - World regulatory domain + * 99 - built by driver but a specific alpha2 cannot be determined + * 98 - result of an intersection between two regulatory domains + * @intersect: indicates whether the wireless core should intersect + * the requested regulatory domain with the presently set regulatory + * domain. + * @country_ie_checksum: checksum of the last processed and accepted + * country IE + * @country_ie_env: lets us know if the AP is telling us we are outdoor, + * indoor, or if it doesn't matter + * @list: used to insert into the reg_requests_list linked list + */ +struct regulatory_request { + int wiphy_idx; + enum nl80211_reg_initiator initiator; + char alpha2[2]; + bool intersect; + u32 country_ie_checksum; + enum environment_cap country_ie_env; + struct list_head list; +}; + +struct ieee80211_freq_range { + u32 start_freq_khz; + u32 end_freq_khz; + u32 max_bandwidth_khz; +}; + +struct ieee80211_power_rule { + u32 max_antenna_gain; + u32 max_eirp; +}; + +struct ieee80211_reg_rule { + struct ieee80211_freq_range freq_range; + struct ieee80211_power_rule power_rule; + u32 flags; +}; + +struct ieee80211_regdomain { + u32 n_reg_rules; + char alpha2[2]; + struct ieee80211_reg_rule reg_rules[]; +}; + +#define MHZ_TO_KHZ(freq) ((freq) * 1000) +#define KHZ_TO_MHZ(freq) ((freq) / 1000) +#define DBI_TO_MBI(gain) ((gain) * 100) +#define MBI_TO_DBI(gain) ((gain) / 100) +#define DBM_TO_MBM(gain) ((gain) * 100) +#define MBM_TO_DBM(gain) ((gain) / 100) + +#define REG_RULE(start, end, bw, gain, eirp, reg_flags) \ +{ \ + .freq_range.start_freq_khz = MHZ_TO_KHZ(start), \ + .freq_range.end_freq_khz = MHZ_TO_KHZ(end), \ + .freq_range.max_bandwidth_khz = MHZ_TO_KHZ(bw), \ + .power_rule.max_antenna_gain = DBI_TO_MBI(gain),\ + .power_rule.max_eirp = DBM_TO_MBM(eirp), \ + .flags = reg_flags, \ +} + +#endif diff --git a/include/net/route.h b/include/net/route.h index 4e8cae0e5841..40f6346ef496 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -210,7 +210,7 @@ static inline struct inet_peer *rt_get_peer(struct rtable *rt) static inline int inet_iif(const struct sk_buff *skb) { - return skb->rtable->rt_iif; + return skb_rtable(skb)->rt_iif; } #endif /* _ROUTE_H */ diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 23f08fe1d50a..edfcacf3250e 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1939,10 +1939,8 @@ void sctp_association_free(struct sctp_association *); void sctp_association_put(struct sctp_association *); void sctp_association_hold(struct sctp_association *); -struct sctp_transport *sctp_assoc_choose_init_transport( - struct sctp_association *); -struct sctp_transport *sctp_assoc_choose_shutdown_transport( - struct sctp_association *); +struct sctp_transport *sctp_assoc_choose_alter_transport( + struct sctp_association *, struct sctp_transport *); void sctp_assoc_update_retran_path(struct sctp_association *); struct sctp_transport *sctp_assoc_lookup_paddr(const struct sctp_association *, const union sctp_addr *); diff --git a/include/net/sctp/user.h b/include/net/sctp/user.h index b259fc5798fb..1580c04f68bc 100644 --- a/include/net/sctp/user.h +++ b/include/net/sctp/user.h @@ -147,6 +147,8 @@ enum sctp_optname { #define SCTP_GET_LOCAL_ADDRS SCTP_GET_LOCAL_ADDRS SCTP_SOCKOPT_CONNECTX, /* CONNECTX requests. */ #define SCTP_SOCKOPT_CONNECTX SCTP_SOCKOPT_CONNECTX + SCTP_SOCKOPT_CONNECTX3, /* CONNECTX requests. (new implementation) */ +#define SCTP_SOCKOPT_CONNECTX3 SCTP_SOCKOPT_CONNECTX3 }; /* diff --git a/include/net/snmp.h b/include/net/snmp.h index 57c93628695f..8c842e06bec8 100644 --- a/include/net/snmp.h +++ b/include/net/snmp.h @@ -153,6 +153,11 @@ struct linux_xfrm_mib { per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field]--; \ put_cpu(); \ } while (0) +#define SNMP_ADD_STATS(mib, field, addend) \ + do { \ + per_cpu_ptr(mib[!in_softirq()], get_cpu())->mibs[field] += addend; \ + put_cpu(); \ + } while (0) #define SNMP_ADD_STATS_BH(mib, field, addend) \ (per_cpu_ptr(mib[0], raw_smp_processor_id())->mibs[field] += addend) #define SNMP_ADD_STATS_USER(mib, field, addend) \ @@ -160,5 +165,17 @@ struct linux_xfrm_mib { per_cpu_ptr(mib[1], get_cpu())->mibs[field] += addend; \ put_cpu(); \ } while (0) - +#define SNMP_UPD_PO_STATS(mib, basefield, addend) \ + do { \ + __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], get_cpu());\ + ptr->mibs[basefield##PKTS]++; \ + ptr->mibs[basefield##OCTETS] += addend;\ + put_cpu(); \ + } while (0) +#define SNMP_UPD_PO_STATS_BH(mib, basefield, addend) \ + do { \ + __typeof__(mib[0]) ptr = per_cpu_ptr(mib[!in_softirq()], raw_smp_processor_id());\ + ptr->mibs[basefield##PKTS]++; \ + ptr->mibs[basefield##OCTETS] += addend;\ + } while (0) #endif diff --git a/include/net/sock.h b/include/net/sock.h index 4bb1ff9fd15b..010e14a93c92 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1217,9 +1217,13 @@ static inline int skb_copy_to_page(struct sock *sk, char __user *from, static inline void skb_set_owner_w(struct sk_buff *skb, struct sock *sk) { - sock_hold(sk); skb->sk = sk; skb->destructor = sock_wfree; + /* + * We used to take a refcount on sk, but following operation + * is enough to guarantee sk_free() wont free this sock until + * all in-flight packets are completed + */ atomic_add(skb->truesize, &sk->sk_wmem_alloc); } diff --git a/include/net/tcp.h b/include/net/tcp.h index 646dbe3962ea..19f4150f4d4d 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -266,6 +266,19 @@ static inline int tcp_too_many_orphans(struct sock *sk, int num) atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2]); } +/* syncookies: remember time of last synqueue overflow */ +static inline void tcp_synq_overflow(struct sock *sk) +{ + tcp_sk(sk)->rx_opt.ts_recent_stamp = jiffies; +} + +/* syncookies: no recent synqueue overflow on this listening socket? */ +static inline int tcp_synq_no_recent_overflow(const struct sock *sk) +{ + unsigned long last_overflow = tcp_sk(sk)->rx_opt.ts_recent_stamp; + return time_after(jiffies, last_overflow + TCP_TIMEOUT_INIT); +} + extern struct proto tcp_prot; #define TCP_INC_STATS(net, field) SNMP_INC_STATS((net)->mib.tcp_statistics, field) @@ -889,30 +902,32 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) { struct tcp_sock *tp = tcp_sk(sk); - if (!sysctl_tcp_low_latency && tp->ucopy.task) { - __skb_queue_tail(&tp->ucopy.prequeue, skb); - tp->ucopy.memory += skb->truesize; - if (tp->ucopy.memory > sk->sk_rcvbuf) { - struct sk_buff *skb1; - - BUG_ON(sock_owned_by_user(sk)); - - while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) { - sk_backlog_rcv(sk, skb1); - NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPPREQUEUEDROPPED); - } - - tp->ucopy.memory = 0; - } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) { - wake_up_interruptible(sk->sk_sleep); - if (!inet_csk_ack_scheduled(sk)) - inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * tcp_rto_min(sk)) / 4, - TCP_RTO_MAX); + if (sysctl_tcp_low_latency || !tp->ucopy.task) + return 0; + + __skb_queue_tail(&tp->ucopy.prequeue, skb); + tp->ucopy.memory += skb->truesize; + if (tp->ucopy.memory > sk->sk_rcvbuf) { + struct sk_buff *skb1; + + BUG_ON(sock_owned_by_user(sk)); + + while ((skb1 = __skb_dequeue(&tp->ucopy.prequeue)) != NULL) { + sk_backlog_rcv(sk, skb1); + NET_INC_STATS_BH(sock_net(sk), + LINUX_MIB_TCPPREQUEUEDROPPED); } - return 1; + + tp->ucopy.memory = 0; + } else if (skb_queue_len(&tp->ucopy.prequeue) == 1) { + wake_up_interruptible_poll(sk->sk_sleep, + POLLIN | POLLRDNORM | POLLRDBAND); + if (!inet_csk_ack_scheduled(sk)) + inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, + (3 * tcp_rto_min(sk)) / 4, + TCP_RTO_MAX); } - return 0; + return 1; } diff --git a/include/net/wimax.h b/include/net/wimax.h index 6b3824edb39e..2af7bf839f23 100644 --- a/include/net/wimax.h +++ b/include/net/wimax.h @@ -253,7 +253,6 @@ struct net_device; struct genl_info; struct wimax_dev; -struct input_dev; /** * struct wimax_dev - Generic WiMAX device @@ -293,8 +292,8 @@ struct input_dev; * See wimax_reset()'s documentation. * * @name: [fill] A way to identify this device. We need to register a - * name with many subsystems (input for RFKILL, workqueue - * creation, etc). We can't use the network device name as that + * name with many subsystems (rfkill, workqueue creation, etc). + * We can't use the network device name as that * might change and in some instances we don't know it yet (until * we don't call register_netdev()). So we generate an unique one * using the driver name and device bus id, place it here and use @@ -316,9 +315,6 @@ struct input_dev; * * @rfkill: [private] integration into the RF-Kill infrastructure. * - * @rfkill_input: [private] virtual input device to process the - * hardware RF Kill switches. - * * @rf_sw: [private] State of the software radio switch (OFF/ON) * * @rf_hw: [private] State of the hardware radio switch (OFF/ON) diff --git a/include/net/wireless.h b/include/net/wireless.h deleted file mode 100644 index 64a76208580c..000000000000 --- a/include/net/wireless.h +++ /dev/null @@ -1,472 +0,0 @@ -#ifndef __NET_WIRELESS_H -#define __NET_WIRELESS_H - -/* - * 802.11 device management - * - * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> - */ - -#include <linux/netdevice.h> -#include <linux/debugfs.h> -#include <linux/list.h> -#include <linux/ieee80211.h> -#include <net/cfg80211.h> - -/** - * enum ieee80211_band - supported frequency bands - * - * The bands are assigned this way because the supported - * bitrates differ in these bands. - * - * @IEEE80211_BAND_2GHZ: 2.4GHz ISM band - * @IEEE80211_BAND_5GHZ: around 5GHz band (4.9-5.7) - */ -enum ieee80211_band { - IEEE80211_BAND_2GHZ, - IEEE80211_BAND_5GHZ, - - /* keep last */ - IEEE80211_NUM_BANDS -}; - -/** - * enum ieee80211_channel_flags - channel flags - * - * Channel flags set by the regulatory control code. - * - * @IEEE80211_CHAN_DISABLED: This channel is disabled. - * @IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted - * on this channel. - * @IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel. - * @IEEE80211_CHAN_RADAR: Radar detection is required on this channel. - * @IEEE80211_CHAN_NO_FAT_ABOVE: extension channel above this channel - * is not permitted. - * @IEEE80211_CHAN_NO_FAT_BELOW: extension channel below this channel - * is not permitted. - */ -enum ieee80211_channel_flags { - IEEE80211_CHAN_DISABLED = 1<<0, - IEEE80211_CHAN_PASSIVE_SCAN = 1<<1, - IEEE80211_CHAN_NO_IBSS = 1<<2, - IEEE80211_CHAN_RADAR = 1<<3, - IEEE80211_CHAN_NO_FAT_ABOVE = 1<<4, - IEEE80211_CHAN_NO_FAT_BELOW = 1<<5, -}; - -/** - * struct ieee80211_channel - channel definition - * - * This structure describes a single channel for use - * with cfg80211. - * - * @center_freq: center frequency in MHz - * @max_bandwidth: maximum allowed bandwidth for this channel, in MHz - * @hw_value: hardware-specific value for the channel - * @flags: channel flags from &enum ieee80211_channel_flags. - * @orig_flags: channel flags at registration time, used by regulatory - * code to support devices with additional restrictions - * @band: band this channel belongs to. - * @max_antenna_gain: maximum antenna gain in dBi - * @max_power: maximum transmission power (in dBm) - * @beacon_found: helper to regulatory code to indicate when a beacon - * has been found on this channel. Use regulatory_hint_found_beacon() - * to enable this, this is is useful only on 5 GHz band. - * @orig_mag: internal use - * @orig_mpwr: internal use - */ -struct ieee80211_channel { - enum ieee80211_band band; - u16 center_freq; - u8 max_bandwidth; - u16 hw_value; - u32 flags; - int max_antenna_gain; - int max_power; - bool beacon_found; - u32 orig_flags; - int orig_mag, orig_mpwr; -}; - -/** - * enum ieee80211_rate_flags - rate flags - * - * Hardware/specification flags for rates. These are structured - * in a way that allows using the same bitrate structure for - * different bands/PHY modes. - * - * @IEEE80211_RATE_SHORT_PREAMBLE: Hardware can send with short - * preamble on this bitrate; only relevant in 2.4GHz band and - * with CCK rates. - * @IEEE80211_RATE_MANDATORY_A: This bitrate is a mandatory rate - * when used with 802.11a (on the 5 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_B: This bitrate is a mandatory rate - * when used with 802.11b (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_MANDATORY_G: This bitrate is a mandatory rate - * when used with 802.11g (on the 2.4 GHz band); filled by the - * core code when registering the wiphy. - * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. - */ -enum ieee80211_rate_flags { - IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, - IEEE80211_RATE_MANDATORY_A = 1<<1, - IEEE80211_RATE_MANDATORY_B = 1<<2, - IEEE80211_RATE_MANDATORY_G = 1<<3, - IEEE80211_RATE_ERP_G = 1<<4, -}; - -/** - * struct ieee80211_rate - bitrate definition - * - * This structure describes a bitrate that an 802.11 PHY can - * operate with. The two values @hw_value and @hw_value_short - * are only for driver use when pointers to this structure are - * passed around. - * - * @flags: rate-specific flags - * @bitrate: bitrate in units of 100 Kbps - * @hw_value: driver/hardware value for this rate - * @hw_value_short: driver/hardware value for this rate when - * short preamble is used - */ -struct ieee80211_rate { - u32 flags; - u16 bitrate; - u16 hw_value, hw_value_short; -}; - -/** - * struct ieee80211_sta_ht_cap - STA's HT capabilities - * - * This structure describes most essential parameters needed - * to describe 802.11n HT capabilities for an STA. - * - * @ht_supported: is HT supported by the STA - * @cap: HT capabilities map as described in 802.11n spec - * @ampdu_factor: Maximum A-MPDU length factor - * @ampdu_density: Minimum A-MPDU spacing - * @mcs: Supported MCS rates - */ -struct ieee80211_sta_ht_cap { - u16 cap; /* use IEEE80211_HT_CAP_ */ - bool ht_supported; - u8 ampdu_factor; - u8 ampdu_density; - struct ieee80211_mcs_info mcs; -}; - -/** - * struct ieee80211_supported_band - frequency band definition - * - * This structure describes a frequency band a wiphy - * is able to operate in. - * - * @channels: Array of channels the hardware can operate in - * in this band. - * @band: the band this structure represents - * @n_channels: Number of channels in @channels - * @bitrates: Array of bitrates the hardware can operate with - * in this band. Must be sorted to give a valid "supported - * rates" IE, i.e. CCK rates first, then OFDM. - * @n_bitrates: Number of bitrates in @bitrates - */ -struct ieee80211_supported_band { - struct ieee80211_channel *channels; - struct ieee80211_rate *bitrates; - enum ieee80211_band band; - int n_channels; - int n_bitrates; - struct ieee80211_sta_ht_cap ht_cap; -}; - -/** - * struct wiphy - wireless hardware description - * @idx: the wiphy index assigned to this item - * @class_dev: the class device representing /sys/class/ieee80211/<wiphy-name> - * @custom_regulatory: tells us the driver for this device - * has its own custom regulatory domain and cannot identify the - * ISO / IEC 3166 alpha2 it belongs to. When this is enabled - * we will disregard the first regulatory hint (when the - * initiator is %REGDOM_SET_BY_CORE). - * @strict_regulatory: tells us the driver for this device will ignore - * regulatory domain settings until it gets its own regulatory domain - * via its regulatory_hint(). After its gets its own regulatory domain - * it will only allow further regulatory domain settings to further - * enhance compliance. For example if channel 13 and 14 are disabled - * by this regulatory domain no user regulatory domain can enable these - * channels at a later time. This can be used for devices which do not - * have calibration information gauranteed for frequencies or settings - * outside of its regulatory domain. - * @reg_notifier: the driver's regulatory notification callback - * @regd: the driver's regulatory domain, if one was requested via - * the regulatory_hint() API. This can be used by the driver - * on the reg_notifier() if it chooses to ignore future - * regulatory domain changes caused by other drivers. - * @signal_type: signal type reported in &struct cfg80211_bss. - */ -struct wiphy { - /* assign these fields before you register the wiphy */ - - /* permanent MAC address */ - u8 perm_addr[ETH_ALEN]; - - /* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */ - u16 interface_modes; - - bool custom_regulatory; - bool strict_regulatory; - - enum cfg80211_signal_type signal_type; - - int bss_priv_size; - u8 max_scan_ssids; - - /* If multiple wiphys are registered and you're handed e.g. - * a regular netdev with assigned ieee80211_ptr, you won't - * know whether it points to a wiphy your driver has registered - * or not. Assign this to something global to your driver to - * help determine whether you own this wiphy or not. */ - void *privid; - - struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; - - /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); - - /* fields below are read-only, assigned by cfg80211 */ - - const struct ieee80211_regdomain *regd; - - /* the item in /sys/class/ieee80211/ points to this, - * you need use set_wiphy_dev() (see below) */ - struct device dev; - - /* dir in debugfs: ieee80211/<wiphyname> */ - struct dentry *debugfsdir; - - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); -}; - -/** struct wireless_dev - wireless per-netdev state - * - * This structure must be allocated by the driver/stack - * that uses the ieee80211_ptr field in struct net_device - * (this is intentional so it can be allocated along with - * the netdev.) - * - * @wiphy: pointer to hardware description - * @iftype: interface type - */ -struct wireless_dev { - struct wiphy *wiphy; - enum nl80211_iftype iftype; - - /* private to the generic wireless code */ - struct list_head list; - struct net_device *netdev; -}; - -/** - * wiphy_priv - return priv from wiphy - */ -static inline void *wiphy_priv(struct wiphy *wiphy) -{ - BUG_ON(!wiphy); - return &wiphy->priv; -} - -/** - * set_wiphy_dev - set device pointer for wiphy - */ -static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) -{ - wiphy->dev.parent = dev; -} - -/** - * wiphy_dev - get wiphy dev pointer - */ -static inline struct device *wiphy_dev(struct wiphy *wiphy) -{ - return wiphy->dev.parent; -} - -/** - * wiphy_name - get wiphy name - */ -static inline const char *wiphy_name(struct wiphy *wiphy) -{ - return dev_name(&wiphy->dev); -} - -/** - * wdev_priv - return wiphy priv from wireless_dev - */ -static inline void *wdev_priv(struct wireless_dev *wdev) -{ - BUG_ON(!wdev); - return wiphy_priv(wdev->wiphy); -} - -/** - * wiphy_new - create a new wiphy for use with cfg80211 - * - * create a new wiphy and associate the given operations with it. - * @sizeof_priv bytes are allocated for private use. - * - * the returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. - */ -struct wiphy *wiphy_new(struct cfg80211_ops *ops, int sizeof_priv); - -/** - * wiphy_register - register a wiphy with cfg80211 - * - * register the given wiphy - * - * Returns a non-negative wiphy index or a negative error code. - */ -extern int wiphy_register(struct wiphy *wiphy); - -/** - * wiphy_unregister - deregister a wiphy from cfg80211 - * - * unregister a device with the given priv pointer. - * After this call, no more requests can be made with this priv - * pointer, but the call may sleep to wait for an outstanding - * request that is being handled. - */ -extern void wiphy_unregister(struct wiphy *wiphy); - -/** - * wiphy_free - free wiphy - */ -extern void wiphy_free(struct wiphy *wiphy); - -/** - * ieee80211_channel_to_frequency - convert channel number to frequency - */ -extern int ieee80211_channel_to_frequency(int chan); - -/** - * ieee80211_frequency_to_channel - convert frequency to channel number - */ -extern int ieee80211_frequency_to_channel(int freq); - -/* - * Name indirection necessary because the ieee80211 code also has - * a function named "ieee80211_get_channel", so if you include - * cfg80211's header file you get cfg80211's version, if you try - * to include both header files you'll (rightfully!) get a symbol - * clash. - */ -extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, - int freq); -/** - * ieee80211_get_channel - get channel struct from wiphy for specified frequency - */ -static inline struct ieee80211_channel * -ieee80211_get_channel(struct wiphy *wiphy, int freq) -{ - return __ieee80211_get_channel(wiphy, freq); -} - -/** - * ieee80211_get_response_rate - get basic rate for a given rate - * - * @sband: the band to look for rates in - * @basic_rates: bitmap of basic rates - * @bitrate: the bitrate for which to find the basic rate - * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. - */ -struct ieee80211_rate * -ieee80211_get_response_rate(struct ieee80211_supported_band *sband, - u32 basic_rates, int bitrate); - -/** - * regulatory_hint - driver hint to the wireless core a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @alpha2: the ISO/IEC 3166 alpha2 the driver claims its regulatory domain - * should be in. If @rd is set this should be NULL. Note that if you - * set this to NULL you should still set rd->alpha2 to some accepted - * alpha2. - * - * Wireless drivers can use this function to hint to the wireless core - * what it believes should be the current regulatory domain by - * giving it an ISO/IEC 3166 alpha2 country code it knows its regulatory - * domain should be in or by providing a completely build regulatory domain. - * If the driver provides an ISO/IEC 3166 alpha2 userspace will be queried - * for a regulatory domain structure for the respective country. - * - * The wiphy must have been registered to cfg80211 prior to this call. - * For cfg80211 drivers this means you must first use wiphy_register(), - * for mac80211 drivers you must first use ieee80211_register_hw(). - * - * Drivers should check the return value, its possible you can get - * an -ENOMEM. - */ -extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); - -/** - * regulatory_hint_11d - hints a country IE as a regulatory domain - * @wiphy: the wireless device giving the hint (used only for reporting - * conflicts) - * @country_ie: pointer to the country IE - * @country_ie_len: length of the country IE - * - * We will intersect the rd with the what CRDA tells us should apply - * for the alpha2 this country IE belongs to, this prevents APs from - * sending us incorrect or outdated information against a country. - */ -extern void regulatory_hint_11d(struct wiphy *wiphy, - u8 *country_ie, - u8 country_ie_len); -/** - * wiphy_apply_custom_regulatory - apply a custom driver regulatory domain - * @wiphy: the wireless device we want to process the regulatory domain on - * @regd: the custom regulatory domain to use for this wiphy - * - * Drivers can sometimes have custom regulatory domains which do not apply - * to a specific country. Drivers can use this to apply such custom regulatory - * domains. This routine must be called prior to wiphy registration. The - * custom regulatory domain will be trusted completely and as such previous - * default channel settings will be disregarded. If no rule is found for a - * channel on the regulatory domain the channel will be disabled. - */ -extern void wiphy_apply_custom_regulatory( - struct wiphy *wiphy, - const struct ieee80211_regdomain *regd); - -/** - * freq_reg_info - get regulatory information for the given frequency - * @wiphy: the wiphy for which we want to process this rule for - * @center_freq: Frequency in KHz for which we want regulatory information for - * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one - * you can set this to 0. If this frequency is allowed we then set - * this value to the maximum allowed bandwidth. - * @reg_rule: the regulatory rule which we have for this frequency - * - * Use this function to get the regulatory rule for a specific frequency on - * a given wireless device. If the device has a specific regulatory domain - * it wants to follow we respect that unless a country IE has been received - * and processed already. - * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. - */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth, - const struct ieee80211_reg_rule **reg_rule); - -#endif /* __NET_WIRELESS_H */ diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 2e9f5c0018ae..736bca450886 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -994,7 +994,7 @@ static inline int __xfrm_policy_check2(struct sock *sk, int dir, return __xfrm_policy_check(sk, ndir, skb, family); return (!net->xfrm.policy_count[dir] && !skb->sp) || - (skb->dst->flags & DST_NOPOLICY) || + (skb_dst(skb)->flags & DST_NOPOLICY) || __xfrm_policy_check(sk, ndir, skb, family); } @@ -1048,7 +1048,7 @@ static inline int xfrm_route_forward(struct sk_buff *skb, unsigned short family) struct net *net = dev_net(skb->dev); return !net->xfrm.policy_count[XFRM_POLICY_OUT] || - (skb->dst->flags & DST_NOXFRM) || + (skb_dst(skb)->flags & DST_NOXFRM) || __xfrm_route_forward(skb, family); } diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 666cc131732e..b2410605b740 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -73,6 +73,7 @@ enum fip_state { * @link: current link status for libfc. * @last_link: last link state reported to libfc. * @map_dest: use the FC_MAP mode for destination MAC addresses. + * @spma: supports SPMA server-provided MACs mode * @dest_addr: MAC address of the selected FC forwarder. * @ctl_src_addr: the native MAC address of our local port. * @data_src_addr: the assigned MAC address for the local port after FLOGI. @@ -104,6 +105,7 @@ struct fcoe_ctlr { u8 link; u8 last_link; u8 map_dest; + u8 spma; u8 dest_addr[ETH_ALEN]; u8 ctl_src_addr[ETH_ALEN]; u8 data_src_addr[ETH_ALEN]; diff --git a/include/trace/events/napi.h b/include/trace/events/napi.h new file mode 100644 index 000000000000..a8989c4547e7 --- /dev/null +++ b/include/trace/events/napi.h @@ -0,0 +1,11 @@ +#ifndef _TRACE_NAPI_H_ +#define _TRACE_NAPI_H_ + +#include <linux/netdevice.h> +#include <linux/tracepoint.h> + +DECLARE_TRACE(napi_poll, + TP_PROTO(struct napi_struct *napi), + TP_ARGS(napi)); + +#endif |
