summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/bcma/bcma.h54
-rw-r--r--include/linux/bcma/bcma_driver_chipcommon.h3
-rw-r--r--include/linux/ieee80211.h52
-rw-r--r--include/linux/socket.h1
-rw-r--r--include/linux/ssb/ssb.h60
-rw-r--r--include/linux/ssb/ssb_regs.h10
-rw-r--r--include/net/bluetooth/bluetooth.h12
-rw-r--r--include/net/bluetooth/hci.h21
-rw-r--r--include/net/bluetooth/hci_core.h28
-rw-r--r--include/net/bluetooth/rfcomm.h6
-rw-r--r--include/net/cfg80211.h126
-rw-r--r--include/net/mac80211.h97
-rw-r--r--include/uapi/linux/nfc.h16
-rw-r--r--include/uapi/linux/nl80211.h117
14 files changed, 494 insertions, 109 deletions
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index e0ce311011c0..0ab6712fd76b 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -173,6 +173,60 @@ struct bcma_host_ops {
#define BCMA_CHIP_ID_BCM53572 53572
#define BCMA_PKG_ID_BCM47188 9
+/* Board types (on PCI usually equals to the subsystem dev id) */
+/* BCM4313 */
+#define BCMA_BOARD_TYPE_BCM94313BU 0X050F
+#define BCMA_BOARD_TYPE_BCM94313HM 0X0510
+#define BCMA_BOARD_TYPE_BCM94313EPA 0X0511
+#define BCMA_BOARD_TYPE_BCM94313HMG 0X051C
+/* BCM4716 */
+#define BCMA_BOARD_TYPE_BCM94716NR2 0X04CD
+/* BCM43224 */
+#define BCMA_BOARD_TYPE_BCM943224X21 0X056E
+#define BCMA_BOARD_TYPE_BCM943224X21_FCC 0X00D1
+#define BCMA_BOARD_TYPE_BCM943224X21B 0X00E9
+#define BCMA_BOARD_TYPE_BCM943224M93 0X008B
+#define BCMA_BOARD_TYPE_BCM943224M93A 0X0090
+#define BCMA_BOARD_TYPE_BCM943224X16 0X0093
+#define BCMA_BOARD_TYPE_BCM94322X9 0X008D
+#define BCMA_BOARD_TYPE_BCM94322M35E 0X008E
+/* BCM43228 */
+#define BCMA_BOARD_TYPE_BCM943228BU8 0X0540
+#define BCMA_BOARD_TYPE_BCM943228BU9 0X0541
+#define BCMA_BOARD_TYPE_BCM943228BU 0X0542
+#define BCMA_BOARD_TYPE_BCM943227HM4L 0X0543
+#define BCMA_BOARD_TYPE_BCM943227HMB 0X0544
+#define BCMA_BOARD_TYPE_BCM943228HM4L 0X0545
+#define BCMA_BOARD_TYPE_BCM943228SD 0X0573
+/* BCM4331 */
+#define BCMA_BOARD_TYPE_BCM94331X19 0X00D6
+#define BCMA_BOARD_TYPE_BCM94331X28 0X00E4
+#define BCMA_BOARD_TYPE_BCM94331X28B 0X010E
+#define BCMA_BOARD_TYPE_BCM94331PCIEBT3AX 0X00E4
+#define BCMA_BOARD_TYPE_BCM94331X12_2G 0X00EC
+#define BCMA_BOARD_TYPE_BCM94331X12_5G 0X00ED
+#define BCMA_BOARD_TYPE_BCM94331X29B 0X00EF
+#define BCMA_BOARD_TYPE_BCM94331CSAX 0X00EF
+#define BCMA_BOARD_TYPE_BCM94331X19C 0X00F5
+#define BCMA_BOARD_TYPE_BCM94331X33 0X00F4
+#define BCMA_BOARD_TYPE_BCM94331BU 0X0523
+#define BCMA_BOARD_TYPE_BCM94331S9BU 0X0524
+#define BCMA_BOARD_TYPE_BCM94331MC 0X0525
+#define BCMA_BOARD_TYPE_BCM94331MCI 0X0526
+#define BCMA_BOARD_TYPE_BCM94331PCIEBT4 0X0527
+#define BCMA_BOARD_TYPE_BCM94331HM 0X0574
+#define BCMA_BOARD_TYPE_BCM94331PCIEDUAL 0X059B
+#define BCMA_BOARD_TYPE_BCM94331MCH5 0X05A9
+#define BCMA_BOARD_TYPE_BCM94331CS 0X05C6
+#define BCMA_BOARD_TYPE_BCM94331CD 0X05DA
+/* BCM53572 */
+#define BCMA_BOARD_TYPE_BCM953572BU 0X058D
+#define BCMA_BOARD_TYPE_BCM953572NR2 0X058E
+#define BCMA_BOARD_TYPE_BCM947188NR2 0X058F
+#define BCMA_BOARD_TYPE_BCM953572SDRNR2 0X0590
+/* BCM43142 */
+#define BCMA_BOARD_TYPE_BCM943142HM 0X05E0
+
struct bcma_device {
struct bcma_bus *bus;
struct bcma_device_id id;
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
index 8390c474f69a..453fcc914683 100644
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -104,6 +104,7 @@
#define BCMA_CC_CHIPST_4706_MIPS_BENDIAN BIT(3) /* 0: little, 1: big endian */
#define BCMA_CC_CHIPST_4706_PCIE1_DISABLE BIT(5) /* PCIE1 enable strap pin */
#define BCMA_CC_CHIPST_5357_NAND_BOOT BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
+#define BCMA_CC_CHIPST_4360_XTAL_40MZ 0x00000001
#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */
#define BCMA_CC_JCMD_START 0x80000000
#define BCMA_CC_JCMD_BUSY 0x80000000
@@ -607,6 +608,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
+extern u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc);
+
void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 7e24fe0cfbcd..4cf0c9e4dd99 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -113,6 +113,34 @@
#define IEEE80211_CTL_EXT_SSW_FBACK 0x9000
#define IEEE80211_CTL_EXT_SSW_ACK 0xa000
+
+#define IEEE80211_SN_MASK ((IEEE80211_SCTL_SEQ) >> 4)
+#define IEEE80211_MAX_SN IEEE80211_SN_MASK
+#define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1)
+
+static inline int ieee80211_sn_less(u16 sn1, u16 sn2)
+{
+ return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1);
+}
+
+static inline u16 ieee80211_sn_add(u16 sn1, u16 sn2)
+{
+ return (sn1 + sn2) & IEEE80211_SN_MASK;
+}
+
+static inline u16 ieee80211_sn_inc(u16 sn)
+{
+ return ieee80211_sn_add(sn, 1);
+}
+
+static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
+{
+ return (sn1 - sn2) & IEEE80211_SN_MASK;
+}
+
+#define IEEE80211_SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+#define IEEE80211_SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
+
/* miscellaneous IEEE 802.11 constants */
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
#define IEEE80211_MAX_RTS_THRESHOLD 2353
@@ -185,7 +213,7 @@ struct ieee80211_hdr {
u8 addr3[6];
__le16 seq_ctrl;
u8 addr4[6];
-} __packed;
+} __packed __aligned(2);
struct ieee80211_hdr_3addr {
__le16 frame_control;
@@ -194,7 +222,7 @@ struct ieee80211_hdr_3addr {
u8 addr2[6];
u8 addr3[6];
__le16 seq_ctrl;
-} __packed;
+} __packed __aligned(2);
struct ieee80211_qos_hdr {
__le16 frame_control;
@@ -204,7 +232,7 @@ struct ieee80211_qos_hdr {
u8 addr3[6];
__le16 seq_ctrl;
__le16 qos_ctrl;
-} __packed;
+} __packed __aligned(2);
/**
* ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
@@ -581,7 +609,7 @@ struct ieee80211s_hdr {
__le32 seqnum;
u8 eaddr1[6];
u8 eaddr2[6];
-} __packed;
+} __packed __aligned(2);
/* Mesh flags */
#define MESH_FLAGS_AE_A4 0x1
@@ -875,7 +903,7 @@ struct ieee80211_mgmt {
} u;
} __packed action;
} u;
-} __packed;
+} __packed __aligned(2);
/* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */
#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
@@ -906,20 +934,20 @@ struct ieee80211_rts {
__le16 duration;
u8 ra[6];
u8 ta[6];
-} __packed;
+} __packed __aligned(2);
struct ieee80211_cts {
__le16 frame_control;
__le16 duration;
u8 ra[6];
-} __packed;
+} __packed __aligned(2);
struct ieee80211_pspoll {
__le16 frame_control;
__le16 aid;
u8 bssid[6];
u8 ta[6];
-} __packed;
+} __packed __aligned(2);
/* TDLS */
@@ -1290,11 +1318,6 @@ struct ieee80211_vht_operation {
} __packed;
-#define IEEE80211_VHT_MCS_ZERO_TO_SEVEN_SUPPORT 0
-#define IEEE80211_VHT_MCS_ZERO_TO_EIGHT_SUPPORT 1
-#define IEEE80211_VHT_MCS_ZERO_TO_NINE_SUPPORT 2
-#define IEEE80211_VHT_MCS_NOT_SUPPORTED 3
-
/* 802.11ac VHT Capabilities */
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001
@@ -1310,10 +1333,11 @@ struct ieee80211_vht_operation {
#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200
#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
+#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
#define IEEE80211_VHT_CAP_BEAMFORMER_ANTENNAS_MAX 0x00006000
-#define IEEE80211_VHT_CAP_SOUNDING_DIMENTION_MAX 0x00030000
+#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MAX 0x00030000
#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000
#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000
#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 2b9f74b0ffea..428c37a1f95c 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -298,6 +298,7 @@ struct ucred {
#define SOL_IUCV 277
#define SOL_CAIF 278
#define SOL_ALG 279
+#define SOL_NFC 280
/* IPX options */
#define IPX_TYPE 1
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 22958d68ecfe..c64999fd1660 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -26,9 +26,9 @@ struct ssb_sprom_core_pwr_info {
struct ssb_sprom {
u8 revision;
- u8 il0mac[6]; /* MAC address for 802.11b/g */
- u8 et0mac[6]; /* MAC address for Ethernet */
- u8 et1mac[6]; /* MAC address for 802.11a */
+ u8 il0mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11b/g */
+ u8 et0mac[6] __aligned(sizeof(u16)); /* MAC address for Ethernet */
+ u8 et1mac[6] __aligned(sizeof(u16)); /* MAC address for 802.11a */
u8 et0phyaddr; /* MII address for enet0 */
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
@@ -340,13 +340,61 @@ enum ssb_bustype {
#define SSB_BOARDVENDOR_DELL 0x1028 /* Dell */
#define SSB_BOARDVENDOR_HP 0x0E11 /* HP */
/* board_type */
+#define SSB_BOARD_BCM94301CB 0x0406
+#define SSB_BOARD_BCM94301MP 0x0407
+#define SSB_BOARD_BU4309 0x040A
+#define SSB_BOARD_BCM94309CB 0x040B
+#define SSB_BOARD_BCM4309MP 0x040C
+#define SSB_BOARD_BU4306 0x0416
#define SSB_BOARD_BCM94306MP 0x0418
#define SSB_BOARD_BCM4309G 0x0421
#define SSB_BOARD_BCM4306CB 0x0417
-#define SSB_BOARD_BCM4309MP 0x040C
+#define SSB_BOARD_BCM94306PC 0x0425 /* pcmcia 3.3v 4306 card */
+#define SSB_BOARD_BCM94306CBSG 0x042B /* with SiGe PA */
+#define SSB_BOARD_PCSG94306 0x042D /* with SiGe PA */
+#define SSB_BOARD_BU4704SD 0x042E /* with sdram */
+#define SSB_BOARD_BCM94704AGR 0x042F /* dual 11a/11g Router */
+#define SSB_BOARD_BCM94308MP 0x0430 /* 11a-only minipci */
+#define SSB_BOARD_BU4318 0x0447
+#define SSB_BOARD_CB4318 0x0448
+#define SSB_BOARD_MPG4318 0x0449
#define SSB_BOARD_MP4318 0x044A
-#define SSB_BOARD_BU4306 0x0416
-#define SSB_BOARD_BU4309 0x040A
+#define SSB_BOARD_SD4318 0x044B
+#define SSB_BOARD_BCM94306P 0x044C /* with SiGe */
+#define SSB_BOARD_BCM94303MP 0x044E
+#define SSB_BOARD_BCM94306MPM 0x0450
+#define SSB_BOARD_BCM94306MPL 0x0453
+#define SSB_BOARD_PC4303 0x0454 /* pcmcia */
+#define SSB_BOARD_BCM94306MPLNA 0x0457
+#define SSB_BOARD_BCM94306MPH 0x045B
+#define SSB_BOARD_BCM94306PCIV 0x045C
+#define SSB_BOARD_BCM94318MPGH 0x0463
+#define SSB_BOARD_BU4311 0x0464
+#define SSB_BOARD_BCM94311MC 0x0465
+#define SSB_BOARD_BCM94311MCAG 0x0466
+/* 4321 boards */
+#define SSB_BOARD_BU4321 0x046B
+#define SSB_BOARD_BU4321E 0x047C
+#define SSB_BOARD_MP4321 0x046C
+#define SSB_BOARD_CB2_4321 0x046D
+#define SSB_BOARD_CB2_4321_AG 0x0066
+#define SSB_BOARD_MC4321 0x046E
+/* 4325 boards */
+#define SSB_BOARD_BCM94325DEVBU 0x0490
+#define SSB_BOARD_BCM94325BGABU 0x0491
+#define SSB_BOARD_BCM94325SDGWB 0x0492
+#define SSB_BOARD_BCM94325SDGMDL 0x04AA
+#define SSB_BOARD_BCM94325SDGMDL2 0x04C6
+#define SSB_BOARD_BCM94325SDGMDL3 0x04C9
+#define SSB_BOARD_BCM94325SDABGWBA 0x04E1
+/* 4322 boards */
+#define SSB_BOARD_BCM94322MC 0x04A4
+#define SSB_BOARD_BCM94322USB 0x04A8 /* dualband */
+#define SSB_BOARD_BCM94322HM 0x04B0
+#define SSB_BOARD_BCM94322USB2D 0x04Bf /* single band discrete front end */
+/* 4312 boards */
+#define SSB_BOARD_BU4312 0x048A
+#define SSB_BOARD_BCM4312MCGSG 0x04B5
/* chip_package */
#define SSB_CHIPPACK_BCM4712S 1 /* Small 200pin 4712 */
#define SSB_CHIPPACK_BCM4712M 2 /* Medium 225pin 4712 */
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 6ecfa02ddbac..3a7256955b10 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -289,11 +289,11 @@
#define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */
-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
+#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */
+#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0
+#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8
#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
#define SSB_SPROM4_AGAIN0_SHIFT 0
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 9531beee09b5..ed6e9552252e 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -232,7 +232,7 @@ struct bt_sock_list {
};
int bt_sock_register(int proto, const struct net_proto_family *ops);
-int bt_sock_unregister(int proto);
+void bt_sock_unregister(int proto);
void bt_sock_link(struct bt_sock_list *l, struct sock *s);
void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
int bt_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
@@ -260,12 +260,22 @@ struct l2cap_ctrl {
__u8 retries;
};
+struct hci_dev;
+
+typedef void (*hci_req_complete_t)(struct hci_dev *hdev, u8 status);
+
+struct hci_req_ctrl {
+ bool start;
+ hci_req_complete_t complete;
+};
+
struct bt_skb_cb {
__u8 pkt_type;
__u8 incoming;
__u16 expect;
__u8 force_active;
struct l2cap_ctrl control;
+ struct hci_req_ctrl req;
};
#define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 7f12c25f1fca..b3308927a0a1 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -119,10 +119,16 @@ enum {
HCI_CONNECTABLE,
HCI_DISCOVERABLE,
HCI_LINK_SECURITY,
- HCI_PENDING_CLASS,
HCI_PERIODIC_INQ,
+ HCI_FAST_CONNECTABLE,
};
+/* A mask for the flags that are supposed to remain when a reset happens
+ * or the HCI device is closed.
+ */
+#define HCI_PERSISTENT_MASK (BIT(HCI_LE_SCAN) | BIT(HCI_PERIODIC_INQ) | \
+ BIT(HCI_FAST_CONNECTABLE))
+
/* HCI ioctl defines */
#define HCIDEVUP _IOW('H', 201, int)
#define HCIDEVDOWN _IOW('H', 202, int)
@@ -881,12 +887,25 @@ struct hci_rp_read_data_block_size {
__le16 num_blocks;
} __packed;
+#define HCI_OP_READ_PAGE_SCAN_ACTIVITY 0x0c1b
+struct hci_rp_read_page_scan_activity {
+ __u8 status;
+ __le16 interval;
+ __le16 window;
+} __packed;
+
#define HCI_OP_WRITE_PAGE_SCAN_ACTIVITY 0x0c1c
struct hci_cp_write_page_scan_activity {
__le16 interval;
__le16 window;
} __packed;
+#define HCI_OP_READ_PAGE_SCAN_TYPE 0x0c46
+struct hci_rp_read_page_scan_type {
+ __u8 status;
+ __u8 type;
+} __packed;
+
#define HCI_OP_WRITE_PAGE_SCAN_TYPE 0x0c47
#define PAGE_SCAN_TYPE_STANDARD 0x00
#define PAGE_SCAN_TYPE_INTERLACED 0x01
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 90cf75afcb02..358a6983d3bb 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -165,6 +165,10 @@ struct hci_dev {
__u16 voice_setting;
__u8 io_capability;
__s8 inq_tx_power;
+ __u16 page_scan_interval;
+ __u16 page_scan_window;
+ __u8 page_scan_type;
+
__u16 devid_source;
__u16 devid_vendor;
__u16 devid_product;
@@ -248,8 +252,6 @@ struct hci_dev {
__u32 req_status;
__u32 req_result;
- __u16 init_last_cmd;
-
struct list_head mgmt_pending;
struct discovery_state discovery;
@@ -574,7 +576,7 @@ static inline struct hci_conn *hci_conn_hash_lookup_state(struct hci_dev *hdev,
return NULL;
}
-void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
+void hci_disconnect(struct hci_conn *conn, __u8 reason);
void hci_setup_sync(struct hci_conn *conn, __u16 handle);
void hci_sco_setup(struct hci_conn *conn, __u8 status);
@@ -742,8 +744,6 @@ int hci_add_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 *hash,
u8 *randomizer);
int hci_remove_remote_oob_data(struct hci_dev *hdev, bdaddr_t *bdaddr);
-int hci_update_ad(struct hci_dev *hdev);
-
void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb);
int hci_recv_frame(struct sk_buff *skb);
@@ -1041,6 +1041,22 @@ static inline u16 eir_append_data(u8 *eir, u16 eir_len, u8 type, u8 *data,
int hci_register_cb(struct hci_cb *hcb);
int hci_unregister_cb(struct hci_cb *hcb);
+struct hci_request {
+ struct hci_dev *hdev;
+ struct sk_buff_head cmd_q;
+
+ /* If something goes wrong when building the HCI request, the error
+ * value is stored in this field.
+ */
+ int err;
+};
+
+void hci_req_init(struct hci_request *req, struct hci_dev *hdev);
+int hci_req_run(struct hci_request *req, hci_req_complete_t complete);
+void hci_req_add(struct hci_request *req, u16 opcode, u32 plen, void *param);
+void hci_req_cmd_complete(struct hci_dev *hdev, u16 opcode, u8 status);
+void hci_req_cmd_status(struct hci_dev *hdev, u16 opcode, u8 status);
+
int hci_send_cmd(struct hci_dev *hdev, __u16 opcode, __u32 plen, void *param);
void hci_send_acl(struct hci_chan *chan, struct sk_buff *skb, __u16 flags);
void hci_send_sco(struct hci_conn *conn, struct sk_buff *skb);
@@ -1153,7 +1169,7 @@ struct hci_sec_filter {
#define hci_req_lock(d) mutex_lock(&d->req_lock)
#define hci_req_unlock(d) mutex_unlock(&d->req_lock)
-void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result);
+void hci_update_ad(struct hci_request *req);
void hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max,
u16 latency, u16 to_multiplier);
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index e2e3ecad1008..7afd4199d6b6 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -158,7 +158,6 @@ struct rfcomm_session {
struct timer_list timer;
unsigned long state;
unsigned long flags;
- atomic_t refcnt;
int initiator;
/* Default DLC parameters */
@@ -276,11 +275,6 @@ static inline void rfcomm_dlc_unthrottle(struct rfcomm_dlc *d)
void rfcomm_session_getaddr(struct rfcomm_session *s, bdaddr_t *src,
bdaddr_t *dst);
-static inline void rfcomm_session_hold(struct rfcomm_session *s)
-{
- atomic_inc(&s->refcnt);
-}
-
/* ---- RFCOMM sockets ---- */
struct sockaddr_rc {
sa_family_t rc_family;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d581c6de5d64..bdba9b619064 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -611,22 +611,10 @@ struct cfg80211_ap_settings {
};
/**
- * enum plink_action - actions to perform in mesh peers
- *
- * @PLINK_ACTION_INVALID: action 0 is reserved
- * @PLINK_ACTION_OPEN: start mesh peer link establishment
- * @PLINK_ACTION_BLOCK: block traffic from this mesh peer
- */
-enum plink_actions {
- PLINK_ACTION_INVALID,
- PLINK_ACTION_OPEN,
- PLINK_ACTION_BLOCK,
-};
-
-/**
* enum station_parameters_apply_mask - station parameter values to apply
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
+ * @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
@@ -634,6 +622,7 @@ enum plink_actions {
enum station_parameters_apply_mask {
STATION_PARAM_APPLY_UAPSD = BIT(0),
STATION_PARAM_APPLY_CAPABILITY = BIT(1),
+ STATION_PARAM_APPLY_PLINK_STATE = BIT(2),
};
/**
@@ -669,7 +658,7 @@ enum station_parameters_apply_mask {
* @ext_capab_len: number of extended capabilities
*/
struct station_parameters {
- u8 *supported_rates;
+ const u8 *supported_rates;
struct net_device *vlan;
u32 sta_flags_mask, sta_flags_set;
u32 sta_modify_mask;
@@ -678,17 +667,60 @@ struct station_parameters {
u8 supported_rates_len;
u8 plink_action;
u8 plink_state;
- struct ieee80211_ht_cap *ht_capa;
- struct ieee80211_vht_cap *vht_capa;
+ const struct ieee80211_ht_cap *ht_capa;
+ const struct ieee80211_vht_cap *vht_capa;
u8 uapsd_queues;
u8 max_sp;
enum nl80211_mesh_power_mode local_pm;
u16 capability;
- u8 *ext_capab;
+ const u8 *ext_capab;
u8 ext_capab_len;
};
/**
+ * enum cfg80211_station_type - the type of station being modified
+ * @CFG80211_STA_AP_CLIENT: client of an AP interface
+ * @CFG80211_STA_AP_MLME_CLIENT: client of an AP interface that has
+ * the AP MLME in the device
+ * @CFG80211_STA_AP_STA: AP station on managed interface
+ * @CFG80211_STA_IBSS: IBSS station
+ * @CFG80211_STA_TDLS_PEER_SETUP: TDLS peer on managed interface (dummy entry
+ * while TDLS setup is in progress, it moves out of this state when
+ * being marked authorized; use this only if TDLS with external setup is
+ * supported/used)
+ * @CFG80211_STA_TDLS_PEER_ACTIVE: TDLS peer on managed interface (active
+ * entry that is operating, has been marked authorized by userspace)
+ * @CFG80211_STA_MESH_PEER_KERNEL: peer on mesh interface (kernel managed)
+ * @CFG80211_STA_MESH_PEER_USER: peer on mesh interface (user managed)
+ */
+enum cfg80211_station_type {
+ CFG80211_STA_AP_CLIENT,
+ CFG80211_STA_AP_MLME_CLIENT,
+ CFG80211_STA_AP_STA,
+ CFG80211_STA_IBSS,
+ CFG80211_STA_TDLS_PEER_SETUP,
+ CFG80211_STA_TDLS_PEER_ACTIVE,
+ CFG80211_STA_MESH_PEER_KERNEL,
+ CFG80211_STA_MESH_PEER_USER,
+};
+
+/**
+ * cfg80211_check_station_change - validate parameter changes
+ * @wiphy: the wiphy this operates on
+ * @params: the new parameters for a station
+ * @statype: the type of station being modified
+ *
+ * Utility function for the @change_station driver method. Call this function
+ * with the appropriate station type looking up the station (and checking that
+ * it exists). It will verify whether the station change is acceptable, and if
+ * not will return an error code. Note that it may modify the parameters for
+ * backward compatibility reasons, so don't use them before calling this.
+ */
+int cfg80211_check_station_change(struct wiphy *wiphy,
+ struct station_parameters *params,
+ enum cfg80211_station_type statype);
+
+/**
* enum station_info_flags - station information flags
*
* Used by the driver to indicate which info in &struct station_info
@@ -1119,6 +1151,7 @@ struct mesh_config {
* @ie_len: length of vendor information elements
* @is_authenticated: this mesh requires authentication
* @is_secure: this mesh uses security
+ * @user_mpm: userspace handles all MPM functions
* @dtim_period: DTIM period to use
* @beacon_interval: beacon interval to use
* @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
@@ -1136,6 +1169,7 @@ struct mesh_setup {
u8 ie_len;
bool is_authenticated;
bool is_secure;
+ bool user_mpm;
u8 dtim_period;
u16 beacon_interval;
int mcast_rate[IEEE80211_NUM_BANDS];
@@ -1398,9 +1432,11 @@ struct cfg80211_auth_request {
* enum cfg80211_assoc_req_flags - Over-ride default behaviour in association.
*
* @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n)
+ * @ASSOC_REQ_DISABLE_VHT: Disable VHT
*/
enum cfg80211_assoc_req_flags {
ASSOC_REQ_DISABLE_HT = BIT(0),
+ ASSOC_REQ_DISABLE_VHT = BIT(1),
};
/**
@@ -1422,6 +1458,8 @@ enum cfg80211_assoc_req_flags {
* @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
* will be used in ht_capa. Un-supported values will be ignored.
* @ht_capa_mask: The bits of ht_capa which are to be used.
+ * @vht_capa: VHT capability override
+ * @vht_capa_mask: VHT capability mask indicating which fields to use
*/
struct cfg80211_assoc_request {
struct cfg80211_bss *bss;
@@ -1432,6 +1470,7 @@ struct cfg80211_assoc_request {
u32 flags;
struct ieee80211_ht_cap ht_capa;
struct ieee80211_ht_cap ht_capa_mask;
+ struct ieee80211_vht_cap vht_capa, vht_capa_mask;
};
/**
@@ -1542,6 +1581,8 @@ struct cfg80211_ibss_params {
* @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask
* will be used in ht_capa. Un-supported values will be ignored.
* @ht_capa_mask: The bits of ht_capa which are to be used.
+ * @vht_capa: VHT Capability overrides
+ * @vht_capa_mask: The bits of vht_capa which are to be used.
*/
struct cfg80211_connect_params {
struct ieee80211_channel *channel;
@@ -1560,6 +1601,8 @@ struct cfg80211_connect_params {
int bg_scan_period;
struct ieee80211_ht_cap ht_capa;
struct ieee80211_ht_cap ht_capa_mask;
+ struct ieee80211_vht_cap vht_capa;
+ struct ieee80211_vht_cap vht_capa_mask;
};
/**
@@ -1722,6 +1765,21 @@ struct cfg80211_gtk_rekey_data {
};
/**
+ * struct cfg80211_update_ft_ies_params - FT IE Information
+ *
+ * This structure provides information needed to update the fast transition IE
+ *
+ * @md: The Mobility Domain ID, 2 Octet value
+ * @ie: Fast Transition IEs
+ * @ie_len: Length of ft_ie in octets
+ */
+struct cfg80211_update_ft_ies_params {
+ u16 md;
+ const u8 *ie;
+ size_t ie_len;
+};
+
+/**
* struct cfg80211_ops - backend description for wireless configuration
*
* This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1781,9 +1839,8 @@ struct cfg80211_gtk_rekey_data {
* @change_station: Modify a given station. Note that flags changes are not much
* validated in cfg80211, in particular the auth/assoc/authorized flags
* might come to the driver in invalid combinations -- make sure to check
- * them, also against the existing state! Also, supported_rates changes are
- * not checked in station mode -- drivers need to reject (or ignore) them
- * for anything but TDLS peers.
+ * them, also against the existing state! Drivers must call
+ * cfg80211_check_station_change() to validate the information.
* @get_station: get station information for the station identified by @mac
* @dump_station: dump station callback -- resume dump at index @idx
*
@@ -2168,6 +2225,8 @@ struct cfg80211_ops {
int (*start_radar_detection)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_chan_def *chandef);
+ int (*update_ft_ies)(struct wiphy *wiphy, struct net_device *dev,
+ struct cfg80211_update_ft_ies_params *ftie);
};
/*
@@ -2485,6 +2544,8 @@ struct wiphy_wowlan_support {
* @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
* @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden.
* If null, then none can be over-ridden.
+ * @vht_capa_mod_mask: Specify what VHT capabilities can be over-ridden.
+ * If null, then none can be over-ridden.
*
* @max_acl_mac_addrs: Maximum number of MAC addresses that the device
* supports for ACL.
@@ -2593,6 +2654,7 @@ struct wiphy {
struct dentry *debugfsdir;
const struct ieee80211_ht_cap *ht_capa_mod_mask;
+ const struct ieee80211_vht_cap *vht_capa_mod_mask;
#ifdef CONFIG_NET_NS
/* the network namespace this phy lives in currently */
@@ -4002,6 +4064,30 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate);
void cfg80211_unregister_wdev(struct wireless_dev *wdev);
/**
+ * struct cfg80211_ft_event - FT Information Elements
+ * @ies: FT IEs
+ * @ies_len: length of the FT IE in bytes
+ * @target_ap: target AP's MAC address
+ * @ric_ies: RIC IE
+ * @ric_ies_len: length of the RIC IE in bytes
+ */
+struct cfg80211_ft_event_params {
+ const u8 *ies;
+ size_t ies_len;
+ const u8 *target_ap;
+ const u8 *ric_ies;
+ size_t ric_ies_len;
+};
+
+/**
+ * cfg80211_ft_event - notify userspace about FT IE and RIC IE
+ * @netdev: network device
+ * @ft_event: IE information
+ */
+void cfg80211_ft_event(struct net_device *netdev,
+ struct cfg80211_ft_event_params *ft_event);
+
+/**
* cfg80211_get_p2p_attr - find and copy a P2P attribute from IE buffer
* @ies: the input IE buffer
* @len: the input length
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index f7eba1300d82..dd73b8c6746b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -93,9 +93,11 @@ struct device;
* enum ieee80211_max_queues - maximum number of queues
*
* @IEEE80211_MAX_QUEUES: Maximum number of regular device queues.
+ * @IEEE80211_MAX_QUEUE_MAP: bitmap with maximum queues set
*/
enum ieee80211_max_queues {
IEEE80211_MAX_QUEUES = 16,
+ IEEE80211_MAX_QUEUE_MAP = BIT(IEEE80211_MAX_QUEUES) - 1,
};
#define IEEE80211_INVAL_HW_QUEUE 0xff
@@ -1067,6 +1069,9 @@ enum ieee80211_vif_flags {
* path needing to access it; even though the netdev carrier will always
* be off when it is %NULL there can still be races and packets could be
* processed after it switches back to %NULL.
+ * @debugfs_dir: debugfs dentry, can be used by drivers to create own per
+ * interface debug files. Note that it will be NULL for the virtual
+ * monitor interface (if that is requested.)
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *).
*/
@@ -1083,6 +1088,10 @@ struct ieee80211_vif {
u32 driver_flags;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *debugfs_dir;
+#endif
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -1101,8 +1110,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
* These flags are used for communication about keys between the driver
* and mac80211, with the @flags parameter of &struct ieee80211_key_conf.
*
- * @IEEE80211_KEY_FLAG_WMM_STA: Set by mac80211, this flag indicates
- * that the STA this key will be used with could be using QoS.
* @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
* driver to indicate that it requires IV generation for this
* particular key.
@@ -1127,7 +1134,6 @@ static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif)
* %IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
*/
enum ieee80211_key_flags {
- IEEE80211_KEY_FLAG_WMM_STA = 1<<0,
IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1,
IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
IEEE80211_KEY_FLAG_PAIRWISE = 1<<3,
@@ -1231,9 +1237,8 @@ enum ieee80211_sta_rx_bandwidth {
* @addr: MAC address
* @aid: AID we assigned to the station if we're an AP
* @supp_rates: Bitmap of supported rates (per band)
- * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
- * @vht_cap: VHT capabilities of this STA; Not restricting any capabilities
- * of remote STA. Taking as is.
+ * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
+ * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
* @wme: indicates whether the STA supports WME. Only valid during AP-mode.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *), size is determined in hw information.
@@ -1950,14 +1955,14 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
* filter those response frames except in the case of frames that
* are buffered in the driver -- those must remain buffered to avoid
* reordering. Because it is possible that no frames are released
- * in this case, the driver must call ieee80211_sta_eosp_irqsafe()
+ * in this case, the driver must call ieee80211_sta_eosp()
* to indicate to mac80211 that the service period ended anyway.
*
* Finally, if frames from multiple TIDs are released from mac80211
* but the driver might reorder them, it must clear & set the flags
* appropriately (only the last frame may have %IEEE80211_TX_STATUS_EOSP)
* and also take care of the EOSP and MORE_DATA bits in the frame.
- * The driver may also use ieee80211_sta_eosp_irqsafe() in this case.
+ * The driver may also use ieee80211_sta_eosp() in this case.
*/
/**
@@ -2135,6 +2140,24 @@ enum ieee80211_rate_control_changed {
};
/**
+ * enum ieee80211_roc_type - remain on channel type
+ *
+ * With the support for multi channel contexts and multi channel operations,
+ * remain on channel operations might be limited/deferred/aborted by other
+ * flows/operations which have higher priority (and vise versa).
+ * Specifying the ROC type can be used by devices to prioritize the ROC
+ * operations compared to other operations/flows.
+ *
+ * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
+ * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
+ * for sending managment frames offchannel.
+ */
+enum ieee80211_roc_type {
+ IEEE80211_ROC_TYPE_NORMAL = 0,
+ IEEE80211_ROC_TYPE_MGMT_TX,
+};
+
+/**
* struct ieee80211_ops - callbacks from mac80211 to the driver
*
* This structure contains various callbacks that the driver may
@@ -2212,18 +2235,6 @@ enum ieee80211_rate_control_changed {
* MAC address of the device going away.
* Hence, this callback must be implemented. It can sleep.
*
- * @add_interface_debugfs: Drivers can use this callback to add debugfs files
- * when a vif is added to mac80211. This callback and
- * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS
- * conditional. @remove_interface_debugfs must be provided for cleanup.
- * This callback can sleep.
- *
- * @remove_interface_debugfs: Remove the debugfs files which were added using
- * @add_interface_debugfs. This callback must remove all debugfs entries
- * that were added because mac80211 only removes interface debugfs when the
- * interface is destroyed, not when it is removed from the driver.
- * This callback can sleep.
- *
* @config: Handler for configuration requests. IEEE 802.11 code calls this
* function to change hardware configuration, e.g., channel.
* This function should never fail but returns a negative error code
@@ -2245,6 +2256,9 @@ enum ieee80211_rate_control_changed {
* See the section "Frame filtering" for more information.
* This callback must be implemented and can sleep.
*
+ * @set_multicast_list: Configure the device's interface specific RX multicast
+ * filter. This callback is optional. This callback must be atomic.
+ *
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
@@ -2426,8 +2440,11 @@ enum ieee80211_rate_control_changed {
* @testmode_dump: Implement a cfg80211 test mode dump. The callback can sleep.
*
* @flush: Flush all pending frames from the hardware queue, making sure
- * that the hardware queues are empty. If the parameter @drop is set
- * to %true, pending frames may be dropped. The callback can sleep.
+ * that the hardware queues are empty. The @queues parameter is a bitmap
+ * of queues to flush, which is useful if different virtual interfaces
+ * use different hardware queues; it may also indicate all queues.
+ * If the parameter @drop is set to %true, pending frames may be dropped.
+ * The callback can sleep.
*
* @channel_switch: Drivers that need (or want) to offload the channel
* switch operation for CSAs received from the AP may implement this
@@ -2492,7 +2509,7 @@ enum ieee80211_rate_control_changed {
* setting the EOSP flag in the QoS header of the frames. Also, when the
* service period ends, the driver must set %IEEE80211_TX_STATUS_EOSP
* on the last frame in the SP. Alternatively, it may call the function
- * ieee80211_sta_eosp_irqsafe() to inform mac80211 of the end of the SP.
+ * ieee80211_sta_eosp() to inform mac80211 of the end of the SP.
* This callback must be atomic.
* @allow_buffered_frames: Prepare device to allow the given number of frames
* to go out to the given station. The frames will be sent by mac80211
@@ -2503,7 +2520,7 @@ enum ieee80211_rate_control_changed {
* them between the TIDs, it must set the %IEEE80211_TX_STATUS_EOSP flag
* on the last frame and clear it on all others and also handle the EOSP
* bit in the QoS header correctly. Alternatively, it can also call the
- * ieee80211_sta_eosp_irqsafe() function.
+ * ieee80211_sta_eosp() function.
* The @tids parameter is a bitmap and tells the driver which TIDs the
* frames will be on; it will at most have two bits set.
* This callback must be atomic.
@@ -2591,6 +2608,10 @@ struct ieee80211_ops {
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
+ void (*set_multicast_list)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, bool allmulti,
+ struct netdev_hw_addr_list *mc_list);
+
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -2637,12 +2658,6 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
struct ieee80211_sta *sta,
struct dentry *dir);
- void (*add_interface_debugfs)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct dentry *dir);
- void (*remove_interface_debugfs)(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct dentry *dir);
#endif
void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
enum sta_notify_cmd, struct ieee80211_sta *sta);
@@ -2677,7 +2692,7 @@ struct ieee80211_ops {
struct netlink_callback *cb,
void *data, int len);
#endif
- void (*flush)(struct ieee80211_hw *hw, bool drop);
+ void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
void (*channel_switch)(struct ieee80211_hw *hw,
struct ieee80211_channel_switch *ch_switch);
int (*napi_poll)(struct ieee80211_hw *hw, int budget);
@@ -2687,7 +2702,8 @@ struct ieee80211_ops {
int (*remain_on_channel)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_channel *chan,
- int duration);
+ int duration,
+ enum ieee80211_roc_type type);
int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
int (*set_ringparam)(struct ieee80211_hw *hw, u32 tx, u32 rx);
void (*get_ringparam)(struct ieee80211_hw *hw,
@@ -3842,14 +3858,17 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
* %IEEE80211_TX_STATUS_EOSP bit and call this function instead.
* This applies for PS-Poll as well as uAPSD.
*
- * Note that there is no non-_irqsafe version right now as
- * it wasn't needed, but just like _tx_status() and _rx()
- * must not be mixed in irqsafe/non-irqsafe versions, this
- * function must not be mixed with those either. Use the
- * all irqsafe, or all non-irqsafe, don't mix! If you need
- * the non-irqsafe version of this, you need to add it.
+ * Note that just like with _tx_status() and _rx() drivers must
+ * not mix calls to irqsafe/non-irqsafe versions, this function
+ * must not be mixed with those either. Use the all irqsafe, or
+ * all non-irqsafe, don't mix!
+ *
+ * NB: the _irqsafe version of this function doesn't exist, no
+ * driver needs it right now. Don't call this function if
+ * you'd need the _irqsafe version, look at the git history
+ * and restore the _irqsafe version!
*/
-void ieee80211_sta_eosp_irqsafe(struct ieee80211_sta *pubsta);
+void ieee80211_sta_eosp(struct ieee80211_sta *pubsta);
/**
* ieee80211_iter_keys - iterate keys programmed into the device
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 7969f46f1bb3..7440bc81a04b 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -90,6 +90,8 @@ enum nfc_commands {
NFC_CMD_LLC_SET_PARAMS,
NFC_CMD_ENABLE_SE,
NFC_CMD_DISABLE_SE,
+ NFC_CMD_LLC_SDREQ,
+ NFC_EVENT_LLC_SDRES,
/* private: internal use only */
__NFC_CMD_AFTER_LAST
};
@@ -140,11 +142,21 @@ enum nfc_attrs {
NFC_ATTR_LLC_PARAM_RW,
NFC_ATTR_LLC_PARAM_MIUX,
NFC_ATTR_SE,
+ NFC_ATTR_LLC_SDP,
/* private: internal use only */
__NFC_ATTR_AFTER_LAST
};
#define NFC_ATTR_MAX (__NFC_ATTR_AFTER_LAST - 1)
+enum nfc_sdp_attr {
+ NFC_SDP_ATTR_UNSPEC,
+ NFC_SDP_ATTR_URI,
+ NFC_SDP_ATTR_SAP,
+/* private: internal use only */
+ __NFC_SDP_ATTR_AFTER_LAST
+};
+#define NFC_SDP_ATTR_MAX (__NFC_SDP_ATTR_AFTER_LAST - 1)
+
#define NFC_DEVICE_NAME_MAXSIZE 8
#define NFC_NFCID1_MAXSIZE 10
#define NFC_SENSB_RES_MAXSIZE 12
@@ -220,4 +232,8 @@ struct sockaddr_nfc_llcp {
#define NFC_LLCP_DIRECTION_RX 0x00
#define NFC_LLCP_DIRECTION_TX 0x01
+/* socket option names */
+#define NFC_LLCP_RW 0
+#define NFC_LLCP_MIUX 1
+
#endif /*__LINUX_NFC_H */
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index c46bb016f4e4..79da8710448e 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -36,7 +36,21 @@
* The station is still assumed to belong to the AP interface it was added
* to.
*
- * TODO: need more info?
+ * Station handling varies per interface type and depending on the driver's
+ * capabilities.
+ *
+ * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS
+ * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows:
+ * - a setup station entry is added, not yet authorized, without any rate
+ * or capability information, this just exists to avoid race conditions
+ * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid
+ * to add rate and capability information to the station and at the same
+ * time mark it authorized.
+ * - %NL80211_TDLS_ENABLE_LINK is then used
+ * - after this, the only valid operation is to remove it by tearing down
+ * the TDLS link (%NL80211_TDLS_DISABLE_LINK)
+ *
+ * TODO: need more info for other interface types
*/
/**
@@ -499,9 +513,11 @@
* @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a
* beacon or probe response from a compatible mesh peer. This is only
* sent while no station information (sta_info) exists for the new peer
- * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH is set. On
- * reception of this notification, userspace may decide to create a new
- * station (@NL80211_CMD_NEW_STATION). To stop this notification from
+ * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH,
+ * @NL80211_MESH_SETUP_USERSPACE_AMPE, or
+ * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this
+ * notification, userspace may decide to create a new station
+ * (@NL80211_CMD_NEW_STATION). To stop this notification from
* reoccurring, the userspace authentication daemon may want to create the
* new station with the AUTHENTICATED flag unset and maybe change it later
* depending on the authentication result.
@@ -611,6 +627,18 @@
* %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the
* event.
*
+ * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features,
+ * i.e. features for the nl80211 protocol rather than device features.
+ * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap.
+ *
+ * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition
+ * Information Element to the WLAN driver
+ *
+ * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver
+ * to the supplicant. This will carry the target AP's MAC address along
+ * with the relevant Information Elements. This event is used to report
+ * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE).
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -765,6 +793,11 @@ enum nl80211_commands {
NL80211_CMD_RADAR_DETECT,
+ NL80211_CMD_GET_PROTOCOL_FEATURES,
+
+ NL80211_CMD_UPDATE_FT_IES,
+ NL80211_CMD_FT_EVENT,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -884,7 +917,8 @@ enum nl80211_commands {
* consisting of a nested array.
*
* @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes).
- * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link.
+ * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link
+ * (see &enum nl80211_plink_action).
* @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path.
* @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path
* info given for %NL80211_CMD_GET_MPATH, nested attribute described at
@@ -1167,10 +1201,10 @@ enum nl80211_commands {
* @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver
* allows auth frames in a mesh to be passed to userspace for processing via
* the @NL80211_MESH_SETUP_USERSPACE_AUTH flag.
- * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as
- * defined in &enum nl80211_plink_state. Used when userspace is
- * driving the peer link management state machine.
- * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled.
+ * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in
+ * &enum nl80211_plink_state. Used when userspace is driving the peer link
+ * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or
+ * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled.
*
* @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy
* capabilities, the supported WoWLAN triggers
@@ -1368,6 +1402,18 @@ enum nl80211_commands {
* advertised to the driver, e.g., to enable TDLS off channel operations
* and PU-APSD.
*
+ * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see
+ * &enum nl80211_protocol_features, the attribute is a u32.
+ *
+ * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports
+ * receiving the data for a single wiphy split across multiple
+ * messages, given with wiphy dump message
+ *
+ * @NL80211_ATTR_MDID: Mobility Domain Identifier
+ *
+ * @NL80211_ATTR_IE_RIC: Resource Information Container Information
+ * Element
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1654,6 +1700,15 @@ enum nl80211_attrs {
NL80211_ATTR_STA_CAPABILITY,
NL80211_ATTR_STA_EXT_CAPABILITY,
+ NL80211_ATTR_PROTOCOL_FEATURES,
+ NL80211_ATTR_SPLIT_WIPHY_DUMP,
+
+ NL80211_ATTR_DISABLE_VHT,
+ NL80211_ATTR_VHT_CAPABILITY_MASK,
+
+ NL80211_ATTR_MDID,
+ NL80211_ATTR_IE_RIC,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2412,8 +2467,10 @@ enum nl80211_mesh_power_mode {
* @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh
* point.
*
- * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically
- * open peer links when we detect compatible mesh peers.
+ * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open
+ * peer links when we detect compatible mesh peers. Disabled if
+ * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are
+ * set.
*
* @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames
* containing a PREQ that an MP can send to a particular destination (path
@@ -2559,6 +2616,9 @@ enum nl80211_meshconf_params {
* vendor specific synchronization method or disable it to use the default
* neighbor offset synchronization
*
+ * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will
+ * implement an MPM which handles peer allocation and state.
+ *
* @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
*
* @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
@@ -2571,6 +2631,7 @@ enum nl80211_mesh_setup_params {
NL80211_MESH_SETUP_USERSPACE_AUTH,
NL80211_MESH_SETUP_USERSPACE_AMPE,
NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
+ NL80211_MESH_SETUP_USERSPACE_MPM,
/* keep last */
__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -3307,6 +3368,23 @@ enum nl80211_plink_state {
MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1
};
+/**
+ * enum nl80211_plink_action - actions to perform in mesh peers
+ *
+ * @NL80211_PLINK_ACTION_NO_ACTION: perform no action
+ * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment
+ * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer
+ * @NUM_NL80211_PLINK_ACTIONS: number of possible actions
+ */
+enum plink_actions {
+ NL80211_PLINK_ACTION_NO_ACTION,
+ NL80211_PLINK_ACTION_OPEN,
+ NL80211_PLINK_ACTION_BLOCK,
+
+ NUM_NL80211_PLINK_ACTIONS,
+};
+
+
#define NL80211_KCK_LEN 16
#define NL80211_KEK_LEN 16
#define NL80211_REPLAY_CTR_LEN 8
@@ -3456,6 +3534,10 @@ enum nl80211_ap_sme_features {
* stations the authenticated/associated bits have to be set in the mask.
* @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits
* (HT40, VHT 80/160 MHz) if this flag is set
+ * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh
+ * Peering Management entity which may be implemented by registering for
+ * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
+ * still generated by the driver.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
@@ -3474,6 +3556,7 @@ enum nl80211_feature_flags {
/* bit 13 is reserved */
NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14,
NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15,
+ NL80211_FEATURE_USERSPACE_MPM = 1 << 16,
};
/**
@@ -3587,4 +3670,16 @@ enum nl80211_dfs_state {
NL80211_DFS_AVAILABLE,
};
+/**
+ * enum enum nl80211_protocol_features - nl80211 protocol features
+ * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting
+ * wiphy dumps (if requested by the application with the attribute
+ * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the
+ * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or
+ * %NL80211_ATTR_WDEV.
+ */
+enum nl80211_protocol_features {
+ NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0,
+};
+
#endif /* __LINUX_NL80211_H */
OpenPOWER on IntegriCloud