summaryrefslogtreecommitdiffstats
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/ieee80211.h1
-rw-r--r--include/linux/ssb/ssb_driver_mips.h15
-rw-r--r--include/net/cfg80211.h115
-rw-r--r--include/net/mac80211.h11
-rw-r--r--include/net/nfc/hci.h7
-rw-r--r--include/net/nfc/nci_core.h58
-rw-r--r--include/net/nfc/nfc.h35
-rw-r--r--include/uapi/linux/nfc.h18
-rw-r--r--include/uapi/linux/nl80211.h9
9 files changed, 191 insertions, 78 deletions
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index d826e5a84af0..b0dc87a2a376 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -146,6 +146,7 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
#define IEEE80211_MAX_RTS_THRESHOLD 2353
#define IEEE80211_MAX_AID 2007
#define IEEE80211_MAX_TIM_LEN 251
+#define IEEE80211_MAX_MESH_PEERINGS 63
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
6.2.1.1.2.
diff --git a/include/linux/ssb/ssb_driver_mips.h b/include/linux/ssb/ssb_driver_mips.h
index afe79d40a99e..6535e4718fde 100644
--- a/include/linux/ssb/ssb_driver_mips.h
+++ b/include/linux/ssb/ssb_driver_mips.h
@@ -20,6 +20,18 @@ struct ssb_pflash {
u32 window_size;
};
+#ifdef CONFIG_SSB_SFLASH
+struct ssb_sflash {
+ bool present;
+ u32 window;
+ u32 blocksize;
+ u16 numblocks;
+ u32 size;
+
+ void *priv;
+};
+#endif
+
struct ssb_mipscore {
struct ssb_device *dev;
@@ -27,6 +39,9 @@ struct ssb_mipscore {
struct ssb_serial_port serial_ports[4];
struct ssb_pflash pflash;
+#ifdef CONFIG_SSB_SFLASH
+ struct ssb_sflash sflash;
+#endif
};
extern void ssb_mipscore_init(struct ssb_mipscore *mcore);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 6dd19593e333..6a43c34ce96f 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1124,6 +1124,9 @@ struct bss_parameters {
* setting for new peer links.
* @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake
* after transmitting its beacon.
+ * @plink_timeout: If no tx activity is seen from a STA we've established
+ * peering with for longer than this time (in seconds), then remove it
+ * from the STA's list of peers. Default is 30 minutes.
*/
struct mesh_config {
u16 dot11MeshRetryTimeout;
@@ -1153,6 +1156,7 @@ struct mesh_config {
u16 dot11MeshHWMPconfirmationInterval;
enum nl80211_mesh_power_mode power_mode;
u16 dot11MeshAwakeWindowDuration;
+ u32 plink_timeout;
};
/**
@@ -1172,6 +1176,7 @@ struct mesh_config {
* @dtim_period: DTIM period to use
* @beacon_interval: beacon interval to use
* @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a]
+ * @basic_rates: basic rates to use when creating the mesh
*
* These parameters are fixed when the mesh is created.
*/
@@ -1191,6 +1196,7 @@ struct mesh_setup {
u8 dtim_period;
u16 beacon_interval;
int mcast_rate[IEEE80211_NUM_BANDS];
+ u32 basic_rates;
};
/**
@@ -2654,7 +2660,7 @@ struct wiphy {
u32 hw_version;
#ifdef CONFIG_PM
- struct wiphy_wowlan_support wowlan;
+ const struct wiphy_wowlan_support *wowlan;
struct cfg80211_wowlan *wowlan_config;
#endif
@@ -2853,7 +2859,7 @@ struct cfg80211_cached_keys;
* @current_bss: (private) Used by the internal configuration code
* @channel: (private) Used by the internal configuration code to track
* the user-set AP, monitor and WDS channel
- * @preset_chan: (private) Used by the internal configuration code to
+ * @preset_chandef: (private) Used by the internal configuration code to
* track the channel to be used for AP later
* @bssid: (private) Used by the internal configuration code
* @ssid: (private) Used by the internal configuration code
@@ -2875,6 +2881,15 @@ struct cfg80211_cached_keys;
* @p2p_started: true if this is a P2P Device that has been started
* @cac_started: true if DFS channel availability check has been started
* @cac_start_time: timestamp (jiffies) when the dfs state was entered.
+ * @ps: powersave mode is enabled
+ * @ps_timeout: dynamic powersave timeout
+ * @ap_unexpected_nlportid: (private) netlink port ID of application
+ * registered for unexpected class 3 frames (AP mode)
+ * @conn: (private) cfg80211 software SME connection state machine data
+ * @connect_keys: (private) keys to set after connection is established
+ * @ibss_fixed: (private) IBSS is using fixed BSSID
+ * @event_list: (private) list for internal event processing
+ * @event_lock: (private) lock for event list
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -2898,11 +2913,6 @@ struct wireless_dev {
/* currently used for IBSS and SME - might be rearranged later */
u8 ssid[IEEE80211_MAX_SSID_LEN];
u8 ssid_len, mesh_id_len, mesh_id_up_len;
- enum {
- CFG80211_SME_IDLE,
- CFG80211_SME_CONNECTING,
- CFG80211_SME_CONNECTED,
- } sme_state;
struct cfg80211_conn *conn;
struct cfg80211_cached_keys *connect_keys;
@@ -3432,59 +3442,66 @@ void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss);
/**
- * cfg80211_send_rx_auth - notification of processed authentication
+ * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame
* @dev: network device
* @buf: authentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever an authentication has been processed in
- * station mode. The driver is required to call either this function or
- * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth()
- * call. This function may sleep. The caller must hold the corresponding wdev's
- * mutex.
+ * This function is called whenever an authentication, disassociation or
+ * deauthentication frame has been received and processed in station mode.
+ * After being asked to authenticate via cfg80211_ops::auth() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ * After being asked to associate via cfg80211_ops::assoc() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ * While connected, the driver must calls this for received and processed
+ * disassociation and deauthentication frames. If the frame couldn't be used
+ * because it was unprotected, the driver must call the function
+ * cfg80211_rx_unprot_mlme_mgmt() instead.
+ *
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len);
+void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_auth_timeout - notification of timed out authentication
+ * cfg80211_auth_timeout - notification of timed out authentication
* @dev: network device
* @addr: The MAC address of the device with which the authentication timed out
*
* This function may sleep. The caller must hold the corresponding wdev's
* mutex.
*/
-void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr);
+void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr);
/**
- * cfg80211_send_rx_assoc - notification of processed association
+ * cfg80211_rx_assoc_resp - notification of processed association response
* @dev: network device
- * @bss: the BSS struct association was requested for, the struct reference
- * is owned by cfg80211 after this call
- * @buf: (re)association response frame (header + body)
+ * @bss: the BSS that association was requested with, ownership of the pointer
+ * moves to cfg80211 in this call
+ * @buf: authentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever a (re)association response has been
- * processed in station mode. The driver is required to call either this
- * function or cfg80211_send_assoc_timeout() to indicate the result of
- * cfg80211_ops::assoc() call. This function may sleep. The caller must hold
- * the corresponding wdev's mutex.
+ * After being asked to associate via cfg80211_ops::assoc() the driver must
+ * call either this function or cfg80211_auth_timeout().
+ *
+ * This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss,
+void cfg80211_rx_assoc_resp(struct net_device *dev,
+ struct cfg80211_bss *bss,
const u8 *buf, size_t len);
/**
- * cfg80211_send_assoc_timeout - notification of timed out association
+ * cfg80211_assoc_timeout - notification of timed out association
* @dev: network device
* @addr: The MAC address of the device with which the association timed out
*
* This function may sleep. The caller must hold the corresponding wdev's mutex.
*/
-void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
+void cfg80211_assoc_timeout(struct net_device *dev, const u8 *addr);
/**
- * cfg80211_send_deauth - notification of processed deauthentication
+ * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame
* @dev: network device
- * @buf: deauthentication frame (header + body)
+ * @buf: 802.11 frame (header + body)
* @len: length of the frame data
*
* This function is called whenever deauthentication has been processed in
@@ -3492,46 +3509,20 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr);
* locally generated ones. This function may sleep. The caller must hold the
* corresponding wdev's mutex.
*/
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
-
-/**
- * cfg80211_send_disassoc - notification of processed disassociation
- * @dev: network device
- * @buf: disassociation response frame (header + body)
- * @len: length of the frame data
- *
- * This function is called whenever disassociation has been processed in
- * station mode. This includes both received disassociation frames and locally
- * generated ones. This function may sleep. The caller must hold the
- * corresponding wdev's mutex.
- */
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len);
/**
- * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
+ * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame
* @dev: network device
* @buf: deauthentication frame (header + body)
* @len: length of the frame data
*
- * This function is called whenever a received Deauthentication frame has been
- * dropped in station mode because of MFP being used but the Deauthentication
- * frame was not protected. This function may sleep.
- */
-void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
- size_t len);
-
-/**
- * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
- * @dev: network device
- * @buf: disassociation frame (header + body)
- * @len: length of the frame data
- *
- * This function is called whenever a received Disassociation frame has been
- * dropped in station mode because of MFP being used but the Disassociation
+ * This function is called whenever a received deauthentication or dissassoc
+ * frame has been dropped in station mode because of MFP being used but the
* frame was not protected. This function may sleep.
*/
-void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
- size_t len);
+void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev,
+ const u8 *buf, size_t len);
/**
* cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 1f0014bd4d87..a405a7a9775c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -217,8 +217,8 @@ struct ieee80211_chanctx_conf {
* @BSS_CHANGED_TXPOWER: TX power setting changed for this interface
* @BSS_CHANGED_P2P_PS: P2P powersave settings (CTWindow, opportunistic PS)
* changed (currently only in P2P client mode, GO mode will be later)
- * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when
- * it becomes valid, managed mode only)
+ * @BSS_CHANGED_BEACON_INFO: Data from the AP's beacon became available:
+ * currently dtim_period only is under consideration.
* @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed,
* note that this is only called when it changes after the channel
* context had been assigned.
@@ -244,7 +244,7 @@ enum ieee80211_bss_change {
BSS_CHANGED_PS = 1<<17,
BSS_CHANGED_TXPOWER = 1<<18,
BSS_CHANGED_P2P_PS = 1<<19,
- BSS_CHANGED_DTIM_PERIOD = 1<<20,
+ BSS_CHANGED_BEACON_INFO = 1<<20,
BSS_CHANGED_BANDWIDTH = 1<<21,
/* when adding here, make sure to change ieee80211_reconfig */
@@ -288,7 +288,7 @@ enum ieee80211_rssi_event {
* IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE hardware flag
* @dtim_period: num of beacons before the next DTIM, for beaconing,
* valid in station mode only if after the driver was notified
- * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then.
+ * with the %BSS_CHANGED_BEACON_INFO flag, will be non-zero then.
* @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
* as it may have been received during scanning long ago). If the
* HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can
@@ -460,6 +460,8 @@ struct ieee80211_bss_conf {
* @IEEE80211_TX_CTL_DONTFRAG: Don't fragment this packet even if it
* would be fragmented by size (this is optional, only used for
* monitor injection).
+ * @IEEE80211_TX_CTL_PS_RESPONSE: This frame is a response to a poll
+ * frame (PS-Poll or uAPSD).
*
* Note: If you have to add new flags to the enumeration, then don't
* forget to update %IEEE80211_TX_TEMPORARY_FLAGS when necessary.
@@ -495,6 +497,7 @@ enum mac80211_tx_control_flags {
IEEE80211_TX_STATUS_EOSP = BIT(28),
IEEE80211_TX_CTL_USE_MINRATE = BIT(29),
IEEE80211_TX_CTL_DONTFRAG = BIT(30),
+ IEEE80211_TX_CTL_PS_RESPONSE = BIT(31),
};
#define IEEE80211_TX_CTL_STBC_SHIFT 23
diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h
index b87a1692b086..0af851c3b038 100644
--- a/include/net/nfc/hci.h
+++ b/include/net/nfc/hci.h
@@ -59,8 +59,10 @@ struct nfc_hci_ops {
struct nfc_target *target);
int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event,
struct sk_buff *skb);
- int (*enable_se)(struct nfc_dev *dev, u32 secure_element);
- int (*disable_se)(struct nfc_dev *dev, u32 secure_element);
+ int (*fw_upload)(struct nfc_hci_dev *hdev, const char *firmware_name);
+ int (*discover_se)(struct nfc_hci_dev *dev);
+ int (*enable_se)(struct nfc_hci_dev *dev, u32 se_idx);
+ int (*disable_se)(struct nfc_hci_dev *dev, u32 se_idx);
};
/* Pipes */
@@ -152,7 +154,6 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops,
struct nfc_hci_init_data *init_data,
unsigned long quirks,
u32 protocols,
- u32 supported_se,
const char *llc_name,
int tx_headroom,
int tx_tailroom,
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 5bc0c460edc0..99fc1f3a392a 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -3,6 +3,7 @@
* NFC Controller (NFCC) and a Device Host (DH).
*
* Copyright (C) 2011 Texas Instruments, Inc.
+ * Copyright (C) 2013 Intel Corporation. All rights reserved.
*
* Written by Ilan Elias <ilane@ti.com>
*
@@ -66,7 +67,7 @@ struct nci_dev;
struct nci_ops {
int (*open)(struct nci_dev *ndev);
int (*close)(struct nci_dev *ndev);
- int (*send)(struct sk_buff *skb);
+ int (*send)(struct nci_dev *ndev, struct sk_buff *skb);
};
#define NCI_MAX_SUPPORTED_RF_INTERFACES 4
@@ -147,13 +148,12 @@ struct nci_dev {
/* ----- NCI Devices ----- */
struct nci_dev *nci_allocate_device(struct nci_ops *ops,
__u32 supported_protocols,
- __u32 supported_se,
int tx_headroom,
int tx_tailroom);
void nci_free_device(struct nci_dev *ndev);
int nci_register_device(struct nci_dev *ndev);
void nci_unregister_device(struct nci_dev *ndev);
-int nci_recv_frame(struct sk_buff *skb);
+int nci_recv_frame(struct nci_dev *ndev, struct sk_buff *skb);
static inline struct sk_buff *nci_skb_alloc(struct nci_dev *ndev,
unsigned int len,
@@ -202,4 +202,56 @@ void nci_req_complete(struct nci_dev *ndev, int result);
/* ----- NCI status code ----- */
int nci_to_errno(__u8 code);
+/* ----- NCI over SPI acknowledge modes ----- */
+#define NCI_SPI_CRC_DISABLED 0x00
+#define NCI_SPI_CRC_ENABLED 0x01
+
+/* ----- NCI SPI structures ----- */
+struct nci_spi_dev;
+
+struct nci_spi_ops {
+ int (*open)(struct nci_spi_dev *ndev);
+ int (*close)(struct nci_spi_dev *ndev);
+ void (*assert_int)(struct nci_spi_dev *ndev);
+ void (*deassert_int)(struct nci_spi_dev *ndev);
+};
+
+struct nci_spi_dev {
+ struct nci_dev *nci_dev;
+ struct spi_device *spi;
+ struct nci_spi_ops *ops;
+
+ unsigned int xfer_udelay; /* microseconds delay between
+ transactions */
+ u8 acknowledge_mode;
+
+ struct completion req_completion;
+ u8 req_result;
+
+ void *driver_data;
+};
+
+/* ----- NCI SPI Devices ----- */
+struct nci_spi_dev *nci_spi_allocate_device(struct spi_device *spi,
+ struct nci_spi_ops *ops,
+ u32 supported_protocols,
+ u32 supported_se,
+ u8 acknowledge_mode,
+ unsigned int delay);
+void nci_spi_free_device(struct nci_spi_dev *ndev);
+int nci_spi_register_device(struct nci_spi_dev *ndev);
+void nci_spi_unregister_device(struct nci_spi_dev *ndev);
+int nci_spi_recv_frame(struct nci_spi_dev *ndev);
+
+static inline void nci_spi_set_drvdata(struct nci_spi_dev *ndev,
+ void *data)
+{
+ ndev->driver_data = data;
+}
+
+static inline void *nci_spi_get_drvdata(struct nci_spi_dev *ndev)
+{
+ return ndev->driver_data;
+}
+
#endif /* __NCI_CORE_H */
diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h
index 5eb80bb3cbb2..0e353f1658bb 100644
--- a/include/net/nfc/nfc.h
+++ b/include/net/nfc/nfc.h
@@ -68,8 +68,12 @@ struct nfc_ops {
void *cb_context);
int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb);
int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target);
- int (*enable_se)(struct nfc_dev *dev, u32 secure_element);
- int (*disable_se)(struct nfc_dev *dev, u32 secure_element);
+ int (*fw_upload)(struct nfc_dev *dev, const char *firmware_name);
+
+ /* Secure Element API */
+ int (*discover_se)(struct nfc_dev *dev);
+ int (*enable_se)(struct nfc_dev *dev, u32 se_idx);
+ int (*disable_se)(struct nfc_dev *dev, u32 se_idx);
};
#define NFC_TARGET_IDX_ANY -1
@@ -83,6 +87,8 @@ struct nfc_target {
u8 sel_res;
u8 nfcid1_len;
u8 nfcid1[NFC_NFCID1_MAXSIZE];
+ u8 nfcid2_len;
+ u8 nfcid2[NFC_NFCID2_MAXSIZE];
u8 sensb_res_len;
u8 sensb_res[NFC_SENSB_RES_MAXSIZE];
u8 sensf_res_len;
@@ -91,6 +97,23 @@ struct nfc_target {
u8 logical_idx;
};
+/**
+ * nfc_se - A structure for NFC accessible secure elements.
+ *
+ * @idx: The secure element index. User space will enable or
+ * disable a secure element by its index.
+ * @type: The secure element type. It can be SE_UICC or
+ * SE_EMBEDDED.
+ * @state: The secure element state, either enabled or disabled.
+ *
+ */
+struct nfc_se {
+ struct list_head list;
+ u32 idx;
+ u16 type;
+ u16 state;
+};
+
struct nfc_genl_data {
u32 poll_req_portid;
struct mutex genl_data_mutex;
@@ -104,6 +127,7 @@ struct nfc_dev {
int targets_generation;
struct device dev;
bool dev_up;
+ bool fw_upload_in_progress;
u8 rf_mode;
bool polling;
struct nfc_target *active_target;
@@ -111,8 +135,7 @@ struct nfc_dev {
struct nfc_genl_data genl_data;
u32 supported_protocols;
- u32 supported_se;
- u32 active_se;
+ struct list_head secure_elements;
int tx_headroom;
int tx_tailroom;
@@ -132,7 +155,6 @@ extern struct class nfc_class;
struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops,
u32 supported_protocols,
- u32 supported_se,
int tx_headroom,
int tx_tailroom);
@@ -216,4 +238,7 @@ int nfc_tm_data_received(struct nfc_dev *dev, struct sk_buff *skb);
void nfc_driver_failure(struct nfc_dev *dev, int err);
+int nfc_add_se(struct nfc_dev *dev, u32 se_idx, u16 type);
+int nfc_remove_se(struct nfc_dev *dev, u32 se_idx);
+
#endif /* __NET_NFC_H */
diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h
index 7c6f627a717d..caed0f324d5f 100644
--- a/include/uapi/linux/nfc.h
+++ b/include/uapi/linux/nfc.h
@@ -69,6 +69,8 @@
* starting a poll from a device which has a secure element enabled means
* we want to do SE based card emulation.
* @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element.
+ * @NFC_CMD_FW_UPLOAD: Request to Load/flash firmware, or event to inform that
+ * some firmware was loaded
*/
enum nfc_commands {
NFC_CMD_UNSPEC,
@@ -92,6 +94,9 @@ enum nfc_commands {
NFC_CMD_DISABLE_SE,
NFC_CMD_LLC_SDREQ,
NFC_EVENT_LLC_SDRES,
+ NFC_CMD_FW_UPLOAD,
+ NFC_EVENT_SE_ADDED,
+ NFC_EVENT_SE_REMOVED,
/* private: internal use only */
__NFC_CMD_AFTER_LAST
};
@@ -121,6 +126,9 @@ enum nfc_commands {
* @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter
* @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter
* @NFC_ATTR_SE: Available Secure Elements
+ * @NFC_ATTR_FIRMWARE_NAME: Free format firmware version
+ * @NFC_ATTR_SE_INDEX: Secure element index
+ * @NFC_ATTR_SE_TYPE: Secure element type (UICC or EMBEDDED)
*/
enum nfc_attrs {
NFC_ATTR_UNSPEC,
@@ -143,6 +151,9 @@ enum nfc_attrs {
NFC_ATTR_LLC_PARAM_MIUX,
NFC_ATTR_SE,
NFC_ATTR_LLC_SDP,
+ NFC_ATTR_FIRMWARE_NAME,
+ NFC_ATTR_SE_INDEX,
+ NFC_ATTR_SE_TYPE,
/* private: internal use only */
__NFC_ATTR_AFTER_LAST
};
@@ -159,9 +170,12 @@ enum nfc_sdp_attr {
#define NFC_DEVICE_NAME_MAXSIZE 8
#define NFC_NFCID1_MAXSIZE 10
+#define NFC_NFCID2_MAXSIZE 8
+#define NFC_NFCID3_MAXSIZE 10
#define NFC_SENSB_RES_MAXSIZE 12
#define NFC_SENSF_RES_MAXSIZE 18
#define NFC_GB_MAXSIZE 48
+#define NFC_FIRMWARE_NAME_MAXSIZE 32
/* NFC protocols */
#define NFC_PROTO_JEWEL 1
@@ -191,10 +205,12 @@ enum nfc_sdp_attr {
#define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B)
/* NFC Secure Elements */
-#define NFC_SE_NONE 0x0
#define NFC_SE_UICC 0x1
#define NFC_SE_EMBEDDED 0x2
+#define NFC_SE_DISABLED 0x0
+#define NFC_SE_ENABLED 0x1
+
struct sockaddr_nfc {
sa_family_t sa_family;
__u32 dev_idx;
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 5920715278c2..ca6facf4df0c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2577,6 +2577,10 @@ enum nl80211_mesh_power_mode {
*
* @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs)
*
+ * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
+ * established peering with for longer than this time (in seconds), then
+ * remove it from the STA's list of peers. Default is 30 minutes.
+ *
* @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
*/
enum nl80211_meshconf_params {
@@ -2608,6 +2612,7 @@ enum nl80211_meshconf_params {
NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL,
NL80211_MESHCONF_POWER_MODE,
NL80211_MESHCONF_AWAKE_WINDOW,
+ NL80211_MESHCONF_PLINK_TIMEOUT,
/* keep last */
__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -3579,6 +3584,10 @@ enum nl80211_ap_sme_features {
* Peering Management entity which may be implemented by registering for
* beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is
* still generated by the driver.
+ * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor
+ * interface. An active monitor interface behaves like a normal monitor
+ * interface, but gets added to the driver. It ensures that incoming
+ * unicast packets directed at the configured interface address get ACKed.
*/
enum nl80211_feature_flags {
NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
OpenPOWER on IntegriCloud