diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/lp8727.h | 18 | ||||
| -rw-r--r-- | include/linux/mfd/abx500.h | 273 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ab8500-bm.h | 474 | ||||
| -rw-r--r-- | include/linux/mfd/abx500/ux500_chargalg.h | 38 | ||||
| -rw-r--r-- | include/linux/power/max17042_battery.h | 93 | ||||
| -rw-r--r-- | include/linux/power/smb347-charger.h | 117 |
6 files changed, 1002 insertions, 11 deletions
diff --git a/include/linux/lp8727.h b/include/linux/lp8727.h index d21fa2865bf4..ea98c6133d32 100644 --- a/include/linux/lp8727.h +++ b/include/linux/lp8727.h @@ -1,4 +1,7 @@ /* + * LP8727 Micro/Mini USB IC with integrated charger + * + * Copyright (C) 2011 Texas Instruments * Copyright (C) 2011 National Semiconductor * * This program is free software; you can redistribute it and/or modify @@ -32,13 +35,24 @@ enum lp8727_ichg { ICHG_1000mA, }; +/** + * struct lp8727_chg_param + * @eoc_level : end of charge level setting + * @ichg : charging current + */ struct lp8727_chg_param { - /* end of charge level setting */ enum lp8727_eoc_level eoc_level; - /* charging current */ enum lp8727_ichg ichg; }; +/** + * struct lp8727_platform_data + * @get_batt_present : check battery status - exists or not + * @get_batt_level : get battery voltage (mV) + * @get_batt_capacity : get battery capacity (%) + * @get_batt_temp : get battery temperature + * @ac, @usb : charging parameters each charger type + */ struct lp8727_platform_data { u8 (*get_batt_present)(void); u16 (*get_batt_level)(void); diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h index 5fa697477b71..ee96cd51d8b2 100644 --- a/include/linux/mfd/abx500.h +++ b/include/linux/mfd/abx500.h @@ -146,6 +146,279 @@ struct abx500_init_settings { u8 setting; }; +/* Battery driver related data */ +/* + * ADC for the battery thermistor. + * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined + * with a NTC resistor to both identify the battery and to measure its + * temperature. Different phone manufactures uses different techniques to both + * identify the battery and to read its temperature. + */ +enum abx500_adc_therm { + ABx500_ADC_THERM_BATCTRL, + ABx500_ADC_THERM_BATTEMP, +}; + +/** + * struct abx500_res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct abx500_res_to_temp { + int temp; + int resist; +}; + +/** + * struct abx500_v_to_cap - Table for translating voltage to capacity + * @voltage: Voltage in mV + * @capacity: Capacity in percent + */ +struct abx500_v_to_cap { + int voltage; + int capacity; +}; + +/* Forward declaration */ +struct abx500_fg; + +/** + * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @overbat_threshold: Over battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct abx500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int overbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct abx500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct abx500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct abx500_battery_type - different batteries supported + * @name: battery technology + * @resis_high: battery upper resistance limit + * @resis_low: battery lower resistance limit + * @charge_full_design: Maximum battery capacity in mAh + * @nominal_voltage: Nominal voltage of the battery in mV + * @termination_vol: max voltage upto which battery can be charged + * @termination_curr battery charging termination current in mA + * @recharge_vol battery voltage limit that will trigger a new + * full charging cycle in the case where maintenan- + * -ce charging has been disabled + * @normal_cur_lvl: charger current in normal state in mA + * @normal_vol_lvl: charger voltage in normal state in mV + * @maint_a_cur_lvl: charger current in maintenance A state in mA + * @maint_a_vol_lvl: charger voltage in maintenance A state in mV + * @maint_a_chg_timer_h: charge time in maintenance A state + * @maint_b_cur_lvl: charger current in maintenance B state in mA + * @maint_b_vol_lvl: charger voltage in maintenance B state in mV + * @maint_b_chg_timer_h: charge time in maintenance B state + * @low_high_cur_lvl: charger current in temp low/high state in mA + * @low_high_vol_lvl: charger voltage in temp low/high state in mV' + * @battery_resistance: battery inner resistance in mOhm. + * @n_r_t_tbl_elements: number of elements in r_to_t_tbl + * @r_to_t_tbl: table containing resistance to temp points + * @n_v_cap_tbl_elements: number of elements in v_to_cap_tbl + * @v_to_cap_tbl: Voltage to capacity (in %) table + * @n_batres_tbl_elements number of elements in the batres_tbl + * @batres_tbl battery internal resistance vs temperature table + */ +struct abx500_battery_type { + int name; + int resis_high; + int resis_low; + int charge_full_design; + int nominal_voltage; + int termination_vol; + int termination_curr; + int recharge_vol; + int normal_cur_lvl; + int normal_vol_lvl; + int maint_a_cur_lvl; + int maint_a_vol_lvl; + int maint_a_chg_timer_h; + int maint_b_cur_lvl; + int maint_b_vol_lvl; + int maint_b_chg_timer_h; + int low_high_cur_lvl; + int low_high_vol_lvl; + int battery_resistance; + int n_temp_tbl_elements; + struct abx500_res_to_temp *r_to_t_tbl; + int n_v_cap_tbl_elements; + struct abx500_v_to_cap *v_to_cap_tbl; + int n_batres_tbl_elements; + struct batres_vs_temp *batres_tbl; +}; + +/** + * struct abx500_bm_capacity_levels - abx500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct abx500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct abx500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct abx500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct abx500_bm_data - abx500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_now present battery temperature + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @abx500_adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @auto_trig flag to enable auto adc trigger + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct abx500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_now; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + bool auto_trig; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct abx500_maxim_parameters *maxi; + const struct abx500_bm_capacity_levels *cap_levels; + const struct abx500_battery_type *bat_type; + const struct abx500_bm_charger_parameters *chg_params; + const struct abx500_fg_parameters *fg_params; +}; + +struct abx500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct abx500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct abx500_bm_plat_data { + struct abx500_bm_data *battery; + struct abx500_charger_platform_data *charger; + struct abx500_btemp_platform_data *btemp; + struct abx500_fg_platform_data *fg; + struct abx500_chargalg_platform_data *chargalg; +}; + int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg, u8 value); int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg, diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h new file mode 100644 index 000000000000..44310c98ee6e --- /dev/null +++ b/include/linux/mfd/abx500/ab8500-bm.h @@ -0,0 +1,474 @@ +/* + * Copyright ST-Ericsson 2012. + * + * Author: Arun Murthy <arun.murthy@stericsson.com> + * Licensed under GPLv2. + */ + +#ifndef _AB8500_BM_H +#define _AB8500_BM_H + +#include <linux/kernel.h> +#include <linux/mfd/abx500.h> + +/* + * System control 2 register offsets. + * bank = 0x02 + */ +#define AB8500_MAIN_WDOG_CTRL_REG 0x01 +#define AB8500_LOW_BAT_REG 0x03 +#define AB8500_BATT_OK_REG 0x04 +/* + * USB/ULPI register offsets + * Bank : 0x5 + */ +#define AB8500_USB_LINE_STAT_REG 0x80 + +/* + * Charger / status register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_STATUS1_REG 0x00 +#define AB8500_CH_STATUS2_REG 0x01 +#define AB8500_CH_USBCH_STAT1_REG 0x02 +#define AB8500_CH_USBCH_STAT2_REG 0x03 +#define AB8500_CH_FSM_STAT_REG 0x04 +#define AB8500_CH_STAT_REG 0x05 + +/* + * Charger / control register offfsets + * Bank : 0x0B + */ +#define AB8500_CH_VOLT_LVL_REG 0x40 +#define AB8500_CH_VOLT_LVL_MAX_REG 0x41 /*Only in Cut2.0*/ +#define AB8500_CH_OPT_CRNTLVL_REG 0x42 +#define AB8500_CH_OPT_CRNTLVL_MAX_REG 0x43 /*Only in Cut2.0*/ +#define AB8500_CH_WD_TIMER_REG 0x50 +#define AB8500_CHARG_WD_CTRL 0x51 +#define AB8500_BTEMP_HIGH_TH 0x52 +#define AB8500_LED_INDICATOR_PWM_CTRL 0x53 +#define AB8500_LED_INDICATOR_PWM_DUTY 0x54 +#define AB8500_BATT_OVV 0x55 +#define AB8500_CHARGER_CTRL 0x56 +#define AB8500_BAT_CTRL_CURRENT_SOURCE 0x60 /*Only in Cut2.0*/ + +/* + * Charger / main control register offsets + * Bank : 0x0B + */ +#define AB8500_MCH_CTRL1 0x80 +#define AB8500_MCH_CTRL2 0x81 +#define AB8500_MCH_IPT_CURLVL_REG 0x82 +#define AB8500_CH_WD_REG 0x83 + +/* + * Charger / USB control register offsets + * Bank : 0x0B + */ +#define AB8500_USBCH_CTRL1_REG 0xC0 +#define AB8500_USBCH_CTRL2_REG 0xC1 +#define AB8500_USBCH_IPT_CRNTLVL_REG 0xC2 + +/* + * Gas Gauge register offsets + * Bank : 0x0C + */ +#define AB8500_GASG_CC_CTRL_REG 0x00 +#define AB8500_GASG_CC_ACCU1_REG 0x01 +#define AB8500_GASG_CC_ACCU2_REG 0x02 +#define AB8500_GASG_CC_ACCU3_REG 0x03 +#define AB8500_GASG_CC_ACCU4_REG 0x04 +#define AB8500_GASG_CC_SMPL_CNTRL_REG 0x05 +#define AB8500_GASG_CC_SMPL_CNTRH_REG 0x06 +#define AB8500_GASG_CC_SMPL_CNVL_REG 0x07 +#define AB8500_GASG_CC_SMPL_CNVH_REG 0x08 +#define AB8500_GASG_CC_CNTR_AVGOFF_REG 0x09 +#define AB8500_GASG_CC_OFFSET_REG 0x0A +#define AB8500_GASG_CC_NCOV_ACCU 0x10 +#define AB8500_GASG_CC_NCOV_ACCU_CTRL 0x11 +#define AB8500_GASG_CC_NCOV_ACCU_LOW 0x12 +#define AB8500_GASG_CC_NCOV_ACCU_MED 0x13 +#define AB8500_GASG_CC_NCOV_ACCU_HIGH 0x14 + +/* + * Interrupt register offsets + * Bank : 0x0E + */ +#define AB8500_IT_SOURCE2_REG 0x01 +#define AB8500_IT_SOURCE21_REG 0x14 + +/* + * RTC register offsets + * Bank: 0x0F + */ +#define AB8500_RTC_BACKUP_CHG_REG 0x0C +#define AB8500_RTC_CC_CONF_REG 0x01 +#define AB8500_RTC_CTRL_REG 0x0B + +/* + * OTP register offsets + * Bank : 0x15 + */ +#define AB8500_OTP_CONF_15 0x0E + +/* GPADC constants from AB8500 spec, UM0836 */ +#define ADC_RESOLUTION 1024 +#define ADC_CH_MAIN_MIN 0 +#define ADC_CH_MAIN_MAX 20030 +#define ADC_CH_VBUS_MIN 0 +#define ADC_CH_VBUS_MAX 20030 +#define ADC_CH_VBAT_MIN 2300 +#define ADC_CH_VBAT_MAX 4800 +#define ADC_CH_BKBAT_MIN 0 +#define ADC_CH_BKBAT_MAX 3200 + +/* Main charge i/p current */ +#define MAIN_CH_IP_CUR_0P9A 0x80 +#define MAIN_CH_IP_CUR_1P0A 0x90 +#define MAIN_CH_IP_CUR_1P1A 0xA0 +#define MAIN_CH_IP_CUR_1P2A 0xB0 +#define MAIN_CH_IP_CUR_1P3A 0xC0 +#define MAIN_CH_IP_CUR_1P4A 0xD0 +#define MAIN_CH_IP_CUR_1P5A 0xE0 + +/* ChVoltLevel */ +#define CH_VOL_LVL_3P5 0x00 +#define CH_VOL_LVL_4P0 0x14 +#define CH_VOL_LVL_4P05 0x16 +#define CH_VOL_LVL_4P1 0x1B +#define CH_VOL_LVL_4P15 0x20 +#define CH_VOL_LVL_4P2 0x25 +#define CH_VOL_LVL_4P6 0x4D + +/* ChOutputCurrentLevel */ +#define CH_OP_CUR_LVL_0P1 0x00 +#define CH_OP_CUR_LVL_0P2 0x01 +#define CH_OP_CUR_LVL_0P3 0x02 +#define CH_OP_CUR_LVL_0P4 0x03 +#define CH_OP_CUR_LVL_0P5 0x04 +#define CH_OP_CUR_LVL_0P6 0x05 +#define CH_OP_CUR_LVL_0P7 0x06 +#define CH_OP_CUR_LVL_0P8 0x07 +#define CH_OP_CUR_LVL_0P9 0x08 +#define CH_OP_CUR_LVL_1P4 0x0D +#define CH_OP_CUR_LVL_1P5 0x0E +#define CH_OP_CUR_LVL_1P6 0x0F + +/* BTEMP High thermal limits */ +#define BTEMP_HIGH_TH_57_0 0x00 +#define BTEMP_HIGH_TH_52 0x01 +#define BTEMP_HIGH_TH_57_1 0x02 +#define BTEMP_HIGH_TH_62 0x03 + +/* current is mA */ +#define USB_0P1A 100 +#define USB_0P2A 200 +#define USB_0P3A 300 +#define USB_0P4A 400 +#define USB_0P5A 500 + +#define LOW_BAT_3P1V 0x20 +#define LOW_BAT_2P3V 0x00 +#define LOW_BAT_RESET 0x01 +#define LOW_BAT_ENABLE 0x01 + +/* Backup battery constants */ +#define BUP_ICH_SEL_50UA 0x00 +#define BUP_ICH_SEL_150UA 0x04 +#define BUP_ICH_SEL_300UA 0x08 +#define BUP_ICH_SEL_700UA 0x0C + +#define BUP_VCH_SEL_2P5V 0x00 +#define BUP_VCH_SEL_2P6V 0x01 +#define BUP_VCH_SEL_2P8V 0x02 +#define BUP_VCH_SEL_3P1V 0x03 + +/* Battery OVV constants */ +#define BATT_OVV_ENA 0x02 +#define BATT_OVV_TH_3P7 0x00 +#define BATT_OVV_TH_4P75 0x01 + +/* A value to indicate over voltage */ +#define BATT_OVV_VALUE 4750 + +/* VBUS OVV constants */ +#define VBUS_OVV_SELECT_MASK 0x78 +#define VBUS_OVV_SELECT_5P6V 0x00 +#define VBUS_OVV_SELECT_5P7V 0x08 +#define VBUS_OVV_SELECT_5P8V 0x10 +#define VBUS_OVV_SELECT_5P9V 0x18 +#define VBUS_OVV_SELECT_6P0V 0x20 +#define VBUS_OVV_SELECT_6P1V 0x28 +#define VBUS_OVV_SELECT_6P2V 0x30 +#define VBUS_OVV_SELECT_6P3V 0x38 + +#define VBUS_AUTO_IN_CURR_LIM_ENA 0x04 + +/* Fuel Gauge constants */ +#define RESET_ACCU 0x02 +#define READ_REQ 0x01 +#define CC_DEEP_SLEEP_ENA 0x02 +#define CC_PWR_UP_ENA 0x01 +#define CC_SAMPLES_40 0x28 +#define RD_NCONV_ACCU_REQ 0x01 +#define CC_CALIB 0x08 +#define CC_INTAVGOFFSET_ENA 0x10 +#define CC_MUXOFFSET 0x80 +#define CC_INT_CAL_N_AVG_MASK 0x60 +#define CC_INT_CAL_SAMPLES_16 0x40 +#define CC_INT_CAL_SAMPLES_8 0x20 +#define CC_INT_CAL_SAMPLES_4 0x00 + +/* RTC constants */ +#define RTC_BUP_CH_ENA 0x10 + +/* BatCtrl Current Source Constants */ +#define BAT_CTRL_7U_ENA 0x01 +#define BAT_CTRL_20U_ENA 0x02 +#define BAT_CTRL_CMP_ENA 0x04 +#define FORCE_BAT_CTRL_CMP_HIGH 0x08 +#define BAT_CTRL_PULL_UP_ENA 0x10 + +/* Battery type */ +#define BATTERY_UNKNOWN 00 + +/** + * struct res_to_temp - defines one point in a temp to res curve. To + * be used in battery packs that combines the identification resistor with a + * NTC resistor. + * @temp: battery pack temperature in Celcius + * @resist: NTC resistor net total resistance + */ +struct res_to_temp { + int temp; + int resist; +}; + +/** + * struct batres_vs_temp - defines one point in a temp vs battery internal + * resistance curve. + * @temp: battery pack temperature in Celcius + * @resist: battery internal reistance in mOhm + */ +struct batres_vs_temp { + int temp; + int resist; +}; + +/* Forward declaration */ +struct ab8500_fg; + +/** + * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds + * if not specified + * @recovery_sleep_timer: Time between measurements while recovering + * @recovery_total_time: Total recovery time + * @init_timer: Measurement interval during startup + * @init_discard_time: Time we discard voltage measurement at startup + * @init_total_time: Total init time during startup + * @high_curr_time: Time current has to be high to go to recovery + * @accu_charging: FG accumulation time while charging + * @accu_high_curr: FG accumulation time in high current mode + * @high_curr_threshold: High current threshold, in mA + * @lowbat_threshold: Low battery threshold, in mV + * @battok_falling_th_sel0 Threshold in mV for battOk signal sel0 + * Resolution in 50 mV step. + * @battok_raising_th_sel1 Threshold in mV for battOk signal sel1 + * Resolution in 50 mV step. + * @user_cap_limit Capacity reported from user must be within this + * limit to be considered as sane, in percentage + * points. + * @maint_thres This is the threshold where we stop reporting + * battery full while in maintenance, in per cent + */ +struct ab8500_fg_parameters { + int recovery_sleep_timer; + int recovery_total_time; + int init_timer; + int init_discard_time; + int init_total_time; + int high_curr_time; + int accu_charging; + int accu_high_curr; + int high_curr_threshold; + int lowbat_threshold; + int battok_falling_th_sel0; + int battok_raising_th_sel1; + int user_cap_limit; + int maint_thres; +}; + +/** + * struct ab8500_charger_maximization - struct used by the board config. + * @use_maxi: Enable maximization for this battery type + * @maxi_chg_curr: Maximum charger current allowed + * @maxi_wait_cycles: cycles to wait before setting charger current + * @charger_curr_step delta between two charger current settings (mA) + */ +struct ab8500_maxim_parameters { + bool ena_maxi; + int chg_curr; + int wait_cycles; + int charger_curr_step; +}; + +/** + * struct ab8500_bm_capacity_levels - ab8500 capacity level data + * @critical: critical capacity level in percent + * @low: low capacity level in percent + * @normal: normal capacity level in percent + * @high: high capacity level in percent + * @full: full capacity level in percent + */ +struct ab8500_bm_capacity_levels { + int critical; + int low; + int normal; + int high; + int full; +}; + +/** + * struct ab8500_bm_charger_parameters - Charger specific parameters + * @usb_volt_max: maximum allowed USB charger voltage in mV + * @usb_curr_max: maximum allowed USB charger current in mA + * @ac_volt_max: maximum allowed AC charger voltage in mV + * @ac_curr_max: maximum allowed AC charger current in mA + */ +struct ab8500_bm_charger_parameters { + int usb_volt_max; + int usb_curr_max; + int ac_volt_max; + int ac_curr_max; +}; + +/** + * struct ab8500_bm_data - ab8500 battery management data + * @temp_under under this temp, charging is stopped + * @temp_low between this temp and temp_under charging is reduced + * @temp_high between this temp and temp_over charging is reduced + * @temp_over over this temp, charging is stopped + * @temp_interval_chg temperature measurement interval in s when charging + * @temp_interval_nochg temperature measurement interval in s when not charging + * @main_safety_tmr_h safety timer for main charger + * @usb_safety_tmr_h safety timer for usb charger + * @bkup_bat_v voltage which we charge the backup battery with + * @bkup_bat_i current which we charge the backup battery with + * @no_maintenance indicates that maintenance charging is disabled + * @adc_therm placement of thermistor, batctrl or battemp adc + * @chg_unknown_bat flag to enable charging of unknown batteries + * @enable_overshoot flag to enable VBAT overshoot control + * @fg_res resistance of FG resistor in 0.1mOhm + * @n_btypes number of elements in array bat_type + * @batt_id index of the identified battery in array bat_type + * @interval_charging charge alg cycle period time when charging (sec) + * @interval_not_charging charge alg cycle period time when not charging (sec) + * @temp_hysteresis temperature hysteresis + * @gnd_lift_resistance Battery ground to phone ground resistance (mOhm) + * @maxi: maximization parameters + * @cap_levels capacity in percent for the different capacity levels + * @bat_type table of supported battery types + * @chg_params charger parameters + * @fg_params fuel gauge parameters + */ +struct ab8500_bm_data { + int temp_under; + int temp_low; + int temp_high; + int temp_over; + int temp_interval_chg; + int temp_interval_nochg; + int main_safety_tmr_h; + int usb_safety_tmr_h; + int bkup_bat_v; + int bkup_bat_i; + bool no_maintenance; + bool chg_unknown_bat; + bool enable_overshoot; + enum abx500_adc_therm adc_therm; + int fg_res; + int n_btypes; + int batt_id; + int interval_charging; + int interval_not_charging; + int temp_hysteresis; + int gnd_lift_resistance; + const struct ab8500_maxim_parameters *maxi; + const struct ab8500_bm_capacity_levels *cap_levels; + const struct ab8500_bm_charger_parameters *chg_params; + const struct ab8500_fg_parameters *fg_params; +}; + +struct ab8500_charger_platform_data { + char **supplied_to; + size_t num_supplicants; + bool autopower_cfg; +}; + +struct ab8500_btemp_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_fg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; + +struct ab8500_chargalg_platform_data { + char **supplied_to; + size_t num_supplicants; +}; +struct ab8500_btemp; +struct ab8500_gpadc; +struct ab8500_fg; +#ifdef CONFIG_AB8500_BM +void ab8500_fg_reinit(void); +void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA); +struct ab8500_btemp *ab8500_btemp_get(void); +int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp); +struct ab8500_fg *ab8500_fg_get(void); +int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev); +int ab8500_fg_inst_curr_start(struct ab8500_fg *di); +int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res); +int ab8500_fg_inst_curr_done(struct ab8500_fg *di); + +#else +int ab8500_fg_inst_curr_done(struct ab8500_fg *di) +{ +} +static void ab8500_fg_reinit(void) +{ +} +static void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA) +{ +} +static struct ab8500_btemp *ab8500_btemp_get(void) +{ + return NULL; +} +static int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp) +{ + return 0; +} +struct ab8500_fg *ab8500_fg_get(void) +{ + return NULL; +} +static int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_start(struct ab8500_fg *di) +{ + return -ENODEV; +} + +static inline int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res) +{ + return -ENODEV; +} + +#endif +#endif /* _AB8500_BM_H */ diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h new file mode 100644 index 000000000000..9b07725750c9 --- /dev/null +++ b/include/linux/mfd/abx500/ux500_chargalg.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL), version 2 + */ + +#ifndef _UX500_CHARGALG_H +#define _UX500_CHARGALG_H + +#include <linux/power_supply.h> + +#define psy_to_ux500_charger(x) container_of((x), \ + struct ux500_charger, psy) + +/* Forward declaration */ +struct ux500_charger; + +struct ux500_charger_ops { + int (*enable) (struct ux500_charger *, int, int, int); + int (*kick_wd) (struct ux500_charger *); + int (*update_curr) (struct ux500_charger *, int); +}; + +/** + * struct ux500_charger - power supply ux500 charger sub class + * @psy power supply base class + * @ops ux500 charger operations + * @max_out_volt maximum output charger voltage in mV + * @max_out_curr maximum output charger current in mA + */ +struct ux500_charger { + struct power_supply psy; + struct ux500_charger_ops ops; + int max_out_volt; + int max_out_curr; +}; + +#endif diff --git a/include/linux/power/max17042_battery.h b/include/linux/power/max17042_battery.h index fe99211fb2b8..e01b167e66f0 100644 --- a/include/linux/power/max17042_battery.h +++ b/include/linux/power/max17042_battery.h @@ -27,6 +27,8 @@ #define MAX17042_BATTERY_FULL (100) #define MAX17042_DEFAULT_SNS_RESISTOR (10000) +#define MAX17042_CHARACTERIZATION_DATA_SIZE 48 + enum max17042_register { MAX17042_STATUS = 0x00, MAX17042_VALRT_Th = 0x01, @@ -40,11 +42,11 @@ enum max17042_register { MAX17042_VCELL = 0x09, MAX17042_Current = 0x0A, MAX17042_AvgCurrent = 0x0B, - MAX17042_Qresidual = 0x0C, + MAX17042_SOC = 0x0D, MAX17042_AvSOC = 0x0E, MAX17042_RemCap = 0x0F, - MAX17402_FullCAP = 0x10, + MAX17042_FullCAP = 0x10, MAX17042_TTE = 0x11, MAX17042_V_empty = 0x12, @@ -62,14 +64,14 @@ enum max17042_register { MAX17042_AvCap = 0x1F, MAX17042_ManName = 0x20, MAX17042_DevName = 0x21, - MAX17042_DevChem = 0x22, + MAX17042_FullCAPNom = 0x23, MAX17042_TempNom = 0x24, - MAX17042_TempCold = 0x25, + MAX17042_TempLim = 0x25, MAX17042_TempHot = 0x26, MAX17042_AIN = 0x27, MAX17042_LearnCFG = 0x28, - MAX17042_SHFTCFG = 0x29, + MAX17042_FilterCFG = 0x29, MAX17042_RelaxCFG = 0x2A, MAX17042_MiscCFG = 0x2B, MAX17042_TGAIN = 0x2C, @@ -77,22 +79,41 @@ enum max17042_register { MAX17042_CGAIN = 0x2E, MAX17042_COFF = 0x2F, - MAX17042_Q_empty = 0x33, + MAX17042_MaskSOC = 0x32, + MAX17042_SOC_empty = 0x33, MAX17042_T_empty = 0x34, + MAX17042_FullCAP0 = 0x35, + MAX17042_LAvg_empty = 0x36, + MAX17042_FCTC = 0x37, MAX17042_RCOMP0 = 0x38, MAX17042_TempCo = 0x39, - MAX17042_Rx = 0x3A, - MAX17042_T_empty0 = 0x3B, + MAX17042_EmptyTempCo = 0x3A, + MAX17042_K_empty0 = 0x3B, MAX17042_TaskPeriod = 0x3C, MAX17042_FSTAT = 0x3D, MAX17042_SHDNTIMER = 0x3F, - MAX17042_VFRemCap = 0x4A, + MAX17042_dQacc = 0x45, + MAX17042_dPacc = 0x46, + + MAX17042_VFSOC0 = 0x48, MAX17042_QH = 0x4D, MAX17042_QL = 0x4E, + + MAX17042_VFSOC0Enable = 0x60, + MAX17042_MLOCKReg1 = 0x62, + MAX17042_MLOCKReg2 = 0x63, + + MAX17042_MODELChrTbl = 0x80, + + MAX17042_OCV = 0xEE, + + MAX17042_OCVInternal = 0xFB, + + MAX17042_VFSOC = 0xFF, }; /* @@ -105,10 +126,64 @@ struct max17042_reg_data { u16 data; }; +struct max17042_config_data { + /* External current sense resistor value in milli-ohms */ + u32 cur_sense_val; + + /* A/D measurement */ + u16 tgain; /* 0x2C */ + u16 toff; /* 0x2D */ + u16 cgain; /* 0x2E */ + u16 coff; /* 0x2F */ + + /* Alert / Status */ + u16 valrt_thresh; /* 0x01 */ + u16 talrt_thresh; /* 0x02 */ + u16 soc_alrt_thresh; /* 0x03 */ + u16 config; /* 0x01D */ + u16 shdntimer; /* 0x03F */ + + /* App data */ + u16 design_cap; /* 0x18 */ + u16 ichgt_term; /* 0x1E */ + + /* MG3 config */ + u16 at_rate; /* 0x04 */ + u16 learn_cfg; /* 0x28 */ + u16 filter_cfg; /* 0x29 */ + u16 relax_cfg; /* 0x2A */ + u16 misc_cfg; /* 0x2B */ + u16 masksoc; /* 0x32 */ + + /* MG3 save and restore */ + u16 fullcap; /* 0x10 */ + u16 fullcapnom; /* 0x23 */ + u16 socempty; /* 0x33 */ + u16 lavg_empty; /* 0x36 */ + u16 dqacc; /* 0x45 */ + u16 dpacc; /* 0x46 */ + + /* Cell technology from power_supply.h */ + u16 cell_technology; + + /* Cell Data */ + u16 vempty; /* 0x12 */ + u16 temp_nom; /* 0x24 */ + u16 temp_lim; /* 0x25 */ + u16 fctc; /* 0x37 */ + u16 rcomp0; /* 0x38 */ + u16 tcompc0; /* 0x39 */ + u16 empty_tempco; /* 0x3A */ + u16 kempty0; /* 0x3B */ + u16 cell_char_tbl[MAX17042_CHARACTERIZATION_DATA_SIZE]; +} __packed; + struct max17042_platform_data { struct max17042_reg_data *init_data; + struct max17042_config_data *config_data; int num_init_data; /* Number of enties in init_data array */ bool enable_current_sense; + bool enable_por_init; /* Use POR init from Maxim appnote */ /* * R_sns in micro-ohms. diff --git a/include/linux/power/smb347-charger.h b/include/linux/power/smb347-charger.h new file mode 100644 index 000000000000..b3cb20dab55f --- /dev/null +++ b/include/linux/power/smb347-charger.h @@ -0,0 +1,117 @@ +/* + * Summit Microelectronics SMB347 Battery Charger Driver + * + * Copyright (C) 2011, Intel Corporation + * + * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com> + * Mika Westerberg <mika.westerberg@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef SMB347_CHARGER_H +#define SMB347_CHARGER_H + +#include <linux/types.h> +#include <linux/power_supply.h> + +enum { + /* use the default compensation method */ + SMB347_SOFT_TEMP_COMPENSATE_DEFAULT = -1, + + SMB347_SOFT_TEMP_COMPENSATE_NONE, + SMB347_SOFT_TEMP_COMPENSATE_CURRENT, + SMB347_SOFT_TEMP_COMPENSATE_VOLTAGE, +}; + +/* Use default factory programmed value for hard/soft temperature limit */ +#define SMB347_TEMP_USE_DEFAULT -273 + +/* + * Charging enable can be controlled by software (via i2c) by + * smb347-charger driver or by EN pin (active low/high). + */ +enum smb347_chg_enable { + SMB347_CHG_ENABLE_SW, + SMB347_CHG_ENABLE_PIN_ACTIVE_LOW, + SMB347_CHG_ENABLE_PIN_ACTIVE_HIGH, +}; + +/** + * struct smb347_charger_platform_data - platform data for SMB347 charger + * @battery_info: Information about the battery + * @max_charge_current: maximum current (in uA) the battery can be charged + * @max_charge_voltage: maximum voltage (in uV) the battery can be charged + * @pre_charge_current: current (in uA) to use in pre-charging phase + * @termination_current: current (in uA) used to determine when the + * charging cycle terminates + * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to + * pre-charge to fast charge mode + * @mains_current_limit: maximum input current drawn from AC/DC input (in uA) + * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB + * input + * @chip_temp_threshold: die temperature where device starts limiting charge + * current [%100 - %130] (in degree C) + * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C), + * granularity is 5 deg C. + * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C), + * granularity is 5 deg C. + * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C), + * granularity is 5 deg C. + * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C), + * granularity is 5 deg C. + * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit + * @soft_temp_limit_compensation: compensation method when soft temperature + * limit is hit + * @charge_current_compensation: current (in uA) for charging compensation + * current when temperature hits soft limits + * @use_mains: AC/DC input can be used + * @use_usb: USB input can be used + * @use_usb_otg: USB OTG output can be used (not implemented yet) + * @irq_gpio: GPIO number used for interrupts (%-1 if not used) + * @enable_control: how charging enable/disable is controlled + * (driver/pin controls) + * + * @use_main, @use_usb, and @use_usb_otg are means to enable/disable + * hardware support for these. This is useful when we want to have for + * example OTG charging controlled via OTG transceiver driver and not by + * the SMB347 hardware. + * + * Hard and soft temperature limit values are given as described in the + * device data sheet and assuming NTC beta value is %3750. Even if this is + * not the case, these values should be used. They can be mapped to the + * corresponding NTC beta values with the help of table %2 in the data + * sheet. So for example if NTC beta is %3375 and we want to program hard + * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50. + * + * If zero value is given in any of the current and voltage values, the + * factory programmed default will be used. For soft/hard temperature + * values, pass in %SMB347_TEMP_USE_DEFAULT instead. + */ +struct smb347_charger_platform_data { + struct power_supply_info battery_info; + unsigned int max_charge_current; + unsigned int max_charge_voltage; + unsigned int pre_charge_current; + unsigned int termination_current; + unsigned int pre_to_fast_voltage; + unsigned int mains_current_limit; + unsigned int usb_hc_current_limit; + unsigned int chip_temp_threshold; + int soft_cold_temp_limit; + int soft_hot_temp_limit; + int hard_cold_temp_limit; + int hard_hot_temp_limit; + bool suspend_on_hard_temp_limit; + unsigned int soft_temp_limit_compensation; + unsigned int charge_current_compensation; + bool use_mains; + bool use_usb; + bool use_usb_otg; + int irq_gpio; + enum smb347_chg_enable enable_control; +}; + +#endif /* SMB347_CHARGER_H */ |
