diff options
Diffstat (limited to 'include')
38 files changed, 3797 insertions, 682 deletions
diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h index d856e640acd3..59083ed85232 100644 --- a/include/asm-sparc/idprom.h +++ b/include/asm-sparc/idprom.h @@ -7,27 +7,19 @@ #ifndef _SPARC_IDPROM_H #define _SPARC_IDPROM_H -/* Offset into the EEPROM where the id PROM is located on the 4c */ -#define IDPROM_OFFSET 0x7d8 +#include <linux/types.h> -/* On sun4m; physical. */ -/* MicroSPARC(-II) does not decode 31rd bit, but it works. */ -#define IDPROM_OFFSET_M 0xfd8 - -struct idprom -{ - unsigned char id_format; /* Format identifier (always 0x01) */ - unsigned char id_machtype; /* Machine type */ - unsigned char id_ethaddr[6]; /* Hardware ethernet address */ - long id_date; /* Date of manufacture */ - unsigned int id_sernum:24; /* Unique serial number */ - unsigned char id_cksum; /* Checksum - xor of the data bytes */ - unsigned char reserved[16]; +struct idprom { + u8 id_format; /* Format identifier (always 0x01) */ + u8 id_machtype; /* Machine type */ + u8 id_ethaddr[6]; /* Hardware ethernet address */ + s32 id_date; /* Date of manufacture */ + u32 id_sernum:24; /* Unique serial number */ + u8 id_cksum; /* Checksum - xor of the data bytes */ + u8 reserved[16]; }; extern struct idprom *idprom; extern void idprom_init(void); -#define IDPROM_SIZE (sizeof(struct idprom)) - #endif /* !(_SPARC_IDPROM_H) */ diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h index d0d76b30eb4c..f283f8aaf6a9 100644 --- a/include/asm-sparc/oplib.h +++ b/include/asm-sparc/oplib.h @@ -165,6 +165,7 @@ enum prom_input_device { PROMDEV_ITTYA, /* input from ttya */ PROMDEV_ITTYB, /* input from ttyb */ PROMDEV_IRSC, /* input from rsc */ + PROMDEV_IVCONS, /* input from virtual-console */ PROMDEV_I_UNK, }; @@ -177,6 +178,7 @@ enum prom_output_device { PROMDEV_OTTYA, /* to ttya */ PROMDEV_OTTYB, /* to ttyb */ PROMDEV_ORSC, /* to rsc */ + PROMDEV_OVCONS, /* to virtual-console */ PROMDEV_O_UNK, }; diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h index f8f1ec1f06e6..3cf132e1aa25 100644 --- a/include/asm-sparc/uaccess.h +++ b/include/asm-sparc/uaccess.h @@ -120,17 +120,6 @@ case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ default: __pu_ret = __put_user_bad(); break; \ } } else { __pu_ret = -EFAULT; } __pu_ret; }) -#define __put_user_check_ret(x,addr,size,retval) ({ \ -register int __foo __asm__ ("l1"); \ -if (__access_ok(addr,size)) { \ -switch (size) { \ -case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \ -case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \ -case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \ -case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \ -default: if (__put_user_bad()) return retval; break; \ -} } else return retval; }) - #define __put_user_nocheck(x,addr,size) ({ \ register int __pu_ret; \ switch (size) { \ @@ -141,16 +130,6 @@ case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ default: __pu_ret = __put_user_bad(); break; \ } __pu_ret; }) -#define __put_user_nocheck_ret(x,addr,size,retval) ({ \ -register int __foo __asm__ ("l1"); \ -switch (size) { \ -case 1: __put_user_asm_ret(x,b,addr,retval,__foo); break; \ -case 2: __put_user_asm_ret(x,h,addr,retval,__foo); break; \ -case 4: __put_user_asm_ret(x,,addr,retval,__foo); break; \ -case 8: __put_user_asm_ret(x,d,addr,retval,__foo); break; \ -default: if (__put_user_bad()) return retval; break; \ -} }) - #define __put_user_asm(x,size,addr,ret) \ __asm__ __volatile__( \ "/* Put user asm, inline. */\n" \ @@ -170,32 +149,6 @@ __asm__ __volatile__( \ : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ "i" (-EFAULT)) -#define __put_user_asm_ret(x,size,addr,ret,foo) \ -if (__builtin_constant_p(ret) && ret == -EFAULT) \ -__asm__ __volatile__( \ - "/* Put user asm ret, inline. */\n" \ -"1:\t" "st"#size " %1, %2\n\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b, __ret_efault\n\n\t" \ - ".previous\n\n\t" \ - : "=r" (foo) : "r" (x), "m" (*__m(addr))); \ -else \ -__asm__ __volatile( \ - "/* Put user asm ret, inline. */\n" \ -"1:\t" "st"#size " %1, %2\n\n\t" \ - ".section .fixup,#alloc,#execinstr\n\t" \ - ".align 4\n" \ -"3:\n\t" \ - "ret\n\t" \ - " restore %%g0, %3, %%o0\n\t" \ - ".previous\n\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b, 3b\n\n\t" \ - ".previous\n\n\t" \ - : "=r" (foo) : "r" (x), "m" (*__m(addr)), "i" (ret)) - extern int __put_user_bad(void); #define __get_user_check(x,addr,size,type) ({ \ diff --git a/include/asm-sparc64/a.out.h b/include/asm-sparc64/a.out.h index 02af289e3f46..35cb5c9e0c92 100644 --- a/include/asm-sparc64/a.out.h +++ b/include/asm-sparc64/a.out.h @@ -95,7 +95,11 @@ struct relocation_info /* used when header.a_machtype == M_SPARC */ #ifdef __KERNEL__ -#define STACK_TOP (test_thread_flag(TIF_32BIT) ? 0xf0000000 : 0x80000000000L) +#define STACK_TOP32 ((1UL << 32UL) - PAGE_SIZE) +#define STACK_TOP64 (0x0000080000000000UL - (1UL << 32UL)) + +#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \ + STACK_TOP32 : STACK_TOP64) #endif diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h index 534855660f2a..662a21107ae6 100644 --- a/include/asm-sparc64/asi.h +++ b/include/asm-sparc64/asi.h @@ -25,14 +25,27 @@ /* SpitFire and later extended ASIs. The "(III)" marker designates * UltraSparc-III and later specific ASIs. The "(CMT)" marker designates - * Chip Multi Threading specific ASIs. + * Chip Multi Threading specific ASIs. "(NG)" designates Niagara specific + * ASIs, "(4V)" designates SUN4V specific ASIs. */ #define ASI_PHYS_USE_EC 0x14 /* PADDR, E-cachable */ #define ASI_PHYS_BYPASS_EC_E 0x15 /* PADDR, E-bit */ +#define ASI_BLK_AIUP_4V 0x16 /* (4V) Prim, user, block ld/st */ +#define ASI_BLK_AIUS_4V 0x17 /* (4V) Sec, user, block ld/st */ #define ASI_PHYS_USE_EC_L 0x1c /* PADDR, E-cachable, little endian*/ #define ASI_PHYS_BYPASS_EC_E_L 0x1d /* PADDR, E-bit, little endian */ +#define ASI_BLK_AIUP_L_4V 0x1e /* (4V) Prim, user, block, l-endian*/ +#define ASI_BLK_AIUS_L_4V 0x1f /* (4V) Sec, user, block, l-endian */ +#define ASI_SCRATCHPAD 0x20 /* (4V) Scratch Pad Registers */ +#define ASI_MMU 0x21 /* (4V) MMU Context Registers */ +#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load, + * secondary, user + */ #define ASI_NUCLEUS_QUAD_LDD 0x24 /* Cachable, qword load */ +#define ASI_QUEUE 0x25 /* (4V) Interrupt Queue Registers */ +#define ASI_QUAD_LDD_PHYS_4V 0x26 /* (4V) Physical, qword load */ #define ASI_NUCLEUS_QUAD_LDD_L 0x2c /* Cachable, qword load, l-endian */ +#define ASI_QUAD_LDD_PHYS_L_4V 0x2e /* (4V) Phys, qword load, l-endian */ #define ASI_PCACHE_DATA_STATUS 0x30 /* (III) PCache data stat RAM diag */ #define ASI_PCACHE_DATA 0x31 /* (III) PCache data RAM diag */ #define ASI_PCACHE_TAG 0x32 /* (III) PCache tag RAM diag */ @@ -137,6 +150,9 @@ #define ASI_FL16_SL 0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/ #define ASI_BLK_COMMIT_P 0xe0 /* Primary, blk store commit */ #define ASI_BLK_COMMIT_S 0xe1 /* Secondary, blk store commit */ +#define ASI_BLK_INIT_QUAD_LDD_P 0xe2 /* (NG) init-store, twin load, + * primary, implicit + */ #define ASI_BLK_P 0xf0 /* Primary, blk ld/st */ #define ASI_BLK_S 0xf1 /* Secondary, blk ld/st */ #define ASI_BLK_PL 0xf8 /* Primary, blk ld/st, little */ diff --git a/include/asm-sparc64/cpudata.h b/include/asm-sparc64/cpudata.h index 74de79dca915..c66a81bbc84d 100644 --- a/include/asm-sparc64/cpudata.h +++ b/include/asm-sparc64/cpudata.h @@ -1,41 +1,224 @@ /* cpudata.h: Per-cpu parameters. * - * Copyright (C) 2003, 2005 David S. Miller (davem@redhat.com) + * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net) */ #ifndef _SPARC64_CPUDATA_H #define _SPARC64_CPUDATA_H +#include <asm/hypervisor.h> +#include <asm/asi.h> + +#ifndef __ASSEMBLY__ + #include <linux/percpu.h> +#include <linux/threads.h> typedef struct { /* Dcache line 1 */ unsigned int __softirq_pending; /* must be 1st, see rtrap.S */ unsigned int multiplier; unsigned int counter; - unsigned int idle_volume; + unsigned int __pad1; unsigned long clock_tick; /* %tick's per second */ unsigned long udelay_val; - /* Dcache line 2 */ - unsigned int pgcache_size; - unsigned int __pad1; - unsigned long *pte_cache[2]; - unsigned long *pgd_cache; - - /* Dcache line 3, rarely used */ + /* Dcache line 2, rarely used */ unsigned int dcache_size; unsigned int dcache_line_size; unsigned int icache_size; unsigned int icache_line_size; unsigned int ecache_size; unsigned int ecache_line_size; - unsigned int __pad2; unsigned int __pad3; + unsigned int __pad4; } cpuinfo_sparc; DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); #define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) #define local_cpu_data() __get_cpu_var(__cpu_data) +/* Trap handling code needs to get at a few critical values upon + * trap entry and to process TSB misses. These cannot be in the + * per_cpu() area as we really need to lock them into the TLB and + * thus make them part of the main kernel image. As a result we + * try to make this as small as possible. + * + * This is padded out and aligned to 64-bytes to avoid false sharing + * on SMP. + */ + +/* If you modify the size of this structure, please update + * TRAP_BLOCK_SZ_SHIFT below. + */ +struct thread_info; +struct trap_per_cpu { +/* D-cache line 1: Basic thread information, cpu and device mondo queues */ + struct thread_info *thread; + unsigned long pgd_paddr; + unsigned long cpu_mondo_pa; + unsigned long dev_mondo_pa; + +/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */ + unsigned long resum_mondo_pa; + unsigned long resum_kernel_buf_pa; + unsigned long nonresum_mondo_pa; + unsigned long nonresum_kernel_buf_pa; + +/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */ + struct hv_fault_status fault_info; + +/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list. */ + unsigned long cpu_mondo_block_pa; + unsigned long cpu_list_pa; + unsigned long __pad1[2]; + +/* Dcache line 8: Unused, needed to keep trap_block a power-of-2 in size. */ + unsigned long __pad2[4]; +} __attribute__((aligned(64))); +extern struct trap_per_cpu trap_block[NR_CPUS]; +extern void init_cur_cpu_trap(struct thread_info *); +extern void setup_tba(void); + +struct cpuid_patch_entry { + unsigned int addr; + unsigned int cheetah_safari[4]; + unsigned int cheetah_jbus[4]; + unsigned int starfire[4]; + unsigned int sun4v[4]; +}; +extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end; + +struct sun4v_1insn_patch_entry { + unsigned int addr; + unsigned int insn; +}; +extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch, + __sun4v_1insn_patch_end; + +struct sun4v_2insn_patch_entry { + unsigned int addr; + unsigned int insns[2]; +}; +extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch, + __sun4v_2insn_patch_end; + +#endif /* !(__ASSEMBLY__) */ + +#define TRAP_PER_CPU_THREAD 0x00 +#define TRAP_PER_CPU_PGD_PADDR 0x08 +#define TRAP_PER_CPU_CPU_MONDO_PA 0x10 +#define TRAP_PER_CPU_DEV_MONDO_PA 0x18 +#define TRAP_PER_CPU_RESUM_MONDO_PA 0x20 +#define TRAP_PER_CPU_RESUM_KBUF_PA 0x28 +#define TRAP_PER_CPU_NONRESUM_MONDO_PA 0x30 +#define TRAP_PER_CPU_NONRESUM_KBUF_PA 0x38 +#define TRAP_PER_CPU_FAULT_INFO 0x40 +#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA 0xc0 +#define TRAP_PER_CPU_CPU_LIST_PA 0xc8 + +#define TRAP_BLOCK_SZ_SHIFT 8 + +#include <asm/scratchpad.h> + +#define __GET_CPUID(REG) \ + /* Spitfire implementation (default). */ \ +661: ldxa [%g0] ASI_UPA_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x1f, REG; \ + nop; \ + .section .cpuid_patch, "ax"; \ + /* Instruction location. */ \ + .word 661b; \ + /* Cheetah Safari implementation. */ \ + ldxa [%g0] ASI_SAFARI_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x3ff, REG; \ + nop; \ + /* Cheetah JBUS implementation. */ \ + ldxa [%g0] ASI_JBUS_CONFIG, REG; \ + srlx REG, 17, REG; \ + and REG, 0x1f, REG; \ + nop; \ + /* Starfire implementation. */ \ + sethi %hi(0x1fff40000d0 >> 9), REG; \ + sllx REG, 9, REG; \ + or REG, 0xd0, REG; \ + lduwa [REG] ASI_PHYS_BYPASS_EC_E, REG;\ + /* sun4v implementation. */ \ + mov SCRATCHPAD_CPUID, REG; \ + ldxa [REG] ASI_SCRATCHPAD, REG; \ + nop; \ + nop; \ + .previous; + +#ifdef CONFIG_SMP + +#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + __GET_CPUID(TMP) \ + sethi %hi(trap_block), DEST; \ + sllx TMP, TRAP_BLOCK_SZ_SHIFT, TMP; \ + or DEST, %lo(trap_block), DEST; \ + add DEST, TMP, DEST; \ + +/* Clobbers TMP, current address space PGD phys address into DEST. */ +#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; + +/* Clobbers TMP, loads local processor's IRQ work area into DEST. */ +#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \ + __GET_CPUID(TMP) \ + sethi %hi(__irq_work), DEST; \ + sllx TMP, 6, TMP; \ + or DEST, %lo(__irq_work), DEST; \ + add DEST, TMP, DEST; + +/* Clobbers TMP, loads DEST with current thread info pointer. */ +#define TRAP_LOAD_THREAD_REG(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_THREAD], DEST; + +/* Given the current thread info pointer in THR, load the per-cpu + * area base of the current processor into DEST. REG1, REG2, and REG3 are + * clobbered. + * + * You absolutely cannot use DEST as a temporary in this code. The + * reason is that traps can happen during execution, and return from + * trap will load the fully resolved DEST per-cpu base. This can corrupt + * the calculations done by the macro mid-stream. + */ +#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) \ + ldub [THR + TI_CPU], REG1; \ + sethi %hi(__per_cpu_shift), REG3; \ + sethi %hi(__per_cpu_base), REG2; \ + ldx [REG3 + %lo(__per_cpu_shift)], REG3; \ + ldx [REG2 + %lo(__per_cpu_base)], REG2; \ + sllx REG1, REG3, REG3; \ + add REG3, REG2, DEST; + +#else + +#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + sethi %hi(trap_block), DEST; \ + or DEST, %lo(trap_block), DEST; \ + +/* Uniprocessor versions, we know the cpuid is zero. */ +#define TRAP_LOAD_PGD_PHYS(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_PGD_PADDR], DEST; + +#define TRAP_LOAD_IRQ_WORK(DEST, TMP) \ + sethi %hi(__irq_work), DEST; \ + or DEST, %lo(__irq_work), DEST; + +#define TRAP_LOAD_THREAD_REG(DEST, TMP) \ + TRAP_LOAD_TRAP_BLOCK(DEST, TMP) \ + ldx [DEST + TRAP_PER_CPU_THREAD], DEST; + +/* No per-cpu areas on uniprocessor, so no need to load DEST. */ +#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3) + +#endif /* !(CONFIG_SMP) */ + #endif /* _SPARC64_CPUDATA_H */ diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h index 69539a8ab833..303d85e2f82e 100644 --- a/include/asm-sparc64/elf.h +++ b/include/asm-sparc64/elf.h @@ -10,6 +10,7 @@ #ifdef __KERNEL__ #include <asm/processor.h> #include <asm/uaccess.h> +#include <asm/spitfire.h> #endif /* @@ -68,6 +69,7 @@ #define HWCAP_SPARC_MULDIV 8 #define HWCAP_SPARC_V9 16 #define HWCAP_SPARC_ULTRA3 32 +#define HWCAP_SPARC_BLKINIT 64 /* * These are used to set parameters in the core dumps. @@ -145,11 +147,21 @@ typedef struct { instruction set this cpu supports. */ /* On Ultra, we support all of the v8 capabilities. */ -#define ELF_HWCAP ((HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ - HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV | \ - HWCAP_SPARC_V9) | \ - ((tlb_type == cheetah || tlb_type == cheetah_plus) ? \ - HWCAP_SPARC_ULTRA3 : 0)) +static inline unsigned int sparc64_elf_hwcap(void) +{ + unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | + HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV | + HWCAP_SPARC_V9); + + if (tlb_type == cheetah || tlb_type == cheetah_plus) + cap |= HWCAP_SPARC_ULTRA3; + else if (tlb_type == hypervisor) + cap |= HWCAP_SPARC_BLKINIT; + + return cap; +} + +#define ELF_HWCAP sparc64_elf_hwcap(); /* This yields a string that ld.so will use to load implementation specific libraries for optimization. This is more specific in diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h index 0abd3a674e8f..67960a751f4d 100644 --- a/include/asm-sparc64/head.h +++ b/include/asm-sparc64/head.h @@ -4,12 +4,21 @@ #include <asm/pstate.h> + /* wrpr %g0, val, %gl */ +#define SET_GL(val) \ + .word 0xa1902000 | val + + /* rdpr %gl, %gN */ +#define GET_GL_GLOBAL(N) \ + .word 0x81540000 | (N << 25) + #define KERNBASE 0x400000 #define PTREGS_OFF (STACK_BIAS + STACKFRAME_SZ) #define __CHEETAH_ID 0x003e0014 #define __JALAPENO_ID 0x003e0016 +#define __SERRANO_ID 0x003e0022 #define CHEETAH_MANUF 0x003e #define CHEETAH_IMPL 0x0014 /* Ultra-III */ @@ -19,6 +28,12 @@ #define PANTHER_IMPL 0x0019 /* Ultra-IV+ */ #define SERRANO_IMPL 0x0022 /* Ultra-IIIi+ */ +#define BRANCH_IF_SUN4V(tmp1,label) \ + sethi %hi(is_sun4v), %tmp1; \ + lduw [%tmp1 + %lo(is_sun4v)], %tmp1; \ + brnz,pn %tmp1, label; \ + nop + #define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label) \ rdpr %ver, %tmp1; \ sethi %hi(__CHEETAH_ID), %tmp2; \ diff --git a/include/asm-sparc64/hypervisor.h b/include/asm-sparc64/hypervisor.h new file mode 100644 index 000000000000..612bf319753f --- /dev/null +++ b/include/asm-sparc64/hypervisor.h @@ -0,0 +1,2128 @@ +#ifndef _SPARC64_HYPERVISOR_H +#define _SPARC64_HYPERVISOR_H + +/* Sun4v hypervisor interfaces and defines. + * + * Hypervisor calls are made via traps to software traps number 0x80 + * and above. Registers %o0 to %o5 serve as argument, status, and + * return value registers. + * + * There are two kinds of these traps. First there are the normal + * "fast traps" which use software trap 0x80 and encode the function + * to invoke by number in register %o5. Argument and return value + * handling is as follows: + * + * ----------------------------------------------- + * | %o5 | function number | undefined | + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * The second type are "hyper-fast traps" which encode the function + * number in the software trap number itself. So these use trap + * numbers > 0x80. The register usage for hyper-fast traps is as + * follows: + * + * ----------------------------------------------- + * | %o0 | argument 0 | return status | + * | %o1 | argument 1 | return value 1 | + * | %o2 | argument 2 | return value 2 | + * | %o3 | argument 3 | return value 3 | + * | %o4 | argument 4 | return value 4 | + * ----------------------------------------------- + * + * Registers providing explicit arguments to the hypervisor calls + * are volatile across the call. Upon return their values are + * undefined unless explicitly specified as containing a particular + * return value by the specific call. The return status is always + * returned in register %o0, zero indicates a successful execution of + * the hypervisor call and other values indicate an error status as + * defined below. So, for example, if a hyper-fast trap takes + * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across + * the call and %o3, %o4, and %o5 would be preserved. + * + * If the hypervisor trap is invalid, or the fast trap function number + * is invalid, HV_EBADTRAP will be returned in %o0. Also, all 64-bits + * of the argument and return values are significant. + */ + +/* Trap numbers. */ +#define HV_FAST_TRAP 0x80 +#define HV_MMU_MAP_ADDR_TRAP 0x83 +#define HV_MMU_UNMAP_ADDR_TRAP 0x84 +#define HV_TTRACE_ADDENTRY_TRAP 0x85 +#define HV_CORE_TRAP 0xff + +/* Error codes. */ +#define HV_EOK 0 /* Successful return */ +#define HV_ENOCPU 1 /* Invalid CPU id */ +#define HV_ENORADDR 2 /* Invalid real address */ +#define HV_ENOINTR 3 /* Invalid interrupt id */ +#define HV_EBADPGSZ 4 /* Invalid pagesize encoding */ +#define HV_EBADTSB 5 /* Invalid TSB description */ +#define HV_EINVAL 6 /* Invalid argument */ +#define HV_EBADTRAP 7 /* Invalid function number */ +#define HV_EBADALIGN 8 /* Invalid address alignment */ +#define HV_EWOULDBLOCK 9 /* Cannot complete w/o blocking */ +#define HV_ENOACCESS 10 /* No access to resource */ +#define HV_EIO 11 /* I/O error */ +#define HV_ECPUERROR 12 /* CPU in error state */ +#define HV_ENOTSUPPORTED 13 /* Function not supported */ +#define HV_ENOMAP 14 /* No mapping found */ +#define HV_ETOOMANY 15 /* Too many items specified */ + +/* mach_exit() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_EXIT + * ARG0: exit code + * ERRORS: This service does not return. + * + * Stop all CPUs in the virtual domain and place them into the stopped + * state. The 64-bit exit code may be passed to a service entity as + * the domain's exit status. On systems without a service entity, the + * domain will undergo a reset, and the boot firmware will be + * reloaded. + * + * This function will never return to the guest that invokes it. + * + * Note: By convention an exit code of zero denotes a successful exit by + * the guest code. A non-zero exit code denotes a guest specific + * error indication. + * + */ +#define HV_FAST_MACH_EXIT 0x00 + +/* Domain services. */ + +/* mach_desc() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_DESC + * ARG0: buffer + * ARG1: length + * RET0: status + * RET1: length + * ERRORS: HV_EBADALIGN Buffer is badly aligned + * HV_ENORADDR Buffer is to an illegal real address. + * HV_EINVAL Buffer length is too small for complete + * machine description. + * + * Copy the most current machine description into the buffer indicated + * by the real address in ARG0. The buffer provided must be 16 byte + * aligned. Upon success or HV_EINVAL, this service returns the + * actual size of the machine description in the RET1 return value. + * + * Note: A method of determining the appropriate buffer size for the + * machine description is to first call this service with a buffer + * length of 0 bytes. + */ +#define HV_FAST_MACH_DESC 0x01 + +/* mach_exit() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SIR + * ERRORS: This service does not return. + * + * Perform a software initiated reset of the virtual machine domain. + * All CPUs are captured as soon as possible, all hardware devices are + * returned to the entry default state, and the domain is restarted at + * the SIR (trap type 0x04) real trap table (RTBA) entry point on one + * of the CPUs. The single CPU restarted is selected as determined by + * platform specific policy. Memory is preserved across this + * operation. + */ +#define HV_FAST_MACH_SIR 0x02 + +/* mach_set_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_SET_SOFT_STATE + * ARG0: software state + * ARG1: software state description pointer + * RET0: status + * ERRORS: EINVAL software state not valid or software state + * description is not NULL terminated + * ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * This allows the guest to report it's soft state to the hypervisor. There + * are two primary components to this state. The first part states whether + * the guest software is running or not. The second containts optional + * details specific to the software. + * + * The software state argument is defined below in HV_SOFT_STATE_*, and + * indicates whether the guest is operating normally or in a transitional + * state. + * + * The software state description argument is a real address of a data buffer + * of size 32-bytes aligned on a 32-byte boundary. It is treated as a NULL + * terminated 7-bit ASCII string of up to 31 characters not including the + * NULL termination. + */ +#define HV_FAST_MACH_SET_SOFT_STATE 0x03 +#define HV_SOFT_STATE_NORMAL 0x01 +#define HV_SOFT_STATE_TRANSITION 0x02 + +/* mach_get_soft_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MACH_GET_SOFT_STATE + * ARG0: software state description pointer + * RET0: status + * RET1: software state + * ERRORS: ENORADDR software state description pointer is not a + * valid real address + * EBADALIGNED software state description is not correctly + * aligned + * + * Retrieve the current value of the guest's software state. The rules + * for the software state pointer are the same as for mach_set_soft_state() + * above. + */ +#define HV_FAST_MACH_GET_SOFT_STATE 0x04 + +/* CPU services. + * + * CPUs represent devices that can execute software threads. A single + * chip that contains multiple cores or strands is represented as + * multiple CPUs with unique CPU identifiers. CPUs are exported to + * OBP via the machine description (and to the OS via the OBP device + * tree). CPUs are always in one of three states: stopped, running, + * or error. + * + * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a + * CPU within a logical domain. Operations that are to be performed + * on multiple CPUs specify them via a CPU list. A CPU list is an + * array in real memory, of which each 16-bit word is a CPU ID. CPU + * lists are passed through the API as two arguments. The first is + * the number of entries (16-bit words) in the CPU list, and the + * second is the (real address) pointer to the CPU ID list. + */ + +/* cpu_start() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_START + * ARG0: CPU ID + * ARG1: PC + * ARG1: RTBA + * ARG1: target ARG0 + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is not in the stopped state + * ENORADDR Invalid PC or RTBA real address + * EBADALIGN Unaligned PC or unaligned RTBA + * EWOULDBLOCK Starting resources are not available + * + * Start CPU with given CPU ID with PC in %pc and with a real trap + * base address value of RTBA. The indicated CPU must be in the + * stopped state. The supplied RTBA must be aligned on a 256 byte + * boundary. On successful completion, the specified CPU will be in + * the running state and will be supplied with "target ARG0" in %o0 + * and RTBA in %tba. + */ +#define HV_FAST_CPU_START 0x10 + +/* cpu_stop() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STOP + * ARG0: CPU ID + * RET0: status + * ERRORS: ENOCPU Invalid CPU ID + * EINVAL Target CPU ID is the current cpu + * EINVAL Target CPU ID is not in the running state + * EWOULDBLOCK Stopping resources are not available + * ENOTSUPPORTED Not supported on this platform + * + * The specified CPU is stopped. The indicated CPU must be in the + * running state. On completion, it will be in the stopped state. It + * is not legal to stop the current CPU. + * + * Note: As this service cannot be used to stop the current cpu, this service + * may not be used to stop the last running CPU in a domain. To stop + * and exit a running domain, a guest must use the mach_exit() service. + */ +#define HV_FAST_CPU_STOP 0x11 + +/* cpu_yield() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_YIELD + * RET0: status + * ERRORS: No possible error. + * + * Suspend execution on the current CPU. Execution will resume when + * an interrupt (device, %stick_compare, or cross-call) is targeted to + * the CPU. On some CPUs, this API may be used by the hypervisor to + * save power by disabling hardware strands. + */ +#define HV_FAST_CPU_YIELD 0x12 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_yield(void); +#endif + +/* cpu_qconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QCONF + * ARG0: queue + * ARG1: base real address + * ARG2: number of entries + * RET0: status + * ERRORS: ENORADDR Invalid base real address + * EINVAL Invalid queue or number of entries is less + * than 2 or too large. + * EBADALIGN Base real address is not correctly aligned + * for size. + * + * Configure the given queue to be placed at the given base real + * address, with the given number of entries. The number of entries + * must be a power of 2. The base real address must be aligned + * exactly to match the queue size. Each queue entry is 64 bytes + * long, so for example a 32 entry queue must be aligned on a 2048 + * byte real address boundary. + * + * The specified queue is unconfigured if the number of entries is given + * as zero. + * + * For the current version of this API service, the argument queue is defined + * as follows: + * + * queue description + * ----- ------------------------- + * 0x3c cpu mondo queue + * 0x3d device mondo queue + * 0x3e resumable error queue + * 0x3f non-resumable error queue + * + * Note: The maximum number of entries for each queue for a specific cpu may + * be determined from the machine description. + */ +#define HV_FAST_CPU_QCONF 0x14 +#define HV_CPU_QUEUE_CPU_MONDO 0x3c +#define HV_CPU_QUEUE_DEVICE_MONDO 0x3d +#define HV_CPU_QUEUE_RES_ERROR 0x3e +#define HV_CPU_QUEUE_NONRES_ERROR 0x3f + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_qconf(unsigned long type, + unsigned long queue_paddr, + unsigned long num_queue_entries); +#endif + +/* cpu_qinfo() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_QINFO + * ARG0: queue + * RET0: status + * RET1: base real address + * RET1: number of entries + * ERRORS: EINVAL Invalid queue + * + * Return the configuration info for the given queue. The base real + * address and number of entries of the defined queue are returned. + * The queue argument values are the same as for cpu_qconf() above. + * + * If the specified queue is a valid queue number, but no queue has + * been defined, the number of entries will be set to zero and the + * base real address returned is undefined. + */ +#define HV_FAST_CPU_QINFO 0x15 + +/* cpu_mondo_send() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MONDO_SEND + * ARG0-1: CPU list + * ARG2: data real address + * RET0: status + * ERRORS: EBADALIGN Mondo data is not 64-byte aligned or CPU list + * is not 2-byte aligned. + * ENORADDR Invalid data mondo address, or invalid cpu list + * address. + * ENOCPU Invalid cpu in CPU list + * EWOULDBLOCK Some or all of the listed CPUs did not receive + * the mondo + * ECPUERROR One or more of the listed CPUs are in error + * state, use HV_FAST_CPU_STATE to see which ones + * EINVAL CPU list includes caller's CPU ID + * + * Send a mondo interrupt to the CPUs in the given CPU list with the + * 64-bytes at the given data real address. The data must be 64-byte + * aligned. The mondo data will be delivered to the cpu_mondo queues + * of the recipient CPUs. + * + * In all cases, error or not, the CPUs in the CPU list to which the + * mondo has been successfully delivered will be indicated by having + * their entry in CPU list updated with the value 0xffff. + */ +#define HV_FAST_CPU_MONDO_SEND 0x42 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa); +#endif + +/* cpu_myid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_MYID + * RET0: status + * RET1: CPU ID + * ERRORS: No errors defined. + * + * Return the hypervisor ID handle for the current CPU. Use by a + * virtual CPU to discover it's own identity. + */ +#define HV_FAST_CPU_MYID 0x16 + +/* cpu_state() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_STATE + * ARG0: CPU ID + * RET0: status + * RET1: state + * ERRORS: ENOCPU Invalid CPU ID + * + * Retrieve the current state of the CPU with the given CPU ID. + */ +#define HV_FAST_CPU_STATE 0x17 +#define HV_CPU_STATE_STOPPED 0x01 +#define HV_CPU_STATE_RUNNING 0x02 +#define HV_CPU_STATE_ERROR 0x03 + +#ifndef __ASSEMBLY__ +extern long sun4v_cpu_state(unsigned long cpuid); +#endif + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_SET_RTBA + * ARG0: RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: ENORADDR Invalid RTBA real address + * EBADALIGN RTBA is incorrectly aligned for a trap table + * + * Set the real trap base address of the local cpu to the given RTBA. + * The supplied RTBA must be aligned on a 256 byte boundary. Upon + * success the previous value of the RTBA is returned in RET1. + * + * Note: This service does not affect %tba + */ +#define HV_FAST_CPU_SET_RTBA 0x18 + +/* cpu_set_rtba() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CPU_GET_RTBA + * RET0: status + * RET1: previous RTBA + * ERRORS: No possible error. + * + * Returns the current value of RTBA in RET1. + */ +#define HV_FAST_CPU_GET_RTBA 0x19 + +/* MMU services. + * + * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls. + */ +#ifndef __ASSEMBLY__ +struct hv_tsb_descr { + unsigned short pgsz_idx; + unsigned short assoc; + unsigned int num_ttes; /* in TTEs */ + unsigned int ctx_idx; + unsigned int pgsz_mask; + unsigned long tsb_base; + unsigned long resv; +}; +#endif +#define HV_TSB_DESCR_PGSZ_IDX_OFFSET 0x00 +#define HV_TSB_DESCR_ASSOC_OFFSET 0x02 +#define HV_TSB_DESCR_NUM_TTES_OFFSET 0x04 +#define HV_TSB_DESCR_CTX_IDX_OFFSET 0x08 +#define HV_TSB_DESCR_PGSZ_MASK_OFFSET 0x0c +#define HV_TSB_DESCR_TSB_BASE_OFFSET 0x10 +#define HV_TSB_DESCR_RESV_OFFSET 0x18 + +/* Page size bitmask. */ +#define HV_PGSZ_MASK_8K (1 << 0) +#define HV_PGSZ_MASK_64K (1 << 1) +#define HV_PGSZ_MASK_512K (1 << 2) +#define HV_PGSZ_MASK_4MB (1 << 3) +#define HV_PGSZ_MASK_32MB (1 << 4) +#define HV_PGSZ_MASK_256MB (1 << 5) +#define HV_PGSZ_MASK_2GB (1 << 6) +#define HV_PGSZ_MASK_16GB (1 << 7) + +/* Page size index. The value given in the TSB descriptor must correspond + * to the smallest page size specified in the pgsz_mask page size bitmask. + */ +#define HV_PGSZ_IDX_8K 0 +#define HV_PGSZ_IDX_64K 1 +#define HV_PGSZ_IDX_512K 2 +#define HV_PGSZ_IDX_4MB 3 +#define HV_PGSZ_IDX_32MB 4 +#define HV_PGSZ_IDX_256MB 5 +#define HV_PGSZ_IDX_2GB 6 +#define HV_PGSZ_IDX_16GB 7 + +/* MMU fault status area. + * + * MMU related faults have their status and fault address information + * placed into a memory region made available by privileged code. Each + * virtual processor must make a mmu_fault_area_conf() call to tell the + * hypervisor where that processor's fault status should be stored. + * + * The fault status block is a multiple of 64-bytes and must be aligned + * on a 64-byte boundary. + */ +#ifndef __ASSEMBLY__ +struct hv_fault_status { + unsigned long i_fault_type; + unsigned long i_fault_addr; + unsigned long i_fault_ctx; + unsigned long i_reserved[5]; + unsigned long d_fault_type; + unsigned long d_fault_addr; + unsigned long d_fault_ctx; + unsigned long d_reserved[5]; +}; +#endif +#define HV_FAULT_I_TYPE_OFFSET 0x00 +#define HV_FAULT_I_ADDR_OFFSET 0x08 +#define HV_FAULT_I_CTX_OFFSET 0x10 +#define HV_FAULT_D_TYPE_OFFSET 0x40 +#define HV_FAULT_D_ADDR_OFFSET 0x48 +#define HV_FAULT_D_CTX_OFFSET 0x50 + +#define HV_FAULT_TYPE_FAST_MISS 1 +#define HV_FAULT_TYPE_FAST_PROT 2 +#define HV_FAULT_TYPE_MMU_MISS 3 +#define HV_FAULT_TYPE_INV_RA 4 +#define HV_FAULT_TYPE_PRIV_VIOL 5 +#define HV_FAULT_TYPE_PROT_VIOL 6 +#define HV_FAULT_TYPE_NFO 7 +#define HV_FAULT_TYPE_NFO_SEFF 8 +#define HV_FAULT_TYPE_INV_VA 9 +#define HV_FAULT_TYPE_INV_ASI 10 +#define HV_FAULT_TYPE_NC_ATOMIC 11 +#define HV_FAULT_TYPE_PRIV_ACT 12 +#define HV_FAULT_TYPE_RESV1 13 +#define HV_FAULT_TYPE_UNALIGNED 14 +#define HV_FAULT_TYPE_INV_PGSZ 15 +/* Values 16 --> -2 are reserved. */ +#define HV_FAULT_TYPE_MULTIPLE -1 + +/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(), + * and mmu_{map,unmap}_perm_addr(). + */ +#define HV_MMU_DMMU 0x01 +#define HV_MMU_IMMU 0x02 +#define HV_MMU_ALL (HV_MMU_DMMU | HV_MMU_IMMU) + +/* mmu_map_addr() + * TRAP: HV_MMU_MAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * + * Create a non-permanent mapping using the given TTE, virtual + * address, and mmu context. The flags argument determines which + * (data, or instruction, or both) TLB the mapping gets loaded into. + * + * The behavior is undefined if the valid bit is clear in the TTE. + * + * Note: This API call is for privileged code to specify temporary translation + * mappings without the need to create and manage a TSB. + */ + +/* mmu_unmap_addr() + * TRAP: HV_MMU_UNMAP_ADDR_TRAP + * ARG0: virtual address + * ARG1: mmu context + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * ERRORS: EINVAL Invalid virtual address, mmu context, or flags + * + * Demaps the given virtual address in the given mmu context on this + * CPU. This function is intended to be used to demap pages mapped + * with mmu_map_addr. This service is equivalent to invoking + * mmu_demap_page() with only the current CPU in the CPU list. The + * flags argument determines which (data, or instruction, or both) TLB + * the mapping gets unmapped from. + * + * Attempting to perform an unmap operation for a previously defined + * permanent mapping will have undefined results. + */ + +/* mmu_tsb_ctx0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: ENORADDR Invalid TSB descriptions pointer or + * TSB base within a descriptor + * EBADALIGN TSB descriptions pointer is not aligned + * to an 8-byte boundary, or TSB base + * within a descriptor is not aligned for + * the given TSB size + * EBADPGSZ Invalid page size in a TSB descriptor + * EBADTSB Invalid associativity or size in a TSB + * descriptor + * EINVAL Invalid number of TSB descriptions, or + * invalid context index in a TSB + * descriptor, or index page size not + * equal to smallest page size in page + * size bitmask field. + * + * Configures the TSBs for the current CPU for virtual addresses with + * context zero. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: The maximum number of TSBs available to a virtual CPU is given by the + * mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the + * machine description. + */ +#define HV_FAST_MMU_TSB_CTX0 0x20 + +/* mmu_tsb_ctxnon0() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0 + * ARG0: number of TSB descriptions + * ARG1: TSB descriptions pointer + * RET0: status + * ERRORS: Same as for mmu_tsb_ctx0() above. + * + * Configures the TSBs for the current CPU for virtual addresses with + * non-zero contexts. The TSB descriptions pointer is a pointer to an + * array of the given number of TSB descriptions. + * + * Note: A maximum of 16 TSBs may be specified in the TSB description list. + */ +#define HV_FAST_MMU_TSB_CTXNON0 0x21 + +/* mmu_demap_page() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_PAGE + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: virtual address + * ARG3: mmu context + * ARG4: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address, context, or + * flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps any page mapping of the given virtual address in the given + * mmu context for the current virtual CPU. Any virtually tagged + * caches are guaranteed to be kept consistent. The flags argument + * determines which TLB (instruction, or data, or both) participate in + * the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_PAGE 0x22 + +/* mmu_demap_ctx() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_CTX + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: mmu context + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid context or flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the given context for the current virtual CPU. Any virtual + * tagged caches are guaranteed to be kept consistent. The flags + * argument determines which TLB (instruction, or data, or both) + * participate in the operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_CTX 0x23 + +/* mmu_demap_all() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_DEMAP_ALL + * ARG0: reserved, must be zero + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid flags value + * ENOTSUPPORTED ARG0 or ARG1 is non-zero + * + * Demaps all non-permanent virtual page mappings previously specified + * for the current virtual CPU. Any virtual tagged caches are + * guaranteed to be kept consistent. The flags argument determines + * which TLB (instruction, or data, or both) participate in the + * operation. + * + * ARG0 and ARG1 are both reserved and must be set to zero. + */ +#define HV_FAST_MMU_DEMAP_ALL 0x24 + +/* mmu_map_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_MAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: TTE + * ARG3: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * EBADPGSZ Invalid page size value + * ENORADDR Invalid real address in TTE + * ETOOMANY Too many mappings (max of 8 reached) + * + * Create a permanent mapping using the given TTE and virtual address + * for context 0 on the calling virtual CPU. A maximum of 8 such + * permanent mappings may be specified by privileged code. Mappings + * may be removed with mmu_unmap_perm_addr(). + * + * The behavior is undefined if a TTE with the valid bit clear is given. + * + * Note: This call is used to specify address space mappings for which + * privileged code does not expect to receive misses. For example, + * this mechanism can be used to map kernel nucleus code and data. + */ +#define HV_FAST_MMU_MAP_PERM_ADDR 0x25 + +/* mmu_fault_area_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_CONF + * ARG0: real address + * RET0: status + * RET1: previous mmu fault area real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Invalid alignment for fault area + * + * Configure the MMU fault status area for the calling CPU. A 64-byte + * aligned real address specifies where MMU fault status information + * is placed. The return value is the previously specified area, or 0 + * for the first invocation. Specifying a fault area at real address + * 0 is not allowed. + */ +#define HV_FAST_MMU_FAULT_AREA_CONF 0x26 + +/* mmu_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_ENABLE + * ARG0: enable flag + * ARG1: return target address + * RET0: status + * ERRORS: ENORADDR Invalid real address when disabling + * translation. + * EBADALIGN The return target address is not + * aligned to an instruction. + * EINVAL The enable flag request the current + * operating mode (e.g. disable if already + * disabled) + * + * Enable or disable virtual address translation for the calling CPU + * within the virtual machine domain. If the enable flag is zero, + * translation is disabled, any non-zero value will enable + * translation. + * + * When this function returns, the newly selected translation mode + * will be active. If the mmu is being enabled, then the return + * target address is a virtual address else it is a real address. + * + * Upon successful completion, control will be returned to the given + * return target address (ie. the cpu will jump to that address). On + * failure, the previous mmu mode remains and the trap simply returns + * as normal with the appropriate error code in RET0. + */ +#define HV_FAST_MMU_ENABLE 0x27 + +/* mmu_unmap_perm_addr() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_UNMAP_PERM_ADDR + * ARG0: virtual address + * ARG1: reserved, must be zero + * ARG2: flags (HV_MMU_{IMMU,DMMU}) + * RET0: status + * ERRORS: EINVAL Invalid virutal address or flags value + * ENOMAP Specified mapping was not found + * + * Demaps any permanent page mapping (established via + * mmu_map_perm_addr()) at the given virtual address for context 0 on + * the current virtual CPU. Any virtual tagged caches are guaranteed + * to be kept consistent. + */ +#define HV_FAST_MMU_UNMAP_PERM_ADDR 0x28 + +/* mmu_tsb_ctx0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTX0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by mmu_tsb_ctx0() + * into the provided buffer. The size of the buffer is given in ARG1 + * in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTX0_INFO 0x29 + +/* mmu_tsb_ctxnon0_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_TSB_CTXNON0_INFO + * ARG0: max TSBs + * ARG1: buffer pointer + * RET0: status + * RET1: number of TSBs + * ERRORS: EINVAL Supplied buffer is too small + * EBADALIGN The buffer pointer is badly aligned + * ENORADDR Invalid real address for buffer pointer + * + * Return the TSB configuration as previous defined by + * mmu_tsb_ctxnon0() into the provided buffer. The size of the buffer + * is given in ARG1 in terms of the number of TSB description entries. + * + * Upon return, RET1 always contains the number of TSB descriptions + * previously configured. If zero TSBs were configured, EOK is + * returned with RET1 containing 0. + */ +#define HV_FAST_MMU_TSB_CTXNON0_INFO 0x2a + +/* mmu_fault_area_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMU_FAULT_AREA_INFO + * RET0: status + * RET1: fault area real address + * ERRORS: No errors defined. + * + * Return the currently defined MMU fault status area for the current + * CPU. The real address of the fault status area is returned in + * RET1, or 0 is returned in RET1 if no fault status area is defined. + * + * Note: mmu_fault_area_conf() may be called with the return value (RET1) + * from this service if there is a need to save and restore the fault + * area for a cpu. + */ +#define HV_FAST_MMU_FAULT_AREA_INFO 0x2b + +/* Cache and Memory services. */ + +/* mem_scrub() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SCRUB + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length scrubbed + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Zero the memory contents in the range real address to real address + * plus length minus 1. Also, valid ECC will be generated for that + * memory address range. Scrubbing is started at the given real + * address, but may not scrub the entire given length. The actual + * length scrubbed will be returned in RET1. + * + * The real address and length must be aligned on an 8K boundary, or + * contain the start address and length from a sun4v error report. + * + * Note: There are two uses for this function. The first use is to block clear + * and initialize memory and the second is to scrub an u ncorrectable + * error reported via a resumable or non-resumable trap. The second + * use requires the arguments to be equal to the real address and length + * provided in a sun4v memory error report. + */ +#define HV_FAST_MEM_SCRUB 0x31 + +/* mem_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MEM_SYNC + * ARG0: real address + * ARG1: length + * RET0: status + * RET1: length synced + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Start address or length are not correctly + * aligned + * EINVAL Length is zero + * + * Force the next access within the real address to real address plus + * length minus 1 to be fetches from main system memory. Less than + * the given length may be synced, the actual amount synced is + * returned in RET1. The real address and length must be aligned on + * an 8K boundary. + */ +#define HV_FAST_MEM_SYNC 0x32 + +/* Time of day services. + * + * The hypervisor maintains the time of day on a per-domain basis. + * Changing the time of day in one domain does not affect the time of + * day on any other domain. + * + * Time is described by a single unsigned 64-bit word which is the + * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1, + * 1970). + */ + +/* tod_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_GET + * RET0: status + * RET1: TOD + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * Return the current time of day. May block if TOD access is + * temporarily not possible. + */ +#define HV_FAST_TOD_GET 0x50 + +/* tod_set() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TOD_SET + * ARG0: TOD + * RET0: status + * ERRORS: EWOULDBLOCK TOD resource is temporarily unavailable + * ENOTSUPPORTED If TOD not supported on this platform + * + * The current time of day is set to the value specified in ARG0. May + * block if TOD access is temporarily not possible. + */ +#define HV_FAST_TOD_SET 0x51 + +/* Console services */ + +/* con_getchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_GETCHAR + * RET0: status + * RET1: character + * ERRORS: EWOULDBLOCK No character available. + * + * Returns a character from the console device. If no character is + * available then an EWOULDBLOCK error is returned. If a character is + * available, then the returned status is EOK and the character value + * is in RET1. + * + * A virtual BREAK is represented by the 64-bit value -1. + * + * A virtual HUP signal is represented by the 64-bit value -2. + */ +#define HV_FAST_CONS_GETCHAR 0x60 + +/* con_putchar() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_CONS_PUTCHAR + * ARG0: character + * RET0: status + * ERRORS: EINVAL Illegal character + * EWOULDBLOCK Output buffer currently full, would block + * + * Send a character to the console device. Only character values + * between 0 and 255 may be used. Values outside this range are + * invalid except for the 64-bit value -1 which is used to send a + * virtual BREAK. + */ +#define HV_FAST_CONS_PUTCHAR 0x61 + +/* Trap trace services. + * + * The hypervisor provides a trap tracing capability for privileged + * code running on each virtual CPU. Privileged code provides a + * round-robin trap trace queue within which the hypervisor writes + * 64-byte entries detailing hyperprivileged traps taken n behalf of + * privileged code. This is provided as a debugging capability for + * privileged code. + * + * The trap trace control structure is 64-bytes long and placed at the + * start (offset 0) of the trap trace buffer, and is described as + * follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_control { + unsigned long head_offset; + unsigned long tail_offset; + unsigned long __reserved[0x30 / sizeof(unsigned long)]; +}; +#endif +#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET 0x00 +#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET 0x08 + +/* The head offset is the offset of the most recently completed entry + * in the trap-trace buffer. The tail offset is the offset of the + * next entry to be written. The control structure is owned and + * modified by the hypervisor. A guest may not modify the control + * structure contents. Attempts to do so will result in undefined + * behavior for the guest. + * + * Each trap trace buffer entry is layed out as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_trap_trace_entry { + unsigned char type; /* Hypervisor or guest entry? */ + unsigned char hpstate; /* Hyper-privileged state */ + unsigned char tl; /* Trap level */ + unsigned char gl; /* Global register level */ + unsigned short tt; /* Trap type */ + unsigned short tag; /* Extended trap identifier */ + unsigned long tstate; /* Trap state */ + unsigned long tick; /* Tick */ + unsigned long tpc; /* Trap PC */ + unsigned long f1; /* Entry specific */ + unsigned long f2; /* Entry specific */ + unsigned long f3; /* Entry specific */ + unsigned long f4; /* Entry specific */ +}; +#endif +#define HV_TRAP_TRACE_ENTRY_TYPE 0x00 +#define HV_TRAP_TRACE_ENTRY_HPSTATE 0x01 +#define HV_TRAP_TRACE_ENTRY_TL 0x02 +#define HV_TRAP_TRACE_ENTRY_GL 0x03 +#define HV_TRAP_TRACE_ENTRY_TT 0x04 +#define HV_TRAP_TRACE_ENTRY_TAG 0x06 +#define HV_TRAP_TRACE_ENTRY_TSTATE 0x08 +#define HV_TRAP_TRACE_ENTRY_TICK 0x10 +#define HV_TRAP_TRACE_ENTRY_TPC 0x18 +#define HV_TRAP_TRACE_ENTRY_F1 0x20 +#define HV_TRAP_TRACE_ENTRY_F2 0x28 +#define HV_TRAP_TRACE_ENTRY_F3 0x30 +#define HV_TRAP_TRACE_ENTRY_F4 0x38 + +/* The type field is encoded as follows. */ +#define HV_TRAP_TYPE_UNDEF 0x00 /* Entry content undefined */ +#define HV_TRAP_TYPE_HV 0x01 /* Hypervisor trap entry */ +#define HV_TRAP_TYPE_GUEST 0xff /* Added via ttrace_addentry() */ + +/* ttrace_buf_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_CONF + * ARG0: real address + * ARG1: number of entries + * RET0: status + * RET1: number of entries + * ERRORS: ENORADDR Invalid real address + * EINVAL Size is too small + * EBADALIGN Real address not aligned on 64-byte boundary + * + * Requests hypervisor trap tracing and declares a virtual CPU's trap + * trace buffer to the hypervisor. The real address supplies the real + * base address of the trap trace queue and must be 64-byte aligned. + * Specifying a value of 0 for the number of entries disables trap + * tracing for the calling virtual CPU. The buffer allocated must be + * sized for a power of two number of 64-byte trap trace entries plus + * an initial 64-byte control structure. + * + * This may be invoked any number of times so that a virtual CPU may + * relocate a trap trace buffer or create "snapshots" of information. + * + * If the real address is illegal or badly aligned, then trap tracing + * is disabled and an error is returned. + * + * Upon failure with EINVAL, this service call returns in RET1 the + * minimum number of buffer entries required. Upon other failures + * RET1 is undefined. + */ +#define HV_FAST_TTRACE_BUF_CONF 0x90 + +/* ttrace_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_BUF_INFO + * RET0: status + * RET1: real address + * RET2: size + * ERRORS: None defined. + * + * Returns the size and location of the previously declared trap-trace + * buffer. In the event that no buffer was previously defined, or the + * buffer is disabled, this call will return a size of zero bytes. + */ +#define HV_FAST_TTRACE_BUF_INFO 0x91 + +/* ttrace_enable() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_ENABLE + * ARG0: enable + * RET0: status + * RET1: previous enable state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Enable or disable trap tracing, and return the previous enabled + * state in RET1. Future systems may define various flags for the + * enable argument (ARG0), for the moment a guest should pass + * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all + * tracing - which will ensure future compatability. + */ +#define HV_FAST_TTRACE_ENABLE 0x92 + +/* ttrace_freeze() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_TTRACE_FREEZE + * ARG0: freeze + * RET0: status + * RET1: previous freeze state + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Freeze or unfreeze trap tracing, returning the previous freeze + * state in RET1. A guest should pass a non-zero value to freeze and + * a zero value to unfreeze all tracing. The returned previous state + * is 0 for not frozen and 1 for frozen. + */ +#define HV_FAST_TTRACE_FREEZE 0x93 + +/* ttrace_addentry() + * TRAP: HV_TTRACE_ADDENTRY_TRAP + * ARG0: tag (16-bits) + * ARG1: data word 0 + * ARG2: data word 1 + * ARG3: data word 2 + * ARG4: data word 3 + * RET0: status + * ERRORS: EINVAL No trap trace buffer currently defined + * + * Add an entry to the trap trace buffer. Upon return only ARG0/RET0 + * is modified - none of the other registers holding arguments are + * volatile across this hypervisor service. + */ + +/* Core dump services. + * + * Since the hypervisor viraulizes and thus obscures a lot of the + * physical machine layout and state, traditional OS crash dumps can + * be difficult to diagnose especially when the problem is a + * configuration error of some sort. + * + * The dump services provide an opaque buffer into which the + * hypervisor can place it's internal state in order to assist in + * debugging such situations. The contents are opaque and extremely + * platform and hypervisor implementation specific. The guest, during + * a core dump, requests that the hypervisor update any information in + * the dump buffer in preparation to being dumped as part of the + * domain's memory image. + */ + +/* dump_buf_update() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_UPDATE + * ARG0: real address + * ARG1: size + * RET0: status + * RET1: required size of dump buffer + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address is not aligned on a 64-byte + * boundary + * EINVAL Size is non-zero but less than minimum size + * required + * ENOTSUPPORTED Operation not supported on current logical + * domain + * + * Declare a domain dump buffer to the hypervisor. The real address + * provided for the domain dump buffer must be 64-byte aligned. The + * size specifies the size of the dump buffer and may be larger than + * the minimum size specified in the machine description. The + * hypervisor will fill the dump buffer with opaque data. + * + * Note: A guest may elect to include dump buffer contents as part of a crash + * dump to assist with debugging. This function may be called any number + * of times so that a guest may relocate a dump buffer, or create + * "snapshots" of any dump-buffer information. Each call to + * dump_buf_update() atomically declares the new dump buffer to the + * hypervisor. + * + * A specified size of 0 unconfigures the dump buffer. If the real + * address is illegal or badly aligned, then any currently active dump + * buffer is disabled and an error is returned. + * + * In the event that the call fails with EINVAL, RET1 contains the + * minimum size requires by the hypervisor for a valid dump buffer. + */ +#define HV_FAST_DUMP_BUF_UPDATE 0x94 + +/* dump_buf_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_DUMP_BUF_INFO + * RET0: status + * RET1: real address of current dump buffer + * RET2: size of current dump buffer + * ERRORS: No errors defined. + * + * Return the currently configures dump buffer description. A + * returned size of 0 bytes indicates an undefined dump buffer. In + * this case the return address in RET1 is undefined. + */ +#define HV_FAST_DUMP_BUF_INFO 0x95 + +/* Device interrupt services. + * + * Device interrupts are allocated to system bus bridges by the hypervisor, + * and described to OBP in the machine description. OBP then describes + * these interrupts to the OS via properties in the device tree. + * + * Terminology: + * + * cpuid Unique opaque value which represents a target cpu. + * + * devhandle Device handle. It uniquely identifies a device, and + * consistes of the lower 28-bits of the hi-cell of the + * first entry of the device's "reg" property in the + * OBP device tree. + * + * devino Device interrupt number. Specifies the relative + * interrupt number within the device. The unique + * combination of devhandle and devino are used to + * identify a specific device interrupt. + * + * Note: The devino value is the same as the values in the + * "interrupts" property or "interrupt-map" property + * in the OBP device tree for that device. + * + * sysino System interrupt number. A 64-bit unsigned interger + * representing a unique interrupt within a virtual + * machine. + * + * intr_state A flag representing the interrupt state for a given + * sysino. The state values are defined below. + * + * intr_enabled A flag representing the 'enabled' state for a given + * sysino. The enable values are defined below. + */ + +#define HV_INTR_STATE_IDLE 0 /* Nothing pending */ +#define HV_INTR_STATE_RECEIVED 1 /* Interrupt received by hardware */ +#define HV_INTR_STATE_DELIVERED 2 /* Interrupt delivered to queue */ + +#define HV_INTR_DISABLED 0 /* sysino not enabled */ +#define HV_INTR_ENABLED 1 /* sysino enabled */ + +/* intr_devino_to_sysino() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_DEVINO2SYSINO + * ARG0: devhandle + * ARG1: devino + * RET0: status + * RET1: sysino + * ERRORS: EINVAL Invalid devhandle/devino + * + * Converts a device specific interrupt number of the given + * devhandle/devino into a system specific ino (sysino). + */ +#define HV_FAST_INTR_DEVINO2SYSINO 0xa0 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle, + unsigned long devino); +#endif + +/* intr_getenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETENABLED + * ARG0: sysino + * RET0: status + * RET1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * ERRORS: EINVAL Invalid sysino + * + * Returns interrupt enabled state in RET1 for the interrupt defined + * by the given sysino. + */ +#define HV_FAST_INTR_GETENABLED 0xa1 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getenabled(unsigned long sysino); +#endif + +/* intr_setenabled() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETENABLED + * ARG0: sysino + * ARG1: intr_enabled (HV_INTR_{DISABLED,ENABLED}) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_enabled value + * + * Set the 'enabled' state of the interrupt sysino. + */ +#define HV_FAST_INTR_SETENABLED 0xa2 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled); +#endif + +/* intr_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETSTATE + * ARG0: sysino + * RET0: status + * RET1: intr_state (HV_INTR_STATE_*) + * ERRORS: EINVAL Invalid sysino + * + * Returns current state of the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_GETSTATE 0xa3 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_getstate(unsigned long sysino); +#endif + +/* intr_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETSTATE + * ARG0: sysino + * ARG1: intr_state (HV_INTR_STATE_*) + * RET0: status + * ERRORS: EINVAL Invalid sysino or intr_state value + * + * Sets the current state of the interrupt described by the given sysino + * value. + * + * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending + * interrupt for sysino. + */ +#define HV_FAST_INTR_SETSTATE 0xa4 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state); +#endif + +/* intr_gettarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_GETTARGET + * ARG0: sysino + * RET0: status + * RET1: cpuid + * ERRORS: EINVAL Invalid sysino + * + * Returns CPU that is the current target of the interrupt defined by + * the given sysino. The CPU value returned is undefined if the target + * has not been set via intr_settarget(). + */ +#define HV_FAST_INTR_GETTARGET 0xa5 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_gettarget(unsigned long sysino); +#endif + +/* intr_settarget() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_INTR_SETTARGET + * ARG0: sysino + * ARG1: cpuid + * RET0: status + * ERRORS: EINVAL Invalid sysino + * ENOCPU Invalid cpuid + * + * Set the target CPU for the interrupt defined by the given sysino. + */ +#define HV_FAST_INTR_SETTARGET 0xa6 + +#ifndef __ASSEMBLY__ +extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid); +#endif + +/* PCI IO services. + * + * See the terminology descriptions in the device interrupt services + * section above as those apply here too. Here are terminology + * definitions specific to these PCI IO services: + * + * tsbnum TSB number. Indentifies which io-tsb is used. + * For this version of the specification, tsbnum + * must be zero. + * + * tsbindex TSB index. Identifies which entry in the TSB + * is used. The first entry is zero. + * + * tsbid A 64-bit aligned data structure which contains + * a tsbnum and a tsbindex. Bits 63:32 contain the + * tsbnum and bits 31:00 contain the tsbindex. + * + * Use the HV_PCI_TSBID() macro to construct such + * values. + * + * io_attributes IO attributes for IOMMU mappings. One of more + * of the attritbute bits are stores in a 64-bit + * value. The values are defined below. + * + * r_addr 64-bit real address + * + * pci_device PCI device address. A PCI device address identifies + * a specific device on a specific PCI bus segment. + * A PCI device address ia a 32-bit unsigned integer + * with the following format: + * + * 00000000.bbbbbbbb.dddddfff.00000000 + * + * Use the HV_PCI_DEVICE_BUILD() macro to construct + * such values. + * + * pci_config_offset + * PCI configureation space offset. For conventional + * PCI a value between 0 and 255. For extended + * configuration space, a value between 0 and 4095. + * + * Note: For PCI configuration space accesses, the offset + * must be aligned to the access size. + * + * error_flag A return value which specifies if the action succeeded + * or failed. 0 means no error, non-0 means some error + * occurred while performing the service. + * + * io_sync_direction + * Direction definition for pci_dma_sync(), defined + * below in HV_PCI_SYNC_*. + * + * io_page_list A list of io_page_addresses, an io_page_address is + * a real address. + * + * io_page_list_p A pointer to an io_page_list. + * + * "size based byte swap" - Some functions do size based byte swapping + * which allows sw to access pointers and + * counters in native form when the processor + * operates in a different endianness than the + * IO bus. Size-based byte swapping converts a + * multi-byte field between big-endian and + * little-endian format. + */ + +#define HV_PCI_MAP_ATTR_READ 0x01 +#define HV_PCI_MAP_ATTR_WRITE 0x02 + +#define HV_PCI_DEVICE_BUILD(b,d,f) \ + ((((b) & 0xff) << 16) | \ + (((d) & 0x1f) << 11) | \ + (((f) & 0x07) << 8)) + +#define HV_PCI_TSBID(__tsb_num, __tsb_index) \ + ((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index))) + +#define HV_PCI_SYNC_FOR_DEVICE 0x01 +#define HV_PCI_SYNC_FOR_CPU 0x02 + +/* pci_iommu_map() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_MAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * ARG3: io_attributes + * ARG4: io_page_list_p + * RET0: status + * RET1: #ttes mapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex/io_attributes + * EBADALIGN Improperly aligned real address + * ENORADDR Invalid real address + * + * Create IOMMU mappings in the sun4v device defined by the given + * devhandle. The mappings are created in the TSB defined by the + * tsbnum component of the given tsbid. The first mapping is created + * in the TSB i ndex defined by the tsbindex component of the given tsbid. + * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex, + * the second at tsbnum, tsbindex + 1, etc. + * + * All mappings are created with the attributes defined by the io_attributes + * argument. The page mapping addresses are described in the io_page_list + * defined by the given io_page_list_p, which is a pointer to the io_page_list. + * The first entry in the io_page_list is the address for the first iotte, the + * 2nd for the 2nd iotte, and so on. + * + * Each io_page_address in the io_page_list must be appropriately aligned. + * #ttes must be greater than zero. For this version of the spec, the tsbnum + * component of the given tsbid must be zero. + * + * Returns the actual number of mappings creates, which may be less than + * or equal to the argument #ttes. If the function returns a value which + * is less than the #ttes, the caller may continus to call the function with + * an updated tsbid, #ttes, io_page_list_p arguments until all pages are + * mapped. + * + * Note: This function does not imply an iotte cache flush. The guest must + * demap an entry before re-mapping it. + */ +#define HV_FAST_PCI_IOMMU_MAP 0xb0 + +/* pci_iommu_demap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_DEMAP + * ARG0: devhandle + * ARG1: tsbid + * ARG2: #ttes + * RET0: status + * RET1: #ttes demapped + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * + * Demap and flush IOMMU mappings in the device defined by the given + * devhandle. Demaps up to #ttes entries in the TSB defined by the tsbnum + * component of the given tsbid, starting at the TSB index defined by the + * tsbindex component of the given tsbid. + * + * For this version of the spec, the tsbnum of the given tsbid must be zero. + * #ttes must be greater than zero. + * + * Returns the actual number of ttes demapped, which may be less than or equal + * to the argument #ttes. If #ttes demapped is less than #ttes, the caller + * may continue to call this function with updated tsbid and #ttes arguments + * until all pages are demapped. + * + * Note: Entries do not have to be mapped to be demapped. A demap of an + * unmapped page will flush the entry from the tte cache. + */ +#define HV_FAST_PCI_IOMMU_DEMAP 0xb1 + +/* pci_iommu_getmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETMAP + * ARG0: devhandle + * ARG1: tsbid + * RET0: status + * RET1: io_attributes + * RET2: real address + * ERRORS: EINVAL Invalid devhandle/tsbnum/tsbindex + * ENOMAP Mapping is not valid, no translation exists + * + * Read and return the mapping in the device described by the given devhandle + * and tsbid. If successful, the io_attributes shall be returned in RET1 + * and the page address of the mapping shall be returned in RET2. + * + * For this version of the spec, the tsbnum component of the given tsbid + * must be zero. + */ +#define HV_FAST_PCI_IOMMU_GETMAP 0xb2 + +/* pci_iommu_getbypass() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOMMU_GETBYPASS + * ARG0: devhandle + * ARG1: real address + * ARG2: io_attributes + * RET0: status + * RET1: io_addr + * ERRORS: EINVAL Invalid devhandle/io_attributes + * ENORADDR Invalid real address + * ENOTSUPPORTED Function not supported in this implementation. + * + * Create a "special" mapping in the device described by the given devhandle, + * for the given real address and attributes. Return the IO address in RET1 + * if successful. + */ +#define HV_FAST_PCI_IOMMU_GETBYPASS 0xb3 + +/* pci_config_get() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_GET + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Read PCI configuration space for the adapter described by the given + * devhandle. Read size (1, 2, or 4) bytes of data from the given + * pci_device, at pci_config_offset from the beginning of the device's + * configuration space. If there was no error, RET1 is set to zero and + * RET2 is set to the data read. Insignificant bits in RET2 are not + * guarenteed to have any specific value and therefore must be ignored. + * + * The data returned in RET2 is size based byte swapped. + * + * If an error occurs during the read, set RET1 to a non-zero value. The + * given pci_config_offset must be 'size' aligned. + */ +#define HV_FAST_PCI_CONFIG_GET 0xb4 + +/* pci_config_put() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_CONFIG_PUT + * ARG0: devhandle + * ARG1: pci_device + * ARG2: pci_config_offset + * ARG3: size + * ARG4: data + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle/pci_device/offset/size + * EBADALIGN pci_config_offset not size aligned + * ENOACCESS Access to this offset is not permitted + * + * Write PCI configuration space for the adapter described by the given + * devhandle. Write size (1, 2, or 4) bytes of data in a single operation, + * at pci_config_offset from the beginning of the device's configuration + * space. The data argument contains the data to be written to configuration + * space. Prior to writing, the data is size based byte swapped. + * + * If an error occurs during the write access, do not generate an error + * report, do set RET1 to a non-zero value. Otherwise RET1 is zero. + * The given pci_config_offset must be 'size' aligned. + * + * This function is permitted to read from offset zero in the configuration + * space described by the given pci_device if necessary to ensure that the + * write access to config space completes. + */ +#define HV_FAST_PCI_CONFIG_PUT 0xb5 + +/* pci_peek() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_PEEK + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * RET0: status + * RET1: error_flag + * RET2: data + * ERRORS: EINVAL Invalid devhandle or size + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * + * Attempt to read the IO address given by the given devhandle, real address, + * and size. Size must be 1, 2, 4, or 8. The read is performed as a single + * access operation using the given size. If an error occurs when reading + * from the given location, do not generate an error report, but return a + * non-zero value in RET1. If the read was successful, return zero in RET1 + * and return the actual data read in RET2. The data returned is size based + * byte swapped. + * + * Non-significant bits in RET2 are not guarenteed to have any specific value + * and therefore must be ignored. If RET1 is returned as non-zero, the data + * value is not guarenteed to have any specific value and should be ignored. + * + * The caller must have permission to read from the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_PEEK 0xb6 + +/* pci_poke() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_POKE + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: data + * ARG4: pci_device + * RET0: status + * RET1: error_flag + * ERRORS: EINVAL Invalid devhandle, size, or pci_device + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * ENOACCESS Guest access prohibited + * ENOTSUPPORTED Function is not supported by implementation + * + * Attempt to write data to the IO address given by the given devhandle, + * real address, and size. Size must be 1, 2, 4, or 8. The write is + * performed as a single access operation using the given size. Prior to + * writing the data is size based swapped. + * + * If an error occurs when writing to the given location, do not generate an + * error report, but return a non-zero value in RET1. If the write was + * successful, return zero in RET1. + * + * pci_device describes the configuration address of the device being + * written to. The implementation may safely read from offset 0 with + * the configuration space of the device described by devhandle and + * pci_device in order to guarantee that the write portion of the operation + * completes + * + * Any error that occurs due to the read shall be reported using the normal + * error reporting mechanisms .. the read error is not suppressed. + * + * The caller must have permission to write to the given devhandle, real + * address, which must be an IO address. The argument real address must be a + * size aligned address. The caller must have permission to read from + * the given devhandle, pci_device cofiguration space offset 0. + * + * The hypervisor implementation of this function must block access to any + * IO address that the guest does not have explicit permission to access. + */ +#define HV_FAST_PCI_POKE 0xb7 + +/* pci_dma_sync() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_DMA_SYNC + * ARG0: devhandle + * ARG1: real address + * ARG2: size + * ARG3: io_sync_direction + * RET0: status + * RET1: #synced + * ERRORS: EINVAL Invalid devhandle or io_sync_direction + * ENORADDR Bad real address + * + * Synchronize a memory region described by the given real address and size, + * for the device defined by the given devhandle using the direction(s) + * defined by the given io_sync_direction. The argument size is the size of + * the memory region in bytes. + * + * Return the actual number of bytes synchronized in the return value #synced, + * which may be less than or equal to the argument size. If the return + * value #synced is less than size, the caller must continue to call this + * function with updated real address and size arguments until the entire + * memory region is synchronized. + */ +#define HV_FAST_PCI_DMA_SYNC 0xb8 + +/* PCI MSI services. */ + +#define HV_MSITYPE_MSI32 0x00 +#define HV_MSITYPE_MSI64 0x01 + +#define HV_MSIQSTATE_IDLE 0x00 +#define HV_MSIQSTATE_ERROR 0x01 + +#define HV_MSIQ_INVALID 0x00 +#define HV_MSIQ_VALID 0x01 + +#define HV_MSISTATE_IDLE 0x00 +#define HV_MSISTATE_DELIVERED 0x01 + +#define HV_MSIVALID_INVALID 0x00 +#define HV_MSIVALID_VALID 0x01 + +#define HV_PCIE_MSGTYPE_PME_MSG 0x18 +#define HV_PCIE_MSGTYPE_PME_ACK_MSG 0x1b +#define HV_PCIE_MSGTYPE_CORR_MSG 0x30 +#define HV_PCIE_MSGTYPE_NONFATAL_MSG 0x31 +#define HV_PCIE_MSGTYPE_FATAL_MSG 0x33 + +#define HV_MSG_INVALID 0x00 +#define HV_MSG_VALID 0x01 + +/* pci_msiq_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_CONF + * ARG0: devhandle + * ARG1: msiqid + * ARG2: real address + * ARG3: number of entries + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msiqid or nentries + * EBADALIGN Improperly aligned real address + * ENORADDR Bad real address + * + * Configure the MSI queue given by the devhandle and msiqid arguments, + * and to be placed at the given real address and be of the given + * number of entries. The real address must be aligned exactly to match + * the queue size. Each queue entry is 64-bytes long, so f.e. a 32 entry + * queue must be aligned on a 2048 byte real address boundary. The MSI-EQ + * Head and Tail are initialized so that the MSI-EQ is 'empty'. + * + * Implementation Note: Certain implementations have fixed sized queues. In + * that case, number of entries must contain the correct + * value. + */ +#define HV_FAST_PCI_MSIQ_CONF 0xc0 + +/* pci_msiq_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_INFO + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: real address + * RET2: number of entries + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Return the configuration information for the MSI queue described + * by the given devhandle and msiqid. The base address of the queue + * is returned in ARG1 and the number of entries is returned in ARG2. + * If the queue is unconfigured, the real address is undefined and the + * number of entries will be returned as zero. + */ +#define HV_FAST_PCI_MSIQ_INFO 0xc1 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the valid state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETVALID 0xc2 + +/* pci_msiq_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqvalid (HV_MSIQ_VALID or HV_MSIQ_INVALID) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqvalid + * value or MSI EQ is uninitialized + * + * Set the valid state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETVALID 0xc3 + +/* pci_msiq_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETSTATE + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the state of the MSI-EQ described by the given devhandle and + * msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETSTATE 0xc4 + +/* pci_msiq_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETVALID + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqstate (HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR) + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqstate + * value or MSI EQ is uninitialized + * + * Set the state of the MSI-EQ described by the given devhandle and + * msiqid to the given msiqvalid. + */ +#define HV_FAST_PCI_MSIQ_SETSTATE 0xc5 + +/* pci_msiq_gethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETHEAD + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqhead + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETHEAD 0xc6 + +/* pci_msiq_sethead() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_SETHEAD + * ARG0: devhandle + * ARG1: msiqid + * ARG2: msiqhead + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msiqid or msiqhead, + * or MSI EQ is uninitialized + * + * Set the current MSI EQ queue head for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_SETHEAD 0xc7 + +/* pci_msiq_gettail() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSIQ_GETTAIL + * ARG0: devhandle + * ARG1: msiqid + * RET0: status + * RET1: msiqtail + * ERRORS: EINVAL Invalid devhandle or msiqid + * + * Get the current MSI EQ queue tail for the MSI-EQ described by the + * given devhandle and msiqid. + */ +#define HV_FAST_PCI_MSIQ_GETTAIL 0xc8 + +/* pci_msi_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETVALID + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msivalidstate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_GETVALID 0xc9 + +/* pci_msi_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETVALID + * ARG0: devhandle + * ARG1: msinum + * ARG2: msivalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msivalidstate + * + * Set the current valid/enabled state for the MSI defined by the + * given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETVALID 0xca + +/* pci_msi_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETMSIQ + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msinum or MSI is unbound + * + * Get the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_GETMSIQ 0xcb + +/* pci_msi_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETMSIQ + * ARG0: devhandle + * ARG1: msinum + * ARG2: msitype + * ARG3: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msiqid + * + * Set the MSI EQ that the MSI defined by the given devhandle and + * msinum is bound to. + */ +#define HV_FAST_PCI_MSI_SETMSIQ 0xcc + +/* pci_msi_getstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_GETSTATE + * ARG0: devhandle + * ARG1: msinum + * RET0: status + * RET1: msistate + * ERRORS: EINVAL Invalid devhandle or msinum + * + * Get the state of the MSI defined by the given devhandle and msinum. + * If not initialized, return HV_MSISTATE_IDLE. + */ +#define HV_FAST_PCI_MSI_GETSTATE 0xcd + +/* pci_msi_setstate() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSI_SETSTATE + * ARG0: devhandle + * ARG1: msinum + * ARG2: msistate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msinum or msistate + * + * Set the state of the MSI defined by the given devhandle and msinum. + */ +#define HV_FAST_PCI_MSI_SETSTATE 0xce + +/* pci_msg_getmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msiqid + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETMSIQ 0xd0 + +/* pci_msg_setmsiq() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETMSIQ + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msiqid + * RET0: status + * ERRORS: EINVAL Invalid devhandle, msgtype, or msiqid + * + * Set the MSI EQ of the MSG defined by the given devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETMSIQ 0xd1 + +/* pci_msg_getvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_GETVALID + * ARG0: devhandle + * ARG1: msgtype + * RET0: status + * RET1: msgvalidstate + * ERRORS: EINVAL Invalid devhandle or msgtype + * + * Get the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_GETVALID 0xd2 + +/* pci_msg_setvalid() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_MSG_SETVALID + * ARG0: devhandle + * ARG1: msgtype + * ARG2: msgvalidstate + * RET0: status + * ERRORS: EINVAL Invalid devhandle or msgtype or msgvalidstate + * + * Set the valid/enabled state of the MSG defined by the given + * devhandle and msgtype. + */ +#define HV_FAST_PCI_MSG_SETVALID 0xd3 + +/* Performance counter services. */ + +#define HV_PERF_JBUS_PERF_CTRL_REG 0x00 +#define HV_PERF_JBUS_PERF_CNT_REG 0x01 +#define HV_PERF_DRAM_PERF_CTRL_REG_0 0x02 +#define HV_PERF_DRAM_PERF_CNT_REG_0 0x03 +#define HV_PERF_DRAM_PERF_CTRL_REG_1 0x04 +#define HV_PERF_DRAM_PERF_CNT_REG_1 0x05 +#define HV_PERF_DRAM_PERF_CTRL_REG_2 0x06 +#define HV_PERF_DRAM_PERF_CNT_REG_2 0x07 +#define HV_PERF_DRAM_PERF_CTRL_REG_3 0x08 +#define HV_PERF_DRAM_PERF_CNT_REG_3 0x09 + +/* get_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_GET_PERFREG + * ARG0: performance reg number + * RET0: status + * RET1: performance reg value + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Read the value of the given DRAM/JBUS performance counter/control register. + */ +#define HV_FAST_GET_PERFREG 0x100 + +/* set_perfreg() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_SET_PERFREG + * ARG0: performance reg number + * ARG1: performance reg value + * RET0: status + * ERRORS: EINVAL Invalid performance register number + * ENOACCESS No access allowed to performance counters + * + * Write the given performance reg value to the given DRAM/JBUS + * performance counter/control register. + */ +#define HV_FAST_SET_PERFREG 0x101 + +/* MMU statistics services. + * + * The hypervisor maintains MMU statistics and privileged code provides + * a buffer where these statistics can be collected. It is continually + * updated once configured. The layout is as follows: + */ +#ifndef __ASSEMBLY__ +struct hv_mmu_statistics { + unsigned long immu_tsb_hits_ctx0_8k_tte; + unsigned long immu_tsb_ticks_ctx0_8k_tte; + unsigned long immu_tsb_hits_ctx0_64k_tte; + unsigned long immu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved1[2]; + unsigned long immu_tsb_hits_ctx0_4mb_tte; + unsigned long immu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved2[2]; + unsigned long immu_tsb_hits_ctx0_256mb_tte; + unsigned long immu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved3[4]; + unsigned long immu_tsb_hits_ctxnon0_8k_tte; + unsigned long immu_tsb_ticks_ctxnon0_8k_tte; + unsigned long immu_tsb_hits_ctxnon0_64k_tte; + unsigned long immu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved4[2]; + unsigned long immu_tsb_hits_ctxnon0_4mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved5[2]; + unsigned long immu_tsb_hits_ctxnon0_256mb_tte; + unsigned long immu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved6[4]; + unsigned long dmmu_tsb_hits_ctx0_8k_tte; + unsigned long dmmu_tsb_ticks_ctx0_8k_tte; + unsigned long dmmu_tsb_hits_ctx0_64k_tte; + unsigned long dmmu_tsb_ticks_ctx0_64k_tte; + unsigned long __reserved7[2]; + unsigned long dmmu_tsb_hits_ctx0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_4mb_tte; + unsigned long __reserved8[2]; + unsigned long dmmu_tsb_hits_ctx0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctx0_256mb_tte; + unsigned long __reserved9[4]; + unsigned long dmmu_tsb_hits_ctxnon0_8k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte; + unsigned long dmmu_tsb_hits_ctxnon0_64k_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte; + unsigned long __reserved10[2]; + unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte; + unsigned long __reserved11[2]; + unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte; + unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte; + unsigned long __reserved12[4]; +}; +#endif + +/* mmustat_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_CONF + * ARG0: real address + * RET0: status + * RET1: real address + * ERRORS: ENORADDR Invalid real address + * EBADALIGN Real address not aligned on 64-byte boundary + * EBADTRAP API not supported on this processor + * + * Enable MMU statistic gathering using the buffer at the given real + * address on the current virtual CPU. The new buffer real address + * is given in ARG1, and the previously specified buffer real address + * is returned in RET1, or is returned as zero for the first invocation. + * + * If the passed in real address argument is zero, this will disable + * MMU statistic collection on the current virtual CPU. If an error is + * returned then no statistics are collected. + * + * The buffer contents should be initialized to all zeros before being + * given to the hypervisor or else the statistics will be meaningless. + */ +#define HV_FAST_MMUSTAT_CONF 0x102 + +/* mmustat_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_MMUSTAT_INFO + * RET0: status + * RET1: real address + * ERRORS: EBADTRAP API not supported on this processor + * + * Return the current state and real address of the currently configured + * MMU statistics buffer on the current virtual CPU. + */ +#define HV_FAST_MMUSTAT_INFO 0x103 + +/* Function numbers for HV_CORE_TRAP. */ +#define HV_CORE_VER 0x00 +#define HV_CORE_PUTCHAR 0x01 +#define HV_CORE_EXIT 0x02 + +#endif /* !(_SPARC64_HYPERVISOR_H) */ diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h index 701483c5465d..77fbf987385f 100644 --- a/include/asm-sparc64/idprom.h +++ b/include/asm-sparc64/idprom.h @@ -9,15 +9,7 @@ #include <linux/types.h> -/* Offset into the EEPROM where the id PROM is located on the 4c */ -#define IDPROM_OFFSET 0x7d8 - -/* On sun4m; physical. */ -/* MicroSPARC(-II) does not decode 31rd bit, but it works. */ -#define IDPROM_OFFSET_M 0xfd8 - -struct idprom -{ +struct idprom { u8 id_format; /* Format identifier (always 0x01) */ u8 id_machtype; /* Machine type */ u8 id_ethaddr[6]; /* Hardware ethernet address */ @@ -30,6 +22,4 @@ struct idprom extern struct idprom *idprom; extern void idprom_init(void); -#define IDPROM_SIZE (sizeof(struct idprom)) - #endif /* !(_SPARC_IDPROM_H) */ diff --git a/include/asm-sparc64/intr_queue.h b/include/asm-sparc64/intr_queue.h new file mode 100644 index 000000000000..206077dedc2a --- /dev/null +++ b/include/asm-sparc64/intr_queue.h @@ -0,0 +1,15 @@ +#ifndef _SPARC64_INTR_QUEUE_H +#define _SPARC64_INTR_QUEUE_H + +/* Sun4v interrupt queue registers, accessed via ASI_QUEUE. */ + +#define INTRQ_CPU_MONDO_HEAD 0x3c0 /* CPU mondo head */ +#define INTRQ_CPU_MONDO_TAIL 0x3c8 /* CPU mondo tail */ +#define INTRQ_DEVICE_MONDO_HEAD 0x3d0 /* Device mondo head */ +#define INTRQ_DEVICE_MONDO_TAIL 0x3d8 /* Device mondo tail */ +#define INTRQ_RESUM_MONDO_HEAD 0x3e0 /* Resumable error mondo head */ +#define INTRQ_RESUM_MONDO_TAIL 0x3e8 /* Resumable error mondo tail */ +#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */ +#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */ + +#endif /* !(_SPARC64_INTR_QUEUE_H) */ diff --git a/include/asm-sparc64/irq.h b/include/asm-sparc64/irq.h index 8b70edcb80dc..de33d6e1afb5 100644 --- a/include/asm-sparc64/irq.h +++ b/include/asm-sparc64/irq.h @@ -72,8 +72,11 @@ struct ino_bucket { #define IMAP_VALID 0x80000000 /* IRQ Enabled */ #define IMAP_TID_UPA 0x7c000000 /* UPA TargetID */ #define IMAP_TID_JBUS 0x7c000000 /* JBUS TargetID */ +#define IMAP_TID_SHIFT 26 #define IMAP_AID_SAFARI 0x7c000000 /* Safari AgentID */ +#define IMAP_AID_SHIFT 26 #define IMAP_NID_SAFARI 0x03e00000 /* Safari NodeID */ +#define IMAP_NID_SHIFT 21 #define IMAP_IGN 0x000007c0 /* IRQ Group Number */ #define IMAP_INO 0x0000003f /* IRQ Number */ #define IMAP_INR 0x000007ff /* Full interrupt number*/ @@ -111,6 +114,7 @@ extern void disable_irq(unsigned int); #define disable_irq_nosync disable_irq extern void enable_irq(unsigned int); extern unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap); +extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino, int pil, unsigned char flags); extern unsigned int sbus_build_irq(void *sbus, unsigned int ino); static __inline__ void set_softint(unsigned long bits) diff --git a/include/asm-sparc64/mmu.h b/include/asm-sparc64/mmu.h index 8627eed6e83d..230ba678d3b0 100644 --- a/include/asm-sparc64/mmu.h +++ b/include/asm-sparc64/mmu.h @@ -4,20 +4,9 @@ #include <linux/config.h> #include <asm/page.h> #include <asm/const.h> +#include <asm/hypervisor.h> -/* - * For the 8k pagesize kernel, use only 10 hw context bits to optimize some - * shifts in the fast tlbmiss handlers, instead of all 13 bits (specifically - * for vpte offset calculation). For other pagesizes, this optimization in - * the tlbhandlers can not be done; but still, all 13 bits can not be used - * because the tlb handlers use "andcc" instruction which sign extends 13 - * bit arguments. - */ -#if PAGE_SHIFT == 13 -#define CTX_NR_BITS 10 -#else -#define CTX_NR_BITS 12 -#endif +#define CTX_NR_BITS 13 #define TAG_CONTEXT_BITS ((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL)) @@ -90,8 +79,27 @@ #ifndef __ASSEMBLY__ +#define TSB_ENTRY_ALIGNMENT 16 + +struct tsb { + unsigned long tag; + unsigned long pte; +} __attribute__((aligned(TSB_ENTRY_ALIGNMENT))); + +extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte); +extern void tsb_flush(unsigned long ent, unsigned long tag); +extern void tsb_init(struct tsb *tsb, unsigned long size); + typedef struct { - unsigned long sparc64_ctx_val; + spinlock_t lock; + unsigned long sparc64_ctx_val; + struct tsb *tsb; + unsigned long tsb_rss_limit; + unsigned long tsb_nentries; + unsigned long tsb_reg_val; + unsigned long tsb_map_vaddr; + unsigned long tsb_map_pte; + struct hv_tsb_descr tsb_descr; } mm_context_t; #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h index 57ee7b306189..e7974321d052 100644 --- a/include/asm-sparc64/mmu_context.h +++ b/include/asm-sparc64/mmu_context.h @@ -19,96 +19,98 @@ extern unsigned long tlb_context_cache; extern unsigned long mmu_context_bmap[]; extern void get_new_mmu_context(struct mm_struct *mm); +#ifdef CONFIG_SMP +extern void smp_new_mmu_context_version(void); +#else +#define smp_new_mmu_context_version() do { } while (0) +#endif + +extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); +extern void destroy_context(struct mm_struct *mm); + +extern void __tsb_context_switch(unsigned long pgd_pa, + unsigned long tsb_reg, + unsigned long tsb_vaddr, + unsigned long tsb_pte, + unsigned long tsb_descr_pa); + +static inline void tsb_context_switch(struct mm_struct *mm) +{ + __tsb_context_switch(__pa(mm->pgd), mm->context.tsb_reg_val, + mm->context.tsb_map_vaddr, + mm->context.tsb_map_pte, + __pa(&mm->context.tsb_descr)); +} -/* Initialize a new mmu context. This is invoked when a new - * address space instance (unique or shared) is instantiated. - * This just needs to set mm->context to an invalid context. - */ -#define init_new_context(__tsk, __mm) \ - (((__mm)->context.sparc64_ctx_val = 0UL), 0) - -/* Destroy a dead context. This occurs when mmput drops the - * mm_users count to zero, the mmaps have been released, and - * all the page tables have been flushed. Our job is to destroy - * any remaining processor-specific state, and in the sparc64 - * case this just means freeing up the mmu context ID held by - * this task if valid. - */ -#define destroy_context(__mm) \ -do { spin_lock(&ctx_alloc_lock); \ - if (CTX_VALID((__mm)->context)) { \ - unsigned long nr = CTX_NRBITS((__mm)->context); \ - mmu_context_bmap[nr>>6] &= ~(1UL << (nr & 63)); \ - } \ - spin_unlock(&ctx_alloc_lock); \ -} while(0) - -/* Reload the two core values used by TLB miss handler - * processing on sparc64. They are: - * 1) The physical address of mm->pgd, when full page - * table walks are necessary, this is where the - * search begins. - * 2) A "PGD cache". For 32-bit tasks only pgd[0] is - * ever used since that maps the entire low 4GB - * completely. To speed up TLB miss processing we - * make this value available to the handlers. This - * decreases the amount of memory traffic incurred. - */ -#define reload_tlbmiss_state(__tsk, __mm) \ -do { \ - register unsigned long paddr asm("o5"); \ - register unsigned long pgd_cache asm("o4"); \ - paddr = __pa((__mm)->pgd); \ - pgd_cache = 0UL; \ - if (task_thread_info(__tsk)->flags & _TIF_32BIT) \ - pgd_cache = get_pgd_cache((__mm)->pgd); \ - __asm__ __volatile__("wrpr %%g0, 0x494, %%pstate\n\t" \ - "mov %3, %%g4\n\t" \ - "mov %0, %%g7\n\t" \ - "stxa %1, [%%g4] %2\n\t" \ - "membar #Sync\n\t" \ - "wrpr %%g0, 0x096, %%pstate" \ - : /* no outputs */ \ - : "r" (paddr), "r" (pgd_cache),\ - "i" (ASI_DMMU), "i" (TSB_REG)); \ -} while(0) +extern void tsb_grow(struct mm_struct *mm, unsigned long mm_rss); +#ifdef CONFIG_SMP +extern void smp_tsb_sync(struct mm_struct *mm); +#else +#define smp_tsb_sync(__mm) do { } while (0) +#endif /* Set MMU context in the actual hardware. */ #define load_secondary_context(__mm) \ - __asm__ __volatile__("stxa %0, [%1] %2\n\t" \ - "flush %%g6" \ - : /* No outputs */ \ - : "r" (CTX_HWBITS((__mm)->context)), \ - "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU)) + __asm__ __volatile__( \ + "\n661: stxa %0, [%1] %2\n" \ + " .section .sun4v_1insn_patch, \"ax\"\n" \ + " .word 661b\n" \ + " stxa %0, [%1] %3\n" \ + " .previous\n" \ + " flush %%g6\n" \ + : /* No outputs */ \ + : "r" (CTX_HWBITS((__mm)->context)), \ + "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU)) extern void __flush_tlb_mm(unsigned long, unsigned long); -/* Switch the current MM context. */ +/* Switch the current MM context. Interrupts are disabled. */ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk) { - unsigned long ctx_valid; + unsigned long ctx_valid, flags; int cpu; - /* Note: page_table_lock is used here to serialize switch_mm - * and activate_mm, and their calls to get_new_mmu_context. - * This use of page_table_lock is unrelated to its other uses. - */ - spin_lock(&mm->page_table_lock); + spin_lock_irqsave(&mm->context.lock, flags); ctx_valid = CTX_VALID(mm->context); if (!ctx_valid) get_new_mmu_context(mm); - spin_unlock(&mm->page_table_lock); - if (!ctx_valid || (old_mm != mm)) { - load_secondary_context(mm); - reload_tlbmiss_state(tsk, mm); - } + /* We have to be extremely careful here or else we will miss + * a TSB grow if we switch back and forth between a kernel + * thread and an address space which has it's TSB size increased + * on another processor. + * + * It is possible to play some games in order to optimize the + * switch, but the safest thing to do is to unconditionally + * perform the secondary context load and the TSB context switch. + * + * For reference the bad case is, for address space "A": + * + * CPU 0 CPU 1 + * run address space A + * set cpu0's bits in cpu_vm_mask + * switch to kernel thread, borrow + * address space A via entry_lazy_tlb + * run address space A + * set cpu1's bit in cpu_vm_mask + * flush_tlb_pending() + * reset cpu_vm_mask to just cpu1 + * TSB grow + * run address space A + * context was valid, so skip + * TSB context switch + * + * At that point cpu0 continues to use a stale TSB, the one from + * before the TSB grow performed on cpu1. cpu1 did not cross-call + * cpu0 to update it's TSB because at that point the cpu_vm_mask + * only had cpu1 set in it. + */ + load_secondary_context(mm); + tsb_context_switch(mm); - /* Even if (mm == old_mm) we _must_ check - * the cpu_vm_mask. If we do not we could - * corrupt the TLB state because of how - * smp_flush_tlb_{page,range,mm} on sparc64 - * and lazy tlb switches work. -DaveM + /* Any time a processor runs a context on an address space + * for the first time, we must flush that context out of the + * local TLB. */ cpu = smp_processor_id(); if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) { @@ -116,6 +118,7 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT); } + spin_unlock_irqrestore(&mm->context.lock, flags); } #define deactivate_mm(tsk,mm) do { } while (0) @@ -123,23 +126,20 @@ static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, str /* Activate a new MM instance for the current task. */ static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm) { + unsigned long flags; int cpu; - /* Note: page_table_lock is used here to serialize switch_mm - * and activate_mm, and their calls to get_new_mmu_context. - * This use of page_table_lock is unrelated to its other uses. - */ - spin_lock(&mm->page_table_lock); + spin_lock_irqsave(&mm->context.lock, flags); if (!CTX_VALID(mm->context)) get_new_mmu_context(mm); cpu = smp_processor_id(); if (!cpu_isset(cpu, mm->cpu_vm_mask)) cpu_set(cpu, mm->cpu_vm_mask); - spin_unlock(&mm->page_table_lock); load_secondary_context(mm); __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT); - reload_tlbmiss_state(current, mm); + tsb_context_switch(mm); + spin_unlock_irqrestore(&mm->context.lock, flags); } #endif /* !(__ASSEMBLY__) */ diff --git a/include/asm-sparc64/numnodes.h b/include/asm-sparc64/numnodes.h new file mode 100644 index 000000000000..017e7e74f5e7 --- /dev/null +++ b/include/asm-sparc64/numnodes.h @@ -0,0 +1,6 @@ +#ifndef _SPARC64_NUMNODES_H +#define _SPARC64_NUMNODES_H + +#define NODES_SHIFT 0 + +#endif /* !(_SPARC64_NUMNODES_H) */ diff --git a/include/asm-sparc64/oplib.h b/include/asm-sparc64/oplib.h index 3c59b2693fb9..c754676e13ef 100644 --- a/include/asm-sparc64/oplib.h +++ b/include/asm-sparc64/oplib.h @@ -12,18 +12,8 @@ #include <linux/config.h> #include <asm/openprom.h> -/* Enumeration to describe the prom major version we have detected. */ -enum prom_major_version { - PROM_V0, /* Original sun4c V0 prom */ - PROM_V2, /* sun4c and early sun4m V2 prom */ - PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ - PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ - PROM_AP1000, /* actually no prom at all */ -}; - -extern enum prom_major_version prom_vers; -/* Revision, and firmware revision. */ -extern unsigned int prom_rev, prom_prev; +/* OBP version string. */ +extern char prom_version[]; /* Root node of the prom device tree, this stays constant after * initialization is complete. @@ -39,6 +29,9 @@ extern int prom_stdin, prom_stdout; extern int prom_chosen_node; /* Helper values and strings in arch/sparc64/kernel/head.S */ +extern const char prom_peer_name[]; +extern const char prom_compatible_name[]; +extern const char prom_root_compatible[]; extern const char prom_finddev_name[]; extern const char prom_chosen_path[]; extern const char prom_getprop_name[]; @@ -130,15 +123,6 @@ extern void prom_setcallback(callback_func_t func_ptr); */ extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); -/* Get the prom major version. */ -extern int prom_version(void); - -/* Get the prom plugin revision. */ -extern int prom_getrev(void); - -/* Get the prom firmware revision. */ -extern int prom_getprev(void); - /* Character operations to/from the console.... */ /* Non-blocking get character from console. */ @@ -164,6 +148,7 @@ enum prom_input_device { PROMDEV_ITTYA, /* input from ttya */ PROMDEV_ITTYB, /* input from ttyb */ PROMDEV_IRSC, /* input from rsc */ + PROMDEV_IVCONS, /* input from virtual-console */ PROMDEV_I_UNK, }; @@ -176,6 +161,7 @@ enum prom_output_device { PROMDEV_OTTYA, /* to ttya */ PROMDEV_OTTYB, /* to ttyb */ PROMDEV_ORSC, /* to rsc */ + PROMDEV_OVCONS, /* to virtual-console */ PROMDEV_O_UNK, }; @@ -183,10 +169,18 @@ extern enum prom_output_device prom_query_output_device(void); /* Multiprocessor operations... */ #ifdef CONFIG_SMP -/* Start the CPU with the given device tree node, context table, and context - * at the passed program counter. +/* Start the CPU with the given device tree node at the passed program + * counter with the given arg passed in via register %o0. + */ +extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg); + +/* Start the CPU with the given cpu ID at the passed program + * counter with the given arg passed in via register %o0. */ -extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long o0); +extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg); + +/* Stop the CPU with the given cpu ID. */ +extern void prom_stopcpu_cpuid(int cpuid); /* Stop the current CPU. */ extern void prom_stopself(void); @@ -335,6 +329,7 @@ int cpu_find_by_mid(int mid, int *prom_node); /* Client interface level routines. */ extern void prom_set_trap_table(unsigned long tba); +extern void prom_set_trap_table_sun4v(unsigned long tba, unsigned long mmfsa); extern long p1275_cmd(const char *, long, ...); diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h index 5426bb28a993..fcb2812265f4 100644 --- a/include/asm-sparc64/page.h +++ b/include/asm-sparc64/page.h @@ -104,10 +104,12 @@ typedef unsigned long pgprot_t; #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) #define ARCH_HAS_SETCLEAR_HUGE_PTE #define ARCH_HAS_HUGETLB_PREFAULT_HOOK +#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA #endif #define TASK_UNMAPPED_BASE (test_thread_flag(TIF_32BIT) ? \ - (_AC(0x0000000070000000,UL)) : (PAGE_OFFSET)) + (_AC(0x0000000070000000,UL)) : \ + (_AC(0xfffff80000000000,UL) + (1UL << 32UL))) #endif /* !(__ASSEMBLY__) */ @@ -124,17 +126,10 @@ typedef unsigned long pgprot_t; #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET) #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) -/* PFNs are real physical page numbers. However, mem_map only begins to record - * per-page information starting at pfn_base. This is to handle systems where - * the first physical page in the machine is at some huge physical address, - * such as 4GB. This is common on a partitioned E10000, for example. - */ -extern struct page *pfn_to_page(unsigned long pfn); -extern unsigned long page_to_pfn(struct page *); +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr)>>PAGE_SHIFT) -#define pfn_valid(pfn) (((pfn)-(pfn_base)) < max_mapnr) #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define virt_to_phys __pa diff --git a/include/asm-sparc64/pbm.h b/include/asm-sparc64/pbm.h index dd35a2c7798a..1396f110939a 100644 --- a/include/asm-sparc64/pbm.h +++ b/include/asm-sparc64/pbm.h @@ -139,6 +139,9 @@ struct pci_pbm_info { /* Opaque 32-bit system bus Port ID. */ u32 portid; + /* Opaque 32-bit handle used for hypervisor calls. */ + u32 devhandle; + /* Chipset version information. */ int chip_type; #define PBM_CHIP_TYPE_SABRE 1 diff --git a/include/asm-sparc64/pci.h b/include/asm-sparc64/pci.h index 89bd71b1c0d8..7c5a589ea437 100644 --- a/include/asm-sparc64/pci.h +++ b/include/asm-sparc64/pci.h @@ -41,10 +41,26 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) struct pci_dev; +struct pci_iommu_ops { + void *(*alloc_consistent)(struct pci_dev *, size_t, dma_addr_t *); + void (*free_consistent)(struct pci_dev *, size_t, void *, dma_addr_t); + dma_addr_t (*map_single)(struct pci_dev *, void *, size_t, int); + void (*unmap_single)(struct pci_dev *, dma_addr_t, size_t, int); + int (*map_sg)(struct pci_dev *, struct scatterlist *, int, int); + void (*unmap_sg)(struct pci_dev *, struct scatterlist *, int, int); + void (*dma_sync_single_for_cpu)(struct pci_dev *, dma_addr_t, size_t, int); + void (*dma_sync_sg_for_cpu)(struct pci_dev *, struct scatterlist *, int, int); +}; + +extern struct pci_iommu_ops *pci_iommu_ops; + /* Allocate and map kernel buffer using consistent mode DMA for a device. * hwdev should be valid struct pci_dev pointer for PCI devices. */ -extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle); +static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle) +{ + return pci_iommu_ops->alloc_consistent(hwdev, size, dma_handle); +} /* Free and unmap a consistent DMA buffer. * cpu_addr is what was returned from pci_alloc_consistent, @@ -54,7 +70,10 @@ extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t * References to the memory and mappings associated with cpu_addr/dma_addr * past this call are illegal. */ -extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle); +static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) +{ + return pci_iommu_ops->free_consistent(hwdev, size, vaddr, dma_handle); +} /* Map a single buffer of the indicated size for DMA in streaming mode. * The 32-bit bus address to use is returned. @@ -62,7 +81,10 @@ extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, * Once the device is given the dma address, the device owns this memory * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed. */ -extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction); +static inline dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction) +{ + return pci_iommu_ops->map_single(hwdev, ptr, size, direction); +} /* Unmap a single streaming mode DMA translation. The dma_addr and size * must match what was provided for in a previous pci_map_single call. All @@ -71,7 +93,10 @@ extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, * After this call, reads by the cpu to the buffer are guaranteed to see * whatever the device wrote there. */ -extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction); +static inline void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction) +{ + pci_iommu_ops->unmap_single(hwdev, dma_addr, size, direction); +} /* No highmem on sparc64, plus we have an IOMMU, so mapping pages is easy. */ #define pci_map_page(dev, page, off, size, dir) \ @@ -107,15 +132,19 @@ extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t * Device ownership issues as mentioned above for pci_map_single are * the same here. */ -extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nents, int direction); +static inline int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction) +{ + return pci_iommu_ops->map_sg(hwdev, sg, nents, direction); +} /* Unmap a set of streaming mode DMA translations. * Again, cpu read rules concerning calls here are the same as for * pci_unmap_single() above. */ -extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, - int nhwents, int direction); +static inline void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction) +{ + pci_iommu_ops->unmap_sg(hwdev, sg, nhwents, direction); +} /* Make physical memory consistent for a single * streaming mode DMA translation after a transfer. @@ -127,8 +156,10 @@ extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, * must first perform a pci_dma_sync_for_device, and then the * device again owns the buffer. */ -extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, - size_t size, int direction); +static inline void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction) +{ + pci_iommu_ops->dma_sync_single_for_cpu(hwdev, dma_handle, size, direction); +} static inline void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, @@ -144,7 +175,10 @@ pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, * The same as pci_dma_sync_single_* but for a scatter-gather list, * same rules and usage. */ -extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); +static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction) +{ + pci_iommu_ops->dma_sync_sg_for_cpu(hwdev, sg, nelems, direction); +} static inline void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h index a96067cca963..12e4a273bd43 100644 --- a/include/asm-sparc64/pgalloc.h +++ b/include/asm-sparc64/pgalloc.h @@ -6,6 +6,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/mm.h> +#include <linux/slab.h> #include <asm/spitfire.h> #include <asm/cpudata.h> @@ -13,172 +14,59 @@ #include <asm/page.h> /* Page table allocation/freeing. */ -#ifdef CONFIG_SMP -/* Sliiiicck */ -#define pgt_quicklists local_cpu_data() -#else -extern struct pgtable_cache_struct { - unsigned long *pgd_cache; - unsigned long *pte_cache[2]; - unsigned int pgcache_size; -} pgt_quicklists; -#endif -#define pgd_quicklist (pgt_quicklists.pgd_cache) -#define pmd_quicklist ((unsigned long *)0) -#define pte_quicklist (pgt_quicklists.pte_cache) -#define pgtable_cache_size (pgt_quicklists.pgcache_size) +extern kmem_cache_t *pgtable_cache; -static __inline__ void free_pgd_fast(pgd_t *pgd) +static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - preempt_disable(); - *(unsigned long *)pgd = (unsigned long) pgd_quicklist; - pgd_quicklist = (unsigned long *) pgd; - pgtable_cache_size++; - preempt_enable(); + return kmem_cache_alloc(pgtable_cache, GFP_KERNEL); } -static __inline__ pgd_t *get_pgd_fast(void) +static inline void pgd_free(pgd_t *pgd) { - unsigned long *ret; - - preempt_disable(); - if((ret = pgd_quicklist) != NULL) { - pgd_quicklist = (unsigned long *)(*ret); - ret[0] = 0; - pgtable_cache_size--; - preempt_enable(); - } else { - preempt_enable(); - ret = (unsigned long *) __get_free_page(GFP_KERNEL|__GFP_REPEAT); - if(ret) - memset(ret, 0, PAGE_SIZE); - } - return (pgd_t *)ret; + kmem_cache_free(pgtable_cache, pgd); } -static __inline__ void free_pgd_slow(pgd_t *pgd) -{ - free_page((unsigned long)pgd); -} - -#ifdef DCACHE_ALIASING_POSSIBLE -#define VPTE_COLOR(address) (((address) >> (PAGE_SHIFT + 10)) & 1UL) -#define DCACHE_COLOR(address) (((address) >> PAGE_SHIFT) & 1UL) -#else -#define VPTE_COLOR(address) 0 -#define DCACHE_COLOR(address) 0 -#endif - #define pud_populate(MM, PUD, PMD) pud_set(PUD, PMD) -static __inline__ pmd_t *pmd_alloc_one_fast(struct mm_struct *mm, unsigned long address) +static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { - unsigned long *ret; - int color = 0; - - preempt_disable(); - if (pte_quicklist[color] == NULL) - color = 1; - - if((ret = (unsigned long *)pte_quicklist[color]) != NULL) { - pte_quicklist[color] = (unsigned long *)(*ret); - ret[0] = 0; - pgtable_cache_size--; - } - preempt_enable(); - - return (pmd_t *)ret; + return kmem_cache_alloc(pgtable_cache, + GFP_KERNEL|__GFP_REPEAT); } -static __inline__ pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) +static inline void pmd_free(pmd_t *pmd) { - pmd_t *pmd; - - pmd = pmd_alloc_one_fast(mm, address); - if (!pmd) { - pmd = (pmd_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT); - if (pmd) - memset(pmd, 0, PAGE_SIZE); - } - return pmd; + kmem_cache_free(pgtable_cache, pmd); } -static __inline__ void free_pmd_fast(pmd_t *pmd) +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) { - unsigned long color = DCACHE_COLOR((unsigned long)pmd); - - preempt_disable(); - *(unsigned long *)pmd = (unsigned long) pte_quicklist[color]; - pte_quicklist[color] = (unsigned long *) pmd; - pgtable_cache_size++; - preempt_enable(); + return kmem_cache_alloc(pgtable_cache, + GFP_KERNEL|__GFP_REPEAT); } -static __inline__ void free_pmd_slow(pmd_t *pmd) +static inline struct page *pte_alloc_one(struct mm_struct *mm, + unsigned long address) { - free_page((unsigned long)pmd); + return virt_to_page(pte_alloc_one_kernel(mm, address)); } - -#define pmd_populate_kernel(MM, PMD, PTE) pmd_set(PMD, PTE) -#define pmd_populate(MM,PMD,PTE_PAGE) \ - pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE)) - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address); - -static inline struct page * -pte_alloc_one(struct mm_struct *mm, unsigned long addr) -{ - pte_t *pte = pte_alloc_one_kernel(mm, addr); - - if (pte) - return virt_to_page(pte); - - return NULL; -} - -static __inline__ pte_t *pte_alloc_one_fast(struct mm_struct *mm, unsigned long address) -{ - unsigned long color = VPTE_COLOR(address); - unsigned long *ret; - - preempt_disable(); - if((ret = (unsigned long *)pte_quicklist[color]) != NULL) { - pte_quicklist[color] = (unsigned long *)(*ret); - ret[0] = 0; - pgtable_cache_size--; - } - preempt_enable(); - return (pte_t *)ret; -} - -static __inline__ void free_pte_fast(pte_t *pte) -{ - unsigned long color = DCACHE_COLOR((unsigned long)pte); - - preempt_disable(); - *(unsigned long *)pte = (unsigned long) pte_quicklist[color]; - pte_quicklist[color] = (unsigned long *) pte; - pgtable_cache_size++; - preempt_enable(); -} - -static __inline__ void free_pte_slow(pte_t *pte) -{ - free_page((unsigned long)pte); -} - + static inline void pte_free_kernel(pte_t *pte) { - free_pte_fast(pte); + kmem_cache_free(pgtable_cache, pte); } static inline void pte_free(struct page *ptepage) { - free_pte_fast(page_address(ptepage)); + pte_free_kernel(page_address(ptepage)); } -#define pmd_free(pmd) free_pmd_fast(pmd) -#define pgd_free(pgd) free_pgd_fast(pgd) -#define pgd_alloc(mm) get_pgd_fast() + +#define pmd_populate_kernel(MM, PMD, PTE) pmd_set(PMD, PTE) +#define pmd_populate(MM,PMD,PTE_PAGE) \ + pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE)) + +#define check_pgt_cache() do { } while (0) #endif /* _SPARC64_PGALLOC_H */ diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h index f0a9b44d3eb5..ed4124edf837 100644 --- a/include/asm-sparc64/pgtable.h +++ b/include/asm-sparc64/pgtable.h @@ -25,7 +25,8 @@ #include <asm/const.h> /* The kernel image occupies 0x4000000 to 0x1000000 (4MB --> 32MB). - * The page copy blockops can use 0x2000000 to 0x10000000. + * The page copy blockops can use 0x2000000 to 0x4000000. + * The TSB is mapped in the 0x4000000 to 0x6000000 range. * The PROM resides in an area spanning 0xf0000000 to 0x100000000. * The vmalloc area spans 0x100000000 to 0x200000000. * Since modules need to be in the lowest 32-bits of the address space, @@ -34,6 +35,7 @@ * 0x400000000. */ #define TLBTEMP_BASE _AC(0x0000000002000000,UL) +#define TSBMAP_BASE _AC(0x0000000004000000,UL) #define MODULES_VADDR _AC(0x0000000010000000,UL) #define MODULES_LEN _AC(0x00000000e0000000,UL) #define MODULES_END _AC(0x00000000f0000000,UL) @@ -88,162 +90,538 @@ #endif /* !(__ASSEMBLY__) */ -/* Spitfire/Cheetah TTE bits. */ -#define _PAGE_VALID _AC(0x8000000000000000,UL) /* Valid TTE */ -#define _PAGE_R _AC(0x8000000000000000,UL) /* Keep ref bit up to date*/ -#define _PAGE_SZ4MB _AC(0x6000000000000000,UL) /* 4MB Page */ -#define _PAGE_SZ512K _AC(0x4000000000000000,UL) /* 512K Page */ -#define _PAGE_SZ64K _AC(0x2000000000000000,UL) /* 64K Page */ -#define _PAGE_SZ8K _AC(0x0000000000000000,UL) /* 8K Page */ -#define _PAGE_NFO _AC(0x1000000000000000,UL) /* No Fault Only */ -#define _PAGE_IE _AC(0x0800000000000000,UL) /* Invert Endianness */ -#define _PAGE_SOFT2 _AC(0x07FC000000000000,UL) /* Software bits, set 2 */ -#define _PAGE_RES1 _AC(0x0002000000000000,UL) /* Reserved */ -#define _PAGE_SZ32MB _AC(0x0001000000000000,UL) /* (Panther) 32MB page */ -#define _PAGE_SZ256MB _AC(0x2001000000000000,UL) /* (Panther) 256MB page */ -#define _PAGE_SN _AC(0x0000800000000000,UL) /* (Cheetah) Snoop */ -#define _PAGE_RES2 _AC(0x0000780000000000,UL) /* Reserved */ -#define _PAGE_PADDR_SF _AC(0x000001FFFFFFE000,UL) /* (Spitfire) paddr[40:13]*/ -#define _PAGE_PADDR _AC(0x000007FFFFFFE000,UL) /* (Cheetah) paddr[42:13] */ -#define _PAGE_SOFT _AC(0x0000000000001F80,UL) /* Software bits */ -#define _PAGE_L _AC(0x0000000000000040,UL) /* Locked TTE */ -#define _PAGE_CP _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */ -#define _PAGE_CV _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */ -#define _PAGE_E _AC(0x0000000000000008,UL) /* side-Effect */ -#define _PAGE_P _AC(0x0000000000000004,UL) /* Privileged Page */ -#define _PAGE_W _AC(0x0000000000000002,UL) /* Writable */ -#define _PAGE_G _AC(0x0000000000000001,UL) /* Global */ - -/* Here are the SpitFire software bits we use in the TTE's. - * - * WARNING: If you are going to try and start using some - * of the soft2 bits, you will need to make - * modifications to the swap entry implementation. - * For example, one thing that could happen is that - * swp_entry_to_pte() would BUG_ON() if you tried - * to use one of the soft2 bits for _PAGE_FILE. - * - * Like other architectures, I have aliased _PAGE_FILE with - * _PAGE_MODIFIED. This works because _PAGE_FILE is never - * interpreted that way unless _PAGE_PRESENT is clear. - */ -#define _PAGE_EXEC _AC(0x0000000000001000,UL) /* Executable SW bit */ -#define _PAGE_MODIFIED _AC(0x0000000000000800,UL) /* Modified (dirty) */ -#define _PAGE_FILE _AC(0x0000000000000800,UL) /* Pagecache page */ -#define _PAGE_ACCESSED _AC(0x0000000000000400,UL) /* Accessed (ref'd) */ -#define _PAGE_READ _AC(0x0000000000000200,UL) /* Readable SW Bit */ -#define _PAGE_WRITE _AC(0x0000000000000100,UL) /* Writable SW Bit */ -#define _PAGE_PRESENT _AC(0x0000000000000080,UL) /* Present */ +/* PTE bits which are the same in SUN4U and SUN4V format. */ +#define _PAGE_VALID _AC(0x8000000000000000,UL) /* Valid TTE */ +#define _PAGE_R _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/ + +/* SUN4U pte bits... */ +#define _PAGE_SZ4MB_4U _AC(0x6000000000000000,UL) /* 4MB Page */ +#define _PAGE_SZ512K_4U _AC(0x4000000000000000,UL) /* 512K Page */ +#define _PAGE_SZ64K_4U _AC(0x2000000000000000,UL) /* 64K Page */ +#define _PAGE_SZ8K_4U _AC(0x0000000000000000,UL) /* 8K Page */ +#define _PAGE_NFO_4U _AC(0x1000000000000000,UL) /* No Fault Only */ +#define _PAGE_IE_4U _AC(0x0800000000000000,UL) /* Invert Endianness */ +#define _PAGE_SOFT2_4U _AC(0x07FC000000000000,UL) /* Software bits, set 2 */ +#define _PAGE_RES1_4U _AC(0x0002000000000000,UL) /* Reserved */ +#define _PAGE_SZ32MB_4U _AC(0x0001000000000000,UL) /* (Panther) 32MB page */ +#define _PAGE_SZ256MB_4U _AC(0x2001000000000000,UL) /* (Panther) 256MB page */ +#define _PAGE_SN_4U _AC(0x0000800000000000,UL) /* (Cheetah) Snoop */ +#define _PAGE_RES2_4U _AC(0x0000780000000000,UL) /* Reserved */ +#define _PAGE_PADDR_4U _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13] */ +#define _PAGE_SOFT_4U _AC(0x0000000000001F80,UL) /* Software bits: */ +#define _PAGE_EXEC_4U _AC(0x0000000000001000,UL) /* Executable SW bit */ +#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty) */ +#define _PAGE_FILE_4U _AC(0x0000000000000800,UL) /* Pagecache page */ +#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd) */ +#define _PAGE_READ_4U _AC(0x0000000000000200,UL) /* Readable SW Bit */ +#define _PAGE_WRITE_4U _AC(0x0000000000000100,UL) /* Writable SW Bit */ +#define _PAGE_PRESENT_4U _AC(0x0000000000000080,UL) /* Present */ +#define _PAGE_L_4U _AC(0x0000000000000040,UL) /* Locked TTE */ +#define _PAGE_CP_4U _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */ +#define _PAGE_CV_4U _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */ +#define _PAGE_E_4U _AC(0x0000000000000008,UL) /* side-Effect */ +#define _PAGE_P_4U _AC(0x0000000000000004,UL) /* Privileged Page */ +#define _PAGE_W_4U _AC(0x0000000000000002,UL) /* Writable */ + +/* SUN4V pte bits... */ +#define _PAGE_NFO_4V _AC(0x4000000000000000,UL) /* No Fault Only */ +#define _PAGE_SOFT2_4V _AC(0x3F00000000000000,UL) /* Software bits, set 2 */ +#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty) */ +#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd) */ +#define _PAGE_READ_4V _AC(0x0800000000000000,UL) /* Readable SW Bit */ +#define _PAGE_WRITE_4V _AC(0x0400000000000000,UL) /* Writable SW Bit */ +#define _PAGE_PADDR_4V _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13] */ +#define _PAGE_IE_4V _AC(0x0000000000001000,UL) /* Invert Endianness */ +#define _PAGE_E_4V _AC(0x0000000000000800,UL) /* side-Effect */ +#define _PAGE_CP_4V _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */ +#define _PAGE_CV_4V _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */ +#define _PAGE_P_4V _AC(0x0000000000000100,UL) /* Privileged Page */ +#define _PAGE_EXEC_4V _AC(0x0000000000000080,UL) /* Executable Page */ +#define _PAGE_W_4V _AC(0x0000000000000040,UL) /* Writable */ +#define _PAGE_SOFT_4V _AC(0x0000000000000030,UL) /* Software bits */ +#define _PAGE_FILE_4V _AC(0x0000000000000020,UL) /* Pagecache page */ +#define _PAGE_PRESENT_4V _AC(0x0000000000000010,UL) /* Present */ +#define _PAGE_RESV_4V _AC(0x0000000000000008,UL) /* Reserved */ +#define _PAGE_SZ16GB_4V _AC(0x0000000000000007,UL) /* 16GB Page */ +#define _PAGE_SZ2GB_4V _AC(0x0000000000000006,UL) /* 2GB Page */ +#define _PAGE_SZ256MB_4V _AC(0x0000000000000005,UL) /* 256MB Page */ +#define _PAGE_SZ32MB_4V _AC(0x0000000000000004,UL) /* 32MB Page */ +#define _PAGE_SZ4MB_4V _AC(0x0000000000000003,UL) /* 4MB Page */ +#define _PAGE_SZ512K_4V _AC(0x0000000000000002,UL) /* 512K Page */ +#define _PAGE_SZ64K_4V _AC(0x0000000000000001,UL) /* 64K Page */ +#define _PAGE_SZ8K_4V _AC(0x0000000000000000,UL) /* 8K Page */ #if PAGE_SHIFT == 13 -#define _PAGE_SZBITS _PAGE_SZ8K +#define _PAGE_SZBITS_4U _PAGE_SZ8K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ8K_4V #elif PAGE_SHIFT == 16 -#define _PAGE_SZBITS _PAGE_SZ64K +#define _PAGE_SZBITS_4U _PAGE_SZ64K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ64K_4V #elif PAGE_SHIFT == 19 -#define _PAGE_SZBITS _PAGE_SZ512K +#define _PAGE_SZBITS_4U _PAGE_SZ512K_4U +#define _PAGE_SZBITS_4V _PAGE_SZ512K_4V #elif PAGE_SHIFT == 22 -#define _PAGE_SZBITS _PAGE_SZ4MB +#define _PAGE_SZBITS_4U _PAGE_SZ4MB_4U +#define _PAGE_SZBITS_4V _PAGE_SZ4MB_4V #else #error Wrong PAGE_SHIFT specified #endif #if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) -#define _PAGE_SZHUGE _PAGE_SZ4MB +#define _PAGE_SZHUGE_4U _PAGE_SZ4MB_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ4MB_4V #elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K) -#define _PAGE_SZHUGE _PAGE_SZ512K +#define _PAGE_SZHUGE_4U _PAGE_SZ512K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ512K_4V #elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K) -#define _PAGE_SZHUGE _PAGE_SZ64K +#define _PAGE_SZHUGE_4U _PAGE_SZ64K_4U +#define _PAGE_SZHUGE_4V _PAGE_SZ64K_4V #endif -#define _PAGE_CACHE (_PAGE_CP | _PAGE_CV) +/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */ +#define __P000 __pgprot(0) +#define __P001 __pgprot(0) +#define __P010 __pgprot(0) +#define __P011 __pgprot(0) +#define __P100 __pgprot(0) +#define __P101 __pgprot(0) +#define __P110 __pgprot(0) +#define __P111 __pgprot(0) + +#define __S000 __pgprot(0) +#define __S001 __pgprot(0) +#define __S010 __pgprot(0) +#define __S011 __pgprot(0) +#define __S100 __pgprot(0) +#define __S101 __pgprot(0) +#define __S110 __pgprot(0) +#define __S111 __pgprot(0) -#define __DIRTY_BITS (_PAGE_MODIFIED | _PAGE_WRITE | _PAGE_W) -#define __ACCESS_BITS (_PAGE_ACCESSED | _PAGE_READ | _PAGE_R) -#define __PRIV_BITS _PAGE_P +#ifndef __ASSEMBLY__ -#define PAGE_NONE __pgprot (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_CACHE) +extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long); -/* Don't set the TTE _PAGE_W bit here, else the dirty bit never gets set. */ -#define PAGE_SHARED __pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \ - __ACCESS_BITS | _PAGE_WRITE | _PAGE_EXEC) +extern unsigned long pte_sz_bits(unsigned long size); -#define PAGE_COPY __pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \ - __ACCESS_BITS | _PAGE_EXEC) +extern pgprot_t PAGE_KERNEL; +extern pgprot_t PAGE_KERNEL_LOCKED; +extern pgprot_t PAGE_COPY; +extern pgprot_t PAGE_SHARED; -#define PAGE_READONLY __pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \ - __ACCESS_BITS | _PAGE_EXEC) +/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */ +extern unsigned long _PAGE_IE; +extern unsigned long _PAGE_E; +extern unsigned long _PAGE_CACHE; -#define PAGE_KERNEL __pgprot (_PAGE_PRESENT | _PAGE_VALID | _PAGE_CACHE | \ - __PRIV_BITS | \ - __ACCESS_BITS | __DIRTY_BITS | _PAGE_EXEC) +extern unsigned long pg_iobits; +extern unsigned long _PAGE_ALL_SZ_BITS; +extern unsigned long _PAGE_SZBITS; -#define PAGE_SHARED_NOEXEC __pgprot (_PAGE_PRESENT | _PAGE_VALID | \ - _PAGE_CACHE | \ - __ACCESS_BITS | _PAGE_WRITE) +extern struct page *mem_map_zero; +#define ZERO_PAGE(vaddr) (mem_map_zero) -#define PAGE_COPY_NOEXEC __pgprot (_PAGE_PRESENT | _PAGE_VALID | \ - _PAGE_CACHE | __ACCESS_BITS) +/* PFNs are real physical page numbers. However, mem_map only begins to record + * per-page information starting at pfn_base. This is to handle systems where + * the first physical page in the machine is at some huge physical address, + * such as 4GB. This is common on a partitioned E10000, for example. + */ +static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot) +{ + unsigned long paddr = pfn << PAGE_SHIFT; + unsigned long sz_bits; + + sz_bits = 0UL; + if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) { + __asm__ __volatile__( + "\n661: sethi %uhi(%1), %0\n" + " sllx %0, 32, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " nop\n" + " .previous\n" + : "=r" (sz_bits) + : "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V)); + } + return __pte(paddr | sz_bits | pgprot_val(prot)); +} +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define PAGE_READONLY_NOEXEC __pgprot (_PAGE_PRESENT | _PAGE_VALID | \ - _PAGE_CACHE | __ACCESS_BITS) +/* This one can be done with two shifts. */ +static inline unsigned long pte_pfn(pte_t pte) +{ + unsigned long ret; + + __asm__ __volatile__( + "\n661: sllx %1, %2, %0\n" + " srlx %0, %3, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sllx %1, %4, %0\n" + " srlx %0, %5, %0\n" + " .previous\n" + : "=r" (ret) + : "r" (pte_val(pte)), + "i" (21), "i" (21 + PAGE_SHIFT), + "i" (8), "i" (8 + PAGE_SHIFT)); + + return ret; +} +#define pte_page(x) pfn_to_page(pte_pfn(x)) -#define _PFN_MASK _PAGE_PADDR +static inline pte_t pte_modify(pte_t pte, pgprot_t prot) +{ + unsigned long mask, tmp; + + /* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347) + * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8) + * + * Even if we use negation tricks the result is still a 6 + * instruction sequence, so don't try to play fancy and just + * do the most straightforward implementation. + * + * Note: We encode this into 3 sun4v 2-insn patch sequences. + */ -#define pg_iobits (_PAGE_VALID | _PAGE_PRESENT | __DIRTY_BITS | \ - __ACCESS_BITS | _PAGE_E) + __asm__ __volatile__( + "\n661: sethi %%uhi(%2), %1\n" + " sethi %%hi(%2), %0\n" + "\n662: or %1, %%ulo(%2), %1\n" + " or %0, %%lo(%2), %0\n" + "\n663: sllx %1, 32, %1\n" + " or %0, %1, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%3), %1\n" + " sethi %%hi(%3), %0\n" + " .word 662b\n" + " or %1, %%ulo(%3), %1\n" + " or %0, %%lo(%3), %0\n" + " .word 663b\n" + " sllx %1, 32, %1\n" + " or %0, %1, %0\n" + " .previous\n" + : "=r" (mask), "=r" (tmp) + : "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U | + _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U | + _PAGE_SZBITS_4U), + "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V | + _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V | + _PAGE_SZBITS_4V)); + + return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask)); +} -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY_NOEXEC -#define __P010 PAGE_COPY_NOEXEC -#define __P011 PAGE_COPY_NOEXEC -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY +static inline pte_t pgoff_to_pte(unsigned long off) +{ + off <<= PAGE_SHIFT; + + __asm__ __volatile__( + "\n661: or %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " or %0, %3, %0\n" + " .previous\n" + : "=r" (off) + : "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V)); + + return __pte(off); +} -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY_NOEXEC -#define __S010 PAGE_SHARED_NOEXEC -#define __S011 PAGE_SHARED_NOEXEC -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED +static inline pgprot_t pgprot_noncached(pgprot_t prot) +{ + unsigned long val = pgprot_val(prot); + + __asm__ __volatile__( + "\n661: andn %0, %2, %0\n" + " or %0, %3, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " andn %0, %4, %0\n" + " or %0, %3, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U), + "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V)); + + return __pgprot(val); +} +/* Various pieces of code check for platform support by ifdef testing + * on "pgprot_noncached". That's broken and should be fixed, but for + * now... + */ +#define pgprot_noncached pgprot_noncached -#ifndef __ASSEMBLY__ +#ifdef CONFIG_HUGETLB_PAGE +static inline pte_t pte_mkhuge(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: sethi %%uhi(%1), %0\n" + " sllx %0, 32, %0\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " nop\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V)); + + return __pte(pte_val(pte) | mask); +} +#endif -extern unsigned long phys_base; -extern unsigned long pfn_base; +static inline pte_t pte_mkdirty(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: or %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " or %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U), + "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V)); + + return __pte(val); +} -extern struct page *mem_map_zero; -#define ZERO_PAGE(vaddr) (mem_map_zero) +static inline pte_t pte_mkclean(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: andn %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " andn %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U), + "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V)); + + return __pte(val); +} -/* PFNs are real physical page numbers. However, mem_map only begins to record - * per-page information starting at pfn_base. This is to handle systems where - * the first physical page in the machine is at some huge physical address, - * such as 4GB. This is common on a partitioned E10000, for example. - */ +static inline pte_t pte_mkwrite(pte_t pte) +{ + unsigned long val = pte_val(pte), mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V)); + + return __pte(val | mask); +} -#define pfn_pte(pfn, prot) \ - __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot) | _PAGE_SZBITS) -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) +static inline pte_t pte_wrprotect(pte_t pte) +{ + unsigned long val = pte_val(pte), tmp; + + __asm__ __volatile__( + "\n661: andn %0, %3, %0\n" + " nop\n" + "\n662: nop\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%4), %1\n" + " sllx %1, 32, %1\n" + " .word 662b\n" + " or %1, %%lo(%4), %1\n" + " andn %0, %1, %0\n" + " .previous\n" + : "=r" (val), "=r" (tmp) + : "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U), + "i" (_PAGE_WRITE_4V | _PAGE_W_4V)); + + return __pte(val); +} + +static inline pte_t pte_mkold(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + mask |= _PAGE_R; + + return __pte(pte_val(pte) & ~mask); +} + +static inline pte_t pte_mkyoung(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + mask |= _PAGE_R; + + return __pte(pte_val(pte) | mask); +} -#define pte_pfn(x) ((pte_val(x) & _PAGE_PADDR)>>PAGE_SHIFT) -#define pte_page(x) pfn_to_page(pte_pfn(x)) +static inline unsigned long pte_young(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V)); + + return (pte_val(pte) & mask); +} + +static inline unsigned long pte_dirty(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V)); + + return (pte_val(pte) & mask); +} -static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) +static inline unsigned long pte_write(pte_t pte) { - pte_t __pte; - const unsigned long preserve_mask = (_PFN_MASK | - _PAGE_MODIFIED | _PAGE_ACCESSED | - _PAGE_CACHE | _PAGE_E | - _PAGE_PRESENT | _PAGE_SZBITS); + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V)); + + return (pte_val(pte) & mask); +} - pte_val(__pte) = (pte_val(orig_pte) & preserve_mask) | - (pgprot_val(new_prot) & ~preserve_mask); +static inline unsigned long pte_exec(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: sethi %%hi(%1), %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " mov %2, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V)); + + return (pte_val(pte) & mask); +} - return __pte; +static inline unsigned long pte_read(pte_t pte) +{ + unsigned long mask; + + __asm__ __volatile__( + "\n661: mov %1, %0\n" + " nop\n" + " .section .sun4v_2insn_patch, \"ax\"\n" + " .word 661b\n" + " sethi %%uhi(%2), %0\n" + " sllx %0, 32, %0\n" + " .previous\n" + : "=r" (mask) + : "i" (_PAGE_READ_4U), "i" (_PAGE_READ_4V)); + + return (pte_val(pte) & mask); } + +static inline unsigned long pte_file(pte_t pte) +{ + unsigned long val = pte_val(pte); + + __asm__ __volatile__( + "\n661: and %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " and %0, %3, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V)); + + return val; +} + +static inline unsigned long pte_present(pte_t pte) +{ + unsigned long val = pte_val(pte); + + __asm__ __volatile__( + "\n661: and %0, %2, %0\n" + " .section .sun4v_1insn_patch, \"ax\"\n" + " .word 661b\n" + " and %0, %3, %0\n" + " .previous\n" + : "=r" (val) + : "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V)); + + return val; +} + #define pmd_set(pmdp, ptep) \ (pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL)) #define pud_set(pudp, pmdp) \ @@ -253,8 +631,6 @@ static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) #define pmd_page(pmd) virt_to_page((void *)__pmd_page(pmd)) #define pud_page(pud) \ ((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL))) -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_bad(pmd) (0) #define pmd_present(pmd) (pmd_val(pmd) != 0U) @@ -264,30 +640,8 @@ static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) #define pud_present(pud) (pud_val(pud) != 0U) #define pud_clear(pudp) (pud_val(*(pudp)) = 0U) -/* The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -#define pte_read(pte) (pte_val(pte) & _PAGE_READ) -#define pte_exec(pte) (pte_val(pte) & _PAGE_EXEC) -#define pte_write(pte) (pte_val(pte) & _PAGE_WRITE) -#define pte_dirty(pte) (pte_val(pte) & _PAGE_MODIFIED) -#define pte_young(pte) (pte_val(pte) & _PAGE_ACCESSED) -#define pte_wrprotect(pte) (__pte(pte_val(pte) & ~(_PAGE_WRITE|_PAGE_W))) -#define pte_rdprotect(pte) \ - (__pte(((pte_val(pte)<<1UL)>>1UL) & ~_PAGE_READ)) -#define pte_mkclean(pte) \ - (__pte(pte_val(pte) & ~(_PAGE_MODIFIED|_PAGE_W))) -#define pte_mkold(pte) \ - (__pte(((pte_val(pte)<<1UL)>>1UL) & ~_PAGE_ACCESSED)) - -/* Permanent address of a page. */ -#define __page_address(page) page_address(page) - -/* Be very careful when you change these three, they are delicate. */ -#define pte_mkyoung(pte) (__pte(pte_val(pte) | _PAGE_ACCESSED | _PAGE_R)) -#define pte_mkwrite(pte) (__pte(pte_val(pte) | _PAGE_WRITE)) -#define pte_mkdirty(pte) (__pte(pte_val(pte) | _PAGE_MODIFIED | _PAGE_W)) -#define pte_mkhuge(pte) (__pte(pte_val(pte) | _PAGE_SZHUGE)) +/* Same in both SUN4V and SUN4U. */ +#define pte_none(pte) (!pte_val(pte)) /* to find an entry in a page-table-directory. */ #define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) @@ -296,11 +650,6 @@ static inline pte_t pte_modify(pte_t orig_pte, pgprot_t new_prot) /* to find an entry in a kernel page-table-directory */ #define pgd_offset_k(address) pgd_offset(&init_mm, address) -/* extract the pgd cache used for optimizing the tlb miss - * slow path when executing 32-bit compat processes - */ -#define get_pgd_cache(pgd) ((unsigned long) pgd_val(*pgd) << 11) - /* Find an entry in the second-level page table.. */ #define pmd_offset(pudp, address) \ ((pmd_t *) pud_page(*(pudp)) + \ @@ -327,6 +676,9 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *p /* It is more efficient to let flush_tlb_kernel_range() * handle init_mm tlb flushes. + * + * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U + * and SUN4V pte layout, so this inline test is fine. */ if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID)) tlb_batch_add(mm, addr, ptep, orig); @@ -361,42 +713,23 @@ extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) /* File offset in PTE support. */ -#define pte_file(pte) (pte_val(pte) & _PAGE_FILE) +extern unsigned long pte_file(pte_t); #define pte_to_pgoff(pte) (pte_val(pte) >> PAGE_SHIFT) -#define pgoff_to_pte(off) (__pte(((off) << PAGE_SHIFT) | _PAGE_FILE)) +extern pte_t pgoff_to_pte(unsigned long); #define PTE_FILE_MAX_BITS (64UL - PAGE_SHIFT - 1UL) extern unsigned long prom_virt_to_phys(unsigned long, int *); -static __inline__ unsigned long -sun4u_get_pte (unsigned long addr) -{ - pgd_t *pgdp; - pud_t *pudp; - pmd_t *pmdp; - pte_t *ptep; - - if (addr >= PAGE_OFFSET) - return addr & _PAGE_PADDR; - if ((addr >= LOW_OBP_ADDRESS) && (addr < HI_OBP_ADDRESS)) - return prom_virt_to_phys(addr, NULL); - pgdp = pgd_offset_k(addr); - pudp = pud_offset(pgdp, addr); - pmdp = pmd_offset(pudp, addr); - ptep = pte_offset_kernel(pmdp, addr); - return pte_val(*ptep) & _PAGE_PADDR; -} +extern unsigned long sun4u_get_pte(unsigned long); -static __inline__ unsigned long -__get_phys (unsigned long addr) +static inline unsigned long __get_phys(unsigned long addr) { - return sun4u_get_pte (addr); + return sun4u_get_pte(addr); } -static __inline__ int -__get_iospace (unsigned long addr) +static inline int __get_iospace(unsigned long addr) { - return ((sun4u_get_pte (addr) & 0xf0000000) >> 28); + return ((sun4u_get_pte(addr) & 0xf0000000) >> 28); } extern unsigned long *sparc64_valid_addr_bitmap; @@ -409,11 +742,6 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, unsigned long pfn, unsigned long size, pgprot_t prot); -/* Clear virtual and physical cachability, set side-effect bit. */ -#define pgprot_noncached(prot) \ - (__pgprot((pgprot_val(prot) & ~(_PAGE_CP | _PAGE_CV)) | \ - _PAGE_E)) - /* * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in * its high 4 bits. These macros/functions put it there or get it from there. @@ -424,8 +752,11 @@ extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from, #include <asm-generic/pgtable.h> -/* We provide our own get_unmapped_area to cope with VA holes for userland */ +/* We provide our own get_unmapped_area to cope with VA holes and + * SHM area cache aliasing for userland. + */ #define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN /* We provide a special get_unmapped_area for framebuffer mmaps to try and use * the largest alignment possible such that larget PTEs can be used. @@ -435,12 +766,9 @@ extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long, unsigned long); #define HAVE_ARCH_FB_UNMAPPED_AREA -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -extern void check_pgt_cache(void); +extern void pgtable_cache_init(void); +extern void sun4v_register_fault_status(void); +extern void sun4v_ktsb_register(void); #endif /* !(__ASSEMBLY__) */ diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h index 8f87750c3517..79f827eb3f5d 100644 --- a/include/asm-sparc64/pil.h +++ b/include/asm-sparc64/pil.h @@ -16,11 +16,13 @@ #define PIL_SMP_CALL_FUNC 1 #define PIL_SMP_RECEIVE_SIGNAL 2 #define PIL_SMP_CAPTURE 3 +#define PIL_SMP_CTX_NEW_VERSION 4 #ifndef __ASSEMBLY__ #define PIL_RESERVED(PIL) ((PIL) == PIL_SMP_CALL_FUNC || \ (PIL) == PIL_SMP_RECEIVE_SIGNAL || \ - (PIL) == PIL_SMP_CAPTURE) + (PIL) == PIL_SMP_CAPTURE || \ + (PIL) == PIL_SMP_CTX_NEW_VERSION) #endif #endif /* !(_SPARC64_PIL_H) */ diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h index cd8d9b4c8658..c6896b88283e 100644 --- a/include/asm-sparc64/processor.h +++ b/include/asm-sparc64/processor.h @@ -28,6 +28,8 @@ * User lives in his very own context, and cannot reference us. Note * that TASK_SIZE is a misnomer, it really gives maximum user virtual * address that the kernel will allocate out. + * + * XXX No longer using virtual page tables, kill this upper limit... */ #define VA_BITS 44 #ifndef __ASSEMBLY__ @@ -37,18 +39,6 @@ #endif #define TASK_SIZE ((unsigned long)-VPTE_SIZE) -/* - * The vpte base must be able to hold the entire vpte, half - * of which lives above, and half below, the base. And it - * is placed as close to the highest address range as possible. - */ -#define VPTE_BASE_SPITFIRE (-(VPTE_SIZE/2)) -#if 1 -#define VPTE_BASE_CHEETAH VPTE_BASE_SPITFIRE -#else -#define VPTE_BASE_CHEETAH 0xffe0000000000000 -#endif - #ifndef __ASSEMBLY__ typedef struct { @@ -101,7 +91,8 @@ extern unsigned long thread_saved_pc(struct task_struct *); /* Do necessary setup to start up a newly executed thread. */ #define start_thread(regs, pc, sp) \ do { \ - regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (ASI_PNF << 24); \ + unsigned long __asi = ASI_PNF; \ + regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \ regs->tpc = ((pc & (~3)) - 4); \ regs->tnpc = regs->tpc + 4; \ regs->y = 0; \ @@ -138,10 +129,10 @@ do { \ #define start_thread32(regs, pc, sp) \ do { \ + unsigned long __asi = ASI_PNF; \ pc &= 0x00000000ffffffffUL; \ sp &= 0x00000000ffffffffUL; \ -\ - regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM); \ + regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \ regs->tpc = ((pc & (~3)) - 4); \ regs->tnpc = regs->tpc + 4; \ regs->y = 0; \ @@ -226,6 +217,8 @@ static inline void prefetchw(const void *x) #define spin_lock_prefetch(x) prefetchw(x) +#define HAVE_ARCH_PICK_MMAP_LAYOUT + #endif /* !(__ASSEMBLY__) */ #endif /* !(__ASM_SPARC64_PROCESSOR_H) */ diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h index 29fb74aa805d..49a7924a89ab 100644 --- a/include/asm-sparc64/pstate.h +++ b/include/asm-sparc64/pstate.h @@ -28,11 +28,12 @@ /* The V9 TSTATE Register (with SpitFire and Linux extensions). * - * --------------------------------------------------------------- - * | Resv | CCR | ASI | %pil | PSTATE | Resv | CWP | - * --------------------------------------------------------------- - * 63 40 39 32 31 24 23 20 19 8 7 5 4 0 + * --------------------------------------------------------------------- + * | Resv | GL | CCR | ASI | %pil | PSTATE | Resv | CWP | + * --------------------------------------------------------------------- + * 63 43 42 40 39 32 31 24 23 20 19 8 7 5 4 0 */ +#define TSTATE_GL _AC(0x0000070000000000,UL) /* Global reg level */ #define TSTATE_CCR _AC(0x000000ff00000000,UL) /* Condition Codes. */ #define TSTATE_XCC _AC(0x000000f000000000,UL) /* Condition Codes. */ #define TSTATE_XNEG _AC(0x0000008000000000,UL) /* %xcc Negative. */ diff --git a/include/asm-sparc64/scratchpad.h b/include/asm-sparc64/scratchpad.h new file mode 100644 index 000000000000..5e8b01fb3343 --- /dev/null +++ b/include/asm-sparc64/scratchpad.h @@ -0,0 +1,14 @@ +#ifndef _SPARC64_SCRATCHPAD_H +#define _SPARC64_SCRATCHPAD_H + +/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD. */ + +#define SCRATCHPAD_MMU_MISS 0x00 /* Shared with OBP - set by OBP */ +#define SCRATCHPAD_CPUID 0x08 /* Shared with OBP - set by hypervisor */ +#define SCRATCHPAD_UTSBREG1 0x10 +#define SCRATCHPAD_UTSBREG2 0x18 + /* 0x20 and 0x28, hypervisor only... */ +#define SCRATCHPAD_UNUSED1 0x30 +#define SCRATCHPAD_UNUSED2 0x38 /* Reserved for OBP */ + +#endif /* !(_SPARC64_SCRATCHPAD_H) */ diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h index 473edb2603ec..89d86ecaab24 100644 --- a/include/asm-sparc64/smp.h +++ b/include/asm-sparc64/smp.h @@ -33,37 +33,13 @@ extern cpumask_t phys_cpu_present_map; #define cpu_possible_map phys_cpu_present_map +extern cpumask_t cpu_sibling_map[NR_CPUS]; + /* * General functions that each host system must provide. */ -static __inline__ int hard_smp_processor_id(void) -{ - if (tlb_type == cheetah || tlb_type == cheetah_plus) { - unsigned long cfg, ver; - __asm__ __volatile__("rdpr %%ver, %0" : "=r" (ver)); - if ((ver >> 32) == 0x003e0016) { - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (cfg) - : "i" (ASI_JBUS_CONFIG)); - return ((cfg >> 17) & 0x1f); - } else { - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (cfg) - : "i" (ASI_SAFARI_CONFIG)); - return ((cfg >> 17) & 0x3ff); - } - } else if (this_is_starfire != 0) { - return starfire_hard_smp_processor_id(); - } else { - unsigned long upaconfig; - __asm__ __volatile__("ldxa [%%g0] %1, %0" - : "=r" (upaconfig) - : "i" (ASI_UPA_CONFIG)); - return ((upaconfig >> 17) & 0x1f); - } -} - +extern int hard_smp_processor_id(void); #define raw_smp_processor_id() (current_thread_info()->cpu) extern void smp_setup_cpu_possible_map(void); diff --git a/include/asm-sparc64/sparsemem.h b/include/asm-sparc64/sparsemem.h new file mode 100644 index 000000000000..ed5c9d8541e2 --- /dev/null +++ b/include/asm-sparc64/sparsemem.h @@ -0,0 +1,12 @@ +#ifndef _SPARC64_SPARSEMEM_H +#define _SPARC64_SPARSEMEM_H + +#ifdef __KERNEL__ + +#define SECTION_SIZE_BITS 26 +#define MAX_PHYSADDR_BITS 42 +#define MAX_PHYSMEM_BITS 42 + +#endif /* !(__KERNEL__) */ + +#endif /* !(_SPARC64_SPARSEMEM_H) */ diff --git a/include/asm-sparc64/spitfire.h b/include/asm-sparc64/spitfire.h index 962638c9d122..23ad8a7987ad 100644 --- a/include/asm-sparc64/spitfire.h +++ b/include/asm-sparc64/spitfire.h @@ -44,6 +44,7 @@ enum ultra_tlb_layout { spitfire = 0, cheetah = 1, cheetah_plus = 2, + hypervisor = 3, }; extern enum ultra_tlb_layout tlb_type; diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h index af254e581834..a18ec87a52c1 100644 --- a/include/asm-sparc64/system.h +++ b/include/asm-sparc64/system.h @@ -209,9 +209,10 @@ do { if (test_thread_flag(TIF_PERFCTR)) { \ /* so that ASI is only written if it changes, think again. */ \ __asm__ __volatile__("wr %%g0, %0, %%asi" \ : : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\ + trap_block[current_thread_info()->cpu].thread = \ + task_thread_info(next); \ __asm__ __volatile__( \ "mov %%g4, %%g7\n\t" \ - "wrpr %%g0, 0x95, %%pstate\n\t" \ "stx %%i6, [%%sp + 2047 + 0x70]\n\t" \ "stx %%i7, [%%sp + 2047 + 0x78]\n\t" \ "rdpr %%wstate, %%o5\n\t" \ @@ -225,14 +226,10 @@ do { if (test_thread_flag(TIF_PERFCTR)) { \ "ldx [%%g6 + %3], %%o6\n\t" \ "ldub [%%g6 + %2], %%o5\n\t" \ "ldub [%%g6 + %4], %%o7\n\t" \ - "mov %%g6, %%l2\n\t" \ "wrpr %%o5, 0x0, %%wstate\n\t" \ "ldx [%%sp + 2047 + 0x70], %%i6\n\t" \ "ldx [%%sp + 2047 + 0x78], %%i7\n\t" \ - "wrpr %%g0, 0x94, %%pstate\n\t" \ - "mov %%l2, %%g6\n\t" \ "ldx [%%g6 + %6], %%g4\n\t" \ - "wrpr %%g0, 0x96, %%pstate\n\t" \ "brz,pt %%o7, 1f\n\t" \ " mov %%g7, %0\n\t" \ "b,a ret_from_syscall\n\t" \ diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h index ac9d068aab4f..2ebf7f27bf91 100644 --- a/include/asm-sparc64/thread_info.h +++ b/include/asm-sparc64/thread_info.h @@ -64,8 +64,6 @@ struct thread_info { __u64 kernel_cntd0, kernel_cntd1; __u64 pcr_reg; - __u64 cee_stuff; - struct restart_block restart_block; struct pt_regs *kern_una_regs; @@ -104,10 +102,9 @@ struct thread_info { #define TI_KERN_CNTD0 0x00000480 #define TI_KERN_CNTD1 0x00000488 #define TI_PCR 0x00000490 -#define TI_CEE_STUFF 0x00000498 -#define TI_RESTART_BLOCK 0x000004a0 -#define TI_KUNA_REGS 0x000004c8 -#define TI_KUNA_INSN 0x000004d0 +#define TI_RESTART_BLOCK 0x00000498 +#define TI_KUNA_REGS 0x000004c0 +#define TI_KUNA_INSN 0x000004c8 #define TI_FPREGS 0x00000500 /* We embed this in the uppermost byte of thread_info->flags */ diff --git a/include/asm-sparc64/timex.h b/include/asm-sparc64/timex.h index 9e8d4175bcb2..2a5e4ebaad80 100644 --- a/include/asm-sparc64/timex.h +++ b/include/asm-sparc64/timex.h @@ -14,4 +14,10 @@ typedef unsigned long cycles_t; #define get_cycles() tick_ops->get_tick() +#define ARCH_HAS_READ_CURRENT_TIMER 1 +#define read_current_timer(timer_val_p) \ +({ *timer_val_p = tick_ops->get_tick(); \ + 0; \ +}) + #endif diff --git a/include/asm-sparc64/tlbflush.h b/include/asm-sparc64/tlbflush.h index 3ef9909ac3ac..9ad5d9c51d42 100644 --- a/include/asm-sparc64/tlbflush.h +++ b/include/asm-sparc64/tlbflush.h @@ -5,6 +5,11 @@ #include <linux/mm.h> #include <asm/mmu_context.h> +/* TSB flush operations. */ +struct mmu_gather; +extern void flush_tsb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tsb_user(struct mmu_gather *mp); + /* TLB flush operations. */ extern void flush_tlb_pending(void); @@ -14,28 +19,36 @@ extern void flush_tlb_pending(void); #define flush_tlb_page(vma,addr) flush_tlb_pending() #define flush_tlb_mm(mm) flush_tlb_pending() +/* Local cpu only. */ extern void __flush_tlb_all(void); + extern void __flush_tlb_page(unsigned long context, unsigned long page, unsigned long r); extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end); #ifndef CONFIG_SMP -#define flush_tlb_all() __flush_tlb_all() #define flush_tlb_kernel_range(start,end) \ - __flush_tlb_kernel_range(start,end) +do { flush_tsb_kernel_range(start,end); \ + __flush_tlb_kernel_range(start,end); \ +} while (0) #else /* CONFIG_SMP */ -extern void smp_flush_tlb_all(void); extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end); -#define flush_tlb_all() smp_flush_tlb_all() #define flush_tlb_kernel_range(start, end) \ - smp_flush_tlb_kernel_range(start, end) +do { flush_tsb_kernel_range(start,end); \ + smp_flush_tlb_kernel_range(start, end); \ +} while (0) #endif /* ! CONFIG_SMP */ -extern void flush_tlb_pgtables(struct mm_struct *, unsigned long, unsigned long); +static inline void flush_tlb_pgtables(struct mm_struct *mm, unsigned long start, unsigned long end) +{ + /* We don't use virtual page tables for TLB miss processing + * any more. Nowadays we use the TSB. + */ +} #endif /* _SPARC64_TLBFLUSH_H */ diff --git a/include/asm-sparc64/tsb.h b/include/asm-sparc64/tsb.h new file mode 100644 index 000000000000..e82612cd9f33 --- /dev/null +++ b/include/asm-sparc64/tsb.h @@ -0,0 +1,281 @@ +#ifndef _SPARC64_TSB_H +#define _SPARC64_TSB_H + +/* The sparc64 TSB is similar to the powerpc hashtables. It's a + * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes + * pointers into this table for 8K and 64K page sizes, and also a + * comparison TAG based upon the virtual address and context which + * faults. + * + * TLB miss trap handler software does the actual lookup via something + * of the form: + * + * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1 + * ldxa [%g0] ASI_{D,I}MMU, %g6 + * sllx %g6, 22, %g6 + * srlx %g6, 22, %g6 + * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 + * cmp %g4, %g6 + * bne,pn %xcc, tsb_miss_{d,i}tlb + * mov FAULT_CODE_{D,I}TLB, %g3 + * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN + * retry + * + * + * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte + * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu + * register which is: + * + * ------------------------------------------------- + * | - | CONTEXT | - | VADDR bits 63:22 | + * ------------------------------------------------- + * 63 61 60 48 47 42 41 0 + * + * But actually, since we use per-mm TSB's, we zero out the CONTEXT + * field. + * + * Like the powerpc hashtables we need to use locking in order to + * synchronize while we update the entries. PTE updates need locking + * as well. + * + * We need to carefully choose a lock bits for the TSB entry. We + * choose to use bit 47 in the tag. Also, since we never map anything + * at page zero in context zero, we use zero as an invalid tag entry. + * When the lock bit is set, this forces a tag comparison failure. + */ + +#define TSB_TAG_LOCK_BIT 47 +#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32)) + +#define TSB_TAG_INVALID_BIT 46 +#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32)) + +#define TSB_MEMBAR membar #StoreStore + +/* Some cpus support physical address quad loads. We want to use + * those if possible so we don't need to hard-lock the TSB mapping + * into the TLB. We encode some instruction patching in order to + * support this. + * + * The kernel TSB is locked into the TLB by virtue of being in the + * kernel image, so we don't play these games for swapper_tsb access. + */ +#ifndef __ASSEMBLY__ +struct tsb_ldquad_phys_patch_entry { + unsigned int addr; + unsigned int sun4u_insn; + unsigned int sun4v_insn; +}; +extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch, + __tsb_ldquad_phys_patch_end; + +struct tsb_phys_patch_entry { + unsigned int addr; + unsigned int insn; +}; +extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; +#endif +#define TSB_LOAD_QUAD(TSB, REG) \ +661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \ + .section .tsb_ldquad_phys_patch, "ax"; \ + .word 661b; \ + ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \ + ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \ + .previous + +#define TSB_LOAD_TAG_HIGH(TSB, REG) \ +661: lduwa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + lduwa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_LOAD_TAG(TSB, REG) \ +661: ldxa [TSB] ASI_N, REG; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + ldxa [TSB] ASI_PHYS_USE_EC, REG; \ + .previous + +#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \ +661: casa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_CAS_TAG(TSB, REG1, REG2) \ +661: casxa [TSB] ASI_N, REG1, REG2; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ + .previous + +#define TSB_STORE(ADDR, VAL) \ +661: stxa VAL, [ADDR] ASI_N; \ + .section .tsb_phys_patch, "ax"; \ + .word 661b; \ + stxa VAL, [ADDR] ASI_PHYS_USE_EC; \ + .previous + +#define TSB_LOCK_TAG(TSB, REG1, REG2) \ +99: TSB_LOAD_TAG_HIGH(TSB, REG1); \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define TSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + TSB_STORE(TSB, TTE); \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + TSB_STORE(TSB, TAG); + +#define KTSB_LOAD_QUAD(TSB, REG) \ + ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; + +#define KTSB_STORE(ADDR, VAL) \ + stxa VAL, [ADDR] ASI_N; + +#define KTSB_LOCK_TAG(TSB, REG1, REG2) \ +99: lduwa [TSB] ASI_N, REG1; \ + sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ + andcc REG1, REG2, %g0; \ + bne,pn %icc, 99b; \ + nop; \ + casa [TSB] ASI_N, REG1, REG2;\ + cmp REG1, REG2; \ + bne,pn %icc, 99b; \ + nop; \ + TSB_MEMBAR + +#define KTSB_WRITE(TSB, TTE, TAG) \ + add TSB, 0x8, TSB; \ + stxa TTE, [TSB] ASI_N; \ + sub TSB, 0x8, TSB; \ + TSB_MEMBAR; \ + stxa TAG, [TSB] ASI_N; + + /* Do a kernel page table walk. Leaves physical PTE pointer in + * REG1. Jumps to FAIL_LABEL on early page table walk termination. + * VADDR will not be clobbered, but REG2 will. + */ +#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \ + sethi %hi(swapper_pg_dir), REG1; \ + or REG1, %lo(swapper_pg_dir), REG1; \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduw [REG1 + REG2], REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + + /* Do a user page table walk in MMU globals. Leaves physical PTE + * pointer in REG1. Jumps to FAIL_LABEL on early page table walk + * termination. Physical base of page tables is in PHYS_PGD which + * will not be modified. + * + * VADDR will not be clobbered, but REG1 and REG2 will. + */ +#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \ + sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + andn REG2, 0x3, REG2; \ + lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x3, REG2; \ + lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ + brz,pn REG1, FAIL_LABEL; \ + sllx VADDR, 64 - PMD_SHIFT, REG2; \ + srlx REG2, 64 - PAGE_SHIFT, REG2; \ + sllx REG1, 11, REG1; \ + andn REG2, 0x7, REG2; \ + add REG1, REG2, REG1; + +/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0. + * If no entry is found, FAIL_LABEL will be branched to. On success + * the resulting PTE value will be left in REG1. VADDR is preserved + * by this routine. + */ +#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \ + sethi %hi(prom_trans), REG1; \ + or REG1, %lo(prom_trans), REG1; \ +97: ldx [REG1 + 0x00], REG2; \ + brz,pn REG2, FAIL_LABEL; \ + nop; \ + ldx [REG1 + 0x08], REG3; \ + add REG2, REG3, REG3; \ + cmp REG2, VADDR; \ + bgu,pt %xcc, 98f; \ + cmp VADDR, REG3; \ + bgeu,pt %xcc, 98f; \ + ldx [REG1 + 0x10], REG3; \ + sub VADDR, REG2, REG2; \ + ba,pt %xcc, 99f; \ + add REG3, REG2, REG1; \ +98: ba,pt %xcc, 97b; \ + add REG1, (3 * 8), REG1; \ +99: + + /* We use a 32K TSB for the whole kernel, this allows to + * handle about 16MB of modules and vmalloc mappings without + * incurring many hash conflicts. + */ +#define KERNEL_TSB_SIZE_BYTES (32 * 1024) +#define KERNEL_TSB_NENTRIES \ + (KERNEL_TSB_SIZE_BYTES / 16) +#define KERNEL_TSB4M_NENTRIES 4096 + + /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL + * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries + * and the found TTE will be left in REG1. REG3 and REG4 must + * be an even/odd pair of registers. + * + * VADDR and TAG will be preserved and not clobbered by this macro. + */ +#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_tsb), REG1; \ + or REG1, %lo(swapper_tsb), REG1; \ + srlx VADDR, PAGE_SHIFT, REG2; \ + and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; + + /* This version uses a trick, the TAG is already (VADDR >> 22) so + * we can make use of that for the index computation. + */ +#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ + sethi %hi(swapper_4m_tsb), REG1; \ + or REG1, %lo(swapper_4m_tsb), REG1; \ + and TAG, (KERNEL_TSB_NENTRIES - 1), REG2; \ + sllx REG2, 4, REG2; \ + add REG1, REG2, REG2; \ + KTSB_LOAD_QUAD(REG2, REG3); \ + cmp REG3, TAG; \ + be,a,pt %xcc, OK_LABEL; \ + mov REG4, REG1; + +#endif /* !(_SPARC64_TSB_H) */ diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index 2784f80094c3..2d5e3c464df5 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -93,7 +93,7 @@ #define SYSCALL_TRAP(routine, systbl) \ sethi %hi(109f), %g7; \ - ba,pt %xcc, scetrap; \ + ba,pt %xcc, etrap; \ 109: or %g7, %lo(109b), %g7; \ sethi %hi(systbl), %l7; \ ba,pt %xcc, routine; \ @@ -109,14 +109,14 @@ nop;nop;nop; #define TRAP_UTRAP(handler,lvl) \ - ldx [%g6 + TI_UTRAPS], %g1; \ - sethi %hi(109f), %g7; \ - brz,pn %g1, utrap; \ - or %g7, %lo(109f), %g7; \ - ba,pt %xcc, utrap; \ -109: ldx [%g1 + handler*8], %g1; \ - ba,pt %xcc, utrap_ill; \ - mov lvl, %o1; + mov handler, %g3; \ + ba,pt %xcc, utrap_trap; \ + mov lvl, %g4; \ + nop; \ + nop; \ + nop; \ + nop; \ + nop; #ifdef CONFIG_SUNOS_EMUL #define SUNOS_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sunos_sys_table) @@ -136,8 +136,6 @@ #else #define SOLARIS_SYSCALL_TRAP TRAP(solaris_syscall) #endif -/* FIXME: Write these actually */ -#define NETBSD_SYSCALL_TRAP TRAP(netbsd_syscall) #define BREAKPOINT_TRAP TRAP(breakpoint_trap) #define TRAP_IRQ(routine, level) \ @@ -182,6 +180,26 @@ #define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl) #endif +#define SUN4V_ITSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_itsb_miss; \ + nop; \ + nop; \ + nop; + +#define SUN4V_DTSB_MISS \ + ldxa [%g0] ASI_SCRATCHPAD, %g2; \ + ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \ + ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \ + srlx %g4, 22, %g6; \ + ba,pt %xcc, sun4v_dtsb_miss; \ + nop; \ + nop; \ + nop; + /* Before touching these macros, you owe it to yourself to go and * see how arch/sparc64/kernel/winfixup.S works... -DaveM * @@ -221,6 +239,31 @@ saved; retry; nop; nop; nop; nop; nop; nop; \ nop; nop; nop; nop; nop; nop; nop; nop; +#define SPILL_0_NORMAL_ETRAP \ +etrap_kernel_spill: \ + stx %l0, [%sp + STACK_BIAS + 0x00]; \ + stx %l1, [%sp + STACK_BIAS + 0x08]; \ + stx %l2, [%sp + STACK_BIAS + 0x10]; \ + stx %l3, [%sp + STACK_BIAS + 0x18]; \ + stx %l4, [%sp + STACK_BIAS + 0x20]; \ + stx %l5, [%sp + STACK_BIAS + 0x28]; \ + stx %l6, [%sp + STACK_BIAS + 0x30]; \ + stx %l7, [%sp + STACK_BIAS + 0x38]; \ + stx %i0, [%sp + STACK_BIAS + 0x40]; \ + stx %i1, [%sp + STACK_BIAS + 0x48]; \ + stx %i2, [%sp + STACK_BIAS + 0x50]; \ + stx %i3, [%sp + STACK_BIAS + 0x58]; \ + stx %i4, [%sp + STACK_BIAS + 0x60]; \ + stx %i5, [%sp + STACK_BIAS + 0x68]; \ + stx %i6, [%sp + STACK_BIAS + 0x70]; \ + stx %i7, [%sp + STACK_BIAS + 0x78]; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + /* Normal 64bit spill */ #define SPILL_1_GENERIC(ASI) \ add %sp, STACK_BIAS + 0x00, %g1; \ @@ -254,6 +297,67 @@ b,a,pt %xcc, spill_fixup_mna; \ b,a,pt %xcc, spill_fixup; +#define SPILL_1_GENERIC_ETRAP \ +etrap_user_spill_64bit: \ + stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \ + stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \ + stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \ + stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \ + stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \ + stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \ + stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \ + stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \ + stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \ + stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \ + stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \ + stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \ + stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \ + stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \ + stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \ + stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; \ + ba,a,pt %xcc, etrap_spill_fixup_64bit; + +#define SPILL_1_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_64bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \ + stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \ + stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \ + stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \ + stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \ + stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \ + stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \ + stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \ + stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \ + stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \ + stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \ + stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \ + stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \ + stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \ + stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + /* Normal 32bit spill */ #define SPILL_2_GENERIC(ASI) \ srl %sp, 0, %sp; \ @@ -287,6 +391,68 @@ b,a,pt %xcc, spill_fixup_mna; \ b,a,pt %xcc, spill_fixup; +#define SPILL_2_GENERIC_ETRAP \ +etrap_user_spill_32bit: \ + srl %sp, 0, %sp; \ + stwa %l0, [%sp + 0x00] %asi; \ + stwa %l1, [%sp + 0x04] %asi; \ + stwa %l2, [%sp + 0x08] %asi; \ + stwa %l3, [%sp + 0x0c] %asi; \ + stwa %l4, [%sp + 0x10] %asi; \ + stwa %l5, [%sp + 0x14] %asi; \ + stwa %l6, [%sp + 0x18] %asi; \ + stwa %l7, [%sp + 0x1c] %asi; \ + stwa %i0, [%sp + 0x20] %asi; \ + stwa %i1, [%sp + 0x24] %asi; \ + stwa %i2, [%sp + 0x28] %asi; \ + stwa %i3, [%sp + 0x2c] %asi; \ + stwa %i4, [%sp + 0x30] %asi; \ + stwa %i5, [%sp + 0x34] %asi; \ + stwa %i6, [%sp + 0x38] %asi; \ + stwa %i7, [%sp + 0x3c] %asi; \ + saved; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; \ + nop; nop; nop; nop; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; \ + ba,a,pt %xcc, etrap_spill_fixup_32bit; + +#define SPILL_2_GENERIC_ETRAP_FIXUP \ +etrap_spill_fixup_32bit: \ + ldub [%g6 + TI_WSAVED], %g1; \ + sll %g1, 3, %g3; \ + add %g6, %g3, %g3; \ + stx %sp, [%g3 + TI_RWIN_SPTRS]; \ + sll %g1, 7, %g3; \ + add %g6, %g3, %g3; \ + stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \ + stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \ + stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \ + stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \ + stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \ + stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \ + stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \ + stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \ + stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \ + stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \ + stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \ + stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \ + stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \ + stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \ + stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \ + stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \ + add %g1, 1, %g1; \ + stb %g1, [%g6 + TI_WSAVED]; \ + saved; \ + rdpr %cwp, %g1; \ + sub %g1, 2, %g1; \ + ba,pt %xcc, etrap_save; \ + wrpr %g1, %cwp; \ + nop; nop; nop + #define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP) #define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP) #define SPILL_3_NORMAL SPILL_0_NORMAL @@ -325,6 +491,35 @@ restored; retry; nop; nop; nop; nop; nop; nop; \ nop; nop; nop; nop; nop; nop; nop; nop; +#define FILL_0_NORMAL_RTRAP \ +kern_rtt_fill: \ + rdpr %cwp, %g1; \ + sub %g1, 1, %g1; \ + wrpr %g1, %cwp; \ + ldx [%sp + STACK_BIAS + 0x00], %l0; \ + ldx [%sp + STACK_BIAS + 0x08], %l1; \ + ldx [%sp + STACK_BIAS + 0x10], %l2; \ + ldx [%sp + STACK_BIAS + 0x18], %l3; \ + ldx [%sp + STACK_BIAS + 0x20], %l4; \ + ldx [%sp + STACK_BIAS + 0x28], %l5; \ + ldx [%sp + STACK_BIAS + 0x30], %l6; \ + ldx [%sp + STACK_BIAS + 0x38], %l7; \ + ldx [%sp + STACK_BIAS + 0x40], %i0; \ + ldx [%sp + STACK_BIAS + 0x48], %i1; \ + ldx [%sp + STACK_BIAS + 0x50], %i2; \ + ldx [%sp + STACK_BIAS + 0x58], %i3; \ + ldx [%sp + STACK_BIAS + 0x60], %i4; \ + ldx [%sp + STACK_BIAS + 0x68], %i5; \ + ldx [%sp + STACK_BIAS + 0x70], %i6; \ + ldx [%sp + STACK_BIAS + 0x78], %i7; \ + restored; \ + add %g1, 1, %g1; \ + ba,pt %xcc, kern_rtt_restore; \ + wrpr %g1, %cwp; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; + + /* Normal 64bit fill */ #define FILL_1_GENERIC(ASI) \ add %sp, STACK_BIAS + 0x00, %g1; \ @@ -356,6 +551,33 @@ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; +#define FILL_1_GENERIC_RTRAP \ +user_rtt_fill_64bit: \ + ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \ + ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \ + ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \ + ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \ + ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \ + ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \ + ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \ + ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \ + ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \ + ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \ + ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \ + ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \ + ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \ + ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \ + ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \ + ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + /* Normal 32bit fill */ #define FILL_2_GENERIC(ASI) \ srl %sp, 0, %sp; \ @@ -387,6 +609,34 @@ b,a,pt %xcc, fill_fixup_mna; \ b,a,pt %xcc, fill_fixup; +#define FILL_2_GENERIC_RTRAP \ +user_rtt_fill_32bit: \ + srl %sp, 0, %sp; \ + lduwa [%sp + 0x00] %asi, %l0; \ + lduwa [%sp + 0x04] %asi, %l1; \ + lduwa [%sp + 0x08] %asi, %l2; \ + lduwa [%sp + 0x0c] %asi, %l3; \ + lduwa [%sp + 0x10] %asi, %l4; \ + lduwa [%sp + 0x14] %asi, %l5; \ + lduwa [%sp + 0x18] %asi, %l6; \ + lduwa [%sp + 0x1c] %asi, %l7; \ + lduwa [%sp + 0x20] %asi, %i0; \ + lduwa [%sp + 0x24] %asi, %i1; \ + lduwa [%sp + 0x28] %asi, %i2; \ + lduwa [%sp + 0x2c] %asi, %i3; \ + lduwa [%sp + 0x30] %asi, %i4; \ + lduwa [%sp + 0x34] %asi, %i5; \ + lduwa [%sp + 0x38] %asi, %i6; \ + lduwa [%sp + 0x3c] %asi, %i7; \ + ba,pt %xcc, user_rtt_pre_restore; \ + restored; \ + nop; nop; nop; nop; nop; \ + nop; nop; nop; nop; nop; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; \ + ba,a,pt %xcc, user_rtt_fill_fixup; + + #define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP) #define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP) #define FILL_3_NORMAL FILL_0_NORMAL diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h index c91d1e38eac6..afe236ba555b 100644 --- a/include/asm-sparc64/uaccess.h +++ b/include/asm-sparc64/uaccess.h @@ -114,16 +114,6 @@ case 8: __put_user_asm(data,x,addr,__pu_ret); break; \ default: __pu_ret = __put_user_bad(); break; \ } __pu_ret; }) -#define __put_user_nocheck_ret(data,addr,size,retval) ({ \ -register int __foo __asm__ ("l1"); \ -switch (size) { \ -case 1: __put_user_asm_ret(data,b,addr,retval,__foo); break; \ -case 2: __put_user_asm_ret(data,h,addr,retval,__foo); break; \ -case 4: __put_user_asm_ret(data,w,addr,retval,__foo); break; \ -case 8: __put_user_asm_ret(data,x,addr,retval,__foo); break; \ -default: if (__put_user_bad()) return retval; break; \ -} }) - #define __put_user_asm(x,size,addr,ret) \ __asm__ __volatile__( \ "/* Put user asm, inline. */\n" \ @@ -143,33 +133,6 @@ __asm__ __volatile__( \ : "=r" (ret) : "r" (x), "r" (__m(addr)), \ "i" (-EFAULT)) -#define __put_user_asm_ret(x,size,addr,ret,foo) \ -if (__builtin_constant_p(ret) && ret == -EFAULT) \ -__asm__ __volatile__( \ - "/* Put user asm ret, inline. */\n" \ -"1:\t" "st"#size "a %1, [%2] %%asi\n\n\t" \ - ".section __ex_table,\"a\"\n\t" \ - ".align 4\n\t" \ - ".word 1b, __ret_efault\n\n\t" \ - ".previous\n\n\t" \ - : "=r" (foo) : "r" (x), "r" (__m(addr))); \ -else \ -__asm__ __volatile__( \ - "/* Put user asm ret, inline. */\n" \ -"1:\t" "st"#size "a %1, [%2] %%asi\n\n\t" \ - ".section .fixup,#alloc,#execinstr\n\t" \ - ".align 4\n" \ -"3:\n\t" \ - "ret\n\t" \ - " restore %%g0, %3, %%o0\n\n\t" \ - ".previous\n\t" \ - ".section __ex_table,\"a\"\n\t" \ - ".align 4\n\t" \ - ".word 1b, 3b\n\n\t" \ - ".previous\n\n\t" \ - : "=r" (foo) : "r" (x), "r" (__m(addr)), \ - "i" (ret)) - extern int __put_user_bad(void); #define __get_user_nocheck(data,addr,size,type) ({ \ @@ -289,14 +252,7 @@ copy_in_user(void __user *to, void __user *from, unsigned long size) } #define __copy_in_user copy_in_user -extern unsigned long __must_check __bzero_noasi(void __user *, unsigned long); - -static inline unsigned long __must_check -__clear_user(void __user *addr, unsigned long size) -{ - - return __bzero_noasi(addr, size); -} +extern unsigned long __must_check __clear_user(void __user *, unsigned long); #define clear_user __clear_user diff --git a/include/asm-sparc64/vdev.h b/include/asm-sparc64/vdev.h new file mode 100644 index 000000000000..996e6be7b976 --- /dev/null +++ b/include/asm-sparc64/vdev.h @@ -0,0 +1,16 @@ +/* vdev.h: SUN4V virtual device interfaces and defines. + * + * Copyright (C) 2006 David S. Miller <davem@davemloft.net> + */ + +#ifndef _SPARC64_VDEV_H +#define _SPARC64_VDEV_H + +#include <linux/types.h> + +extern u32 sun4v_vdev_devhandle; +extern int sun4v_vdev_root; + +extern unsigned int sun4v_vdev_device_interrupt(unsigned int); + +#endif /* !(_SPARC64_VDEV_H) */ diff --git a/include/asm-sparc64/xor.h b/include/asm-sparc64/xor.h index 8b3a7e4b6062..8ce3f1813e28 100644 --- a/include/asm-sparc64/xor.h +++ b/include/asm-sparc64/xor.h @@ -2,9 +2,11 @@ * include/asm-sparc64/xor.h * * High speed xor_block operation for RAID4/5 utilizing the - * UltraSparc Visual Instruction Set. + * UltraSparc Visual Instruction Set and Niagara block-init + * twin-load instructions. * * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz) + * Copyright (C) 2006 David S. Miller <davem@davemloft.net> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,8 +18,7 @@ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <asm/pstate.h> -#include <asm/asi.h> +#include <asm/spitfire.h> extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *); extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *, @@ -37,4 +38,29 @@ static struct xor_block_template xor_block_VIS = { .do_5 = xor_vis_5, }; -#define XOR_TRY_TEMPLATES xor_speed(&xor_block_VIS) +extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *); +extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *, + unsigned long *); +extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *); +extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *, + unsigned long *, unsigned long *, unsigned long *); + +static struct xor_block_template xor_block_niagara = { + .name = "Niagara", + .do_2 = xor_niagara_2, + .do_3 = xor_niagara_3, + .do_4 = xor_niagara_4, + .do_5 = xor_niagara_5, +}; + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_VIS); \ + xor_speed(&xor_block_niagara); \ + } while (0) + +/* For VIS for everything except Niagara. */ +#define XOR_SELECT_TEMPLATE(FASTEST) \ + (tlb_type == hypervisor ? &xor_block_niagara : &xor_block_VIS) diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 4041122dabfc..57abcea1cb5d 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -127,6 +127,9 @@ /* Hilscher netx */ #define PORT_NETX 71 +/* SUN4V Hypervisor Console */ +#define PORT_SUNHV 72 + #ifdef __KERNEL__ #include <linux/config.h> |
