diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 236 |
1 files changed, 141 insertions, 95 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 26b5b692c22b..7b0730aeb892 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -188,6 +188,8 @@ struct ieee80211_channel { * when used with 802.11g (on the 2.4 GHz band); filled by the * core code when registering the wiphy. * @IEEE80211_RATE_ERP_G: This is an ERP rate in 802.11g mode. + * @IEEE80211_RATE_SUPPORTS_5MHZ: Rate can be used in 5 MHz mode + * @IEEE80211_RATE_SUPPORTS_10MHZ: Rate can be used in 10 MHz mode */ enum ieee80211_rate_flags { IEEE80211_RATE_SHORT_PREAMBLE = 1<<0, @@ -195,6 +197,8 @@ enum ieee80211_rate_flags { IEEE80211_RATE_MANDATORY_B = 1<<2, IEEE80211_RATE_MANDATORY_G = 1<<3, IEEE80211_RATE_ERP_G = 1<<4, + IEEE80211_RATE_SUPPORTS_5MHZ = 1<<5, + IEEE80211_RATE_SUPPORTS_10MHZ = 1<<6, }; /** @@ -433,6 +437,30 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, u32 prohibited_flags); /** + * ieee80211_chandef_rate_flags - returns rate flags for a channel + * + * In some channel types, not all rates may be used - for example CCK + * rates may not be used in 5/10 MHz channels. + * + * @chandef: channel definition for the channel + * + * Returns: rate flags which apply for this channel + */ +static inline enum ieee80211_rate_flags +ieee80211_chandef_rate_flags(struct cfg80211_chan_def *chandef) +{ + switch (chandef->width) { + case NL80211_CHAN_WIDTH_5: + return IEEE80211_RATE_SUPPORTS_5MHZ; + case NL80211_CHAN_WIDTH_10: + return IEEE80211_RATE_SUPPORTS_10MHZ; + default: + break; + } + return 0; +} + +/** * enum survey_info_flags - survey information flags * * @SURVEY_INFO_NOISE_DBM: noise (in dBm) was filled in @@ -753,6 +781,8 @@ int cfg80211_check_station_change(struct wiphy *wiphy, * @STATION_INFO_LOCAL_PM: @local_pm filled * @STATION_INFO_PEER_PM: @peer_pm filled * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled + * @STATION_INFO_CHAIN_SIGNAL: @chain_signal filled + * @STATION_INFO_CHAIN_SIGNAL_AVG: @chain_signal_avg filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -781,6 +811,8 @@ enum station_info_flags { STATION_INFO_NONPEER_PM = 1<<23, STATION_INFO_RX_BYTES64 = 1<<24, STATION_INFO_TX_BYTES64 = 1<<25, + STATION_INFO_CHAIN_SIGNAL = 1<<26, + STATION_INFO_CHAIN_SIGNAL_AVG = 1<<27, }; /** @@ -857,6 +889,8 @@ struct sta_bss_parameters { u16 beacon_interval; }; +#define IEEE80211_MAX_CHAINS 4 + /** * struct station_info - station information * @@ -874,6 +908,9 @@ struct sta_bss_parameters { * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @signal_avg: Average signal strength, type depends on the wiphy's signal_type. * For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @chains: bitmask for filled values in @chain_signal, @chain_signal_avg + * @chain_signal: per-chain signal strength of last received packet in dBm + * @chain_signal_avg: per-chain signal strength average in dBm * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station @@ -909,6 +946,11 @@ struct station_info { u8 plink_state; s8 signal; s8 signal_avg; + + u8 chains; + s8 chain_signal[IEEE80211_MAX_CHAINS]; + s8 chain_signal_avg[IEEE80211_MAX_CHAINS]; + struct rate_info txrate; struct rate_info rxrate; u32 rx_packets; @@ -947,6 +989,7 @@ struct station_info { * @MONITOR_FLAG_CONTROL: pass control frames * @MONITOR_FLAG_OTHER_BSS: disable BSSID filtering * @MONITOR_FLAG_COOK_FRAMES: report frames after processing + * @MONITOR_FLAG_ACTIVE: active monitor, ACKs frames on its MAC address */ enum monitor_flags { MONITOR_FLAG_FCSFAIL = 1<<NL80211_MNTR_FLAG_FCSFAIL, @@ -954,6 +997,7 @@ enum monitor_flags { MONITOR_FLAG_CONTROL = 1<<NL80211_MNTR_FLAG_CONTROL, MONITOR_FLAG_OTHER_BSS = 1<<NL80211_MNTR_FLAG_OTHER_BSS, MONITOR_FLAG_COOK_FRAMES = 1<<NL80211_MNTR_FLAG_COOK_FRAMES, + MONITOR_FLAG_ACTIVE = 1<<NL80211_MNTR_FLAG_ACTIVE, }; /** @@ -1108,6 +1152,9 @@ struct bss_parameters { * setting for new peer links. * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake * after transmitting its beacon. + * @plink_timeout: If no tx activity is seen from a STA we've established + * peering with for longer than this time (in seconds), then remove it + * from the STA's list of peers. Default is 30 minutes. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1137,6 +1184,7 @@ struct mesh_config { u16 dot11MeshHWMPconfirmationInterval; enum nl80211_mesh_power_mode power_mode; u16 dot11MeshAwakeWindowDuration; + u32 plink_timeout; }; /** @@ -1147,6 +1195,7 @@ struct mesh_config { * @sync_method: which synchronization method to use * @path_sel_proto: which path selection protocol to use * @path_metric: which metric to use + * @auth_id: which authentication method this mesh is using * @ie: vendor information elements (optional) * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication @@ -1155,6 +1204,7 @@ struct mesh_config { * @dtim_period: DTIM period to use * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] + * @basic_rates: basic rates to use when creating the mesh * * These parameters are fixed when the mesh is created. */ @@ -1165,6 +1215,7 @@ struct mesh_setup { u8 sync_method; u8 path_sel_proto; u8 path_metric; + u8 auth_id; const u8 *ie; u8 ie_len; bool is_authenticated; @@ -1173,6 +1224,7 @@ struct mesh_setup { u8 dtim_period; u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; + u32 basic_rates; }; /** @@ -1241,6 +1293,7 @@ struct cfg80211_ssid { * @scan_start: time (in jiffies) when the scan started * @wdev: the wireless device to scan for * @aborted: (internal) scan request was notified as aborted + * @notified: (internal) scan request was notified as done or aborted * @no_cck: used to send probe requests at non CCK rate in 2GHz band */ struct cfg80211_scan_request { @@ -1258,7 +1311,7 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; unsigned long scan_start; - bool aborted; + bool aborted, notified; bool no_cck; /* keep last */ @@ -1406,7 +1459,8 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * This structure provides information needed to complete IEEE 802.11 * authentication. * - * @bss: The BSS to authenticate with. + * @bss: The BSS to authenticate with, the callee must obtain a reference + * to it if it needs to keep it. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets @@ -1444,11 +1498,10 @@ enum cfg80211_assoc_req_flags { * * This structure provides information needed to complete IEEE 802.11 * (re)association. - * @bss: The BSS to associate with. If the call is successful the driver - * is given a reference that it must release, normally via a call to - * cfg80211_send_rx_assoc(), or, if association timed out, with a - * call to cfg80211_put_bss() (in addition to calling - * cfg80211_send_assoc_timeout()) + * @bss: The BSS to associate with. If the call is successful the driver is + * given a reference that it must give back to cfg80211_send_rx_assoc() + * or to cfg80211_assoc_timeout(). To ensure proper refcounting, new + * association requests while already associating must be rejected. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association @@ -1850,7 +1903,9 @@ struct cfg80211_update_ft_ies_params { * @get_mpath: get a mesh path for the given parameters * @dump_mpath: dump mesh path callback -- resume dump at index @idx * @join_mesh: join the mesh network with the specified parameters + * (invoked with the wireless_dev mutex held) * @leave_mesh: leave the current mesh network + * (invoked with the wireless_dev mutex held) * * @get_mesh_config: Get the current mesh configuration * @@ -1877,20 +1932,28 @@ struct cfg80211_update_ft_ies_params { * the scan/scan_done bracket too. * * @auth: Request to authenticate with the specified peer + * (invoked with the wireless_dev mutex held) * @assoc: Request to (re)associate with the specified peer + * (invoked with the wireless_dev mutex held) * @deauth: Request to deauthenticate from the specified peer + * (invoked with the wireless_dev mutex held) * @disassoc: Request to disassociate from the specified peer + * (invoked with the wireless_dev mutex held) * * @connect: Connect to the ESS with the specified parameters. When connected, * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. * If the connection fails for some reason, call cfg80211_connect_result() * with the status from the AP. + * (invoked with the wireless_dev mutex held) * @disconnect: Disconnect from the BSS/ESS. + * (invoked with the wireless_dev mutex held) * * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call * cfg80211_ibss_joined(), also call that function when changing BSSID due * to a merge. + * (invoked with the wireless_dev mutex held) * @leave_ibss: Leave the IBSS. + * (invoked with the wireless_dev mutex held) * * @set_mcast_rate: Set the specified multicast rate (only if vif is in ADHOC or * MESH mode) @@ -2307,6 +2370,7 @@ struct cfg80211_ops { * responds to probe-requests in hardware. * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. + * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -2330,6 +2394,7 @@ enum wiphy_flags { WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD = BIT(19), WIPHY_FLAG_OFFCHAN_TX = BIT(20), WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), + WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), }; /** @@ -2556,6 +2621,9 @@ struct wiphy_wowlan_support { * may request, if implemented. * * @wowlan: WoWLAN support information + * @wowlan_config: current WoWLAN configuration; this should usually not be + * used since access to it is necessarily racy, use the parameter passed + * to the suspend() operation instead. * * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features. * @ht_capa_mod_mask: Specify what ht_cap values can be over-ridden. @@ -2622,7 +2690,8 @@ struct wiphy { u32 hw_version; #ifdef CONFIG_PM - struct wiphy_wowlan_support wowlan; + const struct wiphy_wowlan_support *wowlan; + struct cfg80211_wowlan *wowlan_config; #endif u16 max_remain_on_channel_duration; @@ -2820,7 +2889,7 @@ struct cfg80211_cached_keys; * @current_bss: (private) Used by the internal configuration code * @channel: (private) Used by the internal configuration code to track * the user-set AP, monitor and WDS channel - * @preset_chan: (private) Used by the internal configuration code to + * @preset_chandef: (private) Used by the internal configuration code to * track the channel to be used for AP later * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code @@ -2834,14 +2903,23 @@ struct cfg80211_cached_keys; * by cfg80211 on change_interface * @mgmt_registrations: list of registrations for management frames * @mgmt_registrations_lock: lock for the list - * @mtx: mutex used to lock data in this struct - * @cleanup_work: work struct used for cleanup that can't be done directly + * @mtx: mutex used to lock data in this struct, may be used by drivers + * and some API functions require it held * @beacon_interval: beacon interval used on this device for transmitting * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started * @cac_started: true if DFS channel availability check has been started * @cac_start_time: timestamp (jiffies) when the dfs state was entered. + * @ps: powersave mode is enabled + * @ps_timeout: dynamic powersave timeout + * @ap_unexpected_nlportid: (private) netlink port ID of application + * registered for unexpected class 3 frames (AP mode) + * @conn: (private) cfg80211 software SME connection state machine data + * @connect_keys: (private) keys to set after connection is established + * @ibss_fixed: (private) IBSS is using fixed BSSID + * @event_list: (private) list for internal event processing + * @event_lock: (private) lock for event list */ struct wireless_dev { struct wiphy *wiphy; @@ -2858,8 +2936,6 @@ struct wireless_dev { struct mutex mtx; - struct work_struct cleanup_work; - bool use_4addr, p2p_started; u8 address[ETH_ALEN] __aligned(sizeof(u16)); @@ -2867,11 +2943,6 @@ struct wireless_dev { /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len, mesh_id_len, mesh_id_up_len; - enum { - CFG80211_SME_IDLE, - CFG80211_SME_CONNECTING, - CFG80211_SME_CONNECTED, - } sme_state; struct cfg80211_conn *conn; struct cfg80211_cached_keys *connect_keys; @@ -2989,6 +3060,15 @@ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, u32 basic_rates, int bitrate); +/** + * ieee80211_mandatory_rates - get mandatory rates for a given band + * @sband: the band to look for rates in + * + * This function returns a bitmap of the mandatory rates for the given + * band, bits are set according to the rate position in the bitrates array. + */ +u32 ieee80211_mandatory_rates(struct ieee80211_supported_band *sband); + /* * Radiotap parsing functions -- for controlled injection support * @@ -3392,122 +3472,87 @@ void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** - * cfg80211_send_rx_auth - notification of processed authentication + * cfg80211_rx_mlme_mgmt - notification of processed MLME management frame * @dev: network device * @buf: authentication frame (header + body) * @len: length of the frame data * - * This function is called whenever an authentication has been processed in - * station mode. The driver is required to call either this function or - * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() - * call. This function may sleep. + * This function is called whenever an authentication, disassociation or + * deauthentication frame has been received and processed in station mode. + * After being asked to authenticate via cfg80211_ops::auth() the driver must + * call either this function or cfg80211_auth_timeout(). + * After being asked to associate via cfg80211_ops::assoc() the driver must + * call either this function or cfg80211_auth_timeout(). + * While connected, the driver must calls this for received and processed + * disassociation and deauthentication frames. If the frame couldn't be used + * because it was unprotected, the driver must call the function + * cfg80211_rx_unprot_mlme_mgmt() instead. + * + * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_rx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_auth_timeout - notification of timed out authentication + * cfg80211_auth_timeout - notification of timed out authentication * @dev: network device * @addr: The MAC address of the device with which the authentication timed out * - * This function may sleep. + * This function may sleep. The caller must hold the corresponding wdev's + * mutex. */ -void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_auth_timeout(struct net_device *dev, const u8 *addr); /** - * cfg80211_send_rx_assoc - notification of processed association + * cfg80211_rx_assoc_resp - notification of processed association response * @dev: network device - * @bss: the BSS struct association was requested for, the struct reference - * is owned by cfg80211 after this call - * @buf: (re)association response frame (header + body) + * @bss: the BSS that association was requested with, ownership of the pointer + * moves to cfg80211 in this call + * @buf: authentication frame (header + body) * @len: length of the frame data * - * This function is called whenever a (re)association response has been - * processed in station mode. The driver is required to call either this - * function or cfg80211_send_assoc_timeout() to indicate the result of - * cfg80211_ops::assoc() call. This function may sleep. + * After being asked to associate via cfg80211_ops::assoc() the driver must + * call either this function or cfg80211_auth_timeout(). + * + * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, +void cfg80211_rx_assoc_resp(struct net_device *dev, + struct cfg80211_bss *bss, const u8 *buf, size_t len); /** - * cfg80211_send_assoc_timeout - notification of timed out association + * cfg80211_assoc_timeout - notification of timed out association * @dev: network device - * @addr: The MAC address of the device with which the association timed out + * @bss: The BSS entry with which association timed out. * - * This function may sleep. + * This function may sleep. The caller must hold the corresponding wdev's mutex. */ -void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); +void cfg80211_assoc_timeout(struct net_device *dev, struct cfg80211_bss *bss); /** - * cfg80211_send_deauth - notification of processed deauthentication + * cfg80211_tx_mlme_mgmt - notification of transmitted deauth/disassoc frame * @dev: network device - * @buf: deauthentication frame (header + body) + * @buf: 802.11 frame (header + body) * @len: length of the frame data * * This function is called whenever deauthentication has been processed in * station mode. This includes both received deauthentication frames and - * locally generated ones. This function may sleep. - */ -void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); - -/** - * __cfg80211_send_deauth - notification of processed deauthentication - * @dev: network device - * @buf: deauthentication frame (header + body) - * @len: length of the frame data - * - * Like cfg80211_send_deauth(), but doesn't take the wdev lock. - */ -void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); - -/** - * cfg80211_send_disassoc - notification of processed disassociation - * @dev: network device - * @buf: disassociation response frame (header + body) - * @len: length of the frame data - * - * This function is called whenever disassociation has been processed in - * station mode. This includes both received disassociation frames and locally - * generated ones. This function may sleep. - */ -void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); - -/** - * __cfg80211_send_disassoc - notification of processed disassociation - * @dev: network device - * @buf: disassociation response frame (header + body) - * @len: length of the frame data - * - * Like cfg80211_send_disassoc(), but doesn't take the wdev lock. + * locally generated ones. This function may sleep. The caller must hold the + * corresponding wdev's mutex. */ -void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_tx_mlme_mgmt(struct net_device *dev, const u8 *buf, size_t len); /** - * cfg80211_send_unprot_deauth - notification of unprotected deauthentication + * cfg80211_rx_unprot_mlme_mgmt - notification of unprotected mlme mgmt frame * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data * - * This function is called whenever a received Deauthentication frame has been - * dropped in station mode because of MFP being used but the Deauthentication + * This function is called whenever a received deauthentication or dissassoc + * frame has been dropped in station mode because of MFP being used but the * frame was not protected. This function may sleep. */ -void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf, - size_t len); - -/** - * cfg80211_send_unprot_disassoc - notification of unprotected disassociation - * @dev: network device - * @buf: disassociation frame (header + body) - * @len: length of the frame data - * - * This function is called whenever a received Disassociation frame has been - * dropped in station mode because of MFP being used but the Disassociation - * frame was not protected. This function may sleep. - */ -void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf, - size_t len); +void cfg80211_rx_unprot_mlme_mgmt(struct net_device *dev, + const u8 *buf, size_t len); /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) @@ -4153,6 +4198,7 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, * cfg80211_crit_proto_stopped() - indicate critical protocol stopped by driver. * * @wdev: the wireless device for which critical protocol is stopped. + * @gfp: allocation flags * * This function can be called by the driver to indicate it has reverted * operation back to normal. One reason could be that the duration given |
