diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/via-core.h | 219 | ||||
| -rw-r--r-- | include/linux/via-gpio.h | 14 | ||||
| -rw-r--r-- | include/linux/via_i2c.h | 42 |
3 files changed, 275 insertions, 0 deletions
diff --git a/include/linux/via-core.h b/include/linux/via-core.h new file mode 100644 index 000000000000..7ffb521e1a7a --- /dev/null +++ b/include/linux/via-core.h @@ -0,0 +1,219 @@ +/* + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + * Copyright 2009-2010 Jonathan Corbet <corbet@lwn.net> + * Copyright 2010 Florian Tobias Schandinat <FlorianSchandinat@gmx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; + * either version 2, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even + * the implied warranty of MERCHANTABILITY or FITNESS FOR + * A PARTICULAR PURPOSE.See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __VIA_CORE_H__ +#define __VIA_CORE_H__ +#include <linux/types.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/pci.h> + +/* + * A description of each known serial I2C/GPIO port. + */ +enum via_port_type { + VIA_PORT_NONE = 0, + VIA_PORT_I2C, + VIA_PORT_GPIO, +}; + +enum via_port_mode { + VIA_MODE_OFF = 0, + VIA_MODE_I2C, /* Used as I2C port */ + VIA_MODE_GPIO, /* Two GPIO ports */ +}; + +enum viafb_i2c_adap { + VIA_PORT_26 = 0, + VIA_PORT_31, + VIA_PORT_25, + VIA_PORT_2C, + VIA_PORT_3D, +}; +#define VIAFB_NUM_PORTS 5 + +struct via_port_cfg { + enum via_port_type type; + enum via_port_mode mode; + u16 io_port; + u8 ioport_index; +}; + +/* + * This is the global viafb "device" containing stuff needed by + * all subdevs. + */ +struct viafb_dev { + struct pci_dev *pdev; + int chip_type; + struct via_port_cfg *port_cfg; + /* + * Spinlock for access to device registers. Not yet + * globally used. + */ + spinlock_t reg_lock; + /* + * The framebuffer MMIO region. Little, if anything, touches + * this memory directly, and certainly nothing outside of the + * framebuffer device itself. We *do* have to be able to allocate + * chunks of this memory for other devices, though. + */ + unsigned long fbmem_start; + long fbmem_len; + void __iomem *fbmem; +#if defined(CONFIG_FB_VIA_CAMERA) || defined(CONFIG_FB_VIA_CAMERA_MODULE) + long camera_fbmem_offset; + long camera_fbmem_size; +#endif + /* + * The MMIO region for device registers. + */ + unsigned long engine_start; + unsigned long engine_len; + void __iomem *engine_mmio; + +}; + +/* + * Interrupt management. + */ + +void viafb_irq_enable(u32 mask); +void viafb_irq_disable(u32 mask); + +/* + * The global interrupt control register and its bits. + */ +#define VDE_INTERRUPT 0x200 /* Video interrupt flags/masks */ +#define VDE_I_DVISENSE 0x00000001 /* DVI sense int status */ +#define VDE_I_VBLANK 0x00000002 /* Vertical blank status */ +#define VDE_I_MCCFI 0x00000004 /* MCE compl. frame int status */ +#define VDE_I_VSYNC 0x00000008 /* VGA VSYNC int status */ +#define VDE_I_DMA0DDONE 0x00000010 /* DMA 0 descr done */ +#define VDE_I_DMA0TDONE 0x00000020 /* DMA 0 transfer done */ +#define VDE_I_DMA1DDONE 0x00000040 /* DMA 1 descr done */ +#define VDE_I_DMA1TDONE 0x00000080 /* DMA 1 transfer done */ +#define VDE_I_C1AV 0x00000100 /* Cap Eng 1 act vid end */ +#define VDE_I_HQV0 0x00000200 /* First HQV engine */ +#define VDE_I_HQV1 0x00000400 /* Second HQV engine */ +#define VDE_I_HQV1EN 0x00000800 /* Second HQV engine enable */ +#define VDE_I_C0AV 0x00001000 /* Cap Eng 0 act vid end */ +#define VDE_I_C0VBI 0x00002000 /* Cap Eng 0 VBI end */ +#define VDE_I_C1VBI 0x00004000 /* Cap Eng 1 VBI end */ +#define VDE_I_VSYNC2 0x00008000 /* Sec. Disp. VSYNC */ +#define VDE_I_DVISNSEN 0x00010000 /* DVI sense enable */ +#define VDE_I_VSYNC2EN 0x00020000 /* Sec Disp VSYNC enable */ +#define VDE_I_MCCFIEN 0x00040000 /* MC comp frame int mask enable */ +#define VDE_I_VSYNCEN 0x00080000 /* VSYNC enable */ +#define VDE_I_DMA0DDEN 0x00100000 /* DMA 0 descr done enable */ +#define VDE_I_DMA0TDEN 0x00200000 /* DMA 0 trans done enable */ +#define VDE_I_DMA1DDEN 0x00400000 /* DMA 1 descr done enable */ +#define VDE_I_DMA1TDEN 0x00800000 /* DMA 1 trans done enable */ +#define VDE_I_C1AVEN 0x01000000 /* cap 1 act vid end enable */ +#define VDE_I_HQV0EN 0x02000000 /* First hqv engine enable */ +#define VDE_I_C1VBIEN 0x04000000 /* Cap 1 VBI end enable */ +#define VDE_I_LVDSSI 0x08000000 /* LVDS sense interrupt */ +#define VDE_I_C0AVEN 0x10000000 /* Cap 0 act vid end enable */ +#define VDE_I_C0VBIEN 0x20000000 /* Cap 0 VBI end enable */ +#define VDE_I_LVDSSIEN 0x40000000 /* LVDS Sense enable */ +#define VDE_I_ENABLE 0x80000000 /* Global interrupt enable */ + +/* + * DMA management. + */ +int viafb_request_dma(void); +void viafb_release_dma(void); +/* void viafb_dma_copy_out(unsigned int offset, dma_addr_t paddr, int len); */ +int viafb_dma_copy_out_sg(unsigned int offset, struct scatterlist *sg, int nsg); + +/* + * DMA Controller registers. + */ +#define VDMA_MR0 0xe00 /* Mod reg 0 */ +#define VDMA_MR_CHAIN 0x01 /* Chaining mode */ +#define VDMA_MR_TDIE 0x02 /* Transfer done int enable */ +#define VDMA_CSR0 0xe04 /* Control/status */ +#define VDMA_C_ENABLE 0x01 /* DMA Enable */ +#define VDMA_C_START 0x02 /* Start a transfer */ +#define VDMA_C_ABORT 0x04 /* Abort a transfer */ +#define VDMA_C_DONE 0x08 /* Transfer is done */ +#define VDMA_MARL0 0xe20 /* Mem addr low */ +#define VDMA_MARH0 0xe24 /* Mem addr high */ +#define VDMA_DAR0 0xe28 /* Device address */ +#define VDMA_DQWCR0 0xe2c /* Count (16-byte) */ +#define VDMA_TMR0 0xe30 /* Tile mode reg */ +#define VDMA_DPRL0 0xe34 /* Not sure */ +#define VDMA_DPR_IN 0x08 /* Inbound transfer to FB */ +#define VDMA_DPRH0 0xe38 +#define VDMA_PMR0 (0xe00 + 0x134) /* Pitch mode */ + +/* + * Useful stuff that probably belongs somewhere global. + */ +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +/* + * Indexed port operations. Note that these are all multi-op + * functions; every invocation will be racy if you're not holding + * reg_lock. + */ + +#define VIAStatus 0x3DA /* Non-indexed port */ +#define VIACR 0x3D4 +#define VIASR 0x3C4 +#define VIAGR 0x3CE +#define VIAAR 0x3C0 + +static inline u8 via_read_reg(u16 port, u8 index) +{ + outb(index, port); + return inb(port + 1); +} + +static inline void via_write_reg(u16 port, u8 index, u8 data) +{ + outb(index, port); + outb(data, port + 1); +} + +static inline void via_write_reg_mask(u16 port, u8 index, u8 data, u8 mask) +{ + u8 old; + + outb(index, port); + old = inb(port + 1); + outb((data & mask) | (old & ~mask), port + 1); +} + +#define VIA_MISC_REG_READ 0x03CC +#define VIA_MISC_REG_WRITE 0x03C2 + +static inline void via_write_misc_reg_mask(u8 data, u8 mask) +{ + u8 old = inb(VIA_MISC_REG_READ); + outb((data & mask) | (old & ~mask), VIA_MISC_REG_WRITE); +} + + +#endif /* __VIA_CORE_H__ */ diff --git a/include/linux/via-gpio.h b/include/linux/via-gpio.h new file mode 100644 index 000000000000..8281aea3dd6d --- /dev/null +++ b/include/linux/via-gpio.h @@ -0,0 +1,14 @@ +/* + * Support for viafb GPIO ports. + * + * Copyright 2009 Jonathan Corbet <corbet@lwn.net> + * Distributable under version 2 of the GNU General Public License. + */ + +#ifndef __VIA_GPIO_H__ +#define __VIA_GPIO_H__ + +extern int viafb_gpio_lookup(const char *name); +extern int viafb_gpio_init(void); +extern void viafb_gpio_exit(void); +#endif diff --git a/include/linux/via_i2c.h b/include/linux/via_i2c.h new file mode 100644 index 000000000000..44532e468c05 --- /dev/null +++ b/include/linux/via_i2c.h @@ -0,0 +1,42 @@ +/* + * Copyright 1998-2009 VIA Technologies, Inc. All Rights Reserved. + * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved. + + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; + * either version 2, or (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even + * the implied warranty of MERCHANTABILITY or FITNESS FOR + * A PARTICULAR PURPOSE.See the GNU General Public License + * for more details. + + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __VIA_I2C_H__ +#define __VIA_I2C_H__ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> + +struct via_i2c_stuff { + u16 i2c_port; /* GPIO or I2C port */ + u16 is_active; /* Being used as I2C? */ + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo; +}; + + +int viafb_i2c_readbyte(u8 adap, u8 slave_addr, u8 index, u8 *pdata); +int viafb_i2c_writebyte(u8 adap, u8 slave_addr, u8 index, u8 data); +int viafb_i2c_readbytes(u8 adap, u8 slave_addr, u8 index, u8 *buff, int buff_len); +struct i2c_adapter *viafb_find_i2c_adapter(enum viafb_i2c_adap which); + +extern int viafb_i2c_init(void); +extern void viafb_i2c_exit(void); +#endif /* __VIA_I2C_H__ */ |
