diff options
Diffstat (limited to 'include/linux')
207 files changed, 5629 insertions, 1255 deletions
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h index c5d6095b46f8..975009e1cbe6 100644 --- a/include/linux/alarmtimer.h +++ b/include/linux/alarmtimer.h @@ -13,6 +13,16 @@ enum alarmtimer_type { ALARM_NUMTYPE, }; +enum alarmtimer_restart { + ALARMTIMER_NORESTART, + ALARMTIMER_RESTART, +}; + + +#define ALARMTIMER_STATE_INACTIVE 0x00 +#define ALARMTIMER_STATE_ENQUEUED 0x01 +#define ALARMTIMER_STATE_CALLBACK 0x02 + /** * struct alarm - Alarm timer structure * @node: timerqueue node for adding to the event list this value @@ -25,16 +35,45 @@ enum alarmtimer_type { */ struct alarm { struct timerqueue_node node; - ktime_t period; - void (*function)(struct alarm *); + enum alarmtimer_restart (*function)(struct alarm *, ktime_t now); enum alarmtimer_type type; - bool enabled; + int state; void *data; }; void alarm_init(struct alarm *alarm, enum alarmtimer_type type, - void (*function)(struct alarm *)); -void alarm_start(struct alarm *alarm, ktime_t start, ktime_t period); -void alarm_cancel(struct alarm *alarm); + enum alarmtimer_restart (*function)(struct alarm *, ktime_t)); +void alarm_start(struct alarm *alarm, ktime_t start); +int alarm_try_to_cancel(struct alarm *alarm); +int alarm_cancel(struct alarm *alarm); + +u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval); + +/* + * A alarmtimer is active, when it is enqueued into timerqueue or the + * callback function is running. + */ +static inline int alarmtimer_active(const struct alarm *timer) +{ + return timer->state != ALARMTIMER_STATE_INACTIVE; +} + +/* + * Helper function to check, whether the timer is on one of the queues + */ +static inline int alarmtimer_is_queued(struct alarm *timer) +{ + return timer->state & ALARMTIMER_STATE_ENQUEUED; +} + +/* + * Helper function to check, whether the timer is running the callback + * function + */ +static inline int alarmtimer_callback_running(struct alarm *timer) +{ + return timer->state & ALARMTIMER_STATE_CALLBACK; +} + #endif diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h index 5ddd9ad4b19c..2412af944f1f 100644 --- a/include/linux/amba/pl061.h +++ b/include/linux/amba/pl061.h @@ -7,8 +7,7 @@ struct pl061_platform_data { unsigned gpio_base; /* number of the first IRQ. - * If the IRQ functionality in not desired this must be set to - * (unsigned) -1. + * If the IRQ functionality in not desired this must be set to NO_IRQ. */ unsigned irq_base; diff --git a/include/linux/atalk.h b/include/linux/atalk.h index d34c187432ed..f57c36881c48 100644 --- a/include/linux/atalk.h +++ b/include/linux/atalk.h @@ -3,6 +3,7 @@ #include <linux/types.h> #include <asm/byteorder.h> +#include <linux/socket.h> /* * AppleTalk networking structures @@ -28,7 +29,7 @@ struct atalk_addr { }; struct sockaddr_at { - sa_family_t sat_family; + __kernel_sa_family_t sat_family; __u8 sat_port; struct atalk_addr sat_addr; char sat_zero[8]; diff --git a/include/linux/atmel-mci.h b/include/linux/atmel-mci.h index 3e09b345f4d6..4c7a4b2104bf 100644 --- a/include/linux/atmel-mci.h +++ b/include/linux/atmel-mci.h @@ -1,7 +1,7 @@ #ifndef __LINUX_ATMEL_MCI_H #define __LINUX_ATMEL_MCI_H -#define ATMEL_MCI_MAX_NR_SLOTS 2 +#define ATMCI_MAX_NR_SLOTS 2 /** * struct mci_slot_pdata - board-specific per-slot configuration @@ -33,7 +33,7 @@ struct mci_slot_pdata { */ struct mci_platform_data { struct mci_dma_data *dma_slave; - struct mci_slot_pdata slot[ATMEL_MCI_MAX_NR_SLOTS]; + struct mci_slot_pdata slot[ATMCI_MAX_NR_SLOTS]; }; #endif /* __LINUX_ATMEL_MCI_H */ diff --git a/include/linux/atmel_pdc.h b/include/linux/atmel_pdc.h index 5058a31d2ce8..63499ce806ea 100644 --- a/include/linux/atmel_pdc.h +++ b/include/linux/atmel_pdc.h @@ -33,4 +33,6 @@ #define ATMEL_PDC_PTSR 0x124 /* Transfer Status Register */ +#define ATMEL_PDC_SCND_BUF_OFF 0x10 /* Offset between first and second buffer registers */ + #endif diff --git a/include/linux/ax25.h b/include/linux/ax25.h index 56c11f0dbd80..74c89a41732d 100644 --- a/include/linux/ax25.h +++ b/include/linux/ax25.h @@ -47,7 +47,7 @@ typedef struct { } ax25_address; struct sockaddr_ax25 { - sa_family_t sax25_family; + __kernel_sa_family_t sax25_family; ax25_address sax25_call; int sax25_ndigis; /* Digipeater ax25_address sets follow */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8c96654bef16..5dbd7055cb86 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include <linux/bcma/bcma_driver_chipcommon.h> #include <linux/bcma/bcma_driver_pci.h> +#include <linux/bcma/bcma_driver_mips.h> #include <linux/ssb/ssb.h> /* SPROM sharing */ #include "bcma_regs.h" @@ -14,9 +15,9 @@ struct bcma_device; struct bcma_bus; enum bcma_hosttype { - BCMA_HOSTTYPE_NONE, BCMA_HOSTTYPE_PCI, BCMA_HOSTTYPE_SDIO, + BCMA_HOSTTYPE_SOC, }; struct bcma_chipinfo { @@ -130,6 +131,7 @@ struct bcma_device { struct device dev; struct device *dma_dev; + unsigned int irq; bool dev_registered; @@ -138,6 +140,9 @@ struct bcma_device { u32 addr; u32 wrap; + void __iomem *io_addr; + void __iomem *io_wrap; + void *drvdata; struct list_head list; }; @@ -190,9 +195,11 @@ struct bcma_bus { struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; + u8 init_done:1; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; + struct bcma_drv_mips drv_mips; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a0f684615ae5..1526d965ed06 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,6 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NFLASH 0x00000200 #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -178,6 +179,7 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -239,6 +241,64 @@ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 + +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f + +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -247,14 +307,37 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + struct bcma_drv_cc { struct bcma_device *core; u32 status; u32 capabilities; u32 capabilities_ext; + u8 setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ }; /* Register access */ @@ -275,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); @@ -293,4 +378,13 @@ u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); /* PMU support */ extern void bcma_pmu_init(struct bcma_drv_cc *cc); +extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, + u32 value); +extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, + u32 mask, u32 set); +extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); +extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set); + #endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h new file mode 100644 index 000000000000..c0043645cdcb --- /dev/null +++ b/include/linux/bcma/bcma_driver_mips.h @@ -0,0 +1,51 @@ +#ifndef LINUX_BCMA_DRIVER_MIPS_H_ +#define LINUX_BCMA_DRIVER_MIPS_H_ + +#define BCMA_MIPS_IPSFLAG 0x0F08 +/* which sbflags get routed to mips interrupt 1 */ +#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F +#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 +/* which sbflags get routed to mips interrupt 2 */ +#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 +#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 +/* which sbflags get routed to mips interrupt 3 */ +#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 +#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 +/* which sbflags get routed to mips interrupt 4 */ +#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 +#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 + +/* MIPS 74K core registers */ +#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 +#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 +#define BCMA_MIPS_MIPS74K_BIST 0x000C +#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 +#define BCMA_MIPS_MIPS74K_INTMASK(int) \ + ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) +#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C +#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 +#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 +#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 +#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + +#define BCMA_MIPS_OOBSELOUTA30 0x100 + +struct bcma_device; + +struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + unsigned int assigned_irqs; +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +#else +static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +#endif + +extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h new file mode 100644 index 000000000000..4203c5593b9f --- /dev/null +++ b/include/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ +#ifndef LINUX_BCMA_SOC_H_ +#define LINUX_BCMA_SOC_H_ + +#include <linux/bcma/bcma.h> + +struct bcma_soc { + struct bcma_bus bus; + struct bcma_device core_cc; + struct bcma_device core_mips; +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc); + +int bcma_bus_register(struct bcma_bus *bus); + +#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/include/linux/bma150.h b/include/linux/bma150.h new file mode 100644 index 000000000000..7911fda23bb4 --- /dev/null +++ b/include/linux/bma150.h @@ -0,0 +1,46 @@ +/* + * Copyright (c) 2011 Bosch Sensortec GmbH + * Copyright (c) 2011 Unixphere + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BMA150_H_ +#define _BMA150_H_ + +#define BMA150_DRIVER "bma150" + +struct bma150_cfg { + bool any_motion_int; /* Set to enable any-motion interrupt */ + bool hg_int; /* Set to enable high-G interrupt */ + bool lg_int; /* Set to enable low-G interrupt */ + unsigned char any_motion_dur; /* Any-motion duration */ + unsigned char any_motion_thres; /* Any-motion threshold */ + unsigned char hg_hyst; /* High-G hysterisis */ + unsigned char hg_dur; /* High-G duration */ + unsigned char hg_thres; /* High-G threshold */ + unsigned char lg_hyst; /* Low-G hysterisis */ + unsigned char lg_dur; /* Low-G duration */ + unsigned char lg_thres; /* Low-G threshold */ + unsigned char range; /* BMA0150_RANGE_xxx (in G) */ + unsigned char bandwidth; /* BMA0150_BW_xxx (in Hz) */ +}; + +struct bma150_platform_data { + struct bma150_cfg cfg; + int (*irq_gpio_cfg)(void); +}; + +#endif /* _BMA150_H_ */ diff --git a/include/linux/caif/caif_socket.h b/include/linux/caif/caif_socket.h index d9cb19b7cff7..3f3bac6af7bc 100644 --- a/include/linux/caif/caif_socket.h +++ b/include/linux/caif/caif_socket.h @@ -9,12 +9,7 @@ #define _LINUX_CAIF_SOCKET_H #include <linux/types.h> - -#ifdef __KERNEL__ #include <linux/socket.h> -#else -#include <sys/socket.h> -#endif /** * enum caif_link_selector - Physical Link Selection. @@ -144,7 +139,7 @@ enum caif_debug_service { * CAIF Channel. It defines the service to connect to on the modem. */ struct sockaddr_caif { - sa_family_t family; + __kernel_sa_family_t family; union { struct { __u8 type; /* type: enum caif_at_type */ diff --git a/include/linux/can.h b/include/linux/can.h index d18333302cbd..9a19bcb3eeaf 100644 --- a/include/linux/can.h +++ b/include/linux/can.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_H @@ -78,7 +76,7 @@ struct can_frame { * @can_addr: protocol specific address information */ struct sockaddr_can { - sa_family_t can_family; + __kernel_sa_family_t can_family; int can_ifindex; union { /* transport protocol class address information (e.g. ISOTP) */ diff --git a/include/linux/can/Kbuild b/include/linux/can/Kbuild index 8cb05aae661c..c62b7f1728f9 100644 --- a/include/linux/can/Kbuild +++ b/include/linux/can/Kbuild @@ -1,4 +1,5 @@ header-y += raw.h header-y += bcm.h +header-y += gw.h header-y += error.h header-y += netlink.h diff --git a/include/linux/can/bcm.h b/include/linux/can/bcm.h index 1432b278c52d..3ebe387fea4d 100644 --- a/include/linux/can/bcm.h +++ b/include/linux/can/bcm.h @@ -7,14 +7,13 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_BCM_H #define CAN_BCM_H #include <linux/types.h> +#include <linux/can.h> /** * struct bcm_msg_head - head of messages to/from the broadcast manager diff --git a/include/linux/can/core.h b/include/linux/can/core.h index 5ce6b5d62ecc..0ccc1cd28b95 100644 --- a/include/linux/can/core.h +++ b/include/linux/can/core.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_CORE_H diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index cc0bb4961669..a0969fcb72b9 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -8,7 +8,6 @@ * * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com> * - * Send feedback to <socketcan-users@lists.berlios.de> */ #ifndef CAN_DEV_H diff --git a/include/linux/can/error.h b/include/linux/can/error.h index 5958074302a4..63e855ea6b84 100644 --- a/include/linux/can/error.h +++ b/include/linux/can/error.h @@ -7,8 +7,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_ERROR_H diff --git a/include/linux/can/gw.h b/include/linux/can/gw.h new file mode 100644 index 000000000000..8e1db18c3cb6 --- /dev/null +++ b/include/linux/can/gw.h @@ -0,0 +1,162 @@ +/* + * linux/can/gw.h + * + * Definitions for CAN frame Gateway/Router/Bridge + * + * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de> + * Copyright (c) 2011 Volkswagen Group Electronic Research + * All rights reserved. + * + */ + +#ifndef CAN_GW_H +#define CAN_GW_H + +#include <linux/types.h> +#include <linux/can.h> + +struct rtcanmsg { + __u8 can_family; + __u8 gwtype; + __u16 flags; +}; + +/* CAN gateway types */ +enum { + CGW_TYPE_UNSPEC, + CGW_TYPE_CAN_CAN, /* CAN->CAN routing */ + __CGW_TYPE_MAX +}; + +#define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1) + +/* CAN rtnetlink attribute definitions */ +enum { + CGW_UNSPEC, + CGW_MOD_AND, /* CAN frame modification binary AND */ + CGW_MOD_OR, /* CAN frame modification binary OR */ + CGW_MOD_XOR, /* CAN frame modification binary XOR */ + CGW_MOD_SET, /* CAN frame modification set alternate values */ + CGW_CS_XOR, /* set data[] XOR checksum into data[index] */ + CGW_CS_CRC8, /* set data[] CRC8 checksum into data[index] */ + CGW_HANDLED, /* number of handled CAN frames */ + CGW_DROPPED, /* number of dropped CAN frames */ + CGW_SRC_IF, /* ifindex of source network interface */ + CGW_DST_IF, /* ifindex of destination network interface */ + CGW_FILTER, /* specify struct can_filter on source CAN device */ + __CGW_MAX +}; + +#define CGW_MAX (__CGW_MAX - 1) + +#define CGW_FLAGS_CAN_ECHO 0x01 +#define CGW_FLAGS_CAN_SRC_TSTAMP 0x02 + +#define CGW_MOD_FUNCS 4 /* AND OR XOR SET */ + +/* CAN frame elements that are affected by curr. 3 CAN frame modifications */ +#define CGW_MOD_ID 0x01 +#define CGW_MOD_DLC 0x02 +#define CGW_MOD_DATA 0x04 + +#define CGW_FRAME_MODS 3 /* ID DLC DATA */ + +#define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS) + +struct cgw_frame_mod { + struct can_frame cf; + __u8 modtype; +} __attribute__((packed)); + +#define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod) + +struct cgw_csum_xor { + __s8 from_idx; + __s8 to_idx; + __s8 result_idx; + __u8 init_xor_val; +} __attribute__((packed)); + +struct cgw_csum_crc8 { + __s8 from_idx; + __s8 to_idx; + __s8 result_idx; + __u8 init_crc_val; + __u8 final_xor_val; + __u8 crctab[256]; + __u8 profile; + __u8 profile_data[20]; +} __attribute__((packed)); + +/* length of checksum operation parameters. idx = index in CAN frame data[] */ +#define CGW_CS_XOR_LEN sizeof(struct cgw_csum_xor) +#define CGW_CS_CRC8_LEN sizeof(struct cgw_csum_crc8) + +/* CRC8 profiles (compute CRC for additional data elements - see below) */ +enum { + CGW_CRC8PRF_UNSPEC, + CGW_CRC8PRF_1U8, /* compute one additional u8 value */ + CGW_CRC8PRF_16U8, /* u8 value table indexed by data[1] & 0xF */ + CGW_CRC8PRF_SFFID_XOR, /* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */ + __CGW_CRC8PRF_MAX +}; + +#define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1) + +/* + * CAN rtnetlink attribute contents in detail + * + * CGW_XXX_IF (length 4 bytes): + * Sets an interface index for source/destination network interfaces. + * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory. + * + * CGW_FILTER (length 8 bytes): + * Sets a CAN receive filter for the gateway job specified by the + * struct can_filter described in include/linux/can.h + * + * CGW_MOD_XXX (length 17 bytes): + * Specifies a modification that's done to a received CAN frame before it is + * send out to the destination interface. + * + * <struct can_frame> data used as operator + * <u8> affected CAN frame elements + * + * CGW_CS_XOR (length 4 bytes): + * Set a simple XOR checksum starting with an initial value into + * data[result-idx] using data[start-idx] .. data[end-idx] + * + * The XOR checksum is calculated like this: + * + * xor = init_xor_val + * + * for (i = from_idx .. to_idx) + * xor ^= can_frame.data[i] + * + * can_frame.data[ result_idx ] = xor + * + * CGW_CS_CRC8 (length 282 bytes): + * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table, + * a given initial value and a defined input data[start-idx] .. data[end-idx]. + * Finally the result value is XOR'ed with the final_xor_val. + * + * The CRC8 checksum is calculated like this: + * + * crc = init_crc_val + * + * for (i = from_idx .. to_idx) + * crc = crctab[ crc ^ can_frame.data[i] ] + * + * can_frame.data[ result_idx ] = crc ^ final_xor_val + * + * The calculated CRC may contain additional source data elements that can be + * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs + * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf + * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs) + * that are used depending on counter values inside the CAN frame data[]. + * So far only three profiles have been implemented for illustration. + * + * Remark: In general the attribute data is a linear buffer. + * Beware of sending unpacked or aligned structs! + */ + +#endif diff --git a/include/linux/can/netlink.h b/include/linux/can/netlink.h index 34542d374dd8..14966ddb7df1 100644 --- a/include/linux/can/netlink.h +++ b/include/linux/can/netlink.h @@ -5,8 +5,6 @@ * * Copyright (c) 2009 Wolfgang Grandegger <wg@grandegger.com> * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_NETLINK_H diff --git a/include/linux/can/raw.h b/include/linux/can/raw.h index b2a0f87492c5..781f3a3701be 100644 --- a/include/linux/can/raw.h +++ b/include/linux/can/raw.h @@ -8,8 +8,6 @@ * Copyright (c) 2002-2007 Volkswagen Group Electronic Research * All rights reserved. * - * Send feedback to <socketcan-users@lists.berlios.de> - * */ #ifndef CAN_RAW_H diff --git a/include/linux/capability.h b/include/linux/capability.h index c42112350003..a63d13d84ad8 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -198,7 +198,7 @@ struct cpu_vfs_cap_data { /* Allow modification of routing tables */ /* Allow setting arbitrary process / process group ownership on sockets */ -/* Allow binding to any address for transparent proxying */ +/* Allow binding to any address for transparent proxying (also via NET_RAW) */ /* Allow setting TOS (type of service) */ /* Allow setting promiscuous mode */ /* Allow clearing driver statistics */ @@ -210,6 +210,7 @@ struct cpu_vfs_cap_data { /* Allow use of RAW sockets */ /* Allow use of PACKET sockets */ +/* Allow binding to any address for transparent proxying (also via NET_ADMIN) */ #define CAP_NET_RAW 13 diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h index 563755181c1e..95bd8502e715 100644 --- a/include/linux/ceph/libceph.h +++ b/include/linux/ceph/libceph.h @@ -215,7 +215,9 @@ extern void ceph_destroy_options(struct ceph_options *opt); extern int ceph_compare_options(struct ceph_options *new_opt, struct ceph_client *client); extern struct ceph_client *ceph_create_client(struct ceph_options *opt, - void *private); + void *private, + unsigned supported_features, + unsigned required_features); extern u64 ceph_client_id(struct ceph_client *client); extern void ceph_destroy_client(struct ceph_client *client); extern int __ceph_open_session(struct ceph_client *client, diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h index d7adf151d335..ffbeb2c217b4 100644 --- a/include/linux/ceph/messenger.h +++ b/include/linux/ceph/messenger.h @@ -6,7 +6,6 @@ #include <linux/net.h> #include <linux/radix-tree.h> #include <linux/uio.h> -#include <linux/version.h> #include <linux/workqueue.h> #include "types.h" @@ -238,7 +237,8 @@ extern void ceph_con_keepalive(struct ceph_connection *con); extern struct ceph_connection *ceph_con_get(struct ceph_connection *con); extern void ceph_con_put(struct ceph_connection *con); -extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags); +extern struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags, + bool can_fail); extern void ceph_msg_kfree(struct ceph_msg *m); diff --git a/include/linux/clk.h b/include/linux/clk.h index 1d37f42ac294..7213b52b2c0e 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -11,6 +11,8 @@ #ifndef __LINUX_CLK_H #define __LINUX_CLK_H +#include <linux/kernel.h> + struct device; /* @@ -41,11 +43,31 @@ struct clk; struct clk *clk_get(struct device *dev, const char *id); /** + * clk_prepare - prepare a clock source + * @clk: clock source + * + * This prepares the clock source for use. + * + * Must not be called from within atomic context. + */ +#ifdef CONFIG_HAVE_CLK_PREPARE +int clk_prepare(struct clk *clk); +#else +static inline int clk_prepare(struct clk *clk) +{ + might_sleep(); + return 0; +} +#endif + +/** * clk_enable - inform the system when the clock source should be running. * @clk: clock source * * If the clock can not be enabled/disabled, this should return success. * + * May be called from atomic contexts. + * * Returns success (0) or negative errno. */ int clk_enable(struct clk *clk); @@ -57,6 +79,8 @@ int clk_enable(struct clk *clk); * Inform the system that a clock source is no longer required by * a driver and may be shut down. * + * May be called from atomic contexts. + * * Implementation detail: if the clock source is shared between * multiple drivers, clk_enable() calls must be balanced by the * same number of clk_disable() calls for the clock source to be @@ -64,6 +88,25 @@ int clk_enable(struct clk *clk); */ void clk_disable(struct clk *clk); + +/** + * clk_unprepare - undo preparation of a clock source + * @clk: clock source + * + * This undoes a previously prepared clock. The caller must balance + * the number of prepare and unprepare calls. + * + * Must not be called from within atomic context. + */ +#ifdef CONFIG_HAVE_CLK_PREPARE +void clk_unprepare(struct clk *clk); +#else +static inline void clk_unprepare(struct clk *clk) +{ + might_sleep(); +} +#endif + /** * clk_get_rate - obtain the current clock rate (in Hz) for a clock source. * This is only valid once the clock source has been enabled. diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h index 457bcb0a310a..d9a4fd028c9d 100644 --- a/include/linux/clkdev.h +++ b/include/linux/clkdev.h @@ -24,6 +24,13 @@ struct clk_lookup { struct clk *clk; }; +#define CLKDEV_INIT(d, n, c) \ + { \ + .dev_id = d, \ + .con_id = n, \ + .clk = c, \ + } + struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...); diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h index d6733e27af34..81e803e90aa4 100644 --- a/include/linux/clockchips.h +++ b/include/linux/clockchips.h @@ -45,20 +45,22 @@ enum clock_event_nofitiers { */ #define CLOCK_EVT_FEAT_PERIODIC 0x000001 #define CLOCK_EVT_FEAT_ONESHOT 0x000002 +#define CLOCK_EVT_FEAT_KTIME 0x000004 /* * x86(64) specific misfeatures: * * - Clockevent source stops in C3 State and needs broadcast support. * - Local APIC timer is used as a dummy device. */ -#define CLOCK_EVT_FEAT_C3STOP 0x000004 -#define CLOCK_EVT_FEAT_DUMMY 0x000008 +#define CLOCK_EVT_FEAT_C3STOP 0x000008 +#define CLOCK_EVT_FEAT_DUMMY 0x000010 /** * struct clock_event_device - clock event device descriptor * @event_handler: Assigned by the framework to be called by the low * level handler of the event source - * @set_next_event: set next event function + * @set_next_event: set next event function using a clocksource delta + * @set_next_ktime: set next event function using a direct ktime value * @next_event: local storage for the next event in oneshot mode * @max_delta_ns: maximum delta value in ns * @min_delta_ns: minimum delta value in ns @@ -81,6 +83,8 @@ struct clock_event_device { void (*event_handler)(struct clock_event_device *); int (*set_next_event)(unsigned long evt, struct clock_event_device *); + int (*set_next_ktime)(ktime_t expires, + struct clock_event_device *); ktime_t next_event; u64 max_delta_ns; u64 min_delta_ns; @@ -140,7 +144,7 @@ extern void clockevents_set_mode(struct clock_event_device *dev, enum clock_event_mode mode); extern int clockevents_register_notifier(struct notifier_block *nb); extern int clockevents_program_event(struct clock_event_device *dev, - ktime_t expires, ktime_t now); + ktime_t expires, bool force); extern void clockevents_handle_noop(struct clock_event_device *dev); diff --git a/include/linux/cn_proc.h b/include/linux/cn_proc.h index 12c517b51ca2..d03612b196e1 100644 --- a/include/linux/cn_proc.h +++ b/include/linux/cn_proc.h @@ -54,6 +54,7 @@ struct proc_event { PROC_EVENT_GID = 0x00000040, PROC_EVENT_SID = 0x00000080, PROC_EVENT_PTRACE = 0x00000100, + PROC_EVENT_COMM = 0x00000200, /* "next" should be 0x00000400 */ /* "last" is the last process event: exit */ PROC_EVENT_EXIT = 0x80000000 @@ -103,6 +104,12 @@ struct proc_event { __kernel_pid_t tracer_tgid; } ptrace; + struct comm_proc_event { + __kernel_pid_t process_pid; + __kernel_pid_t process_tgid; + char comm[16]; + } comm; + struct exit_proc_event { __kernel_pid_t process_pid; __kernel_pid_t process_tgid; @@ -118,6 +125,7 @@ void proc_exec_connector(struct task_struct *task); void proc_id_connector(struct task_struct *task, int which_id); void proc_sid_connector(struct task_struct *task); void proc_ptrace_connector(struct task_struct *task, int which_id); +void proc_comm_connector(struct task_struct *task); void proc_exit_connector(struct task_struct *task); #else static inline void proc_fork_connector(struct task_struct *task) @@ -133,6 +141,9 @@ static inline void proc_id_connector(struct task_struct *task, static inline void proc_sid_connector(struct task_struct *task) {} +static inline void proc_comm_connector(struct task_struct *task) +{} + static inline void proc_ptrace_connector(struct task_struct *task, int ptrace_id) {} diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h new file mode 100644 index 000000000000..455b233dd3b1 --- /dev/null +++ b/include/linux/cpu_pm.h @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * Author: + * Colin Cross <ccross@android.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _LINUX_CPU_PM_H +#define _LINUX_CPU_PM_H + +#include <linux/kernel.h> +#include <linux/notifier.h> + +/* + * When a CPU goes to a low power state that turns off power to the CPU's + * power domain, the contents of some blocks (floating point coprocessors, + * interrupt controllers, caches, timers) in the same power domain can + * be lost. The cpm_pm notifiers provide a method for platform idle, suspend, + * and hotplug implementations to notify the drivers for these blocks that + * they may be reset. + * + * All cpu_pm notifications must be called with interrupts disabled. + * + * The notifications are split into two classes: CPU notifications and CPU + * cluster notifications. + * + * CPU notifications apply to a single CPU and must be called on the affected + * CPU. They are used to save per-cpu context for affected blocks. + * + * CPU cluster notifications apply to all CPUs in a single power domain. They + * are used to save any global context for affected blocks, and must be called + * after all the CPUs in the power domain have been notified of the low power + * state. + */ + +/* + * Event codes passed as unsigned long val to notifier calls + */ +enum cpu_pm_event { + /* A single cpu is entering a low power state */ + CPU_PM_ENTER, + + /* A single cpu failed to enter a low power state */ + CPU_PM_ENTER_FAILED, + + /* A single cpu is exiting a low power state */ + CPU_PM_EXIT, + + /* A cpu power domain is entering a low power state */ + CPU_CLUSTER_PM_ENTER, + + /* A cpu power domain failed to enter a low power state */ + CPU_CLUSTER_PM_ENTER_FAILED, + + /* A cpu power domain is exiting a low power state */ + CPU_CLUSTER_PM_EXIT, +}; + +#ifdef CONFIG_CPU_PM +int cpu_pm_register_notifier(struct notifier_block *nb); +int cpu_pm_unregister_notifier(struct notifier_block *nb); +int cpu_pm_enter(void); +int cpu_pm_exit(void); +int cpu_cluster_pm_enter(void); +int cpu_cluster_pm_exit(void); + +#else + +static inline int cpu_pm_register_notifier(struct notifier_block *nb) +{ + return 0; +} + +static inline int cpu_pm_unregister_notifier(struct notifier_block *nb) +{ + return 0; +} + +static inline int cpu_pm_enter(void) +{ + return 0; +} + +static inline int cpu_pm_exit(void) +{ + return 0; +} + +static inline int cpu_cluster_pm_enter(void) +{ + return 0; +} + +static inline int cpu_cluster_pm_exit(void) +{ + return 0; +} +#endif +#endif diff --git a/include/linux/devfreq.h b/include/linux/devfreq.h new file mode 100644 index 000000000000..afb94583960c --- /dev/null +++ b/include/linux/devfreq.h @@ -0,0 +1,238 @@ +/* + * devfreq: Generic Dynamic Voltage and Frequency Scaling (DVFS) Framework + * for Non-CPU Devices. + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham <myungjoo.ham@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_DEVFREQ_H__ +#define __LINUX_DEVFREQ_H__ + +#include <linux/device.h> +#include <linux/notifier.h> +#include <linux/opp.h> + +#define DEVFREQ_NAME_LEN 16 + +struct devfreq; + +/** + * struct devfreq_dev_status - Data given from devfreq user device to + * governors. Represents the performance + * statistics. + * @total_time The total time represented by this instance of + * devfreq_dev_status + * @busy_time The time that the device was working among the + * total_time. + * @current_frequency The operating frequency. + * @private_data An entry not specified by the devfreq framework. + * A device and a specific governor may have their + * own protocol with private_data. However, because + * this is governor-specific, a governor using this + * will be only compatible with devices aware of it. + */ +struct devfreq_dev_status { + /* both since the last measure */ + unsigned long total_time; + unsigned long busy_time; + unsigned long current_frequency; + void *private_date; +}; + +/** + * struct devfreq_dev_profile - Devfreq's user device profile + * @initial_freq The operating frequency when devfreq_add_device() is + * called. + * @polling_ms The polling interval in ms. 0 disables polling. + * @target The device should set its operating frequency at + * freq or lowest-upper-than-freq value. If freq is + * higher than any operable frequency, set maximum. + * Before returning, target function should set + * freq at the current frequency. + * @get_dev_status The device should provide the current performance + * status to devfreq, which is used by governors. + * @exit An optional callback that is called when devfreq + * is removing the devfreq object due to error or + * from devfreq_remove_device() call. If the user + * has registered devfreq->nb at a notifier-head, + * this is the time to unregister it. + */ +struct devfreq_dev_profile { + unsigned long initial_freq; + unsigned int polling_ms; + + int (*target)(struct device *dev, unsigned long *freq); + int (*get_dev_status)(struct device *dev, + struct devfreq_dev_status *stat); + void (*exit)(struct device *dev); +}; + +/** + * struct devfreq_governor - Devfreq policy governor + * @name Governor's name + * @get_target_freq Returns desired operating frequency for the device. + * Basically, get_target_freq will run + * devfreq_dev_profile.get_dev_status() to get the + * status of the device (load = busy_time / total_time). + * If no_central_polling is set, this callback is called + * only with update_devfreq() notified by OPP. + * @init Called when the devfreq is being attached to a device + * @exit Called when the devfreq is being removed from a + * device. Governor should stop any internal routines + * before return because related data may be + * freed after exit(). + * @no_central_polling Do not use devfreq's central polling mechanism. + * When this is set, devfreq will not call + * get_target_freq with devfreq_monitor(). However, + * devfreq will call get_target_freq with + * devfreq_update() notified by OPP framework. + * + * Note that the callbacks are called with devfreq->lock locked by devfreq. + */ +struct devfreq_governor { + const char name[DEVFREQ_NAME_LEN]; + int (*get_target_freq)(struct devfreq *this, unsigned long *freq); + int (*init)(struct devfreq *this); + void (*exit)(struct devfreq *this); + const bool no_central_polling; +}; + +/** + * struct devfreq - Device devfreq structure + * @node list node - contains the devices with devfreq that have been + * registered. + * @lock a mutex to protect accessing devfreq. + * @dev device registered by devfreq class. dev.parent is the device + * using devfreq. + * @profile device-specific devfreq profile + * @governor method how to choose frequency based on the usage. + * @nb notifier block used to notify devfreq object that it should + * reevaluate operable frequencies. Devfreq users may use + * devfreq.nb to the corresponding register notifier call chain. + * @polling_jiffies interval in jiffies. + * @previous_freq previously configured frequency value. + * @next_polling the number of remaining jiffies to poll with + * "devfreq_monitor" executions to reevaluate + * frequency/voltage of the device. Set by + * profile's polling_ms interval. + * @data Private data of the governor. The devfreq framework does not + * touch this. + * @being_removed a flag to mark that this object is being removed in + * order to prevent trying to remove the object multiple times. + * + * This structure stores the devfreq information for a give device. + * + * Note that when a governor accesses entries in struct devfreq in its + * functions except for the context of callbacks defined in struct + * devfreq_governor, the governor should protect its access with the + * struct mutex lock in struct devfreq. A governor may use this mutex + * to protect its own private data in void *data as well. + */ +struct devfreq { + struct list_head node; + + struct mutex lock; + struct device dev; + struct devfreq_dev_profile *profile; + const struct devfreq_governor *governor; + struct notifier_block nb; + + unsigned long polling_jiffies; + unsigned long previous_freq; + unsigned int next_polling; + + void *data; /* private data for governors */ + + bool being_removed; +}; + +#if defined(CONFIG_PM_DEVFREQ) +extern struct devfreq *devfreq_add_device(struct device *dev, + struct devfreq_dev_profile *profile, + const struct devfreq_governor *governor, + void *data); +extern int devfreq_remove_device(struct devfreq *devfreq); + +/* Helper functions for devfreq user device driver with OPP. */ +extern struct opp *devfreq_recommended_opp(struct device *dev, + unsigned long *freq); +extern int devfreq_register_opp_notifier(struct device *dev, + struct devfreq *devfreq); +extern int devfreq_unregister_opp_notifier(struct device *dev, + struct devfreq *devfreq); + +#ifdef CONFIG_DEVFREQ_GOV_POWERSAVE +extern const struct devfreq_governor devfreq_powersave; +#endif +#ifdef CONFIG_DEVFREQ_GOV_PERFORMANCE +extern const struct devfreq_governor devfreq_performance; +#endif +#ifdef CONFIG_DEVFREQ_GOV_USERSPACE +extern const struct devfreq_governor devfreq_userspace; +#endif +#ifdef CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND +extern const struct devfreq_governor devfreq_simple_ondemand; +/** + * struct devfreq_simple_ondemand_data - void *data fed to struct devfreq + * and devfreq_add_device + * @ upthreshold If the load is over this value, the frequency jumps. + * Specify 0 to use the default. Valid value = 0 to 100. + * @ downdifferential If the load is under upthreshold - downdifferential, + * the governor may consider slowing the frequency down. + * Specify 0 to use the default. Valid value = 0 to 100. + * downdifferential < upthreshold must hold. + * + * If the fed devfreq_simple_ondemand_data pointer is NULL to the governor, + * the governor uses the default values. + */ +struct devfreq_simple_ondemand_data { + unsigned int upthreshold; + unsigned int downdifferential; +}; +#endif + +#else /* !CONFIG_PM_DEVFREQ */ +static struct devfreq *devfreq_add_device(struct device *dev, + struct devfreq_dev_profile *profile, + struct devfreq_governor *governor, + void *data); +{ + return NULL; +} + +static int devfreq_remove_device(struct devfreq *devfreq); +{ + return 0; +} + +static struct opp *devfreq_recommended_opp(struct device *dev, + unsigned long *freq) +{ + return -EINVAL; +} + +static int devfreq_register_opp_notifier(struct device *dev, + struct devfreq *devfreq) +{ + return -EINVAL; +} + +static int devfreq_unregister_opp_notifier(struct device *dev, + struct devfreq *devfreq) +{ + return -EINVAL; +} + +#define devfreq_powersave NULL +#define devfreq_performance NULL +#define devfreq_userspace NULL +#define devfreq_simple_ondemand NULL + +#endif /* CONFIG_PM_DEVFREQ */ + +#endif /* __LINUX_DEVFREQ_H__ */ diff --git a/include/linux/device.h b/include/linux/device.h index e838e143baa7..85e78fc7d7fd 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -356,6 +356,8 @@ struct class_attribute { char *buf); ssize_t (*store)(struct class *class, struct class_attribute *attr, const char *buf, size_t count); + const void *(*namespace)(struct class *class, + const struct class_attribute *attr); }; #define CLASS_ATTR(_name, _mode, _show, _store) \ @@ -642,6 +644,11 @@ static inline void set_dev_node(struct device *dev, int node) } #endif +static inline struct pm_subsys_data *dev_to_psd(struct device *dev) +{ + return dev ? dev->power.subsys_data : NULL; +} + static inline unsigned int dev_get_uevent_suppress(const struct device *dev) { return dev->kobj.uevent_suppress; @@ -791,6 +798,8 @@ extern const char *dev_driver_string(const struct device *dev); #ifdef CONFIG_PRINTK +extern int __dev_printk(const char *level, const struct device *dev, + struct va_format *vaf); extern int dev_printk(const char *level, const struct device *dev, const char *fmt, ...) __attribute__ ((format (printf, 3, 4))); @@ -811,6 +820,9 @@ extern int _dev_info(const struct device *dev, const char *fmt, ...) #else +static inline int __dev_printk(const char *level, const struct device *dev, + struct va_format *vaf) + { return 0; } static inline int dev_printk(const char *level, const struct device *dev, const char *fmt, ...) __attribute__ ((format (printf, 3, 4))); diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h index bbd8661b3473..ef90cbd8e173 100644 --- a/include/linux/dma_remapping.h +++ b/include/linux/dma_remapping.h @@ -25,11 +25,12 @@ struct intel_iommu; struct dmar_domain; struct root_entry; -extern void free_dmar_iommu(struct intel_iommu *iommu); -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU +extern void free_dmar_iommu(struct intel_iommu *iommu); extern int iommu_calculate_agaw(struct intel_iommu *iommu); extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu); +extern int dmar_disabled; #else static inline int iommu_calculate_agaw(struct intel_iommu *iommu) { @@ -39,8 +40,11 @@ static inline int iommu_calculate_max_sagaw(struct intel_iommu *iommu) { return 0; } +static inline void free_dmar_iommu(struct intel_iommu *iommu) +{ +} +#define dmar_disabled (1) #endif -extern int dmar_disabled; #endif diff --git a/include/linux/dmar.h b/include/linux/dmar.h index 7b776d71d36d..a8b1a847c103 100644 --- a/include/linux/dmar.h +++ b/include/linux/dmar.h @@ -26,8 +26,13 @@ #include <linux/msi.h> #include <linux/irqreturn.h> +/* DMAR Flags */ +#define DMAR_INTR_REMAP 0x1 +#define DMAR_X2APIC_OPT_OUT 0x2 + struct intel_iommu; -#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) +#ifdef CONFIG_DMAR_TABLE +extern struct acpi_table_header *dmar_tbl; struct dmar_drhd_unit { struct list_head list; /* list of drhd units */ struct acpi_dmar_header *hdr; /* ACPI header */ @@ -76,7 +81,7 @@ static inline int enable_drhd_fault_handling(void) { return -1; } -#endif /* !CONFIG_DMAR && !CONFIG_INTR_REMAP */ +#endif /* !CONFIG_DMAR_TABLE */ struct irte { union { @@ -107,10 +112,10 @@ struct irte { }; }; -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP extern int intr_remapping_enabled; extern int intr_remapping_supported(void); -extern int enable_intr_remapping(int); +extern int enable_intr_remapping(void); extern void disable_intr_remapping(void); extern int reenable_intr_remapping(int); @@ -177,7 +182,7 @@ static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev) #define intr_remapping_enabled (0) -static inline int enable_intr_remapping(int eim) +static inline int enable_intr_remapping(void) { return -1; } @@ -192,6 +197,11 @@ static inline int reenable_intr_remapping(int eim) } #endif +enum { + IRQ_REMAP_XAPIC_MODE, + IRQ_REMAP_X2APIC_MODE, +}; + /* Can't use the common MSI interrupt functions * since DMAR is not a pci device */ @@ -204,7 +214,7 @@ extern int dmar_set_interrupt(struct intel_iommu *iommu); extern irqreturn_t dmar_fault(int irq, void *dev_id); extern int arch_setup_dmar_msi(unsigned int irq); -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU extern int iommu_detected, no_iommu; extern struct list_head dmar_rmrr_units; struct dmar_rmrr_unit { @@ -227,9 +237,26 @@ struct dmar_atsr_unit { u8 include_all:1; /* include all ports */ }; +int dmar_parse_rmrr_atsr_dev(void); +extern int dmar_parse_one_rmrr(struct acpi_dmar_header *header); +extern int dmar_parse_one_atsr(struct acpi_dmar_header *header); +extern int dmar_parse_dev_scope(void *start, void *end, int *cnt, + struct pci_dev ***devices, u16 segment); extern int intel_iommu_init(void); -#else /* !CONFIG_DMAR: */ +#else /* !CONFIG_INTEL_IOMMU: */ static inline int intel_iommu_init(void) { return -ENODEV; } -#endif /* CONFIG_DMAR */ +static inline int dmar_parse_one_rmrr(struct acpi_dmar_header *header) +{ + return 0; +} +static inline int dmar_parse_one_atsr(struct acpi_dmar_header *header) +{ + return 0; +} +static inline int dmar_parse_rmrr_atsr_dev(void) +{ + return 0; +} +#endif /* CONFIG_INTEL_IOMMU */ #endif /* __DMAR_H__ */ diff --git a/include/linux/drbd_tag_magic.h b/include/linux/drbd_tag_magic.h index 069543190516..81f52f2c5724 100644 --- a/include/linux/drbd_tag_magic.h +++ b/include/linux/drbd_tag_magic.h @@ -28,7 +28,7 @@ enum packet_types { #define NL_STRING(pn, pr, member, len) \ unsigned char member[len]; int member ## _len; \ int tag_and_len ## member; -#include "linux/drbd_nl.h" +#include <linux/drbd_nl.h> /* declare tag-list-sizes */ static const int tag_list_sizes[] = { diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h index 49638ea3b776..07261d52a6df 100644 --- a/include/linux/dw_apb_timer.h +++ b/include/linux/dw_apb_timer.h @@ -46,7 +46,7 @@ struct dw_apb_clock_event_device * dw_apb_clockevent_init(int cpu, const char *name, unsigned rating, void __iomem *base, int irq, unsigned long freq); struct dw_apb_clocksource * -dw_apb_clocksource_init(unsigned rating, char *name, void __iomem *base, +dw_apb_clocksource_init(unsigned rating, const char *name, void __iomem *base, unsigned long freq); void dw_apb_clocksource_register(struct dw_apb_clocksource *dw_cs); void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs); diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index e747ecd48e1c..13aae8087b56 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -1,13 +1,6 @@ #ifndef _DYNAMIC_DEBUG_H #define _DYNAMIC_DEBUG_H -/* dynamic_printk_enabled, and dynamic_printk_enabled2 are bitmasks in which - * bit n is set to 1 if any modname hashes into the bucket n, 0 otherwise. They - * use independent hash functions, to reduce the chance of false positives. - */ -extern long long dynamic_debug_enabled; -extern long long dynamic_debug_enabled2; - /* * An instance of this structure is created in a special * ELF section at every dynamic debug callsite. At runtime, @@ -47,26 +40,55 @@ extern int ddebug_remove_module(const char *mod_name); extern int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...) __attribute__ ((format (printf, 2, 3))); -#define dynamic_pr_debug(fmt, ...) do { \ - static struct _ddebug descriptor \ - __used \ - __attribute__((section("__verbose"), aligned(8))) = \ - { KBUILD_MODNAME, __func__, __FILE__, fmt, __LINE__, \ - _DPRINTK_FLAGS_DEFAULT }; \ - if (unlikely(descriptor.enabled)) \ - __dynamic_pr_debug(&descriptor, pr_fmt(fmt), ##__VA_ARGS__); \ - } while (0) - - -#define dynamic_dev_dbg(dev, fmt, ...) do { \ - static struct _ddebug descriptor \ - __used \ - __attribute__((section("__verbose"), aligned(8))) = \ - { KBUILD_MODNAME, __func__, __FILE__, fmt, __LINE__, \ - _DPRINTK_FLAGS_DEFAULT }; \ - if (unlikely(descriptor.enabled)) \ - dev_printk(KERN_DEBUG, dev, fmt, ##__VA_ARGS__); \ - } while (0) +struct device; + +extern int __dynamic_dev_dbg(struct _ddebug *descriptor, + const struct device *dev, + const char *fmt, ...) + __attribute__ ((format (printf, 3, 4))); + +struct net_device; + +extern int __dynamic_netdev_dbg(struct _ddebug *descriptor, + const struct net_device *dev, + const char *fmt, ...) + __attribute__ ((format (printf, 3, 4))); + +#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \ + static struct _ddebug __used __aligned(8) \ + __attribute__((section("__verbose"))) name = { \ + .modname = KBUILD_MODNAME, \ + .function = __func__, \ + .filename = __FILE__, \ + .format = (fmt), \ + .lineno = __LINE__, \ + .flags = _DPRINTK_FLAGS_DEFAULT, \ + .enabled = false, \ + } + +#define dynamic_pr_debug(fmt, ...) \ +do { \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.enabled)) \ + __dynamic_pr_debug(&descriptor, pr_fmt(fmt), \ + ##__VA_ARGS__); \ +} while (0) + +#define dynamic_dev_dbg(dev, fmt, ...) \ +do { \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.enabled)) \ + __dynamic_dev_dbg(&descriptor, dev, fmt, \ + ##__VA_ARGS__); \ +} while (0) + +#define dynamic_netdev_dbg(dev, fmt, ...) \ +do { \ + DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ + if (unlikely(descriptor.enabled)) \ + __dynamic_netdev_dbg(&descriptor, dev, fmt, \ + ##__VA_ARGS__); \ +} while (0) #else diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c6e427ab65fe..45f00b61c096 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -117,99 +117,101 @@ struct ethtool_eeprom { __u8 data[0]; }; -/* for configuring coalescing parameters of chip */ +/** + * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates + * @cmd: ETHTOOL_{G,S}COALESCE + * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after + * a packet arrives. + * @rx_max_coalesced_frames: Maximum number of packets to receive + * before an RX interrupt. + * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after + * a packet is sent. + * @tx_max_coalesced_frames: Maximum number of packets to be sent + * before a TX interrupt. + * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @stats_block_coalesce_usecs: How many usecs to delay in-memory + * statistics block updates. Some drivers do not have an + * in-memory statistic block, and in such cases this value is + * ignored. This value must not be zero. + * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. + * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. + * @pkt_rate_low: Threshold for low packet rate (packets per second). + * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is below @pkt_rate_low. + * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before + * a TX interrupt, when the packet rate is below @pkt_rate_low. + * @pkt_rate_high: Threshold for high packet rate (packets per second). + * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is above @pkt_rate_high. + * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before + * a TX interrupt, when the packet rate is above @pkt_rate_high. + * @rate_sample_interval: How often to do adaptive coalescing packet rate + * sampling, measured in seconds. Must not be zero. + * + * Each pair of (usecs, max_frames) fields specifies this exit + * condition for interrupt coalescing: + * (usecs > 0 && time_since_first_completion >= usecs) || + * (max_frames > 0 && completed_frames >= max_frames) + * It is illegal to set both usecs and max_frames to zero as this + * would cause interrupts to never be generated. To disable + * coalescing, set usecs = 0 and max_frames = 1. + * + * Some implementations ignore the value of max_frames and use the + * condition: + * time_since_first_completion >= usecs + * This is deprecated. Drivers for hardware that does not support + * counting completions should validate that max_frames == !rx_usecs. + * + * Adaptive RX/TX coalescing is an algorithm implemented by some + * drivers to improve latency under low packet rates and improve + * throughput under high packet rates. Some drivers only implement + * one of RX or TX adaptive coalescing. Anything not implemented by + * the driver causes these values to be silently ignored. + * + * When the packet rate is below @pkt_rate_high but above + * @pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ struct ethtool_coalesce { - __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ + __u32 cmd; __u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ __u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 rx_coalesce_usecs_irq; __u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ __u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ __u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 tx_coalesce_usecs_irq; __u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ __u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ __u32 use_adaptive_rx_coalesce; __u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ __u32 pkt_rate_low; __u32 rx_coalesce_usecs_low; __u32 rx_max_coalesced_frames_low; __u32 tx_coalesce_usecs_low; __u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ __u32 pkt_rate_high; __u32 rx_coalesce_usecs_high; __u32 rx_max_coalesced_frames_high; __u32 tx_coalesce_usecs_high; __u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ __u32 rate_sample_interval; }; @@ -444,7 +446,7 @@ struct ethtool_flow_ext { }; /** - * struct ethtool_rx_flow_spec - specification for RX flow filter + * struct ethtool_rx_flow_spec - classification rule for RX flows * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW * @h_u: Flow fields to match (dependent on @flow_type) * @h_ext: Additional fields to match @@ -454,7 +456,9 @@ struct ethtool_flow_ext { * includes the %FLOW_EXT flag. * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded - * @location: Index of filter in hardware table + * @location: Location of rule in the table. Locations must be + * numbered such that a flow matching multiple rules will be + * classified according to the first (lowest numbered) rule. */ struct ethtool_rx_flow_spec { __u32 flow_type; @@ -473,9 +477,9 @@ struct ethtool_rx_flow_spec { * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW * @data: Command-dependent value - * @fs: Flow filter specification + * @fs: Flow classification rule * @rule_cnt: Number of rules to be affected - * @rule_locs: Array of valid rule indices + * @rule_locs: Array of used rule locations * * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following @@ -487,23 +491,20 @@ struct ethtool_rx_flow_spec { * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined * rules on return. * - * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the index of an - * existing filter rule on entry and @fs contains the rule on return. + * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an + * existing rule on entry and @fs contains the rule on return. * * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the * user buffer for @rule_locs on entry. On return, @data is the size - * of the filter table and @rule_locs contains the indices of the - * defined rules. + * of the rule table, @rule_cnt is the number of defined rules, and + * @rule_locs contains the locations of the defined rules. Drivers + * must use the second parameter to get_rxnfc() instead of @rule_locs. * - * For %ETHTOOL_SRXCLSRLINS, @fs specifies the filter rule to add or - * update. @fs.@location specifies the index to use and must not be - * ignored. + * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update. + * @fs.@location specifies the location to use and must not be ignored. * - * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the index of an - * existing filter rule on entry. - * - * Implementation of indexed classification rules generally requires a - * TCAM. + * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an + * existing rule on entry. */ struct ethtool_rxnfc { __u32 cmd; @@ -726,6 +727,9 @@ enum ethtool_sfeatures_retval_bits { /* needed by dev_disable_lro() */ extern int __ethtool_set_flags(struct net_device *dev, u32 flags); +extern int __ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd); + /** * enum ethtool_phys_id_state - indicator state for physical identification * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated @@ -936,7 +940,7 @@ struct ethtool_ops { int (*set_priv_flags)(struct net_device *, u32); int (*get_sset_count)(struct net_device *, int); int (*get_rxnfc)(struct net_device *, - struct ethtool_rxnfc *, void *); + struct ethtool_rxnfc *, u32 *rule_locs); int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); int (*flash_device)(struct net_device *, struct ethtool_flash *); int (*reset)(struct net_device *, u32 *); diff --git a/include/linux/evm.h b/include/linux/evm.h new file mode 100644 index 000000000000..9fc13a760928 --- /dev/null +++ b/include/linux/evm.h @@ -0,0 +1,100 @@ +/* + * evm.h + * + * Copyright (c) 2009 IBM Corporation + * Author: Mimi Zohar <zohar@us.ibm.com> + */ + +#ifndef _LINUX_EVM_H +#define _LINUX_EVM_H + +#include <linux/integrity.h> +#include <linux/xattr.h> + +struct integrity_iint_cache; + +#ifdef CONFIG_EVM +extern enum integrity_status evm_verifyxattr(struct dentry *dentry, + const char *xattr_name, + void *xattr_value, + size_t xattr_value_len, + struct integrity_iint_cache *iint); +extern int evm_inode_setattr(struct dentry *dentry, struct iattr *attr); +extern void evm_inode_post_setattr(struct dentry *dentry, int ia_valid); +extern int evm_inode_setxattr(struct dentry *dentry, const char *name, + const void *value, size_t size); +extern void evm_inode_post_setxattr(struct dentry *dentry, + const char *xattr_name, + const void *xattr_value, + size_t xattr_value_len); +extern int evm_inode_removexattr(struct dentry *dentry, const char *xattr_name); +extern void evm_inode_post_removexattr(struct dentry *dentry, + const char *xattr_name); +extern int evm_inode_init_security(struct inode *inode, + const struct xattr *xattr_array, + struct xattr *evm); +#ifdef CONFIG_FS_POSIX_ACL +extern int posix_xattr_acl(const char *xattrname); +#else +static inline int posix_xattr_acl(const char *xattrname) +{ + return 0; +} +#endif +#else +#ifdef CONFIG_INTEGRITY +static inline enum integrity_status evm_verifyxattr(struct dentry *dentry, + const char *xattr_name, + void *xattr_value, + size_t xattr_value_len, + struct integrity_iint_cache *iint) +{ + return INTEGRITY_UNKNOWN; +} +#endif + +static inline int evm_inode_setattr(struct dentry *dentry, struct iattr *attr) +{ + return 0; +} + +static inline void evm_inode_post_setattr(struct dentry *dentry, int ia_valid) +{ + return; +} + +static inline int evm_inode_setxattr(struct dentry *dentry, const char *name, + const void *value, size_t size) +{ + return 0; +} + +static inline void evm_inode_post_setxattr(struct dentry *dentry, + const char *xattr_name, + const void *xattr_value, + size_t xattr_value_len) +{ + return; +} + +static inline int evm_inode_removexattr(struct dentry *dentry, + const char *xattr_name) +{ + return 0; +} + +static inline void evm_inode_post_removexattr(struct dentry *dentry, + const char *xattr_name) +{ + return; +} + +static inline int evm_inode_init_security(struct inode *inode, + const struct xattr *xattr_array, + struct xattr *evm) +{ + return 0; +} + +#endif /* CONFIG_EVM_H */ +#endif /* LINUX_EVM_H */ diff --git a/include/linux/filter.h b/include/linux/filter.h index 741956fa5bfd..8eeb205f298b 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -155,7 +155,7 @@ extern unsigned int sk_run_filter(const struct sk_buff *skb, const struct sock_filter *filter); extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk); extern int sk_detach_filter(struct sock *sk); -extern int sk_chk_filter(struct sock_filter *filter, int flen); +extern int sk_chk_filter(struct sock_filter *filter, unsigned int flen); #ifdef CONFIG_BPF_JIT extern void bpf_jit_compile(struct sk_filter *fp); diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 1effc8b56b4e..a49b52934c55 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -49,6 +49,7 @@ extern int thaw_process(struct task_struct *p); extern void refrigerator(void); extern int freeze_processes(void); +extern int freeze_kernel_threads(void); extern void thaw_processes(void); static inline int try_to_freeze(void) @@ -134,10 +135,25 @@ static inline void set_freezable_with_signal(void) } /* - * Freezer-friendly wrappers around wait_event_interruptible() and - * wait_event_interruptible_timeout(), originally defined in <linux/wait.h> + * Freezer-friendly wrappers around wait_event_interruptible(), + * wait_event_killable() and wait_event_interruptible_timeout(), originally + * defined in <linux/wait.h> */ +#define wait_event_freezekillable(wq, condition) \ +({ \ + int __retval; \ + do { \ + __retval = wait_event_killable(wq, \ + (condition) || freezing(current)); \ + if (__retval && !freezing(current)) \ + break; \ + else if (!(condition)) \ + __retval = -ERESTARTSYS; \ + } while (try_to_freeze()); \ + __retval; \ +}) + #define wait_event_freezable(wq, condition) \ ({ \ int __retval; \ @@ -171,7 +187,8 @@ static inline void clear_freeze_flag(struct task_struct *p) {} static inline int thaw_process(struct task_struct *p) { return 1; } static inline void refrigerator(void) {} -static inline int freeze_processes(void) { BUG(); return 0; } +static inline int freeze_processes(void) { return -ENOSYS; } +static inline int freeze_kernel_threads(void) { return -ENOSYS; } static inline void thaw_processes(void) {} static inline int try_to_freeze(void) { return 0; } @@ -188,6 +205,9 @@ static inline void set_freezable_with_signal(void) {} #define wait_event_freezable_timeout(wq, condition, timeout) \ wait_event_interruptible_timeout(wq, condition, timeout) +#define wait_event_freezekillable(wq, condition) \ + wait_event_killable(wq, condition) + #endif /* !CONFIG_FREEZER */ #endif /* FREEZER_H_INCLUDED */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 277f497923a2..14493a2d5a03 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -58,14 +58,15 @@ struct inodes_stat_t { #define NR_FILE 8192 /* this can well be larger on a larger system */ -#define MAY_EXEC 1 -#define MAY_WRITE 2 -#define MAY_READ 4 -#define MAY_APPEND 8 -#define MAY_ACCESS 16 -#define MAY_OPEN 32 -#define MAY_CHDIR 64 -#define MAY_NOT_BLOCK 128 /* called from RCU mode, don't block */ +#define MAY_EXEC 0x00000001 +#define MAY_WRITE 0x00000002 +#define MAY_READ 0x00000004 +#define MAY_APPEND 0x00000008 +#define MAY_ACCESS 0x00000010 +#define MAY_OPEN 0x00000020 +#define MAY_CHDIR 0x00000040 +/* called from RCU mode, don't block */ +#define MAY_NOT_BLOCK 0x00000080 /* * flags in file.f_mode. Note that FMODE_READ and FMODE_WRITE must correspond @@ -963,7 +964,12 @@ struct file { #define f_dentry f_path.dentry #define f_vfsmnt f_path.mnt const struct file_operations *f_op; - spinlock_t f_lock; /* f_ep_links, f_flags, no IRQ */ + + /* + * Protects f_ep_links, f_flags, f_pos vs i_size in lseek SEEK_CUR. + * Must not be taken from IRQ context. + */ + spinlock_t f_lock; #ifdef CONFIG_SMP int f_sb_list_cpu; #endif @@ -1063,6 +1069,8 @@ static inline int file_check_writeable(struct file *filp) #define FL_LEASE 32 /* lease held on this file */ #define FL_CLOSE 64 /* unlock on close */ #define FL_SLEEP 128 /* A blocking lock */ +#define FL_DOWNGRADE_PENDING 256 /* Lease is being downgraded */ +#define FL_UNLOCK_PENDING 512 /* Lease is being broken */ /* * Special return value from posix_lock_file() and vfs_lock_file() for @@ -1109,7 +1117,7 @@ struct file_lock { struct list_head fl_link; /* doubly linked list of all locks */ struct list_head fl_block; /* circular list of blocked processes */ fl_owner_t fl_owner; - unsigned char fl_flags; + unsigned int fl_flags; unsigned char fl_type; unsigned int fl_pid; struct pid *fl_nspid; @@ -1119,7 +1127,9 @@ struct file_lock { loff_t fl_end; struct fasync_struct * fl_fasync; /* for lease break notifications */ - unsigned long fl_break_time; /* for nonblocking lease breaks */ + /* for lease breaks: */ + unsigned long fl_break_time; + unsigned long fl_downgrade_time; const struct file_lock_operations *fl_ops; /* Callbacks for filesystems */ const struct lock_manager_operations *fl_lmops; /* Callbacks for lockmanagers */ @@ -2397,8 +2407,8 @@ file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping); extern loff_t noop_llseek(struct file *file, loff_t offset, int origin); extern loff_t no_llseek(struct file *file, loff_t offset, int origin); extern loff_t generic_file_llseek(struct file *file, loff_t offset, int origin); -extern loff_t generic_file_llseek_unlocked(struct file *file, loff_t offset, - int origin); +extern loff_t generic_file_llseek_size(struct file *file, loff_t offset, + int origin, loff_t maxsize); extern int generic_file_open(struct inode * inode, struct file * filp); extern int nonseekable_open(struct inode * inode, struct file * filp); diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h index daa9952d2174..11c16a1fb9e3 100644 --- a/include/linux/fsl-diu-fb.h +++ b/include/linux/fsl-diu-fb.h @@ -20,18 +20,8 @@ #ifndef __FSL_DIU_FB_H__ #define __FSL_DIU_FB_H__ -/* Arbitrary threshold to determine the allocation method - * See mpc8610fb_set_par(), map_video_memory(), and unmap_video_memory() - */ -#define MEM_ALLOC_THRESHOLD (1024*768*4+32) - #include <linux/types.h> -struct mfb_alpha { - int enable; - int alpha; -}; - struct mfb_chroma_key { int enable; __u8 red_max; @@ -43,25 +33,29 @@ struct mfb_chroma_key { }; struct aoi_display_offset { - int x_aoi_d; - int y_aoi_d; + __s32 x_aoi_d; + __s32 y_aoi_d; }; #define MFB_SET_CHROMA_KEY _IOW('M', 1, struct mfb_chroma_key) #define MFB_SET_BRIGHTNESS _IOW('M', 3, __u8) +#define MFB_SET_ALPHA _IOW('M', 0, __u8) +#define MFB_GET_ALPHA _IOR('M', 0, __u8) +#define MFB_SET_AOID _IOW('M', 4, struct aoi_display_offset) +#define MFB_GET_AOID _IOR('M', 4, struct aoi_display_offset) +#define MFB_SET_PIXFMT _IOW('M', 8, __u32) +#define MFB_GET_PIXFMT _IOR('M', 8, __u32) -#define MFB_SET_ALPHA 0x80014d00 -#define MFB_GET_ALPHA 0x40014d00 -#define MFB_SET_AOID 0x80084d04 -#define MFB_GET_AOID 0x40084d04 -#define MFB_SET_PIXFMT 0x80014d08 -#define MFB_GET_PIXFMT 0x40014d08 - -#define FBIOGET_GWINFO 0x46E0 -#define FBIOPUT_GWINFO 0x46E1 +/* + * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the + * wrong value for 'size' field of the ioctl. The current macros above use the + * right size, but we still need to provide backwards compatibility, at least + * for a while. +*/ +#define MFB_SET_PIXFMT_OLD 0x80014d08 +#define MFB_GET_PIXFMT_OLD 0x40014d08 #ifdef __KERNEL__ -#include <linux/spinlock.h> /* * These are the fields of area descriptor(in DDR memory) for every plane @@ -159,58 +153,12 @@ struct diu { __be32 plut; } __attribute__ ((packed)); -struct diu_hw { - struct diu *diu_reg; - spinlock_t reg_lock; - - __u32 mode; /* DIU operation mode */ -}; - -struct diu_addr { - __u8 __iomem *vaddr; /* Virtual address */ - dma_addr_t paddr; /* Physical address */ - __u32 offset; -}; - -struct diu_pool { - struct diu_addr ad; - struct diu_addr gamma; - struct diu_addr pallete; - struct diu_addr cursor; -}; - -#define FSL_DIU_BASE_OFFSET 0x2C000 /* Offset of DIU */ -#define INT_LCDC 64 /* DIU interrupt number */ - -#define FSL_AOI_NUM 6 /* 5 AOIs and one dummy AOI */ - /* 1 for plane 0, 2 for plane 1&2 each */ - -/* Minimum X and Y resolutions */ -#define MIN_XRES 64 -#define MIN_YRES 64 - -/* HW cursor parameters */ -#define MAX_CURS 32 - -/* Modes of operation of DIU */ +/* + * Modes of operation of DIU. The DIU supports five different modes, but + * the driver only supports modes 0 and 1. + */ #define MFB_MODE0 0 /* DIU off */ #define MFB_MODE1 1 /* All three planes output to display */ -#define MFB_MODE2 2 /* Plane 1 to display, planes 2+3 written back*/ -#define MFB_MODE3 3 /* All three planes written back to memory */ -#define MFB_MODE4 4 /* Color bar generation */ - -/* INT_STATUS/INT_MASK field descriptions */ -#define INT_VSYNC 0x01 /* Vsync interrupt */ -#define INT_VSYNC_WB 0x02 /* Vsync interrupt for write back operation */ -#define INT_UNDRUN 0x04 /* Under run exception interrupt */ -#define INT_PARERR 0x08 /* Display parameters error interrupt */ -#define INT_LS_BF_VS 0x10 /* Lines before vsync. interrupt */ - -/* Panels'operation modes */ -#define MFB_TYPE_OUTPUT 0 /* Panel output to display */ -#define MFB_TYPE_OFF 1 /* Panel off */ -#define MFB_TYPE_WB 2 /* Panel written back to memory */ -#define MFB_TYPE_TEST 3 /* Panel generate color bar */ #endif /* __KERNEL__ */ #endif /* __FSL_DIU_FB_H__ */ diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 02fa4697a0e5..6957350e122f 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -21,6 +21,8 @@ #define dev_to_part(device) container_of((device), struct hd_struct, __dev) #define disk_to_dev(disk) (&(disk)->part0.__dev) #define part_to_dev(part) (&((part)->__dev)) +#define alias_name(disk) ((disk)->alias ? (disk)->alias : \ + (disk)->disk_name) extern struct device_type part_type; extern struct kobject *block_depr; @@ -58,6 +60,7 @@ enum { #define DISK_MAX_PARTS 256 #define DISK_NAME_LEN 32 +#define ALIAS_LEN 256 #include <linux/major.h> #include <linux/device.h> @@ -162,6 +165,7 @@ struct gendisk { * disks that can't be partitioned. */ char disk_name[DISK_NAME_LEN]; /* name of major driver */ + char *alias; /* alias name of disk */ char *(*devnode)(struct gendisk *gd, mode_t *mode); unsigned int events; /* supported events */ diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 17b5a0d80e42..38ac48b7d3a8 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -14,6 +14,18 @@ #define GPIOF_OUT_INIT_LOW (GPIOF_DIR_OUT | GPIOF_INIT_LOW) #define GPIOF_OUT_INIT_HIGH (GPIOF_DIR_OUT | GPIOF_INIT_HIGH) +/** + * struct gpio - a structure describing a GPIO with configuration + * @gpio: the GPIO number + * @flags: GPIO configuration as specified by GPIOF_* + * @label: a literal description string of this GPIO + */ +struct gpio { + unsigned gpio; + unsigned long flags; + const char *label; +}; + #ifdef CONFIG_GENERIC_GPIO #include <asm/gpio.h> @@ -24,18 +36,8 @@ #include <linux/errno.h> struct device; -struct gpio; struct gpio_chip; -/* - * Some platforms don't support the GPIO programming interface. - * - * In case some driver uses it anyway (it should normally have - * depended on GENERIC_GPIO), these routines help the compiler - * optimize out much GPIO-related code ... or trigger a runtime - * warning when something is wrongly called. - */ - static inline bool gpio_is_valid(int number) { return false; diff --git a/include/linux/hid.h b/include/linux/hid.h index 9cf8e7ae7450..deed5f9a1e1c 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -71,6 +71,7 @@ #include <linux/timer.h> #include <linux/workqueue.h> #include <linux/input.h> +#include <linux/semaphore.h> /* * We parse each description item into this structure. Short items data @@ -312,6 +313,7 @@ struct hid_item { #define HID_QUIRK_BADPAD 0x00000020 #define HID_QUIRK_MULTI_INPUT 0x00000040 #define HID_QUIRK_HIDINPUT_FORCE 0x00000080 +#define HID_QUIRK_MULTITOUCH 0x00000100 #define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000 #define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000 #define HID_QUIRK_NO_INIT_REPORTS 0x20000000 @@ -475,6 +477,7 @@ struct hid_device { /* device report descriptor */ unsigned country; /* HID country */ struct hid_report_enum report_enum[HID_REPORT_TYPES]; + struct semaphore driver_lock; /* protects the current driver */ struct device dev; /* device */ struct hid_driver *driver; struct hid_ll_driver *ll_driver; diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h new file mode 100644 index 000000000000..12ec328481de --- /dev/null +++ b/include/linux/hyperv.h @@ -0,0 +1,873 @@ +/* + * + * Copyright (c) 2011, Microsoft Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place - Suite 330, Boston, MA 02111-1307 USA. + * + * Authors: + * Haiyang Zhang <haiyangz@microsoft.com> + * Hank Janssen <hjanssen@microsoft.com> + * K. Y. Srinivasan <kys@microsoft.com> + * + */ + +#ifndef _HYPERV_H +#define _HYPERV_H + +#include <linux/scatterlist.h> +#include <linux/list.h> +#include <linux/uuid.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/mod_devicetable.h> + + +#define MAX_PAGE_BUFFER_COUNT 16 +#define MAX_MULTIPAGE_BUFFER_COUNT 32 /* 128K */ + +#pragma pack(push, 1) + +/* Single-page buffer */ +struct hv_page_buffer { + u32 len; + u32 offset; + u64 pfn; +}; + +/* Multiple-page buffer */ +struct hv_multipage_buffer { + /* Length and Offset determines the # of pfns in the array */ + u32 len; + u32 offset; + u64 pfn_array[MAX_MULTIPAGE_BUFFER_COUNT]; +}; + +/* 0x18 includes the proprietary packet header */ +#define MAX_PAGE_BUFFER_PACKET (0x18 + \ + (sizeof(struct hv_page_buffer) * \ + MAX_PAGE_BUFFER_COUNT)) +#define MAX_MULTIPAGE_BUFFER_PACKET (0x18 + \ + sizeof(struct hv_multipage_buffer)) + + +#pragma pack(pop) + +struct hv_ring_buffer { + /* Offset in bytes from the start of ring data below */ + u32 write_index; + + /* Offset in bytes from the start of ring data below */ + u32 read_index; + + u32 interrupt_mask; + + /* Pad it to PAGE_SIZE so that data starts on page boundary */ + u8 reserved[4084]; + + /* NOTE: + * The interrupt_mask field is used only for channels but since our + * vmbus connection also uses this data structure and its data starts + * here, we commented out this field. + */ + + /* + * Ring data starts here + RingDataStartOffset + * !!! DO NOT place any fields below this !!! + */ + u8 buffer[0]; +} __packed; + +struct hv_ring_buffer_info { + struct hv_ring_buffer *ring_buffer; + u32 ring_size; /* Include the shared header */ + spinlock_t ring_lock; + + u32 ring_datasize; /* < ring_size */ + u32 ring_data_startoffset; +}; + +struct hv_ring_buffer_debug_info { + u32 current_interrupt_mask; + u32 current_read_index; + u32 current_write_index; + u32 bytes_avail_toread; + u32 bytes_avail_towrite; +}; + +/* + * We use the same version numbering for all Hyper-V modules. + * + * Definition of versioning is as follows; + * + * Major Number Changes for these scenarios; + * 1. When a new version of Windows Hyper-V + * is released. + * 2. A Major change has occurred in the + * Linux IC's. + * (For example the merge for the first time + * into the kernel) Every time the Major Number + * changes, the Revision number is reset to 0. + * Minor Number Changes when new functionality is added + * to the Linux IC's that is not a bug fix. + * + * 3.1 - Added completed hv_utils driver. Shutdown/Heartbeat/Timesync + */ +#define HV_DRV_VERSION "3.1" + + +/* + * A revision number of vmbus that is used for ensuring both ends on a + * partition are using compatible versions. + */ +#define VMBUS_REVISION_NUMBER 13 + +/* Make maximum size of pipe payload of 16K */ +#define MAX_PIPE_DATA_PAYLOAD (sizeof(u8) * 16384) + +/* Define PipeMode values. */ +#define VMBUS_PIPE_TYPE_BYTE 0x00000000 +#define VMBUS_PIPE_TYPE_MESSAGE 0x00000004 + +/* The size of the user defined data buffer for non-pipe offers. */ +#define MAX_USER_DEFINED_BYTES 120 + +/* The size of the user defined data buffer for pipe offers. */ +#define MAX_PIPE_USER_DEFINED_BYTES 116 + +/* + * At the center of the Channel Management library is the Channel Offer. This + * struct contains the fundamental information about an offer. + */ +struct vmbus_channel_offer { + uuid_le if_type; + uuid_le if_instance; + u64 int_latency; /* in 100ns units */ + u32 if_revision; + u32 server_ctx_size; /* in bytes */ + u16 chn_flags; + u16 mmio_megabytes; /* in bytes * 1024 * 1024 */ + + union { + /* Non-pipes: The user has MAX_USER_DEFINED_BYTES bytes. */ + struct { + unsigned char user_def[MAX_USER_DEFINED_BYTES]; + } std; + + /* + * Pipes: + * The following sructure is an integrated pipe protocol, which + * is implemented on top of standard user-defined data. Pipe + * clients have MAX_PIPE_USER_DEFINED_BYTES left for their own + * use. + */ + struct { + u32 pipe_mode; + unsigned char user_def[MAX_PIPE_USER_DEFINED_BYTES]; + } pipe; + } u; + u32 padding; +} __packed; + +/* Server Flags */ +#define VMBUS_CHANNEL_ENUMERATE_DEVICE_INTERFACE 1 +#define VMBUS_CHANNEL_SERVER_SUPPORTS_TRANSFER_PAGES 2 +#define VMBUS_CHANNEL_SERVER_SUPPORTS_GPADLS 4 +#define VMBUS_CHANNEL_NAMED_PIPE_MODE 0x10 +#define VMBUS_CHANNEL_LOOPBACK_OFFER 0x100 +#define VMBUS_CHANNEL_PARENT_OFFER 0x200 +#define VMBUS_CHANNEL_REQUEST_MONITORED_NOTIFICATION 0x400 + +struct vmpacket_descriptor { + u16 type; + u16 offset8; + u16 len8; + u16 flags; + u64 trans_id; +} __packed; + +struct vmpacket_header { + u32 prev_pkt_start_offset; + struct vmpacket_descriptor descriptor; +} __packed; + +struct vmtransfer_page_range { + u32 byte_count; + u32 byte_offset; +} __packed; + +struct vmtransfer_page_packet_header { + struct vmpacket_descriptor d; + u16 xfer_pageset_id; + bool sender_owns_set; + u8 reserved; + u32 range_cnt; + struct vmtransfer_page_range ranges[1]; +} __packed; + +struct vmgpadl_packet_header { + struct vmpacket_descriptor d; + u32 gpadl; + u32 reserved; +} __packed; + +struct vmadd_remove_transfer_page_set { + struct vmpacket_descriptor d; + u32 gpadl; + u16 xfer_pageset_id; + u16 reserved; +} __packed; + +/* + * This structure defines a range in guest physical space that can be made to + * look virtually contiguous. + */ +struct gpa_range { + u32 byte_count; + u32 byte_offset; + u64 pfn_array[0]; +}; + +/* + * This is the format for an Establish Gpadl packet, which contains a handle by + * which this GPADL will be known and a set of GPA ranges associated with it. + * This can be converted to a MDL by the guest OS. If there are multiple GPA + * ranges, then the resulting MDL will be "chained," representing multiple VA + * ranges. + */ +struct vmestablish_gpadl { + struct vmpacket_descriptor d; + u32 gpadl; + u32 range_cnt; + struct gpa_range range[1]; +} __packed; + +/* + * This is the format for a Teardown Gpadl packet, which indicates that the + * GPADL handle in the Establish Gpadl packet will never be referenced again. + */ +struct vmteardown_gpadl { + struct vmpacket_descriptor d; + u32 gpadl; + u32 reserved; /* for alignment to a 8-byte boundary */ +} __packed; + +/* + * This is the format for a GPA-Direct packet, which contains a set of GPA + * ranges, in addition to commands and/or data. + */ +struct vmdata_gpa_direct { + struct vmpacket_descriptor d; + u32 reserved; + u32 range_cnt; + struct gpa_range range[1]; +} __packed; + +/* This is the format for a Additional Data Packet. */ +struct vmadditional_data { + struct vmpacket_descriptor d; + u64 total_bytes; + u32 offset; + u32 byte_cnt; + unsigned char data[1]; +} __packed; + +union vmpacket_largest_possible_header { + struct vmpacket_descriptor simple_hdr; + struct vmtransfer_page_packet_header xfer_page_hdr; + struct vmgpadl_packet_header gpadl_hdr; + struct vmadd_remove_transfer_page_set add_rm_xfer_page_hdr; + struct vmestablish_gpadl establish_gpadl_hdr; + struct vmteardown_gpadl teardown_gpadl_hdr; + struct vmdata_gpa_direct data_gpa_direct_hdr; +}; + +#define VMPACKET_DATA_START_ADDRESS(__packet) \ + (void *)(((unsigned char *)__packet) + \ + ((struct vmpacket_descriptor)__packet)->offset8 * 8) + +#define VMPACKET_DATA_LENGTH(__packet) \ + ((((struct vmpacket_descriptor)__packet)->len8 - \ + ((struct vmpacket_descriptor)__packet)->offset8) * 8) + +#define VMPACKET_TRANSFER_MODE(__packet) \ + (((struct IMPACT)__packet)->type) + +enum vmbus_packet_type { + VM_PKT_INVALID = 0x0, + VM_PKT_SYNCH = 0x1, + VM_PKT_ADD_XFER_PAGESET = 0x2, + VM_PKT_RM_XFER_PAGESET = 0x3, + VM_PKT_ESTABLISH_GPADL = 0x4, + VM_PKT_TEARDOWN_GPADL = 0x5, + VM_PKT_DATA_INBAND = 0x6, + VM_PKT_DATA_USING_XFER_PAGES = 0x7, + VM_PKT_DATA_USING_GPADL = 0x8, + VM_PKT_DATA_USING_GPA_DIRECT = 0x9, + VM_PKT_CANCEL_REQUEST = 0xa, + VM_PKT_COMP = 0xb, + VM_PKT_DATA_USING_ADDITIONAL_PKT = 0xc, + VM_PKT_ADDITIONAL_DATA = 0xd +}; + +#define VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED 1 + + +/* Version 1 messages */ +enum vmbus_channel_message_type { + CHANNELMSG_INVALID = 0, + CHANNELMSG_OFFERCHANNEL = 1, + CHANNELMSG_RESCIND_CHANNELOFFER = 2, + CHANNELMSG_REQUESTOFFERS = 3, + CHANNELMSG_ALLOFFERS_DELIVERED = 4, + CHANNELMSG_OPENCHANNEL = 5, + CHANNELMSG_OPENCHANNEL_RESULT = 6, + CHANNELMSG_CLOSECHANNEL = 7, + CHANNELMSG_GPADL_HEADER = 8, + CHANNELMSG_GPADL_BODY = 9, + CHANNELMSG_GPADL_CREATED = 10, + CHANNELMSG_GPADL_TEARDOWN = 11, + CHANNELMSG_GPADL_TORNDOWN = 12, + CHANNELMSG_RELID_RELEASED = 13, + CHANNELMSG_INITIATE_CONTACT = 14, + CHANNELMSG_VERSION_RESPONSE = 15, + CHANNELMSG_UNLOAD = 16, +#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD + CHANNELMSG_VIEWRANGE_ADD = 17, + CHANNELMSG_VIEWRANGE_REMOVE = 18, +#endif + CHANNELMSG_COUNT +}; + +struct vmbus_channel_message_header { + enum vmbus_channel_message_type msgtype; + u32 padding; +} __packed; + +/* Query VMBus Version parameters */ +struct vmbus_channel_query_vmbus_version { + struct vmbus_channel_message_header header; + u32 version; +} __packed; + +/* VMBus Version Supported parameters */ +struct vmbus_channel_version_supported { + struct vmbus_channel_message_header header; + bool version_supported; +} __packed; + +/* Offer Channel parameters */ +struct vmbus_channel_offer_channel { + struct vmbus_channel_message_header header; + struct vmbus_channel_offer offer; + u32 child_relid; + u8 monitorid; + bool monitor_allocated; +} __packed; + +/* Rescind Offer parameters */ +struct vmbus_channel_rescind_offer { + struct vmbus_channel_message_header header; + u32 child_relid; +} __packed; + +/* + * Request Offer -- no parameters, SynIC message contains the partition ID + * Set Snoop -- no parameters, SynIC message contains the partition ID + * Clear Snoop -- no parameters, SynIC message contains the partition ID + * All Offers Delivered -- no parameters, SynIC message contains the partition + * ID + * Flush Client -- no parameters, SynIC message contains the partition ID + */ + +/* Open Channel parameters */ +struct vmbus_channel_open_channel { + struct vmbus_channel_message_header header; + + /* Identifies the specific VMBus channel that is being opened. */ + u32 child_relid; + + /* ID making a particular open request at a channel offer unique. */ + u32 openid; + + /* GPADL for the channel's ring buffer. */ + u32 ringbuffer_gpadlhandle; + + /* GPADL for the channel's server context save area. */ + u32 server_contextarea_gpadlhandle; + + /* + * The upstream ring buffer begins at offset zero in the memory + * described by RingBufferGpadlHandle. The downstream ring buffer + * follows it at this offset (in pages). + */ + u32 downstream_ringbuffer_pageoffset; + + /* User-specific data to be passed along to the server endpoint. */ + unsigned char userdata[MAX_USER_DEFINED_BYTES]; +} __packed; + +/* Open Channel Result parameters */ +struct vmbus_channel_open_result { + struct vmbus_channel_message_header header; + u32 child_relid; + u32 openid; + u32 status; +} __packed; + +/* Close channel parameters; */ +struct vmbus_channel_close_channel { + struct vmbus_channel_message_header header; + u32 child_relid; +} __packed; + +/* Channel Message GPADL */ +#define GPADL_TYPE_RING_BUFFER 1 +#define GPADL_TYPE_SERVER_SAVE_AREA 2 +#define GPADL_TYPE_TRANSACTION 8 + +/* + * The number of PFNs in a GPADL message is defined by the number of + * pages that would be spanned by ByteCount and ByteOffset. If the + * implied number of PFNs won't fit in this packet, there will be a + * follow-up packet that contains more. + */ +struct vmbus_channel_gpadl_header { + struct vmbus_channel_message_header header; + u32 child_relid; + u32 gpadl; + u16 range_buflen; + u16 rangecount; + struct gpa_range range[0]; +} __packed; + +/* This is the followup packet that contains more PFNs. */ +struct vmbus_channel_gpadl_body { + struct vmbus_channel_message_header header; + u32 msgnumber; + u32 gpadl; + u64 pfn[0]; +} __packed; + +struct vmbus_channel_gpadl_created { + struct vmbus_channel_message_header header; + u32 child_relid; + u32 gpadl; + u32 creation_status; +} __packed; + +struct vmbus_channel_gpadl_teardown { + struct vmbus_channel_message_header header; + u32 child_relid; + u32 gpadl; +} __packed; + +struct vmbus_channel_gpadl_torndown { + struct vmbus_channel_message_header header; + u32 gpadl; +} __packed; + +#ifdef VMBUS_FEATURE_PARENT_OR_PEER_MEMORY_MAPPED_INTO_A_CHILD +struct vmbus_channel_view_range_add { + struct vmbus_channel_message_header header; + PHYSICAL_ADDRESS viewrange_base; + u64 viewrange_length; + u32 child_relid; +} __packed; + +struct vmbus_channel_view_range_remove { + struct vmbus_channel_message_header header; + PHYSICAL_ADDRESS viewrange_base; + u32 child_relid; +} __packed; +#endif + +struct vmbus_channel_relid_released { + struct vmbus_channel_message_header header; + u32 child_relid; +} __packed; + +struct vmbus_channel_initiate_contact { + struct vmbus_channel_message_header header; + u32 vmbus_version_requested; + u32 padding2; + u64 interrupt_page; + u64 monitor_page1; + u64 monitor_page2; +} __packed; + +struct vmbus_channel_version_response { + struct vmbus_channel_message_header header; + bool version_supported; +} __packed; + +enum vmbus_channel_state { + CHANNEL_OFFER_STATE, + CHANNEL_OPENING_STATE, + CHANNEL_OPEN_STATE, +}; + +struct vmbus_channel_debug_info { + u32 relid; + enum vmbus_channel_state state; + uuid_le interfacetype; + uuid_le interface_instance; + u32 monitorid; + u32 servermonitor_pending; + u32 servermonitor_latency; + u32 servermonitor_connectionid; + u32 clientmonitor_pending; + u32 clientmonitor_latency; + u32 clientmonitor_connectionid; + + struct hv_ring_buffer_debug_info inbound; + struct hv_ring_buffer_debug_info outbound; +}; + +/* + * Represents each channel msg on the vmbus connection This is a + * variable-size data structure depending on the msg type itself + */ +struct vmbus_channel_msginfo { + /* Bookkeeping stuff */ + struct list_head msglistentry; + + /* So far, this is only used to handle gpadl body message */ + struct list_head submsglist; + + /* Synchronize the request/response if needed */ + struct completion waitevent; + union { + struct vmbus_channel_version_supported version_supported; + struct vmbus_channel_open_result open_result; + struct vmbus_channel_gpadl_torndown gpadl_torndown; + struct vmbus_channel_gpadl_created gpadl_created; + struct vmbus_channel_version_response version_response; + } response; + + u32 msgsize; + /* + * The channel message that goes out on the "wire". + * It will contain at minimum the VMBUS_CHANNEL_MESSAGE_HEADER header + */ + unsigned char msg[0]; +}; + +struct vmbus_close_msg { + struct vmbus_channel_msginfo info; + struct vmbus_channel_close_channel msg; +}; + +struct vmbus_channel { + struct list_head listentry; + + struct hv_device *device_obj; + + struct work_struct work; + + enum vmbus_channel_state state; + + struct vmbus_channel_offer_channel offermsg; + /* + * These are based on the OfferMsg.MonitorId. + * Save it here for easy access. + */ + u8 monitor_grp; + u8 monitor_bit; + + u32 ringbuffer_gpadlhandle; + + /* Allocated memory for ring buffer */ + void *ringbuffer_pages; + u32 ringbuffer_pagecount; + struct hv_ring_buffer_info outbound; /* send to parent */ + struct hv_ring_buffer_info inbound; /* receive from parent */ + spinlock_t inbound_lock; + struct workqueue_struct *controlwq; + + struct vmbus_close_msg close_msg; + + /* Channel callback are invoked in this workqueue context */ + /* HANDLE dataWorkQueue; */ + + void (*onchannel_callback)(void *context); + void *channel_callback_context; +}; + +void vmbus_onmessage(void *context); + +int vmbus_request_offers(void); + +/* The format must be the same as struct vmdata_gpa_direct */ +struct vmbus_channel_packet_page_buffer { + u16 type; + u16 dataoffset8; + u16 length8; + u16 flags; + u64 transactionid; + u32 reserved; + u32 rangecount; + struct hv_page_buffer range[MAX_PAGE_BUFFER_COUNT]; +} __packed; + +/* The format must be the same as struct vmdata_gpa_direct */ +struct vmbus_channel_packet_multipage_buffer { + u16 type; + u16 dataoffset8; + u16 length8; + u16 flags; + u64 transactionid; + u32 reserved; + u32 rangecount; /* Always 1 in this case */ + struct hv_multipage_buffer range; +} __packed; + + +extern int vmbus_open(struct vmbus_channel *channel, + u32 send_ringbuffersize, + u32 recv_ringbuffersize, + void *userdata, + u32 userdatalen, + void(*onchannel_callback)(void *context), + void *context); + +extern void vmbus_close(struct vmbus_channel *channel); + +extern int vmbus_sendpacket(struct vmbus_channel *channel, + const void *buffer, + u32 bufferLen, + u64 requestid, + enum vmbus_packet_type type, + u32 flags); + +extern int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel, + struct hv_page_buffer pagebuffers[], + u32 pagecount, + void *buffer, + u32 bufferlen, + u64 requestid); + +extern int vmbus_sendpacket_multipagebuffer(struct vmbus_channel *channel, + struct hv_multipage_buffer *mpb, + void *buffer, + u32 bufferlen, + u64 requestid); + +extern int vmbus_establish_gpadl(struct vmbus_channel *channel, + void *kbuffer, + u32 size, + u32 *gpadl_handle); + +extern int vmbus_teardown_gpadl(struct vmbus_channel *channel, + u32 gpadl_handle); + +extern int vmbus_recvpacket(struct vmbus_channel *channel, + void *buffer, + u32 bufferlen, + u32 *buffer_actual_len, + u64 *requestid); + +extern int vmbus_recvpacket_raw(struct vmbus_channel *channel, + void *buffer, + u32 bufferlen, + u32 *buffer_actual_len, + u64 *requestid); + + +extern void vmbus_get_debug_info(struct vmbus_channel *channel, + struct vmbus_channel_debug_info *debug); + +extern void vmbus_ontimer(unsigned long data); + +struct hv_dev_port_info { + u32 int_mask; + u32 read_idx; + u32 write_idx; + u32 bytes_avail_toread; + u32 bytes_avail_towrite; +}; + +/* Base driver object */ +struct hv_driver { + const char *name; + + /* the device type supported by this driver */ + uuid_le dev_type; + const struct hv_vmbus_device_id *id_table; + + struct device_driver driver; + + int (*probe)(struct hv_device *, const struct hv_vmbus_device_id *); + int (*remove)(struct hv_device *); + void (*shutdown)(struct hv_device *); + +}; + +/* Base device object */ +struct hv_device { + /* the device type id of this device */ + uuid_le dev_type; + + /* the device instance id of this device */ + uuid_le dev_instance; + + struct device device; + + struct vmbus_channel *channel; +}; + + +static inline struct hv_device *device_to_hv_device(struct device *d) +{ + return container_of(d, struct hv_device, device); +} + +static inline struct hv_driver *drv_to_hv_drv(struct device_driver *d) +{ + return container_of(d, struct hv_driver, driver); +} + +static inline void hv_set_drvdata(struct hv_device *dev, void *data) +{ + dev_set_drvdata(&dev->device, data); +} + +static inline void *hv_get_drvdata(struct hv_device *dev) +{ + return dev_get_drvdata(&dev->device); +} + +/* Vmbus interface */ +#define vmbus_driver_register(driver) \ + __vmbus_driver_register(driver, THIS_MODULE, KBUILD_MODNAME) +int __must_check __vmbus_driver_register(struct hv_driver *hv_driver, + struct module *owner, + const char *mod_name); +void vmbus_driver_unregister(struct hv_driver *hv_driver); + +/** + * VMBUS_DEVICE - macro used to describe a specific hyperv vmbus device + * + * This macro is used to create a struct hv_vmbus_device_id that matches a + * specific device. + */ +#define VMBUS_DEVICE(g0, g1, g2, g3, g4, g5, g6, g7, \ + g8, g9, ga, gb, gc, gd, ge, gf) \ + .guid = { g0, g1, g2, g3, g4, g5, g6, g7, \ + g8, g9, ga, gb, gc, gd, ge, gf }, + +/* + * Common header for Hyper-V ICs + */ + +#define ICMSGTYPE_NEGOTIATE 0 +#define ICMSGTYPE_HEARTBEAT 1 +#define ICMSGTYPE_KVPEXCHANGE 2 +#define ICMSGTYPE_SHUTDOWN 3 +#define ICMSGTYPE_TIMESYNC 4 +#define ICMSGTYPE_VSS 5 + +#define ICMSGHDRFLAG_TRANSACTION 1 +#define ICMSGHDRFLAG_REQUEST 2 +#define ICMSGHDRFLAG_RESPONSE 4 + +#define HV_S_OK 0x00000000 +#define HV_E_FAIL 0x80004005 +#define HV_ERROR_NOT_SUPPORTED 0x80070032 +#define HV_ERROR_MACHINE_LOCKED 0x800704F7 + +/* + * While we want to handle util services as regular devices, + * there is only one instance of each of these services; so + * we statically allocate the service specific state. + */ + +struct hv_util_service { + u8 *recv_buffer; + void (*util_cb)(void *); + int (*util_init)(struct hv_util_service *); + void (*util_deinit)(void); +}; + +struct vmbuspipe_hdr { + u32 flags; + u32 msgsize; +} __packed; + +struct ic_version { + u16 major; + u16 minor; +} __packed; + +struct icmsg_hdr { + struct ic_version icverframe; + u16 icmsgtype; + struct ic_version icvermsg; + u16 icmsgsize; + u32 status; + u8 ictransaction_id; + u8 icflags; + u8 reserved[2]; +} __packed; + +struct icmsg_negotiate { + u16 icframe_vercnt; + u16 icmsg_vercnt; + u32 reserved; + struct ic_version icversion_data[1]; /* any size array */ +} __packed; + +struct shutdown_msg_data { + u32 reason_code; + u32 timeout_seconds; + u32 flags; + u8 display_message[2048]; +} __packed; + +struct heartbeat_msg_data { + u64 seq_num; + u32 reserved[8]; +} __packed; + +/* Time Sync IC defs */ +#define ICTIMESYNCFLAG_PROBE 0 +#define ICTIMESYNCFLAG_SYNC 1 +#define ICTIMESYNCFLAG_SAMPLE 2 + +#ifdef __x86_64__ +#define WLTIMEDELTA 116444736000000000L /* in 100ns unit */ +#else +#define WLTIMEDELTA 116444736000000000LL +#endif + +struct ictimesync_data { + u64 parenttime; + u64 childtime; + u64 roundtriptime; + u8 flags; +} __packed; + +struct hyperv_service_callback { + u8 msg_type; + char *log_msg; + uuid_le data; + struct vmbus_channel *channel; + void (*callback) (void *context); +}; + +extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *, + struct icmsg_negotiate *, u8 *); + +#endif /* _HYPERV_H */ diff --git a/include/linux/i2c/tsc2007.h b/include/linux/i2c/tsc2007.h index 591427a63b06..506a9f7af51e 100644 --- a/include/linux/i2c/tsc2007.h +++ b/include/linux/i2c/tsc2007.h @@ -5,7 +5,7 @@ struct tsc2007_platform_data { u16 model; /* 2007. */ - u16 x_plate_ohms; + u16 x_plate_ohms; /* must be non-zero value */ u16 max_rt; /* max. resistance above which samples are ignored */ unsigned long poll_delay; /* delay (in ms) after pen-down event before polling starts */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 54c878960872..48363c3c40f8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -130,6 +130,8 @@ #define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060 /* A-MSDU 802.11n */ #define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080 +/* Mesh Control 802.11s */ +#define IEEE80211_QOS_CTL_MESH_CONTROL_PRESENT 0x0100 /* U-APSD queue for WMM IEs sent by AP */ #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7) @@ -629,9 +631,14 @@ struct ieee80211_rann_ie { u8 rann_ttl; u8 rann_addr[6]; u32 rann_seq; + u32 rann_interval; u32 rann_metric; } __attribute__ ((packed)); +enum ieee80211_rann_flags { + RANN_FLAG_IS_GATE = 1 << 0, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -736,19 +743,10 @@ struct ieee80211_mgmt { __le16 params; __le16 reason_code; } __attribute__((packed)) delba; - struct{ + struct { u8 action_code; - /* capab_info for open and confirm, - * reason for close - */ - __le16 aux; - /* Followed in plink_confirm by status - * code, AID and supported rates, - * and directly by supported rates in - * plink_open and plink_close - */ u8 variable[0]; - } __attribute__((packed)) plink_action; + } __attribute__((packed)) self_prot; struct{ u8 action_code; u8 variable[0]; @@ -761,6 +759,12 @@ struct ieee80211_mgmt { u8 action; u8 smps_control; } __attribute__ ((packed)) ht_smps; + struct { + u8 action_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed tdls_discover_resp; } u; } __attribute__ ((packed)) action; } u; @@ -779,6 +783,13 @@ struct ieee80211_mmie { u8 mic[8]; } __attribute__ ((packed)); +struct ieee80211_vendor_ie { + u8 element_id; + u8 len; + u8 oui[3]; + u8 oui_type; +} __packed; + /* Control frames */ struct ieee80211_rts { __le16 frame_control; @@ -800,6 +811,52 @@ struct ieee80211_pspoll { u8 ta[6]; } __attribute__ ((packed)); +/* TDLS */ + +/* Link-id information element */ +struct ieee80211_tdls_lnkie { + u8 ie_type; /* Link Identifier IE */ + u8 ie_len; + u8 bssid[6]; + u8 init_sta[6]; + u8 resp_sta[6]; +} __packed; + +struct ieee80211_tdls_data { + u8 da[6]; + u8 sa[6]; + __be16 ether_type; + u8 payload_type; + u8 category; + u8 action_code; + union { + struct { + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_req; + struct { + __le16 status_code; + u8 dialog_token; + __le16 capability; + u8 variable[0]; + } __packed setup_resp; + struct { + __le16 status_code; + u8 dialog_token; + u8 variable[0]; + } __packed setup_cfm; + struct { + __le16 reason_code; + u8 variable[0]; + } __packed teardown; + struct { + u8 dialog_token; + u8 variable[0]; + } __packed discover_req; + } u; +} __packed; + /** * struct ieee80211_bar - HT Block Ack Request * @@ -816,9 +873,11 @@ struct ieee80211_bar { } __attribute__((packed)); /* 802.11 BAR control masks */ -#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 -#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 - +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 #define IEEE80211_HT_MCS_MASK_LEN 10 @@ -1189,16 +1248,13 @@ enum ieee80211_eid { WLAN_EID_TS_DELAY = 43, WLAN_EID_TCLAS_PROCESSING = 44, WLAN_EID_QOS_CAPA = 46, + /* 802.11z */ + WLAN_EID_LINK_ID = 101, /* 802.11s */ WLAN_EID_MESH_CONFIG = 113, WLAN_EID_MESH_ID = 114, WLAN_EID_LINK_METRIC_REPORT = 115, WLAN_EID_CONGESTION_NOTIFICATION = 116, - /* Note that the Peer Link IE has been replaced with the similar - * Peer Management IE. We will keep the former definition until mesh - * code is changed to comply with latest 802.11s drafts. - */ - WLAN_EID_PEER_LINK = 55, /* no longer in 802.11s drafts */ WLAN_EID_PEER_MGMT = 117, WLAN_EID_CHAN_SWITCH_PARAM = 118, WLAN_EID_MESH_AWAKE_WINDOW = 119, @@ -1277,13 +1333,11 @@ enum ieee80211_category { WLAN_CATEGORY_HT = 7, WLAN_CATEGORY_SA_QUERY = 8, WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, + WLAN_CATEGORY_TDLS = 12, WLAN_CATEGORY_MESH_ACTION = 13, WLAN_CATEGORY_MULTIHOP_ACTION = 14, WLAN_CATEGORY_SELF_PROTECTED = 15, WLAN_CATEGORY_WMM = 17, - /* TODO: remove MESH_PATH_SEL after mesh is updated - * to current 802.11s draft */ - WLAN_CATEGORY_MESH_PATH_SEL = 32, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1309,6 +1363,31 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* Self Protected Action codes */ +enum ieee80211_self_protected_actioncode { + WLAN_SP_RESERVED = 0, + WLAN_SP_MESH_PEERING_OPEN = 1, + WLAN_SP_MESH_PEERING_CONFIRM = 2, + WLAN_SP_MESH_PEERING_CLOSE = 3, + WLAN_SP_MGK_INFORM = 4, + WLAN_SP_MGK_ACK = 5, +}; + +/* Mesh action codes */ +enum ieee80211_mesh_actioncode { + WLAN_MESH_ACTION_LINK_METRIC_REPORT, + WLAN_MESH_ACTION_HWMP_PATH_SELECTION, + WLAN_MESH_ACTION_GATE_ANNOUNCEMENT, + WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION, + WLAN_MESH_ACTION_MCCA_SETUP_REQUEST, + WLAN_MESH_ACTION_MCCA_SETUP_REPLY, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT, + WLAN_MESH_ACTION_MCCA_TEARDOWN, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE, +}; + /* Security key length */ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, @@ -1318,6 +1397,36 @@ enum ieee80211_key_len { WLAN_KEY_LEN_AES_CMAC = 16, }; +/* Public action codes */ +enum ieee80211_pub_actioncode { + WLAN_PUB_ACTION_TDLS_DISCOVER_RES = 14, +}; + +/* TDLS action codes */ +enum ieee80211_tdls_actioncode { + WLAN_TDLS_SETUP_REQUEST = 0, + WLAN_TDLS_SETUP_RESPONSE = 1, + WLAN_TDLS_SETUP_CONFIRM = 2, + WLAN_TDLS_TEARDOWN = 3, + WLAN_TDLS_PEER_TRAFFIC_INDICATION = 4, + WLAN_TDLS_CHANNEL_SWITCH_REQUEST = 5, + WLAN_TDLS_CHANNEL_SWITCH_RESPONSE = 6, + WLAN_TDLS_PEER_PSM_REQUEST = 7, + WLAN_TDLS_PEER_PSM_RESPONSE = 8, + WLAN_TDLS_PEER_TRAFFIC_RESPONSE = 9, + WLAN_TDLS_DISCOVERY_REQUEST = 10, +}; + +/* + * TDLS capabililites to be enabled in the 5th byte of the + * @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) +#define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) + +/* TDLS specific payload type in the LLC/SNAP header */ +#define WLAN_TDLS_SNAP_RFTYPE 0x2 + /** * enum - mesh path selection protocol identifier * @@ -1453,6 +1562,9 @@ enum ieee80211_sa_query_action { #define WLAN_PMKID_LEN 16 +#define WLAN_OUI_WFA 0x506f9a +#define WLAN_OUI_TYPE_WFA_P2P 9 + /* * WMM/802.11e Tspec Element */ diff --git a/include/linux/if.h b/include/linux/if.h index 03489ca92ded..db20bd4fd16b 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -78,6 +78,7 @@ * datapath port */ #define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing * skbs on transmit */ +#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index a3d99ff6e3b5..e473003e4bda 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -83,11 +83,13 @@ #define ETH_P_8021AH 0x88E7 /* 802.1ah Backbone Service Tag */ #define ETH_P_1588 0x88F7 /* IEEE 1588 Timesync */ #define ETH_P_FCOE 0x8906 /* Fibre Channel over Ethernet */ +#define ETH_P_TDLS 0x890D /* TDLS */ #define ETH_P_FIP 0x8914 /* FCoE Initialization Protocol */ #define ETH_P_QINQ1 0x9100 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ /* * Non DIX types. Won't clash for 1500 types. diff --git a/include/linux/if_link.h b/include/linux/if_link.h index 0ee969a5593d..c52d4b5f872a 100644 --- a/include/linux/if_link.h +++ b/include/linux/if_link.h @@ -279,6 +279,7 @@ enum { IFLA_VF_MAC, /* Hardware queue specific attributes */ IFLA_VF_VLAN, IFLA_VF_TX_RATE, /* TX Bandwidth Allocation */ + IFLA_VF_SPOOFCHK, /* Spoof Checking on/off switch */ __IFLA_VF_MAX, }; @@ -300,13 +301,22 @@ struct ifla_vf_tx_rate { __u32 rate; /* Max TX bandwidth in Mbps, 0 disables throttling */ }; +struct ifla_vf_spoofchk { + __u32 vf; + __u32 setting; +}; +#ifdef __KERNEL__ + +/* We don't want this structure exposed to user space */ struct ifla_vf_info { __u32 vf; __u8 mac[32]; __u32 vlan; __u32 qos; __u32 tx_rate; + __u32 spoofchk; }; +#endif /* VF ports management section * diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h index e28b2e4959d4..d103dca5c563 100644 --- a/include/linux/if_macvlan.h +++ b/include/linux/if_macvlan.h @@ -64,6 +64,7 @@ struct macvlan_dev { int (*forward)(struct net_device *dev, struct sk_buff *skb); struct macvtap_queue *taps[MAX_MACVTAP_QUEUES]; int numvtaps; + int minor; }; static inline void macvlan_count_rx(const struct macvlan_dev *vlan, diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h index c1486060f5ed..f3799295d231 100644 --- a/include/linux/if_packet.h +++ b/include/linux/if_packet.h @@ -61,6 +61,17 @@ struct tpacket_stats { unsigned int tp_drops; }; +struct tpacket_stats_v3 { + unsigned int tp_packets; + unsigned int tp_drops; + unsigned int tp_freeze_q_cnt; +}; + +union tpacket_stats_u { + struct tpacket_stats stats1; + struct tpacket_stats_v3 stats3; +}; + struct tpacket_auxdata { __u32 tp_status; __u32 tp_len; @@ -78,6 +89,7 @@ struct tpacket_auxdata { #define TP_STATUS_LOSING 0x4 #define TP_STATUS_CSUMNOTREADY 0x8 #define TP_STATUS_VLAN_VALID 0x10 /* auxdata has valid tp_vlan_tci */ +#define TP_STATUS_BLK_TMO 0x20 /* Tx ring - header status */ #define TP_STATUS_AVAILABLE 0x0 @@ -85,6 +97,9 @@ struct tpacket_auxdata { #define TP_STATUS_SENDING 0x2 #define TP_STATUS_WRONG_FORMAT 0x4 +/* Rx ring - feature request bits */ +#define TP_FT_REQ_FILL_RXHASH 0x1 + struct tpacket_hdr { unsigned long tp_status; unsigned int tp_len; @@ -111,11 +126,100 @@ struct tpacket2_hdr { __u16 tp_padding; }; +struct tpacket_hdr_variant1 { + __u32 tp_rxhash; + __u32 tp_vlan_tci; +}; + +struct tpacket3_hdr { + __u32 tp_next_offset; + __u32 tp_sec; + __u32 tp_nsec; + __u32 tp_snaplen; + __u32 tp_len; + __u32 tp_status; + __u16 tp_mac; + __u16 tp_net; + /* pkt_hdr variants */ + union { + struct tpacket_hdr_variant1 hv1; + }; +}; + +struct tpacket_bd_ts { + unsigned int ts_sec; + union { + unsigned int ts_usec; + unsigned int ts_nsec; + }; +}; + +struct tpacket_hdr_v1 { + __u32 block_status; + __u32 num_pkts; + __u32 offset_to_first_pkt; + + /* Number of valid bytes (including padding) + * blk_len <= tp_block_size + */ + __u32 blk_len; + + /* + * Quite a few uses of sequence number: + * 1. Make sure cache flush etc worked. + * Well, one can argue - why not use the increasing ts below? + * But look at 2. below first. + * 2. When you pass around blocks to other user space decoders, + * you can see which blk[s] is[are] outstanding etc. + * 3. Validate kernel code. + */ + __aligned_u64 seq_num; + + /* + * ts_last_pkt: + * + * Case 1. Block has 'N'(N >=1) packets and TMO'd(timed out) + * ts_last_pkt == 'time-stamp of last packet' and NOT the + * time when the timer fired and the block was closed. + * By providing the ts of the last packet we can absolutely + * guarantee that time-stamp wise, the first packet in the + * next block will never precede the last packet of the + * previous block. + * Case 2. Block has zero packets and TMO'd + * ts_last_pkt = time when the timer fired and the block + * was closed. + * Case 3. Block has 'N' packets and NO TMO. + * ts_last_pkt = time-stamp of the last pkt in the block. + * + * ts_first_pkt: + * Is always the time-stamp when the block was opened. + * Case a) ZERO packets + * No packets to deal with but atleast you know the + * time-interval of this block. + * Case b) Non-zero packets + * Use the ts of the first packet in the block. + * + */ + struct tpacket_bd_ts ts_first_pkt, ts_last_pkt; +}; + +union tpacket_bd_header_u { + struct tpacket_hdr_v1 bh1; +}; + +struct tpacket_block_desc { + __u32 version; + __u32 offset_to_priv; + union tpacket_bd_header_u hdr; +}; + #define TPACKET2_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll)) +#define TPACKET3_HDRLEN (TPACKET_ALIGN(sizeof(struct tpacket3_hdr)) + sizeof(struct sockaddr_ll)) enum tpacket_versions { TPACKET_V1, TPACKET_V2, + TPACKET_V3 }; /* @@ -138,6 +242,21 @@ struct tpacket_req { unsigned int tp_frame_nr; /* Total number of frames */ }; +struct tpacket_req3 { + unsigned int tp_block_size; /* Minimal size of contiguous block */ + unsigned int tp_block_nr; /* Number of blocks */ + unsigned int tp_frame_size; /* Size of frame */ + unsigned int tp_frame_nr; /* Total number of frames */ + unsigned int tp_retire_blk_tov; /* timeout in msecs */ + unsigned int tp_sizeof_priv; /* offset to private data area */ + unsigned int tp_feature_req_word; +}; + +union tpacket_req_u { + struct tpacket_req req; + struct tpacket_req3 req3; +}; + struct packet_mreq { int mr_ifindex; unsigned short mr_type; diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h index 184bc5566207..23cefa1111bf 100644 --- a/include/linux/if_pppol2tp.h +++ b/include/linux/if_pppol2tp.h @@ -39,7 +39,7 @@ struct pppol2tp_addr { * bits. So we need a different sockaddr structure. */ struct pppol2tpv3_addr { - pid_t pid; /* pid that owns the fd. + __kernel_pid_t pid; /* pid that owns the fd. * 0 => current */ int fd; /* FD of UDP or IP socket to use */ diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h index 397921b09ef9..b5f927f59f26 100644 --- a/include/linux/if_pppox.h +++ b/include/linux/if_pppox.h @@ -20,8 +20,9 @@ #include <linux/types.h> #include <asm/byteorder.h> -#ifdef __KERNEL__ +#include <linux/socket.h> #include <linux/if_ether.h> +#ifdef __KERNEL__ #include <linux/if.h> #include <linux/netdevice.h> #include <linux/ppp_channel.h> @@ -63,7 +64,7 @@ struct pptp_addr { #define PX_MAX_PROTO 3 struct sockaddr_pppox { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ union { struct pppoe_addr pppoe; @@ -77,7 +78,7 @@ struct sockaddr_pppox { * type instead. */ struct sockaddr_pppol2tp { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ struct pppol2tp_addr pppol2tp; } __attribute__((packed)); @@ -86,7 +87,7 @@ struct sockaddr_pppol2tp { * bits. So we need a different sockaddr structure. */ struct sockaddr_pppol2tpv3 { - sa_family_t sa_family; /* address family, AF_PPPOX */ + __kernel_sa_family_t sa_family; /* address family, AF_PPPOX */ unsigned int sa_protocol; /* protocol identifier */ struct pppol2tpv3_addr pppol2tp; } __attribute__((packed)); diff --git a/include/linux/ima.h b/include/linux/ima.h index 09e6e62f9953..6ac8e50c6cf5 100644 --- a/include/linux/ima.h +++ b/include/linux/ima.h @@ -15,8 +15,6 @@ struct linux_binprm; #ifdef CONFIG_IMA extern int ima_bprm_check(struct linux_binprm *bprm); -extern int ima_inode_alloc(struct inode *inode); -extern void ima_inode_free(struct inode *inode); extern int ima_file_check(struct file *file, int mask); extern void ima_file_free(struct file *file); extern int ima_file_mmap(struct file *file, unsigned long prot); @@ -27,16 +25,6 @@ static inline int ima_bprm_check(struct linux_binprm *bprm) return 0; } -static inline int ima_inode_alloc(struct inode *inode) -{ - return 0; -} - -static inline void ima_inode_free(struct inode *inode) -{ - return; -} - static inline int ima_file_check(struct file *file, int mask) { return 0; @@ -51,6 +39,5 @@ static inline int ima_file_mmap(struct file *file, unsigned long prot) { return 0; } - #endif /* CONFIG_IMA_H */ #endif /* _LINUX_IMA_H */ diff --git a/include/linux/in.h b/include/linux/in.h index beeb6dee2b49..01129c0ea87c 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -182,7 +182,7 @@ struct in_pktinfo { /* Structure describing an Internet (IP) socket address. */ #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ struct sockaddr_in { - sa_family_t sin_family; /* Address family */ + __kernel_sa_family_t sin_family; /* Address family */ __be16 sin_port; /* Port number */ struct in_addr sin_addr; /* Internet address */ diff --git a/include/linux/inet_diag.h b/include/linux/inet_diag.h index bc8c49022084..80b480c97532 100644 --- a/include/linux/inet_diag.h +++ b/include/linux/inet_diag.h @@ -97,9 +97,10 @@ enum { INET_DIAG_INFO, INET_DIAG_VEGASINFO, INET_DIAG_CONG, + INET_DIAG_TOS, }; -#define INET_DIAG_MAX INET_DIAG_CONG +#define INET_DIAG_MAX INET_DIAG_TOS /* INET_DIAG_MEM */ diff --git a/include/linux/init_task.h b/include/linux/init_task.h index d14e058aaeed..08ffab01e76c 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -42,7 +42,7 @@ extern struct fs_struct init_fs; .cputimer = { \ .cputime = INIT_CPUTIME, \ .running = 0, \ - .lock = __SPIN_LOCK_UNLOCKED(sig.cputimer.lock), \ + .lock = __RAW_SPIN_LOCK_UNLOCKED(sig.cputimer.lock), \ }, \ .cred_guard_mutex = \ __MUTEX_INITIALIZER(sig.cred_guard_mutex), \ diff --git a/include/linux/input.h b/include/linux/input.h index a637e7814334..3862e32c4eeb 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -505,6 +505,7 @@ struct input_keymap_entry { #define BTN_TOOL_FINGER 0x145 #define BTN_TOOL_MOUSE 0x146 #define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ #define BTN_TOUCH 0x14a #define BTN_STYLUS 0x14b #define BTN_STYLUS2 0x14c @@ -814,6 +815,7 @@ struct input_keymap_entry { #define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */ #define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */ #define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */ +#define SW_LINEIN_INSERT 0x0d /* set = inserted */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) @@ -1609,7 +1611,7 @@ struct ff_device { struct file *effect_owners[]; }; -int input_ff_create(struct input_dev *dev, int max_effects); +int input_ff_create(struct input_dev *dev, unsigned int max_effects); void input_ff_destroy(struct input_dev *dev); int input_ff_event(struct input_dev *dev, unsigned int type, unsigned int code, int value); diff --git a/include/linux/input/adp5589.h b/include/linux/input/adp5589.h index ef792ecfaabf..1a05eee15e67 100644 --- a/include/linux/input/adp5589.h +++ b/include/linux/input/adp5589.h @@ -1,5 +1,5 @@ /* - * Analog Devices ADP5589 I/O Expander and QWERTY Keypad Controller + * Analog Devices ADP5589/ADP5585 I/O Expander and QWERTY Keypad Controller * * Copyright 2010-2011 Analog Devices Inc. * @@ -9,89 +9,9 @@ #ifndef _ADP5589_H #define _ADP5589_H -#define ADP5589_ID 0x00 -#define ADP5589_INT_STATUS 0x01 -#define ADP5589_STATUS 0x02 -#define ADP5589_FIFO_1 0x03 -#define ADP5589_FIFO_2 0x04 -#define ADP5589_FIFO_3 0x05 -#define ADP5589_FIFO_4 0x06 -#define ADP5589_FIFO_5 0x07 -#define ADP5589_FIFO_6 0x08 -#define ADP5589_FIFO_7 0x09 -#define ADP5589_FIFO_8 0x0A -#define ADP5589_FIFO_9 0x0B -#define ADP5589_FIFO_10 0x0C -#define ADP5589_FIFO_11 0x0D -#define ADP5589_FIFO_12 0x0E -#define ADP5589_FIFO_13 0x0F -#define ADP5589_FIFO_14 0x10 -#define ADP5589_FIFO_15 0x11 -#define ADP5589_FIFO_16 0x12 -#define ADP5589_GPI_INT_STAT_A 0x13 -#define ADP5589_GPI_INT_STAT_B 0x14 -#define ADP5589_GPI_INT_STAT_C 0x15 -#define ADP5589_GPI_STATUS_A 0x16 -#define ADP5589_GPI_STATUS_B 0x17 -#define ADP5589_GPI_STATUS_C 0x18 -#define ADP5589_RPULL_CONFIG_A 0x19 -#define ADP5589_RPULL_CONFIG_B 0x1A -#define ADP5589_RPULL_CONFIG_C 0x1B -#define ADP5589_RPULL_CONFIG_D 0x1C -#define ADP5589_RPULL_CONFIG_E 0x1D -#define ADP5589_GPI_INT_LEVEL_A 0x1E -#define ADP5589_GPI_INT_LEVEL_B 0x1F -#define ADP5589_GPI_INT_LEVEL_C 0x20 -#define ADP5589_GPI_EVENT_EN_A 0x21 -#define ADP5589_GPI_EVENT_EN_B 0x22 -#define ADP5589_GPI_EVENT_EN_C 0x23 -#define ADP5589_GPI_INTERRUPT_EN_A 0x24 -#define ADP5589_GPI_INTERRUPT_EN_B 0x25 -#define ADP5589_GPI_INTERRUPT_EN_C 0x26 -#define ADP5589_DEBOUNCE_DIS_A 0x27 -#define ADP5589_DEBOUNCE_DIS_B 0x28 -#define ADP5589_DEBOUNCE_DIS_C 0x29 -#define ADP5589_GPO_DATA_OUT_A 0x2A -#define ADP5589_GPO_DATA_OUT_B 0x2B -#define ADP5589_GPO_DATA_OUT_C 0x2C -#define ADP5589_GPO_OUT_MODE_A 0x2D -#define ADP5589_GPO_OUT_MODE_B 0x2E -#define ADP5589_GPO_OUT_MODE_C 0x2F -#define ADP5589_GPIO_DIRECTION_A 0x30 -#define ADP5589_GPIO_DIRECTION_B 0x31 -#define ADP5589_GPIO_DIRECTION_C 0x32 -#define ADP5589_UNLOCK1 0x33 -#define ADP5589_UNLOCK2 0x34 -#define ADP5589_EXT_LOCK_EVENT 0x35 -#define ADP5589_UNLOCK_TIMERS 0x36 -#define ADP5589_LOCK_CFG 0x37 -#define ADP5589_RESET1_EVENT_A 0x38 -#define ADP5589_RESET1_EVENT_B 0x39 -#define ADP5589_RESET1_EVENT_C 0x3A -#define ADP5589_RESET2_EVENT_A 0x3B -#define ADP5589_RESET2_EVENT_B 0x3C -#define ADP5589_RESET_CFG 0x3D -#define ADP5589_PWM_OFFT_LOW 0x3E -#define ADP5589_PWM_OFFT_HIGH 0x3F -#define ADP5589_PWM_ONT_LOW 0x40 -#define ADP5589_PWM_ONT_HIGH 0x41 -#define ADP5589_PWM_CFG 0x42 -#define ADP5589_CLOCK_DIV_CFG 0x43 -#define ADP5589_LOGIC_1_CFG 0x44 -#define ADP5589_LOGIC_2_CFG 0x45 -#define ADP5589_LOGIC_FF_CFG 0x46 -#define ADP5589_LOGIC_INT_EVENT_EN 0x47 -#define ADP5589_POLL_PTIME_CFG 0x48 -#define ADP5589_PIN_CONFIG_A 0x49 -#define ADP5589_PIN_CONFIG_B 0x4A -#define ADP5589_PIN_CONFIG_C 0x4B -#define ADP5589_PIN_CONFIG_D 0x4C -#define ADP5589_GENERAL_CFG 0x4D -#define ADP5589_INT_EN 0x4E - -#define ADP5589_DEVICE_ID_MASK 0xF - -/* Put one of these structures in i2c_board_info platform_data */ +/* + * ADP5589 specific GPI and Keymap defines + */ #define ADP5589_KEYMAPSIZE 88 @@ -127,6 +47,35 @@ #define ADP5589_GPIMAPSIZE_MAX (ADP5589_GPI_PIN_END - ADP5589_GPI_PIN_BASE + 1) +/* + * ADP5585 specific GPI and Keymap defines + */ + +#define ADP5585_KEYMAPSIZE 30 + +#define ADP5585_GPI_PIN_ROW0 37 +#define ADP5585_GPI_PIN_ROW1 38 +#define ADP5585_GPI_PIN_ROW2 39 +#define ADP5585_GPI_PIN_ROW3 40 +#define ADP5585_GPI_PIN_ROW4 41 +#define ADP5585_GPI_PIN_ROW5 42 +#define ADP5585_GPI_PIN_COL0 43 +#define ADP5585_GPI_PIN_COL1 44 +#define ADP5585_GPI_PIN_COL2 45 +#define ADP5585_GPI_PIN_COL3 46 +#define ADP5585_GPI_PIN_COL4 47 +#define GPI_LOGIC 48 + +#define ADP5585_GPI_PIN_ROW_BASE ADP5585_GPI_PIN_ROW0 +#define ADP5585_GPI_PIN_ROW_END ADP5585_GPI_PIN_ROW5 +#define ADP5585_GPI_PIN_COL_BASE ADP5585_GPI_PIN_COL0 +#define ADP5585_GPI_PIN_COL_END ADP5585_GPI_PIN_COL4 + +#define ADP5585_GPI_PIN_BASE ADP5585_GPI_PIN_ROW_BASE +#define ADP5585_GPI_PIN_END ADP5585_GPI_PIN_COL_END + +#define ADP5585_GPIMAPSIZE_MAX (ADP5585_GPI_PIN_END - ADP5585_GPI_PIN_BASE + 1) + struct adp5589_gpi_map { unsigned short pin; unsigned short sw_evt; @@ -159,7 +108,7 @@ struct adp5589_gpi_map { #define RESET2_POL_HIGH (1 << 7) #define RESET2_POL_LOW (0 << 7) -/* Mask Bits: +/* ADP5589 Mask Bits: * C C C C C C C C C C C | R R R R R R R R * 1 9 8 7 6 5 4 3 2 1 0 | 7 6 5 4 3 2 1 0 * 0 @@ -168,18 +117,44 @@ struct adp5589_gpi_map { * 8 7 6 5 4 3 2 1 0 9 8 | 7 6 5 4 3 2 1 0 */ -#define ADP_ROW(x) (1 << (x)) -#define ADP_COL(x) (1 << (x + 8)) +#define ADP_ROW(x) (1 << (x)) +#define ADP_COL(x) (1 << (x + 8)) +#define ADP5589_ROW_MASK 0xFF +#define ADP5589_COL_MASK 0xFF +#define ADP5589_COL_SHIFT 8 +#define ADP5589_MAX_ROW_NUM 7 +#define ADP5589_MAX_COL_NUM 10 + +/* ADP5585 Mask Bits: + * C C C C C | R R R R R R + * 4 3 2 1 0 | 5 4 3 2 1 0 + * + * ---- BIT -- ----------- + * 1 0 0 0 0 | 0 0 0 0 0 0 + * 0 9 8 7 6 | 5 4 3 2 1 0 + */ + +#define ADP5585_ROW_MASK 0x3F +#define ADP5585_COL_MASK 0x1F +#define ADP5585_ROW_SHIFT 0 +#define ADP5585_COL_SHIFT 6 +#define ADP5585_MAX_ROW_NUM 5 +#define ADP5585_MAX_COL_NUM 4 + +#define ADP5585_ROW(x) (1 << ((x) & ADP5585_ROW_MASK)) +#define ADP5585_COL(x) (1 << (((x) & ADP5585_COL_MASK) + ADP5585_COL_SHIFT)) + +/* Put one of these structures in i2c_board_info platform_data */ struct adp5589_kpad_platform_data { unsigned keypad_en_mask; /* Keypad (Rows/Columns) enable mask */ const unsigned short *keymap; /* Pointer to keymap */ unsigned short keymapsize; /* Keymap size */ bool repeat; /* Enable key repeat */ - bool en_keylock; /* Enable key lock feature */ - unsigned char unlock_key1; /* Unlock Key 1 */ - unsigned char unlock_key2; /* Unlock Key 2 */ - unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable */ + bool en_keylock; /* Enable key lock feature (ADP5589 only)*/ + unsigned char unlock_key1; /* Unlock Key 1 (ADP5589 only) */ + unsigned char unlock_key2; /* Unlock Key 2 (ADP5589 only) */ + unsigned char unlock_timer; /* Time in seconds [0..7] between the two unlock keys 0=disable (ADP5589 only) */ unsigned char scan_cycle_time; /* Time between consecutive scan cycles */ unsigned char reset_cfg; /* Reset config */ unsigned short reset1_key_1; /* Reset Key 1 */ diff --git a/include/linux/input/adxl34x.h b/include/linux/input/adxl34x.h index df00d998a44a..57e01a7cb006 100644 --- a/include/linux/input/adxl34x.h +++ b/include/linux/input/adxl34x.h @@ -30,8 +30,9 @@ struct adxl34x_platform_data { * Y, or Z participation in Tap detection. A '0' excludes the * selected axis from participation in Tap detection. * Setting the SUPPRESS bit suppresses Double Tap detection if - * acceleration greater than tap_threshold is present between - * taps. + * acceleration greater than tap_threshold is present during the + * tap_latency period, i.e. after the first tap but before the + * opening of the second tap window. */ #define ADXL_SUPPRESS (1 << 3) @@ -226,13 +227,13 @@ struct adxl34x_platform_data { * detection will begin and prevent the detection of activity. This * bit serially links the activity and inactivity functions. When '0' * the inactivity and activity functions are concurrent. Additional - * information can be found in the Application section under Link - * Mode. + * information can be found in the ADXL34x datasheet's Application + * section under Link Mode. * AUTO_SLEEP: A '1' sets the ADXL34x to switch to Sleep Mode * when inactivity (acceleration has been below inactivity_threshold * for at least inactivity_time) is detected and the LINK bit is set. - * A '0' disables automatic switching to Sleep Mode. See SLEEP - * for further description. + * A '0' disables automatic switching to Sleep Mode. See the + * Sleep Bit section of the ADXL34x datasheet for more information. */ #define ADXL_LINK (1 << 5) @@ -266,6 +267,12 @@ struct adxl34x_platform_data { u8 watermark; + /* + * When acceleration measurements are received from the ADXL34x + * events are sent to the event subsystem. The following settings + * select the event type and event code for new x, y and z axis data + * respectively. + */ u32 ev_type; /* EV_ABS or EV_REL */ u32 ev_code_x; /* ABS_X,Y,Z or REL_X,Y,Z */ @@ -289,7 +296,7 @@ struct adxl34x_platform_data { u32 ev_code_act_inactivity; /* EV_KEY */ /* - * Use ADXL34x INT2 instead of INT1 + * Use ADXL34x INT2 pin instead of INT1 pin for interrupt output */ u8 use_int2; diff --git a/include/linux/integrity.h b/include/linux/integrity.h new file mode 100644 index 000000000000..a0c41256cb92 --- /dev/null +++ b/include/linux/integrity.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2009 IBM Corporation + * Author: Mimi Zohar <zohar@us.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + */ + +#ifndef _LINUX_INTEGRITY_H +#define _LINUX_INTEGRITY_H + +#include <linux/fs.h> + +enum integrity_status { + INTEGRITY_PASS = 0, + INTEGRITY_FAIL, + INTEGRITY_NOLABEL, + INTEGRITY_NOXATTRS, + INTEGRITY_UNKNOWN, +}; + +/* List of EVM protected security xattrs */ +#ifdef CONFIG_INTEGRITY +extern int integrity_inode_alloc(struct inode *inode); +extern void integrity_inode_free(struct inode *inode); + +#else +static inline int integrity_inode_alloc(struct inode *inode) +{ + return 0; +} + +static inline void integrity_inode_free(struct inode *inode) +{ + return; +} +#endif /* CONFIG_INTEGRITY_H */ +#endif /* _LINUX_INTEGRITY_H */ diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 9310c699a37d..e6ca56de9936 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -271,7 +271,7 @@ struct qi_desc { }; struct q_inval { - spinlock_t q_lock; + raw_spinlock_t q_lock; struct qi_desc *desc; /* invalidation queue */ int *desc_status; /* desc status */ int free_head; /* first free entry */ @@ -279,7 +279,7 @@ struct q_inval { int free_cnt; }; -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP /* 1MB - maximum possible interrupt remapping table size */ #define INTR_REMAP_PAGE_ORDER 8 #define INTR_REMAP_TABLE_REG_SIZE 0xf @@ -311,14 +311,14 @@ struct intel_iommu { u64 cap; u64 ecap; u32 gcmd; /* Holds TE, EAFL. Don't need SRTP, SFL, WBF */ - spinlock_t register_lock; /* protect register handling */ + raw_spinlock_t register_lock; /* protect register handling */ int seq_id; /* sequence id of the iommu */ int agaw; /* agaw of this iommu */ int msagaw; /* max sagaw of this iommu */ unsigned int irq; unsigned char name[13]; /* Device Name */ -#ifdef CONFIG_DMAR +#ifdef CONFIG_INTEL_IOMMU unsigned long *domain_ids; /* bitmap of domains */ struct dmar_domain **domains; /* ptr to domains */ spinlock_t lock; /* protect context, domain ids */ @@ -329,7 +329,7 @@ struct intel_iommu { struct q_inval *qi; /* Queued invalidation info */ u32 *iommu_state; /* Store iommu states between suspend and resume.*/ -#ifdef CONFIG_INTR_REMAP +#ifdef CONFIG_IRQ_REMAP struct ir_table *ir_table; /* Interrupt remapping info */ #endif int node; diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index a103732b7588..a64b00e286f5 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -59,6 +59,8 @@ * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set * IRQF_NO_THREAD - Interrupt cannot be threaded + * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device + * resume time. */ #define IRQF_DISABLED 0x00000020 #define IRQF_SAMPLE_RANDOM 0x00000040 @@ -72,6 +74,7 @@ #define IRQF_NO_SUSPEND 0x00004000 #define IRQF_FORCE_RESUME 0x00008000 #define IRQF_NO_THREAD 0x00010000 +#define IRQF_EARLY_RESUME 0x00020000 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) @@ -95,6 +98,7 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @flags: flags (see IRQF_* above) * @name: name of the device * @dev_id: cookie to identify the device + * @percpu_dev_id: cookie to identify the device * @next: pointer to the next irqaction for shared interrupts * @irq: interrupt number * @dir: pointer to the proc/irq/NN/name entry @@ -104,17 +108,18 @@ typedef irqreturn_t (*irq_handler_t)(int, void *); * @thread_mask: bitmask for keeping track of @thread activity */ struct irqaction { - irq_handler_t handler; - unsigned long flags; - void *dev_id; - struct irqaction *next; - int irq; - irq_handler_t thread_fn; - struct task_struct *thread; - unsigned long thread_flags; - unsigned long thread_mask; - const char *name; - struct proc_dir_entry *dir; + irq_handler_t handler; + unsigned long flags; + void *dev_id; + void __percpu *percpu_dev_id; + struct irqaction *next; + int irq; + irq_handler_t thread_fn; + struct task_struct *thread; + unsigned long thread_flags; + unsigned long thread_mask; + const char *name; + struct proc_dir_entry *dir; } ____cacheline_internodealigned_in_smp; extern irqreturn_t no_action(int cpl, void *dev_id); @@ -136,6 +141,10 @@ extern int __must_check request_any_context_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *name, void *dev_id); +extern int __must_check +request_percpu_irq(unsigned int irq, irq_handler_t handler, + const char *devname, void __percpu *percpu_dev_id); + extern void exit_irq_thread(void); #else @@ -164,10 +173,18 @@ request_any_context_irq(unsigned int irq, irq_handler_t handler, return request_irq(irq, handler, flags, name, dev_id); } +static inline int __must_check +request_percpu_irq(unsigned int irq, irq_handler_t handler, + const char *devname, void __percpu *percpu_dev_id) +{ + return request_irq(irq, handler, 0, devname, percpu_dev_id); +} + static inline void exit_irq_thread(void) { } #endif extern void free_irq(unsigned int, void *); +extern void free_percpu_irq(unsigned int, void __percpu *); struct device; @@ -207,7 +224,9 @@ extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); extern void disable_irq_nosync(unsigned int irq); extern void disable_irq(unsigned int irq); +extern void disable_percpu_irq(unsigned int irq); extern void enable_irq(unsigned int irq); +extern void enable_percpu_irq(unsigned int irq, unsigned int type); /* The following three functions are for the core kernel use only. */ #ifdef CONFIG_GENERIC_HARDIRQS diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 8cdcc2a199ad..e44e84f0156c 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -27,7 +27,7 @@ * The io_mapping mechanism provides an abstraction for mapping * individual pages from an io device to the CPU in an efficient fashion. * - * See Documentation/io_mapping.txt + * See Documentation/io-mapping.txt */ #ifdef CONFIG_HAVE_ATOMIC_IOMAP @@ -117,6 +117,8 @@ io_mapping_unmap(void __iomem *vaddr) #else +#include <linux/uaccess.h> + /* this struct isn't actually defined anywhere */ struct io_mapping; @@ -138,12 +140,14 @@ static inline void __iomem * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { + pagefault_disable(); return ((char __force __iomem *) mapping) + offset; } static inline void io_mapping_unmap_atomic(void __iomem *vaddr) { + pagefault_enable(); } /* Non-atomic map/unmap */ diff --git a/include/linux/ip6_tunnel.h b/include/linux/ip6_tunnel.h index acb9ad684d63..bf22b0317902 100644 --- a/include/linux/ip6_tunnel.h +++ b/include/linux/ip6_tunnel.h @@ -16,6 +16,8 @@ #define IP6_TNL_F_MIP6_DEV 0x8 /* copy DSCP from the outer packet */ #define IP6_TNL_F_RCV_DSCP_COPY 0x10 +/* copy fwmark from inner packet */ +#define IP6_TNL_F_USE_ORIG_FWMARK 0x20 struct ip6_tnl_parm { char name[IFNAMSIZ]; /* name of tunnel device */ diff --git a/include/linux/ipx.h b/include/linux/ipx.h index aabb1d294025..3d48014cdd71 100644 --- a/include/linux/ipx.h +++ b/include/linux/ipx.h @@ -7,7 +7,7 @@ #define IPX_MTU 576 struct sockaddr_ipx { - sa_family_t sipx_family; + __kernel_sa_family_t sipx_family; __be16 sipx_port; __be32 sipx_network; unsigned char sipx_node[IPX_NODE_LEN]; diff --git a/include/linux/irda.h b/include/linux/irda.h index 00bdad0e8515..a014c3252311 100644 --- a/include/linux/irda.h +++ b/include/linux/irda.h @@ -26,12 +26,9 @@ #define KERNEL_IRDA_H #include <linux/types.h> +#include <linux/socket.h> -/* Please do *not* add any #include in this file, this file is - * included as-is in user space. - * Please fix the calling file to properly included needed files before - * this one, or preferably to include <net/irda/irda.h> instead. - * Jean II */ +/* Note that this file is shared with user space. */ /* Hint bit positions for first hint byte */ #define HINT_PNP 0x01 @@ -125,7 +122,7 @@ enum { #define LSAP_ANY 0xff struct sockaddr_irda { - sa_family_t sir_family; /* AF_IRDA */ + __kernel_sa_family_t sir_family; /* AF_IRDA */ __u8 sir_lsap_sel; /* LSAP selector */ __u32 sir_addr; /* Device address */ char sir_name[25]; /* Usually <service>:IrDA:TinyTP */ diff --git a/include/linux/irq.h b/include/linux/irq.h index 59517300a315..59e49c80cc2c 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -66,6 +66,7 @@ typedef void (*irq_preflow_handler_t)(struct irq_data *data); * IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set) * IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context * IRQ_NESTED_TRHEAD - Interrupt nests into another thread + * IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable */ enum { IRQ_TYPE_NONE = 0x00000000, @@ -88,12 +89,13 @@ enum { IRQ_MOVE_PCNTXT = (1 << 14), IRQ_NESTED_THREAD = (1 << 15), IRQ_NOTHREAD = (1 << 16), + IRQ_PER_CPU_DEVID = (1 << 17), }; #define IRQF_MODIFY_MASK \ (IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \ IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \ - IRQ_PER_CPU | IRQ_NESTED_THREAD) + IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID) #define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING) @@ -336,12 +338,14 @@ struct irq_chip { * IRQCHIP_MASK_ON_SUSPEND: Mask non wake irqs in the suspend path * IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks * when irq enabled + * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip */ enum { IRQCHIP_SET_TYPE_MASKED = (1 << 0), IRQCHIP_EOI_IF_HANDLED = (1 << 1), IRQCHIP_MASK_ON_SUSPEND = (1 << 2), IRQCHIP_ONOFFLINE_ENABLED = (1 << 3), + IRQCHIP_SKIP_SET_WAKE = (1 << 4), }; /* This include will go away once we isolated irq_desc usage to core code */ @@ -365,6 +369,8 @@ enum { struct irqaction; extern int setup_irq(unsigned int irq, struct irqaction *new); extern void remove_irq(unsigned int irq, struct irqaction *act); +extern int setup_percpu_irq(unsigned int irq, struct irqaction *new); +extern void remove_percpu_irq(unsigned int irq, struct irqaction *act); extern void irq_cpu_online(void); extern void irq_cpu_offline(void); @@ -392,6 +398,7 @@ extern void handle_edge_irq(unsigned int irq, struct irq_desc *desc); extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc); extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc); extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc); +extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc); extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc); extern void handle_nested_irq(unsigned int irq); @@ -420,6 +427,8 @@ static inline void irq_set_chip_and_handler(unsigned int irq, struct irq_chip *c irq_set_chip_and_handler_name(irq, chip, handle, NULL); } +extern int irq_set_percpu_devid(unsigned int irq); + extern void __irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained, const char *name); @@ -481,6 +490,13 @@ static inline void irq_set_nested_thread(unsigned int irq, bool nest) irq_clear_status_flags(irq, IRQ_NESTED_THREAD); } +static inline void irq_set_percpu_devid_flags(unsigned int irq) +{ + irq_set_status_flags(irq, + IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD | + IRQ_NOPROBE | IRQ_PER_CPU_DEVID); +} + /* Handle dynamic irq creation and destruction */ extern unsigned int create_irq_nr(unsigned int irq_want, int node); extern int create_irq(void); diff --git a/include/linux/irq_work.h b/include/linux/irq_work.h index 4fa09d4d0b71..6a9e8f5399e2 100644 --- a/include/linux/irq_work.h +++ b/include/linux/irq_work.h @@ -1,20 +1,23 @@ #ifndef _LINUX_IRQ_WORK_H #define _LINUX_IRQ_WORK_H +#include <linux/llist.h> + struct irq_work { - struct irq_work *next; + unsigned long flags; + struct llist_node llnode; void (*func)(struct irq_work *); }; static inline -void init_irq_work(struct irq_work *entry, void (*func)(struct irq_work *)) +void init_irq_work(struct irq_work *work, void (*func)(struct irq_work *)) { - entry->next = NULL; - entry->func = func; + work->flags = 0; + work->func = func; } -bool irq_work_queue(struct irq_work *entry); +bool irq_work_queue(struct irq_work *work); void irq_work_run(void); -void irq_work_sync(struct irq_work *entry); +void irq_work_sync(struct irq_work *work); #endif /* _LINUX_IRQ_WORK_H */ diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h index 150134ac709a..6b69c2c9dff1 100644 --- a/include/linux/irqdesc.h +++ b/include/linux/irqdesc.h @@ -53,6 +53,7 @@ struct irq_desc { unsigned long last_unhandled; /* Aging timer for unhandled count */ unsigned int irqs_unhandled; raw_spinlock_t lock; + struct cpumask *percpu_enabled; #ifdef CONFIG_SMP const struct cpumask *affinity_hint; struct irq_affinity_notify *affinity_notify; diff --git a/include/linux/isdn.h b/include/linux/isdn.h index 44cd663c53b6..4ccf95d681b4 100644 --- a/include/linux/isdn.h +++ b/include/linux/isdn.h @@ -68,7 +68,7 @@ #define ISDN_NET_ENCAP_SYNCPPP 4 #define ISDN_NET_ENCAP_UIHDLC 5 #define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt*/ +#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ #define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE /* Facility which currently uses an ISDN-channel */ diff --git a/include/linux/jiffies.h b/include/linux/jiffies.h index f97672a36fa8..265e2c3cbd1c 100644 --- a/include/linux/jiffies.h +++ b/include/linux/jiffies.h @@ -303,7 +303,7 @@ extern void jiffies_to_timespec(const unsigned long jiffies, extern unsigned long timeval_to_jiffies(const struct timeval *value); extern void jiffies_to_timeval(const unsigned long jiffies, struct timeval *value); -extern clock_t jiffies_to_clock_t(long x); +extern clock_t jiffies_to_clock_t(unsigned long x); extern unsigned long clock_t_to_jiffies(unsigned long x); extern u64 jiffies_64_to_clock_t(u64 x); extern u64 nsec_to_clock_t(u64 x); diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 46ac9a50528d..8eefcf7e95eb 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -382,7 +382,7 @@ static inline char *pack_hex_byte(char *buf, u8 byte) } extern int hex_to_bin(char ch); -extern void hex2bin(u8 *dst, const char *src, size_t count); +extern int __must_check hex2bin(u8 *dst, const char *src, size_t count); /* * General tracing related utility functions - trace_printk(), diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h index dd7c12e875bc..dce6e4dbeda7 100644 --- a/include/linux/kprobes.h +++ b/include/linux/kprobes.h @@ -181,7 +181,7 @@ struct kretprobe { int nmissed; size_t data_size; struct hlist_head free_instances; - spinlock_t lock; + raw_spinlock_t lock; }; struct kretprobe_instance { diff --git a/include/linux/kvm.h b/include/linux/kvm.h index aace6b8691a2..f47fcd30273d 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -371,6 +371,7 @@ struct kvm_s390_psw { #define KVM_S390_INT_VIRTIO 0xffff2603u #define KVM_S390_INT_SERVICE 0xffff2401u #define KVM_S390_INT_EMERGENCY 0xffff1201u +#define KVM_S390_INT_EXTERNAL_CALL 0xffff1202u struct kvm_s390_interrupt { __u32 type; @@ -463,7 +464,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_VAPIC 6 #define KVM_CAP_EXT_CPUID 7 #define KVM_CAP_CLOCKSOURCE 8 -#define KVM_CAP_NR_VCPUS 9 /* returns max vcpus per vm */ +#define KVM_CAP_NR_VCPUS 9 /* returns recommended max vcpus per vm */ #define KVM_CAP_NR_MEMSLOTS 10 /* returns max memory slots per vm */ #define KVM_CAP_PIT 11 #define KVM_CAP_NOP_IO_DELAY 12 @@ -553,6 +554,9 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_SPAPR_TCE 63 #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 +#define KVM_CAP_MAX_VCPUS 66 /* returns max vcpus per vm */ +#define KVM_CAP_PPC_HIOR 67 +#define KVM_CAP_PPC_PAPR 68 #define KVM_CAP_S390_GMAP 71 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index eabb21a30c34..d52623199978 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -18,6 +18,7 @@ #include <linux/msi.h> #include <linux/slab.h> #include <linux/rcupdate.h> +#include <linux/ratelimit.h> #include <asm/signal.h> #include <linux/kvm.h> @@ -48,6 +49,7 @@ #define KVM_REQ_EVENT 11 #define KVM_REQ_APF_HALT 12 #define KVM_REQ_STEAL_UPDATE 13 +#define KVM_REQ_NMI 14 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 @@ -55,16 +57,16 @@ struct kvm; struct kvm_vcpu; extern struct kmem_cache *kvm_vcpu_cache; -/* - * It would be nice to use something smarter than a linear search, TBD... - * Thankfully we dont expect many devices to register (famous last words :), - * so until then it will suffice. At least its abstracted so we can change - * in one place. - */ +struct kvm_io_range { + gpa_t addr; + int len; + struct kvm_io_device *dev; +}; + struct kvm_io_bus { int dev_count; -#define NR_IOBUS_DEVS 200 - struct kvm_io_device *devs[NR_IOBUS_DEVS]; +#define NR_IOBUS_DEVS 300 + struct kvm_io_range range[NR_IOBUS_DEVS]; }; enum kvm_bus { @@ -77,8 +79,8 @@ int kvm_io_bus_write(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, int len, const void *val); int kvm_io_bus_read(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, int len, void *val); -int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, - struct kvm_io_device *dev); +int kvm_io_bus_register_dev(struct kvm *kvm, enum kvm_bus bus_idx, gpa_t addr, + int len, struct kvm_io_device *dev); int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx, struct kvm_io_device *dev); @@ -256,8 +258,9 @@ struct kvm { struct kvm_arch arch; atomic_t users_count; #ifdef KVM_COALESCED_MMIO_PAGE_OFFSET - struct kvm_coalesced_mmio_dev *coalesced_mmio_dev; struct kvm_coalesced_mmio_ring *coalesced_mmio_ring; + spinlock_t ring_lock; + struct list_head coalesced_zones; #endif struct mutex irq_lock; @@ -281,11 +284,8 @@ struct kvm { /* The guest did something we don't support. */ #define pr_unimpl(vcpu, fmt, ...) \ - do { \ - if (printk_ratelimit()) \ - printk(KERN_ERR "kvm: %i: cpu%i " fmt, \ - current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__); \ - } while (0) + pr_err_ratelimited("kvm: %i: cpu%i " fmt, \ + current->tgid, (vcpu)->vcpu_id , ## __VA_ARGS__) #define kvm_printf(kvm, fmt ...) printk(KERN_DEBUG fmt) #define vcpu_printf(vcpu, fmt...) kvm_printf(vcpu->kvm, fmt) diff --git a/include/linux/l2tp.h b/include/linux/l2tp.h index 4bdb31df8e72..e77d7f9bb246 100644 --- a/include/linux/l2tp.h +++ b/include/linux/l2tp.h @@ -8,8 +8,8 @@ #define _LINUX_L2TP_H_ #include <linux/types.h> -#ifdef __KERNEL__ #include <linux/socket.h> +#ifdef __KERNEL__ #include <linux/in.h> #else #include <netinet/in.h> @@ -26,14 +26,15 @@ #define __SOCK_SIZE__ 16 /* sizeof(struct sockaddr) */ struct sockaddr_l2tpip { /* The first fields must match struct sockaddr_in */ - sa_family_t l2tp_family; /* AF_INET */ + __kernel_sa_family_t l2tp_family; /* AF_INET */ __be16 l2tp_unused; /* INET port number (unused) */ struct in_addr l2tp_addr; /* Internet address */ __u32 l2tp_conn_id; /* Connection ID of tunnel */ /* Pad to size of `struct sockaddr'. */ - unsigned char __pad[sizeof(struct sockaddr) - sizeof(sa_family_t) - + unsigned char __pad[sizeof(struct sockaddr) - + sizeof(__kernel_sa_family_t) - sizeof(__be16) - sizeof(struct in_addr) - sizeof(__u32)]; }; diff --git a/include/linux/lapb.h b/include/linux/lapb.h index ce709e1885cc..873c1eb635e4 100644 --- a/include/linux/lapb.h +++ b/include/linux/lapb.h @@ -44,7 +44,8 @@ struct lapb_parms_struct { unsigned int mode; }; -extern int lapb_register(struct net_device *dev, struct lapb_register_struct *callbacks); +extern int lapb_register(struct net_device *dev, + const struct lapb_register_struct *callbacks); extern int lapb_unregister(struct net_device *dev); extern int lapb_getparms(struct net_device *dev, struct lapb_parms_struct *parms); extern int lapb_setparms(struct net_device *dev, struct lapb_parms_struct *parms); diff --git a/include/linux/libata.h b/include/linux/libata.h index efd6f9800762..23fa829bf7a3 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1052,6 +1052,8 @@ extern int ata_scsi_slave_config(struct scsi_device *sdev); extern void ata_scsi_slave_destroy(struct scsi_device *sdev); extern int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth, int reason); +extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev, + int queue_depth, int reason); extern struct ata_device *ata_dev_pair(struct ata_device *adev); extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev); extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap); diff --git a/include/linux/llc.h b/include/linux/llc.h index ad7074ba81af..a2418ae13ee9 100644 --- a/include/linux/llc.h +++ b/include/linux/llc.h @@ -12,16 +12,20 @@ * * See the GNU General Public License for more details. */ + +#include <linux/socket.h> + #define __LLC_SOCK_SIZE__ 16 /* sizeof(sockaddr_llc), word align. */ struct sockaddr_llc { - sa_family_t sllc_family; /* AF_LLC */ - sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ + __kernel_sa_family_t sllc_family; /* AF_LLC */ + __kernel_sa_family_t sllc_arphrd; /* ARPHRD_ETHER */ unsigned char sllc_test; unsigned char sllc_xid; unsigned char sllc_ua; /* UA data, only for SOCK_STREAM. */ unsigned char sllc_sap; unsigned char sllc_mac[IFHWADDRLEN]; - unsigned char __pad[__LLC_SOCK_SIZE__ - sizeof(sa_family_t) * 2 - + unsigned char __pad[__LLC_SOCK_SIZE__ - + sizeof(__kernel_sa_family_t) * 2 - sizeof(unsigned char) * 4 - IFHWADDRLEN]; }; diff --git a/include/linux/llist.h b/include/linux/llist.h index aa0c8b5b3cd0..7287734e08d1 100644 --- a/include/linux/llist.h +++ b/include/linux/llist.h @@ -35,10 +35,30 @@ * * The basic atomic operation of this list is cmpxchg on long. On * architectures that don't have NMI-safe cmpxchg implementation, the - * list can NOT be used in NMI handler. So code uses the list in NMI - * handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. + * list can NOT be used in NMI handlers. So code that uses the list in + * an NMI handler should depend on CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG. + * + * Copyright 2010,2011 Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation; + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/kernel.h> +#include <asm/system.h> +#include <asm/processor.h> + struct llist_head { struct llist_node *first; }; @@ -113,14 +133,55 @@ static inline void init_llist_head(struct llist_head *list) * test whether the list is empty without deleting something from the * list. */ -static inline int llist_empty(const struct llist_head *head) +static inline bool llist_empty(const struct llist_head *head) { return ACCESS_ONCE(head->first) == NULL; } -void llist_add(struct llist_node *new, struct llist_head *head); -void llist_add_batch(struct llist_node *new_first, struct llist_node *new_last, - struct llist_head *head); -struct llist_node *llist_del_first(struct llist_head *head); -struct llist_node *llist_del_all(struct llist_head *head); +static inline struct llist_node *llist_next(struct llist_node *node) +{ + return node->next; +} + +/** + * llist_add - add a new entry + * @new: new entry to be added + * @head: the head for your lock-less list + * + * Return whether list is empty before adding. + */ +static inline bool llist_add(struct llist_node *new, struct llist_head *head) +{ + struct llist_node *entry, *old_entry; + + entry = head->first; + for (;;) { + old_entry = entry; + new->next = entry; + entry = cmpxchg(&head->first, old_entry, new); + if (entry == old_entry) + break; + } + + return old_entry == NULL; +} + +/** + * llist_del_all - delete all entries from lock-less list + * @head: the head of lock-less list to delete all entries + * + * If list is empty, return NULL, otherwise, delete all entries and + * return the pointer to the first entry. The order of entries + * deleted is from the newest to the oldest added one. + */ +static inline struct llist_node *llist_del_all(struct llist_head *head) +{ + return xchg(&head->first, NULL); +} + +extern bool llist_add_batch(struct llist_node *new_first, + struct llist_node *new_last, + struct llist_head *head); +extern struct llist_node *llist_del_first(struct llist_head *head); + #endif /* LLIST_H */ diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index ef820a3c378b..b6a56e37284c 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -548,7 +548,7 @@ do { \ #endif #ifdef CONFIG_PROVE_RCU -extern void lockdep_rcu_dereference(const char *file, const int line); +void lockdep_rcu_suspicious(const char *file, const int line, const char *s); #endif #endif /* __LINUX_LOCKDEP_H */ diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index 4c806f6d663e..2463c2619596 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -68,11 +68,6 @@ #define TWL6040_REG_ACCCTL 0x2D #define TWL6040_REG_STATUS 0x2E -#define TWL6040_CACHEREGNUM (TWL6040_REG_STATUS + 1) - -#define TWL6040_VIOREGNUM 18 -#define TWL6040_VDDREGNUM 21 - /* INTID (0x03) fields */ #define TWL6040_THINT 0x01 @@ -125,34 +120,24 @@ #define TWL6040_LPLLFIN 0x08 #define TWL6040_HPLLSEL 0x10 -/* HSLCTL (0x10) fields */ - -#define TWL6040_HSDACMODEL 0x02 -#define TWL6040_HSDRVMODEL 0x08 - -/* HSRCTL (0x11) fields */ +/* HSLCTL/R (0x10/0x11) fields */ -#define TWL6040_HSDACMODER 0x02 -#define TWL6040_HSDRVMODER 0x08 +#define TWL6040_HSDACENA (1 << 0) +#define TWL6040_HSDACMODE (1 << 1) +#define TWL6040_HSDRVMODE (1 << 3) -/* VIBCTLL (0x18) fields */ +/* VIBCTLL/R (0x18/0x1A) fields */ -#define TWL6040_VIBENAL 0x01 -#define TWL6040_VIBCTRLL 0x04 -#define TWL6040_VIBCTRLLP 0x08 -#define TWL6040_VIBCTRLLN 0x10 +#define TWL6040_VIBENA (1 << 0) +#define TWL6040_VIBSEL (1 << 1) +#define TWL6040_VIBCTRL (1 << 2) +#define TWL6040_VIBCTRL_P (1 << 3) +#define TWL6040_VIBCTRL_N (1 << 4) -/* VIBDATL (0x19) fields */ +/* VIBDATL/R (0x19/0x1B) fields */ #define TWL6040_VIBDAT_MAX 0x64 -/* VIBCTLR (0x1A) fields */ - -#define TWL6040_VIBENAR 0x01 -#define TWL6040_VIBCTRLR 0x04 -#define TWL6040_VIBCTRLRP 0x08 -#define TWL6040_VIBCTRLRN 0x10 - /* GPOCTL (0x1E) fields */ #define TWL6040_GPO1 0x01 @@ -200,6 +185,7 @@ struct twl6040 { int audpwron; int power_count; int rev; + u8 vibra_ctrl_cache[2]; int pll; unsigned int sysclk; @@ -224,5 +210,13 @@ int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); int twl6040_irq_init(struct twl6040 *twl6040); void twl6040_irq_exit(struct twl6040 *twl6040); +/* Get the combined status of the vibra control register */ +int twl6040_get_vibralr_status(struct twl6040 *twl6040); + +static inline int twl6040_get_revid(struct twl6040 *twl6040) +{ + return twl6040->rev; +} + #endif /* End of __TWL6040_CODEC_H__ */ diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h index 8dda8ded5cda..ed8fe0d04097 100644 --- a/include/linux/mfd/wm831x/core.h +++ b/include/linux/mfd/wm831x/core.h @@ -18,6 +18,7 @@ #include <linux/completion.h> #include <linux/interrupt.h> #include <linux/list.h> +#include <linux/regmap.h> /* * Register values. @@ -361,12 +362,8 @@ struct wm831x { struct mutex io_lock; struct device *dev; - int (*read_dev)(struct wm831x *wm831x, unsigned short reg, - int bytes, void *dest); - int (*write_dev)(struct wm831x *wm831x, unsigned short reg, - int bytes, void *src); - void *control_data; + struct regmap *regmap; int irq; /* Our chip IRQ */ struct mutex irq_lock; @@ -374,6 +371,8 @@ struct wm831x { int irq_masks_cur[WM831X_NUM_IRQ_REGS]; /* Currently active value */ int irq_masks_cache[WM831X_NUM_IRQ_REGS]; /* Cached hardware value */ + bool soft_shutdown; + /* Chip revision based flags */ unsigned has_gpio_ena:1; /* Has GPIO enable bit */ unsigned has_cs_sts:1; /* Has current sink status bit */ @@ -412,8 +411,11 @@ int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq); void wm831x_device_exit(struct wm831x *wm831x); int wm831x_device_suspend(struct wm831x *wm831x); +void wm831x_device_shutdown(struct wm831x *wm831x); int wm831x_irq_init(struct wm831x *wm831x, int irq); void wm831x_irq_exit(struct wm831x *wm831x); void wm831x_auxadc_init(struct wm831x *wm831x); +extern struct regmap_config wm831x_regmap_config; + #endif diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index 0ba24599fe51..1d7a3f7b3b5d 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -123,6 +123,9 @@ struct wm831x_pdata { /** Disable the touchscreen */ bool disable_touch; + /** The driver should initiate a power off sequence during shutdown */ + bool soft_shutdown; + int irq_base; int gpio_base; int gpio_defaults[WM831X_GPIO_NUM]; diff --git a/include/linux/mfd/wm8400-private.h b/include/linux/mfd/wm8400-private.h index 2aab4e93a5c9..0147b6968510 100644 --- a/include/linux/mfd/wm8400-private.h +++ b/include/linux/mfd/wm8400-private.h @@ -25,16 +25,15 @@ #include <linux/mutex.h> #include <linux/platform_device.h> +struct regmap; + #define WM8400_REGISTER_COUNT 0x55 struct wm8400 { struct device *dev; - int (*read_dev)(void *data, char reg, int count, u16 *dst); - int (*write_dev)(void *data, char reg, int count, const u16 *src); - struct mutex io_lock; - void *io_data; + struct regmap *regmap; u16 reg_cache[WM8400_REGISTER_COUNT]; diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h index f0b69cdae41c..626809147624 100644 --- a/include/linux/mfd/wm8994/core.h +++ b/include/linux/mfd/wm8994/core.h @@ -20,10 +20,12 @@ enum wm8994_type { WM8994 = 0, WM8958 = 1, + WM1811 = 2, }; struct regulator_dev; struct regulator_bulk_data; +struct regmap; #define WM8994_NUM_GPIO_REGS 11 #define WM8994_NUM_LDO_REGS 2 @@ -50,18 +52,12 @@ struct regulator_bulk_data; #define WM8994_IRQ_GPIO(x) (x + WM8994_IRQ_TEMP_WARN) struct wm8994 { - struct mutex io_lock; struct mutex irq_lock; enum wm8994_type type; struct device *dev; - int (*read_dev)(struct wm8994 *wm8994, unsigned short reg, - int bytes, void *dest); - int (*write_dev)(struct wm8994 *wm8994, unsigned short reg, - int bytes, const void *src); - - void *control_data; + struct regmap *regmap; int gpio_base; int irq_base; diff --git a/include/linux/mfd/wm8994/registers.h b/include/linux/mfd/wm8994/registers.h index f3ee84284670..fae295048a8b 100644 --- a/include/linux/mfd/wm8994/registers.h +++ b/include/linux/mfd/wm8994/registers.h @@ -72,6 +72,7 @@ #define WM8994_DC_SERVO_2 0x55 #define WM8994_DC_SERVO_4 0x57 #define WM8994_DC_SERVO_READBACK 0x58 +#define WM8994_DC_SERVO_4E 0x59 #define WM8994_ANALOGUE_HP_1 0x60 #define WM8958_MIC_DETECT_1 0xD0 #define WM8958_MIC_DETECT_2 0xD1 @@ -133,6 +134,8 @@ #define WM8994_AIF1_DAC1_FILTERS_2 0x421 #define WM8994_AIF1_DAC2_FILTERS_1 0x422 #define WM8994_AIF1_DAC2_FILTERS_2 0x423 +#define WM8958_AIF1_DAC1_NOISE_GATE 0x430 +#define WM8958_AIF1_DAC2_NOISE_GATE 0x431 #define WM8994_AIF1_DRC1_1 0x440 #define WM8994_AIF1_DRC1_2 0x441 #define WM8994_AIF1_DRC1_3 0x442 @@ -190,6 +193,7 @@ #define WM8994_AIF2_ADC_FILTERS 0x510 #define WM8994_AIF2_DAC_FILTERS_1 0x520 #define WM8994_AIF2_DAC_FILTERS_2 0x521 +#define WM8958_AIF2_DAC_NOISE_GATE 0x530 #define WM8994_AIF2_DRC_1 0x540 #define WM8994_AIF2_DRC_2 0x541 #define WM8994_AIF2_DRC_3 0x542 @@ -1921,6 +1925,44 @@ #define WM8994_LDO2_DISCH_WIDTH 1 /* LDO2_DISCH */ /* + * R61 (0x3D) - MICBIAS1 + */ +#define WM8958_MICB1_RATE 0x0020 /* MICB1_RATE */ +#define WM8958_MICB1_RATE_MASK 0x0020 /* MICB1_RATE */ +#define WM8958_MICB1_RATE_SHIFT 5 /* MICB1_RATE */ +#define WM8958_MICB1_RATE_WIDTH 1 /* MICB1_RATE */ +#define WM8958_MICB1_MODE 0x0010 /* MICB1_MODE */ +#define WM8958_MICB1_MODE_MASK 0x0010 /* MICB1_MODE */ +#define WM8958_MICB1_MODE_SHIFT 4 /* MICB1_MODE */ +#define WM8958_MICB1_MODE_WIDTH 1 /* MICB1_MODE */ +#define WM8958_MICB1_LVL_MASK 0x000E /* MICB1_LVL - [3:1] */ +#define WM8958_MICB1_LVL_SHIFT 1 /* MICB1_LVL - [3:1] */ +#define WM8958_MICB1_LVL_WIDTH 3 /* MICB1_LVL - [3:1] */ +#define WM8958_MICB1_DISCH 0x0001 /* MICB1_DISCH */ +#define WM8958_MICB1_DISCH_MASK 0x0001 /* MICB1_DISCH */ +#define WM8958_MICB1_DISCH_SHIFT 0 /* MICB1_DISCH */ +#define WM8958_MICB1_DISCH_WIDTH 1 /* MICB1_DISCH */ + +/* + * R62 (0x3E) - MICBIAS2 + */ +#define WM8958_MICB2_RATE 0x0020 /* MICB2_RATE */ +#define WM8958_MICB2_RATE_MASK 0x0020 /* MICB2_RATE */ +#define WM8958_MICB2_RATE_SHIFT 5 /* MICB2_RATE */ +#define WM8958_MICB2_RATE_WIDTH 1 /* MICB2_RATE */ +#define WM8958_MICB2_MODE 0x0010 /* MICB2_MODE */ +#define WM8958_MICB2_MODE_MASK 0x0010 /* MICB2_MODE */ +#define WM8958_MICB2_MODE_SHIFT 4 /* MICB2_MODE */ +#define WM8958_MICB2_MODE_WIDTH 1 /* MICB2_MODE */ +#define WM8958_MICB2_LVL_MASK 0x000E /* MICB2_LVL - [3:1] */ +#define WM8958_MICB2_LVL_SHIFT 1 /* MICB2_LVL - [3:1] */ +#define WM8958_MICB2_LVL_WIDTH 3 /* MICB2_LVL - [3:1] */ +#define WM8958_MICB2_DISCH 0x0001 /* MICB2_DISCH */ +#define WM8958_MICB2_DISCH_MASK 0x0001 /* MICB2_DISCH */ +#define WM8958_MICB2_DISCH_SHIFT 0 /* MICB2_DISCH */ +#define WM8958_MICB2_DISCH_WIDTH 1 /* MICB2_DISCH */ + +/* * R76 (0x4C) - Charge Pump (1) */ #define WM8994_CP_ENA 0x8000 /* CP_ENA */ @@ -2027,6 +2069,10 @@ /* * R96 (0x60) - Analogue HP (1) */ +#define WM1811_HPOUT1_ATTN 0x0100 /* HPOUT1_ATTN */ +#define WM1811_HPOUT1_ATTN_MASK 0x0100 /* HPOUT1_ATTN */ +#define WM1811_HPOUT1_ATTN_SHIFT 8 /* HPOUT1_ATTN */ +#define WM1811_HPOUT1_ATTN_WIDTH 1 /* HPOUT1_ATTN */ #define WM8994_HPOUT1L_RMV_SHORT 0x0080 /* HPOUT1L_RMV_SHORT */ #define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080 /* HPOUT1L_RMV_SHORT */ #define WM8994_HPOUT1L_RMV_SHORT_SHIFT 7 /* HPOUT1L_RMV_SHORT */ @@ -2949,6 +2995,34 @@ #define WM8994_AIF1DAC2_3D_ENA_WIDTH 1 /* AIF1DAC2_3D_ENA */ /* + * R1072 (0x430) - AIF1 DAC1 Noise Gate + */ +#define WM8958_AIF1DAC1_NG_HLD_MASK 0x0060 /* AIF1DAC1_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC1_NG_HLD_SHIFT 5 /* AIF1DAC1_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC1_NG_HLD_WIDTH 2 /* AIF1DAC1_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC1_NG_THR_MASK 0x000E /* AIF1DAC1_NG_THR - [3:1] */ +#define WM8958_AIF1DAC1_NG_THR_SHIFT 1 /* AIF1DAC1_NG_THR - [3:1] */ +#define WM8958_AIF1DAC1_NG_THR_WIDTH 3 /* AIF1DAC1_NG_THR - [3:1] */ +#define WM8958_AIF1DAC1_NG_ENA 0x0001 /* AIF1DAC1_NG_ENA */ +#define WM8958_AIF1DAC1_NG_ENA_MASK 0x0001 /* AIF1DAC1_NG_ENA */ +#define WM8958_AIF1DAC1_NG_ENA_SHIFT 0 /* AIF1DAC1_NG_ENA */ +#define WM8958_AIF1DAC1_NG_ENA_WIDTH 1 /* AIF1DAC1_NG_ENA */ + +/* + * R1073 (0x431) - AIF1 DAC2 Noise Gate + */ +#define WM8958_AIF1DAC2_NG_HLD_MASK 0x0060 /* AIF1DAC2_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC2_NG_HLD_SHIFT 5 /* AIF1DAC2_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC2_NG_HLD_WIDTH 2 /* AIF1DAC2_NG_HLD - [6:5] */ +#define WM8958_AIF1DAC2_NG_THR_MASK 0x000E /* AIF1DAC2_NG_THR - [3:1] */ +#define WM8958_AIF1DAC2_NG_THR_SHIFT 1 /* AIF1DAC2_NG_THR - [3:1] */ +#define WM8958_AIF1DAC2_NG_THR_WIDTH 3 /* AIF1DAC2_NG_THR - [3:1] */ +#define WM8958_AIF1DAC2_NG_ENA 0x0001 /* AIF1DAC2_NG_ENA */ +#define WM8958_AIF1DAC2_NG_ENA_MASK 0x0001 /* AIF1DAC2_NG_ENA */ +#define WM8958_AIF1DAC2_NG_ENA_SHIFT 0 /* AIF1DAC2_NG_ENA */ +#define WM8958_AIF1DAC2_NG_ENA_WIDTH 1 /* AIF1DAC2_NG_ENA */ + +/* * R1088 (0x440) - AIF1 DRC1 (1) */ #define WM8994_AIF1DRC1_SIG_DET_RMS_MASK 0xF800 /* AIF1DRC1_SIG_DET_RMS - [15:11] */ @@ -3560,6 +3634,20 @@ #define WM8994_AIF2DAC_3D_ENA_WIDTH 1 /* AIF2DAC_3D_ENA */ /* + * R1328 (0x530) - AIF2 DAC Noise Gate + */ +#define WM8958_AIF2DAC_NG_HLD_MASK 0x0060 /* AIF2DAC_NG_HLD - [6:5] */ +#define WM8958_AIF2DAC_NG_HLD_SHIFT 5 /* AIF2DAC_NG_HLD - [6:5] */ +#define WM8958_AIF2DAC_NG_HLD_WIDTH 2 /* AIF2DAC_NG_HLD - [6:5] */ +#define WM8958_AIF2DAC_NG_THR_MASK 0x000E /* AIF2DAC_NG_THR - [3:1] */ +#define WM8958_AIF2DAC_NG_THR_SHIFT 1 /* AIF2DAC_NG_THR - [3:1] */ +#define WM8958_AIF2DAC_NG_THR_WIDTH 3 /* AIF2DAC_NG_THR - [3:1] */ +#define WM8958_AIF2DAC_NG_ENA 0x0001 /* AIF2DAC_NG_ENA */ +#define WM8958_AIF2DAC_NG_ENA_MASK 0x0001 /* AIF2DAC_NG_ENA */ +#define WM8958_AIF2DAC_NG_ENA_SHIFT 0 /* AIF2DAC_NG_ENA */ +#define WM8958_AIF2DAC_NG_ENA_WIDTH 1 /* AIF2DAC_NG_ENA */ + +/* * R1344 (0x540) - AIF2 DRC (1) */ #define WM8994_AIF2DRC_SIG_DET_RMS_MASK 0xF800 /* AIF2DRC_SIG_DET_RMS - [15:11] */ diff --git a/include/linux/mii.h b/include/linux/mii.h index 103113a2fd18..27748230aa69 100644 --- a/include/linux/mii.h +++ b/include/linux/mii.h @@ -11,131 +11,130 @@ #include <linux/types.h> /* Generic MII registers. */ - -#define MII_BMCR 0x00 /* Basic mode control register */ -#define MII_BMSR 0x01 /* Basic mode status register */ -#define MII_PHYSID1 0x02 /* PHYS ID 1 */ -#define MII_PHYSID2 0x03 /* PHYS ID 2 */ -#define MII_ADVERTISE 0x04 /* Advertisement control reg */ -#define MII_LPA 0x05 /* Link partner ability reg */ -#define MII_EXPANSION 0x06 /* Expansion register */ -#define MII_CTRL1000 0x09 /* 1000BASE-T control */ -#define MII_STAT1000 0x0a /* 1000BASE-T status */ -#define MII_ESTATUS 0x0f /* Extended Status */ -#define MII_DCOUNTER 0x12 /* Disconnect counter */ -#define MII_FCSCOUNTER 0x13 /* False carrier counter */ -#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ -#define MII_RERRCOUNTER 0x15 /* Receive error counter */ -#define MII_SREVISION 0x16 /* Silicon revision */ -#define MII_RESV1 0x17 /* Reserved... */ -#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ -#define MII_PHYADDR 0x19 /* PHY address */ -#define MII_RESV2 0x1a /* Reserved... */ -#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ -#define MII_NCONFIG 0x1c /* Network interface config */ +#define MII_BMCR 0x00 /* Basic mode control register */ +#define MII_BMSR 0x01 /* Basic mode status register */ +#define MII_PHYSID1 0x02 /* PHYS ID 1 */ +#define MII_PHYSID2 0x03 /* PHYS ID 2 */ +#define MII_ADVERTISE 0x04 /* Advertisement control reg */ +#define MII_LPA 0x05 /* Link partner ability reg */ +#define MII_EXPANSION 0x06 /* Expansion register */ +#define MII_CTRL1000 0x09 /* 1000BASE-T control */ +#define MII_STAT1000 0x0a /* 1000BASE-T status */ +#define MII_ESTATUS 0x0f /* Extended Status */ +#define MII_DCOUNTER 0x12 /* Disconnect counter */ +#define MII_FCSCOUNTER 0x13 /* False carrier counter */ +#define MII_NWAYTEST 0x14 /* N-way auto-neg test reg */ +#define MII_RERRCOUNTER 0x15 /* Receive error counter */ +#define MII_SREVISION 0x16 /* Silicon revision */ +#define MII_RESV1 0x17 /* Reserved... */ +#define MII_LBRERROR 0x18 /* Lpback, rx, bypass error */ +#define MII_PHYADDR 0x19 /* PHY address */ +#define MII_RESV2 0x1a /* Reserved... */ +#define MII_TPISTATUS 0x1b /* TPI status for 10mbps */ +#define MII_NCONFIG 0x1c /* Network interface config */ /* Basic mode control register. */ -#define BMCR_RESV 0x003f /* Unused... */ -#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ -#define BMCR_CTST 0x0080 /* Collision test */ -#define BMCR_FULLDPLX 0x0100 /* Full duplex */ -#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ -#define BMCR_ISOLATE 0x0400 /* Disconnect DP83840 from MII */ -#define BMCR_PDOWN 0x0800 /* Powerdown the DP83840 */ -#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ -#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ -#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ -#define BMCR_RESET 0x8000 /* Reset the DP83840 */ +#define BMCR_RESV 0x003f /* Unused... */ +#define BMCR_SPEED1000 0x0040 /* MSB of Speed (1000) */ +#define BMCR_CTST 0x0080 /* Collision test */ +#define BMCR_FULLDPLX 0x0100 /* Full duplex */ +#define BMCR_ANRESTART 0x0200 /* Auto negotiation restart */ +#define BMCR_ISOLATE 0x0400 /* Isolate data paths from MII */ +#define BMCR_PDOWN 0x0800 /* Enable low power state */ +#define BMCR_ANENABLE 0x1000 /* Enable auto negotiation */ +#define BMCR_SPEED100 0x2000 /* Select 100Mbps */ +#define BMCR_LOOPBACK 0x4000 /* TXD loopback bits */ +#define BMCR_RESET 0x8000 /* Reset to default state */ /* Basic mode status register. */ -#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ -#define BMSR_JCD 0x0002 /* Jabber detected */ -#define BMSR_LSTATUS 0x0004 /* Link status */ -#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ -#define BMSR_RFAULT 0x0010 /* Remote fault detected */ -#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ -#define BMSR_RESV 0x00c0 /* Unused... */ -#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ -#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ -#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ -#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ -#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ -#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ -#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ -#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ +#define BMSR_ERCAP 0x0001 /* Ext-reg capability */ +#define BMSR_JCD 0x0002 /* Jabber detected */ +#define BMSR_LSTATUS 0x0004 /* Link status */ +#define BMSR_ANEGCAPABLE 0x0008 /* Able to do auto-negotiation */ +#define BMSR_RFAULT 0x0010 /* Remote fault detected */ +#define BMSR_ANEGCOMPLETE 0x0020 /* Auto-negotiation complete */ +#define BMSR_RESV 0x00c0 /* Unused... */ +#define BMSR_ESTATEN 0x0100 /* Extended Status in R15 */ +#define BMSR_100HALF2 0x0200 /* Can do 100BASE-T2 HDX */ +#define BMSR_100FULL2 0x0400 /* Can do 100BASE-T2 FDX */ +#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */ +#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */ +#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */ +#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */ +#define BMSR_100BASE4 0x8000 /* Can do 100mbps, 4k packets */ /* Advertisement control register. */ -#define ADVERTISE_SLCT 0x001f /* Selector bits */ -#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ -#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ -#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ -#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ -#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ -#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ -#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ -#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ -#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ -#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ -#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ -#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ -#define ADVERTISE_RESV 0x1000 /* Unused... */ -#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ -#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ -#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ - -#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ - ADVERTISE_CSMA) -#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ - ADVERTISE_100HALF | ADVERTISE_100FULL) +#define ADVERTISE_SLCT 0x001f /* Selector bits */ +#define ADVERTISE_CSMA 0x0001 /* Only selector supported */ +#define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */ +#define ADVERTISE_1000XFULL 0x0020 /* Try for 1000BASE-X full-duplex */ +#define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */ +#define ADVERTISE_1000XHALF 0x0040 /* Try for 1000BASE-X half-duplex */ +#define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */ +#define ADVERTISE_1000XPAUSE 0x0080 /* Try for 1000BASE-X pause */ +#define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */ +#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */ +#define ADVERTISE_100BASE4 0x0200 /* Try for 100mbps 4k packets */ +#define ADVERTISE_PAUSE_CAP 0x0400 /* Try for pause */ +#define ADVERTISE_PAUSE_ASYM 0x0800 /* Try for asymetric pause */ +#define ADVERTISE_RESV 0x1000 /* Unused... */ +#define ADVERTISE_RFAULT 0x2000 /* Say we can detect faults */ +#define ADVERTISE_LPACK 0x4000 /* Ack link partners response */ +#define ADVERTISE_NPAGE 0x8000 /* Next page bit */ + +#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \ + ADVERTISE_CSMA) +#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL) /* Link partner ability register. */ -#define LPA_SLCT 0x001f /* Same as advertise selector */ -#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ -#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ -#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ -#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ -#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ -#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ -#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ -#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ -#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ -#define LPA_PAUSE_CAP 0x0400 /* Can pause */ -#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ -#define LPA_RESV 0x1000 /* Unused... */ -#define LPA_RFAULT 0x2000 /* Link partner faulted */ -#define LPA_LPACK 0x4000 /* Link partner acked us */ -#define LPA_NPAGE 0x8000 /* Next page bit */ +#define LPA_SLCT 0x001f /* Same as advertise selector */ +#define LPA_10HALF 0x0020 /* Can do 10mbps half-duplex */ +#define LPA_1000XFULL 0x0020 /* Can do 1000BASE-X full-duplex */ +#define LPA_10FULL 0x0040 /* Can do 10mbps full-duplex */ +#define LPA_1000XHALF 0x0040 /* Can do 1000BASE-X half-duplex */ +#define LPA_100HALF 0x0080 /* Can do 100mbps half-duplex */ +#define LPA_1000XPAUSE 0x0080 /* Can do 1000BASE-X pause */ +#define LPA_100FULL 0x0100 /* Can do 100mbps full-duplex */ +#define LPA_1000XPAUSE_ASYM 0x0100 /* Can do 1000BASE-X pause asym*/ +#define LPA_100BASE4 0x0200 /* Can do 100mbps 4k packets */ +#define LPA_PAUSE_CAP 0x0400 /* Can pause */ +#define LPA_PAUSE_ASYM 0x0800 /* Can pause asymetrically */ +#define LPA_RESV 0x1000 /* Unused... */ +#define LPA_RFAULT 0x2000 /* Link partner faulted */ +#define LPA_LPACK 0x4000 /* Link partner acked us */ +#define LPA_NPAGE 0x8000 /* Next page bit */ #define LPA_DUPLEX (LPA_10FULL | LPA_100FULL) #define LPA_100 (LPA_100FULL | LPA_100HALF | LPA_100BASE4) /* Expansion register for auto-negotiation. */ -#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ -#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ -#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ -#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ -#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ -#define EXPANSION_RESV 0xffe0 /* Unused... */ +#define EXPANSION_NWAY 0x0001 /* Can do N-way auto-nego */ +#define EXPANSION_LCWP 0x0002 /* Got new RX page code word */ +#define EXPANSION_ENABLENPAGE 0x0004 /* This enables npage words */ +#define EXPANSION_NPCAPABLE 0x0008 /* Link partner supports npage */ +#define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ +#define EXPANSION_RESV 0xffe0 /* Unused... */ -#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ -#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ +#define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ +#define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ /* N-way test register. */ -#define NWAYTEST_RESV1 0x00ff /* Unused... */ -#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ -#define NWAYTEST_RESV2 0xfe00 /* Unused... */ +#define NWAYTEST_RESV1 0x00ff /* Unused... */ +#define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ +#define NWAYTEST_RESV2 0xfe00 /* Unused... */ /* 1000BASE-T Control register */ -#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ -#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ +#define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ #define CTL1000_AS_MASTER 0x0800 #define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ -#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ -#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ -#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ -#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ +#define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ +#define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ +#define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ +#define LPA_1000HALF 0x0400 /* Link partner 1000BASE-T half duplex */ /* Flow control flags */ #define FLOW_CTRL_TX 0x01 @@ -149,7 +148,7 @@ struct mii_ioctl_data { __u16 val_out; }; -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include <linux/if.h> @@ -180,7 +179,7 @@ extern unsigned int mii_check_media (struct mii_if_info *mii, unsigned int ok_to_print, unsigned int init_media); extern int generic_mii_ioctl(struct mii_if_info *mii_if, - struct mii_ioctl_data *mii_data, int cmd, + struct mii_ioctl_data *mii_data, int cmd, unsigned int *duplex_changed); @@ -189,7 +188,6 @@ static inline struct mii_ioctl_data *if_mii(struct ifreq *rq) return (struct mii_ioctl_data *) &rq->ifr_ifru; } - /** * mii_nway_result * @negotiated: value of MII ANAR and'd with ANLPAR diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 53ef894bfa05..2366f94a095a 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -75,6 +75,7 @@ enum { MLX4_DEV_CAP_FLAG_UD_MCAST = 1LL << 21, MLX4_DEV_CAP_FLAG_IBOE = 1LL << 30, MLX4_DEV_CAP_FLAG_UC_LOOPBACK = 1LL << 32, + MLX4_DEV_CAP_FLAG_FCS_KEEP = 1LL << 34, MLX4_DEV_CAP_FLAG_WOL = 1LL << 38, MLX4_DEV_CAP_FLAG_UDP_RSS = 1LL << 40, MLX4_DEV_CAP_FLAG_VEP_UC_STEER = 1LL << 41, diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 774b8952deb4..c93d00a6e95d 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -79,9 +79,21 @@ struct page { }; /* Third double word block */ - struct list_head lru; /* Pageout list, eg. active_list + union { + struct list_head lru; /* Pageout list, eg. active_list * protected by zone->lru_lock ! */ + struct { /* slub per cpu partial pages */ + struct page *next; /* Next partial slab */ +#ifdef CONFIG_64BIT + int pages; /* Nr of partial slabs left */ + int pobjects; /* Approximate # of objects */ +#else + short int pages; + short int pobjects; +#endif + }; + }; /* Remainder is not double word aligned */ union { @@ -135,6 +147,17 @@ struct page { #endif ; +struct page_frag { + struct page *page; +#if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536) + __u32 offset; + __u32 size; +#else + __u16 offset; + __u16 size; +#endif +}; + typedef unsigned long __nocast vm_flags_t; /* diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index b460fc2af8a1..415f2db414e1 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -50,8 +50,12 @@ struct mmc_ext_csd { u8 rel_sectors; u8 rel_param; u8 part_config; + u8 cache_ctrl; + u8 rst_n_function; unsigned int part_time; /* Units: ms */ unsigned int sa_timeout; /* Units: 100ns */ + unsigned int generic_cmd6_time; /* Units: 10ms */ + unsigned int power_off_longtime; /* Units: ms */ unsigned int hs_max_dtr; unsigned int sectors; unsigned int card_type; @@ -63,11 +67,15 @@ struct mmc_ext_csd { bool enhanced_area_en; /* enable bit */ unsigned long long enhanced_area_offset; /* Units: Byte */ unsigned int enhanced_area_size; /* Units: KB */ - unsigned int boot_size; /* in bytes */ + unsigned int cache_size; /* Units: KB */ + bool hpi_en; /* HPI enablebit */ + bool hpi; /* HPI support bit */ + unsigned int hpi_cmd; /* cmd used as HPI */ u8 raw_partition_support; /* 160 */ u8 raw_erased_mem_count; /* 181 */ u8 raw_ext_csd_structure; /* 194 */ u8 raw_card_type; /* 196 */ + u8 out_of_int_time; /* 198 */ u8 raw_s_a_timeout; /* 217 */ u8 raw_hc_erase_gap_size; /* 221 */ u8 raw_erase_timeout_mult; /* 223 */ @@ -77,6 +85,9 @@ struct mmc_ext_csd { u8 raw_sec_feature_support;/* 231 */ u8 raw_trim_mult; /* 232 */ u8 raw_sectors[4]; /* 212 - 4 bytes */ + + unsigned int feature_support; +#define MMC_DISCARD_FEATURE BIT(0) /* CMD38 feature */ }; struct sd_scr { @@ -157,6 +168,24 @@ struct sdio_func_tuple; #define SDIO_MAX_FUNCS 7 +/* The number of MMC physical partitions. These consist of: + * boot partitions (2), general purpose partitions (4) in MMC v4.4. + */ +#define MMC_NUM_BOOT_PARTITION 2 +#define MMC_NUM_GP_PARTITION 4 +#define MMC_NUM_PHY_PARTITION 6 +#define MAX_MMC_PART_NAME_LEN 20 + +/* + * MMC Physical partitions + */ +struct mmc_part { + unsigned int size; /* partition size (in bytes) */ + unsigned int part_cfg; /* partition type */ + char name[MAX_MMC_PART_NAME_LEN]; + bool force_ro; /* to make boot parts RO by default */ +}; + /* * MMC device */ @@ -188,6 +217,13 @@ struct mmc_card { #define MMC_QUIRK_DISABLE_CD (1<<5) /* disconnect CD/DAT[3] resistor */ #define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */ #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ +#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ + /* byte mode */ + unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ +#define MMC_NO_POWER_NOTIFICATION 0 +#define MMC_POWERED_ON 1 +#define MMC_POWEROFF_SHORT 2 +#define MMC_POWEROFF_LONG 3 unsigned int erase_size; /* erase size in sectors */ unsigned int erase_shift; /* if erase unit is power 2 */ @@ -216,9 +252,24 @@ struct mmc_card { unsigned int sd_bus_speed; /* Bus Speed Mode set for the card */ struct dentry *debugfs_root; + struct mmc_part part[MMC_NUM_PHY_PARTITION]; /* physical partitions */ + unsigned int nr_parts; }; /* + * This function fill contents in mmc_part. + */ +static inline void mmc_part_add(struct mmc_card *card, unsigned int size, + unsigned int part_cfg, char *name, int idx, bool ro) +{ + card->part[card->nr_parts].size = size; + card->part[card->nr_parts].part_cfg = part_cfg; + sprintf(card->part[card->nr_parts].name, name, idx); + card->part[card->nr_parts].force_ro = ro; + card->nr_parts++; +} + +/* * The world is not perfect and supplies us with broken mmc/sdio devices. * For at least some of these bugs we need a work-around. */ @@ -377,6 +428,11 @@ static inline int mmc_card_nonstd_func_interface(const struct mmc_card *c) return c->quirks & MMC_QUIRK_NONSTD_FUNC_IF; } +static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index b8b1b7a311f1..174a844a5dda 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -136,6 +136,7 @@ struct mmc_async_req; extern struct mmc_async_req *mmc_start_req(struct mmc_host *, struct mmc_async_req *, int *); +extern int mmc_interrupt_hpi(struct mmc_card *); extern void mmc_wait_for_req(struct mmc_host *, struct mmc_request *); extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); extern int mmc_app_cmd(struct mmc_host *, struct mmc_card *); @@ -146,6 +147,7 @@ extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int); #define MMC_ERASE_ARG 0x00000000 #define MMC_SECURE_ERASE_ARG 0x80000000 #define MMC_TRIM_ARG 0x00000001 +#define MMC_DISCARD_ARG 0x00000003 #define MMC_SECURE_TRIM1_ARG 0x80000001 #define MMC_SECURE_TRIM2_ARG 0x80008000 @@ -156,12 +158,17 @@ extern int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr, unsigned int arg); extern int mmc_can_erase(struct mmc_card *card); extern int mmc_can_trim(struct mmc_card *card); +extern int mmc_can_discard(struct mmc_card *card); +extern int mmc_can_sanitize(struct mmc_card *card); extern int mmc_can_secure_erase_trim(struct mmc_card *card); extern int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, unsigned int nr); extern unsigned int mmc_calc_max_discard(struct mmc_card *card); extern int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen); +extern int mmc_hw_reset(struct mmc_host *host); +extern int mmc_hw_reset_check(struct mmc_host *host); +extern int mmc_can_reset(struct mmc_card *card); extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *); extern unsigned int mmc_align_data_size(struct mmc_card *, unsigned int); @@ -171,6 +178,8 @@ extern void mmc_release_host(struct mmc_host *host); extern void mmc_do_release_host(struct mmc_host *host); extern int mmc_try_claim_host(struct mmc_host *host); +extern int mmc_flush_cache(struct mmc_card *); + /** * mmc_claim_host - exclusively claim a host * @host: mmc host to claim diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 6b46819705d1..6dc9b80568a0 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -72,6 +72,8 @@ struct mmc_data; * rate and timeout calculations. * @current_speed: Configured rate of the controller. * @num_slots: Number of slots available. + * @verid: Denote Version ID. + * @data_offset: Set the offset of DATA register according to VERID. * @pdev: Platform device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. * @slot: Slots sharing this MMC controller. @@ -147,6 +149,8 @@ struct dw_mci { u32 current_speed; u32 num_slots; u32 fifoth_val; + u16 verid; + u16 data_offset; struct platform_device *pdev; struct dw_mci_board *pdata; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 1d09562ccf73..a3ac9c48e5de 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -12,6 +12,7 @@ #include <linux/leds.h> #include <linux/sched.h> +#include <linux/fault-inject.h> #include <linux/mmc/core.h> #include <linux/mmc/pm.h> @@ -108,6 +109,9 @@ struct mmc_host_ops { * It is optional for the host to implement pre_req and post_req in * order to support double buffering of requests (prepare one * request while another request is active). + * pre_req() must always be followed by a post_req(). + * To undo a call made to pre_req(), call post_req() with + * a nonzero err condition. */ void (*post_req)(struct mmc_host *host, struct mmc_request *req, int err); @@ -147,6 +151,7 @@ struct mmc_host_ops { int (*execute_tuning)(struct mmc_host *host); void (*enable_preset_value)(struct mmc_host *host, bool enable); int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); + void (*hw_reset)(struct mmc_host *host); }; struct mmc_card; @@ -229,8 +234,20 @@ struct mmc_host { #define MMC_CAP_MAX_CURRENT_600 (1 << 28) /* Host max current limit is 600mA */ #define MMC_CAP_MAX_CURRENT_800 (1 << 29) /* Host max current limit is 800mA */ #define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ +#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ + + unsigned int caps2; /* More host capabilities */ + +#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_POWEROFF_NOTIFY (1 << 2) /* Notify poweroff supported */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock reads don't work */ mmc_pm_flag_t pm_caps; /* supported pm features */ + unsigned int power_notify_type; +#define MMC_HOST_PW_NOTIFY_NONE 0 +#define MMC_HOST_PW_NOTIFY_SHORT 1 +#define MMC_HOST_PW_NOTIFY_LONG 2 #ifdef CONFIG_MMC_CLKGATE int clk_requests; /* internal reference counter */ @@ -302,6 +319,10 @@ struct mmc_host { struct mmc_async_req *areq; /* active async req */ +#ifdef CONFIG_FAIL_MMC_REQUEST + struct fault_attr fail_mmc_request; +#endif + unsigned long private[0] ____cacheline_aligned; }; @@ -330,6 +351,8 @@ extern int mmc_power_restore_host(struct mmc_host *host); extern void mmc_detect_change(struct mmc_host *, unsigned long delay); extern void mmc_request_done(struct mmc_host *, struct mmc_request *); +extern int mmc_cache_ctrl(struct mmc_host *, u8); + static inline void mmc_signal_sdio_irq(struct mmc_host *host) { host->ops->enable_sdio_irq(host, 0); @@ -394,4 +417,10 @@ static inline int mmc_host_cmd23(struct mmc_host *host) { return host->caps & MMC_CAP_CMD23; } + +static inline int mmc_boot_partition_access(struct mmc_host *host) +{ + return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); +} + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index 5a794cb503ea..0e7135697d11 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -270,18 +270,31 @@ struct _mmc_csd { * EXT_CSD fields */ +#define EXT_CSD_FLUSH_CACHE 32 /* W */ +#define EXT_CSD_CACHE_CTRL 33 /* R/W */ +#define EXT_CSD_POWER_OFF_NOTIFICATION 34 /* R/W */ +#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */ #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */ #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */ +#define EXT_CSD_HPI_MGMT 161 /* R/W */ +#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */ +#define EXT_CSD_SANITIZE_START 165 /* W */ #define EXT_CSD_WR_REL_PARAM 166 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ #define EXT_CSD_PART_CONFIG 179 /* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181 /* RO */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_POWER_CLASS 187 /* R/W */ #define EXT_CSD_REV 192 /* RO */ #define EXT_CSD_STRUCTURE 194 /* RO */ #define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_OUT_OF_INTERRUPT_TIME 198 /* RO */ #define EXT_CSD_PART_SWITCH_TIME 199 /* RO */ +#define EXT_CSD_PWR_CL_52_195 200 /* RO */ +#define EXT_CSD_PWR_CL_26_195 201 /* RO */ +#define EXT_CSD_PWR_CL_52_360 202 /* RO */ +#define EXT_CSD_PWR_CL_26_360 203 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_S_A_TIMEOUT 217 /* RO */ #define EXT_CSD_REL_WR_SEC_C 222 /* RO */ @@ -293,6 +306,14 @@ struct _mmc_csd { #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ #define EXT_CSD_TRIM_MULT 232 /* RO */ +#define EXT_CSD_PWR_CL_200_195 236 /* RO */ +#define EXT_CSD_PWR_CL_200_360 237 /* RO */ +#define EXT_CSD_PWR_CL_DDR_52_195 238 /* RO */ +#define EXT_CSD_PWR_CL_DDR_52_360 239 /* RO */ +#define EXT_CSD_POWER_OFF_LONG_TIME 247 /* RO */ +#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */ +#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */ +#define EXT_CSD_HPI_FEATURES 503 /* RO */ /* * EXT_CSD field definitions @@ -302,7 +323,9 @@ struct _mmc_csd { #define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) #define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) -#define EXT_CSD_PART_CONFIG_ACC_BOOT1 (0x2) +#define EXT_CSD_PART_CONFIG_ACC_GP0 (0x4) + +#define EXT_CSD_PART_SUPPORT_PART_EN (0x1) #define EXT_CSD_CMD_SET_NORMAL (1<<0) #define EXT_CSD_CMD_SET_SECURE (1<<1) @@ -327,7 +350,20 @@ struct _mmc_csd { #define EXT_CSD_SEC_ER_EN BIT(0) #define EXT_CSD_SEC_BD_BLK_EN BIT(2) #define EXT_CSD_SEC_GB_CL_EN BIT(4) +#define EXT_CSD_SEC_SANITIZE BIT(6) /* v4.5 only */ + +#define EXT_CSD_RST_N_EN_MASK 0x3 +#define EXT_CSD_RST_N_ENABLED 1 /* RST_n is enabled on card */ + +#define EXT_CSD_NO_POWER_NOTIFICATION 0 +#define EXT_CSD_POWER_ON 1 +#define EXT_CSD_POWER_OFF_SHORT 2 +#define EXT_CSD_POWER_OFF_LONG 3 +#define EXT_CSD_PWR_CL_8BIT_MASK 0xF0 /* 8 bit PWR CLS */ +#define EXT_CSD_PWR_CL_4BIT_MASK 0x0F /* 8 bit PWR CLS */ +#define EXT_CSD_PWR_CL_8BIT_SHIFT 4 +#define EXT_CSD_PWR_CL_4BIT_SHIFT 0 /* * MMC_SWITCH access modes */ diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h index 5666f3abfab7..e4b69353678d 100644 --- a/include/linux/mmc/sdhci.h +++ b/include/linux/mmc/sdhci.h @@ -88,6 +88,10 @@ struct sdhci_host { /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) + unsigned int quirks2; /* More deviations from spec. */ + +#define SDHCI_QUIRK2_OWN_CARD_DETECTION (1<<0) + int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ @@ -115,6 +119,8 @@ struct sdhci_host { #define SDHCI_NEEDS_RETUNING (1<<5) /* Host needs retuning */ #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ +#define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ +#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ unsigned int version; /* SDHCI spec. version */ @@ -125,6 +131,8 @@ struct sdhci_host { unsigned int clock; /* Current clock (MHz) */ u8 pwr; /* Current voltage */ + bool runtime_suspended; /* Host is runtime suspended */ + struct mmc_request *mrq; /* Current request */ struct mmc_command *cmd; /* Current command */ struct mmc_data *data; /* Current data request */ diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 2a2e9905a247..e0b1123497b9 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -72,11 +72,13 @@ #define SDIO_CCCR_REV_1_00 0 /* CCCR/FBR Version 1.00 */ #define SDIO_CCCR_REV_1_10 1 /* CCCR/FBR Version 1.10 */ #define SDIO_CCCR_REV_1_20 2 /* CCCR/FBR Version 1.20 */ +#define SDIO_CCCR_REV_3_00 3 /* CCCR/FBR Version 3.00 */ #define SDIO_SDIO_REV_1_00 0 /* SDIO Spec Version 1.00 */ #define SDIO_SDIO_REV_1_10 1 /* SDIO Spec Version 1.10 */ #define SDIO_SDIO_REV_1_20 2 /* SDIO Spec Version 1.20 */ #define SDIO_SDIO_REV_2_00 3 /* SDIO Spec Version 2.00 */ +#define SDIO_SDIO_REV_3_00 4 /* SDIO Spec Version 3.00 */ #define SDIO_CCCR_SD 0x01 diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h index 0222cd8ebe76..04ff452bf5c3 100644 --- a/include/linux/mmc/sh_mmcif.h +++ b/include/linux/mmc/sh_mmcif.h @@ -41,7 +41,9 @@ struct sh_mmcif_plat_data { void (*set_pwr)(struct platform_device *pdev, int state); void (*down_pwr)(struct platform_device *pdev); int (*get_cd)(struct platform_device *pdef); - struct sh_mmcif_dma *dma; + struct sh_mmcif_dma *dma; /* Deprecated. Instead */ + unsigned int slave_id_tx; /* use embedded slave_id_[tr]x */ + unsigned int slave_id_rx; u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ unsigned long caps; u32 ocr; diff --git a/include/linux/mmc/sh_mobile_sdhi.h b/include/linux/mmc/sh_mobile_sdhi.h index bd50b365167f..71b805451bd8 100644 --- a/include/linux/mmc/sh_mobile_sdhi.h +++ b/include/linux/mmc/sh_mobile_sdhi.h @@ -6,6 +6,10 @@ struct platform_device; struct tmio_mmc_data; +#define SH_MOBILE_SDHI_IRQ_CARD_DETECT "card_detect" +#define SH_MOBILE_SDHI_IRQ_SDCARD "sdcard" +#define SH_MOBILE_SDHI_IRQ_SDIO "sdio" + struct sh_mobile_sdhi_info { int dma_slave_tx; int dma_slave_rx; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index ae28e93fd072..468819cdde87 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -405,6 +405,15 @@ struct virtio_device_id { }; #define VIRTIO_DEV_ANY_ID 0xffffffff +/* + * For Hyper-V devices we use the device guid as the id. + */ +struct hv_vmbus_device_id { + __u8 guid[16]; + kernel_ulong_t driver_data /* Data private to the driver */ + __attribute__((aligned(sizeof(kernel_ulong_t)))); +}; + /* i2c */ #define I2C_NAME_SIZE 20 diff --git a/include/linux/module.h b/include/linux/module.h index 1c30087a2d81..863921637d9f 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -580,9 +580,6 @@ int unregister_module_notifier(struct notifier_block * nb); extern void print_modules(void); -extern void module_update_tracepoints(void); -extern int module_get_iter_tracepoints(struct tracepoint_iter *iter); - #else /* !CONFIG_MODULES... */ #define EXPORT_SYMBOL(sym) #define EXPORT_SYMBOL_GPL(sym) @@ -698,15 +695,6 @@ static inline int unregister_module_notifier(struct notifier_block * nb) static inline void print_modules(void) { } - -static inline void module_update_tracepoints(void) -{ -} - -static inline int module_get_iter_tracepoints(struct tracepoint_iter *iter) -{ - return 0; -} #endif /* CONFIG_MODULES */ #ifdef CONFIG_SYSFS diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index ddaae98c53f9..fffb10bd5514 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -262,6 +262,26 @@ static inline void __kernel_param_unlock(void) .str = &__param_string_##name, 0, perm); \ __MODULE_PARM_TYPE(name, "string") +/** + * parameq - checks if two parameter names match + * @name1: parameter name 1 + * @name2: parameter name 2 + * + * Returns true if the two parameter names are equal. + * Dashes (-) are considered equal to underscores (_). + */ +extern bool parameq(const char *name1, const char *name2); + +/** + * parameqn - checks if two parameter names match + * @name1: parameter name 1 + * @name2: parameter name 2 + * @n: the length to compare + * + * Similar to parameq(), except it compares @n characters. + */ +extern bool parameqn(const char *name1, const char *name2, size_t n); + /* Called on module insert or kernel boot */ extern int parse_args(const char *name, char *args, diff --git a/include/linux/net_tstamp.h b/include/linux/net_tstamp.h index a3b8546354ac..ae5df122e42f 100644 --- a/include/linux/net_tstamp.h +++ b/include/linux/net_tstamp.h @@ -45,7 +45,7 @@ struct hwtstamp_config { }; /* possible values for hwtstamp_config->tx_type */ -enum { +enum hwtstamp_tx_types { /* * No outgoing packet will need hardware time stamping; * should a packet arrive which asks for it, no hardware @@ -60,10 +60,19 @@ enum { * before sending the packet. */ HWTSTAMP_TX_ON, + + /* + * Enables time stamping for outgoing packets just as + * HWTSTAMP_TX_ON does, but also enables time stamp insertion + * directly into Sync packets. In this case, transmitted Sync + * packets will not received a time stamp via the socket error + * queue. + */ + HWTSTAMP_TX_ONESTEP_SYNC, }; /* possible values for hwtstamp_config->rx_filter */ -enum { +enum hwtstamp_rx_filters { /* time stamp no incoming packet at all */ HWTSTAMP_FILTER_NONE, diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ddee79bb8f15..df1c836e6948 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -31,7 +31,7 @@ #include <linux/if_link.h> #ifdef __KERNEL__ -#include <linux/pm_qos_params.h> +#include <linux/pm_qos.h> #include <linux/timer.h> #include <linux/delay.h> #include <linux/atomic.h> @@ -723,9 +723,8 @@ struct netdev_tc_txq { * * void (*ndo_set_rx_mode)(struct net_device *dev); * This function is called device changes address list filtering. - * - * void (*ndo_set_multicast_list)(struct net_device *dev); - * This function is called when the multicast address list changes. + * If driver handles unicast address filtering, it should set + * IFF_UNICAST_FLT to its priv_flags. * * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); * This function is called when the Media Access Control address @@ -782,6 +781,7 @@ struct netdev_tc_txq { * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac); * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos); * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate); + * int (*ndo_set_vf_spoofchk)(struct net_device *dev, int vf, bool setting); * int (*ndo_get_vf_config)(struct net_device *dev, * int vf, struct ifla_vf_info *ivf); * int (*ndo_set_vf_port)(struct net_device *dev, int vf, @@ -868,7 +868,6 @@ struct net_device_ops { void (*ndo_change_rx_flags)(struct net_device *dev, int flags); void (*ndo_set_rx_mode)(struct net_device *dev); - void (*ndo_set_multicast_list)(struct net_device *dev); int (*ndo_set_mac_address)(struct net_device *dev, void *addr); int (*ndo_validate_addr)(struct net_device *dev); @@ -902,6 +901,8 @@ struct net_device_ops { int queue, u16 vlan, u8 qos); int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate); + int (*ndo_set_vf_spoofchk)(struct net_device *dev, + int vf, bool setting); int (*ndo_get_vf_config)(struct net_device *dev, int vf, struct ifla_vf_info *ivf); @@ -924,11 +925,15 @@ struct net_device_ops { u16 xid, struct scatterlist *sgl, unsigned int sgc); +#endif + +#if defined(CONFIG_LIBFCOE) || defined(CONFIG_LIBFCOE_MODULE) #define NETDEV_FCOE_WWNN 0 #define NETDEV_FCOE_WWPN 1 int (*ndo_fcoe_get_wwn)(struct net_device *dev, u64 *wwn, int type); #endif + #ifdef CONFIG_RFS_ACCEL int (*ndo_rx_flow_steer)(struct net_device *dev, const struct sk_buff *skb, @@ -964,7 +969,7 @@ struct net_device { */ char name[IFNAMSIZ]; - struct pm_qos_request_list pm_qos_req; + struct pm_qos_request pm_qos_req; /* device name hash chain */ struct hlist_node name_hlist; @@ -2587,9 +2592,6 @@ static inline int netif_is_bond_slave(struct net_device *dev) extern struct pernet_operations __net_initdata loopback_net_ops; -int dev_ethtool_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd); - static inline u32 dev_ethtool_get_rx_csum(struct net_device *dev) { if (dev->features & NETIF_F_RXCSUM) @@ -2617,6 +2619,9 @@ static inline const char *netdev_name(const struct net_device *dev) return dev->name; } +extern int __netdev_printk(const char *level, const struct net_device *dev, + struct va_format *vaf); + extern int netdev_printk(const char *level, const struct net_device *dev, const char *format, ...) __attribute__ ((format (printf, 3, 4))); @@ -2644,8 +2649,7 @@ extern int netdev_info(const struct net_device *dev, const char *format, ...) #elif defined(CONFIG_DYNAMIC_DEBUG) #define netdev_dbg(__dev, format, args...) \ do { \ - dynamic_dev_dbg((__dev)->dev.parent, "%s: " format, \ - netdev_name(__dev), ##args); \ + dynamic_netdev_dbg(__dev, format, ##args); \ } while (0) #else #define netdev_dbg(__dev, format, args...) \ @@ -2712,9 +2716,7 @@ do { \ #define netif_dbg(priv, type, netdev, format, args...) \ do { \ if (netif_msg_##type(priv)) \ - dynamic_dev_dbg((netdev)->dev.parent, \ - "%s: " format, \ - netdev_name(netdev), ##args); \ + dynamic_netdev_dbg(netdev, format, ##args); \ } while (0) #else #define netif_dbg(priv, type, dev, format, args...) \ diff --git a/include/linux/netfilter/xt_connlimit.h b/include/linux/netfilter/xt_connlimit.h index 0ca66e97acbc..d1366f05d1b2 100644 --- a/include/linux/netfilter/xt_connlimit.h +++ b/include/linux/netfilter/xt_connlimit.h @@ -2,6 +2,7 @@ #define _XT_CONNLIMIT_H #include <linux/types.h> +#include <linux/netfilter.h> struct xt_connlimit_data; diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h index 74b904d8f99c..e3c041d54020 100644 --- a/include/linux/netfilter/xt_conntrack.h +++ b/include/linux/netfilter/xt_conntrack.h @@ -6,6 +6,7 @@ #define _XT_CONNTRACK_H #include <linux/types.h> +#include <linux/netfilter.h> #include <linux/netfilter/nf_conntrack_tuple_common.h> #define XT_CONNTRACK_STATE_BIT(ctinfo) (1 << ((ctinfo)%IP_CT_IS_REPLY+1)) diff --git a/include/linux/netfilter/xt_iprange.h b/include/linux/netfilter/xt_iprange.h index c1f21a779a45..25fd7cf851f0 100644 --- a/include/linux/netfilter/xt_iprange.h +++ b/include/linux/netfilter/xt_iprange.h @@ -2,6 +2,7 @@ #define _LINUX_NETFILTER_XT_IPRANGE_H 1 #include <linux/types.h> +#include <linux/netfilter.h> enum { IPRANGE_SRC = 1 << 0, /* match source IP address */ diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h index adbf4bff87ed..e08565d45178 100644 --- a/include/linux/netfilter_arp/arp_tables.h +++ b/include/linux/netfilter_arp/arp_tables.h @@ -52,7 +52,7 @@ struct arpt_arp { struct in_addr smsk, tmsk; /* Device hw address length, src+target device addresses */ - u_int8_t arhln, arhln_mask; + __u8 arhln, arhln_mask; struct arpt_devaddr_info src_devaddr; struct arpt_devaddr_info tgt_devaddr; @@ -71,9 +71,9 @@ struct arpt_arp { unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int16_t invflags; + __u16 invflags; }; /* Values for "flag" field in struct arpt_ip (general arp structure). @@ -102,9 +102,9 @@ struct arpt_entry struct arpt_arp arp; /* Size of arpt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of arpt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -260,8 +260,8 @@ extern unsigned int arpt_do_table(struct sk_buff *skb, struct compat_arpt_entry { struct arpt_arp arp; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netfilter_decnet.h b/include/linux/netfilter_decnet.h index 6f425369ee29..0b09732aacd5 100644 --- a/include/linux/netfilter_decnet.h +++ b/include/linux/netfilter_decnet.h @@ -11,6 +11,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_DN_SRC 0x0001 diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index 29c7727ff0e8..fa0946c549d3 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -9,6 +9,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_IP_SRC 0x0001 diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 64a5d95c58e8..db79231914ce 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -81,12 +81,12 @@ struct ipt_ip { unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ]; /* Protocol, 0 = ANY */ - u_int16_t proto; + __u16 proto; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int8_t invflags; + __u8 invflags; }; /* Values for "flag" field in struct ipt_ip (general ip structure). */ @@ -114,9 +114,9 @@ struct ipt_entry { unsigned int nfcache; /* Size of ipt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of ipt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -149,9 +149,9 @@ struct ipt_entry { /* ICMP matching stuff */ struct ipt_icmp { - u_int8_t type; /* type to match */ - u_int8_t code[2]; /* range of code */ - u_int8_t invflags; /* Inverse flags */ + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ }; /* Values for "inv" field for struct ipt_icmp. */ @@ -288,8 +288,8 @@ extern unsigned int ipt_do_table(struct sk_buff *skb, struct compat_ipt_entry { struct ipt_ip ip; compat_uint_t nfcache; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 1f7e300094cd..57c025127f1d 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -12,6 +12,9 @@ /* only for userspace compatibility */ #ifndef __KERNEL__ + +#include <limits.h> /* for INT_MIN, INT_MAX */ + /* IP Cache bits. */ /* Src IP address. */ #define NFC_IP6_SRC 0x0001 diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h index c9784f7a9c1f..f549adccc94c 100644 --- a/include/linux/netfilter_ipv6/ip6_tables.h +++ b/include/linux/netfilter_ipv6/ip6_tables.h @@ -81,14 +81,14 @@ struct ip6t_ip6 { * MH do not match any packets. * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol. */ - u_int16_t proto; + __u16 proto; /* TOS to match iff flags & IP6T_F_TOS */ - u_int8_t tos; + __u8 tos; /* Flags word */ - u_int8_t flags; + __u8 flags; /* Inverse flags */ - u_int8_t invflags; + __u8 invflags; }; /* Values for "flag" field in struct ip6t_ip6 (general ip6 structure). */ @@ -118,9 +118,9 @@ struct ip6t_entry { unsigned int nfcache; /* Size of ipt_entry + matches */ - u_int16_t target_offset; + __u16 target_offset; /* Size of ipt_entry + matches + target */ - u_int16_t next_offset; + __u16 next_offset; /* Back pointer */ unsigned int comefrom; @@ -186,9 +186,9 @@ struct ip6t_error { /* ICMP matching stuff */ struct ip6t_icmp { - u_int8_t type; /* type to match */ - u_int8_t code[2]; /* range of code */ - u_int8_t invflags; /* Inverse flags */ + __u8 type; /* type to match */ + __u8 code[2]; /* range of code */ + __u8 invflags; /* Inverse flags */ }; /* Values for "inv" field for struct ipt_icmp. */ @@ -298,8 +298,8 @@ extern int ipv6_find_hdr(const struct sk_buff *skb, unsigned int *offset, struct compat_ip6t_entry { struct ip6t_ip6 ipv6; compat_uint_t nfcache; - u_int16_t target_offset; - u_int16_t next_offset; + __u16 target_offset; + __u16 next_offset; compat_uint_t comefrom; struct compat_xt_counters counters; unsigned char elems[0]; diff --git a/include/linux/netlink.h b/include/linux/netlink.h index 180540a84d37..8180cd9d73d5 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -1,7 +1,7 @@ #ifndef __LINUX_NETLINK_H #define __LINUX_NETLINK_H -#include <linux/socket.h> /* for sa_family_t */ +#include <linux/socket.h> /* for __kernel_sa_family_t */ #include <linux/types.h> #define NETLINK_ROUTE 0 /* Routing/device hook */ diff --git a/include/linux/netrom.h b/include/linux/netrom.h index 6939b32f66a0..af7313cc9cb6 100644 --- a/include/linux/netrom.h +++ b/include/linux/netrom.h @@ -7,6 +7,8 @@ #ifndef NETROM_KERNEL_H #define NETROM_KERNEL_H +#include <linux/ax25.h> + #define NETROM_MTU 236 #define NETROM_T1 1 diff --git a/include/linux/nfc.h b/include/linux/nfc.h index 330a4c5db588..36cb955b05cc 100644 --- a/include/linux/nfc.h +++ b/include/linux/nfc.h @@ -39,6 +39,10 @@ * * @NFC_CMD_GET_DEVICE: request information about a device (requires * %NFC_ATTR_DEVICE_INDEX) or dump request to get a list of all nfc devices + * @NFC_CMD_DEV_UP: turn on the nfc device + * (requires %NFC_ATTR_DEVICE_INDEX) + * @NFC_CMD_DEV_DOWN: turn off the nfc device + * (requires %NFC_ATTR_DEVICE_INDEX) * @NFC_CMD_START_POLL: start polling for targets using the given protocols * (requires %NFC_ATTR_DEVICE_INDEX and %NFC_ATTR_PROTOCOLS) * @NFC_CMD_STOP_POLL: stop polling for targets (requires @@ -56,6 +60,8 @@ enum nfc_commands { NFC_CMD_UNSPEC, NFC_CMD_GET_DEVICE, + NFC_CMD_DEV_UP, + NFC_CMD_DEV_DOWN, NFC_CMD_START_POLL, NFC_CMD_STOP_POLL, NFC_CMD_GET_TARGET, @@ -123,4 +129,6 @@ struct sockaddr_nfc { #define NFC_SOCKPROTO_RAW 0 #define NFC_SOCKPROTO_MAX 1 +#define NFC_HEADER_SIZE 1 + #endif /*__LINUX_NFC_H */ diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 76f99e8714f3..32345c2805c0 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -373,6 +373,22 @@ enum nfsstat4 { NFS4ERR_DELEG_REVOKED = 10087, /* deleg./layout revoked */ }; +static inline bool seqid_mutating_err(u32 err) +{ + /* rfc 3530 section 8.1.5: */ + switch (err) { + case NFS4ERR_STALE_CLIENTID: + case NFS4ERR_STALE_STATEID: + case NFS4ERR_BAD_STATEID: + case NFS4ERR_BAD_SEQID: + case NFS4ERR_BADXDR: + case NFS4ERR_RESOURCE: + case NFS4ERR_NOFILEHANDLE: + return false; + }; + return true; +} + /* * Note: NF4BAD is not actually part of the protocol; it is just used * internally by nfsd. @@ -394,7 +410,10 @@ enum open_claim_type4 { NFS4_OPEN_CLAIM_NULL = 0, NFS4_OPEN_CLAIM_PREVIOUS = 1, NFS4_OPEN_CLAIM_DELEGATE_CUR = 2, - NFS4_OPEN_CLAIM_DELEGATE_PREV = 3 + NFS4_OPEN_CLAIM_DELEGATE_PREV = 3, + NFS4_OPEN_CLAIM_FH = 4, /* 4.1 */ + NFS4_OPEN_CLAIM_DELEG_CUR_FH = 5, /* 4.1 */ + NFS4_OPEN_CLAIM_DELEG_PREV_FH = 6, /* 4.1 */ }; enum opentype4 { diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index eaac770f886e..60a137b7f171 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -149,7 +149,6 @@ struct nfs_inode { unsigned long read_cache_jiffies; unsigned long attrtimeo; unsigned long attrtimeo_timestamp; - __u64 change_attr; /* v4 only */ unsigned long attr_gencount; /* "Generation counter" for the attribute cache. This is diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index e2791a27a901..ab465fe8c3d6 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -34,6 +34,7 @@ enum { PG_NEED_COMMIT, PG_NEED_RESCHED, PG_PNFS_COMMIT, + PG_PARTIAL_READ_FAILED, }; struct nfs_inode; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index abd615d74a29..c74595ba7094 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1133,7 +1133,6 @@ struct nfs_page; #define NFS_PAGEVEC_SIZE (8U) struct nfs_read_data { - int flags; struct rpc_task task; struct inode *inode; struct rpc_cred *cred; @@ -1156,7 +1155,6 @@ struct nfs_read_data { }; struct nfs_write_data { - int flags; struct rpc_task task; struct inode *inode; struct rpc_cred *cred; @@ -1197,9 +1195,6 @@ struct nfs_rpc_ops { int (*getroot) (struct nfs_server *, struct nfs_fh *, struct nfs_fsinfo *); - int (*lookupfh)(struct nfs_server *, struct nfs_fh *, - struct qstr *, struct nfs_fh *, - struct nfs_fattr *); int (*getattr) (struct nfs_server *, struct nfs_fh *, struct nfs_fattr *); int (*setattr) (struct dentry *, struct nfs_fattr *, diff --git a/include/linux/nfsd/Kbuild b/include/linux/nfsd/Kbuild index 55d1467de3c1..b8d4001212b3 100644 --- a/include/linux/nfsd/Kbuild +++ b/include/linux/nfsd/Kbuild @@ -1,6 +1,4 @@ -header-y += const.h header-y += debug.h header-y += export.h header-y += nfsfh.h header-y += stats.h -header-y += syscall.h diff --git a/include/linux/nfsd/const.h b/include/linux/nfsd/const.h deleted file mode 100644 index 323f8cfa060a..000000000000 --- a/include/linux/nfsd/const.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/linux/nfsd/const.h - * - * Various constants related to NFS. - * - * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de> - */ - -#ifndef _LINUX_NFSD_CONST_H -#define _LINUX_NFSD_CONST_H - -#include <linux/nfs.h> -#include <linux/nfs2.h> -#include <linux/nfs3.h> -#include <linux/nfs4.h> - -/* - * Maximum protocol version supported by knfsd - */ -#define NFSSVC_MAXVERS 3 - -/* - * Maximum blocksizes supported by daemon under various circumstances. - */ -#define NFSSVC_MAXBLKSIZE RPCSVC_MAXPAYLOAD -/* NFSv2 is limited by the protocol specification, see RFC 1094 */ -#define NFSSVC_MAXBLKSIZE_V2 (8*1024) - -#ifdef __KERNEL__ - -#include <linux/sunrpc/msg_prot.h> - -/* - * Largest number of bytes we need to allocate for an NFS - * call or reply. Used to control buffer sizes. We use - * the length of v3 WRITE, READDIR and READDIR replies - * which are an RPC header, up to 26 XDR units of reply - * data, and some page data. - * - * Note that accuracy here doesn't matter too much as the - * size is rounded up to a page size when allocating space. - */ -#define NFSD_BUFSIZE ((RPC_MAX_HEADER_WITH_AUTH+26)*XDR_UNIT + NFSSVC_MAXBLKSIZE) - -#ifdef CONFIG_NFSD_V4 -# define NFSSVC_XDRSIZE NFS4_SVC_XDRSIZE -#elif defined(CONFIG_NFSD_V3) -# define NFSSVC_XDRSIZE NFS3_SVC_XDRSIZE -#else -# define NFSSVC_XDRSIZE NFS2_SVC_XDRSIZE -#endif - -#endif /* __KERNEL__ */ - -#endif /* _LINUX_NFSD_CONST_H */ diff --git a/include/linux/nfsd/export.h b/include/linux/nfsd/export.h index 8a31a20efe7e..f85308e688fd 100644 --- a/include/linux/nfsd/export.h +++ b/include/linux/nfsd/export.h @@ -96,7 +96,6 @@ struct svc_export { struct auth_domain * ex_client; int ex_flags; struct path ex_path; - char *ex_pathname; uid_t ex_anon_uid; gid_t ex_anon_gid; int ex_fsid; @@ -137,6 +136,7 @@ struct svc_export * rqst_exp_get_by_name(struct svc_rqst *, struct path *); struct svc_export * rqst_exp_parent(struct svc_rqst *, struct path *); +struct svc_export * rqst_find_fsidzero_export(struct svc_rqst *); int exp_rootfh(struct auth_domain *, char *path, struct knfsd_fh *, int maxsize); __be32 exp_pseudoroot(struct svc_rqst *, struct svc_fh *); diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index f76d80ccec10..ce4743a26015 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -14,11 +14,14 @@ #ifndef _LINUX_NFSD_FH_H #define _LINUX_NFSD_FH_H -# include <linux/types.h> +#include <linux/types.h> +#include <linux/nfs.h> +#include <linux/nfs2.h> +#include <linux/nfs3.h> +#include <linux/nfs4.h> #ifdef __KERNEL__ # include <linux/sunrpc/svc.h> #endif -#include <linux/nfsd/const.h> /* * This is the old "dentry style" Linux NFSv2 file handle. diff --git a/include/linux/nfsd/syscall.h b/include/linux/nfsd/syscall.h deleted file mode 100644 index 812bc1e160dc..000000000000 --- a/include/linux/nfsd/syscall.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * include/linux/nfsd/syscall.h - * - * This file holds all declarations for the knfsd syscall interface. - * - * Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de> - */ - -#ifndef NFSD_SYSCALL_H -#define NFSD_SYSCALL_H - -#include <linux/types.h> -#include <linux/nfsd/export.h> - -/* - * Version of the syscall interface - */ -#define NFSCTL_VERSION 0x0201 - -/* - * These are the commands understood by nfsctl(). - */ -#define NFSCTL_SVC 0 /* This is a server process. */ -#define NFSCTL_ADDCLIENT 1 /* Add an NFS client. */ -#define NFSCTL_DELCLIENT 2 /* Remove an NFS client. */ -#define NFSCTL_EXPORT 3 /* export a file system. */ -#define NFSCTL_UNEXPORT 4 /* unexport a file system. */ -/*#define NFSCTL_UGIDUPDATE 5 / * update a client's uid/gid map. DISCARDED */ -/*#define NFSCTL_GETFH 6 / * get an fh by ino DISCARDED */ -#define NFSCTL_GETFD 7 /* get an fh by path (used by mountd) */ -#define NFSCTL_GETFS 8 /* get an fh by path with max FH len */ - -/* SVC */ -struct nfsctl_svc { - unsigned short svc_port; - int svc_nthreads; -}; - -/* ADDCLIENT/DELCLIENT */ -struct nfsctl_client { - char cl_ident[NFSCLNT_IDMAX+1]; - int cl_naddr; - struct in_addr cl_addrlist[NFSCLNT_ADDRMAX]; - int cl_fhkeytype; - int cl_fhkeylen; - unsigned char cl_fhkey[NFSCLNT_KEYMAX]; -}; - -/* EXPORT/UNEXPORT */ -struct nfsctl_export { - char ex_client[NFSCLNT_IDMAX+1]; - char ex_path[NFS_MAXPATHLEN+1]; - __kernel_old_dev_t ex_dev; - __kernel_ino_t ex_ino; - int ex_flags; - __kernel_uid_t ex_anon_uid; - __kernel_gid_t ex_anon_gid; -}; - -/* GETFD */ -struct nfsctl_fdparm { - struct sockaddr gd_addr; - char gd_path[NFS_MAXPATHLEN+1]; - int gd_version; -}; - -/* GETFS - GET Filehandle with Size */ -struct nfsctl_fsparm { - struct sockaddr gd_addr; - char gd_path[NFS_MAXPATHLEN+1]; - int gd_maxlen; -}; - -/* - * This is the argument union. - */ -struct nfsctl_arg { - int ca_version; /* safeguard */ - union { - struct nfsctl_svc u_svc; - struct nfsctl_client u_client; - struct nfsctl_export u_export; - struct nfsctl_fdparm u_getfd; - struct nfsctl_fsparm u_getfs; - /* - * The following dummy member is needed to preserve binary compatibility - * on platforms where alignof(void*)>alignof(int). It's needed because - * this union used to contain a member (u_umap) which contained a - * pointer. - */ - void *u_ptr; - } u; -#define ca_svc u.u_svc -#define ca_client u.u_client -#define ca_export u.u_export -#define ca_getfd u.u_getfd -#define ca_getfs u.u_getfs -}; - -union nfsctl_res { - __u8 cr_getfh[NFS_FHSIZE]; - struct knfsd_fh cr_getfs; -}; - -#ifdef __KERNEL__ -/* - * Kernel syscall implementation. - */ -extern int exp_addclient(struct nfsctl_client *ncp); -extern int exp_delclient(struct nfsctl_client *ncp); -extern int exp_export(struct nfsctl_export *nxp); -extern int exp_unexport(struct nfsctl_export *nxp); - -#endif /* __KERNEL__ */ - -#endif /* NFSD_SYSCALL_H */ diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8ad70dcac3f9..8049bf77d799 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -161,6 +161,13 @@ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -231,6 +238,8 @@ * * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * probe requests at CCK rate or not. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to * NL80211_CMD_GET_SCAN and on the "scan" multicast group) * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, @@ -425,6 +434,8 @@ * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. + * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the + * management frames at CCK rate or not in 2GHz band. * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this * command may be used with the corresponding cookie to cancel the wait * time if it is known that it is no longer necessary. @@ -492,6 +503,12 @@ * this command may also be sent by the driver as an MLME event to * inform userspace of the new replay counter. * + * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace + * of PMKSA caching dandidates. + * + * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -616,6 +633,11 @@ enum nl80211_commands { NL80211_CMD_SET_REKEY_OFFLOAD, + NL80211_CMD_PMKSA_CANDIDATE, + + NL80211_CMD_TDLS_OPER, + NL80211_CMD_TDLS_MGMT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -762,6 +784,8 @@ enum nl80211_commands { * that can be added to a scan request * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information * elements that can be added to a scheduled scan request + * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be + * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. * * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive @@ -842,18 +866,20 @@ enum nl80211_commands { * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT * event (u16) * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to - * indicate which unicast key ciphers will be used with the connection + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate - * which group key cipher will be used with the connection (a u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate - * which WPA version(s) the AP we want to associate with is using + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate - * which key management algorithm(s) to use (an array of u32). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. @@ -1002,6 +1028,24 @@ enum nl80211_commands { * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan * cycles, in msecs. + + * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more + * sets of attributes to match during scheduled scans. Only BSSs + * that match any of the sets will be reported. These are + * pass-thru filter rules. + * For a match to succeed, the BSS must match all attributes of a + * set. Since not every hardware supports matching all types of + * attributes, there is no guarantee that the reported BSSs are + * fully complying with the match sets and userspace needs to be + * able to ignore them by itself. + * Thus, the implementation is somewhat hardware-dependent, but + * this is only an optimization and the userspace application + * needs to handle all the non-filtered results anyway. + * If the match attributes don't make sense when combined with + * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID + * is included in the probe request, but the match attributes + * will never let it go through), -EINVAL may be returned. + * If ommited, no filtering is done. * * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported * interface combinations. In each nested item, it contains attributes @@ -1019,6 +1063,52 @@ enum nl80211_commands { * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but * without the length restriction (at most %NL80211_MAX_SUPP_RATES). * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * + * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration + * of the station, see &enum nl80211_sta_wme_attr. + * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working + * as AP. + * + * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of + * roaming to another AP in the same ESS if the signal lever is low. + * + * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching + * candidate information, see &enum nl80211_pmksa_candidate_attr. + * + * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not + * for management frames transmission. In order to avoid p2p probe/action + * frames are being transmitted at CCK rate in 2GHz band, the user space + * applications use this attribute. + * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and + * %NL80211_CMD_FRAME commands. + * + * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup + * request, link setup confirm, link teardown, etc.). Values are + * described in the TDLS (802.11z) specification. + * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a + * TDLS conversation between two devices. + * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see + * &enum nl80211_tdls_operation, represented as a u8. + * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate + * as a TDLS peer sta. + * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown + * procedures should be performed by sending TDLS packets via + * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be + * used for asking the driver to perform a TDLS operation. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1224,6 +1314,29 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_SUPP_RATES, + NL80211_ATTR_HIDDEN_SSID, + + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + + NL80211_ATTR_STA_WME, + NL80211_ATTR_SUPPORT_AP_UAPSD, + + NL80211_ATTR_ROAM_SUPPORT, + + NL80211_ATTR_SCHED_SCAN_MATCH, + NL80211_ATTR_MAX_MATCH_SETS, + + NL80211_ATTR_PMKSA_CANDIDATE, + + NL80211_ATTR_TX_NO_CCK_RATE, + + NL80211_ATTR_TDLS_ACTION, + NL80211_ATTR_TDLS_DIALOG_TOKEN, + NL80211_ATTR_TDLS_OPERATION, + NL80211_ATTR_TDLS_SUPPORT, + NL80211_ATTR_TDLS_EXTERNAL_SETUP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1321,6 +1434,7 @@ enum nl80211_iftype { * @NL80211_STA_FLAG_WME: station is WME/QoS capable * @NL80211_STA_FLAG_MFP: station uses management frame protection * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated + * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1331,6 +1445,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_WME, NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, + NL80211_STA_FLAG_TDLS_PEER, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -1433,6 +1548,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute * containing info as possible, see &enum nl80211_sta_bss_param * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected + * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1454,6 +1570,7 @@ enum nl80211_sta_info { NL80211_STA_INFO_RX_BITRATE, NL80211_STA_INFO_BSS_PARAM, NL80211_STA_INFO_CONNECTED_TIME, + NL80211_STA_INFO_STA_FLAGS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -1683,6 +1800,26 @@ enum nl80211_reg_rule_attr { }; /** + * enum nl80211_sched_scan_match_attr - scheduled scan match attributes + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. + * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter + * attribute number currently defined + * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use + */ +enum nl80211_sched_scan_match_attr { + __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, + + NL80211_ATTR_SCHED_SCAN_MATCH_SSID, + + /* keep last */ + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, + NL80211_SCHED_SCAN_MATCH_ATTR_MAX = + __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 +}; + +/** * enum nl80211_reg_rule_flags - regulatory rule flags * * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed @@ -1833,6 +1970,13 @@ enum nl80211_mntr_flags { * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a * source mesh point for path selection elements. * + * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between + * root announcements are transmitted. + * + * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. + * * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use @@ -1854,6 +1998,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, NL80211_MESHCONF_HWMP_ROOTMODE, NL80211_MESHCONF_ELEMENT_TTL, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, @@ -2430,4 +2576,78 @@ enum nl80211_rekey_data { MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 }; +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + +/** + * enum nl80211_sta_wme_attr - station WME attributes + * @__NL80211_STA_WME_INVALID: invalid number for nested attribute + * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format + * is the same as the AC bitmap in the QoS info field. + * @NL80211_STA_WME_MAX_SP: max service period. the format is the same + * as the MAX_SP field in the QoS info field (but already shifted down). + * @__NL80211_STA_WME_AFTER_LAST: internal + * @NL80211_STA_WME_MAX: highest station WME attribute + */ +enum nl80211_sta_wme_attr { + __NL80211_STA_WME_INVALID, + NL80211_STA_WME_UAPSD_QUEUES, + NL80211_STA_WME_MAX_SP, + + /* keep last */ + __NL80211_STA_WME_AFTER_LAST, + NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 +}; + +/** + * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates + * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes + * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher + * priority) + * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) + * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) + * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes + * (internal) + * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute + * (internal) + */ +enum nl80211_pmksa_candidate_attr { + __NL80211_PMKSA_CANDIDATE_INVALID, + NL80211_PMKSA_CANDIDATE_INDEX, + NL80211_PMKSA_CANDIDATE_BSSID, + NL80211_PMKSA_CANDIDATE_PREAUTH, + + /* keep last */ + NUM_NL80211_PMKSA_CANDIDATE, + MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 +}; + +/** + * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION + * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request + * @NL80211_TDLS_SETUP: Setup TDLS link + * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established + * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link + * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link + */ +enum nl80211_tdls_operation { + NL80211_TDLS_DISCOVERY_REQ, + NL80211_TDLS_SETUP, + NL80211_TDLS_TEARDOWN, + NL80211_TDLS_ENABLE_LINK, + NL80211_TDLS_DISABLE_LINK, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/of.h b/include/linux/of.h index 9180dc5cb00b..5dbe263462a9 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -17,6 +17,7 @@ */ #include <linux/types.h> #include <linux/bitops.h> +#include <linux/errno.h> #include <linux/kref.h> #include <linux/mod_devicetable.h> #include <linux/spinlock.h> @@ -68,6 +69,7 @@ struct device_node { /* Pointer for first entry in chain of all nodes. */ extern struct device_node *allnodes; extern struct device_node *of_chosen; +extern struct device_node *of_aliases; extern rwlock_t devtree_lock; static inline bool of_have_populated_dt(void) @@ -199,6 +201,8 @@ extern int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz); +extern int of_property_read_u64(const struct device_node *np, + const char *propname, u64 *out_value); extern int of_property_read_string(struct device_node *np, const char *propname, @@ -209,6 +213,9 @@ extern int of_device_is_available(const struct device_node *device); extern const void *of_get_property(const struct device_node *node, const char *name, int *lenp); +#define for_each_property(pp, properties) \ + for (pp = properties; pp != NULL; pp = pp->next) + extern int of_n_addr_cells(struct device_node *np); extern int of_n_size_cells(struct device_node *np); extern const struct of_device_id *of_match_node( @@ -221,6 +228,9 @@ extern int of_parse_phandles_with_args(struct device_node *np, const char *list_name, const char *cells_name, int index, struct device_node **out_node, const void **out_args); +extern void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)); +extern int of_alias_get_id(struct device_node *np, const char *stem); + extern int of_machine_is_compatible(const char *compat); extern int prom_add_property(struct device_node* np, struct property* prop); @@ -235,6 +245,7 @@ extern void of_attach_node(struct device_node *); extern void of_detach_node(struct device_node *); #endif +#define of_match_ptr(_ptr) (_ptr) #else /* CONFIG_OF */ static inline bool of_have_populated_dt(void) @@ -242,6 +253,22 @@ static inline bool of_have_populated_dt(void) return false; } +#define for_each_child_of_node(parent, child) \ + while (0) + +static inline int of_device_is_compatible(const struct device_node *device, + const char *name) +{ + return 0; +} + +static inline struct property *of_find_property(const struct device_node *np, + const char *name, + int *lenp) +{ + return NULL; +} + static inline int of_property_read_u32_array(const struct device_node *np, const char *propname, u32 *out_values, size_t sz) @@ -263,6 +290,21 @@ static inline const void *of_get_property(const struct device_node *node, return NULL; } +static inline int of_property_read_u64(const struct device_node *np, + const char *propname, u64 *out_value) +{ + return -ENOSYS; +} + +static inline struct device_node *of_parse_phandle(struct device_node *np, + const char *phandle_name, + int index) +{ + return NULL; +} + +#define of_match_ptr(_ptr) NULL +#define of_match_node(_matches, _node) NULL #endif /* CONFIG_OF */ static inline int of_property_read_u32(const struct device_node *np, diff --git a/include/linux/opp.h b/include/linux/opp.h index 7020e9736fc5..87a9208f8aec 100644 --- a/include/linux/opp.h +++ b/include/linux/opp.h @@ -16,9 +16,14 @@ #include <linux/err.h> #include <linux/cpufreq.h> +#include <linux/notifier.h> struct opp; +enum opp_event { + OPP_EVENT_ADD, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE, +}; + #if defined(CONFIG_PM_OPP) unsigned long opp_get_voltage(struct opp *opp); @@ -40,6 +45,8 @@ int opp_enable(struct device *dev, unsigned long freq); int opp_disable(struct device *dev, unsigned long freq); +struct srcu_notifier_head *opp_get_notifier(struct device *dev); + #else static inline unsigned long opp_get_voltage(struct opp *opp) { @@ -89,6 +96,11 @@ static inline int opp_disable(struct device *dev, unsigned long freq) { return 0; } + +struct srcu_notifier_head *opp_get_notifier(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} #endif /* CONFIG_PM */ #if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP) diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index 49c8727eeb57..a4c562453f6b 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -166,7 +166,7 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t co int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count); /** lock for read/write safety */ -extern spinlock_t oprofilefs_lock; +extern raw_spinlock_t oprofilefs_lock; /** * Add the contents of a circular buffer to the event buffer. diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h index 655824fa4c76..e3d0b3890249 100644 --- a/include/linux/pci-ats.h +++ b/include/linux/pci-ats.h @@ -1,6 +1,8 @@ #ifndef LINUX_PCI_ATS_H #define LINUX_PCI_ATS_H +#include <linux/pci.h> + /* Address Translation Service */ struct pci_ats { int pos; /* capability position */ @@ -15,6 +17,7 @@ struct pci_ats { extern int pci_enable_ats(struct pci_dev *dev, int ps); extern void pci_disable_ats(struct pci_dev *dev); extern int pci_ats_queue_depth(struct pci_dev *dev); + /** * pci_ats_enabled - query the ATS status * @dev: the PCI device @@ -49,4 +52,76 @@ static inline int pci_ats_enabled(struct pci_dev *dev) #endif /* CONFIG_PCI_IOV */ +#ifdef CONFIG_PCI_PRI + +extern int pci_enable_pri(struct pci_dev *pdev, u32 reqs); +extern void pci_disable_pri(struct pci_dev *pdev); +extern bool pci_pri_enabled(struct pci_dev *pdev); +extern int pci_reset_pri(struct pci_dev *pdev); +extern bool pci_pri_stopped(struct pci_dev *pdev); +extern int pci_pri_status(struct pci_dev *pdev); + +#else /* CONFIG_PCI_PRI */ + +static inline int pci_enable_pri(struct pci_dev *pdev, u32 reqs) +{ + return -ENODEV; +} + +static inline void pci_disable_pri(struct pci_dev *pdev) +{ +} + +static inline bool pci_pri_enabled(struct pci_dev *pdev) +{ + return false; +} + +static inline int pci_reset_pri(struct pci_dev *pdev) +{ + return -ENODEV; +} + +static inline bool pci_pri_stopped(struct pci_dev *pdev) +{ + return true; +} + +static inline int pci_pri_status(struct pci_dev *pdev) +{ + return -ENODEV; +} +#endif /* CONFIG_PCI_PRI */ + +#ifdef CONFIG_PCI_PASID + +extern int pci_enable_pasid(struct pci_dev *pdev, int features); +extern void pci_disable_pasid(struct pci_dev *pdev); +extern int pci_pasid_features(struct pci_dev *pdev); +extern int pci_max_pasids(struct pci_dev *pdev); + +#else /* CONFIG_PCI_PASID */ + +static inline int pci_enable_pasid(struct pci_dev *pdev, int features) +{ + return -EINVAL; +} + +static inline void pci_disable_pasid(struct pci_dev *pdev) +{ +} + +static inline int pci_pasid_features(struct pci_dev *pdev) +{ + return -EINVAL; +} + +static inline int pci_max_pasids(struct pci_dev *pdev) +{ + return -EINVAL; +} + +#endif /* CONFIG_PCI_PASID */ + + #endif /* LINUX_PCI_ATS_H*/ diff --git a/include/linux/pci.h b/include/linux/pci.h index 9fc01226055b..337df0d5d5f7 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -174,6 +174,8 @@ enum pci_dev_flags { PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG = (__force pci_dev_flags_t) 1, /* Device configuration is irrevocably lost if disabled into D3 */ PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2, + /* Provide indication device is assigned by a Virtual Machine Manager */ + PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4, }; enum pci_irq_reroute_variant { @@ -273,6 +275,7 @@ struct pci_dev { unsigned int pme_support:5; /* Bitmask of states from which PME# can be generated */ unsigned int pme_interrupt:1; + unsigned int pme_poll:1; /* Poll device's PME status bit */ unsigned int d1_support:1; /* Low power state D1 is supported */ unsigned int d2_support:1; /* Low power state D2 is supported */ unsigned int no_d1d2:1; /* Only allow D0 and D3 */ @@ -955,6 +958,7 @@ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), int pci_cfg_space_size_ext(struct pci_dev *dev); int pci_cfg_space_size(struct pci_dev *dev); unsigned char pci_bus_max_busnr(struct pci_bus *bus); +void pci_setup_bridge(struct pci_bus *bus); #define PCI_VGA_STATE_CHANGE_BRIDGE (1 << 0) #define PCI_VGA_STATE_CHANGE_DECODES (1 << 1) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ae96bbe54518..1679ff6931f9 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2302,6 +2302,11 @@ #define PCI_DEVICE_ID_RENESAS_SH7785 0x0007 #define PCI_DEVICE_ID_RENESAS_SH7786 0x0010 +#define PCI_VENDOR_ID_SOLARFLARE 0x1924 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0 0x0703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1 0x6703 +#define PCI_DEVICE_ID_SOLARFLARE_SFC4000B 0x0710 + #define PCI_VENDOR_ID_TDI 0x192E #define PCI_DEVICE_ID_TDI_EHCI 0x0101 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e8840964aca1..b5d9657f3100 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -663,6 +663,26 @@ #define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ #define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ +/* Page Request Interface */ +#define PCI_PRI_CAP 0x13 /* PRI capability ID */ +#define PCI_PRI_CONTROL_OFF 0x04 /* Offset of control register */ +#define PCI_PRI_STATUS_OFF 0x06 /* Offset of status register */ +#define PCI_PRI_ENABLE 0x0001 /* Enable mask */ +#define PCI_PRI_RESET 0x0002 /* Reset bit mask */ +#define PCI_PRI_STATUS_RF 0x0001 /* Request Failure */ +#define PCI_PRI_STATUS_UPRGI 0x0002 /* Unexpected PRG index */ +#define PCI_PRI_STATUS_STOPPED 0x0100 /* PRI Stopped */ +#define PCI_PRI_MAX_REQ_OFF 0x08 /* Cap offset for max reqs supported */ +#define PCI_PRI_ALLOC_REQ_OFF 0x0c /* Cap offset for max reqs allowed */ + +/* PASID capability */ +#define PCI_PASID_CAP 0x1b /* PASID capability ID */ +#define PCI_PASID_CAP_OFF 0x04 /* PASID feature register */ +#define PCI_PASID_CONTROL_OFF 0x06 /* PASID control register */ +#define PCI_PASID_ENABLE 0x01 /* Enable/Supported bit */ +#define PCI_PASID_EXEC 0x02 /* Exec permissions Enable/Supported */ +#define PCI_PASID_PRIV 0x04 /* Priviledge Mode Enable/Support */ + /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ #define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ diff --git a/include/linux/percpu_counter.h b/include/linux/percpu_counter.h index 5edc9014263a..b9df9ed1adc0 100644 --- a/include/linux/percpu_counter.h +++ b/include/linux/percpu_counter.h @@ -16,7 +16,7 @@ #ifdef CONFIG_SMP struct percpu_counter { - spinlock_t lock; + raw_spinlock_t lock; s64 count; #ifdef CONFIG_HOTPLUG_CPU struct list_head list; /* All percpu_counters are on a list */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index c816075c01ce..1e9ebe5e0091 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -220,7 +220,10 @@ struct perf_event_attr { mmap_data : 1, /* non-exec mmap data */ sample_id_all : 1, /* sample_type all events */ - __reserved_1 : 45; + exclude_host : 1, /* don't count in host */ + exclude_guest : 1, /* don't count in guest */ + + __reserved_1 : 43; union { __u32 wakeup_events; /* wakeup every n events */ diff --git a/include/linux/phonet.h b/include/linux/phonet.h index 6fb13841db45..f53a4167c5f4 100644 --- a/include/linux/phonet.h +++ b/include/linux/phonet.h @@ -24,6 +24,7 @@ #define LINUX_PHONET_H #include <linux/types.h> +#include <linux/socket.h> /* Automatic protocol selection */ #define PN_PROTO_TRANSPORT 0 @@ -96,11 +97,11 @@ struct phonetmsg { /* Phonet socket address structure */ struct sockaddr_pn { - sa_family_t spn_family; + __kernel_sa_family_t spn_family; __u8 spn_obj; __u8 spn_dev; __u8 spn_resource; - __u8 spn_zero[sizeof(struct sockaddr) - sizeof(sa_family_t) - 3]; + __u8 spn_zero[sizeof(struct sockaddr) - sizeof(__kernel_sa_family_t) - 3]; } __attribute__((packed)); /* Well known address */ diff --git a/include/linux/phy.h b/include/linux/phy.h index 54fc4138955f..79f337c47388 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -420,7 +420,7 @@ struct phy_driver { /* * Requests a Tx timestamp for 'skb'. The phy driver promises - * to deliver it to the socket's error queue as soon as a + * to deliver it using skb_complete_tx_timestamp() as soon as a * timestamp becomes available. One of the PTP_CLASS_ values * is passed in 'type'. */ diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h new file mode 100644 index 000000000000..88863531d862 --- /dev/null +++ b/include/linux/pinctrl/machine.h @@ -0,0 +1,107 @@ +/* + * Machine interface for the pinctrl subsystem. + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINMUX_MACHINE_H +#define __LINUX_PINMUX_MACHINE_H + +/** + * struct pinmux_map - boards/machines shall provide this map for devices + * @name: the name of this specific map entry for the particular machine. + * This is the second parameter passed to pinmux_get() when you want + * to have several mappings to the same device + * @ctrl_dev: the pin control device to be used by this mapping, may be NULL + * if you provide .ctrl_dev_name instead (this is more common) + * @ctrl_dev_name: the name of the device controlling this specific mapping, + * the name must be the same as in your struct device*, may be NULL if + * you provide .ctrl_dev instead + * @function: a function in the driver to use for this mapping, the driver + * will lookup the function referenced by this ID on the specified + * pin control device + * @group: sometimes a function can map to different pin groups, so this + * selects a certain specific pin group to activate for the function, if + * left as NULL, the first applicable group will be used + * @dev: the device using this specific mapping, may be NULL if you provide + * .dev_name instead (this is more common) + * @dev_name: the name of the device using this specific mapping, the name + * must be the same as in your struct device*, may be NULL if you + * provide .dev instead + * @hog_on_boot: if this is set to true, the pin control subsystem will itself + * hog the mappings as the pinmux device drivers are attached, so this is + * typically used with system maps (mux mappings without an assigned + * device) that you want to get hogged and enabled by default as soon as + * a pinmux device supporting it is registered. These maps will not be + * disabled and put until the system shuts down. + */ +struct pinmux_map { + const char *name; + struct device *ctrl_dev; + const char *ctrl_dev_name; + const char *function; + const char *group; + struct device *dev; + const char *dev_name; + const bool hog_on_boot; +}; + +/* + * Convenience macro to set a simple map from a certain pin controller and a + * certain function to a named device + */ +#define PINMUX_MAP(a, b, c, d) \ + { .name = a, .ctrl_dev_name = b, .function = c, .dev_name = d } + +/* + * Convenience macro to map a system function onto a certain pinctrl device. + * System functions are not assigned to a particular device. + */ +#define PINMUX_MAP_SYS(a, b, c) \ + { .name = a, .ctrl_dev_name = b, .function = c } + +/* + * Convenience macro to map a function onto the primary device pinctrl device + * this is especially helpful on systems that have only one pin controller + * or need to set up a lot of mappings on the primary controller. + */ +#define PINMUX_MAP_PRIMARY(a, b, c) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \ + .dev_name = c } + +/* + * Convenience macro to map a system function onto the primary pinctrl device. + * System functions are not assigned to a particular device. + */ +#define PINMUX_MAP_PRIMARY_SYS(a, b) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b } + +/* + * Convenience macro to map a system function onto the primary pinctrl device, + * to be hogged by the pinmux core until the system shuts down. + */ +#define PINMUX_MAP_PRIMARY_SYS_HOG(a, b) \ + { .name = a, .ctrl_dev_name = "pinctrl.0", .function = b, \ + .hog_on_boot = true } + + +#ifdef CONFIG_PINMUX + +extern int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps); + +#else + +static inline int pinmux_register_mappings(struct pinmux_map const *map, + unsigned num_maps) +{ + return 0; +} + +#endif /* !CONFIG_PINMUX */ +#endif diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h new file mode 100644 index 000000000000..3605e947fa90 --- /dev/null +++ b/include/linux/pinctrl/pinctrl.h @@ -0,0 +1,133 @@ +/* + * Interface the pinctrl subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINCTRL_H +#define __LINUX_PINCTRL_PINCTRL_H + +#ifdef CONFIG_PINCTRL + +#include <linux/radix-tree.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/seq_file.h> + +struct pinctrl_dev; +struct pinmux_ops; +struct gpio_chip; + +/** + * struct pinctrl_pin_desc - boards/machines provide information on their + * pins, pads or other muxable units in this struct + * @number: unique pin number from the global pin number space + * @name: a name for this pin + */ +struct pinctrl_pin_desc { + unsigned number; + const char *name; +}; + +/* Convenience macro to define a single named or anonymous pin descriptor */ +#define PINCTRL_PIN(a, b) { .number = a, .name = b } +#define PINCTRL_PIN_ANON(a) { .number = a } + +/** + * struct pinctrl_gpio_range - each pin controller can provide subranges of + * the GPIO number space to be handled by the controller + * @node: list node for internal use + * @name: a name for the chip in this range + * @id: an ID number for the chip in this range + * @base: base offset of the GPIO range + * @npins: number of pins in the GPIO range, including the base number + * @gc: an optional pointer to a gpio_chip + */ +struct pinctrl_gpio_range { + struct list_head node; + const char *name; + unsigned int id; + unsigned int base; + unsigned int npins; + struct gpio_chip *gc; +}; + +/** + * struct pinctrl_ops - global pin control operations, to be implemented by + * pin controller drivers. + * @list_groups: list the number of selectable named groups available + * in this pinmux driver, the core will begin on 0 and call this + * repeatedly as long as it returns >= 0 to enumerate the groups + * @get_group_name: return the group name of the pin group + * @get_group_pins: return an array of pins corresponding to a certain + * group selector @pins, and the size of the array in @num_pins + * @pin_dbg_show: optional debugfs display hook that will provide per-device + * info for a certain pin in debugfs + */ +struct pinctrl_ops { + int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector); + const char *(*get_group_name) (struct pinctrl_dev *pctldev, + unsigned selector); + int (*get_group_pins) (struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins); + void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned offset); +}; + +/** + * struct pinctrl_desc - pin controller descriptor, register this to pin + * control subsystem + * @name: name for the pin controller + * @pins: an array of pin descriptors describing all the pins handled by + * this pin controller + * @npins: number of descriptors in the array, usually just ARRAY_SIZE() + * of the pins field above + * @maxpin: since pin spaces may be sparse, there can he "holes" in the + * pin range, this attribute gives the maximum pin number in the + * total range. This should not be lower than npins for example, + * but may be equal to npins if you have no holes in the pin range. + * @pctlops: pin control operation vtable, to support global concepts like + * grouping of pins, this is optional. + * @pmxops: pinmux operation vtable, if you support pinmuxing in your driver + * @owner: module providing the pin controller, used for refcounting + */ +struct pinctrl_desc { + const char *name; + struct pinctrl_pin_desc const *pins; + unsigned int npins; + unsigned int maxpin; + struct pinctrl_ops *pctlops; + struct pinmux_ops *pmxops; + struct module *owner; +}; + +/* External interface to pin controller */ +extern struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, + struct device *dev, void *driver_data); +extern void pinctrl_unregister(struct pinctrl_dev *pctldev); +extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin); +extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); +extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range); +extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); +extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); +#else + + +/* Sufficiently stupid default function when pinctrl is not in use */ +static inline bool pin_is_valid(struct pinctrl_dev *pctldev, int pin) +{ + return pin >= 0; +} + +#endif /* !CONFIG_PINCTRL */ + +#endif /* __LINUX_PINCTRL_PINCTRL_H */ diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h new file mode 100644 index 000000000000..3c430e797efc --- /dev/null +++ b/include/linux/pinctrl/pinmux.h @@ -0,0 +1,117 @@ +/* + * Interface the pinmux subsystem + * + * Copyright (C) 2011 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __LINUX_PINCTRL_PINMUX_H +#define __LINUX_PINCTRL_PINMUX_H + +#include <linux/list.h> +#include <linux/seq_file.h> +#include "pinctrl.h" + +/* This struct is private to the core and should be regarded as a cookie */ +struct pinmux; + +#ifdef CONFIG_PINMUX + +struct pinctrl_dev; + +/** + * struct pinmux_ops - pinmux operations, to be implemented by pin controller + * drivers that support pinmuxing + * @request: called by the core to see if a certain pin can be made available + * available for muxing. This is called by the core to acquire the pins + * before selecting any actual mux setting across a function. The driver + * is allowed to answer "no" by returning a negative error code + * @free: the reverse function of the request() callback, frees a pin after + * being requested + * @list_functions: list the number of selectable named functions available + * in this pinmux driver, the core will begin on 0 and call this + * repeatedly as long as it returns >= 0 to enumerate mux settings + * @get_function_name: return the function name of the muxing selector, + * called by the core to figure out which mux setting it shall map a + * certain device to + * @get_function_groups: return an array of groups names (in turn + * referencing pins) connected to a certain function selector. The group + * name can be used with the generic @pinctrl_ops to retrieve the + * actual pins affected. The applicable groups will be returned in + * @groups and the number of groups in @num_groups + * @enable: enable a certain muxing function with a certain pin group. The + * driver does not need to figure out whether enabling this function + * conflicts some other use of the pins in that group, such collisions + * are handled by the pinmux subsystem. The @func_selector selects a + * certain function whereas @group_selector selects a certain set of pins + * to be used. On simple controllers the latter argument may be ignored + * @disable: disable a certain muxing selector with a certain pin group + * @gpio_request_enable: requests and enables GPIO on a certain pin. + * Implement this only if you can mux every pin individually as GPIO. The + * affected GPIO range is passed along with an offset into that + * specific GPIO range - function selectors and pin groups are orthogonal + * to this, the core will however make sure the pins do not collide + */ +struct pinmux_ops { + int (*request) (struct pinctrl_dev *pctldev, unsigned offset); + int (*free) (struct pinctrl_dev *pctldev, unsigned offset); + int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector); + const char *(*get_function_name) (struct pinctrl_dev *pctldev, + unsigned selector); + int (*get_function_groups) (struct pinctrl_dev *pctldev, + unsigned selector, + const char * const **groups, + unsigned * const num_groups); + int (*enable) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); + void (*disable) (struct pinctrl_dev *pctldev, unsigned func_selector, + unsigned group_selector); + int (*gpio_request_enable) (struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset); +}; + +/* External interface to pinmux */ +extern int pinmux_request_gpio(unsigned gpio); +extern void pinmux_free_gpio(unsigned gpio); +extern struct pinmux * __must_check pinmux_get(struct device *dev, const char *name); +extern void pinmux_put(struct pinmux *pmx); +extern int pinmux_enable(struct pinmux *pmx); +extern void pinmux_disable(struct pinmux *pmx); + +#else /* !CONFIG_PINMUX */ + +static inline int pinmux_request_gpio(unsigned gpio) +{ + return 0; +} + +static inline void pinmux_free_gpio(unsigned gpio) +{ +} + +static inline struct pinmux * __must_check pinmux_get(struct device *dev, const char *name) +{ + return NULL; +} + +static inline void pinmux_put(struct pinmux *pmx) +{ +} + +static inline int pinmux_enable(struct pinmux *pmx) +{ + return 0; +} + +static inline void pinmux_disable(struct pinmux *pmx) +{ +} + +#endif /* CONFIG_PINMUX */ + +#endif /* __LINUX_PINCTRL_PINMUX_H */ diff --git a/include/linux/platform_data/dwc3-omap.h b/include/linux/platform_data/dwc3-omap.h new file mode 100644 index 000000000000..ada401244e0b --- /dev/null +++ b/include/linux/platform_data/dwc3-omap.h @@ -0,0 +1,47 @@ +/** + * dwc3-omap.h - OMAP Specific Glue layer, header. + * + * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com + * All rights reserved. + * + * Author: Felipe Balbi <balbi@ti.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2, as published by the Free + * Software Foundation. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +enum dwc3_omap_utmi_mode { + DWC3_OMAP_UTMI_MODE_UNKNOWN = 0, + DWC3_OMAP_UTMI_MODE_HW, + DWC3_OMAP_UTMI_MODE_SW, +}; + +struct dwc3_omap_data { + enum dwc3_omap_utmi_mode utmi_mode; +}; diff --git a/include/linux/platform_data/exynos4_tmu.h b/include/linux/platform_data/exynos4_tmu.h new file mode 100644 index 000000000000..39e038cca590 --- /dev/null +++ b/include/linux/platform_data/exynos4_tmu.h @@ -0,0 +1,83 @@ +/* + * exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit) + * + * Copyright (C) 2011 Samsung Electronics + * Donggeun Kim <dg77.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _LINUX_EXYNOS4_TMU_H +#define _LINUX_EXYNOS4_TMU_H + +enum calibration_type { + TYPE_ONE_POINT_TRIMMING, + TYPE_TWO_POINT_TRIMMING, + TYPE_NONE, +}; + +/** + * struct exynos4_tmu_platform_data + * @threshold: basic temperature for generating interrupt + * 25 <= threshold <= 125 [unit: degree Celsius] + * @trigger_levels: array for each interrupt levels + * [unit: degree Celsius] + * 0: temperature for trigger_level0 interrupt + * condition for trigger_level0 interrupt: + * current temperature > threshold + trigger_levels[0] + * 1: temperature for trigger_level1 interrupt + * condition for trigger_level1 interrupt: + * current temperature > threshold + trigger_levels[1] + * 2: temperature for trigger_level2 interrupt + * condition for trigger_level2 interrupt: + * current temperature > threshold + trigger_levels[2] + * 3: temperature for trigger_level3 interrupt + * condition for trigger_level3 interrupt: + * current temperature > threshold + trigger_levels[3] + * @trigger_level0_en: + * 1 = enable trigger_level0 interrupt, + * 0 = disable trigger_level0 interrupt + * @trigger_level1_en: + * 1 = enable trigger_level1 interrupt, + * 0 = disable trigger_level1 interrupt + * @trigger_level2_en: + * 1 = enable trigger_level2 interrupt, + * 0 = disable trigger_level2 interrupt + * @trigger_level3_en: + * 1 = enable trigger_level3 interrupt, + * 0 = disable trigger_level3 interrupt + * @gain: gain of amplifier in the positive-TC generator block + * 0 <= gain <= 15 + * @reference_voltage: reference voltage of amplifier + * in the positive-TC generator block + * 0 <= reference_voltage <= 31 + * @cal_type: calibration type for temperature + * + * This structure is required for configuration of exynos4_tmu driver. + */ +struct exynos4_tmu_platform_data { + u8 threshold; + u8 trigger_levels[4]; + bool trigger_level0_en; + bool trigger_level1_en; + bool trigger_level2_en; + bool trigger_level3_en; + + u8 gain; + u8 reference_voltage; + + enum calibration_type cal_type; +}; +#endif /* _LINUX_EXYNOS4_TMU_H */ diff --git a/include/linux/platform_data/mv_usb.h b/include/linux/platform_data/mv_usb.h new file mode 100644 index 000000000000..e9d9149ddf38 --- /dev/null +++ b/include/linux/platform_data/mv_usb.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_PLATFORM_USB_H +#define __MV_PLATFORM_USB_H + +enum pxa_ehci_type { + EHCI_UNDEFINED = 0, + PXA_U2OEHCI, /* pxa 168, 9xx */ + PXA_SPH, /* pxa 168, 9xx SPH */ + MMP3_HSIC, /* mmp3 hsic */ + MMP3_FSIC, /* mmp3 fsic */ +}; + +enum { + MV_USB_MODE_OTG, + MV_USB_MODE_HOST, +}; + +enum { + VBUS_LOW = 0, + VBUS_HIGH = 1 << 0, +}; + +struct mv_usb_addon_irq { + unsigned int irq; + int (*poll)(void); +}; + +struct mv_usb_platform_data { + unsigned int clknum; + char **clkname; + struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/ + struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/ + + /* only valid for HCD. OTG or Host only*/ + unsigned int mode; + + int (*phy_init)(unsigned int regbase); + void (*phy_deinit)(unsigned int regbase); + int (*set_vbus)(unsigned int vbus); +}; + +#endif diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h index abd286215279..88734e871e3a 100644 --- a/include/linux/platform_data/ntc_thermistor.h +++ b/include/linux/platform_data/ntc_thermistor.h @@ -36,7 +36,7 @@ struct ntc_thermistor_platform_data { * read_uV() * * How to setup pullup_ohm, pulldown_ohm, and connect is - * described at Documentation/hwmon/ntc + * described at Documentation/hwmon/ntc_thermistor * * pullup/down_ohm: 0 for infinite / not-connected */ diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 27bb05aae70d..2a23f7d1a825 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -49,10 +49,54 @@ extern struct resource *platform_get_resource_byname(struct platform_device *, u extern int platform_get_irq_byname(struct platform_device *, const char *); extern int platform_add_devices(struct platform_device **, int); -extern struct platform_device *platform_device_register_resndata( +struct platform_device_info { + struct device *parent; + + const char *name; + int id; + + const struct resource *res; + unsigned int num_res; + + const void *data; + size_t size_data; + u64 dma_mask; +}; +extern struct platform_device *platform_device_register_full( + struct platform_device_info *pdevinfo); + +/** + * platform_device_register_resndata - add a platform-level device with + * resources and platform-specific data + * + * @parent: parent device for the device we're adding + * @name: base name of the device we're adding + * @id: instance id + * @res: set of resources that needs to be allocated for the device + * @num: number of resources + * @data: platform specific data for this platform device + * @size: size of platform specific data + * + * Returns &struct platform_device pointer on success, or ERR_PTR() on error. + */ +static inline struct platform_device *platform_device_register_resndata( struct device *parent, const char *name, int id, const struct resource *res, unsigned int num, - const void *data, size_t size); + const void *data, size_t size) { + + struct platform_device_info pdevinfo = { + .parent = parent, + .name = name, + .id = id, + .res = res, + .num_res = num, + .data = data, + .size_data = size, + .dma_mask = 0, + }; + + return platform_device_register_full(&pdevinfo); +} /** * platform_device_register_simple - add a platform-level device and its resources @@ -146,6 +190,23 @@ static inline void platform_set_drvdata(struct platform_device *pdev, void *data dev_set_drvdata(&pdev->dev, data); } +/* module_platform_driver() - Helper macro for drivers that don't do + * anything special in module init/exit. This eliminates a lot of + * boilerplate. Each module may only use this macro once, and + * calling it replaces module_init() and module_exit() + */ +#define module_platform_driver(__platform_driver) \ +static int __init __platform_driver##_init(void) \ +{ \ + return platform_driver_register(&(__platform_driver)); \ +} \ +module_init(__platform_driver##_init); \ +static void __exit __platform_driver##_exit(void) \ +{ \ + platform_driver_unregister(&(__platform_driver)); \ +} \ +module_exit(__platform_driver##_exit); + extern struct platform_device *platform_create_bundle(struct platform_driver *driver, int (*probe)(struct platform_device *), struct resource *res, unsigned int n_res, diff --git a/include/linux/pm.h b/include/linux/pm.h index f7c84c9abd30..f15acb646813 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -326,6 +326,7 @@ extern struct dev_pm_ops generic_subsys_pm_ops; * requested by a driver. */ +#define PM_EVENT_INVALID (-1) #define PM_EVENT_ON 0x0000 #define PM_EVENT_FREEZE 0x0001 #define PM_EVENT_SUSPEND 0x0002 @@ -346,6 +347,7 @@ extern struct dev_pm_ops generic_subsys_pm_ops; #define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND) #define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME) +#define PMSG_INVALID ((struct pm_message){ .event = PM_EVENT_INVALID, }) #define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) #define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) #define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) @@ -366,6 +368,8 @@ extern struct dev_pm_ops generic_subsys_pm_ops; #define PMSG_AUTO_RESUME ((struct pm_message) \ { .event = PM_EVENT_AUTO_RESUME, }) +#define PMSG_IS_AUTO(msg) (((msg).event & PM_EVENT_AUTO) != 0) + /** * Device run-time power management status. * @@ -421,6 +425,22 @@ enum rpm_request { struct wakeup_source; +struct pm_domain_data { + struct list_head list_node; + struct device *dev; +}; + +struct pm_subsys_data { + spinlock_t lock; + unsigned int refcount; +#ifdef CONFIG_PM_CLK + struct list_head clock_list; +#endif +#ifdef CONFIG_PM_GENERIC_DOMAINS + struct pm_domain_data *domain_data; +#endif +}; + struct dev_pm_info { pm_message_t power_state; unsigned int can_wakeup:1; @@ -432,6 +452,7 @@ struct dev_pm_info { struct list_head entry; struct completion completion; struct wakeup_source *wakeup; + bool wakeup_path:1; #else unsigned int should_wakeup:1; #endif @@ -462,10 +483,13 @@ struct dev_pm_info { unsigned long suspended_jiffies; unsigned long accounting_timestamp; #endif - void *subsys_data; /* Owned by the subsystem. */ + struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */ + struct pm_qos_constraints *constraints; }; extern void update_pm_runtime_accounting(struct device *dev); +extern int dev_pm_get_subsys_data(struct device *dev); +extern int dev_pm_put_subsys_data(struct device *dev); /* * Power domains provide callbacks that are executed during system suspend, diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h new file mode 100644 index 000000000000..8348866e7b05 --- /dev/null +++ b/include/linux/pm_clock.h @@ -0,0 +1,71 @@ +/* + * pm_clock.h - Definitions and headers related to device clocks. + * + * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp. + * + * This file is released under the GPLv2. + */ + +#ifndef _LINUX_PM_CLOCK_H +#define _LINUX_PM_CLOCK_H + +#include <linux/device.h> +#include <linux/notifier.h> + +struct pm_clk_notifier_block { + struct notifier_block nb; + struct dev_pm_domain *pm_domain; + char *con_ids[]; +}; + +#ifdef CONFIG_PM_CLK +static inline bool pm_clk_no_clocks(struct device *dev) +{ + return dev && dev->power.subsys_data + && list_empty(&dev->power.subsys_data->clock_list); +} + +extern void pm_clk_init(struct device *dev); +extern int pm_clk_create(struct device *dev); +extern void pm_clk_destroy(struct device *dev); +extern int pm_clk_add(struct device *dev, const char *con_id); +extern void pm_clk_remove(struct device *dev, const char *con_id); +extern int pm_clk_suspend(struct device *dev); +extern int pm_clk_resume(struct device *dev); +#else +static inline bool pm_clk_no_clocks(struct device *dev) +{ + return true; +} +static inline void pm_clk_init(struct device *dev) +{ +} +static inline int pm_clk_create(struct device *dev) +{ + return -EINVAL; +} +static inline void pm_clk_destroy(struct device *dev) +{ +} +static inline int pm_clk_add(struct device *dev, const char *con_id) +{ + return -EINVAL; +} +static inline void pm_clk_remove(struct device *dev, const char *con_id) +{ +} +#define pm_clk_suspend NULL +#define pm_clk_resume NULL +#endif + +#ifdef CONFIG_HAVE_CLK +extern void pm_clk_add_notifier(struct bus_type *bus, + struct pm_clk_notifier_block *clknb); +#else +static inline void pm_clk_add_notifier(struct bus_type *bus, + struct pm_clk_notifier_block *clknb) +{ +} +#endif + +#endif diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index f9ec1736a116..65633e5a2bc0 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -13,6 +13,7 @@ enum gpd_status { GPD_STATE_ACTIVE = 0, /* PM domain is active */ + GPD_STATE_WAIT_MASTER, /* PM domain's master is being waited for */ GPD_STATE_BUSY, /* Something is happening to the PM domain */ GPD_STATE_REPEAT, /* Power off in progress, to be repeated */ GPD_STATE_POWER_OFF, /* PM domain is off */ @@ -25,15 +26,14 @@ struct dev_power_governor { struct generic_pm_domain { struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ - struct list_head sd_node; /* Node in the parent's subdomain list */ - struct generic_pm_domain *parent; /* Parent PM domain */ - struct list_head sd_list; /* List of dubdomains */ + struct list_head master_links; /* Links with PM domain as a master */ + struct list_head slave_links; /* Links with PM domain as a slave */ struct list_head dev_list; /* List of devices */ struct mutex lock; struct dev_power_governor *gov; struct work_struct power_off_work; unsigned int in_progress; /* Number of devices being suspended now */ - unsigned int sd_count; /* Number of subdomains with power "on" */ + atomic_t sd_count; /* Number of subdomains with power "on" */ enum gpd_status status; /* Current state of the domain */ wait_queue_head_t status_wait_queue; struct task_struct *poweroff_task; /* Powering off task */ @@ -42,6 +42,7 @@ struct generic_pm_domain { unsigned int suspended_count; /* System suspend device counter */ unsigned int prepared_count; /* Suspend counter of prepared devices */ bool suspend_power_off; /* Power status before system suspend */ + bool dev_irq_safe; /* Device callbacks are IRQ-safe */ int (*power_off)(struct generic_pm_domain *domain); int (*power_on)(struct generic_pm_domain *domain); int (*start_device)(struct device *dev); @@ -54,12 +55,23 @@ static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) return container_of(pd, struct generic_pm_domain, domain); } -struct dev_list_entry { - struct list_head node; - struct device *dev; +struct gpd_link { + struct generic_pm_domain *master; + struct list_head master_node; + struct generic_pm_domain *slave; + struct list_head slave_node; +}; + +struct generic_pm_domain_data { + struct pm_domain_data base; bool need_restore; }; +static inline struct generic_pm_domain_data *to_gpd_data(struct pm_domain_data *pdd) +{ + return container_of(pdd, struct generic_pm_domain_data, base); +} + #ifdef CONFIG_PM_GENERIC_DOMAINS extern int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev); diff --git a/include/linux/pm_qos.h b/include/linux/pm_qos.h new file mode 100644 index 000000000000..83b0ea302a80 --- /dev/null +++ b/include/linux/pm_qos.h @@ -0,0 +1,155 @@ +#ifndef _LINUX_PM_QOS_H +#define _LINUX_PM_QOS_H +/* interface for the pm_qos_power infrastructure of the linux kernel. + * + * Mark Gross <mgross@linux.intel.com> + */ +#include <linux/plist.h> +#include <linux/notifier.h> +#include <linux/miscdevice.h> +#include <linux/device.h> + +#define PM_QOS_RESERVED 0 +#define PM_QOS_CPU_DMA_LATENCY 1 +#define PM_QOS_NETWORK_LATENCY 2 +#define PM_QOS_NETWORK_THROUGHPUT 3 + +#define PM_QOS_NUM_CLASSES 4 +#define PM_QOS_DEFAULT_VALUE -1 + +#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) +#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) +#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0 +#define PM_QOS_DEV_LAT_DEFAULT_VALUE 0 + +struct pm_qos_request { + struct plist_node node; + int pm_qos_class; +}; + +struct dev_pm_qos_request { + struct plist_node node; + struct device *dev; +}; + +enum pm_qos_type { + PM_QOS_UNITIALIZED, + PM_QOS_MAX, /* return the largest value */ + PM_QOS_MIN /* return the smallest value */ +}; + +/* + * Note: The lockless read path depends on the CPU accessing + * target_value atomically. Atomic access is only guaranteed on all CPU + * types linux supports for 32 bit quantites + */ +struct pm_qos_constraints { + struct plist_head list; + s32 target_value; /* Do not change to 64 bit */ + s32 default_value; + enum pm_qos_type type; + struct blocking_notifier_head *notifiers; +}; + +/* Action requested to pm_qos_update_target */ +enum pm_qos_req_action { + PM_QOS_ADD_REQ, /* Add a new request */ + PM_QOS_UPDATE_REQ, /* Update an existing request */ + PM_QOS_REMOVE_REQ /* Remove an existing request */ +}; + +static inline int dev_pm_qos_request_active(struct dev_pm_qos_request *req) +{ + return req->dev != 0; +} + +#ifdef CONFIG_PM +int pm_qos_update_target(struct pm_qos_constraints *c, struct plist_node *node, + enum pm_qos_req_action action, int value); +void pm_qos_add_request(struct pm_qos_request *req, int pm_qos_class, + s32 value); +void pm_qos_update_request(struct pm_qos_request *req, + s32 new_value); +void pm_qos_remove_request(struct pm_qos_request *req); + +int pm_qos_request(int pm_qos_class); +int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier); +int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier); +int pm_qos_request_active(struct pm_qos_request *req); +s32 pm_qos_read_value(struct pm_qos_constraints *c); + +s32 dev_pm_qos_read_value(struct device *dev); +int dev_pm_qos_add_request(struct device *dev, struct dev_pm_qos_request *req, + s32 value); +int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value); +int dev_pm_qos_remove_request(struct dev_pm_qos_request *req); +int dev_pm_qos_add_notifier(struct device *dev, + struct notifier_block *notifier); +int dev_pm_qos_remove_notifier(struct device *dev, + struct notifier_block *notifier); +int dev_pm_qos_add_global_notifier(struct notifier_block *notifier); +int dev_pm_qos_remove_global_notifier(struct notifier_block *notifier); +void dev_pm_qos_constraints_init(struct device *dev); +void dev_pm_qos_constraints_destroy(struct device *dev); +#else +static inline int pm_qos_update_target(struct pm_qos_constraints *c, + struct plist_node *node, + enum pm_qos_req_action action, + int value) + { return 0; } +static inline void pm_qos_add_request(struct pm_qos_request *req, + int pm_qos_class, s32 value) + { return; } +static inline void pm_qos_update_request(struct pm_qos_request *req, + s32 new_value) + { return; } +static inline void pm_qos_remove_request(struct pm_qos_request *req) + { return; } + +static inline int pm_qos_request(int pm_qos_class) + { return 0; } +static inline int pm_qos_add_notifier(int pm_qos_class, + struct notifier_block *notifier) + { return 0; } +static inline int pm_qos_remove_notifier(int pm_qos_class, + struct notifier_block *notifier) + { return 0; } +static inline int pm_qos_request_active(struct pm_qos_request *req) + { return 0; } +static inline s32 pm_qos_read_value(struct pm_qos_constraints *c) + { return 0; } + +static inline s32 dev_pm_qos_read_value(struct device *dev) + { return 0; } +static inline int dev_pm_qos_add_request(struct device *dev, + struct dev_pm_qos_request *req, + s32 value) + { return 0; } +static inline int dev_pm_qos_update_request(struct dev_pm_qos_request *req, + s32 new_value) + { return 0; } +static inline int dev_pm_qos_remove_request(struct dev_pm_qos_request *req) + { return 0; } +static inline int dev_pm_qos_add_notifier(struct device *dev, + struct notifier_block *notifier) + { return 0; } +static inline int dev_pm_qos_remove_notifier(struct device *dev, + struct notifier_block *notifier) + { return 0; } +static inline int dev_pm_qos_add_global_notifier( + struct notifier_block *notifier) + { return 0; } +static inline int dev_pm_qos_remove_global_notifier( + struct notifier_block *notifier) + { return 0; } +static inline void dev_pm_qos_constraints_init(struct device *dev) +{ + dev->power.power_state = PMSG_ON; +} +static inline void dev_pm_qos_constraints_destroy(struct device *dev) +{ + dev->power.power_state = PMSG_INVALID; +} +#endif + +#endif diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h deleted file mode 100644 index a7d87f911cab..000000000000 --- a/include/linux/pm_qos_params.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _LINUX_PM_QOS_PARAMS_H -#define _LINUX_PM_QOS_PARAMS_H -/* interface for the pm_qos_power infrastructure of the linux kernel. - * - * Mark Gross <mgross@linux.intel.com> - */ -#include <linux/plist.h> -#include <linux/notifier.h> -#include <linux/miscdevice.h> - -#define PM_QOS_RESERVED 0 -#define PM_QOS_CPU_DMA_LATENCY 1 -#define PM_QOS_NETWORK_LATENCY 2 -#define PM_QOS_NETWORK_THROUGHPUT 3 - -#define PM_QOS_NUM_CLASSES 4 -#define PM_QOS_DEFAULT_VALUE -1 - -#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) -#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) -#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0 - -struct pm_qos_request_list { - struct plist_node list; - int pm_qos_class; -}; - -void pm_qos_add_request(struct pm_qos_request_list *l, int pm_qos_class, s32 value); -void pm_qos_update_request(struct pm_qos_request_list *pm_qos_req, - s32 new_value); -void pm_qos_remove_request(struct pm_qos_request_list *pm_qos_req); - -int pm_qos_request(int pm_qos_class); -int pm_qos_add_notifier(int pm_qos_class, struct notifier_block *notifier); -int pm_qos_remove_notifier(int pm_qos_class, struct notifier_block *notifier); -int pm_qos_request_active(struct pm_qos_request_list *req); - -#endif diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index daac05d751b2..70b284024d9e 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -251,46 +251,4 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev) __pm_runtime_use_autosuspend(dev, false); } -struct pm_clk_notifier_block { - struct notifier_block nb; - struct dev_pm_domain *pm_domain; - char *con_ids[]; -}; - -#ifdef CONFIG_PM_CLK -extern int pm_clk_init(struct device *dev); -extern void pm_clk_destroy(struct device *dev); -extern int pm_clk_add(struct device *dev, const char *con_id); -extern void pm_clk_remove(struct device *dev, const char *con_id); -extern int pm_clk_suspend(struct device *dev); -extern int pm_clk_resume(struct device *dev); -#else -static inline int pm_clk_init(struct device *dev) -{ - return -EINVAL; -} -static inline void pm_clk_destroy(struct device *dev) -{ -} -static inline int pm_clk_add(struct device *dev, const char *con_id) -{ - return -EINVAL; -} -static inline void pm_clk_remove(struct device *dev, const char *con_id) -{ -} -#define pm_clk_suspend NULL -#define pm_clk_resume NULL -#endif - -#ifdef CONFIG_HAVE_CLK -extern void pm_clk_add_notifier(struct bus_type *bus, - struct pm_clk_notifier_block *clknb); -#else -static inline void pm_clk_add_notifier(struct bus_type *bus, - struct pm_clk_notifier_block *clknb) -{ -} -#endif - #endif diff --git a/include/linux/posix-timers.h b/include/linux/posix-timers.h index 959c14132f46..042058fdb0af 100644 --- a/include/linux/posix-timers.h +++ b/include/linux/posix-timers.h @@ -81,7 +81,10 @@ struct k_itimer { unsigned long incr; unsigned long expires; } mmtimer; - struct alarm alarmtimer; + struct { + struct alarm alarmtimer; + ktime_t interval; + } alarm; struct rcu_head rcu; } it; }; diff --git a/include/linux/proportions.h b/include/linux/proportions.h index cf793bbbd05e..ef35bb73f69b 100644 --- a/include/linux/proportions.h +++ b/include/linux/proportions.h @@ -58,7 +58,7 @@ struct prop_local_percpu { */ int shift; unsigned long period; - spinlock_t lock; /* protect the snapshot state */ + raw_spinlock_t lock; /* protect the snapshot state */ }; int prop_local_init_percpu(struct prop_local_percpu *pl); @@ -106,11 +106,11 @@ struct prop_local_single { */ unsigned long period; int shift; - spinlock_t lock; /* protect the snapshot state */ + raw_spinlock_t lock; /* protect the snapshot state */ }; #define INIT_PROP_LOCAL_SINGLE(name) \ -{ .lock = __SPIN_LOCK_UNLOCKED(name.lock), \ +{ .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ } int prop_local_init_single(struct prop_local_single *pl); diff --git a/include/linux/random.h b/include/linux/random.h index d13059f3ea32..8f74538c96db 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -91,6 +91,19 @@ static inline void prandom32_seed(struct rnd_state *state, u64 seed) state->s3 = __seed(i, 15); } +#ifdef CONFIG_ARCH_RANDOM +# include <asm/archrandom.h> +#else +static inline int arch_get_random_long(unsigned long *v) +{ + return 0; +} +static inline int arch_get_random_int(unsigned int *v) +{ + return 0; +} +#endif + #endif /* __KERNEL___ */ #endif /* _LINUX_RANDOM_H */ diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 2f007157fab9..e11ccb4cf48d 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -8,7 +8,7 @@ #define DEFAULT_RATELIMIT_BURST 10 struct ratelimit_state { - spinlock_t lock; /* protect the state */ + raw_spinlock_t lock; /* protect the state */ int interval; int burst; @@ -20,7 +20,7 @@ struct ratelimit_state { #define DEFINE_RATELIMIT_STATE(name, interval_init, burst_init) \ \ struct ratelimit_state name = { \ - .lock = __SPIN_LOCK_UNLOCKED(name.lock), \ + .lock = __RAW_SPIN_LOCK_UNLOCKED(name.lock), \ .interval = interval_init, \ .burst = burst_init, \ } @@ -28,7 +28,7 @@ struct ratelimit_state { static inline void ratelimit_state_init(struct ratelimit_state *rs, int interval, int burst) { - spin_lock_init(&rs->lock); + raw_spin_lock_init(&rs->lock); rs->interval = interval; rs->burst = burst; rs->printed = 0; diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 8f4f881a0ad8..2cf4226ade7e 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -33,6 +33,7 @@ #ifndef __LINUX_RCUPDATE_H #define __LINUX_RCUPDATE_H +#include <linux/types.h> #include <linux/cache.h> #include <linux/spinlock.h> #include <linux/threads.h> @@ -64,32 +65,74 @@ static inline void rcutorture_record_progress(unsigned long vernum) #define ULONG_CMP_GE(a, b) (ULONG_MAX / 2 >= (a) - (b)) #define ULONG_CMP_LT(a, b) (ULONG_MAX / 2 < (a) - (b)) +/* Exported common interfaces */ + +#ifdef CONFIG_PREEMPT_RCU + /** - * struct rcu_head - callback structure for use with RCU - * @next: next update requests in a list - * @func: actual update function to call after the grace period. + * call_rcu() - Queue an RCU callback for invocation after a grace period. + * @head: structure to be used for queueing the RCU updates. + * @func: actual callback function to be invoked after the grace period + * + * The callback function will be invoked some time after a full grace + * period elapses, in other words after all pre-existing RCU read-side + * critical sections have completed. However, the callback function + * might well execute concurrently with RCU read-side critical sections + * that started after call_rcu() was invoked. RCU read-side critical + * sections are delimited by rcu_read_lock() and rcu_read_unlock(), + * and may be nested. */ -struct rcu_head { - struct rcu_head *next; - void (*func)(struct rcu_head *head); -}; +extern void call_rcu(struct rcu_head *head, + void (*func)(struct rcu_head *head)); -/* Exported common interfaces */ +#else /* #ifdef CONFIG_PREEMPT_RCU */ + +/* In classic RCU, call_rcu() is just call_rcu_sched(). */ +#define call_rcu call_rcu_sched + +#endif /* #else #ifdef CONFIG_PREEMPT_RCU */ + +/** + * call_rcu_bh() - Queue an RCU for invocation after a quicker grace period. + * @head: structure to be used for queueing the RCU updates. + * @func: actual callback function to be invoked after the grace period + * + * The callback function will be invoked some time after a full grace + * period elapses, in other words after all currently executing RCU + * read-side critical sections have completed. call_rcu_bh() assumes + * that the read-side critical sections end on completion of a softirq + * handler. This means that read-side critical sections in process + * context must not be interrupted by softirqs. This interface is to be + * used when most of the read-side critical sections are in softirq context. + * RCU read-side critical sections are delimited by : + * - rcu_read_lock() and rcu_read_unlock(), if in interrupt context. + * OR + * - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context. + * These may be nested. + */ +extern void call_rcu_bh(struct rcu_head *head, + void (*func)(struct rcu_head *head)); + +/** + * call_rcu_sched() - Queue an RCU for invocation after sched grace period. + * @head: structure to be used for queueing the RCU updates. + * @func: actual callback function to be invoked after the grace period + * + * The callback function will be invoked some time after a full grace + * period elapses, in other words after all currently executing RCU + * read-side critical sections have completed. call_rcu_sched() assumes + * that the read-side critical sections end on enabling of preemption + * or on voluntary preemption. + * RCU read-side critical sections are delimited by : + * - rcu_read_lock_sched() and rcu_read_unlock_sched(), + * OR + * anything that disables preemption. + * These may be nested. + */ extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); -extern void synchronize_sched(void); -extern void rcu_barrier_bh(void); -extern void rcu_barrier_sched(void); - -static inline void __rcu_read_lock_bh(void) -{ - local_bh_disable(); -} -static inline void __rcu_read_unlock_bh(void) -{ - local_bh_enable(); -} +extern void synchronize_sched(void); #ifdef CONFIG_PREEMPT_RCU @@ -152,6 +195,15 @@ static inline void rcu_exit_nohz(void) #endif /* #else #ifdef CONFIG_NO_HZ */ +/* + * Infrastructure to implement the synchronize_() primitives in + * TREE_RCU and rcu_barrier_() primitives in TINY_RCU. + */ + +typedef void call_rcu_func_t(struct rcu_head *head, + void (*func)(struct rcu_head *head)); +void wait_rcu_gp(call_rcu_func_t crf); + #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) #include <linux/rcutree.h> #elif defined(CONFIG_TINY_RCU) || defined(CONFIG_TINY_PREEMPT_RCU) @@ -297,19 +349,31 @@ extern int rcu_my_thread_group_empty(void); /** * rcu_lockdep_assert - emit lockdep splat if specified condition not met * @c: condition to check + * @s: informative message */ -#define rcu_lockdep_assert(c) \ +#define rcu_lockdep_assert(c, s) \ do { \ static bool __warned; \ if (debug_lockdep_rcu_enabled() && !__warned && !(c)) { \ __warned = true; \ - lockdep_rcu_dereference(__FILE__, __LINE__); \ + lockdep_rcu_suspicious(__FILE__, __LINE__, s); \ } \ } while (0) +#define rcu_sleep_check() \ + do { \ + rcu_lockdep_assert(!lock_is_held(&rcu_bh_lock_map), \ + "Illegal context switch in RCU-bh" \ + " read-side critical section"); \ + rcu_lockdep_assert(!lock_is_held(&rcu_sched_lock_map), \ + "Illegal context switch in RCU-sched"\ + " read-side critical section"); \ + } while (0) + #else /* #ifdef CONFIG_PROVE_RCU */ -#define rcu_lockdep_assert(c) do { } while (0) +#define rcu_lockdep_assert(c, s) do { } while (0) +#define rcu_sleep_check() do { } while (0) #endif /* #else #ifdef CONFIG_PROVE_RCU */ @@ -338,14 +402,16 @@ extern int rcu_my_thread_group_empty(void); #define __rcu_dereference_check(p, c, space) \ ({ \ typeof(*p) *_________p1 = (typeof(*p)*__force )ACCESS_ONCE(p); \ - rcu_lockdep_assert(c); \ + rcu_lockdep_assert(c, "suspicious rcu_dereference_check()" \ + " usage"); \ rcu_dereference_sparse(p, space); \ smp_read_barrier_depends(); \ ((typeof(*p) __force __kernel *)(_________p1)); \ }) #define __rcu_dereference_protected(p, c, space) \ ({ \ - rcu_lockdep_assert(c); \ + rcu_lockdep_assert(c, "suspicious rcu_dereference_protected()" \ + " usage"); \ rcu_dereference_sparse(p, space); \ ((typeof(*p) __force __kernel *)(p)); \ }) @@ -359,15 +425,15 @@ extern int rcu_my_thread_group_empty(void); #define __rcu_dereference_index_check(p, c) \ ({ \ typeof(p) _________p1 = ACCESS_ONCE(p); \ - rcu_lockdep_assert(c); \ + rcu_lockdep_assert(c, \ + "suspicious rcu_dereference_index_check()" \ + " usage"); \ smp_read_barrier_depends(); \ (_________p1); \ }) #define __rcu_assign_pointer(p, v, space) \ ({ \ - if (!__builtin_constant_p(v) || \ - ((v) != NULL)) \ - smp_wmb(); \ + smp_wmb(); \ (p) = (typeof(*v) __force space *)(v); \ }) @@ -500,26 +566,6 @@ extern int rcu_my_thread_group_empty(void); #define rcu_dereference_protected(p, c) \ __rcu_dereference_protected((p), (c), __rcu) -/** - * rcu_dereference_bh_protected() - fetch RCU-bh pointer when updates prevented - * @p: The pointer to read, prior to dereferencing - * @c: The conditions under which the dereference will take place - * - * This is the RCU-bh counterpart to rcu_dereference_protected(). - */ -#define rcu_dereference_bh_protected(p, c) \ - __rcu_dereference_protected((p), (c), __rcu) - -/** - * rcu_dereference_sched_protected() - fetch RCU-sched pointer when updates prevented - * @p: The pointer to read, prior to dereferencing - * @c: The conditions under which the dereference will take place - * - * This is the RCU-sched counterpart to rcu_dereference_protected(). - */ -#define rcu_dereference_sched_protected(p, c) \ - __rcu_dereference_protected((p), (c), __rcu) - /** * rcu_dereference() - fetch RCU-protected pointer for dereferencing @@ -630,7 +676,7 @@ static inline void rcu_read_unlock(void) */ static inline void rcu_read_lock_bh(void) { - __rcu_read_lock_bh(); + local_bh_disable(); __acquire(RCU_BH); rcu_read_acquire_bh(); } @@ -644,7 +690,7 @@ static inline void rcu_read_unlock_bh(void) { rcu_read_release_bh(); __release(RCU_BH); - __rcu_read_unlock_bh(); + local_bh_enable(); } /** @@ -698,11 +744,18 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) * any prior initialization. Returns the value assigned. * * Inserts memory barriers on architectures that require them - * (pretty much all of them other than x86), and also prevents - * the compiler from reordering the code that initializes the - * structure after the pointer assignment. More importantly, this - * call documents which pointers will be dereferenced by RCU read-side - * code. + * (which is most of them), and also prevents the compiler from + * reordering the code that initializes the structure after the pointer + * assignment. More importantly, this call documents which pointers + * will be dereferenced by RCU read-side code. + * + * In some special cases, you may use RCU_INIT_POINTER() instead + * of rcu_assign_pointer(). RCU_INIT_POINTER() is a bit faster due + * to the fact that it does not constrain either the CPU or the compiler. + * That said, using RCU_INIT_POINTER() when you should have used + * rcu_assign_pointer() is a very bad thing that results in + * impossible-to-diagnose memory corruption. So please be careful. + * See the RCU_INIT_POINTER() comment header for details. */ #define rcu_assign_pointer(p, v) \ __rcu_assign_pointer((p), (v), __rcu) @@ -710,105 +763,38 @@ static inline notrace void rcu_read_unlock_sched_notrace(void) /** * RCU_INIT_POINTER() - initialize an RCU protected pointer * - * Initialize an RCU-protected pointer in such a way to avoid RCU-lockdep - * splats. + * Initialize an RCU-protected pointer in special cases where readers + * do not need ordering constraints on the CPU or the compiler. These + * special cases are: + * + * 1. This use of RCU_INIT_POINTER() is NULLing out the pointer -or- + * 2. The caller has taken whatever steps are required to prevent + * RCU readers from concurrently accessing this pointer -or- + * 3. The referenced data structure has already been exposed to + * readers either at compile time or via rcu_assign_pointer() -and- + * a. You have not made -any- reader-visible changes to + * this structure since then -or- + * b. It is OK for readers accessing this structure from its + * new location to see the old state of the structure. (For + * example, the changes were to statistical counters or to + * other state where exact synchronization is not required.) + * + * Failure to follow these rules governing use of RCU_INIT_POINTER() will + * result in impossible-to-diagnose memory corruption. As in the structures + * will look OK in crash dumps, but any concurrent RCU readers might + * see pre-initialized values of the referenced data structure. So + * please be very careful how you use RCU_INIT_POINTER()!!! + * + * If you are creating an RCU-protected linked structure that is accessed + * by a single external-to-structure RCU-protected pointer, then you may + * use RCU_INIT_POINTER() to initialize the internal RCU-protected + * pointers, but you must use rcu_assign_pointer() to initialize the + * external-to-structure pointer -after- you have completely initialized + * the reader-accessible portions of the linked structure. */ #define RCU_INIT_POINTER(p, v) \ p = (typeof(*v) __force __rcu *)(v) -/* Infrastructure to implement the synchronize_() primitives. */ - -struct rcu_synchronize { - struct rcu_head head; - struct completion completion; -}; - -extern void wakeme_after_rcu(struct rcu_head *head); - -#ifdef CONFIG_PREEMPT_RCU - -/** - * call_rcu() - Queue an RCU callback for invocation after a grace period. - * @head: structure to be used for queueing the RCU updates. - * @func: actual callback function to be invoked after the grace period - * - * The callback function will be invoked some time after a full grace - * period elapses, in other words after all pre-existing RCU read-side - * critical sections have completed. However, the callback function - * might well execute concurrently with RCU read-side critical sections - * that started after call_rcu() was invoked. RCU read-side critical - * sections are delimited by rcu_read_lock() and rcu_read_unlock(), - * and may be nested. - */ -extern void call_rcu(struct rcu_head *head, - void (*func)(struct rcu_head *head)); - -#else /* #ifdef CONFIG_PREEMPT_RCU */ - -/* In classic RCU, call_rcu() is just call_rcu_sched(). */ -#define call_rcu call_rcu_sched - -#endif /* #else #ifdef CONFIG_PREEMPT_RCU */ - -/** - * call_rcu_bh() - Queue an RCU for invocation after a quicker grace period. - * @head: structure to be used for queueing the RCU updates. - * @func: actual callback function to be invoked after the grace period - * - * The callback function will be invoked some time after a full grace - * period elapses, in other words after all currently executing RCU - * read-side critical sections have completed. call_rcu_bh() assumes - * that the read-side critical sections end on completion of a softirq - * handler. This means that read-side critical sections in process - * context must not be interrupted by softirqs. This interface is to be - * used when most of the read-side critical sections are in softirq context. - * RCU read-side critical sections are delimited by : - * - rcu_read_lock() and rcu_read_unlock(), if in interrupt context. - * OR - * - rcu_read_lock_bh() and rcu_read_unlock_bh(), if in process context. - * These may be nested. - */ -extern void call_rcu_bh(struct rcu_head *head, - void (*func)(struct rcu_head *head)); - -/* - * debug_rcu_head_queue()/debug_rcu_head_unqueue() are used internally - * by call_rcu() and rcu callback execution, and are therefore not part of the - * RCU API. Leaving in rcupdate.h because they are used by all RCU flavors. - */ - -#ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD -# define STATE_RCU_HEAD_READY 0 -# define STATE_RCU_HEAD_QUEUED 1 - -extern struct debug_obj_descr rcuhead_debug_descr; - -static inline void debug_rcu_head_queue(struct rcu_head *head) -{ - WARN_ON_ONCE((unsigned long)head & 0x3); - debug_object_activate(head, &rcuhead_debug_descr); - debug_object_active_state(head, &rcuhead_debug_descr, - STATE_RCU_HEAD_READY, - STATE_RCU_HEAD_QUEUED); -} - -static inline void debug_rcu_head_unqueue(struct rcu_head *head) -{ - debug_object_active_state(head, &rcuhead_debug_descr, - STATE_RCU_HEAD_QUEUED, - STATE_RCU_HEAD_READY); - debug_object_deactivate(head, &rcuhead_debug_descr); -} -#else /* !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ -static inline void debug_rcu_head_queue(struct rcu_head *head) -{ -} - -static inline void debug_rcu_head_unqueue(struct rcu_head *head) -{ -} -#endif /* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */ - static __always_inline bool __is_kfree_rcu_offset(unsigned long offset) { return offset < 4096; @@ -827,18 +813,6 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset) call_rcu(head, (rcu_callback)offset); } -extern void kfree(const void *); - -static inline void __rcu_reclaim(struct rcu_head *head) -{ - unsigned long offset = (unsigned long)head->func; - - if (__is_kfree_rcu_offset(offset)) - kfree((void *)head - offset); - else - head->func(head); -} - /** * kfree_rcu() - kfree an object after a grace period. * @ptr: pointer to kfree diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h index 52b3e0281fd0..00b7a5e493d2 100644 --- a/include/linux/rcutiny.h +++ b/include/linux/rcutiny.h @@ -27,9 +27,23 @@ #include <linux/cache.h> +#ifdef CONFIG_RCU_BOOST static inline void rcu_init(void) { } +#else /* #ifdef CONFIG_RCU_BOOST */ +void rcu_init(void); +#endif /* #else #ifdef CONFIG_RCU_BOOST */ + +static inline void rcu_barrier_bh(void) +{ + wait_rcu_gp(call_rcu_bh); +} + +static inline void rcu_barrier_sched(void) +{ + wait_rcu_gp(call_rcu_sched); +} #ifdef CONFIG_TINY_RCU @@ -45,9 +59,13 @@ static inline void rcu_barrier(void) #else /* #ifdef CONFIG_TINY_RCU */ -void rcu_barrier(void); void synchronize_rcu_expedited(void); +static inline void rcu_barrier(void) +{ + wait_rcu_gp(call_rcu); +} + #endif /* #else #ifdef CONFIG_TINY_RCU */ static inline void synchronize_rcu_bh(void) diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index e65d06634dd8..67458468f1a8 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -67,6 +67,8 @@ static inline void synchronize_rcu_bh_expedited(void) } extern void rcu_barrier(void); +extern void rcu_barrier_bh(void); +extern void rcu_barrier_sched(void); extern unsigned long rcutorture_testseq; extern unsigned long rcutorture_vernum; diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 60a65cd7e1a0..3daac2d8dc37 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -20,9 +20,77 @@ struct i2c_client; struct spi_device; +/* An enum of all the supported cache types */ +enum regcache_type { + REGCACHE_NONE, + REGCACHE_INDEXED, + REGCACHE_RBTREE, + REGCACHE_LZO +}; + +/** + * Default value for a register. We use an array of structs rather + * than a simple array as many modern devices have very sparse + * register maps. + * + * @reg: Register address. + * @def: Register default value. + */ +struct reg_default { + unsigned int reg; + unsigned int def; +}; + +/** + * Configuration for the register map of a device. + * + * @reg_bits: Number of bits in a register address, mandatory. + * @val_bits: Number of bits in a register value, mandatory. + * + * @writeable_reg: Optional callback returning true if the register + * can be written to. + * @readable_reg: Optional callback returning true if the register + * can be read from. + * @volatile_reg: Optional callback returning true if the register + * value can't be cached. + * @precious_reg: Optional callback returning true if the rgister + * should not be read outside of a call from the driver + * (eg, a clear on read interrupt status register). + * + * @max_register: Optional, specifies the maximum valid register index. + * @reg_defaults: Power on reset values for registers (for use with + * register cache support). + * @num_reg_defaults: Number of elements in reg_defaults. + * + * @read_flag_mask: Mask to be set in the top byte of the register when doing + * a read. + * @write_flag_mask: Mask to be set in the top byte of the register when doing + * a write. If both read_flag_mask and write_flag_mask are + * empty the regmap_bus default masks are used. + * + * @cache_type: The actual cache type. + * @reg_defaults_raw: Power on reset values for registers (for use with + * register cache support). + * @num_reg_defaults_raw: Number of elements in reg_defaults_raw. + */ struct regmap_config { int reg_bits; int val_bits; + + bool (*writeable_reg)(struct device *dev, unsigned int reg); + bool (*readable_reg)(struct device *dev, unsigned int reg); + bool (*volatile_reg)(struct device *dev, unsigned int reg); + bool (*precious_reg)(struct device *dev, unsigned int reg); + + unsigned int max_register; + struct reg_default *reg_defaults; + unsigned int num_reg_defaults; + enum regcache_type cache_type; + const void *reg_defaults_raw; + unsigned int num_reg_defaults_raw; + + u8 read_flag_mask; + u8 write_flag_mask; }; typedef int (*regmap_hw_write)(struct device *dev, const void *data, @@ -37,25 +105,18 @@ typedef int (*regmap_hw_read)(struct device *dev, /** * Description of a hardware bus for the register map infrastructure. * - * @list: Internal use. - * @type: Bus type, used to identify bus to be used for a device. * @write: Write operation. * @gather_write: Write operation with split register/value, return -ENOTSUPP * if not implemented on a given device. * @read: Read operation. Data is returned in the buffer used to transmit * data. - * @owner: Module with the bus implementation, used to pin the implementation - * in memory. * @read_flag_mask: Mask to be set in the top byte of the register when doing * a read. */ struct regmap_bus { - struct list_head list; - struct bus_type *type; regmap_hw_write write; regmap_hw_gather_write gather_write; regmap_hw_read read; - struct module *owner; u8 read_flag_mask; }; @@ -79,4 +140,8 @@ int regmap_bulk_read(struct regmap *map, unsigned int reg, void *val, int regmap_update_bits(struct regmap *map, unsigned int reg, unsigned int mask, unsigned int val); +int regcache_sync(struct regmap *map); +void regcache_cache_only(struct regmap *map, bool enable); +void regcache_cache_bypass(struct regmap *map, bool enable); + #endif diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index b47771aa5718..f7756d146c61 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -141,6 +141,7 @@ int regulator_enable(struct regulator *regulator); int regulator_disable(struct regulator *regulator); int regulator_force_disable(struct regulator *regulator); int regulator_is_enabled(struct regulator *regulator); +int regulator_disable_deferred(struct regulator *regulator, int ms); int regulator_bulk_get(struct device *dev, int num_consumers, struct regulator_bulk_data *consumers); @@ -211,6 +212,12 @@ static inline int regulator_disable(struct regulator *regulator) return 0; } +static inline int regulator_disable_deferred(struct regulator *regulator, + int ms) +{ + return 0; +} + static inline int regulator_is_enabled(struct regulator *regulator) { return 1; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 1a80bc77517d..12a1aa04b720 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -199,6 +199,9 @@ struct regulator_dev { struct regulation_constraints *constraints; struct regulator *supply; /* for tree */ + struct delayed_work disable_work; + int deferred_disables; + void *reg_data; /* regulator_dev data */ #ifdef CONFIG_DEBUG_FS diff --git a/include/linux/rfkill-gpio.h b/include/linux/rfkill-gpio.h index a175d0598033..4d09f6eab359 100644 --- a/include/linux/rfkill-gpio.h +++ b/include/linux/rfkill-gpio.h @@ -30,6 +30,8 @@ * @reset_gpio: GPIO which is used for reseting rfkill switch * @shutdown_gpio: GPIO which is used for shutdown of rfkill switch * @power_clk_name: [optional] name of clk to turn off while blocked + * @gpio_runtime_close: clean up platform specific gpio configuration + * @gpio_runtime_setup: set up platform specific gpio configuration */ struct rfkill_gpio_platform_data { @@ -38,6 +40,8 @@ struct rfkill_gpio_platform_data { int shutdown_gpio; const char *power_clk_name; enum rfkill_type type; + void (*gpio_runtime_close)(struct platform_device *); + int (*gpio_runtime_setup)(struct platform_device *); }; #endif /* __RFKILL_GPIO_H */ diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h index b891de96000f..67be0376d8e3 100644 --- a/include/linux/ring_buffer.h +++ b/include/linux/ring_buffer.h @@ -154,6 +154,8 @@ void ring_buffer_record_enable(struct ring_buffer *buffer); void ring_buffer_record_disable_cpu(struct ring_buffer *buffer, int cpu); void ring_buffer_record_enable_cpu(struct ring_buffer *buffer, int cpu); +unsigned long ring_buffer_oldest_event_ts(struct ring_buffer *buffer, int cpu); +unsigned long ring_buffer_bytes_cpu(struct ring_buffer *buffer, int cpu); unsigned long ring_buffer_entries(struct ring_buffer *buffer); unsigned long ring_buffer_overruns(struct ring_buffer *buffer); unsigned long ring_buffer_entries_cpu(struct ring_buffer *buffer, int cpu); diff --git a/include/linux/rose.h b/include/linux/rose.h index c7b4b184c82e..1fcfe95893b8 100644 --- a/include/linux/rose.h +++ b/include/linux/rose.h @@ -7,6 +7,9 @@ #ifndef ROSE_KERNEL_H #define ROSE_KERNEL_H +#include <linux/socket.h> +#include <linux/ax25.h> + #define ROSE_MTU 251 #define ROSE_MAX_DIGIS 6 @@ -44,7 +47,7 @@ typedef struct { } rose_address; struct sockaddr_rose { - sa_family_t srose_family; + __kernel_sa_family_t srose_family; rose_address srose_addr; ax25_address srose_call; int srose_ndigis; @@ -52,7 +55,7 @@ struct sockaddr_rose { }; struct full_sockaddr_rose { - sa_family_t srose_family; + __kernel_sa_family_t srose_family; rose_address srose_addr; ax25_address srose_call; unsigned int srose_ndigis; diff --git a/include/linux/rwsem-spinlock.h b/include/linux/rwsem-spinlock.h index 34701241b673..d5b13bc07a0b 100644 --- a/include/linux/rwsem-spinlock.h +++ b/include/linux/rwsem-spinlock.h @@ -22,7 +22,7 @@ */ struct rw_semaphore { __s32 activity; - spinlock_t wait_lock; + raw_spinlock_t wait_lock; struct list_head wait_list; #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; diff --git a/include/linux/rwsem.h b/include/linux/rwsem.h index 6a6741440cb7..63d406554391 100644 --- a/include/linux/rwsem.h +++ b/include/linux/rwsem.h @@ -25,7 +25,7 @@ struct rw_semaphore; /* All arch specific implementations share the same struct */ struct rw_semaphore { long count; - spinlock_t wait_lock; + raw_spinlock_t wait_lock; struct list_head wait_list; #ifdef CONFIG_DEBUG_LOCK_ALLOC struct lockdep_map dep_map; @@ -56,9 +56,11 @@ static inline int rwsem_is_locked(struct rw_semaphore *sem) # define __RWSEM_DEP_MAP_INIT(lockname) #endif -#define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED(name.wait_lock), \ - LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) } +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, \ + __RAW_SPIN_LOCK_UNLOCKED(name.wait_lock), \ + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) diff --git a/include/linux/sched.h b/include/linux/sched.h index 41d0237fd449..e8acce717d2a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -90,6 +90,7 @@ struct sched_param { #include <linux/task_io_accounting.h> #include <linux/latencytop.h> #include <linux/cred.h> +#include <linux/llist.h> #include <asm/processor.h> @@ -270,7 +271,6 @@ extern void init_idle_bootup_task(struct task_struct *idle); extern int runqueue_is_locked(int cpu); -extern cpumask_var_t nohz_cpu_mask; #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ) extern void select_nohz_load_balancer(int stop_tick); extern int get_nohz_timer_target(void); @@ -510,7 +510,7 @@ struct task_cputime { struct thread_group_cputimer { struct task_cputime cputime; int running; - spinlock_t lock; + raw_spinlock_t lock; }; #include <linux/rwsem.h> @@ -1225,7 +1225,7 @@ struct task_struct { unsigned int ptrace; #ifdef CONFIG_SMP - struct task_struct *wake_entry; + struct llist_node wake_entry; int on_cpu; #endif int on_rq; @@ -1260,9 +1260,6 @@ struct task_struct { #ifdef CONFIG_PREEMPT_RCU int rcu_read_lock_nesting; char rcu_read_unlock_special; -#if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU) - int rcu_boosted; -#endif /* #if defined(CONFIG_RCU_BOOST) && defined(CONFIG_TREE_PREEMPT_RCU) */ struct list_head rcu_node_entry; #endif /* #ifdef CONFIG_PREEMPT_RCU */ #ifdef CONFIG_TREE_PREEMPT_RCU @@ -2039,6 +2036,10 @@ static inline void sched_autogroup_fork(struct signal_struct *sig) { } static inline void sched_autogroup_exit(struct signal_struct *sig) { } #endif +#ifdef CONFIG_CFS_BANDWIDTH +extern unsigned int sysctl_sched_cfs_bandwidth_slice; +#endif + #ifdef CONFIG_RT_MUTEXES extern int rt_mutex_getprio(struct task_struct *p); extern void rt_mutex_setprio(struct task_struct *p, int prio); @@ -2165,7 +2166,8 @@ extern int force_sigsegv(int, struct task_struct *); extern int force_sig_info(int, struct siginfo *, struct task_struct *); extern int __kill_pgrp_info(int sig, struct siginfo *info, struct pid *pgrp); extern int kill_pid_info(int sig, struct siginfo *info, struct pid *pid); -extern int kill_pid_info_as_uid(int, struct siginfo *, struct pid *, uid_t, uid_t, u32); +extern int kill_pid_info_as_cred(int, struct siginfo *, struct pid *, + const struct cred *, u32); extern int kill_pgrp(struct pid *pid, int sig, int priv); extern int kill_pid(struct pid *pid, int sig, int priv); extern int kill_proc_info(int, struct siginfo *, pid_t); @@ -2565,7 +2567,7 @@ void thread_group_cputimer(struct task_struct *tsk, struct task_cputime *times); static inline void thread_group_cputime_init(struct signal_struct *sig) { - spin_lock_init(&sig->cputimer.lock); + raw_spin_lock_init(&sig->cputimer.lock); } /* diff --git a/include/linux/security.h b/include/linux/security.h index ebd2a53a3d07..19d8e04e1688 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -36,6 +36,7 @@ #include <linux/key.h> #include <linux/xfrm.h> #include <linux/slab.h> +#include <linux/xattr.h> #include <net/flow.h> /* Maximum number of letters for an LSM name string */ @@ -147,6 +148,10 @@ extern int mmap_min_addr_handler(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); #endif +/* security_inode_init_security callback function to write xattrs */ +typedef int (*initxattrs) (struct inode *inode, + const struct xattr *xattr_array, void *fs_data); + #ifdef CONFIG_SECURITY struct security_mnt_opts { @@ -1367,7 +1372,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @inode_getsecctx: * Returns a string containing all relavent security context information * - * @inode we wish to set the security context of. + * @inode we wish to get the security context of. * @ctx is a pointer in which to place the allocated security context. * @ctxlen points to the place to put the length of @ctx. * This is the main security structure. @@ -1655,6 +1660,8 @@ struct security_operations { extern int security_init(void); extern int security_module_enable(struct security_operations *ops); extern int register_security(struct security_operations *ops); +extern void __init security_fixup_ops(struct security_operations *ops); + /* Security operations */ int security_ptrace_access_check(struct task_struct *child, unsigned int mode); @@ -1704,8 +1711,11 @@ int security_sb_parse_opts_str(char *options, struct security_mnt_opts *opts); int security_inode_alloc(struct inode *inode); void security_inode_free(struct inode *inode); int security_inode_init_security(struct inode *inode, struct inode *dir, - const struct qstr *qstr, char **name, - void **value, size_t *len); + const struct qstr *qstr, + initxattrs initxattrs, void *fs_data); +int security_old_inode_init_security(struct inode *inode, struct inode *dir, + const struct qstr *qstr, char **name, + void **value, size_t *len); int security_inode_create(struct inode *dir, struct dentry *dentry, int mode); int security_inode_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_dentry); @@ -2034,11 +2044,19 @@ static inline void security_inode_free(struct inode *inode) static inline int security_inode_init_security(struct inode *inode, struct inode *dir, const struct qstr *qstr, - char **name, - void **value, - size_t *len) + initxattrs initxattrs, + void *fs_data) { - return -EOPNOTSUPP; + return 0; +} + +static inline int security_old_inode_init_security(struct inode *inode, + struct inode *dir, + const struct qstr *qstr, + char **name, void **value, + size_t *len) +{ + return 0; } static inline int security_inode_create(struct inode *dir, diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h index 39fa04966aa8..dc368b8ce215 100644 --- a/include/linux/semaphore.h +++ b/include/linux/semaphore.h @@ -14,14 +14,14 @@ /* Please don't access any members of this structure directly */ struct semaphore { - spinlock_t lock; + raw_spinlock_t lock; unsigned int count; struct list_head wait_list; }; #define __SEMAPHORE_INITIALIZER(name, n) \ { \ - .lock = __SPIN_LOCK_UNLOCKED((name).lock), \ + .lock = __RAW_SPIN_LOCK_UNLOCKED((name).lock), \ .count = n, \ .wait_list = LIST_HEAD_INIT((name).wait_list), \ } diff --git a/include/linux/serial.h b/include/linux/serial.h index ef914061511e..97ff8e27a6cc 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -211,6 +211,7 @@ struct serial_rs485 { #define SER_RS485_RTS_ON_SEND (1 << 1) #define SER_RS485_RTS_AFTER_SEND (1 << 2) #define SER_RS485_RTS_BEFORE_SEND (1 << 3) +#define SER_RS485_RX_DURING_TX (1 << 4) __u32 delay_rts_before_send; /* Milliseconds */ __u32 delay_rts_after_send; /* Milliseconds */ __u32 padding[5]; /* Memory is cheap, new structs diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 97f5b45bbc07..1f05bbeac01e 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -35,6 +35,7 @@ struct plat_serial8250_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned old); }; @@ -80,6 +81,7 @@ extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); extern void serial8250_do_pm(struct uart_port *port, unsigned int state, unsigned int oldstate); +int serial8250_handle_irq(struct uart_port *port, unsigned int iir); extern void serial8250_set_isa_configurator(void (*v) (int port, struct uart_port *up, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index a5c31146a337..eadf33d0abba 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -46,7 +46,8 @@ #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ #define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ -#define PORT_MAX_8250 20 /* max port ID */ +#define PORT_XR17D15X 21 /* Exar XR17D15x UART */ +#define PORT_MAX_8250 21 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -300,6 +301,7 @@ struct uart_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); unsigned int irq; /* irq number */ @@ -317,9 +319,7 @@ struct uart_port { #define UPIO_MEM32 (3) #define UPIO_AU (4) /* Au1x00 type IO */ #define UPIO_TSI (5) /* Tsi108/109 type IO */ -#define UPIO_DWAPB (6) /* DesignWare APB UART */ -#define UPIO_RM9000 (7) /* RM9000 type IO */ -#define UPIO_DWAPB32 (8) /* DesignWare APB UART (32 bit accesses) */ +#define UPIO_RM9000 (6) /* RM9000 type IO */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ @@ -350,6 +350,7 @@ struct uart_port { #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24)) +#define UPF_EXAR_EFR ((__force upf_t) (1 << 25)) /* The exact UART type is known and should not be probed. */ #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27)) #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28)) @@ -384,7 +385,6 @@ struct uart_state { int pm_state; struct circ_buf xmit; - struct tasklet_struct tlet; struct uart_port *uart_port; }; diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index c75bda37c18e..8ce70d76f836 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -152,6 +152,7 @@ * LCR=0xBF (or DLAB=1 for 16C660) */ #define UART_EFR 2 /* I/O: Extended Features Register */ +#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */ #define UART_EFR_CTS 0x80 /* CTS flow control */ #define UART_EFR_RTS 0x40 /* RTS flow control */ #define UART_EFR_SCD 0x20 /* Special character detect */ diff --git a/include/linux/serio.h b/include/linux/serio.h index e26f4788845f..be7dfb0f12d0 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -199,5 +199,6 @@ static inline void serio_continue_rx(struct serio *serio) #define SERIO_DYNAPRO 0x3a #define SERIO_HAMPSHIRE 0x3b #define SERIO_PS2MULT 0x3c +#define SERIO_TSC40 0x3d #endif diff --git a/include/linux/sh_eth.h b/include/linux/sh_eth.h new file mode 100644 index 000000000000..2076acf8294d --- /dev/null +++ b/include/linux/sh_eth.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_ETH_H__ +#define __ASM_SH_ETH_H__ + +#include <linux/phy.h> + +enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN}; +enum { + SH_ETH_REG_GIGABIT, + SH_ETH_REG_FAST_SH4, + SH_ETH_REG_FAST_SH3_SH2 +}; + +struct sh_eth_plat_data { + int phy; + int edmac_endian; + int register_type; + phy_interface_t phy_interface; + void (*set_mdio_gate)(void *addr); + + unsigned char mac_addr[6]; + unsigned no_ether_link:1; + unsigned ether_link_active_low:1; +}; + +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 8bd383caa363..6a6b352326d7 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -29,6 +29,7 @@ #include <linux/rcupdate.h> #include <linux/dmaengine.h> #include <linux/hrtimer.h> +#include <linux/dma-mapping.h> /* Don't change this without changing skb_csum_unnecessary! */ #define CHECKSUM_NONE 0 @@ -45,6 +46,11 @@ #define SKB_MAX_HEAD(X) (SKB_MAX_ORDER((X), 0)) #define SKB_MAX_ALLOC (SKB_MAX_ORDER(0, 2)) +/* return minimum truesize of one skb containing X bytes of data */ +#define SKB_TRUESIZE(X) ((X) + \ + SKB_DATA_ALIGN(sizeof(struct sk_buff)) + \ + SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) + /* A. Checksumming of received packets by device. * * NONE: device failed to checksum this packet. @@ -134,7 +140,9 @@ struct sk_buff; typedef struct skb_frag_struct skb_frag_t; struct skb_frag_struct { - struct page *page; + struct { + struct page *p; + } page; #if (BITS_PER_LONG > 32) || (PAGE_SIZE >= 65536) __u32 page_offset; __u32 size; @@ -144,6 +152,26 @@ struct skb_frag_struct { #endif }; +static inline unsigned int skb_frag_size(const skb_frag_t *frag) +{ + return frag->size; +} + +static inline void skb_frag_size_set(skb_frag_t *frag, unsigned int size) +{ + frag->size = size; +} + +static inline void skb_frag_size_add(skb_frag_t *frag, int delta) +{ + frag->size += delta; +} + +static inline void skb_frag_size_sub(skb_frag_t *frag, int delta) +{ + frag->size -= delta; +} + #define HAVE_HW_TIME_STAMP /** @@ -322,6 +350,8 @@ typedef unsigned char *sk_buff_data_t; * @queue_mapping: Queue mapping for multiqueue devices * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed + * @l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport + * ports. * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -414,6 +444,7 @@ struct sk_buff { __u8 ndisc_nodetype:2; #endif __u8 ooo_okay:1; + __u8 l4_rxhash:1; kmemcheck_bitfield_end(flags2); /* 0/13 bit hole */ @@ -521,6 +552,7 @@ static inline struct sk_buff *alloc_skb_fclone(unsigned int size, return __alloc_skb(size, priority, 1, NUMA_NO_NODE); } +extern void skb_recycle(struct sk_buff *skb); extern bool skb_recycle_check(struct sk_buff *skb, int skb_size); extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src); @@ -573,11 +605,11 @@ extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, unsigned int to, struct ts_config *config, struct ts_state *state); -extern __u32 __skb_get_rxhash(struct sk_buff *skb); +extern void __skb_get_rxhash(struct sk_buff *skb); static inline __u32 skb_get_rxhash(struct sk_buff *skb) { if (!skb->rxhash) - skb->rxhash = __skb_get_rxhash(skb); + __skb_get_rxhash(skb); return skb->rxhash; } @@ -823,9 +855,9 @@ static inline struct sk_buff *skb_unshare(struct sk_buff *skb, * The reference count is not incremented and the reference is therefore * volatile. Use with caution. */ -static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) +static inline struct sk_buff *skb_peek(const struct sk_buff_head *list_) { - struct sk_buff *list = ((struct sk_buff *)list_)->next; + struct sk_buff *list = ((const struct sk_buff *)list_)->next; if (list == (struct sk_buff *)list_) list = NULL; return list; @@ -844,9 +876,9 @@ static inline struct sk_buff *skb_peek(struct sk_buff_head *list_) * The reference count is not incremented and the reference is therefore * volatile. Use with caution. */ -static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_) +static inline struct sk_buff *skb_peek_tail(const struct sk_buff_head *list_) { - struct sk_buff *list = ((struct sk_buff *)list_)->prev; + struct sk_buff *list = ((const struct sk_buff *)list_)->prev; if (list == (struct sk_buff *)list_) list = NULL; return list; @@ -1123,18 +1155,51 @@ static inline int skb_pagelen(const struct sk_buff *skb) int i, len = 0; for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) - len += skb_shinfo(skb)->frags[i].size; + len += skb_frag_size(&skb_shinfo(skb)->frags[i]); return len + skb_headlen(skb); } -static inline void skb_fill_page_desc(struct sk_buff *skb, int i, - struct page *page, int off, int size) +/** + * __skb_fill_page_desc - initialise a paged fragment in an skb + * @skb: buffer containing fragment to be initialised + * @i: paged fragment index to initialise + * @page: the page to use for this fragment + * @off: the offset to the data with @page + * @size: the length of the data + * + * Initialises the @i'th fragment of @skb to point to &size bytes at + * offset @off within @page. + * + * Does not take any additional reference on the fragment. + */ +static inline void __skb_fill_page_desc(struct sk_buff *skb, int i, + struct page *page, int off, int size) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - frag->page = page; + frag->page.p = page; frag->page_offset = off; - frag->size = size; + skb_frag_size_set(frag, size); +} + +/** + * skb_fill_page_desc - initialise a paged fragment in an skb + * @skb: buffer containing fragment to be initialised + * @i: paged fragment index to initialise + * @page: the page to use for this fragment + * @off: the offset to the data with @page + * @size: the length of the data + * + * As per __skb_fill_page_desc() -- initialises the @i'th fragment of + * @skb to point to &size bytes at offset @off within @page. In + * addition updates @skb such that @i is the last fragment. + * + * Does not take any additional reference on the fragment. + */ +static inline void skb_fill_page_desc(struct sk_buff *skb, int i, + struct page *page, int off, int size) +{ + __skb_fill_page_desc(skb, i, page, off, size); skb_shinfo(skb)->nr_frags = i + 1; } @@ -1629,6 +1694,137 @@ static inline void netdev_free_page(struct net_device *dev, struct page *page) } /** + * skb_frag_page - retrieve the page refered to by a paged fragment + * @frag: the paged fragment + * + * Returns the &struct page associated with @frag. + */ +static inline struct page *skb_frag_page(const skb_frag_t *frag) +{ + return frag->page.p; +} + +/** + * __skb_frag_ref - take an addition reference on a paged fragment. + * @frag: the paged fragment + * + * Takes an additional reference on the paged fragment @frag. + */ +static inline void __skb_frag_ref(skb_frag_t *frag) +{ + get_page(skb_frag_page(frag)); +} + +/** + * skb_frag_ref - take an addition reference on a paged fragment of an skb. + * @skb: the buffer + * @f: the fragment offset. + * + * Takes an additional reference on the @f'th paged fragment of @skb. + */ +static inline void skb_frag_ref(struct sk_buff *skb, int f) +{ + __skb_frag_ref(&skb_shinfo(skb)->frags[f]); +} + +/** + * __skb_frag_unref - release a reference on a paged fragment. + * @frag: the paged fragment + * + * Releases a reference on the paged fragment @frag. + */ +static inline void __skb_frag_unref(skb_frag_t *frag) +{ + put_page(skb_frag_page(frag)); +} + +/** + * skb_frag_unref - release a reference on a paged fragment of an skb. + * @skb: the buffer + * @f: the fragment offset + * + * Releases a reference on the @f'th paged fragment of @skb. + */ +static inline void skb_frag_unref(struct sk_buff *skb, int f) +{ + __skb_frag_unref(&skb_shinfo(skb)->frags[f]); +} + +/** + * skb_frag_address - gets the address of the data contained in a paged fragment + * @frag: the paged fragment buffer + * + * Returns the address of the data within @frag. The page must already + * be mapped. + */ +static inline void *skb_frag_address(const skb_frag_t *frag) +{ + return page_address(skb_frag_page(frag)) + frag->page_offset; +} + +/** + * skb_frag_address_safe - gets the address of the data contained in a paged fragment + * @frag: the paged fragment buffer + * + * Returns the address of the data within @frag. Checks that the page + * is mapped and returns %NULL otherwise. + */ +static inline void *skb_frag_address_safe(const skb_frag_t *frag) +{ + void *ptr = page_address(skb_frag_page(frag)); + if (unlikely(!ptr)) + return NULL; + + return ptr + frag->page_offset; +} + +/** + * __skb_frag_set_page - sets the page contained in a paged fragment + * @frag: the paged fragment + * @page: the page to set + * + * Sets the fragment @frag to contain @page. + */ +static inline void __skb_frag_set_page(skb_frag_t *frag, struct page *page) +{ + frag->page.p = page; +} + +/** + * skb_frag_set_page - sets the page contained in a paged fragment of an skb + * @skb: the buffer + * @f: the fragment offset + * @page: the page to set + * + * Sets the @f'th fragment of @skb to contain @page. + */ +static inline void skb_frag_set_page(struct sk_buff *skb, int f, + struct page *page) +{ + __skb_frag_set_page(&skb_shinfo(skb)->frags[f], page); +} + +/** + * skb_frag_dma_map - maps a paged fragment via the DMA API + * @device: the device to map the fragment to + * @frag: the paged fragment to map + * @offset: the offset within the fragment (starting at the + * fragment's own offset) + * @size: the number of bytes to map + * @direction: the direction of the mapping (%PCI_DMA_*) + * + * Maps the page associated with @frag to @device. + */ +static inline dma_addr_t skb_frag_dma_map(struct device *dev, + const skb_frag_t *frag, + size_t offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_page(dev, skb_frag_page(frag), + frag->page_offset + offset, size, dir); +} + +/** * skb_clone_writable - is the header of a clone writable * @skb: buffer to check * @len: length up to which to write @@ -1636,7 +1832,7 @@ static inline void netdev_free_page(struct net_device *dev, struct page *page) * Returns true if modifying the header part of the cloned buffer * does not requires the data to be copied. */ -static inline int skb_clone_writable(struct sk_buff *skb, unsigned int len) +static inline int skb_clone_writable(const struct sk_buff *skb, unsigned int len) { return !skb_header_cloned(skb) && skb_headroom(skb) + len <= skb->hdr_len; @@ -1730,13 +1926,13 @@ static inline int skb_add_data(struct sk_buff *skb, } static inline int skb_can_coalesce(struct sk_buff *skb, int i, - struct page *page, int off) + const struct page *page, int off) { if (i) { - struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; + const struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1]; - return page == frag->page && - off == frag->page_offset + frag->size; + return page == skb_frag_page(frag) && + off == frag->page_offset + skb_frag_size(frag); } return 0; } @@ -2020,8 +2216,13 @@ static inline bool skb_defer_rx_timestamp(struct sk_buff *skb) /** * skb_complete_tx_timestamp() - deliver cloned skb with tx timestamps * + * PHY drivers may accept clones of transmitted packets for + * timestamping via their phy_driver.txtstamp method. These drivers + * must call this function to return the skb back to the stack, with + * or without a timestamp. + * * @skb: clone of the the original outgoing packet - * @hwtstamps: hardware time stamps + * @hwtstamps: hardware time stamps, may be NULL if not available * */ void skb_complete_tx_timestamp(struct sk_buff *skb, @@ -2257,7 +2458,8 @@ static inline bool skb_warn_if_lro(const struct sk_buff *skb) { /* LRO sets gso_size but not gso_type, whereas if GSO is really * wanted then gso_type will be set. */ - struct skb_shared_info *shinfo = skb_shinfo(skb); + const struct skb_shared_info *shinfo = skb_shinfo(skb); + if (skb_is_nonlinear(skb) && shinfo->gso_size != 0 && unlikely(shinfo->gso_type == 0)) { __skb_warn_lro_forwarding(skb); @@ -2281,7 +2483,7 @@ static inline void skb_forward_csum(struct sk_buff *skb) * Instead of forcing ip_summed to CHECKSUM_NONE, we can * use this helper, to document places where we make this assertion. */ -static inline void skb_checksum_none_assert(struct sk_buff *skb) +static inline void skb_checksum_none_assert(const struct sk_buff *skb) { #ifdef DEBUG BUG_ON(skb->ip_summed != CHECKSUM_NONE); @@ -2290,5 +2492,25 @@ static inline void skb_checksum_none_assert(struct sk_buff *skb) bool skb_partial_csum_set(struct sk_buff *skb, u16 start, u16 off); +static inline bool skb_is_recycleable(const struct sk_buff *skb, int skb_size) +{ + if (irqs_disabled()) + return false; + + if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) + return false; + + if (skb_is_nonlinear(skb) || skb->fclone != SKB_FCLONE_UNAVAILABLE) + return false; + + skb_size = SKB_DATA_ALIGN(skb_size + NET_SKB_PAD); + if (skb_end_pointer(skb) - skb->head < skb_size) + return false; + + if (skb_shared(skb) || skb_cloned(skb)) + return false; + + return true; +} #endif /* __KERNEL__ */ #endif /* _LINUX_SKBUFF_H */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index f58d6413d230..a32bcfdc7834 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -36,12 +36,15 @@ enum stat_item { ORDER_FALLBACK, /* Number of times fallback was necessary */ CMPXCHG_DOUBLE_CPU_FAIL,/* Failure of this_cpu_cmpxchg_double */ CMPXCHG_DOUBLE_FAIL, /* Number of times that cmpxchg double did not match */ + CPU_PARTIAL_ALLOC, /* Used cpu partial on alloc */ + CPU_PARTIAL_FREE, /* USed cpu partial on free */ NR_SLUB_STAT_ITEMS }; struct kmem_cache_cpu { void **freelist; /* Pointer to next available object */ unsigned long tid; /* Globally unique transaction id */ struct page *page; /* The slab from which we are allocating */ + struct page *partial; /* Partially allocated frozen slabs */ int node; /* The node of the page (or -1 for debug) */ #ifdef CONFIG_SLUB_STATS unsigned stat[NR_SLUB_STAT_ITEMS]; @@ -79,6 +82,7 @@ struct kmem_cache { int size; /* The size of an object including meta data */ int objsize; /* The size of an object without meta data */ int offset; /* Free pointer offset. */ + int cpu_partial; /* Number of per cpu partial objects to keep around */ struct kmem_cache_order_objects oo; /* Allocation and freeing of slabs */ diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 8623217f84d0..f10ed7b4a714 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -25,7 +25,7 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ + u16 board_rev; /* Board revision number from SPROM. */ u8 country_code; /* Country Code */ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index efbf459d571c..98941203a27f 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -462,6 +462,46 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ + +/* Values for boardflags_hi read from SPROM */ +#define SSB_BFH_NOPA 0x0001 /* has no PA */ +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ + +/* Values for boardflags2_lo read from SPROM */ +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, diff --git a/include/linux/sungem_phy.h b/include/linux/sungem_phy.h new file mode 100644 index 000000000000..bd9be9f59d3a --- /dev/null +++ b/include/linux/sungem_phy.h @@ -0,0 +1,132 @@ +#ifndef __SUNGEM_PHY_H__ +#define __SUNGEM_PHY_H__ + +struct mii_phy; + +/* Operations supported by any kind of PHY */ +struct mii_phy_ops +{ + int (*init)(struct mii_phy *phy); + int (*suspend)(struct mii_phy *phy); + int (*setup_aneg)(struct mii_phy *phy, u32 advertise); + int (*setup_forced)(struct mii_phy *phy, int speed, int fd); + int (*poll_link)(struct mii_phy *phy); + int (*read_link)(struct mii_phy *phy); + int (*enable_fiber)(struct mii_phy *phy, int autoneg); +}; + +/* Structure used to statically define an mii/gii based PHY */ +struct mii_phy_def +{ + u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ + u32 phy_id_mask; /* Significant bits */ + u32 features; /* Ethtool SUPPORTED_* defines */ + int magic_aneg; /* Autoneg does all speed test for us */ + const char* name; + const struct mii_phy_ops* ops; +}; + +enum { + BCM54XX_COPPER, + BCM54XX_FIBER, + BCM54XX_GBIC, + BCM54XX_SGMII, + BCM54XX_UNKNOWN, +}; + +/* An instance of a PHY, partially borrowed from mii_if_info */ +struct mii_phy +{ + struct mii_phy_def* def; + u32 advertising; + int mii_id; + + /* 1: autoneg enabled, 0: disabled */ + int autoneg; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* Provided by host chip */ + struct net_device *dev; + int (*mdio_read) (struct net_device *dev, int mii_id, int reg); + void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val); + void *platform_data; +}; + +/* Pass in a struct mii_phy with dev, mdio_read and mdio_write + * filled, the remaining fields will be filled on return + */ +extern int sungem_phy_probe(struct mii_phy *phy, int mii_id); + + +/* MII definitions missing from mii.h */ + +#define BMCR_SPD2 0x0040 /* Gigabit enable (bcm54xx) */ +#define LPA_PAUSE 0x0400 + +/* More PHY registers (model specific) */ + +/* MII BCM5201 MULTIPHY interrupt register */ +#define MII_BCM5201_INTERRUPT 0x1A +#define MII_BCM5201_INTERRUPT_INTENABLE 0x4000 + +#define MII_BCM5201_AUXMODE2 0x1B +#define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008 + +#define MII_BCM5201_MULTIPHY 0x1E + +/* MII BCM5201 MULTIPHY register bits */ +#define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002 +#define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008 + +/* MII BCM5221 Additional registers */ +#define MII_BCM5221_TEST 0x1f +#define MII_BCM5221_TEST_ENABLE_SHADOWS 0x0080 +#define MII_BCM5221_SHDOW_AUX_STAT2 0x1b +#define MII_BCM5221_SHDOW_AUX_STAT2_APD 0x0020 +#define MII_BCM5221_SHDOW_AUX_MODE4 0x1a +#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE 0x0001 +#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR 0x0004 + +/* MII BCM5241 Additional registers */ +#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR 0x0008 + +/* MII BCM5400 1000-BASET Control register */ +#define MII_BCM5400_GB_CONTROL 0x09 +#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200 + +/* MII BCM5400 AUXCONTROL register */ +#define MII_BCM5400_AUXCONTROL 0x18 +#define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004 + +/* MII BCM5400 AUXSTATUS register */ +#define MII_BCM5400_AUXSTATUS 0x19 +#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Marvell 88E1011 PHY control */ +#define MII_M1011_PHY_SPEC_CONTROL 0x10 +#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX 0x20 +#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX 0x40 + +/* Marvell 88E1011 PHY status */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE 0x0008 +#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE 0x0004 + +#endif /* __SUNGEM_PHY_H__ */ diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index db7bcaf7c5bd..492486a74484 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -9,6 +9,7 @@ #ifndef _LINUX_SUNRPC_CLNT_H #define _LINUX_SUNRPC_CLNT_H +#include <linux/types.h> #include <linux/socket.h> #include <linux/in.h> #include <linux/in6.h> @@ -161,7 +162,7 @@ const char *rpc_peeraddr2str(struct rpc_clnt *, enum rpc_display_format_t); size_t rpc_ntop(const struct sockaddr *, char *, const size_t); size_t rpc_pton(const char *, const size_t, struct sockaddr *, const size_t); -char * rpc_sockaddr2uaddr(const struct sockaddr *); +char * rpc_sockaddr2uaddr(const struct sockaddr *, gfp_t); size_t rpc_uaddr2sockaddr(const char *, const size_t, struct sockaddr *, const size_t); @@ -218,7 +219,13 @@ static inline bool __rpc_cmp_addr6(const struct sockaddr *sap1, { const struct sockaddr_in6 *sin1 = (const struct sockaddr_in6 *)sap1; const struct sockaddr_in6 *sin2 = (const struct sockaddr_in6 *)sap2; - return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr); + + if (!ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr)) + return false; + else if (ipv6_addr_type(&sin1->sin6_addr) & IPV6_ADDR_LINKLOCAL) + return sin1->sin6_scope_id == sin2->sin6_scope_id; + + return true; } static inline bool __rpc_copy_addr6(struct sockaddr *dst, diff --git a/include/linux/sunrpc/rpc_pipe_fs.h b/include/linux/sunrpc/rpc_pipe_fs.h index cf14db975da0..e4ea43058d8f 100644 --- a/include/linux/sunrpc/rpc_pipe_fs.h +++ b/include/linux/sunrpc/rpc_pipe_fs.h @@ -44,6 +44,8 @@ RPC_I(struct inode *inode) return container_of(inode, struct rpc_inode, vfs_inode); } +extern ssize_t rpc_pipe_generic_upcall(struct file *, struct rpc_pipe_msg *, + char __user *, size_t); extern int rpc_queue_upcall(struct inode *, struct rpc_pipe_msg *); struct rpc_clnt; diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 223588a976a0..d8d5d93071b3 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -212,11 +212,6 @@ static inline void svc_putu32(struct kvec *iov, __be32 val) iov->iov_len += sizeof(__be32); } -union svc_addr_u { - struct in_addr addr; - struct in6_addr addr6; -}; - /* * The context of a single thread, including the request currently being * processed. @@ -225,8 +220,12 @@ struct svc_rqst { struct list_head rq_list; /* idle list */ struct list_head rq_all; /* all threads list */ struct svc_xprt * rq_xprt; /* transport ptr */ + struct sockaddr_storage rq_addr; /* peer address */ size_t rq_addrlen; + struct sockaddr_storage rq_daddr; /* dest addr of request + * - reply from here */ + size_t rq_daddrlen; struct svc_serv * rq_server; /* RPC service definition */ struct svc_pool * rq_pool; /* thread pool */ @@ -255,9 +254,6 @@ struct svc_rqst { unsigned short rq_secure : 1; /* secure port */ - union svc_addr_u rq_daddr; /* dest addr of request - * - reply from here */ - void * rq_argp; /* decoded arguments */ void * rq_resp; /* xdr'd results */ void * rq_auth_data; /* flavor-specific data */ @@ -300,6 +296,21 @@ static inline struct sockaddr *svc_addr(const struct svc_rqst *rqst) return (struct sockaddr *) &rqst->rq_addr; } +static inline struct sockaddr_in *svc_daddr_in(const struct svc_rqst *rqst) +{ + return (struct sockaddr_in *) &rqst->rq_daddr; +} + +static inline struct sockaddr_in6 *svc_daddr_in6(const struct svc_rqst *rqst) +{ + return (struct sockaddr_in6 *) &rqst->rq_daddr; +} + +static inline struct sockaddr *svc_daddr(const struct svc_rqst *rqst) +{ + return (struct sockaddr *) &rqst->rq_daddr; +} + /* * Check buffer bounds after decoding arguments */ @@ -340,7 +351,8 @@ struct svc_deferred_req { struct svc_xprt *xprt; struct sockaddr_storage addr; /* where reply must go */ size_t addrlen; - union svc_addr_u daddr; /* where reply must come from */ + struct sockaddr_storage daddr; /* where reply must come from */ + size_t daddrlen; struct cache_deferred_req handle; size_t xprt_hlen; int argslen; @@ -404,7 +416,7 @@ struct svc_procedure { struct svc_serv *svc_create(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv *)); struct svc_rqst *svc_prepare_thread(struct svc_serv *serv, - struct svc_pool *pool); + struct svc_pool *pool, int node); void svc_exit_thread(struct svc_rqst *); struct svc_serv * svc_create_pooled(struct svc_program *, unsigned int, void (*shutdown)(struct svc_serv *), diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 6bbcef22e105..57a692432f8a 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -8,15 +8,18 @@ #include <linux/mm.h> #include <asm/errno.h> -#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_VT) && defined(CONFIG_VT_CONSOLE) +#ifdef CONFIG_VT extern void pm_set_vt_switch(int); -extern int pm_prepare_console(void); -extern void pm_restore_console(void); #else static inline void pm_set_vt_switch(int do_switch) { } +#endif +#ifdef CONFIG_VT_CONSOLE_SLEEP +extern int pm_prepare_console(void); +extern void pm_restore_console(void); +#else static inline int pm_prepare_console(void) { return 0; @@ -34,6 +37,58 @@ typedef int __bitwise suspend_state_t; #define PM_SUSPEND_MEM ((__force suspend_state_t) 3) #define PM_SUSPEND_MAX ((__force suspend_state_t) 4) +enum suspend_stat_step { + SUSPEND_FREEZE = 1, + SUSPEND_PREPARE, + SUSPEND_SUSPEND, + SUSPEND_SUSPEND_NOIRQ, + SUSPEND_RESUME_NOIRQ, + SUSPEND_RESUME +}; + +struct suspend_stats { + int success; + int fail; + int failed_freeze; + int failed_prepare; + int failed_suspend; + int failed_suspend_noirq; + int failed_resume; + int failed_resume_noirq; +#define REC_FAILED_NUM 2 + int last_failed_dev; + char failed_devs[REC_FAILED_NUM][40]; + int last_failed_errno; + int errno[REC_FAILED_NUM]; + int last_failed_step; + enum suspend_stat_step failed_steps[REC_FAILED_NUM]; +}; + +extern struct suspend_stats suspend_stats; + +static inline void dpm_save_failed_dev(const char *name) +{ + strlcpy(suspend_stats.failed_devs[suspend_stats.last_failed_dev], + name, + sizeof(suspend_stats.failed_devs[0])); + suspend_stats.last_failed_dev++; + suspend_stats.last_failed_dev %= REC_FAILED_NUM; +} + +static inline void dpm_save_failed_errno(int err) +{ + suspend_stats.errno[suspend_stats.last_failed_errno] = err; + suspend_stats.last_failed_errno++; + suspend_stats.last_failed_errno %= REC_FAILED_NUM; +} + +static inline void dpm_save_failed_step(enum suspend_stat_step step) +{ + suspend_stats.failed_steps[suspend_stats.last_failed_step] = step; + suspend_stats.last_failed_step++; + suspend_stats.last_failed_step %= REC_FAILED_NUM; +} + /** * struct platform_suspend_ops - Callbacks for managing platform dependent * system sleep states. @@ -334,4 +389,38 @@ static inline void unlock_system_sleep(void) } #endif +#ifdef CONFIG_ARCH_SAVE_PAGE_KEYS +/* + * The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture + * to save/restore additional information to/from the array of page + * frame numbers in the hibernation image. For s390 this is used to + * save and restore the storage key for each page that is included + * in the hibernation image. + */ +unsigned long page_key_additional_pages(unsigned long pages); +int page_key_alloc(unsigned long pages); +void page_key_free(void); +void page_key_read(unsigned long *pfn); +void page_key_memorize(unsigned long *pfn); +void page_key_write(void *address); + +#else /* !CONFIG_ARCH_SAVE_PAGE_KEYS */ + +static inline unsigned long page_key_additional_pages(unsigned long pages) +{ + return 0; +} + +static inline int page_key_alloc(unsigned long pages) +{ + return 0; +} + +static inline void page_key_free(void) {} +static inline void page_key_read(unsigned long *pfn) {} +static inline void page_key_memorize(unsigned long *pfn) {} +static inline void page_key_write(void *address) {} + +#endif /* !CONFIG_ARCH_SAVE_PAGE_KEYS */ + #endif /* _LINUX_SUSPEND_H */ diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 11684d9e6bd2..9a1ec10fd504 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -435,7 +435,7 @@ enum { NET_IPV4_ROUTE_MAX_SIZE=5, NET_IPV4_ROUTE_GC_MIN_INTERVAL=6, NET_IPV4_ROUTE_GC_TIMEOUT=7, - NET_IPV4_ROUTE_GC_INTERVAL=8, + NET_IPV4_ROUTE_GC_INTERVAL=8, /* obsolete since 2.6.38 */ NET_IPV4_ROUTE_REDIRECT_LOAD=9, NET_IPV4_ROUTE_REDIRECT_NUMBER=10, NET_IPV4_ROUTE_REDIRECT_SILENCE=11, diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index d7d2f2158142..dac0859e6440 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -112,6 +112,7 @@ struct bin_attribute { struct sysfs_ops { ssize_t (*show)(struct kobject *, struct attribute *,char *); ssize_t (*store)(struct kobject *,struct attribute *,const char *, size_t); + const void *(*namespace)(struct kobject *, const struct attribute *); }; struct sysfs_dirent; diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 531ede8006d9..7f59ee946983 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -111,7 +111,8 @@ enum { #define TCPI_OPT_TIMESTAMPS 1 #define TCPI_OPT_SACK 2 #define TCPI_OPT_WSCALE 4 -#define TCPI_OPT_ECN 8 +#define TCPI_OPT_ECN 8 /* ECN was negociated at TCP session init */ +#define TCPI_OPT_ECN_SEEN 16 /* we received at least one packet with ECT */ enum tcp_ca_state { TCP_CA_Open = 0, @@ -379,6 +380,10 @@ struct tcp_sock { u32 snd_cwnd_clamp; /* Do not allow snd_cwnd to grow above this */ u32 snd_cwnd_used; u32 snd_cwnd_stamp; + u32 prior_cwnd; /* Congestion window at start of Recovery. */ + u32 prr_delivered; /* Number of newly delivered packets to + * receiver in Recovery. */ + u32 prr_out; /* Total number of pkts sent during Recovery. */ u32 rcv_wnd; /* Current receiver window */ u32 write_seq; /* Tail(+1) of data held in tcp send buffer */ diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index 0db239590b4d..9730b0e51e46 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -41,6 +41,10 @@ #include <linux/string.h> #include <asm/byteorder.h> +#ifndef __KERNEL__ +#include <arpa/inet.h> /* for ntohs etc. */ +#endif + /* * Configuration * diff --git a/include/linux/trace_clock.h b/include/linux/trace_clock.h index 7a8130384087..4eb490237d4c 100644 --- a/include/linux/trace_clock.h +++ b/include/linux/trace_clock.h @@ -15,5 +15,6 @@ extern u64 notrace trace_clock_local(void); extern u64 notrace trace_clock(void); extern u64 notrace trace_clock_global(void); +extern u64 notrace trace_clock_counter(void); #endif /* _LINUX_TRACE_CLOCK_H */ diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h index d530a4460a0b..df0a779c1bbd 100644 --- a/include/linux/tracepoint.h +++ b/include/linux/tracepoint.h @@ -54,8 +54,18 @@ extern int tracepoint_probe_unregister_noupdate(const char *name, void *probe, void *data); extern void tracepoint_probe_update_all(void); +#ifdef CONFIG_MODULES +struct tp_module { + struct list_head list; + unsigned int num_tracepoints; + struct tracepoint * const *tracepoints_ptrs; +}; +#endif /* CONFIG_MODULES */ + struct tracepoint_iter { - struct module *module; +#ifdef CONFIG_MODULES + struct tp_module *module; +#endif /* CONFIG_MODULES */ struct tracepoint * const *tracepoint; }; @@ -63,8 +73,6 @@ extern void tracepoint_iter_start(struct tracepoint_iter *iter); extern void tracepoint_iter_next(struct tracepoint_iter *iter); extern void tracepoint_iter_stop(struct tracepoint_iter *iter); extern void tracepoint_iter_reset(struct tracepoint_iter *iter); -extern int tracepoint_get_iter_range(struct tracepoint * const **tracepoint, - struct tracepoint * const *begin, struct tracepoint * const *end); /* * tracepoint_synchronize_unregister must be called between the last tracepoint @@ -78,17 +86,6 @@ static inline void tracepoint_synchronize_unregister(void) #define PARAMS(args...) args -#ifdef CONFIG_TRACEPOINTS -extern -void tracepoint_update_probe_range(struct tracepoint * const *begin, - struct tracepoint * const *end); -#else -static inline -void tracepoint_update_probe_range(struct tracepoint * const *begin, - struct tracepoint * const *end) -{ } -#endif /* CONFIG_TRACEPOINTS */ - #endif /* _LINUX_TRACEPOINT_H */ /* diff --git a/include/linux/tty.h b/include/linux/tty.h index 5f2ede82b3d6..5dbb3cb05a82 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -473,7 +473,9 @@ extern void proc_clear_tty(struct task_struct *p); extern struct tty_struct *get_current_tty(void); extern void tty_default_fops(struct file_operations *fops); extern struct tty_struct *alloc_tty_struct(void); -extern int tty_add_file(struct tty_struct *tty, struct file *file); +extern int tty_alloc_file(struct file *file); +extern void tty_add_file(struct tty_struct *tty, struct file *file); +extern void tty_free_file(struct file *file); extern void free_tty_struct(struct tty_struct *tty); extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); @@ -581,6 +583,8 @@ extern int __init tty_init(void); /* tty_ioctl.c */ extern int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +extern long n_tty_compat_ioctl_helper(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); /* serial.c */ @@ -602,8 +606,24 @@ extern long vt_compat_ioctl(struct tty_struct *tty, /* functions for preparation of BKL removal */ extern void __lockfunc tty_lock(void) __acquires(tty_lock); extern void __lockfunc tty_unlock(void) __releases(tty_lock); -extern struct task_struct *__big_tty_mutex_owner; -#define tty_locked() (current == __big_tty_mutex_owner) + +/* + * this shall be called only from where BTM is held (like close) + * + * We need this to ensure nobody waits for us to finish while we are waiting. + * Without this we were encountering system stalls. + * + * This should be indeed removed with BTM removal later. + * + * Locking: BTM required. Nobody is allowed to hold port->mutex. + */ +static inline void tty_wait_until_sent_from_close(struct tty_struct *tty, + long timeout) +{ + tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */ + tty_wait_until_sent(tty, timeout); + tty_lock(); +} /* * wait_event_interruptible_tty -- wait for a condition with the tty lock held diff --git a/include/linux/types.h b/include/linux/types.h index 176da8c1fbb1..57a97234bec1 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -238,6 +238,16 @@ struct ustat { char f_fpack[6]; }; +/** + * struct rcu_head - callback structure for use with RCU + * @next: next update requests in a list + * @func: actual update function to call after the grace period. + */ +struct rcu_head { + struct rcu_head *next; + void (*func)(struct rcu_head *head); +}; + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ #endif /* _LINUX_TYPES_H */ diff --git a/include/linux/uinput.h b/include/linux/uinput.h index d28c726ede4f..2aa2881b0df9 100644 --- a/include/linux/uinput.h +++ b/include/linux/uinput.h @@ -68,7 +68,7 @@ struct uinput_device { unsigned char head; unsigned char tail; struct input_event buff[UINPUT_BUFFER_SIZE]; - int ff_effects_max; + unsigned int ff_effects_max; struct uinput_request *requests[UINPUT_NUM_REQUESTS]; wait_queue_head_t requests_waitq; diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h index 665517c05eaf..fd99ff9298c6 100644 --- a/include/linux/uio_driver.h +++ b/include/linux/uio_driver.h @@ -23,7 +23,10 @@ struct uio_map; /** * struct uio_mem - description of a UIO memory region * @name: name of the memory region for identification - * @addr: address of the device's memory + * @addr: address of the device's memory (phys_addr is used since + * addr can be logical, virtual, or physical & phys_addr_t + * should always be large enough to handle any of the + * address types) * @size: size of IO * @memtype: type of memory addr points to * @internal_addr: ioremap-ped version of addr, for driver internal use @@ -31,7 +34,7 @@ struct uio_map; */ struct uio_mem { const char *name; - unsigned long addr; + phys_addr_t addr; unsigned long size; int memtype; void __iomem *internal_addr; diff --git a/include/linux/un.h b/include/linux/un.h index 45561c564b8e..3ed3e46c1b1f 100644 --- a/include/linux/un.h +++ b/include/linux/un.h @@ -1,10 +1,12 @@ #ifndef _LINUX_UN_H #define _LINUX_UN_H +#include <linux/socket.h> + #define UNIX_PATH_MAX 108 struct sockaddr_un { - sa_family_t sun_family; /* AF_UNIX */ + __kernel_sa_family_t sun_family; /* AF_UNIX */ char sun_path[UNIX_PATH_MAX]; /* pathname */ }; diff --git a/include/linux/usb.h b/include/linux/usb.h index 73c7df489607..6f49a1b39fa6 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -292,6 +292,16 @@ struct usb_host_config { int extralen; }; +/* USB2.0 and USB3.0 device BOS descriptor set */ +struct usb_host_bos { + struct usb_bos_descriptor *desc; + + /* wireless cap descriptor is handled by wusb */ + struct usb_ext_cap_descriptor *ext_cap; + struct usb_ss_cap_descriptor *ss_cap; + struct usb_ss_container_id_descriptor *ss_id; +}; + int __usb_get_extra_descriptor(char *buffer, unsigned size, unsigned char type, void **ptr); #define usb_get_extra_descriptor(ifpoint, type, ptr) \ @@ -381,6 +391,7 @@ struct usb_tt; * @ep0: endpoint 0 data (default control pipe) * @dev: generic device interface * @descriptor: USB device descriptor + * @bos: USB device BOS descriptor set * @config: all of the device's configs * @actconfig: the active configuration * @ep_in: array of IN endpoints @@ -399,6 +410,9 @@ struct usb_tt; * FIXME -- complete doc * @authenticated: Crypto authentication passed * @wusb: device is Wireless USB + * @lpm_capable: device supports LPM + * @usb2_hw_lpm_capable: device can perform USB2 hardware LPM + * @usb2_hw_lpm_enabled: USB2 hardware LPM enabled * @string_langid: language ID for strings * @product: iProduct string, if present (static) * @manufacturer: iManufacturer string, if present (static) @@ -442,6 +456,7 @@ struct usb_device { struct device dev; struct usb_device_descriptor descriptor; + struct usb_host_bos *bos; struct usb_host_config *config; struct usb_host_config *actconfig; @@ -460,6 +475,9 @@ struct usb_device { unsigned authorized:1; unsigned authenticated:1; unsigned wusb:1; + unsigned lpm_capable:1; + unsigned usb2_hw_lpm_capable:1; + unsigned usb2_hw_lpm_enabled:1; int string_langid; /* static strings from the device */ @@ -1574,7 +1592,7 @@ usb_maxpacket(struct usb_device *udev, int pipe, int is_out) return 0; /* NOTE: only 0x07ff bits are for packet size... */ - return le16_to_cpu(ep->desc.wMaxPacketSize); + return usb_endpoint_maxp(&ep->desc); } /* ----------------------------------------------------------------------- */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 0fd3fbdd8283..d5da6c68c250 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -34,6 +34,7 @@ #define __LINUX_USB_CH9_H #include <linux/types.h> /* __u8 etc */ +#include <asm/byteorder.h> /* le16_to_cpu */ /*-------------------------------------------------------------------------*/ @@ -143,6 +144,11 @@ #define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ #define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-7 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ @@ -377,12 +383,6 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 @@ -390,6 +390,17 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + /*-------------------------------------------------------------------------*/ /** @@ -570,6 +581,17 @@ static inline int usb_endpoint_is_isoc_out( return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return le16_to_cpu(epd->wMaxPacketSize); +} + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ @@ -851,6 +873,18 @@ enum usb_device_speed { USB_SPEED_SUPER, /* usb 3.0 */ }; +#ifdef __KERNEL__ + +/** + * usb_speed_string() - Returns human readable-name of the speed. + * @speed: The speed to return human-readable name for. If it's not + * any of the speeds defined in usb_device_speed enum, string for + * USB_SPEED_UNKNOWN will be returned. + */ +extern const char *usb_speed_string(enum usb_device_speed speed); + +#endif + enum usb_device_state { /* NOTATTACHED isn't in the USB spec, and this state acts * the same as ATTACHED ... but it's clearer this way. diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 087f4b931833..1d3a67523ffc 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -437,9 +437,9 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep) struct usb_dcd_config_params { __u8 bU1devExitLat; /* U1 Device exit Latency */ -#define USB_DEFULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ +#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */ __le16 bU2DevExitLat; /* U2 Device exit Latency */ -#define USB_DEFULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ +#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */ }; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 0097136ba45d..03354d557b79 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -178,7 +178,7 @@ struct usb_hcd { * this structure. */ unsigned long hcd_priv[0] - __attribute__ ((aligned(sizeof(unsigned long)))); + __attribute__ ((aligned(sizeof(s64)))); }; /* 2.4 does this a bit differently ... */ @@ -343,6 +343,7 @@ struct hc_driver { * address is set */ int (*update_device)(struct usb_hcd *, struct usb_device *); + int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h index b6b8660d0c68..55805f9dcf21 100644 --- a/include/linux/usb/r8a66597.h +++ b/include/linux/usb/r8a66597.h @@ -48,6 +48,9 @@ struct r8a66597_platdata { /* (external controller only) set one = WR0_N shorted to WR1_N */ unsigned wr0_shorted_to_wr1:1; + + /* set one = using SUDMAC */ + unsigned sudmac:1; }; /* Register definitions */ @@ -417,5 +420,62 @@ struct r8a66597_platdata { #define USBSPD 0x00C0 #define RTPORT 0x0001 +/* SUDMAC registers */ +#define CH0CFG 0x00 +#define CH1CFG 0x04 +#define CH0BA 0x10 +#define CH1BA 0x14 +#define CH0BBC 0x18 +#define CH1BBC 0x1C +#define CH0CA 0x20 +#define CH1CA 0x24 +#define CH0CBC 0x28 +#define CH1CBC 0x2C +#define CH0DEN 0x30 +#define CH1DEN 0x34 +#define DSTSCLR 0x38 +#define DBUFCTRL 0x3C +#define DINTCTRL 0x40 +#define DINTSTS 0x44 +#define DINTSTSCLR 0x48 +#define CH0SHCTRL 0x50 +#define CH1SHCTRL 0x54 + +/* SUDMAC Configuration Registers */ +#define SENDBUFM 0x1000 /* b12: Transmit Buffer Mode */ +#define RCVENDM 0x0100 /* b8: Receive Data Transfer End Mode */ +#define LBA_WAIT 0x0030 /* b5-4: Local Bus Access Wait */ + +/* DMA Enable Registers */ +#define DEN 0x0001 /* b1: DMA Transfer Enable */ + +/* DMA Status Clear Register */ +#define CH1STCLR 0x0002 /* b2: Ch1 DMA Status Clear */ +#define CH0STCLR 0x0001 /* b1: Ch0 DMA Status Clear */ + +/* DMA Buffer Control Register */ +#define CH1BUFW 0x0200 /* b9: Ch1 DMA Buffer Data Transfer Enable */ +#define CH0BUFW 0x0100 /* b8: Ch0 DMA Buffer Data Transfer Enable */ +#define CH1BUFS 0x0002 /* b2: Ch1 DMA Buffer Data Status */ +#define CH0BUFS 0x0001 /* b1: Ch0 DMA Buffer Data Status */ + +/* DMA Interrupt Control Register */ +#define CH1ERRE 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Enable */ +#define CH0ERRE 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Enable */ +#define CH1ENDE 0x0002 /* b2: Ch1 DMA Transfer End Int Enable */ +#define CH0ENDE 0x0001 /* b1: Ch0 DMA Transfer End Int Enable */ + +/* DMA Interrupt Status Register */ +#define CH1ERRS 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Status */ +#define CH0ERRS 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Status */ +#define CH1ENDS 0x0002 /* b2: Ch1 DMA Transfer End Int Status */ +#define CH0ENDS 0x0001 /* b1: Ch0 DMA Transfer End Int Status */ + +/* DMA Interrupt Status Clear Register */ +#define CH1ERRC 0x0200 /* b9: Ch1 SHwy Res Err Detect Int Stat Clear */ +#define CH0ERRC 0x0100 /* b8: Ch0 SHwy Res Err Detect Int Stat Clear */ +#define CH1ENDC 0x0002 /* b2: Ch1 DMA Transfer End Int Stat Clear */ +#define CH0ENDC 0x0001 /* b1: Ch0 DMA Transfer End Int Stat Clear */ + #endif /* __LINUX_USB_R8A66597_H */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h index 8977431259c6..e5a40c318548 100644 --- a/include/linux/usb/renesas_usbhs.h +++ b/include/linux/usb/renesas_usbhs.h @@ -82,6 +82,13 @@ struct renesas_usbhs_platform_callback { * get VBUS status function. */ int (*get_vbus)(struct platform_device *pdev); + + /* + * option: + * + * VBUS control is needed for Host + */ + int (*set_vbus)(struct platform_device *pdev, int enable); }; /* @@ -101,6 +108,8 @@ struct renesas_usbhs_driver_param { * option: * * for BUSWAIT :: BWAIT + * see + * renesas_usbhs/common.c :: usbhsc_set_buswait() * */ int buswait_bwait; @@ -127,6 +136,11 @@ struct renesas_usbhs_driver_param { * pio <--> dma border. */ int pio_dma_border; /* default is 64byte */ + + /* + * option: + */ + u32 has_otg:1; /* for controlling PWEN/EXTLP */ }; /* diff --git a/include/linux/virtio.h b/include/linux/virtio.h index 710885749605..851ebf1a4476 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -61,6 +61,9 @@ struct virtqueue { * virtqueue_detach_unused_buf: detach first unused buffer * vq: the struct virtqueue we're talking about. * Returns NULL or the "data" token handed to add_buf + * virtqueue_get_vring_size: return the size of the virtqueue's vring + * vq: the struct virtqueue containing the vring of interest. + * Returns the size of the vring. * * Locking rules are straightforward: the driver is responsible for * locking. No two operations may be invoked simultaneously, with the exception @@ -97,6 +100,8 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *vq); void *virtqueue_detach_unused_buf(struct virtqueue *vq); +unsigned int virtqueue_get_vring_size(struct virtqueue *vq); + /** * virtio_device - representation of a device using virtio * @index: unique position on the virtio bus diff --git a/include/linux/x25.h b/include/linux/x25.h index 6450a7f12074..810cce6737ea 100644 --- a/include/linux/x25.h +++ b/include/linux/x25.h @@ -12,6 +12,7 @@ #define X25_KERNEL_H #include <linux/types.h> +#include <linux/socket.h> #define SIOCX25GSUBSCRIP (SIOCPROTOPRIVATE + 0) #define SIOCX25SSUBSCRIP (SIOCPROTOPRIVATE + 1) @@ -57,7 +58,7 @@ struct x25_address { * Linux X.25 Address structure, used for bind, and connect mostly. */ struct sockaddr_x25 { - sa_family_t sx25_family; /* Must be AF_X25 */ + __kernel_sa_family_t sx25_family; /* Must be AF_X25 */ struct x25_address sx25_addr; /* X.121 Address */ }; diff --git a/include/linux/xattr.h b/include/linux/xattr.h index aed54c50aa66..e5d122031542 100644 --- a/include/linux/xattr.h +++ b/include/linux/xattr.h @@ -30,6 +30,9 @@ #define XATTR_USER_PREFIX_LEN (sizeof (XATTR_USER_PREFIX) - 1) /* Security namespace */ +#define XATTR_EVM_SUFFIX "evm" +#define XATTR_NAME_EVM XATTR_SECURITY_PREFIX XATTR_EVM_SUFFIX + #define XATTR_SELINUX_SUFFIX "selinux" #define XATTR_NAME_SELINUX XATTR_SECURITY_PREFIX XATTR_SELINUX_SUFFIX @@ -49,6 +52,11 @@ #define XATTR_CAPS_SUFFIX "capability" #define XATTR_NAME_CAPS XATTR_SECURITY_PREFIX XATTR_CAPS_SUFFIX +#define XATTR_POSIX_ACL_ACCESS "posix_acl_access" +#define XATTR_NAME_POSIX_ACL_ACCESS XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_ACCESS +#define XATTR_POSIX_ACL_DEFAULT "posix_acl_default" +#define XATTR_NAME_POSIX_ACL_DEFAULT XATTR_SYSTEM_PREFIX XATTR_POSIX_ACL_DEFAULT + #ifdef __KERNEL__ #include <linux/types.h> @@ -67,6 +75,12 @@ struct xattr_handler { size_t size, int flags, int handler_flags); }; +struct xattr { + char *name; + void *value; + size_t value_len; +}; + ssize_t xattr_getsecurity(struct inode *, const char *, void *, size_t); ssize_t vfs_getxattr(struct dentry *, const char *, void *, size_t); ssize_t vfs_listxattr(struct dentry *d, char *list, size_t size); @@ -78,7 +92,10 @@ ssize_t generic_getxattr(struct dentry *dentry, const char *name, void *buffer, ssize_t generic_listxattr(struct dentry *dentry, char *buffer, size_t buffer_size); int generic_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags); int generic_removexattr(struct dentry *dentry, const char *name); - +ssize_t vfs_getxattr_alloc(struct dentry *dentry, const char *name, + char **xattr_value, size_t size, gfp_t flags); +int vfs_xattr_cmp(struct dentry *dentry, const char *xattr_name, + const char *value, size_t size, gfp_t flags); #endif /* __KERNEL__ */ #endif /* _LINUX_XATTR_H */ |
