diff options
Diffstat (limited to 'include/linux/mtd/fsmc.h')
| -rw-r--r-- | include/linux/mtd/fsmc.h | 181 |
1 files changed, 181 insertions, 0 deletions
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h new file mode 100644 index 000000000000..5d2556700ec2 --- /dev/null +++ b/include/linux/mtd/fsmc.h @@ -0,0 +1,181 @@ +/* + * incude/mtd/fsmc.h + * + * ST Microelectronics + * Flexible Static Memory Controller (FSMC) + * platform data interface and header file + * + * Copyright © 2010 ST Microelectronics + * Vipin Kumar <vipin.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MTD_FSMC_H +#define __MTD_FSMC_H + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/types.h> +#include <linux/mtd/partitions.h> +#include <asm/param.h> + +#define FSMC_NAND_BW8 1 +#define FSMC_NAND_BW16 2 + +/* + * The placement of the Command Latch Enable (CLE) and + * Address Latch Enable (ALE) is twised around in the + * SPEAR310 implementation. + */ +#if defined(CONFIG_MACH_SPEAR310) +#define PLAT_NAND_CLE (1 << 17) +#define PLAT_NAND_ALE (1 << 16) +#else +#define PLAT_NAND_CLE (1 << 16) +#define PLAT_NAND_ALE (1 << 17) +#endif + +#define FSMC_MAX_NOR_BANKS 4 +#define FSMC_MAX_NAND_BANKS 4 + +#define FSMC_FLASH_WIDTH8 1 +#define FSMC_FLASH_WIDTH16 2 + +struct fsmc_nor_bank_regs { + uint32_t ctrl; + uint32_t ctrl_tim; +}; + +/* ctrl register definitions */ +#define BANK_ENABLE (1 << 0) +#define MUXED (1 << 1) +#define NOR_DEV (2 << 2) +#define WIDTH_8 (0 << 4) +#define WIDTH_16 (1 << 4) +#define RSTPWRDWN (1 << 6) +#define WPROT (1 << 7) +#define WRT_ENABLE (1 << 12) +#define WAIT_ENB (1 << 13) + +/* ctrl_tim register definitions */ + +struct fsms_nand_bank_regs { + uint32_t pc; + uint32_t sts; + uint32_t comm; + uint32_t attrib; + uint32_t ioata; + uint32_t ecc1; + uint32_t ecc2; + uint32_t ecc3; +}; + +#define FSMC_NOR_REG_SIZE 0x40 + +struct fsmc_regs { + struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS]; + uint8_t reserved_1[0x40 - 0x20]; + struct fsms_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS]; + uint8_t reserved_2[0xfe0 - 0xc0]; + uint32_t peripid0; /* 0xfe0 */ + uint32_t peripid1; /* 0xfe4 */ + uint32_t peripid2; /* 0xfe8 */ + uint32_t peripid3; /* 0xfec */ + uint32_t pcellid0; /* 0xff0 */ + uint32_t pcellid1; /* 0xff4 */ + uint32_t pcellid2; /* 0xff8 */ + uint32_t pcellid3; /* 0xffc */ +}; + +#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ) + +/* pc register definitions */ +#define FSMC_RESET (1 << 0) +#define FSMC_WAITON (1 << 1) +#define FSMC_ENABLE (1 << 2) +#define FSMC_DEVTYPE_NAND (1 << 3) +#define FSMC_DEVWID_8 (0 << 4) +#define FSMC_DEVWID_16 (1 << 4) +#define FSMC_ECCEN (1 << 6) +#define FSMC_ECCPLEN_512 (0 << 7) +#define FSMC_ECCPLEN_256 (1 << 7) +#define FSMC_TCLR_1 (1 << 9) +#define FSMC_TAR_1 (1 << 13) + +/* sts register definitions */ +#define FSMC_CODE_RDY (1 << 15) + +/* comm register definitions */ +#define FSMC_TSET_0 (0 << 0) +#define FSMC_TWAIT_6 (6 << 8) +#define FSMC_THOLD_4 (4 << 16) +#define FSMC_THIZ_1 (1 << 24) + +/* peripid2 register definitions */ +#define FSMC_REVISION_MSK (0xf) +#define FSMC_REVISION_SHFT (0x4) + +#define FSMC_VER1 1 +#define FSMC_VER2 2 +#define FSMC_VER3 3 +#define FSMC_VER4 4 +#define FSMC_VER5 5 +#define FSMC_VER6 6 +#define FSMC_VER7 7 +#define FSMC_VER8 8 + +static inline uint32_t get_fsmc_version(struct fsmc_regs *regs) +{ + return (readl(®s->peripid2) >> FSMC_REVISION_SHFT) & + FSMC_REVISION_MSK; +} + +/* + * There are 13 bytes of ecc for every 512 byte block in FSMC version 8 + * and it has to be read consecutively and immediately after the 512 + * byte data block for hardware to generate the error bit offsets + * Managing the ecc bytes in the following way is easier. This way is + * similar to oobfree structure maintained already in u-boot nand driver + */ +#define MAX_ECCPLACE_ENTRIES 32 + +struct fsmc_nand_eccplace { + uint8_t offset; + uint8_t length; +}; + +struct fsmc_eccplace { + struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES]; +}; + +/** + * fsmc_nand_platform_data - platform specific NAND controller config + * @partitions: partition table for the platform, use a default fallback + * if this is NULL + * @nr_partitions: the number of partitions in the previous entry + * @options: different options for the driver + * @width: bus width + * @bank: default bank + * @select_bank: callback to select a certain bank, this is + * platform-specific. If the controller only supports one bank + * this may be set to NULL + */ +struct fsmc_nand_platform_data { + struct mtd_partition *partitions; + unsigned int nr_partitions; + unsigned int options; + unsigned int width; + unsigned int bank; + void (*select_bank)(uint32_t bank, uint32_t busw); +}; + +extern int __init fsmc_nor_init(struct platform_device *pdev, + unsigned long base, uint32_t bank, uint32_t width); +extern void __init fsmc_init_board_info(struct platform_device *pdev, + struct mtd_partition *partitions, unsigned int nr_partitions, + unsigned int width); + +#endif /* __MTD_FSMC_H */ |
