diff options
Diffstat (limited to 'include/linux/mmc/mmc.h')
| -rw-r--r-- | include/linux/mmc/mmc.h | 322 |
1 files changed, 230 insertions, 92 deletions
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index cdc54be804f1..e3ed9b95040e 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -1,119 +1,257 @@ /* - * linux/include/linux/mmc/mmc.h + * Header for MultiMediaCard (MMC) * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright 2002 Hewlett-Packard Company + * + * Use consistent with the GNU GPL is permitted, + * provided that this copyright notice is + * preserved in its entirety in all copies and derived works. + * + * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, + * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS + * FITNESS FOR ANY PARTICULAR PURPOSE. + * + * Many thanks to Alessandro Rubini and Jonathan Corbet! + * + * Based strongly on code by: + * + * Author: Yong-iL Joh <tolkien@mizi.com> + * Date : $Date: 2002/06/18 12:37:30 $ + * + * Author: Andrew Christian + * 15 May 2002 */ -#ifndef MMC_H -#define MMC_H - -#include <linux/list.h> -#include <linux/interrupt.h> -#include <linux/device.h> - -struct request; -struct mmc_data; -struct mmc_request; - -struct mmc_command { - u32 opcode; - u32 arg; - u32 resp[4]; - unsigned int flags; /* expected response type */ -#define MMC_RSP_PRESENT (1 << 0) -#define MMC_RSP_136 (1 << 1) /* 136 bit response */ -#define MMC_RSP_CRC (1 << 2) /* expect valid crc */ -#define MMC_RSP_BUSY (1 << 3) /* card may send busy */ -#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */ -#define MMC_CMD_MASK (3 << 5) /* command type */ -#define MMC_CMD_AC (0 << 5) -#define MMC_CMD_ADTC (1 << 5) -#define MMC_CMD_BC (2 << 5) -#define MMC_CMD_BCR (3 << 5) + +#ifndef MMC_MMC_H +#define MMC_MMC_H + +/* Standard MMC commands (4.1) type argument response */ + /* class 1 */ +#define MMC_GO_IDLE_STATE 0 /* bc */ +#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */ +#define MMC_ALL_SEND_CID 2 /* bcr R2 */ +#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */ +#define MMC_SET_DSR 4 /* bc [31:16] RCA */ +#define MMC_SWITCH 6 /* ac [31:0] See below R1b */ +#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */ +#define MMC_SEND_EXT_CSD 8 /* adtc R1 */ +#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */ +#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */ +#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */ +#define MMC_STOP_TRANSMISSION 12 /* ac R1b */ +#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */ +#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */ + + /* class 2 */ +#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */ +#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */ +#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */ + + /* class 3 */ +#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */ + + /* class 4 */ +#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */ +#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */ +#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */ +#define MMC_PROGRAM_CID 26 /* adtc R1 */ +#define MMC_PROGRAM_CSD 27 /* adtc R1 */ + + /* class 6 */ +#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */ +#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */ +#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */ + + /* class 5 */ +#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */ +#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */ +#define MMC_ERASE 38 /* ac R1b */ + + /* class 9 */ +#define MMC_FAST_IO 39 /* ac <Complex> R4 */ +#define MMC_GO_IRQ_STATE 40 /* bcr R5 */ + + /* class 7 */ +#define MMC_LOCK_UNLOCK 42 /* adtc R1b */ + + /* class 8 */ +#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */ +#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */ /* - * These are the response types, and correspond to valid bit - * patterns of the above flags. One additional valid pattern - * is all zeros, which means we don't expect a response. + * MMC_SWITCH argument format: + * + * [31:26] Always 0 + * [25:24] Access Mode + * [23:16] Location of target Byte in EXT_CSD + * [15:08] Value Byte + * [07:03] Always 0 + * [02:00] Command Set */ -#define MMC_RSP_NONE (0) -#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) -#define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) -#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) -#define MMC_RSP_R3 (MMC_RSP_PRESENT) -#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) -#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) - -#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) /* - * These are the command types. + MMC status in R1 + Type + e : error bit + s : status bit + r : detected and set for the actual command response + x : detected and set during command execution. the host must poll + the card by sending status command in order to read these bits. + Clear condition + a : according to the card state + b : always related to the previous command. Reception of + a valid command will clear it (with a delay of one command) + c : clear by read */ -#define mmc_cmd_type(cmd) ((cmd)->flags & MMC_CMD_MASK) - unsigned int retries; /* max number of retries */ - unsigned int error; /* command error */ +#define R1_OUT_OF_RANGE (1 << 31) /* er, c */ +#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */ +#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */ +#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */ +#define R1_ERASE_PARAM (1 << 27) /* ex, c */ +#define R1_WP_VIOLATION (1 << 26) /* erx, c */ +#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */ +#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */ +#define R1_COM_CRC_ERROR (1 << 23) /* er, b */ +#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */ +#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */ +#define R1_CC_ERROR (1 << 20) /* erx, c */ +#define R1_ERROR (1 << 19) /* erx, c */ +#define R1_UNDERRUN (1 << 18) /* ex, c */ +#define R1_OVERRUN (1 << 17) /* ex, c */ +#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */ +#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */ +#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */ +#define R1_ERASE_RESET (1 << 13) /* sr, c */ +#define R1_STATUS(x) (x & 0xFFFFE000) +#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */ +#define R1_READY_FOR_DATA (1 << 8) /* sx, a */ +#define R1_APP_CMD (1 << 5) /* sr, c */ -#define MMC_ERR_NONE 0 -#define MMC_ERR_TIMEOUT 1 -#define MMC_ERR_BADCRC 2 -#define MMC_ERR_FIFO 3 -#define MMC_ERR_FAILED 4 -#define MMC_ERR_INVALID 5 +/* These are unpacked versions of the actual responses */ - struct mmc_data *data; /* data segment associated with cmd */ - struct mmc_request *mrq; /* associated request */ +struct _mmc_csd { + u8 csd_structure; + u8 spec_vers; + u8 taac; + u8 nsac; + u8 tran_speed; + u16 ccc; + u8 read_bl_len; + u8 read_bl_partial; + u8 write_blk_misalign; + u8 read_blk_misalign; + u8 dsr_imp; + u16 c_size; + u8 vdd_r_curr_min; + u8 vdd_r_curr_max; + u8 vdd_w_curr_min; + u8 vdd_w_curr_max; + u8 c_size_mult; + union { + struct { /* MMC system specification version 3.1 */ + u8 erase_grp_size; + u8 erase_grp_mult; + } v31; + struct { /* MMC system specification version 2.2 */ + u8 sector_size; + u8 erase_grp_size; + } v22; + } erase; + u8 wp_grp_size; + u8 wp_grp_enable; + u8 default_ecc; + u8 r2w_factor; + u8 write_bl_len; + u8 write_bl_partial; + u8 file_format_grp; + u8 copy; + u8 perm_write_protect; + u8 tmp_write_protect; + u8 file_format; + u8 ecc; }; -struct mmc_data { - unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */ - unsigned int timeout_clks; /* data timeout (in clocks) */ - unsigned int blksz; /* data block size */ - unsigned int blocks; /* number of blocks */ - unsigned int error; /* data error */ - unsigned int flags; +/* + * OCR bits are mostly in host.h + */ +#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */ -#define MMC_DATA_WRITE (1 << 8) -#define MMC_DATA_READ (1 << 9) -#define MMC_DATA_STREAM (1 << 10) -#define MMC_DATA_MULTI (1 << 11) +/* + * Card Command Classes (CCC) + */ +#define CCC_BASIC (1<<0) /* (0) Basic protocol functions */ + /* (CMD0,1,2,3,4,7,9,10,12,13,15) */ +#define CCC_STREAM_READ (1<<1) /* (1) Stream read commands */ + /* (CMD11) */ +#define CCC_BLOCK_READ (1<<2) /* (2) Block read commands */ + /* (CMD16,17,18) */ +#define CCC_STREAM_WRITE (1<<3) /* (3) Stream write commands */ + /* (CMD20) */ +#define CCC_BLOCK_WRITE (1<<4) /* (4) Block write commands */ + /* (CMD16,24,25,26,27) */ +#define CCC_ERASE (1<<5) /* (5) Ability to erase blocks */ + /* (CMD32,33,34,35,36,37,38,39) */ +#define CCC_WRITE_PROT (1<<6) /* (6) Able to write protect blocks */ + /* (CMD28,29,30) */ +#define CCC_LOCK_CARD (1<<7) /* (7) Able to lock down card */ + /* (CMD16,CMD42) */ +#define CCC_APP_SPEC (1<<8) /* (8) Application specific */ + /* (CMD55,56,57,ACMD*) */ +#define CCC_IO_MODE (1<<9) /* (9) I/O mode */ + /* (CMD5,39,40,52,53) */ +#define CCC_SWITCH (1<<10) /* (10) High speed switch */ + /* (CMD6,34,35,36,37,50) */ + /* (11) Reserved */ + /* (CMD?) */ - unsigned int bytes_xfered; +/* + * CSD field definitions + */ - struct mmc_command *stop; /* stop command */ - struct mmc_request *mrq; /* associated request */ +#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */ +#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */ +#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 - 3.2 - 3.31 - 4.0 - 4.1 */ +#define CSD_STRUCT_EXT_CSD 3 /* Version is coded in CSD_STRUCTURE in EXT_CSD */ - unsigned int sg_len; /* size of scatter list */ - struct scatterlist *sg; /* I/O scatter list */ -}; +#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */ +#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */ +#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */ +#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 - 3.2 - 3.31 */ +#define CSD_SPEC_VER_4 4 /* Implements system specification 4.0 - 4.1 */ -struct mmc_request { - struct mmc_command *cmd; - struct mmc_data *data; - struct mmc_command *stop; +/* + * EXT_CSD fields + */ - void *done_data; /* completion data */ - void (*done)(struct mmc_request *);/* completion function */ -}; +#define EXT_CSD_BUS_WIDTH 183 /* R/W */ +#define EXT_CSD_HS_TIMING 185 /* R/W */ +#define EXT_CSD_CARD_TYPE 196 /* RO */ +#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ + +/* + * EXT_CSD field definitions + */ -struct mmc_host; -struct mmc_card; +#define EXT_CSD_CMD_SET_NORMAL (1<<0) +#define EXT_CSD_CMD_SET_SECURE (1<<1) +#define EXT_CSD_CMD_SET_CPSECURE (1<<2) -extern int mmc_wait_for_req(struct mmc_host *, struct mmc_request *); -extern int mmc_wait_for_cmd(struct mmc_host *, struct mmc_command *, int); -extern int mmc_wait_for_app_cmd(struct mmc_host *, unsigned int, - struct mmc_command *, int); +#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */ +#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */ -extern void mmc_set_data_timeout(struct mmc_data *, const struct mmc_card *, int); +#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ +#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ +#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ -extern int __mmc_claim_host(struct mmc_host *host, struct mmc_card *card); +/* + * MMC_SWITCH access modes + */ -static inline void mmc_claim_host(struct mmc_host *host) -{ - __mmc_claim_host(host, (struct mmc_card *)-1); -} +#define MMC_SWITCH_MODE_CMD_SET 0x00 /* Change the command set */ +#define MMC_SWITCH_MODE_SET_BITS 0x01 /* Set bits which are 1 in value */ +#define MMC_SWITCH_MODE_CLEAR_BITS 0x02 /* Clear bits which are 1 in value */ +#define MMC_SWITCH_MODE_WRITE_BYTE 0x03 /* Set target to value */ -extern void mmc_release_host(struct mmc_host *host); +#endif /* MMC_MMC_PROTOCOL_H */ -#endif |
