diff options
Diffstat (limited to 'include/linux/i2c/twl4030.h')
| -rw-r--r-- | include/linux/i2c/twl4030.h | 90 |
1 files changed, 51 insertions, 39 deletions
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index fb604dcd38f1..8137f660a5cc 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 * for the value, and populate your data starting at offset 1. */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ @@ -234,6 +234,9 @@ struct twl4030_gpio_platform_data { /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ u8 mmc_cd; + /* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */ + u32 debounce; + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup * should be enabled. Else, if that bit is set in "pulldowns", * that pulldown is enabled. Don't waste power by letting any @@ -278,6 +281,18 @@ struct twl4030_platform_data { struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + /* LDO regulators */ + struct regulator_init_data *vdac; + struct regulator_init_data *vpll1; + struct regulator_init_data *vpll2; + struct regulator_init_data *vmmc1; + struct regulator_init_data *vmmc2; + struct regulator_init_data *vsim; + struct regulator_init_data *vaux1; + struct regulator_init_data *vaux2; + struct regulator_init_data *vaux3; + struct regulator_init_data *vaux4; + /* REVISIT more to come ... _nothing_ should be hard-wired */ }; @@ -285,33 +300,6 @@ struct twl4030_platform_data { int twl4030_sih_setup(int module); -/* - * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the - * IRQ data to subsidiary devices using platform device resources. - */ - -/* IRQ information-need base */ -#include <mach/irqs.h> -/* TWL4030 interrupts */ - -/* #define TWL4030_MODIRQ_GPIO (TWL4030_IRQ_BASE + 0) */ -#define TWL4030_MODIRQ_KEYPAD (TWL4030_IRQ_BASE + 1) -#define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2) -#define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3) -/* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */ -/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */ - -#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) -/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */ -/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */ -/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */ -/* #define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) */ -/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) */ -/* #define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) */ -/* #define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) */ - -/* Rest are unsued currently*/ - /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B #define TWL4030_VDAC_DEDICATED 0x3E @@ -322,16 +310,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 -/* TWL4030 GPIO interrupt definitions */ - -#define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) - -/* - * Exported TWL4030 GPIO APIs - * - * WARNING -- use standard GPIO and IRQ calls instead; these will vanish. - */ -int twl4030_set_gpio_debounce(int gpio, int enable); #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) @@ -340,4 +318,38 @@ int twl4030_set_gpio_debounce(int gpio, int enable); static inline int twl4030charger_usb_en(int enable) { return 0; } #endif +/*----------------------------------------------------------------------*/ + +/* Linux-specific regulator identifiers ... for now, we only support + * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 + * need to tie into hardware based voltage scaling (cpufreq etc), while + * VIO is generally fixed. + */ + +/* EXTERNAL dc-to-dc buck converters */ +#define TWL4030_REG_VDD1 0 +#define TWL4030_REG_VDD2 1 +#define TWL4030_REG_VIO 2 + +/* EXTERNAL LDOs */ +#define TWL4030_REG_VDAC 3 +#define TWL4030_REG_VPLL1 4 +#define TWL4030_REG_VPLL2 5 /* not on all chips */ +#define TWL4030_REG_VMMC1 6 +#define TWL4030_REG_VMMC2 7 /* not on all chips */ +#define TWL4030_REG_VSIM 8 /* not on all chips */ +#define TWL4030_REG_VAUX1 9 /* not on all chips */ +#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ +#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ +#define TWL4030_REG_VAUX3 12 /* not on all chips */ +#define TWL4030_REG_VAUX4 13 /* not on all chips */ + +/* INTERNAL LDOs */ +#define TWL4030_REG_VINTANA1 14 +#define TWL4030_REG_VINTANA2 15 +#define TWL4030_REG_VINTDIG 16 +#define TWL4030_REG_VUSB1V5 17 +#define TWL4030_REG_VUSB1V8 18 +#define TWL4030_REG_VUSB3V1 19 + #endif /* End of __TWL4030_H */ |
