diff options
Diffstat (limited to 'include/linux/atmdev.h')
| -rw-r--r-- | include/linux/atmdev.h | 489 |
1 files changed, 489 insertions, 0 deletions
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h new file mode 100644 index 000000000000..9f374cfa1b05 --- /dev/null +++ b/include/linux/atmdev.h @@ -0,0 +1,489 @@ +/* atmdev.h - ATM device driver declarations and various related items */ + +/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef LINUX_ATMDEV_H +#define LINUX_ATMDEV_H + + +#include <linux/config.h> +#include <linux/atmapi.h> +#include <linux/atm.h> +#include <linux/atmioc.h> + + +#define ESI_LEN 6 + +#define ATM_OC3_PCR (155520000/270*260/8/53) + /* OC3 link rate: 155520000 bps + SONET overhead: /270*260 (9 section, 1 path) + bits per cell: /8/53 + max cell rate: 353207.547 cells/sec */ +#define ATM_25_PCR ((25600000/8-8000)/54) + /* 25 Mbps ATM cell rate (59111) */ +#define ATM_OC12_PCR (622080000/1080*1040/8/53) + /* OC12 link rate: 622080000 bps + SONET overhead: /1080*1040 + bits per cell: /8/53 + max cell rate: 1412830.188 cells/sec */ +#define ATM_DS3_PCR (8000*12) + /* DS3: 12 cells in a 125 usec time slot */ + + +#define __AAL_STAT_ITEMS \ + __HANDLE_ITEM(tx); /* TX okay */ \ + __HANDLE_ITEM(tx_err); /* TX errors */ \ + __HANDLE_ITEM(rx); /* RX okay */ \ + __HANDLE_ITEM(rx_err); /* RX errors */ \ + __HANDLE_ITEM(rx_drop); /* RX out of memory */ + +struct atm_aal_stats { +#define __HANDLE_ITEM(i) int i + __AAL_STAT_ITEMS +#undef __HANDLE_ITEM +}; + + +struct atm_dev_stats { + struct atm_aal_stats aal0; + struct atm_aal_stats aal34; + struct atm_aal_stats aal5; +} __ATM_API_ALIGN; + + +#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc) + /* get link rate */ +#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf) + /* get interface names (numbers) */ +#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc) + /* get interface type name */ +#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc) + /* get interface ESI */ +#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc) + /* get itf's local ATM addr. list */ +#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc) + /* reset itf's ATM address list */ +#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc) + /* add a local ATM address */ +#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc) + /* remove a local ATM address */ +#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc) + /* get connection identifier range */ +#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc) + /* set connection identifier range */ +#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc) + /* set interface ESI */ +#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc) + /* force interface ESI */ +#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc) + /* get AAL layer statistics */ +#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc) + /* get AAL layer statistics and zero */ +#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc) + /* get loopback mode */ +#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc) + /* set loopback mode */ +#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc) + /* query supported loopback modes */ +#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int) + /* enable or disable single-copy */ +#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t) + /* set backend handler */ +#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t) + /* use backend to make new if */ +#define ATM_ADDPARTY _IOW('a', ATMIOC_SPECIAL+4,struct atm_iobuf) + /* add party to p2mp call */ +#define ATM_DROPPARTY _IOW('a', ATMIOC_SPECIAL+5,int) + /* drop party from p2mp call */ + +/* + * These are backend handkers that can be set via the ATM_SETBACKEND call + * above. In the future we may support dynamic loading of these - for now, + * they're just being used to share the ATMIOC_BACKEND ioctls + */ +#define ATM_BACKEND_RAW 0 +#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ +#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ + +/* for ATM_GETTYPE */ +#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ + +/* + * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP + */ + +/* Point of loopback CPU-->SAR-->PHY-->line--> ... */ +#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */ +#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */ +#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */ +/* RESERVED 4 loop back on PHY side ---' */ +#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */ +#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */ + +/* Direction of loopback */ +#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */ +#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */ + +#define __ATM_LM_XTLOC(n) ((n) & 0xff) +#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff) + +#define ATM_LM_NONE 0 /* no loopback */ + +#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL) +#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM) +#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY) +#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG) + +#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL) +#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM) +#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY) +#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG) + +/* + * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that + * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x) + */ + + +struct atm_iobuf { + int length; + void __user *buffer; +}; + +/* for ATM_GETCIRANGE / ATM_SETCIRANGE */ + +#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */ + +struct atm_cirange { + signed char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */ + signed char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */ +}; + +/* for ATM_SETSC; actually taken from the ATM_VF number space */ + +#define ATM_SC_RX 1024 /* enable RX single-copy */ +#define ATM_SC_TX 2048 /* enable TX single-copy */ + +#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out + anyway */ + +/* MF: change_qos (Modify) flags */ + +#define ATM_MF_IMMED 1 /* Block until change is effective */ +#define ATM_MF_INC_RSV 2 /* Change reservation on increase */ +#define ATM_MF_INC_SHP 4 /* Change shaping on increase */ +#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */ +#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */ +#define ATM_MF_BWD 32 /* Set the backward direction parameters */ + +#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \ + ATM_MF_DEC_SHP | ATM_MF_BWD) + +/* + * ATM_VS_* are used to express VC state in a human-friendly way. + */ + +#define ATM_VS_IDLE 0 /* VC is not used */ +#define ATM_VS_CONNECTED 1 /* VC is connected */ +#define ATM_VS_CLOSING 2 /* VC is closing */ +#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */ +#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */ +#define ATM_VS_BOUND 5 /* VC is bound */ + +#define ATM_VS2TXT_MAP \ + "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND" + +#define ATM_VF2TXT_MAP \ + "ADDR", "READY", "PARTIAL", "REGIS", \ + "RELEASED", "HASQOS", "LISTEN", "META", \ + "256", "512", "1024", "2048", \ + "SESSION", "HASSAP", "BOUND", "CLOSE" + + +#ifdef __KERNEL__ + +#include <linux/wait.h> /* wait_queue_head_t */ +#include <linux/time.h> /* struct timeval */ +#include <linux/net.h> +#include <linux/skbuff.h> /* struct sk_buff */ +#include <linux/uio.h> +#include <net/sock.h> +#include <asm/atomic.h> + +#ifdef CONFIG_PROC_FS +#include <linux/proc_fs.h> + +extern struct proc_dir_entry *atm_proc_root; +#endif + + +struct k_atm_aal_stats { +#define __HANDLE_ITEM(i) atomic_t i + __AAL_STAT_ITEMS +#undef __HANDLE_ITEM +}; + + +struct k_atm_dev_stats { + struct k_atm_aal_stats aal0; + struct k_atm_aal_stats aal34; + struct k_atm_aal_stats aal5; +}; + + +enum { + ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared + by device driver. */ + ATM_VF_READY, /* VC is ready to transfer data. Set by device + driver, cleared by anybody. */ + ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC + setup), controlled by socket layer */ + ATM_VF_REGIS, /* registered with demon, controlled by SVC + socket layer */ + ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket + layer */ + ATM_VF_RELEASED, /* demon has indicated/requested release, + controlled by SVC socket layer */ + ATM_VF_HASQOS, /* QOS parameters have been set */ + ATM_VF_LISTEN, /* socket is used for listening */ + ATM_VF_META, /* SVC socket isn't used for normal data + traffic and doesn't depend on signaling + to be available */ + ATM_VF_SESSION, /* VCC is p2mp session control descriptor */ + ATM_VF_HASSAP, /* SAP has been set */ + ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/ + ATM_VF_WAITING, /* waiting for reply from sigd */ + ATM_VF_IS_CLIP, /* in use by CLIP protocol */ +}; + + +#define ATM_VF2VS(flags) \ + (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \ + test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \ + test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \ + test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \ + test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE) + + +enum { + ATM_DF_CLOSE, /* close device when last VCC is closed */ +}; + + +#define ATM_PHY_SIG_LOST 0 /* no carrier/light */ +#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */ +#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */ + +#define ATM_ATMOPT_CLP 1 /* set CLP bit */ + +struct atm_vcc { + /* struct sock has to be the first member of atm_vcc */ + struct sock sk; + unsigned long flags; /* VCC flags (ATM_VF_*) */ + short vpi; /* VPI and VCI (types must be equal */ + /* with sockaddr) */ + int vci; + unsigned long aal_options; /* AAL layer options */ + unsigned long atm_options; /* ATM layer options */ + struct atm_dev *dev; /* device back pointer */ + struct atm_qos qos; /* QOS */ + struct atm_sap sap; /* SAP */ + void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); + void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ + int (*push_oam)(struct atm_vcc *vcc,void *cell); + int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); + void *dev_data; /* per-device data */ + void *proto_data; /* per-protocol data */ + struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ + /* SVC part --- may move later ------------------------------------- */ + short itf; /* interface number */ + struct sockaddr_atmsvc local; + struct sockaddr_atmsvc remote; + /* Multipoint part ------------------------------------------------- */ + struct atm_vcc *session; /* session VCC descriptor */ + /* Other stuff ----------------------------------------------------- */ + void *user_back; /* user backlink - not touched by */ + /* native ATM stack. Currently used */ + /* by CLIP and sch_atm. */ +}; + +static inline struct atm_vcc *atm_sk(struct sock *sk) +{ + return (struct atm_vcc *)sk; +} + +static inline struct atm_vcc *ATM_SD(struct socket *sock) +{ + return atm_sk(sock->sk); +} + +static inline struct sock *sk_atm(struct atm_vcc *vcc) +{ + return (struct sock *)vcc; +} + +struct atm_dev_addr { + struct sockaddr_atmsvc addr; /* ATM address */ + struct list_head entry; /* next address */ +}; + +struct atm_dev { + const struct atmdev_ops *ops; /* device operations; NULL if unused */ + const struct atmphy_ops *phy; /* PHY operations, may be undefined */ + /* (NULL) */ + const char *type; /* device type name */ + int number; /* device index */ + void *dev_data; /* per-device data */ + void *phy_data; /* private PHY date */ + unsigned long flags; /* device flags (ATM_DF_*) */ + struct list_head local; /* local ATM addresses */ + unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */ + struct atm_cirange ci_range; /* VPI/VCI range */ + struct k_atm_dev_stats stats; /* statistics */ + char signal; /* signal status (ATM_PHY_SIG_*) */ + int link_rate; /* link rate (default: OC3) */ + atomic_t refcnt; /* reference count */ + spinlock_t lock; /* protect internal members */ +#ifdef CONFIG_PROC_FS + struct proc_dir_entry *proc_entry; /* proc entry */ + char *proc_name; /* proc entry name */ +#endif + struct list_head dev_list; /* linkage */ +}; + + +/* OF: send_Oam Flags */ + +#define ATM_OF_IMMED 1 /* Attempt immediate delivery */ +#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */ + + +/* + * ioctl, getsockopt, and setsockopt are optional and can be set to NULL. + */ + +struct atmdev_ops { /* only send is required */ + void (*dev_close)(struct atm_dev *dev); + int (*open)(struct atm_vcc *vcc); + void (*close)(struct atm_vcc *vcc); + int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); + int (*getsockopt)(struct atm_vcc *vcc,int level,int optname, + void __user *optval,int optlen); + int (*setsockopt)(struct atm_vcc *vcc,int level,int optname, + void __user *optval,int optlen); + int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); + int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags); + void (*phy_put)(struct atm_dev *dev,unsigned char value, + unsigned long addr); + unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr); + int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags); + int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page); + struct module *owner; +}; + +struct atmphy_ops { + int (*start)(struct atm_dev *dev); + int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); + void (*interrupt)(struct atm_dev *dev); + int (*stop)(struct atm_dev *dev); +}; + +struct atm_skb_data { + struct atm_vcc *vcc; /* ATM VCC */ + unsigned long atm_options; /* ATM layer options */ +}; + +#define VCC_HTABLE_SIZE 32 + +extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE]; +extern rwlock_t vcc_sklist_lock; + +#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb)) + +struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops, + int number,unsigned long *flags); /* number == -1: pick first available */ +struct atm_dev *atm_dev_lookup(int number); +void atm_dev_deregister(struct atm_dev *dev); +void shutdown_atm_dev(struct atm_dev *dev); +void vcc_insert_socket(struct sock *sk); + + +/* + * This is approximately the algorithm used by alloc_skb. + * + */ + +static inline int atm_guess_pdu2truesize(int size) +{ + return (SKB_DATA_ALIGN(size) + sizeof(struct skb_shared_info)); +} + + +static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) +{ + atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc); +} + + +static inline void atm_return(struct atm_vcc *vcc,int truesize) +{ + atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc); +} + + +static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size) +{ + return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) < + sk_atm(vcc)->sk_sndbuf; +} + + +static inline void atm_dev_hold(struct atm_dev *dev) +{ + atomic_inc(&dev->refcnt); +} + + +static inline void atm_dev_put(struct atm_dev *dev) +{ + atomic_dec(&dev->refcnt); + + if ((atomic_read(&dev->refcnt) == 1) && + test_bit(ATM_DF_CLOSE,&dev->flags)) + shutdown_atm_dev(dev); +} + + +int atm_charge(struct atm_vcc *vcc,int truesize); +struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, + int gfp_flags); +int atm_pcr_goal(struct atm_trafprm *tp); + +void vcc_release_async(struct atm_vcc *vcc, int reply); + +struct atm_ioctl { + struct module *owner; + /* A module reference is kept if appropriate over this call. + * Return -ENOIOCTLCMD if you don't handle it. */ + int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg); + struct list_head list; +}; + +/** + * register_atm_ioctl - register handler for ioctl operations + * + * Special (non-device) handlers of ioctl's should + * register here. If you're a normal device, you should + * set .ioctl in your atmdev_ops instead. + */ +void register_atm_ioctl(struct atm_ioctl *); + +/** + * deregister_atm_ioctl - remove the ioctl handler + */ +void deregister_atm_ioctl(struct atm_ioctl *); + +#endif /* __KERNEL__ */ + +#endif |
