diff options
Diffstat (limited to 'include/asm-sparc/tsb.h')
| -rw-r--r-- | include/asm-sparc/tsb.h | 283 |
1 files changed, 0 insertions, 283 deletions
diff --git a/include/asm-sparc/tsb.h b/include/asm-sparc/tsb.h deleted file mode 100644 index 76e4299dd9bc..000000000000 --- a/include/asm-sparc/tsb.h +++ /dev/null @@ -1,283 +0,0 @@ -#ifndef _SPARC64_TSB_H -#define _SPARC64_TSB_H - -/* The sparc64 TSB is similar to the powerpc hashtables. It's a - * power-of-2 sized table of TAG/PTE pairs. The cpu precomputes - * pointers into this table for 8K and 64K page sizes, and also a - * comparison TAG based upon the virtual address and context which - * faults. - * - * TLB miss trap handler software does the actual lookup via something - * of the form: - * - * ldxa [%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1 - * ldxa [%g0] ASI_{D,I}MMU, %g6 - * sllx %g6, 22, %g6 - * srlx %g6, 22, %g6 - * ldda [%g1] ASI_NUCLEUS_QUAD_LDD, %g4 - * cmp %g4, %g6 - * bne,pn %xcc, tsb_miss_{d,i}tlb - * mov FAULT_CODE_{D,I}TLB, %g3 - * stxa %g5, [%g0] ASI_{D,I}TLB_DATA_IN - * retry - * - * - * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte - * PTE. The TAG is of the same layout as the TLB TAG TARGET mmu - * register which is: - * - * ------------------------------------------------- - * | - | CONTEXT | - | VADDR bits 63:22 | - * ------------------------------------------------- - * 63 61 60 48 47 42 41 0 - * - * But actually, since we use per-mm TSB's, we zero out the CONTEXT - * field. - * - * Like the powerpc hashtables we need to use locking in order to - * synchronize while we update the entries. PTE updates need locking - * as well. - * - * We need to carefully choose a lock bits for the TSB entry. We - * choose to use bit 47 in the tag. Also, since we never map anything - * at page zero in context zero, we use zero as an invalid tag entry. - * When the lock bit is set, this forces a tag comparison failure. - */ - -#define TSB_TAG_LOCK_BIT 47 -#define TSB_TAG_LOCK_HIGH (1 << (TSB_TAG_LOCK_BIT - 32)) - -#define TSB_TAG_INVALID_BIT 46 -#define TSB_TAG_INVALID_HIGH (1 << (TSB_TAG_INVALID_BIT - 32)) - -#define TSB_MEMBAR membar #StoreStore - -/* Some cpus support physical address quad loads. We want to use - * those if possible so we don't need to hard-lock the TSB mapping - * into the TLB. We encode some instruction patching in order to - * support this. - * - * The kernel TSB is locked into the TLB by virtue of being in the - * kernel image, so we don't play these games for swapper_tsb access. - */ -#ifndef __ASSEMBLY__ -struct tsb_ldquad_phys_patch_entry { - unsigned int addr; - unsigned int sun4u_insn; - unsigned int sun4v_insn; -}; -extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch, - __tsb_ldquad_phys_patch_end; - -struct tsb_phys_patch_entry { - unsigned int addr; - unsigned int insn; -}; -extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end; -#endif -#define TSB_LOAD_QUAD(TSB, REG) \ -661: ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; \ - .section .tsb_ldquad_phys_patch, "ax"; \ - .word 661b; \ - ldda [TSB] ASI_QUAD_LDD_PHYS, REG; \ - ldda [TSB] ASI_QUAD_LDD_PHYS_4V, REG; \ - .previous - -#define TSB_LOAD_TAG_HIGH(TSB, REG) \ -661: lduwa [TSB] ASI_N, REG; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - lduwa [TSB] ASI_PHYS_USE_EC, REG; \ - .previous - -#define TSB_LOAD_TAG(TSB, REG) \ -661: ldxa [TSB] ASI_N, REG; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - ldxa [TSB] ASI_PHYS_USE_EC, REG; \ - .previous - -#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \ -661: casa [TSB] ASI_N, REG1, REG2; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - casa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ - .previous - -#define TSB_CAS_TAG(TSB, REG1, REG2) \ -661: casxa [TSB] ASI_N, REG1, REG2; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - casxa [TSB] ASI_PHYS_USE_EC, REG1, REG2; \ - .previous - -#define TSB_STORE(ADDR, VAL) \ -661: stxa VAL, [ADDR] ASI_N; \ - .section .tsb_phys_patch, "ax"; \ - .word 661b; \ - stxa VAL, [ADDR] ASI_PHYS_USE_EC; \ - .previous - -#define TSB_LOCK_TAG(TSB, REG1, REG2) \ -99: TSB_LOAD_TAG_HIGH(TSB, REG1); \ - sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ - andcc REG1, REG2, %g0; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_CAS_TAG_HIGH(TSB, REG1, REG2); \ - cmp REG1, REG2; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_MEMBAR - -#define TSB_WRITE(TSB, TTE, TAG) \ - add TSB, 0x8, TSB; \ - TSB_STORE(TSB, TTE); \ - sub TSB, 0x8, TSB; \ - TSB_MEMBAR; \ - TSB_STORE(TSB, TAG); - -#define KTSB_LOAD_QUAD(TSB, REG) \ - ldda [TSB] ASI_NUCLEUS_QUAD_LDD, REG; - -#define KTSB_STORE(ADDR, VAL) \ - stxa VAL, [ADDR] ASI_N; - -#define KTSB_LOCK_TAG(TSB, REG1, REG2) \ -99: lduwa [TSB] ASI_N, REG1; \ - sethi %hi(TSB_TAG_LOCK_HIGH), REG2;\ - andcc REG1, REG2, %g0; \ - bne,pn %icc, 99b; \ - nop; \ - casa [TSB] ASI_N, REG1, REG2;\ - cmp REG1, REG2; \ - bne,pn %icc, 99b; \ - nop; \ - TSB_MEMBAR - -#define KTSB_WRITE(TSB, TTE, TAG) \ - add TSB, 0x8, TSB; \ - stxa TTE, [TSB] ASI_N; \ - sub TSB, 0x8, TSB; \ - TSB_MEMBAR; \ - stxa TAG, [TSB] ASI_N; - - /* Do a kernel page table walk. Leaves physical PTE pointer in - * REG1. Jumps to FAIL_LABEL on early page table walk termination. - * VADDR will not be clobbered, but REG2 will. - */ -#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL) \ - sethi %hi(swapper_pg_dir), REG1; \ - or REG1, %lo(swapper_pg_dir), REG1; \ - sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - andn REG2, 0x3, REG2; \ - lduw [REG1 + REG2], REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x3, REG2; \ - lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - PMD_SHIFT, REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x7, REG2; \ - add REG1, REG2, REG1; - - /* Do a user page table walk in MMU globals. Leaves physical PTE - * pointer in REG1. Jumps to FAIL_LABEL on early page table walk - * termination. Physical base of page tables is in PHYS_PGD which - * will not be modified. - * - * VADDR will not be clobbered, but REG1 and REG2 will. - */ -#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL) \ - sllx VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - andn REG2, 0x3, REG2; \ - lduwa [PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x3, REG2; \ - lduwa [REG1 + REG2] ASI_PHYS_USE_EC, REG1; \ - brz,pn REG1, FAIL_LABEL; \ - sllx VADDR, 64 - PMD_SHIFT, REG2; \ - srlx REG2, 64 - PAGE_SHIFT, REG2; \ - sllx REG1, 11, REG1; \ - andn REG2, 0x7, REG2; \ - add REG1, REG2, REG1; - -/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0. - * If no entry is found, FAIL_LABEL will be branched to. On success - * the resulting PTE value will be left in REG1. VADDR is preserved - * by this routine. - */ -#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \ - sethi %hi(prom_trans), REG1; \ - or REG1, %lo(prom_trans), REG1; \ -97: ldx [REG1 + 0x00], REG2; \ - brz,pn REG2, FAIL_LABEL; \ - nop; \ - ldx [REG1 + 0x08], REG3; \ - add REG2, REG3, REG3; \ - cmp REG2, VADDR; \ - bgu,pt %xcc, 98f; \ - cmp VADDR, REG3; \ - bgeu,pt %xcc, 98f; \ - ldx [REG1 + 0x10], REG3; \ - sub VADDR, REG2, REG2; \ - ba,pt %xcc, 99f; \ - add REG3, REG2, REG1; \ -98: ba,pt %xcc, 97b; \ - add REG1, (3 * 8), REG1; \ -99: - - /* We use a 32K TSB for the whole kernel, this allows to - * handle about 16MB of modules and vmalloc mappings without - * incurring many hash conflicts. - */ -#define KERNEL_TSB_SIZE_BYTES (32 * 1024) -#define KERNEL_TSB_NENTRIES \ - (KERNEL_TSB_SIZE_BYTES / 16) -#define KERNEL_TSB4M_NENTRIES 4096 - - /* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL - * on TSB hit. REG1, REG2, REG3, and REG4 are used as temporaries - * and the found TTE will be left in REG1. REG3 and REG4 must - * be an even/odd pair of registers. - * - * VADDR and TAG will be preserved and not clobbered by this macro. - */ -#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ - sethi %hi(swapper_tsb), REG1; \ - or REG1, %lo(swapper_tsb), REG1; \ - srlx VADDR, PAGE_SHIFT, REG2; \ - and REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \ - sllx REG2, 4, REG2; \ - add REG1, REG2, REG2; \ - KTSB_LOAD_QUAD(REG2, REG3); \ - cmp REG3, TAG; \ - be,a,pt %xcc, OK_LABEL; \ - mov REG4, REG1; - -#ifndef CONFIG_DEBUG_PAGEALLOC - /* This version uses a trick, the TAG is already (VADDR >> 22) so - * we can make use of that for the index computation. - */ -#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \ - sethi %hi(swapper_4m_tsb), REG1; \ - or REG1, %lo(swapper_4m_tsb), REG1; \ - and TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \ - sllx REG2, 4, REG2; \ - add REG1, REG2, REG2; \ - KTSB_LOAD_QUAD(REG2, REG3); \ - cmp REG3, TAG; \ - be,a,pt %xcc, OK_LABEL; \ - mov REG4, REG1; -#endif - -#endif /* !(_SPARC64_TSB_H) */ |
