diff options
Diffstat (limited to 'include/asm-powerpc/ucc_slow.h')
-rw-r--r-- | include/asm-powerpc/ucc_slow.h | 290 |
1 files changed, 0 insertions, 290 deletions
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h deleted file mode 100644 index 0980e6ad335b..000000000000 --- a/include/asm-powerpc/ucc_slow.h +++ /dev/null @@ -1,290 +0,0 @@ -/* - * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved. - * - * Authors: Shlomi Gridish <gridish@freescale.com> - * Li Yang <leoli@freescale.com> - * - * Description: - * Internal header file for UCC SLOW unit routines. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __UCC_SLOW_H__ -#define __UCC_SLOW_H__ - -#include <linux/kernel.h> - -#include <asm/immap_qe.h> -#include <asm/qe.h> - -#include "ucc.h" - -/* transmit BD's status */ -#define T_R 0x80000000 /* ready bit */ -#define T_PAD 0x40000000 /* add pads to short frames */ -#define T_W 0x20000000 /* wrap bit */ -#define T_I 0x10000000 /* interrupt on completion */ -#define T_L 0x08000000 /* last */ - -#define T_A 0x04000000 /* Address - the data transmitted as address - chars */ -#define T_TC 0x04000000 /* transmit CRC */ -#define T_CM 0x02000000 /* continuous mode */ -#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ -#define T_P 0x01000000 /* Preamble - send Preamble sequence before - data */ -#define T_HB 0x01000000 /* heartbeat */ -#define T_NS 0x00800000 /* No Stop */ -#define T_LC 0x00800000 /* late collision */ -#define T_RL 0x00400000 /* retransmission limit */ -#define T_UN 0x00020000 /* underrun */ -#define T_CT 0x00010000 /* CTS lost */ -#define T_CSL 0x00010000 /* carrier sense lost */ -#define T_RC 0x003c0000 /* retry count */ - -/* Receive BD's status */ -#define R_E 0x80000000 /* buffer empty */ -#define R_W 0x20000000 /* wrap bit */ -#define R_I 0x10000000 /* interrupt on reception */ -#define R_L 0x08000000 /* last */ -#define R_C 0x08000000 /* the last byte in this buffer is a cntl - char */ -#define R_F 0x04000000 /* first */ -#define R_A 0x04000000 /* the first byte in this buffer is address - byte */ -#define R_CM 0x02000000 /* continuous mode */ -#define R_ID 0x01000000 /* buffer close on reception of idles */ -#define R_M 0x01000000 /* Frame received because of promiscuous - mode */ -#define R_AM 0x00800000 /* Address match */ -#define R_DE 0x00800000 /* Address match */ -#define R_LG 0x00200000 /* Break received */ -#define R_BR 0x00200000 /* Frame length violation */ -#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ -#define R_FR 0x00100000 /* Framing Error (no stop bit) character - received */ -#define R_PR 0x00080000 /* Parity Error character received */ -#define R_AB 0x00080000 /* Frame Aborted */ -#define R_SH 0x00080000 /* frame is too short */ -#define R_CR 0x00040000 /* CRC Error */ -#define R_OV 0x00020000 /* Overrun */ -#define R_CD 0x00010000 /* CD lost */ -#define R_CL 0x00010000 /* this frame is closed because of a - collision */ - -/* Rx Data buffer must be 4 bytes aligned in most cases.*/ -#define UCC_SLOW_RX_ALIGN 4 -#define UCC_SLOW_MRBLR_ALIGNMENT 4 -#define UCC_SLOW_PRAM_SIZE 0x100 -#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 - -/* UCC Slow Channel Protocol Mode */ -enum ucc_slow_channel_protocol_mode { - UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, - UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, -}; - -/* UCC Slow Transparent Transmit CRC (TCRC) */ -enum ucc_slow_transparent_tcrc { - /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, - /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ - UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, - /* 32-bit CCITT CRC (Ethernet and HDLC) */ - UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, -}; - -/* UCC Slow oversampling rate for transmitter (TDCR) */ -enum ucc_slow_tx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, -}; - -/* UCC Slow Oversampling rate for receiver (RDCR) -*/ -enum ucc_slow_rx_oversampling_rate { - /* 1x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, - /* 8x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, - /* 16x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, - /* 32x clock mode */ - UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, -}; - -/* UCC Slow Transmitter encoding method (TENC) -*/ -enum ucc_slow_tx_encoding_method { - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, - UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 -}; - -/* UCC Slow Receiver decoding method (RENC) -*/ -enum ucc_slow_rx_decoding_method { - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, - UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 -}; - -/* UCC Slow Diagnostic mode (DIAG) -*/ -enum ucc_slow_diag_mode { - UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, - UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, - UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, - UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 -}; - -struct ucc_slow_info { - int ucc_num; - int protocol; /* QE_CR_PROTOCOL_xxx */ - enum qe_clock rx_clock; - enum qe_clock tx_clock; - phys_addr_t regs; - int irq; - u16 uccm_mask; - int data_mem_part; - int init_tx; - int init_rx; - u32 tx_bd_ring_len; - u32 rx_bd_ring_len; - int rx_interrupts; - int brkpt_support; - int grant_support; - int tsa; - int cdp; - int cds; - int ctsp; - int ctss; - int rinv; - int tinv; - int rtsm; - int rfw; - int tci; - int tend; - int tfl; - int txsy; - u16 max_rx_buf_length; - enum ucc_slow_transparent_tcrc tcrc; - enum ucc_slow_channel_protocol_mode mode; - enum ucc_slow_diag_mode diag; - enum ucc_slow_tx_oversampling_rate tdcr; - enum ucc_slow_rx_oversampling_rate rdcr; - enum ucc_slow_tx_encoding_method tenc; - enum ucc_slow_rx_decoding_method renc; -}; - -struct ucc_slow_private { - struct ucc_slow_info *us_info; - struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ - struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */ - u32 us_pram_offset; - int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ - int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ - int stopped_tx; /* Whether channel has been stopped for Tx - (STOP_TX, etc.) */ - int stopped_rx; /* Whether channel has been stopped for Rx */ - struct list_head confQ; /* frames passed to chip waiting for tx */ - u32 first_tx_bd_mask; /* mask is used in Tx routine to save status - and length for first BD in a frame */ - u32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ - u32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ - struct qe_bd *confBd; /* next BD for confirm after Tx */ - struct qe_bd *tx_bd; /* next BD for new Tx request */ - struct qe_bd *rx_bd; /* next BD to collect after Rx */ - void *p_rx_frame; /* accumulating receive frame */ - u16 *p_ucce; /* a pointer to the event register in memory. - */ - u16 *p_uccm; /* a pointer to the mask register in memory */ - u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ -#ifdef STATISTICS - u32 tx_frames; /* Transmitted frames counters */ - u32 rx_frames; /* Received frames counters (only frames - passed to application) */ - u32 rx_discarded; /* Discarded frames counters (frames that - were discarded by the driver due to - errors) */ -#endif /* STATISTICS */ -}; - -/* ucc_slow_init - * Initializes Slow UCC according to provided parameters. - * - * us_info - (In) pointer to the slow UCC info structure. - * uccs_ret - (Out) pointer to the slow UCC structure. - */ -int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); - -/* ucc_slow_free - * Frees all resources for slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_free(struct ucc_slow_private * uccs); - -/* ucc_slow_enable - * Enables a fast UCC port. - * This routine enables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_disable - * Disables a fast UCC port. - * This routine disables Tx and/or Rx through the General UCC Mode Register. - * - * uccs - (In) pointer to the slow UCC structure. - * mode - (In) TX, RX, or both. - */ -void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); - -/* ucc_slow_poll_transmitter_now - * Immediately forces a poll of the transmitter for data to be sent. - * Typically, the hardware performs a periodic poll for data that the - * transmit routine has set up to be transmitted. In cases where - * this polling cycle is not soon enough, this optional routine can - * be invoked to force a poll right away, instead. Proper use for - * each transmission for which this functionality is desired is to - * call the transmit routine and then this routine right after. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs); - -/* ucc_slow_graceful_stop_tx - * Smoothly stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_stop_tx - * Stops transmission on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_stop_tx(struct ucc_slow_private * uccs); - -/* ucc_slow_restart_tx - * Restarts transmitting on a specified slow UCC. - * - * uccs - (In) pointer to the slow UCC structure. - */ -void ucc_slow_restart_tx(struct ucc_slow_private *uccs); - -u32 ucc_slow_get_qe_cr_subblock(int uccs_num); - -#endif /* __UCC_SLOW_H__ */ |