summaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc/hvcall.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-powerpc/hvcall.h')
-rw-r--r--include/asm-powerpc/hvcall.h296
1 files changed, 0 insertions, 296 deletions
diff --git a/include/asm-powerpc/hvcall.h b/include/asm-powerpc/hvcall.h
deleted file mode 100644
index fbe2932fa9e9..000000000000
--- a/include/asm-powerpc/hvcall.h
+++ /dev/null
@@ -1,296 +0,0 @@
-#ifndef _ASM_POWERPC_HVCALL_H
-#define _ASM_POWERPC_HVCALL_H
-#ifdef __KERNEL__
-
-#define HVSC .long 0x44000022
-
-#define H_SUCCESS 0
-#define H_BUSY 1 /* Hardware busy -- retry later */
-#define H_CLOSED 2 /* Resource closed */
-#define H_NOT_AVAILABLE 3
-#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
-#define H_PARTIAL 5
-#define H_IN_PROGRESS 14 /* Kind of like busy */
-#define H_PAGE_REGISTERED 15
-#define H_PARTIAL_STORE 16
-#define H_PENDING 17 /* returned from H_POLL_PENDING */
-#define H_CONTINUE 18 /* Returned from H_Join on success */
-#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
-#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
- is a good time to retry */
-#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
- is a good time to retry */
-#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
-#define H_HARDWARE -1 /* Hardware error */
-#define H_FUNCTION -2 /* Function not supported */
-#define H_PRIVILEGE -3 /* Caller not privileged */
-#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
-#define H_BAD_MODE -5 /* Illegal msr value */
-#define H_PTEG_FULL -6 /* PTEG is full */
-#define H_NOT_FOUND -7 /* PTE was not found" */
-#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
-#define H_NO_MEM -9
-#define H_AUTHORITY -10
-#define H_PERMISSION -11
-#define H_DROPPED -12
-#define H_SOURCE_PARM -13
-#define H_DEST_PARM -14
-#define H_REMOTE_PARM -15
-#define H_RESOURCE -16
-#define H_ADAPTER_PARM -17
-#define H_RH_PARM -18
-#define H_RCQ_PARM -19
-#define H_SCQ_PARM -20
-#define H_EQ_PARM -21
-#define H_RT_PARM -22
-#define H_ST_PARM -23
-#define H_SIGT_PARM -24
-#define H_TOKEN_PARM -25
-#define H_MLENGTH_PARM -27
-#define H_MEM_PARM -28
-#define H_MEM_ACCESS_PARM -29
-#define H_ATTR_PARM -30
-#define H_PORT_PARM -31
-#define H_MCG_PARM -32
-#define H_VL_PARM -33
-#define H_TSIZE_PARM -34
-#define H_TRACE_PARM -35
-
-#define H_MASK_PARM -37
-#define H_MCG_FULL -38
-#define H_ALIAS_EXIST -39
-#define H_P_COUNTER -40
-#define H_TABLE_FULL -41
-#define H_ALT_TABLE -42
-#define H_MR_CONDITION -43
-#define H_NOT_ENOUGH_RESOURCES -44
-#define H_R_STATE -45
-#define H_RESCINDEND -46
-
-
-/* Long Busy is a condition that can be returned by the firmware
- * when a call cannot be completed now, but the identical call
- * should be retried later. This prevents calls blocking in the
- * firmware for long periods of time. Annoyingly the firmware can return
- * a range of return codes, hinting at how long we should wait before
- * retrying. If you don't care for the hint, the macro below is a good
- * way to check for the long_busy return codes
- */
-#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
- && (x <= H_LONG_BUSY_END_RANGE))
-
-/* Flags */
-#define H_LARGE_PAGE (1UL<<(63-16))
-#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
-#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
-#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */
-#define H_PAGE_STATE_CHANGE (1UL<<(63-28))
-#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30)))
-#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
-#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31)))
-#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
-#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */
-#define H_ANDCOND (1UL<<(63-33))
-#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
-#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
-#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
-#define H_COPY_PAGE (1UL<<(63-49))
-#define H_N (1UL<<(63-61))
-#define H_PP1 (1UL<<(63-62))
-#define H_PP2 (1UL<<(63-63))
-
-/* VASI States */
-#define H_VASI_INVALID 0
-#define H_VASI_ENABLED 1
-#define H_VASI_ABORTED 2
-#define H_VASI_SUSPENDING 3
-#define H_VASI_SUSPENDED 4
-#define H_VASI_RESUMED 5
-#define H_VASI_COMPLETED 6
-
-/* DABRX flags */
-#define H_DABRX_HYPERVISOR (1UL<<(63-61))
-#define H_DABRX_KERNEL (1UL<<(63-62))
-#define H_DABRX_USER (1UL<<(63-63))
-
-/* Each control block has to be on a 4K bondary */
-#define H_CB_ALIGNMENT 4096
-
-/* pSeries hypervisor opcodes */
-#define H_REMOVE 0x04
-#define H_ENTER 0x08
-#define H_READ 0x0c
-#define H_CLEAR_MOD 0x10
-#define H_CLEAR_REF 0x14
-#define H_PROTECT 0x18
-#define H_GET_TCE 0x1c
-#define H_PUT_TCE 0x20
-#define H_SET_SPRG0 0x24
-#define H_SET_DABR 0x28
-#define H_PAGE_INIT 0x2c
-#define H_SET_ASR 0x30
-#define H_ASR_ON 0x34
-#define H_ASR_OFF 0x38
-#define H_LOGICAL_CI_LOAD 0x3c
-#define H_LOGICAL_CI_STORE 0x40
-#define H_LOGICAL_CACHE_LOAD 0x44
-#define H_LOGICAL_CACHE_STORE 0x48
-#define H_LOGICAL_ICBI 0x4c
-#define H_LOGICAL_DCBF 0x50
-#define H_GET_TERM_CHAR 0x54
-#define H_PUT_TERM_CHAR 0x58
-#define H_REAL_TO_LOGICAL 0x5c
-#define H_HYPERVISOR_DATA 0x60
-#define H_EOI 0x64
-#define H_CPPR 0x68
-#define H_IPI 0x6c
-#define H_IPOLL 0x70
-#define H_XIRR 0x74
-#define H_PERFMON 0x7c
-#define H_MIGRATE_DMA 0x78
-#define H_REGISTER_VPA 0xDC
-#define H_CEDE 0xE0
-#define H_CONFER 0xE4
-#define H_PROD 0xE8
-#define H_GET_PPP 0xEC
-#define H_SET_PPP 0xF0
-#define H_PURR 0xF4
-#define H_PIC 0xF8
-#define H_REG_CRQ 0xFC
-#define H_FREE_CRQ 0x100
-#define H_VIO_SIGNAL 0x104
-#define H_SEND_CRQ 0x108
-#define H_COPY_RDMA 0x110
-#define H_REGISTER_LOGICAL_LAN 0x114
-#define H_FREE_LOGICAL_LAN 0x118
-#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
-#define H_SEND_LOGICAL_LAN 0x120
-#define H_BULK_REMOVE 0x124
-#define H_MULTICAST_CTRL 0x130
-#define H_SET_XDABR 0x134
-#define H_STUFF_TCE 0x138
-#define H_PUT_TCE_INDIRECT 0x13C
-#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
-#define H_VTERM_PARTNER_INFO 0x150
-#define H_REGISTER_VTERM 0x154
-#define H_FREE_VTERM 0x158
-#define H_RESET_EVENTS 0x15C
-#define H_ALLOC_RESOURCE 0x160
-#define H_FREE_RESOURCE 0x164
-#define H_MODIFY_QP 0x168
-#define H_QUERY_QP 0x16C
-#define H_REREGISTER_PMR 0x170
-#define H_REGISTER_SMR 0x174
-#define H_QUERY_MR 0x178
-#define H_QUERY_MW 0x17C
-#define H_QUERY_HCA 0x180
-#define H_QUERY_PORT 0x184
-#define H_MODIFY_PORT 0x188
-#define H_DEFINE_AQP1 0x18C
-#define H_GET_TRACE_BUFFER 0x190
-#define H_DEFINE_AQP0 0x194
-#define H_RESIZE_MR 0x198
-#define H_ATTACH_MCQP 0x19C
-#define H_DETACH_MCQP 0x1A0
-#define H_CREATE_RPT 0x1A4
-#define H_REMOVE_RPT 0x1A8
-#define H_REGISTER_RPAGES 0x1AC
-#define H_DISABLE_AND_GETC 0x1B0
-#define H_ERROR_DATA 0x1B4
-#define H_GET_HCA_INFO 0x1B8
-#define H_GET_PERF_COUNT 0x1BC
-#define H_MANAGE_TRACE 0x1C0
-#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
-#define H_QUERY_INT_STATE 0x1E4
-#define H_POLL_PENDING 0x1D8
-#define H_ILLAN_ATTRIBUTES 0x244
-#define H_JOIN 0x298
-#define H_VASI_STATE 0x2A4
-#define H_ENABLE_CRQ 0x2B0
-#define H_SET_MPP 0x2D0
-#define H_GET_MPP 0x2D4
-#define MAX_HCALL_OPCODE H_GET_MPP
-
-#ifndef __ASSEMBLY__
-
-/**
- * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
- * @opcode: The hypervisor call to make.
- *
- * This call supports up to 7 arguments and only returns the status of
- * the hcall. Use this version where possible, its slightly faster than
- * the other plpar_hcalls.
- */
-long plpar_hcall_norets(unsigned long opcode, ...);
-
-/**
- * plpar_hcall: - Make a pseries hypervisor call
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
- */
-#define PLPAR_HCALL_BUFSIZE 4
-long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 4 return arguments in.
- *
- * This call supports up to 6 arguments and 4 return arguments. Use
- * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
- *
- * Used when phyp interface needs to be called in real mode. Similar to
- * plpar_hcall, but plpar_hcall_raw works in real mode and does not
- * calculate hypervisor call statistics.
- */
-long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
-
-/**
- * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
- * @opcode: The hypervisor call to make.
- * @retbuf: Buffer to store up to 9 return arguments in.
- *
- * This call supports up to 9 arguments and 9 return arguments. Use
- * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
- */
-#define PLPAR_HCALL9_BUFSIZE 9
-long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
-
-/* For hcall instrumentation. One structure per-hcall, per-CPU */
-struct hcall_stats {
- unsigned long num_calls; /* number of calls (on this CPU) */
- unsigned long tb_total; /* total wall time (mftb) of calls. */
- unsigned long purr_total; /* total cpu time (PURR) of calls. */
-};
-#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1)
-
-struct hvcall_mpp_data {
- unsigned long entitled_mem;
- unsigned long mapped_mem;
- unsigned short group_num;
- unsigned short pool_num;
- unsigned char mem_weight;
- unsigned char unallocated_mem_weight;
- unsigned long unallocated_entitlement; /* value in bytes */
- unsigned long pool_size;
- signed long loan_request;
- unsigned long backing_mem;
-};
-
-int h_get_mpp(struct hvcall_mpp_data *);
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HVCALL_H */
OpenPOWER on IntegriCloud