diff options
Diffstat (limited to 'include/asm-powerpc/heathrow.h')
| -rw-r--r-- | include/asm-powerpc/heathrow.h | 67 |
1 files changed, 0 insertions, 67 deletions
diff --git a/include/asm-powerpc/heathrow.h b/include/asm-powerpc/heathrow.h deleted file mode 100644 index 93f54958a9d1..000000000000 --- a/include/asm-powerpc/heathrow.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _ASM_POWERPC_HEATHROW_H -#define _ASM_POWERPC_HEATHROW_H -#ifdef __KERNEL__ -/* - * heathrow.h: definitions for using the "Heathrow" I/O controller chip. - * - * Grabbed from Open Firmware definitions on a PowerBook G3 Series - * - * Copyright (C) 1997 Paul Mackerras. - */ - -/* Front light color on Yikes/B&W G3. 32 bits */ -#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */ - -/* Brightness/contrast (gossamer iMac ?). 8 bits */ -#define HEATHROW_BRIGHTNESS_CNTL 0x32 -#define HEATHROW_CONTRAST_CNTL 0x33 - -/* offset from ohare base for feature control register */ -#define HEATHROW_MBCR 0x34 /* Media bay control */ -#define HEATHROW_FCR 0x38 /* Feature control */ -#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */ - -/* - * Bits in feature control register. - * Bits postfixed with a _N are in inverse logic - */ -#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */ -#define HRW_BAY_POWER_N 0x00000002 -#define HRW_BAY_PCI_ENABLE 0x00000004 -#define HRW_BAY_IDE_ENABLE 0x00000008 -#define HRW_BAY_FLOPPY_ENABLE 0x00000010 -#define HRW_IDE0_ENABLE 0x00000020 -#define HRW_IDE0_RESET_N 0x00000040 -#define HRW_BAY_DEV_MASK 0x0000001c -#define HRW_BAY_RESET_N 0x00000080 -#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */ -#define HRW_SCC_ENABLE 0x00000200 -#define HRW_MESH_ENABLE 0x00000400 -#define HRW_SWIM_ENABLE 0x00000800 -#define HRW_SOUND_POWER_N 0x00001000 -#define HRW_SOUND_CLK_ENABLE 0x00002000 -#define HRW_SCCA_IO 0x00004000 -#define HRW_SCCB_IO 0x00008000 -#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */ -#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */ -#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */ -#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */ -#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */ -#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */ -#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */ -#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */ -#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */ -#define HRW_RESET_SCC 0x02000000 -#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */ -#define HRW_USE_MFDC 0x08000000 /* ??? (0) */ -#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */ -#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */ - -/* We OR those features at boot on desktop G3s */ -#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE) - -/* Looks like Heathrow has some sort of GPIOs as well... */ -#define HRW_GPIO_MODEM_RESET 0x6d - -#endif /* __KERNEL__ */ -#endif /* _ASM_POWERPC_HEATHROW_H */ |
