diff options
Diffstat (limited to 'include/asm-mips')
41 files changed, 315 insertions, 315 deletions
diff --git a/include/asm-mips/asmmacro.h b/include/asm-mips/asmmacro.h index 40ceedcf454e..30b18ea6cb11 100644 --- a/include/asm-mips/asmmacro.h +++ b/include/asm-mips/asmmacro.h @@ -7,10 +7,10 @@ */ #ifndef _ASM_ASMMACRO_H #define _ASM_ASMMACRO_H - + #include <linux/config.h> #include <asm/hazards.h> - + #ifdef CONFIG_32BIT #include <asm/asmmacro-32.h> #endif diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h index bc136dcfdbe6..eb8d79dba11c 100644 --- a/include/asm-mips/bitops.h +++ b/include/asm-mips/bitops.h @@ -20,13 +20,13 @@ #define SZLONG_MASK 31UL #define __LL "ll " #define __SC "sc " -#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x)) +#define cpu_to_lelongp(x) cpu_to_le32p((__u32 *) (x)) #elif (_MIPS_SZLONG == 64) #define SZLONG_LOG 6 #define SZLONG_MASK 63UL #define __LL "lld " #define __SC "scd " -#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x)) +#define cpu_to_lelongp(x) cpu_to_le64p((__u64 *) (x)) #endif #ifdef __KERNEL__ diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h index ae3e2a38fd5f..a438548e6ef3 100644 --- a/include/asm-mips/ddb5xxx/ddb5477.h +++ b/include/asm-mips/ddb5xxx/ddb5477.h @@ -247,7 +247,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); * All PCI irq but INTC are active low. */ -/* +/* * irq number block assignment */ @@ -285,7 +285,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); #define VRC5477_IRQ_IOPCI_INTB (17 + VRC5477_IRQ_BASE) /* USB-P */ #define VRC5477_IRQ_IOPCI_INTC (18 + VRC5477_IRQ_BASE) /* AC97 */ #define VRC5477_IRQ_IOPCI_INTD (19 + VRC5477_IRQ_BASE) /* Reserved */ -#define VRC5477_IRQ_UART1 (20 + VRC5477_IRQ_BASE) +#define VRC5477_IRQ_UART1 (20 + VRC5477_IRQ_BASE) #define VRC5477_IRQ_SPT0 (21 + VRC5477_IRQ_BASE) /* special purpose timer 0 */ #define VRC5477_IRQ_GPT0 (22 + VRC5477_IRQ_BASE) /* general purpose timer 0 */ #define VRC5477_IRQ_GPT1 (23 + VRC5477_IRQ_BASE) /* general purpose timer 1 */ @@ -301,7 +301,7 @@ extern void ll_vrc5477_irq_disable(int vrc5477_irq); /* * i2859 irq assignment */ -#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE) +#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE) #define I8259_IRQ_KEYBOARD (1 + I8259_IRQ_BASE) /* M1543 default */ #define I8259_IRQ_CASCADE (2 + I8259_IRQ_BASE) #define I8259_IRQ_UART_B (3 + I8259_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */ diff --git a/include/asm-mips/fpregdef.h b/include/asm-mips/fpregdef.h index 1d9aa0979181..2b5fddc8f487 100644 --- a/include/asm-mips/fpregdef.h +++ b/include/asm-mips/fpregdef.h @@ -13,7 +13,7 @@ #define _ASM_FPREGDEF_H #include <asm/sgidefs.h> - + #if _MIPS_SIM == _MIPS_SIM_ABI32 /* @@ -56,7 +56,7 @@ #define fcr31 $31 /* FPU status register */ #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - + #if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 #define fv0 $f0 /* return value */ diff --git a/include/asm-mips/fpu.h b/include/asm-mips/fpu.h index 6cb38d5c0407..ea24e733b1bc 100644 --- a/include/asm-mips/fpu.h +++ b/include/asm-mips/fpu.h @@ -82,7 +82,7 @@ do { \ static inline int is_fpu_owner(void) { - return cpu_has_fpu && test_thread_flag(TIF_USEDFPU); + return cpu_has_fpu && test_thread_flag(TIF_USEDFPU); } static inline void own_fpu(void) @@ -90,7 +90,7 @@ static inline void own_fpu(void) if (cpu_has_fpu) { __enable_fpu(); KSTK_STATUS(current) |= ST0_CU1; - set_thread_flag(TIF_USEDFPU); + set_thread_flag(TIF_USEDFPU); } } @@ -98,7 +98,7 @@ static inline void lose_fpu(void) { if (cpu_has_fpu) { KSTK_STATUS(current) &= ~ST0_CU1; - clear_thread_flag(TIF_USEDFPU); + clear_thread_flag(TIF_USEDFPU); __disable_fpu(); } } @@ -127,7 +127,7 @@ static inline void restore_fp(struct task_struct *tsk) static inline fpureg_t *get_fpu_regs(struct task_struct *tsk) { if (cpu_has_fpu) { - if ((tsk == current) && is_fpu_owner()) + if ((tsk == current) && is_fpu_owner()) _save_fp(current); return tsk->thread.fpu.hard.fpr; } diff --git a/include/asm-mips/ip32/mace.h b/include/asm-mips/ip32/mace.h index 2b7b0fdeac19..432011b16c26 100644 --- a/include/asm-mips/ip32/mace.h +++ b/include/asm-mips/ip32/mace.h @@ -94,7 +94,7 @@ struct mace_video { unsigned long xxx; /* later... */ }; -/* +/* * Ethernet interface */ struct mace_ethernet { @@ -129,7 +129,7 @@ struct mace_ethernet { volatile unsigned long rx_fifo; }; -/* +/* * Peripherals */ @@ -251,7 +251,7 @@ struct mace_timers { timer_reg audio_out2; timer_reg video_in1; timer_reg video_in2; - timer_reg video_out; + timer_reg video_out; }; struct mace_perif { @@ -272,7 +272,7 @@ struct mace_perif { }; -/* +/* * ISA peripherals */ diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h index 21d0fb7cee64..9e88c7669c7a 100644 --- a/include/asm-mips/lasat/serial.h +++ b/include/asm-mips/lasat/serial.h @@ -1,13 +1,13 @@ #include <asm/lasat/lasat.h> /* Lasat 100 boards serial configuration */ -#define LASAT_BASE_BAUD_100 ( 7372800 / 16 ) +#define LASAT_BASE_BAUD_100 ( 7372800 / 16 ) #define LASAT_UART_REGS_BASE_100 0x1c8b0000 #define LASAT_UART_REGS_SHIFT_100 2 #define LASATINT_UART_100 8 /* * LASAT 200 boards serial configuration */ -#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) +#define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) #define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) #define LASAT_UART_REGS_SHIFT_200 3 #define LASATINT_UART_200 13 diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 2b36ea346910..148bae2fa7d3 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1383,7 +1383,7 @@ extern au1xxx_irq_map_t au1xxx_irq_map[]; #define PCI_IO_START 0 #define PCI_IO_END 0 #define PCI_MEM_START 0 -#define PCI_MEM_END 0 +#define PCI_MEM_END 0 #define PCI_FIRST_DEVFN 0 #define PCI_LAST_DEVFN 0 #endif diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h index 4691398a414f..efafe65258b6 100644 --- a/include/asm-mips/mach-db1x00/db1x00.h +++ b/include/asm-mips/mach-db1x00/db1x00.h @@ -23,7 +23,7 @@ * * ######################################################################## * - * + * */ #ifndef __ASM_DB1X00_H #define __ASM_DB1X00_H diff --git a/include/asm-mips/mach-jazz/floppy.h b/include/asm-mips/mach-jazz/floppy.h index 8cf0d042c864..c9dad99b1232 100644 --- a/include/asm-mips/mach-jazz/floppy.h +++ b/include/asm-mips/mach-jazz/floppy.h @@ -92,7 +92,7 @@ static inline int fd_request_irq(void) return request_irq(FLOPPY_IRQ, floppy_interrupt, SA_INTERRUPT | SA_SAMPLE_RANDOM, "floppy", NULL); } - + static inline void fd_free_irq(void) { free_irq(FLOPPY_IRQ, NULL); diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h index d6c779747b3c..ff6d40c87a25 100644 --- a/include/asm-mips/mach-pb1x00/pb1500.h +++ b/include/asm-mips/mach-pb1x00/pb1500.h @@ -33,11 +33,11 @@ #define PCI_BOARD_REG 0xAE000010 #define PCMCIA_BOARD_REG 0xAE000010 #define PC_DEASSERT_RST 0x80 - #define PC_DRV_EN 0x10 + #define PC_DRV_EN 0x10 #define PB1500_G_CONTROL 0xAE000014 #define PB1500_RST_VDDI 0xAE00001C #define PB1500_LEDS 0xAE000018 - + #define PB1500_HEX_LED 0xAF000004 #define PB1500_HEX_LED_BLANK 0xAF000008 diff --git a/include/asm-mips/r4kcache.h b/include/asm-mips/r4kcache.h index da03a32c1ca7..5bea49feec66 100644 --- a/include/asm-mips/r4kcache.h +++ b/include/asm-mips/r4kcache.h @@ -171,11 +171,11 @@ static inline void blast_dcache16(void) unsigned long start = INDEX_BASE; unsigned long end = start + current_cpu_data.dcache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; - unsigned long ws_end = current_cpu_data.dcache.ways << + unsigned long ws_end = current_cpu_data.dcache.ways << current_cpu_data.dcache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) + for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Writeback_Inv_D); } @@ -200,8 +200,8 @@ static inline void blast_dcache16_page_indexed(unsigned long page) current_cpu_data.dcache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x200) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Writeback_Inv_D); } @@ -214,8 +214,8 @@ static inline void blast_icache16(void) current_cpu_data.icache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x200) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Invalidate_I); } @@ -239,8 +239,8 @@ static inline void blast_icache16_page_indexed(unsigned long page) current_cpu_data.icache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x200) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Invalidate_I); } @@ -249,11 +249,11 @@ static inline void blast_scache16(void) unsigned long start = INDEX_BASE; unsigned long end = start + current_cpu_data.scache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit; - unsigned long ws_end = current_cpu_data.scache.ways << + unsigned long ws_end = current_cpu_data.scache.ways << current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) + for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -278,8 +278,8 @@ static inline void blast_scache16_page_indexed(unsigned long page) current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x200) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x200) cache16_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -318,8 +318,8 @@ static inline void blast_dcache32(void) current_cpu_data.dcache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Writeback_Inv_D); } @@ -343,8 +343,8 @@ static inline void blast_dcache32_page_indexed(unsigned long page) current_cpu_data.dcache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Writeback_Inv_D); } @@ -357,8 +357,8 @@ static inline void blast_icache32(void) current_cpu_data.icache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Invalidate_I); } @@ -383,7 +383,7 @@ static inline void blast_icache32_page_indexed(unsigned long page) unsigned long ws, addr; for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400) + for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Invalidate_I); } @@ -392,11 +392,11 @@ static inline void blast_scache32(void) unsigned long start = INDEX_BASE; unsigned long end = start + current_cpu_data.scache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit; - unsigned long ws_end = current_cpu_data.scache.ways << + unsigned long ws_end = current_cpu_data.scache.ways << current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) + for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -421,8 +421,8 @@ static inline void blast_scache32_page_indexed(unsigned long page) current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x400) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x400) cache32_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -461,8 +461,8 @@ static inline void blast_icache64(void) current_cpu_data.icache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x800) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x800) cache64_unroll32(addr|ws,Index_Invalidate_I); } @@ -487,7 +487,7 @@ static inline void blast_icache64_page_indexed(unsigned long page) unsigned long ws, addr; for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x800) + for (addr = start; addr < end; addr += 0x800) cache64_unroll32(addr|ws,Index_Invalidate_I); } @@ -496,11 +496,11 @@ static inline void blast_scache64(void) unsigned long start = INDEX_BASE; unsigned long end = start + current_cpu_data.scache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit; - unsigned long ws_end = current_cpu_data.scache.ways << + unsigned long ws_end = current_cpu_data.scache.ways << current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) + for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x800) cache64_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -525,8 +525,8 @@ static inline void blast_scache64_page_indexed(unsigned long page) current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x800) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x800) cache64_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -561,11 +561,11 @@ static inline void blast_scache128(void) unsigned long start = INDEX_BASE; unsigned long end = start + current_cpu_data.scache.waysize; unsigned long ws_inc = 1UL << current_cpu_data.scache.waybit; - unsigned long ws_end = current_cpu_data.scache.ways << + unsigned long ws_end = current_cpu_data.scache.ways << current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) + for (ws = 0; ws < ws_end; ws += ws_inc) for (addr = start; addr < end; addr += 0x1000) cache128_unroll32(addr|ws,Index_Writeback_Inv_SD); } @@ -590,8 +590,8 @@ static inline void blast_scache128_page_indexed(unsigned long page) current_cpu_data.scache.waybit; unsigned long ws, addr; - for (ws = 0; ws < ws_end; ws += ws_inc) - for (addr = start; addr < end; addr += 0x1000) + for (ws = 0; ws < ws_end; ws += ws_inc) + for (addr = start; addr < end; addr += 0x1000) cache128_unroll32(addr|ws,Index_Writeback_Inv_SD); } diff --git a/include/asm-mips/rtc.h b/include/asm-mips/rtc.h index 31c0c2347f4f..3c4b637fd925 100644 --- a/include/asm-mips/rtc.h +++ b/include/asm-mips/rtc.h @@ -1,5 +1,5 @@ /* - * include/asm-mips/rtc.h + * include/asm-mips/rtc.h * * (Really an interface for drivers/char/genrtc.c) * diff --git a/include/asm-mips/sgi/gio.h b/include/asm-mips/sgi/gio.h index a38d66f99872..889cf028c95d 100644 --- a/include/asm-mips/sgi/gio.h +++ b/include/asm-mips/sgi/gio.h @@ -16,7 +16,7 @@ * * The Indigo and Indy have two GIO bus connectors. Indigo2 (all models) have * three physical connectors, but only two slots, GFX and EXP0. - * + * * There is 10MB of GIO address space for GIO64 slot devices * slot# slot type address range size * ----- --------- ----------------------- ----- diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h index a5b988d7327a..ac3dfc7af5b0 100644 --- a/include/asm-mips/sgi/hpc3.h +++ b/include/asm-mips/sgi/hpc3.h @@ -221,7 +221,7 @@ struct hpc3_regs { #define HPC3_BESTAT_PIDMASK 0x3f700 /* DMA channel parity identifier */ u32 _unused1[0x14000/4 - 5]; /* padding */ - + /* Now direct PIO per-HPC3 peripheral access to external regs. */ volatile u32 scsi0_ext[256]; /* SCSI channel 0 external regs */ u32 _unused2[0x7c00/4]; @@ -304,7 +304,7 @@ struct hpc3_regs { volatile u32 bbram[8192-50-14]; /* Battery backed ram */ }; -/* +/* * It is possible to have two HPC3's within the address space on * one machine, though only having one is more likely on an Indy. */ diff --git a/include/asm-mips/sgi/ioc.h b/include/asm-mips/sgi/ioc.h index 169187f53fbc..f3e3dc9bb732 100644 --- a/include/asm-mips/sgi/ioc.h +++ b/include/asm-mips/sgi/ioc.h @@ -16,7 +16,7 @@ #include <linux/types.h> #include <asm/sgi/pi1.h> -/* +/* * All registers are 8-bit wide alligned on 32-bit boundary. Bad things * happen if you try word access them. You have been warned. */ @@ -138,7 +138,7 @@ struct sgioc_regs { u8 _sysid[3]; volatile u8 sysid; #define SGIOC_SYSID_FULLHOUSE 0x01 -#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5) +#define SGIOC_SYSID_BOARDREV(x) ((x & 0xe0) > 5) #define SGIOC_SYSID_CHIPREV(x) ((x & 0x1e) > 1) u32 _unused2; u8 _read[3]; diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h index 97d73adb4e40..bbfc05c3cab9 100644 --- a/include/asm-mips/sgi/ip22.h +++ b/include/asm-mips/sgi/ip22.h @@ -12,7 +12,7 @@ #ifndef _SGI_IP22_H #define _SGI_IP22_H -/* +/* * These are the virtual IRQ numbers, we divide all IRQ's into * 'spaces', the 'space' determines where and how to enable/disable * that particular IRQ on an SGI machine. HPC DMA and MC DMA interrups diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h index fd98f930607c..c52f7834c7c8 100644 --- a/include/asm-mips/sgi/mc.h +++ b/include/asm-mips/sgi/mc.h @@ -182,14 +182,14 @@ struct sgimc_regs { volatile u32 dtlb_hi3; u32 _unused33; volatile u32 dtlb_lo3; - + u32 _unused34[0x0392]; - + u32 _unused35; volatile u32 rpsscounter; /* Chirps at 100ns */ u32 _unused36[0x1000/4-2*4]; - + u32 _unused37; volatile u32 maddronly; /* Address DMA goes at */ u32 _unused38; diff --git a/include/asm-mips/sibyte/carmel.h b/include/asm-mips/sibyte/carmel.h index 7ac5da13ce8a..b5e7dae19f0f 100644 --- a/include/asm-mips/sibyte/carmel.h +++ b/include/asm-mips/sibyte/carmel.h @@ -25,12 +25,12 @@ #define SIBYTE_BOARD_NAME "Carmel" -#define GPIO_PHY_INTERRUPT 2 -#define GPIO_NONMASKABLE_INT 3 -#define GPIO_CF_INSERTED 6 -#define GPIO_MONTEREY_RESET 7 -#define GPIO_QUADUART_INT 8 -#define GPIO_CF_INT 9 +#define GPIO_PHY_INTERRUPT 2 +#define GPIO_NONMASKABLE_INT 3 +#define GPIO_CF_INSERTED 6 +#define GPIO_MONTEREY_RESET 7 +#define GPIO_QUADUART_INT 8 +#define GPIO_CF_INT 9 #define GPIO_FPGA_CCLK 10 #define GPIO_FPGA_DOUT 11 #define GPIO_FPGA_DIN 12 diff --git a/include/asm-mips/sibyte/sb1250_defs.h b/include/asm-mips/sibyte/sb1250_defs.h index 96088fb074a4..40ef97c76c8b 100644 --- a/include/asm-mips/sibyte/sb1250_defs.h +++ b/include/asm-mips/sibyte/sb1250_defs.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * - * Global constants and macros File: sb1250_defs.h - * + * + * Global constants and macros File: sb1250_defs.h + * * This file contains macros and definitions used by the other * include files. * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -105,7 +105,7 @@ #define SIBYTE_HDR_FMASK_112x_ALL 0x0000f00 #define SIBYTE_HDR_FMASK_112x_PASS1 0x0000100 -/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ +/* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ #define SIBYTE_HDR_FMASK(chip, pass) \ (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) #define SIBYTE_HDR_FMASK_ALLREVS(chip) \ @@ -150,31 +150,31 @@ /* ********************************************************************* * Naming schemes for constants in these files: - * - * M_xxx MASK constant (identifies bits in a register). + * + * M_xxx MASK constant (identifies bits in a register). * For multi-bit fields, all bits in the field will * be set. * * K_xxx "Code" constant (value for data in a multi-bit * field). The value is right justified. * - * V_xxx "Value" constant. This is the same as the + * V_xxx "Value" constant. This is the same as the * corresponding "K_xxx" constant, except it is * shifted to the correct position in the register. * * S_xxx SHIFT constant. This is the number of bits that - * a field value (code) needs to be shifted + * a field value (code) needs to be shifted * (towards the left) to put the value in the right * position for the register. * - * A_xxx ADDRESS constant. This will be a physical + * A_xxx ADDRESS constant. This will be a physical * address. Use the PHYS_TO_K1 macro to generate * a K1SEG address. * * R_xxx RELATIVE offset constant. This is an offset from * an A_xxx constant (usually the first register in * a group). - * + * * G_xxx(X) GET value. This macro obtains a multi-bit field * from a register, masks it, and shifts it to * the bottom of the register (retrieving a K_xxx @@ -189,7 +189,7 @@ /* - * Cast to 64-bit number. Presumably the syntax is different in + * Cast to 64-bit number. Presumably the syntax is different in * assembly language. * * Note: you'll need to define uint32_t and uint64_t in your headers. diff --git a/include/asm-mips/sibyte/sb1250_dma.h b/include/asm-mips/sibyte/sb1250_dma.h index f1b08d32338d..3cdb48f50ed0 100644 --- a/include/asm-mips/sibyte/sb1250_dma.h +++ b/include/asm-mips/sibyte/sb1250_dma.h @@ -1,24 +1,24 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * DMA definitions File: sb1250_dma.h - * + * * This module contains constants and macros useful for * programming the SB1250's DMA controllers, both the data mover * and the Ethernet DMA. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -28,7 +28,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -43,9 +43,9 @@ * DMA Registers ********************************************************************* */ -/* +/* * Ethernet and Serial DMA Configuration Register 0 (Table 7-4) - * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG0_MAC_x_RX_CH_0 * Registers: DMA_CONFIG0_MAC_x_TX_CH_0 * Registers: DMA_CONFIG0_SER_x_RX * Registers: DMA_CONFIG0_SER_x_TX @@ -98,7 +98,7 @@ /* * Ethernet and Serial DMA Configuration Register 1 (Table 7-5) - * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 + * Registers: DMA_CONFIG1_MAC_x_RX_CH_0 * Registers: DMA_CONFIG1_DMA_x_TX_CH_0 * Registers: DMA_CONFIG1_SER_x_RX * Registers: DMA_CONFIG1_SER_x_TX @@ -152,11 +152,11 @@ /* * DMA Descriptor Count Registers (Table 7-8) */ - + /* No bitfields */ -/* +/* * Current Descriptor Address Register (Table 7-11) */ @@ -275,14 +275,14 @@ #define V_DMA_DSCRB_STATUS(x) _SB_MAKEVALUE(x,S_DMA_DSCRB_STATUS) #define G_DMA_DSCRB_STATUS(x) _SB_GETVALUE(x,S_DMA_DSCRB_STATUS,M_DMA_DSCRB_STATUS) -/* +/* * Ethernet Descriptor Status Bits (Table 7-15) */ #define M_DMA_ETHRX_BADIP4CS _SB_MAKEMASK1(51) #define M_DMA_ETHRX_DSCRERR _SB_MAKEMASK1(52) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) /* Note: BADTCPCS is actually in DSCR_B options field */ #define M_DMA_ETHRX_BADTCPCS _SB_MAKEMASK1(0) #endif /* 1250 PASS2 || 112x PASS1 */ @@ -324,7 +324,7 @@ #define M_DMA_ETHTX_SOP _SB_MAKEMASK1(63) -/* +/* * Ethernet Transmit Options (Table 7-17) */ @@ -377,7 +377,7 @@ * Data Mover Registers ********************************************************************* */ -/* +/* * Data Mover Descriptor Base Address Register (Table 7-22) * Register: DM_DSCR_BASE_0 * Register: DM_DSCR_BASE_1 @@ -414,7 +414,7 @@ #define M_DM_DSCR_BASE_ABORT _SB_MAKEMASK1(62) #define M_DM_DSCR_BASE_ENABL _SB_MAKEMASK1(63) -/* +/* * Data Mover Descriptor Count Register (Table 7-25) */ diff --git a/include/asm-mips/sibyte/sb1250_genbus.h b/include/asm-mips/sibyte/sb1250_genbus.h index 0d9dfac3d7db..f1f509f295c4 100644 --- a/include/asm-mips/sibyte/sb1250_genbus.h +++ b/include/asm-mips/sibyte/sb1250_genbus.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * Generic Bus Constants File: sb1250_genbus.h - * - * This module contains constants and macros useful for + * + * This module contains constants and macros useful for * manipulating the SB1250's Generic Bus interface - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h index c3f74df211f4..e173e2ea4c98 100644 --- a/include/asm-mips/sibyte/sb1250_int.h +++ b/include/asm-mips/sibyte/sb1250_int.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * Interrupt Mapper definitions File: sb1250_int.h - * + * * This module contains constants for manipulating the SB1250's * interrupt mapper and definitions for the interrupt sources. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -43,7 +43,7 @@ /* * Interrupt sources (Table 4-8, UM 0.2) - * + * * First, the interrupt numbers. */ diff --git a/include/asm-mips/sibyte/sb1250_l2c.h b/include/asm-mips/sibyte/sb1250_l2c.h index 799db828d963..8afe8e01581b 100644 --- a/include/asm-mips/sibyte/sb1250_l2c.h +++ b/include/asm-mips/sibyte/sb1250_l2c.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * L2 Cache constants and macros File: sb1250_l2c.h - * + * * This module contains constants useful for manipulating the * level 2 cache. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_ldt.h b/include/asm-mips/sibyte/sb1250_ldt.h index d8753885df17..f2617ded0a8f 100644 --- a/include/asm-mips/sibyte/sb1250_ldt.h +++ b/include/asm-mips/sibyte/sb1250_ldt.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * LDT constants File: sb1250_ldt.h - * - * This module contains constants and macros to describe - * the LDT interface on the SB1250. - * + * + * This module contains constants and macros to describe + * the LDT interface on the SB1250. + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -155,7 +155,7 @@ /* * LDT Status Register (Table 8-14). Note that these constants - * assume you've read the command and status register + * assume you've read the command and status register * together (32-bit read at offset 0x04) * * These bits also apply to the secondary status @@ -183,8 +183,8 @@ #define M_LDT_STATUS_DETPARERR _SB_MAKEMASK1_32(31) /* - * Bridge Control Register (Table 8-16). Note that these - * constants assume you've read the register as a 32-bit + * Bridge Control Register (Table 8-16). Note that these + * constants assume you've read the register as a 32-bit * read (offset 0x3C) */ diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h index 81f603f03a98..18e74e43f4a2 100644 --- a/include/asm-mips/sibyte/sb1250_mac.h +++ b/include/asm-mips/sibyte/sb1250_mac.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * MAC constants and macros File: sb1250_mac.h - * + * * This module contains constants and macros for the SB1250's * ethernet controllers. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -311,7 +311,7 @@ /* * These constants are used to configure the fields within the Frame - * Configuration Register. + * Configuration Register. */ #define K_MAC_IFG_RX_10 _SB_MAKE64(0) /* See table 176, not used */ @@ -393,7 +393,7 @@ * Register: MAC_INT_MASK_2 */ -/* +/* * Use these constants to shift the appropriate channel * into the CH0 position so the same tests can be used * on each channel. diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h index 93a48334b874..1dd41c927996 100644 --- a/include/asm-mips/sibyte/sb1250_mc.h +++ b/include/asm-mips/sibyte/sb1250_mc.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * - * Memory Controller constants File: sb1250_mc.h - * + * + * Memory Controller constants File: sb1250_mc.h + * * This module contains constants and macros useful for * programming the memory controller. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -166,7 +166,7 @@ #define K_MC_REF_RATE_100MHz 0x62 #define K_MC_REF_RATE_133MHz 0x81 -#define K_MC_REF_RATE_200MHz 0xC4 +#define K_MC_REF_RATE_200MHz 0xC4 #define V_MC_REF_RATE_100MHz V_MC_REF_RATE(K_MC_REF_RATE_100MHz) #define V_MC_REF_RATE_133MHz V_MC_REF_RATE(K_MC_REF_RATE_133MHz) @@ -228,7 +228,7 @@ V_MC_ADDR_DRIVE_DEFAULT | \ V_MC_DATA_DRIVE_DEFAULT | \ V_MC_CLOCK_DRIVE_DEFAULT | \ - V_MC_REF_RATE_DEFAULT + V_MC_REF_RATE_DEFAULT diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h index 5d496c6faba6..9db80cd13a79 100644 --- a/include/asm-mips/sibyte/sb1250_regs.h +++ b/include/asm-mips/sibyte/sb1250_regs.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * Register Definitions File: sb1250_regs.h - * + * * This module contains the addresses of the on-chip peripherals * on the SB1250. - * + * * SB1250 specification level: 01/02/2002 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -40,20 +40,20 @@ /* ********************************************************************* * Some general notes: - * + * * For the most part, when there is more than one peripheral * of the same type on the SOC, the constants below will be * offsets from the base of each peripheral. For example, * the MAC registers are described as offsets from the first * MAC register, and there will be a MAC_REGISTER() macro - * to calculate the base address of a given MAC. - * + * to calculate the base address of a given MAC. + * * The information in this file is based on the SB1250 SOC * manual version 0.2, July 2000. ********************************************************************* */ -/* ********************************************************************* +/* ********************************************************************* * Memory Controller Registers ********************************************************************* */ @@ -101,7 +101,7 @@ #define R_MC_TEST_ECC 0x0000000420 #define R_MC_MCLK_CFG 0x0000000500 -/* ********************************************************************* +/* ********************************************************************* * L2 Cache Control Registers ********************************************************************* */ @@ -126,7 +126,7 @@ #define A_L2_EEC_ADDRESS A_L2_ECC_TAG -/* ********************************************************************* +/* ********************************************************************* * PCI Interface Registers ********************************************************************* */ @@ -134,7 +134,7 @@ #define A_PCI_TYPE01_HEADER 0x00DE000800 -/* ********************************************************************* +/* ********************************************************************* * Ethernet DMA and MACs ********************************************************************* */ @@ -184,7 +184,7 @@ (R_MAC_DMA_CHANNEL_BASE(txrx,chan) + \ (reg)) -/* +/* * DMA channel registers, relative to A_MAC_DMA_CHANNEL_BASE */ @@ -259,7 +259,7 @@ #define MAC_CHMAP_COUNT 4 -/* ********************************************************************* +/* ********************************************************************* * DUART Registers ********************************************************************* */ @@ -363,7 +363,7 @@ #endif /* 1250 PASS2 || 112x PASS1 */ -/* ********************************************************************* +/* ********************************************************************* * Synchronous Serial Registers ********************************************************************* */ @@ -397,7 +397,7 @@ (reg)) -/* +/* * DMA channel registers, relative to A_SER_DMA_CHANNEL_BASE */ @@ -457,7 +457,7 @@ #define R_SER_RMON_RX_ERRORS 0x000001F0 #define R_SER_RMON_RX_BADADDR 0x000001F8 -/* ********************************************************************* +/* ********************************************************************* * Generic Bus Registers ********************************************************************* */ @@ -513,7 +513,7 @@ #define R_IO_PCMCIA_CFG 0x0A60 #define R_IO_PCMCIA_STATUS 0x0A70 -/* ********************************************************************* +/* ********************************************************************* * GPIO Registers ********************************************************************* */ @@ -537,7 +537,7 @@ #define R_GPIO_PIN_CLR 0x30 #define R_GPIO_PIN_SET 0x38 -/* ********************************************************************* +/* ********************************************************************* * SMBus Registers ********************************************************************* */ @@ -573,7 +573,7 @@ #define R_SMB_CONTROL 0x0000000060 #define R_SMB_PEC 0x0000000070 -/* ********************************************************************* +/* ********************************************************************* * Timer Registers ********************************************************************* */ @@ -641,7 +641,7 @@ #endif /* 1250 PASS2 || 112x PASS1 */ -/* ********************************************************************* +/* ********************************************************************* * System Control Registers ********************************************************************* */ @@ -649,7 +649,7 @@ #define A_SCD_SYSTEM_CFG 0x0010020008 #define A_SCD_SYSTEM_MANUF 0x0010038000 -/* ********************************************************************* +/* ********************************************************************* * System Address Trap Registers ********************************************************************* */ @@ -672,7 +672,7 @@ #endif /* 1250 PASS2 || 112x PASS1 */ -/* ********************************************************************* +/* ********************************************************************* * System Interrupt Mapper Registers ********************************************************************* */ @@ -701,7 +701,7 @@ #define R_IMR_INTERRUPT_MAP_BASE 0x0200 #define R_IMR_INTERRUPT_MAP_COUNT 64 -/* ********************************************************************* +/* ********************************************************************* * System Performance Counter Registers ********************************************************************* */ @@ -711,7 +711,7 @@ #define A_SCD_PERF_CNT_2 0x00100204E0 #define A_SCD_PERF_CNT_3 0x00100204E8 -/* ********************************************************************* +/* ********************************************************************* * System Bus Watcher Registers ********************************************************************* */ @@ -726,13 +726,13 @@ #define A_BUS_L2_ERRORS 0x00100208C0 #define A_BUS_MEM_IO_ERRORS 0x00100208C8 -/* ********************************************************************* +/* ********************************************************************* * System Debug Controller Registers ********************************************************************* */ #define A_SCD_JTAG_BASE 0x0010000000 -/* ********************************************************************* +/* ********************************************************************* * System Trace Buffer Registers ********************************************************************* */ @@ -755,7 +755,7 @@ #define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 #define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 -/* ********************************************************************* +/* ********************************************************************* * System Generic DMA Registers ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h index 22e8041959e2..dbbd682fb47e 100644 --- a/include/asm-mips/sibyte/sb1250_scd.h +++ b/include/asm-mips/sibyte/sb1250_scd.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * SCD Constants and Macros File: sb1250_scd.h - * + * * This module contains constants and macros useful for * manipulating the System Control and Debug module on the 1250. - * + * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -130,40 +130,40 @@ /* System Manufacturing Register * Register: SCD_SYSTEM_MANUF */ - + /* Wafer ID: bits 31:0 */ #define S_SYS_WAFERID1_200 _SB_MAKE64(0) #define M_SYS_WAFERID1_200 _SB_MAKEMASK(32,S_SYS_WAFERID1_200) #define V_SYS_WAFERID1_200(x) _SB_MAKEVALUE(x,S_SYS_WAFERID1_200) #define G_SYS_WAFERID1_200(x) _SB_GETVALUE(x,S_SYS_WAFERID1_200,M_SYS_WAFERID1_200) - + #define S_SYS_BIN _SB_MAKE64(32) #define M_SYS_BIN _SB_MAKEMASK(4,S_SYS_BIN) #define V_SYS_BIN _SB_MAKEVALUE(x,S_SYS_BIN) #define G_SYS_BIN _SB_GETVALUE(x,S_SYS_BIN,M_SYS_BIN) - + /* Wafer ID: bits 39:36 */ #define S_SYS_WAFERID2_200 _SB_MAKE64(36) #define M_SYS_WAFERID2_200 _SB_MAKEMASK(4,S_SYS_WAFERID2_200) #define V_SYS_WAFERID2_200(x) _SB_MAKEVALUE(x,S_SYS_WAFERID2_200) #define G_SYS_WAFERID2_200(x) _SB_GETVALUE(x,S_SYS_WAFERID2_200,M_SYS_WAFERID2_200) - + /* Wafer ID: bits 39:0 */ #define S_SYS_WAFERID_300 _SB_MAKE64(0) #define M_SYS_WAFERID_300 _SB_MAKEMASK(40,S_SYS_WAFERID_300) #define V_SYS_WAFERID_300(x) _SB_MAKEVALUE(x,S_SYS_WAFERID_300) #define G_SYS_WAFERID_300(x) _SB_GETVALUE(x,S_SYS_WAFERID_300,M_SYS_WAFERID_300) - + #define S_SYS_XPOS _SB_MAKE64(40) #define M_SYS_XPOS _SB_MAKEMASK(6,S_SYS_XPOS) #define V_SYS_XPOS(x) _SB_MAKEVALUE(x,S_SYS_XPOS) #define G_SYS_XPOS(x) _SB_GETVALUE(x,S_SYS_XPOS,M_SYS_XPOS) - + #define S_SYS_YPOS _SB_MAKE64(46) #define M_SYS_YPOS _SB_MAKEMASK(6,S_SYS_YPOS) #define V_SYS_YPOS(x) _SB_MAKEVALUE(x,S_SYS_YPOS) #define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS) - + /* * System Config Register (Table 4-2) * Register: SCD_SYSTEM_CFG diff --git a/include/asm-mips/sibyte/sb1250_smbus.h b/include/asm-mips/sibyte/sb1250_smbus.h index 287cbfe9efa2..335c53e92936 100644 --- a/include/asm-mips/sibyte/sb1250_smbus.h +++ b/include/asm-mips/sibyte/sb1250_smbus.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * SMBUS Constants File: sb1250_smbus.h - * - * This module contains constants and macros useful for + * + * This module contains constants and macros useful for * manipulating the SB1250's SMbus devices. - * + * * SB1250 specification level: 01/02/2002 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_syncser.h b/include/asm-mips/sibyte/sb1250_syncser.h index 8d5e8edd3c4b..fa2760d38b8b 100644 --- a/include/asm-mips/sibyte/sb1250_syncser.h +++ b/include/asm-mips/sibyte/sb1250_syncser.h @@ -7,17 +7,17 @@ * manipulating the SB1250's Synchronous Serial * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg * ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_uart.h b/include/asm-mips/sibyte/sb1250_uart.h index 7655d6945cca..923ea4f44e0f 100644 --- a/include/asm-mips/sibyte/sb1250_uart.h +++ b/include/asm-mips/sibyte/sb1250_uart.h @@ -1,23 +1,23 @@ /* ********************************************************************* * SB1250 Board Support Package - * + * * UART Constants File: sb1250_uart.h - * - * This module contains constants and macros useful for + * + * This module contains constants and macros useful for * manipulating the SB1250's UARTs * * SB1250 specification level: User's manual 1/02/02 - * + * * Author: Mitch Lichtenberg - * - ********************************************************************* + * + ********************************************************************* * * Copyright 2000,2001,2002,2003 * Broadcom Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, @@ -27,7 +27,7 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA ********************************************************************* */ @@ -37,7 +37,7 @@ #include "sb1250_defs.h" -/* ********************************************************************** +/* ********************************************************************** * DUART Registers ********************************************************************** */ @@ -145,7 +145,7 @@ #define V_DUART_MISC_CMD_START_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_START_BREAK) #define V_DUART_MISC_CMD_STOP_BREAK V_DUART_MISC_CMD(K_DUART_MISC_CMD_STOP_BREAK) -#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) +#define M_DUART_CMD_RESERVED _SB_MAKEMASK1(7) /* * DUART Status Register (Table 10-6) @@ -165,7 +165,7 @@ /* * DUART Baud Rate Register (Table 10-7) - * Register: DUART_CLK_SEL_A + * Register: DUART_CLK_SEL_A * Register: DUART_CLK_SEL_B */ @@ -332,7 +332,7 @@ (chan == 0 ? M_DUART_OUT_PIN_CLR0 : M_DUART_OUT_PIN_CLR1) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) -/* +/* * Full Interrupt Control Register */ diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h index 18939e84b6f2..f7fbebaa0744 100644 --- a/include/asm-mips/sigcontext.h +++ b/include/asm-mips/sigcontext.h @@ -10,7 +10,7 @@ #define _ASM_SIGCONTEXT_H #include <asm/sgidefs.h> - + #if _MIPS_SIM == _MIPS_SIM_ABI32 /* @@ -38,7 +38,7 @@ struct sigcontext { }; #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - + #if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 /* diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h index d478a86294ee..753b6620e6fa 100644 --- a/include/asm-mips/socket.h +++ b/include/asm-mips/socket.h @@ -82,7 +82,7 @@ To add: #define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */ * @SOCK_STREAM - stream (connection) socket * @SOCK_RAW - raw socket * @SOCK_RDM - reliably-delivered message - * @SOCK_SEQPACKET - sequential packet socket + * @SOCK_SEQPACKET - sequential packet socket * @SOCK_PACKET - linux specific way of getting packets at the dev level. * For writing rarp and other similar things on the user level. */ diff --git a/include/asm-mips/statfs.h b/include/asm-mips/statfs.h index 5076fec65780..c3ddf973c1c0 100644 --- a/include/asm-mips/statfs.h +++ b/include/asm-mips/statfs.h @@ -57,7 +57,7 @@ struct statfs64 { }; #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ - + #if _MIPS_SIM == _MIPS_SIM_ABI64 struct statfs64 { /* Same as struct statfs */ diff --git a/include/asm-mips/titan_dep.h b/include/asm-mips/titan_dep.h index fd9599e40a0a..fee1908c65d2 100644 --- a/include/asm-mips/titan_dep.h +++ b/include/asm-mips/titan_dep.h @@ -228,4 +228,4 @@ extern unsigned long ocd_base; #define RM9K_READ_8(ofs, val) *(val) = *(volatile u8 *)(RM9000x2_BASE_ADDR+ofs) #define RM9K_READ_16(ofs, val) *(val) = *(volatile u16 *)(RM9000x2_BASE_ADDR+ofs) -#endif +#endif diff --git a/include/asm-mips/tx4927/tx4927.h b/include/asm-mips/tx4927/tx4927.h index 5d939db6e220..3bb7f0087d68 100644 --- a/include/asm-mips/tx4927/tx4927.h +++ b/include/asm-mips/tx4927/tx4927.h @@ -45,14 +45,14 @@ /* TX4927 SDRAM controller (64-bit registers) */ -#define TX4927_SDRAMC_BASE 0x8000 -#define TX4927_SDRAMC_SDCCR0 0x8000 +#define TX4927_SDRAMC_BASE 0x8000 +#define TX4927_SDRAMC_SDCCR0 0x8000 #define TX4927_SDRAMC_SDCCR1 0x8008 #define TX4927_SDRAMC_SDCCR2 0x8010 #define TX4927_SDRAMC_SDCCR3 0x8018 #define TX4927_SDRAMC_SDCTR 0x8040 #define TX4927_SDRAMC_SDCMD 0x8058 -#define TX4927_SDRAMC_LIMIT 0x8fff +#define TX4927_SDRAMC_LIMIT 0x8fff /* TX4927 external bus controller (64-bit registers) */ @@ -289,8 +289,8 @@ /* TX4927 serial port 0 (32-bit registers) */ -#define TX4927_SIO0_BASE 0xf300 -#define TX4927_SIO0_SILCR0 0xf300 +#define TX4927_SIO0_BASE 0xf300 +#define TX4927_SIO0_SILCR0 0xf300 #define TX4927_SIO0_SILCR0_RESERVED_16_31 BM_16_31 #define TX4927_SIO0_SILCR0_RWUB BM_15_15 #define TX4927_SIO0_SILCR0_TWUB BM_14_14 @@ -309,7 +309,7 @@ #define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT (~BM_00_01) #define TX4927_SIO0_SILCR0_UMODE_DATA_8_BIT_MC BM_01_01 #define TX4927_SIO0_SILCR0_UMODE_DATA_7_BIT_MC BM_00_01 -#define TX4927_SIO0_SIDICR0 0xf304 +#define TX4927_SIO0_SIDICR0 0xf304 #define TX4927_SIO0_SIDICR0_RESERVED_16_31 BM_16_31 #define TX4927_SIO0_SIDICR0_TDE BM_15_15 #define TX4927_SIO0_SIDICR0_RDE BM_14_14 @@ -330,7 +330,7 @@ #define TX4927_SIO0_SIDICR0_STIE_TRDY BM_02_02 #define TX4927_SIO0_SIDICR0_STIE_TXALS BM_01_01 #define TX4927_SIO0_SIDICR0_STIE_UBRKD BM_00_00 -#define TX4927_SIO0_SIDISR0 0xf308 +#define TX4927_SIO0_SIDISR0 0xf308 #define TX4927_SIO0_SIDISR0_RESERVED_16_31 BM_16_31 #define TX4927_SIO0_SIDISR0_UBRK BM_15_15 #define TX4927_SIO0_SIDISR0_UVALID BM_14_14 @@ -344,7 +344,7 @@ #define TX4927_SIO0_SIDISR0_STIS BM_06_06 #define TX4927_SIO0_SIDISR0_RESERVED_05_05 BM_05_05 #define TX4927_SIO0_SIDISR0_RFDN BM_00_04 -#define TX4927_SIO0_SISCISR0 0xf30c +#define TX4927_SIO0_SISCISR0 0xf30c #define TX4927_SIO0_SISCISR0_RESERVED_06_31 BM_06_31 #define TX4927_SIO0_SISCISR0_OERS BM_05_05 #define TX4927_SIO0_SISCISR0_CTSS BM_04_04 @@ -352,7 +352,7 @@ #define TX4927_SIO0_SISCISR0_TRDY BM_02_02 #define TX4927_SIO0_SISCISR0_TXALS BM_01_01 #define TX4927_SIO0_SISCISR0_UBRKD BM_00_00 -#define TX4927_SIO0_SIFCR0 0xf310 +#define TX4927_SIO0_SIFCR0 0xf310 #define TX4927_SIO0_SIFCR0_RESERVED_16_31 BM_16_31 #define TX4927_SIO0_SIFCR0_SWRST BM_16_31 #define TX4927_SIO0_SIFCR0_RESERVED_09_14 BM_09_14 @@ -370,7 +370,7 @@ #define TX4927_SIO0_SIFCR0_TFRST BM_02_02 #define TX4927_SIO0_SIFCR0_RFRST BM_01_01 #define TX4927_SIO0_SIFCR0_FRSTE BM_00_00 -#define TX4927_SIO0_SIFLCR0 0xf314 +#define TX4927_SIO0_SIFLCR0 0xf314 #define TX4927_SIO0_SIFLCR0_RESERVED_13_31 BM_13_31 #define TX4927_SIO0_SIFLCR0_RCS BM_12_12 #define TX4927_SIO0_SIFLCR0_TES BM_11_11 @@ -381,7 +381,7 @@ #define TX4927_SIO0_SIFLCR0_RESERVED_05_06 BM_05_06 #define TX4927_SIO0_SIFLCR0_RTSTL BM_01_04 #define TX4927_SIO0_SIFLCR0_TBRK BM_00_00 -#define TX4927_SIO0_SIBGR0 0xf318 +#define TX4927_SIO0_SIBGR0 0xf318 #define TX4927_SIO0_SIBGR0_RESERVED_10_31 BM_10_31 #define TX4927_SIO0_SIBGR0_BCLK BM_08_09 #define TX4927_SIO0_SIBGR0_BCLK_T0 (~BM_08_09) @@ -389,28 +389,28 @@ #define TX4927_SIO0_SIBGR0_BCLK_T4 BM_09_09 #define TX4927_SIO0_SIBGR0_BCLK_T6 BM_08_09 #define TX4927_SIO0_SIBGR0_BRD BM_00_07 -#define TX4927_SIO0_SITFIF00 0xf31c +#define TX4927_SIO0_SITFIF00 0xf31c #define TX4927_SIO0_SITFIF00_RESERVED_08_31 BM_08_31 #define TX4927_SIO0_SITFIF00_TXD BM_00_07 -#define TX4927_SIO0_SIRFIFO0 0xf320 +#define TX4927_SIO0_SIRFIFO0 0xf320 #define TX4927_SIO0_SIRFIFO0_RESERVED_08_31 BM_08_31 #define TX4927_SIO0_SIRFIFO0_RXD BM_00_07 -#define TX4927_SIO0_SIRFIFO0 0xf320 -#define TX4927_SIO0_LIMIT 0xf3ff +#define TX4927_SIO0_SIRFIFO0 0xf320 +#define TX4927_SIO0_LIMIT 0xf3ff /* TX4927 serial port 1 (32-bit registers) */ -#define TX4927_SIO1_BASE 0xf400 -#define TX4927_SIO1_SILCR1 0xf400 -#define TX4927_SIO1_SIDICR1 0xf404 -#define TX4927_SIO1_SIDISR1 0xf408 -#define TX4927_SIO1_SISCISR1 0xf40c -#define TX4927_SIO1_SIFCR1 0xf410 -#define TX4927_SIO1_SIFLCR1 0xf414 -#define TX4927_SIO1_SIBGR1 0xf418 -#define TX4927_SIO1_SITFIF01 0xf41c -#define TX4927_SIO1_SIRFIFO1 0xf420 -#define TX4927_SIO1_LIMIT 0xf4ff +#define TX4927_SIO1_BASE 0xf400 +#define TX4927_SIO1_SILCR1 0xf400 +#define TX4927_SIO1_SIDICR1 0xf404 +#define TX4927_SIO1_SIDISR1 0xf408 +#define TX4927_SIO1_SISCISR1 0xf40c +#define TX4927_SIO1_SIFCR1 0xf410 +#define TX4927_SIO1_SIFLCR1 0xf414 +#define TX4927_SIO1_SIBGR1 0xf418 +#define TX4927_SIO1_SITFIF01 0xf41c +#define TX4927_SIO1_SIRFIFO1 0xf420 +#define TX4927_SIO1_LIMIT 0xf4ff /* TX4927 parallel port (32-bit registers) */ diff --git a/include/asm-mips/tx4927/tx4927_pci.h b/include/asm-mips/tx4927/tx4927_pci.h index 170433492246..165f6b8b217f 100644 --- a/include/asm-mips/tx4927/tx4927_pci.h +++ b/include/asm-mips/tx4927/tx4927_pci.h @@ -5,8 +5,8 @@ * * Copyright (C) 2000-2001 Toshiba Corporation */ -#ifndef __ASM_TX4927_TX4927_PCI_H -#define __ASM_TX4927_TX4927_PCI_H +#ifndef __ASM_TX4927_TX4927_PCI_H +#define __ASM_TX4927_TX4927_PCI_H #define TX4927_CCFG_TOE 0x00004000 diff --git a/include/asm-mips/vr41xx/vrc4173.h b/include/asm-mips/vr41xx/vrc4173.h index 58e193c51b45..bb7a85c186e4 100644 --- a/include/asm-mips/vr41xx/vrc4173.h +++ b/include/asm-mips/vr41xx/vrc4173.h @@ -21,8 +21,8 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#ifndef __NEC_VRC4173_H -#define __NEC_VRC4173_H +#ifndef __NEC_VRC4173_H +#define __NEC_VRC4173_H #include <linux/config.h> #include <asm/io.h> diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h index c4a704121343..04ee53b34c2e 100644 --- a/include/asm-mips/war.h +++ b/include/asm-mips/war.h @@ -113,7 +113,7 @@ */ #define BCM1250_M3_WAR 1 -/* +/* * This is a DUART workaround related to glitches around register accesses */ #define SIBYTE_1956_WAR 1 @@ -122,7 +122,7 @@ /* * Fill buffers not flushed on CACHE instructions - * + * * Hit_Invalidate_I cacheops invalidate an icache line but the refill * for that line can get stale data from the fill buffer instead of * accessing memory if the previous icache miss was also to that line. diff --git a/include/asm-mips/xxs1500.h b/include/asm-mips/xxs1500.h index 75c0ddfeca13..4d84a90b0f20 100644 --- a/include/asm-mips/xxs1500.h +++ b/include/asm-mips/xxs1500.h @@ -22,7 +22,7 @@ * * ######################################################################## * - * + * */ #ifndef __ASM_XXS1500_H #define __ASM_XXS1500_H |
