diff options
Diffstat (limited to 'include/asm-m68k/mac_psc.h')
| -rw-r--r-- | include/asm-m68k/mac_psc.h | 248 |
1 files changed, 0 insertions, 248 deletions
diff --git a/include/asm-m68k/mac_psc.h b/include/asm-m68k/mac_psc.h deleted file mode 100644 index 7808bb0b2323..000000000000 --- a/include/asm-m68k/mac_psc.h +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Apple Peripheral System Controller (PSC) - * - * The PSC is used on the AV Macs to control IO functions not handled - * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA - * channels. - * - * The first seven DMA channels appear to be "one-shot" and are actually - * sets of two channels; one member is active while the other is being - * configured, and then you flip the active member and start all over again. - * The one-shot channels are grouped together and are: - * - * 1. SCSI - * 2. Ethernet Read - * 3. Ethernet Write - * 4. Floppy Disk Controller - * 5. SCC Channel A Receive - * 6. SCC Channel B Receive - * 7. SCC Channel A Transmit - * - * The remaining two channels are handled somewhat differently. They appear - * to be closely tied and share one set of registers. They also seem to run - * continuously, although how you keep the buffer filled in this scenario is - * not understood as there seems to be only one input and one output buffer - * pointer. - * - * Much of this was extrapolated from what was known about the Ethernet - * registers and subsequently confirmed using MacsBug (ie by pinging the - * machine with easy-to-find patterns and looking for them in the DMA - * buffers, or by sending a file over the serial ports and finding the - * file in the buffers.) - * - * 1999-05-25 (jmt) - */ - -#define PSC_BASE (0x50F31000) - -/* - * The IER/IFR registers work like the VIA, except that it has 4 - * of them each on different interrupt levels, and each register - * set only seems to handle four interrupts instead of seven. - * - * To access a particular set of registers, add 0xn0 to the base - * where n = 3,4,5 or 6. - */ - -#define pIFRbase 0x100 -#define pIERbase 0x104 - -/* - * One-shot DMA control registers - */ - -#define PSC_MYSTERY 0x804 - -#define PSC_CTL_BASE 0xC00 - -#define PSC_SCSI_CTL 0xC00 -#define PSC_ENETRD_CTL 0xC10 -#define PSC_ENETWR_CTL 0xC20 -#define PSC_FDC_CTL 0xC30 -#define PSC_SCCA_CTL 0xC40 -#define PSC_SCCB_CTL 0xC50 -#define PSC_SCCATX_CTL 0xC60 - -/* - * DMA channels. Add +0x10 for the second channel in the set. - * You're supposed to use one channel while the other runs and - * then flip channels and do the whole thing again. - */ - -#define PSC_ADDR_BASE 0x1000 -#define PSC_LEN_BASE 0x1004 -#define PSC_CMD_BASE 0x1008 - -#define PSC_SET0 0x00 -#define PSC_SET1 0x10 - -#define PSC_SCSI_ADDR 0x1000 /* confirmed */ -#define PSC_SCSI_LEN 0x1004 /* confirmed */ -#define PSC_SCSI_CMD 0x1008 /* confirmed */ -#define PSC_ENETRD_ADDR 0x1020 /* confirmed */ -#define PSC_ENETRD_LEN 0x1024 /* confirmed */ -#define PSC_ENETRD_CMD 0x1028 /* confirmed */ -#define PSC_ENETWR_ADDR 0x1040 /* confirmed */ -#define PSC_ENETWR_LEN 0x1044 /* confirmed */ -#define PSC_ENETWR_CMD 0x1048 /* confirmed */ -#define PSC_FDC_ADDR 0x1060 /* strongly suspected */ -#define PSC_FDC_LEN 0x1064 /* strongly suspected */ -#define PSC_FDC_CMD 0x1068 /* strongly suspected */ -#define PSC_SCCA_ADDR 0x1080 /* confirmed */ -#define PSC_SCCA_LEN 0x1084 /* confirmed */ -#define PSC_SCCA_CMD 0x1088 /* confirmed */ -#define PSC_SCCB_ADDR 0x10A0 /* confirmed */ -#define PSC_SCCB_LEN 0x10A4 /* confirmed */ -#define PSC_SCCB_CMD 0x10A8 /* confirmed */ -#define PSC_SCCATX_ADDR 0x10C0 /* confirmed */ -#define PSC_SCCATX_LEN 0x10C4 /* confirmed */ -#define PSC_SCCATX_CMD 0x10C8 /* confirmed */ - -/* - * Free-running DMA registers. The only part known for sure are the bits in - * the control register, the buffer addresses and the buffer length. Everything - * else is anybody's guess. - * - * These registers seem to be mirrored every thirty-two bytes up until offset - * 0x300. It's safe to assume then that a new set of registers starts there. - */ - -#define PSC_SND_CTL 0x200 /* - * [ 16-bit ] - * Sound (Singer?) control register. - * - * bit 0 : ???? - * bit 1 : ???? - * bit 2 : Set to one to enable sound - * output. Possibly a mute flag. - * bit 3 : ???? - * bit 4 : ???? - * bit 5 : ???? - * bit 6 : Set to one to enable pass-thru - * audio. In this mode the audio data - * seems to appear in both the input - * buffer and the output buffer. - * bit 7 : Set to one to activate the - * sound input DMA or zero to - * disable it. - * bit 8 : Set to one to activate the - * sound output DMA or zero to - * disable it. - * bit 9 : \ - * bit 11 : | - * These two bits control the sample - * rate. Usually set to binary 10 and - * MacOS 8.0 says I'm at 48 KHz. Using - * a binary value of 01 makes things - * sound about 1/2 speed (24 KHz?) and - * binary 00 is slower still (22 KHz?) - * - * Setting this to 0x0000 is a good way to - * kill all DMA at boot time so that the - * PSC won't overwrite the kernel image - * with sound data. - */ - -/* - * 0x0202 - 0x0203 is unused. Writing there - * seems to clobber the control register. - */ - -#define PSC_SND_SOURCE 0x204 /* - * [ 32-bit ] - * Controls input source and volume: - * - * bits 12-15 : input source volume, 0 - F - * bits 16-19 : unknown, always 0x5 - * bits 20-23 : input source selection: - * 0x3 = CD Audio - * 0x4 = External Audio - * - * The volume is definitely not the general - * output volume as it doesn't affect the - * alert sound volume. - */ -#define PSC_SND_STATUS1 0x208 /* - * [ 32-bit ] - * Appears to be a read-only status register. - * The usual value is 0x00400002. - */ -#define PSC_SND_HUH3 0x20C /* - * [ 16-bit ] - * Unknown 16-bit value, always 0x0000. - */ -#define PSC_SND_BITS2GO 0x20E /* - * [ 16-bit ] - * Counts down to zero from some constant - * value. The value appears to be the - * number of _bits_ remaining before the - * buffer is full, which would make sense - * since Apple's docs say the sound DMA - * channels are 1 bit wide. - */ -#define PSC_SND_INADDR 0x210 /* - * [ 32-bit ] - * Address of the sound input DMA buffer - */ -#define PSC_SND_OUTADDR 0x214 /* - * [ 32-bit ] - * Address of the sound output DMA buffer - */ -#define PSC_SND_LEN 0x218 /* - * [ 16-bit ] - * Length of both buffers in eight-byte units. - */ -#define PSC_SND_HUH4 0x21A /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ -#define PSC_SND_STATUS2 0x21C /* - * [ 16-bit ] - * Appears to e a read-only status register. - * The usual value is 0x0200. - */ -#define PSC_SND_HUH5 0x21E /* - * [ 16-bit ] - * Unknown, always 0x0000. - */ - -#ifndef __ASSEMBLY__ - -extern volatile __u8 *psc; -extern int psc_present; - -/* - * Access functions - */ - -static inline void psc_write_byte(int offset, __u8 data) -{ - *((volatile __u8 *)(psc + offset)) = data; -} - -static inline void psc_write_word(int offset, __u16 data) -{ - *((volatile __u16 *)(psc + offset)) = data; -} - -static inline void psc_write_long(int offset, __u32 data) -{ - *((volatile __u32 *)(psc + offset)) = data; -} - -static inline u8 psc_read_byte(int offset) -{ - return *((volatile __u8 *)(psc + offset)); -} - -static inline u16 psc_read_word(int offset) -{ - return *((volatile __u16 *)(psc + offset)); -} - -static inline u32 psc_read_long(int offset) -{ - return *((volatile __u32 *)(psc + offset)); -} - -#endif /* __ASSEMBLY__ */ |
