diff options
Diffstat (limited to 'include/asm-ia64/sn/bte.h')
| -rw-r--r-- | include/asm-ia64/sn/bte.h | 233 |
1 files changed, 0 insertions, 233 deletions
diff --git a/include/asm-ia64/sn/bte.h b/include/asm-ia64/sn/bte.h deleted file mode 100644 index a0d214f43115..000000000000 --- a/include/asm-ia64/sn/bte.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. - */ - - -#ifndef _ASM_IA64_SN_BTE_H -#define _ASM_IA64_SN_BTE_H - -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/cache.h> -#include <asm/sn/pda.h> -#include <asm/sn/types.h> -#include <asm/sn/shub_mmr.h> - -#define IBCT_NOTIFY (0x1UL << 4) -#define IBCT_ZFIL_MODE (0x1UL << 0) - -/* #define BTE_DEBUG */ -/* #define BTE_DEBUG_VERBOSE */ - -#ifdef BTE_DEBUG -# define BTE_PRINTK(x) printk x /* Terse */ -# ifdef BTE_DEBUG_VERBOSE -# define BTE_PRINTKV(x) printk x /* Verbose */ -# else -# define BTE_PRINTKV(x) -# endif /* BTE_DEBUG_VERBOSE */ -#else -# define BTE_PRINTK(x) -# define BTE_PRINTKV(x) -#endif /* BTE_DEBUG */ - - -/* BTE status register only supports 16 bits for length field */ -#define BTE_LEN_BITS (16) -#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) -#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES) - - -/* Define hardware */ -#define BTES_PER_NODE (is_shub2() ? 4 : 2) -#define MAX_BTES_PER_NODE 4 - -#define BTE2OFF_CTRL 0 -#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) - -#define BTE_BASE_ADDR(interface) \ - (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ - (interface == 1) ? SH2_BT_ENG_CSR_1 : \ - (interface == 2) ? SH2_BT_ENG_CSR_2 : \ - SH2_BT_ENG_CSR_3 \ - : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) - -#define BTE_SOURCE_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_SRC/8) \ - : base + (BTEOFF_SRC/8)) - -#define BTE_DEST_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_DEST/8) \ - : base + (BTEOFF_DEST/8)) - -#define BTE_CTRL_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_CTRL/8) \ - : base + (BTEOFF_CTRL/8)) - -#define BTE_NOTIF_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ - : base + (BTEOFF_NOTIFY/8)) - -/* Define hardware modes */ -#define BTE_NOTIFY IBCT_NOTIFY -#define BTE_NORMAL BTE_NOTIFY -#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) -/* Use a reserved bit to let the caller specify a wait for any BTE */ -#define BTE_WACQUIRE 0x4000 -/* Use the BTE on the node with the destination memory */ -#define BTE_USE_DEST (BTE_WACQUIRE << 1) -/* Use any available BTE interface on any node for the transfer */ -#define BTE_USE_ANY (BTE_USE_DEST << 1) -/* macro to force the IBCT0 value valid */ -#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) - -#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) -#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) -#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) - -/* - * Some macros to simplify reading. - * Start with macros to locate the BTE control registers. - */ -#define BTE_LNSTAT_LOAD(_bte) \ - HUB_L(_bte->bte_base_addr) -#define BTE_LNSTAT_STORE(_bte, _x) \ - HUB_S(_bte->bte_base_addr, (_x)) -#define BTE_SRC_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_source_addr, __addr); \ -}) -#define BTE_DEST_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_destination_addr, __addr); \ -}) -#define BTE_CTRL_STORE(_bte, _x) \ - HUB_S(_bte->bte_control_addr, (_x)) -#define BTE_NOTIF_STORE(_bte, _x) \ -({ \ - u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_notify_addr, __addr); \ -}) - -#define BTE_START_TRANSFER(_bte, _len, _mode) \ - is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ - : BTE_LNSTAT_STORE(_bte, _len); \ - BTE_CTRL_STORE(_bte, _mode) - -/* Possible results from bte_copy and bte_unaligned_copy */ -/* The following error codes map into the BTE hardware codes - * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses - * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero - * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error - * codes to give the following error codes. - */ -#define BTEFAIL_OFFSET 1 - -typedef enum { - BTE_SUCCESS, /* 0 is success */ - BTEFAIL_DIR, /* Directory error due to IIO access*/ - BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ - BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ - BTEFAIL_ACCESS, /* access error (protection violation) */ - BTEFAIL_PWERR, /* Partial Write Error */ - BTEFAIL_PRERR, /* Partial Read Error */ - BTEFAIL_TOUT, /* CRB Time out */ - BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ - BTEFAIL_NOTAVAIL, /* BTE not available */ -} bte_result_t; - -#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ -#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ -#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ -#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ -#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ -#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ -#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ - -#define BTE_ERR_BITS 0x3FUL -#define BTE_ERR_SHIFT 36 -#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) - -#define BTE_ERROR_RETRY(value) \ - (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ - : (value != BTEFAIL_TOUT)) - -/* - * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() - */ -#define BTE_SHUB2_ERROR(_status) \ - ((_status & BTE_ERR_MASK) \ - ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ - : _status) - -#define BTE_GET_ERROR_STATUS(_status) \ - (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) - -#define BTE_VALID_SH2_ERROR(value) \ - ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) - -/* - * Structure defining a bte. An instance of this - * structure is created in the nodepda for each - * bte on that node (as defined by BTES_PER_NODE) - * This structure contains everything necessary - * to work with a BTE. - */ -struct bteinfo_s { - volatile u64 notify ____cacheline_aligned; - u64 *bte_base_addr ____cacheline_aligned; - u64 *bte_source_addr; - u64 *bte_destination_addr; - u64 *bte_control_addr; - u64 *bte_notify_addr; - spinlock_t spinlock; - cnodeid_t bte_cnode; /* cnode */ - int bte_error_count; /* Number of errors encountered */ - int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ - int cleanup_active; /* Interface is locked for cleanup */ - volatile bte_result_t bh_error; /* error while processing */ - volatile u64 *most_rcnt_na; - struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; -}; - - -/* - * Function prototypes (functions defined in bte.c, used elsewhere) - */ -extern bte_result_t bte_copy(u64, u64, u64, u64, void *); -extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); -extern void bte_error_handler(unsigned long); - -#define bte_zero(dest, len, mode, notification) \ - bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) - -/* - * The following is the prefered way of calling bte_unaligned_copy - * If the copy is fully cache line aligned, then bte_copy is - * used instead. Since bte_copy is inlined, this saves a call - * stack. NOTE: bte_copy is called synchronously and does block - * until the transfer is complete. In order to get the asynch - * version of bte_copy, you must perform this check yourself. - */ -#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ - (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \ - (dest & L1_CACHE_MASK)) ? \ - bte_unaligned_copy(src, dest, len, mode) : \ - bte_copy(src, dest, len, mode, NULL)) - - -#endif /* _ASM_IA64_SN_BTE_H */ |
