5 files changed, 14 insertions, 11 deletions
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index 2b66ecf489f7..746a794b3119 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -7,9 +7,7 @@
  */
 
 /* This file shoule be up to date with:
- *  - Revision M, March 13, 2007; ADSP-BF537 Blackfin Processor Anomaly List
- *  - Revision L, March 13, 2007; ADSP-BF536 Blackfin Processor Anomaly List
- *  - Revision M, March 13, 2007; ADSP-BF534 Blackfin Processor Anomaly List
+ *  - Revision A, 09/04/2007; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -17,7 +15,7 @@
 
 /* We do not support 0.1 silicon - sorry */
 #if __SILICON_REVISION__ < 2
-# error Kernel will not work on BF537 silicon version 0.0 or 0.1
+# error will not work on BF537 silicon version 0.0 or 0.1
 #endif
 
 #if defined(__ADSPBF534__)
@@ -44,6 +42,8 @@
 #define ANOMALY_05000122 (1)
 /* Killed 32-bit MMR write leads to next system MMR access thinking it should be 32-bit */
 #define ANOMALY_05000157 (__SILICON_REVISION__ < 2)
+/* Turning SPORTs on while External Frame Sync Is Active May Corrupt Data */
+#define ANOMALY_05000167 (1)
 /* PPI_DELAY not functional in PPI modes with 0 frame syncs */
 #define ANOMALY_05000180 (1)
 /* Instruction Cache Is Not Functional */
@@ -130,6 +130,12 @@
 #define ANOMALY_05000321 (__SILICON_REVISION__ < 3)
 /* EMAC RMII mode at 10-Base-T speed: RX frames not received properly */
 #define ANOMALY_05000322 (1)
+/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
+#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* DMAs that Go Urgent during Tight Core Writes to External Memory Are Blocked */
+#define ANOMALY_05000359 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index 6fb328f5186a..86e45c379838 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -146,7 +146,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 
 	if (uart->rts_pin >= 0) {
 		gpio_request(uart->rts_pin, DRIVER_NAME);
-		gpio_direction_output(uart->rts_pin);
+		gpio_direction_output(uart->rts_pin, 0);
 	}
 #endif
 }
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/include/asm-blackfin/mach-bf537/irq.h
index 36c44bc1a917..be6f2ff77f31 100644
--- a/include/asm-blackfin/mach-bf537/irq.h
+++ b/include/asm-blackfin/mach-bf537/irq.h
@@ -162,11 +162,7 @@ Core        Emulation               **
 
 #define GPIO_IRQ_BASE	IRQ_PF0
 
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define NR_IRQS     (IRQ_PH15+1)
-#else
-#define NR_IRQS     (IRQ_UART1_ERROR+1)
-#endif
 
 #define IVG7            7
 #define IVG8            8
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h
index 18759e38eaae..5c6726d6f3b1 100644
--- a/include/asm-blackfin/mach-bf537/mem_map.h
+++ b/include/asm-blackfin/mach-bf537/mem_map.h
@@ -47,6 +47,7 @@
 /* Boot ROM Memory */
 
 #define BOOT_ROM_START		0xEF000000
+#define BOOT_ROM_LENGTH		0x800
 
 /* Level 1 Memory */
 
@@ -167,9 +168,7 @@
 
 /* Scratch Pad Memory */
 
-#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
 #define L1_SCRATCH_START	0xFFB00000
 #define L1_SCRATCH_LENGTH	0x1000
-#endif
 
 #endif				/* _MEM_MAP_537_H_ */
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
index 5a3f7d3bf73d..78fee6e0f237 100644
--- a/include/asm-blackfin/mach-bf537/portmux.h
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -1,6 +1,8 @@
 #ifndef _MACH_PORTMUX_H_
 #define _MACH_PORTMUX_H_
 
+#define MAX_RESOURCES 	(MAX_BLACKFIN_GPIOS + GPIO_BANKSIZE)	/* We additionally handle PORTJ */
+
 #define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
 #define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
 #define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))