diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf533')
| -rw-r--r-- | include/asm-blackfin/mach-bf533/anomaly.h | 272 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/bf533.h | 161 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/bfin_serial_5xx.h | 164 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/bfin_sir.h | 120 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/blackfin.h | 60 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/cdefBF532.h | 767 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/defBF532.h | 1266 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/dma.h | 54 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/irq.h | 173 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/mem_init.h | 324 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/mem_map.h | 166 | ||||
| -rw-r--r-- | include/asm-blackfin/mach-bf533/portmux.h | 67 |
12 files changed, 0 insertions, 3594 deletions
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h deleted file mode 100644 index 8f7ea112fd3a..000000000000 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * Copyright (C) 2004-2008 Analog Devices Inc. - * Licensed under the GPL-2 or later. - */ - -/* This file shoule be up to date with: - * - Revision C, 02/08/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List - */ - -#ifndef _MACH_ANOMALY_H_ -#define _MACH_ANOMALY_H_ - -/* We do not support 0.1 or 0.2 silicon - sorry */ -#if __SILICON_REVISION__ < 3 -# error will not work on BF533 silicon version 0.0, 0.1, or 0.2 -#endif - -#if defined(__ADSPBF531__) -# define ANOMALY_BF531 1 -#else -# define ANOMALY_BF531 0 -#endif -#if defined(__ADSPBF532__) -# define ANOMALY_BF532 1 -#else -# define ANOMALY_BF532 0 -#endif -#if defined(__ADSPBF533__) -# define ANOMALY_BF533 1 -#else -# define ANOMALY_BF533 0 -#endif - -/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */ -#define ANOMALY_05000074 (1) -/* UART Line Status Register (UART_LSR) Bits Are Not Updated at the Same Time */ -#define ANOMALY_05000099 (__SILICON_REVISION__ < 5) -/* Watchpoint Status Register (WPSTAT) Bits Are Set on Every Corresponding Match */ -#define ANOMALY_05000105 (1) -/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ -#define ANOMALY_05000119 (1) -/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ -#define ANOMALY_05000122 (1) -/* Instruction DMA Can Cause Data Cache Fills to Fail (Boot Implications) */ -#define ANOMALY_05000158 (__SILICON_REVISION__ < 5) -/* PPI Data Lengths Between 8 and 16 Do Not Zero Out Upper Bits */ -#define ANOMALY_05000166 (1) -/* Turning Serial Ports on with External Frame Syncs */ -#define ANOMALY_05000167 (1) -/* PPI_COUNT Cannot Be Programmed to 0 in General Purpose TX or RX Modes */ -#define ANOMALY_05000179 (__SILICON_REVISION__ < 5) -/* PPI_DELAY Not Functional in PPI Modes with 0 Frame Syncs */ -#define ANOMALY_05000180 (1) -/* Timer Pin Limitations for PPI TX Modes with External Frame Syncs */ -#define ANOMALY_05000183 (__SILICON_REVISION__ < 4) -/* False Protection Exceptions */ -#define ANOMALY_05000189 (__SILICON_REVISION__ < 4) -/* False I/O Pin Interrupts on Edge-Sensitive Inputs When Polarity Setting Is Changed */ -#define ANOMALY_05000193 (__SILICON_REVISION__ < 4) -/* Restarting SPORT in Specific Modes May Cause Data Corruption */ -#define ANOMALY_05000194 (__SILICON_REVISION__ < 4) -/* Failing MMR Accesses When Stalled by Preceding Memory Read */ -#define ANOMALY_05000198 (__SILICON_REVISION__ < 5) -/* Current DMA Address Shows Wrong Value During Carry Fix */ -#define ANOMALY_05000199 (__SILICON_REVISION__ < 4) -/* SPORT TFS and DT Are Incorrectly Driven During Inactive Channels in Certain Conditions */ -#define ANOMALY_05000200 (__SILICON_REVISION__ < 5) -/* Receive Frame Sync Not Ignored During Active Frames in SPORT Multi-Channel Mode */ -#define ANOMALY_05000201 (__SILICON_REVISION__ < 4) -/* Possible Infinite Stall with Specific Dual-DAG Situation */ -#define ANOMALY_05000202 (__SILICON_REVISION__ < 5) -/* Specific Sequence That Can Cause DMA Error or DMA Stopping */ -#define ANOMALY_05000203 (__SILICON_REVISION__ < 4) -/* Incorrect data read with write-through cache and allocate cache lines on reads only mode */ -#define ANOMALY_05000204 (__SILICON_REVISION__ < 4 && ANOMALY_BF533) -/* Recovery from "Brown-Out" Condition */ -#define ANOMALY_05000207 (__SILICON_REVISION__ < 4) -/* VSTAT Status Bit in PLL_STAT Register Is Not Functional */ -#define ANOMALY_05000208 (1) -/* Speed Path in Computational Unit Affects Certain Instructions */ -#define ANOMALY_05000209 (__SILICON_REVISION__ < 4) -/* UART TX Interrupt Masked Erroneously */ -#define ANOMALY_05000215 (__SILICON_REVISION__ < 5) -/* NMI Event at Boot Time Results in Unpredictable State */ -#define ANOMALY_05000219 (1) -/* Incorrect Pulse-Width of UART Start Bit */ -#define ANOMALY_05000225 (__SILICON_REVISION__ < 5) -/* Scratchpad Memory Bank Reads May Return Incorrect Data */ -#define ANOMALY_05000227 (__SILICON_REVISION__ < 5) -/* SPI Slave Boot Mode Modifies Registers from Reset Value */ -#define ANOMALY_05000229 (1) -/* UART Receiver is Less Robust Against Baudrate Differences in Certain Conditions */ -#define ANOMALY_05000230 (__SILICON_REVISION__ < 5) -/* UART STB Bit Incorrectly Affects Receiver Setting */ -#define ANOMALY_05000231 (__SILICON_REVISION__ < 5) -/* PPI_FS3 Is Not Driven in 2 or 3 Internal Frame Sync Transmit Modes */ -#define ANOMALY_05000233 (__SILICON_REVISION__ < 4) -/* Incorrect Revision Number in DSPID Register */ -#define ANOMALY_05000234 (__SILICON_REVISION__ == 4) -/* DF Bit in PLL_CTL Register Does Not Respond to Hardware Reset */ -#define ANOMALY_05000242 (__SILICON_REVISION__ < 4) -/* If I-Cache Is On, CSYNC/SSYNC/IDLE Around Change of Control Causes Failures */ -#define ANOMALY_05000244 (__SILICON_REVISION__ < 5) -/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ -#define ANOMALY_05000245 (1) -/* Data CPLBs Should Prevent Spurious Hardware Errors */ -#define ANOMALY_05000246 (__SILICON_REVISION__ < 5) -/* Incorrect Bit Shift of Data Word in Multichannel (TDM) Mode in Certain Conditions */ -#define ANOMALY_05000250 (__SILICON_REVISION__ == 4) -/* Maximum External Clock Speed for Timers */ -#define ANOMALY_05000253 (__SILICON_REVISION__ < 5) -/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */ -#define ANOMALY_05000254 (__SILICON_REVISION__ > 4) -/* Entering Hibernate State with RTC Seconds Interrupt Not Functional */ -#define ANOMALY_05000255 (__SILICON_REVISION__ < 5) -/* Interrupt/Exception During Short Hardware Loop May Cause Bad Instruction Fetches */ -#define ANOMALY_05000257 (__SILICON_REVISION__ < 5) -/* Instruction Cache Is Corrupted When Bits 9 and 12 of the ICPLB Data Registers Differ */ -#define ANOMALY_05000258 (__SILICON_REVISION__ < 5) -/* ICPLB_STATUS MMR Register May Be Corrupted */ -#define ANOMALY_05000260 (__SILICON_REVISION__ < 5) -/* DCPLB_FAULT_ADDR MMR Register May Be Corrupted */ -#define ANOMALY_05000261 (__SILICON_REVISION__ < 5) -/* Stores To Data Cache May Be Lost */ -#define ANOMALY_05000262 (__SILICON_REVISION__ < 5) -/* Hardware Loop Corrupted When Taking an ICPLB Exception */ -#define ANOMALY_05000263 (__SILICON_REVISION__ < 5) -/* CSYNC/SSYNC/IDLE Causes Infinite Stall in Penultimate Instruction in Hardware Loop */ -#define ANOMALY_05000264 (__SILICON_REVISION__ < 5) -/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ -#define ANOMALY_05000265 (__SILICON_REVISION__ < 5) -/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Increase */ -#define ANOMALY_05000269 (__SILICON_REVISION__ < 5) -/* High I/O Activity Causes Output Voltage of Internal Voltage Regulator (Vddint) to Decrease */ -#define ANOMALY_05000270 (__SILICON_REVISION__ < 5) -/* Spontaneous Reset of Internal Voltage Regulator */ -#define ANOMALY_05000271 (__SILICON_REVISION__ < 4) -/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */ -#define ANOMALY_05000272 (1) -/* Writes to Synchronous SDRAM Memory May Be Lost */ -#define ANOMALY_05000273 (1) -/* Timing Requirements Change for External Frame Sync PPI Modes with Non-Zero PPI_DELAY */ -#define ANOMALY_05000276 (1) -/* Writes to an I/O Data Register One SCLK Cycle after an Edge Is Detected May Clear Interrupt */ -#define ANOMALY_05000277 (1) -/* Disabling Peripherals with DMA Running May Cause DMA System Instability */ -#define ANOMALY_05000278 (1) -/* False Hardware Error Exception When ISR Context Is Not Restored */ -#define ANOMALY_05000281 (1) -/* Memory DMA Corruption with 32-Bit Data and Traffic Control */ -#define ANOMALY_05000282 (1) -/* System MMR Write Is Stalled Indefinitely When Killed in a Particular Stage */ -#define ANOMALY_05000283 (1) -/* SPORTs May Receive Bad Data If FIFOs Fill Up */ -#define ANOMALY_05000288 (1) -/* Memory-To-Memory DMA Source/Destination Descriptors Must Be in Same Memory Space */ -#define ANOMALY_05000301 (1) -/* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */ -#define ANOMALY_05000302 (__SILICON_REVISION__ < 5) -/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */ -#define ANOMALY_05000305 (__SILICON_REVISION__ < 5) -/* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */ -#define ANOMALY_05000306 (__SILICON_REVISION__ < 5) -/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ -#define ANOMALY_05000310 (1) -/* Erroneous Flag (GPIO) Pin Operations under Specific Sequences */ -#define ANOMALY_05000311 (1) -/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ -#define ANOMALY_05000312 (1) -/* PPI Is Level-Sensitive on First Transfer */ -#define ANOMALY_05000313 (1) -/* Killed System MMR Write Completes Erroneously On Next System MMR Access */ -#define ANOMALY_05000315 (1) -/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ -#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) -/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (1) -/* UART Break Signal Issues */ -#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) -/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ -#define ANOMALY_05000366 (1) -/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (1) -/* PPI Does Not Start Properly In Specific Mode */ -#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5) -/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) -/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ -#define ANOMALY_05000403 (1) - - -/* These anomalies have been "phased" out of analog.com anomaly sheets and are - * here to show running on older silicon just isn't feasible. - */ - -/* Watchpoints (Hardware Breakpoints) are not supported */ -#define ANOMALY_05000067 (__SILICON_REVISION__ < 3) -/* Reserved bits in SYSCFG register not set at power on */ -#define ANOMALY_05000109 (__SILICON_REVISION__ < 3) -/* Trace Buffers may record discontinuities into emulation mode and/or exception, NMI, reset handlers */ -#define ANOMALY_05000116 (__SILICON_REVISION__ < 3) -/* DTEST_COMMAND initiated memory access may be incorrect if data cache or DMA is active */ -#define ANOMALY_05000123 (__SILICON_REVISION__ < 3) -/* DMA Lock-up at CCLK to SCLK ratios of 4:1, 2:1, or 1:1 */ -#define ANOMALY_05000124 (__SILICON_REVISION__ < 3) -/* Erroneous exception when enabling cache */ -#define ANOMALY_05000125 (__SILICON_REVISION__ < 3) -/* SPI clock polarity and phase bits incorrect during booting */ -#define ANOMALY_05000126 (__SILICON_REVISION__ < 3) -/* DMEM_CONTROL is not set on Reset */ -#define ANOMALY_05000137 (__SILICON_REVISION__ < 3) -/* SPI boot will not complete if there is a zero fill block in the loader file */ -#define ANOMALY_05000138 (__SILICON_REVISION__ < 3) -/* Allowing the SPORT RX FIFO to fill will cause an overflow */ -#define ANOMALY_05000140 (__SILICON_REVISION__ < 3) -/* An Infinite Stall occurs with a particular sequence of consecutive dual dag events */ -#define ANOMALY_05000141 (__SILICON_REVISION__ < 3) -/* Interrupts may be lost when a programmable input flag is configured to be edge sensitive */ -#define ANOMALY_05000142 (__SILICON_REVISION__ < 3) -/* A read from external memory may return a wrong value with data cache enabled */ -#define ANOMALY_05000143 (__SILICON_REVISION__ < 3) -/* DMA and TESTSET conflict when both are accessing external memory */ -#define ANOMALY_05000144 (__SILICON_REVISION__ < 3) -/* In PWM_OUT mode, you must enable the PPI block to generate a waveform from PPI_CLK */ -#define ANOMALY_05000145 (__SILICON_REVISION__ < 3) -/* MDMA may lose the first few words of a descriptor chain */ -#define ANOMALY_05000146 (__SILICON_REVISION__ < 3) -/* The source MDMA descriptor may stop with a DMA Error */ -#define ANOMALY_05000147 (__SILICON_REVISION__ < 3) -/* When booting from a 16-bit asynchronous memory device, the upper 8-bits of each word must be 0x00 */ -#define ANOMALY_05000148 (__SILICON_REVISION__ < 3) -/* Frame Delay in SPORT Multichannel Mode */ -#define ANOMALY_05000153 (__SILICON_REVISION__ < 3) -/* SPORT TFS signal is active in Multi-channel mode outside of valid channels */ -#define ANOMALY_05000154 (__SILICON_REVISION__ < 3) -/* Timer1 can not be used for PWMOUT mode when a certain PPI mode is in use */ -#define ANOMALY_05000155 (__SILICON_REVISION__ < 3) -/* A killed 32-bit System MMR write will lead to the next system MMR access thinking it should be 32-bit. */ -#define ANOMALY_05000157 (__SILICON_REVISION__ < 3) -/* SPORT transmit data is not gated by external frame sync in certain conditions */ -#define ANOMALY_05000163 (__SILICON_REVISION__ < 3) -/* SDRAM auto-refresh and subsequent Power Ups */ -#define ANOMALY_05000168 (__SILICON_REVISION__ < 3) -/* DATA CPLB page miss can result in lost write-through cache data writes */ -#define ANOMALY_05000169 (__SILICON_REVISION__ < 3) -/* DMA vs Core accesses to external memory */ -#define ANOMALY_05000173 (__SILICON_REVISION__ < 3) -/* Cache Fill Buffer Data lost */ -#define ANOMALY_05000174 (__SILICON_REVISION__ < 3) -/* Overlapping Sequencer and Memory Stalls */ -#define ANOMALY_05000175 (__SILICON_REVISION__ < 3) -/* Multiplication of (-1) by (-1) followed by an accumulator saturation */ -#define ANOMALY_05000176 (__SILICON_REVISION__ < 3) -/* Disabling the PPI resets the PPI configuration registers */ -#define ANOMALY_05000181 (__SILICON_REVISION__ < 3) -/* PPI TX Mode with 2 External Frame Syncs */ -#define ANOMALY_05000185 (__SILICON_REVISION__ < 3) -/* PPI does not invert the Driving PPICLK edge in Transmit Modes */ -#define ANOMALY_05000191 (__SILICON_REVISION__ < 3) -/* In PPI Transmit Modes with External Frame Syncs POLC */ -#define ANOMALY_05000192 (__SILICON_REVISION__ < 3) -/* Internal Voltage Regulator may not start up */ -#define ANOMALY_05000206 (__SILICON_REVISION__ < 3) - -/* Anomalies that don't exist on this proc */ -#define ANOMALY_05000266 (0) -#define ANOMALY_05000323 (0) - -#endif diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/include/asm-blackfin/mach-bf533/bf533.h deleted file mode 100644 index 12a416931991..000000000000 --- a/include/asm-blackfin/mach-bf533/bf533.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/bf533.h - * Based on: - * Author: - * - * Created: - * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __MACH_BF533_H__ -#define __MACH_BF533_H__ - -#define SUPPORTED_REVID 2 - -#define OFFSET_(x) ((x) & 0x0000FFFF) - -/*some misc defines*/ -#define IMASK_IVG15 0x8000 -#define IMASK_IVG14 0x4000 -#define IMASK_IVG13 0x2000 -#define IMASK_IVG12 0x1000 - -#define IMASK_IVG11 0x0800 -#define IMASK_IVG10 0x0400 -#define IMASK_IVG9 0x0200 -#define IMASK_IVG8 0x0100 - -#define IMASK_IVG7 0x0080 -#define IMASK_IVGTMR 0x0040 -#define IMASK_IVGHW 0x0020 - -/***************************/ - - -#define BFIN_DSUBBANKS 4 -#define BFIN_DWAYS 2 -#define BFIN_DLINES 64 -#define BFIN_ISUBBANKS 4 -#define BFIN_IWAYS 4 -#define BFIN_ILINES 32 - -#define WAY0_L 0x1 -#define WAY1_L 0x2 -#define WAY01_L 0x3 -#define WAY2_L 0x4 -#define WAY02_L 0x5 -#define WAY12_L 0x6 -#define WAY012_L 0x7 - -#define WAY3_L 0x8 -#define WAY03_L 0x9 -#define WAY13_L 0xA -#define WAY013_L 0xB - -#define WAY32_L 0xC -#define WAY320_L 0xD -#define WAY321_L 0xE -#define WAYALL_L 0xF - -#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */ - -/* IAR0 BIT FIELDS*/ -#define RTC_ERROR_BIT 0x0FFFFFFF -#define UART_ERROR_BIT 0xF0FFFFFF -#define SPORT1_ERROR_BIT 0xFF0FFFFF -#define SPI_ERROR_BIT 0xFFF0FFFF -#define SPORT0_ERROR_BIT 0xFFFF0FFF -#define PPI_ERROR_BIT 0xFFFFF0FF -#define DMA_ERROR_BIT 0xFFFFFF0F -#define PLLWAKE_ERROR_BIT 0xFFFFFFFF - -/* IAR1 BIT FIELDS*/ -#define DMA7_UARTTX_BIT 0x0FFFFFFF -#define DMA6_UARTRX_BIT 0xF0FFFFFF -#define DMA5_SPI_BIT 0xFF0FFFFF -#define DMA4_SPORT1TX_BIT 0xFFF0FFFF -#define DMA3_SPORT1RX_BIT 0xFFFF0FFF -#define DMA2_SPORT0TX_BIT 0xFFFFF0FF -#define DMA1_SPORT0RX_BIT 0xFFFFFF0F -#define DMA0_PPI_BIT 0xFFFFFFFF - -/* IAR2 BIT FIELDS*/ -#define WDTIMER_BIT 0x0FFFFFFF -#define MEMDMA1_BIT 0xF0FFFFFF -#define MEMDMA0_BIT 0xFF0FFFFF -#define PFB_BIT 0xFFF0FFFF -#define PFA_BIT 0xFFFF0FFF -#define TIMER2_BIT 0xFFFFF0FF -#define TIMER1_BIT 0xFFFFFF0F -#define TIMER0_BIT 0xFFFFFFFF - -/********************************* EBIU Settings ************************************/ -#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0) -#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2) - -#ifdef CONFIG_C_AMBEN_ALL -#define V_AMBEN AMBEN_ALL -#endif -#ifdef CONFIG_C_AMBEN -#define V_AMBEN 0x0 -#endif -#ifdef CONFIG_C_AMBEN_B0 -#define V_AMBEN AMBEN_B0 -#endif -#ifdef CONFIG_C_AMBEN_B0_B1 -#define V_AMBEN AMBEN_B0_B1 -#endif -#ifdef CONFIG_C_AMBEN_B0_B1_B2 -#define V_AMBEN AMBEN_B0_B1_B2 -#endif -#ifdef CONFIG_C_AMCKEN -#define V_AMCKEN AMCKEN -#else -#define V_AMCKEN 0x0 -#endif -#ifdef CONFIG_C_CDPRIO -#define V_CDPRIO 0x100 -#else -#define V_CDPRIO 0x0 -#endif - -#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO) - -#ifdef CONFIG_BF533 -#define CPU "BF533" -#define CPUID 0x027a5000 -#endif -#ifdef CONFIG_BF532 -#define CPU "BF532" -#define CPUID 0x0275A000 -#endif -#ifdef CONFIG_BF531 -#define CPU "BF531" -#define CPUID 0x027a5000 -#endif -#ifndef CPU -#define CPU "UNKNOWN" -#define CPUID 0x0 -#endif - -#endif /* __MACH_BF533_H__ */ diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h deleted file mode 100644 index ebf592b59aab..000000000000 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ /dev/null @@ -1,164 +0,0 @@ -/* - * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h - * based on: - * author: - * - * created: - * description: - * blackfin serial driver head file - * rev: - * - * modified: - * - * - * bugs: enter bugs at http://blackfin.uclinux.org/ - * - * this program is free software; you can redistribute it and/or modify - * it under the terms of the gnu general public license as published by - * the free software foundation; either version 2, or (at your option) - * any later version. - * - * this program is distributed in the hope that it will be useful, - * but without any warranty; without even the implied warranty of - * merchantability or fitness for a particular purpose. see the - * gnu general public license for more details. - * - * you should have received a copy of the gnu general public license - * along with this program; see the file copying. - * if not, write to the free software foundation, - * 59 temple place - suite 330, boston, ma 02111-1307, usa. - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR)) -#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL)) -#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER)) -#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH)) -#define UART_GET_IIR(uart) bfin_read16(((uart)->port.membase + OFFSET_IIR)) -#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR)) -#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL)) - -#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) -#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) -#define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) -#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) -#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) -#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) -#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) -#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) - -#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) -#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) - -#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) -#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) -#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) -#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) -#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_port { - struct uart_port port; - unsigned int old_status; - unsigned int lsr; -#ifdef CONFIG_SERIAL_BFIN_DMA - int tx_done; - int tx_count; - struct circ_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; - struct work_struct tx_dma_workqueue; -#else -# if ANOMALY_05000230 - unsigned int anomaly_threshold; -# endif -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct timer_list cts_timer; - int cts_pin; - int rts_pin; -#endif -}; - -/* The hardware clears the LSR bits upon read, so we need to cache - * some of the more fun bits in software so they don't get lost - * when checking the LSR in other code paths (TX). - */ -static inline unsigned int UART_GET_LSR(struct bfin_serial_port *uart) -{ - unsigned int lsr = bfin_read16(uart->port.membase + OFFSET_LSR); - uart->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | uart->lsr; -} - -static inline void UART_CLEAR_LSR(struct bfin_serial_port *uart) -{ - uart->lsr = 0; - bfin_write16(uart->port.membase + OFFSET_LSR, -1); -} - -struct bfin_serial_port bfin_serial_ports[BFIN_UART_NR_PORTS]; -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART_RX, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART_TX, - CH_UART_RX, -#endif -#ifdef CONFIG_BFIN_UART0_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -int nr_ports = BFIN_UART_NR_PORTS; -static void bfin_serial_hw_init(struct bfin_serial_port *uart) -{ - -#ifdef CONFIG_SERIAL_BFIN_UART0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - gpio_request(uart->cts_pin, DRIVER_NAME); - gpio_direction_input(uart->cts_pin); - } - if (uart->rts_pin >= 0) { - gpio_request(uart->rts_pin, DRIVER_NAME); - gpio_direction_input(uart->rts_pin, 0); - } -#endif -} diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/include/asm-blackfin/mach-bf533/bfin_sir.h deleted file mode 100644 index cefcf8bb505b..000000000000 --- a/include/asm-blackfin/mach-bf533/bfin_sir.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Blackfin Infra-red Driver - * - * Copyright 2006-2008 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - * - */ - -#include <linux/serial.h> -#include <asm/dma.h> -#include <asm/portmux.h> - -#define SIR_UART_GET_CHAR(port) bfin_read16((port)->membase + OFFSET_RBR) -#define SIR_UART_GET_DLL(port) bfin_read16((port)->membase + OFFSET_DLL) -#define SIR_UART_GET_IER(port) bfin_read16((port)->membase + OFFSET_IER) -#define SIR_UART_GET_DLH(port) bfin_read16((port)->membase + OFFSET_DLH) -#define SIR_UART_GET_IIR(port) bfin_read16((port)->membase + OFFSET_IIR) -#define SIR_UART_GET_LCR(port) bfin_read16((port)->membase + OFFSET_LCR) -#define SIR_UART_GET_GCTL(port) bfin_read16((port)->membase + OFFSET_GCTL) - -#define SIR_UART_PUT_CHAR(port, v) bfin_write16(((port)->membase + OFFSET_THR), v) -#define SIR_UART_PUT_DLL(port, v) bfin_write16(((port)->membase + OFFSET_DLL), v) -#define SIR_UART_PUT_IER(port, v) bfin_write16(((port)->membase + OFFSET_IER), v) -#define SIR_UART_PUT_DLH(port, v) bfin_write16(((port)->membase + OFFSET_DLH), v) -#define SIR_UART_PUT_LCR(port, v) bfin_write16(((port)->membase + OFFSET_LCR), v) -#define SIR_UART_PUT_GCTL(port, v) bfin_write16(((port)->membase + OFFSET_GCTL), v) - -#ifdef CONFIG_SIR_BFIN_DMA -struct dma_rx_buf { - char *buf; - int head; - int tail; - }; -#endif /* CONFIG_SIR_BFIN_DMA */ - -struct bfin_sir_port { - unsigned char __iomem *membase; - unsigned int irq; - unsigned int lsr; - unsigned long clk; - struct net_device *dev; -#ifdef CONFIG_SIR_BFIN_DMA - int tx_done; - struct dma_rx_buf rx_dma_buf; - struct timer_list rx_dma_timer; - int rx_dma_nrows; -#endif /* CONFIG_SIR_BFIN_DMA */ - unsigned int tx_dma_channel; - unsigned int rx_dma_channel; -}; - -struct bfin_sir_port sir_ports[BFIN_UART_NR_PORTS]; - -struct bfin_sir_port_res { - unsigned long base_addr; - int irq; - unsigned int rx_dma_channel; - unsigned int tx_dma_channel; -}; - -struct bfin_sir_port_res bfin_sir_port_resource[] = { -#ifdef CONFIG_BFIN_SIR0 - { - 0xFFC00400, - IRQ_UART_RX, - CH_UART_RX, - CH_UART_TX, - }, -#endif -}; - -int nr_sirs = ARRAY_SIZE(bfin_sir_port_resource); - -struct bfin_sir_self { - struct bfin_sir_port *sir_port; - spinlock_t lock; - unsigned int open; - int speed; - int newspeed; - - struct sk_buff *txskb; - struct sk_buff *rxskb; - struct net_device_stats stats; - struct device *dev; - struct irlap_cb *irlap; - struct qos_info qos; - - iobuff_t tx_buff; - iobuff_t rx_buff; - - struct work_struct work; - int mtt; -}; - -static inline unsigned int SIR_UART_GET_LSR(struct bfin_sir_port *port) -{ - unsigned int lsr = bfin_read16(port->membase + OFFSET_LSR); - port->lsr |= (lsr & (BI|FE|PE|OE)); - return lsr | port->lsr; -} - -static inline void SIR_UART_CLEAR_LSR(struct bfin_sir_port *port) -{ - port->lsr = 0; - bfin_read16(port->membase + OFFSET_LSR); -} - -#define DRIVER_NAME "bfin_sir" - -static void bfin_sir_hw_init(void) -{ -#ifdef CONFIG_BFIN_SIR0 - peripheral_request(P_UART0_TX, DRIVER_NAME); - peripheral_request(P_UART0_RX, DRIVER_NAME); -#endif - SSYNC(); -} diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/include/asm-blackfin/mach-bf533/blackfin.h deleted file mode 100644 index d80971b4e3aa..000000000000 --- a/include/asm-blackfin/mach-bf533/blackfin.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/blackfin.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _MACH_BLACKFIN_H_ -#define _MACH_BLACKFIN_H_ - -#define BF533_FAMILY - -#include "bf533.h" -#include "mem_map.h" -#include "defBF532.h" -#include "anomaly.h" - -#if !defined(__ASSEMBLY__) -#include "cdefBF532.h" -#endif - -#define BFIN_UART_NR_PORTS 1 - -#define OFFSET_THR 0x00 /* Transmit Holding register */ -#define OFFSET_RBR 0x00 /* Receive Buffer register */ -#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ -#define OFFSET_IER 0x04 /* Interrupt Enable Register */ -#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ -#define OFFSET_IIR 0x08 /* Interrupt Identification Register */ -#define OFFSET_LCR 0x0C /* Line Control Register */ -#define OFFSET_MCR 0x10 /* Modem Control Register */ -#define OFFSET_LSR 0x14 /* Line Status Register */ -#define OFFSET_MSR 0x18 /* Modem Status Register */ -#define OFFSET_SCR 0x1C /* SCR Scratch Register */ -#define OFFSET_GCTL 0x24 /* Global Control Register */ - -#endif /* _MACH_BLACKFIN_H_ */ diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/include/asm-blackfin/mach-bf533/cdefBF532.h deleted file mode 100644 index 154655452d4c..000000000000 --- a/include/asm-blackfin/mach-bf533/cdefBF532.h +++ /dev/null @@ -1,767 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/cdefBF532.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _CDEF_BF532_H -#define _CDEF_BF532_H - -#include <asm/blackfin.h> - -/*include all Core registers and bit definitions*/ -#include "defBF532.h" - -/*include core specific register pointer definitions*/ -#include <asm/mach-common/cdef_LPBlackfin.h> - -#include <asm/system.h> - -/* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ -#define bfin_read_PLL_CTL() bfin_read16(PLL_CTL) -/* Writing to PLL_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_PLL_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_PLL_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(PLL_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} -#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT) -#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val) -#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT) -#define bfin_write_PLL_LOCKCNT(val) bfin_write16(PLL_LOCKCNT,val) -#define bfin_read_CHIPID() bfin_read32(CHIPID) -#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV) -#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV,val) -#define bfin_read_VR_CTL() bfin_read16(VR_CTL) -/* Writing to VR_CTL initiates a PLL relock sequence. */ -static __inline__ void bfin_write_VR_CTL(unsigned int val) -{ - unsigned long flags, iwr; - - if (val == bfin_read_VR_CTL()) - return; - - local_irq_save(flags); - /* Enable the PLL Wakeup bit in SIC IWR */ - iwr = bfin_read32(SIC_IWR); - /* Only allow PPL Wakeup) */ - bfin_write32(SIC_IWR, IWR_ENABLE(0)); - - bfin_write16(VR_CTL, val); - SSYNC(); - asm("IDLE;"); - - bfin_write32(SIC_IWR, iwr); - local_irq_restore(flags); -} - -/* System Interrupt Controller (0xFFC0 0C00-0xFFC0 0FFF) */ -#define bfin_read_SWRST() bfin_read16(SWRST) -#define bfin_write_SWRST(val) bfin_write16(SWRST,val) -#define bfin_read_SYSCR() bfin_read16(SYSCR) -#define bfin_write_SYSCR(val) bfin_write16(SYSCR,val) -#define bfin_read_SIC_IAR0() bfin_read32(SIC_IAR0) -#define bfin_write_SIC_IAR0(val) bfin_write32(SIC_IAR0,val) -#define bfin_read_SIC_IAR1() bfin_read32(SIC_IAR1) -#define bfin_write_SIC_IAR1(val) bfin_write32(SIC_IAR1,val) -#define bfin_read_SIC_IAR2() bfin_read32(SIC_IAR2) -#define bfin_write_SIC_IAR2(val) bfin_write32(SIC_IAR2,val) -#define bfin_read_SIC_IAR3() bfin_read32(SIC_IAR3) -#define bfin_write_SIC_IAR3(val) bfin_write32(SIC_IAR3,val) -#define bfin_read_SIC_IMASK() bfin_read32(SIC_IMASK) -#define bfin_write_SIC_IMASK(val) bfin_write32(SIC_IMASK,val) -#define bfin_read_SIC_ISR() bfin_read32(SIC_ISR) -#define bfin_write_SIC_ISR(val) bfin_write32(SIC_ISR,val) -#define bfin_read_SIC_IWR() bfin_read32(SIC_IWR) -#define bfin_write_SIC_IWR(val) bfin_write32(SIC_IWR,val) - -/* Watchdog Timer (0xFFC0 1000-0xFFC0 13FF) */ -#define bfin_read_WDOG_CTL() bfin_read16(WDOG_CTL) -#define bfin_write_WDOG_CTL(val) bfin_write16(WDOG_CTL,val) -#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) -#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT,val) -#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) -#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT,val) - -/* Real Time Clock (0xFFC0 1400-0xFFC0 17FF) */ -#define bfin_read_RTC_STAT() bfin_read32(RTC_STAT) -#define bfin_write_RTC_STAT(val) bfin_write32(RTC_STAT,val) -#define bfin_read_RTC_ICTL() bfin_read16(RTC_ICTL) -#define bfin_write_RTC_ICTL(val) bfin_write16(RTC_ICTL,val) -#define bfin_read_RTC_ISTAT() bfin_read16(RTC_ISTAT) -#define bfin_write_RTC_ISTAT(val) bfin_write16(RTC_ISTAT,val) -#define bfin_read_RTC_SWCNT() bfin_read16(RTC_SWCNT) -#define bfin_write_RTC_SWCNT(val) bfin_write16(RTC_SWCNT,val) -#define bfin_read_RTC_ALARM() bfin_read32(RTC_ALARM) -#define bfin_write_RTC_ALARM(val) bfin_write32(RTC_ALARM,val) -#define bfin_read_RTC_FAST() bfin_read16(RTC_FAST) -#define bfin_write_RTC_FAST(val) bfin_write16(RTC_FAST,val) -#define bfin_read_RTC_PREN() bfin_read16(RTC_PREN) -#define bfin_write_RTC_PREN(val) bfin_write16(RTC_PREN,val) - -/* DMA Traffic controls */ -#define bfin_read_DMA_TCPER() bfin_read16(DMA_TCPER) -#define bfin_write_DMA_TCPER(val) bfin_write16(DMA_TCPER,val) -#define bfin_read_DMA_TCCNT() bfin_read16(DMA_TCCNT) -#define bfin_write_DMA_TCCNT(val) bfin_write16(DMA_TCCNT,val) - -/* Alternate deprecated register names (below) provided for backwards code compatibility */ -#define bfin_read_DMA_TC_PER() bfin_read16(DMA_TC_PER) -#define bfin_write_DMA_TC_PER(val) bfin_write16(DMA_TC_PER,val) -#define bfin_read_DMA_TC_CNT() bfin_read16(DMA_TC_CNT) -#define bfin_write_DMA_TC_CNT(val) bfin_write16(DMA_TC_CNT,val) - -/* General Purpose IO (0xFFC0 2400-0xFFC0 27FF) */ -#define bfin_read_FIO_DIR() bfin_read16(FIO_DIR) -#define bfin_write_FIO_DIR(val) bfin_write16(FIO_DIR,val) -#define bfin_read_FIO_MASKA_C() bfin_read16(FIO_MASKA_C) -#define bfin_write_FIO_MASKA_C(val) bfin_write16(FIO_MASKA_C,val) -#define bfin_read_FIO_MASKA_S() bfin_read16(FIO_MASKA_S) -#define bfin_write_FIO_MASKA_S(val) bfin_write16(FIO_MASKA_S,val) -#define bfin_read_FIO_MASKB_C() bfin_read16(FIO_MASKB_C) -#define bfin_write_FIO_MASKB_C(val) bfin_write16(FIO_MASKB_C,val) -#define bfin_read_FIO_MASKB_S() bfin_read16(FIO_MASKB_S) -#define bfin_write_FIO_MASKB_S(val) bfin_write16(FIO_MASKB_S,val) -#define bfin_read_FIO_POLAR() bfin_read16(FIO_POLAR) -#define bfin_write_FIO_POLAR(val) bfin_write16(FIO_POLAR,val) -#define bfin_read_FIO_EDGE() bfin_read16(FIO_EDGE) -#define bfin_write_FIO_EDGE(val) bfin_write16(FIO_EDGE,val) -#define bfin_read_FIO_BOTH() bfin_read16(FIO_BOTH) -#define bfin_write_FIO_BOTH(val) bfin_write16(FIO_BOTH,val) -#define bfin_read_FIO_INEN() bfin_read16(FIO_INEN) -#define bfin_write_FIO_INEN(val) bfin_write16(FIO_INEN,val) -#define bfin_read_FIO_MASKA_D() bfin_read16(FIO_MASKA_D) -#define bfin_write_FIO_MASKA_D(val) bfin_write16(FIO_MASKA_D,val) -#define bfin_read_FIO_MASKA_T() bfin_read16(FIO_MASKA_T) -#define bfin_write_FIO_MASKA_T(val) bfin_write16(FIO_MASKA_T,val) -#define bfin_read_FIO_MASKB_D() bfin_read16(FIO_MASKB_D) -#define bfin_write_FIO_MASKB_D(val) bfin_write16(FIO_MASKB_D,val) -#define bfin_read_FIO_MASKB_T() bfin_read16(FIO_MASKB_T) -#define bfin_write_FIO_MASKB_T(val) bfin_write16(FIO_MASKB_T,val) - - -#if ANOMALY_05000311 -#define BFIN_WRITE_FIO_FLAG(name) \ -static __inline__ void bfin_write_FIO_FLAG_ ## name (unsigned short val)\ -{\ - unsigned long flags;\ - local_irq_save(flags);\ - bfin_write16(FIO_FLAG_ ## name,val);\ - bfin_read_CHIPID();\ - local_irq_restore(flags);\ -} -BFIN_WRITE_FIO_FLAG(D) -BFIN_WRITE_FIO_FLAG(C) -BFIN_WRITE_FIO_FLAG(S) -BFIN_WRITE_FIO_FLAG(T) - -#define BFIN_READ_FIO_FLAG(name) \ -static __inline__ unsigned short bfin_read_FIO_FLAG_ ## name (void)\ -{\ - unsigned long flags;\ - unsigned short ret;\ - local_irq_save(flags);\ - ret = bfin_read16(FIO_FLAG_ ## name);\ - bfin_read_CHIPID();\ - local_irq_restore(flags);\ - return ret;\ -} -BFIN_READ_FIO_FLAG(D) -BFIN_READ_FIO_FLAG(C) -BFIN_READ_FIO_FLAG(S) -BFIN_READ_FIO_FLAG(T) - -#else -#define bfin_write_FIO_FLAG_D(val) bfin_write16(FIO_FLAG_D,val) -#define bfin_write_FIO_FLAG_C(val) bfin_write16(FIO_FLAG_C,val) -#define bfin_write_FIO_FLAG_S(val) bfin_write16(FIO_FLAG_S,val) -#define bfin_write_FIO_FLAG_T(val) bfin_write16(FIO_FLAG_T,val) -#define bfin_read_FIO_FLAG_T() bfin_read16(FIO_FLAG_T) -#define bfin_read_FIO_FLAG_C() bfin_read16(FIO_FLAG_C) -#define bfin_read_FIO_FLAG_S() bfin_read16(FIO_FLAG_S) -#define bfin_read_FIO_FLAG_D() bfin_read16(FIO_FLAG_D) -#endif - - -/* DMA Controller */ -#define bfin_read_DMA0_CONFIG() bfin_read16(DMA0_CONFIG) -#define bfin_write_DMA0_CONFIG(val) bfin_write16(DMA0_CONFIG,val) -#define bfin_read_DMA0_NEXT_DESC_PTR() bfin_read32(DMA0_NEXT_DESC_PTR) -#define bfin_write_DMA0_NEXT_DESC_PTR(val) bfin_write32(DMA0_NEXT_DESC_PTR,val) -#define bfin_read_DMA0_START_ADDR() bfin_read32(DMA0_START_ADDR) -#define bfin_write_DMA0_START_ADDR(val) bfin_write32(DMA0_START_ADDR,val) -#define bfin_read_DMA0_X_COUNT() bfin_read16(DMA0_X_COUNT) -#define bfin_write_DMA0_X_COUNT(val) bfin_write16(DMA0_X_COUNT,val) -#define bfin_read_DMA0_Y_COUNT() bfin_read16(DMA0_Y_COUNT) -#define bfin_write_DMA0_Y_COUNT(val) bfin_write16(DMA0_Y_COUNT,val) -#define bfin_read_DMA0_X_MODIFY() bfin_read16(DMA0_X_MODIFY) -#define bfin_write_DMA0_X_MODIFY(val) bfin_write16(DMA0_X_MODIFY,val) -#define bfin_read_DMA0_Y_MODIFY() bfin_read16(DMA0_Y_MODIFY) -#define bfin_write_DMA0_Y_MODIFY(val) bfin_write16(DMA0_Y_MODIFY,val) -#define bfin_read_DMA0_CURR_DESC_PTR() bfin_read32(DMA0_CURR_DESC_PTR) -#define bfin_write_DMA0_CURR_DESC_PTR(val) bfin_write32(DMA0_CURR_DESC_PTR,val) -#define bfin_read_DMA0_CURR_ADDR() bfin_read32(DMA0_CURR_ADDR) -#define bfin_write_DMA0_CURR_ADDR(val) bfin_write32(DMA0_CURR_ADDR,val) -#define bfin_read_DMA0_CURR_X_COUNT() bfin_read16(DMA0_CURR_X_COUNT) -#define bfin_write_DMA0_CURR_X_COUNT(val) bfin_write16(DMA0_CURR_X_COUNT,val) -#define bfin_read_DMA0_CURR_Y_COUNT() bfin_read16(DMA0_CURR_Y_COUNT) -#define bfin_write_DMA0_CURR_Y_COUNT(val) bfin_write16(DMA0_CURR_Y_COUNT,val) -#define bfin_read_DMA0_IRQ_STATUS() bfin_read16(DMA0_IRQ_STATUS) -#define bfin_write_DMA0_IRQ_STATUS(val) bfin_write16(DMA0_IRQ_STATUS,val) -#define bfin_read_DMA0_PERIPHERAL_MAP() bfin_read16(DMA0_PERIPHERAL_MAP) -#define bfin_write_DMA0_PERIPHERAL_MAP(val) bfin_write16(DMA0_PERIPHERAL_MAP,val) - -#define bfin_read_DMA1_CONFIG() bfin_read16(DMA1_CONFIG) -#define bfin_write_DMA1_CONFIG(val) bfin_write16(DMA1_CONFIG,val) -#define bfin_read_DMA1_NEXT_DESC_PTR() bfin_read32(DMA1_NEXT_DESC_PTR) -#define bfin_write_DMA1_NEXT_DESC_PTR(val) bfin_write32(DMA1_NEXT_DESC_PTR,val) -#define bfin_read_DMA1_START_ADDR() bfin_read32(DMA1_START_ADDR) -#define bfin_write_DMA1_START_ADDR(val) bfin_write32(DMA1_START_ADDR,val) -#define bfin_read_DMA1_X_COUNT() bfin_read16(DMA1_X_COUNT) -#define bfin_write_DMA1_X_COUNT(val) bfin_write16(DMA1_X_COUNT,val) -#define bfin_read_DMA1_Y_COUNT() bfin_read16(DMA1_Y_COUNT) -#define bfin_write_DMA1_Y_COUNT(val) bfin_write16(DMA1_Y_COUNT,val) -#define bfin_read_DMA1_X_MODIFY() bfin_read16(DMA1_X_MODIFY) -#define bfin_write_DMA1_X_MODIFY(val) bfin_write16(DMA1_X_MODIFY,val) -#define bfin_read_DMA1_Y_MODIFY() bfin_read16(DMA1_Y_MODIFY) -#define bfin_write_DMA1_Y_MODIFY(val) bfin_write16(DMA1_Y_MODIFY,val) -#define bfin_read_DMA1_CURR_DESC_PTR() bfin_read32(DMA1_CURR_DESC_PTR) -#define bfin_write_DMA1_CURR_DESC_PTR(val) bfin_write32(DMA1_CURR_DESC_PTR,val) -#define bfin_read_DMA1_CURR_ADDR() bfin_read32(DMA1_CURR_ADDR) -#define bfin_write_DMA1_CURR_ADDR(val) bfin_write32(DMA1_CURR_ADDR,val) -#define bfin_read_DMA1_CURR_X_COUNT() bfin_read16(DMA1_CURR_X_COUNT) -#define bfin_write_DMA1_CURR_X_COUNT(val) bfin_write16(DMA1_CURR_X_COUNT,val) -#define bfin_read_DMA1_CURR_Y_COUNT() bfin_read16(DMA1_CURR_Y_COUNT) -#define bfin_write_DMA1_CURR_Y_COUNT(val) bfin_write16(DMA1_CURR_Y_COUNT,val) -#define bfin_read_DMA1_IRQ_STATUS() bfin_read16(DMA1_IRQ_STATUS) -#define bfin_write_DMA1_IRQ_STATUS(val) bfin_write16(DMA1_IRQ_STATUS,val) -#define bfin_read_DMA1_PERIPHERAL_MAP() bfin_read16(DMA1_PERIPHERAL_MAP) -#define bfin_write_DMA1_PERIPHERAL_MAP(val) bfin_write16(DMA1_PERIPHERAL_MAP,val) - -#define bfin_read_DMA2_CONFIG() bfin_read16(DMA2_CONFIG) -#define bfin_write_DMA2_CONFIG(val) bfin_write16(DMA2_CONFIG,val) -#define bfin_read_DMA2_NEXT_DESC_PTR() bfin_read32(DMA2_NEXT_DESC_PTR) -#define bfin_write_DMA2_NEXT_DESC_PTR(val) bfin_write32(DMA2_NEXT_DESC_PTR,val) -#define bfin_read_DMA2_START_ADDR() bfin_read32(DMA2_START_ADDR) -#define bfin_write_DMA2_START_ADDR(val) bfin_write32(DMA2_START_ADDR,val) -#define bfin_read_DMA2_X_COUNT() bfin_read16(DMA2_X_COUNT) -#define bfin_write_DMA2_X_COUNT(val) bfin_write16(DMA2_X_COUNT,val) -#define bfin_read_DMA2_Y_COUNT() bfin_read16(DMA2_Y_COUNT) -#define bfin_write_DMA2_Y_COUNT(val) bfin_write16(DMA2_Y_COUNT,val) -#define bfin_read_DMA2_X_MODIFY() bfin_read16(DMA2_X_MODIFY) -#define bfin_write_DMA2_X_MODIFY(val) bfin_write16(DMA2_X_MODIFY,val) -#define bfin_read_DMA2_Y_MODIFY() bfin_read16(DMA2_Y_MODIFY) -#define bfin_write_DMA2_Y_MODIFY(val) bfin_write16(DMA2_Y_MODIFY,val) -#define bfin_read_DMA2_CURR_DESC_PTR() bfin_read32(DMA2_CURR_DESC_PTR) -#define bfin_write_DMA2_CURR_DESC_PTR(val) bfin_write32(DMA2_CURR_DESC_PTR,val) -#define bfin_read_DMA2_CURR_ADDR() bfin_read32(DMA2_CURR_ADDR) -#define bfin_write_DMA2_CURR_ADDR(val) bfin_write32(DMA2_CURR_ADDR,val) -#define bfin_read_DMA2_CURR_X_COUNT() bfin_read16(DMA2_CURR_X_COUNT) -#define bfin_write_DMA2_CURR_X_COUNT(val) bfin_write16(DMA2_CURR_X_COUNT,val) -#define bfin_read_DMA2_CURR_Y_COUNT() bfin_read16(DMA2_CURR_Y_COUNT) -#define bfin_write_DMA2_CURR_Y_COUNT(val) bfin_write16(DMA2_CURR_Y_COUNT,val) -#define bfin_read_DMA2_IRQ_STATUS() bfin_read16(DMA2_IRQ_STATUS) -#define bfin_write_DMA2_IRQ_STATUS(val) bfin_write16(DMA2_IRQ_STATUS,val) -#define bfin_read_DMA2_PERIPHERAL_MAP() bfin_read16(DMA2_PERIPHERAL_MAP) -#define bfin_write_DMA2_PERIPHERAL_MAP(val) bfin_write16(DMA2_PERIPHERAL_MAP,val) - -#define bfin_read_DMA3_CONFIG() bfin_read16(DMA3_CONFIG) -#define bfin_write_DMA3_CONFIG(val) bfin_write16(DMA3_CONFIG,val) -#define bfin_read_DMA3_NEXT_DESC_PTR() bfin_read32(DMA3_NEXT_DESC_PTR) -#define bfin_write_DMA3_NEXT_DESC_PTR(val) bfin_write32(DMA3_NEXT_DESC_PTR,val) -#define bfin_read_DMA3_START_ADDR() bfin_read32(DMA3_START_ADDR) -#define bfin_write_DMA3_START_ADDR(val) bfin_write32(DMA3_START_ADDR,val) -#define bfin_read_DMA3_X_COUNT() bfin_read16(DMA3_X_COUNT) -#define bfin_write_DMA3_X_COUNT(val) bfin_write16(DMA3_X_COUNT,val) -#define bfin_read_DMA3_Y_COUNT() bfin_read16(DMA3_Y_COUNT) -#define bfin_write_DMA3_Y_COUNT(val) bfin_write16(DMA3_Y_COUNT,val) -#define bfin_read_DMA3_X_MODIFY() bfin_read16(DMA3_X_MODIFY) -#define bfin_write_DMA3_X_MODIFY(val) bfin_write16(DMA3_X_MODIFY,val) -#define bfin_read_DMA3_Y_MODIFY() bfin_read16(DMA3_Y_MODIFY) -#define bfin_write_DMA3_Y_MODIFY(val) bfin_write16(DMA3_Y_MODIFY,val) -#define bfin_read_DMA3_CURR_DESC_PTR() bfin_read32(DMA3_CURR_DESC_PTR) -#define bfin_write_DMA3_CURR_DESC_PTR(val) bfin_write32(DMA3_CURR_DESC_PTR,val) -#define bfin_read_DMA3_CURR_ADDR() bfin_read32(DMA3_CURR_ADDR) -#define bfin_write_DMA3_CURR_ADDR(val) bfin_write32(DMA3_CURR_ADDR,val) -#define bfin_read_DMA3_CURR_X_COUNT() bfin_read16(DMA3_CURR_X_COUNT) -#define bfin_write_DMA3_CURR_X_COUNT(val) bfin_write16(DMA3_CURR_X_COUNT,val) -#define bfin_read_DMA3_CURR_Y_COUNT() bfin_read16(DMA3_CURR_Y_COUNT) -#define bfin_write_DMA3_CURR_Y_COUNT(val) bfin_write16(DMA3_CURR_Y_COUNT,val) -#define bfin_read_DMA3_IRQ_STATUS() bfin_read16(DMA3_IRQ_STATUS) -#define bfin_write_DMA3_IRQ_STATUS(val) bfin_write16(DMA3_IRQ_STATUS,val) -#define bfin_read_DMA3_PERIPHERAL_MAP() bfin_read16(DMA3_PERIPHERAL_MAP) -#define bfin_write_DMA3_PERIPHERAL_MAP(val) bfin_write16(DMA3_PERIPHERAL_MAP,val) - -#define bfin_read_DMA4_CONFIG() bfin_read16(DMA4_CONFIG) -#define bfin_write_DMA4_CONFIG(val) bfin_write16(DMA4_CONFIG,val) -#define bfin_read_DMA4_NEXT_DESC_PTR() bfin_read32(DMA4_NEXT_DESC_PTR) -#define bfin_write_DMA4_NEXT_DESC_PTR(val) bfin_write32(DMA4_NEXT_DESC_PTR,val) -#define bfin_read_DMA4_START_ADDR() bfin_read32(DMA4_START_ADDR) -#define bfin_write_DMA4_START_ADDR(val) bfin_write32(DMA4_START_ADDR,val) -#define bfin_read_DMA4_X_COUNT() bfin_read16(DMA4_X_COUNT) -#define bfin_write_DMA4_X_COUNT(val) bfin_write16(DMA4_X_COUNT,val) -#define bfin_read_DMA4_Y_COUNT() bfin_read16(DMA4_Y_COUNT) -#define bfin_write_DMA4_Y_COUNT(val) bfin_write16(DMA4_Y_COUNT,val) -#define bfin_read_DMA4_X_MODIFY() bfin_read16(DMA4_X_MODIFY) -#define bfin_write_DMA4_X_MODIFY(val) bfin_write16(DMA4_X_MODIFY,val) -#define bfin_read_DMA4_Y_MODIFY() bfin_read16(DMA4_Y_MODIFY) -#define bfin_write_DMA4_Y_MODIFY(val) bfin_write16(DMA4_Y_MODIFY,val) -#define bfin_read_DMA4_CURR_DESC_PTR() bfin_read32(DMA4_CURR_DESC_PTR) -#define bfin_write_DMA4_CURR_DESC_PTR(val) bfin_write32(DMA4_CURR_DESC_PTR,val) -#define bfin_read_DMA4_CURR_ADDR() bfin_read32(DMA4_CURR_ADDR) -#define bfin_write_DMA4_CURR_ADDR(val) bfin_write32(DMA4_CURR_ADDR,val) -#define bfin_read_DMA4_CURR_X_COUNT() bfin_read16(DMA4_CURR_X_COUNT) -#define bfin_write_DMA4_CURR_X_COUNT(val) bfin_write16(DMA4_CURR_X_COUNT,val) -#define bfin_read_DMA4_CURR_Y_COUNT() bfin_read16(DMA4_CURR_Y_COUNT) -#define bfin_write_DMA4_CURR_Y_COUNT(val) bfin_write16(DMA4_CURR_Y_COUNT,val) -#define bfin_read_DMA4_IRQ_STATUS() bfin_read16(DMA4_IRQ_STATUS) -#define bfin_write_DMA4_IRQ_STATUS(val) bfin_write16(DMA4_IRQ_STATUS,val) -#define bfin_read_DMA4_PERIPHERAL_MAP() bfin_read16(DMA4_PERIPHERAL_MAP) -#define bfin_write_DMA4_PERIPHERAL_MAP(val) bfin_write16(DMA4_PERIPHERAL_MAP,val) - -#define bfin_read_DMA5_CONFIG() bfin_read16(DMA5_CONFIG) -#define bfin_write_DMA5_CONFIG(val) bfin_write16(DMA5_CONFIG,val) -#define bfin_read_DMA5_NEXT_DESC_PTR() bfin_read32(DMA5_NEXT_DESC_PTR) -#define bfin_write_DMA5_NEXT_DESC_PTR(val) bfin_write32(DMA5_NEXT_DESC_PTR,val) -#define bfin_read_DMA5_START_ADDR() bfin_read32(DMA5_START_ADDR) -#define bfin_write_DMA5_START_ADDR(val) bfin_write32(DMA5_START_ADDR,val) -#define bfin_read_DMA5_X_COUNT() bfin_read16(DMA5_X_COUNT) -#define bfin_write_DMA5_X_COUNT(val) bfin_write16(DMA5_X_COUNT,val) -#define bfin_read_DMA5_Y_COUNT() bfin_read16(DMA5_Y_COUNT) -#define bfin_write_DMA5_Y_COUNT(val) bfin_write16(DMA5_Y_COUNT,val) -#define bfin_read_DMA5_X_MODIFY() bfin_read16(DMA5_X_MODIFY) -#define bfin_write_DMA5_X_MODIFY(val) bfin_write16(DMA5_X_MODIFY,val) -#define bfin_read_DMA5_Y_MODIFY() bfin_read16(DMA5_Y_MODIFY) -#define bfin_write_DMA5_Y_MODIFY(val) bfin_write16(DMA5_Y_MODIFY,val) -#define bfin_read_DMA5_CURR_DESC_PTR() bfin_read32(DMA5_CURR_DESC_PTR) -#define bfin_write_DMA5_CURR_DESC_PTR(val) bfin_write32(DMA5_CURR_DESC_PTR,val) -#define bfin_read_DMA5_CURR_ADDR() bfin_read32(DMA5_CURR_ADDR) -#define bfin_write_DMA5_CURR_ADDR(val) bfin_write32(DMA5_CURR_ADDR,val) -#define bfin_read_DMA5_CURR_X_COUNT() bfin_read16(DMA5_CURR_X_COUNT) -#define bfin_write_DMA5_CURR_X_COUNT(val) bfin_write16(DMA5_CURR_X_COUNT,val) -#define bfin_read_DMA5_CURR_Y_COUNT() bfin_read16(DMA5_CURR_Y_COUNT) -#define bfin_write_DMA5_CURR_Y_COUNT(val) bfin_write16(DMA5_CURR_Y_COUNT,val) -#define bfin_read_DMA5_IRQ_STATUS() bfin_read16(DMA5_IRQ_STATUS) -#define bfin_write_DMA5_IRQ_STATUS(val) bfin_write16(DMA5_IRQ_STATUS,val) -#define bfin_read_DMA5_PERIPHERAL_MAP() bfin_read16(DMA5_PERIPHERAL_MAP) -#define bfin_write_DMA5_PERIPHERAL_MAP(val) bfin_write16(DMA5_PERIPHERAL_MAP,val) - -#define bfin_read_DMA6_CONFIG() bfin_read16(DMA6_CONFIG) -#define bfin_write_DMA6_CONFIG(val) bfin_write16(DMA6_CONFIG,val) -#define bfin_read_DMA6_NEXT_DESC_PTR() bfin_read32(DMA6_NEXT_DESC_PTR) -#define bfin_write_DMA6_NEXT_DESC_PTR(val) bfin_write32(DMA6_NEXT_DESC_PTR,val) -#define bfin_read_DMA6_START_ADDR() bfin_read32(DMA6_START_ADDR) -#define bfin_write_DMA6_START_ADDR(val) bfin_write32(DMA6_START_ADDR,val) -#define bfin_read_DMA6_X_COUNT() bfin_read16(DMA6_X_COUNT) -#define bfin_write_DMA6_X_COUNT(val) bfin_write16(DMA6_X_COUNT,val) -#define bfin_read_DMA6_Y_COUNT() bfin_read16(DMA6_Y_COUNT) -#define bfin_write_DMA6_Y_COUNT(val) bfin_write16(DMA6_Y_COUNT,val) -#define bfin_read_DMA6_X_MODIFY() bfin_read16(DMA6_X_MODIFY) -#define bfin_write_DMA6_X_MODIFY(val) bfin_write16(DMA6_X_MODIFY,val) -#define bfin_read_DMA6_Y_MODIFY() bfin_read16(DMA6_Y_MODIFY) -#define bfin_write_DMA6_Y_MODIFY(val) bfin_write16(DMA6_Y_MODIFY,val) -#define bfin_read_DMA6_CURR_DESC_PTR() bfin_read32(DMA6_CURR_DESC_PTR) -#define bfin_write_DMA6_CURR_DESC_PTR(val) bfin_write32(DMA6_CURR_DESC_PTR,val) -#define bfin_read_DMA6_CURR_ADDR() bfin_read32(DMA6_CURR_ADDR) -#define bfin_write_DMA6_CURR_ADDR(val) bfin_write32(DMA6_CURR_ADDR,val) -#define bfin_read_DMA6_CURR_X_COUNT() bfin_read16(DMA6_CURR_X_COUNT) -#define bfin_write_DMA6_CURR_X_COUNT(val) bfin_write16(DMA6_CURR_X_COUNT,val) -#define bfin_read_DMA6_CURR_Y_COUNT() bfin_read16(DMA6_CURR_Y_COUNT) -#define bfin_write_DMA6_CURR_Y_COUNT(val) bfin_write16(DMA6_CURR_Y_COUNT,val) -#define bfin_read_DMA6_IRQ_STATUS() bfin_read16(DMA6_IRQ_STATUS) -#define bfin_write_DMA6_IRQ_STATUS(val) bfin_write16(DMA6_IRQ_STATUS,val) -#define bfin_read_DMA6_PERIPHERAL_MAP() bfin_read16(DMA6_PERIPHERAL_MAP) -#define bfin_write_DMA6_PERIPHERAL_MAP(val) bfin_write16(DMA6_PERIPHERAL_MAP,val) - -#define bfin_read_DMA7_CONFIG() bfin_read16(DMA7_CONFIG) -#define bfin_write_DMA7_CONFIG(val) bfin_write16(DMA7_CONFIG,val) -#define bfin_read_DMA7_NEXT_DESC_PTR() bfin_read32(DMA7_NEXT_DESC_PTR) -#define bfin_write_DMA7_NEXT_DESC_PTR(val) bfin_write32(DMA7_NEXT_DESC_PTR,val) -#define bfin_read_DMA7_START_ADDR() bfin_read32(DMA7_START_ADDR) -#define bfin_write_DMA7_START_ADDR(val) bfin_write32(DMA7_START_ADDR,val) -#define bfin_read_DMA7_X_COUNT() bfin_read16(DMA7_X_COUNT) -#define bfin_write_DMA7_X_COUNT(val) bfin_write16(DMA7_X_COUNT,val) -#define bfin_read_DMA7_Y_COUNT() bfin_read16(DMA7_Y_COUNT) -#define bfin_write_DMA7_Y_COUNT(val) bfin_write16(DMA7_Y_COUNT,val) -#define bfin_read_DMA7_X_MODIFY() bfin_read16(DMA7_X_MODIFY) -#define bfin_write_DMA7_X_MODIFY(val) bfin_write16(DMA7_X_MODIFY,val) -#define bfin_read_DMA7_Y_MODIFY() bfin_read16(DMA7_Y_MODIFY) -#define bfin_write_DMA7_Y_MODIFY(val) bfin_write16(DMA7_Y_MODIFY,val) -#define bfin_read_DMA7_CURR_DESC_PTR() bfin_read32(DMA7_CURR_DESC_PTR) -#define bfin_write_DMA7_CURR_DESC_PTR(val) bfin_write32(DMA7_CURR_DESC_PTR,val) -#define bfin_read_DMA7_CURR_ADDR() bfin_read32(DMA7_CURR_ADDR) -#define bfin_write_DMA7_CURR_ADDR(val) bfin_write32(DMA7_CURR_ADDR,val) -#define bfin_read_DMA7_CURR_X_COUNT() bfin_read16(DMA7_CURR_X_COUNT) -#define bfin_write_DMA7_CURR_X_COUNT(val) bfin_write16(DMA7_CURR_X_COUNT,val) -#define bfin_read_DMA7_CURR_Y_COUNT() bfin_read16(DMA7_CURR_Y_COUNT) -#define bfin_write_DMA7_CURR_Y_COUNT(val) bfin_write16(DMA7_CURR_Y_COUNT,val) -#define bfin_read_DMA7_IRQ_STATUS() bfin_read16(DMA7_IRQ_STATUS) -#define bfin_write_DMA7_IRQ_STATUS(val) bfin_write16(DMA7_IRQ_STATUS,val) -#define bfin_read_DMA7_PERIPHERAL_MAP() bfin_read16(DMA7_PERIPHERAL_MAP) -#define bfin_write_DMA7_PERIPHERAL_MAP(val) bfin_write16(DMA7_PERIPHERAL_MAP,val) - -#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG) -#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG,val) -#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR) -#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR,val) -#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR) -#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR,val) -#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT) -#define bfin_write_MDMA_D1_X_COUNT(val) bfin_write16(MDMA_D1_X_COUNT,val) -#define bfin_read_MDMA_D1_Y_COUNT() bfin_read16(MDMA_D1_Y_COUNT) -#define bfin_write_MDMA_D1_Y_COUNT(val) bfin_write16(MDMA_D1_Y_COUNT,val) -#define bfin_read_MDMA_D1_X_MODIFY() bfin_read16(MDMA_D1_X_MODIFY) -#define bfin_write_MDMA_D1_X_MODIFY(val) bfin_write16(MDMA_D1_X_MODIFY,val) -#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY) -#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY,val) -#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR) -#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR,val) -#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR) -#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR,val) -#define bfin_read_MDMA_D1_CURR_X_COUNT() bfin_read16(MDMA_D1_CURR_X_COUNT) -#define bfin_write_MDMA_D1_CURR_X_COUNT(val) bfin_write16(MDMA_D1_CURR_X_COUNT,val) -#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT) -#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT,val) -#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS) -#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS,val) -#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP) -#define bfin_write_MDMA_D1_PERIPHERAL_MAP(val) bfin_write16(MDMA_D1_PERIPHERAL_MAP,val) - -#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG) -#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG,val) -#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR) -#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR,val) -#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR) -#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR,val) -#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT) -#define bfin_write_MDMA_S1_X_COUNT(val) bfin_write16(MDMA_S1_X_COUNT,val) -#define bfin_read_MDMA_S1_Y_COUNT() bfin_read16(MDMA_S1_Y_COUNT) -#define bfin_write_MDMA_S1_Y_COUNT(val) bfin_write16(MDMA_S1_Y_COUNT,val) -#define bfin_read_MDMA_S1_X_MODIFY() bfin_read16(MDMA_S1_X_MODIFY) -#define bfin_write_MDMA_S1_X_MODIFY(val) bfin_write16(MDMA_S1_X_MODIFY,val) -#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY) -#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY,val) -#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR) -#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR,val) -#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR) -#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR,val) -#define bfin_read_MDMA_S1_CURR_X_COUNT() bfin_read16(MDMA_S1_CURR_X_COUNT) -#define bfin_write_MDMA_S1_CURR_X_COUNT(val) bfin_write16(MDMA_S1_CURR_X_COUNT,val) -#define bfin_read_MDMA_S1_CURR_Y_COUNT() bfin_read16(MDMA_S1_CURR_Y_COUNT) -#define bfin_write_MDMA_S1_CURR_Y_COUNT(val) bfin_write16(MDMA_S1_CURR_Y_COUNT,val) -#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS) -#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS,val) -#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP) -#define bfin_write_MDMA_S1_PERIPHERAL_MAP(val) bfin_write16(MDMA_S1_PERIPHERAL_MAP,val) - -#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG) -#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG,val) -#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR) -#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR,val) -#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR) -#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR,val) -#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT) -#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT,val) -#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT) -#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT,val) -#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY) -#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY,val) -#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY) -#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY,val) -#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR) -#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR,val) -#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR) -#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR,val) -#define bfin_read_MDMA_D0_CURR_X_COUNT() bfin_read16(MDMA_D0_CURR_X_COUNT) -#define bfin_write_MDMA_D0_CURR_X_COUNT(val) bfin_write16(MDMA_D0_CURR_X_COUNT,val) -#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT) -#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT,val) -#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS) -#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS,val) -#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP) -#define bfin_write_MDMA_D0_PERIPHERAL_MAP(val) bfin_write16(MDMA_D0_PERIPHERAL_MAP,val) - -#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG) -#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG,val) -#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR) -#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR,val) -#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR) -#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR,val) -#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT) -#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT,val) -#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT) -#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT,val) -#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY) -#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY,val) -#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY) -#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY,val) -#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR) -#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR,val) -#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR) -#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR,val) -#define bfin_read_MDMA_S0_CURR_X_COUNT() bfin_read16(MDMA_S0_CURR_X_COUNT) -#define bfin_write_MDMA_S0_CURR_X_COUNT(val) bfin_write16(MDMA_S0_CURR_X_COUNT,val) -#define bfin_read_MDMA_S0_CURR_Y_COUNT() bfin_read16(MDMA_S0_CURR_Y_COUNT) -#define bfin_write_MDMA_S0_CURR_Y_COUNT(val) bfin_write16(MDMA_S0_CURR_Y_COUNT,val) -#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS) -#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS,val) -#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP) -#define bfin_write_MDMA_S0_PERIPHERAL_MAP(val) bfin_write16(MDMA_S0_PERIPHERAL_MAP,val) - -/* Aysnchronous Memory Controller - External Bus Interface Unit (0xFFC0 3C00-0xFFC0 3FFF) */ -#define bfin_read_EBIU_AMGCTL() bfin_read16(EBIU_AMGCTL) -#define bfin_write_EBIU_AMGCTL(val) bfin_write16(EBIU_AMGCTL,val) -#define bfin_read_EBIU_AMBCTL0() bfin_read32(EBIU_AMBCTL0) -#define bfin_write_EBIU_AMBCTL0(val) bfin_write32(EBIU_AMBCTL0,val) -#define bfin_read_EBIU_AMBCTL1() bfin_read32(EBIU_AMBCTL1) -#define bfin_write_EBIU_AMBCTL1(val) bfin_write32(EBIU_AMBCTL1,val) - -/* SDRAM Controller External Bus Interface Unit (0xFFC0 4C00-0xFFC0 4FFF) */ -#define bfin_read_EBIU_SDGCTL() bfin_read32(EBIU_SDGCTL) -#define bfin_write_EBIU_SDGCTL(val) bfin_write32(EBIU_SDGCTL,val) -#define bfin_read_EBIU_SDRRC() bfin_read16(EBIU_SDRRC) -#define bfin_write_EBIU_SDRRC(val) bfin_write16(EBIU_SDRRC,val) -#define bfin_read_EBIU_SDSTAT() bfin_read16(EBIU_SDSTAT) -#define bfin_write_EBIU_SDSTAT(val) bfin_write16(EBIU_SDSTAT,val) -#define bfin_read_EBIU_SDBCTL() bfin_read16(EBIU_SDBCTL) -#define bfin_write_EBIU_SDBCTL(val) bfin_write16(EBIU_SDBCTL,val) - -/* UART Controller */ -#define bfin_read_UART_THR() bfin_read16(UART_THR) -#define bfin_write_UART_THR(val) bfin_write16(UART_THR,val) -#define bfin_read_UART_RBR() bfin_read16(UART_RBR) -#define bfin_write_UART_RBR(val) bfin_write16(UART_RBR,val) -#define bfin_read_UART_DLL() bfin_read16(UART_DLL) -#define bfin_write_UART_DLL(val) bfin_write16(UART_DLL,val) -#define bfin_read_UART_IER() bfin_read16(UART_IER) -#define bfin_write_UART_IER(val) bfin_write16(UART_IER,val) -#define bfin_read_UART_DLH() bfin_read16(UART_DLH) -#define bfin_write_UART_DLH(val) bfin_write16(UART_DLH,val) -#define bfin_read_UART_IIR() bfin_read16(UART_IIR) -#define bfin_write_UART_IIR(val) bfin_write16(UART_IIR,val) -#define bfin_read_UART_LCR() bfin_read16(UART_LCR) -#define bfin_write_UART_LCR(val) bfin_write16(UART_LCR,val) -#define bfin_read_UART_MCR() bfin_read16(UART_MCR) -#define bfin_write_UART_MCR(val) bfin_write16(UART_MCR,val) -#define bfin_read_UART_LSR() bfin_read16(UART_LSR) -#define bfin_write_UART_LSR(val) bfin_write16(UART_LSR,val) -/* -#define UART_MSR -*/ -#define bfin_read_UART_SCR() bfin_read16(UART_SCR) -#define bfin_write_UART_SCR(val) bfin_write16(UART_SCR,val) -#define bfin_read_UART_GCTL() bfin_read16(UART_GCTL) -#define bfin_write_UART_GCTL(val) bfin_write16(UART_GCTL,val) - -/* SPI Controller */ -#define bfin_read_SPI_CTL() bfin_read16(SPI_CTL) -#define bfin_write_SPI_CTL(val) bfin_write16(SPI_CTL,val) -#define bfin_read_SPI_FLG() bfin_read16(SPI_FLG) -#define bfin_write_SPI_FLG(val) bfin_write16(SPI_FLG,val) -#define bfin_read_SPI_STAT() bfin_read16(SPI_STAT) -#define bfin_write_SPI_STAT(val) bfin_write16(SPI_STAT,val) -#define bfin_read_SPI_TDBR() bfin_read16(SPI_TDBR) -#define bfin_write_SPI_TDBR(val) bfin_write16(SPI_TDBR,val) -#define bfin_read_SPI_RDBR() bfin_read16(SPI_RDBR) -#define bfin_write_SPI_RDBR(val) bfin_write16(SPI_RDBR,val) -#define bfin_read_SPI_BAUD() bfin_read16(SPI_BAUD) -#define bfin_write_SPI_BAUD(val) bfin_write16(SPI_BAUD,val) -#define bfin_read_SPI_SHADOW() bfin_read16(SPI_SHADOW) -#define bfin_write_SPI_SHADOW(val) bfin_write16(SPI_SHADOW,val) - -/* TIMER 0, 1, 2 Registers */ -#define bfin_read_TIMER0_CONFIG() bfin_read16(TIMER0_CONFIG) -#define bfin_write_TIMER0_CONFIG(val) bfin_write16(TIMER0_CONFIG,val) -#define bfin_read_TIMER0_COUNTER() bfin_read32(TIMER0_COUNTER) -#define bfin_write_TIMER0_COUNTER(val) bfin_write32(TIMER0_COUNTER,val) -#define bfin_read_TIMER0_PERIOD() bfin_read32(TIMER0_PERIOD) -#define bfin_write_TIMER0_PERIOD(val) bfin_write32(TIMER0_PERIOD,val) -#define bfin_read_TIMER0_WIDTH() bfin_read32(TIMER0_WIDTH) -#define bfin_write_TIMER0_WIDTH(val) bfin_write32(TIMER0_WIDTH,val) - -#define bfin_read_TIMER1_CONFIG() bfin_read16(TIMER1_CONFIG) -#define bfin_write_TIMER1_CONFIG(val) bfin_write16(TIMER1_CONFIG,val) -#define bfin_read_TIMER1_COUNTER() bfin_read32(TIMER1_COUNTER) -#define bfin_write_TIMER1_COUNTER(val) bfin_write32(TIMER1_COUNTER,val) -#define bfin_read_TIMER1_PERIOD() bfin_read32(TIMER1_PERIOD) -#define bfin_write_TIMER1_PERIOD(val) bfin_write32(TIMER1_PERIOD,val) -#define bfin_read_TIMER1_WIDTH() bfin_read32(TIMER1_WIDTH) -#define bfin_write_TIMER1_WIDTH(val) bfin_write32(TIMER1_WIDTH,val) - -#define bfin_read_TIMER2_CONFIG() bfin_read16(TIMER2_CONFIG) -#define bfin_write_TIMER2_CONFIG(val) bfin_write16(TIMER2_CONFIG,val) -#define bfin_read_TIMER2_COUNTER() bfin_read32(TIMER2_COUNTER) -#define bfin_write_TIMER2_COUNTER(val) bfin_write32(TIMER2_COUNTER,val) -#define bfin_read_TIMER2_PERIOD() bfin_read32(TIMER2_PERIOD) -#define bfin_write_TIMER2_PERIOD(val) bfin_write32(TIMER2_PERIOD,val) -#define bfin_read_TIMER2_WIDTH() bfin_read32(TIMER2_WIDTH) -#define bfin_write_TIMER2_WIDTH(val) bfin_write32(TIMER2_WIDTH,val) - -#define bfin_read_TIMER_ENABLE() bfin_read16(TIMER_ENABLE) -#define bfin_write_TIMER_ENABLE(val) bfin_write16(TIMER_ENABLE,val) -#define bfin_read_TIMER_DISABLE() bfin_read16(TIMER_DISABLE) -#define bfin_write_TIMER_DISABLE(val) bfin_write16(TIMER_DISABLE,val) -#define bfin_read_TIMER_STATUS() bfin_read16(TIMER_STATUS) -#define bfin_write_TIMER_STATUS(val) bfin_write16(TIMER_STATUS,val) - -/* SPORT0 Controller */ -#define bfin_read_SPORT0_TCR1() bfin_read16(SPORT0_TCR1) -#define bfin_write_SPORT0_TCR1(val) bfin_write16(SPORT0_TCR1,val) -#define bfin_read_SPORT0_TCR2() bfin_read16(SPORT0_TCR2) -#define bfin_write_SPORT0_TCR2(val) bfin_write16(SPORT0_TCR2,val) -#define bfin_read_SPORT0_TCLKDIV() bfin_read16(SPORT0_TCLKDIV) -#define bfin_write_SPORT0_TCLKDIV(val) bfin_write16(SPORT0_TCLKDIV,val) -#define bfin_read_SPORT0_TFSDIV() bfin_read16(SPORT0_TFSDIV) -#define bfin_write_SPORT0_TFSDIV(val) bfin_write16(SPORT0_TFSDIV,val) -#define bfin_read_SPORT0_TX() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX(val) bfin_write32(SPORT0_TX,val) -#define bfin_read_SPORT0_RX() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX(val) bfin_write32(SPORT0_RX,val) -#define bfin_read_SPORT0_TX32() bfin_read32(SPORT0_TX) -#define bfin_write_SPORT0_TX32(val) bfin_write32(SPORT0_TX,val) -#define bfin_read_SPORT0_RX32() bfin_read32(SPORT0_RX) -#define bfin_write_SPORT0_RX32(val) bfin_write32(SPORT0_RX,val) -#define bfin_read_SPORT0_TX16() bfin_read16(SPORT0_TX) -#define bfin_write_SPORT0_TX16(val) bfin_write16(SPORT0_TX,val) -#define bfin_read_SPORT0_RX16() bfin_read16(SPORT0_RX) -#define bfin_write_SPORT0_RX16(val) bfin_write16(SPORT0_RX,val) -#define bfin_read_SPORT0_RCR1() bfin_read16(SPORT0_RCR1) -#define bfin_write_SPORT0_RCR1(val) bfin_write16(SPORT0_RCR1,val) -#define bfin_read_SPORT0_RCR2() bfin_read16(SPORT0_RCR2) -#define bfin_write_SPORT0_RCR2(val) bfin_write16(SPORT0_RCR2,val) -#define bfin_read_SPORT0_RCLKDIV() bfin_read16(SPORT0_RCLKDIV) -#define bfin_write_SPORT0_RCLKDIV(val) bfin_write16(SPORT0_RCLKDIV,val) -#define bfin_read_SPORT0_RFSDIV() bfin_read16(SPORT0_RFSDIV) -#define bfin_write_SPORT0_RFSDIV(val) bfin_write16(SPORT0_RFSDIV,val) -#define bfin_read_SPORT0_STAT() bfin_read16(SPORT0_STAT) -#define bfin_write_SPORT0_STAT(val) bfin_write16(SPORT0_STAT,val) -#define bfin_read_SPORT0_CHNL() bfin_read16(SPORT0_CHNL) -#define bfin_write_SPORT0_CHNL(val) bfin_write16(SPORT0_CHNL,val) -#define bfin_read_SPORT0_MCMC1() bfin_read16(SPORT0_MCMC1) -#define bfin_write_SPORT0_MCMC1(val) bfin_write16(SPORT0_MCMC1,val) -#define bfin_read_SPORT0_MCMC2() bfin_read16(SPORT0_MCMC2) -#define bfin_write_SPORT0_MCMC2(val) bfin_write16(SPORT0_MCMC2,val) -#define bfin_read_SPORT0_MTCS0() bfin_read32(SPORT0_MTCS0) -#define bfin_write_SPORT0_MTCS0(val) bfin_write32(SPORT0_MTCS0,val) -#define bfin_read_SPORT0_MTCS1() bfin_read32(SPORT0_MTCS1) -#define bfin_write_SPORT0_MTCS1(val) bfin_write32(SPORT0_MTCS1,val) -#define bfin_read_SPORT0_MTCS2() bfin_read32(SPORT0_MTCS2) -#define bfin_write_SPORT0_MTCS2(val) bfin_write32(SPORT0_MTCS2,val) -#define bfin_read_SPORT0_MTCS3() bfin_read32(SPORT0_MTCS3) -#define bfin_write_SPORT0_MTCS3(val) bfin_write32(SPORT0_MTCS3,val) -#define bfin_read_SPORT0_MRCS0() bfin_read32(SPORT0_MRCS0) -#define bfin_write_SPORT0_MRCS0(val) bfin_write32(SPORT0_MRCS0,val) -#define bfin_read_SPORT0_MRCS1() bfin_read32(SPORT0_MRCS1) -#define bfin_write_SPORT0_MRCS1(val) bfin_write32(SPORT0_MRCS1,val) -#define bfin_read_SPORT0_MRCS2() bfin_read32(SPORT0_MRCS2) -#define bfin_write_SPORT0_MRCS2(val) bfin_write32(SPORT0_MRCS2,val) -#define bfin_read_SPORT0_MRCS3() bfin_read32(SPORT0_MRCS3) -#define bfin_write_SPORT0_MRCS3(val) bfin_write32(SPORT0_MRCS3,val) - -/* SPORT1 Controller */ -#define bfin_read_SPORT1_TCR1() bfin_read16(SPORT1_TCR1) -#define bfin_write_SPORT1_TCR1(val) bfin_write16(SPORT1_TCR1,val) -#define bfin_read_SPORT1_TCR2() bfin_read16(SPORT1_TCR2) -#define bfin_write_SPORT1_TCR2(val) bfin_write16(SPORT1_TCR2,val) -#define bfin_read_SPORT1_TCLKDIV() bfin_read16(SPORT1_TCLKDIV) -#define bfin_write_SPORT1_TCLKDIV(val) bfin_write16(SPORT1_TCLKDIV,val) -#define bfin_read_SPORT1_TFSDIV() bfin_read16(SPORT1_TFSDIV) -#define bfin_write_SPORT1_TFSDIV(val) bfin_write16(SPORT1_TFSDIV,val) -#define bfin_read_SPORT1_TX() bfin_read32(SPORT1_TX) -#define bfin_write_SPORT1_TX(val) bfin_write32(SPORT1_TX,val) -#define bfin_read_SPORT1_RX() bfin_read32(SPORT1_RX) -#define bfin_write_SPORT1_RX(val) bfin_write32(SPORT1_RX,val) -#define bfin_read_SPORT1_TX32() bfin_read32(SPORT1_TX) -#define bfin_write_SPORT1_TX32(val) bfin_write32(SPORT1_TX,val) -#define bfin_read_SPORT1_RX32() bfin_read32(SPORT1_RX) -#define bfin_write_SPORT1_RX32(val) bfin_write32(SPORT1_RX,val) -#define bfin_read_SPORT1_TX16() bfin_read16(SPORT1_TX) -#define bfin_write_SPORT1_TX16(val) bfin_write16(SPORT1_TX,val) -#define bfin_read_SPORT1_RX16() bfin_read16(SPORT1_RX) -#define bfin_write_SPORT1_RX16(val) bfin_write16(SPORT1_RX,val) -#define bfin_read_SPORT1_RCR1() bfin_read16(SPORT1_RCR1) -#define bfin_write_SPORT1_RCR1(val) bfin_write16(SPORT1_RCR1,val) -#define bfin_read_SPORT1_RCR2() bfin_read16(SPORT1_RCR2) -#define bfin_write_SPORT1_RCR2(val) bfin_write16(SPORT1_RCR2,val) -#define bfin_read_SPORT1_RCLKDIV() bfin_read16(SPORT1_RCLKDIV) -#define bfin_write_SPORT1_RCLKDIV(val) bfin_write16(SPORT1_RCLKDIV,val) -#define bfin_read_SPORT1_RFSDIV() bfin_read16(SPORT1_RFSDIV) -#define bfin_write_SPORT1_RFSDIV(val) bfin_write16(SPORT1_RFSDIV,val) -#define bfin_read_SPORT1_STAT() bfin_read16(SPORT1_STAT) -#define bfin_write_SPORT1_STAT(val) bfin_write16(SPORT1_STAT,val) -#define bfin_read_SPORT1_CHNL() bfin_read16(SPORT1_CHNL) -#define bfin_write_SPORT1_CHNL(val) bfin_write16(SPORT1_CHNL,val) -#define bfin_read_SPORT1_MCMC1() bfin_read16(SPORT1_MCMC1) -#define bfin_write_SPORT1_MCMC1(val) bfin_write16(SPORT1_MCMC1,val) -#define bfin_read_SPORT1_MCMC2() bfin_read16(SPORT1_MCMC2) -#define bfin_write_SPORT1_MCMC2(val) bfin_write16(SPORT1_MCMC2,val) -#define bfin_read_SPORT1_MTCS0() bfin_read32(SPORT1_MTCS0) -#define bfin_write_SPORT1_MTCS0(val) bfin_write32(SPORT1_MTCS0,val) -#define bfin_read_SPORT1_MTCS1() bfin_read32(SPORT1_MTCS1) -#define bfin_write_SPORT1_MTCS1(val) bfin_write32(SPORT1_MTCS1,val) -#define bfin_read_SPORT1_MTCS2() bfin_read32(SPORT1_MTCS2) -#define bfin_write_SPORT1_MTCS2(val) bfin_write32(SPORT1_MTCS2,val) -#define bfin_read_SPORT1_MTCS3() bfin_read32(SPORT1_MTCS3) -#define bfin_write_SPORT1_MTCS3(val) bfin_write32(SPORT1_MTCS3,val) -#define bfin_read_SPORT1_MRCS0() bfin_read32(SPORT1_MRCS0) -#define bfin_write_SPORT1_MRCS0(val) bfin_write32(SPORT1_MRCS0,val) -#define bfin_read_SPORT1_MRCS1() bfin_read32(SPORT1_MRCS1) -#define bfin_write_SPORT1_MRCS1(val) bfin_write32(SPORT1_MRCS1,val) -#define bfin_read_SPORT1_MRCS2() bfin_read32(SPORT1_MRCS2) -#define bfin_write_SPORT1_MRCS2(val) bfin_write32(SPORT1_MRCS2,val) -#define bfin_read_SPORT1_MRCS3() bfin_read32(SPORT1_MRCS3) -#define bfin_write_SPORT1_MRCS3(val) bfin_write32(SPORT1_MRCS3,val) - -/* Parallel Peripheral Interface (PPI) */ -#define bfin_read_PPI_CONTROL() bfin_read16(PPI_CONTROL) -#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL,val) -#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS) -#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS,val) -#define bfin_clear_PPI_STATUS() bfin_read_PPI_STATUS() -#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY) -#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY,val) -#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT) -#define bfin_write_PPI_COUNT(val) bfin_write16(PPI_COUNT,val) -#define bfin_read_PPI_FRAME() bfin_read16(PPI_FRAME) -#define bfin_write_PPI_FRAME(val) bfin_write16(PPI_FRAME,val) - -#endif /* _CDEF_BF532_H */ diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/include/asm-blackfin/mach-bf533/defBF532.h deleted file mode 100644 index 0ab4dd7494cf..000000000000 --- a/include/asm-blackfin/mach-bf533/defBF532.h +++ /dev/null @@ -1,1266 +0,0 @@ -/************************************************************************ - * - * This file is subject to the terms and conditions of the GNU Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Non-GPL License also available as part of VisualDSP++ - * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html - * - * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved - * - * This file under source code control, please send bugs or changes to: - * dsptools.support@analog.com - * - ************************************************************************/ -/* - * File: include/asm-blackfin/mach-bf533/defBF532.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ -/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */ - -#ifndef _DEF_BF532_H -#define _DEF_BF532_H - -/* include all Core registers and bit definitions */ -#include <asm/mach-common/def_LPBlackfin.h> - -/*********************************************************************************** */ -/* System MMR Register Map */ -/*********************************************************************************** */ -/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ - -#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */ -#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */ -#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ -#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ -#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ -#define CHIPID 0xFFC00014 /* Chip ID Register */ - -/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ -#define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ -#define SYSCR 0xFFC00104 /* System Configuration registe */ -#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ -#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ -#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ -#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ -#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ -#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ -#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ - -/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ -#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ -#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ -#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ - -/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ -#define RTC_STAT 0xFFC00300 /* RTC Status Register */ -#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ -#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ -#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ -#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ -#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ -#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Register (alternate macro) */ - -/* UART Controller (0xFFC00400 - 0xFFC004FF) */ - -/* - * Because include/linux/serial_reg.h have defined UART_*, - * So we define blackfin uart regs to BFIN_UART_*. - */ -#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */ -#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */ -#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ -#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */ -#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ -#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */ -#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */ -#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */ -#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */ -#if 0 -#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register (UNUSED in ADSP-BF532) */ -#endif -#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */ -#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */ - -/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ -#define SPI0_REGBASE 0xFFC00500 -#define SPI_CTL 0xFFC00500 /* SPI Control Register */ -#define SPI_FLG 0xFFC00504 /* SPI Flag register */ -#define SPI_STAT 0xFFC00508 /* SPI Status register */ -#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ -#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ -#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ -#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ - -/* TIMER 0, 1, 2 Registers (0xFFC00600 - 0xFFC006FF) */ - -#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ -#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ -#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ -#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ - -#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ -#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ -#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ -#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ - -#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ -#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ -#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ -#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ - -#define TIMER_ENABLE 0xFFC00640 /* Timer Enable Register */ -#define TIMER_DISABLE 0xFFC00644 /* Timer Disable Register */ -#define TIMER_STATUS 0xFFC00648 /* Timer Status Register */ - -/* General Purpose IO (0xFFC00700 - 0xFFC007FF) */ - -#define FIO_FLAG_D 0xFFC00700 /* Flag Mask to directly specify state of pins */ -#define FIO_FLAG_C 0xFFC00704 /* Peripheral Interrupt Flag Register (clear) */ -#define FIO_FLAG_S 0xFFC00708 /* Peripheral Interrupt Flag Register (set) */ -#define FIO_FLAG_T 0xFFC0070C /* Flag Mask to directly toggle state of pins */ -#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Register (set directly) */ -#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Register (clear) */ -#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Register (set) */ -#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Register (toggle) */ -#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Register (set directly) */ -#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Register (clear) */ -#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Register (set) */ -#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Register (toggle) */ -#define FIO_DIR 0xFFC00730 /* Peripheral Flag Direction Register */ -#define FIO_POLAR 0xFFC00734 /* Flag Source Polarity Register */ -#define FIO_EDGE 0xFFC00738 /* Flag Source Sensitivity Register */ -#define FIO_BOTH 0xFFC0073C /* Flag Set on BOTH Edges Register */ -#define FIO_INEN 0xFFC00740 /* Flag Input Enable Register */ - -/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ -#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ -#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ -#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ -#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ -#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ -#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ -#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ -#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ -#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ -#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ -#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ -#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ -#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ -#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ -#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ -#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ -#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ -#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ -#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ -#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ - -/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ -#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ -#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ -#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ -#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ -#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ -#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ -#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ -#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ -#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ -#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ -#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ -#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ -#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ -#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ -#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ -#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ -#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ -#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ -#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ -#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ - -/* Asynchronous Memory Controller - External Bus Interface Unit */ -#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ -#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ -#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ - -/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ - -#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ -#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ -#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ -#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ - -/* DMA Traffic controls */ -#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ - -/* Alternate deprecated register names (below) provided for backwards code compatibility */ -#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ -#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ - -/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ -#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ -#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ -#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ -#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ -#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ -#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ -#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ -#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ -#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ -#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ -#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ -#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ -#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ - -#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ -#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ -#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ -#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ -#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ -#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ -#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ -#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ -#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ -#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ -#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ -#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ -#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ - -#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ -#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ -#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ -#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ -#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ -#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ -#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ -#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ -#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ -#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ -#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ -#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ -#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ - -#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ -#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ -#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ -#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ -#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ -#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ -#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ -#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ -#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ -#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ -#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ -#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ -#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ - -#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ -#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ -#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ -#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ -#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ -#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ -#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ -#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ -#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ -#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ -#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ -#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ -#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ - -#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ -#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ -#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ -#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ -#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ -#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ -#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ -#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ -#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ -#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ -#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ -#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ -#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ - -#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ -#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ -#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ -#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ -#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ -#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ -#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ -#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ -#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ -#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ -#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ -#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ -#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ - -#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ -#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ -#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ -#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ -#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ -#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ -#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ -#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ -#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ -#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ -#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ -#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ -#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ - -#define MDMA_D1_CONFIG 0xFFC00E88 /* MemDMA Stream 1 Destination Configuration Register */ -#define MDMA_D1_NEXT_DESC_PTR 0xFFC00E80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ -#define MDMA_D1_START_ADDR 0xFFC00E84 /* MemDMA Stream 1 Destination Start Address Register */ -#define MDMA_D1_X_COUNT 0xFFC00E90 /* MemDMA Stream 1 Destination X Count Register */ -#define MDMA_D1_Y_COUNT 0xFFC00E98 /* MemDMA Stream 1 Destination Y Count Register */ -#define MDMA_D1_X_MODIFY 0xFFC00E94 /* MemDMA Stream 1 Destination X Modify Register */ -#define MDMA_D1_Y_MODIFY 0xFFC00E9C /* MemDMA Stream 1 Destination Y Modify Register */ -#define MDMA_D1_CURR_DESC_PTR 0xFFC00EA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ -#define MDMA_D1_CURR_ADDR 0xFFC00EA4 /* MemDMA Stream 1 Destination Current Address Register */ -#define MDMA_D1_CURR_X_COUNT 0xFFC00EB0 /* MemDMA Stream 1 Destination Current X Count Register */ -#define MDMA_D1_CURR_Y_COUNT 0xFFC00EB8 /* MemDMA Stream 1 Destination Current Y Count Register */ -#define MDMA_D1_IRQ_STATUS 0xFFC00EA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ -#define MDMA_D1_PERIPHERAL_MAP 0xFFC00EAC /* MemDMA Stream 1 Destination Peripheral Map Register */ - -#define MDMA_S1_CONFIG 0xFFC00EC8 /* MemDMA Stream 1 Source Configuration Register */ -#define MDMA_S1_NEXT_DESC_PTR 0xFFC00EC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ -#define MDMA_S1_START_ADDR 0xFFC00EC4 /* MemDMA Stream 1 Source Start Address Register */ -#define MDMA_S1_X_COUNT 0xFFC00ED0 /* MemDMA Stream 1 Source X Count Register */ -#define MDMA_S1_Y_COUNT 0xFFC00ED8 /* MemDMA Stream 1 Source Y Count Register */ -#define MDMA_S1_X_MODIFY 0xFFC00ED4 /* MemDMA Stream 1 Source X Modify Register */ -#define MDMA_S1_Y_MODIFY 0xFFC00EDC /* MemDMA Stream 1 Source Y Modify Register */ -#define MDMA_S1_CURR_DESC_PTR 0xFFC00EE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ -#define MDMA_S1_CURR_ADDR 0xFFC00EE4 /* MemDMA Stream 1 Source Current Address Register */ -#define MDMA_S1_CURR_X_COUNT 0xFFC00EF0 /* MemDMA Stream 1 Source Current X Count Register */ -#define MDMA_S1_CURR_Y_COUNT 0xFFC00EF8 /* MemDMA Stream 1 Source Current Y Count Register */ -#define MDMA_S1_IRQ_STATUS 0xFFC00EE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ -#define MDMA_S1_PERIPHERAL_MAP 0xFFC00EEC /* MemDMA Stream 1 Source Peripheral Map Register */ - -#define MDMA_D0_CONFIG 0xFFC00E08 /* MemDMA Stream 0 Destination Configuration Register */ -#define MDMA_D0_NEXT_DESC_PTR 0xFFC00E00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ -#define MDMA_D0_START_ADDR 0xFFC00E04 /* MemDMA Stream 0 Destination Start Address Register */ -#define MDMA_D0_X_COUNT 0xFFC00E10 /* MemDMA Stream 0 Destination X Count Register */ -#define MDMA_D0_Y_COUNT 0xFFC00E18 /* MemDMA Stream 0 Destination Y Count Register */ -#define MDMA_D0_X_MODIFY 0xFFC00E14 /* MemDMA Stream 0 Destination X Modify Register */ -#define MDMA_D0_Y_MODIFY 0xFFC00E1C /* MemDMA Stream 0 Destination Y Modify Register */ -#define MDMA_D0_CURR_DESC_PTR 0xFFC00E20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ -#define MDMA_D0_CURR_ADDR 0xFFC00E24 /* MemDMA Stream 0 Destination Current Address Register */ -#define MDMA_D0_CURR_X_COUNT 0xFFC00E30 /* MemDMA Stream 0 Destination Current X Count Register */ -#define MDMA_D0_CURR_Y_COUNT 0xFFC00E38 /* MemDMA Stream 0 Destination Current Y Count Register */ -#define MDMA_D0_IRQ_STATUS 0xFFC00E28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ -#define MDMA_D0_PERIPHERAL_MAP 0xFFC00E2C /* MemDMA Stream 0 Destination Peripheral Map Register */ - -#define MDMA_S0_CONFIG 0xFFC00E48 /* MemDMA Stream 0 Source Configuration Register */ -#define MDMA_S0_NEXT_DESC_PTR 0xFFC00E40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ -#define MDMA_S0_START_ADDR 0xFFC00E44 /* MemDMA Stream 0 Source Start Address Register */ -#define MDMA_S0_X_COUNT 0xFFC00E50 /* MemDMA Stream 0 Source X Count Register */ -#define MDMA_S0_Y_COUNT 0xFFC00E58 /* MemDMA Stream 0 Source Y Count Register */ -#define MDMA_S0_X_MODIFY 0xFFC00E54 /* MemDMA Stream 0 Source X Modify Register */ -#define MDMA_S0_Y_MODIFY 0xFFC00E5C /* MemDMA Stream 0 Source Y Modify Register */ -#define MDMA_S0_CURR_DESC_PTR 0xFFC00E60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ -#define MDMA_S0_CURR_ADDR 0xFFC00E64 /* MemDMA Stream 0 Source Current Address Register */ -#define MDMA_S0_CURR_X_COUNT 0xFFC00E70 /* MemDMA Stream 0 Source Current X Count Register */ -#define MDMA_S0_CURR_Y_COUNT 0xFFC00E78 /* MemDMA Stream 0 Source Current Y Count Register */ -#define MDMA_S0_IRQ_STATUS 0xFFC00E68 /* MemDMA Stream 0 Source Interrupt/Status Register */ -#define MDMA_S0_PERIPHERAL_MAP 0xFFC00E6C /* MemDMA Stream 0 Source Peripheral Map Register */ - -/* Parallel Peripheral Interface (PPI) (0xFFC01000 - 0xFFC010FF) */ - -#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ -#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ -#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ -#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ -#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ - -/*********************************************************************************** */ -/* System MMR Register Bits */ -/******************************************************************************* */ - -/* ********************* PLL AND RESET MASKS ************************ */ - -/* PLL_CTL Masks */ -#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */ -#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */ -#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ -#define PLL_OFF 0x0002 /* Shut off PLL clocks */ -#define STOPCK_OFF 0x0008 /* Core clock off */ -#define STOPCK 0x0008 /* Core Clock Off */ -#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */ -#if !defined(__ADSPBF538__) -/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */ -# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ -# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ -#endif -#define BYPASS 0x0100 /* Bypass the PLL */ -/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ -#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ - -/* PLL_DIV Masks */ -#define SSEL 0x000F /* System Select */ -#define CSEL 0x0030 /* Core Select */ - -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ - -#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ -#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ -#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ -#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ -/* PLL_DIV Macros */ -#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ - -/* PLL_STAT Masks */ -#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ -#define FULL_ON 0x0002 /* Processor In Full On Mode */ -#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ -#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ - -/* VR_CTL Masks */ -#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ -#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ -#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ -#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ -#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ - -#define GAIN 0x000C /* Voltage Level Gain */ -#define GAIN_5 0x0000 /* GAIN = 5 */ -#define GAIN_10 0x0004 /* GAIN = 10 */ -#define GAIN_20 0x0008 /* GAIN = 20 */ -#define GAIN_50 0x000C /* GAIN = 50 */ - -#define VLEV 0x00F0 /* Internal Voltage Level */ -#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ -#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ -#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ -#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ -#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ -#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ -#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ -#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ -#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ -#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ - -#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ -#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */ - -/* CHIPID Masks */ -#define CHIPID_VERSION 0xF0000000 -#define CHIPID_FAMILY 0x0FFFF000 -#define CHIPID_MANUFACTURE 0x00000FFE - -/* SWRST Mask */ -#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ -#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ -#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ -#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ -#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ - -/* SYSCR Masks */ -#define BMODE 0x0006 /* Boot Mode - Latched During HW Reset From Mode Pins */ -#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ - -/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */ - - /* SIC_IAR0 Masks */ - -#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ -#define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ -#define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ -#define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ -#define P4_IVG(x) ((x)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ -#define P5_IVG(x) ((x)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ -#define P6_IVG(x) ((x)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ -#define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ - -/* SIC_IAR1 Masks */ - -#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ -#define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ -#define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ -#define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ -#define P12_IVG(x) ((x)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ -#define P13_IVG(x) ((x)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ -#define P14_IVG(x) ((x)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ -#define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ - -/* SIC_IAR2 Masks */ -#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ -#define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ -#define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ -#define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ -#define P20_IVG(x) ((x)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ -#define P21_IVG(x) ((x)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ -#define P22_IVG(x) ((x)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ -#define P23_IVG(x) ((x)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ - -/* SIC_IMASK Masks */ -#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ -#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ -#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ -#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */ - -/* SIC_IWR Masks */ -#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ -#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ -#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ -#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */ - -/* ***************************** UART CONTROLLER MASKS ********************** */ - -/* UART_LCR Register */ - -#define DLAB 0x80 -#define SB 0x40 -#define STP 0x20 -#define EPS 0x10 -#define PEN 0x08 -#define STB 0x04 -#define WLS(x) ((x-5) & 0x03) - -#define DLAB_P 0x07 -#define SB_P 0x06 -#define STP_P 0x05 -#define EPS_P 0x04 -#define PEN_P 0x03 -#define STB_P 0x02 -#define WLS_P1 0x01 -#define WLS_P0 0x00 - -/* UART_MCR Register */ -#define LOOP_ENA 0x10 -#define LOOP_ENA_P 0x04 - -/* UART_LSR Register */ -#define TEMT 0x40 -#define THRE 0x20 -#define BI 0x10 -#define FE 0x08 -#define PE 0x04 -#define OE 0x02 -#define DR 0x01 - -#define TEMP_P 0x06 -#define THRE_P 0x05 -#define BI_P 0x04 -#define FE_P 0x03 -#define PE_P 0x02 -#define OE_P 0x01 -#define DR_P 0x00 - -/* UART_IER Register */ -#define ELSI 0x04 -#define ETBEI 0x02 -#define ERBFI 0x01 - -#define ELSI_P 0x02 -#define ETBEI_P 0x01 -#define ERBFI_P 0x00 - -/* UART_IIR Register */ -#define STATUS(x) ((x << 1) & 0x06) -#define NINT 0x01 -#define STATUS_P1 0x02 -#define STATUS_P0 0x01 -#define NINT_P 0x00 -#define IIR_TX_READY 0x02 /* UART_THR empty */ -#define IIR_RX_READY 0x04 /* Receive data ready */ -#define IIR_LINE_CHANGE 0x06 /* Receive line status */ -#define IIR_STATUS 0x06 - -/* UART_GCTL Register */ -#define FFE 0x20 -#define FPE 0x10 -#define RPOLC 0x08 -#define TPOLC 0x04 -#define IREN 0x02 -#define UCEN 0x01 - -#define FFE_P 0x05 -#define FPE_P 0x04 -#define RPOLC_P 0x03 -#define TPOLC_P 0x02 -#define IREN_P 0x01 -#define UCEN_P 0x00 - -/* ********** SERIAL PORT MASKS ********************** */ - -/* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define DTYPE_NORM 0x0000 /* Data Format Normal */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ - -/* SPORTx_TCR2 Masks */ -#if defined(__ADSPBF531__) || defined(__ADSPBF532__) || \ - defined(__ADSPBF533__) -# define SLEN 0x001F /*TX Word Length */ -#else -# define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ -#endif -#define TXSE 0x0100 /*TX Secondary Enable */ -#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /*TX Right-First Data Order */ - -/* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -#define DTYPE_NORM 0x0000 /* no companding */ -#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ -#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ - -/* SPORTx_RCR2 Masks */ -/* SLEN defined above */ -#define RXSE 0x0100 /*RX Secondary Enable */ -#define RSFSE 0x0200 /*RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /*Right-First Data Order */ - -/*SPORTx_STAT Masks */ -#define RXNE 0x0001 /*RX FIFO Not Empty Status */ -#define RUVF 0x0002 /*RX Underflow Status */ -#define ROVF 0x0004 /*RX Overflow Status */ -#define TXF 0x0008 /*TX FIFO Full Status */ -#define TUVF 0x0010 /*TX Underflow Status */ -#define TOVF 0x0020 /*TX Overflow Status */ -#define TXHRE 0x0040 /*TX Hold Register Empty */ - -/*SPORTx_MCMC1 Masks */ -#define SP_WSIZE 0x0000F000 /*Multichannel Window Size Field */ -#define SP_WOFF 0x000003FF /*Multichannel Window Offset Field */ -/* SPORTx_MCMC1 Macros */ -#define SET_SP_WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ -/* Only use SET_WSIZE Macro With Logic OR While Setting Lower Order Bits */ -#define SET_SP_WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ - -/*SPORTx_MCMC2 Masks */ -#define MCCRM 0x00000003 /*Multichannel Clock Recovery Mode */ -#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ -#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ -#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ -#define MCDTXPE 0x00000004 /*Multichannel DMA Transmit Packing */ -#define MCDRXPE 0x00000008 /*Multichannel DMA Receive Packing */ -#define MCMEN 0x00000010 /*Multichannel Frame Mode Enable */ -#define FSDR 0x00000080 /*Multichannel Frame Sync to Data Relationship */ -#define MFD 0x0000F000 /*Multichannel Frame Delay */ -#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ -#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ -#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ -#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ -#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ -#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ -#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ -#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ -#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ -#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ -#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ -#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ -#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ -#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ -#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ -#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ - -/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */ - -/* PPI_CONTROL Masks */ -#define PORT_EN 0x00000001 /* PPI Port Enable */ -#define PORT_DIR 0x00000002 /* PPI Port Direction */ -#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ -#define PORT_CFG 0x00000030 /* PPI Port Configuration */ -#define FLD_SEL 0x00000040 /* PPI Active Field Select */ -#define PACK_EN 0x00000080 /* PPI Packing Mode */ -#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ -#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ -#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ -#define DLENGTH 0x00003800 /* PPI Data Length */ -#define DLEN_8 0x0000 /* Data Length = 8 Bits */ -#define DLEN_10 0x0800 /* Data Length = 10 Bits */ -#define DLEN_11 0x1000 /* Data Length = 11 Bits */ -#define DLEN_12 0x1800 /* Data Length = 12 Bits */ -#define DLEN_13 0x2000 /* Data Length = 13 Bits */ -#define DLEN_14 0x2800 /* Data Length = 14 Bits */ -#define DLEN_15 0x3000 /* Data Length = 15 Bits */ -#define DLEN_16 0x3800 /* Data Length = 16 Bits */ -#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ -#define POL 0x0000C000 /* PPI Signal Polarities */ -#define POLC 0x4000 /* PPI Clock Polarity */ -#define POLS 0x8000 /* PPI Frame Sync Polarity */ - -/* PPI_STATUS Masks */ -#define FLD 0x00000400 /* Field Indicator */ -#define FT_ERR 0x00000800 /* Frame Track Error */ -#define OVR 0x00001000 /* FIFO Overflow Error */ -#define UNDR 0x00002000 /* FIFO Underrun Error */ -#define ERR_DET 0x00004000 /* Error Detected Indicator */ -#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ - -/* ********** DMA CONTROLLER MASKS *********************8 */ - -/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */ -#define DMAEN 0x00000001 /* Channel Enable */ -#define WNR 0x00000002 /* Channel Direction (W/R*) */ -#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ -#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ -#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ -#define DMA2D 0x00000010 /* 2D/1D* Mode */ -#define RESTART 0x00000020 /* Restart */ -#define DI_SEL 0x00000040 /* Data Interrupt Select */ -#define DI_EN 0x00000080 /* Data Interrupt Enable */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ -#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ -#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ -#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ -#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ -#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ -#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ -#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ -#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ -#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define NDSIZE 0x00000900 /* Next Descriptor Size */ -#define DMAFLOW 0x00007000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ -#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ -#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ -#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ - -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ - -/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ - -#define DMA_DONE 0x00000001 /* DMA Done Indicator */ -#define DMA_ERR 0x00000002 /* DMA Error Indicator */ -#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ -#define DMA_RUN 0x00000008 /* DMA Running Indicator */ - -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ - -/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ - -#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ -#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ -#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ -#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ -#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ -#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ -#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ -#define PMAP 0x00007000 /* DMA Peripheral Map Field */ - -#define PMAP_PPI 0x0000 /* PMAP PPI Port DMA */ -#define PMAP_SPORT0RX 0x1000 /* PMAP SPORT0 Receive DMA */ -#define PMAP_SPORT0TX 0x2000 /* PMAP SPORT0 Transmit DMA */ -#define PMAP_SPORT1RX 0x3000 /* PMAP SPORT1 Receive DMA */ -#define PMAP_SPORT1TX 0x4000 /* PMAP SPORT1 Transmit DMA */ -#define PMAP_SPI 0x5000 /* PMAP SPI DMA */ -#define PMAP_UARTRX 0x6000 /* PMAP UART Receive DMA */ -#define PMAP_UARTTX 0x7000 /* PMAP UART Transmit DMA */ - -/* ************* GENERAL PURPOSE TIMER MASKS ******************** */ - -/* PWM Timer bit definitions */ - -/* TIMER_ENABLE Register */ -#define TIMEN0 0x0001 -#define TIMEN1 0x0002 -#define TIMEN2 0x0004 - -#define TIMEN0_P 0x00 -#define TIMEN1_P 0x01 -#define TIMEN2_P 0x02 - -/* TIMER_DISABLE Register */ -#define TIMDIS0 0x0001 -#define TIMDIS1 0x0002 -#define TIMDIS2 0x0004 - -#define TIMDIS0_P 0x00 -#define TIMDIS1_P 0x01 -#define TIMDIS2_P 0x02 - -/* TIMER_STATUS Register */ -#define TIMIL0 0x0001 -#define TIMIL1 0x0002 -#define TIMIL2 0x0004 -#define TOVF_ERR0 0x0010 /* Timer 0 Counter Overflow */ -#define TOVF_ERR1 0x0020 /* Timer 1 Counter Overflow */ -#define TOVF_ERR2 0x0040 /* Timer 2 Counter Overflow */ -#define TRUN0 0x1000 -#define TRUN1 0x2000 -#define TRUN2 0x4000 - -#define TIMIL0_P 0x00 -#define TIMIL1_P 0x01 -#define TIMIL2_P 0x02 -#define TOVF_ERR0_P 0x04 -#define TOVF_ERR1_P 0x05 -#define TOVF_ERR2_P 0x06 -#define TRUN0_P 0x0C -#define TRUN1_P 0x0D -#define TRUN2_P 0x0E - -/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ -#define TOVL_ERR0 TOVF_ERR0 -#define TOVL_ERR1 TOVF_ERR1 -#define TOVL_ERR2 TOVF_ERR2 -#define TOVL_ERR0_P TOVF_ERR0_P -#define TOVL_ERR1_P TOVF_ERR1_P -#define TOVL_ERR2_P TOVF_ERR2_P - -/* TIMERx_CONFIG Registers */ -#define PWM_OUT 0x0001 -#define WDTH_CAP 0x0002 -#define EXT_CLK 0x0003 -#define PULSE_HI 0x0004 -#define PERIOD_CNT 0x0008 -#define IRQ_ENA 0x0010 -#define TIN_SEL 0x0020 -#define OUT_DIS 0x0040 -#define CLK_SEL 0x0080 -#define TOGGLE_HI 0x0100 -#define EMU_RUN 0x0200 -#define ERR_TYP(x) ((x & 0x03) << 14) - -#define TMODE_P0 0x00 -#define TMODE_P1 0x01 -#define PULSE_HI_P 0x02 -#define PERIOD_CNT_P 0x03 -#define IRQ_ENA_P 0x04 -#define TIN_SEL_P 0x05 -#define OUT_DIS_P 0x06 -#define CLK_SEL_P 0x07 -#define TOGGLE_HI_P 0x08 -#define EMU_RUN_P 0x09 -#define ERR_TYP_P0 0x0E -#define ERR_TYP_P1 0x0F - -/*/ ****************** PROGRAMMABLE FLAG MASKS ********************* */ - -/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ -#define PF0 0x0001 -#define PF1 0x0002 -#define PF2 0x0004 -#define PF3 0x0008 -#define PF4 0x0010 -#define PF5 0x0020 -#define PF6 0x0040 -#define PF7 0x0080 -#define PF8 0x0100 -#define PF9 0x0200 -#define PF10 0x0400 -#define PF11 0x0800 -#define PF12 0x1000 -#define PF13 0x2000 -#define PF14 0x4000 -#define PF15 0x8000 - -/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ -#define PF0_P 0 -#define PF1_P 1 -#define PF2_P 2 -#define PF3_P 3 -#define PF4_P 4 -#define PF5_P 5 -#define PF6_P 6 -#define PF7_P 7 -#define PF8_P 8 -#define PF9_P 9 -#define PF10_P 10 -#define PF11_P 11 -#define PF12_P 12 -#define PF13_P 13 -#define PF14_P 14 -#define PF15_P 15 - -/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ - -/* SPI_CTL Masks */ -#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ -#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ -#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ -#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ -#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ -#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ -#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ -#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ -#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ -#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ -#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ -#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ -#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ -#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ -#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ -#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ - -/* SPI_FLG Masks */ -#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_FLG Bit Positions */ -#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_STAT Masks */ -#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ -#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ -#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ -#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ -#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ -#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ -#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ - -/* SPIx_FLG Masks */ -#define FLG1E 0xFDFF /* Activates SPI_FLOUT1 */ -#define FLG2E 0xFBFF /* Activates SPI_FLOUT2 */ -#define FLG3E 0xF7FF /* Activates SPI_FLOUT3 */ -#define FLG4E 0xEFFF /* Activates SPI_FLOUT4 */ -#define FLG5E 0xDFFF /* Activates SPI_FLOUT5 */ -#define FLG6E 0xBFFF /* Activates SPI_FLOUT6 */ -#define FLG7E 0x7FFF /* Activates SPI_FLOUT7 */ - -/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ - -/* AMGCTL Masks */ -#define AMCKEN 0x00000001 /* Enable CLKOUT */ -#define AMBEN_NONE 0x00000000 /* All Banks Disabled */ -#define AMBEN_B0 0x00000002 /* Enable Asynchronous Memory Bank 0 only */ -#define AMBEN_B0_B1 0x00000004 /* Enable Asynchronous Memory Banks 0 & 1 only */ -#define AMBEN_B0_B1_B2 0x00000006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */ -#define AMBEN_ALL 0x00000008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ - -/* AMGCTL Bit Positions */ -#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ -#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ -#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ -#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ - -/* AMBCTL0 Masks */ -#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ -#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ -#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ -#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ -#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ -#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ -#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ -#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ -#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ -#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ -#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ -#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ -#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ -#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ -#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ -#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ -#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ -#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ -#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ -#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ -#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ -#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ -#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ -#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ -#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ -#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ -#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ -#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ -#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ -#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ -#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ -#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ -#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ -#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ -#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ -#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ -#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ -#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ -#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ -#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ -#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ -#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ -#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ -#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ -#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ -#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ -#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ -#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ -#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ -#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ -#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ -#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ -#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ -#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ -#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ -#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ -#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ -#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ -#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ -#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ -#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ -#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ -#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ -#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ -#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ -#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ -#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ -#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ -#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ -#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ -#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ -#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ -#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ -#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ -#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ -#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ -#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ -#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ -#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ -#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ -#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ -#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ -#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ -#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ -#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ -#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ -#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ -#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ - -/* AMBCTL1 Masks */ -#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ -#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ -#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ -#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ -#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ -#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ -#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ -#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ -#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ -#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ -#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ -#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ -#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ -#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ -#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ -#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ -#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ -#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ -#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ -#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ -#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ -#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ -#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ -#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ -#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ -#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ -#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ -#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ -#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ -#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ -#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ -#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ -#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ -#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ -#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ -#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ -#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ -#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ -#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ -#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ -#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ -#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ -#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ -#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ -#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ -#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ -#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ -#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ -#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ -#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ -#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ -#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ -#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ -#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ -#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ -#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ -#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ -#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ -#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ -#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ -#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ -#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ -#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ -#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ -#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ -#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ -#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ -#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ -#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ -#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ -#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ -#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ -#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ -#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ -#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ -#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ -#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ -#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ -#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ -#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ -#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ -#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ -#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ -#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ -#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ -#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ -#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ -#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ - -/* ********************** SDRAM CONTROLLER MASKS *************************** */ - -/* SDGCTL Masks */ -#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ -#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ -#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ -#define PFE 0x00000010 /* Enable SDRAM prefetch */ -#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ -#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ -#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ -#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ -#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ -#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ -#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ -#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ -#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ -#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ -#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ -#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ -#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ -#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ -#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ -#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ -#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ -#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ -#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ -#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ -#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ -#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ -#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ -#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ -#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ -#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ -#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ -#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ -#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ -#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ -#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ -#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ -#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ -#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ -#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ -#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ -#define PUPSD 0x00200000 /*Power-up start delay */ -#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ -#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ -#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ -#define EBUFE 0x02000000 /* Enable external buffering timing */ -#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ -#define EMREN 0x10000000 /* Extended mode register enable */ -#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ -#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ - -/* EBIU_SDBCTL Masks */ -#define EBE 0x00000001 /* Enable SDRAM external bank */ -#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ -#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ -#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ -#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ -#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ -#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ -#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ -#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ - -/* EBIU_SDSTAT Masks */ -#define SDCI 0x00000001 /* SDRAM controller is idle */ -#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ -#define SDPUA 0x00000004 /* SDRAM power up active */ -#define SDRS 0x00000008 /* SDRAM is in reset state */ -#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ -#define BGSTAT 0x00000020 /* Bus granted */ - - -#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h deleted file mode 100644 index bd9d5e94307d..000000000000 --- a/include/asm-blackfin/mach-bf533/dma.h +++ /dev/null @@ -1,54 +0,0 @@ -/***************************************************************************** -* -* BF-533/2/1 Specific Declarations -* -****************************************************************************/ -/* - * File: include/asm-blackfin/mach-bf533/dma.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _MACH_DMA_H_ -#define _MACH_DMA_H_ - -#define MAX_BLACKFIN_DMA_CHANNEL 12 - -#define CH_PPI 0 -#define CH_SPORT0_RX 1 -#define CH_SPORT0_TX 2 -#define CH_SPORT1_RX 3 -#define CH_SPORT1_TX 4 -#define CH_SPI 5 -#define CH_UART_RX 6 -#define CH_UART_TX 7 -#define CH_MEM_STREAM0_DEST 8 /* TX */ -#define CH_MEM_STREAM0_SRC 9 /* RX */ -#define CH_MEM_STREAM1_DEST 10 /* TX */ -#define CH_MEM_STREAM1_SRC 11 /* RX */ - -#endif diff --git a/include/asm-blackfin/mach-bf533/irq.h b/include/asm-blackfin/mach-bf533/irq.h deleted file mode 100644 index 5aa38e5da6b7..000000000000 --- a/include/asm-blackfin/mach-bf533/irq.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/defBF532.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _BF533_IRQ_H_ -#define _BF533_IRQ_H_ - -/* - * Interrupt source definitions - Event Source Core Event Name -Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - PLL Wakeup Interrupt IVG7 7 - DMA Error (generic) IVG7 8 - PPI Error Interrupt IVG7 9 - SPORT0 Error Interrupt IVG7 10 - SPORT1 Error Interrupt IVG7 11 - SPI Error Interrupt IVG7 12 - UART Error Interrupt IVG7 13 - RTC Interrupt IVG8 14 - DMA0 Interrupt (PPI) IVG8 15 - DMA1 (SPORT0 RX) IVG9 16 - DMA2 (SPORT0 TX) IVG9 17 - DMA3 (SPORT1 RX) IVG9 18 - DMA4 (SPORT1 TX) IVG9 19 - DMA5 (PPI) IVG10 20 - DMA6 (UART RX) IVG10 21 - DMA7 (UART TX) IVG10 22 - Timer0 IVG11 23 - Timer1 IVG11 24 - Timer2 IVG11 25 - PF Interrupt A IVG12 26 - PF Interrupt B IVG12 27 - DMA8/9 Interrupt IVG13 28 - DMA10/11 Interrupt IVG13 29 - Watchdog Timer IVG13 30 - - Softirq IVG14 31 - System Call -- - (lowest priority) IVG15 32 * - */ -#define SYS_IRQS 31 -#define NR_PERI_INTS 24 - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /*Emulation */ -#define IRQ_RST 1 /*reset */ -#define IRQ_NMI 2 /*Non Maskable */ -#define IRQ_EVX 3 /*Exception */ -#define IRQ_UNUSED 4 /*- unused interrupt*/ -#define IRQ_HWERR 5 /*Hardware Error */ -#define IRQ_CORETMR 6 /*Core timer */ - -#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ -#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ -#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */ -#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ -#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ -#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ -#define IRQ_UART_ERROR 13 /*UART Error Interrupt */ -#define IRQ_RTC 14 /*RTC Interrupt */ -#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ -#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ -#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ -#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ -#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ -#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ -#define IRQ_UART_RX 21 /*DMA6 Interrupt (UART RX) */ -#define IRQ_UART_TX 22 /*DMA7 Interrupt (UART TX) */ -#define IRQ_TMR0 23 /*Timer 0 */ -#define IRQ_TMR1 24 /*Timer 1 */ -#define IRQ_TMR2 25 /*Timer 2 */ -#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ -#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ -#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ -#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ -#define IRQ_WATCH 30 /*Watch Dog Timer */ - -#define IRQ_PF0 33 -#define IRQ_PF1 34 -#define IRQ_PF2 35 -#define IRQ_PF3 36 -#define IRQ_PF4 37 -#define IRQ_PF5 38 -#define IRQ_PF6 39 -#define IRQ_PF7 40 -#define IRQ_PF8 41 -#define IRQ_PF9 42 -#define IRQ_PF10 43 -#define IRQ_PF11 44 -#define IRQ_PF12 45 -#define IRQ_PF13 46 -#define IRQ_PF14 47 -#define IRQ_PF15 48 - -#define GPIO_IRQ_BASE IRQ_PF0 - -#define NR_IRQS (IRQ_PF15+1) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 - -/* IAR0 BIT FIELDS*/ -#define RTC_ERROR_POS 28 -#define UART_ERROR_POS 24 -#define SPORT1_ERROR_POS 20 -#define SPI_ERROR_POS 16 -#define SPORT0_ERROR_POS 12 -#define PPI_ERROR_POS 8 -#define DMA_ERROR_POS 4 -#define PLLWAKE_ERROR_POS 0 - -/* IAR1 BIT FIELDS*/ -#define DMA7_UARTTX_POS 28 -#define DMA6_UARTRX_POS 24 -#define DMA5_SPI_POS 20 -#define DMA4_SPORT1TX_POS 16 -#define DMA3_SPORT1RX_POS 12 -#define DMA2_SPORT0TX_POS 8 -#define DMA1_SPORT0RX_POS 4 -#define DMA0_PPI_POS 0 - -/* IAR2 BIT FIELDS*/ -#define WDTIMER_POS 28 -#define MEMDMA1_POS 24 -#define MEMDMA0_POS 20 -#define PFB_POS 16 -#define PFA_POS 12 -#define TIMER2_POS 8 -#define TIMER1_POS 4 -#define TIMER0_POS 0 - -#endif /* _BF533_IRQ_H_ */ diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h deleted file mode 100644 index f8f31901fca9..000000000000 --- a/include/asm-blackfin/mach-bf533/mem_init.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/mem_init.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#if (CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E || \ - CONFIG_MEM_MT48LC32M16A2TG_75 || CONFIG_MEM_GENERIC_BOARD) -#if (CONFIG_SCLK_HZ > 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_7 -#define SDRAM_tRAS_num 7 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 104477612) && (CONFIG_SCLK_HZ <= 119402985) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_6 -#define SDRAM_tRAS_num 6 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_5 -#define SDRAM_tRAS_num 5 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 74626866) && (CONFIG_SCLK_HZ <= 89552239) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 4 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 66666667) && (CONFIG_SCLK_HZ <= 74626866) -#define SDRAM_tRP TRP_2 -#define SDRAM_tRP_num 2 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_2 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 59701493) && (CONFIG_SCLK_HZ <= 66666667) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_4 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 44776119) && (CONFIG_SCLK_HZ <= 59701493) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_3 -#define SDRAM_tRAS_num 3 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ > 29850746) && (CONFIG_SCLK_HZ <= 44776119) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_2 -#define SDRAM_tRAS_num 2 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#if (CONFIG_SCLK_HZ <= 29850746) -#define SDRAM_tRP TRP_1 -#define SDRAM_tRP_num 1 -#define SDRAM_tRAS TRAS_1 -#define SDRAM_tRAS_num 1 -#define SDRAM_tRCD TRCD_1 -#define SDRAM_tWR TWR_2 -#endif -#endif - -#if (CONFIG_MEM_MT48LC16M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC64M4A2FB_7E) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_MT48LC32M16A2TG_75) - /*SDRAM INFORMATION: */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_GENERIC_BOARD) - /*SDRAM INFORMATION: Modify this for your board */ -#define SDRAM_Tref 64 /* Refresh period in milliseconds */ -#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ -#define SDRAM_CL CL_3 -#endif - -#if (CONFIG_MEM_SIZE == 128) -#define SDRAM_SIZE EBSZ_128 -#endif -#if (CONFIG_MEM_SIZE == 64) -#define SDRAM_SIZE EBSZ_64 -#endif -#if (CONFIG_MEM_SIZE == 32) -#define SDRAM_SIZE EBSZ_32 -#endif -#if (CONFIG_MEM_SIZE == 16) -#define SDRAM_SIZE EBSZ_16 -#endif -#if (CONFIG_MEM_ADD_WIDTH == 11) -#define SDRAM_WIDTH EBCAW_11 -#endif -#if (CONFIG_MEM_ADD_WIDTH == 10) -#define SDRAM_WIDTH EBCAW_10 -#endif -#if (CONFIG_MEM_ADD_WIDTH == 9) -#define SDRAM_WIDTH EBCAW_9 -#endif -#if (CONFIG_MEM_ADD_WIDTH == 8) -#define SDRAM_WIDTH EBCAW_8 -#endif - -#define mem_SDBCTL (SDRAM_WIDTH | SDRAM_SIZE | EBE) - -/* Equation from section 17 (p17-46) of BF533 HRM */ -#define mem_SDRRC (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - (SDRAM_tRAS_num + SDRAM_tRP_num) - -/* Enable SCLK Out */ -#define mem_SDGCTL (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR | PSS) - -#if defined CONFIG_CLKIN_HALF -#define CLKIN_HALF 1 -#else -#define CLKIN_HALF 0 -#endif - -#if defined CONFIG_PLL_BYPASS -#define PLL_BYPASS 1 -#else -#define PLL_BYPASS 0 -#endif - -/***************************************Currently Not Being Used *********************************/ -#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ)) -#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 -#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1 - -#if (flash_EBIU_AMBCTL_TT > 3) -#define flash_EBIU_AMBCTL0_TT B0TT_4 -#endif -#if (flash_EBIU_AMBCTL_TT == 3) -#define flash_EBIU_AMBCTL0_TT B0TT_3 -#endif -#if (flash_EBIU_AMBCTL_TT == 2) -#define flash_EBIU_AMBCTL0_TT B0TT_2 -#endif -#if (flash_EBIU_AMBCTL_TT < 2) -#define flash_EBIU_AMBCTL0_TT B0TT_1 -#endif - -#if (flash_EBIU_AMBCTL_ST > 3) -#define flash_EBIU_AMBCTL0_ST B0ST_4 -#endif -#if (flash_EBIU_AMBCTL_ST == 3) -#define flash_EBIU_AMBCTL0_ST B0ST_3 -#endif -#if (flash_EBIU_AMBCTL_ST == 2) -#define flash_EBIU_AMBCTL0_ST B0ST_2 -#endif -#if (flash_EBIU_AMBCTL_ST < 2) -#define flash_EBIU_AMBCTL0_ST B0ST_1 -#endif - -#if (flash_EBIU_AMBCTL_HT > 2) -#define flash_EBIU_AMBCTL0_HT B0HT_3 -#endif -#if (flash_EBIU_AMBCTL_HT == 2) -#define flash_EBIU_AMBCTL0_HT B0HT_2 -#endif -#if (flash_EBIU_AMBCTL_HT == 1) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0) -#define flash_EBIU_AMBCTL0_HT B0HT_0 -#endif -#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0) -#define flash_EBIU_AMBCTL0_HT B0HT_1 -#endif - -#if (flash_EBIU_AMBCTL_WAT > 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_15 -#endif -#if (flash_EBIU_AMBCTL_WAT == 14) -#define flash_EBIU_AMBCTL0_WAT B0WAT_14 -#endif -#if (flash_EBIU_AMBCTL_WAT == 13) -#define flash_EBIU_AMBCTL0_WAT B0WAT_13 -#endif -#if (flash_EBIU_AMBCTL_WAT == 12) -#define flash_EBIU_AMBCTL0_WAT B0WAT_12 -#endif -#if (flash_EBIU_AMBCTL_WAT == 11) -#define flash_EBIU_AMBCTL0_WAT B0WAT_11 -#endif -#if (flash_EBIU_AMBCTL_WAT == 10) -#define flash_EBIU_AMBCTL0_WAT B0WAT_10 -#endif -#if (flash_EBIU_AMBCTL_WAT == 9) -#define flash_EBIU_AMBCTL0_WAT B0WAT_9 -#endif -#if (flash_EBIU_AMBCTL_WAT == 8) -#define flash_EBIU_AMBCTL0_WAT B0WAT_8 -#endif -#if (flash_EBIU_AMBCTL_WAT == 7) -#define flash_EBIU_AMBCTL0_WAT B0WAT_7 -#endif -#if (flash_EBIU_AMBCTL_WAT == 6) -#define flash_EBIU_AMBCTL0_WAT B0WAT_6 -#endif -#if (flash_EBIU_AMBCTL_WAT == 5) -#define flash_EBIU_AMBCTL0_WAT B0WAT_5 -#endif -#if (flash_EBIU_AMBCTL_WAT == 4) -#define flash_EBIU_AMBCTL0_WAT B0WAT_4 -#endif -#if (flash_EBIU_AMBCTL_WAT == 3) -#define flash_EBIU_AMBCTL0_WAT B0WAT_3 -#endif -#if (flash_EBIU_AMBCTL_WAT == 2) -#define flash_EBIU_AMBCTL0_WAT B0WAT_2 -#endif -#if (flash_EBIU_AMBCTL_WAT == 1) -#define flash_EBIU_AMBCTL0_WAT B0WAT_1 -#endif - -#if (flash_EBIU_AMBCTL_RAT > 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_15 -#endif -#if (flash_EBIU_AMBCTL_RAT == 14) -#define flash_EBIU_AMBCTL0_RAT B0RAT_14 -#endif -#if (flash_EBIU_AMBCTL_RAT == 13) -#define flash_EBIU_AMBCTL0_RAT B0RAT_13 -#endif -#if (flash_EBIU_AMBCTL_RAT == 12) -#define flash_EBIU_AMBCTL0_RAT B0RAT_12 -#endif -#if (flash_EBIU_AMBCTL_RAT == 11) -#define flash_EBIU_AMBCTL0_RAT B0RAT_11 -#endif -#if (flash_EBIU_AMBCTL_RAT == 10) -#define flash_EBIU_AMBCTL0_RAT B0RAT_10 -#endif -#if (flash_EBIU_AMBCTL_RAT == 9) -#define flash_EBIU_AMBCTL0_RAT B0RAT_9 -#endif -#if (flash_EBIU_AMBCTL_RAT == 8) -#define flash_EBIU_AMBCTL0_RAT B0RAT_8 -#endif -#if (flash_EBIU_AMBCTL_RAT == 7) -#define flash_EBIU_AMBCTL0_RAT B0RAT_7 -#endif -#if (flash_EBIU_AMBCTL_RAT == 6) -#define flash_EBIU_AMBCTL0_RAT B0RAT_6 -#endif -#if (flash_EBIU_AMBCTL_RAT == 5) -#define flash_EBIU_AMBCTL0_RAT B0RAT_5 -#endif -#if (flash_EBIU_AMBCTL_RAT == 4) -#define flash_EBIU_AMBCTL0_RAT B0RAT_4 -#endif -#if (flash_EBIU_AMBCTL_RAT == 3) -#define flash_EBIU_AMBCTL0_RAT B0RAT_3 -#endif -#if (flash_EBIU_AMBCTL_RAT == 2) -#define flash_EBIU_AMBCTL0_RAT B0RAT_2 -#endif -#if (flash_EBIU_AMBCTL_RAT == 1) -#define flash_EBIU_AMBCTL0_RAT B0RAT_1 -#endif - -#define flash_EBIU_AMBCTL0 \ - (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \ - flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN) diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h deleted file mode 100644 index bd30b6f3be00..000000000000 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ /dev/null @@ -1,166 +0,0 @@ -/* - * File: include/asm-blackfin/mach-bf533/mem_map.h - * Based on: - * Author: - * - * Created: - * Description: - * - * Rev: - * - * Modified: - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. - * If not, write to the Free Software Foundation, - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef _MEM_MAP_533_H_ -#define _MEM_MAP_533_H_ - -#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ -#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ - -/* Async Memory Banks */ -#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */ -#define ASYNC_BANK3_SIZE 0x00100000 /* 1M */ -#define ASYNC_BANK2_BASE 0x20200000 /* Async Bank 2 */ -#define ASYNC_BANK2_SIZE 0x00100000 /* 1M */ -#define ASYNC_BANK1_BASE 0x20100000 /* Async Bank 1 */ -#define ASYNC_BANK1_SIZE 0x00100000 /* 1M */ -#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */ -#define ASYNC_BANK0_SIZE 0x00100000 /* 1M */ - -/* Boot ROM Memory */ - -#define BOOT_ROM_START 0xEF000000 -#define BOOT_ROM_LENGTH 0x400 - -/* Level 1 Memory */ - -#ifdef CONFIG_BFIN_ICACHE -#define BFIN_ICACHESIZE (16*1024) -#else -#define BFIN_ICACHESIZE (0*1024) -#endif - -/* Memory Map for ADSP-BF533 processors */ - -#ifdef CONFIG_BF533 -#define L1_CODE_START 0xFFA00000 -#define L1_DATA_A_START 0xFF800000 -#define L1_DATA_B_START 0xFF900000 - -#ifdef CONFIG_BFIN_ICACHE -#define L1_CODE_LENGTH (0x14000 - 0x4000) -#else -#define L1_CODE_LENGTH 0x14000 -#endif - -#ifdef CONFIG_BFIN_DCACHE - -#ifdef CONFIG_BFIN_DCACHE_BANKA -#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH (0x8000 - 0x4000) -#define L1_DATA_B_LENGTH 0x8000 -#define BFIN_DCACHESIZE (16*1024) -#define BFIN_DSUPBANKS 1 -#else -#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH (0x8000 - 0x4000) -#define L1_DATA_B_LENGTH (0x8000 - 0x4000) -#define BFIN_DCACHESIZE (32*1024) -#define BFIN_DSUPBANKS 2 -#endif - -#else -#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH 0x8000 -#define L1_DATA_B_LENGTH 0x8000 -#define BFIN_DCACHESIZE (0*1024) -#define BFIN_DSUPBANKS 0 -#endif /*CONFIG_BFIN_DCACHE*/ -#endif - -/* Memory Map for ADSP-BF532 processors */ - -#ifdef CONFIG_BF532 -#define L1_CODE_START 0xFFA08000 -#define L1_DATA_A_START 0xFF804000 -#define L1_DATA_B_START 0xFF904000 - -#ifdef CONFIG_BFIN_ICACHE -#define L1_CODE_LENGTH (0xC000 - 0x4000) -#else -#define L1_CODE_LENGTH 0xC000 -#endif - -#ifdef CONFIG_BFIN_DCACHE - -#ifdef CONFIG_BFIN_DCACHE_BANKA -#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH (0x4000 - 0x4000) -#define L1_DATA_B_LENGTH 0x4000 -#define BFIN_DCACHESIZE (16*1024) -#define BFIN_DSUPBANKS 1 - -#else -#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH (0x4000 - 0x4000) -#define L1_DATA_B_LENGTH (0x4000 - 0x4000) -#define BFIN_DCACHESIZE (32*1024) -#define BFIN_DSUPBANKS 2 -#endif - -#else -#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH 0x4000 -#define L1_DATA_B_LENGTH 0x4000 -#define BFIN_DCACHESIZE (0*1024) -#define BFIN_DSUPBANKS 0 -#endif /*CONFIG_BFIN_DCACHE*/ -#endif - -/* Memory Map for ADSP-BF531 processors */ - -#ifdef CONFIG_BF531 -#define L1_CODE_START 0xFFA08000 -#define L1_DATA_A_START 0xFF804000 -#define L1_DATA_B_START 0xFF904000 -#define L1_CODE_LENGTH 0x4000 -#define L1_DATA_B_LENGTH 0x0000 - - -#ifdef CONFIG_BFIN_DCACHE -#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH (0x4000 - 0x4000) -#define BFIN_DCACHESIZE (16*1024) -#define BFIN_DSUPBANKS 1 -#else -#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0) -#define L1_DATA_A_LENGTH 0x4000 -#define BFIN_DCACHESIZE (0*1024) -#define BFIN_DSUPBANKS 0 -#endif - -#endif - -/* Scratch Pad Memory */ - -#define L1_SCRATCH_START 0xFFB00000 -#define L1_SCRATCH_LENGTH 0x1000 - -#endif /* _MEM_MAP_533_H_ */ diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h deleted file mode 100644 index 685a2651dcda..000000000000 --- a/include/asm-blackfin/mach-bf533/portmux.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _MACH_PORTMUX_H_ -#define _MACH_PORTMUX_H_ - -#define MAX_RESOURCES MAX_BLACKFIN_GPIOS - -#define P_PPI0_CLK (P_DONTCARE) -#define P_PPI0_FS1 (P_DONTCARE) -#define P_PPI0_FS2 (P_DONTCARE) -#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3)) -#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4)) -#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5)) -#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6)) -#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7)) -#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8)) -#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9)) -#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10)) -#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11)) -#define P_PPI0_D0 (P_DONTCARE) -#define P_PPI0_D1 (P_DONTCARE) -#define P_PPI0_D2 (P_DONTCARE) -#define P_PPI0_D3 (P_DONTCARE) -#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15)) -#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14)) -#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13)) -#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12)) - -#define P_SPORT1_TSCLK (P_DONTCARE) -#define P_SPORT1_RSCLK (P_DONTCARE) -#define P_SPORT0_TSCLK (P_DONTCARE) -#define P_SPORT0_RSCLK (P_DONTCARE) -#define P_UART0_RX (P_DONTCARE) -#define P_UART0_TX (P_DONTCARE) -#define P_SPORT1_DRSEC (P_DONTCARE) -#define P_SPORT1_RFS (P_DONTCARE) -#define P_SPORT1_DTPRI (P_DONTCARE) -#define P_SPORT1_DTSEC (P_DONTCARE) -#define P_SPORT1_TFS (P_DONTCARE) -#define P_SPORT1_DRPRI (P_DONTCARE) -#define P_SPORT0_DRSEC (P_DONTCARE) -#define P_SPORT0_RFS (P_DONTCARE) -#define P_SPORT0_DTPRI (P_DONTCARE) -#define P_SPORT0_DTSEC (P_DONTCARE) -#define P_SPORT0_TFS (P_DONTCARE) -#define P_SPORT0_DRPRI (P_DONTCARE) - -#define P_SPI0_MOSI (P_DONTCARE) -#define P_SPI0_MISO (P_DONTCARE) -#define P_SPI0_SCK (P_DONTCARE) -#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7)) -#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6)) -#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5)) -#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4)) -#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3)) -#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2)) -#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1)) -#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0)) - -#define P_TMR2 (P_DONTCARE) -#define P_TMR1 (P_DONTCARE) -#define P_TMR0 (P_DONTCARE) -#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1)) - - - - - -#endif /* _MACH_PORTMUX_H_ */ |
