diff options
Diffstat (limited to 'include/asm-arm')
35 files changed, 898 insertions, 121 deletions
diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h new file mode 100644 index 000000000000..0e9b7e18af05 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/aaec2000.h @@ -0,0 +1,151 @@ +/* + * linux/include/asm-arm/arch-aaec2000/aaec2000.h + * + * AAEC-2000 registers definition + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_AAEC2000_H +#define __ASM_ARCH_AAEC2000_H + +#ifndef __ASM_ARCH_HARDWARE_H +#error You must include hardware.h not this file +#endif /* __ASM_ARCH_HARDWARE_H */ + +/* Interrupt controller */ +#define IRQ_BASE __REG(0x80000500) +#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */ +#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */ +#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */ +#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */ + +/* UART 1 */ +#define UART1_BASE __REG(0x80000600) +#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */ +#define UART1_LCR __REG(0x80000604) /* Link Control Register */ +#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */ +#define UART1_CR __REG(0x8000060c) /* Control Register */ +#define UART1_SR __REG(0x80000610) /* Status Register */ +#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */ +#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */ +#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */ + +/* UART 2 */ +#define UART2_BASE __REG(0x80000700) +#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */ +#define UART2_LCR __REG(0x80000704) /* Link Control Register */ +#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */ +#define UART2_CR __REG(0x8000070c) /* Control Register */ +#define UART2_SR __REG(0x80000710) /* Status Register */ +#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */ +#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */ +#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */ + +/* UART 3 */ +#define UART3_BASE __REG(0x80000800) +#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */ +#define UART3_LCR __REG(0x80000804) /* Link Control Register */ +#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */ +#define UART3_CR __REG(0x8000080c) /* Control Register */ +#define UART3_SR __REG(0x80000810) /* Status Register */ +#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */ +#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */ +#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */ + +/* These are used in some places */ +#define _UART1_BASE __PREG(UART1_BASE) +#define _UART2_BASE __PREG(UART2_BASE) +#define _UART3_BASE __PREG(UART3_BASE) + +/* UART Registers Offsets */ +#define UART_DR 0x00 +#define UART_LCR 0x04 +#define UART_BRCR 0x08 +#define UART_CR 0x0c +#define UART_SR 0x10 +#define UART_INT 0x14 +#define UART_INTM 0x18 +#define UART_INTRES 0x1c + +/* UART_LCR Bitmask */ +#define UART_LCR_BRK (1 << 0) /* Send Break */ +#define UART_LCR_PEN (1 << 1) /* Parity Enable */ +#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */ +#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */ +#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */ +#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */ +#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */ +#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */ +#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */ + +/* UART_CR Bitmask */ +#define UART_CR_EN (1 << 0) /* UART Enable */ +#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */ +#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */ +#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */ +#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */ +#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */ +#define UART_CR_LOOP (1 << 6) /* Loopback Mode */ + +/* UART_SR Bitmask */ +#define UART_SR_CTS (1 << 0) /* Clear To Send Status */ +#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */ +#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */ +#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */ +#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */ +#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */ +#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */ +#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */ + +/* UART_INT Bitmask */ +#define UART_INT_RIS (1 << 0) /* Rx Interrupt */ +#define UART_INT_TIS (1 << 1) /* Tx Interrupt */ +#define UART_INT_MIS (1 << 2) /* Modem Interrupt */ +#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */ + +/* Timer 1 */ +#define TIMER1_BASE __REG(0x80000c00) +#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */ +#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */ +#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */ +#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */ + +/* Timer 2 */ +#define TIMER2_BASE __REG(0x80000d00) +#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */ +#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */ +#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */ +#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */ + +/* Timer 3 */ +#define TIMER3_BASE __REG(0x80000e00) +#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */ +#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */ +#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */ +#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */ + +/* Timer Control register bits */ +#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start° Timer */ +#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */ +#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */ +#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */ +#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/ + +/* Power and State Control */ +#define POWER_BASE __REG(0x80000400) +#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */ +#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */ +#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */ +#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */ +#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */ +#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */ +#define POWER_TEOI __REG(0x80000418) /* Tick EoI */ +#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */ +#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */ + +#endif /* __ARM_ARCH_AAEC2000_H */ diff --git a/include/asm-arm/arch-aaec2000/debug-macro.S b/include/asm-arm/arch-aaec2000/debug-macro.S new file mode 100644 index 000000000000..e4f1fa539a74 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/debug-macro.S @@ -0,0 +1,36 @@ +/* linux/include/asm-arm/arch-aaec2000/debug-macro.S + * + * Debugging macro include header + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x80000000 @ physical + movne \rx, #io_p2v(0x80000000) @ virtual + orr \rx, \rx, #0x00000800 + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #0] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 7) + beq 1002b + .endm + + .macro waituart,rd,rx +#if 0 +1001: ldr \rd, [\rx, #0x10] + tst \rd, #(1 << 5) + beq 1001b +#endif + .endm diff --git a/include/asm-arm/arch-aaec2000/dma.h b/include/asm-arm/arch-aaec2000/dma.h new file mode 100644 index 000000000000..28c890b4a1d3 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/dma.h @@ -0,0 +1,17 @@ +/* + * linux/include/asm-arm/arch-aaec2000/dma.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 0 + +#endif diff --git a/include/asm-arm/arch-aaec2000/entry-macro.S b/include/asm-arm/arch-aaec2000/entry-macro.S new file mode 100644 index 000000000000..df31313ab07e --- /dev/null +++ b/include/asm-arm/arch-aaec2000/entry-macro.S @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/arch-aaec2000/entry-macro.S + * + * Low-level IRQ helper for aaec-2000 based platforms + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + .macro disable_fiq + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + mov r4, #0xf8000000 + add r4, r4, #0x00000500 + mov \base, r4 + ldr \irqstat, [\base, #0] + cmp \irqstat, #0 + bne 1001f + ldr \irqnr, =NR_IRQS+1 + b 1003f +1001: mov \irqnr, #0 +1002: ands \tmp, \irqstat, #1 + mov \irqstat, \irqstat, LSR #1 + add \irqnr, \irqnr, #1 + beq 1002b + sub \irqnr, \irqnr, #1 +1003: + .endm diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h new file mode 100644 index 000000000000..4c37219e030e --- /dev/null +++ b/include/asm-arm/arch-aaec2000/hardware.h @@ -0,0 +1,49 @@ +/* + * linux/include/asm-arm/arch-aaec2000/hardware.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include <linux/config.h> + +/* The kernel is loaded at physical address 0xf8000000. + * We map the IO space a bit after + */ +#define PIO_APB_BASE 0x80000000 +#define VIO_APB_BASE 0xf8000000 +#define IO_APB_LENGTH 0x2000 +#define PIO_AHB_BASE 0x80002000 +#define VIO_AHB_BASE 0xf8002000 +#define IO_AHB_LENGTH 0x2000 + +#define VIO_BASE VIO_APB_BASE +#define PIO_BASE PIO_APB_BASE + +#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE ) +#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE ) + +#ifndef __ASSEMBLY__ + +#include <asm/types.h> + +/* FIXME: Is it needed to optimize this a la pxa ?? */ +#define __REG(x) (*((volatile u32 *)io_p2v(x))) +#define __PREG(x) (io_v2p((u32)&(x))) + +#else /* __ASSEMBLY__ */ + +#define __REG(x) io_p2v(x) +#define __PREG(x) io_v2p(x) + +#endif + +#include "aaec2000.h" + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h new file mode 100644 index 000000000000..c58a8d10425a --- /dev/null +++ b/include/asm-arm/arch-aaec2000/io.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-aaec2000/io.h + * + * Copied from asm/arch/sa1100/io.h + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * We don't actually have real ISA nor PCI buses, but there is so many + * drivers out there that might just work if we fake them... + */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/include/asm-arm/arch-aaec2000/irqs.h b/include/asm-arm/arch-aaec2000/irqs.h new file mode 100644 index 000000000000..de252220e806 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/irqs.h @@ -0,0 +1,46 @@ +/* + * linux/include/asm-arm/arch-aaec2000/irqs.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + + +#define INT_GPIOF0_FIQ 0 /* External GPIO Port F O Fast Interrupt Input */ +#define INT_BL_FIQ 1 /* Battery Low Fast Interrupt */ +#define INT_WE_FIQ 2 /* Watchdog Expired Fast Interrupt */ +#define INT_MV_FIQ 3 /* Media Changed Interrupt */ +#define INT_SC 4 /* Sound Codec Interrupt */ +#define INT_GPIO1 5 /* GPIO Port F Configurable Int 1 */ +#define INT_GPIO2 6 /* GPIO Port F Configurable Int 2 */ +#define INT_GPIO3 7 /* GPIO Port F Configurable Int 3 */ +#define INT_TMR1_OFL 8 /* Timer 1 Overflow Interrupt */ +#define INT_TMR2_OFL 9 /* Timer 2 Overflow Interrupt */ +#define INT_RTC_CM 10 /* RTC Compare Match Interrupt */ +#define INT_TICK 11 /* 64Hz Tick Interrupt */ +#define INT_UART1 12 /* UART1 Interrupt */ +#define INT_UART2 13 /* UART2 & Modem State Changed Interrupt */ +#define INT_LCD 14 /* LCD Interrupt */ +#define INT_SSI 15 /* SSI End of Transfer Interrupt */ +#define INT_UART3 16 /* UART3 Interrupt */ +#define INT_SCI 17 /* SCI Interrupt */ +#define INT_AAC 18 /* Advanced Audio Codec Interrupt */ +#define INT_MMC 19 /* MMC Interrupt */ +#define INT_USB 20 /* USB Interrupt */ +#define INT_DMA 21 /* DMA Interrupt */ +#define INT_TMR3_UOFL 22 /* Timer 3 Underflow Interrupt */ +#define INT_GPIO4 23 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO5 24 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO6 25 /* GPIO Port F Configurable Int 4 */ +#define INT_GPIO7 26 /* GPIO Port F Configurable Int 4 */ +#define INT_BMI 27 /* BMI Interrupt */ + +#define NR_IRQS (INT_BMI + 1) + +#endif /* __ASM_ARCH_IRQS_H */ diff --git a/include/asm-arm/arch-aaec2000/memory.h b/include/asm-arm/arch-aaec2000/memory.h new file mode 100644 index 000000000000..681b6a6171a1 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/memory.h @@ -0,0 +1,73 @@ +/* + * linux/include/asm-arm/arch-aaec2000/memory.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#include <linux/config.h> + +#define PHYS_OFFSET (0xf0000000UL) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#ifdef CONFIG_DISCONTIGMEM + +/* + * The nodes are the followings: + * + * node 0: 0xf000.0000 - 0xf3ff.ffff + * node 1: 0xf400.0000 - 0xf7ff.ffff + * node 2: 0xf800.0000 - 0xfbff.ffff + * node 3: 0xfc00.0000 - 0xffff.ffff + */ + +/* + * Given a kernel address, find the home node of the underlying memory. + */ +#define KVADDR_TO_NID(addr) \ + (((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MAX_MEM_SHIFT) + +/* + * Given a page frame number, convert it to a node id. + */ +#define PFN_TO_NID(pfn) \ + (((pfn) - PHYS_PFN_OFFSET) >> (NODE_MAX_MEM_SHIFT - PAGE_SHIFT)) + +/* + * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory + * and return the mem_map of that node. + */ +#define ADDR_TO_MAPBASE(kaddr) NODE_MEM_MAP(KVADDR_TO_NID(kaddr)) + +/* + * Given a page frame number, find the owning node of the memory + * and return the mem_map of that node. + */ +#define PFN_TO_MAPBASE(pfn) NODE_MEM_MAP(PFN_TO_NID(pfn)) + +/* + * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory + * and returns the index corresponding to the appropriate page in the + * node's mem_map. + */ +#define LOCAL_MAP_NR(addr) \ + (((unsigned long)(addr) & (NODE_MAX_MEM_SIZE - 1)) >> PAGE_SHIFT) + +#define NODE_MAX_MEM_SHIFT 26 +#define NODE_MAX_MEM_SIZE (1 << NODE_MAX_MEM_SHIFT) + +#else + +#define PFN_TO_NID(addr) (0) + +#endif /* CONFIG_DISCONTIGMEM */ + +#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/include/asm-arm/arch-aaec2000/param.h b/include/asm-arm/arch-aaec2000/param.h new file mode 100644 index 000000000000..139936c2faf2 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/param.h @@ -0,0 +1,15 @@ +/* + * linux/include/asm-arm/arch-aaec2000/param.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_PARAM_H +#define __ASM_ARCH_PARAM_H + +#endif /* __ASM_ARCH_PARAM_H */ + diff --git a/include/asm-arm/arch-aaec2000/system.h b/include/asm-arm/arch-aaec2000/system.h new file mode 100644 index 000000000000..08de97b407a8 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/system.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm-arm/arch-aaed2000/system.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + cpu_reset(0); +} + +#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/include/asm-arm/arch-aaec2000/timex.h b/include/asm-arm/arch-aaec2000/timex.h new file mode 100644 index 000000000000..f5708b38fb7f --- /dev/null +++ b/include/asm-arm/arch-aaec2000/timex.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/arch-aaec2000/timex.h + * + * AAEC-2000 Architecture timex specification + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 508000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/include/asm-arm/arch-aaec2000/uncompress.h b/include/asm-arm/arch-aaec2000/uncompress.h new file mode 100644 index 000000000000..fff0c94b75c4 --- /dev/null +++ b/include/asm-arm/arch-aaec2000/uncompress.h @@ -0,0 +1,47 @@ +/* + * linux/include/asm-arm/arch-aaec2000/uncompress.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include "hardware.h" + +#define UART(x) (*(volatile unsigned long *)(serial_port + (x))) + +static void putstr( const char *s ) +{ + unsigned long serial_port; + do { + serial_port = _UART3_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART1_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + serial_port = _UART2_BASE; + if (UART(UART_CR) & UART_CR_EN) break; + return; + } while (0); + + for (; *s; s++) { + /* wait for space in the UART's transmitter */ + while ((UART(UART_SR) & UART_SR_TxFF)); + /* send the character out. */ + UART(UART_DR) = *s; + /* if a LF, also do CR... */ + if (*s == 10) { + while ((UART(UART_SR) & UART_SR_TxFF)); + UART(UART_DR) = 13; + } + } +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/include/asm-arm/arch-aaec2000/vmalloc.h b/include/asm-arm/arch-aaec2000/vmalloc.h new file mode 100644 index 000000000000..ecb991e2e4ff --- /dev/null +++ b/include/asm-arm/arch-aaec2000/vmalloc.h @@ -0,0 +1,16 @@ +/* + * linux/include/asm-arm/arch-aaec2000/vmalloc.h + * + * Copyright (c) 2005 Nicolas Bellido Y Ortega + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (PAGE_OFFSET + 0x10000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h index bd364f5a99bc..96ad3d2a66d1 100644 --- a/include/asm-arm/arch-integrator/platform.h +++ b/include/asm-arm/arch-integrator/platform.h @@ -293,7 +293,11 @@ #define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET) +#if defined(CONFIG_ARCH_INTEGRATOR_AP) #define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */ +#elif defined(CONFIG_ARCH_INTEGRATOR_CP) +#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */ +#endif /* ------------------------------------------------------------------------ * KMI keyboard/mouse definitions diff --git a/include/asm-arm/arch-integrator/smp.h b/include/asm-arm/arch-integrator/smp.h new file mode 100644 index 000000000000..0ec7093f7c37 --- /dev/null +++ b/include/asm-arm/arch-integrator/smp.h @@ -0,0 +1,19 @@ +#ifndef ASMARM_ARCH_SMP_H +#define ASMARM_ARCH_SMP_H + +#include <linux/config.h> + +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#define hard_smp_processor_id() \ + ({ \ + unsigned int cpunum; \ + __asm__("mrc p15, 0, %0, c0, c0, 5" \ + : "=r" (cpunum)); \ + cpunum &= 0x0F; \ + }) + +extern void secondary_scan_irqs(void); + +#endif diff --git a/include/asm-arm/arch-ixp2000/gpio.h b/include/asm-arm/arch-ixp2000/gpio.h index 84634af5cc64..03cbbe1fd9d8 100644 --- a/include/asm-arm/arch-ixp2000/gpio.h +++ b/include/asm-arm/arch-ixp2000/gpio.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/arch-ixp2000/ixp2000-gpio.h + * include/asm-arm/arch-ixp2000/gpio.h * * Copyright (C) 2002 Intel Corporation. * @@ -16,26 +16,18 @@ * Use this instead of directly setting the GPIO registers. * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb) */ -#ifndef _ASM_ARCH_IXP2000_GPIO_H_ -#define _ASM_ARCH_IXP2000_GPIO_H_ +#ifndef __ASM_ARCH_GPIO_H +#define __ASM_ARCH_GPIO_H #ifndef __ASSEMBLY__ -#define GPIO_OUT 0x0 -#define GPIO_IN 0x80 + +#define GPIO_IN 0 +#define GPIO_OUT 1 #define IXP2000_GPIO_LOW 0 #define IXP2000_GPIO_HIGH 1 -#define GPIO_NO_EDGES 0 -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 -#define GPIO_LEVEL_LOW 4 -#define GPIO_LEVEL_HIGH 8 - -extern void set_GPIO_IRQ_edge(int gpio_nr, int edge); -extern void set_GPIO_IRQ_level(int gpio_nr, int level); -extern void gpio_line_config(int line, int style); +extern void gpio_line_config(int line, int direction); static inline int gpio_line_get(int line) { @@ -45,11 +37,12 @@ static inline int gpio_line_get(int line) static inline void gpio_line_set(int line, int value) { if (value == IXP2000_GPIO_HIGH) { - ixp_reg_write(IXP2000_GPIO_POSR, BIT(line)); - } else if (value == IXP2000_GPIO_LOW) - ixp_reg_write(IXP2000_GPIO_POCR, BIT(line)); + ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line); + } else if (value == IXP2000_GPIO_LOW) { + ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line); + } } #endif /* !__ASSEMBLY__ */ -#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ +#endif /* ASM_ARCH_IXP2000_GPIO_H_ */ diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h index a8e3c2daefd6..3241cd6f0778 100644 --- a/include/asm-arm/arch-ixp2000/io.h +++ b/include/asm-arm/arch-ixp2000/io.h @@ -17,18 +17,23 @@ #define IO_SPACE_LIMIT 0xffffffff #define __mem_pci(a) (a) -#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) /* - * The IXP2400 before revision B0 asserts byte lanes for PCI I/O + * The A? revisions of the IXP2000s assert byte lanes for PCI I/O * transactions the other way round (MEM transactions don't have this - * issue), so we need to override the standard functions. B0 and later - * have a bit that can be set to 1 to get the 'proper' behavior, but - * since that isn't available on the A? revisions we just keep doing - * things manually. + * issue), so if we want to support those models, we need to override + * the standard I/O functions. + * + * B0 and later have a bit that can be set to 1 to get the proper + * behavior for I/O transactions, which then allows us to use the + * standard I/O functions. This is what we do if the user does not + * explicitly ask for support for pre-B0. */ -#define alignb(addr) (void __iomem *)((unsigned long)addr ^ 3) -#define alignw(addr) (void __iomem *)((unsigned long)addr ^ 2) +#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO +#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) + +#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3) +#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2) #define outb(v,p) __raw_writeb((v),alignb(___io(p))) #define outw(v,p) __raw_writew((v),alignw(___io(p))) @@ -48,6 +53,81 @@ #define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l) #define insl(p,d,l) __raw_readsl(___io(p),d,l) +#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE) + +#define ioread8(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readb(alignb(p)); \ + } else { \ + __v = __raw_readb(p); \ + } \ + \ + __v; \ + }) \ + +#define ioread16(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readw(alignw(p)); \ + } else { \ + __v = le16_to_cpu(__raw_readw(p)); \ + } \ + \ + __v; \ + }) + +#define ioread32(p) \ + ({ \ + unsigned int __v; \ + \ + if (__is_io_address(p)) { \ + __v = __raw_readl(p); \ + } else { \ + __v = le32_to_cpu(__raw_readl(p)); \ + } \ + \ + __v; \ + }) + +#define iowrite8(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writeb((v), alignb(p)); \ + } else { \ + __raw_writeb((v), p); \ + } \ + }) + +#define iowrite16(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writew((v), alignw(p)); \ + } else { \ + __raw_writew(cpu_to_le16(v), p); \ + } \ + }) + +#define iowrite32(v,p) \ + ({ \ + if (__is_io_address(p)) { \ + __raw_writel((v), p); \ + } else { \ + __raw_writel(cpu_to_le32(v), p); \ + } \ + }) + +#define ioport_map(port, nr) ___io(port) + +#define ioport_unmap(addr) +#else +#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE)) +#endif + #ifdef CONFIG_ARCH_IXDP2X01 /* @@ -75,8 +155,8 @@ static inline void insw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { u8 *buf8 = (u8*)buf; register u32 tmp32; @@ -100,8 +180,8 @@ static inline void outsw(u32 ptr, void *buf, int length) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { register u32 tmp32; u8 *buf8 = (u8*)buf; do { @@ -124,8 +204,8 @@ static inline u16 inw(u32 ptr) * Is this cycle meant for the CS8900? */ if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { return (u16)(*port); } @@ -137,8 +217,8 @@ static inline void outw(u16 value, u32 ptr) register volatile u32 *port = (volatile u32 *)ptr; if ((machine_is_ixdp2401() || machine_is_ixdp2801()) && - ((port >= IXDP2X01_CS8900_VIRT_BASE) && - (port <= IXDP2X01_CS8900_VIRT_END))) { + (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) && + ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) { *port = value; return; } diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index 6c56708d0ff0..5eb47d4bfbf6 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -241,7 +241,7 @@ #define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */ #define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */ #define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */ -#define PCI_CONTROL_PNR (1 << 17) /* PCI Not Reset bit */ +#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */ #define IXP2000_PCI_RST_REL (1 << 2) #define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF) @@ -363,6 +363,7 @@ #define IXP2000_MIN_REV_MASK 0x0000000F #define IXP2000_PROD_ID_MASK 0xFFFFFFFF +#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00) #define IXP2000_MISC_CONTROL GLOBAL_REG(0x04) #define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08) #define IXP2000_RESET0 GLOBAL_REG(0x0c) diff --git a/include/asm-arm/arch-ixp2000/platform.h b/include/asm-arm/arch-ixp2000/platform.h index 901bba6d02b4..52ded516ea5c 100644 --- a/include/asm-arm/arch-ixp2000/platform.h +++ b/include/asm-arm/arch-ixp2000/platform.h @@ -138,30 +138,10 @@ struct ixp2000_flash_data { unsigned long (*bank_setup)(unsigned long); }; -/* - * GPIO helper functions - */ -#define GPIO_IN 0 -#define GPIO_OUT 1 - -extern void gpio_line_config(int line, int style); - -static inline int gpio_line_get(int line) -{ - return (((*IXP2000_GPIO_PLR) >> line) & 1); -} - -static inline void gpio_line_set(int line, int value) -{ - if (value) - ixp2000_reg_write(IXP2000_GPIO_POSR, (1 << line)); - else - ixp2000_reg_write(IXP2000_GPIO_POCR, (1 << line)); -} - struct ixp2000_i2c_pins { unsigned long sda_pin; unsigned long scl_pin; }; + #endif /* !__ASSEMBLY__ */ diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S index 4499ae8e4b44..45a6c6cc29d5 100644 --- a/include/asm-arm/arch-ixp4xx/debug-macro.S +++ b/include/asm-arm/arch-ixp4xx/debug-macro.S @@ -14,6 +14,7 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0xc8000000 + orrne \rx, \rx, #0x00b00000 movne \rx, #0xff000000 add \rx,\rx,#3 @ Uart regs are at off set of 3 if @ byte writes used - Big Endian. diff --git a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h index 8eeb1db6309d..004696a95bdb 100644 --- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h +++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h @@ -69,6 +69,16 @@ #define IXP4XX_PERIPHERAL_BASE_VIRT (0xFFBF2000) #define IXP4XX_PERIPHERAL_REGION_SIZE (0x0000C000) +/* + * Debug UART + * + * This is basically a remap of UART1 into a region that is section + * aligned so that it * can be used with the low-level debug code. + */ +#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) +#define IXP4XX_DEBUG_UART_BASE_VIRT (0xffb00000) +#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) + #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 #define IXP4XX_EXP_CS2_OFFSET 0x08 diff --git a/include/asm-arm/arch-omap/tps65010.h b/include/asm-arm/arch-omap/tps65010.h index 0f97bb2e8fce..b9aa2b3a3909 100644 --- a/include/asm-arm/arch-omap/tps65010.h +++ b/include/asm-arm/arch-omap/tps65010.h @@ -30,6 +30,66 @@ /* * ---------------------------------------------------------------------------- + * Registers, all 8 bits + * ---------------------------------------------------------------------------- + */ + +#define TPS_CHGSTATUS 0x01 +# define TPS_CHG_USB (1 << 7) +# define TPS_CHG_AC (1 << 6) +# define TPS_CHG_THERM (1 << 5) +# define TPS_CHG_TERM (1 << 4) +# define TPS_CHG_TAPER_TMO (1 << 3) +# define TPS_CHG_CHG_TMO (1 << 2) +# define TPS_CHG_PRECHG_TMO (1 << 1) +# define TPS_CHG_TEMP_ERR (1 << 0) +#define TPS_REGSTATUS 0x02 +# define TPS_REG_ONOFF (1 << 7) +# define TPS_REG_COVER (1 << 6) +# define TPS_REG_UVLO (1 << 5) +# define TPS_REG_NO_CHG (1 << 4) /* tps65013 */ +# define TPS_REG_PG_LD02 (1 << 3) +# define TPS_REG_PG_LD01 (1 << 2) +# define TPS_REG_PG_MAIN (1 << 1) +# define TPS_REG_PG_CORE (1 << 0) +#define TPS_MASK1 0x03 +#define TPS_MASK2 0x04 +#define TPS_ACKINT1 0x05 +#define TPS_ACKINT2 0x06 +#define TPS_CHGCONFIG 0x07 +# define TPS_CHARGE_POR (1 << 7) /* 65010/65012 */ +# define TPS65013_AUA (1 << 7) /* 65011/65013 */ +# define TPS_CHARGE_RESET (1 << 6) +# define TPS_CHARGE_FAST (1 << 5) +# define TPS_CHARGE_CURRENT (3 << 3) +# define TPS_VBUS_500MA (1 << 2) +# define TPS_VBUS_CHARGING (1 << 1) +# define TPS_CHARGE_ENABLE (1 << 0) +#define TPS_LED1_ON 0x08 +#define TPS_LED1_PER 0x09 +#define TPS_LED2_ON 0x0a +#define TPS_LED2_PER 0x0b +#define TPS_VDCDC1 0x0c +# define TPS_ENABLE_LP (1 << 3) +#define TPS_VDCDC2 0x0d +#define TPS_VREGS1 0x0e +# define TPS_LDO2_ENABLE (1 << 7) +# define TPS_LDO2_OFF (1 << 6) +# define TPS_VLDO2_3_0V (3 << 4) +# define TPS_VLDO2_2_75V (2 << 4) +# define TPS_VLDO2_2_5V (1 << 4) +# define TPS_VLDO2_1_8V (0 << 4) +# define TPS_LDO1_ENABLE (1 << 3) +# define TPS_LDO1_OFF (1 << 2) +# define TPS_VLDO1_3_0V (3 << 0) +# define TPS_VLDO1_2_75V (2 << 0) +# define TPS_VLDO1_2_5V (1 << 0) +# define TPS_VLDO1_ADJ (0 << 0) +#define TPS_MASK3 0x0f +#define TPS_DEFGPIO 0x10 + +/* + * ---------------------------------------------------------------------------- * Macros used by exported functions * ---------------------------------------------------------------------------- */ @@ -71,10 +131,26 @@ extern int tps65010_set_gpio_out_value(unsigned gpio, unsigned value); */ extern int tps65010_set_led(unsigned led, unsigned mode); +/* tps65010_set_vib parameter: + * value: ON or OFF + */ +extern int tps65010_set_vib(unsigned value); + /* tps65010_set_low_pwr parameter: * mode: ON or OFF */ extern int tps65010_set_low_pwr(unsigned mode); +/* tps65010_config_vregs1 parameter: + * value to be written to VREGS1 register + * Note: The complete register is written, set all bits you need + */ +extern int tps65010_config_vregs1(unsigned value); + +/* tps65013_set_low_pwr parameter: + * mode: ON or OFF + */ +extern int tps65013_set_low_pwr(unsigned mode); + #endif /* __ASM_ARCH_TPS65010_H */ diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 39741d3c9a34..b5e54a9e9fa7 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -1296,6 +1296,7 @@ #define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */ #define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */ #define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */ +#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */ #define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */ /* GPIO alternate function mode & direction */ @@ -1428,6 +1429,7 @@ #define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT) #define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT) #define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT) +#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT) #define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT) #define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT) #define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN) diff --git a/include/asm-arm/arch-versatile/hardware.h b/include/asm-arm/arch-versatile/hardware.h index d5fb4a251e7f..41c1bee342ad 100644 --- a/include/asm-arm/arch-versatile/hardware.h +++ b/include/asm-arm/arch-versatile/hardware.h @@ -25,19 +25,26 @@ #include <asm/sizes.h> #include <asm/arch/platform.h> -// FIXME = PCI settings need to be fixed!!!!! - /* - * Similar to above, but for PCI addresses (memory, IO, Config and the - * V3 chip itself). WARNING: this has to mirror definitions in platform.h + * PCI space virtual addresses */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 +#define VERSATILE_PCI_VIRT_BASE 0xe8000000 +#define VERSATILE_PCI_CFG_VIRT_BASE 0xe9000000 + +#if 0 +#define VERSATILE_PCI_VIRT_MEM_BASE0 0xf4000000 +#define VERSATILE_PCI_VIRT_MEM_BASE1 0xf5000000 +#define VERSATILE_PCI_VIRT_MEM_BASE2 0xf6000000 + +#define PCIO_BASE VERSATILE_PCI_VIRT_MEM_BASE0 +#define PCIMEM_BASE VERSATILE_PCI_VIRT_MEM_BASE1 +#endif + +/* CIK guesswork */ +#define PCIBIOS_MIN_IO 0x44000000 +#define PCIBIOS_MIN_MEM 0x50000000 -#define PCIO_BASE PCI_IO_VADDR -#define PCIMEM_BASE PCI_MEMORY_VADDR +#define pcibios_assign_all_busses() 1 /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) diff --git a/include/asm-arm/arch-versatile/io.h b/include/asm-arm/arch-versatile/io.h index dbb7158788fc..9f895bf61494 100644 --- a/include/asm-arm/arch-versatile/io.h +++ b/include/asm-arm/arch-versatile/io.h @@ -20,7 +20,7 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff +#define IO_SPACE_LIMIT 0xffffffff #define __io(a) ((void __iomem *)(a)) #define __mem_pci(a) (a) diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h index 2598d1f08548..cbdd9fb96332 100644 --- a/include/asm-arm/arch-versatile/platform.h +++ b/include/asm-arm/arch-versatile/platform.h @@ -76,7 +76,7 @@ #define VERSATILE_SYS_NVFLAGSSET_OFFSET 0x38 #define VERSATILE_SYS_NVFLAGSCLR_OFFSET 0x3C #define VERSATILE_SYS_RESETCTL_OFFSET 0x40 -#define VERSATILE_SYS_PICCTL_OFFSET 0x44 +#define VERSATILE_SYS_PCICTL_OFFSET 0x44 #define VERSATILE_SYS_MCI_OFFSET 0x48 #define VERSATILE_SYS_FLASH_OFFSET 0x4C #define VERSATILE_SYS_CLCD_OFFSET 0x50 @@ -114,7 +114,7 @@ #define VERSATILE_SYS_NVFLAGSSET (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET) #define VERSATILE_SYS_NVFLAGSCLR (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET) #define VERSATILE_SYS_RESETCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET) -#define VERSATILE_SYS_PICCTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PICCTL_OFFSET) +#define VERSATILE_SYS_PCICTL (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET) #define VERSATILE_SYS_MCI (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET) #define VERSATILE_SYS_FLASH (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET) #define VERSATILE_SYS_CLCD (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET) @@ -225,7 +225,20 @@ #define VERSATILE_SSMC_BASE 0x20000000 /* SSMC */ #define VERSATILE_IB2_BASE 0x24000000 /* IB2 module */ #define VERSATILE_MBX_BASE 0x40000000 /* MBX */ + +/* PCI space */ #define VERSATILE_PCI_BASE 0x41000000 /* PCI Interface */ +#define VERSATILE_PCI_CFG_BASE 0x42000000 +#define VERSATILE_PCI_MEM_BASE0 0x44000000 +#define VERSATILE_PCI_MEM_BASE1 0x50000000 +#define VERSATILE_PCI_MEM_BASE2 0x60000000 +/* Sizes of above maps */ +#define VERSATILE_PCI_BASE_SIZE 0x01000000 +#define VERSATILE_PCI_CFG_BASE_SIZE 0x02000000 +#define VERSATILE_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ +#define VERSATILE_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ +#define VERSATILE_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ + #define VERSATILE_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ #define VERSATILE_LT_BASE 0x80000000 /* Logic Tile expansion */ @@ -498,11 +511,17 @@ /* * IB2 Versatile/AB expansion board definitions */ -#define VERSATILE_IB2_CAMERA_BANK 0x24000000 -#define VERSATILE_IB2_KBD_DATAREG 0x25000000 -#define VERSATILE_IB2_IER 0x26000000 /* for VICINTSOURCE27 */ -#define VERSATILE_IB2_CTRL 0x27000000 -#define VERSATILE_IB2_STAT 0x27000004 +#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE +#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000) + +/* VICINTSOURCE27 */ +#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000) +#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0) +#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4) + +#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000) +#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0) +#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4) #endif #endif diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h index 09ffeed507c2..035cdcff43d2 100644 --- a/include/asm-arm/cacheflush.h +++ b/include/asm-arm/cacheflush.h @@ -16,6 +16,9 @@ #include <asm/mman.h> #include <asm/glue.h> +#include <asm/shmparam.h> + +#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) /* * Cache Model diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h index cbceacbe5afa..a1696ba238d3 100644 --- a/include/asm-arm/elf.h +++ b/include/asm-arm/elf.h @@ -38,9 +38,9 @@ typedef struct user_fp elf_fpregset_t; */ #define ELF_CLASS ELFCLASS32 #ifdef __ARMEB__ -#define ELF_DATA ELFDATA2MSB; +#define ELF_DATA ELFDATA2MSB #else -#define ELF_DATA ELFDATA2LSB; +#define ELF_DATA ELFDATA2LSB #endif #define ELF_ARCH EM_ARM diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 658ffa384fda..cc4b5f5dbfcf 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -273,6 +273,35 @@ extern void __iounmap(void __iomem *addr); #endif /* + * io{read,write}{8,16,32} macros + */ +#ifndef ioread8 +#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; }) +#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; }) +#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; }) + +#define iowrite8(v,p) __raw_writeb(v, p) +#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p) +#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p) + +#define ioread8_rep(p,d,c) __raw_readsb(p,d,c) +#define ioread16_rep(p,d,c) __raw_readsw(p,d,c) +#define ioread32_rep(p,d,c) __raw_readsl(p,d,c) + +#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c) +#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c) +#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c) + +extern void __iomem *ioport_map(unsigned long port, unsigned int nr); +extern void ioport_unmap(void __iomem *addr); +#endif + +struct pci_dev; + +extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen); +extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr); + +/* * can the hardware map this into one segment or not, given no other * constraints. */ diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h index 5cf4fd659fd5..047980ad18d1 100644 --- a/include/asm-arm/mach/time.h +++ b/include/asm-arm/mach/time.h @@ -39,8 +39,29 @@ struct sys_timer { void (*suspend)(void); void (*resume)(void); unsigned long (*offset)(void); + +#ifdef CONFIG_NO_IDLE_HZ + struct dyn_tick_timer *dyn_tick; +#endif +}; + +#ifdef CONFIG_NO_IDLE_HZ + +#define DYN_TICK_SKIPPING (1 << 2) +#define DYN_TICK_ENABLED (1 << 1) +#define DYN_TICK_SUITABLE (1 << 0) + +struct dyn_tick_timer { + unsigned int state; /* Current state */ + int (*enable)(void); /* Enables dynamic tick */ + int (*disable)(void); /* Disables dynamic tick */ + void (*reprogram)(unsigned long); /* Reprograms the timer */ + int (*handler)(int, void *, struct pt_regs *); }; +void timer_dyn_reprogram(void); +#endif + extern struct sys_timer *system_timer; extern void timer_tick(struct pt_regs *); diff --git a/include/asm-arm/pgalloc.h b/include/asm-arm/pgalloc.h index e814f8144f8b..bc18ff405181 100644 --- a/include/asm-arm/pgalloc.h +++ b/include/asm-arm/pgalloc.h @@ -89,6 +89,13 @@ static inline void pte_free(struct page *pte) __free_page(pte); } +static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval) +{ + pmdp[0] = __pmd(pmdval); + pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); + flush_pmd_entry(pmdp); +} + /* * Populate the pmdp entry with a pointer to the pte. This pmd is part * of the mm address space. @@ -99,32 +106,19 @@ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) { unsigned long pte_ptr = (unsigned long)ptep; - unsigned long pmdval; - - BUG_ON(mm != &init_mm); /* * The pmd must be loaded with the physical * address of the PTE table */ pte_ptr -= PTRS_PER_PTE * sizeof(void *); - pmdval = __pa(pte_ptr) | _PAGE_KERNEL_TABLE; - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); + __pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE); } static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmdp, struct page *ptep) { - unsigned long pmdval; - - BUG_ON(mm == &init_mm); - - pmdval = page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE; - pmdp[0] = __pmd(pmdval); - pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); - flush_pmd_entry(pmdp); + __pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE); } #endif diff --git a/include/asm-arm/signal.h b/include/asm-arm/signal.h index 46e69ae395af..760f6e65af05 100644 --- a/include/asm-arm/signal.h +++ b/include/asm-arm/signal.h @@ -114,6 +114,7 @@ typedef unsigned long sigset_t; #define SIGSTKSZ 8192 #ifdef __KERNEL__ +#define SA_TIMER 0x40000000 #define SA_IRQNOMASK 0x08000000 #endif diff --git a/include/asm-arm/smp.h b/include/asm-arm/smp.h index f21fd8f6bcdd..6c6c60adbbaa 100644 --- a/include/asm-arm/smp.h +++ b/include/asm-arm/smp.h @@ -21,7 +21,7 @@ # error "<asm-arm/smp.h> included in non-SMP build" #endif -#define smp_processor_id() (current_thread_info()->cpu) +#define raw_smp_processor_id() (current_thread_info()->cpu) extern cpumask_t cpu_present_mask; #define cpu_possible_map cpu_present_mask @@ -55,4 +55,18 @@ extern void smp_cross_call(cpumask_t callmap); */ extern int boot_secondary(unsigned int cpu, struct task_struct *); +/* + * Perform platform specific initialisation of the specified CPU. + */ +extern void platform_secondary_init(unsigned int cpu); + +/* + * Initial data for bringing up a secondary CPU. + */ +struct secondary_data { + unsigned long pgdir; + void *stack; +}; +extern struct secondary_data secondary_data; + #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index b13a8da4847b..3d0d2860b6db 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -104,6 +104,7 @@ extern void show_pte(struct mm_struct *mm, unsigned long addr); extern void __show_regs(struct pt_regs *); extern int cpu_architecture(void); +extern void cpu_init(void); #define set_cr(x) \ __asm__ __volatile__( \ @@ -144,34 +145,12 @@ extern unsigned int user_debug; #define set_wmb(var, value) do { var = value; wmb(); } while (0) #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); -#ifdef CONFIG_SMP /* - * Define our own context switch locking. This allows us to enable - * interrupts over the context switch, otherwise we end up with high - * interrupt latency. The real problem area is switch_mm() which may - * do a full cache flush. + * switch_mm() may do a full cache flush over the context switch, + * so enable interrupts over the context switch to avoid high + * latency. */ -#define prepare_arch_switch(rq,next) \ -do { \ - spin_lock(&(next)->switch_lock); \ - spin_unlock_irq(&(rq)->lock); \ -} while (0) - -#define finish_arch_switch(rq,prev) \ - spin_unlock(&(prev)->switch_lock) - -#define task_running(rq,p) \ - ((rq)->curr == (p) || spin_is_locked(&(p)->switch_lock)) -#else -/* - * Our UP-case is more simple, but we assume knowledge of how - * spin_unlock_irq() and friends are implemented. This avoids - * us needlessly decrementing and incrementing the preempt count. - */ -#define prepare_arch_switch(rq,next) local_irq_enable() -#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock) -#define task_running(rq,p) ((rq)->curr == (p)) -#endif +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW /* * switch_to(prev, next) should switch from task `prev' to `next' @@ -307,7 +286,7 @@ do { \ ({ \ unsigned long flags; \ local_save_flags(flags); \ - flags & PSR_I_BIT; \ + (int)(flags & PSR_I_BIT); \ }) #ifdef CONFIG_SMP diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index 66c585c50cf9..8252a4cd860f 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -49,7 +49,7 @@ struct cpu_context_save { */ struct thread_info { unsigned long flags; /* low level flags */ - __s32 preempt_count; /* 0 => preemptable, <0 => bug */ + int preempt_count; /* 0 => preemptable, <0 => bug */ mm_segment_t addr_limit; /* address limit */ struct task_struct *task; /* main task structure */ struct exec_domain *exec_domain; /* execution domain */ |
