summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-omap/omapfb.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-omap/omapfb.h')
-rw-r--r--include/asm-arm/arch-omap/omapfb.h281
1 files changed, 281 insertions, 0 deletions
diff --git a/include/asm-arm/arch-omap/omapfb.h b/include/asm-arm/arch-omap/omapfb.h
new file mode 100644
index 000000000000..4ba2622cc142
--- /dev/null
+++ b/include/asm-arm/arch-omap/omapfb.h
@@ -0,0 +1,281 @@
+/*
+ * File: include/asm-arm/arch-omap/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype) _IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype) _IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype)
+#define OMAP_IO(num) _IO('O', num)
+
+#define OMAPFB_MIRROR OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX OMAP_IO(37)
+#define OMAPFB_VSYNC OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, enum omapfb_update_mode)
+#define OMAPFB_GET_CAPS OMAP_IOR(42, unsigned long)
+#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, enum omapfb_update_mode)
+#define OMAPFB_LCD_TEST OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW OMAP_IOW(47, struct omapfb_update_window)
+#define OMAPFB_SETUP_PLANE OMAP_IOW(48, struct omapfb_setup_plane)
+#define OMAPFB_ENABLE_PLANE OMAP_IOW(49, struct omapfb_enable_plane)
+#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key)
+
+#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK 0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK 0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000
+#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK 0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100
+
+enum omapfb_color_format {
+ OMAPFB_COLOR_RGB565 = 0,
+ OMAPFB_COLOR_YUV422,
+ OMAPFB_COLOR_YUV420,
+ OMAPFB_COLOR_CLUT_8BPP,
+ OMAPFB_COLOR_CLUT_4BPP,
+ OMAPFB_COLOR_CLUT_2BPP,
+ OMAPFB_COLOR_CLUT_1BPP,
+};
+
+struct omapfb_update_window {
+ u32 x, y;
+ u32 width, height;
+ u32 format;
+};
+
+enum omapfb_plane {
+ OMAPFB_PLANE_GFX = 0,
+ OMAPFB_PLANE_VID1,
+ OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+ OMAPFB_CHANNEL_OUT_LCD = 0,
+ OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_setup_plane {
+ u8 plane;
+ u8 channel_out;
+ u32 offset;
+ u32 pos_x, pos_y;
+ u32 width, height;
+ u32 color_mode;
+};
+
+struct omapfb_enable_plane {
+ u8 plane;
+ u8 enable;
+};
+
+enum omapfb_color_key_type {
+ OMAPFB_COLOR_KEY_DISABLED = 0,
+ OMAPFB_COLOR_KEY_GFX_DST,
+ OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+ u8 channel_out;
+ u32 background;
+ u32 trans_key;
+ u8 key_type;
+};
+
+enum omapfb_update_mode {
+ OMAPFB_UPDATE_DISABLED = 0,
+ OMAPFB_AUTO_UPDATE,
+ OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+
+#define OMAP_LCDC_INV_VSYNC 0x0001
+#define OMAP_LCDC_INV_HSYNC 0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK 0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN 0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE 0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK 0x003f
+
+#define OMAP_LCDC_PANEL_TFT 0x0100
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM 1
+#else
+#define OMAPFB_PLANE_NUM 3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+ const char *name;
+ int config; /* TFT/STN, signal inversion */
+ int bpp; /* Pixel format in fb mem */
+ int data_lines; /* Lines on LCD HW interface */
+
+ int x_res, y_res;
+ int pixel_clock; /* In kHz */
+ int hsw; /* Horizontal synchronization
+ pulse width */
+ int hfp; /* Horizontal front porch */
+ int hbp; /* Horizontal back porch */
+ int vsw; /* Vertical synchronization
+ pulse width */
+ int vfp; /* Vertical front porch */
+ int vbp; /* Vertical back porch */
+ int acb; /* ac-bias pin frequency */
+ int pcd; /* pixel clock divider.
+ Obsolete use pixel_clock instead */
+
+ int (*init) (struct omapfb_device *fbdev);
+ void (*cleanup) (void);
+ int (*enable) (void);
+ void (*disable) (void);
+ unsigned long (*get_caps) (void);
+ int (*set_bklight_level)(unsigned int level);
+ unsigned int (*get_bklight_level)(void);
+ unsigned int (*get_bklight_max) (void);
+ int (*run_test) (int test_num);
+};
+
+struct omapfb_device;
+
+struct extif_timings {
+ int cs_on_time;
+ int cs_off_time;
+ int we_on_time;
+ int we_off_time;
+ int re_on_time;
+ int re_off_time;
+ int we_cycle_time;
+ int re_cycle_time;
+ int cs_pulse_width;
+ int access_time;
+};
+
+struct lcd_ctrl_extif {
+ int (*init) (void);
+ void (*cleanup) (void);
+ void (*set_timings) (const struct extif_timings *timings);
+ void (*write_command) (u32 cmd);
+ u32 (*read_data) (void);
+ void (*write_data) (u32 data);
+ void (*transfer_area) (int width, int height,
+ void (callback)(void * data), void *data);
+};
+
+struct lcd_ctrl {
+ const char *name;
+ void *data;
+
+ int (*init) (struct omapfb_device *fbdev,
+ int ext_mode, int req_vram_size);
+ void (*cleanup) (void);
+ void (*get_vram_layout)(unsigned long *size,
+ void **virt_base,
+ dma_addr_t *phys_base);
+ unsigned long (*get_caps) (void);
+ int (*set_update_mode)(enum omapfb_update_mode mode);
+ enum omapfb_update_mode (*get_update_mode)(void);
+ int (*setup_plane) (int plane, int channel_out,
+ unsigned long offset,
+ int screen_width,
+ int pos_x, int pos_y, int width,
+ int height, int color_mode);
+ int (*enable_plane) (int plane, int enable);
+ int (*update_window) (struct omapfb_update_window *win,
+ void (*callback)(void *),
+ void *callback_data);
+ void (*sync) (void);
+ void (*suspend) (void);
+ void (*resume) (void);
+ int (*run_test) (int test_num);
+ int (*setcolreg) (u_int regno, u16 red, u16 green,
+ u16 blue, u16 transp,
+ int update_hw_mem);
+ int (*set_color_key) (struct omapfb_color_key *ck);
+
+};
+
+enum omapfb_state {
+ OMAPFB_DISABLED = 0,
+ OMAPFB_SUSPENDED= 99,
+ OMAPFB_ACTIVE = 100
+};
+
+struct omapfb_device {
+ int state;
+ int ext_lcdc; /* Using external
+ LCD controller */
+ struct semaphore rqueue_sema;
+
+ void *vram_virt_base;
+ dma_addr_t vram_phys_base;
+ unsigned long vram_size;
+
+ int color_mode;
+ int palette_size;
+ int mirror;
+ u32 pseudo_palette[17];
+
+ struct lcd_panel *panel; /* LCD panel */
+ struct lcd_ctrl *ctrl; /* LCD controller */
+ struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */
+ struct lcd_ctrl_extif *ext_if; /* LCD ctrl external
+ interface */
+ struct fb_info *fb_info;
+
+ struct device *dev;
+};
+
+extern struct lcd_panel h3_panel;
+extern struct lcd_panel h2_panel;
+extern struct lcd_panel p2_panel;
+extern struct lcd_panel osk_panel;
+extern struct lcd_panel innovator1610_panel;
+extern struct lcd_panel innovator1510_panel;
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
OpenPOWER on IntegriCloud