diff options
Diffstat (limited to 'include/asm-arm/arch-omap/hardware.h')
| -rw-r--r-- | include/asm-arm/arch-omap/hardware.h | 324 |
1 files changed, 324 insertions, 0 deletions
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h new file mode 100644 index 000000000000..37e06c782bdf --- /dev/null +++ b/include/asm-arm/arch-omap/hardware.h @@ -0,0 +1,324 @@ +/* + * linux/include/asm-arm/arch-omap/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> + * + * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> + * and Dirk Behme <dirk.behme@de.bosch.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H + +#include <asm/sizes.h> +#include <linux/config.h> +#ifndef __ASSEMBLER__ +#include <asm/types.h> +#include <asm/arch/cpu.h> +#endif +#include <asm/arch/io.h> + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control */ +#define DSP_CONFIG_REG_BASE (0xe1008000) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +#ifndef __ASSEMBLER__ + +/* + * --------------------------------------------------------------------------- + * Serial ports + * --------------------------------------------------------------------------- + */ +#define OMAP_UART1_BASE (unsigned char *)0xfffb0000 +#define OMAP_UART2_BASE (unsigned char *)0xfffb0800 +#define OMAP_UART3_BASE (unsigned char *)0xfffb9800 +#define OMAP_MAX_NR_PORTS 3 +#define OMAP1510_BASE_BAUD (12000000/16) +#define OMAP16XX_BASE_BAUD (48000000/16) + +#define is_omap_port(p) ({int __ret = 0; \ + if (p == IO_ADDRESS(OMAP_UART1_BASE) || \ + p == IO_ADDRESS(OMAP_UART2_BASE) || \ + p == IO_ADDRESS(OMAP_UART3_BASE)) \ + __ret = 1; \ + __ret; \ + }) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP730 +#include "omap730.h" +#endif + +#ifdef CONFIG_ARCH_OMAP1510 +#include "omap1510.h" +#endif + +#ifdef CONFIG_ARCH_OMAP16XX +#include "omap16xx.h" +#endif + +/* + * --------------------------------------------------------------------------- + * Board specific defines + * --------------------------------------------------------------------------- + */ + +#ifdef CONFIG_MACH_OMAP_INNOVATOR +#include "board-innovator.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H2 +#include "board-h2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_PERSEUS2 +#include "board-perseus2.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H3 +#include "board-h3.h" +#endif + +#ifdef CONFIG_MACH_OMAP_H4 +#include "board-h4.h" +#error "Support for H4 board not yet implemented." +#endif + +#ifdef CONFIG_MACH_OMAP_OSK +#include "board-osk.h" +#endif + +#ifdef CONFIG_MACH_VOICEBLUE +#include "board-voiceblue.h" +#endif + +#ifdef CONFIG_MACH_NETSTAR +#include "board-netstar.h" +#endif + +#endif /* !__ASSEMBLER__ */ + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ |
