diff options
Diffstat (limited to 'include/asm-arm/arch-omap/board.h')
| -rw-r--r-- | include/asm-arm/arch-omap/board.h | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h deleted file mode 100644 index db44c5d1f1a0..000000000000 --- a/include/asm-arm/arch-omap/board.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/board.h - * - * Information structures for board-specific data - * - * Copyright (C) 2004 Nokia Corporation - * Written by Juha Yrjölä <juha.yrjola@nokia.com> - */ - -#ifndef _OMAP_BOARD_H -#define _OMAP_BOARD_H - -#include <linux/types.h> - -#include <asm/arch/gpio-switch.h> - -/* Different peripheral ids */ -#define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_MMC 0x4f02 -#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 -#define OMAP_TAG_USB 0x4f04 -#define OMAP_TAG_LCD 0x4f05 -#define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_UART 0x4f07 -#define OMAP_TAG_FBMEM 0x4f08 -#define OMAP_TAG_STI_CONSOLE 0x4f09 -#define OMAP_TAG_CAMERA_SENSOR 0x4f0a - -#define OMAP_TAG_BOOT_REASON 0x4f80 -#define OMAP_TAG_FLASH_PART 0x4f81 -#define OMAP_TAG_VERSION_STR 0x4f82 - -struct omap_clock_config { - /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ - u8 system_clock_type; -}; - -struct omap_mmc_conf { - unsigned enabled:1; - /* nomux means "standard" muxing is wrong on this board, and that - * board-specific code handled it before common init logic. - */ - unsigned nomux:1; - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - /* 4 wire signaling is optional, and is only used for SD/SDIO */ - unsigned wire4:1; - s16 power_pin; - s16 switch_pin; - s16 wp_pin; -}; - -struct omap_mmc_config { - struct omap_mmc_conf mmc[2]; -}; - -struct omap_serial_console_config { - u8 console_uart; - u32 console_speed; -}; - -struct omap_sti_console_config { - unsigned enable:1; - u8 channel; -}; - -struct omap_camera_sensor_config { - u16 reset_gpio; - int (*power_on)(void * data); - int (*power_off)(void * data); -}; - -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; -}; - -struct omap_lcd_config { - char panel_name[16]; - char ctrl_name[16]; - s16 nreset_gpio; - u8 data_lines; -}; - -struct device; -struct fb_info; -struct omap_backlight_config { - int default_intensity; - int (*set_power)(struct device *dev, int state); - int (*check_fb)(struct fb_info *fb); -}; - -struct omap_fbmem_config { - u32 start; - u32 size; -}; - -struct omap_pwm_led_platform_data { - const char *name; - int intensity_timer; - int blink_timer; - void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); -}; - -/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - -struct omap_uart_config { - /* Bit field of UARTs present; bit 0 --> UART1 */ - unsigned int enabled_uarts; -}; - - -struct omap_flash_part_config { - char part_table[0]; -}; - -struct omap_boot_reason_config { - char reason_str[12]; -}; - -struct omap_version_config { - char component[12]; - char version[12]; -}; - - -#include <asm-arm/arch-omap/board-nokia.h> - -struct omap_board_config_entry { - u16 tag; - u16 len; - u8 data[0]; -}; - -struct omap_board_config_kernel { - u16 tag; - const void *data; -}; - -extern const void *__omap_get_config(u16 tag, size_t len, int nr); - -#define omap_get_config(tag, type) \ - ((const type *) __omap_get_config((tag), sizeof(type), 0)) -#define omap_get_nr_config(tag, type, nr) \ - ((const type *) __omap_get_config((tag), sizeof(type), (nr))) - -extern const void *omap_get_var_config(u16 tag, size_t *len); - -extern struct omap_board_config_kernel *omap_board_config; -extern int omap_board_config_size; - - -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); - -#endif |
