summaryrefslogtreecommitdiffstats
path: root/include/asm-arm/arch-omap/board.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-arm/arch-omap/board.h')
-rw-r--r--include/asm-arm/arch-omap/board.h186
1 files changed, 0 insertions, 186 deletions
diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
deleted file mode 100644
index 99564c70f128..000000000000
--- a/include/asm-arm/arch-omap/board.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * linux/include/asm-arm/arch-omap/board.h
- *
- * Information structures for board-specific data
- *
- * Copyright (C) 2004 Nokia Corporation
- * Written by Juha Yrjölä <juha.yrjola@nokia.com>
- */
-
-#ifndef _OMAP_BOARD_H
-#define _OMAP_BOARD_H
-
-#include <linux/types.h>
-
-#include <asm/arch/gpio-switch.h>
-
-/* Different peripheral ids */
-#define OMAP_TAG_CLOCK 0x4f01
-#define OMAP_TAG_MMC 0x4f02
-#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
-#define OMAP_TAG_USB 0x4f04
-#define OMAP_TAG_LCD 0x4f05
-#define OMAP_TAG_GPIO_SWITCH 0x4f06
-#define OMAP_TAG_UART 0x4f07
-#define OMAP_TAG_FBMEM 0x4f08
-#define OMAP_TAG_STI_CONSOLE 0x4f09
-#define OMAP_TAG_CAMERA_SENSOR 0x4f0a
-
-#define OMAP_TAG_BOOT_REASON 0x4f80
-#define OMAP_TAG_FLASH_PART 0x4f81
-#define OMAP_TAG_VERSION_STR 0x4f82
-
-struct omap_clock_config {
- /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
- u8 system_clock_type;
-};
-
-struct omap_mmc_conf {
- unsigned enabled:1;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* switch pin can be for card detect (default) or card cover */
- unsigned cover:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO */
- unsigned wire4:1;
- s16 power_pin;
- s16 switch_pin;
- s16 wp_pin;
-};
-
-struct omap_mmc_config {
- struct omap_mmc_conf mmc[2];
-};
-
-struct omap_serial_console_config {
- u8 console_uart;
- u32 console_speed;
-};
-
-struct omap_sti_console_config {
- unsigned enable:1;
- u8 channel;
-};
-
-struct omap_camera_sensor_config {
- u16 reset_gpio;
- int (*power_on)(void * data);
- int (*power_off)(void * data);
-};
-
-struct omap_usb_config {
- /* Configure drivers according to the connectors on your board:
- * - "A" connector (rectagular)
- * ... for host/OHCI use, set "register_host".
- * - "B" connector (squarish) or "Mini-B"
- * ... for device/gadget use, set "register_dev".
- * - "Mini-AB" connector (very similar to Mini-B)
- * ... for OTG use as device OR host, initialize "otg"
- */
- unsigned register_host:1;
- unsigned register_dev:1;
- u8 otg; /* port number, 1-based: usb1 == 2 */
-
- u8 hmc_mode;
-
- /* implicitly true if otg: host supports remote wakeup? */
- u8 rwc;
-
- /* signaling pins used to talk to transceiver on usbN:
- * 0 == usbN unused
- * 2 == usb0-only, using internal transceiver
- * 3 == 3 wire bidirectional
- * 4 == 4 wire bidirectional
- * 6 == 6 wire unidirectional (or TLL)
- */
- u8 pins[3];
-};
-
-struct omap_lcd_config {
- char panel_name[16];
- char ctrl_name[16];
- s16 nreset_gpio;
- u8 data_lines;
-};
-
-struct device;
-struct fb_info;
-struct omap_backlight_config {
- int default_intensity;
- int (*set_power)(struct device *dev, int state);
- int (*check_fb)(struct fb_info *fb);
-};
-
-struct omap_fbmem_config {
- u32 start;
- u32 size;
-};
-
-struct omap_pwm_led_platform_data {
- const char *name;
- int intensity_timer;
- int blink_timer;
- void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-};
-
-/* See include/asm-arm/arch-omap/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
- char name[12];
- u16 gpio;
- int flags:4;
- int type:4;
- int key_code:24; /* Linux key code */
-};
-
-struct omap_uart_config {
- /* Bit field of UARTs present; bit 0 --> UART1 */
- unsigned int enabled_uarts;
-};
-
-
-struct omap_flash_part_config {
- char part_table[0];
-};
-
-struct omap_boot_reason_config {
- char reason_str[12];
-};
-
-struct omap_version_config {
- char component[12];
- char version[12];
-};
-
-
-#include <asm/arch/board-nokia.h>
-
-struct omap_board_config_entry {
- u16 tag;
- u16 len;
- u8 data[0];
-};
-
-struct omap_board_config_kernel {
- u16 tag;
- const void *data;
-};
-
-extern const void *__omap_get_config(u16 tag, size_t len, int nr);
-
-#define omap_get_config(tag, type) \
- ((const type *) __omap_get_config((tag), sizeof(type), 0))
-#define omap_get_nr_config(tag, type, nr) \
- ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
-extern const void *omap_get_var_config(u16 tag, size_t *len);
-
-extern struct omap_board_config_kernel *omap_board_config;
-extern int omap_board_config_size;
-
-
-/* for TI reference platforms sharing the same debug card */
-extern int debug_card_init(u32 addr, unsigned gpio);
-
-#endif
OpenPOWER on IntegriCloud