diff options
Diffstat (limited to 'include/asm-arm/arch-lh7a40x/registers.h')
| -rw-r--r-- | include/asm-arm/arch-lh7a40x/registers.h | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/include/asm-arm/arch-lh7a40x/registers.h b/include/asm-arm/arch-lh7a40x/registers.h new file mode 100644 index 000000000000..2edb22e35450 --- /dev/null +++ b/include/asm-arm/arch-lh7a40x/registers.h @@ -0,0 +1,193 @@ +/* include/asm-arm/arch-lh7a40x/registers.h + * + * Copyright (C) 2004 Coastal Environmental Systems + * Copyright (C) 2004 Logic Product Development + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ + +#include <linux/config.h> +#include <asm/arch/constants.h> + +#ifndef __ASM_ARCH_REGISTERS_H +#define __ASM_ARCH_REGISTERS_H + + + /* Physical register base addresses */ + +#define AC97_PHYS (0x80000000) /* AC97 Controller */ +#define MMC_PHYS (0x80000100) /* Multimedia Card Controller */ +#define USB_PHYS (0x80000200) /* USB Client */ +#define SCI_PHYS (0x80000300) /* Secure Card Interface */ +#define CSC_PHYS (0x80000400) /* Clock/State Controller */ +#define INTC_PHYS (0x80000500) /* Interrupt Controller */ +#define UART1_PHYS (0x80000600) /* UART1 Controller */ +#define SIR_PHYS (0x80000600) /* IR Controller, same are UART1 */ +#define UART2_PHYS (0x80000700) /* UART2 Controller */ +#define UART3_PHYS (0x80000800) /* UART3 Controller */ +#define DCDC_PHYS (0x80000900) /* DC to DC Controller */ +#define ACI_PHYS (0x80000a00) /* Audio Codec Interface */ +#define SSP_PHYS (0x80000b00) /* Synchronous ... */ +#define TIMER_PHYS (0x80000c00) /* Timer Controller */ +#define RTC_PHYS (0x80000d00) /* Real-time Clock */ +#define GPIO_PHYS (0x80000e00) /* General Purpose IO */ +#define BMI_PHYS (0x80000f00) /* Battery Monitor Interface */ +#define WDT_PHYS (0x80001400) /* Watchdog Timer */ +#define SMC_PHYS (0x80002000) /* Static Memory Controller */ +#define SDRC_PHYS (0x80002400) /* SDRAM Controller */ +#define DMAC_PHYS (0x80002800) /* DMA Controller */ +#define CLCDC_PHYS (0x80003000) /* Color LCD Controller */ + + /* Physical registers of the LH7A404 */ + +#define VIC1_PHYS (0x80008000) /* Vectored Interrupt Controller 1 */ +#define USBH_PHYS (0x80009000) /* USB OHCI host controller */ +#define VIC2_PHYS (0x8000a000) /* Vectored Interrupt Controller 2 */ + +/*#define KBD_PHYS (0x80000e00) */ +/*#define LCDICP_PHYS (0x80001000) */ + + + /* Clock/State Controller register */ + +#define CSC_PWRCNT __REG(CSC_PHYS + 0x04) /* Power control */ + +#define CSC_PWRCNT_USBH_EN (1<<28) /* USB Host power enable */ + + + /* Interrupt Controller registers */ + +#define INTC_INTSR __REG(INTC_PHYS + 0x00) /* Status */ +#define INTC_INTRSR __REG(INTC_PHYS + 0x04) /* Raw Status */ +#define INTC_INTENS __REG(INTC_PHYS + 0x08) /* Enable Set */ +#define INTC_INTENC __REG(INTC_PHYS + 0x0c) /* Enable Clear */ + + + /* Vectored Interrupted Controller registers */ + +#define VIC1_IRQSTATUS __REG(VIC1_PHYS + 0x00) +#define VIC1_FIQSTATUS __REG(VIC1_PHYS + 0x04) +#define VIC1_RAWINTR __REG(VIC1_PHYS + 0x08) +#define VIC1_INTSEL __REG(VIC1_PHYS + 0x0c) +#define VIC1_INTEN __REG(VIC1_PHYS + 0x10) +#define VIC1_INTENCLR __REG(VIC1_PHYS + 0x14) +#define VIC1_SOFTINT __REG(VIC1_PHYS + 0x18) +#define VIC1_SOFTINTCLR __REG(VIC1_PHYS + 0x1c) +#define VIC1_PROTECT __REG(VIC1_PHYS + 0x20) +#define VIC1_VECTADDR __REG(VIC1_PHYS + 0x30) +#define VIC1_NVADDR __REG(VIC1_PHYS + 0x34) +#define VIC1_VAD0 __REG(VIC1_PHYS + 0x100) +#define VIC1_VECTCNTL0 __REG(VIC1_PHYS + 0x200) +#define VIC2_IRQSTATUS __REG(VIC2_PHYS + 0x00) +#define VIC2_FIQSTATUS __REG(VIC2_PHYS + 0x04) +#define VIC2_RAWINTR __REG(VIC2_PHYS + 0x08) +#define VIC2_INTSEL __REG(VIC2_PHYS + 0x0c) +#define VIC2_INTEN __REG(VIC2_PHYS + 0x10) +#define VIC2_INTENCLR __REG(VIC2_PHYS + 0x14) +#define VIC2_SOFTINT __REG(VIC2_PHYS + 0x18) +#define VIC2_SOFTINTCLR __REG(VIC2_PHYS + 0x1c) +#define VIC2_PROTECT __REG(VIC2_PHYS + 0x20) +#define VIC2_VECTADDR __REG(VIC2_PHYS + 0x30) +#define VIC2_NVADDR __REG(VIC2_PHYS + 0x34) +#define VIC2_VAD0 __REG(VIC2_PHYS + 0x100) +#define VIC2_VECTCNTL0 __REG(VIC2_PHYS + 0x200) + +#define VIC_CNTL_ENABLE (0x20) + + /* USB Host registers (Open HCI compatible) */ + +#define USBH_CMDSTATUS __REG(USBH_PHYS + 0x08) + + + /* GPIO registers */ + +#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* Interrupt Type 1 (Edge) */ +#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* Interrupt Type 2 */ +#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIO End-of-Interrupt */ +#define GPIO_GPIOINTEN __REG(GPIO_PHYS + 0x58) /* GPIO Interrupt Enable */ +#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIO Interrupt Status */ + + + /* Static Memory Controller registers */ + +#define SMC_BCR0 __REG(SMC_PHYS + 0x00) /* Bank 0 Configuration */ +#define SMC_BCR1 __REG(SMC_PHYS + 0x04) /* Bank 1 Configuration */ +#define SMC_BCR2 __REG(SMC_PHYS + 0x08) /* Bank 2 Configuration */ +#define SMC_BCR3 __REG(SMC_PHYS + 0x0C) /* Bank 3 Configuration */ +#define SMC_BCR6 __REG(SMC_PHYS + 0x18) /* Bank 6 Configuration */ +#define SMC_BCR7 __REG(SMC_PHYS + 0x1c) /* Bank 7 Configuration */ + + +#ifdef CONFIG_MACH_KEV7A400 +# define CPLD_RD_OPT_DIP_SW __REG16(CPLD_PHYS + 0x00) /* Read Option SW */ +# define CPLD_WR_IO_BRD_CTL __REG16(CPLD_PHYS + 0x00) /* Write Control */ +# define CPLD_RD_PB_KEYS __REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */ +# define CPLD_LATCHED_INTS __REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */ +# define CPLD_CL_INT __REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */ +# define CPLD_BOOT_MMC_STATUS __REG16(CPLD_PHYS + 0x06) /* R/O */ +# define CPLD_RD_KPD_ROW_SENSE __REG16(CPLD_PHYS + 0x08) +# define CPLD_WR_PB_INT_MASK __REG16(CPLD_PHYS + 0x08) +# define CPLD_RD_BRD_DISP_SW __REG16(CPLD_PHYS + 0x0a) +# define CPLD_WR_EXT_INT_MASK __REG16(CPLD_PHYS + 0x0a) +# define CPLD_LCD_PWR_CNTL __REG16(CPLD_PHYS + 0x0c) +# define CPLD_SEVEN_SEG __REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */ + +#endif + +#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404) +# define CPLD_CONTROL __REG8(CPLD02_PHYS) +# define CPLD_SPI_DATA __REG8(CPLD06_PHYS) +# define CPLD_SPI_CONTROL __REG8(CPLD08_PHYS) +# define CPLD_SPI_EEPROM __REG8(CPLD0A_PHYS) +# define CPLD_INTERRUPTS __REG8(CPLD0C_PHYS) /* IRQ mask/status */ +# define CPLD_BOOT_MODE __REG8(CPLD0E_PHYS) +# define CPLD_FLASH __REG8(CPLD10_PHYS) +# define CPLD_POWER_MGMT __REG8(CPLD12_PHYS) +# define CPLD_REVISION __REG8(CPLD14_PHYS) +# define CPLD_GPIO_EXT __REG8(CPLD16_PHYS) +# define CPLD_GPIO_DATA __REG8(CPLD18_PHYS) +# define CPLD_GPIO_DIR __REG8(CPLD1A_PHYS) +#endif + + + /* Timer registers */ + +#define TIMER_LOAD1 __REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */ +#define TIMER_VALUE1 __REG(TIMER_PHYS + 0x04) /* Timer 1 current value */ +#define TIMER_CONTROL1 __REG(TIMER_PHYS + 0x08) /* Timer 1 control word */ +#define TIMER_EOI1 __REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */ + +#define TIMER_LOAD2 __REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */ +#define TIMER_VALUE2 __REG(TIMER_PHYS + 0x24) /* Timer 2 current value */ +#define TIMER_CONTROL2 __REG(TIMER_PHYS + 0x28) /* Timer 2 control word */ +#define TIMER_EOI2 __REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */ + +#define TIMER_BUZZCON __REG(TIMER_PHYS + 0x40) /* Buzzer configuration */ + +#define TIMER_LOAD3 __REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */ +#define TIMER_VALUE3 __REG(TIMER_PHYS + 0x84) /* Timer 3 current value */ +#define TIMER_CONTROL3 __REG(TIMER_PHYS + 0x88) /* Timer 3 control word */ +#define TIMER_EOI3 __REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */ + +#define TIMER_C_ENABLE (1<<7) +#define TIMER_C_PERIODIC (1<<6) +#define TIMER_C_FREERUNNING (0) +#define TIMER_C_2KHZ (0x00) /* 1.986 kHz */ +#define TIMER_C_508KHZ (0x08) + + /* GPIO registers */ + +#define GPIO_PFDD __REG(GPIO_PHYS + 0x34) /* PF direction */ +#define GPIO_INTTYPE1 __REG(GPIO_PHYS + 0x4c) /* IRQ edge or lvl */ +#define GPIO_INTTYPE2 __REG(GPIO_PHYS + 0x50) /* IRQ activ hi/lo */ +#define GPIO_GPIOFEOI __REG(GPIO_PHYS + 0x54) /* GPIOF end of IRQ */ +#define GPIO_GPIOFINTEN __REG(GPIO_PHYS + 0x58) /* GPIOF IRQ enable */ +#define GPIO_INTSTATUS __REG(GPIO_PHYS + 0x5c) /* GPIOF IRQ latch */ +#define GPIO_RAWINTSTATUS __REG(GPIO_PHYS + 0x60) /* GPIOF IRQ raw */ + + +#endif /* _ASM_ARCH_REGISTERS_H */ + |
