summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/osl.c34
-rw-r--r--drivers/ata/libata-core.c2
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/pata_artop.c2
-rw-r--r--drivers/ata/pata_hpt37x.c19
-rw-r--r--drivers/block/aoe/aoeblk.c1
-rw-r--r--drivers/block/cciss.c6
-rw-r--r--drivers/block/cpqarray.c15
-rw-r--r--drivers/char/ftape/zftape/zftape-buffers.c4
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c2
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c2
-rw-r--r--drivers/char/isicom.c3
-rw-r--r--drivers/firmware/dell_rbu.c9
-rw-r--r--drivers/i2c/busses/i2c-ixp4xx.c3
-rw-r--r--drivers/i2c/busses/scx200_acb.c7
-rw-r--r--drivers/ide/legacy/hd.c2
-rw-r--r--drivers/infiniband/hw/ipath/Kconfig2
-rw-r--r--drivers/infiniband/hw/ipath/Makefile5
-rw-r--r--drivers/infiniband/hw/ipath/ipath_driver.c4
-rw-r--r--drivers/input/keyboard/lkkbd.c5
-rw-r--r--drivers/isdn/hisax/Kconfig2
-rw-r--r--drivers/macintosh/windfarm_pm112.c11
-rw-r--r--drivers/macintosh/windfarm_pm81.c1
-rw-r--r--drivers/macintosh/windfarm_pm91.c1
-rw-r--r--drivers/mmc/mmc.c19
-rw-r--r--drivers/net/tg3.c25
-rw-r--r--drivers/parport/parport_ip32.c2
-rw-r--r--drivers/pci/quirks.c27
-rw-r--r--drivers/pcmcia/ds.c3
-rw-r--r--drivers/scsi/3w-9xxx.c141
-rw-r--r--drivers/scsi/3w-9xxx.h14
-rw-r--r--drivers/scsi/aic94xx/aic94xx_hwi.c18
-rw-r--r--drivers/scsi/aic94xx/aic94xx_hwi.h12
-rw-r--r--drivers/scsi/aic94xx/aic94xx_init.c2
-rw-r--r--drivers/scsi/aic94xx/aic94xx_sas.h1
-rw-r--r--drivers/scsi/aic94xx/aic94xx_scb.c72
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.c5
-rw-r--r--drivers/scsi/aic94xx/aic94xx_seq.h2
-rw-r--r--drivers/scsi/gdth.c4
-rw-r--r--drivers/scsi/iscsi_tcp.c22
-rw-r--r--drivers/scsi/libiscsi.c9
-rw-r--r--drivers/scsi/libsas/sas_expander.c84
-rw-r--r--drivers/scsi/psi240i.c2
-rw-r--r--drivers/scsi/scsi_lib.c1
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c2
-rw-r--r--drivers/scsi/sg.c25
-rw-r--r--drivers/usb/core/message.c5
-rw-r--r--drivers/usb/host/ohci-hcd.c25
-rw-r--r--drivers/usb/host/ohci-hub.c6
-rw-r--r--drivers/usb/input/hid-core.c5
-rw-r--r--drivers/usb/input/hid-input.c17
-rw-r--r--drivers/usb/input/hid.h1
-rw-r--r--drivers/usb/misc/auerswald.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.h11
-rw-r--r--drivers/usb/serial/ipaq.c1
-rw-r--r--drivers/usb/storage/unusual_devs.h18
-rw-r--r--drivers/video/aty/atyfb_base.c2
-rw-r--r--drivers/video/aty/radeon_i2c.c8
-rw-r--r--drivers/video/fb_ddc.c6
-rw-r--r--drivers/video/nvidia/nv_setup.c2
-rw-r--r--drivers/video/pnx4008/pnxrgbfb.c5
-rw-r--r--drivers/video/pnx4008/sdum.c2
-rw-r--r--drivers/w1/masters/matrox_w1.c2
64 files changed, 492 insertions, 264 deletions
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index c84286cbbe25..068fe4f100b0 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -73,7 +73,6 @@ static unsigned int acpi_irq_irq;
static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
-static struct workqueue_struct *kacpi_notify_wq;
acpi_status acpi_os_initialize(void)
{
@@ -92,9 +91,8 @@ acpi_status acpi_os_initialize1(void)
return AE_NULL_ENTRY;
}
kacpid_wq = create_singlethread_workqueue("kacpid");
- kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
BUG_ON(!kacpid_wq);
- BUG_ON(!kacpi_notify_wq);
+
return AE_OK;
}
@@ -106,7 +104,6 @@ acpi_status acpi_os_terminate(void)
}
destroy_workqueue(kacpid_wq);
- destroy_workqueue(kacpi_notify_wq);
return AE_OK;
}
@@ -569,7 +566,10 @@ void acpi_os_derive_pci_id(acpi_handle rhandle, /* upper bound */
static void acpi_os_execute_deferred(void *context)
{
- struct acpi_os_dpc *dpc = (struct acpi_os_dpc *)context;
+ struct acpi_os_dpc *dpc = NULL;
+
+
+ dpc = (struct acpi_os_dpc *)context;
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
return;
@@ -604,12 +604,14 @@ acpi_status acpi_os_execute(acpi_execute_type type,
struct acpi_os_dpc *dpc;
struct work_struct *task;
+ ACPI_FUNCTION_TRACE("os_queue_for_execution");
+
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
function, context));
if (!function)
- return AE_BAD_PARAMETER;
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
/*
* Allocate/initialize DPC structure. Note that this memory will be
@@ -622,20 +624,26 @@ acpi_status acpi_os_execute(acpi_execute_type type,
* from the same memory.
*/
- dpc = kmalloc(sizeof(struct acpi_os_dpc) +
- sizeof(struct work_struct), GFP_ATOMIC);
+ dpc =
+ kmalloc(sizeof(struct acpi_os_dpc) + sizeof(struct work_struct),
+ GFP_ATOMIC);
if (!dpc)
- return AE_NO_MEMORY;
+ return_ACPI_STATUS(AE_NO_MEMORY);
+
dpc->function = function;
dpc->context = context;
+
task = (void *)(dpc + 1);
INIT_WORK(task, acpi_os_execute_deferred, (void *)dpc);
- if (!queue_work((type == OSL_NOTIFY_HANDLER)?
- kacpi_notify_wq : kacpid_wq, task)) {
- status = AE_ERROR;
+
+ if (!queue_work(kacpid_wq, task)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
+ "Call to queue_work() failed.\n"));
kfree(dpc);
+ status = AE_ERROR;
}
- return status;
+
+ return_ACPI_STATUS(status);
}
EXPORT_SYMBOL(acpi_os_execute);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a8fd0c3e59b3..915a55a6cc14 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5957,7 +5957,7 @@ static void __exit ata_exit(void)
destroy_workqueue(ata_aux_wq);
}
-module_init(ata_init);
+subsys_initcall(ata_init);
module_exit(ata_exit);
static unsigned long ratelimit_time;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 7af2a4ba4990..5c1fc467fc7f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1612,9 +1612,9 @@ early_finish:
err_did:
ata_qc_free(qc);
-err_mem:
cmd->result = (DID_ERROR << 16);
done(cmd);
+err_mem:
DPRINTK("EXIT - internal\n");
return 0;
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 690828eb5226..96a098020a8f 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -92,7 +92,7 @@ static int artop6260_pre_reset(struct ata_port *ap)
return -ENOENT;
pci_read_config_byte(pdev, 0x49, &tmp);
- if (tmp & (1 >> ap->port_no))
+ if (tmp & (1 << ap->port_no))
ap->cbl = ATA_CBL_PATA40;
else
ap->cbl = ATA_CBL_PATA80;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 7350443948c1..fce3fcdc7e79 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.5"
+#define DRV_VERSION "0.5.1"
struct hpt_clock {
u8 xfer_speed;
@@ -453,7 +453,13 @@ static int hpt37x_pre_reset(struct ata_port *ap)
{
u8 scr2, ata66;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
+ static const struct pci_bits hpt37x_enable_bits[] = {
+ { 0x50, 1, 0x04, 0x04 },
+ { 0x54, 1, 0x04, 0x04 }
+ };
+ if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+ return -ENOENT;
+
pci_read_config_byte(pdev, 0x5B, &scr2);
pci_write_config_byte(pdev, 0x5B, scr2 & ~0x01);
/* Cable register now active */
@@ -488,10 +494,17 @@ static void hpt37x_error_handler(struct ata_port *ap)
static int hpt374_pre_reset(struct ata_port *ap)
{
+ static const struct pci_bits hpt37x_enable_bits[] = {
+ { 0x50, 1, 0x04, 0x04 },
+ { 0x54, 1, 0x04, 0x04 }
+ };
u16 mcr3, mcr6;
u8 ata66;
-
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no]))
+ return -ENOENT;
+
/* Do the extra channel work */
pci_read_config_word(pdev, 0x52, &mcr3);
pci_read_config_word(pdev, 0x56, &mcr6);
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index d433f27e0ce2..aa25f8b09fe3 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -68,6 +68,7 @@ static struct attribute *aoe_attrs[] = {
&disk_attr_mac.attr,
&disk_attr_netif.attr,
&disk_attr_fwver.attr,
+ NULL
};
static const struct attribute_group attr_group = {
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 6ffe2b2bdacc..4105c3bf3476 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1300,6 +1300,12 @@ static void cciss_softirq_done(struct request *rq)
complete_buffers(rq->bio, rq->errors);
+ if (blk_fs_request(rq)) {
+ const int rw = rq_data_dir(rq);
+
+ disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
+ }
+
#ifdef CCISS_DEBUG
printk("Done with %p\n", rq);
#endif /* CCISS_DEBUG */
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index 570d2f049323..d5f519ebbc08 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -998,6 +998,7 @@ static inline void complete_buffers(struct bio *bio, int ok)
*/
static inline void complete_command(cmdlist_t *cmd, int timeout)
{
+ struct request *rq = cmd->rq;
int ok=1;
int i, ddir;
@@ -1029,12 +1030,18 @@ static inline void complete_command(cmdlist_t *cmd, int timeout)
pci_unmap_page(hba[cmd->ctlr]->pci_dev, cmd->req.sg[i].addr,
cmd->req.sg[i].size, ddir);
- complete_buffers(cmd->rq->bio, ok);
+ complete_buffers(rq->bio, ok);
- add_disk_randomness(cmd->rq->rq_disk);
+ if (blk_fs_request(rq)) {
+ const int rw = rq_data_dir(rq);
- DBGPX(printk("Done with %p\n", cmd->rq););
- end_that_request_last(cmd->rq, ok ? 1 : -EIO);
+ disk_stat_add(rq->rq_disk, sectors[rw], rq->nr_sectors);
+ }
+
+ add_disk_randomness(rq->rq_disk);
+
+ DBGPX(printk("Done with %p\n", rq););
+ end_that_request_last(rq, ok ? 1 : -EIO);
}
/*
diff --git a/drivers/char/ftape/zftape/zftape-buffers.c b/drivers/char/ftape/zftape/zftape-buffers.c
index da06f138334e..7ebce2ec7897 100644
--- a/drivers/char/ftape/zftape/zftape-buffers.c
+++ b/drivers/char/ftape/zftape/zftape-buffers.c
@@ -85,7 +85,7 @@ int zft_vmalloc_once(void *new, size_t size)
peak_memory = used_memory;
}
TRACE_ABORT(0, ft_t_noise,
- "allocated buffer @ %p, %d bytes", *(void **)new, size);
+ "allocated buffer @ %p, %zd bytes", *(void **)new, size);
}
int zft_vmalloc_always(void *new, size_t size)
{
@@ -101,7 +101,7 @@ void zft_vfree(void *old, size_t size)
if (*(void **)old) {
vfree(*(void **)old);
used_memory -= size;
- TRACE(ft_t_noise, "released buffer @ %p, %d bytes",
+ TRACE(ft_t_noise, "released buffer @ %p, %zd bytes",
*(void **)old, size);
*(void **)old = NULL;
}
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index a41b8df24073..c47add8e47df 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2118,7 +2118,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf)
dev_set_drvdata(&bmc->dev->dev, bmc);
kref_init(&bmc->refcount);
- rv = platform_device_register(bmc->dev);
+ rv = platform_device_add(bmc->dev);
mutex_unlock(&ipmidriver_mutex);
if (rv) {
printk(KERN_ERR
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index abc5149e30e8..bb1fac104fda 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2346,7 +2346,7 @@ static int try_smi_init(struct smi_info *new_smi)
new_smi->dev = &new_smi->pdev->dev;
new_smi->dev->driver = &ipmi_driver;
- rv = platform_device_register(new_smi->pdev);
+ rv = platform_device_add(new_smi->pdev);
if (rv) {
printk(KERN_ERR
"ipmi_si_intf:"
diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c
index e9e9bf31c369..58c955e390b3 100644
--- a/drivers/char/isicom.c
+++ b/drivers/char/isicom.c
@@ -1062,11 +1062,12 @@ static void isicom_shutdown_port(struct isi_port *port)
static void isicom_close(struct tty_struct *tty, struct file *filp)
{
struct isi_port *port = tty->driver_data;
- struct isi_board *card = port->card;
+ struct isi_board *card;
unsigned long flags;
if (!port)
return;
+ card = port->card;
if (isicom_paranoia_check(port, tty->name, "isicom_close"))
return;
diff --git a/drivers/firmware/dell_rbu.c b/drivers/firmware/dell_rbu.c
index 08b161798443..fc702e40bd43 100644
--- a/drivers/firmware/dell_rbu.c
+++ b/drivers/firmware/dell_rbu.c
@@ -705,17 +705,16 @@ static struct bin_attribute rbu_packet_size_attr = {
static int __init dcdrbu_init(void)
{
- int rc = 0;
+ int rc;
spin_lock_init(&rbu_data.lock);
init_packet_head();
- rbu_device =
- platform_device_register_simple("dell_rbu", -1, NULL, 0);
- if (!rbu_device) {
+ rbu_device = platform_device_register_simple("dell_rbu", -1, NULL, 0);
+ if (IS_ERR(rbu_device)) {
printk(KERN_ERR
"dell_rbu:%s:platform_device_register_simple "
"failed\n", __FUNCTION__);
- return -EIO;
+ return PTR_ERR(rbu_device);
}
rc = sysfs_create_bin_file(&rbu_device->dev.kobj, &rbu_data_attr);
diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c
index 1ce01fb0ac09..05fffb9415a2 100644
--- a/drivers/i2c/busses/i2c-ixp4xx.c
+++ b/drivers/i2c/busses/i2c-ixp4xx.c
@@ -137,7 +137,8 @@ static int ixp4xx_i2c_probe(struct platform_device *plat_dev)
gpio_line_set(gpio->scl_pin, 0);
gpio_line_set(gpio->sda_pin, 0);
- if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) {
+ err = i2c_bit_add_bus(&drv_data->adapter);
+ if (err != 0)
printk(KERN_ERR "ERROR: Could not install %s\n", plat_dev->dev.bus_id);
kfree(drv_data);
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 32aab0d34ee9..714bae780953 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -494,11 +494,12 @@ static __init int scx200_create_pci(const char *text, struct pci_dev *pdev,
iface->pdev = pdev;
iface->bar = bar;
- pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+ rc = pci_enable_device_bars(iface->pdev, 1 << iface->bar);
+ if (rc)
+ goto errout_free;
rc = pci_request_region(iface->pdev, iface->bar, iface->adapter.name);
-
- if (rc != 0) {
+ if (rc) {
printk(KERN_ERR NAME ": can't allocate PCI BAR %d\n",
iface->bar);
goto errout_free;
diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c
index b1d5291531b7..45ed03591cd8 100644
--- a/drivers/ide/legacy/hd.c
+++ b/drivers/ide/legacy/hd.c
@@ -459,7 +459,7 @@ ok_to_read:
#ifdef DEBUG
printk("%s: read: sector %ld, remaining = %ld, buffer=%p\n",
req->rq_disk->disk_name, req->sector, req->nr_sectors,
- req->buffer+512));
+ req->buffer+512);
#endif
if (req->current_nr_sectors <= 0)
end_request(req, 1);
diff --git a/drivers/infiniband/hw/ipath/Kconfig b/drivers/infiniband/hw/ipath/Kconfig
index 574a678e7fdd..5ca471ac6542 100644
--- a/drivers/infiniband/hw/ipath/Kconfig
+++ b/drivers/infiniband/hw/ipath/Kconfig
@@ -1,6 +1,6 @@
config INFINIBAND_IPATH
tristate "QLogic InfiniPath Driver"
- depends on PCI_MSI && 64BIT && INFINIBAND
+ depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND
---help---
This is a driver for QLogic InfiniPath host channel adapters,
including InfiniBand verbs support. This driver allows these
diff --git a/drivers/infiniband/hw/ipath/Makefile b/drivers/infiniband/hw/ipath/Makefile
index 5e29cb0095e5..7dc10551cf18 100644
--- a/drivers/infiniband/hw/ipath/Makefile
+++ b/drivers/infiniband/hw/ipath/Makefile
@@ -10,8 +10,6 @@ ib_ipath-y := \
ipath_eeprom.o \
ipath_file_ops.o \
ipath_fs.o \
- ipath_iba6110.o \
- ipath_iba6120.o \
ipath_init_chip.o \
ipath_intr.o \
ipath_keys.o \
@@ -31,5 +29,8 @@ ib_ipath-y := \
ipath_verbs_mcast.o \
ipath_verbs.o
+ib_ipath-$(CONFIG_HT_IRQ) += ipath_iba6110.o
+ib_ipath-$(CONFIG_PCI_MSI) += ipath_iba6120.o
+
ib_ipath-$(CONFIG_X86_64) += ipath_wc_x86_64.o
ib_ipath-$(CONFIG_PPC64) += ipath_wc_ppc64.o
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 09a13c1fc46a..1aeddb48e355 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -390,12 +390,16 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
/* setup the chip-specific functions, as early as possible. */
switch (ent->device) {
+#ifdef CONFIG_HT_IRQ
case PCI_DEVICE_ID_INFINIPATH_HT:
ipath_init_iba6110_funcs(dd);
break;
+#endif
+#ifdef CONFIG_PCI_MSI
case PCI_DEVICE_ID_INFINIPATH_PE800:
ipath_init_iba6120_funcs(dd);
break;
+#endif
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index 708d5a1bc3d2..979b93e33da7 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -59,11 +59,6 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Should you need to contact me, the author, you can do so either by
- * email or by paper mail:
- * Jan-Benedict Glaw, Lilienstraße 16, 33790 Hörste (near Halle/Westf.),
- * Germany.
*/
#include <linux/delay.h>
diff --git a/drivers/isdn/hisax/Kconfig b/drivers/isdn/hisax/Kconfig
index eb57a988e048..cfd2718a490d 100644
--- a/drivers/isdn/hisax/Kconfig
+++ b/drivers/isdn/hisax/Kconfig
@@ -344,7 +344,7 @@ config HISAX_HFC_SX
config HISAX_ENTERNOW_PCI
bool "Formula-n enter:now PCI card"
- depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
+ depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || FRV))
help
This enables HiSax support for the Formula-n enter:now PCI
ISDN card.
diff --git a/drivers/macintosh/windfarm_pm112.c b/drivers/macintosh/windfarm_pm112.c
index fa4b13f89369..b3fbb45bc90a 100644
--- a/drivers/macintosh/windfarm_pm112.c
+++ b/drivers/macintosh/windfarm_pm112.c
@@ -685,6 +685,17 @@ static int __init wf_pm112_init(void)
++nr_cores;
printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n");
+
+#ifdef MODULE
+ request_module("windfarm_smu_controls");
+ request_module("windfarm_smu_sensors");
+ request_module("windfarm_smu_sat");
+ request_module("windfarm_lm75_sensor");
+ request_module("windfarm_max6690_sensor");
+ request_module("windfarm_cpufreq_clamp");
+
+#endif /* MODULE */
+
platform_driver_register(&wf_pm112_driver);
return 0;
}
diff --git a/drivers/macintosh/windfarm_pm81.c b/drivers/macintosh/windfarm_pm81.c
index 2a944851b8e1..f24fa734046a 100644
--- a/drivers/macintosh/windfarm_pm81.c
+++ b/drivers/macintosh/windfarm_pm81.c
@@ -788,6 +788,7 @@ static int __init wf_smu_init(void)
request_module("windfarm_smu_controls");
request_module("windfarm_smu_sensors");
request_module("windfarm_lm75_sensor");
+ request_module("windfarm_cpufreq_clamp");
#endif /* MODULE */
platform_driver_register(&wf_smu_driver);
diff --git a/drivers/macintosh/windfarm_pm91.c b/drivers/macintosh/windfarm_pm91.c
index 9961a67b4f85..26eee69ebe6d 100644
--- a/drivers/macintosh/windfarm_pm91.c
+++ b/drivers/macintosh/windfarm_pm91.c
@@ -719,6 +719,7 @@ static int __init wf_smu_init(void)
request_module("windfarm_smu_controls");
request_module("windfarm_smu_sensors");
request_module("windfarm_lm75_sensor");
+ request_module("windfarm_cpufreq_clamp");
#endif /* MODULE */
platform_driver_register(&wf_smu_driver);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index ee8863c123e3..766bc54406e5 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -475,7 +475,7 @@ static u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
if (bit) {
bit -= 1;
- ocr = 3 << bit;
+ ocr &= 3 << bit;
host->ios.vdd = bit;
mmc_set_ios(host);
@@ -1178,14 +1178,29 @@ static void mmc_rescan(void *data)
{
struct mmc_host *host = data;
struct list_head *l, *n;
+ unsigned char power_mode;
mmc_claim_host(host);
- if (host->ios.power_mode == MMC_POWER_ON)
+ /*
+ * Check for removed cards and newly inserted ones. We check for
+ * removed cards first so we can intelligently re-select the VDD.
+ */
+ power_mode = host->ios.power_mode;
+ if (power_mode == MMC_POWER_ON)
mmc_check_cards(host);
mmc_setup(host);
+ /*
+ * Some broken cards process CMD1 even in stand-by state. There is
+ * no reply, but an ILLEGAL_COMMAND error is cached and returned
+ * after next command. We poll for card status here to clear any
+ * possibly pending error.
+ */
+ if (power_mode == MMC_POWER_ON)
+ mmc_check_cards(host);
+
if (!list_empty(&host->cards)) {
/*
* (Re-)calculate the fastest clock rate which the
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 06e4f77b0988..1dbdd6bb587b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.68"
-#define DRV_MODULE_RELDATE "November 02, 2006"
+#define DRV_MODULE_VERSION "3.69"
+#define DRV_MODULE_RELDATE "November 15, 2006"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -4728,10 +4728,11 @@ static int tg3_poll_fw(struct tg3 *tp)
u32 val;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- for (i = 0; i < 400; i++) {
+ /* Wait up to 20ms for init done. */
+ for (i = 0; i < 200; i++) {
if (tr32(VCPU_STATUS) & VCPU_STATUS_INIT_DONE)
return 0;
- udelay(10);
+ udelay(100);
}
return -ENODEV;
}
@@ -10365,7 +10366,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
u32 pci_state_reg, grc_misc_cfg;
u32 val;
u16 pci_cmd;
- int err;
+ int err, pcie_cap;
/* Force memory write invalidate off. If we leave it on,
* then on 5700_BX chips we have to enable a workaround.
@@ -10540,8 +10541,19 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5906)
tp->tg3_flags2 |= TG3_FLG2_JUMBO_CAPABLE;
- if (pci_find_capability(tp->pdev, PCI_CAP_ID_EXP) != 0)
+ pcie_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap != 0) {
tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u16 lnkctl;
+
+ pci_read_config_word(tp->pdev,
+ pcie_cap + PCI_EXP_LNKCTL,
+ &lnkctl);
+ if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN)
+ tp->tg3_flags2 &= ~TG3_FLG2_HW_TSO_2;
+ }
+ }
/* If we have an AMD 762 or VIA K8T800 chipset, write
* reordering to the mailbox registers done by the host
@@ -11808,6 +11820,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701 ||
tp->pci_chip_rev_id == CHIPREV_ID_5705_A0 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906 ||
(tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0) {
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else {
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
index e3e19277030a..ec44efdbb84e 100644
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@@ -780,7 +780,7 @@ static irqreturn_t parport_ip32_interrupt(int irq, void *dev_id)
enum parport_ip32_irq_mode irq_mode = priv->irq_mode;
switch (irq_mode) {
case PARPORT_IP32_IRQ_FWD:
- parport_generic_irq(irq, p, regs);
+ parport_generic_irq(irq, p);
break;
case PARPORT_IP32_IRQ_HERE:
parport_ip32_wakeup(p);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 204b1c8e972b..5b4483811691 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1460,33 +1460,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
-/*
- * Fixup the cardbus bridges on the IBM Dock II docking station
- */
-static void __devinit quirk_ibm_dock2_cardbus(struct pci_dev *dev)
-{
- u32 val;
-
- /*
- * tie the 2 interrupt pins to INTA, and configure the
- * multifunction routing register to handle this.
- */
- if ((dev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
- (dev->subsystem_device == 0x0148)) {
- printk(KERN_INFO "PCI: Found IBM Dock II Cardbus Bridge "
- "applying quirk\n");
- pci_read_config_dword(dev, 0x8c, &val);
- val = ((val & 0xffffff00) | 0x1002);
- pci_write_config_dword(dev, 0x8c, val);
- pci_read_config_dword(dev, 0x80, &val);
- val = ((val & 0x00ffff00) | 0x2864c077);
- pci_write_config_dword(dev, 0x80, val);
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420,
- quirk_ibm_dock2_cardbus);
-
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 0f701921c13e..a20d84d707d9 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -1271,6 +1271,9 @@ static void pcmcia_bus_remove_socket(struct class_device *class_dev,
socket->pcmcia_state.dead = 1;
pccard_register_pcmcia(socket, NULL);
+ /* unregister any unbound devices */
+ pcmcia_card_remove(socket, NULL);
+
pcmcia_put_socket(socket);
return;
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 5f8c26cd66ca..b091a0fc4eb0 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -66,6 +66,9 @@
2.26.02.006 - Fix 9550SX pchip reset timeout.
Add big endian support.
2.26.02.007 - Disable local interrupts during kmap/unmap_atomic().
+ 2.26.02.008 - Free irq handler in __twa_shutdown().
+ Serialize reset code.
+ Add support for 9650SE controllers.
*/
#include <linux/module.h>
@@ -89,7 +92,7 @@
#include "3w-9xxx.h"
/* Globals */
-#define TW_DRIVER_VERSION "2.26.02.007"
+#define TW_DRIVER_VERSION "2.26.02.008"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@@ -566,9 +569,9 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
goto out;
}
- tw_dev->working_srl = fw_on_ctlr_srl;
- tw_dev->working_branch = fw_on_ctlr_branch;
- tw_dev->working_build = fw_on_ctlr_build;
+ tw_dev->tw_compat_info.working_srl = fw_on_ctlr_srl;
+ tw_dev->tw_compat_info.working_branch = fw_on_ctlr_branch;
+ tw_dev->tw_compat_info.working_build = fw_on_ctlr_build;
/* Try base mode compatibility */
if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
@@ -590,10 +593,23 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
}
goto out;
}
- tw_dev->working_srl = TW_BASE_FW_SRL;
- tw_dev->working_branch = TW_BASE_FW_BRANCH;
- tw_dev->working_build = TW_BASE_FW_BUILD;
- }
+ tw_dev->tw_compat_info.working_srl = TW_BASE_FW_SRL;
+ tw_dev->tw_compat_info.working_branch = TW_BASE_FW_BRANCH;
+ tw_dev->tw_compat_info.working_build = TW_BASE_FW_BUILD;
+ }
+
+ /* Load rest of compatibility struct */
+ strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
+ tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
+ tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
+ tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
+ tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
+ tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
+ tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
+ tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
+ tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
+ tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
+
retval = 0;
out:
return retval;
@@ -631,7 +647,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
goto out2;
/* Check data buffer size */
- if (driver_command.buffer_length > TW_MAX_SECTORS * 512) {
+ if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
retval = TW_IOCTL_ERROR_OS_EINVAL;
goto out2;
}
@@ -680,13 +696,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
/* Now wait for command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
- /* See if we reset while waiting for the ioctl to complete */
- if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- retval = TW_IOCTL_ERROR_OS_ERESTARTSYS;
- goto out3;
- }
-
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
@@ -694,11 +703,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
tw_dev->host->host_no, TW_DRIVER, 0xc,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
- spin_lock_irqsave(tw_dev->host->host_lock, flags);
- tw_dev->state[request_id] = TW_S_COMPLETED;
- twa_free_request_id(tw_dev, request_id);
- tw_dev->posted_request_count--;
- spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
twa_reset_device_extension(tw_dev, 1);
goto out3;
}
@@ -717,16 +721,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
tw_ioctl->driver_command.status = 0;
/* Copy compatiblity struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
- strncpy(tw_compat_info->driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
- tw_compat_info->working_srl = tw_dev->working_srl;
- tw_compat_info->working_branch = tw_dev->working_branch;
- tw_compat_info->working_build = tw_dev->working_build;
- tw_compat_info->driver_srl_high = TW_CURRENT_DRIVER_SRL;
- tw_compat_info->driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
- tw_compat_info->driver_build_high = TW_CURRENT_DRIVER_BUILD;
- tw_compat_info->driver_srl_low = TW_BASE_FW_SRL;
- tw_compat_info->driver_branch_low = TW_BASE_FW_BRANCH;
- tw_compat_info->driver_build_low = TW_BASE_FW_BUILD;
+ memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
case TW_IOCTL_GET_LAST_EVENT:
if (tw_dev->event_queue_wrapped) {
@@ -895,7 +890,8 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value)
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
- TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
+ if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) || (!test_bit(TW_IN_RESET, &tw_dev->flags)))
+ TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
@@ -939,10 +935,12 @@ static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev)
unsigned long before;
int retval = 1;
- if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) {
+ if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
+ (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
+ msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
@@ -1214,6 +1212,10 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance)
handled = 1;
+ /* If we are resetting, bail */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags))
+ goto twa_interrupt_bail;
+
/* Check controller for errors */
if (twa_check_bits(status_reg_value)) {
if (twa_decode_bits(tw_dev, status_reg_value)) {
@@ -1355,8 +1357,8 @@ static void twa_load_sgl(TW_Command_Full *full_command_packet, int request_id, d
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
- newcommand->request_id__lunl =
- TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id);
+ newcommand->request_id__lunl =
+ cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
newcommand->sg_list[0].length = cpu_to_le32(length);
newcommand->sgl_entries__lunh =
@@ -1531,6 +1533,13 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
int retval = 1;
command_que_value = tw_dev->command_packet_phys[request_id];
+
+ /* For 9650SE write low 4 bytes first */
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ command_que_value += TW_COMMAND_OFFSET;
+ writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
+ }
+
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
@@ -1557,13 +1566,17 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
- /* We successfully posted the command packet */
- if (sizeof(dma_addr_t) > 4) {
- command_que_value += TW_COMMAND_OFFSET;
- writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
- writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+ if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
+ /* Now write upper 4 bytes */
+ writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
- writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ if (sizeof(dma_addr_t) > 4) {
+ command_que_value += TW_COMMAND_OFFSET;
+ writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
+ } else {
+ writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
+ }
}
tw_dev->state[request_id] = TW_S_POSTED;
tw_dev->posted_request_count++;
@@ -1620,14 +1633,9 @@ static int twa_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_res
goto out;
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+ clear_bit(TW_IN_RESET, &tw_dev->flags);
+ tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- /* Wake up any ioctl that was pending before the reset */
- if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
- clear_bit(TW_IN_RESET, &tw_dev->flags);
- } else {
- tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
- wake_up(&tw_dev->ioctl_wqueue);
- }
retval = 0;
out:
return retval;
@@ -1736,6 +1744,9 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
+ /* Make sure we are not issuing an ioctl or resetting from ioctl */
+ mutex_lock(&tw_dev->ioctl_lock);
+
/* Now reset the card and some of the device extension data */
if (twa_reset_device_extension(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
@@ -1744,6 +1755,7 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
retval = SUCCESS;
out:
+ mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End twa_scsi_eh_reset() */
@@ -1753,8 +1765,14 @@ static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
+ /* If we are resetting due to timed out ioctl, report as busy */
+ if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
+ retval = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+
/* Check if this FW supports luns */
- if ((SCpnt->device->lun != 0) && (tw_dev->working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
+ if ((SCpnt->device->lun != 0) && (tw_dev->tw_compat_info.working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
SCpnt->result = (DID_BAD_TARGET << 16);
done(SCpnt);
retval = 0;
@@ -1960,6 +1978,9 @@ static void __twa_shutdown(TW_Device_Extension *tw_dev)
/* Disable interrupts */
TW_DISABLE_INTERRUPTS(tw_dev);
+ /* Free up the IRQ */
+ free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
@@ -2091,21 +2112,25 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
/* Initialize the card */
if (twa_reset_sequence(tw_dev, 0))
- goto out_release_mem_region;
+ goto out_iounmap;
/* Set host specific parameters */
- host->max_id = TW_MAX_UNITS;
+ if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
+ host->max_id = TW_MAX_UNITS_9650SE;
+ else
+ host->max_id = TW_MAX_UNITS;
+
host->max_cmd_len = TW_MAX_CDB_LEN;
/* Channels aren't supported by adapter */
- host->max_lun = TW_MAX_LUNS(tw_dev->working_srl);
+ host->max_lun = TW_MAX_LUNS(tw_dev->tw_compat_info.working_srl);
host->max_channel = 0;
/* Register the card with the kernel SCSI layer */
retval = scsi_add_host(host, &pdev->dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
- goto out_release_mem_region;
+ goto out_iounmap;
}
pci_set_drvdata(pdev, host);
@@ -2145,6 +2170,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
out_remove_host:
scsi_remove_host(host);
+out_iounmap:
+ iounmap(tw_dev->base_addr);
out_release_mem_region:
pci_release_regions(pdev);
out_free_device_extension:
@@ -2170,12 +2197,12 @@ static void twa_remove(struct pci_dev *pdev)
twa_major = -1;
}
- /* Free up the IRQ */
- free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
/* Shutdown the card */
__twa_shutdown(tw_dev);
+ /* Free IO remapping */
+ iounmap(tw_dev->base_addr);
+
/* Free up the mem region */
pci_release_regions(pdev);
@@ -2193,6 +2220,8 @@ static struct pci_device_id twa_pci_tbl[] __devinitdata = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index e5685be96f45..7901517d4513 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -289,7 +289,6 @@ static twa_message_type twa_error_table[] = {
#define TW_STATUS_VALID_INTERRUPT 0x00DF0000
/* PCI related defines */
-#define TW_NUMDEVICES 1
#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100
#define TW_PCI_CLEAR_PCI_ABORT 0x2000
@@ -335,6 +334,7 @@ static twa_message_type twa_error_table[] = {
#define TW_ALIGNMENT_9000 4 /* 4 bytes */
#define TW_ALIGNMENT_9000_SGL 0x3
#define TW_MAX_UNITS 16
+#define TW_MAX_UNITS_9650SE 32
#define TW_INIT_MESSAGE_CREDITS 0x100
#define TW_INIT_COMMAND_PACKET_SIZE 0x3
#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6
@@ -354,7 +354,6 @@ static twa_message_type twa_error_table[] = {
#define TW_MAX_RESPONSE_DRAIN 256
#define TW_MAX_AEN_DRAIN 40
#define TW_IN_RESET 2
-#define TW_IN_CHRDEV_IOCTL 3
#define TW_IN_ATTENTION_LOOP 4
#define TW_MAX_SECTORS 256
#define TW_AEN_WAIT_TIME 1000
@@ -417,6 +416,9 @@ static twa_message_type twa_error_table[] = {
#ifndef PCI_DEVICE_ID_3WARE_9550SX
#define PCI_DEVICE_ID_3WARE_9550SX 0x1003
#endif
+#ifndef PCI_DEVICE_ID_3WARE_9650SE
+#define PCI_DEVICE_ID_3WARE_9650SE 0x1004
+#endif
/* Bitmask macros to eliminate bitfields */
@@ -442,6 +444,7 @@ static twa_message_type twa_error_table[] = {
#define TW_CONTROL_REG_ADDR(x) (x->base_addr)
#define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4)
#define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8))
+#define TW_COMMAND_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x20)
#define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC)
#define TW_RESPONSE_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x30)
#define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
@@ -626,6 +629,9 @@ typedef struct TAG_TW_Compatibility_Info
unsigned short driver_srl_low;
unsigned short driver_branch_low;
unsigned short driver_build_low;
+ unsigned short fw_on_ctlr_srl;
+ unsigned short fw_on_ctlr_branch;
+ unsigned short fw_on_ctlr_build;
} TW_Compatibility_Info;
#pragma pack()
@@ -668,9 +674,7 @@ typedef struct TAG_TW_Device_Extension {
wait_queue_head_t ioctl_wqueue;
struct mutex ioctl_lock;
char aen_clobber;
- unsigned short working_srl;
- unsigned short working_branch;
- unsigned short working_build;
+ TW_Compatibility_Info tw_compat_info;
} TW_Device_Extension;
#endif /* _3W_9XXX_H */
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.c b/drivers/scsi/aic94xx/aic94xx_hwi.c
index 3c2d7a379931..af7e01134364 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.c
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.c
@@ -112,6 +112,21 @@ static int asd_init_phy(struct asd_phy *phy)
return 0;
}
+static void asd_init_ports(struct asd_ha_struct *asd_ha)
+{
+ int i;
+
+ spin_lock_init(&asd_ha->asd_ports_lock);
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ struct asd_port *asd_port = &asd_ha->asd_ports[i];
+
+ memset(asd_port->sas_addr, 0, SAS_ADDR_SIZE);
+ memset(asd_port->attached_sas_addr, 0, SAS_ADDR_SIZE);
+ asd_port->phy_mask = 0;
+ asd_port->num_phys = 0;
+ }
+}
+
static int asd_init_phys(struct asd_ha_struct *asd_ha)
{
u8 i;
@@ -121,6 +136,7 @@ static int asd_init_phys(struct asd_ha_struct *asd_ha)
struct asd_phy *phy = &asd_ha->phys[i];
phy->phy_desc = &asd_ha->hw_prof.phy_desc[i];
+ phy->asd_port = NULL;
phy->sas_phy.enabled = 0;
phy->sas_phy.id = i;
@@ -658,6 +674,8 @@ int asd_init_hw(struct asd_ha_struct *asd_ha)
goto Out;
}
+ asd_init_ports(asd_ha);
+
err = asd_init_scbs(asd_ha);
if (err) {
asd_printk("couldn't initialize scbs for %s\n",
diff --git a/drivers/scsi/aic94xx/aic94xx_hwi.h b/drivers/scsi/aic94xx/aic94xx_hwi.h
index 7b6aca02cf70..c6c3d18222fa 100644
--- a/drivers/scsi/aic94xx/aic94xx_hwi.h
+++ b/drivers/scsi/aic94xx/aic94xx_hwi.h
@@ -193,6 +193,16 @@ struct asd_seq_data {
struct asd_ascb **escb_arr; /* array of pointers to escbs */
};
+/* This is an internal port structure. These are used to get accurate
+ * phy_mask for updating DDB 0.
+ */
+struct asd_port {
+ u8 sas_addr[SAS_ADDR_SIZE];
+ u8 attached_sas_addr[SAS_ADDR_SIZE];
+ u32 phy_mask;
+ int num_phys;
+};
+
/* This is the Host Adapter structure. It describes the hardware
* SAS adapter.
*/
@@ -211,6 +221,8 @@ struct asd_ha_struct {
struct hw_profile hw_prof;
struct asd_phy phys[ASD_MAX_PHYS];
+ spinlock_t asd_ports_lock;
+ struct asd_port asd_ports[ASD_MAX_PHYS];
struct asd_sas_port ports[ASD_MAX_PHYS];
struct dma_pool *scb_pool;
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index a4cc432bbdab..57c5ba4043f2 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -786,8 +786,6 @@ static void asd_remove_driver_attrs(struct device_driver *driver)
}
static struct sas_domain_function_template aic94xx_transport_functions = {
- .lldd_port_formed = asd_update_port_links,
-
.lldd_dev_found = asd_dev_found,
.lldd_dev_gone = asd_dev_gone,
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 64d231712345..9050e93bfd5e 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -733,6 +733,7 @@ struct asd_phy {
struct sas_identify_frame *identify_frame;
struct asd_dma_tok *id_frm_tok;
+ struct asd_port *asd_port;
u8 frame_rcvd[ASD_EDB_SIZE];
};
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 7ee49b51b724..b15caf1c8fa2 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -168,6 +168,70 @@ static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
}
}
+static void asd_form_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
+{
+ int i;
+ struct asd_port *free_port = NULL;
+ struct asd_port *port;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
+ if (!phy->asd_port) {
+ for (i = 0; i < ASD_MAX_PHYS; i++) {
+ port = &asd_ha->asd_ports[i];
+
+ /* Check for wide port */
+ if (port->num_phys > 0 &&
+ memcmp(port->sas_addr, sas_phy->sas_addr,
+ SAS_ADDR_SIZE) == 0 &&
+ memcmp(port->attached_sas_addr,
+ sas_phy->attached_sas_addr,
+ SAS_ADDR_SIZE) == 0) {
+ break;
+ }
+
+ /* Find a free port */
+ if (port->num_phys == 0 && free_port == NULL) {
+ free_port = port;
+ }
+ }
+
+ /* Use a free port if this doesn't form a wide port */
+ if (i >= ASD_MAX_PHYS) {
+ port = free_port;
+ BUG_ON(!port);
+ memcpy(port->sas_addr, sas_phy->sas_addr,
+ SAS_ADDR_SIZE);
+ memcpy(port->attached_sas_addr,
+ sas_phy->attached_sas_addr,
+ SAS_ADDR_SIZE);
+ }
+ port->num_phys++;
+ port->phy_mask |= (1U << sas_phy->id);
+ phy->asd_port = port;
+ }
+ ASD_DPRINTK("%s: updating phy_mask 0x%x for phy%d\n",
+ __FUNCTION__, phy->asd_port->phy_mask, sas_phy->id);
+ asd_update_port_links(asd_ha, phy);
+ spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
+}
+
+static void asd_deform_port(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
+{
+ struct asd_port *port = phy->asd_port;
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ unsigned long flags;
+
+ spin_lock_irqsave(&asd_ha->asd_ports_lock, flags);
+ if (port) {
+ port->num_phys--;
+ port->phy_mask &= ~(1U << sas_phy->id);
+ phy->asd_port = NULL;
+ }
+ spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
+}
+
static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
struct done_list_struct *dl,
int edb_id, int phy_id)
@@ -187,6 +251,7 @@ static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
asd_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
asd_dump_frame_rcvd(phy, dl);
+ asd_form_port(ascb->ha, phy);
sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
}
@@ -197,6 +262,7 @@ static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
struct asd_ha_struct *asd_ha = ascb->ha;
struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
u8 lr_error = dl->status_block[1];
u8 retries_left = dl->status_block[2];
@@ -221,6 +287,7 @@ static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(sas_phy);
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
if (retries_left == 0) {
@@ -248,6 +315,8 @@ static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
unsigned long flags;
struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
u8 reg = dl->status_block[1];
u32 cont = dl->status_block[2] << ((reg & 3)*8);
@@ -284,6 +353,7 @@ static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
phy_id);
/* The sequencer disables all phys on that port.
* We have to re-enable the phys ourselves. */
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
break;
@@ -351,6 +421,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
u8 sb_opcode = dl->status_block[0];
int phy_id = sb_opcode & DL_PHY_MASK;
struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+ struct asd_phy *phy = &asd_ha->phys[phy_id];
if (edb > 6 || edb < 0) {
ASD_DPRINTK("edb is 0x%x! dl->opcode is 0x%x\n",
@@ -395,6 +466,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
asd_turn_led(asd_ha, phy_id, 0);
/* the device is gone */
sas_phy_disconnected(sas_phy);
+ asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
break;
case REQ_TASK_ABORT:
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.c b/drivers/scsi/aic94xx/aic94xx_seq.c
index 56e4b3ba6a08..845112539d05 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.c
+++ b/drivers/scsi/aic94xx/aic94xx_seq.c
@@ -1369,10 +1369,9 @@ int asd_start_seqs(struct asd_ha_struct *asd_ha)
* port_map_by_links is also used as the conn_mask byte in the
* initiator/target port DDB.
*/
-void asd_update_port_links(struct asd_sas_phy *sas_phy)
+void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
{
- struct asd_ha_struct *asd_ha = sas_phy->ha->lldd_ha;
- const u8 phy_mask = (u8) sas_phy->port->phy_mask;
+ const u8 phy_mask = (u8) phy->asd_port->phy_mask;
u8 phy_is_up;
u8 mask;
int i, err;
diff --git a/drivers/scsi/aic94xx/aic94xx_seq.h b/drivers/scsi/aic94xx/aic94xx_seq.h
index 42281c36153b..9e715e5496af 100644
--- a/drivers/scsi/aic94xx/aic94xx_seq.h
+++ b/drivers/scsi/aic94xx/aic94xx_seq.h
@@ -64,7 +64,7 @@ int asd_unpause_lseq(struct asd_ha_struct *asd_ha, u8 lseq_mask);
int asd_init_seqs(struct asd_ha_struct *asd_ha);
int asd_start_seqs(struct asd_ha_struct *asd_ha);
-void asd_update_port_links(struct asd_sas_phy *phy);
+void asd_update_port_links(struct asd_ha_struct *asd_ha, struct asd_phy *phy);
#endif
#endif
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 4bc14ad92e22..4c698a71f66f 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -3531,7 +3531,7 @@ static irqreturn_t gdth_interrupt(int irq,void *dev_id)
IStatus &= ~0x80;
#ifdef INT_COAL
if (coalesced)
- ha->status = pcs->ext_status && 0xffff;
+ ha->status = pcs->ext_status & 0xffff;
else
#endif
ha->status = gdth_readw(&dp6m_ptr->i960r.status);
@@ -3543,7 +3543,7 @@ static irqreturn_t gdth_interrupt(int irq,void *dev_id)
if (coalesced) {
ha->info = pcs->info0;
ha->info2 = pcs->info1;
- ha->service = (pcs->ext_status >> 16) && 0xffff;
+ ha->service = (pcs->ext_status >> 16) & 0xffff;
} else
#endif
{
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index 0a9dbc59663f..d0b139cccbbc 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -415,8 +415,8 @@ iscsi_r2t_rsp(struct iscsi_conn *conn, struct iscsi_cmd_task *ctask)
iscsi_solicit_data_init(conn, ctask, r2t);
tcp_ctask->exp_r2tsn = r2tsn + 1;
- tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
__kfifo_put(tcp_ctask->r2tqueue, (void*)&r2t, sizeof(void*));
+ tcp_ctask->xmstate |= XMSTATE_SOL_HDR;
list_move_tail(&ctask->running, &conn->xmitqueue);
scsi_queue_work(session->host, &conn->xmitwork);
@@ -1627,9 +1627,12 @@ static int iscsi_send_sol_pdu(struct iscsi_conn *conn,
if (tcp_ctask->xmstate & XMSTATE_SOL_HDR) {
tcp_ctask->xmstate &= ~XMSTATE_SOL_HDR;
tcp_ctask->xmstate |= XMSTATE_SOL_DATA;
- if (!tcp_ctask->r2t)
+ if (!tcp_ctask->r2t) {
+ spin_lock_bh(&session->lock);
__kfifo_get(tcp_ctask->r2tqueue, (void*)&tcp_ctask->r2t,
sizeof(void*));
+ spin_unlock_bh(&session->lock);
+ }
send_hdr:
r2t = tcp_ctask->r2t;
dtask = &r2t->dtask;
@@ -1816,21 +1819,14 @@ iscsi_tcp_conn_destroy(struct iscsi_cls_conn *cls_conn)
{
struct iscsi_conn *conn = cls_conn->dd_data;
struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
- int digest = 0;
-
- if (conn->hdrdgst_en || conn->datadgst_en)
- digest = 1;
iscsi_tcp_release_conn(conn);
iscsi_conn_teardown(cls_conn);
- /* now free tcp_conn */
- if (digest) {
- if (tcp_conn->tx_hash.tfm)
- crypto_free_hash(tcp_conn->tx_hash.tfm);
- if (tcp_conn->rx_hash.tfm)
- crypto_free_hash(tcp_conn->rx_hash.tfm);
- }
+ if (tcp_conn->tx_hash.tfm)
+ crypto_free_hash(tcp_conn->tx_hash.tfm);
+ if (tcp_conn->rx_hash.tfm)
+ crypto_free_hash(tcp_conn->rx_hash.tfm);
kfree(tcp_conn);
}
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 2865ebd557ef..5d8862189485 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -975,13 +975,13 @@ int iscsi_eh_host_reset(struct scsi_cmnd *sc)
if (session->state == ISCSI_STATE_TERMINATE) {
failed:
debug_scsi("failing host reset: session terminated "
- "[CID %d age %d]", conn->id, session->age);
+ "[CID %d age %d]\n", conn->id, session->age);
spin_unlock_bh(&session->lock);
return FAILED;
}
if (sc->SCp.phase == session->age) {
- debug_scsi("failing connection CID %d due to SCSI host reset",
+ debug_scsi("failing connection CID %d due to SCSI host reset\n",
conn->id);
fail_session = 1;
}
@@ -1054,7 +1054,8 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
NULL, 0);
if (rc) {
iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
- debug_scsi("abort sent failure [itt 0x%x] %d", ctask->itt, rc);
+ debug_scsi("abort sent failure [itt 0x%x] %d\n", ctask->itt,
+ rc);
return rc;
}
@@ -1071,7 +1072,7 @@ static int iscsi_exec_abort_task(struct scsi_cmnd *sc,
conn->tmabort_timer.function = iscsi_tmabort_timedout;
conn->tmabort_timer.data = (unsigned long)ctask;
add_timer(&conn->tmabort_timer);
- debug_scsi("abort set timeout [itt 0x%x]", ctask->itt);
+ debug_scsi("abort set timeout [itt 0x%x]\n", ctask->itt);
}
spin_unlock_bh(&session->lock);
mutex_unlock(&conn->xmitmutex);
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 30b8014bcc7a..e34a93435497 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -71,55 +71,65 @@ static void smp_task_done(struct sas_task *task)
static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
void *resp, int resp_size)
{
- int res;
- struct sas_task *task = sas_alloc_task(GFP_KERNEL);
+ int res, retry;
+ struct sas_task *task = NULL;
struct sas_internal *i =
to_sas_internal(dev->port->ha->core.shost->transportt);
- if (!task)
- return -ENOMEM;
-
- task->dev = dev;
- task->task_proto = dev->tproto;
- sg_init_one(&task->smp_task.smp_req, req, req_size);
- sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
+ for (retry = 0; retry < 3; retry++) {
+ task = sas_alloc_task(GFP_KERNEL);
+ if (!task)
+ return -ENOMEM;
- task->task_done = smp_task_done;
+ task->dev = dev;
+ task->task_proto = dev->tproto;
+ sg_init_one(&task->smp_task.smp_req, req, req_size);
+ sg_init_one(&task->smp_task.smp_resp, resp, resp_size);
- task->timer.data = (unsigned long) task;
- task->timer.function = smp_task_timedout;
- task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
- add_timer(&task->timer);
+ task->task_done = smp_task_done;
- res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+ task->timer.data = (unsigned long) task;
+ task->timer.function = smp_task_timedout;
+ task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
+ add_timer(&task->timer);
- if (res) {
- del_timer(&task->timer);
- SAS_DPRINTK("executing SMP task failed:%d\n", res);
- goto ex_err;
- }
+ res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
- wait_for_completion(&task->completion);
- res = -ETASK;
- if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
- SAS_DPRINTK("smp task timed out or aborted\n");
- i->dft->lldd_abort_task(task);
- if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
- SAS_DPRINTK("SMP task aborted and not done\n");
+ if (res) {
+ del_timer(&task->timer);
+ SAS_DPRINTK("executing SMP task failed:%d\n", res);
goto ex_err;
}
+
+ wait_for_completion(&task->completion);
+ res = -ETASK;
+ if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+ SAS_DPRINTK("smp task timed out or aborted\n");
+ i->dft->lldd_abort_task(task);
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+ SAS_DPRINTK("SMP task aborted and not done\n");
+ goto ex_err;
+ }
+ }
+ if (task->task_status.resp == SAS_TASK_COMPLETE &&
+ task->task_status.stat == SAM_GOOD) {
+ res = 0;
+ break;
+ } else {
+ SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
+ "status 0x%x\n", __FUNCTION__,
+ SAS_ADDR(dev->sas_addr),
+ task->task_status.resp,
+ task->task_status.stat);
+ sas_free_task(task);
+ task = NULL;
+ }
}
- if (task->task_status.resp == SAS_TASK_COMPLETE &&
- task->task_status.stat == SAM_GOOD)
- res = 0;
- else
- SAS_DPRINTK("%s: task to dev %016llx response: 0x%x "
- "status 0x%x\n", __FUNCTION__,
- SAS_ADDR(dev->sas_addr),
- task->task_status.resp,
- task->task_status.stat);
ex_err:
- sas_free_task(task);
+ BUG_ON(retry == 3 && task != NULL);
+ if (task != NULL) {
+ sas_free_task(task);
+ }
return res;
}
diff --git a/drivers/scsi/psi240i.c b/drivers/scsi/psi240i.c
index ac0419e2714a..899e89d6fe67 100644
--- a/drivers/scsi/psi240i.c
+++ b/drivers/scsi/psi240i.c
@@ -328,7 +328,7 @@ static void Irq_Handler (int irq, void *dev_id)
pinquiryData->AdditionalLength = 35 - 4;
// Fill in vendor identification fields.
- for ( z = 0; z < 20; z += 2 )
+ for ( z = 0; z < 8; z += 2 )
{
pinquiryData->VendorId[z] = ((UCHAR *)identifyData.ModelNumber)[z + 1];
pinquiryData->VendorId[z + 1] = ((UCHAR *)identifyData.ModelNumber)[z];
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d2c02df12fdc..3ac4890ce086 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -410,6 +410,7 @@ int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd,
goto free_req;
req->cmd_len = cmd_len;
+ memset(req->cmd, 0, BLK_MAX_CDB); /* ATAPI hates garbage after CDB */
memcpy(req->cmd, cmd, req->cmd_len);
req->sense = sioc->sense;
req->sense_len = 0;
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 2d3baa99ca25..9b25124a989e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -33,7 +33,7 @@
#define ISCSI_SESSION_ATTRS 11
#define ISCSI_CONN_ATTRS 11
#define ISCSI_HOST_ATTRS 0
-#define ISCSI_TRANSPORT_VERSION "2.0-685"
+#define ISCSI_TRANSPORT_VERSION "2.0-724"
struct iscsi_internal {
int daemon_pid;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 3f8b93188567..81e3bc7b02a1 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -60,7 +60,7 @@ static int sg_version_num = 30534; /* 2 digits for each component */
#ifdef CONFIG_SCSI_PROC_FS
#include <linux/proc_fs.h>
-static char *sg_version_date = "20060920";
+static char *sg_version_date = "20061027";
static int sg_proc_init(void);
static void sg_proc_cleanup(void);
@@ -710,12 +710,12 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
(int) cmnd[0], (int) hp->cmd_len));
if ((k = sg_start_req(srp))) {
- SCSI_LOG_TIMEOUT(1, printk("sg_write: start_req err=%d\n", k));
+ SCSI_LOG_TIMEOUT(1, printk("sg_common_write: start_req err=%d\n", k));
sg_finish_rem_req(srp);
return k; /* probably out of space --> ENOMEM */
}
if ((k = sg_write_xfer(srp))) {
- SCSI_LOG_TIMEOUT(1, printk("sg_write: write_xfer, bad address\n"));
+ SCSI_LOG_TIMEOUT(1, printk("sg_common_write: write_xfer, bad address\n"));
sg_finish_rem_req(srp);
return k;
}
@@ -746,7 +746,7 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
hp->dxfer_len, srp->data.k_use_sg, timeout,
SG_DEFAULT_RETRIES, srp, sg_cmd_done,
GFP_ATOMIC)) {
- SCSI_LOG_TIMEOUT(1, printk("sg_write: scsi_execute_async failed\n"));
+ SCSI_LOG_TIMEOUT(1, printk("sg_common_write: scsi_execute_async failed\n"));
/*
* most likely out of mem, but could also be a bad map
*/
@@ -1283,7 +1283,7 @@ sg_cmd_done(void *data, char *sense, int result, int resid)
sg_finish_rem_req(srp);
srp = NULL;
if (NULL == sfp->headrp) {
- SCSI_LOG_TIMEOUT(1, printk("sg...bh: already closed, final cleanup\n"));
+ SCSI_LOG_TIMEOUT(1, printk("sg_cmd_done: already closed, final cleanup\n"));
if (0 == sg_remove_sfp(sdp, sfp)) { /* device still present */
scsi_device_put(sdp->device);
}
@@ -1512,12 +1512,12 @@ sg_remove(struct class_device *cl_dev, struct class_interface *cl_intf)
POLL_HUP);
}
}
- SCSI_LOG_TIMEOUT(3, printk("sg_detach: dev=%d, dirty\n", k));
+ SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d, dirty\n", k));
if (NULL == sdp->headfp) {
sg_dev_arr[k] = NULL;
}
} else { /* nothing active, simple case */
- SCSI_LOG_TIMEOUT(3, printk("sg_detach: dev=%d\n", k));
+ SCSI_LOG_TIMEOUT(3, printk("sg_remove: dev=%d\n", k));
sg_dev_arr[k] = NULL;
}
sg_nr_dev--;
@@ -1876,14 +1876,15 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size)
}
}
sg->page = p;
- sg->length = ret_sz;
+ sg->length = (ret_sz > num) ? num : ret_sz;
- SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n",
- k, p, ret_sz));
+ SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k=%d, num=%d, "
+ "ret_sz=%d\n", k, num, ret_sz));
} /* end of for loop */
schp->k_use_sg = k;
- SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k_use_sg=%d, rem_sz=%d\n", k, rem_sz));
+ SCSI_LOG_TIMEOUT(5, printk("sg_build_indirect: k_use_sg=%d, "
+ "rem_sz=%d\n", k, rem_sz));
schp->bufflen = blk_size;
if (rem_sz > 0) /* must have failed */
@@ -2014,7 +2015,7 @@ sg_remove_scat(Sg_scatter_hold * schp)
for (k = 0; (k < schp->k_use_sg) && sg->page;
++k, ++sg) {
SCSI_LOG_TIMEOUT(5, printk(
- "sg_remove_scat: k=%d, a=0x%p, len=%d\n",
+ "sg_remove_scat: k=%d, pg=0x%p, len=%d\n",
k, sg->page, sg->length));
sg_page_free(sg->page, sg->length);
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index fccd1952bad3..7729c0744886 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -828,10 +828,7 @@ char *usb_cache_string(struct usb_device *udev, int index)
* Context: !in_interrupt ()
*
* Updates the copy of the device descriptor stored in the device structure,
- * which dedicates space for this purpose. Note that several fields are
- * converted to the host CPU's byte order: the USB version (bcdUSB), and
- * vendors product and version fields (idVendor, idProduct, and bcdDevice).
- * That lets device drivers compare against non-byteswapped constants.
+ * which dedicates space for this purpose.
*
* Not exported, only for use by the core. If drivers really want to read
* the device descriptor directly, they can call usb_get_descriptor() with
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9be6b303e784..ea4714e557e4 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -715,13 +715,6 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
return IRQ_NOTMINE;
}
- if (ints & OHCI_INTR_RHSC) {
- ohci_vdbg (ohci, "rhsc\n");
- ohci->next_statechange = jiffies + STATECHANGE_DELAY;
- ohci_writel (ohci, OHCI_INTR_RHSC, &regs->intrstatus);
- usb_hcd_poll_rh_status(hcd);
- }
-
if (ints & OHCI_INTR_UE) {
disable (ohci);
ohci_err (ohci, "OHCI Unrecoverable Error, disabled\n");
@@ -731,9 +724,21 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
ohci_usb_reset (ohci);
}
- if (ints & OHCI_INTR_RD) {
- ohci_vdbg (ohci, "resume detect\n");
- ohci_writel (ohci, OHCI_INTR_RD, &regs->intrstatus);
+ if (ints & OHCI_INTR_RHSC) {
+ ohci_vdbg(ohci, "rhsc\n");
+ ohci->next_statechange = jiffies + STATECHANGE_DELAY;
+ ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
+ &regs->intrstatus);
+ usb_hcd_poll_rh_status(hcd);
+ }
+
+ /* For connect and disconnect events, we expect the controller
+ * to turn on RHSC along with RD. But for remote wakeup events
+ * this might not happen.
+ */
+ else if (ints & OHCI_INTR_RD) {
+ ohci_vdbg(ohci, "resume detect\n");
+ ohci_writel(ohci, OHCI_INTR_RD, &regs->intrstatus);
hcd->poll_rh = 1;
if (ohci->autostop) {
spin_lock (&ohci->lock);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 6f113596af66..6995ea36f2e8 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -169,7 +169,8 @@ __acquires(ohci->lock)
break;
case OHCI_USB_RESUME:
/* HCFS changes sometime after INTR_RD */
- ohci_info (ohci, "wakeup\n");
+ ohci_info(ohci, "%swakeup\n",
+ autostopped ? "auto-" : "");
break;
case OHCI_USB_OPER:
/* this can happen after resuming a swsusp snapshot */
@@ -422,7 +423,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (time_after_eq (jiffies,
+ } else if (device_may_wakeup(&hcd->self.root_hub->dev)
+ && time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 6daf85c6eeee..6d08a3bcc952 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1797,11 +1797,12 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
{ USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x0217, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
{ USB_VENDOR_ID_APPLE, 0x0219, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, 0x021B, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
{ USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
diff --git a/drivers/usb/input/hid-input.c b/drivers/usb/input/hid-input.c
index 9a808a3b4d37..68e7ebb978a9 100644
--- a/drivers/usb/input/hid-input.c
+++ b/drivers/usb/input/hid-input.c
@@ -121,6 +121,12 @@ static struct hidinput_key_translation powerbook_numlock_keys[] = {
{ }
};
+static struct hidinput_key_translation powerbook_iso_keyboard[] = {
+ { KEY_GRAVE, KEY_102ND },
+ { KEY_102ND, KEY_GRAVE },
+ { }
+};
+
static int usbhid_pb_fnmode = 1;
module_param_named(pb_fnmode, usbhid_pb_fnmode, int, 0644);
MODULE_PARM_DESC(pb_fnmode,
@@ -195,6 +201,14 @@ static int hidinput_pb_event(struct hid_device *hid, struct input_dev *input,
}
}
+ if (hid->quirks & HID_QUIRK_POWERBOOK_ISO_KEYBOARD) {
+ trans = find_translation(powerbook_iso_keyboard, usage->code);
+ if (trans) {
+ input_event(input, usage->type, trans->to, value);
+ return 1;
+ }
+ }
+
return 0;
}
@@ -210,6 +224,9 @@ static void hidinput_pb_setup(struct input_dev *input)
for (trans = powerbook_numlock_keys; trans->from; trans++)
set_bit(trans->to, input->keybit);
+
+ for (trans = powerbook_iso_keyboard; trans->from; trans++)
+ set_bit(trans->to, input->keybit);
}
#else
static inline int hidinput_pb_event(struct hid_device *hid, struct input_dev *input,
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 9b50effef758..0e76e6dcac37 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -260,6 +260,7 @@ struct hid_item {
#define HID_QUIRK_POWERBOOK_HAS_FN 0x00001000
#define HID_QUIRK_POWERBOOK_FN_ON 0x00002000
#define HID_QUIRK_INVERT_HWHEEL 0x00004000
+#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000
/*
* This is the global environment of the parser. This information is
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index 0be9d62d62ae..e4971d6aaafb 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -780,7 +780,7 @@ static int auerbuf_setup (pauerbufctl_t bcp, unsigned int numElements, unsigned
bl_fail:/* not enough memory. Free allocated elements */
dbg ("auerbuf_setup: no more memory");
- kfree(bep);
+ auerbuf_free(bep);
auerbuf_free_buffers (bcp);
return -ENOMEM;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index bd76b4c11fcc..c186b4e73c72 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -311,6 +311,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_DMX4ALL) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_8U232AM_ALT_PID) },
@@ -511,6 +512,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13M_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
+ { USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f0edb87d2dd5..bae117d359af 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -55,6 +55,9 @@
/* iPlus device */
#define FTDI_IPLUS_PID 0xD070 /* Product Id */
+/* DMX4ALL DMX Interfaces */
+#define FTDI_DMX4ALL 0xC850
+
/* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */
/* they use the ftdi chipset for the USB interface and the vendor id is the same */
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
@@ -175,9 +178,15 @@
#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
/*
+ * FTDI USB UART chips used in construction projects from the
+ * Elektor Electronics magazine (http://elektor-electronics.co.uk)
+ */
+#define ELEKTOR_VID 0x0C7D
+#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
+
+/*
* DSS-20 Sync Station for Sony Ericsson P800
*/
-
#define FTDI_DSS20_PID 0xFC82
/*
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 6238aff1e772..d72cf8bc7f76 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -320,6 +320,7 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x0B05, 0x9200) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0B05, 0x9202) }, /* ASUS USB Sync */
{ USB_DEVICE(0x0BB4, 0x00CE) }, /* HTC USB Sync */
+ { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC USB Modem */
{ USB_DEVICE(0x0BB4, 0x0A01) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A02) }, /* PocketPC USB Sync */
{ USB_DEVICE(0x0BB4, 0x0A03) }, /* PocketPC USB Sync */
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index bc1ac07bf6ce..efb047f431e8 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1306,25 +1306,13 @@ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
-UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
- "Sony Ericsson",
- "P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
-UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
- "Sony Ericsson",
- "P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
+ * Devices with bcd > 110 seem to not need it while those
+ * with bcd < 110 appear to need it.
*/
-UNUSUAL_DEV( 0x1019, 0x0c55, 0x0110, 0x0110,
+UNUSUAL_DEV( 0x1019, 0x0c55, 0x0000, 0x0110,
"Desknote",
"UCR-61S2B",
US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index b77b30923928..e815b354c09d 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -406,7 +406,7 @@ static struct {
{ PCI_CHIP_MACH64LB, "3D RAGE LT PRO (Mach64 LB, AGP)", 236, 75, 100, 135, ATI_CHIP_264LTPRO },
{ PCI_CHIP_MACH64LD, "3D RAGE LT PRO (Mach64 LD, AGP)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
{ PCI_CHIP_MACH64LI, "3D RAGE LT PRO (Mach64 LI, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1_1 | M64F_G3_PB_1024x768 },
- { PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
+ { PCI_CHIP_MACH64LP, "3D RAGE LT PRO (Mach64 LP, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO | M64F_G3_PB_1024x768 },
{ PCI_CHIP_MACH64LQ, "3D RAGE LT PRO (Mach64 LQ, PCI)", 230, 100, 100, 135, ATI_CHIP_264LTPRO },
{ PCI_CHIP_MACH64GM, "3D RAGE XL (Mach64 GM, AGP 2x)", 230, 83, 63, 135, ATI_CHIP_264XL },
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
index 676754520099..869725a13c21 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/aty/radeon_i2c.c
@@ -139,7 +139,13 @@ void radeon_delete_i2c_busses(struct radeonfb_info *rinfo)
int radeon_probe_i2c_connector(struct radeonfb_info *rinfo, int conn,
u8 **out_edid)
{
- u8 *edid = fb_ddc_read(&rinfo->i2c[conn-1].adapter);
+ u32 reg = rinfo->i2c[conn-1].ddc_reg;
+ u8 *edid;
+
+ OUTREG(reg, INREG(reg) &
+ ~(VGA_DDC_DATA_OUTPUT | VGA_DDC_CLK_OUTPUT));
+
+ edid = fb_ddc_read(&rinfo->i2c[conn-1].adapter);
if (out_edid)
*out_edid = edid;
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fb_ddc.c
index 3aa6ebf68f17..f836137a0eda 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fb_ddc.c
@@ -20,26 +20,26 @@
static unsigned char *fb_do_probe_ddc_edid(struct i2c_adapter *adapter)
{
unsigned char start = 0x0;
+ unsigned char *buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
struct i2c_msg msgs[] = {
{
.addr = DDC_ADDR,
+ .flags = 0,
.len = 1,
.buf = &start,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = EDID_LENGTH,
+ .buf = buf,
}
};
- unsigned char *buf;
- buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
if (!buf) {
dev_warn(&adapter->dev, "unable to allocate memory for EDID "
"block.\n");
return NULL;
}
- msgs[1].buf = buf;
if (i2c_transfer(adapter, msgs, 2) == 2)
return buf;
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c
index 61dc46fecf2b..eab3e282a4de 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/nvidia/nv_setup.c
@@ -262,7 +262,7 @@ static void nv10GetConfig(struct nvidia_par *par)
#endif
dev = pci_find_slot(0, 1);
- if ((par->Chipset && 0xffff) == 0x01a0) {
+ if ((par->Chipset & 0xffff) == 0x01a0) {
int amt = 0;
pci_read_config_dword(dev, 0x7c, &amt);
diff --git a/drivers/video/pnx4008/pnxrgbfb.c b/drivers/video/pnx4008/pnxrgbfb.c
index 7d9453c91a42..f29e66e2d774 100644
--- a/drivers/video/pnx4008/pnxrgbfb.c
+++ b/drivers/video/pnx4008/pnxrgbfb.c
@@ -154,7 +154,8 @@ static int __devinit rgbfb_probe(struct platform_device *pdev)
goto err1;
}
- if (!fb_get_options("pnxrgbfb", &option) && !strcmp(option, "nocursor"))
+ if (!fb_get_options("pnxrgbfb", &option) && option &&
+ !strcmp(option, "nocursor"))
rgbfb_ops.fb_cursor = no_cursor;
info->node = -1;
@@ -191,7 +192,7 @@ err:
static struct platform_driver rgbfb_driver = {
.driver = {
- .name = "rgbfb",
+ .name = "pnx4008-rgbfb",
},
.probe = rgbfb_probe,
.remove = rgbfb_remove,
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 51f0ecc2a511..d23bf0d659b6 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -848,7 +848,7 @@ static int sdum_remove(struct platform_device *pdev)
static struct platform_driver sdum_driver = {
.driver = {
- .name = "sdum",
+ .name = "pnx4008-sdum",
},
.probe = sdum_probe,
.remove = sdum_remove,
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index 2788b8ca9bb1..6f9d880ab2e9 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -215,6 +215,8 @@ static int __devinit matrox_w1_probe(struct pci_dev *pdev, const struct pci_devi
return 0;
err_out_free_device:
+ if (dev->virt_addr)
+ iounmap(dev->virt_addr);
kfree(dev);
return err;
OpenPOWER on IntegriCloud