diff options
Diffstat (limited to 'drivers')
26 files changed, 2560 insertions, 259 deletions
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig index f9bf7ff7fcaf..bcb58fb76b9f 100644 --- a/drivers/iio/common/cros_ec_sensors/Kconfig +++ b/drivers/iio/common/cros_ec_sensors/Kconfig @@ -21,3 +21,12 @@ config IIO_CROS_EC_SENSORS Accelerometers, Gyroscope and Magnetometer that are presented by the ChromeOS EC Sensor hub. Creates an IIO device for each functions. + +config IIO_CROS_EC_SENSORS_LID_ANGLE + tristate "ChromeOS EC Sensor for lid angle" + depends on IIO_CROS_EC_SENSORS_CORE + help + Module to report the angle between lid and base for some + convertible devices. + This module is loaded when the EC can calculate the angle between the base + and the lid. diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile index 7c2d6a966fe6..e0a33ab66d21 100644 --- a/drivers/iio/common/cros_ec_sensors/Makefile +++ b/drivers/iio/common/cros_ec_sensors/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c new file mode 100644 index 000000000000..876dfd176b0e --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor. + * + * Copyright 2018 Google, Inc + * + * This driver uses the cros-ec interface to communicate with the Chrome OS + * EC about counter sensors. Counters are presented through + * iio sysfs. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define DRV_NAME "cros-ec-lid-angle" + +/* + * One channel for the lid angle, the other for timestamp. + */ +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = { + { + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_type.realbits = CROS_EC_SENSOR_BITS, + .scan_type.storagebits = CROS_EC_SENSOR_BITS, + .scan_type.sign = 'u', + .type = IIO_ANGL + }, + IIO_CHAN_SOFT_TIMESTAMP(1) +}; + +/* State data for ec_sensors iio driver. */ +struct cros_ec_lid_angle_state { + /* Shared by all sensors */ + struct cros_ec_sensors_core_state core; +}; + +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + int ret; + + st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE; + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle)); + if (ret) { + dev_warn(&indio_dev->dev, "Unable to read lid angle\n"); + return ret; + } + + *data = st->resp->lid_angle.value; + return 0; +} + +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cros_ec_lid_angle_state *st = iio_priv(indio_dev); + s16 data; + int ret; + + mutex_lock(&st->core.cmd_lock); + ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data); + if (ret == 0) { + *val = data; + ret = IIO_VAL_INT; + } + mutex_unlock(&st->core.cmd_lock); + return ret; +} + +static const struct iio_info cros_ec_lid_angle_info = { + .read_raw = &cros_ec_lid_angle_read, +}; + +static int cros_ec_lid_angle_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct cros_ec_lid_angle_state *state; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + ret = cros_ec_sensors_core_init(pdev, indio_dev, false); + if (ret) + return ret; + + indio_dev->info = &cros_ec_lid_angle_info; + state = iio_priv(indio_dev); + indio_dev->channels = cros_ec_lid_angle_channels; + indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels); + + state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + cros_ec_sensors_capture, NULL); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct platform_device_id cros_ec_lid_angle_ids[] = { + { + .name = DRV_NAME, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids); + +static struct platform_driver cros_ec_lid_angle_platform_driver = { + .driver = { + .name = DRV_NAME, + .pm = &cros_ec_sensors_pm_ops, + }, + .probe = cros_ec_lid_angle_probe, + .id_table = cros_ec_lid_angle_ids, +}; +module_platform_driver(cros_ec_lid_angle_platform_driver); + +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index d56001181598..38cb6d82d8fe 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -237,7 +237,7 @@ static int cros_ec_keyb_work(struct notifier_block *nb, if (queued_during_suspend && !device_may_wakeup(ckdev->dev)) return NOTIFY_OK; - switch (ckdev->ec->event_data.event_type) { + switch (ckdev->ec->event_data.event_type & EC_MKBP_EVENT_TYPE_MASK) { case EC_MKBP_EVENT_KEY_MATRIX: pm_wakeup_event(ckdev->dev, 0); diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c index 5d5c41ac3845..2a9ac5213893 100644 --- a/drivers/mfd/cros_ec.c +++ b/drivers/mfd/cros_ec.c @@ -102,12 +102,16 @@ static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event) /* For now, report failure to transition to S0ix with a warning. */ if (ret >= 0 && ec_dev->host_sleep_v1 && - (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME)) + (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME)) { + ec_dev->last_resume_result = + buf.u.resp1.resume_response.sleep_transitions; + WARN_ONCE(buf.u.resp1.resume_response.sleep_transitions & EC_HOST_RESUME_SLEEP_TIMEOUT, "EC detected sleep transition timeout. Total slp_s0 transitions: %d", buf.u.resp1.resume_response.sleep_transitions & EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK); + } return ret; } diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig index 2826f7136f65..970679d0b6f6 100644 --- a/drivers/platform/chrome/Kconfig +++ b/drivers/platform/chrome/Kconfig @@ -72,6 +72,19 @@ config CROS_EC_RPMSG To compile this driver as a module, choose M here: the module will be called cros_ec_rpmsg. +config CROS_EC_ISHTP + tristate "ChromeOS Embedded Controller (ISHTP)" + depends on MFD_CROS_EC + depends on INTEL_ISH_HID + help + If you say Y here, you get support for talking to the ChromeOS EC + firmware running on Intel Integrated Sensor Hub (ISH), using the + ISH Transport protocol (ISH-TP). This uses a simple byte-level + protocol with a checksum. + + To compile this driver as a module, choose M here: the + module will be called cros_ec_ishtp. + config CROS_EC_SPI tristate "ChromeOS Embedded Controller (SPI)" depends on MFD_CROS_EC && SPI @@ -83,28 +96,17 @@ config CROS_EC_SPI 'pre-amble' bytes before the response actually starts. config CROS_EC_LPC - tristate "ChromeOS Embedded Controller (LPC)" - depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST) - help - If you say Y here, you get support for talking to the ChromeOS EC - over an LPC bus. This uses a simple byte-level protocol with a - checksum. This is used for userspace access only. The kernel - typically has its own communication methods. - - To compile this driver as a module, choose M here: the - module will be called cros_ec_lpc. - -config CROS_EC_LPC_MEC - bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant" - depends on CROS_EC_LPC - default n + tristate "ChromeOS Embedded Controller (LPC)" + depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST) help - If you say Y here, a variant LPC protocol for the Microchip EC - will be used. Note that this variant is not backward compatible - with non-Microchip ECs. + If you say Y here, you get support for talking to the ChromeOS EC + over an LPC bus, including the LPC Microchip EC (MEC) variant. + This uses a simple byte-level protocol with a checksum. This is + used for userspace access only. The kernel typically has its own + communication methods. - If you have a ChromeOS Embedded Controller Microchip EC variant - choose Y here. + To compile this driver as a module, choose M here: the + module will be called cros_ec_lpcs. config CROS_EC_PROTO bool diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile index 1b2f1dcfcd5c..fd0af05cc14c 100644 --- a/drivers/platform/chrome/Makefile +++ b/drivers/platform/chrome/Makefile @@ -7,10 +7,10 @@ obj-$(CONFIG_CHROMEOS_LAPTOP) += chromeos_laptop.o obj-$(CONFIG_CHROMEOS_PSTORE) += chromeos_pstore.o obj-$(CONFIG_CHROMEOS_TBMC) += chromeos_tbmc.o obj-$(CONFIG_CROS_EC_I2C) += cros_ec_i2c.o +obj-$(CONFIG_CROS_EC_ISHTP) += cros_ec_ishtp.o obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o -cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_reg.o -cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC) += cros_ec_lpc_mec.o +cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_mec.o obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o obj-$(CONFIG_CROS_EC_PROTO) += cros_ec_proto.o cros_ec_trace.o obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT) += cros_kbd_led_backlight.o diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c index 4c2a27f6a6d0..8ec1cc2889f2 100644 --- a/drivers/platform/chrome/cros_ec_debugfs.c +++ b/drivers/platform/chrome/cros_ec_debugfs.c @@ -25,7 +25,8 @@ #define CIRC_ADD(idx, size, value) (((idx) + (value)) & ((size) - 1)) -/* struct cros_ec_debugfs - ChromeOS EC debugging information +/** + * struct cros_ec_debugfs - EC debugging information. * * @ec: EC device this debugfs information belongs to * @dir: dentry for debugfs files @@ -241,7 +242,35 @@ static ssize_t cros_ec_pdinfo_read(struct file *file, read_buf, p - read_buf); } -const struct file_operations cros_ec_console_log_fops = { +static ssize_t cros_ec_uptime_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct cros_ec_debugfs *debug_info = file->private_data; + struct cros_ec_device *ec_dev = debug_info->ec->ec_dev; + struct { + struct cros_ec_command cmd; + struct ec_response_uptime_info resp; + } __packed msg = {}; + struct ec_response_uptime_info *resp; + char read_buf[32]; + int ret; + + resp = (struct ec_response_uptime_info *)&msg.resp; + + msg.cmd.command = EC_CMD_GET_UPTIME_INFO; + msg.cmd.insize = sizeof(*resp); + + ret = cros_ec_cmd_xfer_status(ec_dev, &msg.cmd); + if (ret < 0) + return ret; + + ret = scnprintf(read_buf, sizeof(read_buf), "%u\n", + resp->time_since_ec_boot_ms); + + return simple_read_from_buffer(user_buf, count, ppos, read_buf, ret); +} + +static const struct file_operations cros_ec_console_log_fops = { .owner = THIS_MODULE, .open = cros_ec_console_log_open, .read = cros_ec_console_log_read, @@ -250,13 +279,20 @@ const struct file_operations cros_ec_console_log_fops = { .release = cros_ec_console_log_release, }; -const struct file_operations cros_ec_pdinfo_fops = { +static const struct file_operations cros_ec_pdinfo_fops = { .owner = THIS_MODULE, .open = simple_open, .read = cros_ec_pdinfo_read, .llseek = default_llseek, }; +static const struct file_operations cros_ec_uptime_fops = { + .owner = THIS_MODULE, + .open = simple_open, + .read = cros_ec_uptime_read, + .llseek = default_llseek, +}; + static int ec_read_version_supported(struct cros_ec_dev *ec) { struct ec_params_get_cmd_versions_v1 *params; @@ -408,6 +444,12 @@ static int cros_ec_debugfs_probe(struct platform_device *pd) debugfs_create_file("pdinfo", 0444, debug_info->dir, debug_info, &cros_ec_pdinfo_fops); + debugfs_create_file("uptime", 0444, debug_info->dir, debug_info, + &cros_ec_uptime_fops); + + debugfs_create_x32("last_resume_result", 0444, debug_info->dir, + &ec->ec_dev->last_resume_result); + ec->debug_info = debug_info; dev_set_drvdata(&pd->dev, ec); diff --git a/drivers/platform/chrome/cros_ec_ishtp.c b/drivers/platform/chrome/cros_ec_ishtp.c new file mode 100644 index 000000000000..e504d255d5ce --- /dev/null +++ b/drivers/platform/chrome/cros_ec_ishtp.c @@ -0,0 +1,763 @@ +// SPDX-License-Identifier: GPL-2.0 +// ISHTP interface for ChromeOS Embedded Controller +// +// Copyright (c) 2019, Intel Corporation. +// +// ISHTP client driver for talking to the Chrome OS EC firmware running +// on Intel Integrated Sensor Hub (ISH) using the ISH Transport protocol +// (ISH-TP). + +#include <linux/delay.h> +#include <linux/mfd/core.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/intel-ish-client-if.h> + +/* + * ISH TX/RX ring buffer pool size + * + * The AP->ISH messages and corresponding ISH->AP responses are + * serialized. We need 1 TX and 1 RX buffer for these. + * + * The MKBP ISH->AP events are serialized. We need one additional RX + * buffer for them. + */ +#define CROS_ISH_CL_TX_RING_SIZE 8 +#define CROS_ISH_CL_RX_RING_SIZE 8 + +/* ISH CrOS EC Host Commands */ +enum cros_ec_ish_channel { + CROS_EC_COMMAND = 1, /* AP->ISH message */ + CROS_MKBP_EVENT = 2, /* ISH->AP events */ +}; + +/* + * ISH firmware timeout for 1 message send failure is 1Hz, and the + * firmware will retry 2 times, so 3Hz is used for timeout. + */ +#define ISHTP_SEND_TIMEOUT (3 * HZ) + +/* ISH Transport CrOS EC ISH client unique GUID */ +static const guid_t cros_ish_guid = + GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc, + 0xb0, 0xd8, 0x9e, 0x7c, 0xda, 0xe0, 0xd6, 0xa0); + +struct header { + u8 channel; + u8 status; + u8 reserved[2]; +} __packed; + +struct cros_ish_out_msg { + struct header hdr; + struct ec_host_request ec_request; +} __packed; + +struct cros_ish_in_msg { + struct header hdr; + struct ec_host_response ec_response; +} __packed; + +#define IN_MSG_EC_RESPONSE_PREAMBLE \ + offsetof(struct cros_ish_in_msg, ec_response) + +#define OUT_MSG_EC_REQUEST_PREAMBLE \ + offsetof(struct cros_ish_out_msg, ec_request) + +#define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device) + +/* + * The Read-Write Semaphore is used to prevent message TX or RX while + * the ishtp client is being initialized or undergoing reset. + * + * The readers are the kernel function calls responsible for IA->ISH + * and ISH->AP messaging. + * + * The writers are .reset() and .probe() function. + */ +DECLARE_RWSEM(init_lock); + +/** + * struct response_info - Encapsulate firmware response related + * information for passing between function ish_send() and + * process_recv() callback. + * + * @data: Copy the data received from firmware here. + * @max_size: Max size allocated for the @data buffer. If the received + * data exceeds this value, we log an error. + * @size: Actual size of data received from firmware. + * @error: 0 for success, negative error code for a failure in process_recv(). + * @received: Set to true on receiving a valid firmware response to host command + * @wait_queue: Wait queue for host to wait for firmware response. + */ +struct response_info { + void *data; + size_t max_size; + size_t size; + int error; + bool received; + wait_queue_head_t wait_queue; +}; + +/** + * struct ishtp_cl_data - Encapsulate per ISH TP Client. + * + * @cros_ish_cl: ISHTP firmware client instance. + * @cl_device: ISHTP client device instance. + * @response: Response info passing between ish_send() and process_recv(). + * @work_ishtp_reset: Work queue reset handling. + * @work_ec_evt: Work queue for EC events. + * @ec_dev: CrOS EC MFD device. + * + * This structure is used to store per client data. + */ +struct ishtp_cl_data { + struct ishtp_cl *cros_ish_cl; + struct ishtp_cl_device *cl_device; + + /* + * Used for passing firmware response information between + * ish_send() and process_recv() callback. + */ + struct response_info response; + + struct work_struct work_ishtp_reset; + struct work_struct work_ec_evt; + struct cros_ec_device *ec_dev; +}; + +/** + * ish_evt_handler - ISH to AP event handler + * @work: Work struct + */ +static void ish_evt_handler(struct work_struct *work) +{ + struct ishtp_cl_data *client_data = + container_of(work, struct ishtp_cl_data, work_ec_evt); + struct cros_ec_device *ec_dev = client_data->ec_dev; + + if (cros_ec_get_next_event(ec_dev, NULL) > 0) { + blocking_notifier_call_chain(&ec_dev->event_notifier, + 0, ec_dev); + } +} + +/** + * ish_send() - Send message from host to firmware + * + * @client_data: Client data instance + * @out_msg: Message buffer to be sent to firmware + * @out_size: Size of out going message + * @in_msg: Message buffer where the incoming data is copied. This buffer + * is allocated by calling + * @in_size: Max size of incoming message + * + * Return: Number of bytes copied in the in_msg on success, negative + * error code on failure. + */ +static int ish_send(struct ishtp_cl_data *client_data, + u8 *out_msg, size_t out_size, + u8 *in_msg, size_t in_size) +{ + int rv; + struct header *out_hdr = (struct header *)out_msg; + struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl; + + dev_dbg(cl_data_to_dev(client_data), + "%s: channel=%02u status=%02u\n", + __func__, out_hdr->channel, out_hdr->status); + + /* Setup for incoming response */ + client_data->response.data = in_msg; + client_data->response.max_size = in_size; + client_data->response.error = 0; + client_data->response.received = false; + + rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size); + if (rv) { + dev_err(cl_data_to_dev(client_data), + "ishtp_cl_send error %d\n", rv); + return rv; + } + + wait_event_interruptible_timeout(client_data->response.wait_queue, + client_data->response.received, + ISHTP_SEND_TIMEOUT); + if (!client_data->response.received) { + dev_err(cl_data_to_dev(client_data), + "Timed out for response to host message\n"); + return -ETIMEDOUT; + } + + if (client_data->response.error < 0) + return client_data->response.error; + + return client_data->response.size; +} + +/** + * process_recv() - Received and parse incoming packet + * @cros_ish_cl: Client instance to get stats + * @rb_in_proc: Host interface message buffer + * + * Parse the incoming packet. If it is a response packet then it will + * update per instance flags and wake up the caller waiting to for the + * response. If it is an event packet then it will schedule event work. + */ +static void process_recv(struct ishtp_cl *cros_ish_cl, + struct ishtp_cl_rb *rb_in_proc) +{ + size_t data_len = rb_in_proc->buf_idx; + struct ishtp_cl_data *client_data = + ishtp_get_client_data(cros_ish_cl); + struct device *dev = cl_data_to_dev(client_data); + struct cros_ish_in_msg *in_msg = + (struct cros_ish_in_msg *)rb_in_proc->buffer.data; + + /* Proceed only if reset or init is not in progress */ + if (!down_read_trylock(&init_lock)) { + /* Free the buffer */ + ishtp_cl_io_rb_recycle(rb_in_proc); + dev_warn(dev, + "Host is not ready to receive incoming messages\n"); + return; + } + + /* + * All firmware messages contain a header. Check the buffer size + * before accessing elements inside. + */ + if (!rb_in_proc->buffer.data) { + dev_warn(dev, "rb_in_proc->buffer.data returned null"); + client_data->response.error = -EBADMSG; + goto end_error; + } + + if (data_len < sizeof(struct header)) { + dev_err(dev, "data size %zu is less than header %zu\n", + data_len, sizeof(struct header)); + client_data->response.error = -EMSGSIZE; + goto end_error; + } + + dev_dbg(dev, "channel=%02u status=%02u\n", + in_msg->hdr.channel, in_msg->hdr.status); + + switch (in_msg->hdr.channel) { + case CROS_EC_COMMAND: + /* Sanity check */ + if (!client_data->response.data) { + dev_err(dev, + "Receiving buffer is null. Should be allocated by calling function\n"); + client_data->response.error = -EINVAL; + goto error_wake_up; + } + + if (client_data->response.received) { + dev_err(dev, + "Previous firmware message not yet processed\n"); + client_data->response.error = -EINVAL; + goto error_wake_up; + } + + if (data_len > client_data->response.max_size) { + dev_err(dev, + "Received buffer size %zu is larger than allocated buffer %zu\n", + data_len, client_data->response.max_size); + client_data->response.error = -EMSGSIZE; + goto error_wake_up; + } + + if (in_msg->hdr.status) { + dev_err(dev, "firmware returned status %d\n", + in_msg->hdr.status); + client_data->response.error = -EIO; + goto error_wake_up; + } + + /* Update the actual received buffer size */ + client_data->response.size = data_len; + + /* + * Copy the buffer received in firmware response for the + * calling thread. + */ + memcpy(client_data->response.data, + rb_in_proc->buffer.data, data_len); + + /* Set flag before waking up the caller */ + client_data->response.received = true; +error_wake_up: + /* Wake the calling thread */ + wake_up_interruptible(&client_data->response.wait_queue); + + break; + + case CROS_MKBP_EVENT: + /* The event system doesn't send any data in buffer */ + schedule_work(&client_data->work_ec_evt); + + break; + + default: + dev_err(dev, "Invalid channel=%02d\n", in_msg->hdr.channel); + } + +end_error: + /* Free the buffer */ + ishtp_cl_io_rb_recycle(rb_in_proc); + + up_read(&init_lock); +} + +/** + * ish_event_cb() - bus driver callback for incoming message + * @cl_device: ISHTP client device for which this message is targeted. + * + * Remove the packet from the list and process the message by calling + * process_recv. + */ +static void ish_event_cb(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl_rb *rb_in_proc; + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); + + while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) { + /* Decide what to do with received data */ + process_recv(cros_ish_cl, rb_in_proc); + } +} + +/** + * cros_ish_init() - Init function for ISHTP client + * @cros_ish_cl: ISHTP client instance + * + * This function complete the initializtion of the client. + * + * Return: 0 for success, negative error code for failure. + */ +static int cros_ish_init(struct ishtp_cl *cros_ish_cl) +{ + int rv; + struct ishtp_device *dev; + struct ishtp_fw_client *fw_client; + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + + rv = ishtp_cl_link(cros_ish_cl); + if (rv) { + dev_err(cl_data_to_dev(client_data), + "ishtp_cl_link failed\n"); + return rv; + } + + dev = ishtp_get_ishtp_device(cros_ish_cl); + + /* Connect to firmware client */ + ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE); + ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE); + + fw_client = ishtp_fw_cl_get_client(dev, &cros_ish_guid); + if (!fw_client) { + dev_err(cl_data_to_dev(client_data), + "ish client uuid not found\n"); + rv = -ENOENT; + goto err_cl_unlink; + } + + ishtp_cl_set_fw_client_id(cros_ish_cl, + ishtp_get_fw_client_id(fw_client)); + ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING); + + rv = ishtp_cl_connect(cros_ish_cl); + if (rv) { + dev_err(cl_data_to_dev(client_data), + "client connect fail\n"); + goto err_cl_unlink; + } + + ishtp_register_event_cb(client_data->cl_device, ish_event_cb); + return 0; + +err_cl_unlink: + ishtp_cl_unlink(cros_ish_cl); + return rv; +} + +/** + * cros_ish_deinit() - Deinit function for ISHTP client + * @cros_ish_cl: ISHTP client instance + * + * Unlink and free cros_ec client + */ +static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl) +{ + ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING); + ishtp_cl_disconnect(cros_ish_cl); + ishtp_cl_unlink(cros_ish_cl); + ishtp_cl_flush_queues(cros_ish_cl); + + /* Disband and free all Tx and Rx client-level rings */ + ishtp_cl_free(cros_ish_cl); +} + +/** + * prepare_cros_ec_rx() - Check & prepare receive buffer + * @ec_dev: CrOS EC MFD device. + * @in_msg: Incoming message buffer + * @msg: cros_ec command used to send & receive data + * + * Return: 0 for success, negative error code for failure. + * + * Check the received buffer. Convert to cros_ec_command format. + */ +static int prepare_cros_ec_rx(struct cros_ec_device *ec_dev, + const struct cros_ish_in_msg *in_msg, + struct cros_ec_command *msg) +{ + u8 sum = 0; + int i, rv, offset; + + /* Check response error code */ + msg->result = in_msg->ec_response.result; + rv = cros_ec_check_result(ec_dev, msg); + if (rv < 0) + return rv; + + if (in_msg->ec_response.data_len > msg->insize) { + dev_err(ec_dev->dev, "Packet too long (%d bytes, expected %d)", + in_msg->ec_response.data_len, msg->insize); + return -ENOSPC; + } + + /* Copy response packet payload and compute checksum */ + for (i = 0; i < sizeof(struct ec_host_response); i++) + sum += ((u8 *)in_msg)[IN_MSG_EC_RESPONSE_PREAMBLE + i]; + + offset = sizeof(struct cros_ish_in_msg); + for (i = 0; i < in_msg->ec_response.data_len; i++) + sum += msg->data[i] = ((u8 *)in_msg)[offset + i]; + + if (sum) { + dev_dbg(ec_dev->dev, "Bad received packet checksum %d\n", sum); + return -EBADMSG; + } + + return 0; +} + +static int cros_ec_pkt_xfer_ish(struct cros_ec_device *ec_dev, + struct cros_ec_command *msg) +{ + int rv; + struct ishtp_cl *cros_ish_cl = ec_dev->priv; + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + struct device *dev = cl_data_to_dev(client_data); + struct cros_ish_in_msg *in_msg = (struct cros_ish_in_msg *)ec_dev->din; + struct cros_ish_out_msg *out_msg = + (struct cros_ish_out_msg *)ec_dev->dout; + size_t in_size = sizeof(struct cros_ish_in_msg) + msg->insize; + size_t out_size = sizeof(struct cros_ish_out_msg) + msg->outsize; + + /* Sanity checks */ + if (in_size > ec_dev->din_size) { + dev_err(dev, + "Incoming payload size %zu is too large for ec_dev->din_size %d\n", + in_size, ec_dev->din_size); + return -EMSGSIZE; + } + + if (out_size > ec_dev->dout_size) { + dev_err(dev, + "Outgoing payload size %zu is too large for ec_dev->dout_size %d\n", + out_size, ec_dev->dout_size); + return -EMSGSIZE; + } + + /* Proceed only if reset-init is not in progress */ + if (!down_read_trylock(&init_lock)) { + dev_warn(dev, + "Host is not ready to send messages to ISH. Try again\n"); + return -EAGAIN; + } + + /* Prepare the package to be sent over ISH TP */ + out_msg->hdr.channel = CROS_EC_COMMAND; + out_msg->hdr.status = 0; + + ec_dev->dout += OUT_MSG_EC_REQUEST_PREAMBLE; + cros_ec_prepare_tx(ec_dev, msg); + ec_dev->dout -= OUT_MSG_EC_REQUEST_PREAMBLE; + + dev_dbg(dev, + "out_msg: struct_ver=0x%x checksum=0x%x command=0x%x command_ver=0x%x data_len=0x%x\n", + out_msg->ec_request.struct_version, + out_msg->ec_request.checksum, + out_msg->ec_request.command, + out_msg->ec_request.command_version, + out_msg->ec_request.data_len); + + /* Send command to ISH EC firmware and read response */ + rv = ish_send(client_data, + (u8 *)out_msg, out_size, + (u8 *)in_msg, in_size); + if (rv < 0) + goto end_error; + + rv = prepare_cros_ec_rx(ec_dev, in_msg, msg); + if (rv) + goto end_error; + + rv = in_msg->ec_response.data_len; + + dev_dbg(dev, + "in_msg: struct_ver=0x%x checksum=0x%x result=0x%x data_len=0x%x\n", + in_msg->ec_response.struct_version, + in_msg->ec_response.checksum, + in_msg->ec_response.result, + in_msg->ec_response.data_len); + +end_error: + if (msg->command == EC_CMD_REBOOT_EC) + msleep(EC_REBOOT_DELAY_MS); + + up_read(&init_lock); + + return rv; +} + +static int cros_ec_dev_init(struct ishtp_cl_data *client_data) +{ + struct cros_ec_device *ec_dev; + struct device *dev = cl_data_to_dev(client_data); + + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL); + if (!ec_dev) + return -ENOMEM; + + client_data->ec_dev = ec_dev; + dev->driver_data = ec_dev; + + ec_dev->dev = dev; + ec_dev->priv = client_data->cros_ish_cl; + ec_dev->cmd_xfer = NULL; + ec_dev->pkt_xfer = cros_ec_pkt_xfer_ish; + ec_dev->phys_name = dev_name(dev); + ec_dev->din_size = sizeof(struct cros_ish_in_msg) + + sizeof(struct ec_response_get_protocol_info); + ec_dev->dout_size = sizeof(struct cros_ish_out_msg); + + return cros_ec_register(ec_dev); +} + +static void reset_handler(struct work_struct *work) +{ + int rv; + struct device *dev; + struct ishtp_cl *cros_ish_cl; + struct ishtp_cl_device *cl_device; + struct ishtp_cl_data *client_data = + container_of(work, struct ishtp_cl_data, work_ishtp_reset); + + /* Lock for reset to complete */ + down_write(&init_lock); + + cros_ish_cl = client_data->cros_ish_cl; + cl_device = client_data->cl_device; + + /* Unlink, flush queues & start again */ + ishtp_cl_unlink(cros_ish_cl); + ishtp_cl_flush_queues(cros_ish_cl); + ishtp_cl_free(cros_ish_cl); + + cros_ish_cl = ishtp_cl_allocate(cl_device); + if (!cros_ish_cl) { + up_write(&init_lock); + return; + } + + ishtp_set_drvdata(cl_device, cros_ish_cl); + ishtp_set_client_data(cros_ish_cl, client_data); + client_data->cros_ish_cl = cros_ish_cl; + + rv = cros_ish_init(cros_ish_cl); + if (rv) { + ishtp_cl_free(cros_ish_cl); + dev_err(cl_data_to_dev(client_data), "Reset Failed\n"); + up_write(&init_lock); + return; + } + + /* Refresh ec_dev device pointers */ + client_data->ec_dev->priv = client_data->cros_ish_cl; + dev = cl_data_to_dev(client_data); + dev->driver_data = client_data->ec_dev; + + dev_info(cl_data_to_dev(client_data), "Chrome EC ISH reset done\n"); + + up_write(&init_lock); +} + +/** + * cros_ec_ishtp_probe() - ISHTP client driver probe callback + * @cl_device: ISHTP client device instance + * + * Return: 0 for success, negative error code for failure. + */ +static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device) +{ + int rv; + struct ishtp_cl *cros_ish_cl; + struct ishtp_cl_data *client_data = + devm_kzalloc(ishtp_device(cl_device), + sizeof(*client_data), GFP_KERNEL); + if (!client_data) + return -ENOMEM; + + /* Lock for initialization to complete */ + down_write(&init_lock); + + cros_ish_cl = ishtp_cl_allocate(cl_device); + if (!cros_ish_cl) { + rv = -ENOMEM; + goto end_ishtp_cl_alloc_error; + } + + ishtp_set_drvdata(cl_device, cros_ish_cl); + ishtp_set_client_data(cros_ish_cl, client_data); + client_data->cros_ish_cl = cros_ish_cl; + client_data->cl_device = cl_device; + + init_waitqueue_head(&client_data->response.wait_queue); + + INIT_WORK(&client_data->work_ishtp_reset, + reset_handler); + INIT_WORK(&client_data->work_ec_evt, + ish_evt_handler); + + rv = cros_ish_init(cros_ish_cl); + if (rv) + goto end_ishtp_cl_init_error; + + ishtp_get_device(cl_device); + + up_write(&init_lock); + + /* Register croc_ec_dev mfd */ + rv = cros_ec_dev_init(client_data); + if (rv) + goto end_cros_ec_dev_init_error; + + return 0; + +end_cros_ec_dev_init_error: + ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING); + ishtp_cl_disconnect(cros_ish_cl); + ishtp_cl_unlink(cros_ish_cl); + ishtp_cl_flush_queues(cros_ish_cl); + ishtp_put_device(cl_device); +end_ishtp_cl_init_error: + ishtp_cl_free(cros_ish_cl); +end_ishtp_cl_alloc_error: + up_write(&init_lock); + return rv; +} + +/** + * cros_ec_ishtp_remove() - ISHTP client driver remove callback + * @cl_device: ISHTP client device instance + * + * Return: 0 + */ +static int cros_ec_ishtp_remove(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + + cancel_work_sync(&client_data->work_ishtp_reset); + cancel_work_sync(&client_data->work_ec_evt); + cros_ish_deinit(cros_ish_cl); + ishtp_put_device(cl_device); + + return 0; +} + +/** + * cros_ec_ishtp_reset() - ISHTP client driver reset callback + * @cl_device: ISHTP client device instance + * + * Return: 0 + */ +static int cros_ec_ishtp_reset(struct ishtp_cl_device *cl_device) +{ + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + + schedule_work(&client_data->work_ishtp_reset); + + return 0; +} + +/** + * cros_ec_ishtp_suspend() - ISHTP client driver suspend callback + * @device: device instance + * + * Return: 0 for success, negative error code for failure. + */ +static int __maybe_unused cros_ec_ishtp_suspend(struct device *device) +{ + struct ishtp_cl_device *cl_device = dev_get_drvdata(device); + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + + return cros_ec_suspend(client_data->ec_dev); +} + +/** + * cros_ec_ishtp_resume() - ISHTP client driver resume callback + * @device: device instance + * + * Return: 0 for success, negative error code for failure. + */ +static int __maybe_unused cros_ec_ishtp_resume(struct device *device) +{ + struct ishtp_cl_device *cl_device = dev_get_drvdata(device); + struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device); + struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl); + + return cros_ec_resume(client_data->ec_dev); +} + +static SIMPLE_DEV_PM_OPS(cros_ec_ishtp_pm_ops, cros_ec_ishtp_suspend, + cros_ec_ishtp_resume); + +static struct ishtp_cl_driver cros_ec_ishtp_driver = { + .name = "cros_ec_ishtp", + .guid = &cros_ish_guid, + .probe = cros_ec_ishtp_probe, + .remove = cros_ec_ishtp_remove, + .reset = cros_ec_ishtp_reset, + .driver = { + .pm = &cros_ec_ishtp_pm_ops, + }, +}; + +static int __init cros_ec_ishtp_mod_init(void) +{ + return ishtp_cl_driver_register(&cros_ec_ishtp_driver, THIS_MODULE); +} + +static void __exit cros_ec_ishtp_mod_exit(void) +{ + ishtp_cl_driver_unregister(&cros_ec_ishtp_driver); +} + +module_init(cros_ec_ishtp_mod_init); +module_exit(cros_ec_ishtp_mod_exit); + +MODULE_DESCRIPTION("ChromeOS EC ISHTP Client Driver"); +MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@intel.com>"); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("ishtp:*"); diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c index d30a6650b0b5..609598bbb6c3 100644 --- a/drivers/platform/chrome/cros_ec_lightbar.c +++ b/drivers/platform/chrome/cros_ec_lightbar.c @@ -547,7 +547,7 @@ static struct attribute *__lb_cmds_attrs[] = { NULL, }; -struct attribute_group cros_ec_lightbar_attr_group = { +static struct attribute_group cros_ec_lightbar_attr_group = { .name = "lightbar", .attrs = __lb_cmds_attrs, }; @@ -600,7 +600,7 @@ static int cros_ec_lightbar_remove(struct platform_device *pd) static int __maybe_unused cros_ec_lightbar_resume(struct device *dev) { - struct cros_ec_dev *ec_dev = dev_get_drvdata(dev); + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent); if (userspace_control) return 0; @@ -610,7 +610,7 @@ static int __maybe_unused cros_ec_lightbar_resume(struct device *dev) static int __maybe_unused cros_ec_lightbar_suspend(struct device *dev) { - struct cros_ec_dev *ec_dev = dev_get_drvdata(dev); + struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent); if (userspace_control) return 0; diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c index c9c240fbe7c6..2c44c7f3322a 100644 --- a/drivers/platform/chrome/cros_ec_lpc.c +++ b/drivers/platform/chrome/cros_ec_lpc.c @@ -23,7 +23,7 @@ #include <linux/printk.h> #include <linux/suspend.h> -#include "cros_ec_lpc_reg.h" +#include "cros_ec_lpc_mec.h" #define DRV_NAME "cros_ec_lpcs" #define ACPI_DRV_NAME "GOOG0004" @@ -31,6 +31,96 @@ /* True if ACPI device is present */ static bool cros_ec_lpc_acpi_device_found; +/** + * struct lpc_driver_ops - LPC driver operations + * @read: Copy length bytes from EC address offset into buffer dest. Returns + * the 8-bit checksum of all bytes read. + * @write: Copy length bytes from buffer msg into EC address offset. Returns + * the 8-bit checksum of all bytes written. + */ +struct lpc_driver_ops { + u8 (*read)(unsigned int offset, unsigned int length, u8 *dest); + u8 (*write)(unsigned int offset, unsigned int length, const u8 *msg); +}; + +static struct lpc_driver_ops cros_ec_lpc_ops = { }; + +/* + * A generic instance of the read function of struct lpc_driver_ops, used for + * the LPC EC. + */ +static u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, + u8 *dest) +{ + int sum = 0; + int i; + + for (i = 0; i < length; ++i) { + dest[i] = inb(offset + i); + sum += dest[i]; + } + + /* Return checksum of all bytes read */ + return sum; +} + +/* + * A generic instance of the write function of struct lpc_driver_ops, used for + * the LPC EC. + */ +static u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, + const u8 *msg) +{ + int sum = 0; + int i; + + for (i = 0; i < length; ++i) { + outb(msg[i], offset + i); + sum += msg[i]; + } + + /* Return checksum of all bytes written */ + return sum; +} + +/* + * An instance of the read function of struct lpc_driver_ops, used for the + * MEC variant of LPC EC. + */ +static u8 cros_ec_lpc_mec_read_bytes(unsigned int offset, unsigned int length, + u8 *dest) +{ + int in_range = cros_ec_lpc_mec_in_range(offset, length); + + if (in_range < 0) + return 0; + + return in_range ? + cros_ec_lpc_io_bytes_mec(MEC_IO_READ, + offset - EC_HOST_CMD_REGION0, + length, dest) : + cros_ec_lpc_read_bytes(offset, length, dest); +} + +/* + * An instance of the write function of struct lpc_driver_ops, used for the + * MEC variant of LPC EC. + */ +static u8 cros_ec_lpc_mec_write_bytes(unsigned int offset, unsigned int length, + const u8 *msg) +{ + int in_range = cros_ec_lpc_mec_in_range(offset, length); + + if (in_range < 0) + return 0; + + return in_range ? + cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, + offset - EC_HOST_CMD_REGION0, + length, (u8 *)msg) : + cros_ec_lpc_write_bytes(offset, length, msg); +} + static int ec_response_timed_out(void) { unsigned long one_second = jiffies + HZ; @@ -38,7 +128,7 @@ static int ec_response_timed_out(void) usleep_range(200, 300); do { - if (!(cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_CMD, 1, &data) & + if (!(cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_CMD, 1, &data) & EC_LPC_STATUS_BUSY_MASK)) return 0; usleep_range(100, 200); @@ -58,11 +148,11 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec, ret = cros_ec_prepare_tx(ec, msg); /* Write buffer */ - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout); + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PACKET, ret, ec->dout); /* Here we go */ sum = EC_COMMAND_PROTOCOL_3; - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum); + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum); if (ec_response_timed_out()) { dev_warn(ec->dev, "EC responsed timed out\n"); @@ -71,15 +161,15 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec, } /* Check result */ - msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum); + msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum); ret = cros_ec_check_result(ec, msg); if (ret) goto done; /* Read back response */ dout = (u8 *)&response; - sum = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET, sizeof(response), - dout); + sum = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET, sizeof(response), + dout); msg->result = response.result; @@ -92,9 +182,9 @@ static int cros_ec_pkt_xfer_lpc(struct cros_ec_device *ec, } /* Read response and process checksum */ - sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PACKET + - sizeof(response), response.data_len, - msg->data); + sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PACKET + + sizeof(response), response.data_len, + msg->data); if (sum) { dev_err(ec->dev, @@ -134,17 +224,17 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec, sum = msg->command + args.flags + args.command_version + args.data_size; /* Copy data and update checksum */ - sum += cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_PARAM, msg->outsize, - msg->data); + sum += cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_PARAM, msg->outsize, + msg->data); /* Finalize checksum and write args */ args.checksum = sum; - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args), - (u8 *)&args); + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_ARGS, sizeof(args), + (u8 *)&args); /* Here we go */ sum = msg->command; - cros_ec_lpc_write_bytes(EC_LPC_ADDR_HOST_CMD, 1, &sum); + cros_ec_lpc_ops.write(EC_LPC_ADDR_HOST_CMD, 1, &sum); if (ec_response_timed_out()) { dev_warn(ec->dev, "EC responsed timed out\n"); @@ -153,14 +243,13 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec, } /* Check result */ - msg->result = cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_DATA, 1, &sum); + msg->result = cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_DATA, 1, &sum); ret = cros_ec_check_result(ec, msg); if (ret) goto done; /* Read back args */ - cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_ARGS, sizeof(args), - (u8 *)&args); + cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_ARGS, sizeof(args), (u8 *)&args); if (args.data_size > msg->insize) { dev_err(ec->dev, @@ -174,8 +263,8 @@ static int cros_ec_cmd_xfer_lpc(struct cros_ec_device *ec, sum = msg->command + args.flags + args.command_version + args.data_size; /* Read response and update checksum */ - sum += cros_ec_lpc_read_bytes(EC_LPC_ADDR_HOST_PARAM, args.data_size, - msg->data); + sum += cros_ec_lpc_ops.read(EC_LPC_ADDR_HOST_PARAM, args.data_size, + msg->data); /* Verify checksum */ if (args.checksum != sum) { @@ -205,13 +294,13 @@ static int cros_ec_lpc_readmem(struct cros_ec_device *ec, unsigned int offset, /* fixed length */ if (bytes) { - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + offset, bytes, s); + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + offset, bytes, s); return bytes; } /* string */ for (; i < EC_MEMMAP_SIZE; i++, s++) { - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + i, 1, s); + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + i, 1, s); cnt++; if (!*s) break; @@ -248,10 +337,25 @@ static int cros_ec_lpc_probe(struct platform_device *pdev) return -EBUSY; } - cros_ec_lpc_read_bytes(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf); + /* + * Read the mapped ID twice, the first one is assuming the + * EC is a Microchip Embedded Controller (MEC) variant, if the + * protocol fails, fallback to the non MEC variant and try to + * read again the ID. + */ + cros_ec_lpc_ops.read = cros_ec_lpc_mec_read_bytes; + cros_ec_lpc_ops.write = cros_ec_lpc_mec_write_bytes; + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, buf); if (buf[0] != 'E' || buf[1] != 'C') { - dev_err(dev, "EC ID not detected\n"); - return -ENODEV; + /* Re-assign read/write operations for the non MEC variant */ + cros_ec_lpc_ops.read = cros_ec_lpc_read_bytes; + cros_ec_lpc_ops.write = cros_ec_lpc_write_bytes; + cros_ec_lpc_ops.read(EC_LPC_ADDR_MEMMAP + EC_MEMMAP_ID, 2, + buf); + if (buf[0] != 'E' || buf[1] != 'C') { + dev_err(dev, "EC ID not detected\n"); + return -ENODEV; + } } if (!devm_request_region(dev, EC_HOST_CMD_REGION0, @@ -405,7 +509,7 @@ static int cros_ec_lpc_resume(struct device *dev) } #endif -const struct dev_pm_ops cros_ec_lpc_pm_ops = { +static const struct dev_pm_ops cros_ec_lpc_pm_ops = { SET_LATE_SYSTEM_SLEEP_PM_OPS(cros_ec_lpc_suspend, cros_ec_lpc_resume) }; @@ -446,13 +550,14 @@ static int __init cros_ec_lpc_init(void) return -ENODEV; } - cros_ec_lpc_reg_init(); + cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0, + EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE); /* Register the driver */ ret = platform_driver_register(&cros_ec_lpc_driver); if (ret) { pr_err(DRV_NAME ": can't register driver: %d\n", ret); - cros_ec_lpc_reg_destroy(); + cros_ec_lpc_mec_destroy(); return ret; } @@ -462,7 +567,7 @@ static int __init cros_ec_lpc_init(void) if (ret) { pr_err(DRV_NAME ": can't register device: %d\n", ret); platform_driver_unregister(&cros_ec_lpc_driver); - cros_ec_lpc_reg_destroy(); + cros_ec_lpc_mec_destroy(); } } @@ -474,7 +579,7 @@ static void __exit cros_ec_lpc_exit(void) if (!cros_ec_lpc_acpi_device_found) platform_device_unregister(&cros_ec_lpc_device); platform_driver_unregister(&cros_ec_lpc_driver); - cros_ec_lpc_reg_destroy(); + cros_ec_lpc_mec_destroy(); } module_init(cros_ec_lpc_init); diff --git a/drivers/platform/chrome/cros_ec_lpc_mec.c b/drivers/platform/chrome/cros_ec_lpc_mec.c index d8890bafb55d..9035b17e8c86 100644 --- a/drivers/platform/chrome/cros_ec_lpc_mec.c +++ b/drivers/platform/chrome/cros_ec_lpc_mec.c @@ -17,12 +17,10 @@ static struct mutex io_mutex; static u16 mec_emi_base, mec_emi_end; -/* - * cros_ec_lpc_mec_emi_write_address - * - * Initialize EMI read / write at a given address. +/** + * cros_ec_lpc_mec_emi_write_address() - Initialize EMI at a given address. * - * @addr: Starting read / write address + * @addr: Starting read / write address * @access_type: Type of access, typically 32-bit auto-increment */ static void cros_ec_lpc_mec_emi_write_address(u16 addr, @@ -61,15 +59,15 @@ int cros_ec_lpc_mec_in_range(unsigned int offset, unsigned int length) return 0; } -/* - * cros_ec_lpc_io_bytes_mec - Read / write bytes to MEC EMI port +/** + * cros_ec_lpc_io_bytes_mec() - Read / write bytes to MEC EMI port. * * @io_type: MEC_IO_READ or MEC_IO_WRITE, depending on request * @offset: Base read / write address * @length: Number of bytes to read / write * @buf: Destination / source buffer * - * @return 8-bit checksum of all bytes read / written + * Return: 8-bit checksum of all bytes read / written */ u8 cros_ec_lpc_io_bytes_mec(enum cros_ec_lpc_mec_io_type io_type, unsigned int offset, unsigned int length, diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c deleted file mode 100644 index 0f5cd0ac8b49..000000000000 --- a/drivers/platform/chrome/cros_ec_lpc_reg.c +++ /dev/null @@ -1,101 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -// LPC interface for ChromeOS Embedded Controller -// -// Copyright (C) 2016 Google, Inc - -#include <linux/io.h> -#include <linux/mfd/cros_ec.h> -#include <linux/mfd/cros_ec_commands.h> - -#include "cros_ec_lpc_mec.h" - -static u8 lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest) -{ - int i; - int sum = 0; - - for (i = 0; i < length; ++i) { - dest[i] = inb(offset + i); - sum += dest[i]; - } - - /* Return checksum of all bytes read */ - return sum; -} - -static u8 lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg) -{ - int i; - int sum = 0; - - for (i = 0; i < length; ++i) { - outb(msg[i], offset + i); - sum += msg[i]; - } - - /* Return checksum of all bytes written */ - return sum; -} - -#ifdef CONFIG_CROS_EC_LPC_MEC - -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest) -{ - int in_range = cros_ec_lpc_mec_in_range(offset, length); - - if (in_range < 0) - return 0; - - return in_range ? - cros_ec_lpc_io_bytes_mec(MEC_IO_READ, - offset - EC_HOST_CMD_REGION0, - length, dest) : - lpc_read_bytes(offset, length, dest); -} - -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg) -{ - int in_range = cros_ec_lpc_mec_in_range(offset, length); - - if (in_range < 0) - return 0; - - return in_range ? - cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, - offset - EC_HOST_CMD_REGION0, - length, msg) : - lpc_write_bytes(offset, length, msg); -} - -void cros_ec_lpc_reg_init(void) -{ - cros_ec_lpc_mec_init(EC_HOST_CMD_REGION0, - EC_LPC_ADDR_MEMMAP + EC_MEMMAP_SIZE); -} - -void cros_ec_lpc_reg_destroy(void) -{ - cros_ec_lpc_mec_destroy(); -} - -#else /* CONFIG_CROS_EC_LPC_MEC */ - -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest) -{ - return lpc_read_bytes(offset, length, dest); -} - -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg) -{ - return lpc_write_bytes(offset, length, msg); -} - -void cros_ec_lpc_reg_init(void) -{ -} - -void cros_ec_lpc_reg_destroy(void) -{ -} - -#endif /* CONFIG_CROS_EC_LPC_MEC */ diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.h b/drivers/platform/chrome/cros_ec_lpc_reg.h deleted file mode 100644 index 416fd2572182..000000000000 --- a/drivers/platform/chrome/cros_ec_lpc_reg.h +++ /dev/null @@ -1,45 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * LPC interface for ChromeOS Embedded Controller - * - * Copyright (C) 2016 Google, Inc - */ - -#ifndef __CROS_EC_LPC_REG_H -#define __CROS_EC_LPC_REG_H - -/** - * cros_ec_lpc_read_bytes - Read bytes from a given LPC-mapped address. - * Returns 8-bit checksum of all bytes read. - * - * @offset: Base read address - * @length: Number of bytes to read - * @dest: Destination buffer - */ -u8 cros_ec_lpc_read_bytes(unsigned int offset, unsigned int length, u8 *dest); - -/** - * cros_ec_lpc_write_bytes - Write bytes to a given LPC-mapped address. - * Returns 8-bit checksum of all bytes written. - * - * @offset: Base write address - * @length: Number of bytes to write - * @msg: Write data buffer - */ -u8 cros_ec_lpc_write_bytes(unsigned int offset, unsigned int length, u8 *msg); - -/** - * cros_ec_lpc_reg_init - * - * Initialize register I/O. - */ -void cros_ec_lpc_reg_init(void); - -/** - * cros_ec_lpc_reg_destroy - * - * Cleanup reg I/O. - */ -void cros_ec_lpc_reg_destroy(void); - -#endif /* __CROS_EC_LPC_REG_H */ diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c index 8e9451720e73..006a8ff64057 100644 --- a/drivers/platform/chrome/cros_ec_spi.c +++ b/drivers/platform/chrome/cros_ec_spi.c @@ -12,7 +12,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/spi/spi.h> - +#include <uapi/linux/sched/types.h> /* The header byte, which follows the preamble */ #define EC_MSG_HEADER 0xec @@ -67,12 +67,14 @@ * is sent when we want to turn on CS at the start of a transaction. * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that * is sent when we want to turn off CS at the end of a transaction. + * @high_pri_worker: Used to schedule high priority work. */ struct cros_ec_spi { struct spi_device *spi; s64 last_transfer_ns; unsigned int start_of_msg_delay; unsigned int end_of_msg_delay; + struct kthread_worker *high_pri_worker; }; typedef int (*cros_ec_xfer_fn_t) (struct cros_ec_device *ec_dev, @@ -89,7 +91,7 @@ typedef int (*cros_ec_xfer_fn_t) (struct cros_ec_device *ec_dev, */ struct cros_ec_xfer_work_params { - struct work_struct work; + struct kthread_work work; cros_ec_xfer_fn_t fn; struct cros_ec_device *ec_dev; struct cros_ec_command *ec_msg; @@ -632,7 +634,7 @@ exit: return ret; } -static void cros_ec_xfer_high_pri_work(struct work_struct *work) +static void cros_ec_xfer_high_pri_work(struct kthread_work *work) { struct cros_ec_xfer_work_params *params; @@ -644,12 +646,14 @@ static int cros_ec_xfer_high_pri(struct cros_ec_device *ec_dev, struct cros_ec_command *ec_msg, cros_ec_xfer_fn_t fn) { - struct cros_ec_xfer_work_params params; - - INIT_WORK_ONSTACK(¶ms.work, cros_ec_xfer_high_pri_work); - params.ec_dev = ec_dev; - params.ec_msg = ec_msg; - params.fn = fn; + struct cros_ec_spi *ec_spi = ec_dev->priv; + struct cros_ec_xfer_work_params params = { + .work = KTHREAD_WORK_INIT(params.work, + cros_ec_xfer_high_pri_work), + .ec_dev = ec_dev, + .ec_msg = ec_msg, + .fn = fn, + }; /* * This looks a bit ridiculous. Why do the work on a @@ -660,9 +664,8 @@ static int cros_ec_xfer_high_pri(struct cros_ec_device *ec_dev, * context switched out for too long and the EC giving up on * the transfer. */ - queue_work(system_highpri_wq, ¶ms.work); - flush_work(¶ms.work); - destroy_work_on_stack(¶ms.work); + kthread_queue_work(ec_spi->high_pri_worker, ¶ms.work); + kthread_flush_work(¶ms.work); return params.ret; } @@ -694,6 +697,40 @@ static void cros_ec_spi_dt_probe(struct cros_ec_spi *ec_spi, struct device *dev) ec_spi->end_of_msg_delay = val; } +static void cros_ec_spi_high_pri_release(void *worker) +{ + kthread_destroy_worker(worker); +} + +static int cros_ec_spi_devm_high_pri_alloc(struct device *dev, + struct cros_ec_spi *ec_spi) +{ + struct sched_param sched_priority = { + .sched_priority = MAX_RT_PRIO - 1, + }; + int err; + + ec_spi->high_pri_worker = + kthread_create_worker(0, "cros_ec_spi_high_pri"); + + if (IS_ERR(ec_spi->high_pri_worker)) { + err = PTR_ERR(ec_spi->high_pri_worker); + dev_err(dev, "Can't create cros_ec high pri worker: %d\n", err); + return err; + } + + err = devm_add_action_or_reset(dev, cros_ec_spi_high_pri_release, + ec_spi->high_pri_worker); + if (err) + return err; + + err = sched_setscheduler_nocheck(ec_spi->high_pri_worker->task, + SCHED_FIFO, &sched_priority); + if (err) + dev_err(dev, "Can't set cros_ec high pri priority: %d\n", err); + return err; +} + static int cros_ec_spi_probe(struct spi_device *spi) { struct device *dev = &spi->dev; @@ -703,6 +740,7 @@ static int cros_ec_spi_probe(struct spi_device *spi) spi->bits_per_word = 8; spi->mode = SPI_MODE_0; + spi->rt = true; err = spi_setup(spi); if (err < 0) return err; @@ -732,6 +770,10 @@ static int cros_ec_spi_probe(struct spi_device *spi) ec_spi->last_transfer_ns = ktime_get_ns(); + err = cros_ec_spi_devm_high_pri_alloc(dev, ec_spi); + if (err) + return err; + err = cros_ec_register(ec_dev); if (err) { dev_err(dev, "cannot register EC\n"); @@ -777,7 +819,7 @@ MODULE_DEVICE_TABLE(spi, cros_ec_spi_id); static struct spi_driver cros_ec_driver_spi = { .driver = { .name = "cros-ec-spi", - .of_match_table = of_match_ptr(cros_ec_spi_of_match), + .of_match_table = cros_ec_spi_of_match, .pm = &cros_ec_spi_pm_ops, }, .probe = cros_ec_spi_probe, diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c index fe0b7614ae1b..3edb237bf8ed 100644 --- a/drivers/platform/chrome/cros_ec_sysfs.c +++ b/drivers/platform/chrome/cros_ec_sysfs.c @@ -335,7 +335,7 @@ static umode_t cros_ec_ctrl_visible(struct kobject *kobj, return a->mode; } -struct attribute_group cros_ec_attr_group = { +static struct attribute_group cros_ec_attr_group = { .attrs = __ec_attrs, .is_visible = cros_ec_ctrl_visible, }; diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c index 8392a1ec33a7..2aaefed87eb4 100644 --- a/drivers/platform/chrome/cros_ec_vbc.c +++ b/drivers/platform/chrome/cros_ec_vbc.c @@ -101,7 +101,7 @@ static struct bin_attribute *cros_ec_vbc_bin_attrs[] = { NULL }; -struct attribute_group cros_ec_vbc_attr_group = { +static struct attribute_group cros_ec_vbc_attr_group = { .name = "vbc", .bin_attrs = cros_ec_vbc_bin_attrs, }; diff --git a/drivers/platform/chrome/wilco_ec/Kconfig b/drivers/platform/chrome/wilco_ec/Kconfig index fd29cbfd3d5d..89007b0bc743 100644 --- a/drivers/platform/chrome/wilco_ec/Kconfig +++ b/drivers/platform/chrome/wilco_ec/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config WILCO_EC tristate "ChromeOS Wilco Embedded Controller" - depends on ACPI && X86 && CROS_EC_LPC && CROS_EC_LPC_MEC + depends on ACPI && X86 && CROS_EC_LPC help If you say Y here, you get support for talking to the ChromeOS Wilco EC over an eSPI bus. This uses a simple byte-level protocol @@ -19,3 +19,19 @@ config WILCO_EC_DEBUGFS manipulation and allow for testing arbitrary commands. This interface is intended for debug only and will not be present on production devices. + +config WILCO_EC_EVENTS + tristate "Enable event forwarding from EC to userspace" + depends on WILCO_EC + help + If you say Y here, you get support for the EC to send events + (such as power state changes) to userspace. The EC sends the events + over ACPI, and a driver queues up the events to be read by a + userspace daemon from /dev/wilco_event using read() and poll(). + +config WILCO_EC_TELEMETRY + tristate "Enable querying telemetry data from EC" + depends on WILCO_EC + help + If you say Y here, you get support to query EC telemetry data from + /dev/wilco_telem0 using write() and then read(). diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile index 063e7fb4ea17..bc817164596e 100644 --- a/drivers/platform/chrome/wilco_ec/Makefile +++ b/drivers/platform/chrome/wilco_ec/Makefile @@ -1,6 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 -wilco_ec-objs := core.o mailbox.o +wilco_ec-objs := core.o mailbox.o properties.o sysfs.o obj-$(CONFIG_WILCO_EC) += wilco_ec.o wilco_ec_debugfs-objs := debugfs.o obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o +wilco_ec_events-objs := event.o +obj-$(CONFIG_WILCO_EC_EVENTS) += wilco_ec_events.o +wilco_ec_telem-objs := telemetry.o +obj-$(CONFIG_WILCO_EC_TELEMETRY) += wilco_ec_telem.o diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c index 05e1e2be1c91..3724bf4b77c6 100644 --- a/drivers/platform/chrome/wilco_ec/core.c +++ b/drivers/platform/chrome/wilco_ec/core.c @@ -52,9 +52,7 @@ static int wilco_ec_probe(struct platform_device *pdev) ec->dev = dev; mutex_init(&ec->mailbox_lock); - /* Largest data buffer size requirement is extended data response */ - ec->data_size = sizeof(struct wilco_ec_response) + - EC_MAILBOX_DATA_SIZE_EXTENDED; + ec->data_size = sizeof(struct wilco_ec_response) + EC_MAILBOX_DATA_SIZE; ec->data_buffer = devm_kzalloc(dev, ec->data_size, GFP_KERNEL); if (!ec->data_buffer) return -ENOMEM; @@ -89,8 +87,28 @@ static int wilco_ec_probe(struct platform_device *pdev) goto unregister_debugfs; } + ret = wilco_ec_add_sysfs(ec); + if (ret < 0) { + dev_err(dev, "Failed to create sysfs entries: %d", ret); + goto unregister_rtc; + } + + /* Register child device that will be found by the telemetry driver. */ + ec->telem_pdev = platform_device_register_data(dev, "wilco_telem", + PLATFORM_DEVID_AUTO, + ec, sizeof(*ec)); + if (IS_ERR(ec->telem_pdev)) { + dev_err(dev, "Failed to create telemetry platform device\n"); + ret = PTR_ERR(ec->telem_pdev); + goto remove_sysfs; + } + return 0; +remove_sysfs: + wilco_ec_remove_sysfs(ec); +unregister_rtc: + platform_device_unregister(ec->rtc_pdev); unregister_debugfs: if (ec->debugfs_pdev) platform_device_unregister(ec->debugfs_pdev); @@ -102,6 +120,8 @@ static int wilco_ec_remove(struct platform_device *pdev) { struct wilco_ec_device *ec = platform_get_drvdata(pdev); + wilco_ec_remove_sysfs(ec); + platform_device_unregister(ec->telem_pdev); platform_device_unregister(ec->rtc_pdev); if (ec->debugfs_pdev) platform_device_unregister(ec->debugfs_pdev); diff --git a/drivers/platform/chrome/wilco_ec/debugfs.c b/drivers/platform/chrome/wilco_ec/debugfs.c index f163476d080d..8d65a1e2f1a3 100644 --- a/drivers/platform/chrome/wilco_ec/debugfs.c +++ b/drivers/platform/chrome/wilco_ec/debugfs.c @@ -16,14 +16,14 @@ #define DRV_NAME "wilco-ec-debugfs" -/* The 256 raw bytes will take up more space when represented as a hex string */ -#define FORMATTED_BUFFER_SIZE (EC_MAILBOX_DATA_SIZE_EXTENDED * 4) +/* The raw bytes will take up more space when represented as a hex string */ +#define FORMATTED_BUFFER_SIZE (EC_MAILBOX_DATA_SIZE * 4) struct wilco_ec_debugfs { struct wilco_ec_device *ec; struct dentry *dir; size_t response_size; - u8 raw_data[EC_MAILBOX_DATA_SIZE_EXTENDED]; + u8 raw_data[EC_MAILBOX_DATA_SIZE]; u8 formatted_data[FORMATTED_BUFFER_SIZE]; }; static struct wilco_ec_debugfs *debug_info; @@ -124,12 +124,6 @@ static ssize_t raw_write(struct file *file, const char __user *user_buf, msg.response_data = debug_info->raw_data; msg.response_size = EC_MAILBOX_DATA_SIZE; - /* Telemetry commands use extended response data */ - if (msg.type == WILCO_EC_MSG_TELEMETRY_LONG) { - msg.flags |= WILCO_EC_FLAG_EXTENDED_DATA; - msg.response_size = EC_MAILBOX_DATA_SIZE_EXTENDED; - } - ret = wilco_ec_mailbox(debug_info->ec, &msg); if (ret < 0) return ret; diff --git a/drivers/platform/chrome/wilco_ec/event.c b/drivers/platform/chrome/wilco_ec/event.c new file mode 100644 index 000000000000..dba3d445623f --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/event.c @@ -0,0 +1,581 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ACPI event handling for Wilco Embedded Controller + * + * Copyright 2019 Google LLC + * + * The Wilco Embedded Controller can create custom events that + * are not handled as standard ACPI objects. These events can + * contain information about changes in EC controlled features, + * such as errors and events in the dock or display. For example, + * an event is triggered if the dock is plugged into a display + * incorrectly. These events are needed for telemetry and + * diagnostics reasons, and for possibly alerting the user. + + * These events are triggered by the EC with an ACPI Notify(0x90), + * and then the BIOS reads the event buffer from EC RAM via an + * ACPI method. When the OS receives these events via ACPI, + * it passes them along to this driver. The events are put into + * a queue which can be read by a userspace daemon via a char device + * that implements read() and poll(). The event queue acts as a + * circular buffer of size 64, so if there are no userspace consumers + * the kernel will not run out of memory. The char device will appear at + * /dev/wilco_event{n}, where n is some small non-negative integer, + * starting from 0. Standard ACPI events such as the battery getting + * plugged/unplugged can also come through this path, but they are + * dealt with via other paths, and are ignored here. + + * To test, you can tail the binary data with + * $ cat /dev/wilco_event0 | hexdump -ve '1/1 "%x\n"' + * and then create an event by plugging/unplugging the battery. + */ + +#include <linux/acpi.h> +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/idr.h> +#include <linux/io.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/poll.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/wait.h> + +/* ACPI Notify event code indicating event data is available. */ +#define EC_ACPI_NOTIFY_EVENT 0x90 +/* ACPI Method to execute to retrieve event data buffer from the EC. */ +#define EC_ACPI_GET_EVENT "QSET" +/* Maximum number of words in event data returned by the EC. */ +#define EC_ACPI_MAX_EVENT_WORDS 6 +#define EC_ACPI_MAX_EVENT_SIZE \ + (sizeof(struct ec_event) + (EC_ACPI_MAX_EVENT_WORDS) * sizeof(u16)) + +/* Node will appear in /dev/EVENT_DEV_NAME */ +#define EVENT_DEV_NAME "wilco_event" +#define EVENT_CLASS_NAME EVENT_DEV_NAME +#define DRV_NAME EVENT_DEV_NAME +#define EVENT_DEV_NAME_FMT (EVENT_DEV_NAME "%d") +static struct class event_class = { + .owner = THIS_MODULE, + .name = EVENT_CLASS_NAME, +}; + +/* Keep track of all the device numbers used. */ +#define EVENT_MAX_DEV 128 +static int event_major; +static DEFINE_IDA(event_ida); + +/* Size of circular queue of events. */ +#define MAX_NUM_EVENTS 64 + +/** + * struct ec_event - Extended event returned by the EC. + * @size: Number of 16bit words in structure after the size word. + * @type: Extended event type, meaningless for us. + * @event: Event data words. Max count is %EC_ACPI_MAX_EVENT_WORDS. + */ +struct ec_event { + u16 size; + u16 type; + u16 event[0]; +} __packed; + +#define ec_event_num_words(ev) (ev->size - 1) +#define ec_event_size(ev) (sizeof(*ev) + (ec_event_num_words(ev) * sizeof(u16))) + +/** + * struct ec_event_queue - Circular queue for events. + * @capacity: Number of elements the queue can hold. + * @head: Next index to write to. + * @tail: Next index to read from. + * @entries: Array of events. + */ +struct ec_event_queue { + int capacity; + int head; + int tail; + struct ec_event *entries[0]; +}; + +/* Maximum number of events to store in ec_event_queue */ +static int queue_size = 64; +module_param(queue_size, int, 0644); + +static struct ec_event_queue *event_queue_new(int capacity) +{ + struct ec_event_queue *q; + + q = kzalloc(struct_size(q, entries, capacity), GFP_KERNEL); + if (!q) + return NULL; + + q->capacity = capacity; + + return q; +} + +static inline bool event_queue_empty(struct ec_event_queue *q) +{ + /* head==tail when both full and empty, but head==NULL when empty */ + return q->head == q->tail && !q->entries[q->head]; +} + +static inline bool event_queue_full(struct ec_event_queue *q) +{ + /* head==tail when both full and empty, but head!=NULL when full */ + return q->head == q->tail && q->entries[q->head]; +} + +static struct ec_event *event_queue_pop(struct ec_event_queue *q) +{ + struct ec_event *ev; + + if (event_queue_empty(q)) + return NULL; + + ev = q->entries[q->tail]; + q->entries[q->tail] = NULL; + q->tail = (q->tail + 1) % q->capacity; + + return ev; +} + +/* + * If full, overwrite the oldest event and return it so the caller + * can kfree it. If not full, return NULL. + */ +static struct ec_event *event_queue_push(struct ec_event_queue *q, + struct ec_event *ev) +{ + struct ec_event *popped = NULL; + + if (event_queue_full(q)) + popped = event_queue_pop(q); + q->entries[q->head] = ev; + q->head = (q->head + 1) % q->capacity; + + return popped; +} + +static void event_queue_free(struct ec_event_queue *q) +{ + struct ec_event *event; + + while ((event = event_queue_pop(q)) != NULL) + kfree(event); + + kfree(q); +} + +/** + * struct event_device_data - Data for a Wilco EC device that responds to ACPI. + * @events: Circular queue of EC events to be provided to userspace. + * @queue_lock: Protect the queue from simultaneous read/writes. + * @wq: Wait queue to notify processes when events are available or the + * device has been removed. + * @cdev: Char dev that userspace reads() and polls() from. + * @dev: Device associated with the %cdev. + * @exist: Has the device been not been removed? Once a device has been removed, + * writes, reads, and new opens will fail. + * @available: Guarantee only one client can open() file and read from queue. + * + * There will be one of these structs for each ACPI device registered. This data + * is the queue of events received from ACPI that still need to be read from + * userspace, the device and char device that userspace is using, a wait queue + * used to notify different threads when something has changed, plus a flag + * on whether the ACPI device has been removed. + */ +struct event_device_data { + struct ec_event_queue *events; + spinlock_t queue_lock; + wait_queue_head_t wq; + struct device dev; + struct cdev cdev; + bool exist; + atomic_t available; +}; + +/** + * enqueue_events() - Place EC events in queue to be read by userspace. + * @adev: Device the events came from. + * @buf: Buffer of event data. + * @length: Length of event data buffer. + * + * %buf contains a number of ec_event's, packed one after the other. + * Each ec_event is of variable length. Start with the first event, copy it + * into a persistent ec_event, store that entry in the queue, move on + * to the next ec_event in buf, and repeat. + * + * Return: 0 on success or negative error code on failure. + */ +static int enqueue_events(struct acpi_device *adev, const u8 *buf, u32 length) +{ + struct event_device_data *dev_data = adev->driver_data; + struct ec_event *event, *queue_event, *old_event; + size_t num_words, event_size; + u32 offset = 0; + + while (offset < length) { + event = (struct ec_event *)(buf + offset); + + num_words = ec_event_num_words(event); + event_size = ec_event_size(event); + if (num_words > EC_ACPI_MAX_EVENT_WORDS) { + dev_err(&adev->dev, "Too many event words: %zu > %d\n", + num_words, EC_ACPI_MAX_EVENT_WORDS); + return -EOVERFLOW; + } + + /* Ensure event does not overflow the available buffer */ + if ((offset + event_size) > length) { + dev_err(&adev->dev, "Event exceeds buffer: %zu > %d\n", + offset + event_size, length); + return -EOVERFLOW; + } + + /* Point to the next event in the buffer */ + offset += event_size; + + /* Copy event into the queue */ + queue_event = kmemdup(event, event_size, GFP_KERNEL); + if (!queue_event) + return -ENOMEM; + spin_lock(&dev_data->queue_lock); + old_event = event_queue_push(dev_data->events, queue_event); + spin_unlock(&dev_data->queue_lock); + kfree(old_event); + wake_up_interruptible(&dev_data->wq); + } + + return 0; +} + +/** + * event_device_notify() - Callback when EC generates an event over ACPI. + * @adev: The device that the event is coming from. + * @value: Value passed to Notify() in ACPI. + * + * This function will read the events from the device and enqueue them. + */ +static void event_device_notify(struct acpi_device *adev, u32 value) +{ + struct acpi_buffer event_buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + + if (value != EC_ACPI_NOTIFY_EVENT) { + dev_err(&adev->dev, "Invalid event: 0x%08x\n", value); + return; + } + + /* Execute ACPI method to get event data buffer. */ + status = acpi_evaluate_object(adev->handle, EC_ACPI_GET_EVENT, + NULL, &event_buffer); + if (ACPI_FAILURE(status)) { + dev_err(&adev->dev, "Error executing ACPI method %s()\n", + EC_ACPI_GET_EVENT); + return; + } + + obj = (union acpi_object *)event_buffer.pointer; + if (!obj) { + dev_err(&adev->dev, "Nothing returned from %s()\n", + EC_ACPI_GET_EVENT); + return; + } + if (obj->type != ACPI_TYPE_BUFFER) { + dev_err(&adev->dev, "Invalid object returned from %s()\n", + EC_ACPI_GET_EVENT); + kfree(obj); + return; + } + if (obj->buffer.length < sizeof(struct ec_event)) { + dev_err(&adev->dev, "Invalid buffer length %d from %s()\n", + obj->buffer.length, EC_ACPI_GET_EVENT); + kfree(obj); + return; + } + + enqueue_events(adev, obj->buffer.pointer, obj->buffer.length); + kfree(obj); +} + +static int event_open(struct inode *inode, struct file *filp) +{ + struct event_device_data *dev_data; + + dev_data = container_of(inode->i_cdev, struct event_device_data, cdev); + if (!dev_data->exist) + return -ENODEV; + + if (atomic_cmpxchg(&dev_data->available, 1, 0) == 0) + return -EBUSY; + + /* Increase refcount on device so dev_data is not freed */ + get_device(&dev_data->dev); + stream_open(inode, filp); + filp->private_data = dev_data; + + return 0; +} + +static __poll_t event_poll(struct file *filp, poll_table *wait) +{ + struct event_device_data *dev_data = filp->private_data; + __poll_t mask = 0; + + poll_wait(filp, &dev_data->wq, wait); + if (!dev_data->exist) + return EPOLLHUP; + if (!event_queue_empty(dev_data->events)) + mask |= EPOLLIN | EPOLLRDNORM | EPOLLPRI; + return mask; +} + +/** + * event_read() - Callback for passing event data to userspace via read(). + * @filp: The file we are reading from. + * @buf: Pointer to userspace buffer to fill with one event. + * @count: Number of bytes requested. Must be at least EC_ACPI_MAX_EVENT_SIZE. + * @pos: File position pointer, irrelevant since we don't support seeking. + * + * Removes the first event from the queue, places it in the passed buffer. + * + * If there are no events in the the queue, then one of two things happens, + * depending on if the file was opened in nonblocking mode: If in nonblocking + * mode, then return -EAGAIN to say there's no data. If in blocking mode, then + * block until an event is available. + * + * Return: Number of bytes placed in buffer, negative error code on failure. + */ +static ssize_t event_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos) +{ + struct event_device_data *dev_data = filp->private_data; + struct ec_event *event; + ssize_t n_bytes_written = 0; + int err; + + /* We only will give them the entire event at once */ + if (count != 0 && count < EC_ACPI_MAX_EVENT_SIZE) + return -EINVAL; + + spin_lock(&dev_data->queue_lock); + while (event_queue_empty(dev_data->events)) { + spin_unlock(&dev_data->queue_lock); + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + + err = wait_event_interruptible(dev_data->wq, + !event_queue_empty(dev_data->events) || + !dev_data->exist); + if (err) + return err; + + /* Device was removed as we waited? */ + if (!dev_data->exist) + return -ENODEV; + spin_lock(&dev_data->queue_lock); + } + event = event_queue_pop(dev_data->events); + spin_unlock(&dev_data->queue_lock); + n_bytes_written = ec_event_size(event); + if (copy_to_user(buf, event, n_bytes_written)) + n_bytes_written = -EFAULT; + kfree(event); + + return n_bytes_written; +} + +static int event_release(struct inode *inode, struct file *filp) +{ + struct event_device_data *dev_data = filp->private_data; + + atomic_set(&dev_data->available, 1); + put_device(&dev_data->dev); + + return 0; +} + +static const struct file_operations event_fops = { + .open = event_open, + .poll = event_poll, + .read = event_read, + .release = event_release, + .llseek = no_llseek, + .owner = THIS_MODULE, +}; + +/** + * free_device_data() - Callback to free the event_device_data structure. + * @d: The device embedded in our device data, which we have been ref counting. + * + * This is called only after event_device_remove() has been called and all + * userspace programs have called event_release() on all the open file + * descriptors. + */ +static void free_device_data(struct device *d) +{ + struct event_device_data *dev_data; + + dev_data = container_of(d, struct event_device_data, dev); + event_queue_free(dev_data->events); + kfree(dev_data); +} + +static void hangup_device(struct event_device_data *dev_data) +{ + dev_data->exist = false; + /* Wake up the waiting processes so they can close. */ + wake_up_interruptible(&dev_data->wq); + put_device(&dev_data->dev); +} + +/** + * event_device_add() - Callback when creating a new device. + * @adev: ACPI device that we will be receiving events from. + * + * This finds a free minor number for the device, allocates and initializes + * some device data, and creates a new device and char dev node. + * + * The device data is freed in free_device_data(), which is called when + * %dev_data->dev is release()ed. This happens after all references to + * %dev_data->dev are dropped, which happens once both event_device_remove() + * has been called and every open()ed file descriptor has been release()ed. + * + * Return: 0 on success, negative error code on failure. + */ +static int event_device_add(struct acpi_device *adev) +{ + struct event_device_data *dev_data; + int error, minor; + + minor = ida_alloc_max(&event_ida, EVENT_MAX_DEV-1, GFP_KERNEL); + if (minor < 0) { + error = minor; + dev_err(&adev->dev, "Failed to find minor number: %d\n", error); + return error; + } + + dev_data = kzalloc(sizeof(*dev_data), GFP_KERNEL); + if (!dev_data) { + error = -ENOMEM; + goto free_minor; + } + + /* Initialize the device data. */ + adev->driver_data = dev_data; + dev_data->events = event_queue_new(queue_size); + if (!dev_data->events) { + kfree(dev_data); + error = -ENOMEM; + goto free_minor; + } + spin_lock_init(&dev_data->queue_lock); + init_waitqueue_head(&dev_data->wq); + dev_data->exist = true; + atomic_set(&dev_data->available, 1); + + /* Initialize the device. */ + dev_data->dev.devt = MKDEV(event_major, minor); + dev_data->dev.class = &event_class; + dev_data->dev.release = free_device_data; + dev_set_name(&dev_data->dev, EVENT_DEV_NAME_FMT, minor); + device_initialize(&dev_data->dev); + + /* Initialize the character device, and add it to userspace. */ + cdev_init(&dev_data->cdev, &event_fops); + error = cdev_device_add(&dev_data->cdev, &dev_data->dev); + if (error) + goto free_dev_data; + + return 0; + +free_dev_data: + hangup_device(dev_data); +free_minor: + ida_simple_remove(&event_ida, minor); + return error; +} + +static int event_device_remove(struct acpi_device *adev) +{ + struct event_device_data *dev_data = adev->driver_data; + + cdev_device_del(&dev_data->cdev, &dev_data->dev); + ida_simple_remove(&event_ida, MINOR(dev_data->dev.devt)); + hangup_device(dev_data); + + return 0; +} + +static const struct acpi_device_id event_acpi_ids[] = { + { "GOOG000D", 0 }, + { } +}; +MODULE_DEVICE_TABLE(acpi, event_acpi_ids); + +static struct acpi_driver event_driver = { + .name = DRV_NAME, + .class = DRV_NAME, + .ids = event_acpi_ids, + .ops = { + .add = event_device_add, + .notify = event_device_notify, + .remove = event_device_remove, + }, + .owner = THIS_MODULE, +}; + +static int __init event_module_init(void) +{ + dev_t dev_num = 0; + int ret; + + ret = class_register(&event_class); + if (ret) { + pr_err(DRV_NAME ": Failed registering class: %d\n", ret); + return ret; + } + + /* Request device numbers, starting with minor=0. Save the major num. */ + ret = alloc_chrdev_region(&dev_num, 0, EVENT_MAX_DEV, EVENT_DEV_NAME); + if (ret) { + pr_err(DRV_NAME ": Failed allocating dev numbers: %d\n", ret); + goto destroy_class; + } + event_major = MAJOR(dev_num); + + ret = acpi_bus_register_driver(&event_driver); + if (ret < 0) { + pr_err(DRV_NAME ": Failed registering driver: %d\n", ret); + goto unregister_region; + } + + return 0; + +unregister_region: + unregister_chrdev_region(MKDEV(event_major, 0), EVENT_MAX_DEV); +destroy_class: + class_unregister(&event_class); + ida_destroy(&event_ida); + return ret; +} + +static void __exit event_module_exit(void) +{ + acpi_bus_unregister_driver(&event_driver); + unregister_chrdev_region(MKDEV(event_major, 0), EVENT_MAX_DEV); + class_unregister(&event_class); + ida_destroy(&event_ida); +} + +module_init(event_module_init); +module_exit(event_module_exit); + +MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); +MODULE_DESCRIPTION("Wilco EC ACPI event driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/platform/chrome/wilco_ec/mailbox.c b/drivers/platform/chrome/wilco_ec/mailbox.c index 7fb58b487963..ced1f9f3dcee 100644 --- a/drivers/platform/chrome/wilco_ec/mailbox.c +++ b/drivers/platform/chrome/wilco_ec/mailbox.c @@ -119,7 +119,6 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec, struct wilco_ec_response *rs; u8 checksum; u8 flag; - size_t size; /* Write request header, then data */ cros_ec_lpc_io_bytes_mec(MEC_IO_WRITE, 0, sizeof(*rq), (u8 *)rq); @@ -148,21 +147,11 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec, return -EIO; } - /* - * The EC always returns either EC_MAILBOX_DATA_SIZE or - * EC_MAILBOX_DATA_SIZE_EXTENDED bytes of data, so we need to - * calculate the checksum on **all** of this data, even if we - * won't use all of it. - */ - if (msg->flags & WILCO_EC_FLAG_EXTENDED_DATA) - size = EC_MAILBOX_DATA_SIZE_EXTENDED; - else - size = EC_MAILBOX_DATA_SIZE; - /* Read back response */ rs = ec->data_buffer; checksum = cros_ec_lpc_io_bytes_mec(MEC_IO_READ, 0, - sizeof(*rs) + size, (u8 *)rs); + sizeof(*rs) + EC_MAILBOX_DATA_SIZE, + (u8 *)rs); if (checksum) { dev_dbg(ec->dev, "bad packet checksum 0x%02x\n", rs->checksum); return -EBADMSG; @@ -173,9 +162,9 @@ static int wilco_ec_transfer(struct wilco_ec_device *ec, return -EBADMSG; } - if (rs->data_size != size) { - dev_dbg(ec->dev, "unexpected packet size (%u != %zu)", - rs->data_size, size); + if (rs->data_size != EC_MAILBOX_DATA_SIZE) { + dev_dbg(ec->dev, "unexpected packet size (%u != %u)", + rs->data_size, EC_MAILBOX_DATA_SIZE); return -EMSGSIZE; } diff --git a/drivers/platform/chrome/wilco_ec/properties.c b/drivers/platform/chrome/wilco_ec/properties.c new file mode 100644 index 000000000000..e69682c95ea2 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/properties.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + */ + +#include <linux/platform_data/wilco-ec.h> +#include <linux/string.h> +#include <linux/unaligned/le_memmove.h> + +/* Operation code; what the EC should do with the property */ +enum ec_property_op { + EC_OP_GET = 0, + EC_OP_SET = 1, +}; + +struct ec_property_request { + u8 op; /* One of enum ec_property_op */ + u8 property_id[4]; /* The 32 bit PID is stored Little Endian */ + u8 length; + u8 data[WILCO_EC_PROPERTY_MAX_SIZE]; +} __packed; + +struct ec_property_response { + u8 reserved[2]; + u8 op; /* One of enum ec_property_op */ + u8 property_id[4]; /* The 32 bit PID is stored Little Endian */ + u8 length; + u8 data[WILCO_EC_PROPERTY_MAX_SIZE]; +} __packed; + +static int send_property_msg(struct wilco_ec_device *ec, + struct ec_property_request *rq, + struct ec_property_response *rs) +{ + struct wilco_ec_message ec_msg; + int ret; + + memset(&ec_msg, 0, sizeof(ec_msg)); + ec_msg.type = WILCO_EC_MSG_PROPERTY; + ec_msg.request_data = rq; + ec_msg.request_size = sizeof(*rq); + ec_msg.response_data = rs; + ec_msg.response_size = sizeof(*rs); + + ret = wilco_ec_mailbox(ec, &ec_msg); + if (ret < 0) + return ret; + if (rs->op != rq->op) + return -EBADMSG; + if (memcmp(rq->property_id, rs->property_id, sizeof(rs->property_id))) + return -EBADMSG; + + return 0; +} + +int wilco_ec_get_property(struct wilco_ec_device *ec, + struct wilco_ec_property_msg *prop_msg) +{ + struct ec_property_request rq; + struct ec_property_response rs; + int ret; + + memset(&rq, 0, sizeof(rq)); + rq.op = EC_OP_GET; + put_unaligned_le32(prop_msg->property_id, rq.property_id); + + ret = send_property_msg(ec, &rq, &rs); + if (ret < 0) + return ret; + + prop_msg->length = rs.length; + memcpy(prop_msg->data, rs.data, rs.length); + + return 0; +} +EXPORT_SYMBOL_GPL(wilco_ec_get_property); + +int wilco_ec_set_property(struct wilco_ec_device *ec, + struct wilco_ec_property_msg *prop_msg) +{ + struct ec_property_request rq; + struct ec_property_response rs; + int ret; + + memset(&rq, 0, sizeof(rq)); + rq.op = EC_OP_SET; + put_unaligned_le32(prop_msg->property_id, rq.property_id); + rq.length = prop_msg->length; + memcpy(rq.data, prop_msg->data, prop_msg->length); + + ret = send_property_msg(ec, &rq, &rs); + if (ret < 0) + return ret; + if (rs.length != prop_msg->length) + return -EBADMSG; + + return 0; +} +EXPORT_SYMBOL_GPL(wilco_ec_set_property); + +int wilco_ec_get_byte_property(struct wilco_ec_device *ec, u32 property_id, + u8 *val) +{ + struct wilco_ec_property_msg msg; + int ret; + + msg.property_id = property_id; + + ret = wilco_ec_get_property(ec, &msg); + if (ret < 0) + return ret; + if (msg.length != 1) + return -EBADMSG; + + *val = msg.data[0]; + + return 0; +} +EXPORT_SYMBOL_GPL(wilco_ec_get_byte_property); + +int wilco_ec_set_byte_property(struct wilco_ec_device *ec, u32 property_id, + u8 val) +{ + struct wilco_ec_property_msg msg; + + msg.property_id = property_id; + msg.data[0] = val; + msg.length = 1; + + return wilco_ec_set_property(ec, &msg); +} +EXPORT_SYMBOL_GPL(wilco_ec_set_byte_property); diff --git a/drivers/platform/chrome/wilco_ec/sysfs.c b/drivers/platform/chrome/wilco_ec/sysfs.c new file mode 100644 index 000000000000..3b86a21005d3 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/sysfs.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Google LLC + * + * Sysfs properties to view and modify EC-controlled features on Wilco devices. + * The entries will appear under /sys/bus/platform/devices/GOOG000C:00/ + * + * See Documentation/ABI/testing/sysfs-platform-wilco-ec for more information. + */ + +#include <linux/platform_data/wilco-ec.h> +#include <linux/sysfs.h> + +#define CMD_KB_CMOS 0x7C +#define SUB_CMD_KB_CMOS_AUTO_ON 0x03 + +struct boot_on_ac_request { + u8 cmd; /* Always CMD_KB_CMOS */ + u8 reserved1; + u8 sub_cmd; /* Always SUB_CMD_KB_CMOS_AUTO_ON */ + u8 reserved3to5[3]; + u8 val; /* Either 0 or 1 */ + u8 reserved7; +} __packed; + +#define CMD_EC_INFO 0x38 +enum get_ec_info_op { + CMD_GET_EC_LABEL = 0, + CMD_GET_EC_REV = 1, + CMD_GET_EC_MODEL = 2, + CMD_GET_EC_BUILD_DATE = 3, +}; + +struct get_ec_info_req { + u8 cmd; /* Always CMD_EC_INFO */ + u8 reserved; + u8 op; /* One of enum get_ec_info_op */ +} __packed; + +struct get_ec_info_resp { + u8 reserved[2]; + char value[9]; /* __nonstring: might not be null terminated */ +} __packed; + +static ssize_t boot_on_ac_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct boot_on_ac_request rq; + struct wilco_ec_message msg; + int ret; + u8 val; + + ret = kstrtou8(buf, 10, &val); + if (ret < 0) + return ret; + if (val > 1) + return -EINVAL; + + memset(&rq, 0, sizeof(rq)); + rq.cmd = CMD_KB_CMOS; + rq.sub_cmd = SUB_CMD_KB_CMOS_AUTO_ON; + rq.val = val; + + memset(&msg, 0, sizeof(msg)); + msg.type = WILCO_EC_MSG_LEGACY; + msg.request_data = &rq; + msg.request_size = sizeof(rq); + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_WO(boot_on_ac); + +static ssize_t get_info(struct device *dev, char *buf, enum get_ec_info_op op) +{ + struct wilco_ec_device *ec = dev_get_drvdata(dev); + struct get_ec_info_req req = { .cmd = CMD_EC_INFO, .op = op }; + struct get_ec_info_resp resp; + int ret; + + struct wilco_ec_message msg = { + .type = WILCO_EC_MSG_LEGACY, + .request_data = &req, + .request_size = sizeof(req), + .response_data = &resp, + .response_size = sizeof(resp), + }; + + ret = wilco_ec_mailbox(ec, &msg); + if (ret < 0) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%.*s\n", (int)sizeof(resp.value), + (char *)&resp.value); +} + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_LABEL); +} + +static DEVICE_ATTR_RO(version); + +static ssize_t build_revision_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_REV); +} + +static DEVICE_ATTR_RO(build_revision); + +static ssize_t build_date_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_BUILD_DATE); +} + +static DEVICE_ATTR_RO(build_date); + +static ssize_t model_number_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return get_info(dev, buf, CMD_GET_EC_MODEL); +} + +static DEVICE_ATTR_RO(model_number); + + +static struct attribute *wilco_dev_attrs[] = { + &dev_attr_boot_on_ac.attr, + &dev_attr_build_date.attr, + &dev_attr_build_revision.attr, + &dev_attr_model_number.attr, + &dev_attr_version.attr, + NULL, +}; + +static struct attribute_group wilco_dev_attr_group = { + .attrs = wilco_dev_attrs, +}; + +int wilco_ec_add_sysfs(struct wilco_ec_device *ec) +{ + return sysfs_create_group(&ec->dev->kobj, &wilco_dev_attr_group); +} + +void wilco_ec_remove_sysfs(struct wilco_ec_device *ec) +{ + sysfs_remove_group(&ec->dev->kobj, &wilco_dev_attr_group); +} diff --git a/drivers/platform/chrome/wilco_ec/telemetry.c b/drivers/platform/chrome/wilco_ec/telemetry.c new file mode 100644 index 000000000000..94cdc166c840 --- /dev/null +++ b/drivers/platform/chrome/wilco_ec/telemetry.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Telemetry communication for Wilco EC + * + * Copyright 2019 Google LLC + * + * The Wilco Embedded Controller is able to send telemetry data + * which is useful for enterprise applications. A daemon running on + * the OS sends a command to the EC via a write() to a char device, + * and can read the response with a read(). The write() request is + * verified by the driver to ensure that it is performing only one + * of the whitelisted commands, and that no extraneous data is + * being transmitted to the EC. The response is passed directly + * back to the reader with no modification. + * + * The character device will appear as /dev/wilco_telemN, where N + * is some small non-negative integer, starting with 0. Only one + * process may have the file descriptor open at a time. The calling + * userspace program needs to keep the device file descriptor open + * between the calls to write() and read() in order to preserve the + * response. Up to 32 bytes will be available for reading. + * + * For testing purposes, try requesting the EC's firmware build + * date, by sending the WILCO_EC_TELEM_GET_VERSION command with + * argument index=3. i.e. write [0x38, 0x00, 0x03] + * to the device node. An ASCII string of the build date is + * returned. + */ + +#include <linux/cdev.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/platform_data/wilco-ec.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +#define TELEM_DEV_NAME "wilco_telem" +#define TELEM_CLASS_NAME TELEM_DEV_NAME +#define DRV_NAME TELEM_DEV_NAME +#define TELEM_DEV_NAME_FMT (TELEM_DEV_NAME "%d") +static struct class telem_class = { + .owner = THIS_MODULE, + .name = TELEM_CLASS_NAME, +}; + +/* Keep track of all the device numbers used. */ +#define TELEM_MAX_DEV 128 +static int telem_major; +static DEFINE_IDA(telem_ida); + +/* EC telemetry command codes */ +#define WILCO_EC_TELEM_GET_LOG 0x99 +#define WILCO_EC_TELEM_GET_VERSION 0x38 +#define WILCO_EC_TELEM_GET_FAN_INFO 0x2E +#define WILCO_EC_TELEM_GET_DIAG_INFO 0xFA +#define WILCO_EC_TELEM_GET_TEMP_INFO 0x95 +#define WILCO_EC_TELEM_GET_TEMP_READ 0x2C +#define WILCO_EC_TELEM_GET_BATT_EXT_INFO 0x07 + +#define TELEM_ARGS_SIZE_MAX 30 + +/** + * struct wilco_ec_telem_request - Telemetry command and arguments sent to EC. + * @command: One of WILCO_EC_TELEM_GET_* command codes. + * @reserved: Must be 0. + * @args: The first N bytes are one of telem_args_get_* structs, the rest is 0. + */ +struct wilco_ec_telem_request { + u8 command; + u8 reserved; + u8 args[TELEM_ARGS_SIZE_MAX]; +} __packed; + +/* + * The following telem_args_get_* structs are embedded within the |args| field + * of wilco_ec_telem_request. + */ + +struct telem_args_get_log { + u8 log_type; + u8 log_index; +} __packed; + +/* + * Get a piece of info about the EC firmware version: + * 0 = label + * 1 = svn_rev + * 2 = model_no + * 3 = build_date + * 4 = frio_version + */ +struct telem_args_get_version { + u8 index; +} __packed; + +struct telem_args_get_fan_info { + u8 command; + u8 fan_number; + u8 arg; +} __packed; + +struct telem_args_get_diag_info { + u8 type; + u8 sub_type; +} __packed; + +struct telem_args_get_temp_info { + u8 command; + u8 index; + u8 field; + u8 zone; +} __packed; + +struct telem_args_get_temp_read { + u8 sensor_index; +} __packed; + +struct telem_args_get_batt_ext_info { + u8 var_args[5]; +} __packed; + +/** + * check_telem_request() - Ensure that a request from userspace is valid. + * @rq: Request buffer copied from userspace. + * @size: Number of bytes copied from userspace. + * + * Return: 0 if valid, -EINVAL if bad command or reserved byte is non-zero, + * -EMSGSIZE if the request is too long. + * + * We do not want to allow userspace to send arbitrary telemetry commands to + * the EC. Therefore we check to ensure that + * 1. The request follows the format of struct wilco_ec_telem_request. + * 2. The supplied command code is one of the whitelisted commands. + * 3. The request only contains the necessary data for the header and arguments. + */ +static int check_telem_request(struct wilco_ec_telem_request *rq, + size_t size) +{ + size_t max_size = offsetof(struct wilco_ec_telem_request, args); + + if (rq->reserved) + return -EINVAL; + + switch (rq->command) { + case WILCO_EC_TELEM_GET_LOG: + max_size += sizeof(struct telem_args_get_log); + break; + case WILCO_EC_TELEM_GET_VERSION: + max_size += sizeof(struct telem_args_get_version); + break; + case WILCO_EC_TELEM_GET_FAN_INFO: + max_size += sizeof(struct telem_args_get_fan_info); + break; + case WILCO_EC_TELEM_GET_DIAG_INFO: + max_size += sizeof(struct telem_args_get_diag_info); + break; + case WILCO_EC_TELEM_GET_TEMP_INFO: + max_size += sizeof(struct telem_args_get_temp_info); + break; + case WILCO_EC_TELEM_GET_TEMP_READ: + max_size += sizeof(struct telem_args_get_temp_read); + break; + case WILCO_EC_TELEM_GET_BATT_EXT_INFO: + max_size += sizeof(struct telem_args_get_batt_ext_info); + break; + default: + return -EINVAL; + } + + return (size <= max_size) ? 0 : -EMSGSIZE; +} + +/** + * struct telem_device_data - Data for a Wilco EC device that queries telemetry. + * @cdev: Char dev that userspace reads and polls from. + * @dev: Device associated with the %cdev. + * @ec: Wilco EC that we will be communicating with using the mailbox interface. + * @available: Boolean of if the device can be opened. + */ +struct telem_device_data { + struct device dev; + struct cdev cdev; + struct wilco_ec_device *ec; + atomic_t available; +}; + +#define TELEM_RESPONSE_SIZE EC_MAILBOX_DATA_SIZE + +/** + * struct telem_session_data - Data that exists between open() and release(). + * @dev_data: Pointer to get back to the device data and EC. + * @request: Command and arguments sent to EC. + * @response: Response buffer of data from EC. + * @has_msg: Is there data available to read from a previous write? + */ +struct telem_session_data { + struct telem_device_data *dev_data; + struct wilco_ec_telem_request request; + u8 response[TELEM_RESPONSE_SIZE]; + bool has_msg; +}; + +/** + * telem_open() - Callback for when the device node is opened. + * @inode: inode for this char device node. + * @filp: file for this char device node. + * + * We need to ensure that after writing a command to the device, + * the same userspace process reads the corresponding result. + * Therefore, we increment a refcount on opening the device, so that + * only one process can communicate with the EC at a time. + * + * Return: 0 on success, or negative error code on failure. + */ +static int telem_open(struct inode *inode, struct file *filp) +{ + struct telem_device_data *dev_data; + struct telem_session_data *sess_data; + + /* Ensure device isn't already open */ + dev_data = container_of(inode->i_cdev, struct telem_device_data, cdev); + if (atomic_cmpxchg(&dev_data->available, 1, 0) == 0) + return -EBUSY; + + get_device(&dev_data->dev); + + sess_data = kzalloc(sizeof(*sess_data), GFP_KERNEL); + if (!sess_data) { + atomic_set(&dev_data->available, 1); + return -ENOMEM; + } + sess_data->dev_data = dev_data; + sess_data->has_msg = false; + + nonseekable_open(inode, filp); + filp->private_data = sess_data; + + return 0; +} + +static ssize_t telem_write(struct file *filp, const char __user *buf, + size_t count, loff_t *pos) +{ + struct telem_session_data *sess_data = filp->private_data; + struct wilco_ec_message msg = {}; + int ret; + + if (count > sizeof(sess_data->request)) + return -EMSGSIZE; + if (copy_from_user(&sess_data->request, buf, count)) + return -EFAULT; + ret = check_telem_request(&sess_data->request, count); + if (ret < 0) + return ret; + + memset(sess_data->response, 0, sizeof(sess_data->response)); + msg.type = WILCO_EC_MSG_TELEMETRY; + msg.request_data = &sess_data->request; + msg.request_size = sizeof(sess_data->request); + msg.response_data = sess_data->response; + msg.response_size = sizeof(sess_data->response); + + ret = wilco_ec_mailbox(sess_data->dev_data->ec, &msg); + if (ret < 0) + return ret; + if (ret != sizeof(sess_data->response)) + return -EMSGSIZE; + + sess_data->has_msg = true; + + return count; +} + +static ssize_t telem_read(struct file *filp, char __user *buf, size_t count, + loff_t *pos) +{ + struct telem_session_data *sess_data = filp->private_data; + + if (!sess_data->has_msg) + return -ENODATA; + if (count > sizeof(sess_data->response)) + return -EINVAL; + + if (copy_to_user(buf, sess_data->response, count)) + return -EFAULT; + + sess_data->has_msg = false; + + return count; +} + +static int telem_release(struct inode *inode, struct file *filp) +{ + struct telem_session_data *sess_data = filp->private_data; + + atomic_set(&sess_data->dev_data->available, 1); + put_device(&sess_data->dev_data->dev); + kfree(sess_data); + + return 0; +} + +static const struct file_operations telem_fops = { + .open = telem_open, + .write = telem_write, + .read = telem_read, + .release = telem_release, + .llseek = no_llseek, + .owner = THIS_MODULE, +}; + +/** + * telem_device_free() - Callback to free the telem_device_data structure. + * @d: The device embedded in our device data, which we have been ref counting. + * + * Once all open file descriptors are closed and the device has been removed, + * the refcount of the device will fall to 0 and this will be called. + */ +static void telem_device_free(struct device *d) +{ + struct telem_device_data *dev_data; + + dev_data = container_of(d, struct telem_device_data, dev); + kfree(dev_data); +} + +/** + * telem_device_probe() - Callback when creating a new device. + * @pdev: platform device that we will be receiving telems from. + * + * This finds a free minor number for the device, allocates and initializes + * some device data, and creates a new device and char dev node. + * + * Return: 0 on success, negative error code on failure. + */ +static int telem_device_probe(struct platform_device *pdev) +{ + struct telem_device_data *dev_data; + int error, minor; + + /* Get the next available device number */ + minor = ida_alloc_max(&telem_ida, TELEM_MAX_DEV-1, GFP_KERNEL); + if (minor < 0) { + error = minor; + dev_err(&pdev->dev, "Failed to find minor number: %d", error); + return error; + } + + dev_data = kzalloc(sizeof(*dev_data), GFP_KERNEL); + if (!dev_data) { + ida_simple_remove(&telem_ida, minor); + return -ENOMEM; + } + + /* Initialize the device data */ + dev_data->ec = dev_get_platdata(&pdev->dev); + atomic_set(&dev_data->available, 1); + platform_set_drvdata(pdev, dev_data); + + /* Initialize the device */ + dev_data->dev.devt = MKDEV(telem_major, minor); + dev_data->dev.class = &telem_class; + dev_data->dev.release = telem_device_free; + dev_set_name(&dev_data->dev, TELEM_DEV_NAME_FMT, minor); + device_initialize(&dev_data->dev); + + /* Initialize the character device and add it to userspace */; + cdev_init(&dev_data->cdev, &telem_fops); + error = cdev_device_add(&dev_data->cdev, &dev_data->dev); + if (error) { + put_device(&dev_data->dev); + ida_simple_remove(&telem_ida, minor); + return error; + } + + return 0; +} + +static int telem_device_remove(struct platform_device *pdev) +{ + struct telem_device_data *dev_data = platform_get_drvdata(pdev); + + cdev_device_del(&dev_data->cdev, &dev_data->dev); + put_device(&dev_data->dev); + ida_simple_remove(&telem_ida, MINOR(dev_data->dev.devt)); + + return 0; +} + +static struct platform_driver telem_driver = { + .probe = telem_device_probe, + .remove = telem_device_remove, + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init telem_module_init(void) +{ + dev_t dev_num = 0; + int ret; + + ret = class_register(&telem_class); + if (ret) { + pr_err(DRV_NAME ": Failed registering class: %d", ret); + return ret; + } + + /* Request the kernel for device numbers, starting with minor=0 */ + ret = alloc_chrdev_region(&dev_num, 0, TELEM_MAX_DEV, TELEM_DEV_NAME); + if (ret) { + pr_err(DRV_NAME ": Failed allocating dev numbers: %d", ret); + goto destroy_class; + } + telem_major = MAJOR(dev_num); + + ret = platform_driver_register(&telem_driver); + if (ret < 0) { + pr_err(DRV_NAME ": Failed registering driver: %d\n", ret); + goto unregister_region; + } + + return 0; + +unregister_region: + unregister_chrdev_region(MKDEV(telem_major, 0), TELEM_MAX_DEV); +destroy_class: + class_unregister(&telem_class); + ida_destroy(&telem_ida); + return ret; +} + +static void __exit telem_module_exit(void) +{ + platform_driver_unregister(&telem_driver); + unregister_chrdev_region(MKDEV(telem_major, 0), TELEM_MAX_DEV); + class_unregister(&telem_class); + ida_destroy(&telem_ida); +} + +module_init(telem_module_init); +module_exit(telem_module_exit); + +MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>"); +MODULE_DESCRIPTION("Wilco EC telemetry driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |
