summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/of/Kconfig8
-rw-r--r--drivers/of/Makefile1
-rw-r--r--drivers/of/of_pci.c112
-rw-r--r--drivers/of/of_pci_irq.c92
-rw-r--r--drivers/pci/Makefile2
-rw-r--r--drivers/pci/hotplug/rpadlpar_core.c2
-rw-r--r--drivers/pci/of.c61
-rw-r--r--drivers/pci/probe.c7
8 files changed, 200 insertions, 85 deletions
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
index d06a6374ed6c..cac63c9f49ae 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -71,8 +71,14 @@ config OF_MDIO
config OF_PCI
def_tristate PCI
- depends on PCI && (PPC || MICROBLAZE || X86)
+ depends on PCI
help
OpenFirmware PCI bus accessors
+config OF_PCI_IRQ
+ def_tristate PCI
+ depends on OF_PCI && OF_IRQ
+ help
+ OpenFirmware PCI IRQ routing helpers
+
endmenu # OF
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index f7861ed2f287..dccb1176be57 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_OF_NET) += of_net.o
obj-$(CONFIG_OF_SPI) += of_spi.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI) += of_pci.o
+obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c
index ac1ec54e4fd5..ec7b060ae952 100644
--- a/drivers/of/of_pci.c
+++ b/drivers/of/of_pci.c
@@ -1,92 +1,40 @@
#include <linux/kernel.h>
#include <linux/of_pci.h>
-#include <linux/of_irq.h>
#include <asm/prom.h>
-/**
- * of_irq_map_pci - Resolve the interrupt for a PCI device
- * @pdev: the device whose interrupt is to be resolved
- * @out_irq: structure of_irq filled by this function
- *
- * This function resolves the PCI interrupt for a given PCI device. If a
- * device-node exists for a given pci_dev, it will use normal OF tree
- * walking. If not, it will implement standard swizzling and walk up the
- * PCI tree until an device-node is found, at which point it will finish
- * resolving using the OF tree walking.
- */
-int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+static inline int __of_pci_pci_compare(struct device_node *node,
+ unsigned int devfn)
{
- struct device_node *dn, *ppnode;
- struct pci_dev *ppdev;
- u32 lspec;
- __be32 lspec_be;
- __be32 laddr[3];
- u8 pin;
- int rc;
+ unsigned int size;
+ const __be32 *reg = of_get_property(node, "reg", &size);
- /* Check if we have a device node, if yes, fallback to standard
- * device tree parsing
- */
- dn = pci_device_to_OF_node(pdev);
- if (dn) {
- rc = of_irq_map_one(dn, 0, out_irq);
- if (!rc)
- return rc;
- }
-
- /* Ok, we don't, time to have fun. Let's start by building up an
- * interrupt spec. we assume #interrupt-cells is 1, which is standard
- * for PCI. If you do different, then don't use that routine.
- */
- rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
- if (rc != 0)
- return rc;
- /* No pin, exit */
- if (pin == 0)
- return -ENODEV;
-
- /* Now we walk up the PCI tree */
- lspec = pin;
- for (;;) {
- /* Get the pci_dev of our parent */
- ppdev = pdev->bus->self;
-
- /* Ouch, it's a host bridge... */
- if (ppdev == NULL) {
- ppnode = pci_bus_to_OF_node(pdev->bus);
-
- /* No node for host bridge ? give up */
- if (ppnode == NULL)
- return -EINVAL;
- } else {
- /* We found a P2P bridge, check if it has a node */
- ppnode = pci_device_to_OF_node(ppdev);
- }
-
- /* Ok, we have found a parent with a device-node, hand over to
- * the OF parsing code.
- * We build a unit address from the linux device to be used for
- * resolution. Note that we use the linux bus number which may
- * not match your firmware bus numbering.
- * Fortunately, in most cases, interrupt-map-mask doesn't
- * include the bus number as part of the matching.
- * You should still be careful about that though if you intend
- * to rely on this function (you ship a firmware that doesn't
- * create device nodes for all PCI devices).
- */
- if (ppnode)
- break;
+ if (!reg || size < 5 * sizeof(__be32))
+ return 0;
+ return ((be32_to_cpup(&reg[0]) >> 8) & 0xff) == devfn;
+}
- /* We can only get here if we hit a P2P bridge with no node,
- * let's do standard swizzling and try again
+struct device_node *of_pci_find_child_device(struct device_node *parent,
+ unsigned int devfn)
+{
+ struct device_node *node, *node2;
+
+ for_each_child_of_node(parent, node) {
+ if (__of_pci_pci_compare(node, devfn))
+ return node;
+ /*
+ * Some OFs create a parent node "multifunc-device" as
+ * a fake root for all functions of a multi-function
+ * device we go down them as well.
*/
- lspec = pci_swizzle_interrupt_pin(pdev, lspec);
- pdev = ppdev;
+ if (!strcmp(node->name, "multifunc-device")) {
+ for_each_child_of_node(node, node2) {
+ if (__of_pci_pci_compare(node2, devfn)) {
+ of_node_put(node);
+ return node2;
+ }
+ }
+ }
}
-
- lspec_be = cpu_to_be32(lspec);
- laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
- laddr[1] = laddr[2] = cpu_to_be32(0);
- return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+ return NULL;
}
-EXPORT_SYMBOL_GPL(of_irq_map_pci);
+EXPORT_SYMBOL_GPL(of_pci_find_child_device);
diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
new file mode 100644
index 000000000000..ac1ec54e4fd5
--- /dev/null
+++ b/drivers/of/of_pci_irq.c
@@ -0,0 +1,92 @@
+#include <linux/kernel.h>
+#include <linux/of_pci.h>
+#include <linux/of_irq.h>
+#include <asm/prom.h>
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev: the device whose interrupt is to be resolved
+ * @out_irq: structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
+{
+ struct device_node *dn, *ppnode;
+ struct pci_dev *ppdev;
+ u32 lspec;
+ __be32 lspec_be;
+ __be32 laddr[3];
+ u8 pin;
+ int rc;
+
+ /* Check if we have a device node, if yes, fallback to standard
+ * device tree parsing
+ */
+ dn = pci_device_to_OF_node(pdev);
+ if (dn) {
+ rc = of_irq_map_one(dn, 0, out_irq);
+ if (!rc)
+ return rc;
+ }
+
+ /* Ok, we don't, time to have fun. Let's start by building up an
+ * interrupt spec. we assume #interrupt-cells is 1, which is standard
+ * for PCI. If you do different, then don't use that routine.
+ */
+ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
+ if (rc != 0)
+ return rc;
+ /* No pin, exit */
+ if (pin == 0)
+ return -ENODEV;
+
+ /* Now we walk up the PCI tree */
+ lspec = pin;
+ for (;;) {
+ /* Get the pci_dev of our parent */
+ ppdev = pdev->bus->self;
+
+ /* Ouch, it's a host bridge... */
+ if (ppdev == NULL) {
+ ppnode = pci_bus_to_OF_node(pdev->bus);
+
+ /* No node for host bridge ? give up */
+ if (ppnode == NULL)
+ return -EINVAL;
+ } else {
+ /* We found a P2P bridge, check if it has a node */
+ ppnode = pci_device_to_OF_node(ppdev);
+ }
+
+ /* Ok, we have found a parent with a device-node, hand over to
+ * the OF parsing code.
+ * We build a unit address from the linux device to be used for
+ * resolution. Note that we use the linux bus number which may
+ * not match your firmware bus numbering.
+ * Fortunately, in most cases, interrupt-map-mask doesn't
+ * include the bus number as part of the matching.
+ * You should still be careful about that though if you intend
+ * to rely on this function (you ship a firmware that doesn't
+ * create device nodes for all PCI devices).
+ */
+ if (ppnode)
+ break;
+
+ /* We can only get here if we hit a P2P bridge with no node,
+ * let's do standard swizzling and try again
+ */
+ lspec = pci_swizzle_interrupt_pin(pdev, lspec);
+ pdev = ppdev;
+ }
+
+ lspec_be = cpu_to_be32(lspec);
+ laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
+ laddr[1] = laddr[2] = cpu_to_be32(0);
+ return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq);
+}
+EXPORT_SYMBOL_GPL(of_irq_map_pci);
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index c85f744270a5..f27f4a1488a1 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -70,4 +70,6 @@ obj-$(CONFIG_PCI_STUB) += pci-stub.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
+obj-$(CONFIG_OF) += of.o
+
ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c
index 083034710fa6..1d002b1c2bf4 100644
--- a/drivers/pci/hotplug/rpadlpar_core.c
+++ b/drivers/pci/hotplug/rpadlpar_core.c
@@ -158,7 +158,7 @@ static void dlpar_pci_add_bus(struct device_node *dn)
/* Scan below the new bridge */
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS)
- of_scan_pci_bridge(dn, dev);
+ of_scan_pci_bridge(dev);
/* Map IO space for child bus, which may or may not succeed */
pcibios_map_io_space(dev->subordinate);
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
new file mode 100644
index 000000000000..c94d37ec55c8
--- /dev/null
+++ b/drivers/pci/of.c
@@ -0,0 +1,61 @@
+/*
+ * PCI <-> OF mapping helpers
+ *
+ * Copyright 2011 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_pci.h>
+#include "pci.h"
+
+void pci_set_of_node(struct pci_dev *dev)
+{
+ if (!dev->bus->dev.of_node)
+ return;
+ dev->dev.of_node = of_pci_find_child_device(dev->bus->dev.of_node,
+ dev->devfn);
+}
+
+void pci_release_of_node(struct pci_dev *dev)
+{
+ of_node_put(dev->dev.of_node);
+ dev->dev.of_node = NULL;
+}
+
+void pci_set_bus_of_node(struct pci_bus *bus)
+{
+ if (bus->self == NULL)
+ bus->dev.of_node = pcibios_get_phb_of_node(bus);
+ else
+ bus->dev.of_node = of_node_get(bus->self->dev.of_node);
+}
+
+void pci_release_bus_of_node(struct pci_bus *bus)
+{
+ of_node_put(bus->dev.of_node);
+ bus->dev.of_node = NULL;
+}
+
+struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus)
+{
+ /* This should only be called for PHBs */
+ if (WARN_ON(bus->self || bus->parent))
+ return NULL;
+
+ /* Look for a node pointer in either the intermediary device we
+ * create above the root bus or it's own parent. Normally only
+ * the later is populated.
+ */
+ if (bus->bridge->of_node)
+ return of_node_get(bus->bridge->of_node);
+ if (bus->bridge->parent->of_node)
+ return of_node_get(bus->bridge->parent->of_node);
+ return NULL;
+}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 48849ffdd672..c28c7b91910e 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -52,6 +52,7 @@ static void release_pcibus_dev(struct device *dev)
if (pci_bus->bridge)
put_device(pci_bus->bridge);
pci_bus_remove_resources(pci_bus);
+ pci_release_bus_of_node(pci_bus);
kfree(pci_bus);
}
@@ -588,7 +589,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
child->self = bridge;
child->bridge = get_device(&bridge->dev);
-
+ pci_set_bus_of_node(child);
pci_set_bus_speed(child);
/* Set up default resource pointers and names.. */
@@ -1038,6 +1039,7 @@ static void pci_release_dev(struct device *dev)
pci_dev = to_pci_dev(dev);
pci_release_capabilities(pci_dev);
+ pci_release_of_node(pci_dev);
kfree(pci_dev);
}
@@ -1157,6 +1159,8 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
dev->vendor = l & 0xffff;
dev->device = (l >> 16) & 0xffff;
+ pci_set_of_node(dev);
+
if (pci_setup_device(dev)) {
kfree(dev);
return NULL;
@@ -1409,6 +1413,7 @@ struct pci_bus * pci_create_bus(struct device *parent,
goto dev_reg_err;
b->bridge = get_device(dev);
device_enable_async_suspend(b->bridge);
+ pci_set_bus_of_node(b);
if (!parent)
set_dev_node(b->bridge, pcibus_to_node(b));
OpenPOWER on IntegriCloud