diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/i2c/busses/i2c-aspeed.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-axxia.c | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-diolan-u2c.c | 11 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-efm32.c | 3 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-eg20t.c | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-emev2.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-hix5hd2.c | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-imx-lpi2c.c | 4 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-imx.c | 10 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-kempld.c | 7 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-mxs.c | 9 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-ocores.c | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-pasemi.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-rcar.c | 2 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-riic.c | 5 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-stu300.c | 22 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-xiic.c | 11 |
18 files changed, 47 insertions, 70 deletions
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 7d4aeb4465b3..60e4d0e939a3 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -335,13 +335,12 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus) { u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD; struct i2c_msg *msg = &bus->msgs[bus->msgs_index]; - u8 slave_addr = msg->addr << 1; + u8 slave_addr = i2c_8bit_addr_from_msg(msg); bus->master_state = ASPEED_I2C_MASTER_START; bus->buf_index = 0; if (msg->flags & I2C_M_RD) { - slave_addr |= 1; command |= ASPEED_I2CD_M_RX_CMD; /* Need to let the hardware know to NACK after RX. */ if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN)) diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c index 12f92369888b..8e60048a33f8 100644 --- a/drivers/i2c/busses/i2c-axxia.c +++ b/drivers/i2c/busses/i2c-axxia.c @@ -351,13 +351,15 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) * addr_2: addr[7:0] */ addr_1 = 0xF0 | ((msg->addr >> 7) & 0x06); + if (i2c_m_rd(msg)) + addr_1 |= 1; /* Set the R/nW bit of the address */ addr_2 = msg->addr & 0xFF; } else { /* 7-bit address * addr_1: addr[6:0] | (R/nW) * addr_2: dont care */ - addr_1 = (msg->addr << 1) & 0xFF; + addr_1 = i2c_8bit_addr_from_msg(msg); addr_2 = 0; } @@ -365,7 +367,6 @@ static int axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct i2c_msg *msg) /* I2C read transfer */ rx_xfer = i2c_m_recv_len(msg) ? I2C_SMBUS_BLOCK_MAX : msg->len; tx_xfer = 0; - addr_1 |= 1; /* Set the R/nW bit of the address */ } else { /* I2C write transfer */ rx_xfer = 0; diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c index f718ee4e3332..3f28317cde39 100644 --- a/drivers/i2c/busses/i2c-diolan-u2c.c +++ b/drivers/i2c/busses/i2c-diolan-u2c.c @@ -360,11 +360,11 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, if (ret < 0) goto abort; } + ret = diolan_i2c_put_byte_ack(dev, + i2c_8bit_addr_from_msg(pmsg)); + if (ret < 0) + goto abort; if (pmsg->flags & I2C_M_RD) { - ret = - diolan_i2c_put_byte_ack(dev, (pmsg->addr << 1) | 1); - if (ret < 0) - goto abort; for (j = 0; j < pmsg->len; j++) { u8 byte; bool ack = j < pmsg->len - 1; @@ -393,9 +393,6 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, pmsg->buf[j] = byte; } } else { - ret = diolan_i2c_put_byte_ack(dev, pmsg->addr << 1); - if (ret < 0) - goto abort; for (j = 0; j < pmsg->len; j++) { ret = diolan_i2c_put_byte_ack(dev, pmsg->buf[j]); diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c index aa336ba89aa3..5f2bab878b2c 100644 --- a/drivers/i2c/busses/i2c-efm32.c +++ b/drivers/i2c/busses/i2c-efm32.c @@ -144,8 +144,7 @@ static void efm32_i2c_send_next_msg(struct efm32_i2c_ddata *ddata) struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg]; efm32_i2c_write32(ddata, REG_CMD, REG_CMD_START); - efm32_i2c_write32(ddata, REG_TXDATA, cur_msg->addr << 1 | - (cur_msg->flags & I2C_M_RD ? 1 : 0)); + efm32_i2c_write32(ddata, REG_TXDATA, i2c_8bit_addr_from_msg(cur_msg)); } static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata) diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index bdeab0174fec..835d54ac2971 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -414,7 +414,7 @@ static s32 pch_i2c_writebytes(struct i2c_adapter *i2c_adap, iowrite32(addr_8_lsb, p + PCH_I2CDR); } else { /* set 7 bit slave address and R/W bit as 0 */ - iowrite32(addr << 1, p + PCH_I2CDR); + iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR); if (first) pch_i2c_start(adap); } @@ -538,8 +538,7 @@ static s32 pch_i2c_readbytes(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, iowrite32(addr_2_msb | TEN_BIT_ADDR_MASK, p + PCH_I2CDR); } else { /* 7 address bits + R/W bit */ - addr = (((addr) << 1) | (I2C_RD)); - iowrite32(addr, p + PCH_I2CDR); + iowrite32(i2c_8bit_addr_from_msg(msgs), p + PCH_I2CDR); } /* check if it is the first message */ diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index d2e84480fbe9..ba9b6ea48a31 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -149,7 +149,7 @@ static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0); /* Send slave address and R/W type */ - writeb((msg->addr << 1) | read, priv->base + I2C_OFS_IIC0); + writeb(i2c_8bit_addr_from_msg(msg), priv->base + I2C_OFS_IIC0); /* Wait for transaction */ status = em_i2c_wait_for_event(priv); diff --git a/drivers/i2c/busses/i2c-hix5hd2.c b/drivers/i2c/busses/i2c-hix5hd2.c index f69dd6e46f2d..061a4bfb03f4 100644 --- a/drivers/i2c/busses/i2c-hix5hd2.c +++ b/drivers/i2c/busses/i2c-hix5hd2.c @@ -73,7 +73,6 @@ #define I2C_OVER_INTR BIT(0) #define HIX5I2C_MAX_FREQ 400000 /* 400k */ -#define HIX5I2C_READ_OPERATION 0x01 enum hix5hd2_i2c_state { HIX5I2C_STAT_RW_ERR = -1, @@ -311,12 +310,8 @@ static void hix5hd2_i2c_message_start(struct hix5hd2_i2c_priv *priv, int stop) hix5hd2_i2c_clr_all_irq(priv); hix5hd2_i2c_enable_irq(priv); - if (priv->msg->flags & I2C_M_RD) - writel_relaxed((priv->msg->addr << 1) | HIX5I2C_READ_OPERATION, - priv->regs + HIX5I2C_TXR); - else - writel_relaxed(priv->msg->addr << 1, - priv->regs + HIX5I2C_TXR); + writel_relaxed(i2c_8bit_addr_from_msg(priv->msg), + priv->regs + HIX5I2C_TXR); writel_relaxed(I2C_WRITE | I2C_START, priv->regs + HIX5I2C_COM); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index e6da2c7a9a3e..159d23211600 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -180,15 +180,13 @@ static int lpi2c_imx_start(struct lpi2c_imx_struct *lpi2c_imx, struct i2c_msg *msgs) { unsigned int temp; - u8 read; temp = readl(lpi2c_imx->base + LPI2C_MCR); temp |= MCR_RRF | MCR_RTF; writel(temp, lpi2c_imx->base + LPI2C_MCR); writel(0x7f00, lpi2c_imx->base + LPI2C_MSR); - read = msgs->flags & I2C_M_RD; - temp = (msgs->addr << 1 | read) | (GEN_START << 8); + temp = i2c_8bit_addr_from_msg(msgs) | (GEN_START << 8); writel(temp, lpi2c_imx->base + LPI2C_MTDR); return lpi2c_imx_bus_busy(lpi2c_imx); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index e0fc3c06b607..0207e194f84b 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -621,7 +621,7 @@ static int i2c_imx_dma_write(struct imx_i2c_struct *i2c_imx, * Write slave address. * The first byte must be transmitted by the CPU. */ - imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR); + imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); reinit_completion(&i2c_imx->dma->cmd_complete); time_left = wait_for_completion_timeout( &i2c_imx->dma->cmd_complete, @@ -751,10 +751,10 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) int i, result; dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n", - __func__, msgs->addr << 1); + __func__, i2c_8bit_addr_from_msg(msgs)); /* write slave address */ - imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR); + imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); result = i2c_imx_trx_complete(i2c_imx); if (result) return result; @@ -787,10 +787,10 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs, bo dev_dbg(&i2c_imx->adapter.dev, "<%s> write slave address: addr=0x%x\n", - __func__, (msgs->addr << 1) | 0x01); + __func__, i2c_8bit_addr_from_msg(msgs)); /* write slave address */ - imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR); + imx_i2c_write_reg(i2c_8bit_addr_from_msg(msgs), i2c_imx, IMX_I2C_I2DR); result = i2c_imx_trx_complete(i2c_imx); if (result) return result; diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c index e879190b5d1d..1c874aaa0447 100644 --- a/drivers/i2c/busses/i2c-kempld.c +++ b/drivers/i2c/busses/i2c-kempld.c @@ -124,15 +124,14 @@ static int kempld_i2c_process(struct kempld_i2c_data *i2c) /* 10 bit address? */ if (i2c->msg->flags & I2C_M_TEN) { addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6); + /* Set read bit if necessary */ + addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0; i2c->state = STATE_ADDR10; } else { - addr = (i2c->msg->addr << 1); + addr = i2c_8bit_addr_from_msg(i2c->msg); i2c->state = STATE_START; } - /* Set read bit if necessary */ - addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0; - kempld_write8(pld, KEMPLD_I2C_DATA, addr); kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START); diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index e617bd600794..f62ae3d42232 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -180,9 +180,10 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, struct dma_async_tx_descriptor *desc; struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); + i2c->addr_data = i2c_8bit_addr_from_msg(msg); + if (msg->flags & I2C_M_RD) { i2c->dma_read = true; - i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_READ; /* * SELECT command. @@ -240,7 +241,6 @@ static int mxs_i2c_dma_setup_xfer(struct i2c_adapter *adap, } } else { i2c->dma_read = false; - i2c->addr_data = (msg->addr << 1) | I2C_SMBUS_WRITE; /* * WRITE command. @@ -371,7 +371,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, uint32_t flags) { struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap); - uint32_t addr_data = msg->addr << 1; + uint32_t addr_data = i2c_8bit_addr_from_msg(msg); uint32_t data = 0; int i, ret, xlen = 0, xmit = 0; uint32_t start; @@ -411,8 +411,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, */ BUG_ON(msg->len > 4); - addr_data |= I2C_SMBUS_READ; - /* SELECT command. */ mxs_i2c_pio_trigger_write_cmd(i2c, MXS_CMD_I2C_SELECT, addr_data); @@ -450,7 +448,6 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap, * fast enough. It is possible to transfer arbitrary amount * of data using PIO write. */ - addr_data |= I2C_SMBUS_WRITE; /* * The LSB of data buffer is the first byte blasted across diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index d7da9adf7ee1..c214e29cb19b 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -222,10 +222,7 @@ static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) i2c->nmsgs = num; i2c->state = STATE_START; - oc_setreg(i2c, OCI2C_DATA, - (i2c->msg->addr << 1) | - ((i2c->msg->flags & I2C_M_RD) ? 1:0)); - + oc_setreg(i2c, OCI2C_DATA, i2c_8bit_addr_from_msg(i2c->msg)); oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) || diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index df1dbc92a024..55fd5c6f3cca 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -121,7 +121,7 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter, read = msg->flags & I2C_M_RD ? 1 : 0; - TXFIFO_WR(smbus, MTXFIFO_START | (msg->addr << 1) | read); + TXFIFO_WR(smbus, MTXFIFO_START | i2c_8bit_addr_from_msg(msg)); if (read) { TXFIFO_WR(smbus, msg->len | MTXFIFO_READ | diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index c1bbeaae2095..4f793b5d0c3b 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -462,7 +462,7 @@ static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) { struct qup_i2c_block *blk = &qup->blk; struct i2c_msg *msg = qup->msg; - u32 addr = msg->addr << 1; + u32 addr = i2c_8bit_addr_from_msg(msg); u32 qup_tag; int idx; u32 val; diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index 9d8d5b91220f..5e310efd9446 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -329,7 +329,7 @@ static void rcar_i2c_prepare_msg(struct rcar_i2c_priv *priv) if (priv->msgs_left == 1) priv->flags |= ID_LAST_MSG; - rcar_i2c_write(priv, ICMAR, (priv->msg->addr << 1) | read); + rcar_i2c_write(priv, ICMAR, i2c_8bit_addr_from_msg(priv->msg)); /* * We don't have a test case but the HW engineers say that the write order * of ICMSR and ICMCR depends on whether we issue START or REP_START. Since diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index 95c2f1ce3cad..5f1fca7880b1 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -167,15 +167,14 @@ static irqreturn_t riic_tdre_isr(int irq, void *data) return IRQ_NONE; if (riic->bytes_left == RIIC_INIT_MSG) { - val = !!(riic->msg->flags & I2C_M_RD); - if (val) + if (riic->msg->flags & I2C_M_RD) /* On read, switch over to receive interrupt */ riic_clear_set_bit(riic, ICIER_TIE, ICIER_RIE, RIIC_ICIER); else /* On write, initialize length */ riic->bytes_left = riic->msg->len; - val |= (riic->msg->addr << 1); + val = i2c_8bit_addr_from_msg(riic->msg); } else { val = *riic->buf; riic->buf++; diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index dc63236b45b2..e866c481bfc3 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -602,20 +602,24 @@ static int stu300_send_address(struct stu300_dev *dev, u32 val; int ret; - if (msg->flags & I2C_M_TEN) + if (msg->flags & I2C_M_TEN) { /* This is probably how 10 bit addresses look */ val = (0xf0 | (((u32) msg->addr & 0x300) >> 7)) & I2C_DR_D_MASK; - else - val = ((msg->addr << 1) & I2C_DR_D_MASK); + if (msg->flags & I2C_M_RD) + /* This is the direction bit */ + val |= 0x01; + } else { + val = i2c_8bit_addr_from_msg(msg); + } - if (msg->flags & I2C_M_RD) { - /* This is the direction bit */ - val |= 0x01; - if (resend) + if (resend) { + if (msg->flags & I2C_M_RD) dev_dbg(&dev->pdev->dev, "read resend\n"); - } else if (resend) - dev_dbg(&dev->pdev->dev, "write resend\n"); + else + dev_dbg(&dev->pdev->dev, "write resend\n"); + } + stu300_wr8(val, dev->virtbase + I2C_DR); /* For 10bit addressing, await 10bit request (EVENT 9) */ diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index e3161fe048eb..9a71e50d21f1 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -143,12 +143,6 @@ struct xiic_i2c { #define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS) -/* The following constants are used with the following macros to specify the - * operation, a read or write operation. - */ -#define XIIC_READ_OPERATION 1 -#define XIIC_WRITE_OPERATION 0 - /* * Tx Fifo upper bit masks. */ @@ -556,8 +550,7 @@ static void xiic_start_recv(struct xiic_i2c *i2c) if (!(msg->flags & I2C_M_NOSTART)) /* write the address */ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, - (msg->addr << 1) | XIIC_READ_OPERATION | - XIIC_TX_DYN_START_MASK); + i2c_8bit_addr_from_msg(msg) | XIIC_TX_DYN_START_MASK); xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK); @@ -585,7 +578,7 @@ static void xiic_start_send(struct xiic_i2c *i2c) if (!(msg->flags & I2C_M_NOSTART)) { /* write the address */ - u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION | + u16 data = i2c_8bit_addr_from_msg(msg) | XIIC_TX_DYN_START_MASK; if ((i2c->nmsgs == 1) && msg->len == 0) /* no data and last message -> add STOP */ |