summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig20
-rw-r--r--drivers/hwmon/lm75.c90
2 files changed, 64 insertions, 46 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 00ff53348491..86289c283dc8 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -394,13 +394,19 @@ config SENSORS_LM75
tristate "National Semiconductor LM75 and compatibles"
depends on I2C
help
- If you say yes here you get support for National Semiconductor LM75
- sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
- 9-bit precision mode), and TelCom (now Microchip) TCN75.
-
- The DS75 and DS1775 in 10- to 12-bit precision modes will require
- a force module parameter. The driver will not handle the extra
- precision anyhow.
+ If you say yes here you get support for one common type of
+ temperature sensor chip, with models including:
+
+ - Dallas Semiconductor DS75 and DS1775
+ - Maxim MAX6625 and MAX6626
+ - Microchip MCP980x
+ - National Semiconductor LM75
+ - NXP's LM75A
+ - ST Microelectronics STDS75
+ - TelCom (now Microchip) TCN75
+ - Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275
+
+ Most of these chips will require a "force" module parameter.
This driver can also be built as a module. If so, the module
will be called lm75.
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index de698dc73020..25ed26584100 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -30,14 +30,19 @@
#include "lm75.h"
-/* Addresses to scan */
+/*
+ * This driver handles the LM75 and compatible digital temperature sensors.
+ * Compatibles include at least the DS75, DS1775, MCP980x, STDS75, TCN75,
+ * TMP100, TMP101, TMP75, TMP175, and TMP275.
+ */
+
+/* Addresses scanned by legacy style driver binding */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c,
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
-/* Insmod parameters */
+/* Insmod parameters (only for legacy style driver binding) */
I2C_CLIENT_INSMOD_1(lm75);
-/* Many LM75 constants specified below */
/* The LM75 registers */
#define LM75_REG_CONF 0x01
@@ -50,9 +55,9 @@ static const u8 LM75_REG_TEMP[3] = {
/* Each client has this additional data */
struct lm75_data {
struct i2c_client client;
- struct device *hwmon_dev;
+ struct device *hwmon_dev;
struct mutex update_lock;
- char valid; /* !=0 if following fields are valid */
+ char valid; /* !=0 if registers are valid */
unsigned long last_updated; /* In jiffies */
u16 temp[3]; /* Register values,
0 = input
@@ -60,23 +65,15 @@ struct lm75_data {
2 = hyst */
};
-static int lm75_attach_adapter(struct i2c_adapter *adapter);
-static int lm75_detect(struct i2c_adapter *adapter, int address, int kind);
static void lm75_init_client(struct i2c_client *client);
-static int lm75_detach_client(struct i2c_client *client);
static int lm75_read_value(struct i2c_client *client, u8 reg);
static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct lm75_data *lm75_update_device(struct device *dev);
-/* This is the driver that will be inserted */
-static struct i2c_driver lm75_driver = {
- .driver = {
- .name = "lm75",
- },
- .attach_adapter = lm75_attach_adapter,
- .detach_client = lm75_detach_client,
-};
+/*-----------------------------------------------------------------------*/
+
+/* sysfs attributes for hwmon */
static ssize_t show_temp(struct device *dev, struct device_attribute *da,
char *buf)
@@ -109,13 +106,6 @@ static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
show_temp, set_temp, 2);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
-static int lm75_attach_adapter(struct i2c_adapter *adapter)
-{
- if (!(adapter->class & I2C_CLASS_HWMON))
- return 0;
- return i2c_probe(adapter, &addr_data, lm75_detect);
-}
-
static struct attribute *lm75_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -128,6 +118,12 @@ static const struct attribute_group lm75_group = {
.attrs = lm75_attributes,
};
+/*-----------------------------------------------------------------------*/
+
+/* "Legacy" I2C driver binding */
+
+static struct i2c_driver lm75_driver;
+
/* This function is called by i2c_probe */
static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
{
@@ -135,15 +131,14 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
struct i2c_client *new_client;
struct lm75_data *data;
int err = 0;
- const char *name = "";
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
goto exit;
- /* OK. For now, we presume we have a valid client. We now create the
- client structure, even though we cannot fill it completely yet.
- But it allows us to access lm75_{read,write}_value. */
+ /* OK. For now, we presume we have a valid address. We create the
+ client structure, even though there may be no sensor present.
+ But it allows us to use i2c_smbus_read_*_data() calls. */
if (!(data = kzalloc(sizeof(struct lm75_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
@@ -174,17 +169,17 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
|| i2c_smbus_read_word_data(new_client, 5) != hyst
|| i2c_smbus_read_word_data(new_client, 6) != hyst
|| i2c_smbus_read_word_data(new_client, 7) != hyst)
- goto exit_free;
+ goto exit_free;
os = i2c_smbus_read_word_data(new_client, 3);
if (i2c_smbus_read_word_data(new_client, 4) != os
|| i2c_smbus_read_word_data(new_client, 5) != os
|| i2c_smbus_read_word_data(new_client, 6) != os
|| i2c_smbus_read_word_data(new_client, 7) != os)
- goto exit_free;
+ goto exit_free;
/* Unused bits */
if (conf & 0xe0)
- goto exit_free;
+ goto exit_free;
/* Addresses cycling */
for (i = 8; i < 0xff; i += 8)
@@ -194,16 +189,10 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
goto exit_free;
}
- /* Determine the chip type - only one kind supported! */
- if (kind <= 0)
- kind = lm75;
-
- if (kind == lm75) {
- name = "lm75";
- }
+ /* NOTE: we treat "force=..." and "force_lm75=..." the same. */
+ strlcpy(new_client->name, "lm75", I2C_NAME_SIZE);
/* Fill in the remaining client fields and put it into the global list */
- strlcpy(new_client->name, name, I2C_NAME_SIZE);
data->valid = 0;
mutex_init(&data->update_lock);
@@ -213,7 +202,7 @@ static int lm75_detect(struct i2c_adapter *adapter, int address, int kind)
/* Initialize the LM75 chip */
lm75_init_client(new_client);
-
+
/* Register sysfs hooks */
if ((err = sysfs_create_group(&new_client->dev.kobj, &lm75_group)))
goto exit_detach;
@@ -236,6 +225,13 @@ exit:
return err;
}
+static int lm75_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_probe(adapter, &addr_data, lm75_detect);
+}
+
static int lm75_detach_client(struct i2c_client *client)
{
struct lm75_data *data = i2c_get_clientdata(client);
@@ -246,6 +242,18 @@ static int lm75_detach_client(struct i2c_client *client)
return 0;
}
+static struct i2c_driver lm75_driver = {
+ .driver = {
+ .name = "lm75",
+ },
+ .attach_adapter = lm75_attach_adapter,
+ .detach_client = lm75_detach_client,
+};
+
+/*-----------------------------------------------------------------------*/
+
+/* register access */
+
/* All registers are word-sized, except for the configuration register.
LM75 uses a high-byte first convention, which is exactly opposite to
the SMBus standard. */
@@ -309,6 +317,10 @@ static struct lm75_data *lm75_update_device(struct device *dev)
return data;
}
+/*-----------------------------------------------------------------------*/
+
+/* module glue */
+
static int __init sensors_lm75_init(void)
{
return i2c_add_driver(&lm75_driver);
OpenPOWER on IntegriCloud