diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/hwmon/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/hwmon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hwmon/ab8500.c | 206 | ||||
| -rw-r--r-- | drivers/hwmon/abx500.c | 491 | ||||
| -rw-r--r-- | drivers/hwmon/abx500.h | 69 |
5 files changed, 780 insertions, 0 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 89ac1cb26f24..108e0c11c7a3 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -39,6 +39,19 @@ config HWMON_DEBUG_CHIP comment "Native drivers" +config SENSORS_AB8500 + tristate "AB8500 thermal monitoring" + depends on AB8500_GPADC && AB8500_BM + default n + help + If you say yes here you get support for the thermal sensor part + of the AB8500 chip. The driver includes thermal management for + AB8500 die and two GPADC channels. The GPADC channel are preferably + used to access sensors outside the AB8500 chip. + + This driver can also be built as a module. If so, the module + will be called abx500-temp. + config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && DMI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 8d6d97ea7c1e..526a37db9528 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_W83795) += w83795.o obj-$(CONFIG_SENSORS_W83781D) += w83781d.o obj-$(CONFIG_SENSORS_W83791D) += w83791d.o +obj-$(CONFIG_SENSORS_AB8500) += abx500.o ab8500.o obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o obj-$(CONFIG_SENSORS_AD7314) += ad7314.o diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c new file mode 100644 index 000000000000..d844dc806853 --- /dev/null +++ b/drivers/hwmon/ab8500.c @@ -0,0 +1,206 @@ +/* + * Copyright (C) ST-Ericsson 2010 - 2013 + * Author: Martin Persson <martin.persson@stericsson.com> + * Hongbo Zhang <hongbo.zhang@linaro.org> + * License Terms: GNU General Public License v2 + * + * When the AB8500 thermal warning temperature is reached (threshold cannot + * be changed by SW), an interrupt is set, and if no further action is taken + * within a certain time frame, pm_power off will be called. + * + * When AB8500 thermal shutdown temperature is reached a hardware shutdown of + * the AB8500 will occur. + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500-bm.h> +#include <linux/mfd/abx500/ab8500-gpadc.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/power/ab8500.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include "abx500.h" + +#define DEFAULT_POWER_OFF_DELAY (HZ * 10) +#define THERMAL_VCC 1800 +#define PULL_UP_RESISTOR 47000 +/* Number of monitored sensors should not greater than NUM_SENSORS */ +#define NUM_MONITORED_SENSORS 4 + +struct ab8500_gpadc_cfg { + const struct abx500_res_to_temp *temp_tbl; + int tbl_sz; + int vcc; + int r_up; +}; + +struct ab8500_temp { + struct ab8500_gpadc *gpadc; + struct ab8500_btemp *btemp; + struct delayed_work power_off_work; + struct ab8500_gpadc_cfg cfg; + struct abx500_temp *abx500_data; +}; + +/* + * The hardware connection is like this: + * VCC----[ R_up ]-----[ NTC ]----GND + * where R_up is pull-up resistance, and GPADC measures voltage on NTC. + * and res_to_temp table is strictly sorted by falling resistance values. + */ +static int ab8500_voltage_to_temp(struct ab8500_gpadc_cfg *cfg, + int v_ntc, int *temp) +{ + int r_ntc, i = 0, tbl_sz = cfg->tbl_sz; + const struct abx500_res_to_temp *tbl = cfg->temp_tbl; + + if (cfg->vcc < 0 || v_ntc >= cfg->vcc) + return -EINVAL; + + r_ntc = v_ntc * cfg->r_up / (cfg->vcc - v_ntc); + if (r_ntc > tbl[0].resist || r_ntc < tbl[tbl_sz - 1].resist) + return -EINVAL; + + while (!(r_ntc <= tbl[i].resist && r_ntc > tbl[i + 1].resist) && + i < tbl_sz - 2) + i++; + + /* return milli-Celsius */ + *temp = tbl[i].temp * 1000 + ((tbl[i + 1].temp - tbl[i].temp) * 1000 * + (r_ntc - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist); + + return 0; +} + +static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp) +{ + int voltage, ret; + struct ab8500_temp *ab8500_data = data->plat_data; + + if (sensor == BAT_CTRL) { + *temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp); + } else if (sensor == BTEMP_BALL) { + *temp = ab8500_btemp_get_temp(ab8500_data->btemp); + } else { + voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor); + if (voltage < 0) + return voltage; + + ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp); + if (ret < 0) + return ret; + } + + return 0; +} + +static void ab8500_thermal_power_off(struct work_struct *work) +{ + struct ab8500_temp *ab8500_data = container_of(work, + struct ab8500_temp, power_off_work.work); + struct abx500_temp *abx500_data = ab8500_data->abx500_data; + + dev_warn(&abx500_data->pdev->dev, "Power off due to critical temp\n"); + + pm_power_off(); +} + +static ssize_t ab8500_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "ab8500\n"); +} + +static ssize_t ab8500_show_label(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + char *label; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int index = attr->index; + + switch (index) { + case 1: + label = "ext_adc1"; + break; + case 2: + label = "ext_adc2"; + break; + case 3: + label = "bat_temp"; + break; + case 4: + label = "bat_ctrl"; + break; + default: + return -EINVAL; + } + + return sprintf(buf, "%s\n", label); +} + +static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data) +{ + struct ab8500_temp *ab8500_data = data->plat_data; + + dev_warn(&data->pdev->dev, "Power off in %d s\n", + DEFAULT_POWER_OFF_DELAY / HZ); + + schedule_delayed_work(&ab8500_data->power_off_work, + DEFAULT_POWER_OFF_DELAY); + return 0; +} + +int abx500_hwmon_init(struct abx500_temp *data) +{ + struct ab8500_temp *ab8500_data; + + ab8500_data = devm_kzalloc(&data->pdev->dev, sizeof(*ab8500_data), + GFP_KERNEL); + if (!ab8500_data) + return -ENOMEM; + + ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0"); + if (IS_ERR(ab8500_data->gpadc)) + return PTR_ERR(ab8500_data->gpadc); + + ab8500_data->btemp = ab8500_btemp_get(); + if (IS_ERR(ab8500_data->btemp)) + return PTR_ERR(ab8500_data->btemp); + + INIT_DELAYED_WORK(&ab8500_data->power_off_work, + ab8500_thermal_power_off); + + ab8500_data->cfg.vcc = THERMAL_VCC; + ab8500_data->cfg.r_up = PULL_UP_RESISTOR; + ab8500_data->cfg.temp_tbl = ab8500_temp_tbl_a_thermistor; + ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size; + + data->plat_data = ab8500_data; + + /* + * ADC_AUX1 and ADC_AUX2, connected to external NTC + * BTEMP_BALL and BAT_CTRL, fixed usage + */ + data->gpadc_addr[0] = ADC_AUX1; + data->gpadc_addr[1] = ADC_AUX2; + data->gpadc_addr[2] = BTEMP_BALL; + data->gpadc_addr[3] = BAT_CTRL; + data->monitored_sensors = NUM_MONITORED_SENSORS; + + data->ops.read_sensor = ab8500_read_sensor; + data->ops.irq_handler = ab8500_temp_irq_handler; + data->ops.show_name = ab8500_show_name; + data->ops.show_label = ab8500_show_label; + data->ops.is_visible = NULL; + + return 0; +} +EXPORT_SYMBOL(abx500_hwmon_init); + +MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@linaro.org>"); +MODULE_DESCRIPTION("AB8500 temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c new file mode 100644 index 000000000000..b4ad87b31a37 --- /dev/null +++ b/drivers/hwmon/abx500.c @@ -0,0 +1,491 @@ +/* + * Copyright (C) ST-Ericsson 2010 - 2013 + * Author: Martin Persson <martin.persson@stericsson.com> + * Hongbo Zhang <hongbo.zhang@linaro.org> + * License Terms: GNU General Public License v2 + * + * ABX500 does not provide auto ADC, so to monitor the required temperatures, + * a periodic work is used. It is more important to not wake up the CPU than + * to perform this job, hence the use of a deferred delay. + * + * A deferred delay for thermal monitor is considered safe because: + * If the chip gets too hot during a sleep state it's most likely due to + * external factors, such as the surrounding temperature. I.e. no SW decisions + * will make any difference. + */ + +#include <linux/err.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/workqueue.h> +#include "abx500.h" + +#define DEFAULT_MONITOR_DELAY HZ +#define DEFAULT_MAX_TEMP 130 + +static inline void schedule_monitor(struct abx500_temp *data) +{ + data->work_active = true; + schedule_delayed_work(&data->work, DEFAULT_MONITOR_DELAY); +} + +static void threshold_updated(struct abx500_temp *data) +{ + int i; + for (i = 0; i < data->monitored_sensors; i++) + if (data->max[i] != 0 || data->min[i] != 0) { + schedule_monitor(data); + return; + } + + dev_dbg(&data->pdev->dev, "No active thresholds.\n"); + cancel_delayed_work_sync(&data->work); + data->work_active = false; +} + +static void gpadc_monitor(struct work_struct *work) +{ + int temp, i, ret; + char alarm_node[30]; + bool updated_min_alarm, updated_max_alarm; + struct abx500_temp *data; + + data = container_of(work, struct abx500_temp, work.work); + mutex_lock(&data->lock); + + for (i = 0; i < data->monitored_sensors; i++) { + /* Thresholds are considered inactive if set to 0 */ + if (data->max[i] == 0 && data->min[i] == 0) + continue; + + if (data->max[i] < data->min[i]) + continue; + + ret = data->ops.read_sensor(data, data->gpadc_addr[i], &temp); + if (ret < 0) { + dev_err(&data->pdev->dev, "GPADC read failed\n"); + continue; + } + + updated_min_alarm = false; + updated_max_alarm = false; + + if (data->min[i] != 0) { + if (temp < data->min[i]) { + if (data->min_alarm[i] == false) { + data->min_alarm[i] = true; + updated_min_alarm = true; + } + } else { + if (data->min_alarm[i] == true) { + data->min_alarm[i] = false; + updated_min_alarm = true; + } + } + } + if (data->max[i] != 0) { + if (temp > data->max[i]) { + if (data->max_alarm[i] == false) { + data->max_alarm[i] = true; + updated_max_alarm = true; + } + } else if (temp < data->max[i] - data->max_hyst[i]) { + if (data->max_alarm[i] == true) { + data->max_alarm[i] = false; + updated_max_alarm = true; + } + } + } + + if (updated_min_alarm) { + ret = sprintf(alarm_node, "temp%d_min_alarm", i + 1); + sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); + } + if (updated_max_alarm) { + ret = sprintf(alarm_node, "temp%d_max_alarm", i + 1); + sysfs_notify(&data->pdev->dev.kobj, NULL, alarm_node); + } + } + + schedule_monitor(data); + mutex_unlock(&data->lock); +} + +/* HWMON sysfs interfaces */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + /* Show chip name */ + return data->ops.show_name(dev, devattr, buf); +} + +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + /* Show each sensor label */ + return data->ops.show_label(dev, devattr, buf); +} + +static ssize_t show_input(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int ret, temp; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + u8 gpadc_addr = data->gpadc_addr[attr->index]; + + ret = data->ops.read_sensor(data, gpadc_addr, &temp); + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", temp); +} + +/* Set functions (RW nodes) */ +static ssize_t set_min(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = kstrtol(buf, 10, &val); + if (res < 0) + return res; + + val = clamp_val(val, 0, DEFAULT_MAX_TEMP); + + mutex_lock(&data->lock); + data->min[attr->index] = val; + threshold_updated(data); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_max(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = kstrtol(buf, 10, &val); + if (res < 0) + return res; + + val = clamp_val(val, 0, DEFAULT_MAX_TEMP); + + mutex_lock(&data->lock); + data->max[attr->index] = val; + threshold_updated(data); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_max_hyst(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long val; + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int res = kstrtoul(buf, 10, &val); + if (res < 0) + return res; + + val = clamp_val(val, 0, DEFAULT_MAX_TEMP); + + mutex_lock(&data->lock); + data->max_hyst[attr->index] = val; + threshold_updated(data); + mutex_unlock(&data->lock); + + return count; +} + +/* Show functions (RO nodes) */ +static ssize_t show_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%ld\n", data->min[attr->index]); +} + +static ssize_t show_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%ld\n", data->max[attr->index]); +} + +static ssize_t show_max_hyst(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%ld\n", data->max_hyst[attr->index]); +} + +static ssize_t show_min_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%d\n", data->min_alarm[attr->index]); +} + +static ssize_t show_max_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct abx500_temp *data = dev_get_drvdata(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "%d\n", data->max_alarm[attr->index]); +} + +static mode_t abx500_attrs_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct abx500_temp *data = dev_get_drvdata(dev); + + if (data->ops.is_visible) + return data->ops.is_visible(attr, n); + + return attr->mode; +} + +/* Chip name, required by hwmon */ +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* GPADC - SENSOR1 */ +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_min, set_min, 0); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_max, set_max, 0); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 0); +static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_min_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_max_alarm, NULL, 0); + +/* GPADC - SENSOR2 */ +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min, 1); +static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max, 1); +static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 1); +static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_min_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_max_alarm, NULL, 1); + +/* GPADC - SENSOR3 */ +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min, 2); +static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max, 2); +static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 2); +static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_min_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_max_alarm, NULL, 2); + +/* GPADC - SENSOR4 */ +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_label, NULL, 3); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_input, NULL, 3); +static SENSOR_DEVICE_ATTR(temp4_min, S_IWUSR | S_IRUGO, show_min, set_min, 3); +static SENSOR_DEVICE_ATTR(temp4_max, S_IWUSR | S_IRUGO, show_max, set_max, 3); +static SENSOR_DEVICE_ATTR(temp4_max_hyst, S_IWUSR | S_IRUGO, + show_max_hyst, set_max_hyst, 3); +static SENSOR_DEVICE_ATTR(temp4_min_alarm, S_IRUGO, show_min_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(temp4_max_alarm, S_IRUGO, show_max_alarm, NULL, 3); + +struct attribute *abx500_temp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_min.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, + + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp2_min.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, + + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + + &sensor_dev_attr_temp4_label.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp4_min.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp4_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp4_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp4_max_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group abx500_temp_group = { + .attrs = abx500_temp_attributes, + .is_visible = abx500_attrs_visible, +}; + +static irqreturn_t abx500_temp_irq_handler(int irq, void *irq_data) +{ + struct platform_device *pdev = irq_data; + struct abx500_temp *data = platform_get_drvdata(pdev); + + data->ops.irq_handler(irq, data); + return IRQ_HANDLED; +} + +static int setup_irqs(struct platform_device *pdev) +{ + int ret; + int irq = platform_get_irq_byname(pdev, "ABX500_TEMP_WARM"); + + if (irq < 0) { + dev_err(&pdev->dev, "Get irq by name failed\n"); + return irq; + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, + abx500_temp_irq_handler, IRQF_NO_SUSPEND, "abx500-temp", pdev); + if (ret < 0) + dev_err(&pdev->dev, "Request threaded irq failed (%d)\n", ret); + + return ret; +} + +static int abx500_temp_probe(struct platform_device *pdev) +{ + struct abx500_temp *data; + int err; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->pdev = pdev; + mutex_init(&data->lock); + + /* Chip specific initialization */ + err = abx500_hwmon_init(data); + if (err < 0 || !data->ops.read_sensor || !data->ops.show_name || + !data->ops.show_label) + return err; + + INIT_DEFERRABLE_WORK(&data->work, gpadc_monitor); + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &abx500_temp_group); + if (err < 0) { + dev_err(&pdev->dev, "Create sysfs group failed (%d)\n", err); + return err; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_sysfs_group; + } + + if (data->ops.irq_handler) { + err = setup_irqs(pdev); + if (err < 0) + goto exit_hwmon_reg; + } + return 0; + +exit_hwmon_reg: + hwmon_device_unregister(data->hwmon_dev); +exit_sysfs_group: + sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); + return err; +} + +static int abx500_temp_remove(struct platform_device *pdev) +{ + struct abx500_temp *data = platform_get_drvdata(pdev); + + cancel_delayed_work_sync(&data->work); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &abx500_temp_group); + + return 0; +} + +static int abx500_temp_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct abx500_temp *data = platform_get_drvdata(pdev); + + if (data->work_active) + cancel_delayed_work_sync(&data->work); + + return 0; +} + +static int abx500_temp_resume(struct platform_device *pdev) +{ + struct abx500_temp *data = platform_get_drvdata(pdev); + + if (data->work_active) + schedule_monitor(data); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id abx500_temp_match[] = { + { .compatible = "stericsson,abx500-temp" }, + {}, +}; +#endif + +static struct platform_driver abx500_temp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "abx500-temp", + .of_match_table = of_match_ptr(abx500_temp_match), + }, + .suspend = abx500_temp_suspend, + .resume = abx500_temp_resume, + .probe = abx500_temp_probe, + .remove = abx500_temp_remove, +}; + +module_platform_driver(abx500_temp_driver); + +MODULE_AUTHOR("Martin Persson <martin.persson@stericsson.com>"); +MODULE_DESCRIPTION("ABX500 temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/hwmon/abx500.h b/drivers/hwmon/abx500.h new file mode 100644 index 000000000000..9b295e684d0e --- /dev/null +++ b/drivers/hwmon/abx500.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) ST-Ericsson 2010 - 2013 + * License terms: GNU General Public License v2 + * Author: Martin Persson <martin.persson@stericsson.com> + * Hongbo Zhang <hongbo.zhang@linaro.com> + */ + +#ifndef _ABX500_H +#define _ABX500_H + +#define NUM_SENSORS 5 + +struct abx500_temp; + +/* + * struct abx500_temp_ops - abx500 chip specific ops + * @read_sensor: reads gpadc output + * @irq_handler: irq handler + * @show_name: hwmon device name + * @show_label: hwmon attribute label + * @is_visible: is attribute visible + */ +struct abx500_temp_ops { + int (*read_sensor)(struct abx500_temp *, u8, int *); + int (*irq_handler)(int, struct abx500_temp *); + ssize_t (*show_name)(struct device *, + struct device_attribute *, char *); + ssize_t (*show_label) (struct device *, + struct device_attribute *, char *); + int (*is_visible)(struct attribute *, int); +}; + +/* + * struct abx500_temp - representation of temp mon device + * @pdev: platform device + * @hwmon_dev: hwmon device + * @ops: abx500 chip specific ops + * @gpadc_addr: gpadc channel address + * @min: sensor temperature min value + * @max: sensor temperature max value + * @max_hyst: sensor temperature hysteresis value for max limit + * @min_alarm: sensor temperature min alarm + * @max_alarm: sensor temperature max alarm + * @work: delayed work scheduled to monitor temperature periodically + * @work_active: True if work is active + * @lock: mutex + * @monitored_sensors: number of monitored sensors + * @plat_data: private usage, usually points to platform specific data + */ +struct abx500_temp { + struct platform_device *pdev; + struct device *hwmon_dev; + struct abx500_temp_ops ops; + u8 gpadc_addr[NUM_SENSORS]; + unsigned long min[NUM_SENSORS]; + unsigned long max[NUM_SENSORS]; + unsigned long max_hyst[NUM_SENSORS]; + bool min_alarm[NUM_SENSORS]; + bool max_alarm[NUM_SENSORS]; + struct delayed_work work; + bool work_active; + struct mutex lock; + int monitored_sensors; + void *plat_data; +}; + +int abx500_hwmon_init(struct abx500_temp *data); + +#endif /* _ABX500_H */ |
