diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/i2c/busses/i2c-ocores.c | 14 | ||||
| -rw-r--r-- | drivers/i2c/i2c-core.c | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/mmc_spi.c | 4 | ||||
| -rw-r--r-- | drivers/net/ethoc.c | 8 | ||||
| -rw-r--r-- | drivers/of/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/of/Makefile | 1 | ||||
| -rw-r--r-- | drivers/of/of_pci.c | 92 | ||||
| -rw-r--r-- | drivers/rtc/rtc-cmos.c | 45 | ||||
| -rw-r--r-- | drivers/rtc/rtc-mrst.c | 13 | ||||
| -rw-r--r-- | drivers/spi/pxa2xx_spi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/pxa2xx_spi_pci.c | 2 | ||||
| -rw-r--r-- | drivers/spi/xilinx_spi.c | 6 |
12 files changed, 160 insertions, 35 deletions
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c index 61653f079671..1b46a9d9f907 100644 --- a/drivers/i2c/busses/i2c-ocores.c +++ b/drivers/i2c/busses/i2c-ocores.c @@ -330,9 +330,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev) i2c->adap = ocores_adapter; i2c_set_adapdata(&i2c->adap, i2c); i2c->adap.dev.parent = &pdev->dev; -#ifdef CONFIG_OF i2c->adap.dev.of_node = pdev->dev.of_node; -#endif /* add i2c adapter to i2c tree */ ret = i2c_add_adapter(&i2c->adap); @@ -390,15 +388,11 @@ static int ocores_i2c_resume(struct platform_device *pdev) #define ocores_i2c_resume NULL #endif -#ifdef CONFIG_OF static struct of_device_id ocores_i2c_match[] = { - { - .compatible = "opencores,i2c-ocores", - }, - {}, + { .compatible = "opencores,i2c-ocores", }, + {}, }; MODULE_DEVICE_TABLE(of, ocores_i2c_match); -#endif /* work with hotplug and coldplug */ MODULE_ALIAS("platform:ocores-i2c"); @@ -411,9 +405,7 @@ static struct platform_driver ocores_i2c_driver = { .driver = { .owner = THIS_MODULE, .name = "ocores-i2c", -#ifdef CONFIG_OF - .of_match_table = ocores_i2c_match, -#endif + .of_match_table = ocores_i2c_match, }, }; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index f0bd5bcdf563..045ba6efea48 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -537,9 +537,7 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.parent = &client->adapter->dev; client->dev.bus = &i2c_bus_type; client->dev.type = &i2c_client_type; -#ifdef CONFIG_OF client->dev.of_node = info->of_node; -#endif dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap), client->addr); diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index fd877f633dd2..2f7fc0c5146f 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1516,21 +1516,17 @@ static int __devexit mmc_spi_remove(struct spi_device *spi) return 0; } -#if defined(CONFIG_OF) static struct of_device_id mmc_spi_of_match_table[] __devinitdata = { { .compatible = "mmc-spi-slot", }, {}, }; -#endif static struct spi_driver mmc_spi_driver = { .driver = { .name = "mmc_spi", .bus = &spi_bus_type, .owner = THIS_MODULE, -#if defined(CONFIG_OF) .of_match_table = mmc_spi_of_match_table, -#endif }, .probe = mmc_spi_probe, .remove = __devexit_p(mmc_spi_remove), diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c index b79d7e1555d5..db0290f05bdf 100644 --- a/drivers/net/ethoc.c +++ b/drivers/net/ethoc.c @@ -1163,15 +1163,11 @@ static int ethoc_resume(struct platform_device *pdev) # define ethoc_resume NULL #endif -#ifdef CONFIG_OF static struct of_device_id ethoc_match[] = { - { - .compatible = "opencores,ethoc", - }, + { .compatible = "opencores,ethoc", }, {}, }; MODULE_DEVICE_TABLE(of, ethoc_match); -#endif static struct platform_driver ethoc_driver = { .probe = ethoc_probe, @@ -1181,9 +1177,7 @@ static struct platform_driver ethoc_driver = { .driver = { .name = "ethoc", .owner = THIS_MODULE, -#ifdef CONFIG_OF .of_match_table = ethoc_match, -#endif }, }; diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 3c6e100a3ad0..d06a6374ed6c 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -69,4 +69,10 @@ config OF_MDIO help OpenFirmware MDIO bus (Ethernet PHY) accessors +config OF_PCI + def_tristate PCI + depends on PCI && (PPC || MICROBLAZE || X86) + help + OpenFirmware PCI bus accessors + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 3ab21a0a4907..f7861ed2f287 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_OF_I2C) += of_i2c.o obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SPI) += of_spi.o obj-$(CONFIG_OF_MDIO) += of_mdio.o +obj-$(CONFIG_OF_PCI) += of_pci.o diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c new file mode 100644 index 000000000000..ac1ec54e4fd5 --- /dev/null +++ b/drivers/of/of_pci.c @@ -0,0 +1,92 @@ +#include <linux/kernel.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <asm/prom.h> + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + __be32 lspec_be; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = pci_swizzle_interrupt_pin(pdev, lspec); + pdev = ppdev; + } + + lspec_be = cpu_to_be32(lspec); + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index dc2a0ba969ce..911e75cdc125 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -37,6 +37,8 @@ #include <linux/mod_devicetable.h> #include <linux/log2.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_platform.h> /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */ #include <asm-generic/rtc.h> @@ -1057,6 +1059,47 @@ static struct pnp_driver cmos_pnp_driver = { #endif /* CONFIG_PNP */ +#ifdef CONFIG_OF +static const struct of_device_id of_cmos_match[] = { + { + .compatible = "motorola,mc146818", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, of_cmos_match); + +static __init void cmos_of_init(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct rtc_time time; + int ret; + const __be32 *val; + + if (!node) + return; + + val = of_get_property(node, "ctrl-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_CONTROL); + + val = of_get_property(node, "freq-reg", NULL); + if (val) + CMOS_WRITE(be32_to_cpup(val), RTC_FREQ_SELECT); + + get_rtc_time(&time); + ret = rtc_valid_tm(&time); + if (ret) { + struct rtc_time def_time = { + .tm_year = 1, + .tm_mday = 1, + }; + set_rtc_time(&def_time); + } +} +#else +static inline void cmos_of_init(struct platform_device *pdev) {} +#define of_cmos_match NULL +#endif /*----------------------------------------------------------------*/ /* Platform setup should have set up an RTC device, when PNP is @@ -1065,6 +1108,7 @@ static struct pnp_driver cmos_pnp_driver = { static int __init cmos_platform_probe(struct platform_device *pdev) { + cmos_of_init(pdev); cmos_wake_setup(&pdev->dev); return cmos_do_probe(&pdev->dev, platform_get_resource(pdev, IORESOURCE_IO, 0), @@ -1096,6 +1140,7 @@ static struct platform_driver cmos_platform_driver = { #ifdef CONFIG_PM .pm = &cmos_pm_ops, #endif + .of_match_table = of_cmos_match, } }; diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c index 4db96fa306fc..b86bc328463b 100644 --- a/drivers/rtc/rtc-mrst.c +++ b/drivers/rtc/rtc-mrst.c @@ -62,6 +62,17 @@ static inline int is_intr(u8 rtc_intr) return rtc_intr & RTC_IRQMASK; } +static inline unsigned char vrtc_is_updating(void) +{ + unsigned char uip; + unsigned long flags; + + spin_lock_irqsave(&rtc_lock, flags); + uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP); + spin_unlock_irqrestore(&rtc_lock, flags); + return uip; +} + /* * rtc_time's year contains the increment over 1900, but vRTC's YEAR * register can't be programmed to value larger than 0x64, so vRTC @@ -76,7 +87,7 @@ static int mrst_read_time(struct device *dev, struct rtc_time *time) { unsigned long flags; - if (rtc_is_updating()) + if (vrtc_is_updating()) mdelay(20); spin_lock_irqsave(&rtc_lock, flags); diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 95928833855b..a429b01d0285 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1557,9 +1557,7 @@ static int __devinit pxa2xx_spi_probe(struct platform_device *pdev) drv_data->ssp = ssp; master->dev.parent = &pdev->dev; -#ifdef CONFIG_OF master->dev.of_node = pdev->dev.of_node; -#endif /* the spi->mode bits understood by this driver: */ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c index 19752b09e155..378e504f89eb 100644 --- a/drivers/spi/pxa2xx_spi_pci.c +++ b/drivers/spi/pxa2xx_spi_pci.c @@ -89,9 +89,7 @@ static int __devinit ce4100_spi_probe(struct pci_dev *dev, goto err_nomem; pdev->dev.parent = &dev->dev; -#ifdef CONFIG_OF pdev->dev.of_node = dev->dev.of_node; -#endif ssp = &spi_info->ssp; ssp->phys_base = pci_resource_start(dev, 0); ssp->mmio_base = ioremap(phys_beg, phys_len); diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index 7adaef62a991..4d2c75df886c 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -351,14 +351,12 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id) return IRQ_HANDLED; } -#ifdef CONFIG_OF static const struct of_device_id xilinx_spi_of_match[] = { { .compatible = "xlnx,xps-spi-2.00.a", }, { .compatible = "xlnx,xps-spi-2.00.b", }, {} }; MODULE_DEVICE_TABLE(of, xilinx_spi_of_match); -#endif struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word) @@ -394,9 +392,7 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem, master->bus_num = bus_num; master->num_chipselect = num_cs; -#ifdef CONFIG_OF master->dev.of_node = dev->of_node; -#endif xspi->mem = *mem; xspi->irq = irq; @@ -539,9 +535,7 @@ static struct platform_driver xilinx_spi_driver = { .driver = { .name = XILINX_SPI_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_OF .of_match_table = xilinx_spi_of_match, -#endif }, }; |
