diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/thermal/of-thermal.c | 40 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_thermal_common.h | 2 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.c | 170 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu.h | 89 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.c | 104 | ||||
| -rw-r--r-- | drivers/thermal/samsung/exynos_tmu_data.h | 54 | ||||
| -rw-r--r-- | drivers/thermal/thermal_core.c | 3 |
7 files changed, 129 insertions, 333 deletions
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index f8eb625b8400..62143ba31001 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -387,15 +387,18 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, int (*get_trend)(void *, long *)) { struct device_node *np, *child, *sensor_np; + struct thermal_zone_device *tzd = ERR_PTR(-ENODEV); np = of_find_node_by_name(NULL, "thermal-zones"); if (!np) return ERR_PTR(-ENODEV); - if (!dev || !dev->of_node) + if (!dev || !dev->of_node) { + of_node_put(np); return ERR_PTR(-EINVAL); + } - sensor_np = dev->of_node; + sensor_np = of_node_get(dev->of_node); for_each_child_of_node(np, child) { struct of_phandle_args sensor_specs; @@ -422,16 +425,21 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, } if (sensor_specs.np == sensor_np && id == sensor_id) { - of_node_put(np); - return thermal_zone_of_add_sensor(child, sensor_np, - data, - get_temp, - get_trend); + tzd = thermal_zone_of_add_sensor(child, sensor_np, + data, + get_temp, + get_trend); + of_node_put(sensor_specs.np); + of_node_put(child); + goto exit; } + of_node_put(sensor_specs.np); } +exit: + of_node_put(sensor_np); of_node_put(np); - return ERR_PTR(-ENODEV); + return tzd; } EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register); @@ -623,6 +631,7 @@ static int thermal_of_populate_trip(struct device_node *np, /* Required for cooling map matching */ trip->np = np; + of_node_get(np); return 0; } @@ -730,9 +739,14 @@ finish: return tz; free_tbps: + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); free_trips: + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); + of_node_put(gchild); free_tz: kfree(tz); of_node_put(child); @@ -742,7 +756,13 @@ free_tz: static inline void of_thermal_free_zone(struct __thermal_zone *tz) { + int i; + + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); kfree(tz); } @@ -814,10 +834,13 @@ int __init of_parse_thermal_zones(void) /* attempting to build remaining zones still */ } } + of_node_put(np); return 0; exit_free: + of_node_put(child); + of_node_put(np); of_thermal_free_zone(tz); /* no memory available, so free what we have built */ @@ -859,4 +882,5 @@ void of_thermal_destroy_zones(void) kfree(zone->ops); of_thermal_free_zone(zone->devdata); } + of_node_put(np); } diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 3eb2ed9ea3a4..158f5aa8dc5d 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,7 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_THRESHOLD_LEVS 5 +#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index acbff14da3a4..49c09243fd38 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -77,16 +77,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) struct exynos_tmu_platform_data *pdata = data->pdata; int temp_code; - if (pdata->cal_mode == HW_MODE) - return temp; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp should range between 25 and 125 */ - if (temp < 25 || temp > 125) { - temp_code = -EINVAL; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp_code = (temp - pdata->first_point_trim) * @@ -101,7 +91,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) temp_code = temp + pdata->default_temp_offset; break; } -out: + return temp_code; } @@ -114,16 +104,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) struct exynos_tmu_platform_data *pdata = data->pdata; int temp; - if (pdata->cal_mode == HW_MODE) - return temp_code; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp_code should range between 75 and 175 */ - if (temp_code < 75 || temp_code > 175) { - temp = -ENODATA; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp = (temp_code - data->temp_error1) * @@ -138,18 +118,35 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) temp = temp_code - pdata->default_temp_offset; break; } -out: + return temp; } +static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data) +{ + const struct exynos_tmu_registers *reg = data->pdata->registers; + unsigned int val_irq; + + val_irq = readl(data->base + reg->tmu_intstat); + /* + * Clear the interrupts. Please note that the documentation for + * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly + * states that INTCLEAR register has a different placing of bits + * responsible for FALL IRQs than INTSTAT register. Exynos5420 + * and Exynos5440 documentation is correct (Exynos4210 doesn't + * support FALL IRQs at all). + */ + writel(val_irq, data->base + reg->tmu_intclear); +} + static int exynos_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int status, trim_info = 0, con; + unsigned int status, trim_info = 0, con, ctrl; unsigned int rising_threshold = 0, falling_threshold = 0; - int ret = 0, threshold_code, i, trigger_levs = 0; + int ret = 0, threshold_code, i; mutex_lock(&data->lock); clk_enable(data->clk); @@ -164,11 +161,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } } - if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) - __raw_writel(1, data->base + reg->triminfo_ctrl); - - if (pdata->cal_mode == HW_MODE) - goto skip_calib_data; + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { + for (i = 0; i < reg->triminfo_ctrl_count; i++) { + if (pdata->triminfo_reload[i]) { + ctrl = readl(data->base + + reg->triminfo_ctrl[i]); + ctrl |= pdata->triminfo_reload[i]; + writel(ctrl, data->base + + reg->triminfo_ctrl[i]); + } + } + } /* Save trimming info in order to perform calibration */ if (data->soc == SOC_ARCH_EXYNOS5440) { @@ -197,7 +200,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev) trim_info = readl(data->base + reg->triminfo_data); } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; - data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & + data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK); if (!data->temp_error1 || @@ -207,67 +210,33 @@ static int exynos_tmu_initialize(struct platform_device *pdev) if (!data->temp_error2) data->temp_error2 = - (pdata->efuse_value >> reg->triminfo_85_shift) & + (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK; -skip_calib_data: - if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { - dev_err(&pdev->dev, "Invalid max trigger level\n"); - ret = -EINVAL; - goto out; - } - - for (i = 0; i < pdata->max_trigger_level; i++) { - if (!pdata->trigger_levels[i]) - continue; - - if ((pdata->trigger_type[i] == HW_TRIP) && - (!pdata->trigger_levels[pdata->max_trigger_level - 1])) { - dev_err(&pdev->dev, "Invalid hw trigger level\n"); - ret = -EINVAL; - goto out; - } - - /* Count trigger levels except the HW trip*/ - if (!(pdata->trigger_type[i] == HW_TRIP)) - trigger_levs++; - } - rising_threshold = readl(data->base + reg->threshold_th0); if (data->soc == SOC_ARCH_EXYNOS4210) { /* Write temperature code for threshold */ threshold_code = temp_to_code(data, pdata->threshold); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } writeb(threshold_code, data->base + reg->threshold_temp); - for (i = 0; i < trigger_levs; i++) + for (i = 0; i < pdata->non_hw_trigger_levels; i++) writeb(pdata->trigger_levels[i], data->base + reg->threshold_th0 + i * sizeof(reg->threshold_th0)); - writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); } else { /* Write temperature code for rising and falling threshold */ - for (i = 0; - i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { + for (i = 0; i < pdata->non_hw_trigger_levels; i++) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } rising_threshold &= ~(0xff << 8 * i); rising_threshold |= threshold_code << 8 * i; if (pdata->threshold_falling) { threshold_code = temp_to_code(data, pdata->trigger_levels[i] - pdata->threshold_falling); - if (threshold_code > 0) - falling_threshold |= - threshold_code << 8 * i; + falling_threshold |= threshold_code << 8 * i; } } @@ -276,9 +245,7 @@ skip_calib_data: writel(falling_threshold, data->base + reg->threshold_th1); - writel((reg->intclr_rise_mask << reg->intclr_rise_shift) | - (reg->intclr_fall_mask << reg->intclr_fall_shift), - data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); /* if last threshold limit is also present */ i = pdata->max_trigger_level - 1; @@ -286,10 +253,6 @@ skip_calib_data: (pdata->trigger_type[i] == HW_TRIP)) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { /* 1-4 level to be assigned in th0 reg */ rising_threshold &= ~(0xff << 8 * i); @@ -325,7 +288,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int con, interrupt_en, cal_val; + unsigned int con, interrupt_en; mutex_lock(&data->lock); clk_enable(data->clk); @@ -335,15 +298,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) if (pdata->test_mux) con |= (pdata->test_mux << reg->test_mux_addr_shift); - if (pdata->reference_voltage) { - con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); - con |= pdata->reference_voltage << reg->buf_vref_sel_shift; - } + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; - if (pdata->gain) { - con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); - con |= (pdata->gain << reg->buf_slope_sel_shift); - } + con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); + con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); if (pdata->noise_cancel_mode) { con &= ~(reg->therm_trip_mode_mask << @@ -351,29 +310,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); } - if (pdata->cal_mode == HW_MODE) { - con &= ~(reg->calib_mode_mask << reg->calib_mode_shift); - cal_val = 0; - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - cal_val = 3; - break; - case TYPE_ONE_POINT_TRIMMING_85: - cal_val = 2; - break; - case TYPE_ONE_POINT_TRIMMING_25: - cal_val = 1; - break; - case TYPE_NONE: - break; - default: - dev_err(&pdev->dev, "Invalid calibration type, using none\n"); - } - con |= cal_val << reg->calib_mode_shift; - } - if (on) { - con |= (1 << reg->core_en_shift); + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = pdata->trigger_enable[3] << reg->inten_rise3_shift | pdata->trigger_enable[2] << reg->inten_rise2_shift | @@ -383,7 +321,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) interrupt_en |= interrupt_en << reg->inten_fall0_shift; } else { - con &= ~(1 << reg->core_en_shift); + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ } writel(interrupt_en, data->base + reg->tmu_inten); @@ -404,8 +342,16 @@ static int exynos_tmu_read(struct exynos_tmu_data *data) clk_enable(data->clk); temp_code = readb(data->base + reg->tmu_cur_temp); - temp = code_to_temp(data, temp_code); + if (data->soc == SOC_ARCH_EXYNOS4210) + /* temp_code should range between 75 and 175 */ + if (temp_code < 75 || temp_code > 175) { + temp = -ENODATA; + goto out; + } + + temp = code_to_temp(data, temp_code); +out: clk_disable(data->clk); mutex_unlock(&data->lock); @@ -465,7 +411,7 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_data, irq_work); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int val_irq, val_type; + unsigned int val_type; if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); @@ -483,9 +429,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_enable(data->clk); /* TODO: take action based on particular interrupt */ - val_irq = readl(data->base + reg->tmu_intstat); - /* clear the interrupts */ - writel(val_irq, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); clk_disable(data->clk); mutex_unlock(&data->lock); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 1b4a6444ea61..c58c7663a3fe 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -34,11 +34,6 @@ enum calibration_type { TYPE_NONE, }; -enum calibration_mode { - SW_MODE, - HW_MODE, -}; - enum soc_type { SOC_ARCH_EXYNOS3250 = 1, SOC_ARCH_EXYNOS4210, @@ -82,46 +77,19 @@ enum soc_type { * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. * @triminfo_data: register containing 2 pont trimming data - * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg. - * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg. * @triminfo_ctrl: trim info controller register. - * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl - reg. + * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. - * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. - * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl - register. - * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl - register. - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl - register. - * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in - tmu_ctrl register. - * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. - * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp - register. * @threshold_temp: register containing the base threshold level. * @threshold_th0: Register containing first set of rising levels. - * @threshold_th0_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th0_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th0_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th0_l3_shift: shift bits of level3 threshold temperature. * @threshold_th1: Register containing second set of rising levels. - * @threshold_th1_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th1_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th1_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th1_l3_shift: shift bits of level3 threshold temperature. * @threshold_th2: Register containing third set of rising levels. - * @threshold_th2_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th3: Register containing fourth set of rising levels. * @threshold_th3_l0_shift: shift bits of level0 threshold temperature. * @tmu_inten: register containing the different threshold interrupt enable bits. @@ -130,68 +98,35 @@ enum soc_type { * @inten_rise2_shift: shift bits of rising 2 interrupt bits. * @inten_rise3_shift: shift bits of rising 3 interrupt bits. * @inten_fall0_shift: shift bits of falling 0 interrupt bits. - * @inten_fall1_shift: shift bits of falling 1 interrupt bits. - * @inten_fall2_shift: shift bits of falling 2 interrupt bits. - * @inten_fall3_shift: shift bits of falling 3 interrupt bits. * @tmu_intstat: Register containing the interrupt status values. * @tmu_intclear: Register for clearing the raised interrupt status. - * @intclr_fall_shift: shift bits for interrupt clear fall 0 - * @intclr_rise_shift: shift bits of all rising interrupt bits. - * @intclr_rise_mask: mask bits of all rising interrupt bits. - * @intclr_fall_mask: mask bits of all rising interrupt bits. * @emul_con: TMU emulation controller register. * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. - * @emul_time_mask: mask bits of emulation time. * @tmu_irqstatus: register to find which TMU generated interrupts. * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { u32 triminfo_data; - u32 triminfo_25_shift; - u32 triminfo_85_shift; - u32 triminfo_ctrl; - u32 triminfo_ctrl1; - u32 triminfo_reload_shift; + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; + u32 triminfo_ctrl_count; u32 tmu_ctrl; u32 test_mux_addr_shift; - u32 buf_vref_sel_shift; - u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; u32 therm_trip_mode_mask; u32 therm_trip_en_shift; - u32 buf_slope_sel_shift; - u32 buf_slope_sel_mask; - u32 calib_mode_shift; - u32 calib_mode_mask; - u32 therm_trip_tq_en_shift; - u32 core_en_shift; u32 tmu_status; u32 tmu_cur_temp; - u32 tmu_cur_temp_shift; u32 threshold_temp; u32 threshold_th0; - u32 threshold_th0_l0_shift; - u32 threshold_th0_l1_shift; - u32 threshold_th0_l2_shift; - u32 threshold_th0_l3_shift; - u32 threshold_th1; - u32 threshold_th1_l0_shift; - u32 threshold_th1_l1_shift; - u32 threshold_th1_l2_shift; - u32 threshold_th1_l3_shift; - u32 threshold_th2; - u32 threshold_th2_l0_shift; - - u32 threshold_th3; u32 threshold_th3_l0_shift; u32 tmu_inten; @@ -200,22 +135,14 @@ struct exynos_tmu_registers { u32 inten_rise2_shift; u32 inten_rise3_shift; u32 inten_fall0_shift; - u32 inten_fall1_shift; - u32 inten_fall2_shift; - u32 inten_fall3_shift; u32 tmu_intstat; u32 tmu_intclear; - u32 intclr_fall_shift; - u32 intclr_rise_shift; - u32 intclr_fall_mask; - u32 intclr_rise_mask; u32 emul_con; u32 emul_temp_shift; u32 emul_time_shift; - u32 emul_time_mask; u32 tmu_irqstatus; u32 tmu_pmin; @@ -250,11 +177,12 @@ struct exynos_tmu_registers { * 1 = enable trigger_level[] interrupt, * 0 = disable trigger_level[] interrupt * @max_trigger_level: max trigger level supported by the TMU + * @non_hw_trigger_levels: number of defined non-hardware trigger levels * @gain: gain of amplifier in the positive-TC generator block - * 0 <= gain <= 15 + * 0 < gain <= 15 * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block - * 0 <= reference_voltage <= 31 + * 0 < reference_voltage <= 31 * @noise_cancel_mode: noise cancellation mode * 000, 100, 101, 110 and 111 can be different modes * @type: determines the type of SOC @@ -265,8 +193,8 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX + * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature - * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. @@ -284,6 +212,7 @@ struct exynos_tmu_platform_data { enum trigger_type trigger_type[MAX_TRIP_COUNT]; bool trigger_enable[MAX_TRIP_COUNT]; u8 max_trigger_level; + u8 non_hw_trigger_levels; u8 gain; u8 reference_voltage; u8 noise_cancel_mode; @@ -295,9 +224,9 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; - enum calibration_mode cal_mode; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index aa8e0dee2055..2683d2897e90 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -27,14 +27,7 @@ #if defined(CONFIG_CPU_EXYNOS4210) static const struct exynos_tmu_registers exynos4210_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP, @@ -46,7 +39,6 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = { .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK, }; struct exynos_tmu_init_data const exynos4210_default_tmu_data = { @@ -64,6 +56,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { .trigger_type[1] = THROTTLE_ACTIVE, .trigger_type[2] = SW_TRIP, .max_trigger_level = 4, + .non_hw_trigger_levels = 3, .gain = 15, .reference_voltage = 7, .cal_type = TYPE_ONE_POINT_TRIMMING, @@ -93,18 +86,14 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS3250) static const struct exynos_tmu_registers exynos3250_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, + .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 2, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -116,14 +105,9 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS3250_TMU_DATA \ @@ -141,6 +125,7 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -160,8 +145,10 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ + .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos3250_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ TMU_SUPPORT_EMUL_TIME) #endif @@ -182,20 +169,13 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, - .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -208,14 +188,9 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS4412_TMU_DATA \ @@ -233,6 +208,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -252,6 +228,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ @@ -286,18 +263,11 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5260) static const struct exynos_tmu_registers exynos5260_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -310,14 +280,9 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK, .emul_con = EXYNOS5260_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5260_TMU_DATA \ @@ -335,6 +300,7 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -359,9 +325,8 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { #define EXYNOS5260_TMU_DATA \ __EXYNOS5260_TMU_DATA \ .type = SOC_ARCH_EXYNOS5260, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) struct exynos_tmu_init_data const exynos5260_default_tmu_data = { .tmu_data = { @@ -378,17 +343,10 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5420) static const struct exynos_tmu_registers exynos5420_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -402,14 +360,9 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5420_TMU_DATA \ @@ -427,6 +380,7 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -451,16 +405,15 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { #define EXYNOS5420_TMU_DATA \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5250, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) #define EXYNOS5420_TMU_DATA_SHARED \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \ + TMU_SUPPORT_ADDRESS_MULTIPLE) struct exynos_tmu_init_data const exynos5420_default_tmu_data = { .tmu_data = { @@ -477,19 +430,10 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5440) static const struct exynos_tmu_registers exynos5440_tmu_registers = { .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT, - .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, @@ -504,10 +448,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, - .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, @@ -521,11 +461,11 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .trigger_type[0] = SW_TRIP, \ .trigger_type[4] = HW_TRIP, \ .max_trigger_level = 5, \ + .non_hw_trigger_levels = 1, \ .gain = 5, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .cal_mode = 0, \ .efuse_value = 0x5b2d, \ .min_efuse_value = 16, \ .max_efuse_value = 76, \ diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index f0979e598491..65e2ea6a9579 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -39,55 +39,31 @@ #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 #define EXYNOS_TMU_CORE_EN_SHIFT 0 +/* Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON1 0x10 + /* Exynos4210 specific registers */ #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C - -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 -#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111 -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 - -/* Exynos5250 and Exynos4412 specific registers */ -#define EXYNOS_TMU_TRIMINFO_CON 0x14 + +/* Exynos5250, Exynos4412, Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON2 0x14 #define EXYNOS_THD_TEMP_RISE 0x50 #define EXYNOS_THD_TEMP_FALL 0x54 #define EXYNOS_EMUL_CON 0x80 -#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1 +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 #define EXYNOS_TRIMINFO_25_SHIFT 0 #define EXYNOS_TRIMINFO_85_SHIFT 8 -#define EXYNOS_TMU_RISE_INT_MASK 0x111 -#define EXYNOS_TMU_RISE_INT_SHIFT 0 -#define EXYNOS_TMU_FALL_INT_MASK 0x111 -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) -#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 -#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16 -#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 -#define EXYNOS_TMU_CALIB_MODE_SHIFT 4 -#define EXYNOS_TMU_CALIB_MODE_MASK 0x3 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 -#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20 -#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24 -#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28 #define EXYNOS_EMUL_TIME 0x57F0 #define EXYNOS_EMUL_TIME_MASK 0xffff @@ -103,10 +79,6 @@ #define EXYNOS5260_TMU_REG_INTEN 0xC0 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 -#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111 -#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16) -#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111 -#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111 #define EXYNOS5260_EMUL_CON 0x100 /* Exynos4412 specific */ @@ -122,29 +94,17 @@ #define EXYNOS5440_TMU_S0_7_TH0 0x110 #define EXYNOS5440_TMU_S0_7_TH1 0x130 #define EXYNOS5440_TMU_S0_7_TH2 0x150 -#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0 #define EXYNOS5440_TMU_S0_7_IRQEN 0x210 #define EXYNOS5440_TMU_S0_7_IRQ 0x230 /* exynos5440 common registers */ #define EXYNOS5440_TMU_IRQ_STATUS 0x000 #define EXYNOS5440_TMU_PMIN 0x004 -#define EXYNOS5440_TMU_TEMP 0x008 -#define EXYNOS5440_TMU_RISE_INT_MASK 0xf -#define EXYNOS5440_TMU_RISE_INT_SHIFT 0 -#define EXYNOS5440_TMU_FALL_INT_MASK 0xf #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 -#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5 -#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6 -#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7 -#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0 -#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8 -#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16 -#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24 #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 9bf10aa6069b..43b90709585f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1575,8 +1575,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, thermal_zone_device_update(tz); - if (!result) - return tz; + return tz; unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); |
