summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/acpi/acpi_memhotplug.c5
-rw-r--r--drivers/base/Makefile1
-rw-r--r--drivers/base/init.c2
-rw-r--r--drivers/base/memory.c452
-rw-r--r--drivers/md/dm-crypt.c12
-rw-r--r--drivers/net/wireless/airo.c7
-rw-r--r--drivers/pci/quirks.c4
-rw-r--r--drivers/scsi/ahci.c55
-rw-r--r--drivers/scsi/arm/scsi.h6
-rw-r--r--drivers/scsi/ata_piix.c15
-rw-r--r--drivers/scsi/libata-core.c90
-rw-r--r--drivers/scsi/libata-scsi.c46
-rw-r--r--drivers/scsi/libata.h2
-rw-r--r--drivers/scsi/pdc_adma.c26
-rw-r--r--drivers/scsi/sata_mv.c41
-rw-r--r--drivers/scsi/sata_nv.c3
-rw-r--r--drivers/scsi/sata_promise.c19
-rw-r--r--drivers/scsi/sata_qstor.c25
-rw-r--r--drivers/scsi/sata_sil.c7
-rw-r--r--drivers/scsi/sata_sil24.c41
-rw-r--r--drivers/scsi/sata_sis.c13
-rw-r--r--drivers/scsi/sata_svw.c3
-rw-r--r--drivers/scsi/sata_sx4.c13
-rw-r--r--drivers/scsi/sata_uli.c5
-rw-r--r--drivers/scsi/sata_via.c38
-rw-r--r--drivers/scsi/sata_vsc.c3
-rw-r--r--drivers/scsi/sg.c17
-rw-r--r--drivers/scsi/st.c10
-rw-r--r--drivers/usb/misc/usbtest.c7
29 files changed, 696 insertions, 272 deletions
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 01a1bd239263..2143609d2936 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -200,8 +200,7 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
* Note: Assume that this function returns zero on success
*/
result = add_memory(mem_device->start_addr,
- (mem_device->end_addr - mem_device->start_addr) + 1,
- mem_device->read_write_attribute);
+ (mem_device->end_addr - mem_device->start_addr) + 1);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "\nadd_memory failed\n"));
mem_device->state = MEMORY_INVALID_STATE;
@@ -259,7 +258,7 @@ static int acpi_memory_disable_device(struct acpi_memory_device *mem_device)
* Ask the VM to offline this memory range.
* Note: Assume that this function returns zero on success
*/
- result = remove_memory(start, len, attr);
+ result = remove_memory(start, len);
if (result) {
ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Hot-Remove failed.\n"));
return_VALUE(result);
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 66d9c4643fc1..f12898d53078 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -7,6 +7,7 @@ obj-y := core.o sys.o bus.o dd.o \
obj-y += power/
obj-$(CONFIG_FW_LOADER) += firmware_class.o
obj-$(CONFIG_NUMA) += node.o
+obj-$(CONFIG_MEMORY_HOTPLUG) += memory.o
ifeq ($(CONFIG_DEBUG_DRIVER),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/base/init.c b/drivers/base/init.c
index 84e604e25c4f..c648914b9cde 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/memory.h>
#include "base.h"
@@ -33,5 +34,6 @@ void __init driver_init(void)
platform_bus_init();
system_bus_init();
cpu_dev_init();
+ memory_dev_init();
attribute_container_init();
}
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
new file mode 100644
index 000000000000..b7ddd651d664
--- /dev/null
+++ b/drivers/base/memory.c
@@ -0,0 +1,452 @@
+/*
+ * drivers/base/memory.c - basic Memory class support
+ *
+ * Written by Matt Tolentino <matthew.e.tolentino@intel.com>
+ * Dave Hansen <haveblue@us.ibm.com>
+ *
+ * This file provides the necessary infrastructure to represent
+ * a SPARSEMEM-memory-model system's physical memory in /sysfs.
+ * All arch-independent code that assumes MEMORY_HOTPLUG requires
+ * SPARSEMEM should be contained here, or in mm/memory_hotplug.c.
+ */
+
+#include <linux/sysdev.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h> /* capable() */
+#include <linux/topology.h>
+#include <linux/device.h>
+#include <linux/memory.h>
+#include <linux/kobject.h>
+#include <linux/memory_hotplug.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <asm/uaccess.h>
+
+#define MEMORY_CLASS_NAME "memory"
+
+static struct sysdev_class memory_sysdev_class = {
+ set_kset_name(MEMORY_CLASS_NAME),
+};
+EXPORT_SYMBOL(memory_sysdev_class);
+
+static char *memory_hotplug_name(struct kset *kset, struct kobject *kobj)
+{
+ return MEMORY_CLASS_NAME;
+}
+
+static int memory_hotplug(struct kset *kset, struct kobject *kobj, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ int retval = 0;
+
+ return retval;
+}
+
+static struct kset_hotplug_ops memory_hotplug_ops = {
+ .name = memory_hotplug_name,
+ .hotplug = memory_hotplug,
+};
+
+static struct notifier_block *memory_chain;
+
+static int register_memory_notifier(struct notifier_block *nb)
+{
+ return notifier_chain_register(&memory_chain, nb);
+}
+
+static void unregister_memory_notifier(struct notifier_block *nb)
+{
+ notifier_chain_unregister(&memory_chain, nb);
+}
+
+/*
+ * register_memory - Setup a sysfs device for a memory block
+ */
+static int
+register_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ int error;
+
+ memory->sysdev.cls = &memory_sysdev_class;
+ memory->sysdev.id = __section_nr(section);
+
+ error = sysdev_register(&memory->sysdev);
+
+ if (root && !error)
+ error = sysfs_create_link(&root->sysdev.kobj,
+ &memory->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+
+ return error;
+}
+
+static void
+unregister_memory(struct memory_block *memory, struct mem_section *section,
+ struct node *root)
+{
+ BUG_ON(memory->sysdev.cls != &memory_sysdev_class);
+ BUG_ON(memory->sysdev.id != __section_nr(section));
+
+ sysdev_unregister(&memory->sysdev);
+ if (root)
+ sysfs_remove_link(&root->sysdev.kobj,
+ kobject_name(&memory->sysdev.kobj));
+}
+
+/*
+ * use this as the physical section index that this memsection
+ * uses.
+ */
+
+static ssize_t show_mem_phys_index(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%08lx\n", mem->phys_index);
+}
+
+/*
+ * online, offline, going offline, etc.
+ */
+static ssize_t show_mem_state(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ ssize_t len = 0;
+
+ /*
+ * We can probably put these states in a nice little array
+ * so that they're not open-coded
+ */
+ switch (mem->state) {
+ case MEM_ONLINE:
+ len = sprintf(buf, "online\n");
+ break;
+ case MEM_OFFLINE:
+ len = sprintf(buf, "offline\n");
+ break;
+ case MEM_GOING_OFFLINE:
+ len = sprintf(buf, "going-offline\n");
+ break;
+ default:
+ len = sprintf(buf, "ERROR-UNKNOWN-%ld\n",
+ mem->state);
+ WARN_ON(1);
+ break;
+ }
+
+ return len;
+}
+
+static inline int memory_notify(unsigned long val, void *v)
+{
+ return notifier_call_chain(&memory_chain, val, v);
+}
+
+/*
+ * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
+ * OK to have direct references to sparsemem variables in here.
+ */
+static int
+memory_block_action(struct memory_block *mem, unsigned long action)
+{
+ int i;
+ unsigned long psection;
+ unsigned long start_pfn, start_paddr;
+ struct page *first_page;
+ int ret;
+ int old_state = mem->state;
+
+ psection = mem->phys_index;
+ first_page = pfn_to_page(psection << PFN_SECTION_SHIFT);
+
+ /*
+ * The probe routines leave the pages reserved, just
+ * as the bootmem code does. Make sure they're still
+ * that way.
+ */
+ if (action == MEM_ONLINE) {
+ for (i = 0; i < PAGES_PER_SECTION; i++) {
+ if (PageReserved(first_page+i))
+ continue;
+
+ printk(KERN_WARNING "section number %ld page number %d "
+ "not reserved, was it already online? \n",
+ psection, i);
+ return -EBUSY;
+ }
+ }
+
+ switch (action) {
+ case MEM_ONLINE:
+ start_pfn = page_to_pfn(first_page);
+ ret = online_pages(start_pfn, PAGES_PER_SECTION);
+ break;
+ case MEM_OFFLINE:
+ mem->state = MEM_GOING_OFFLINE;
+ memory_notify(MEM_GOING_OFFLINE, NULL);
+ start_paddr = page_to_pfn(first_page) << PAGE_SHIFT;
+ ret = remove_memory(start_paddr,
+ PAGES_PER_SECTION << PAGE_SHIFT);
+ if (ret) {
+ mem->state = old_state;
+ break;
+ }
+ memory_notify(MEM_MAPPING_INVALID, NULL);
+ break;
+ default:
+ printk(KERN_WARNING "%s(%p, %ld) unknown action: %ld\n",
+ __FUNCTION__, mem, action, action);
+ WARN_ON(1);
+ ret = -EINVAL;
+ }
+ /*
+ * For now, only notify on successful memory operations
+ */
+ if (!ret)
+ memory_notify(action, NULL);
+
+ return ret;
+}
+
+static int memory_block_change_state(struct memory_block *mem,
+ unsigned long to_state, unsigned long from_state_req)
+{
+ int ret = 0;
+ down(&mem->state_sem);
+
+ if (mem->state != from_state_req) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = memory_block_action(mem, to_state);
+ if (!ret)
+ mem->state = to_state;
+
+out:
+ up(&mem->state_sem);
+ return ret;
+}
+
+static ssize_t
+store_mem_state(struct sys_device *dev, const char *buf, size_t count)
+{
+ struct memory_block *mem;
+ unsigned int phys_section_nr;
+ int ret = -EINVAL;
+
+ mem = container_of(dev, struct memory_block, sysdev);
+ phys_section_nr = mem->phys_index;
+
+ if (!valid_section_nr(phys_section_nr))
+ goto out;
+
+ if (!strncmp(buf, "online", min((int)count, 6)))
+ ret = memory_block_change_state(mem, MEM_ONLINE, MEM_OFFLINE);
+ else if(!strncmp(buf, "offline", min((int)count, 7)))
+ ret = memory_block_change_state(mem, MEM_OFFLINE, MEM_ONLINE);
+out:
+ if (ret)
+ return ret;
+ return count;
+}
+
+/*
+ * phys_device is a bad name for this. What I really want
+ * is a way to differentiate between memory ranges that
+ * are part of physical devices that constitute
+ * a complete removable unit or fru.
+ * i.e. do these ranges belong to the same physical device,
+ * s.t. if I offline all of these sections I can then
+ * remove the physical device?
+ */
+static ssize_t show_phys_device(struct sys_device *dev, char *buf)
+{
+ struct memory_block *mem =
+ container_of(dev, struct memory_block, sysdev);
+ return sprintf(buf, "%d\n", mem->phys_device);
+}
+
+static SYSDEV_ATTR(phys_index, 0444, show_mem_phys_index, NULL);
+static SYSDEV_ATTR(state, 0644, show_mem_state, store_mem_state);
+static SYSDEV_ATTR(phys_device, 0444, show_phys_device, NULL);
+
+#define mem_create_simple_file(mem, attr_name) \
+ sysdev_create_file(&mem->sysdev, &attr_##attr_name)
+#define mem_remove_simple_file(mem, attr_name) \
+ sysdev_remove_file(&mem->sysdev, &attr_##attr_name)
+
+/*
+ * Block size attribute stuff
+ */
+static ssize_t
+print_block_size(struct class *class, char *buf)
+{
+ return sprintf(buf, "%lx\n", (unsigned long)PAGES_PER_SECTION * PAGE_SIZE);
+}
+
+static CLASS_ATTR(block_size_bytes, 0444, print_block_size, NULL);
+
+static int block_size_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_block_size_bytes.attr);
+ return 0;
+}
+
+/*
+ * Some architectures will have custom drivers to do this, and
+ * will not need to do it from userspace. The fake hot-add code
+ * as well as ppc64 will do all of their discovery in userspace
+ * and will require this interface.
+ */
+#ifdef CONFIG_ARCH_MEMORY_PROBE
+static ssize_t
+memory_probe_store(struct class *class, const char __user *buf, size_t count)
+{
+ u64 phys_addr;
+ int ret;
+
+ phys_addr = simple_strtoull(buf, NULL, 0);
+
+ ret = add_memory(phys_addr, PAGES_PER_SECTION << PAGE_SHIFT);
+
+ if (ret)
+ count = ret;
+
+ return count;
+}
+static CLASS_ATTR(probe, 0700, NULL, memory_probe_store);
+
+static int memory_probe_init(void)
+{
+ sysfs_create_file(&memory_sysdev_class.kset.kobj,
+ &class_attr_probe.attr);
+ return 0;
+}
+#else
+#define memory_probe_init(...) do {} while (0)
+#endif
+
+/*
+ * Note that phys_device is optional. It is here to allow for
+ * differentiation between which *physical* devices each
+ * section belongs to...
+ */
+
+static int add_memory_block(unsigned long node_id, struct mem_section *section,
+ unsigned long state, int phys_device)
+{
+ struct memory_block *mem = kzalloc(sizeof(*mem), GFP_KERNEL);
+ int ret = 0;
+
+ if (!mem)
+ return -ENOMEM;
+
+ mem->phys_index = __section_nr(section);
+ mem->state = state;
+ init_MUTEX(&mem->state_sem);
+ mem->phys_device = phys_device;
+
+ ret = register_memory(mem, section, NULL);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_index);
+ if (!ret)
+ ret = mem_create_simple_file(mem, state);
+ if (!ret)
+ ret = mem_create_simple_file(mem, phys_device);
+
+ return ret;
+}
+
+/*
+ * For now, we have a linear search to go find the appropriate
+ * memory_block corresponding to a particular phys_index. If
+ * this gets to be a real problem, we can always use a radix
+ * tree or something here.
+ *
+ * This could be made generic for all sysdev classes.
+ */
+static struct memory_block *find_memory_block(struct mem_section *section)
+{
+ struct kobject *kobj;
+ struct sys_device *sysdev;
+ struct memory_block *mem;
+ char name[sizeof(MEMORY_CLASS_NAME) + 9 + 1];
+
+ /*
+ * This only works because we know that section == sysdev->id
+ * slightly redundant with sysdev_register()
+ */
+ sprintf(&name[0], "%s%d", MEMORY_CLASS_NAME, __section_nr(section));
+
+ kobj = kset_find_obj(&memory_sysdev_class.kset, name);
+ if (!kobj)
+ return NULL;
+
+ sysdev = container_of(kobj, struct sys_device, kobj);
+ mem = container_of(sysdev, struct memory_block, sysdev);
+
+ return mem;
+}
+
+int remove_memory_block(unsigned long node_id, struct mem_section *section,
+ int phys_device)
+{
+ struct memory_block *mem;
+
+ mem = find_memory_block(section);
+ mem_remove_simple_file(mem, phys_index);
+ mem_remove_simple_file(mem, state);
+ mem_remove_simple_file(mem, phys_device);
+ unregister_memory(mem, section, NULL);
+
+ return 0;
+}
+
+/*
+ * need an interface for the VM to add new memory regions,
+ * but without onlining it.
+ */
+int register_new_memory(struct mem_section *section)
+{
+ return add_memory_block(0, section, MEM_OFFLINE, 0);
+}
+
+int unregister_memory_section(struct mem_section *section)
+{
+ if (!valid_section(section))
+ return -EINVAL;
+
+ return remove_memory_block(0, section, 0);
+}
+
+/*
+ * Initialize the sysfs support for memory devices...
+ */
+int __init memory_dev_init(void)
+{
+ unsigned int i;
+ int ret;
+
+ memory_sysdev_class.kset.hotplug_ops = &memory_hotplug_ops;
+ ret = sysdev_class_register(&memory_sysdev_class);
+
+ /*
+ * Create entries for memory sections that were found
+ * during boot and have been initialized
+ */
+ for (i = 0; i < NR_MEM_SECTIONS; i++) {
+ if (!valid_section_nr(i))
+ continue;
+ add_memory_block(0, __nr_to_section(i), MEM_ONLINE, 0);
+ }
+
+ memory_probe_init();
+ block_size_init();
+
+ return ret;
+}
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 28c1a628621f..cf6631056683 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -15,7 +15,7 @@
#include <linux/crypto.h>
#include <linux/workqueue.h>
#include <asm/atomic.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <asm/page.h>
#include "dm.h"
@@ -164,9 +164,7 @@ static int crypt_iv_essiv_ctr(struct crypt_config *cc, struct dm_target *ti,
return -ENOMEM;
}
- sg.page = virt_to_page(cc->key);
- sg.offset = offset_in_page(cc->key);
- sg.length = cc->key_size;
+ sg_set_buf(&sg, cc->key, cc->key_size);
crypto_digest_digest(hash_tfm, &sg, 1, salt);
crypto_free_tfm(hash_tfm);
@@ -207,14 +205,12 @@ static void crypt_iv_essiv_dtr(struct crypt_config *cc)
static int crypt_iv_essiv_gen(struct crypt_config *cc, u8 *iv, sector_t sector)
{
- struct scatterlist sg = { NULL, };
+ struct scatterlist sg;
memset(iv, 0, cc->iv_size);
*(u64 *)iv = cpu_to_le64(sector);
- sg.page = virt_to_page(iv);
- sg.offset = offset_in_page(iv);
- sg.length = cc->iv_size;
+ sg_set_buf(&sg, iv, cc->iv_size);
crypto_cipher_encrypt((struct crypto_tfm *)cc->iv_gen_private,
&sg, &sg, cc->iv_size);
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4c11699bad91..750c0167539c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -35,6 +35,7 @@
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/bitops.h>
+#include <linux/scatterlist.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -1590,11 +1591,9 @@ static void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct
aes_counter[12] = (u8)(counter >> 24);
counter++;
memcpy (plain, aes_counter, 16);
- sg[0].page = virt_to_page(plain);
- sg[0].offset = ((long) plain & ~PAGE_MASK);
- sg[0].length = 16;
+ sg_set_buf(sg, plain, 16);
crypto_cipher_encrypt(tfm, sg, sg, 16);
- cipher = kmap(sg[0].page) + sg[0].offset;
+ cipher = kmap(sg->page) + sg->offset;
for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) {
context->coeff[i++] = ntohl(*(u32 *)&cipher[j]);
j += 4;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bbd9c2323d8c..5627ce1d2b32 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -356,7 +356,7 @@ static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int
/*
* PIIX4 ACPI: Two IO regions pointed to by longwords at
* 0x40 (64 bytes of ACPI registers)
- * 0x90 (32 bytes of SMB registers)
+ * 0x90 (16 bytes of SMB registers)
* and a few strange programmable PIIX4 device resources.
*/
static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
@@ -366,7 +366,7 @@ static void __devinit quirk_piix4_acpi(struct pci_dev *dev)
pci_read_config_dword(dev, 0x40, &region);
quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI");
pci_read_config_dword(dev, 0x90, &region);
- quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
+ quirk_io_region(dev, region, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB");
/* Device resource A has enables for some of the other ones */
pci_read_config_dword(dev, 0x5c, &res_a);
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index fe8187d6f58b..e2a5657d5fdb 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -41,6 +41,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -192,7 +193,6 @@ static void ahci_port_stop(struct ata_port *ap);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
-static u8 ahci_check_err(struct ata_port *ap);
static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
static void ahci_remove_one (struct pci_dev *pdev);
@@ -221,7 +221,6 @@ static const struct ata_port_operations ahci_ops = {
.check_status = ahci_check_status,
.check_altstatus = ahci_check_status,
- .check_err = ahci_check_err,
.dev_select = ata_noop_dev_select,
.tf_read = ahci_tf_read,
@@ -458,13 +457,6 @@ static u8 ahci_check_status(struct ata_port *ap)
return readl(mmio + PORT_TFDATA) & 0xFF;
}
-static u8 ahci_check_err(struct ata_port *ap)
-{
- void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr;
-
- return (readl(mmio + PORT_TFDATA) >> 8) & 0xFF;
-}
-
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
struct ahci_port_priv *pp = ap->private_data;
@@ -609,7 +601,7 @@ static void ahci_eng_timeout(struct ata_port *ap)
* not being called from the SCSI EH.
*/
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
}
spin_unlock_irqrestore(&host_set->lock, flags);
@@ -638,7 +630,7 @@ static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
if (status & PORT_IRQ_FATAL) {
ahci_intr_error(ap, status);
if (qc)
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
}
return 1;
@@ -683,10 +675,10 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
if (!ahci_host_intr(ap, qc))
if (ata_ratelimit()) {
struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- printk(KERN_WARNING
- "ahci(%s): unhandled interrupt on port %u\n",
- pci_name(pdev), i);
+ to_pci_dev(ap->host_set->dev);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "unhandled interrupt on port %u\n",
+ i);
}
VPRINTK("port %u\n", i);
@@ -694,10 +686,9 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
VPRINTK("port %u (no irq)\n", i);
if (ata_ratelimit()) {
struct pci_dev *pdev =
- to_pci_dev(ap->host_set->dev);
- printk(KERN_WARNING
- "ahci(%s): interrupt on disabled port %u\n",
- pci_name(pdev), i);
+ to_pci_dev(ap->host_set->dev);
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "interrupt on disabled port %u\n", i);
}
}
@@ -769,8 +760,8 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_RESET) {
- printk(KERN_ERR DRV_NAME "(%s): controller reset failed (0x%x)\n",
- pci_name(pdev), tmp);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "controller reset failed (0x%x)\n", tmp);
return -EIO;
}
@@ -798,22 +789,22 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 64-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
return rc;
}
}
@@ -916,10 +907,10 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
else
scc_s = "unknown";
- printk(KERN_INFO DRV_NAME "(%s) AHCI %02x%02x.%02x%02x "
+ dev_printk(KERN_INFO, &pdev->dev,
+ "AHCI %02x%02x.%02x%02x "
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
,
- pci_name(pdev),
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
@@ -932,11 +923,11 @@ static void ahci_print_info(struct ata_probe_ent *probe_ent)
impl,
scc_s);
- printk(KERN_INFO DRV_NAME "(%s) flags: "
+ dev_printk(KERN_INFO, &pdev->dev,
+ "flags: "
"%s%s%s%s%s%s"
"%s%s%s%s%s%s%s\n"
,
- pci_name(pdev),
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
@@ -969,7 +960,7 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
VPRINTK("ENTER\n");
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h
index 48e1c4d9738b..19937640e2e7 100644
--- a/drivers/scsi/arm/scsi.h
+++ b/drivers/scsi/arm/scsi.h
@@ -10,6 +10,8 @@
* Commonly used scsi driver functions.
*/
+#include <linux/scatterlist.h>
+
#define BELT_AND_BRACES
/*
@@ -22,9 +24,7 @@ static inline int copy_SCp_to_sg(struct scatterlist *sg, Scsi_Pointer *SCp, int
BUG_ON(bufs + 1 > max);
- sg->page = virt_to_page(SCp->ptr);
- sg->offset = offset_in_page(SCp->ptr);
- sg->length = SCp->this_residual;
+ sg_set_buf(sg, SCp->ptr, SCp->this_residual);
if (bufs)
memcpy(sg + 1, SCp->buffer + 1,
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index be021478f416..7f8aa1b552ce 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -45,6 +45,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -621,18 +622,19 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
struct ata_port_info *port_info[2];
- unsigned int combined = 0, n_ports = 1;
+ unsigned int combined = 0;
unsigned int pata_chan = 0, sata_chan = 0;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "version " DRV_VERSION "\n");
/* no hotplugging support (FIXME) */
if (!in_module_init)
return -ENODEV;
port_info[0] = &piix_port_info[ent->driver_data];
- port_info[1] = NULL;
+ port_info[1] = &piix_port_info[ent->driver_data];
if (port_info[0]->host_flags & PIIX_FLAG_AHCI) {
u8 tmp;
@@ -670,12 +672,13 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
port_info[sata_chan] = &piix_port_info[ent->driver_data];
port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
port_info[pata_chan] = &piix_port_info[ich5_pata];
- n_ports++;
- printk(KERN_WARNING DRV_NAME ": combined mode detected\n");
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "combined mode detected (p=%u, s=%u)\n",
+ pata_chan, sata_chan);
}
- return ata_pci_init_one(pdev, port_info, n_ports);
+ return ata_pci_init_one(pdev, port_info, 2);
}
static int __init piix_init(void)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index b1b1c6f01419..8be7dc0b47b8 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -49,6 +49,7 @@
#include <linux/suspend.h>
#include <linux/workqueue.h>
#include <linux/jiffies.h>
+#include <linux/scatterlist.h>
#include <scsi/scsi.h>
#include "scsi.h"
#include "scsi_priv.h"
@@ -371,7 +372,7 @@ static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
struct ata_ioports *ioaddr = &ap->ioaddr;
tf->command = ata_check_status(ap);
- tf->feature = ata_chk_err(ap);
+ tf->feature = inb(ioaddr->error_addr);
tf->nsect = inb(ioaddr->nsect_addr);
tf->lbal = inb(ioaddr->lbal_addr);
tf->lbam = inb(ioaddr->lbam_addr);
@@ -405,7 +406,7 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
struct ata_ioports *ioaddr = &ap->ioaddr;
tf->command = ata_check_status(ap);
- tf->feature = ata_chk_err(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
@@ -526,30 +527,6 @@ u8 ata_altstatus(struct ata_port *ap)
/**
- * ata_chk_err - Read device error reg
- * @ap: port where the device is
- *
- * Reads ATA taskfile error register for
- * currently-selected device and return its value.
- *
- * Note: may NOT be used as the check_err() entry in
- * ata_port_operations.
- *
- * LOCKING:
- * Inherited from caller.
- */
-u8 ata_chk_err(struct ata_port *ap)
-{
- if (ap->ops->check_err)
- return ap->ops->check_err(ap);
-
- if (ap->flags & ATA_FLAG_MMIO) {
- return readb((void __iomem *) ap->ioaddr.error_addr);
- }
- return inb(ap->ioaddr.error_addr);
-}
-
-/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @fis: Buffer into which data will output
@@ -901,8 +878,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device)
memset(&tf, 0, sizeof(tf));
- err = ata_chk_err(ap);
ap->ops->tf_read(ap, &tf);
+ err = tf.feature;
dev->class = ATA_DEV_NONE;
@@ -1139,7 +1116,6 @@ static void ata_dev_identify(struct ata_port *ap, unsigned int device)
unsigned int major_version;
u16 tmp;
unsigned long xfer_modes;
- u8 status;
unsigned int using_edd;
DECLARE_COMPLETION(wait);
struct ata_queued_cmd *qc;
@@ -1193,8 +1169,11 @@ retry:
else
wait_for_completion(&wait);
- status = ata_chk_status(ap);
- if (status & ATA_ERR) {
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->ops->tf_read(ap, &qc->tf);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (qc->tf.command & ATA_ERR) {
/*
* arg! EDD works for all test cases, but seems to return
* the ATA signature for some ATAPI devices. Until the
@@ -1207,7 +1186,7 @@ retry:
* to have this problem.
*/
if ((using_edd) && (qc->tf.command == ATA_CMD_ID_ATA)) {
- u8 err = ata_chk_err(ap);
+ u8 err = qc->tf.feature;
if (err & ATA_ABORTED) {
dev->class = ATA_DEV_ATAPI;
qc->cursg = 0;
@@ -2576,19 +2555,12 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
- struct scatterlist *sg;
-
qc->flags |= ATA_QCFLAG_SINGLE;
- memset(&qc->sgent, 0, sizeof(qc->sgent));
qc->sg = &qc->sgent;
qc->n_elem = 1;
qc->buf_virt = buf;
-
- sg = qc->sg;
- sg->page = virt_to_page(buf);
- sg->offset = (unsigned long) buf & ~PAGE_MASK;
- sg->length = buflen;
+ sg_init_one(qc->sg, buf, buflen);
}
/**
@@ -2691,7 +2663,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
* None. (grabs host lock)
*/
-void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_poll_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
struct ata_port *ap = qc->ap;
unsigned long flags;
@@ -2699,7 +2671,7 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_irq_on(ap);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, err_mask);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
@@ -2796,7 +2768,7 @@ static int ata_pio_complete (struct ata_port *ap)
ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat);
+ ata_poll_qc_complete(qc, 0);
/* another command may start at this point */
@@ -3164,18 +3136,15 @@ static void ata_pio_block(struct ata_port *ap)
static void ata_pio_error(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- u8 drv_stat;
+
+ printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
qc = ata_qc_from_tag(ap, ap->active_tag);
assert(qc != NULL);
- drv_stat = ata_chk_status(ap);
- printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n",
- ap->id, drv_stat);
-
ap->hsm_task_state = HSM_ST_IDLE;
- ata_poll_qc_complete(qc, drv_stat | ATA_ERR);
+ ata_poll_qc_complete(qc, AC_ERR_ATA_BUS);
}
static void ata_pio_task(void *_data)
@@ -3298,7 +3267,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
ap->id, qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -3403,7 +3372,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
return qc;
}
-int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat)
+int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask)
{
return 0;
}
@@ -3462,7 +3431,7 @@ void ata_qc_free(struct ata_queued_cmd *qc)
* spin_lock_irqsave(host_set lock)
*/
-void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+void ata_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
int rc;
@@ -3479,7 +3448,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
qc->flags &= ~ATA_QCFLAG_ACTIVE;
/* call completion callback */
- rc = qc->complete_fn(qc, drv_stat);
+ rc = qc->complete_fn(qc, err_mask);
/* if callback indicates not to complete command (non-zero),
* return immediately
@@ -3917,7 +3886,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
ap->ops->irq_clear(ap);
/* complete taskfile transaction */
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
break;
default:
@@ -4012,7 +3981,7 @@ static void atapi_packet_task(void *_data)
/* sleep-wait for BSY to clear */
DPRINTK("busy wait\n");
if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB))
- goto err_out;
+ goto err_out_status;
/* make sure DRQ is set */
status = ata_chk_status(ap);
@@ -4049,8 +4018,10 @@ static void atapi_packet_task(void *_data)
return;
+err_out_status:
+ status = ata_chk_status(ap);
err_out:
- ata_poll_qc_complete(qc, ATA_ERR);
+ ata_poll_qc_complete(qc, __ac_err_mask(status));
}
@@ -4556,11 +4527,11 @@ ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int
return probe_ent;
}
-static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num)
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num)
{
struct ata_probe_ent *probe_ent;
- probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port);
if (!probe_ent)
return NULL;
@@ -4707,9 +4678,9 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
if (legacy_mode) {
if (legacy_mode & (1 << 0))
- probe_ent = ata_pci_init_legacy_port(pdev, port, 0);
+ probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0);
if (legacy_mode & (1 << 1))
- probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1);
+ probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1);
} else {
if (n_ports == 2)
probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
@@ -4873,7 +4844,6 @@ EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
EXPORT_SYMBOL_GPL(ata_check_status);
EXPORT_SYMBOL_GPL(ata_altstatus);
-EXPORT_SYMBOL_GPL(ata_chk_err);
EXPORT_SYMBOL_GPL(ata_exec_command);
EXPORT_SYMBOL_GPL(ata_port_start);
EXPORT_SYMBOL_GPL(ata_port_stop);
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 89a04b1a5a0e..1e3792f86fcf 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -560,7 +560,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
- if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3]);
sb[1] &= 0x0f;
@@ -635,7 +635,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
* Use ata_to_sense_error() to map status register bits
* onto sense key, asc & ascq.
*/
- if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) {
+ if (tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
&sb[2], &sb[12], &sb[13]);
sb[2] &= 0x0f;
@@ -644,7 +644,11 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
sb[0] = 0x70;
sb[7] = 0x0a;
- if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) {
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ /* TODO: find solution for LBA48 descriptors */
+ }
+
+ else if (tf->flags & ATA_TFLAG_LBA) {
/* A small (28b) LBA will fit in the 32b info field */
sb[0] |= 0x80; /* set valid bit */
sb[3] = tf->device & 0x0f;
@@ -652,6 +656,10 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
sb[5] = tf->lbam;
sb[6] = tf->lbal;
}
+
+ else {
+ /* TODO: C/H/S */
+ }
}
/**
@@ -1199,10 +1207,12 @@ nothing_to_do:
return 1;
}
-static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+static int ata_scsi_qc_complete(struct ata_queued_cmd *qc,
+ unsigned int err_mask)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ);
+ u8 *cdb = cmd->cmnd;
+ int need_sense = (err_mask != 0);
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
@@ -1211,8 +1221,8 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
* whether the command completed successfully or not. If there
* was no error, SK, ASC and ASCQ will all be zero.
*/
- if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) &&
- ((cmd->cmnd[2] & 0x20) || need_sense)) {
+ if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
+ ((cdb[2] & 0x20) || need_sense)) {
ata_gen_ata_desc_sense(qc);
} else {
if (!need_sense) {
@@ -1995,21 +2005,13 @@ void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
DPRINTK("EXIT\n");
}
-static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
+static int atapi_qc_complete(struct ata_queued_cmd *qc, unsigned int err_mask)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
-
- if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
- /* FIXME: not quite right; we don't want the
- * translation of taskfile registers into
- * a sense descriptors, since that's only
- * correct for ATA, not ATAPI
- */
- ata_gen_ata_desc_sense(qc);
+ VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
- else if (unlikely(drv_stat & ATA_ERR)) {
+ if (unlikely(err_mask & AC_ERR_DEV)) {
DPRINTK("request check condition\n");
/* FIXME: command completion with check condition
@@ -2026,6 +2028,14 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
return 1;
}
+ else if (unlikely(err_mask))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
+
else {
u8 *scsicmd = cmd->cmnd;
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 65c264b91136..10ecd9e15e4f 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -39,7 +39,7 @@ struct ata_scsi_args {
/* libata-core.c */
extern int atapi_enabled;
-extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat);
+extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, unsigned int err_mask);
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
struct ata_device *dev);
extern void ata_rwcmd_protocol(struct ata_queued_cmd *qc);
diff --git a/drivers/scsi/pdc_adma.c b/drivers/scsi/pdc_adma.c
index af99feb9d237..665017eda8a6 100644
--- a/drivers/scsi/pdc_adma.c
+++ b/drivers/scsi/pdc_adma.c
@@ -40,6 +40,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <asm/io.h>
@@ -451,7 +452,7 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set)
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
void __iomem *chan = ADMA_REGS(mmio_base, port_no);
- u8 drv_stat = 0, status = readb(chan + ADMA_STATUS);
+ u8 status = readb(chan + ADMA_STATUS);
if (status == 0)
continue;
@@ -464,11 +465,14 @@ static inline unsigned int adma_intr_pkt(struct ata_host_set *host_set)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
+ unsigned int err_mask = 0;
+
if ((status & (aPERR | aPSD | aUIRQ)))
- drv_stat = ATA_ERR;
+ err_mask = AC_ERR_OTHER;
else if (pp->pkt[0] != cDONE)
- drv_stat = ATA_ERR;
- ata_qc_complete(qc, drv_stat);
+ err_mask = AC_ERR_OTHER;
+
+ ata_qc_complete(qc, err_mask);
}
}
return handled;
@@ -498,7 +502,7 @@ static inline unsigned int adma_intr_mmio(struct ata_host_set *host_set)
/* complete taskfile transaction */
pp->state = adma_state_idle;
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
handled = 1;
}
}
@@ -623,16 +627,14 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
return rc;
}
return 0;
@@ -648,7 +650,7 @@ static int adma_ata_init_one(struct pci_dev *pdev,
int rc, port_no;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 422e0b6f603a..46dbdee79f77 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -29,6 +29,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -258,7 +259,6 @@ struct mv_host_priv {
static void mv_irq_clear(struct ata_port *ap);
static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static u8 mv_check_err(struct ata_port *ap);
static void mv_phy_reset(struct ata_port *ap);
static void mv_host_stop(struct ata_host_set *host_set);
static int mv_port_start(struct ata_port *ap);
@@ -296,7 +296,6 @@ static const struct ata_port_operations mv_ops = {
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
- .check_err = mv_check_err,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
@@ -1067,6 +1066,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
struct ata_queued_cmd *qc;
u32 hc_irq_cause;
int shift, port, port0, hard_port, handled;
+ unsigned int err_mask;
u8 ata_status = 0;
if (hc == 0) {
@@ -1102,15 +1102,15 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
handled++;
}
+ err_mask = ac_err_mask(ata_status);
+
shift = port << 1; /* (port * 2) */
if (port >= MV_PORTS_PER_HC) {
shift++; /* skip bit 8 in the HC Main IRQ reg */
}
if ((PORT0_ERR << shift) & relevant) {
mv_err_intr(ap);
- /* OR in ATA_ERR to ensure libata knows we took one */
- ata_status = readb((void __iomem *)
- ap->ioaddr.status_addr) | ATA_ERR;
+ err_mask |= AC_ERR_OTHER;
handled++;
}
@@ -1120,7 +1120,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant,
VPRINTK("port %u IRQ found for qc, "
"ata_status 0x%x\n", port,ata_status);
/* mark qc status appropriately */
- ata_qc_complete(qc, ata_status);
+ ata_qc_complete(qc, err_mask);
}
}
}
@@ -1185,22 +1185,6 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance,
}
/**
- * mv_check_err - Return the error shadow register to caller.
- * @ap: ATA channel to manipulate
- *
- * Marvell requires DMA to be stopped before accessing shadow
- * registers. So we do that, then return the needed register.
- *
- * LOCKING:
- * Inherited from caller. FIXME: protect mv_stop_dma with lock?
- */
-static u8 mv_check_err(struct ata_port *ap)
-{
- mv_stop_dma(ap); /* can't read shadow regs if DMA on */
- return readb((void __iomem *) ap->ioaddr.error_addr);
-}
-
-/**
* mv_phy_reset - Perform eDMA reset followed by COMRESET
* @ap: ATA channel to manipulate
*
@@ -1312,7 +1296,7 @@ static void mv_eng_timeout(struct ata_port *ap)
*/
spin_lock_irqsave(&ap->host_set->lock, flags);
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
}
@@ -1454,9 +1438,9 @@ static void mv_print_info(struct ata_probe_ent *probe_ent)
else
scc_s = "unknown";
- printk(KERN_INFO DRV_NAME
- "(%s) %u slots %u ports %s mode IRQ via %s\n",
- pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
+ dev_printk(KERN_INFO, &pdev->dev,
+ "%u slots %u ports %s mode IRQ via %s\n",
+ (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports,
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
@@ -1477,9 +1461,8 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
void __iomem *mmio_base;
int pci_dev_busy = 0, rc;
- if (!printed_version++) {
- printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n");
- }
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc) {
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
index 1a56d6c79ddd..d573888eda76 100644
--- a/drivers/scsi/sata_nv.c
+++ b/drivers/scsi/sata_nv.c
@@ -61,6 +61,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -383,7 +384,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENODEV;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 63911f16b6ec..b41c977d6fab 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -399,7 +400,8 @@ static void pdc_eng_timeout(struct ata_port *ap)
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
+ drv_stat = ata_wait_idle(ap);
+ ata_qc_complete(qc, __ac_err_mask(drv_stat));
break;
default:
@@ -408,7 +410,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -420,24 +422,21 @@ out:
static inline unsigned int pdc_host_intr( struct ata_port *ap,
struct ata_queued_cmd *qc)
{
- u8 status;
- unsigned int handled = 0, have_err = 0;
+ unsigned int handled = 0, err_mask = 0;
u32 tmp;
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
tmp = readl(mmio);
if (tmp & PDC_ERR_MASK) {
- have_err = 1;
+ err_mask = AC_ERR_DEV;
pdc_reset_port(ap);
}
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- status = ata_wait_idle(ap);
- if (have_err)
- status |= ATA_ERR;
- ata_qc_complete(qc, status);
+ err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc, err_mask);
handled = 1;
break;
@@ -635,7 +634,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_qstor.c b/drivers/scsi/sata_qstor.c
index 1aaf3304d397..9938dae782b6 100644
--- a/drivers/scsi/sata_qstor.c
+++ b/drivers/scsi/sata_qstor.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <asm/io.h>
@@ -400,11 +401,12 @@ static inline unsigned int qs_intr_pkt(struct ata_host_set *host_set)
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.ctl & ATA_NIEN))) {
switch (sHST) {
- case 0: /* sucessful CPB */
+ case 0: /* successful CPB */
case 3: /* device error */
pp->state = qs_state_idle;
qs_enter_reg_mode(qc->ap);
- ata_qc_complete(qc, sDST);
+ ata_qc_complete(qc,
+ ac_err_mask(sDST));
break;
default:
break;
@@ -441,7 +443,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host_set *host_set)
/* complete taskfile transaction */
pp->state = qs_state_idle;
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
handled = 1;
}
}
@@ -599,25 +601,22 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 64-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME
- "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
return rc;
}
}
@@ -634,7 +633,7 @@ static int qs_ata_init_one(struct pci_dev *pdev,
int rc, port_no;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 3a056173fb95..435f7e0085ec 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -41,6 +41,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -386,7 +387,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u8 cls;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
@@ -463,8 +464,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
writeb(cls, mmio_base + SIL_FIFO_W3);
}
} else
- printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n",
- pci_name(pdev));
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "cache line size not set. Driver may not function\n");
if (ent->driver_data == sil_3114) {
irq_mask = SIL_MASK_4PORT;
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index 51855d3bac64..c66548025657 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include <scsi/scsi_host.h>
#include "scsi.h"
#include <linux/libata.h>
@@ -225,7 +226,6 @@ struct sil24_host_priv {
};
static u8 sil24_check_status(struct ata_port *ap);
-static u8 sil24_check_err(struct ata_port *ap);
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
@@ -280,7 +280,6 @@ static const struct ata_port_operations sil24_ops = {
.check_status = sil24_check_status,
.check_altstatus = sil24_check_status,
- .check_err = sil24_check_err,
.dev_select = ata_noop_dev_select,
.tf_read = sil24_tf_read,
@@ -363,12 +362,6 @@ static u8 sil24_check_status(struct ata_port *ap)
return pp->tf.command;
}
-static u8 sil24_check_err(struct ata_port *ap)
-{
- struct sil24_port_priv *pp = ap->private_data;
- return pp->tf.feature;
-}
-
static int sil24_scr_map[] = {
[SCR_CONTROL] = 0,
[SCR_STATUS] = 1,
@@ -506,7 +499,7 @@ static void sil24_eng_timeout(struct ata_port *ap)
qc = ata_qc_from_tag(ap, ap->active_tag);
if (!qc) {
- printk(KERN_ERR "ata%u: BUG: tiemout without command\n",
+ printk(KERN_ERR "ata%u: BUG: timeout without command\n",
ap->id);
return;
}
@@ -520,7 +513,7 @@ static void sil24_eng_timeout(struct ata_port *ap)
*/
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, ATA_ERR);
+ ata_qc_complete(qc, AC_ERR_OTHER);
sil24_reset_controller(ap);
}
@@ -531,6 +524,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 irq_stat, cmd_err, sstatus, serror;
+ unsigned int err_mask;
irq_stat = readl(port + PORT_IRQ_STAT);
writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
@@ -558,17 +552,18 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
* Device is reporting error, tf registers are valid.
*/
sil24_update_tf(ap);
+ err_mask = ac_err_mask(pp->tf.command);
} else {
/*
* Other errors. libata currently doesn't have any
* mechanism to report these errors. Just turn on
* ATA_ERR.
*/
- pp->tf.command = ATA_ERR;
+ err_mask = AC_ERR_OTHER;
}
if (qc)
- ata_qc_complete(qc, pp->tf.command);
+ ata_qc_complete(qc, err_mask);
sil24_reset_controller(ap);
}
@@ -593,7 +588,7 @@ static inline void sil24_host_intr(struct ata_port *ap)
sil24_update_tf(ap);
if (qc)
- ata_qc_complete(qc, pp->tf.command);
+ ata_qc_complete(qc, ac_err_mask(pp->tf.command));
} else
sil24_error_intr(ap, slot_stat);
}
@@ -696,7 +691,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
int i, rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
@@ -756,14 +751,14 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit DMA enable failed\n");
goto out_free;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
- printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "32-bit consistent DMA enable failed\n");
goto out_free;
}
@@ -799,9 +794,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
break;
}
if (tmp & PORT_CS_PORT_RST)
- printk(KERN_ERR DRV_NAME
- "(%s): failed to clear port RST\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to clear port RST\n");
}
/* Zero error counters. */
@@ -830,9 +824,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Reset itself */
if (__sil24_reset_controller(port))
- printk(KERN_ERR DRV_NAME
- "(%s): failed to reset controller\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to reset controller\n");
}
/* Turn on interrupts */
diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c
index 057f7b98b6c4..42288be0e561 100644
--- a/drivers/scsi/sata_sis.c
+++ b/drivers/scsi/sata_sis.c
@@ -38,6 +38,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -237,6 +238,7 @@ static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
int rc;
u32 genctl;
@@ -245,6 +247,9 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u8 pmr;
u8 port2_start;
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
@@ -288,16 +293,18 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
pci_read_config_byte(pdev, SIS_PMR, &pmr);
if (ent->device != 0x182) {
if ((pmr & SIS_PMR_COMBINED) == 0) {
- printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in SATA mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 180/181 chipset in SATA mode\n");
port2_start = 64;
}
else {
- printk(KERN_INFO "sata_sis: Detected SiS 180/181 chipset in combined mode\n");
+ dev_printk(KERN_INFO, &pdev->dev,
+ "Detected SiS 180/181 chipset in combined mode\n");
port2_start=0;
}
}
else {
- printk(KERN_INFO "sata_sis: Detected SiS 182 chipset\n");
+ dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
port2_start = 0x20;
}
diff --git a/drivers/scsi/sata_svw.c b/drivers/scsi/sata_svw.c
index 46208f52d0e1..db615ff794d8 100644
--- a/drivers/scsi/sata_svw.c
+++ b/drivers/scsi/sata_svw.c
@@ -44,6 +44,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -362,7 +363,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
int i;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index af08f4f650c1..0ec21e09f5d8 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -38,6 +38,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -718,7 +719,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap));
+ ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
pdc20621_pop_hdma(qc);
}
@@ -756,7 +757,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ata_wait_idle(ap));
+ ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
pdc20621_pop_hdma(qc);
}
handled = 1;
@@ -766,7 +767,7 @@ static inline unsigned int pdc20621_host_intr( struct ata_port *ap,
status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
- ata_qc_complete(qc, status);
+ ata_qc_complete(qc, ac_err_mask(status));
handled = 1;
} else {
@@ -881,7 +882,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
+ ata_qc_complete(qc, __ac_err_mask(ata_wait_idle(ap)));
break;
default:
@@ -890,7 +891,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -1385,7 +1386,7 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/*
* If this driver happens to only be useful on Apple's K2, then
diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c
index d68dc7d3422c..a5e245c098e1 100644
--- a/drivers/scsi/sata_uli.c
+++ b/drivers/scsi/sata_uli.c
@@ -32,6 +32,7 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -178,12 +179,16 @@ static void uli_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
+ static int printed_version;
struct ata_probe_ent *probe_ent;
struct ata_port_info *ppi;
int rc;
unsigned int board_idx = (unsigned int) ent->driver_data;
int pci_dev_busy = 0;
+ if (!printed_version++)
+ dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
rc = pci_enable_device(pdev);
if (rc)
return rc;
diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c
index 80e291a909a9..b3ecdbe400e9 100644
--- a/drivers/scsi/sata_via.c
+++ b/drivers/scsi/sata_via.c
@@ -41,6 +41,7 @@
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -259,15 +260,15 @@ static void svia_configure(struct pci_dev *pdev)
u8 tmp8;
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
- printk(KERN_INFO DRV_NAME "(%s): routed to hard irq line %d\n",
- pci_name(pdev),
+ dev_printk(KERN_INFO, &pdev->dev, "routed to hard irq line %d\n",
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
/* make sure SATA channels are enabled */
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channels (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channels (0x%x)\n",
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
}
@@ -275,8 +276,9 @@ static void svia_configure(struct pci_dev *pdev)
/* make sure interrupts for each channel sent to us */
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel interrupts (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channel interrupts (0x%x)\n",
+ (int) tmp8);
tmp8 |= ALL_PORTS;
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
}
@@ -284,8 +286,9 @@ static void svia_configure(struct pci_dev *pdev)
/* make sure native mode is enabled */
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
- printk(KERN_DEBUG DRV_NAME "(%s): enabling SATA channel native mode (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "enabling SATA channel native mode (0x%x)\n",
+ (int) tmp8);
tmp8 |= NATIVE_MODE_ALL;
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
}
@@ -303,7 +306,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
u8 tmp8;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
@@ -318,8 +321,9 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (board_id == vt6420) {
pci_read_config_byte(pdev, SATA_PATA_SHARING, &tmp8);
if (tmp8 & SATA_2DEV) {
- printk(KERN_ERR DRV_NAME "(%s): SATA master/slave not supported (0x%x)\n",
- pci_name(pdev), (int) tmp8);
+ dev_printk(KERN_ERR, &pdev->dev,
+ "SATA master/slave not supported (0x%x)\n",
+ (int) tmp8);
rc = -EIO;
goto err_out_regions;
}
@@ -332,10 +336,11 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
if ((pci_resource_start(pdev, i) == 0) ||
(pci_resource_len(pdev, i) < bar_sizes[i])) {
- printk(KERN_ERR DRV_NAME "(%s): invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
- pci_name(pdev), i,
- pci_resource_start(pdev, i),
- pci_resource_len(pdev, i));
+ dev_printk(KERN_ERR, &pdev->dev,
+ "invalid PCI BAR %u (sz 0x%lx, val 0x%lx)\n",
+ i,
+ pci_resource_start(pdev, i),
+ pci_resource_len(pdev, i));
rc = -ENODEV;
goto err_out_regions;
}
@@ -353,8 +358,7 @@ static int svia_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
probe_ent = vt6421_init_probe_ent(pdev);
if (!probe_ent) {
- printk(KERN_ERR DRV_NAME "(%s): out of memory\n",
- pci_name(pdev));
+ dev_printk(KERN_ERR, &pdev->dev, "out of memory\n");
rc = -ENOMEM;
goto err_out_regions;
}
diff --git a/drivers/scsi/sata_vsc.c b/drivers/scsi/sata_vsc.c
index 54273e0063c7..bb84ba0c7e83 100644
--- a/drivers/scsi/sata_vsc.c
+++ b/drivers/scsi/sata_vsc.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
+#include <linux/device.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include <linux/libata.h>
@@ -295,7 +296,7 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d
int rc;
if (!printed_version++)
- printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pci_enable_device(pdev);
if (rc)
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 861e51375d70..d86d5c26061d 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -49,6 +49,7 @@ static int sg_version_num = 30533; /* 2 digits for each component */
#include <linux/seq_file.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
+#include <linux/scatterlist.h>
#include "scsi.h"
#include <scsi/scsi_dbg.h>
@@ -1886,13 +1887,17 @@ st_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_pages,
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
- /* unlock_page(sgl[i].page); */
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
+ /* unlock_page(page); */
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
@@ -1992,9 +1997,7 @@ sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size)
if (!p)
break;
}
- sclp->page = virt_to_page(p);
- sclp->offset = offset_in_page(p);
- sclp->length = ret_sz;
+ sg_set_buf(sclp, p, ret_sz);
SCSI_LOG_TIMEOUT(5, printk("sg_build_build: k=%d, a=0x%p, len=%d\n",
k, sg_scatg2virt(sclp), ret_sz));
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 5eb54d8019b4..da9766283bd7 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4526,12 +4526,16 @@ static int sgl_unmap_user_pages(struct scatterlist *sgl, const unsigned int nr_p
int i;
for (i=0; i < nr_pages; i++) {
- if (dirtied && !PageReserved(sgl[i].page))
- SetPageDirty(sgl[i].page);
+ struct page *page = sgl[i].page;
+
+ /* XXX: just for debug. Remove when PageReserved is removed */
+ BUG_ON(PageReserved(page));
+ if (dirtied)
+ SetPageDirty(page);
/* FIXME: cache flush missing for rw==READ
* FIXME: call the correct reference counting function
*/
- page_cache_release(sgl[i].page);
+ page_cache_release(page);
}
return 0;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 90a96257d6ce..2997f558159b 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -9,7 +9,7 @@
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/usb.h>
@@ -381,7 +381,6 @@ alloc_sglist (int nents, int max, int vary)
sg = kmalloc (nents * sizeof *sg, SLAB_KERNEL);
if (!sg)
return NULL;
- memset (sg, 0, nents * sizeof *sg);
for (i = 0; i < nents; i++) {
char *buf;
@@ -394,9 +393,7 @@ alloc_sglist (int nents, int max, int vary)
memset (buf, 0, size);
/* kmalloc pages are always physically contiguous! */
- sg [i].page = virt_to_page (buf);
- sg [i].offset = offset_in_page (buf);
- sg [i].length = size;
+ sg_init_one(&sg[i], buf, size);
if (vary) {
size += vary;
OpenPOWER on IntegriCloud