diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/isci/remote_device.c | 27 | ||||
-rw-r--r-- | drivers/scsi/isci/remote_device.h | 1 | ||||
-rw-r--r-- | drivers/scsi/isci/request.c | 27 | ||||
-rw-r--r-- | drivers/scsi/isci/request.h | 9 | ||||
-rw-r--r-- | drivers/scsi/isci/task.c | 16 |
5 files changed, 73 insertions, 7 deletions
diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 9f45c2ba7307..c5ce0f0f3645 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -68,17 +68,39 @@ * @isci_host: This parameter specifies the isci host object. * @isci_device: This parameter specifies the remote device * + * scic_lock is held on entrance to this function. */ static void isci_remote_device_not_ready(struct isci_host *ihost, struct isci_remote_device *idev, u32 reason) { + struct isci_request * ireq; + dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p\n", __func__, idev); - if (reason == SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED) + switch (reason) { + case SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED: set_bit(IDEV_GONE, &idev->flags); - else + break; + case SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED: + set_bit(IDEV_IO_NCQERROR, &idev->flags); + + /* Kill all outstanding requests for the device. */ + list_for_each_entry(ireq, &idev->reqs_in_process, dev_node) { + + dev_dbg(&ihost->pdev->dev, + "%s: isci_device = %p request = %p\n", + __func__, idev, ireq); + + scic_controller_terminate_request(&ihost->sci, + &idev->sci, + &ireq->sci); + } + /* Fall through into the default case... */ + default: clear_bit(IDEV_IO_READY, &idev->flags); + break; + } } /** @@ -94,6 +116,7 @@ static void isci_remote_device_ready(struct isci_host *ihost, struct isci_remote dev_dbg(&ihost->pdev->dev, "%s: idev = %p\n", __func__, idev); + clear_bit(IDEV_IO_NCQERROR, &idev->flags); set_bit(IDEV_IO_READY, &idev->flags); if (test_and_clear_bit(IDEV_START_PENDING, &idev->flags)) wake_up(&ihost->eventq); diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index cde595078f6d..0d9e37fe734f 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -136,6 +136,7 @@ struct isci_remote_device { #define IDEV_EH 3 #define IDEV_GONE 4 #define IDEV_IO_READY 5 + #define IDEV_IO_NCQERROR 6 unsigned long flags; struct kref kref; struct isci_port *isci_port; diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 1043fed2a40a..08a7340b33bf 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -3587,9 +3587,30 @@ int isci_request_execute(struct isci_host *ihost, struct isci_remote_device *ide spin_lock_irqsave(&ihost->scic_lock, flags); - /* send the request, let the core assign the IO TAG. */ - status = scic_controller_start_io(&ihost->sci, &idev->sci, &ireq->sci, - SCI_CONTROLLER_INVALID_IO_TAG); + if (test_bit(IDEV_IO_NCQERROR, &idev->flags)) { + + if (isci_task_is_ncq_recovery(task)) { + + /* The device is in an NCQ recovery state. Issue the + * request on the task side. Note that it will + * complete on the I/O request side because the + * request was built that way (ie. + * ireq->is_task_management_request is false). + */ + status = scic_controller_start_task(&ihost->sci, + &idev->sci, + &ireq->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + } else { + status = SCI_FAILURE; + } + } else { + + /* send the request, let the core assign the IO TAG. */ + status = scic_controller_start_io(&ihost->sci, &idev->sci, + &ireq->sci, + SCI_CONTROLLER_INVALID_IO_TAG); + } if (status != SCI_SUCCESS && status != SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED) { dev_warn(&ihost->pdev->dev, diff --git a/drivers/scsi/isci/request.h b/drivers/scsi/isci/request.h index 7c8b59a7c02c..9130f22a63b8 100644 --- a/drivers/scsi/isci/request.h +++ b/drivers/scsi/isci/request.h @@ -687,4 +687,13 @@ scic_task_request_construct_sata(struct scic_sds_request *sci_req); void scic_stp_io_request_set_ncq_tag(struct scic_sds_request *sci_req, u16 ncq_tag); void scic_sds_smp_request_copy_response(struct scic_sds_request *sci_req); + +static inline int isci_task_is_ncq_recovery(struct sas_task *task) +{ + return (sas_protocol_ata(task->task_proto) && + task->ata_task.fis.command == ATA_CMD_READ_LOG_EXT && + task->ata_task.fis.lbal == ATA_LOG_SATA_NCQ); + +} + #endif /* !defined(_ISCI_REQUEST_H_) */ diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index 0835a2c2dc71..157e9978183a 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -133,6 +133,15 @@ static void isci_task_refuse(struct isci_host *ihost, struct sas_task *task, for (; num > 0; num--,\ task = list_entry(task->list.next, struct sas_task, list)) + +static inline int isci_device_io_ready(struct isci_remote_device *idev, + struct sas_task *task) +{ + return idev ? test_bit(IDEV_IO_READY, &idev->flags) || + (test_bit(IDEV_IO_NCQERROR, &idev->flags) && + isci_task_is_ncq_recovery(task)) + : 0; +} /** * isci_task_execute_task() - This function is one of the SAS Domain Template * functions. This function is called by libsas to send a task down to @@ -165,7 +174,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) for_each_sas_task(num, task) { spin_lock_irqsave(&ihost->scic_lock, flags); idev = isci_lookup_device(task->dev); - io_ready = idev ? test_bit(IDEV_IO_READY, &idev->flags) : 0; + io_ready = isci_device_io_ready(idev, task); spin_unlock_irqrestore(&ihost->scic_lock, flags); dev_dbg(&ihost->pdev->dev, @@ -178,6 +187,7 @@ int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags) SAS_DEVICE_UNKNOWN); isci_host_can_dequeue(ihost, 1); } else if (!io_ready) { + /* Indicate QUEUE_FULL so that the scsi midlayer * retries. */ @@ -299,7 +309,9 @@ int isci_task_execute_tmf(struct isci_host *ihost, /* sanity check, return TMF_RESP_FUNC_FAILED * if the device is not there and ready. */ - if (!isci_device || !test_bit(IDEV_IO_READY, &isci_device->flags)) { + if (!isci_device || + (!test_bit(IDEV_IO_READY, &isci_device->flags) && + !test_bit(IDEV_IO_NCQERROR, &isci_device->flags))) { dev_dbg(&ihost->pdev->dev, "%s: isci_device = %p not ready (%#lx)\n", __func__, |