diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/bnx2.c | 10 | ||||
| -rw-r--r-- | drivers/net/can/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/net/netxen/netxen_nic_init.c | 37 | ||||
| -rw-r--r-- | drivers/net/netxen/netxen_nic_main.c | 7 | ||||
| -rw-r--r-- | drivers/net/qla3xxx.c | 6 |
6 files changed, 42 insertions, 21 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 1dc721517e4c..c155bd3ec9f1 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1725,6 +1725,7 @@ config TLAN config KS8842 tristate "Micrel KSZ8842" + depends on HAS_IOMEM help This platform driver is for Micrel KSZ8842 chip. diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 38f1c3375d7f..b70cc99962fc 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -6825,6 +6825,14 @@ bnx2_nway_reset(struct net_device *dev) return 0; } +static u32 +bnx2_get_link(struct net_device *dev) +{ + struct bnx2 *bp = netdev_priv(dev); + + return bp->link_up; +} + static int bnx2_get_eeprom_len(struct net_device *dev) { @@ -7392,7 +7400,7 @@ static const struct ethtool_ops bnx2_ethtool_ops = { .get_wol = bnx2_get_wol, .set_wol = bnx2_set_wol, .nway_reset = bnx2_nway_reset, - .get_link = ethtool_op_get_link, + .get_link = bnx2_get_link, .get_eeprom_len = bnx2_get_eeprom_len, .get_eeprom = bnx2_get_eeprom, .set_eeprom = bnx2_set_eeprom, diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index d5e18812bf49..33821a81cbf8 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -36,7 +36,7 @@ config CAN_CALC_BITTIMING If unsure, say Y. config CAN_SJA1000 - depends on CAN_DEV + depends on CAN_DEV && HAS_IOMEM tristate "Philips SJA1000" ---help--- Driver for the SJA1000 CAN controllers from Philips or NXP diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index bdb143d2b5c7..055bb61d6e77 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -944,28 +944,31 @@ int netxen_phantom_init(struct netxen_adapter *adapter, int pegtune_val) u32 val = 0; int retries = 60; - if (!pegtune_val) { - do { - val = NXRD32(adapter, CRB_CMDPEG_STATE); + if (pegtune_val) + return 0; - if (val == PHAN_INITIALIZE_COMPLETE || - val == PHAN_INITIALIZE_ACK) - return 0; + do { + val = NXRD32(adapter, CRB_CMDPEG_STATE); - msleep(500); + switch (val) { + case PHAN_INITIALIZE_COMPLETE: + case PHAN_INITIALIZE_ACK: + return 0; + case PHAN_INITIALIZE_FAILED: + goto out_err; + default: + break; + } - } while (--retries); + msleep(500); - if (!retries) { - pegtune_val = NXRD32(adapter, - NETXEN_ROMUSB_GLB_PEGTUNE_DONE); - printk(KERN_WARNING "netxen_phantom_init: init failed, " - "pegtune_val=%x\n", pegtune_val); - return -1; - } - } + } while (--retries); - return 0; + NXWR32(adapter, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED); + +out_err: + dev_warn(&adapter->pdev->dev, "firmware init failed\n"); + return -EIO; } static int diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 71daa3d5f114..2919a2d12bf4 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -705,7 +705,7 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw) first_driver = (adapter->ahw.pci_func == 0); if (!first_driver) - return 0; + goto wait_init; first_boot = NXRD32(adapter, NETXEN_CAM_RAM(0x1fc)); @@ -752,6 +752,7 @@ netxen_start_firmware(struct netxen_adapter *adapter, int request_fw) | (_NETXEN_NIC_LINUX_SUBVERSION); NXWR32(adapter, CRB_DRIVER_VERSION, val); +wait_init: /* Handshake with the card before we register the devices. */ err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); if (err) { @@ -1178,6 +1179,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) free_netdev(netdev); } +#ifdef CONFIG_PM static int netxen_nic_suspend(struct pci_dev *pdev, pm_message_t state) { @@ -1242,6 +1244,7 @@ netxen_nic_resume(struct pci_dev *pdev) return 0; } +#endif static int netxen_nic_open(struct net_device *netdev) { @@ -1771,8 +1774,10 @@ static struct pci_driver netxen_driver = { .id_table = netxen_pci_tbl, .probe = netxen_nic_probe, .remove = __devexit_p(netxen_nic_remove), +#ifdef CONFIG_PM .suspend = netxen_nic_suspend, .resume = netxen_nic_resume +#endif }; /* Driver Registration on NetXen card */ diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index bbc6d4d3cc94..3e4b67aaa6ea 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3142,6 +3142,7 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) (void __iomem *)port_regs; u32 delay = 10; int status = 0; + unsigned long hw_flags = 0; if(ql_mii_setup(qdev)) return -1; @@ -3150,7 +3151,8 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) ql_write_common_reg(qdev, &port_regs->CommonRegs.serialPortInterfaceReg, (ISP_SERIAL_PORT_IF_WE | (ISP_SERIAL_PORT_IF_WE << 16))); - + /* Give the PHY time to come out of reset. */ + mdelay(100); qdev->port_link_state = LS_DOWN; netif_carrier_off(qdev->ndev); @@ -3350,7 +3352,9 @@ static int ql_adapter_initialize(struct ql3_adapter *qdev) value = ql_read_page0_reg(qdev, &port_regs->portStatus); if (value & PORT_STATUS_IC) break; + spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); msleep(500); + spin_lock_irqsave(&qdev->hw_lock, hw_flags); } while (--delay); if (delay == 0) { |
