diff options
Diffstat (limited to 'drivers')
72 files changed, 5858 insertions, 1223 deletions
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 3b7e83d2dab4..d5ff142c93a2 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -486,7 +486,7 @@ static ssize_t asd_show_update_bios(struct device *dev, flash_error_table[i].reason); } -static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUGO, +static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUSR, asd_show_update_bios, asd_store_update_bios); static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index c1f72c49196f..6c7e0339dda4 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -56,6 +56,8 @@ BFA_TRC_FILE(CNA, IOC); #define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc)) #define bfa_ioc_notify_fail(__ioc) \ ((__ioc)->ioc_hwif->ioc_notify_fail(__ioc)) +#define bfa_ioc_sync_start(__ioc) \ + ((__ioc)->ioc_hwif->ioc_sync_start(__ioc)) #define bfa_ioc_sync_join(__ioc) \ ((__ioc)->ioc_hwif->ioc_sync_join(__ioc)) #define bfa_ioc_sync_leave(__ioc) \ @@ -647,7 +649,7 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf_s *iocpf, enum iocpf_event event) switch (event) { case IOCPF_E_SEMLOCKED: if (bfa_ioc_firmware_lock(ioc)) { - if (bfa_ioc_sync_complete(ioc)) { + if (bfa_ioc_sync_start(ioc)) { iocpf->retry_count = 0; bfa_ioc_sync_join(ioc); bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit); diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h index ec9cf08b0e7f..c85182a704fb 100644 --- a/drivers/scsi/bfa/bfa_ioc.h +++ b/drivers/scsi/bfa/bfa_ioc.h @@ -263,6 +263,7 @@ struct bfa_ioc_hwif_s { bfa_boolean_t msix); void (*ioc_notify_fail) (struct bfa_ioc_s *ioc); void (*ioc_ownership_reset) (struct bfa_ioc_s *ioc); + bfa_boolean_t (*ioc_sync_start) (struct bfa_ioc_s *ioc); void (*ioc_sync_join) (struct bfa_ioc_s *ioc); void (*ioc_sync_leave) (struct bfa_ioc_s *ioc); void (*ioc_sync_ack) (struct bfa_ioc_s *ioc); diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c index e4a0713185b6..89ae4c8f95a2 100644 --- a/drivers/scsi/bfa/bfa_ioc_cb.c +++ b/drivers/scsi/bfa/bfa_ioc_cb.c @@ -32,6 +32,7 @@ static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix); static void bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc); +static bfa_boolean_t bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc); @@ -53,6 +54,7 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc) hwif_cb.ioc_isr_mode_set = bfa_ioc_cb_isr_mode_set; hwif_cb.ioc_notify_fail = bfa_ioc_cb_notify_fail; hwif_cb.ioc_ownership_reset = bfa_ioc_cb_ownership_reset; + hwif_cb.ioc_sync_start = bfa_ioc_cb_sync_start; hwif_cb.ioc_sync_join = bfa_ioc_cb_sync_join; hwif_cb.ioc_sync_leave = bfa_ioc_cb_sync_leave; hwif_cb.ioc_sync_ack = bfa_ioc_cb_sync_ack; @@ -195,6 +197,15 @@ bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix) } /* + * Synchronized IOC failure processing routines + */ +static bfa_boolean_t +bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc) +{ + return bfa_ioc_cb_sync_complete(ioc); +} + +/* * Cleanup hw semaphore and usecnt registers */ static void diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c index 008d129ddfcd..93612520f0d2 100644 --- a/drivers/scsi/bfa/bfa_ioc_ct.c +++ b/drivers/scsi/bfa/bfa_ioc_ct.c @@ -41,6 +41,7 @@ static void bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix); static void bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc); +static bfa_boolean_t bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc); @@ -62,6 +63,7 @@ bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc) hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set; hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail; hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset; + hwif_ct.ioc_sync_start = bfa_ioc_ct_sync_start; hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join; hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave; hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack; @@ -351,6 +353,30 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc) writel(1, ioc->ioc_regs.ioc_sem_reg); } +static bfa_boolean_t +bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc) +{ + uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); + uint32_t sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); + + /* + * Driver load time. If the sync required bit for this PCI fn + * is set, it is due to an unclean exit by the driver for this + * PCI fn in the previous incarnation. Whoever comes here first + * should clean it up, no matter which PCI fn. + */ + + if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) { + writel(0, ioc->ioc_regs.ioc_fail_sync); + writel(1, ioc->ioc_regs.ioc_usage_reg); + writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate); + writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate); + return BFA_TRUE; + } + + return bfa_ioc_ct_sync_complete(ioc); +} + /* * Synchronized IOC failure processing routines */ diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index cfd59023227b..6bdd25a93db9 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -66,11 +66,11 @@ #define BD_SPLIT_SIZE 32768 /* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */ -#define BNX2I_SQ_WQES_MIN 16 -#define BNX2I_570X_SQ_WQES_MAX 128 -#define BNX2I_5770X_SQ_WQES_MAX 512 -#define BNX2I_570X_SQ_WQES_DEFAULT 128 -#define BNX2I_5770X_SQ_WQES_DEFAULT 256 +#define BNX2I_SQ_WQES_MIN 16 +#define BNX2I_570X_SQ_WQES_MAX 128 +#define BNX2I_5770X_SQ_WQES_MAX 512 +#define BNX2I_570X_SQ_WQES_DEFAULT 128 +#define BNX2I_5770X_SQ_WQES_DEFAULT 128 #define BNX2I_570X_CQ_WQES_MAX 128 #define BNX2I_5770X_CQ_WQES_MAX 512 @@ -115,6 +115,7 @@ #define BNX2X_MAX_CQS 8 #define CNIC_ARM_CQE 1 +#define CNIC_ARM_CQE_FP 2 #define CNIC_DISARM_CQE 0 #define REG_RD(__hba, offset) \ @@ -666,7 +667,9 @@ enum { * after HBA reset is completed by bnx2i/cnic/bnx2 * modules * @state: tracks offload connection state machine - * @teardown_mode: indicates if conn teardown is abortive or orderly + * @timestamp: tracks the start time when the ep begins to connect + * @num_active_cmds: tracks the number of outstanding commands for this ep + * @ec_shift: the amount of shift as part of the event coal calc * @qp: QP information * @ids: contains chip allocated *context id* & driver assigned * *iscsi cid* @@ -685,6 +688,7 @@ struct bnx2i_endpoint { u32 state; unsigned long timestamp; int num_active_cmds; + u32 ec_shift; struct qp_info qp; struct ep_handles ids; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index f0b89513faed..5c54a2d9b834 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -138,7 +138,6 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) u16 next_index; u32 num_active_cmds; - /* Coalesce CQ entries only on 10G devices */ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) return; @@ -148,16 +147,19 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) * interrupts and other unwanted results */ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; - if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) - return; - if (action == CNIC_ARM_CQE) { + if (action != CNIC_ARM_CQE_FP) + if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) + return; + + if (action == CNIC_ARM_CQE || action == CNIC_ARM_CQE_FP) { num_active_cmds = ep->num_active_cmds; if (num_active_cmds <= event_coal_min) next_index = 1; else next_index = event_coal_min + - (num_active_cmds - event_coal_min) / event_coal_div; + ((num_active_cmds - event_coal_min) >> + ep->ec_shift); if (!next_index) next_index = 1; cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1; @@ -1274,6 +1276,7 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) iscsi_init.dummy_buffer_addr_hi = (u32) ((u64) hba->dummy_buf_dma >> 32); + hba->num_ccell = hba->max_sqes >> 1; hba->ctx_ccell_tasks = ((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16)); iscsi_init.num_ccells_per_conn = hba->num_ccell; @@ -1934,7 +1937,6 @@ cqe_out: qp->cq_cons_idx++; } } - bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE); } /** @@ -1948,22 +1950,23 @@ cqe_out: static void bnx2i_fastpath_notification(struct bnx2i_hba *hba, struct iscsi_kcqe *new_cqe_kcqe) { - struct bnx2i_conn *conn; + struct bnx2i_conn *bnx2i_conn; u32 iscsi_cid; iscsi_cid = new_cqe_kcqe->iscsi_conn_id; - conn = bnx2i_get_conn_from_id(hba, iscsi_cid); + bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid); - if (!conn) { + if (!bnx2i_conn) { printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid); return; } - if (!conn->ep) { + if (!bnx2i_conn->ep) { printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid); return; } - - bnx2i_process_new_cqes(conn); + bnx2i_process_new_cqes(bnx2i_conn); + bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE_FP); + bnx2i_process_new_cqes(bnx2i_conn); } diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 1d24a2819736..6adbdc34a9a5 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -244,7 +244,7 @@ void bnx2i_stop(void *handle) wait_event_interruptible_timeout(hba->eh_wait, (list_empty(&hba->ep_ofld_list) && list_empty(&hba->ep_destroy_list)), - 10 * HZ); + 2 * HZ); /* Wait for all endpoints to be torn down, Chip will be reset once * control returns to network driver. So it is required to cleanup and * release all connection resources before returning from this routine. diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 1809f9ccc4ce..041928b23cb0 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -379,6 +379,7 @@ static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba) { struct iscsi_endpoint *ep; struct bnx2i_endpoint *bnx2i_ep; + u32 ec_div; ep = iscsi_create_endpoint(sizeof(*bnx2i_ep)); if (!ep) { @@ -393,6 +394,11 @@ static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba) bnx2i_ep->ep_iscsi_cid = (u16) -1; bnx2i_ep->hba = hba; bnx2i_ep->hba_age = hba->age; + + ec_div = event_coal_div; + while (ec_div >>= 1) + bnx2i_ep->ec_shift += 1; + hba->ofld_conns_active++; init_waitqueue_head(&bnx2i_ep->ofld_wait); return ep; @@ -858,7 +864,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) mutex_init(&hba->net_dev_lock); init_waitqueue_head(&hba->eh_wait); if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) { - hba->hba_shutdown_tmo = 20 * HZ; + hba->hba_shutdown_tmo = 30 * HZ; hba->conn_teardown_tmo = 20 * HZ; hba->conn_ctx_destroy_tmo = 6 * HZ; } else { /* 5706/5708/5709 */ @@ -1208,6 +1214,9 @@ static int bnx2i_task_xmit(struct iscsi_task *task) struct bnx2i_cmd *cmd = task->dd_data; struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr; + if (bnx2i_conn->ep->num_active_cmds + 1 > hba->max_sqes) + return -ENOMEM; + /* * If there is no scsi_cmnd this must be a mgmt task */ @@ -2156,7 +2165,7 @@ static struct scsi_host_template bnx2i_host_template = { .change_queue_depth = iscsi_change_queue_depth, .can_queue = 1024, .max_sectors = 127, - .cmd_per_lun = 32, + .cmd_per_lun = 24, .this_id = -1, .use_clustering = ENABLE_CLUSTERING, .sg_tablesize = ISCSI_MAX_BDS_PER_CMD, diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index cc23bd9480b2..155d7b9bdeae 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -137,6 +137,7 @@ static int fcoe_vport_create(struct fc_vport *, bool disabled); static int fcoe_vport_disable(struct fc_vport *, bool disable); static void fcoe_set_vport_symbolic_name(struct fc_vport *); static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *); +static int fcoe_validate_vport_create(struct fc_vport *); static struct libfc_function_template fcoe_libfc_fcn_templ = { .frame_send = fcoe_xmit, @@ -2351,6 +2352,17 @@ static int fcoe_vport_create(struct fc_vport *vport, bool disabled) struct fcoe_interface *fcoe = port->priv; struct net_device *netdev = fcoe->netdev; struct fc_lport *vn_port; + int rc; + char buf[32]; + + rc = fcoe_validate_vport_create(vport); + if (rc) { + wwn_to_str(vport->port_name, buf, sizeof(buf)); + printk(KERN_ERR "fcoe: Failed to create vport, " + "WWPN (0x%s) already exists\n", + buf); + return rc; + } mutex_lock(&fcoe_config_mutex); vn_port = fcoe_if_create(fcoe, &vport->dev, 1); @@ -2497,3 +2509,49 @@ static void fcoe_set_port_id(struct fc_lport *lport, if (fp && fc_frame_payload_op(fp) == ELS_FLOGI) fcoe_ctlr_recv_flogi(&fcoe->ctlr, lport, fp); } + +/** + * fcoe_validate_vport_create() - Validate a vport before creating it + * @vport: NPIV port to be created + * + * This routine is meant to add validation for a vport before creating it + * via fcoe_vport_create(). + * Current validations are: + * - WWPN supplied is unique for given lport + * + * +*/ +static int fcoe_validate_vport_create(struct fc_vport *vport) +{ + struct Scsi_Host *shost = vport_to_shost(vport); + struct fc_lport *n_port = shost_priv(shost); + struct fc_lport *vn_port; + int rc = 0; + char buf[32]; + + mutex_lock(&n_port->lp_mutex); + + wwn_to_str(vport->port_name, buf, sizeof(buf)); + /* Check if the wwpn is not same as that of the lport */ + if (!memcmp(&n_port->wwpn, &vport->port_name, sizeof(u64))) { + FCOE_DBG("vport WWPN 0x%s is same as that of the " + "base port WWPN\n", buf); + rc = -EINVAL; + goto out; + } + + /* Check if there is any existing vport with same wwpn */ + list_for_each_entry(vn_port, &n_port->vports, list) { + if (!memcmp(&vn_port->wwpn, &vport->port_name, sizeof(u64))) { + FCOE_DBG("vport with given WWPN 0x%s already " + "exists\n", buf); + rc = -EINVAL; + break; + } + } + +out: + mutex_unlock(&n_port->lp_mutex); + + return rc; +} diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index 408a6fd78fb4..c4a93993c0cf 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -99,4 +99,14 @@ static inline struct net_device *fcoe_netdev(const struct fc_lport *lport) ((struct fcoe_port *)lport_priv(lport))->priv)->netdev; } +static inline void wwn_to_str(u64 wwn, char *buf, int len) +{ + u8 wwpn[8]; + + u64_to_wwn(wwn, wwpn); + snprintf(buf, len, "%02x%02x%02x%02x%02x%02x%02x%02x", + wwpn[0], wwpn[1], wwpn[2], wwpn[3], + wwpn[4], wwpn[5], wwpn[6], wwpn[7]); +} + #endif /* _FCOE_H_ */ diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 229e4af5508a..c74c4b8e71ef 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1173,7 +1173,9 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, struct fc_lport *lport = fip->lp; struct fc_lport *vn_port = NULL; u32 desc_mask; - int is_vn_port = 0; + int num_vlink_desc; + int reset_phys_port = 0; + struct fip_vn_desc **vlink_desc_arr = NULL; LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n"); @@ -1183,70 +1185,73 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, /* * mask of required descriptors. Validating each one clears its bit. */ - desc_mask = BIT(FIP_DT_MAC) | BIT(FIP_DT_NAME) | BIT(FIP_DT_VN_ID); + desc_mask = BIT(FIP_DT_MAC) | BIT(FIP_DT_NAME); rlen = ntohs(fh->fip_dl_len) * FIP_BPW; desc = (struct fip_desc *)(fh + 1); + + /* + * Actually need to subtract 'sizeof(*mp) - sizeof(*wp)' from 'rlen' + * before determining max Vx_Port descriptor but a buggy FCF could have + * omited either or both MAC Address and Name Identifier descriptors + */ + num_vlink_desc = rlen / sizeof(*vp); + if (num_vlink_desc) + vlink_desc_arr = kmalloc(sizeof(vp) * num_vlink_desc, + GFP_ATOMIC); + if (!vlink_desc_arr) + return; + num_vlink_desc = 0; + while (rlen >= sizeof(*desc)) { dlen = desc->fip_dlen * FIP_BPW; if (dlen > rlen) - return; + goto err; /* Drop CVL if there are duplicate critical descriptors */ if ((desc->fip_dtype < 32) && + (desc->fip_dtype != FIP_DT_VN_ID) && !(desc_mask & 1U << desc->fip_dtype)) { LIBFCOE_FIP_DBG(fip, "Duplicate Critical " "Descriptors in FIP CVL\n"); - return; + goto err; } switch (desc->fip_dtype) { case FIP_DT_MAC: mp = (struct fip_mac_desc *)desc; if (dlen < sizeof(*mp)) - return; + goto err; if (compare_ether_addr(mp->fd_mac, fcf->fcf_mac)) - return; + goto err; desc_mask &= ~BIT(FIP_DT_MAC); break; case FIP_DT_NAME: wp = (struct fip_wwn_desc *)desc; if (dlen < sizeof(*wp)) - return; + goto err; if (get_unaligned_be64(&wp->fd_wwn) != fcf->switch_name) - return; + goto err; desc_mask &= ~BIT(FIP_DT_NAME); break; case FIP_DT_VN_ID: vp = (struct fip_vn_desc *)desc; if (dlen < sizeof(*vp)) - return; - if (compare_ether_addr(vp->fd_mac, - fip->get_src_addr(lport)) == 0 && - get_unaligned_be64(&vp->fd_wwpn) == lport->wwpn && - ntoh24(vp->fd_fc_id) == lport->port_id) { - desc_mask &= ~BIT(FIP_DT_VN_ID); - break; + goto err; + vlink_desc_arr[num_vlink_desc++] = vp; + vn_port = fc_vport_id_lookup(lport, + ntoh24(vp->fd_fc_id)); + if (vn_port && (vn_port == lport)) { + mutex_lock(&fip->ctlr_mutex); + per_cpu_ptr(lport->dev_stats, + get_cpu())->VLinkFailureCount++; + put_cpu(); + fcoe_ctlr_reset(fip); + mutex_unlock(&fip->ctlr_mutex); } - /* check if clr_vlink is for NPIV port */ - mutex_lock(&lport->lp_mutex); - list_for_each_entry(vn_port, &lport->vports, list) { - if (compare_ether_addr(vp->fd_mac, - fip->get_src_addr(vn_port)) == 0 && - (get_unaligned_be64(&vp->fd_wwpn) - == vn_port->wwpn) && - (ntoh24(vp->fd_fc_id) == - fc_host_port_id(vn_port->host))) { - desc_mask &= ~BIT(FIP_DT_VN_ID); - is_vn_port = 1; - break; - } - } - mutex_unlock(&lport->lp_mutex); - break; default: /* standard says ignore unknown descriptors >= 128 */ if (desc->fip_dtype < FIP_DT_VENDOR_BASE) - return; + goto err; break; } desc = (struct fip_desc *)((char *)desc + dlen); @@ -1256,26 +1261,68 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, /* * reset only if all required descriptors were present and valid. */ - if (desc_mask) { + if (desc_mask) LIBFCOE_FIP_DBG(fip, "missing descriptors mask %x\n", desc_mask); + else if (!num_vlink_desc) { + LIBFCOE_FIP_DBG(fip, "CVL: no Vx_Port descriptor found\n"); + /* + * No Vx_Port description. Clear all NPIV ports, + * followed by physical port + */ + mutex_lock(&lport->lp_mutex); + list_for_each_entry(vn_port, &lport->vports, list) + fc_lport_reset(vn_port); + mutex_unlock(&lport->lp_mutex); + + mutex_lock(&fip->ctlr_mutex); + per_cpu_ptr(lport->dev_stats, + get_cpu())->VLinkFailureCount++; + put_cpu(); + fcoe_ctlr_reset(fip); + mutex_unlock(&fip->ctlr_mutex); + + fc_lport_reset(fip->lp); + fcoe_ctlr_solicit(fip, NULL); } else { - LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n"); + int i; - if (is_vn_port) - fc_lport_reset(vn_port); - else { - mutex_lock(&fip->ctlr_mutex); - per_cpu_ptr(lport->dev_stats, - get_cpu())->VLinkFailureCount++; - put_cpu(); - fcoe_ctlr_reset(fip); - mutex_unlock(&fip->ctlr_mutex); + LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n"); + for (i = 0; i < num_vlink_desc; i++) { + vp = vlink_desc_arr[i]; + vn_port = fc_vport_id_lookup(lport, + ntoh24(vp->fd_fc_id)); + if (!vn_port) + continue; + + /* + * 'port_id' is already validated, check MAC address and + * wwpn + */ + if (compare_ether_addr(fip->get_src_addr(vn_port), + vp->fd_mac) != 0 || + get_unaligned_be64(&vp->fd_wwpn) != + vn_port->wwpn) + continue; + + if (vn_port == lport) + /* + * Physical port, defer processing till all + * listed NPIV ports are cleared + */ + reset_phys_port = 1; + else /* NPIV port */ + fc_lport_reset(vn_port); + } + if (reset_phys_port) { fc_lport_reset(fip->lp); fcoe_ctlr_solicit(fip, NULL); } } + +err: + kfree(vlink_desc_arr); } /** diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c index f81f77c8569e..41068e8748e7 100644 --- a/drivers/scsi/fcoe/fcoe_transport.c +++ b/drivers/scsi/fcoe/fcoe_transport.c @@ -544,16 +544,6 @@ static int fcoe_transport_create(const char *buffer, struct kernel_param *kp) struct fcoe_transport *ft = NULL; enum fip_state fip_mode = (enum fip_state)(long)kp->arg; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -618,16 +608,6 @@ static int fcoe_transport_destroy(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -672,16 +652,6 @@ static int fcoe_transport_disable(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -720,16 +690,6 @@ static int fcoe_transport_enable(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 12868ca46110..888086c4e709 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5149,21 +5149,21 @@ static irqreturn_t ipr_isr(int irq, void *devp) if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ + num_hrrq = 0; do { writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); } while (int_reg & IPR_PCII_HRRQ_UPDATED && num_hrrq++ < IPR_MAX_HRRQ_RETRIES); - if (int_reg & IPR_PCII_HRRQ_UPDATED) { - ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); - spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - return IRQ_HANDLED; - } - } else if (rc == IRQ_NONE && irq_none == 0) { int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); irq_none++; + } else if (num_hrrq == IPR_MAX_HRRQ_RETRIES && + int_reg & IPR_PCII_HRRQ_UPDATED) { + ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return IRQ_HANDLED; } else break; } diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 911b2736cafa..b9cb8140b398 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -205,6 +205,7 @@ static void fc_disc_recv_req(struct fc_lport *lport, struct fc_frame *fp) default: FC_DISC_DBG(disc, "Received an unsupported request, " "the opcode is (%x)\n", op); + fc_frame_free(fp); break; } } diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 77035a746f60..3b8a6451ea28 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1434,6 +1434,7 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { spin_lock_bh(&ep->ex_lock); + resp = ep->resp; rc = fc_exch_done_locked(ep); WARN_ON(fc_seq_exch(sp) != ep); spin_unlock_bh(&ep->ex_lock); @@ -1978,6 +1979,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, spin_unlock_bh(&ep->ex_lock); return sp; err: + fc_fcp_ddp_done(fr_fsp(fp)); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 2a3a4720a771..9cd2149519ac 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -312,7 +312,7 @@ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) * DDP related resources for a fcp_pkt * @fsp: The FCP packet that DDP had been used on */ -static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) +void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) { struct fc_lport *lport; @@ -681,8 +681,7 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, error = lport->tt.seq_send(lport, seq, fp); if (error) { WARN_ON(1); /* send error should be rare */ - fc_fcp_retry_cmd(fsp); - return 0; + return error; } fp = NULL; } @@ -1673,7 +1672,8 @@ static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) FC_FCTL_REQ, 0); rec_tov = get_fsp_rec_tov(fsp); - seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL, + seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, + fc_fcp_pkt_destroy, fsp, jiffies_to_msecs(rec_tov)); if (!seq) goto retry; @@ -1720,7 +1720,6 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) return; } - fsp->recov_seq = NULL; switch (fc_frame_payload_op(fp)) { case ELS_LS_ACC: fsp->recov_retry = 0; @@ -1732,10 +1731,9 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) break; } fc_fcp_unlock_pkt(fsp); - fsp->lp->tt.exch_done(seq); out: + fsp->lp->tt.exch_done(seq); fc_frame_free(fp); - fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ } /** @@ -1747,8 +1745,6 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) { if (fc_fcp_lock_pkt(fsp)) goto out; - fsp->lp->tt.exch_done(fsp->recov_seq); - fsp->recov_seq = NULL; switch (PTR_ERR(fp)) { case -FC_EX_TIMEOUT: if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) @@ -1764,7 +1760,7 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) } fc_fcp_unlock_pkt(fsp); out: - fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ + fsp->lp->tt.exch_done(fsp->recov_seq); } /** diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h index fedc819d70c0..c7d071289af5 100644 --- a/drivers/scsi/libfc/fc_libfc.h +++ b/drivers/scsi/libfc/fc_libfc.h @@ -108,6 +108,7 @@ extern struct fc4_prov fc_rport_fcp_init; /* FCP initiator provider */ * Set up direct-data placement for this I/O request */ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid); +void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp); /* * Module setup functions diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 31fc21f4d831..db9238f2ecb8 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -99,19 +99,29 @@ static void sas_ata_task_done(struct sas_task *task) struct sas_ha_struct *sas_ha; enum ata_completion_errors ac; unsigned long flags; + struct ata_link *link; if (!qc) goto qc_already_gone; dev = qc->ap->private_data; sas_ha = dev->port->ha; + link = &dev->sata_dev.ap->link; spin_lock_irqsave(dev->sata_dev.ap->lock, flags); if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || ((stat->stat == SAM_STAT_CHECK_CONDITION && dev->sata_dev.command_set == ATAPI_COMMAND_SET))) { ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf); - qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + + if (!link->sactive) { + qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + } else { + link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command); + if (unlikely(link->eh_info.err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + } + dev->sata_dev.sstatus = resp->sstatus; dev->sata_dev.serror = resp->serror; dev->sata_dev.scontrol = resp->scontrol; @@ -121,7 +131,13 @@ static void sas_ata_task_done(struct sas_task *task) SAS_DPRINTK("%s: SAS error %x\n", __func__, stat->stat); /* We saw a SAS error. Send a vague error. */ - qc->err_mask = ac; + if (!link->sactive) { + qc->err_mask = ac; + } else { + link->eh_info.err_mask |= AC_ERR_DEV; + qc->flags |= ATA_QCFLAG_FAILED; + } + dev->sata_dev.tf.feature = 0x04; /* status err */ dev->sata_dev.tf.command = ATA_ERR; } @@ -279,6 +295,44 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, return ret; } +static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct domain_device *dev = ap->private_data; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + int res = TMF_RESP_FUNC_FAILED; + int ret = 0; + + if (i->dft->lldd_ata_soft_reset) + res = i->dft->lldd_ata_soft_reset(dev); + + if (res != TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("%s: Unable to soft reset\n", __func__); + ret = -EAGAIN; + } + + switch (dev->sata_dev.command_set) { + case ATA_COMMAND_SET: + SAS_DPRINTK("%s: Found ATA device.\n", __func__); + *class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); + *class = ATA_DEV_ATAPI; + break; + default: + SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", + __func__, dev->sata_dev.command_set); + *class = ATA_DEV_UNKNOWN; + break; + } + + ap->cbl = ATA_CBL_SATA; + return ret; +} + static void sas_ata_post_internal(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -309,7 +363,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) static struct ata_port_operations sas_sata_ops = { .prereset = ata_std_prereset, - .softreset = NULL, + .softreset = sas_ata_soft_reset, .hardreset = sas_ata_hard_reset, .postreset = ata_std_postreset, .error_handler = ata_std_error_handler, diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 8b538bd1ff2b..14e21b5fb8ba 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -57,7 +57,7 @@ int sas_init_queue(struct sas_ha_struct *sas_ha); int sas_init_events(struct sas_ha_struct *sas_ha); void sas_shutdown_queue(struct sas_ha_struct *sas_ha); -void sas_deform_port(struct asd_sas_phy *phy); +void sas_deform_port(struct asd_sas_phy *phy, int gone); void sas_porte_bytes_dmaed(struct work_struct *work); void sas_porte_broadcast_rcvd(struct work_struct *work); diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index b459c4b635b1..e0f5018e9071 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -39,7 +39,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock, &phy->phy_events_pending); phy->error = 0; - sas_deform_port(phy); + sas_deform_port(phy, 1); } static void sas_phye_oob_done(struct work_struct *work) @@ -66,7 +66,7 @@ static void sas_phye_oob_error(struct work_struct *work) sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock, &phy->phy_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); if (!port && phy->enabled && i->dft->lldd_control_phy) { phy->error++; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 5257fdfe699a..42fd1f25b664 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -57,7 +57,7 @@ static void sas_form_port(struct asd_sas_phy *phy) if (port) { if (!phy_is_wideport_member(port, phy)) - sas_deform_port(phy); + sas_deform_port(phy, 0); else { SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n", __func__, phy->id, phy->port->id, @@ -153,28 +153,31 @@ static void sas_form_port(struct asd_sas_phy *phy) * This is called when the physical link to the other phy has been * lost (on this phy), in Event thread context. We cannot delay here. */ -void sas_deform_port(struct asd_sas_phy *phy) +void sas_deform_port(struct asd_sas_phy *phy, int gone) { struct sas_ha_struct *sas_ha = phy->ha; struct asd_sas_port *port = phy->port; struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt); + struct domain_device *dev; unsigned long flags; if (!port) return; /* done by a phy event */ - if (port->port_dev) - port->port_dev->pathways--; + dev = port->port_dev; + if (dev) + dev->pathways--; if (port->num_phys == 1) { + if (dev && gone) + dev->gone = 1; sas_unregister_domain_devices(port); sas_port_delete(port->port); port->port = NULL; } else sas_port_delete_phy(port->port, phy->phy); - if (si->dft->lldd_port_deformed) si->dft->lldd_port_deformed(phy); @@ -244,7 +247,7 @@ void sas_porte_link_reset_err(struct work_struct *work) sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } void sas_porte_timer_event(struct work_struct *work) @@ -256,7 +259,7 @@ void sas_porte_timer_event(struct work_struct *work) sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } void sas_porte_hard_reset(struct work_struct *work) @@ -268,7 +271,7 @@ void sas_porte_hard_reset(struct work_struct *work) sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } /* ---------- SAS port registration ---------- */ @@ -306,6 +309,6 @@ void sas_unregister_ports(struct sas_ha_struct *sas_ha) for (i = 0; i < sas_ha->num_phys; i++) if (sas_ha->sas_phy[i]->port) - sas_deform_port(sas_ha->sas_phy[i]); + sas_deform_port(sas_ha->sas_phy[i], 0); } diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index f6e189f40917..eeba76cdf774 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -207,6 +207,13 @@ static int sas_queuecommand_lck(struct scsi_cmnd *cmd, struct sas_ha_struct *sas_ha = dev->port->ha; struct sas_task *task; + /* If the device fell off, no sense in issuing commands */ + if (dev->gone) { + cmd->result = DID_BAD_TARGET << 16; + scsi_done(cmd); + goto out; + } + if (dev_is_sata(dev)) { unsigned long flags; @@ -216,13 +223,6 @@ static int sas_queuecommand_lck(struct scsi_cmnd *cmd, goto out; } - /* If the device fell off, no sense in issuing commands */ - if (dev->gone) { - cmd->result = DID_BAD_TARGET << 16; - scsi_done(cmd); - goto out; - } - res = -ENOMEM; task = sas_create_task(cmd, dev, GFP_ATOMIC); if (!task) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 02d53d89534f..8ec2c86a49d4 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -41,6 +41,7 @@ struct lpfc_sli2_slim; downloads using bsg */ #define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */ #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */ +#define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */ #define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ @@ -486,6 +487,42 @@ struct unsol_rcv_ct_ctx { (1 << LPFC_USER_LINK_SPEED_AUTO)) #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16" +enum nemb_type { + nemb_mse = 1, + nemb_hbd +}; + +enum mbox_type { + mbox_rd = 1, + mbox_wr +}; + +enum dma_type { + dma_mbox = 1, + dma_ebuf +}; + +enum sta_type { + sta_pre_addr = 1, + sta_pos_addr +}; + +struct lpfc_mbox_ext_buf_ctx { + uint32_t state; +#define LPFC_BSG_MBOX_IDLE 0 +#define LPFC_BSG_MBOX_HOST 1 +#define LPFC_BSG_MBOX_PORT 2 +#define LPFC_BSG_MBOX_DONE 3 +#define LPFC_BSG_MBOX_ABTS 4 + enum nemb_type nembType; + enum mbox_type mboxType; + uint32_t numBuf; + uint32_t mbxTag; + uint32_t seqNum; + struct lpfc_dmabuf *mbx_dmabuf; + struct list_head ext_dmabuf_list; +}; + struct lpfc_hba { /* SCSI interface function jump table entries */ int (*lpfc_new_scsi_buf) @@ -589,6 +626,7 @@ struct lpfc_hba { MAILBOX_t *mbox; uint32_t *mbox_ext; + struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx; uint32_t ha_copy; struct _PCB *pcb; struct _IOCB *IOCBs; @@ -659,6 +697,7 @@ struct lpfc_hba { uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; uint32_t cfg_aer_support; + uint32_t cfg_sriov_nr_virtfn; uint32_t cfg_iocb_cnt; uint32_t cfg_suppress_link_up; #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */ @@ -706,7 +745,6 @@ struct lpfc_hba { uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */ int brd_no; /* FC board number */ - char SerialNumber[32]; /* adapter Serial Number */ char OptionROMVersion[32]; /* adapter BIOS / Fcode version */ char ModelDesc[256]; /* Model Description */ @@ -778,6 +816,9 @@ struct lpfc_hba { uint16_t vpi_base; uint16_t vfi_base; unsigned long *vpi_bmask; /* vpi allocation table */ + uint16_t *vpi_ids; + uint16_t vpi_count; + struct list_head lpfc_vpi_blk_list; /* Data structure used by fabric iocb scheduler */ struct list_head fabric_iocb_list; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8dcbf8fff673..135a53baa735 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -755,6 +755,73 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** + * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc + * @phba: lpfc_hba pointer. + * + * Description: + * Request SLI4 interface type-2 device to perform a physical register set + * access. + * + * Returns: + * zero for success + **/ +static ssize_t +lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) +{ + struct completion online_compl; + uint32_t reg_val; + int status = 0; + int rc; + + if (!phba->cfg_enable_hba_reset) + return -EIO; + + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + + if (status != 0) + return status; + + /* wait for the device to be quiesced before firmware reset */ + msleep(100); + + reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + + if (opcode == LPFC_FW_DUMP) + reg_val |= LPFC_FW_DUMP_REQUEST; + else if (opcode == LPFC_FW_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_FRST; + else if (opcode == LPFC_DV_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_DRST; + + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + /* flush */ + readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); + + /* delay driver action following IF_TYPE_2 reset */ + msleep(100); + + init_completion(&online_compl); + rc = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (rc == 0) + return -ENOMEM; + + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + return 0; +} + +/** * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. @@ -848,6 +915,12 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, return -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_KILL); + else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); + else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); + else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); else return -EINVAL; @@ -1322,6 +1395,102 @@ lpfc_dss_show(struct device *dev, struct device_attribute *attr, } /** + * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted support level. + * + * Description: + * Returns the maximum number of virtual functions a physical function can + * support, 0 will be returned if called on virtual function. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_sriov_hw_max_virtfn_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct pci_dev *pdev = phba->pcidev; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + LPFC_MBOXQ_t *mboxq; + struct lpfc_mbx_get_prof_cfg *get_prof_cfg; + struct lpfc_rsrc_desc_pcie *desc; + uint32_t max_nr_virtfn; + uint32_t desc_count; + int length, rc, i; + + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + + if (!pdev->is_physfn) + return snprintf(buf, PAGE_SIZE, "%d\n", 0); + + mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) + return -ENOMEM; + + /* get the maximum number of virtfn support by physfn */ + length = (sizeof(struct lpfc_mbx_get_prof_cfg) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG, + length, LPFC_SLI4_MBX_EMBED); + shdr = (union lpfc_sli4_cfg_shdr *) + &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; + bf_set(lpfc_mbox_hdr_pf_num, &shdr->request, + phba->sli4_hba.iov.pf_number + 1); + + get_prof_cfg = &mboxq->u.mqe.un.get_prof_cfg; + bf_set(lpfc_mbx_get_prof_cfg_prof_tp, &get_prof_cfg->u.request, + LPFC_CFG_TYPE_CURRENT_ACTIVE); + + rc = lpfc_sli_issue_mbox_wait(phba, mboxq, + lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG)); + + if (rc != MBX_TIMEOUT) { + /* check return status */ + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (shdr_status || shdr_add_status || rc) + goto error_out; + + } else + goto error_out; + + desc_count = get_prof_cfg->u.response.prof_cfg.rsrc_desc_count; + + for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) { + desc = (struct lpfc_rsrc_desc_pcie *) + &get_prof_cfg->u.response.prof_cfg.desc[i]; + if (LPFC_RSRC_DESC_TYPE_PCIE == + bf_get(lpfc_rsrc_desc_pcie_type, desc)) { + max_nr_virtfn = bf_get(lpfc_rsrc_desc_pcie_nr_virtfn, + desc); + break; + } + } + + if (i < LPFC_RSRC_DESC_MAX_NUM) { + if (rc != MBX_TIMEOUT) + mempool_free(mboxq, phba->mbox_mem_pool); + return snprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); + } + +error_out: + if (rc != MBX_TIMEOUT) + mempool_free(mboxq, phba->mbox_mem_pool); + return -EIO; +} + +/** * lpfc_param_show - Return a cfg attribute value in decimal * * Description: @@ -1762,6 +1931,8 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL); static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL); static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL); +static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO, + lpfc_sriov_hw_max_virtfn_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; @@ -3014,7 +3185,7 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing enable or disable aer flag. * @count: unused variable. * * Description: @@ -3098,7 +3269,7 @@ lpfc_param_show(aer_support) /** * lpfc_aer_support_init - Set the initial adapters aer support flag * @phba: lpfc_hba pointer. - * @val: link speed value. + * @val: enable aer or disable aer flag. * * Description: * If val is in a valid range [0,1], then set the adapter's initial @@ -3137,7 +3308,7 @@ static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR, * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing flag 1 for aer cleanup state. * @count: unused variable. * * Description: @@ -3180,6 +3351,136 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, lpfc_aer_cleanup_state); +/** + * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string the number of vfs to be enabled. + * @count: unused variable. + * + * Description: + * When this api is called either through user sysfs, the driver shall + * try to enable or disable SR-IOV virtual functions according to the + * following: + * + * If zero virtual function has been enabled to the physical function, + * the driver shall invoke the pci enable virtual function api trying + * to enable the virtual functions. If the nr_vfn provided is greater + * than the maximum supported, the maximum virtual function number will + * be used for invoking the api; otherwise, the nr_vfn provided shall + * be used for invoking the api. If the api call returned success, the + * actual number of virtual functions enabled will be set to the driver + * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver + * cfg_sriov_nr_virtfn remains zero. + * + * If none-zero virtual functions have already been enabled to the + * physical function, as reflected by the driver's cfg_sriov_nr_virtfn, + * -EINVAL will be returned and the driver does nothing; + * + * If the nr_vfn provided is zero and none-zero virtual functions have + * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the + * disabling virtual function api shall be invoded to disable all the + * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to + * zero. Otherwise, if zero virtual function has been enabled, do + * nothing. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct pci_dev *pdev = phba->pcidev; + int val = 0, rc = -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val < 0) + return -EINVAL; + + /* Request disabling virtual functions */ + if (val == 0) { + if (phba->cfg_sriov_nr_virtfn > 0) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + return strlen(buf); + } + + /* Request enabling virtual functions */ + if (phba->cfg_sriov_nr_virtfn > 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3018 There are %d virtual functions " + "enabled on physical function.\n", + phba->cfg_sriov_nr_virtfn); + return -EEXIST; + } + + if (val <= LPFC_MAX_VFN_PER_PFN) + phba->cfg_sriov_nr_virtfn = val; + else { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3019 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; + } + + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn); + if (rc) { + phba->cfg_sriov_nr_virtfn = 0; + rc = -EPERM; + } else + rc = strlen(buf); + + return rc; +} + +static int lpfc_sriov_nr_virtfn = LPFC_DEF_VFN_PER_PFN; +module_param(lpfc_sriov_nr_virtfn, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_sriov_nr_virtfn, "Enable PCIe device SR-IOV virtual fn"); +lpfc_param_show(sriov_nr_virtfn) + +/** + * lpfc_sriov_nr_virtfn_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0,255], then set the adapter's initial + * cfg_sriov_nr_virtfn field. If it's greater than the maximum, the maximum + * number shall be used instead. It will be up to the driver's probe_one + * routine to determine whether the device's SR-IOV is supported or not. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val) +{ + if (val >= 0 && val <= LPFC_MAX_VFN_PER_PFN) { + phba->cfg_sriov_nr_virtfn = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3017 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; +} +static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, + lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); + /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. @@ -3497,6 +3798,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_prot_sg_seg_cnt, &dev_attr_lpfc_aer_support, &dev_attr_lpfc_aer_state_cleanup, + &dev_attr_lpfc_sriov_nr_virtfn, &dev_attr_lpfc_suppress_link_up, &dev_attr_lpfc_iocb_cnt, &dev_attr_iocb_hw, @@ -3505,6 +3807,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_fips_level, &dev_attr_lpfc_fips_rev, &dev_attr_lpfc_dss, + &dev_attr_lpfc_sriov_hw_max_virtfn, NULL, }; @@ -3961,7 +4264,7 @@ static struct bin_attribute sysfs_mbox_attr = { .name = "mbox", .mode = S_IRUSR | S_IWUSR, }, - .size = MAILBOX_CMD_SIZE, + .size = MAILBOX_SYSFS_MAX, .read = sysfs_mbox_read, .write = sysfs_mbox_write, }; @@ -4705,6 +5008,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); lpfc_aer_support_init(phba, lpfc_aer_support); + lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt); phba->cfg_enable_dss = 1; diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 853e5042f39c..7fb0ba4cbfa7 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -23,6 +23,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/delay.h> +#include <linux/list.h> #include <scsi/scsi.h> #include <scsi/scsi_host.h> @@ -79,8 +80,7 @@ struct lpfc_bsg_iocb { struct lpfc_bsg_mbox { LPFC_MBOXQ_t *pmboxq; MAILBOX_t *mb; - struct lpfc_dmabuf *rxbmp; /* for BIU diags */ - struct lpfc_dmabufext *dmp; /* for BIU diags */ + struct lpfc_dmabuf *dmabuffers; /* for BIU diags */ uint8_t *ext; /* extended mailbox data */ uint32_t mbOffset; /* from app */ uint32_t inExtWLen; /* from app */ @@ -332,6 +332,8 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job) cmd->ulpLe = 1; cmd->ulpClass = CLASS3; cmd->ulpContext = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + cmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; cmd->ulpOwner = OWN_CHIP; cmdiocbq->vport = phba->pport; cmdiocbq->context3 = bmp; @@ -1336,6 +1338,10 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag, } icmd->un.ulpWord[3] = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + icmd->ulpContext = + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + /* The exchange is done, mark the entry as invalid */ phba->ct_ctx[tag].flags &= ~UNSOL_VALID; } else @@ -1463,11 +1469,91 @@ send_mgmt_rsp_exit: } /** - * lpfc_bsg_diag_mode - process a LPFC_BSG_VENDOR_DIAG_MODE bsg vendor command + * lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode + * @phba: Pointer to HBA context object. * @job: LPFC_BSG_VENDOR_DIAG_MODE * - * This function is responsible for placing a port into diagnostic loopback - * mode in order to perform a diagnostic loopback test. + * This function is responsible for preparing driver for diag loopback + * on device. + */ +static int +lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job) +{ + struct lpfc_vport **vports; + struct Scsi_Host *shost; + struct lpfc_sli *psli; + struct lpfc_sli_ring *pring; + int i = 0; + + psli = &phba->sli; + if (!psli) + return -ENODEV; + + pring = &psli->ring[LPFC_FCP_RING]; + if (!pring) + return -ENODEV; + + if ((phba->link_state == LPFC_HBA_ERROR) || + (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || + (!(psli->sli_flag & LPFC_SLI_ACTIVE))) + return -EACCES; + + vports = lpfc_create_vport_work_array(phba); + if (vports) { + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + scsi_block_requests(shost); + } + lpfc_destroy_vport_work_array(phba, vports); + } else { + shost = lpfc_shost_from_vport(phba->pport); + scsi_block_requests(shost); + } + + while (pring->txcmplq_cnt) { + if (i++ > 500) /* wait up to 5 seconds */ + break; + msleep(10); + } + return 0; +} + +/** + * lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for driver exit processing of setting up + * diag loopback mode on device. + */ +static void +lpfc_bsg_diag_mode_exit(struct lpfc_hba *phba) +{ + struct Scsi_Host *shost; + struct lpfc_vport **vports; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (vports) { + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + scsi_unblock_requests(shost); + } + lpfc_destroy_vport_work_array(phba, vports); + } else { + shost = lpfc_shost_from_vport(phba->pport); + scsi_unblock_requests(shost); + } + return; +} + +/** + * lpfc_sli3_bsg_diag_loopback_mode - process an sli3 bsg vendor command + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for placing an sli3 port into diagnostic + * loopback mode in order to perform a diagnostic loopback test. * All new scsi requests are blocked, a small delay is used to allow the * scsi requests to complete then the link is brought down. If the link is * is placed in loopback mode then scsi requests are again allowed @@ -1475,17 +1561,11 @@ send_mgmt_rsp_exit: * All of this is done in-line. */ static int -lpfc_bsg_diag_mode(struct fc_bsg_job *job) +lpfc_sli3_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) { - struct Scsi_Host *shost = job->shost; - struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; - struct lpfc_hba *phba = vport->phba; struct diag_mode_set *loopback_mode; - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING]; uint32_t link_flags; uint32_t timeout; - struct lpfc_vport **vports; LPFC_MBOXQ_t *pmboxq; int mbxstatus; int i = 0; @@ -1494,53 +1574,33 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *job) /* no data to return just the return code */ job->reply->reply_payload_rcv_len = 0; - if (job->request_len < - sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_set)) { + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set)) { lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2738 Received DIAG MODE request below minimum " - "size\n"); + "2738 Received DIAG MODE request size:%d " + "below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set))); rc = -EINVAL; goto job_error; } + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + /* bring the link to diagnostic mode */ loopback_mode = (struct diag_mode_set *) job->request->rqst_data.h_vendor.vendor_cmd; link_flags = loopback_mode->type; timeout = loopback_mode->timeout * 100; - if ((phba->link_state == LPFC_HBA_ERROR) || - (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || - (!(psli->sli_flag & LPFC_SLI_ACTIVE))) { - rc = -EACCES; - goto job_error; - } - pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) { rc = -ENOMEM; - goto job_error; - } - - vports = lpfc_create_vport_work_array(phba); - if (vports) { - for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { - shost = lpfc_shost_from_vport(vports[i]); - scsi_block_requests(shost); - } - - lpfc_destroy_vport_work_array(phba, vports); - } else { - shost = lpfc_shost_from_vport(phba->pport); - scsi_block_requests(shost); + goto loopback_mode_exit; } - - while (pring->txcmplq_cnt) { - if (i++ > 500) /* wait up to 5 seconds */ - break; - - msleep(10); - } - memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t)); pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; pmboxq->u.mb.mbxOwner = OWN_HOST; @@ -1594,22 +1654,186 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *job) rc = -ENODEV; loopback_mode_exit: - vports = lpfc_create_vport_work_array(phba); - if (vports) { - for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { - shost = lpfc_shost_from_vport(vports[i]); - scsi_unblock_requests(shost); + lpfc_bsg_diag_mode_exit(phba); + + /* + * Let SLI layer release mboxq if mbox command completed after timeout. + */ + if (mbxstatus != MBX_TIMEOUT) + mempool_free(pmboxq, phba->mbox_mem_pool); + +job_error: + /* make error code available to userspace */ + job->reply->result = rc; + /* complete the job back to userspace if no error */ + if (rc == 0) + job->job_done(job); + return rc; +} + +/** + * lpfc_sli4_bsg_set_link_diag_state - set sli4 link diag state + * @phba: Pointer to HBA context object. + * @diag: Flag for set link to diag or nomral operation state. + * + * This function is responsible for issuing a sli4 mailbox command for setting + * link to either diag state or normal operation state. + */ +static int +lpfc_sli4_bsg_set_link_diag_state(struct lpfc_hba *phba, uint32_t diag) +{ + LPFC_MBOXQ_t *pmboxq; + struct lpfc_mbx_set_link_diag_state *link_diag_state; + uint32_t req_len, alloc_len; + int mbxstatus = MBX_SUCCESS, rc; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) + return -ENOMEM; + + req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto link_diag_state_set_out; + } + link_diag_state = &pmboxq->u.mqe.un.link_diag_state; + bf_set(lpfc_mbx_set_diag_state_link_num, &link_diag_state->u.req, + phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_set_diag_state_link_type, &link_diag_state->u.req, + phba->sli4_hba.link_state.type); + if (diag) + bf_set(lpfc_mbx_set_diag_state_diag, + &link_diag_state->u.req, 1); + else + bf_set(lpfc_mbx_set_diag_state_diag, + &link_diag_state->u.req, 0); + + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); + + if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0)) + rc = 0; + else + rc = -ENODEV; + +link_diag_state_set_out: + if (pmboxq && (mbxstatus != MBX_TIMEOUT)) + mempool_free(pmboxq, phba->mbox_mem_pool); + + return rc; +} + +/** + * lpfc_sli4_bsg_diag_loopback_mode - process an sli4 bsg vendor command + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for placing an sli4 port into diagnostic + * loopback mode in order to perform a diagnostic loopback test. + */ +static int +lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) +{ + struct diag_mode_set *loopback_mode; + uint32_t link_flags, timeout, req_len, alloc_len; + struct lpfc_mbx_set_link_diag_loopback *link_diag_loopback; + LPFC_MBOXQ_t *pmboxq = NULL; + int mbxstatus, i, rc = 0; + + /* no data to return just the return code */ + job->reply->reply_payload_rcv_len = 0; + + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3011 Received DIAG MODE request size:%d " + "below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set))); + rc = -EINVAL; + goto job_error; + } + + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + /* bring the link to diagnostic mode */ + loopback_mode = (struct diag_mode_set *) + job->request->rqst_data.h_vendor.vendor_cmd; + link_flags = loopback_mode->type; + timeout = loopback_mode->timeout * 100; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); + if (rc) + goto loopback_mode_exit; + + /* wait for link down before proceeding */ + i = 0; + while (phba->link_state != LPFC_LINK_DOWN) { + if (i++ > timeout) { + rc = -ETIMEDOUT; + goto loopback_mode_exit; + } + msleep(10); + } + /* set up loopback mode */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto loopback_mode_exit; + } + req_len = (sizeof(struct lpfc_mbx_set_link_diag_loopback) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto loopback_mode_exit; + } + link_diag_loopback = &pmboxq->u.mqe.un.link_diag_loopback; + bf_set(lpfc_mbx_set_diag_state_link_num, + &link_diag_loopback->u.req, phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_set_diag_state_link_type, + &link_diag_loopback->u.req, phba->sli4_hba.link_state.type); + if (link_flags == INTERNAL_LOOP_BACK) + bf_set(lpfc_mbx_set_diag_lpbk_type, + &link_diag_loopback->u.req, + LPFC_DIAG_LOOPBACK_TYPE_INTERNAL); + else + bf_set(lpfc_mbx_set_diag_lpbk_type, + &link_diag_loopback->u.req, + LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL); + + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); + if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) + rc = -ENODEV; + else { + phba->link_flag |= LS_LOOPBACK_MODE; + /* wait for the link attention interrupt */ + msleep(100); + i = 0; + while (phba->link_state != LPFC_HBA_READY) { + if (i++ > timeout) { + rc = -ETIMEDOUT; + break; + } + msleep(10); } - lpfc_destroy_vport_work_array(phba, vports); - } else { - shost = lpfc_shost_from_vport(phba->pport); - scsi_unblock_requests(shost); } +loopback_mode_exit: + lpfc_bsg_diag_mode_exit(phba); + /* * Let SLI layer release mboxq if mbox command completed after timeout. */ - if (mbxstatus != MBX_TIMEOUT) + if (pmboxq && (mbxstatus != MBX_TIMEOUT)) mempool_free(pmboxq, phba->mbox_mem_pool); job_error: @@ -1622,6 +1846,234 @@ job_error: } /** + * lpfc_bsg_diag_loopback_mode - bsg vendor command for diag loopback mode + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for responding to check and dispatch bsg diag + * command from the user to proper driver action routines. + */ +static int +lpfc_bsg_diag_loopback_mode(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + int rc; + + shost = job->shost; + if (!shost) + return -ENODEV; + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) + return -ENODEV; + phba = vport->phba; + if (!phba) + return -ENODEV; + + if (phba->sli_rev < LPFC_SLI_REV4) + rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job); + else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == + LPFC_SLI_INTF_IF_TYPE_2) + rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job); + else + rc = -ENODEV; + + return rc; + +} + +/** + * lpfc_sli4_bsg_diag_mode_end - sli4 bsg vendor command for ending diag mode + * @job: LPFC_BSG_VENDOR_DIAG_MODE_END + * + * This function is responsible for responding to check and dispatch bsg diag + * command from the user to proper driver action routines. + */ +static int +lpfc_sli4_bsg_diag_mode_end(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + int rc; + + shost = job->shost; + if (!shost) + return -ENODEV; + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) + return -ENODEV; + phba = vport->phba; + if (!phba) + return -ENODEV; + + if (phba->sli_rev < LPFC_SLI_REV4) + return -ENODEV; + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + return -ENODEV; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); + + if (!rc) + rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT); + + return rc; +} + +/** + * lpfc_sli4_bsg_link_diag_test - sli4 bsg vendor command for diag link test + * @job: LPFC_BSG_VENDOR_DIAG_LINK_TEST + * + * This function is to perform SLI4 diag link test request from the user + * applicaiton. + */ +static int +lpfc_sli4_bsg_link_diag_test(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + LPFC_MBOXQ_t *pmboxq; + struct sli4_link_diag *link_diag_test_cmd; + uint32_t req_len, alloc_len; + uint32_t timeout; + struct lpfc_mbx_run_link_diag_test *run_link_diag_test; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + struct diag_status *diag_status_reply; + int mbxstatus, rc = 0; + + shost = job->shost; + if (!shost) { + rc = -ENODEV; + goto job_error; + } + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) { + rc = -ENODEV; + goto job_error; + } + phba = vport->phba; + if (!phba) { + rc = -ENODEV; + goto job_error; + } + + if (phba->sli_rev < LPFC_SLI_REV4) { + rc = -ENODEV; + goto job_error; + } + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) { + rc = -ENODEV; + goto job_error; + } + + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct sli4_link_diag)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3013 Received LINK DIAG TEST request " + " size:%d below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct sli4_link_diag))); + rc = -EINVAL; + goto job_error; + } + + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + link_diag_test_cmd = (struct sli4_link_diag *) + job->request->rqst_data.h_vendor.vendor_cmd; + timeout = link_diag_test_cmd->timeout * 100; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); + + if (rc) + goto job_error; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto link_diag_test_exit; + } + + req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto link_diag_test_exit; + } + run_link_diag_test = &pmboxq->u.mqe.un.link_diag_test; + bf_set(lpfc_mbx_run_diag_test_link_num, &run_link_diag_test->u.req, + phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_run_diag_test_link_type, &run_link_diag_test->u.req, + phba->sli4_hba.link_state.type); + bf_set(lpfc_mbx_run_diag_test_test_id, &run_link_diag_test->u.req, + link_diag_test_cmd->test_id); + bf_set(lpfc_mbx_run_diag_test_loops, &run_link_diag_test->u.req, + link_diag_test_cmd->loops); + bf_set(lpfc_mbx_run_diag_test_test_ver, &run_link_diag_test->u.req, + link_diag_test_cmd->test_version); + bf_set(lpfc_mbx_run_diag_test_err_act, &run_link_diag_test->u.req, + link_diag_test_cmd->error_action); + + mbxstatus = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + + shdr = (union lpfc_sli4_cfg_shdr *) + &pmboxq->u.mqe.un.sli4_config.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status || mbxstatus) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "3010 Run link diag test mailbox failed with " + "mbx_status x%x status x%x, add_status x%x\n", + mbxstatus, shdr_status, shdr_add_status); + } + + diag_status_reply = (struct diag_status *) + job->reply->reply_data.vendor_reply.vendor_rsp; + + if (job->reply_len < + sizeof(struct fc_bsg_request) + sizeof(struct diag_status)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3012 Received Run link diag test reply " + "below minimum size (%d): reply_len:%d\n", + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_status)), + job->reply_len); + rc = -EINVAL; + goto job_error; + } + + diag_status_reply->mbox_status = mbxstatus; + diag_status_reply->shdr_status = shdr_status; + diag_status_reply->shdr_add_status = shdr_add_status; + +link_diag_test_exit: + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); + + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + + lpfc_bsg_diag_mode_exit(phba); + +job_error: + /* make error code available to userspace */ + job->reply->result = rc; + /* complete the job back to userspace if no error */ + if (rc == 0) + job->job_done(job); + return rc; +} + +/** * lpfcdiag_loop_self_reg - obtains a remote port login id * @phba: Pointer to HBA context object * @rpi: Pointer to a remote port login id @@ -1851,6 +2303,86 @@ err_get_xri_exit: } /** + * lpfc_bsg_dma_page_alloc - allocate a bsg mbox page sized dma buffers + * @phba: Pointer to HBA context object + * + * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and. + * retruns the pointer to the buffer. + **/ +static struct lpfc_dmabuf * +lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) +{ + struct lpfc_dmabuf *dmabuf; + struct pci_dev *pcidev = phba->pcidev; + + /* allocate dma buffer struct */ + dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!dmabuf) + return NULL; + + INIT_LIST_HEAD(&dmabuf->list); + + /* now, allocate dma buffer */ + dmabuf->virt = dma_alloc_coherent(&pcidev->dev, BSG_MBOX_SIZE, + &(dmabuf->phys), GFP_KERNEL); + + if (!dmabuf->virt) { + kfree(dmabuf); + return NULL; + } + memset((uint8_t *)dmabuf->virt, 0, BSG_MBOX_SIZE); + + return dmabuf; +} + +/** + * lpfc_bsg_dma_page_free - free a bsg mbox page sized dma buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to the bsg mbox page sized dma buffer descriptor. + * + * This routine just simply frees a dma buffer and its associated buffer + * descriptor referred by @dmabuf. + **/ +static void +lpfc_bsg_dma_page_free(struct lpfc_hba *phba, struct lpfc_dmabuf *dmabuf) +{ + struct pci_dev *pcidev = phba->pcidev; + + if (!dmabuf) + return; + + if (dmabuf->virt) + dma_free_coherent(&pcidev->dev, BSG_MBOX_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + return; +} + +/** + * lpfc_bsg_dma_page_list_free - free a list of bsg mbox page sized dma buffers + * @phba: Pointer to HBA context object. + * @dmabuf_list: Pointer to a list of bsg mbox page sized dma buffer descs. + * + * This routine just simply frees all dma buffers and their associated buffer + * descriptors referred by @dmabuf_list. + **/ +static void +lpfc_bsg_dma_page_list_free(struct lpfc_hba *phba, + struct list_head *dmabuf_list) +{ + struct lpfc_dmabuf *dmabuf, *next_dmabuf; + + if (list_empty(dmabuf_list)) + return; + + list_for_each_entry_safe(dmabuf, next_dmabuf, dmabuf_list, list) { + list_del_init(&dmabuf->list); + lpfc_bsg_dma_page_free(phba, dmabuf); + } + return; +} + +/** * diag_cmd_data_alloc - fills in a bde struct with dma buffers * @phba: Pointer to HBA context object * @bpl: Pointer to 64 bit bde structure @@ -2067,7 +2599,7 @@ err_post_rxbufs_exit: } /** - * lpfc_bsg_diag_test - with a port in loopback issues a Ct cmd to itself + * lpfc_bsg_diag_loopback_run - run loopback on a port by issue ct cmd to itself * @job: LPFC_BSG_VENDOR_DIAG_TEST fc_bsg_job * * This function receives a user data buffer to be transmitted and received on @@ -2086,7 +2618,7 @@ err_post_rxbufs_exit: * of loopback mode. **/ static int -lpfc_bsg_diag_test(struct fc_bsg_job *job) +lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job) { struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; struct lpfc_hba *phba = vport->phba; @@ -2411,7 +2943,7 @@ job_error: } /** - * lpfc_bsg_wake_mbox_wait - lpfc_bsg_issue_mbox mbox completion handler + * lpfc_bsg_issue_mbox_cmpl - lpfc_bsg_issue_mbox mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -2422,15 +2954,13 @@ job_error: * of the mailbox. **/ void -lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +lpfc_bsg_issue_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { struct bsg_job_data *dd_data; struct fc_bsg_job *job; - struct lpfc_mbx_nembed_cmd *nembed_sge; uint32_t size; unsigned long flags; - uint8_t *to; - uint8_t *from; + uint8_t *pmb, *pmb_buf; spin_lock_irqsave(&phba->ct_ev_lock, flags); dd_data = pmboxq->context1; @@ -2440,62 +2970,21 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) return; } - /* build the outgoing buffer to do an sg copy - * the format is the response mailbox followed by any extended - * mailbox data + /* + * The outgoing buffer is readily referred from the dma buffer, + * just need to get header part from mailboxq structure. */ - from = (uint8_t *)&pmboxq->u.mb; - to = (uint8_t *)dd_data->context_un.mbox.mb; - memcpy(to, from, sizeof(MAILBOX_t)); - if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) { - /* copy the extended data if any, count is in words */ - if (dd_data->context_un.mbox.outExtWLen) { - from = (uint8_t *)dd_data->context_un.mbox.ext; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.outExtWLen * - sizeof(uint32_t); - memcpy(to, from, size); - } else if (pmboxq->u.mb.mbxCommand == MBX_RUN_BIU_DIAG64) { - from = (uint8_t *)dd_data->context_un.mbox. - dmp->dma.virt; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.dmp->size; - memcpy(to, from, size); - } else if ((phba->sli_rev == LPFC_SLI_REV4) && - (pmboxq->u.mb.mbxCommand == MBX_DUMP_MEMORY)) { - from = (uint8_t *)dd_data->context_un.mbox.dmp->dma. - virt; - to += sizeof(MAILBOX_t); - size = pmboxq->u.mb.un.varWords[5]; - memcpy(to, from, size); - } else if ((phba->sli_rev == LPFC_SLI_REV4) && - (pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) { - nembed_sge = (struct lpfc_mbx_nembed_cmd *) - &pmboxq->u.mb.un.varWords[0]; - - from = (uint8_t *)dd_data->context_un.mbox.dmp->dma. - virt; - to += sizeof(MAILBOX_t); - size = nembed_sge->sge[0].length; - memcpy(to, from, size); - } else if (pmboxq->u.mb.mbxCommand == MBX_READ_EVENT_LOG) { - from = (uint8_t *)dd_data->context_un. - mbox.dmp->dma.virt; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.dmp->size; - memcpy(to, from, size); - } - } + pmb = (uint8_t *)&pmboxq->u.mb; + pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; + memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); - from = (uint8_t *)dd_data->context_un.mbox.mb; job = dd_data->context_un.mbox.set_job; if (job) { size = job->reply_payload.payload_len; job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, - job->reply_payload.sg_cnt, - from, size); - job->reply->result = 0; + job->reply_payload.sg_cnt, + pmb_buf, size); /* need to hold the lock until we set job->dd_data to NULL * to hold off the timeout handler returning to the mid-layer * while we are still processing the job. @@ -2503,28 +2992,19 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) job->dd_data = NULL; dd_data->context_un.mbox.set_job = NULL; spin_unlock_irqrestore(&phba->ct_ev_lock, flags); - job->job_done(job); } else { dd_data->context_un.mbox.set_job = NULL; spin_unlock_irqrestore(&phba->ct_ev_lock, flags); } - kfree(dd_data->context_un.mbox.mb); mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool); - kfree(dd_data->context_un.mbox.ext); - if (dd_data->context_un.mbox.dmp) { - dma_free_coherent(&phba->pcidev->dev, - dd_data->context_un.mbox.dmp->size, - dd_data->context_un.mbox.dmp->dma.virt, - dd_data->context_un.mbox.dmp->dma.phys); - kfree(dd_data->context_un.mbox.dmp); - } - if (dd_data->context_un.mbox.rxbmp) { - lpfc_mbuf_free(phba, dd_data->context_un.mbox.rxbmp->virt, - dd_data->context_un.mbox.rxbmp->phys); - kfree(dd_data->context_un.mbox.rxbmp); - } + lpfc_bsg_dma_page_free(phba, dd_data->context_un.mbox.dmabuffers); kfree(dd_data); + + if (job) { + job->reply->result = 0; + job->job_done(job); + } return; } @@ -2619,6 +3099,1006 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, } /** + * lpfc_bsg_mbox_ext_cleanup - clean up context of multi-buffer mbox session + * @phba: Pointer to HBA context object. + * + * This is routine clean up and reset BSG handling of multi-buffer mbox + * command session. + **/ +static void +lpfc_bsg_mbox_ext_session_reset(struct lpfc_hba *phba) +{ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) + return; + + /* free all memory, including dma buffers */ + lpfc_bsg_dma_page_list_free(phba, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + lpfc_bsg_dma_page_free(phba, phba->mbox_ext_buf_ctx.mbx_dmabuf); + /* multi-buffer write mailbox command pass-through complete */ + memset((char *)&phba->mbox_ext_buf_ctx, 0, + sizeof(struct lpfc_mbox_ext_buf_ctx)); + INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); + + return; +} + +/** + * lpfc_bsg_issue_mbox_ext_handle_job - job handler for multi-buffer mbox cmpl + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is routine handles BSG job for mailbox commands completions with + * multiple external buffers. + **/ +static struct fc_bsg_job * +lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct bsg_job_data *dd_data; + struct fc_bsg_job *job; + uint8_t *pmb, *pmb_buf; + unsigned long flags; + uint32_t size; + int rc = 0; + + spin_lock_irqsave(&phba->ct_ev_lock, flags); + dd_data = pmboxq->context1; + /* has the job already timed out? */ + if (!dd_data) { + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + job = NULL; + goto job_done_out; + } + + /* + * The outgoing buffer is readily referred from the dma buffer, + * just need to get header part from mailboxq structure. + */ + pmb = (uint8_t *)&pmboxq->u.mb; + pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; + memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); + + job = dd_data->context_un.mbox.set_job; + if (job) { + size = job->reply_payload.payload_len; + job->reply->reply_payload_rcv_len = + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, + pmb_buf, size); + /* result for successful */ + job->reply->result = 0; + job->dd_data = NULL; + /* need to hold the lock util we set job->dd_data to NULL + * to hold off the timeout handler from midlayer to take + * any action. + */ + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2937 SLI_CONFIG ext-buffer maibox command " + "(x%x/x%x) complete bsg job done, bsize:%d\n", + phba->mbox_ext_buf_ctx.nembType, + phba->mbox_ext_buf_ctx.mboxType, size); + } else + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + +job_done_out: + if (!job) + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2938 SLI_CONFIG ext-buffer maibox " + "command (x%x/x%x) failure, rc:x%x\n", + phba->mbox_ext_buf_ctx.nembType, + phba->mbox_ext_buf_ctx.mboxType, rc); + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_DONE; + kfree(dd_data); + + return job; +} + +/** + * lpfc_bsg_issue_read_mbox_ext_cmpl - compl handler for multi-buffer read mbox + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox read commands with multiple + * external buffers. + **/ +static void +lpfc_bsg_issue_read_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct fc_bsg_job *job; + + /* handle the BSG job with mailbox command */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS) + pmboxq->u.mb.mbxStatus = MBXERR_ERROR; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2939 SLI_CONFIG ext-buffer rd maibox command " + "complete, ctxState:x%x, mbxStatus:x%x\n", + phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); + + job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); + + if (pmboxq->u.mb.mbxStatus || phba->mbox_ext_buf_ctx.numBuf == 1) + lpfc_bsg_mbox_ext_session_reset(phba); + + /* free base driver mailbox structure memory */ + mempool_free(pmboxq, phba->mbox_mem_pool); + + /* complete the bsg job if we have it */ + if (job) + job->job_done(job); + + return; +} + +/** + * lpfc_bsg_issue_write_mbox_ext_cmpl - cmpl handler for multi-buffer write mbox + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox write commands with multiple + * external buffers. + **/ +static void +lpfc_bsg_issue_write_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct fc_bsg_job *job; + + /* handle the BSG job with the mailbox command */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS) + pmboxq->u.mb.mbxStatus = MBXERR_ERROR; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2940 SLI_CONFIG ext-buffer wr maibox command " + "complete, ctxState:x%x, mbxStatus:x%x\n", + phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); + + job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); + + /* free all memory, including dma buffers */ + mempool_free(pmboxq, phba->mbox_mem_pool); + lpfc_bsg_mbox_ext_session_reset(phba); + + /* complete the bsg job if we have it */ + if (job) + job->job_done(job); + + return; +} + +static void +lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp, + uint32_t index, struct lpfc_dmabuf *mbx_dmabuf, + struct lpfc_dmabuf *ext_dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)mbx_dmabuf->virt; + + if (nemb_tp == nemb_mse) { + if (index == 0) { + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi = + putPaddrHigh(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo = + putPaddrLow(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2943 SLI_CONFIG(mse)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].buf_len, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo); + } else { + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi = + putPaddrHigh(ext_dmabuf->phys); + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo = + putPaddrLow(ext_dmabuf->phys); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2944 SLI_CONFIG(mse)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].buf_len, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo); + } + } else { + if (index == 0) { + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi = + putPaddrHigh(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo = + putPaddrLow(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3007 SLI_CONFIG(hbd)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un. + sli_config_emb1_subsys.hbd[index]), + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo); + + } else { + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi = + putPaddrHigh(ext_dmabuf->phys); + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo = + putPaddrLow(ext_dmabuf->phys); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3008 SLI_CONFIG(hbd)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un. + sli_config_emb1_subsys.hbd[index]), + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo); + } + } + return; +} + +/** + * lpfc_bsg_sli_cfg_mse_read_cmd_ext - sli_config non-embedded mailbox cmd read + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @nemb_tp: Enumerate of non-embedded mailbox command type. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine performs SLI_CONFIG (0x9B) read mailbox command operation with + * non-embedded external bufffers. + **/ +static int +lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + enum nemb_type nemb_tp, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct dfc_mbox_req *mbox_req; + struct lpfc_dmabuf *curr_dmabuf, *next_dmabuf; + uint32_t ext_buf_cnt, ext_buf_index; + struct lpfc_dmabuf *ext_dmabuf = NULL; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + uint8_t *pmbx; + int rc, i; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (nemb_tp == nemb_mse) { + ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2945 Handled SLI_CONFIG(mse) rd, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_MSE); + rc = -ERANGE; + goto job_error; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2941 Handled SLI_CONFIG(mse) rd, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } else { + /* sanity check on interface type for support */ + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) { + rc = -ENODEV; + goto job_error; + } + /* nemb_tp == nemb_hbd */ + ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2946 Handled SLI_CONFIG(hbd) rd, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_HBD); + rc = -ERANGE; + goto job_error; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2942 Handled SLI_CONFIG(hbd) rd, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } + + /* reject non-embedded mailbox command with none external buffer */ + if (ext_buf_cnt == 0) { + rc = -EPERM; + goto job_error; + } else if (ext_buf_cnt > 1) { + /* additional external read buffers */ + for (i = 1; i < ext_buf_cnt; i++) { + ext_dmabuf = lpfc_bsg_dma_page_alloc(phba); + if (!ext_dmabuf) { + rc = -ENOMEM; + goto job_error; + } + list_add_tail(&ext_dmabuf->list, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + } + } + + /* bsg tracking structure */ + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + + /* for the first external buffer */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); + + /* for the rest of external buffer descriptors if any */ + if (ext_buf_cnt > 1) { + ext_buf_index = 1; + list_for_each_entry_safe(curr_dmabuf, next_dmabuf, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list, list) { + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, + ext_buf_index, dmabuf, + curr_dmabuf); + ext_buf_index++; + } + } + + /* construct base driver mbox command */ + pmb = &pmboxq->u.mb; + pmbx = (uint8_t *)dmabuf->virt; + memcpy(pmb, pmbx, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* multi-buffer handling context */ + phba->mbox_ext_buf_ctx.nembType = nemb_tp; + phba->mbox_ext_buf_ctx.mboxType = mbox_rd; + phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; + phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; + phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; + phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; + + /* callback for multi-buffer read mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_read_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2947 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2948 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + +job_error: + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + lpfc_bsg_dma_page_list_free(phba, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + kfree(dd_data); + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE; + return rc; +} + +/** + * lpfc_bsg_sli_cfg_write_cmd_ext - sli_config non-embedded mailbox cmd write + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine performs SLI_CONFIG (0x9B) write mailbox command operation with + * non-embedded external bufffers. + **/ +static int +lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + enum nemb_type nemb_tp, + struct lpfc_dmabuf *dmabuf) +{ + struct dfc_mbox_req *mbox_req; + struct lpfc_sli_config_mbox *sli_cfg_mbx; + uint32_t ext_buf_cnt; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + uint8_t *mbx; + int rc = 0, i; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (nemb_tp == nemb_mse) { + ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2953 Handled SLI_CONFIG(mse) wr, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_MSE); + return -ERANGE; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2949 Handled SLI_CONFIG(mse) wr, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } else { + /* sanity check on interface type for support */ + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + return -ENODEV; + /* nemb_tp == nemb_hbd */ + ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2954 Handled SLI_CONFIG(hbd) wr, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_HBD); + return -ERANGE; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2950 Handled SLI_CONFIG(hbd) wr, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } + + if (ext_buf_cnt == 0) + return -EPERM; + + /* for the first external buffer */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); + + /* log for looking forward */ + for (i = 1; i < ext_buf_cnt; i++) { + if (nemb_tp == nemb_mse) + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2951 SLI_CONFIG(mse), buf[%d]-length:%d\n", + i, sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[i].buf_len); + else + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2952 SLI_CONFIG(hbd), buf[%d]-length:%d\n", + i, bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[i])); + } + + /* multi-buffer handling context */ + phba->mbox_ext_buf_ctx.nembType = nemb_tp; + phba->mbox_ext_buf_ctx.mboxType = mbox_wr; + phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; + phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; + phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; + phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; + + if (ext_buf_cnt == 1) { + /* bsg tracking structure */ + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pmb = &pmboxq->u.mb; + mbx = (uint8_t *)dmabuf->virt; + memcpy(pmb, mbx, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* callback for multi-buffer read mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)mbx; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2955 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2956 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + } + +job_error: + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + kfree(dd_data); + + return rc; +} + +/** + * lpfc_bsg_handle_sli_cfg_mbox - handle sli-cfg mailbox cmd with ext buffer + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded + * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B + * with embedded sussystem 0x1 and opcodes with external HBDs. + **/ +static int +lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + uint32_t subsys; + uint32_t opcode; + int rc = SLI_CONFIG_NOT_HANDLED; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_HOST; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (!bsg_bf_get(lpfc_mbox_hdr_emb, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) { + subsys = bsg_bf_get(lpfc_emb0_subcmnd_subsys, + &sli_cfg_mbx->un.sli_config_emb0_subsys); + opcode = bsg_bf_get(lpfc_emb0_subcmnd_opcode, + &sli_cfg_mbx->un.sli_config_emb0_subsys); + if (subsys == SLI_CONFIG_SUBSYS_FCOE) { + switch (opcode) { + case FCOE_OPCODE_READ_FCF: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2957 Handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, + nemb_mse, dmabuf); + break; + case FCOE_OPCODE_ADD_FCF: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2958 Handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, + nemb_mse, dmabuf); + break; + default: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2959 Not handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = SLI_CONFIG_NOT_HANDLED; + break; + } + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2977 Handled SLI_CONFIG " + "subsys:x%d, opcode:x%x\n", + subsys, opcode); + rc = SLI_CONFIG_NOT_HANDLED; + } + } else { + subsys = bsg_bf_get(lpfc_emb1_subcmnd_subsys, + &sli_cfg_mbx->un.sli_config_emb1_subsys); + opcode = bsg_bf_get(lpfc_emb1_subcmnd_opcode, + &sli_cfg_mbx->un.sli_config_emb1_subsys); + if (subsys == SLI_CONFIG_SUBSYS_COMN) { + switch (opcode) { + case COMN_OPCODE_READ_OBJECT: + case COMN_OPCODE_READ_OBJECT_LIST: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2960 Handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, + nemb_hbd, dmabuf); + break; + case COMN_OPCODE_WRITE_OBJECT: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2961 Handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, + nemb_hbd, dmabuf); + break; + default: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2962 Not handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = SLI_CONFIG_NOT_HANDLED; + break; + } + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2978 Handled SLI_CONFIG " + "subsys:x%d, opcode:x%x\n", + subsys, opcode); + rc = SLI_CONFIG_NOT_HANDLED; + } + } + return rc; +} + +/** + * lpfc_bsg_mbox_ext_abort_req - request to abort mbox command with ext buffers + * @phba: Pointer to HBA context object. + * + * This routine is for requesting to abort a pass-through mailbox command with + * multiple external buffers due to error condition. + **/ +static void +lpfc_bsg_mbox_ext_abort(struct lpfc_hba *phba) +{ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; + else + lpfc_bsg_mbox_ext_session_reset(phba); + return; +} + +/** + * lpfc_bsg_read_ebuf_get - get the next mailbox read external buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * This routine extracts the next mailbox read external buffer back to + * user space through BSG. + **/ +static int +lpfc_bsg_read_ebuf_get(struct lpfc_hba *phba, struct fc_bsg_job *job) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct lpfc_dmabuf *dmabuf; + uint8_t *pbuf; + uint32_t size; + uint32_t index; + + index = phba->mbox_ext_buf_ctx.seqNum; + phba->mbox_ext_buf_ctx.seqNum++; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *) + phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + + if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { + size = bsg_bf_get(lpfc_mbox_sli_config_mse_len, + &sli_cfg_mbx->un.sli_config_emb0_subsys.mse[index]); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2963 SLI_CONFIG (mse) ext-buffer rd get " + "buffer[%d], size:%d\n", index, size); + } else { + size = bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un.sli_config_emb1_subsys.hbd[index]); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2964 SLI_CONFIG (hbd) ext-buffer rd get " + "buffer[%d], size:%d\n", index, size); + } + if (list_empty(&phba->mbox_ext_buf_ctx.ext_dmabuf_list)) + return -EPIPE; + dmabuf = list_first_entry(&phba->mbox_ext_buf_ctx.ext_dmabuf_list, + struct lpfc_dmabuf, list); + list_del_init(&dmabuf->list); + pbuf = (uint8_t *)dmabuf->virt; + job->reply->reply_payload_rcv_len = + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, + pbuf, size); + + lpfc_bsg_dma_page_free(phba, dmabuf); + + if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2965 SLI_CONFIG (hbd) ext-buffer rd mbox " + "command session done\n"); + lpfc_bsg_mbox_ext_session_reset(phba); + } + + job->reply->result = 0; + job->job_done(job); + + return SLI_CONFIG_HANDLED; +} + +/** + * lpfc_bsg_write_ebuf_set - set the next mailbox write external buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * This routine sets up the next mailbox read external buffer obtained + * from user space through BSG. + **/ +static int +lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + enum nemb_type nemb_tp; + uint8_t *pbuf; + uint32_t size; + uint32_t index; + int rc; + + index = phba->mbox_ext_buf_ctx.seqNum; + phba->mbox_ext_buf_ctx.seqNum++; + nemb_tp = phba->mbox_ext_buf_ctx.nembType; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *) + phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + pbuf = (uint8_t *)dmabuf->virt; + size = job->request_payload.payload_len; + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, + pbuf, size); + + if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2966 SLI_CONFIG (mse) ext-buffer wr set " + "buffer[%d], size:%d\n", + phba->mbox_ext_buf_ctx.seqNum, size); + + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2967 SLI_CONFIG (hbd) ext-buffer wr set " + "buffer[%d], size:%d\n", + phba->mbox_ext_buf_ctx.seqNum, size); + + } + + /* set up external buffer descriptor and add to external buffer list */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, index, + phba->mbox_ext_buf_ctx.mbx_dmabuf, + dmabuf); + list_add_tail(&dmabuf->list, &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + + if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2968 SLI_CONFIG ext-buffer wr all %d " + "ebuffers received\n", + phba->mbox_ext_buf_ctx.numBuf); + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pbuf = (uint8_t *)phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + pmb = &pmboxq->u.mb; + memcpy(pmb, pbuf, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* callback for multi-buffer write mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pbuf; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2969 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2970 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + goto job_error; + } + + /* wait for additoinal external buffers */ + job->reply->result = 0; + job->job_done(job); + return SLI_CONFIG_HANDLED; + +job_error: + lpfc_bsg_dma_page_free(phba, dmabuf); + kfree(dd_data); + + return rc; +} + +/** + * lpfc_bsg_handle_sli_cfg_ebuf - handle ext buffer with sli-cfg mailbox cmd + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine handles the external buffer with SLI_CONFIG (0x9B) mailbox + * command with multiple non-embedded external buffers. + **/ +static int +lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + int rc; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2971 SLI_CONFIG buffer (type:x%x)\n", + phba->mbox_ext_buf_ctx.mboxType); + + if (phba->mbox_ext_buf_ctx.mboxType == mbox_rd) { + if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_DONE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2972 SLI_CONFIG rd buffer state " + "mismatch:x%x\n", + phba->mbox_ext_buf_ctx.state); + lpfc_bsg_mbox_ext_abort(phba); + return -EPIPE; + } + rc = lpfc_bsg_read_ebuf_get(phba, job); + if (rc == SLI_CONFIG_HANDLED) + lpfc_bsg_dma_page_free(phba, dmabuf); + } else { /* phba->mbox_ext_buf_ctx.mboxType == mbox_wr */ + if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_HOST) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2973 SLI_CONFIG wr buffer state " + "mismatch:x%x\n", + phba->mbox_ext_buf_ctx.state); + lpfc_bsg_mbox_ext_abort(phba); + return -EPIPE; + } + rc = lpfc_bsg_write_ebuf_set(phba, job, dmabuf); + } + return rc; +} + +/** + * lpfc_bsg_handle_sli_cfg_ext - handle sli-cfg mailbox with external buffer + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG + * (0x9B) mailbox commands and external buffers. + **/ +static int +lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + struct dfc_mbox_req *mbox_req; + int rc; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* mbox command with/without single external buffer */ + if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0) + return SLI_CONFIG_NOT_HANDLED; + + /* mbox command and first external buffer */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) { + if (mbox_req->extSeqNum == 1) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2974 SLI_CONFIG mailbox: tag:%d, " + "seq:%d\n", mbox_req->extMboxTag, + mbox_req->extSeqNum); + rc = lpfc_bsg_handle_sli_cfg_mbox(phba, job, dmabuf); + return rc; + } else + goto sli_cfg_ext_error; + } + + /* + * handle additional external buffers + */ + + /* check broken pipe conditions */ + if (mbox_req->extMboxTag != phba->mbox_ext_buf_ctx.mbxTag) + goto sli_cfg_ext_error; + if (mbox_req->extSeqNum > phba->mbox_ext_buf_ctx.numBuf) + goto sli_cfg_ext_error; + if (mbox_req->extSeqNum != phba->mbox_ext_buf_ctx.seqNum + 1) + goto sli_cfg_ext_error; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2975 SLI_CONFIG mailbox external buffer: " + "extSta:x%x, tag:%d, seq:%d\n", + phba->mbox_ext_buf_ctx.state, mbox_req->extMboxTag, + mbox_req->extSeqNum); + rc = lpfc_bsg_handle_sli_cfg_ebuf(phba, job, dmabuf); + return rc; + +sli_cfg_ext_error: + /* all other cases, broken pipe */ + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2976 SLI_CONFIG mailbox broken pipe: " + "ctxSta:x%x, ctxNumBuf:%d " + "ctxTag:%d, ctxSeq:%d, tag:%d, seq:%d\n", + phba->mbox_ext_buf_ctx.state, + phba->mbox_ext_buf_ctx.numBuf, + phba->mbox_ext_buf_ctx.mbxTag, + phba->mbox_ext_buf_ctx.seqNum, + mbox_req->extMboxTag, mbox_req->extSeqNum); + + lpfc_bsg_mbox_ext_session_reset(phba); + + return -EPIPE; +} + +/** * lpfc_bsg_issue_mbox - issues a mailbox command on behalf of an app * @phba: Pointer to HBA context object. * @mb: Pointer to a mailbox object. @@ -2638,22 +4118,21 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, LPFC_MBOXQ_t *pmboxq = NULL; /* internal mailbox queue */ MAILBOX_t *pmb; /* shortcut to the pmboxq mailbox */ /* a 4k buffer to hold the mb and extended data from/to the bsg */ - MAILBOX_t *mb = NULL; + uint8_t *pmbx = NULL; struct bsg_job_data *dd_data = NULL; /* bsg data tracking structure */ - uint32_t size; - struct lpfc_dmabuf *rxbmp = NULL; /* for biu diag */ - struct lpfc_dmabufext *dmp = NULL; /* for biu diag */ - struct ulp_bde64 *rxbpl = NULL; - struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *) - job->request->rqst_data.h_vendor.vendor_cmd; + struct lpfc_dmabuf *dmabuf = NULL; + struct dfc_mbox_req *mbox_req; struct READ_EVENT_LOG_VAR *rdEventLog; uint32_t transmit_length, receive_length, mode; + struct lpfc_mbx_sli4_config *sli4_config; struct lpfc_mbx_nembed_cmd *nembed_sge; struct mbox_header *header; struct ulp_bde64 *bde; uint8_t *ext = NULL; int rc = 0; uint8_t *from; + uint32_t size; + /* in case no data is transferred */ job->reply->reply_payload_rcv_len = 0; @@ -2665,6 +4144,18 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } + /* + * Don't allow mailbox commands to be sent when blocked or when in + * the middle of discovery + */ + if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { + rc = -EAGAIN; + goto job_done; + } + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + /* check if requested extended data lengths are valid */ if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) || (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) { @@ -2672,6 +4163,32 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } + dmabuf = lpfc_bsg_dma_page_alloc(phba); + if (!dmabuf || !dmabuf->virt) { + rc = -ENOMEM; + goto job_done; + } + + /* Get the mailbox command or external buffer from BSG */ + pmbx = (uint8_t *)dmabuf->virt; + size = job->request_payload.payload_len; + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, pmbx, size); + + /* Handle possible SLI_CONFIG with non-embedded payloads */ + if (phba->sli_rev == LPFC_SLI_REV4) { + rc = lpfc_bsg_handle_sli_cfg_ext(phba, job, dmabuf); + if (rc == SLI_CONFIG_HANDLED) + goto job_cont; + if (rc) + goto job_done; + /* SLI_CONFIG_NOT_HANDLED for other mailbox commands */ + } + + rc = lpfc_bsg_check_cmd_access(phba, (MAILBOX_t *)pmbx, vport); + if (rc != 0) + goto job_done; /* must be negative */ + /* allocate our bsg tracking structure */ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); if (!dd_data) { @@ -2681,12 +4198,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } - mb = kzalloc(BSG_MBOX_SIZE, GFP_KERNEL); - if (!mb) { - rc = -ENOMEM; - goto job_done; - } - pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) { rc = -ENOMEM; @@ -2694,17 +4205,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); - size = job->request_payload.payload_len; - sg_copy_to_buffer(job->request_payload.sg_list, - job->request_payload.sg_cnt, - mb, size); - - rc = lpfc_bsg_check_cmd_access(phba, mb, vport); - if (rc != 0) - goto job_done; /* must be negative */ - pmb = &pmboxq->u.mb; - memcpy(pmb, mb, sizeof(*pmb)); + memcpy(pmb, pmbx, sizeof(*pmb)); pmb->mbxOwner = OWN_HOST; pmboxq->vport = vport; @@ -2721,30 +4223,13 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, "0x%x while in stopped state.\n", pmb->mbxCommand); - /* Don't allow mailbox commands to be sent when blocked - * or when in the middle of discovery - */ - if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { - rc = -EAGAIN; - goto job_done; - } - /* extended mailbox commands will need an extended buffer */ if (mbox_req->inExtWLen || mbox_req->outExtWLen) { - ext = kzalloc(MAILBOX_EXT_SIZE, GFP_KERNEL); - if (!ext) { - rc = -ENOMEM; - goto job_done; - } - /* any data for the device? */ if (mbox_req->inExtWLen) { - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)ext, from, - mbox_req->inExtWLen * sizeof(uint32_t)); + from = pmbx; + ext = from + sizeof(MAILBOX_t); } - pmboxq->context2 = ext; pmboxq->in_ext_byte_len = mbox_req->inExtWLen * sizeof(uint32_t); @@ -2768,46 +4253,17 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, transmit_length, 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh = - putPaddrHigh(dmp->dma.phys); + putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t)); pmb->un.varBIUdiag.un.s2.xmit_bde64.addrLow = - putPaddrLow(dmp->dma.phys); + putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t)); pmb->un.varBIUdiag.un.s2.rcv_bde64.addrHigh = - putPaddrHigh(dmp->dma.phys + - pmb->un.varBIUdiag.un.s2. - xmit_bde64.tus.f.bdeSize); + putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t) + + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); pmb->un.varBIUdiag.un.s2.rcv_bde64.addrLow = - putPaddrLow(dmp->dma.phys + - pmb->un.varBIUdiag.un.s2. - xmit_bde64.tus.f.bdeSize); - - /* copy the transmit data found in the mailbox extension area */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, transmit_length); + putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t) + + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); } else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) { rdEventLog = &pmb->un.varRdEventLog; receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize; @@ -2823,33 +4279,10 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* mode zero uses a bde like biu diags command */ if (mode == 0) { - - /* rebuild the command for sli4 using our own buffers - * like we do for biu diags - */ - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - if (rxbpl) { - INIT_LIST_HEAD(&rxbmp->list); - dmp = diag_cmd_data_alloc(phba, rxbpl, - receive_length, 0); - } - - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); - pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + pmb->un.varWords[3] = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); + pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); } } else if (phba->sli_rev == LPFC_SLI_REV4) { if (pmb->mbxCommand == MBX_DUMP_MEMORY) { @@ -2860,36 +4293,14 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* receive length cannot be greater than mailbox * extension size */ - if ((receive_length == 0) || - (receive_length > MAILBOX_EXT_SIZE)) { + if (receive_length == 0) { rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length, - 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); - pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + pmb->un.varWords[3] = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); + pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); } else if ((pmb->mbxCommand == MBX_UPDATE_CFG) && pmb->un.varUpdateCfg.co) { bde = (struct ulp_bde64 *)&pmb->un.varWords[4]; @@ -2899,102 +4310,53 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, - bde->tus.f.bdeSize, 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - bde->addrHigh = putPaddrHigh(dmp->dma.phys); - bde->addrLow = putPaddrLow(dmp->dma.phys); - - /* copy the transmit data found in the mailbox - * extension area - */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, - bde->tus.f.bdeSize); + bde->addrHigh = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); + bde->addrLow = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); } else if (pmb->mbxCommand == MBX_SLI4_CONFIG) { - /* rebuild the command for sli4 using our own buffers - * like we do for biu diags - */ - header = (struct mbox_header *)&pmb->un.varWords[0]; - nembed_sge = (struct lpfc_mbx_nembed_cmd *) - &pmb->un.varWords[0]; - receive_length = nembed_sge->sge[0].length; - - /* receive length cannot be greater than mailbox - * extension size - */ - if ((receive_length == 0) || - (receive_length > MAILBOX_EXT_SIZE)) { - rc = -ERANGE; - goto job_done; - } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } + /* Handling non-embedded SLI_CONFIG mailbox command */ + sli4_config = &pmboxq->u.mqe.un.sli4_config; + if (!bf_get(lpfc_mbox_hdr_emb, + &sli4_config->header.cfg_mhdr)) { + /* rebuild the command for sli4 using our + * own buffers like we do for biu diags + */ + header = (struct mbox_header *) + &pmb->un.varWords[0]; + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &pmb->un.varWords[0]; + receive_length = nembed_sge->sge[0].length; + + /* receive length cannot be greater than + * mailbox extension size + */ + if ((receive_length == 0) || + (receive_length > MAILBOX_EXT_SIZE)) { + rc = -ERANGE; + goto job_done; + } - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length, - 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; + nembed_sge->sge[0].pa_hi = + putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); + nembed_sge->sge[0].pa_lo = + putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); } - - INIT_LIST_HEAD(&dmp->dma.list); - nembed_sge->sge[0].pa_hi = putPaddrHigh(dmp->dma.phys); - nembed_sge->sge[0].pa_lo = putPaddrLow(dmp->dma.phys); - /* copy the transmit data found in the mailbox - * extension area - */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, - header->cfg_mhdr.payload_length); } } - dd_data->context_un.mbox.rxbmp = rxbmp; - dd_data->context_un.mbox.dmp = dmp; + dd_data->context_un.mbox.dmabuffers = dmabuf; /* setup wake call as IOCB callback */ - pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait; + pmboxq->mbox_cmpl = lpfc_bsg_issue_mbox_cmpl; /* setup context field to pass wait_queue pointer to wake function */ pmboxq->context1 = dd_data; dd_data->type = TYPE_MBOX; dd_data->context_un.mbox.pmboxq = pmboxq; - dd_data->context_un.mbox.mb = mb; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; dd_data->context_un.mbox.set_job = job; dd_data->context_un.mbox.ext = ext; dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset; @@ -3011,11 +4373,11 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } /* job finished, copy the data */ - memcpy(mb, pmb, sizeof(*pmb)); + memcpy(pmbx, pmb, sizeof(*pmb)); job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, - job->reply_payload.sg_cnt, - mb, size); + job->reply_payload.sg_cnt, + pmbx, size); /* not waiting mbox already done */ rc = 0; goto job_done; @@ -3027,22 +4389,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, job_done: /* common exit for error or job completed inline */ - kfree(mb); if (pmboxq) mempool_free(pmboxq, phba->mbox_mem_pool); - kfree(ext); - if (dmp) { - dma_free_coherent(&phba->pcidev->dev, - dmp->size, dmp->dma.virt, - dmp->dma.phys); - kfree(dmp); - } - if (rxbmp) { - lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys); - kfree(rxbmp); - } + lpfc_bsg_dma_page_free(phba, dmabuf); kfree(dd_data); +job_cont: return rc; } @@ -3055,37 +4407,28 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job) { struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; struct lpfc_hba *phba = vport->phba; + struct dfc_mbox_req *mbox_req; int rc = 0; - /* in case no data is transferred */ + /* mix-and-match backward compatibility */ job->reply->reply_payload_rcv_len = 0; if (job->request_len < sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) { - lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2737 Received MBOX_REQ request below " - "minimum size\n"); - rc = -EINVAL; - goto job_error; - } - - if (job->request_payload.payload_len != BSG_MBOX_SIZE) { - rc = -EINVAL; - goto job_error; - } - - if (job->reply_payload.payload_len != BSG_MBOX_SIZE) { - rc = -EINVAL; - goto job_error; - } - - if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { - rc = -EAGAIN; - goto job_error; + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2737 Mix-and-match backward compability " + "between MBOX_REQ old size:%d and " + "new request size:%d\n", + (int)(job->request_len - + sizeof(struct fc_bsg_request)), + (int)sizeof(struct dfc_mbox_req)); + mbox_req = (struct dfc_mbox_req *) + job->request->rqst_data.h_vendor.vendor_cmd; + mbox_req->extMboxTag = 0; + mbox_req->extSeqNum = 0; } rc = lpfc_bsg_issue_mbox(phba, job, vport); -job_error: if (rc == 0) { /* job done */ job->reply->result = 0; @@ -3416,10 +4759,16 @@ lpfc_bsg_hst_vendor(struct fc_bsg_job *job) rc = lpfc_bsg_send_mgmt_rsp(job); break; case LPFC_BSG_VENDOR_DIAG_MODE: - rc = lpfc_bsg_diag_mode(job); + rc = lpfc_bsg_diag_loopback_mode(job); + break; + case LPFC_BSG_VENDOR_DIAG_MODE_END: + rc = lpfc_sli4_bsg_diag_mode_end(job); + break; + case LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK: + rc = lpfc_bsg_diag_loopback_run(job); break; - case LPFC_BSG_VENDOR_DIAG_TEST: - rc = lpfc_bsg_diag_test(job); + case LPFC_BSG_VENDOR_LINK_DIAG_TEST: + rc = lpfc_sli4_bsg_link_diag_test(job); break; case LPFC_BSG_VENDOR_GET_MGMT_REV: rc = lpfc_bsg_get_dfc_rev(job); @@ -3538,6 +4887,8 @@ lpfc_bsg_timeout(struct fc_bsg_job *job) /* the mbox completion handler can now be run */ spin_unlock_irqrestore(&phba->ct_ev_lock, flags); job->job_done(job); + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; break; case TYPE_MENLO: menlo = &dd_data->context_un.menlo; diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index b542aca6f5ae..c8c2b47ea886 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -24,15 +24,17 @@ * These are the vendor unique structures passed in using the bsg * FC_BSG_HST_VENDOR message code type. */ -#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 -#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 -#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 -#define LPFC_BSG_VENDOR_DIAG_MODE 4 -#define LPFC_BSG_VENDOR_DIAG_TEST 5 -#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 -#define LPFC_BSG_VENDOR_MBOX 7 -#define LPFC_BSG_VENDOR_MENLO_CMD 8 -#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 +#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 +#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 +#define LPFC_BSG_VENDOR_DIAG_MODE 4 +#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 +#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 +#define LPFC_BSG_VENDOR_MBOX 7 +#define LPFC_BSG_VENDOR_MENLO_CMD 8 +#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_DIAG_MODE_END 10 +#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 struct set_ct_event { uint32_t command; @@ -67,10 +69,25 @@ struct diag_mode_set { uint32_t timeout; }; +struct sli4_link_diag { + uint32_t command; + uint32_t timeout; + uint32_t test_id; + uint32_t loops; + uint32_t test_version; + uint32_t error_action; +}; + struct diag_mode_test { uint32_t command; }; +struct diag_status { + uint32_t mbox_status; + uint32_t shdr_status; + uint32_t shdr_add_status; +}; + #define LPFC_WWNN_TYPE 0 #define LPFC_WWPN_TYPE 1 @@ -92,11 +109,15 @@ struct get_mgmt_rev_reply { }; #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ + +/* BSG mailbox request header */ struct dfc_mbox_req { uint32_t command; uint32_t mbOffset; uint32_t inExtWLen; uint32_t outExtWLen; + uint32_t extMboxTag; + uint32_t extSeqNum; }; /* Used for menlo command or menlo data. The xri is only used for menlo data */ @@ -171,7 +192,7 @@ struct lpfc_sli_config_mse { #define lpfc_mbox_sli_config_mse_len_WORD buf_len }; -struct lpfc_sli_config_subcmd_hbd { +struct lpfc_sli_config_hbd { uint32_t buf_len; #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff @@ -194,21 +215,39 @@ struct lpfc_sli_config_hdr { uint32_t reserved5; }; -struct lpfc_sli_config_generic { +struct lpfc_sli_config_emb0_subsys { struct lpfc_sli_config_hdr sli_config_hdr; #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; + uint32_t padding; + uint32_t word64; +#define lpfc_emb0_subcmnd_opcode_SHIFT 0 +#define lpfc_emb0_subcmnd_opcode_MASK 0xff +#define lpfc_emb0_subcmnd_opcode_WORD word64 +#define lpfc_emb0_subcmnd_subsys_SHIFT 8 +#define lpfc_emb0_subcmnd_subsys_MASK 0xff +#define lpfc_emb0_subcmnd_subsys_WORD word64 +/* Subsystem FCOE (0x0C) OpCodes */ +#define SLI_CONFIG_SUBSYS_FCOE 0x0C +#define FCOE_OPCODE_READ_FCF 0x08 +#define FCOE_OPCODE_ADD_FCF 0x09 }; -struct lpfc_sli_config_subcmnd { +struct lpfc_sli_config_emb1_subsys { struct lpfc_sli_config_hdr sli_config_hdr; uint32_t word6; -#define lpfc_subcmnd_opcode_SHIFT 0 -#define lpfc_subcmnd_opcode_MASK 0xff -#define lpfc_subcmnd_opcode_WORD word6 -#define lpfc_subcmnd_subsys_SHIFT 8 -#define lpfc_subcmnd_subsys_MASK 0xff -#define lpfc_subcmnd_subsys_WORD word6 +#define lpfc_emb1_subcmnd_opcode_SHIFT 0 +#define lpfc_emb1_subcmnd_opcode_MASK 0xff +#define lpfc_emb1_subcmnd_opcode_WORD word6 +#define lpfc_emb1_subcmnd_subsys_SHIFT 8 +#define lpfc_emb1_subcmnd_subsys_MASK 0xff +#define lpfc_emb1_subcmnd_subsys_WORD word6 +/* Subsystem COMN (0x01) OpCodes */ +#define SLI_CONFIG_SUBSYS_COMN 0x01 +#define COMN_OPCODE_READ_OBJECT 0xAB +#define COMN_OPCODE_WRITE_OBJECT 0xAC +#define COMN_OPCODE_READ_OBJECT_LIST 0xAD +#define COMN_OPCODE_DELETE_OBJECT 0xAE uint32_t timeout; uint32_t request_length; uint32_t word9; @@ -222,8 +261,8 @@ struct lpfc_sli_config_subcmnd { uint32_t rd_offset; uint32_t obj_name[26]; uint32_t hbd_count; -#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10 - struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; +#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 + struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; }; struct lpfc_sli_config_mbox { @@ -235,7 +274,11 @@ struct lpfc_sli_config_mbox { #define lpfc_mqe_command_MASK 0x000000FF #define lpfc_mqe_command_WORD word0 union { - struct lpfc_sli_config_generic sli_config_generic; - struct lpfc_sli_config_subcmnd sli_config_subcmnd; + struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; + struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; } un; }; + +/* driver only */ +#define SLI_CONFIG_NOT_HANDLED 0 +#define SLI_CONFIG_HANDLED 1 diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index f0b332f4eedb..fc20c247f36b 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -55,6 +55,8 @@ void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *); void lpfc_supported_pages(struct lpfcMboxq *); void lpfc_pc_sli4_params(struct lpfcMboxq *); int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *); +int lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *, struct lpfcMboxq *, + uint16_t, uint16_t, bool); int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *); struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t); void lpfc_cleanup_rcv_buffers(struct lpfc_vport *); @@ -171,6 +173,7 @@ void lpfc_delayed_disc_tmo(unsigned long); void lpfc_delayed_disc_timeout_handler(struct lpfc_vport *); int lpfc_config_port_prep(struct lpfc_hba *); +void lpfc_update_vport_wwn(struct lpfc_vport *vport); int lpfc_config_port_post(struct lpfc_hba *); int lpfc_hba_down_prep(struct lpfc_hba *); int lpfc_hba_down_post(struct lpfc_hba *); @@ -365,6 +368,10 @@ extern void lpfc_debugfs_slow_ring_trc(struct lpfc_hba *, char *, uint32_t, uint32_t, uint32_t); extern struct lpfc_hbq_init *lpfc_hbq_defs[]; +/* SLI4 if_type 2 externs. */ +int lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *); +int lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *); + /* externs BlockGuard */ extern char *_dump_buf_data; extern unsigned long _dump_buf_data_order; @@ -429,3 +436,6 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *); void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *); struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t, uint32_t); +int lpfc_wr_object(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t *); +/* functions to support SR-IOV */ +int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int); diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index d9edfd90d7ff..779b88e1469d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -352,6 +352,8 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp, icmd->ulpLe = 1; icmd->ulpClass = CLASS3; icmd->ulpContext = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) { /* For GEN_REQUEST64_CR, use the RPI */ diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index c93fca058603..ffe82d169b40 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1665,7 +1665,8 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, /* Get fast-path complete queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Fast-path FCP CQ information:\n"); - for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { + fcp_qidx = 0; + do { len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Associated EQID[%02d]:\n", phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid); @@ -1678,7 +1679,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size, phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); - } + } while (++fcp_qidx < phba->cfg_fcp_eq_count); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); /* Get mailbox queue information */ @@ -2012,7 +2013,8 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf, goto pass_check; } /* FCP complete queue */ - for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) { + qidx = 0; + do { if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) { /* Sanity check */ rc = lpfc_idiag_que_param_check( @@ -2024,7 +2026,7 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf, phba->sli4_hba.fcp_cq[qidx]; goto pass_check; } - } + } while (++qidx < phba->cfg_fcp_eq_count); goto error_out; break; case LPFC_IDIAG_MQ: diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index e2c452467c8b..32a084534f3e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -250,7 +250,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, icmd->un.elsreq64.myID = vport->fc_myDID; /* For ELS_REQUEST64_CR, use the VPI by default */ - icmd->ulpContext = vport->vpi + phba->vpi_base; + icmd->ulpContext = phba->vpi_ids[vport->vpi]; icmd->ulpCt_h = 0; /* The CT field must be 0=INVALID_RPI for the ECHO cmd */ if (elscmd == ELS_CMD_ECHO) @@ -454,6 +454,7 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport) rc = -ENOMEM; goto fail_free_dmabuf; } + mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { rc = -ENOMEM; @@ -6585,6 +6586,26 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) { struct lpfc_vport *vport; unsigned long flags; + int i; + + /* The physical ports are always vpi 0 - translate is unnecessary. */ + if (vpi > 0) { + /* + * Translate the physical vpi to the logical vpi. The + * vport stores the logical vpi. + */ + for (i = 0; i < phba->max_vpi; i++) { + if (vpi == phba->vpi_ids[i]) + break; + } + + if (i >= phba->max_vpi) { + lpfc_printf_log(phba, KERN_ERR, LOG_ELS, + "2936 Could not find Vport mapped " + "to vpi %d\n", vpi); + return NULL; + } + } spin_lock_irqsave(&phba->hbalock, flags); list_for_each_entry(vport, &phba->port_list, listentry) { @@ -6641,8 +6662,9 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, vport = phba->pport; else vport = lpfc_find_vport_by_vpid(phba, - icmd->unsli3.rcvsli3.vpi - phba->vpi_base); + icmd->unsli3.rcvsli3.vpi); } + /* If there are no BDEs associated * with this IOCB, there is nothing to do. */ @@ -7222,7 +7244,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1; elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ; /* Set the ulpContext to the vpi */ - elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base; + elsiocb->iocb.ulpContext = phba->vpi_ids[vport->vpi]; } else { /* For FDISC, Let FDISC rsp set the NPortID for this VPI */ icmd->ulpCt_h = 1; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 7a35df5e2038..18d0dbfda2bc 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -881,7 +881,7 @@ lpfc_linkdown(struct lpfc_hba *phba) /* Clean up any firmware default rpi's */ mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mb) { - lpfc_unreg_did(phba, 0xffff, 0xffffffff, mb); + lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); mb->vport = vport; mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) @@ -2690,16 +2690,7 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, sizeof (struct serv_parm)); - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof(vport->fc_nodename)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof(vport->fc_portname)); + lpfc_update_vport_wwn(vport); if (vport->port_type == LPFC_PHYSICAL_PORT) { memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); @@ -3430,7 +3421,8 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); @@ -3504,7 +3496,8 @@ out: return; } - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); @@ -3591,7 +3584,6 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) if (ndlp->nlp_type & NLP_FCP_INITIATOR) rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; - if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN) fc_remote_port_rolechg(rport, rport_ids.roles); @@ -4106,11 +4098,16 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) struct lpfc_hba *phba = vport->phba; LPFC_MBOXQ_t *mbox; int rc; + uint16_t rpi; if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox); + /* SLI4 ports require the physical rpi value. */ + rpi = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + lpfc_unreg_login(phba, vport->vpi, rpi, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); @@ -4179,7 +4176,8 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox); + lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, + mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -4203,7 +4201,8 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox); + lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, + mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -4653,10 +4652,7 @@ lpfc_disc_start(struct lpfc_vport *vport) if (num_sent) return; - /* - * For SLI3, cmpl_reg_vpi will set port_state to READY, and - * continue discovery. - */ + /* Register the VPI for SLI3, NON-NPIV only. */ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && !(vport->fc_flag & FC_PT2PT) && !(vport->fc_flag & FC_RSCN_MODE) && @@ -4943,7 +4939,7 @@ restart_disc: if (phba->sli_rev < LPFC_SLI_REV4) { if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) lpfc_issue_reg_vpi(phba, vport); - else { /* NPIV Not enabled */ + else { lpfc_issue_clear_la(phba, vport); vport->port_state = LPFC_VPORT_READY; } @@ -5069,7 +5065,8 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) pmb->context1 = NULL; pmb->context2 = NULL; - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); @@ -5354,6 +5351,17 @@ lpfc_fcf_inuse(struct lpfc_hba *phba) for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); + /* + * IF the CVL_RCVD bit is not set then we have sent the + * flogi. + * If dev_loss fires while we are waiting we do not want to + * unreg the fcf. + */ + if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) { + spin_unlock_irq(shost->host_lock); + ret = 1; + goto out; + } list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport && (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 86b6f7e6686a..9059524cf225 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -64,6 +64,8 @@ #define SLI3_IOCB_CMD_SIZE 128 #define SLI3_IOCB_RSP_SIZE 64 +#define LPFC_UNREG_ALL_RPIS_VPORT 0xffff +#define LPFC_UNREG_ALL_DFLT_RPIS 0xffffffff /* vendor ID used in SCSI netlink calls */ #define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX) @@ -903,6 +905,8 @@ struct RRQ { /* Structure is in Big Endian format */ #define rrq_rxid_WORD rrq_exchg }; +#define LPFC_MAX_VFN_PER_PFN 255 /* Maximum VFs allowed per ARI */ +#define LPFC_DEF_VFN_PER_PFN 0 /* Default VFs due to platform limitation*/ struct RTV_RSP { /* Structure is in Big Endian format */ uint32_t ratov; @@ -1199,7 +1203,9 @@ typedef struct { #define PCI_DEVICE_ID_BALIUS 0xe131 #define PCI_DEVICE_ID_PROTEUS_PF 0xe180 #define PCI_DEVICE_ID_LANCER_FC 0xe200 +#define PCI_DEVICE_ID_LANCER_FC_VF 0xe208 #define PCI_DEVICE_ID_LANCER_FCOE 0xe260 +#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268 #define PCI_DEVICE_ID_SAT_SMB 0xf011 #define PCI_DEVICE_ID_SAT_MID 0xf015 #define PCI_DEVICE_ID_RFLY 0xf095 @@ -3021,7 +3027,7 @@ typedef struct { #define MAILBOX_EXT_SIZE (MAILBOX_EXT_WSIZE * sizeof(uint32_t)) #define MAILBOX_HBA_EXT_OFFSET 0x100 /* max mbox xmit size is a page size for sysfs IO operations */ -#define MAILBOX_MAX_XMIT_SIZE PAGE_SIZE +#define MAILBOX_SYSFS_MAX 4096 typedef union { uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/ diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 4dff668ebdad..11e26a26b5d1 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -170,6 +170,25 @@ struct lpfc_sli_intf { #define LPFC_PCI_FUNC3 3 #define LPFC_PCI_FUNC4 4 +/* SLI4 interface type-2 control register offsets */ +#define LPFC_CTL_PORT_SEM_OFFSET 0x400 +#define LPFC_CTL_PORT_STA_OFFSET 0x404 +#define LPFC_CTL_PORT_CTL_OFFSET 0x408 +#define LPFC_CTL_PORT_ER1_OFFSET 0x40C +#define LPFC_CTL_PORT_ER2_OFFSET 0x410 +#define LPFC_CTL_PDEV_CTL_OFFSET 0x414 + +/* Some SLI4 interface type-2 PDEV_CTL register bits */ +#define LPFC_CTL_PDEV_CTL_DRST 0x00000001 +#define LPFC_CTL_PDEV_CTL_FRST 0x00000002 +#define LPFC_CTL_PDEV_CTL_DD 0x00000004 +#define LPFC_CTL_PDEV_CTL_LC 0x00000008 +#define LPFC_CTL_PDEV_CTL_FRL_ALL 0x00 +#define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE 0x10 +#define LPFC_CTL_PDEV_CTL_FRL_NIC 0x20 + +#define LPFC_FW_DUMP_REQUEST (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST) + /* Active interrupt test count */ #define LPFC_ACT_INTR_CNT 4 @@ -210,9 +229,26 @@ struct ulp_bde64 { struct lpfc_sli4_flags { uint32_t word0; -#define lpfc_fip_flag_SHIFT 0 -#define lpfc_fip_flag_MASK 0x00000001 -#define lpfc_fip_flag_WORD word0 +#define lpfc_idx_rsrc_rdy_SHIFT 0 +#define lpfc_idx_rsrc_rdy_MASK 0x00000001 +#define lpfc_idx_rsrc_rdy_WORD word0 +#define LPFC_IDX_RSRC_RDY 1 +#define lpfc_xri_rsrc_rdy_SHIFT 1 +#define lpfc_xri_rsrc_rdy_MASK 0x00000001 +#define lpfc_xri_rsrc_rdy_WORD word0 +#define LPFC_XRI_RSRC_RDY 1 +#define lpfc_rpi_rsrc_rdy_SHIFT 2 +#define lpfc_rpi_rsrc_rdy_MASK 0x00000001 +#define lpfc_rpi_rsrc_rdy_WORD word0 +#define LPFC_RPI_RSRC_RDY 1 +#define lpfc_vpi_rsrc_rdy_SHIFT 3 +#define lpfc_vpi_rsrc_rdy_MASK 0x00000001 +#define lpfc_vpi_rsrc_rdy_WORD word0 +#define LPFC_VPI_RSRC_RDY 1 +#define lpfc_vfi_rsrc_rdy_SHIFT 4 +#define lpfc_vfi_rsrc_rdy_MASK 0x00000001 +#define lpfc_vfi_rsrc_rdy_WORD word0 +#define LPFC_VFI_RSRC_RDY 1 }; struct sli4_bls_rsp { @@ -739,6 +775,12 @@ union lpfc_sli4_cfg_shdr { #define lpfc_mbox_hdr_version_SHIFT 0 #define lpfc_mbox_hdr_version_MASK 0x000000FF #define lpfc_mbox_hdr_version_WORD word9 +#define lpfc_mbox_hdr_pf_num_SHIFT 16 +#define lpfc_mbox_hdr_pf_num_MASK 0x000000FF +#define lpfc_mbox_hdr_pf_num_WORD word9 +#define lpfc_mbox_hdr_vh_num_SHIFT 24 +#define lpfc_mbox_hdr_vh_num_MASK 0x000000FF +#define lpfc_mbox_hdr_vh_num_WORD word9 #define LPFC_Q_CREATE_VERSION_2 2 #define LPFC_Q_CREATE_VERSION_1 1 #define LPFC_Q_CREATE_VERSION_0 0 @@ -766,12 +808,22 @@ union lpfc_sli4_cfg_shdr { } response; }; -/* Mailbox structures */ +/* Mailbox Header structures. + * struct mbox_header is defined for first generation SLI4_CFG mailbox + * calls deployed for BE-based ports. + * + * struct sli4_mbox_header is defined for second generation SLI4 + * ports that don't deploy the SLI4_CFG mechanism. + */ struct mbox_header { struct lpfc_sli4_cfg_mhdr cfg_mhdr; union lpfc_sli4_cfg_shdr cfg_shdr; }; +#define LPFC_EXTENT_LOCAL 0 +#define LPFC_TIMEOUT_DEFAULT 0 +#define LPFC_EXTENT_VERSION_DEFAULT 0 + /* Subsystem Definitions */ #define LPFC_MBOX_SUBSYSTEM_COMMON 0x1 #define LPFC_MBOX_SUBSYSTEM_FCOE 0xC @@ -794,6 +846,13 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A #define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A +#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A +#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B +#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C +#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D +#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0 +#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4 +#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC #define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5 /* FCoE Opcodes */ @@ -808,6 +867,8 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A #define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B #define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10 +#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22 +#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23 /* Mailbox command structures */ struct eq_context { @@ -1210,6 +1271,187 @@ struct lpfc_mbx_mq_destroy { } u; }; +/* Start Gen 2 SLI4 Mailbox definitions: */ + +/* Define allocate-ready Gen 2 SLI4 FCoE Resource Extent Types. */ +#define LPFC_RSC_TYPE_FCOE_VFI 0x20 +#define LPFC_RSC_TYPE_FCOE_VPI 0x21 +#define LPFC_RSC_TYPE_FCOE_RPI 0x22 +#define LPFC_RSC_TYPE_FCOE_XRI 0x23 + +struct lpfc_mbx_get_rsrc_extent_info { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_mbx_get_rsrc_extent_info_type_SHIFT 0 +#define lpfc_mbx_get_rsrc_extent_info_type_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_type_WORD word4 + } req; + struct { + uint32_t word4; +#define lpfc_mbx_get_rsrc_extent_info_cnt_SHIFT 0 +#define lpfc_mbx_get_rsrc_extent_info_cnt_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_cnt_WORD word4 +#define lpfc_mbx_get_rsrc_extent_info_size_SHIFT 16 +#define lpfc_mbx_get_rsrc_extent_info_size_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_size_WORD word4 + } rsp; + } u; +}; + +struct lpfc_id_range { + uint32_t word5; +#define lpfc_mbx_rsrc_id_word4_0_SHIFT 0 +#define lpfc_mbx_rsrc_id_word4_0_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_id_word4_0_WORD word5 +#define lpfc_mbx_rsrc_id_word4_1_SHIFT 16 +#define lpfc_mbx_rsrc_id_word4_1_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_id_word4_1_WORD word5 +}; + +struct lpfc_mbx_set_link_diag_state { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_set_diag_state_diag_SHIFT 0 +#define lpfc_mbx_set_diag_state_diag_MASK 0x00000001 +#define lpfc_mbx_set_diag_state_diag_WORD word0 +#define lpfc_mbx_set_diag_state_link_num_SHIFT 16 +#define lpfc_mbx_set_diag_state_link_num_MASK 0x0000003F +#define lpfc_mbx_set_diag_state_link_num_WORD word0 +#define lpfc_mbx_set_diag_state_link_type_SHIFT 22 +#define lpfc_mbx_set_diag_state_link_type_MASK 0x00000003 +#define lpfc_mbx_set_diag_state_link_type_WORD word0 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + +struct lpfc_mbx_set_link_diag_loopback { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_set_diag_lpbk_type_SHIFT 0 +#define lpfc_mbx_set_diag_lpbk_type_MASK 0x00000001 +#define lpfc_mbx_set_diag_lpbk_type_WORD word0 +#define LPFC_DIAG_LOOPBACK_TYPE_DISABLE 0x0 +#define LPFC_DIAG_LOOPBACK_TYPE_INTERNAL 0x1 +#define LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL 0x2 +#define lpfc_mbx_set_diag_lpbk_link_num_SHIFT 16 +#define lpfc_mbx_set_diag_lpbk_link_num_MASK 0x0000003F +#define lpfc_mbx_set_diag_lpbk_link_num_WORD word0 +#define lpfc_mbx_set_diag_lpbk_link_type_SHIFT 22 +#define lpfc_mbx_set_diag_lpbk_link_type_MASK 0x00000003 +#define lpfc_mbx_set_diag_lpbk_link_type_WORD word0 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + +struct lpfc_mbx_run_link_diag_test { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_run_diag_test_link_num_SHIFT 16 +#define lpfc_mbx_run_diag_test_link_num_MASK 0x0000003F +#define lpfc_mbx_run_diag_test_link_num_WORD word0 +#define lpfc_mbx_run_diag_test_link_type_SHIFT 22 +#define lpfc_mbx_run_diag_test_link_type_MASK 0x00000003 +#define lpfc_mbx_run_diag_test_link_type_WORD word0 + uint32_t word1; +#define lpfc_mbx_run_diag_test_test_id_SHIFT 0 +#define lpfc_mbx_run_diag_test_test_id_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_test_id_WORD word1 +#define lpfc_mbx_run_diag_test_loops_SHIFT 16 +#define lpfc_mbx_run_diag_test_loops_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_loops_WORD word1 + uint32_t word2; +#define lpfc_mbx_run_diag_test_test_ver_SHIFT 0 +#define lpfc_mbx_run_diag_test_test_ver_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_test_ver_WORD word2 +#define lpfc_mbx_run_diag_test_err_act_SHIFT 16 +#define lpfc_mbx_run_diag_test_err_act_MASK 0x000000FF +#define lpfc_mbx_run_diag_test_err_act_WORD word2 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + +/* + * struct lpfc_mbx_alloc_rsrc_extents: + * A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires + * 6 words of header + 4 words of shared subcommand header + + * 1 words of Extent-Opcode-specific header = 11 words or 44 bytes total. + * + * An embedded version of SLI4_CONFIG therefore has 256 - 44 = 212 bytes + * for extents payload. + * + * 212/2 (bytes per extent) = 106 extents. + * 106/2 (extents per word) = 53 words. + * lpfc_id_range id is statically size to 53. + * + * This mailbox definition is used for ALLOC or GET_ALLOCATED + * extent ranges. For ALLOC, the type and cnt are required. + * For GET_ALLOCATED, only the type is required. + */ +struct lpfc_mbx_alloc_rsrc_extents { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_mbx_alloc_rsrc_extents_type_SHIFT 0 +#define lpfc_mbx_alloc_rsrc_extents_type_MASK 0x0000FFFF +#define lpfc_mbx_alloc_rsrc_extents_type_WORD word4 +#define lpfc_mbx_alloc_rsrc_extents_cnt_SHIFT 16 +#define lpfc_mbx_alloc_rsrc_extents_cnt_MASK 0x0000FFFF +#define lpfc_mbx_alloc_rsrc_extents_cnt_WORD word4 + } req; + struct { + uint32_t word4; +#define lpfc_mbx_rsrc_cnt_SHIFT 0 +#define lpfc_mbx_rsrc_cnt_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_cnt_WORD word4 + struct lpfc_id_range id[53]; + } rsp; + } u; +}; + +/* + * This is the non-embedded version of ALLOC or GET RSRC_EXTENTS. Word4 in this + * structure shares the same SHIFT/MASK/WORD defines provided in the + * mbx_alloc_rsrc_extents and mbx_get_alloc_rsrc_extents, word4, provided in + * the structures defined above. This non-embedded structure provides for the + * maximum number of extents supported by the port. + */ +struct lpfc_mbx_nembed_rsrc_extent { + union lpfc_sli4_cfg_shdr cfg_shdr; + uint32_t word4; + struct lpfc_id_range id; +}; + +struct lpfc_mbx_dealloc_rsrc_extents { + struct mbox_header header; + struct { + uint32_t word4; +#define lpfc_mbx_dealloc_rsrc_extents_type_SHIFT 0 +#define lpfc_mbx_dealloc_rsrc_extents_type_MASK 0x0000FFFF +#define lpfc_mbx_dealloc_rsrc_extents_type_WORD word4 + } req; + +}; + +/* Start SLI4 FCoE specific mbox structures. */ + struct lpfc_mbx_post_hdr_tmpl { struct mbox_header header; uint32_t word10; @@ -1229,7 +1471,7 @@ struct sli4_sge { /* SLI-4 */ uint32_t word2; #define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/ -#define lpfc_sli4_sge_offset_MASK 0x00FFFFFF +#define lpfc_sli4_sge_offset_MASK 0x1FFFFFFF #define lpfc_sli4_sge_offset_WORD word2 #define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets this flag !! */ @@ -1773,61 +2015,31 @@ struct lpfc_mbx_read_rev { struct lpfc_mbx_read_config { uint32_t word1; -#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0 -#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF -#define lpfc_mbx_rd_conf_max_bbc_WORD word1 -#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8 -#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF -#define lpfc_mbx_rd_conf_init_bbc_WORD word1 +#define lpfc_mbx_rd_conf_extnts_inuse_SHIFT 31 +#define lpfc_mbx_rd_conf_extnts_inuse_MASK 0x00000001 +#define lpfc_mbx_rd_conf_extnts_inuse_WORD word1 uint32_t word2; -#define lpfc_mbx_rd_conf_nport_did_SHIFT 0 -#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF -#define lpfc_mbx_rd_conf_nport_did_WORD word2 #define lpfc_mbx_rd_conf_topology_SHIFT 24 #define lpfc_mbx_rd_conf_topology_MASK 0x000000FF #define lpfc_mbx_rd_conf_topology_WORD word2 - uint32_t word3; -#define lpfc_mbx_rd_conf_ao_SHIFT 0 -#define lpfc_mbx_rd_conf_ao_MASK 0x00000001 -#define lpfc_mbx_rd_conf_ao_WORD word3 -#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8 -#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F -#define lpfc_mbx_rd_conf_bb_scn_WORD word3 -#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12 -#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F -#define lpfc_mbx_rd_conf_cbb_scn_WORD word3 -#define lpfc_mbx_rd_conf_mc_SHIFT 29 -#define lpfc_mbx_rd_conf_mc_MASK 0x00000001 -#define lpfc_mbx_rd_conf_mc_WORD word3 + uint32_t rsvd_3; uint32_t word4; #define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0 #define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_e_d_tov_WORD word4 - uint32_t word5; -#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF -#define lpfc_mbx_rd_conf_lp_tov_WORD word5 + uint32_t rsvd_5; uint32_t word6; #define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0 #define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_r_a_tov_WORD word6 - uint32_t word7; -#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF -#define lpfc_mbx_rd_conf_r_t_tov_WORD word7 - uint32_t word8; -#define lpfc_mbx_rd_conf_al_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F -#define lpfc_mbx_rd_conf_al_tov_WORD word8 + uint32_t rsvd_7; + uint32_t rsvd_8; uint32_t word9; #define lpfc_mbx_rd_conf_lmt_SHIFT 0 #define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_lmt_WORD word9 - uint32_t word10; -#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0 -#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF -#define lpfc_mbx_rd_conf_max_alpa_WORD word10 - uint32_t word11_rsvd; + uint32_t rsvd_10; + uint32_t rsvd_11; uint32_t word12; #define lpfc_mbx_rd_conf_xri_base_SHIFT 0 #define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF @@ -1857,9 +2069,6 @@ struct lpfc_mbx_read_config { #define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_vfi_count_WORD word15 uint32_t word16; -#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0 -#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF -#define lpfc_mbx_rd_conf_fcfi_base_WORD word16 #define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16 #define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_fcfi_count_WORD word16 @@ -2169,6 +2378,12 @@ struct lpfc_sli4_parameters { #define cfg_fcoe_SHIFT 0 #define cfg_fcoe_MASK 0x00000001 #define cfg_fcoe_WORD word12 +#define cfg_ext_SHIFT 1 +#define cfg_ext_MASK 0x00000001 +#define cfg_ext_WORD word12 +#define cfg_hdrr_SHIFT 2 +#define cfg_hdrr_MASK 0x00000001 +#define cfg_hdrr_WORD word12 #define cfg_phwq_SHIFT 15 #define cfg_phwq_MASK 0x00000001 #define cfg_phwq_WORD word12 @@ -2198,6 +2413,145 @@ struct lpfc_mbx_get_sli4_parameters { struct lpfc_sli4_parameters sli4_parameters; }; +struct lpfc_rscr_desc_generic { +#define LPFC_RSRC_DESC_WSIZE 18 + uint32_t desc[LPFC_RSRC_DESC_WSIZE]; +}; + +struct lpfc_rsrc_desc_pcie { + uint32_t word0; +#define lpfc_rsrc_desc_pcie_type_SHIFT 0 +#define lpfc_rsrc_desc_pcie_type_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_type_WORD word0 +#define LPFC_RSRC_DESC_TYPE_PCIE 0x40 + uint32_t word1; +#define lpfc_rsrc_desc_pcie_pfnum_SHIFT 0 +#define lpfc_rsrc_desc_pcie_pfnum_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pfnum_WORD word1 + uint32_t reserved; + uint32_t word3; +#define lpfc_rsrc_desc_pcie_sriov_sta_SHIFT 0 +#define lpfc_rsrc_desc_pcie_sriov_sta_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_sriov_sta_WORD word3 +#define lpfc_rsrc_desc_pcie_pf_sta_SHIFT 8 +#define lpfc_rsrc_desc_pcie_pf_sta_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pf_sta_WORD word3 +#define lpfc_rsrc_desc_pcie_pf_type_SHIFT 16 +#define lpfc_rsrc_desc_pcie_pf_type_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pf_type_WORD word3 + uint32_t word4; +#define lpfc_rsrc_desc_pcie_nr_virtfn_SHIFT 0 +#define lpfc_rsrc_desc_pcie_nr_virtfn_MASK 0x0000ffff +#define lpfc_rsrc_desc_pcie_nr_virtfn_WORD word4 +}; + +struct lpfc_rsrc_desc_fcfcoe { + uint32_t word0; +#define lpfc_rsrc_desc_fcfcoe_type_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_type_MASK 0x000000ff +#define lpfc_rsrc_desc_fcfcoe_type_WORD word0 +#define LPFC_RSRC_DESC_TYPE_FCFCOE 0x43 + uint32_t word1; +#define lpfc_rsrc_desc_fcfcoe_vfnum_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_vfnum_MASK 0x000000ff +#define lpfc_rsrc_desc_fcfcoe_vfnum_WORD word1 +#define lpfc_rsrc_desc_fcfcoe_pfnum_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_pfnum_MASK 0x000007ff +#define lpfc_rsrc_desc_fcfcoe_pfnum_WORD word1 + uint32_t word2; +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_WORD word2 +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_WORD word2 + uint32_t word3; +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_WORD word3 +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_WORD word3 + uint32_t word4; +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_WORD word4 +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_WORD word4 + uint32_t word5; +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_WORD word5 +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_WORD word5 + uint32_t word6; + uint32_t word7; + uint32_t word8; + uint32_t word9; + uint32_t word10; + uint32_t word11; + uint32_t word12; + uint32_t word13; +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_MASK 0x0000003f +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_SHIFT 6 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_MASK 0x00000003 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lmc_SHIFT 8 +#define lpfc_rsrc_desc_fcfcoe_lmc_MASK 0x00000001 +#define lpfc_rsrc_desc_fcfcoe_lmc_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lld_SHIFT 9 +#define lpfc_rsrc_desc_fcfcoe_lld_MASK 0x00000001 +#define lpfc_rsrc_desc_fcfcoe_lld_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_WORD word13 +}; + +struct lpfc_func_cfg { +#define LPFC_RSRC_DESC_MAX_NUM 2 + uint32_t rsrc_desc_count; + struct lpfc_rscr_desc_generic desc[LPFC_RSRC_DESC_MAX_NUM]; +}; + +struct lpfc_mbx_get_func_cfg { + struct mbox_header header; +#define LPFC_CFG_TYPE_PERSISTENT_OVERRIDE 0x0 +#define LPFC_CFG_TYPE_FACTURY_DEFAULT 0x1 +#define LPFC_CFG_TYPE_CURRENT_ACTIVE 0x2 + struct lpfc_func_cfg func_cfg; +}; + +struct lpfc_prof_cfg { +#define LPFC_RSRC_DESC_MAX_NUM 2 + uint32_t rsrc_desc_count; + struct lpfc_rscr_desc_generic desc[LPFC_RSRC_DESC_MAX_NUM]; +}; + +struct lpfc_mbx_get_prof_cfg { + struct mbox_header header; +#define LPFC_CFG_TYPE_PERSISTENT_OVERRIDE 0x0 +#define LPFC_CFG_TYPE_FACTURY_DEFAULT 0x1 +#define LPFC_CFG_TYPE_CURRENT_ACTIVE 0x2 + union { + struct { + uint32_t word10; +#define lpfc_mbx_get_prof_cfg_prof_id_SHIFT 0 +#define lpfc_mbx_get_prof_cfg_prof_id_MASK 0x000000ff +#define lpfc_mbx_get_prof_cfg_prof_id_WORD word10 +#define lpfc_mbx_get_prof_cfg_prof_tp_SHIFT 8 +#define lpfc_mbx_get_prof_cfg_prof_tp_MASK 0x00000003 +#define lpfc_mbx_get_prof_cfg_prof_tp_WORD word10 + } request; + struct { + struct lpfc_prof_cfg prof_cfg; + } response; + } u; +}; + /* Mailbox Completion Queue Error Messages */ #define MB_CQE_STATUS_SUCCESS 0x0 #define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1 @@ -2206,6 +2560,29 @@ struct lpfc_mbx_get_sli4_parameters { #define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4 #define MB_CQE_STATUS_DMA_FAILED 0x5 +#define LPFC_MBX_WR_CONFIG_MAX_BDE 8 +struct lpfc_mbx_wr_object { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_wr_object_eof_SHIFT 31 +#define lpfc_wr_object_eof_MASK 0x00000001 +#define lpfc_wr_object_eof_WORD word4 +#define lpfc_wr_object_write_length_SHIFT 0 +#define lpfc_wr_object_write_length_MASK 0x00FFFFFF +#define lpfc_wr_object_write_length_WORD word4 + uint32_t write_offset; + uint32_t object_name[26]; + uint32_t bde_count; + struct ulp_bde64 bde[LPFC_MBX_WR_CONFIG_MAX_BDE]; + } request; + struct { + uint32_t actual_write_length; + } response; + } u; +}; + /* mailbox queue entry structure */ struct lpfc_mqe { uint32_t word0; @@ -2241,6 +2618,9 @@ struct lpfc_mqe { struct lpfc_mbx_cq_destroy cq_destroy; struct lpfc_mbx_wq_destroy wq_destroy; struct lpfc_mbx_rq_destroy rq_destroy; + struct lpfc_mbx_get_rsrc_extent_info rsrc_extent_info; + struct lpfc_mbx_alloc_rsrc_extents alloc_rsrc_extents; + struct lpfc_mbx_dealloc_rsrc_extents dealloc_rsrc_extents; struct lpfc_mbx_post_sgl_pages post_sgl_pages; struct lpfc_mbx_nembed_cmd nembed_cmd; struct lpfc_mbx_read_rev read_rev; @@ -2252,7 +2632,13 @@ struct lpfc_mqe { struct lpfc_mbx_supp_pages supp_pages; struct lpfc_mbx_pc_sli4_params sli4_params; struct lpfc_mbx_get_sli4_parameters get_sli4_parameters; + struct lpfc_mbx_set_link_diag_state link_diag_state; + struct lpfc_mbx_set_link_diag_loopback link_diag_loopback; + struct lpfc_mbx_run_link_diag_test link_diag_test; + struct lpfc_mbx_get_func_cfg get_func_cfg; + struct lpfc_mbx_get_prof_cfg get_prof_cfg; struct lpfc_mbx_nop nop; + struct lpfc_mbx_wr_object wr_object; } un; }; @@ -2458,7 +2844,7 @@ struct lpfc_bmbx_create { #define SGL_ALIGN_SZ 64 #define SGL_PAGE_SIZE 4096 /* align SGL addr on a size boundary - adjust address up */ -#define NO_XRI ((uint16_t)-1) +#define NO_XRI 0xffff struct wqe_common { uint32_t word6; @@ -2798,9 +3184,28 @@ union lpfc_wqe { struct gen_req64_wqe gen_req; }; +#define LPFC_GROUP_OJECT_MAGIC_NUM 0xfeaa0001 +#define LPFC_FILE_TYPE_GROUP 0xf7 +#define LPFC_FILE_ID_GROUP 0xa2 +struct lpfc_grp_hdr { + uint32_t size; + uint32_t magic_number; + uint32_t word2; +#define lpfc_grp_hdr_file_type_SHIFT 24 +#define lpfc_grp_hdr_file_type_MASK 0x000000FF +#define lpfc_grp_hdr_file_type_WORD word2 +#define lpfc_grp_hdr_id_SHIFT 16 +#define lpfc_grp_hdr_id_MASK 0x000000FF +#define lpfc_grp_hdr_id_WORD word2 + uint8_t rev_name[128]; +}; + #define FCP_COMMAND 0x0 #define FCP_COMMAND_DATA_OUT 0x1 #define ELS_COMMAND_NON_FIP 0xC #define ELS_COMMAND_FIP 0xD #define OTHER_COMMAND 0x8 +#define LPFC_FW_DUMP 1 +#define LPFC_FW_RESET 2 +#define LPFC_DV_RESET 3 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 7dda036a1af3..148b98ddbb1d 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -30,6 +30,7 @@ #include <linux/ctype.h> #include <linux/aer.h> #include <linux/slab.h> +#include <linux/firmware.h> #include <scsi/scsi.h> #include <scsi/scsi_device.h> @@ -211,7 +212,6 @@ lpfc_config_port_prep(struct lpfc_hba *phba) lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); if (!lpfc_vpd_data) goto out_free_mbox; - do { lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); @@ -309,6 +309,45 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) } /** + * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname, + * cfg_soft_wwnn, cfg_soft_wwpn + * @vport: pointer to lpfc vport data structure. + * + * + * Return codes + * None. + **/ +void +lpfc_update_vport_wwn(struct lpfc_vport *vport) +{ + /* If the soft name exists then update it using the service params */ + if (vport->phba->cfg_soft_wwnn) + u64_to_wwn(vport->phba->cfg_soft_wwnn, + vport->fc_sparam.nodeName.u.wwn); + if (vport->phba->cfg_soft_wwpn) + u64_to_wwn(vport->phba->cfg_soft_wwpn, + vport->fc_sparam.portName.u.wwn); + + /* + * If the name is empty or there exists a soft name + * then copy the service params name, otherwise use the fc name + */ + if (vport->fc_nodename.u.wwn[0] == 0 || vport->phba->cfg_soft_wwnn) + memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, + sizeof(struct lpfc_name)); + else + memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename, + sizeof(struct lpfc_name)); + + if (vport->fc_portname.u.wwn[0] == 0 || vport->phba->cfg_soft_wwpn) + memcpy(&vport->fc_portname, &vport->fc_sparam.portName, + sizeof(struct lpfc_name)); + else + memcpy(&vport->fc_sparam.portName, &vport->fc_portname, + sizeof(struct lpfc_name)); +} + +/** * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. * @@ -377,17 +416,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); pmb->context1 = NULL; - - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof (struct lpfc_name)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof (struct lpfc_name)); + lpfc_update_vport_wwn(vport); /* Update the fc_host data structures with new wwn. */ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); @@ -573,7 +602,6 @@ lpfc_config_port_post(struct lpfc_hba *phba) /* Clear all pending interrupts */ writel(0xffffffff, phba->HAregaddr); readl(phba->HAregaddr); /* flush */ - phba->link_state = LPFC_HBA_ERROR; if (rc != MBX_BUSY) mempool_free(pmb, phba->mbox_mem_pool); @@ -1755,7 +1783,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) && descp && descp[0] != '\0') return; - if (phba->lmt & LMT_10Gb) + if (phba->lmt & LMT_16Gb) + max_speed = 16; + else if (phba->lmt & LMT_10Gb) max_speed = 10; else if (phba->lmt & LMT_8Gb) max_speed = 8; @@ -1922,12 +1952,13 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FC: - oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"}; + case PCI_DEVICE_ID_LANCER_FC_VF: + m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FCOE: + case PCI_DEVICE_ID_LANCER_FCOE_VF: oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "FCoE"}; + m = (typeof(m)){"OCe50100", "PCIe", "FCoE"}; break; default: m = (typeof(m)){"Unknown", "", ""}; @@ -1936,7 +1967,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) if (mdp && mdp[0] == '\0') snprintf(mdp, 79,"%s", m.name); - /* oneConnect hba requires special processing, they are all initiators + /* + * oneConnect hba requires special processing, they are all initiators * and we put the port number on the end */ if (descp && descp[0] == '\0') { @@ -2656,6 +2688,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) kfree(io); phba->total_iocbq_bufs--; } + spin_unlock_irq(&phba->hbalock); return 0; } @@ -3612,6 +3645,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2718 Clear Virtual Link Received for VPI 0x%x" " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag); + vport = lpfc_find_vport_by_vpid(phba, acqe_fip->index - phba->vpi_base); ndlp = lpfc_sli4_perform_vport_cvl(vport); @@ -3935,6 +3969,10 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba) pci_try_set_mwi(pdev); pci_save_state(pdev); + /* PCIe EEH recovery on powerpc platforms needs fundamental reset */ + if (pci_find_capability(pdev, PCI_CAP_ID_EXP)) + pdev->needs_freset = 1; + return 0; out_disable_device: @@ -3997,6 +4035,36 @@ lpfc_reset_hba(struct lpfc_hba *phba) } /** + * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions + * @phba: pointer to lpfc hba data structure. + * @nr_vfn: number of virtual functions to be enabled. + * + * This function enables the PCI SR-IOV virtual functions to a physical + * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to + * enable the number of virtual functions to the physical function. As + * not all devices support SR-IOV, the return code from the pci_enable_sriov() + * API call does not considered as an error condition for most of the device. + **/ +int +lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn) +{ + struct pci_dev *pdev = phba->pcidev; + int rc; + + rc = pci_enable_sriov(pdev, nr_vfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2806 Failed to enable sriov on this device " + "with vfn number nr_vf:%d, rc:%d\n", + nr_vfn, rc); + } else + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2807 Successful enable sriov on this device " + "with vfn number nr_vf:%d\n", nr_vfn); + return rc; +} + +/** * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev. * @phba: pointer to lpfc hba data structure. * @@ -4011,6 +4079,7 @@ static int lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) { struct lpfc_sli *psli; + int rc; /* * Initialize timers used by driver @@ -4085,6 +4154,23 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ)) return -ENOMEM; + /* + * Enable sr-iov virtual functions if supported and configured + * through the module parameter. + */ + if (phba->cfg_sriov_nr_virtfn > 0) { + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, + phba->cfg_sriov_nr_virtfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2808 Requested number of SR-IOV " + "virtual functions (%d) is not " + "supported\n", + phba->cfg_sriov_nr_virtfn); + phba->cfg_sriov_nr_virtfn = 0; + } + } + return 0; } @@ -4161,6 +4247,14 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) phba->fcf.redisc_wait.data = (unsigned long)phba; /* + * Control structure for handling external multi-buffer mailbox + * command pass-through. + */ + memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0, + sizeof(struct lpfc_mbox_ext_buf_ctx)); + INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); + + /* * We need to do a READ_CONFIG mailbox command here before * calling lpfc_get_cfgparam. For VFs this will report the * MAX_XRI, MAX_VPI, MAX_RPI, MAX_IOCB, and MAX_VFI settings. @@ -4233,7 +4327,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock); /* - * Initialize dirver internal slow-path work queues + * Initialize driver internal slow-path work queues */ /* Driver internel slow-path CQ Event pool */ @@ -4249,6 +4343,12 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) /* Receive queue CQ Event work queue list */ INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue); + /* Initialize extent block lists. */ + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list); + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list); + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list); + INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list); + /* Initialize the driver internal SLI layer lists. */ lpfc_sli_setup(phba); lpfc_sli_queue_setup(phba); @@ -4323,9 +4423,19 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) } /* * Get sli4 parameters that override parameters from Port capabilities. - * If this call fails it is not a critical error so continue loading. + * If this call fails, it isn't critical unless the SLI4 parameters come + * back in conflict. */ - lpfc_get_sli4_parameters(phba, mboxq); + rc = lpfc_get_sli4_parameters(phba, mboxq); + if (rc) { + if (phba->sli4_hba.extents_in_use && + phba->sli4_hba.rpi_hdrs_in_use) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2999 Unsupported SLI4 Parameters " + "Extents and RPI headers enabled.\n"); + goto out_free_bsmbx; + } + } mempool_free(mboxq, phba->mbox_mem_pool); /* Create all the SLI4 queues */ rc = lpfc_sli4_queue_create(phba); @@ -4350,7 +4460,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) "1430 Failed to initialize sgl list.\n"); goto out_free_sgl_list; } - rc = lpfc_sli4_init_rpi_hdrs(phba); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -4366,6 +4475,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2759 Failed allocate memory for FCF round " "robin failover bmask\n"); + rc = -ENOMEM; goto out_remove_rpi_hdrs; } @@ -4375,6 +4485,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2572 Failed allocate memory for fast-path " "per-EQ handle array\n"); + rc = -ENOMEM; goto out_free_fcf_rr_bmask; } @@ -4384,9 +4495,27 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2573 Failed allocate memory for msi-x " "interrupt vector entries\n"); + rc = -ENOMEM; goto out_free_fcp_eq_hdl; } + /* + * Enable sr-iov virtual functions if supported and configured + * through the module parameter. + */ + if (phba->cfg_sriov_nr_virtfn > 0) { + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, + phba->cfg_sriov_nr_virtfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3020 Requested number of SR-IOV " + "virtual functions (%d) is not " + "supported\n", + phba->cfg_sriov_nr_virtfn); + phba->cfg_sriov_nr_virtfn = 0; + } + } + return rc; out_free_fcp_eq_hdl: @@ -4449,6 +4578,9 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba) lpfc_sli4_cq_event_release_all(phba); lpfc_sli4_cq_event_pool_destroy(phba); + /* Release resource identifiers. */ + lpfc_sli4_dealloc_resource_identifiers(phba); + /* Free the bsmbx region. */ lpfc_destroy_bootstrap_mbox(phba); @@ -4649,6 +4781,7 @@ lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count) "Unloading driver.\n", __func__); goto out_free_iocbq; } + iocbq_entry->sli4_lxritag = NO_XRI; iocbq_entry->sli4_xritag = NO_XRI; spin_lock_irq(&phba->hbalock); @@ -4746,7 +4879,7 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2400 lpfc_init_sgl_list els %d.\n", + "2400 ELS XRI count %d.\n", els_xri_cnt); /* Initialize and populate the sglq list per host/VF. */ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list); @@ -4779,7 +4912,6 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) phba->sli4_hba.scsi_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt; phba->sli4_hba.scsi_xri_cnt = 0; - phba->sli4_hba.lpfc_scsi_psb_array = kzalloc((sizeof(struct lpfc_scsi_buf *) * phba->sli4_hba.scsi_xri_max), GFP_KERNEL); @@ -4802,13 +4934,6 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) goto out_free_mem; } - sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba); - if (sglq_entry->sli4_xritag == NO_XRI) { - kfree(sglq_entry); - printk(KERN_ERR "%s: failed to allocate XRI.\n" - "Unloading driver.\n", __func__); - goto out_free_mem; - } sglq_entry->buff_type = GEN_BUFF_TYPE; sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys); if (sglq_entry->virt == NULL) { @@ -4857,24 +4982,20 @@ int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba) { int rc = 0; - int longs; - uint16_t rpi_count; struct lpfc_rpi_hdr *rpi_hdr; INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list); - /* - * Provision an rpi bitmask range for discovery. The total count - * is the difference between max and base + 1. + * If the SLI4 port supports extents, posting the rpi header isn't + * required. Set the expected maximum count and let the actual value + * get set when extents are fully allocated. */ - rpi_count = phba->sli4_hba.max_cfg_param.rpi_base + - phba->sli4_hba.max_cfg_param.max_rpi - 1; - - longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG; - phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long), - GFP_KERNEL); - if (!phba->sli4_hba.rpi_bmask) - return -ENOMEM; + if (!phba->sli4_hba.rpi_hdrs_in_use) { + phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi; + return rc; + } + if (phba->sli4_hba.extents_in_use) + return -EIO; rpi_hdr = lpfc_sli4_create_rpi_hdr(phba); if (!rpi_hdr) { @@ -4908,11 +5029,28 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) struct lpfc_rpi_hdr *rpi_hdr; uint32_t rpi_count; + /* + * If the SLI4 port supports extents, posting the rpi header isn't + * required. Set the expected maximum count and let the actual value + * get set when extents are fully allocated. + */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + return NULL; + if (phba->sli4_hba.extents_in_use) + return NULL; + + /* The limit on the logical index is just the max_rpi count. */ rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base + - phba->sli4_hba.max_cfg_param.max_rpi - 1; + phba->sli4_hba.max_cfg_param.max_rpi - 1; spin_lock_irq(&phba->hbalock); - curr_rpi_range = phba->sli4_hba.next_rpi; + /* + * Establish the starting RPI in this header block. The starting + * rpi is normalized to a zero base because the physical rpi is + * port based. + */ + curr_rpi_range = phba->sli4_hba.next_rpi - + phba->sli4_hba.max_cfg_param.rpi_base; spin_unlock_irq(&phba->hbalock); /* @@ -4925,6 +5063,8 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) else rpi_count = LPFC_RPI_HDR_COUNT; + if (!rpi_count) + return NULL; /* * First allocate the protocol header region for the port. The * port expects a 4KB DMA-mapped memory region that is 4K aligned. @@ -4957,12 +5097,14 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE; rpi_hdr->page_count = 1; spin_lock_irq(&phba->hbalock); - rpi_hdr->start_rpi = phba->sli4_hba.next_rpi; + + /* The rpi_hdr stores the logical index only. */ + rpi_hdr->start_rpi = curr_rpi_range; list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list); /* - * The next_rpi stores the next module-64 rpi value to post - * in any subsequent rpi memory region postings. + * The next_rpi stores the next logical module-64 rpi value used + * to post physical rpis in subsequent rpi postings. */ phba->sli4_hba.next_rpi += rpi_count; spin_unlock_irq(&phba->hbalock); @@ -4981,15 +5123,18 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) * @phba: pointer to lpfc hba data structure. * * This routine is invoked to remove all memory resources allocated - * to support rpis. This routine presumes the caller has released all - * rpis consumed by fabric or port logins and is prepared to have - * the header pages removed. + * to support rpis for SLI4 ports not supporting extents. This routine + * presumes the caller has released all rpis consumed by fabric or port + * logins and is prepared to have the header pages removed. **/ void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) { struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr; + if (!phba->sli4_hba.rpi_hdrs_in_use) + goto exit; + list_for_each_entry_safe(rpi_hdr, next_rpi_hdr, &phba->sli4_hba.lpfc_rpi_hdr_list, list) { list_del(&rpi_hdr->list); @@ -4998,9 +5143,9 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) kfree(rpi_hdr->dmabuf); kfree(rpi_hdr); } - - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base; - memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask)); + exit: + /* There are no rpis available to the port now. */ + phba->sli4_hba.next_rpi = 0; } /** @@ -5487,7 +5632,8 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba) /* Final checks. The port status should be clean. */ if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, ®_data.word0) || - bf_get(lpfc_sliport_status_err, ®_data)) { + (bf_get(lpfc_sliport_status_err, ®_data) && + !bf_get(lpfc_sliport_status_rn, ®_data))) { phba->work_status[0] = readl(phba->sli4_hba.u.if_type2. ERR1regaddr); @@ -5741,7 +5887,12 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmb; struct lpfc_mbx_read_config *rd_config; - uint32_t rc = 0; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + struct lpfc_mbx_get_func_cfg *get_func_cfg; + struct lpfc_rsrc_desc_fcfcoe *desc; + uint32_t desc_count; + int length, i, rc = 0; pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { @@ -5763,6 +5914,8 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) rc = -EIO; } else { rd_config = &pmb->u.mqe.un.rd_config; + phba->sli4_hba.extents_in_use = + bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config); phba->sli4_hba.max_cfg_param.max_xri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config); phba->sli4_hba.max_cfg_param.xri_base = @@ -5781,8 +5934,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config); phba->sli4_hba.max_cfg_param.max_fcfi = bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config); - phba->sli4_hba.max_cfg_param.fcfi_base = - bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config); phba->sli4_hba.max_cfg_param.max_eq = bf_get(lpfc_mbx_rd_conf_eq_count, rd_config); phba->sli4_hba.max_cfg_param.max_rq = @@ -5800,11 +5951,13 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2003 cfg params XRI(B:%d M:%d), " + "2003 cfg params Extents? %d " + "XRI(B:%d M:%d), " "VPI(B:%d M:%d) " "VFI(B:%d M:%d) " "RPI(B:%d M:%d) " - "FCFI(B:%d M:%d)\n", + "FCFI(Count:%d)\n", + phba->sli4_hba.extents_in_use, phba->sli4_hba.max_cfg_param.xri_base, phba->sli4_hba.max_cfg_param.max_xri, phba->sli4_hba.max_cfg_param.vpi_base, @@ -5813,10 +5966,11 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->sli4_hba.max_cfg_param.max_vfi, phba->sli4_hba.max_cfg_param.rpi_base, phba->sli4_hba.max_cfg_param.max_rpi, - phba->sli4_hba.max_cfg_param.fcfi_base, phba->sli4_hba.max_cfg_param.max_fcfi); } - mempool_free(pmb, phba->mbox_mem_pool); + + if (rc) + goto read_cfg_out; /* Reset the DFT_HBA_Q_DEPTH to the max xri */ if (phba->cfg_hba_queue_depth > @@ -5825,6 +5979,65 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->cfg_hba_queue_depth = phba->sli4_hba.max_cfg_param.max_xri - lpfc_sli4_get_els_iocb_cnt(phba); + + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + goto read_cfg_out; + + /* get the pf# and vf# for SLI4 if_type 2 port */ + length = (sizeof(struct lpfc_mbx_get_func_cfg) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG, + length, LPFC_SLI4_MBX_EMBED); + + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + shdr = (union lpfc_sli4_cfg_shdr *) + &pmb->u.mqe.un.sli4_config.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (rc || shdr_status || shdr_add_status) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3026 Mailbox failed , mbxCmd x%x " + "GET_FUNCTION_CONFIG, mbxStatus x%x\n", + bf_get(lpfc_mqe_command, &pmb->u.mqe), + bf_get(lpfc_mqe_status, &pmb->u.mqe)); + rc = -EIO; + goto read_cfg_out; + } + + /* search for fc_fcoe resrouce descriptor */ + get_func_cfg = &pmb->u.mqe.un.get_func_cfg; + desc_count = get_func_cfg->func_cfg.rsrc_desc_count; + + for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) { + desc = (struct lpfc_rsrc_desc_fcfcoe *) + &get_func_cfg->func_cfg.desc[i]; + if (LPFC_RSRC_DESC_TYPE_FCFCOE == + bf_get(lpfc_rsrc_desc_pcie_type, desc)) { + phba->sli4_hba.iov.pf_number = + bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc); + phba->sli4_hba.iov.vf_number = + bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc); + break; + } + } + + if (i < LPFC_RSRC_DESC_MAX_NUM) + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "3027 GET_FUNCTION_CONFIG: pf_number:%d, " + "vf_number:%d\n", phba->sli4_hba.iov.pf_number, + phba->sli4_hba.iov.vf_number); + else { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3028 GET_FUNCTION_CONFIG: failed to find " + "Resrouce Descriptor:x%x\n", + LPFC_RSRC_DESC_TYPE_FCFCOE); + rc = -EIO; + } + +read_cfg_out: + mempool_free(pmb, phba->mbox_mem_pool); return rc; } @@ -6229,8 +6442,10 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) phba->sli4_hba.mbx_cq = NULL; /* Release FCP response complete queue */ - for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) + fcp_qidx = 0; + do lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]); + while (++fcp_qidx < phba->cfg_fcp_eq_count); kfree(phba->sli4_hba.fcp_cq); phba->sli4_hba.fcp_cq = NULL; @@ -6353,16 +6568,24 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) phba->sli4_hba.sp_eq->queue_id); /* Set up fast-path FCP Response Complete Queue */ - for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) { + fcp_cqidx = 0; + do { if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0526 Fast-path FCP CQ (%d) not " "allocated\n", fcp_cqidx); goto out_destroy_fcp_cq; } - rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx], - phba->sli4_hba.fp_eq[fcp_cqidx], - LPFC_WCQ, LPFC_FCP); + if (phba->cfg_fcp_eq_count) + rc = lpfc_cq_create(phba, + phba->sli4_hba.fcp_cq[fcp_cqidx], + phba->sli4_hba.fp_eq[fcp_cqidx], + LPFC_WCQ, LPFC_FCP); + else + rc = lpfc_cq_create(phba, + phba->sli4_hba.fcp_cq[fcp_cqidx], + phba->sli4_hba.sp_eq, + LPFC_WCQ, LPFC_FCP); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0527 Failed setup of fast-path FCP " @@ -6371,12 +6594,15 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) } lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "2588 FCP CQ setup: cq[%d]-id=%d, " - "parent eq[%d]-id=%d\n", + "parent %seq[%d]-id=%d\n", fcp_cqidx, phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id, + (phba->cfg_fcp_eq_count) ? "" : "sp_", fcp_cqidx, - phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id); - } + (phba->cfg_fcp_eq_count) ? + phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id : + phba->sli4_hba.sp_eq->queue_id); + } while (++fcp_cqidx < phba->cfg_fcp_eq_count); /* * Set up all the Work Queues (WQs) @@ -6445,7 +6671,9 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) fcp_cq_index, phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id); /* Round robin FCP Work Queue's Completion Queue assignment */ - fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count); + if (phba->cfg_fcp_eq_count) + fcp_cq_index = ((fcp_cq_index + 1) % + phba->cfg_fcp_eq_count); } /* @@ -6827,6 +7055,8 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) if (rdy_chk < 1000) break; } + /* delay driver action following IF_TYPE_2 function reset */ + msleep(100); break; case LPFC_SLI_INTF_IF_TYPE_1: default: @@ -7419,11 +7649,15 @@ enable_msix_vectors: /* * Assign MSI-X vectors to interrupt handlers */ - - /* The first vector must associated to slow-path handler for MQ */ - rc = request_irq(phba->sli4_hba.msix_entries[0].vector, - &lpfc_sli4_sp_intr_handler, IRQF_SHARED, - LPFC_SP_DRIVER_HANDLER_NAME, phba); + if (vectors > 1) + rc = request_irq(phba->sli4_hba.msix_entries[0].vector, + &lpfc_sli4_sp_intr_handler, IRQF_SHARED, + LPFC_SP_DRIVER_HANDLER_NAME, phba); + else + /* All Interrupts need to be handled by one EQ */ + rc = request_irq(phba->sli4_hba.msix_entries[0].vector, + &lpfc_sli4_intr_handler, IRQF_SHARED, + LPFC_DRIVER_NAME, phba); if (rc) { lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0485 MSI-X slow-path request_irq failed " @@ -7765,6 +7999,7 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) { int wait_cnt = 0; LPFC_MBOXQ_t *mboxq; + struct pci_dev *pdev = phba->pcidev; lpfc_stop_hba_timers(phba); phba->sli4_hba.intr_enable = 0; @@ -7804,6 +8039,10 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) /* Disable PCI subsystem interrupt */ lpfc_sli4_disable_intr(phba); + /* Disable SR-IOV if enabled */ + if (phba->cfg_sriov_nr_virtfn) + pci_disable_sriov(pdev); + /* Stop kthread signal shall trigger work_done one more time */ kthread_stop(phba->worker_thread); @@ -7878,6 +8117,11 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params); sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params); sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params); + + /* Make sure that sge_supp_len can be handled by the driver */ + if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) + sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; + return rc; } @@ -7902,6 +8146,13 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) int length; struct lpfc_sli4_parameters *mbx_sli4_parameters; + /* + * By default, the driver assumes the SLI4 port requires RPI + * header postings. The SLI4_PARAM response will correct this + * assumption. + */ + phba->sli4_hba.rpi_hdrs_in_use = 1; + /* Read the port's SLI4 Config Parameters */ length = (sizeof(struct lpfc_mbx_get_sli4_parameters) - sizeof(struct lpfc_sli4_cfg_mhdr)); @@ -7938,6 +8189,13 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) mbx_sli4_parameters); sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align, mbx_sli4_parameters); + phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters); + phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters); + + /* Make sure that sge_supp_len can be handled by the driver */ + if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) + sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; + return 0; } @@ -8173,6 +8431,10 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev) lpfc_debugfs_terminate(vport); + /* Disable SR-IOV if enabled */ + if (phba->cfg_sriov_nr_virtfn) + pci_disable_sriov(pdev); + /* Disable interrupt */ lpfc_sli_disable_intr(phba); @@ -8565,6 +8827,97 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba) } /** + * lpfc_write_firmware - attempt to write a firmware image to the port + * @phba: pointer to lpfc hba data structure. + * @fw: pointer to firmware image returned from request_firmware. + * + * returns the number of bytes written if write is successful. + * returns a negative error value if there were errors. + * returns 0 if firmware matches currently active firmware on port. + **/ +int +lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw) +{ + char fwrev[32]; + struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data; + struct list_head dma_buffer_list; + int i, rc = 0; + struct lpfc_dmabuf *dmabuf, *next; + uint32_t offset = 0, temp_offset = 0; + + INIT_LIST_HEAD(&dma_buffer_list); + if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) || + (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) || + (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) || + (image->size != fw->size)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3022 Invalid FW image found. " + "Magic:%d Type:%x ID:%x\n", + image->magic_number, + bf_get(lpfc_grp_hdr_file_type, image), + bf_get(lpfc_grp_hdr_id, image)); + return -EINVAL; + } + lpfc_decode_firmware_rev(phba, fwrev, 1); + if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3023 Updating Firmware. Current Version:%s " + "New Version:%s\n", + fwrev, image->rev_name); + for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) { + dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), + GFP_KERNEL); + if (!dmabuf) { + rc = -ENOMEM; + goto out; + } + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + SLI4_PAGE_SIZE, + &dmabuf->phys, + GFP_KERNEL); + if (!dmabuf->virt) { + kfree(dmabuf); + rc = -ENOMEM; + goto out; + } + list_add_tail(&dmabuf->list, &dma_buffer_list); + } + while (offset < fw->size) { + temp_offset = offset; + list_for_each_entry(dmabuf, &dma_buffer_list, list) { + if (offset + SLI4_PAGE_SIZE > fw->size) { + temp_offset += fw->size - offset; + memcpy(dmabuf->virt, + fw->data + temp_offset, + fw->size - offset); + break; + } + temp_offset += SLI4_PAGE_SIZE; + memcpy(dmabuf->virt, fw->data + temp_offset, + SLI4_PAGE_SIZE); + } + rc = lpfc_wr_object(phba, &dma_buffer_list, + (fw->size - offset), &offset); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3024 Firmware update failed. " + "%d\n", rc); + goto out; + } + } + rc = offset; + } +out: + list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) { + list_del(&dmabuf->list); + dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + } + return rc; +} + +/** * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys * @pdev: pointer to PCI device * @pid: pointer to PCI device identifier @@ -8591,6 +8944,10 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) int error; uint32_t cfg_mode, intr_mode; int mcnt; + int adjusted_fcp_eq_count; + int fcp_qidx; + const struct firmware *fw; + uint8_t file_name[16]; /* Allocate memory for HBA structure */ phba = lpfc_hba_alloc(pdev); @@ -8688,11 +9045,25 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) error = -ENODEV; goto out_free_sysfs_attr; } - /* Default to single FCP EQ for non-MSI-X */ + /* Default to single EQ for non-MSI-X */ if (phba->intr_type != MSIX) - phba->cfg_fcp_eq_count = 1; - else if (phba->sli4_hba.msix_vec_nr < phba->cfg_fcp_eq_count) - phba->cfg_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1; + adjusted_fcp_eq_count = 0; + else if (phba->sli4_hba.msix_vec_nr < + phba->cfg_fcp_eq_count + 1) + adjusted_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1; + else + adjusted_fcp_eq_count = phba->cfg_fcp_eq_count; + /* Free unused EQs */ + for (fcp_qidx = adjusted_fcp_eq_count; + fcp_qidx < phba->cfg_fcp_eq_count; + fcp_qidx++) { + lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]); + /* do not delete the first fcp_cq */ + if (fcp_qidx) + lpfc_sli4_queue_free( + phba->sli4_hba.fcp_cq[fcp_qidx]); + } + phba->cfg_fcp_eq_count = adjusted_fcp_eq_count; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -8731,6 +9102,14 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Perform post initialization setup */ lpfc_post_init_setup(phba); + /* check for firmware upgrade or downgrade */ + snprintf(file_name, 16, "%s.grp", phba->ModelName); + error = request_firmware(&fw, file_name, &phba->pcidev->dev); + if (!error) { + lpfc_write_firmware(phba, fw); + release_firmware(fw); + } + /* Check if there are static vports to be created. */ lpfc_create_static_vport(phba); @@ -9498,6 +9877,10 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e6ce9033f85e..556767028353 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -610,7 +610,8 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); - mb->un.varRdSparm.vpi = vpi + phba->vpi_base; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varRdSparm.vpi = phba->vpi_ids[vpi]; /* save address for completion */ pmb->context1 = mp; @@ -643,9 +644,10 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregDID.did = did; - if (vpi != 0xffff) - vpi += phba->vpi_base; mb->un.varUnregDID.vpi = vpi; + if ((vpi != 0xffff) && + (phba->sli_rev == LPFC_SLI_REV4)) + mb->un.varUnregDID.vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_D_ID; mb->mbxOwner = OWN_HOST; @@ -738,12 +740,10 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRegLogin.rpi = 0; - if (phba->sli_rev == LPFC_SLI_REV4) { - mb->un.varRegLogin.rpi = rpi; - if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR) - return 1; - } - mb->un.varRegLogin.vpi = vpi + phba->vpi_base; + if (phba->sli_rev == LPFC_SLI_REV4) + mb->un.varRegLogin.rpi = phba->sli4_hba.rpi_ids[rpi]; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varRegLogin.vpi = phba->vpi_ids[vpi]; mb->un.varRegLogin.did = did; mb->mbxOwner = OWN_HOST; /* Get a buffer to hold NPorts Service Parameters */ @@ -757,7 +757,7 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, "0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, " "rpi x%x\n", vpi, did, rpi); - return (1); + return 1; } INIT_LIST_HEAD(&mp->list); sparam = mp->virt; @@ -773,7 +773,7 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys); - return (0); + return 0; } /** @@ -789,6 +789,9 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, * * This routine prepares the mailbox command for unregistering remote port * login. + * + * For SLI4 ports, the rpi passed to this function must be the physical + * rpi value, not the logical index. **/ void lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, @@ -799,9 +802,10 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varUnregLogin.rpi = (uint16_t) rpi; + mb->un.varUnregLogin.rpi = rpi; mb->un.varUnregLogin.rsvd1 = 0; - mb->un.varUnregLogin.vpi = vpi + phba->vpi_base; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varUnregLogin.vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_LOGIN; mb->mbxOwner = OWN_HOST; @@ -825,9 +829,16 @@ lpfc_sli4_unreg_all_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, - vport->vpi + phba->vpi_base, mbox); - mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000 ; + /* + * For SLI4 functions, the rpi field is overloaded for + * the vport context unreg all. This routine passes + * 0 for the rpi field in lpfc_unreg_login for compatibility + * with SLI3 and then overrides the rpi field with the + * expected value for SLI4. + */ + lpfc_unreg_login(phba, vport->vpi, phba->vpi_ids[vport->vpi], + mbox); + mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000; mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -865,9 +876,13 @@ lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb) if ((phba->sli_rev == LPFC_SLI_REV4) && !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) mb->un.varRegVpi.upd = 1; - mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base; + + mb->un.varRegVpi.vpi = phba->vpi_ids[vport->vpi]; mb->un.varRegVpi.sid = vport->fc_myDID; - mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; + if (phba->sli_rev == LPFC_SLI_REV4) + mb->un.varRegVpi.vfi = phba->sli4_hba.vfi_ids[vport->vfi]; + else + mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; memcpy(mb->un.varRegVpi.wwn, &vport->fc_portname, sizeof(struct lpfc_name)); mb->un.varRegVpi.wwn[0] = cpu_to_le32(mb->un.varRegVpi.wwn[0]); @@ -901,10 +916,10 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - if (phba->sli_rev < LPFC_SLI_REV4) - mb->un.varUnregVpi.vpi = vpi + phba->vpi_base; - else - mb->un.varUnregVpi.sli4_vpi = vpi + phba->vpi_base; + if (phba->sli_rev == LPFC_SLI_REV3) + mb->un.varUnregVpi.vpi = phba->vpi_ids[vpi]; + else if (phba->sli_rev >= LPFC_SLI_REV4) + mb->un.varUnregVpi.sli4_vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_VPI; mb->mbxOwner = OWN_HOST; @@ -1735,12 +1750,12 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, return length; } - /* Setup for the none-embedded mbox command */ + /* Setup for the non-embedded mbox command */ pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE; pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; /* Allocate record for keeping SGE virtual addresses */ - mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), + mbox->sge_array = kzalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), GFP_KERNEL); if (!mbox->sge_array) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, @@ -1790,12 +1805,87 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, /* The sub-header is in DMA memory, which needs endian converstion */ if (cfg_shdr) lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, - sizeof(union lpfc_sli4_cfg_shdr)); - + sizeof(union lpfc_sli4_cfg_shdr)); return alloc_len; } /** + * lpfc_sli4_mbox_rsrc_extent - Initialize the opcode resource extent. + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to an allocated lpfc mbox resource. + * @exts_count: the number of extents, if required, to allocate. + * @rsrc_type: the resource extent type. + * @emb: true if LPFC_SLI4_MBX_EMBED. false if LPFC_SLI4_MBX_NEMBED. + * + * This routine completes the subcommand header for SLI4 resource extent + * mailbox commands. It is called after lpfc_sli4_config. The caller must + * pass an allocated mailbox and the attributes required to initialize the + * mailbox correctly. + * + * Return: the actual length of the mbox command allocated. + **/ +int +lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox, + uint16_t exts_count, uint16_t rsrc_type, bool emb) +{ + uint8_t opcode = 0; + struct lpfc_mbx_nembed_rsrc_extent *n_rsrc_extnt = NULL; + void *virtaddr = NULL; + + /* Set up SLI4 ioctl command header fields */ + if (emb == LPFC_SLI4_MBX_NEMBED) { + /* Get the first SGE entry from the non-embedded DMA memory */ + virtaddr = mbox->sge_array->addr[0]; + if (virtaddr == NULL) + return 1; + n_rsrc_extnt = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr; + } + + /* + * The resource type is common to all extent Opcodes and resides in the + * same position. + */ + if (emb == LPFC_SLI4_MBX_EMBED) + bf_set(lpfc_mbx_alloc_rsrc_extents_type, + &mbox->u.mqe.un.alloc_rsrc_extents.u.req, + rsrc_type); + else { + /* This is DMA data. Byteswap is required. */ + bf_set(lpfc_mbx_alloc_rsrc_extents_type, + n_rsrc_extnt, rsrc_type); + lpfc_sli_pcimem_bcopy(&n_rsrc_extnt->word4, + &n_rsrc_extnt->word4, + sizeof(uint32_t)); + } + + /* Complete the initialization for the particular Opcode. */ + opcode = lpfc_sli4_mbox_opcode_get(phba, mbox); + switch (opcode) { + case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT: + if (emb == LPFC_SLI4_MBX_EMBED) + bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, + &mbox->u.mqe.un.alloc_rsrc_extents.u.req, + exts_count); + else + bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, + n_rsrc_extnt, exts_count); + break; + case LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT: + case LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO: + case LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT: + /* Initialization is complete.*/ + break; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "2929 Resource Extent Opcode x%x is " + "unsupported\n", opcode); + return 1; + } + + return 0; +} + +/** * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command * @phba: pointer to lpfc hba data structure. * @mbox: pointer to lpfc mbox command. @@ -1939,9 +2029,12 @@ lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) bf_set(lpfc_init_vfi_vr, init_vfi, 1); bf_set(lpfc_init_vfi_vt, init_vfi, 1); bf_set(lpfc_init_vfi_vp, init_vfi, 1); - bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base); - bf_set(lpfc_init_vpi_vpi, init_vfi, vport->vpi + vport->phba->vpi_base); - bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi); + bf_set(lpfc_init_vfi_vfi, init_vfi, + vport->phba->sli4_hba.vfi_ids[vport->vfi]); + bf_set(lpfc_init_vpi_vpi, init_vfi, + vport->phba->vpi_ids[vport->vpi]); + bf_set(lpfc_init_vfi_fcfi, init_vfi, + vport->phba->fcf.fcfi); } /** @@ -1964,9 +2057,10 @@ lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) reg_vfi = &mbox->u.mqe.un.reg_vfi; bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI); bf_set(lpfc_reg_vfi_vp, reg_vfi, 1); - bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_reg_vfi_vfi, reg_vfi, + vport->phba->sli4_hba.vfi_ids[vport->vfi]); bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi); - bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base); + bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->phba->vpi_ids[vport->vpi]); memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name)); reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]); reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]); @@ -1997,9 +2091,9 @@ lpfc_init_vpi(struct lpfc_hba *phba, struct lpfcMboxq *mbox, uint16_t vpi) memset(mbox, 0, sizeof(*mbox)); bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI); bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, - vpi + phba->vpi_base); + phba->vpi_ids[vpi]); bf_set(lpfc_init_vpi_vfi, &mbox->u.mqe.un.init_vpi, - phba->pport->vfi + phba->vfi_base); + phba->sli4_hba.vfi_ids[phba->pport->vfi]); } /** @@ -2019,7 +2113,7 @@ lpfc_unreg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) memset(mbox, 0, sizeof(*mbox)); bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI); bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, - vport->vfi + vport->phba->vfi_base); + vport->phba->sli4_hba.vfi_ids[vport->vfi]); } /** @@ -2131,12 +2225,14 @@ lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi) void lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) { + struct lpfc_hba *phba = ndlp->phba; struct lpfc_mbx_resume_rpi *resume_rpi; memset(mbox, 0, sizeof(*mbox)); resume_rpi = &mbox->u.mqe.un.resume_rpi; bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI); - bf_set(lpfc_resume_rpi_index, resume_rpi, ndlp->nlp_rpi); + bf_set(lpfc_resume_rpi_index, resume_rpi, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI); resume_rpi->event_tag = ndlp->phba->fc_eventTag; } diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index cbb48ee8b0bb..10d5b5e41499 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -62,7 +62,6 @@ int lpfc_mem_alloc(struct lpfc_hba *phba, int align) { struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool; - int longs; int i; if (phba->sli_rev == LPFC_SLI_REV4) @@ -138,17 +137,8 @@ lpfc_mem_alloc(struct lpfc_hba *phba, int align) phba->lpfc_hrb_pool = NULL; phba->lpfc_drb_pool = NULL; } - /* vpi zero is reserved for the physical port so add 1 to max */ - longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG; - phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL); - if (!phba->vpi_bmask) - goto fail_free_dbq_pool; return 0; - - fail_free_dbq_pool: - pci_pool_destroy(phba->lpfc_drb_pool); - phba->lpfc_drb_pool = NULL; fail_free_hrb_pool: pci_pool_destroy(phba->lpfc_hrb_pool); phba->lpfc_hrb_pool = NULL; @@ -191,9 +181,6 @@ lpfc_mem_free(struct lpfc_hba *phba) int i; struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool; - /* Free VPI bitmask memory */ - kfree(phba->vpi_bmask); - /* Free HBQ pools */ lpfc_sli_hbqbuf_free_all(phba); if (phba->lpfc_drb_pool) diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 0d92d4205ea6..2ddd02f7c603 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -350,11 +350,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb; - /* - * Need to unreg_login if we are already in one of these states and - * change to NPR state. This will block the port until after the ACC - * completes and the reg_login is issued and completed. - */ + /* no need to reg_login if we are already in one of these states */ switch (ndlp->nlp_state) { case NLP_STE_NPR_NODE: if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) @@ -363,9 +359,8 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, case NLP_STE_PRLI_ISSUE: case NLP_STE_UNMAPPED_NODE: case NLP_STE_MAPPED_NODE: - lpfc_unreg_rpi(vport, ndlp); - ndlp->nlp_prev_state = ndlp->nlp_state; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL); + return 1; } if ((vport->fc_flag & FC_PT2PT) && @@ -657,6 +652,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) lpfc_unreg_rpi(vport, ndlp); return 0; } + /** * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd. * @phba : Pointer to lpfc_hba structure. @@ -1399,8 +1395,11 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, if (mb->mbxStatus) { /* RegLogin failed */ lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, - "0246 RegLogin failed Data: x%x x%x x%x\n", - did, mb->mbxStatus, vport->port_state); + "0246 RegLogin failed Data: x%x x%x x%x x%x " + "x%x\n", + did, mb->mbxStatus, vport->port_state, + mb->un.varRegLogin.vpi, + mb->un.varRegLogin.rpi); /* * If RegLogin failed due to lack of HBA resources do not * retry discovery. @@ -1424,7 +1423,10 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, return ndlp->nlp_state; } - ndlp->nlp_rpi = mb->un.varWords[0]; + /* SLI4 ports have preallocated logical rpis. */ + if (vport->phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + ndlp->nlp_flag |= NLP_RPI_REGISTERED; /* Only if we are not a fabric nport do we issue PRLI */ @@ -2025,7 +2027,9 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport, MAILBOX_t *mb = &pmb->u.mb; if (!mb->mbxStatus) { - ndlp->nlp_rpi = mb->un.varWords[0]; + /* SLI4 ports have preallocated logical rpis. */ + if (vport->phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; } else { if (ndlp->nlp_flag & NLP_NODEV_REMOVE) { diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 84e4481b2406..3ccc97496ebf 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -743,7 +743,14 @@ lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) if (bcnt == 0) continue; /* Now, post the SCSI buffer list sgls as a block */ - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + if (!phba->sli4_hba.extents_in_use) + status = lpfc_sli4_post_scsi_sgl_block(phba, + &sblist, + bcnt); + else + status = lpfc_sli4_post_scsi_sgl_blk_ext(phba, + &sblist, + bcnt); /* Reset SCSI buffer count for next round of posting */ bcnt = 0; while (!list_empty(&sblist)) { @@ -787,7 +794,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) dma_addr_t pdma_phys_fcp_cmd; dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; - uint16_t iotag, last_xritag = NO_XRI; + uint16_t iotag, last_xritag = NO_XRI, lxri = 0; int status = 0, index; int bcnt; int non_sequential_xri = 0; @@ -823,13 +830,15 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) break; } - psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba); - if (psb->cur_iocbq.sli4_xritag == NO_XRI) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data, psb->dma_handle); kfree(psb); break; } + psb->cur_iocbq.sli4_lxritag = lxri; + psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; if (last_xritag != NO_XRI && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) { non_sequential_xri = 1; @@ -861,6 +870,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 0); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd)); @@ -869,6 +879,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) /* Setup the physical region for the FCP RSP */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 1); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp)); @@ -914,7 +925,21 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) } } if (bcnt) { - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + if (!phba->sli4_hba.extents_in_use) + status = lpfc_sli4_post_scsi_sgl_block(phba, + &sblist, + bcnt); + else + status = lpfc_sli4_post_scsi_sgl_blk_ext(phba, + &sblist, + bcnt); + + if (status) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "3021 SCSI SGL post error %d\n", + status); + bcnt = 0; + } /* Reset SCSI buffer count for next round of posting */ while (!list_empty(&sblist)) { list_remove_head(&sblist, psb, struct lpfc_scsi_buf, @@ -2081,6 +2106,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) dma_len = sg_dma_len(sgel); sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + sgl->word2 = le32_to_cpu(sgl->word2); if ((num_bde + 1) == nseg) bf_set(lpfc_sli4_sge_last, sgl, 1); else @@ -2794,6 +2820,9 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, * of the scsi_cmnd request_buffer */ piocbq->iocb.ulpContext = pnode->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + piocbq->iocb.ulpContext = + phba->sli4_hba.rpi_ids[pnode->nlp_rpi]; if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE) piocbq->iocb.ulpFCP2Rcvy = 1; else @@ -2807,7 +2836,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit + * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2851,6 +2880,10 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); piocb->ulpCommand = CMD_FCP_ICMND64_CR; piocb->ulpContext = ndlp->nlp_rpi; + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + piocb->ulpContext = + vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + } if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { piocb->ulpFCP2Rcvy = 1; } @@ -3405,9 +3438,10 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0702 Issue %s to TGT %d LUN %d " - "rpi x%x nlp_flag x%x\n", + "rpi x%x nlp_flag x%x Data: x%x x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, - pnode->nlp_rpi, pnode->nlp_flag); + pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag, + iocbq->iocb_flag); status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, iocbq, iocbqrsp, lpfc_cmd->timeout); @@ -3419,10 +3453,12 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, ret = FAILED; lpfc_cmd->status = IOSTAT_DRIVER_REJECT; lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n", + "0727 TMF %s to TGT %d LUN %d failed (%d, %d) " + "iocb_flag x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, iocbqrsp->iocb.ulpStatus, - iocbqrsp->iocb.un.ulpWord[4]); + iocbqrsp->iocb.un.ulpWord[4], + iocbq->iocb_flag); } else if (status == IOCB_BUSY) ret = FAILED; else diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fd5835e1c039..98999bbd8cbf 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -65,6 +65,9 @@ static struct lpfc_iocbq *lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *, struct lpfc_iocbq *); static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *, struct hbq_dmabuf *); +static int lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *, struct lpfc_queue *, + struct lpfc_cqe *); + static IOCB_t * lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq) { @@ -456,7 +459,6 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) struct lpfc_iocbq * iocbq = NULL; list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list); - if (iocbq) phba->iocb_cnt++; if (phba->iocb_cnt > phba->iocb_max) @@ -479,13 +481,10 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) static struct lpfc_sglq * __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag) { - uint16_t adj_xri; struct lpfc_sglq *sglq; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri) - return NULL; - sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri]; - phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL; + + sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag]; + phba->sli4_hba.lpfc_sglq_active_list[xritag] = NULL; return sglq; } @@ -504,12 +503,9 @@ __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag) struct lpfc_sglq * __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag) { - uint16_t adj_xri; struct lpfc_sglq *sglq; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri) - return NULL; - sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri]; + + sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag]; return sglq; } @@ -532,7 +528,6 @@ static int __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, uint16_t xritag, uint16_t rxid, uint16_t send_rrq) { - uint16_t adj_xri; struct lpfc_node_rrq *rrq; int empty; uint32_t did = 0; @@ -553,21 +548,19 @@ __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, /* * set the active bit even if there is no mem available. */ - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (NLP_CHK_FREE_REQ(ndlp)) goto out; if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING)) goto out; - if (test_and_set_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) + if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap)) goto out; rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL); if (rrq) { rrq->send_rrq = send_rrq; - rrq->xritag = xritag; + rrq->xritag = phba->sli4_hba.xri_ids[xritag]; rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1); rrq->ndlp = ndlp; rrq->nlp_DID = ndlp->nlp_DID; @@ -603,7 +596,6 @@ lpfc_clr_rrq_active(struct lpfc_hba *phba, uint16_t xritag, struct lpfc_node_rrq *rrq) { - uint16_t adj_xri; struct lpfc_nodelist *ndlp = NULL; if ((rrq->vport) && NLP_CHK_NODE_ACT(rrq->ndlp)) @@ -619,8 +611,7 @@ lpfc_clr_rrq_active(struct lpfc_hba *phba, if (!ndlp) goto out; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (test_and_clear_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) { + if (test_and_clear_bit(xritag, ndlp->active_rrqs.xri_bitmap)) { rrq->send_rrq = 0; rrq->xritag = 0; rrq->rrq_stop_time = 0; @@ -796,12 +787,9 @@ int lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, uint16_t xritag) { - uint16_t adj_xri; - - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; if (!ndlp) return 0; - if (test_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) + if (test_bit(xritag, ndlp->active_rrqs.xri_bitmap)) return 1; else return 0; @@ -841,7 +829,7 @@ lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, * @piocb: Pointer to the iocbq. * * This function is called with hbalock held. This function - * Gets a new driver sglq object from the sglq list. If the + * gets a new driver sglq object from the sglq list. If the * list is not empty then it is successful, it returns pointer to the newly * allocated sglq object else it returns NULL. **/ @@ -851,7 +839,6 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list; struct lpfc_sglq *sglq = NULL; struct lpfc_sglq *start_sglq = NULL; - uint16_t adj_xri; struct lpfc_scsi_buf *lpfc_cmd; struct lpfc_nodelist *ndlp; int found = 0; @@ -870,8 +857,6 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) while (!found) { if (!sglq) return NULL; - adj_xri = sglq->sli4_xritag - - phba->sli4_hba.max_cfg_param.xri_base; if (lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) { /* This xri has an rrq outstanding for this DID. * put it back in the list and get another xri. @@ -888,7 +873,7 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) } sglq->ndlp = ndlp; found = 1; - phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq; + phba->sli4_hba.lpfc_sglq_active_list[sglq->sli4_lxritag] = sglq; sglq->state = SGL_ALLOCATED; } return sglq; @@ -944,7 +929,8 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) if (iocbq->sli4_xritag == NO_XRI) sglq = NULL; else - sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag); + sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_lxritag); + if (sglq) { if ((iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) && (sglq->state != SGL_XRI_ABORTED)) { @@ -971,6 +957,7 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) * Clean all volatile data fields, preserve iotag and node struct. */ memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean); + iocbq->sli4_lxritag = NO_XRI; iocbq->sli4_xritag = NO_XRI; list_add_tail(&iocbq->list, &phba->lpfc_iocb_list); } @@ -2113,7 +2100,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 && !pmb->u.mb.mbxStatus) { rpi = pmb->u.mb.un.varWords[0]; - vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base; + vpi = pmb->u.mb.un.varRegLogin.vpi; lpfc_unreg_login(phba, vpi, rpi, pmb); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); @@ -3881,8 +3868,10 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) list_del_init(&phba->sli4_hba.els_cq->list); for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++) list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list); - for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++) + qindx = 0; + do list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list); + while (++qindx < phba->cfg_fcp_eq_count); spin_unlock_irq(&phba->hbalock); /* Now physically reset the device */ @@ -4318,6 +4307,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) continue; } else if (rc) break; + phba->link_state = LPFC_INIT_MBX_CMDS; lpfc_config_port(phba, pmb); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); @@ -4421,7 +4411,8 @@ int lpfc_sli_hba_setup(struct lpfc_hba *phba) { uint32_t rc; - int mode = 3; + int mode = 3, i; + int longs; switch (lpfc_sli_mode) { case 2: @@ -4491,6 +4482,35 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (rc) goto lpfc_sli_hba_setup_error; + /* Initialize VPIs. */ + if (phba->sli_rev == LPFC_SLI_REV3) { + /* + * The VPI bitmask and physical ID array are allocated + * and initialized once only - at driver load. A port + * reset doesn't need to reinitialize this memory. + */ + if ((phba->vpi_bmask == NULL) && (phba->vpi_ids == NULL)) { + longs = (phba->max_vpi + BITS_PER_LONG) / BITS_PER_LONG; + phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), + GFP_KERNEL); + if (!phba->vpi_bmask) { + rc = -ENOMEM; + goto lpfc_sli_hba_setup_error; + } + + phba->vpi_ids = kzalloc( + (phba->max_vpi+1) * sizeof(uint16_t), + GFP_KERNEL); + if (!phba->vpi_ids) { + kfree(phba->vpi_bmask); + rc = -ENOMEM; + goto lpfc_sli_hba_setup_error; + } + for (i = 0; i < phba->max_vpi; i++) + phba->vpi_ids[i] = i; + } + } + /* Init HBQs */ if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { rc = lpfc_sli_hbq_setup(phba); @@ -4677,9 +4697,11 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM); lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM); - for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) + fcp_eqidx = 0; + do lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx], LPFC_QUEUE_REARM); + while (++fcp_eqidx < phba->cfg_fcp_eq_count); lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM); for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx], @@ -4687,6 +4709,803 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) } /** + * lpfc_sli4_get_avail_extnt_rsrc - Get available resource extent count. + * @phba: Pointer to HBA context object. + * @type: The resource extent type. + * + * This function allocates all SLI4 resource identifiers. + **/ +static int +lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type, + uint16_t *extnt_count, uint16_t *extnt_size) +{ + int rc = 0; + uint32_t length; + uint32_t mbox_tmo; + struct lpfc_mbx_get_rsrc_extent_info *rsrc_info; + LPFC_MBOXQ_t *mbox; + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + /* Find out how many extents are available for this resource type */ + length = (sizeof(struct lpfc_mbx_get_rsrc_extent_info) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO, + length, LPFC_SLI4_MBX_EMBED); + + /* Send an extents count of 0 - the GET doesn't use it. */ + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type, + LPFC_SLI4_MBX_EMBED); + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + rsrc_info = &mbox->u.mqe.un.rsrc_extent_info; + if (bf_get(lpfc_mbox_hdr_status, + &rsrc_info->header.cfg_shdr.response)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "2930 Failed to get resource extents " + "Status 0x%x Add'l Status 0x%x\n", + bf_get(lpfc_mbox_hdr_status, + &rsrc_info->header.cfg_shdr.response), + bf_get(lpfc_mbox_hdr_add_status, + &rsrc_info->header.cfg_shdr.response)); + rc = -EIO; + goto err_exit; + } + + *extnt_count = bf_get(lpfc_mbx_get_rsrc_extent_info_cnt, + &rsrc_info->u.rsp); + *extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size, + &rsrc_info->u.rsp); + err_exit: + mempool_free(mbox, phba->mbox_mem_pool); + return rc; +} + +/** + * lpfc_sli4_chk_avail_extnt_rsrc - Check for available SLI4 resource extents. + * @phba: Pointer to HBA context object. + * @type: The extent type to check. + * + * This function reads the current available extents from the port and checks + * if the extent count or extent size has changed since the last access. + * Callers use this routine post port reset to understand if there is a + * extent reprovisioning requirement. + * + * Returns: + * -Error: error indicates problem. + * 1: Extent count or size has changed. + * 0: No changes. + **/ +static int +lpfc_sli4_chk_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type) +{ + uint16_t curr_ext_cnt, rsrc_ext_cnt; + uint16_t size_diff, rsrc_ext_size; + int rc = 0; + struct lpfc_rsrc_blks *rsrc_entry; + struct list_head *rsrc_blk_list = NULL; + + size_diff = 0; + curr_ext_cnt = 0; + rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type, + &rsrc_ext_cnt, + &rsrc_ext_size); + if (unlikely(rc)) + return -EIO; + + switch (type) { + case LPFC_RSC_TYPE_FCOE_RPI: + rsrc_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VPI: + rsrc_blk_list = &phba->lpfc_vpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_XRI: + rsrc_blk_list = &phba->sli4_hba.lpfc_xri_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VFI: + rsrc_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list; + break; + default: + break; + } + + list_for_each_entry(rsrc_entry, rsrc_blk_list, list) { + curr_ext_cnt++; + if (rsrc_entry->rsrc_size != rsrc_ext_size) + size_diff++; + } + + if (curr_ext_cnt != rsrc_ext_cnt || size_diff != 0) + rc = 1; + + return rc; +} + +/** + * lpfc_sli4_cfg_post_extnts - + * @phba: Pointer to HBA context object. + * @extnt_cnt - number of available extents. + * @type - the extent type (rpi, xri, vfi, vpi). + * @emb - buffer to hold either MBX_EMBED or MBX_NEMBED operation. + * @mbox - pointer to the caller's allocated mailbox structure. + * + * This function executes the extents allocation request. It also + * takes care of the amount of memory needed to allocate or get the + * allocated extents. It is the caller's responsibility to evaluate + * the response. + * + * Returns: + * -Error: Error value describes the condition found. + * 0: if successful + **/ +static int +lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt, + uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox) +{ + int rc = 0; + uint32_t req_len; + uint32_t emb_len; + uint32_t alloc_len, mbox_tmo; + + /* Calculate the total requested length of the dma memory */ + req_len = *extnt_cnt * sizeof(uint16_t); + + /* + * Calculate the size of an embedded mailbox. The uint32_t + * accounts for extents-specific word. + */ + emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) - + sizeof(uint32_t); + + /* + * Presume the allocation and response will fit into an embedded + * mailbox. If not true, reconfigure to a non-embedded mailbox. + */ + *emb = LPFC_SLI4_MBX_EMBED; + if (req_len > emb_len) { + req_len = *extnt_cnt * sizeof(uint16_t) + + sizeof(union lpfc_sli4_cfg_shdr) + + sizeof(uint32_t); + *emb = LPFC_SLI4_MBX_NEMBED; + } + + alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT, + req_len, *emb); + if (alloc_len < req_len) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "9000 Allocated DMA memory size (x%x) is " + "less than the requested DMA memory " + "size (x%x)\n", alloc_len, req_len); + return -ENOMEM; + } + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, *extnt_cnt, type, *emb); + if (unlikely(rc)) + return -EIO; + + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + + if (unlikely(rc)) + rc = -EIO; + return rc; +} + +/** + * lpfc_sli4_alloc_extent - Allocate an SLI4 resource extent. + * @phba: Pointer to HBA context object. + * @type: The resource extent type to allocate. + * + * This function allocates the number of elements for the specified + * resource type. + **/ +static int +lpfc_sli4_alloc_extent(struct lpfc_hba *phba, uint16_t type) +{ + bool emb = false; + uint16_t rsrc_id_cnt, rsrc_cnt, rsrc_size; + uint16_t rsrc_id, rsrc_start, j, k; + uint16_t *ids; + int i, rc; + unsigned long longs; + unsigned long *bmask; + struct lpfc_rsrc_blks *rsrc_blks; + LPFC_MBOXQ_t *mbox; + uint32_t length; + struct lpfc_id_range *id_array = NULL; + void *virtaddr = NULL; + struct lpfc_mbx_nembed_rsrc_extent *n_rsrc; + struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext; + struct list_head *ext_blk_list; + + rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type, + &rsrc_cnt, + &rsrc_size); + if (unlikely(rc)) + return -EIO; + + if ((rsrc_cnt == 0) || (rsrc_size == 0)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "3009 No available Resource Extents " + "for resource type 0x%x: Count: 0x%x, " + "Size 0x%x\n", type, rsrc_cnt, + rsrc_size); + return -ENOMEM; + } + + lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT, + "2903 Available Resource Extents " + "for resource type 0x%x: Count: 0x%x, " + "Size 0x%x\n", type, rsrc_cnt, + rsrc_size); + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + rc = lpfc_sli4_cfg_post_extnts(phba, &rsrc_cnt, type, &emb, mbox); + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + /* + * Figure out where the response is located. Then get local pointers + * to the response data. The port does not guarantee to respond to + * all extents counts request so update the local variable with the + * allocated count from the port. + */ + if (emb == LPFC_SLI4_MBX_EMBED) { + rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents; + id_array = &rsrc_ext->u.rsp.id[0]; + rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp); + } else { + virtaddr = mbox->sge_array->addr[0]; + n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr; + rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc); + id_array = &n_rsrc->id; + } + + longs = ((rsrc_cnt * rsrc_size) + BITS_PER_LONG - 1) / BITS_PER_LONG; + rsrc_id_cnt = rsrc_cnt * rsrc_size; + + /* + * Based on the resource size and count, correct the base and max + * resource values. + */ + length = sizeof(struct lpfc_rsrc_blks); + switch (type) { + case LPFC_RSC_TYPE_FCOE_RPI: + phba->sli4_hba.rpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.rpi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_ids)) { + kfree(phba->sli4_hba.rpi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* + * The next_rpi was initialized with the maximum available + * count but the port may allocate a smaller number. Catch + * that case and update the next_rpi. + */ + phba->sli4_hba.next_rpi = rsrc_id_cnt; + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.rpi_bmask; + ids = phba->sli4_hba.rpi_ids; + ext_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VPI: + phba->vpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->vpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->vpi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->vpi_ids)) { + kfree(phba->vpi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->vpi_bmask; + ids = phba->vpi_ids; + ext_blk_list = &phba->lpfc_vpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_XRI: + phba->sli4_hba.xri_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.xri_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_ids)) { + kfree(phba->sli4_hba.xri_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.xri_bmask; + ids = phba->sli4_hba.xri_ids; + ext_blk_list = &phba->sli4_hba.lpfc_xri_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VFI: + phba->sli4_hba.vfi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.vfi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_ids)) { + kfree(phba->sli4_hba.vfi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.vfi_bmask; + ids = phba->sli4_hba.vfi_ids; + ext_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list; + break; + default: + /* Unsupported Opcode. Fail call. */ + id_array = NULL; + bmask = NULL; + ids = NULL; + ext_blk_list = NULL; + goto err_exit; + } + + /* + * Complete initializing the extent configuration with the + * allocated ids assigned to this function. The bitmask serves + * as an index into the array and manages the available ids. The + * array just stores the ids communicated to the port via the wqes. + */ + for (i = 0, j = 0, k = 0; i < rsrc_cnt; i++) { + if ((i % 2) == 0) + rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_0, + &id_array[k]); + else + rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_1, + &id_array[k]); + + rsrc_blks = kzalloc(length, GFP_KERNEL); + if (unlikely(!rsrc_blks)) { + rc = -ENOMEM; + kfree(bmask); + kfree(ids); + goto err_exit; + } + rsrc_blks->rsrc_start = rsrc_id; + rsrc_blks->rsrc_size = rsrc_size; + list_add_tail(&rsrc_blks->list, ext_blk_list); + rsrc_start = rsrc_id; + if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0)) + phba->sli4_hba.scsi_xri_start = rsrc_start + + lpfc_sli4_get_els_iocb_cnt(phba); + + while (rsrc_id < (rsrc_start + rsrc_size)) { + ids[j] = rsrc_id; + rsrc_id++; + j++; + } + /* Entire word processed. Get next word.*/ + if ((i % 2) == 1) + k++; + } + err_exit: + lpfc_sli4_mbox_cmd_free(phba, mbox); + return rc; +} + +/** + * lpfc_sli4_dealloc_extent - Deallocate an SLI4 resource extent. + * @phba: Pointer to HBA context object. + * @type: the extent's type. + * + * This function deallocates all extents of a particular resource type. + * SLI4 does not allow for deallocating a particular extent range. It + * is the caller's responsibility to release all kernel memory resources. + **/ +static int +lpfc_sli4_dealloc_extent(struct lpfc_hba *phba, uint16_t type) +{ + int rc; + uint32_t length, mbox_tmo = 0; + LPFC_MBOXQ_t *mbox; + struct lpfc_mbx_dealloc_rsrc_extents *dealloc_rsrc; + struct lpfc_rsrc_blks *rsrc_blk, *rsrc_blk_next; + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + /* + * This function sends an embedded mailbox because it only sends the + * the resource type. All extents of this type are released by the + * port. + */ + length = (sizeof(struct lpfc_mbx_dealloc_rsrc_extents) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT, + length, LPFC_SLI4_MBX_EMBED); + + /* Send an extents count of 0 - the dealloc doesn't use it. */ + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type, + LPFC_SLI4_MBX_EMBED); + if (unlikely(rc)) { + rc = -EIO; + goto out_free_mbox; + } + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + if (unlikely(rc)) { + rc = -EIO; + goto out_free_mbox; + } + + dealloc_rsrc = &mbox->u.mqe.un.dealloc_rsrc_extents; + if (bf_get(lpfc_mbox_hdr_status, + &dealloc_rsrc->header.cfg_shdr.response)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "2919 Failed to release resource extents " + "for type %d - Status 0x%x Add'l Status 0x%x. " + "Resource memory not released.\n", + type, + bf_get(lpfc_mbox_hdr_status, + &dealloc_rsrc->header.cfg_shdr.response), + bf_get(lpfc_mbox_hdr_add_status, + &dealloc_rsrc->header.cfg_shdr.response)); + rc = -EIO; + goto out_free_mbox; + } + + /* Release kernel memory resources for the specific type. */ + switch (type) { + case LPFC_RSC_TYPE_FCOE_VPI: + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->lpfc_vpi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_XRI: + kfree(phba->sli4_hba.xri_bmask); + kfree(phba->sli4_hba.xri_ids); + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_xri_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_VFI: + kfree(phba->sli4_hba.vfi_bmask); + kfree(phba->sli4_hba.vfi_ids); + bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_vfi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_RPI: + /* RPI bitmask and physical id array are cleaned up earlier. */ + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_rpi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + default: + break; + } + + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + + out_free_mbox: + mempool_free(mbox, phba->mbox_mem_pool); + return rc; +} + +/** + * lpfc_sli4_alloc_resource_identifiers - Allocate all SLI4 resource extents. + * @phba: Pointer to HBA context object. + * + * This function allocates all SLI4 resource identifiers. + **/ +int +lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) +{ + int i, rc, error = 0; + uint16_t count, base; + unsigned long longs; + + if (phba->sli4_hba.extents_in_use) { + /* + * The port supports resource extents. The XRI, VPI, VFI, RPI + * resource extent count must be read and allocated before + * provisioning the resource id arrays. + */ + if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) == + LPFC_IDX_RSRC_RDY) { + /* + * Extent-based resources are set - the driver could + * be in a port reset. Figure out if any corrective + * actions need to be taken. + */ + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_VFI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_VPI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_XRI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_RPI); + if (rc != 0) + error++; + + /* + * It's possible that the number of resources + * provided to this port instance changed between + * resets. Detect this condition and reallocate + * resources. Otherwise, there is no action. + */ + if (error) { + lpfc_printf_log(phba, KERN_INFO, + LOG_MBOX | LOG_INIT, + "2931 Detected extent resource " + "change. Reallocating all " + "extents.\n"); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_VFI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_VPI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_XRI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_RPI); + } else + return 0; + } + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI); + if (unlikely(rc)) + goto err_exit; + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_IDX_RSRC_RDY); + return rc; + } else { + /* + * The port does not support resource extents. The XRI, VPI, + * VFI, RPI resource ids were determined from READ_CONFIG. + * Just allocate the bitmasks and provision the resource id + * arrays. If a port reset is active, the resources don't + * need any action - just exit. + */ + if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) == + LPFC_IDX_RSRC_RDY) + return 0; + + /* RPIs. */ + count = phba->sli4_hba.max_cfg_param.max_rpi; + base = phba->sli4_hba.max_cfg_param.rpi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.rpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.rpi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_ids)) { + rc = -ENOMEM; + goto free_rpi_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.rpi_ids[i] = base + i; + + /* VPIs. */ + count = phba->sli4_hba.max_cfg_param.max_vpi; + base = phba->sli4_hba.max_cfg_param.vpi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->vpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->vpi_bmask)) { + rc = -ENOMEM; + goto free_rpi_ids; + } + phba->vpi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->vpi_ids)) { + rc = -ENOMEM; + goto free_vpi_bmask; + } + + for (i = 0; i < count; i++) + phba->vpi_ids[i] = base + i; + + /* XRIs. */ + count = phba->sli4_hba.max_cfg_param.max_xri; + base = phba->sli4_hba.max_cfg_param.xri_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.xri_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_bmask)) { + rc = -ENOMEM; + goto free_vpi_ids; + } + phba->sli4_hba.xri_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_ids)) { + rc = -ENOMEM; + goto free_xri_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.xri_ids[i] = base + i; + + /* VFIs. */ + count = phba->sli4_hba.max_cfg_param.max_vfi; + base = phba->sli4_hba.max_cfg_param.vfi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.vfi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_bmask)) { + rc = -ENOMEM; + goto free_xri_ids; + } + phba->sli4_hba.vfi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_ids)) { + rc = -ENOMEM; + goto free_vfi_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.vfi_ids[i] = base + i; + + /* + * Mark all resources ready. An HBA reset doesn't need + * to reset the initialization. + */ + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_IDX_RSRC_RDY); + return 0; + } + + free_vfi_bmask: + kfree(phba->sli4_hba.vfi_bmask); + free_xri_ids: + kfree(phba->sli4_hba.xri_ids); + free_xri_bmask: + kfree(phba->sli4_hba.xri_bmask); + free_vpi_ids: + kfree(phba->vpi_ids); + free_vpi_bmask: + kfree(phba->vpi_bmask); + free_rpi_ids: + kfree(phba->sli4_hba.rpi_ids); + free_rpi_bmask: + kfree(phba->sli4_hba.rpi_bmask); + err_exit: + return rc; +} + +/** + * lpfc_sli4_dealloc_resource_identifiers - Deallocate all SLI4 resource extents. + * @phba: Pointer to HBA context object. + * + * This function allocates the number of elements for the specified + * resource type. + **/ +int +lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *phba) +{ + if (phba->sli4_hba.extents_in_use) { + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI); + } else { + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + kfree(phba->sli4_hba.xri_bmask); + kfree(phba->sli4_hba.xri_ids); + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + kfree(phba->sli4_hba.vfi_bmask); + kfree(phba->sli4_hba.vfi_ids); + bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + } + + return 0; +} + +/** * lpfc_sli4_hba_setup - SLI4 device intialization PCI function * @phba: Pointer to HBA context object. * @@ -4708,10 +5527,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) struct lpfc_vport *vport = phba->pport; struct lpfc_dmabuf *mp; - /* - * TODO: Why does this routine execute these task in a different - * order from probe? - */ /* Perform a PCI function reset to start from clean */ rc = lpfc_pci_function_reset(phba); if (unlikely(rc)) @@ -4740,7 +5555,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) * to read FCoE param config regions */ if (lpfc_sli4_read_fcoe_params(phba, mboxq)) - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_INIT, "2570 Failed to read FCoE parameters\n"); /* Issue READ_REV to collect vpd and FW information. */ @@ -4873,6 +5688,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED); spin_unlock_irq(&phba->hbalock); + /* + * Allocate all resources (xri,rpi,vpi,vfi) now. Subsequent + * calls depends on these resources to complete port setup. + */ + rc = lpfc_sli4_alloc_resource_identifiers(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2920 Failed to alloc Resource IDs " + "rc = x%x\n", rc); + goto out_free_mbox; + } + /* Read the port's service parameters. */ rc = lpfc_read_sparam(phba, mboxq, vport->vpi); if (rc) { @@ -4906,35 +5733,37 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) goto out_free_mbox; } - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof(struct lpfc_name)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof(struct lpfc_name)); + lpfc_update_vport_wwn(vport); /* Update the fc_host data structures with new wwn. */ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); /* Register SGL pool to the device using non-embedded mailbox command */ - rc = lpfc_sli4_post_sgl_list(phba); - if (unlikely(rc)) { - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "0582 Error %d during sgl post operation\n", - rc); - rc = -ENODEV; - goto out_free_mbox; + if (!phba->sli4_hba.extents_in_use) { + rc = lpfc_sli4_post_els_sgl_list(phba); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "0582 Error %d during els sgl post " + "operation\n", rc); + rc = -ENODEV; + goto out_free_mbox; + } + } else { + rc = lpfc_sli4_post_els_sgl_list_ext(phba); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2560 Error %d during els sgl post " + "operation\n", rc); + rc = -ENODEV; + goto out_free_mbox; + } } /* Register SCSI SGL pool to the device */ rc = lpfc_sli4_repost_scsi_sgl_list(phba); if (unlikely(rc)) { - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI, + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0383 Error %d during scsi sgl post " "operation\n", rc); /* Some Scsi buffers were moved to the abort scsi list */ @@ -5747,10 +6576,15 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe, sizeof(struct lpfc_mcqe)); mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe); - - /* Prefix the mailbox status with range x4000 to note SLI4 status. */ + /* + * When the CQE status indicates a failure and the mailbox status + * indicates success then copy the CQE status into the mailbox status + * (and prefix it with x4000). + */ if (mcqe_status != MB_CQE_STATUS_SUCCESS) { - bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status); + if (bf_get(lpfc_mqe_status, mb) == MBX_SUCCESS) + bf_set(lpfc_mqe_status, mb, + (LPFC_MBX_ERROR_RANGE | mcqe_status)); rc = MBXERR_ERROR; } else lpfc_sli4_swap_str(phba, mboxq); @@ -5819,7 +6653,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, else rc = -EIO; if (rc != MBX_SUCCESS) - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI, "(%d):2541 Mailbox command x%x " "(x%x) cannot issue Data: x%x x%x\n", mboxq->vport ? mboxq->vport->vpi : 0, @@ -6307,6 +7141,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, sgl->addr_hi = bpl->addrHigh; sgl->addr_lo = bpl->addrLow; + sgl->word2 = le32_to_cpu(sgl->word2); if ((i+1) == numBdes) bf_set(lpfc_sli4_sge_last, sgl, 1); else @@ -6343,6 +7178,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, cpu_to_le32(icmd->un.genreq64.bdl.addrHigh); sgl->addr_lo = cpu_to_le32(icmd->un.genreq64.bdl.addrLow); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 1); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = @@ -6474,7 +7310,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK) >> LPFC_FIP_ELS_ID_SHIFT); } - bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi); + bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id); bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1); bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ); @@ -6623,14 +7460,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, iocbq->iocb.ulpContext); if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l) bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com, - iocbq->vport->vpi + phba->vpi_base); + phba->vpi_ids[iocbq->vport->vpi]); bf_set(wqe_dbde, &wqe->xmit_els_rsp.wqe_com, 1); bf_set(wqe_iod, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_IOD_WRITE); bf_set(wqe_qosd, &wqe->xmit_els_rsp.wqe_com, 1); bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_LENLOC_WORD3); bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0); - bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi); + bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); command_type = OTHER_COMMAND; break; case CMD_CLOSE_XRI_CN: @@ -6729,6 +7567,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, return IOCB_ERROR; break; } + bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag); bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag); wqe->generic.wqe_com.abort_tag = abort_tag; @@ -6776,7 +7615,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, return IOCB_BUSY; } } else { - sglq = __lpfc_sli_get_sglq(phba, piocb); + sglq = __lpfc_sli_get_sglq(phba, piocb); if (!sglq) { if (!(flag & SLI_IOCB_RET_IOCB)) { __lpfc_sli_ringtx_put(phba, @@ -6789,11 +7628,11 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, } } } else if (piocb->iocb_flag & LPFC_IO_FCP) { - sglq = NULL; /* These IO's already have an XRI and - * a mapped sgl. - */ + /* These IO's already have an XRI and a mapped sgl. */ + sglq = NULL; } else { - /* This is a continuation of a commandi,(CX) so this + /* + * This is a continuation of a commandi,(CX) so this * sglq is on the active list */ sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag); @@ -6802,8 +7641,8 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, } if (sglq) { + piocb->sli4_lxritag = sglq->sli4_lxritag; piocb->sli4_xritag = sglq->sli4_xritag; - if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocb, sglq)) return IOCB_ERROR; } @@ -9799,7 +10638,12 @@ lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe) break; case LPFC_WCQ: while ((cqe = lpfc_sli4_cq_get(cq))) { - workposted |= lpfc_sli4_sp_handle_cqe(phba, cq, cqe); + if (cq->subtype == LPFC_FCP) + workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, + cqe); + else + workposted |= lpfc_sli4_sp_handle_cqe(phba, cq, + cqe); if (!(++ecount % LPFC_GET_QE_REL_INT)) lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM); } @@ -11446,6 +12290,7 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox; int rc; uint32_t shdr_status, shdr_add_status; + uint32_t mbox_tmo; union lpfc_sli4_cfg_shdr *shdr; if (xritag == NO_XRI) { @@ -11479,8 +12324,10 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, cpu_to_le32(putPaddrHigh(pdma_phys_addr1)); if (!phba->sli4_hba.intr_enable) rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); - else - rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } /* The IOCTL status is embedded in the mailbox subheader. */ shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr; shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); @@ -11498,6 +12345,76 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, } /** + * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to post rpi header templates to the + * port for those SLI4 ports that do not support extents. This routine + * posts a PAGE_SIZE memory region to the port to hold up to + * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine + * and should be called only when interrupts are disabled. + * + * Return codes + * 0 - successful + * -ERROR - otherwise. + */ +uint16_t +lpfc_sli4_alloc_xri(struct lpfc_hba *phba) +{ + unsigned long xri; + + /* + * Fetch the next logical xri. Because this index is logical, + * the driver starts at 0 each time. + */ + spin_lock_irq(&phba->hbalock); + xri = find_next_zero_bit(phba->sli4_hba.xri_bmask, + phba->sli4_hba.max_cfg_param.max_xri, 0); + if (xri >= phba->sli4_hba.max_cfg_param.max_xri) { + spin_unlock_irq(&phba->hbalock); + return NO_XRI; + } else { + set_bit(xri, phba->sli4_hba.xri_bmask); + phba->sli4_hba.max_cfg_param.xri_used++; + phba->sli4_hba.xri_count++; + } + + spin_unlock_irq(&phba->hbalock); + return xri; +} + +/** + * lpfc_sli4_free_xri - Release an xri for reuse. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release an xri to the pool of + * available rpis maintained by the driver. + **/ +void +__lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri) +{ + if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) { + phba->sli4_hba.xri_count--; + phba->sli4_hba.max_cfg_param.xri_used--; + } +} + +/** + * lpfc_sli4_free_xri - Release an xri for reuse. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release an xri to the pool of + * available rpis maintained by the driver. + **/ +void +lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri) +{ + spin_lock_irq(&phba->hbalock); + __lpfc_sli4_free_xri(phba, xri); + spin_unlock_irq(&phba->hbalock); +} + +/** * lpfc_sli4_next_xritag - Get an xritag for the io * @phba: Pointer to HBA context object. * @@ -11510,30 +12427,23 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *phba) { - uint16_t xritag; + uint16_t xri_index; - spin_lock_irq(&phba->hbalock); - xritag = phba->sli4_hba.next_xri; - if ((xritag != (uint16_t) -1) && xritag < - (phba->sli4_hba.max_cfg_param.max_xri - + phba->sli4_hba.max_cfg_param.xri_base)) { - phba->sli4_hba.next_xri++; - phba->sli4_hba.max_cfg_param.xri_used++; - spin_unlock_irq(&phba->hbalock); - return xritag; - } - spin_unlock_irq(&phba->hbalock); - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + xri_index = lpfc_sli4_alloc_xri(phba); + if (xri_index != NO_XRI) + return xri_index; + + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2004 Failed to allocate XRI.last XRITAG is %d" " Max XRI is %d, Used XRI is %d\n", - phba->sli4_hba.next_xri, + xri_index, phba->sli4_hba.max_cfg_param.max_xri, phba->sli4_hba.max_cfg_param.xri_used); - return -1; + return NO_XRI; } /** - * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware. + * lpfc_sli4_post_els_sgl_list - post a block of ELS sgls to the port. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to post a block of driver's sgl pages to the @@ -11542,7 +12452,7 @@ lpfc_sli4_next_xritag(struct lpfc_hba *phba) * stopped. **/ int -lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) +lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba) { struct lpfc_sglq *sglq_entry; struct lpfc_mbx_post_uembed_sgl_page1 *sgl; @@ -11551,7 +12461,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) LPFC_MBOXQ_t *mbox; uint32_t reqlen, alloclen, pg_pairs; uint32_t mbox_tmo; - uint16_t xritag_start = 0; + uint16_t xritag_start = 0, lxri = 0; int els_xri_cnt, rc = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; @@ -11568,11 +12478,8 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) return -ENOMEM; } mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2560 Failed to allocate mbox cmd memory\n"); + if (!mbox) return -ENOMEM; - } /* Allocate DMA memory and set up the non-embedded mailbox command */ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, @@ -11587,15 +12494,30 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) lpfc_sli4_mbox_cmd_free(phba, mbox); return -ENOMEM; } - /* Get the first SGE entry from the non-embedded DMA memory */ - viraddr = mbox->sge_array->addr[0]; - /* Set up the SGL pages in the non-embedded DMA pages */ + viraddr = mbox->sge_array->addr[0]; sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; sgl_pg_pairs = &sgl->sgl_pg_pairs; for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) { sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs]; + + /* + * Assign the sglq a physical xri only if the driver has not + * initialized those resources. A port reset only needs + * the sglq's posted. + */ + if (bf_get(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags) != + LPFC_XRI_RSRC_RDY) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + sglq_entry->sli4_lxritag = lxri; + sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; + } + /* Set up the sge entry */ sgl_pg_pairs->sgl_pg0_addr_lo = cpu_to_le32(putPaddrLow(sglq_entry->phys)); @@ -11605,16 +12527,17 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) cpu_to_le32(putPaddrLow(0)); sgl_pg_pairs->sgl_pg1_addr_hi = cpu_to_le32(putPaddrHigh(0)); + /* Keep the first xritag on the list */ if (pg_pairs == 0) xritag_start = sglq_entry->sli4_xritag; sgl_pg_pairs++; } + + /* Complete initialization and perform endian conversion. */ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start); bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt); - /* Perform endian conversion if necessary */ sgl->word0 = cpu_to_le32(sgl->word0); - if (!phba->sli4_hba.intr_enable) rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); else { @@ -11633,6 +12556,181 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) shdr_status, shdr_add_status, rc); rc = -ENXIO; } + + if (rc == 0) + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_XRI_RSRC_RDY); + return rc; +} + +/** + * lpfc_sli4_post_els_sgl_list_ext - post a block of ELS sgls to the port. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to post a block of driver's sgl pages to the + * HBA using non-embedded mailbox command. No Lock is held. This routine + * is only called when the driver is loading and after all IO has been + * stopped. + **/ +int +lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) +{ + struct lpfc_sglq *sglq_entry; + struct lpfc_mbx_post_uembed_sgl_page1 *sgl; + struct sgl_page_pairs *sgl_pg_pairs; + void *viraddr; + LPFC_MBOXQ_t *mbox; + uint32_t reqlen, alloclen, index; + uint32_t mbox_tmo; + uint16_t rsrc_start, rsrc_size, els_xri_cnt; + uint16_t xritag_start = 0, lxri = 0; + struct lpfc_rsrc_blks *rsrc_blk; + int cnt, ttl_cnt, rc = 0; + int loop_cnt; + uint32_t shdr_status, shdr_add_status; + union lpfc_sli4_cfg_shdr *shdr; + + /* The number of sgls to be posted */ + els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); + + reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + if (reqlen > SLI4_PAGE_SIZE) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2989 Block sgl registration required DMA " + "size (%d) great than a page\n", reqlen); + return -ENOMEM; + } + + cnt = 0; + ttl_cnt = 0; + list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, + list) { + rsrc_start = rsrc_blk->rsrc_start; + rsrc_size = rsrc_blk->rsrc_size; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3014 Working ELS Extent start %d, cnt %d\n", + rsrc_start, rsrc_size); + + loop_cnt = min(els_xri_cnt, rsrc_size); + if (ttl_cnt + loop_cnt >= els_xri_cnt) { + loop_cnt = els_xri_cnt - ttl_cnt; + ttl_cnt = els_xri_cnt; + } + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + /* + * Allocate DMA memory and set up the non-embedded mailbox + * command. + */ + alloclen = lpfc_sli4_config(phba, mbox, + LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, + reqlen, LPFC_SLI4_MBX_NEMBED); + if (alloclen < reqlen) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2987 Allocated DMA memory size (%d) " + "is less than the requested DMA memory " + "size (%d)\n", alloclen, reqlen); + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + + /* Set up the SGL pages in the non-embedded DMA pages */ + viraddr = mbox->sge_array->addr[0]; + sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; + sgl_pg_pairs = &sgl->sgl_pg_pairs; + + /* + * The starting resource may not begin at zero. Control + * the loop variants via the block resource parameters, + * but handle the sge pointers with a zero-based index + * that doesn't get reset per loop pass. + */ + for (index = rsrc_start; + index < rsrc_start + loop_cnt; + index++) { + sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[cnt]; + + /* + * Assign the sglq a physical xri only if the driver + * has not initialized those resources. A port reset + * only needs the sglq's posted. + */ + if (bf_get(lpfc_xri_rsrc_rdy, + &phba->sli4_hba.sli4_flags) != + LPFC_XRI_RSRC_RDY) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { + lpfc_sli4_mbox_cmd_free(phba, mbox); + rc = -ENOMEM; + goto err_exit; + } + sglq_entry->sli4_lxritag = lxri; + sglq_entry->sli4_xritag = + phba->sli4_hba.xri_ids[lxri]; + } + + /* Set up the sge entry */ + sgl_pg_pairs->sgl_pg0_addr_lo = + cpu_to_le32(putPaddrLow(sglq_entry->phys)); + sgl_pg_pairs->sgl_pg0_addr_hi = + cpu_to_le32(putPaddrHigh(sglq_entry->phys)); + sgl_pg_pairs->sgl_pg1_addr_lo = + cpu_to_le32(putPaddrLow(0)); + sgl_pg_pairs->sgl_pg1_addr_hi = + cpu_to_le32(putPaddrHigh(0)); + + /* Track the starting physical XRI for the mailbox. */ + if (index == rsrc_start) + xritag_start = sglq_entry->sli4_xritag; + sgl_pg_pairs++; + cnt++; + } + + /* Complete initialization and perform endian conversion. */ + rsrc_blk->rsrc_used += loop_cnt; + bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start); + bf_set(lpfc_post_sgl_pages_xricnt, sgl, loop_cnt); + sgl->word0 = cpu_to_le32(sgl->word0); + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3015 Post ELS Extent SGL, start %d, " + "cnt %d, used %d\n", + xritag_start, loop_cnt, rsrc_blk->rsrc_used); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, + &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (rc != MBX_TIMEOUT) + lpfc_sli4_mbox_cmd_free(phba, mbox); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "2988 POST_SGL_BLOCK mailbox " + "command failed status x%x " + "add_status x%x mbx status x%x\n", + shdr_status, shdr_add_status, rc); + rc = -ENXIO; + goto err_exit; + } + if (ttl_cnt >= els_xri_cnt) + break; + } + + err_exit: + if (rc == 0) + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_XRI_RSRC_RDY); return rc; } @@ -11693,6 +12791,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist, lpfc_sli4_mbox_cmd_free(phba, mbox); return -ENOMEM; } + /* Get the first SGE entry from the non-embedded DMA memory */ viraddr = mbox->sge_array->addr[0]; @@ -11748,6 +12847,169 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist, } /** + * lpfc_sli4_post_scsi_sgl_blk_ext - post a block of scsi sgls to the port. + * @phba: pointer to lpfc hba data structure. + * @sblist: pointer to scsi buffer list. + * @count: number of scsi buffers on the list. + * + * This routine is invoked to post a block of @count scsi sgl pages from a + * SCSI buffer list @sblist to the HBA using non-embedded mailbox command. + * No Lock is held. + * + **/ +int +lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist, + int cnt) +{ + struct lpfc_scsi_buf *psb = NULL; + struct lpfc_mbx_post_uembed_sgl_page1 *sgl; + struct sgl_page_pairs *sgl_pg_pairs; + void *viraddr; + LPFC_MBOXQ_t *mbox; + uint32_t reqlen, alloclen, pg_pairs; + uint32_t mbox_tmo; + uint16_t xri_start = 0, scsi_xri_start; + uint16_t rsrc_range; + int rc = 0, avail_cnt; + uint32_t shdr_status, shdr_add_status; + dma_addr_t pdma_phys_bpl1; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_rsrc_blks *rsrc_blk; + uint32_t xri_cnt = 0; + + /* Calculate the total requested length of the dma memory */ + reqlen = cnt * sizeof(struct sgl_page_pairs) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + if (reqlen > SLI4_PAGE_SIZE) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2932 Block sgl registration required DMA " + "size (%d) great than a page\n", reqlen); + return -ENOMEM; + } + + /* + * The use of extents requires the driver to post the sgl headers + * in multiple postings to meet the contiguous resource assignment. + */ + psb = list_prepare_entry(psb, sblist, list); + scsi_xri_start = phba->sli4_hba.scsi_xri_start; + list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, + list) { + rsrc_range = rsrc_blk->rsrc_start + rsrc_blk->rsrc_size; + if (rsrc_range < scsi_xri_start) + continue; + else if (rsrc_blk->rsrc_used >= rsrc_blk->rsrc_size) + continue; + else + avail_cnt = rsrc_blk->rsrc_size - rsrc_blk->rsrc_used; + + reqlen = (avail_cnt * sizeof(struct sgl_page_pairs)) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + /* + * Allocate DMA memory and set up the non-embedded mailbox + * command. The mbox is used to post an SGL page per loop + * but the DMA memory has a use-once semantic so the mailbox + * is used and freed per loop pass. + */ + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2933 Failed to allocate mbox cmd " + "memory\n"); + return -ENOMEM; + } + alloclen = lpfc_sli4_config(phba, mbox, + LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, + reqlen, + LPFC_SLI4_MBX_NEMBED); + if (alloclen < reqlen) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2934 Allocated DMA memory size (%d) " + "is less than the requested DMA memory " + "size (%d)\n", alloclen, reqlen); + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + + /* Get the first SGE entry from the non-embedded DMA memory */ + viraddr = mbox->sge_array->addr[0]; + + /* Set up the SGL pages in the non-embedded DMA pages */ + sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; + sgl_pg_pairs = &sgl->sgl_pg_pairs; + + /* pg_pairs tracks posted SGEs per loop iteration. */ + pg_pairs = 0; + list_for_each_entry_continue(psb, sblist, list) { + /* Set up the sge entry */ + sgl_pg_pairs->sgl_pg0_addr_lo = + cpu_to_le32(putPaddrLow(psb->dma_phys_bpl)); + sgl_pg_pairs->sgl_pg0_addr_hi = + cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl)); + if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) + pdma_phys_bpl1 = psb->dma_phys_bpl + + SGL_PAGE_SIZE; + else + pdma_phys_bpl1 = 0; + sgl_pg_pairs->sgl_pg1_addr_lo = + cpu_to_le32(putPaddrLow(pdma_phys_bpl1)); + sgl_pg_pairs->sgl_pg1_addr_hi = + cpu_to_le32(putPaddrHigh(pdma_phys_bpl1)); + /* Keep the first xri for this extent. */ + if (pg_pairs == 0) + xri_start = psb->cur_iocbq.sli4_xritag; + sgl_pg_pairs++; + pg_pairs++; + xri_cnt++; + + /* + * Track two exit conditions - the loop has constructed + * all of the caller's SGE pairs or all available + * resource IDs in this extent are consumed. + */ + if ((xri_cnt == cnt) || (pg_pairs >= avail_cnt)) + break; + } + rsrc_blk->rsrc_used += pg_pairs; + bf_set(lpfc_post_sgl_pages_xri, sgl, xri_start); + bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs); + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3016 Post SCSI Extent SGL, start %d, cnt %d " + "blk use %d\n", + xri_start, pg_pairs, rsrc_blk->rsrc_used); + /* Perform endian conversion if necessary */ + sgl->word0 = cpu_to_le32(sgl->word0); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (rc != MBX_TIMEOUT) + lpfc_sli4_mbox_cmd_free(phba, mbox); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "2935 POST_SGL_BLOCK mailbox command " + "failed status x%x add_status x%x " + "mbx status x%x\n", + shdr_status, shdr_add_status, rc); + return -ENXIO; + } + + /* Post only what is requested. */ + if (xri_cnt >= cnt) + break; + } + return rc; +} + +/** * lpfc_fc_frame_check - Check that this frame is a valid frame to handle * @phba: pointer to lpfc_hba struct that the frame was received on * @fc_hdr: A pointer to the FC Header data (In Big Endian Format) @@ -12137,6 +13399,28 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba, } /** + * lpfc_sli4_xri_inrange - check xri is in range of xris owned by driver. + * @phba: Pointer to HBA context object. + * @xri: xri id in transaction. + * + * This function validates the xri maps to the known range of XRIs allocated an + * used by the driver. + **/ +static uint16_t +lpfc_sli4_xri_inrange(struct lpfc_hba *phba, + uint16_t xri) +{ + int i; + + for (i = 0; i < phba->sli4_hba.max_cfg_param.max_xri; i++) { + if (xri == phba->sli4_hba.xri_ids[i]) + return i; + } + return NO_XRI; +} + + +/** * lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort * @phba: Pointer to HBA context object. * @fc_hdr: pointer to a FC frame header. @@ -12169,9 +13453,7 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, "SID:x%x\n", oxid, sid); return; } - if (rxid >= phba->sli4_hba.max_cfg_param.xri_base - && rxid <= (phba->sli4_hba.max_cfg_param.max_xri - + phba->sli4_hba.max_cfg_param.xri_base)) + if (lpfc_sli4_xri_inrange(phba, rxid)) lpfc_set_rrq_active(phba, ndlp, rxid, oxid, 0); /* Allocate buffer for rsp iocb */ @@ -12194,12 +13476,13 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, icmd->ulpBdeCount = 0; icmd->ulpLe = 1; icmd->ulpClass = CLASS3; - icmd->ulpContext = ndlp->nlp_rpi; + icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; ctiocb->context1 = ndlp; ctiocb->iocb_cmpl = NULL; ctiocb->vport = phba->pport; ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_rsp_cmpl; + ctiocb->sli4_lxritag = NO_XRI; ctiocb->sli4_xritag = NO_XRI; /* If the oxid maps to the FCP XRI range or if it is out of range, @@ -12380,8 +13663,8 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS; first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX; first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id); - first_iocbq->iocb.unsli3.rcvsli3.vpi = - vport->vpi + vport->phba->vpi_base; + /* iocbq is prepped for internal consumption. Logical vpi. */ + first_iocbq->iocb.unsli3.rcvsli3.vpi = vport->vpi; /* put the first buffer into the first IOCBq */ first_iocbq->context2 = &seq_dmabuf->dbuf; first_iocbq->context3 = NULL; @@ -12461,7 +13744,7 @@ lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport, &phba->sli.ring[LPFC_ELS_RING], iocbq, fc_hdr->fh_r_ctl, fc_hdr->fh_type)) - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2540 Ring %d handler: unexpected Rctl " "x%x Type x%x received\n", LPFC_ELS_RING, @@ -12558,9 +13841,24 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) { struct lpfc_rpi_hdr *rpi_page; uint32_t rc = 0; + uint16_t lrpi = 0; + + /* SLI4 ports that support extents do not require RPI headers. */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + goto exit; + if (phba->sli4_hba.extents_in_use) + return -EIO; - /* Post all rpi memory regions to the port. */ list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) { + /* + * Assign the rpi headers a physical rpi only if the driver + * has not initialized those resources. A port reset only + * needs the headers posted. + */ + if (bf_get(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags) != + LPFC_RPI_RSRC_RDY) + rpi_page->start_rpi = phba->sli4_hba.rpi_ids[lrpi]; + rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, @@ -12571,6 +13869,9 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) } } + exit: + bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_RPI_RSRC_RDY); return rc; } @@ -12594,10 +13895,15 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) LPFC_MBOXQ_t *mboxq; struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl; uint32_t rc = 0; - uint32_t mbox_tmo; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + /* SLI4 ports that support extents do not require RPI headers. */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + return rc; + if (phba->sli4_hba.extents_in_use) + return -EIO; + /* The port is notified of the header region via a mailbox command. */ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { @@ -12609,16 +13915,19 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) /* Post all rpi memory regions to the port. */ hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl; - mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE, LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE, sizeof(struct lpfc_mbx_post_hdr_tmpl) - sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED); - bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt, - hdr_tmpl, rpi_page->page_count); + + + /* Post the physical rpi to the port for this rpi header. */ bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl, rpi_page->start_rpi); + bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt, + hdr_tmpl, rpi_page->page_count); + hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys); hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys); rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); @@ -12653,22 +13962,21 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) int lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) { - int rpi; - uint16_t max_rpi, rpi_base, rpi_limit; - uint16_t rpi_remaining; + unsigned long rpi; + uint16_t max_rpi, rpi_limit; + uint16_t rpi_remaining, lrpi = 0; struct lpfc_rpi_hdr *rpi_hdr; max_rpi = phba->sli4_hba.max_cfg_param.max_rpi; - rpi_base = phba->sli4_hba.max_cfg_param.rpi_base; rpi_limit = phba->sli4_hba.next_rpi; /* - * The valid rpi range is not guaranteed to be zero-based. Start - * the search at the rpi_base as reported by the port. + * Fetch the next logical rpi. Because this index is logical, + * the driver starts at 0 each time. */ spin_lock_irq(&phba->hbalock); - rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base); - if (rpi >= rpi_limit || rpi < rpi_base) + rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, 0); + if (rpi >= rpi_limit) rpi = LPFC_RPI_ALLOC_ERROR; else { set_bit(rpi, phba->sli4_hba.rpi_bmask); @@ -12678,7 +13986,7 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) /* * Don't try to allocate more rpi header regions if the device limit - * on available rpis max has been exhausted. + * has been exhausted. */ if ((rpi == LPFC_RPI_ALLOC_ERROR) && (phba->sli4_hba.rpi_count >= max_rpi)) { @@ -12687,13 +13995,21 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) } /* + * RPI header postings are not required for SLI4 ports capable of + * extents. + */ + if (!phba->sli4_hba.rpi_hdrs_in_use) { + spin_unlock_irq(&phba->hbalock); + return rpi; + } + + /* * If the driver is running low on rpi resources, allocate another * page now. Note that the next_rpi value is used because * it represents how many are actually in use whereas max_rpi notes * how many are supported max by the device. */ - rpi_remaining = phba->sli4_hba.next_rpi - rpi_base - - phba->sli4_hba.rpi_count; + rpi_remaining = phba->sli4_hba.next_rpi - phba->sli4_hba.rpi_count; spin_unlock_irq(&phba->hbalock); if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) { rpi_hdr = lpfc_sli4_create_rpi_hdr(phba); @@ -12702,6 +14018,8 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) "2002 Error Could not grow rpi " "count\n"); } else { + lrpi = rpi_hdr->start_rpi; + rpi_hdr->start_rpi = phba->sli4_hba.rpi_ids[lrpi]; lpfc_sli4_post_rpi_hdr(phba, rpi_hdr); } } @@ -12751,6 +14069,8 @@ void lpfc_sli4_remove_rpis(struct lpfc_hba *phba) { kfree(phba->sli4_hba.rpi_bmask); + kfree(phba->sli4_hba.rpi_ids); + bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); } /** @@ -13490,6 +14810,96 @@ out: } /** + * lpfc_wr_object - write an object to the firmware + * @phba: HBA structure that indicates port to create a queue on. + * @dmabuf_list: list of dmabufs to write to the port. + * @size: the total byte value of the objects to write to the port. + * @offset: the current offset to be used to start the transfer. + * + * This routine will create a wr_object mailbox command to send to the port. + * the mailbox command will be constructed using the dma buffers described in + * @dmabuf_list to create a list of BDEs. This routine will fill in as many + * BDEs that the imbedded mailbox can support. The @offset variable will be + * used to indicate the starting offset of the transfer and will also return + * the offset after the write object mailbox has completed. @size is used to + * determine the end of the object and whether the eof bit should be set. + * + * Return 0 is successful and offset will contain the the new offset to use + * for the next write. + * Return negative value for error cases. + **/ +int +lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list, + uint32_t size, uint32_t *offset) +{ + struct lpfc_mbx_wr_object *wr_object; + LPFC_MBOXQ_t *mbox; + int rc = 0, i = 0; + uint32_t shdr_status, shdr_add_status; + uint32_t mbox_tmo; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_dmabuf *dmabuf; + uint32_t written = 0; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_WRITE_OBJECT, + sizeof(struct lpfc_mbx_wr_object) - + sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED); + + wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object; + wr_object->u.request.write_offset = *offset; + sprintf((uint8_t *)wr_object->u.request.object_name, "/"); + wr_object->u.request.object_name[0] = + cpu_to_le32(wr_object->u.request.object_name[0]); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0); + list_for_each_entry(dmabuf, dmabuf_list, list) { + if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size) + break; + wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys); + wr_object->u.request.bde[i].addrHigh = + putPaddrHigh(dmabuf->phys); + if (written + SLI4_PAGE_SIZE >= size) { + wr_object->u.request.bde[i].tus.f.bdeSize = + (size - written); + written += (size - written); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1); + } else { + wr_object->u.request.bde[i].tus.f.bdeSize = + SLI4_PAGE_SIZE; + written += SLI4_PAGE_SIZE; + } + i++; + } + wr_object->u.request.bde_count = i; + bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + /* The IOCTL status is embedded in the mailbox subheader. */ + shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3025 Write Object mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + rc = -ENXIO; + } else + *offset += wr_object->u.response.actual_write_length; + return rc; +} + +/** * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands. * @vport: pointer to vport data structure. * @@ -13644,7 +15054,7 @@ lpfc_drain_txq(struct lpfc_hba *phba) * never happen */ sglq = __lpfc_clear_active_sglq(phba, - sglq->sli4_xritag); + sglq->sli4_lxritag); spin_unlock_irqrestore(&phba->hbalock, iflags); lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2823 txq empty and txq_cnt is %d\n ", @@ -13656,6 +15066,7 @@ lpfc_drain_txq(struct lpfc_hba *phba) /* The xri and iocb resources secured, * attempt to issue request */ + piocbq->sli4_lxritag = sglq->sli4_lxritag; piocbq->sli4_xritag = sglq->sli4_xritag; if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocbq, sglq)) fail_msg = "to convert bpl to sgl"; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 453577c21c14..a0075b0af142 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -52,6 +52,7 @@ struct lpfc_iocbq { struct list_head clist; struct list_head dlist; uint16_t iotag; /* pre-assigned IO tag */ + uint16_t sli4_lxritag; /* logical pre-assigned XRI. */ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */ struct lpfc_cq_event cq_event; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 1a3cbf88f2ce..4b1703554a26 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -310,7 +310,6 @@ struct lpfc_max_cfg_param { uint16_t vfi_base; uint16_t vfi_used; uint16_t max_fcfi; - uint16_t fcfi_base; uint16_t fcfi_used; uint16_t max_eq; uint16_t max_rq; @@ -365,6 +364,11 @@ struct lpfc_pc_sli4_params { uint8_t rqv; }; +struct lpfc_iov { + uint32_t pf_number; + uint32_t vf_number; +}; + /* SLI4 HBA data structure entries */ struct lpfc_sli4_hba { void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for @@ -444,10 +448,13 @@ struct lpfc_sli4_hba { uint32_t intr_enable; struct lpfc_bmbx bmbx; struct lpfc_max_cfg_param max_cfg_param; + uint16_t extents_in_use; /* must allocate resource extents. */ + uint16_t rpi_hdrs_in_use; /* must post rpi hdrs if set. */ uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */ uint16_t next_rpi; uint16_t scsi_xri_max; uint16_t scsi_xri_cnt; + uint16_t scsi_xri_start; struct list_head lpfc_free_sgl_list; struct list_head lpfc_sgl_list; struct lpfc_sglq **lpfc_els_sgl_array; @@ -458,7 +465,17 @@ struct lpfc_sli4_hba { struct lpfc_sglq **lpfc_sglq_active_list; struct list_head lpfc_rpi_hdr_list; unsigned long *rpi_bmask; + uint16_t *rpi_ids; uint16_t rpi_count; + struct list_head lpfc_rpi_blk_list; + unsigned long *xri_bmask; + uint16_t *xri_ids; + uint16_t xri_count; + struct list_head lpfc_xri_blk_list; + unsigned long *vfi_bmask; + uint16_t *vfi_ids; + uint16_t vfi_count; + struct list_head lpfc_vfi_blk_list; struct lpfc_sli4_flags sli4_flags; struct list_head sp_queue_event; struct list_head sp_cqe_event_pool; @@ -467,6 +484,7 @@ struct lpfc_sli4_hba { struct list_head sp_els_xri_aborted_work_queue; struct list_head sp_unsol_work_queue; struct lpfc_sli4_link link_state; + struct lpfc_iov iov; spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */ spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */ }; @@ -490,6 +508,7 @@ struct lpfc_sglq { enum lpfc_sgl_state state; struct lpfc_nodelist *ndlp; /* ndlp associated with IO */ uint16_t iotag; /* pre-assigned IO tag */ + uint16_t sli4_lxritag; /* logical pre-assigned xri. */ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */ struct sli4_sge *sgl; /* pre-assigned SGL */ void *virt; /* virtual address. */ @@ -504,6 +523,13 @@ struct lpfc_rpi_hdr { uint32_t start_rpi; }; +struct lpfc_rsrc_blks { + struct list_head list; + uint16_t rsrc_start; + uint16_t rsrc_size; + uint16_t rsrc_used; +}; + /* * SLI4 specific function prototypes */ @@ -543,8 +569,11 @@ int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t); int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *); uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *); int lpfc_sli4_post_async_mbox(struct lpfc_hba *); -int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba); +int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba); +int lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba); int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int); +int lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *, struct list_head *, + int); struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *); struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *); void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *); diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 30ba5440c67a..1feb551a57bc 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -83,7 +83,7 @@ inline void lpfc_vport_set_state(struct lpfc_vport *vport, static int lpfc_alloc_vpi(struct lpfc_hba *phba) { - int vpi; + unsigned long vpi; spin_lock_irq(&phba->hbalock); /* Start at bit 1 because vpi zero is reserved for the physical port */ diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 046dcc672ec1..7370c084b178 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -33,9 +33,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.05.34-rc1" -#define MEGASAS_RELDATE "Feb. 24, 2011" -#define MEGASAS_EXT_VERSION "Thu. Feb. 24 17:00:00 PDT 2011" +#define MEGASAS_VERSION "00.00.05.38-rc1" +#define MEGASAS_RELDATE "May. 11, 2011" +#define MEGASAS_EXT_VERSION "Wed. May. 11 17:00:00 PDT 2011" /* * Device IDs @@ -76,8 +76,8 @@ #define MFI_STATE_READY 0xB0000000 #define MFI_STATE_OPERATIONAL 0xC0000000 #define MFI_STATE_FAULT 0xF0000000 -#define MFI_RESET_REQUIRED 0x00000001 - +#define MFI_RESET_REQUIRED 0x00000001 +#define MFI_RESET_ADAPTER 0x00000002 #define MEGAMFI_FRAME_SIZE 64 /* diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 89c623ebadbc..2d8cdce7b2f5 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * FILE: megaraid_sas_base.c - * Version : v00.00.05.34-rc1 + * Version : v00.00.05.38-rc1 * * Authors: LSI Corporation * Sreenivas Bagalkote @@ -437,15 +437,18 @@ megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs) static int megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) { - u32 status; + u32 status, mfiStatus = 0; + /* * Check if it is our interrupt */ status = readl(®s->outbound_intr_status); - if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) { - return 0; - } + if (status & MFI_REPLY_1078_MESSAGE_INTERRUPT) + mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE; + + if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) + mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE; /* * Clear the interrupt by writing back the same value @@ -455,8 +458,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) /* Dummy readl to force pci flush */ readl(®s->outbound_doorbell_clear); - return 1; + return mfiStatus; } + /** * megasas_fire_cmd_ppc - Sends command to the FW * @frame_phys_addr : Physical address of cmd @@ -477,17 +481,6 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance, } /** - * megasas_adp_reset_ppc - For controller reset - * @regs: MFI register set - */ -static int -megasas_adp_reset_ppc(struct megasas_instance *instance, - struct megasas_register_set __iomem *regs) -{ - return 0; -} - -/** * megasas_check_reset_ppc - For controller reset check * @regs: MFI register set */ @@ -495,8 +488,12 @@ static int megasas_check_reset_ppc(struct megasas_instance *instance, struct megasas_register_set __iomem *regs) { + if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) + return 1; + return 0; } + static struct megasas_instance_template megasas_instance_template_ppc = { .fire_cmd = megasas_fire_cmd_ppc, @@ -504,7 +501,7 @@ static struct megasas_instance_template megasas_instance_template_ppc = { .disable_intr = megasas_disable_intr_ppc, .clear_intr = megasas_clear_intr_ppc, .read_fw_status_reg = megasas_read_fw_status_reg_ppc, - .adp_reset = megasas_adp_reset_ppc, + .adp_reset = megasas_adp_reset_xscale, .check_reset = megasas_check_reset_ppc, .service_isr = megasas_isr, .tasklet = megasas_complete_cmd_dpc, @@ -620,6 +617,9 @@ static int megasas_check_reset_skinny(struct megasas_instance *instance, struct megasas_register_set __iomem *regs) { + if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) + return 1; + return 0; } @@ -3454,7 +3454,7 @@ static int megasas_init_fw(struct megasas_instance *instance) { u32 max_sectors_1; u32 max_sectors_2; - u32 tmp_sectors; + u32 tmp_sectors, msix_enable; struct megasas_register_set __iomem *reg_set; struct megasas_ctrl_info *ctrl_info; unsigned long bar_list; @@ -3507,6 +3507,13 @@ static int megasas_init_fw(struct megasas_instance *instance) if (megasas_transition_to_ready(instance)) goto fail_ready_state; + /* Check if MSI-X is supported while in ready state */ + msix_enable = (instance->instancet->read_fw_status_reg(reg_set) & + 0x4000000) >> 0x1a; + if (msix_enable && !msix_disable && + !pci_enable_msix(instance->pdev, &instance->msixentry, 1)) + instance->msi_flag = 1; + /* Get operational params, sge flags, send init cmd to controller */ if (instance->instancet->init_adapter(instance)) goto fail_init_adapter; @@ -4076,14 +4083,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else INIT_WORK(&instance->work_init, process_fw_state_change_wq); - /* Try to enable MSI-X */ - if ((instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078R) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078DE) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_VERDE_ZCR) && - !msix_disable && !pci_enable_msix(instance->pdev, - &instance->msixentry, 1)) - instance->msi_flag = 1; - /* * Initialize MFI Firmware */ @@ -4116,6 +4115,14 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) megasas_mgmt_info.max_index++; /* + * Register with SCSI mid-layer + */ + if (megasas_io_attach(instance)) + goto fail_io_attach; + + instance->unload = 0; + + /* * Initiate AEN (Asynchronous Event Notification) */ if (megasas_start_aen(instance)) { @@ -4123,13 +4130,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) goto fail_start_aen; } - /* - * Register with SCSI mid-layer - */ - if (megasas_io_attach(instance)) - goto fail_io_attach; - - instance->unload = 0; return 0; fail_start_aen: @@ -4332,10 +4332,6 @@ megasas_resume(struct pci_dev *pdev) if (megasas_set_dma_mask(pdev)) goto fail_set_dma_mask; - /* Now re-enable MSI-X */ - if (instance->msi_flag) - pci_enable_msix(instance->pdev, &instance->msixentry, 1); - /* * Initialize MFI Firmware */ @@ -4348,6 +4344,10 @@ megasas_resume(struct pci_dev *pdev) if (megasas_transition_to_ready(instance)) goto fail_ready_state; + /* Now re-enable MSI-X */ + if (instance->msi_flag) + pci_enable_msix(instance->pdev, &instance->msixentry, 1); + switch (instance->pdev->device) { case PCI_DEVICE_ID_LSI_FUSION: { @@ -4384,12 +4384,6 @@ megasas_resume(struct pci_dev *pdev) instance->instancet->enable_intr(instance->reg_set); - /* - * Initiate AEN (Asynchronous Event Notification) - */ - if (megasas_start_aen(instance)) - printk(KERN_ERR "megasas: Start AEN failed\n"); - /* Initialize the cmd completion timer */ if (poll_mode_io) megasas_start_timer(instance, &instance->io_completion_timer, @@ -4397,6 +4391,12 @@ megasas_resume(struct pci_dev *pdev) MEGASAS_COMPLETION_TIMER_INTERVAL); instance->unload = 0; + /* + * Initiate AEN (Asynchronous Event Notification) + */ + if (megasas_start_aen(instance)) + printk(KERN_ERR "megasas: Start AEN failed\n"); + return 0; fail_irq: @@ -4527,6 +4527,11 @@ static void megasas_shutdown(struct pci_dev *pdev) instance->unload = 1; megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); + instance->instancet->disable_intr(instance->reg_set); + free_irq(instance->msi_flag ? instance->msixentry.vector : + instance->pdev->irq, instance); + if (instance->msi_flag) + pci_disable_msix(instance->pdev); } /** diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 145a8cffb1fa..f13e7abd345a 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -696,22 +696,6 @@ fail_get_cmd: } /* - * megasas_return_cmd_for_smid - Returns a cmd_fusion for a SMID - * @instance: Adapter soft state - * - */ -void -megasas_return_cmd_for_smid(struct megasas_instance *instance, u16 smid) -{ - struct fusion_context *fusion; - struct megasas_cmd_fusion *cmd; - - fusion = instance->ctrl_context; - cmd = fusion->cmd_list[smid - 1]; - megasas_return_cmd_fusion(instance, cmd); -} - -/* * megasas_get_ld_map_info - Returns FW's ld_map structure * @instance: Adapter soft state * @pend: Pend the command or not @@ -1153,7 +1137,7 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len, u64 start_blk = io_info->pdBlock; u8 *cdb = io_request->CDB.CDB32; u32 num_blocks = io_info->numBlocks; - u8 opcode, flagvals, groupnum, control; + u8 opcode = 0, flagvals = 0, groupnum = 0, control = 0; /* Check if T10 PI (DIF) is enabled for this LD */ ld = MR_TargetIdToLdGet(io_info->ldTgtId, local_map_ptr); @@ -1235,7 +1219,46 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len, cdb[8] = (u8)(num_blocks & 0xff); cdb[7] = (u8)((num_blocks >> 8) & 0xff); + io_request->IoFlags = 10; /* Specify 10-byte cdb */ cdb_len = 10; + } else if ((cdb_len < 16) && (start_blk > 0xffffffff)) { + /* Convert to 16 byte CDB for large LBA's */ + switch (cdb_len) { + case 6: + opcode = cdb[0] == READ_6 ? READ_16 : WRITE_16; + control = cdb[5]; + break; + case 10: + opcode = + cdb[0] == READ_10 ? READ_16 : WRITE_16; + flagvals = cdb[1]; + groupnum = cdb[6]; + control = cdb[9]; + break; + case 12: + opcode = + cdb[0] == READ_12 ? READ_16 : WRITE_16; + flagvals = cdb[1]; + groupnum = cdb[10]; + control = cdb[11]; + break; + } + + memset(cdb, 0, sizeof(io_request->CDB.CDB32)); + + cdb[0] = opcode; + cdb[1] = flagvals; + cdb[14] = groupnum; + cdb[15] = control; + + /* Transfer length */ + cdb[13] = (u8)(num_blocks & 0xff); + cdb[12] = (u8)((num_blocks >> 8) & 0xff); + cdb[11] = (u8)((num_blocks >> 16) & 0xff); + cdb[10] = (u8)((num_blocks >> 24) & 0xff); + + io_request->IoFlags = 16; /* Specify 16-byte cdb */ + cdb_len = 16; } /* Normal case, just load LBA here */ @@ -2026,17 +2049,11 @@ int megasas_reset_fusion(struct Scsi_Host *shost) struct fusion_context *fusion; struct megasas_cmd *cmd_mfi; union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc; - u32 host_diag, abs_state; + u32 host_diag, abs_state, status_reg, reset_adapter; instance = (struct megasas_instance *)shost->hostdata; fusion = instance->ctrl_context; - mutex_lock(&instance->reset_mutex); - set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); - instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT; - instance->instancet->disable_intr(instance->reg_set); - msleep(1000); - if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) { printk(KERN_WARNING "megaraid_sas: Hardware critical error, " "returning FAILED.\n"); @@ -2044,6 +2061,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost) goto out; } + mutex_lock(&instance->reset_mutex); + set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); + instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT; + instance->instancet->disable_intr(instance->reg_set); + msleep(1000); + /* First try waiting for commands to complete */ if (megasas_wait_for_outstanding_fusion(instance)) { printk(KERN_WARNING "megaraid_sas: resetting fusion " @@ -2060,7 +2083,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost) } } - if (instance->disableOnlineCtrlReset == 1) { + status_reg = instance->instancet->read_fw_status_reg( + instance->reg_set); + abs_state = status_reg & MFI_STATE_MASK; + reset_adapter = status_reg & MFI_RESET_ADAPTER; + if (instance->disableOnlineCtrlReset || + (abs_state == MFI_STATE_FAULT && !reset_adapter)) { /* Reset not supported, kill adapter */ printk(KERN_WARNING "megaraid_sas: Reset not supported" ", killing adapter.\n"); @@ -2089,6 +2117,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) /* Check that the diag write enable (DRWE) bit is on */ host_diag = readl(&instance->reg_set->fusion_host_diag); + retry = 0; while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) { msleep(100); host_diag = @@ -2126,7 +2155,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) abs_state = instance->instancet->read_fw_status_reg( - instance->reg_set); + instance->reg_set) & MFI_STATE_MASK; retry = 0; while ((abs_state <= MFI_STATE_FW_INIT) && @@ -2134,7 +2163,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) msleep(100); abs_state = instance->instancet->read_fw_status_reg( - instance->reg_set); + instance->reg_set) & MFI_STATE_MASK; } if (abs_state <= MFI_STATE_FW_INIT) { printk(KERN_WARNING "megaraid_sas: firmware " diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 2a3c05f6db8b..dcc289c25459 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>" #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "08.100.00.01" +#define MPT2SAS_DRIVER_VERSION "08.100.00.02" #define MPT2SAS_MAJOR_VERSION 08 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 -#define MPT2SAS_RELEASE_VERSION 01 +#define MPT2SAS_RELEASE_VERSION 02 /* * Set MPT2SAS_SG_DEPTH value based on user input. diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index f12e02358d6d..a7dbc6825f5f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -113,6 +113,7 @@ struct sense_info { }; +#define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC) #define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) /** @@ -121,6 +122,7 @@ struct sense_info { * @work: work object (ioc->fault_reset_work_q) * @cancel_pending_work: flag set during reset handling * @ioc: per adapter object + * @device_handle: device handle * @VF_ID: virtual function id * @VP_ID: virtual port id * @ignore: flag meaning this event has been marked to ignore @@ -134,6 +136,7 @@ struct fw_event_work { u8 cancel_pending_work; struct delayed_work delayed_work; struct MPT2SAS_ADAPTER *ioc; + u16 device_handle; u8 VF_ID; u8 VP_ID; u8 ignore; @@ -3499,6 +3502,7 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) switch (prot_type) { case SCSI_PROT_DIF_TYPE1: + case SCSI_PROT_DIF_TYPE2: /* * enable ref/guard checking @@ -3511,13 +3515,6 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) cpu_to_be32(scsi_get_lba(scmd)); break; - case SCSI_PROT_DIF_TYPE2: - - eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; - break; - case SCSI_PROT_DIF_TYPE3: /* @@ -4047,17 +4044,75 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, #endif /** - * _scsih_smart_predicted_fault - illuminate Fault LED + * _scsih_turn_on_fault_led - illuminate Fault LED * @ioc: per adapter object * @handle: device handle + * Context: process * * Return nothing. */ static void -_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +_scsih_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SepReply_t mpi_reply; Mpi2SepRequest_t mpi_request; + + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: " + "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } +} + +/** + * _scsih_send_event_to_turn_on_fault_led - fire delayed event + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_send_event_to_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct fw_event_work *fw_event; + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_TURN_ON_FAULT_LED; + fw_event->device_handle = handle; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_smart_predicted_fault - process smart errors + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ struct scsi_target *starget; struct MPT2SAS_TARGET *sas_target_priv_data; Mpi2EventNotificationReply_t *event_reply; @@ -4084,30 +4139,8 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) starget_printk(KERN_WARNING, starget, "predicted fault\n"); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) { - memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); - mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; - mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; - mpi_request.SlotStatus = - cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); - mpi_request.DevHandle = cpu_to_le16(handle); - mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; - if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, - &mpi_request)) != 0) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; - } - - if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "enclosure_processor: ioc_status (0x%04x), " - "loginfo(0x%08x)\n", ioc->name, - le16_to_cpu(mpi_reply.IOCStatus), - le32_to_cpu(mpi_reply.IOCLogInfo))); - return; - } - } + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) + _scsih_send_event_to_turn_on_fault_led(ioc, handle); /* insert into event log */ sz = offsetof(Mpi2EventNotificationReply_t, EventData) + @@ -6753,6 +6786,9 @@ _firmware_event_work(struct work_struct *work) } switch (fw_event->event) { + case MPT2SAS_TURN_ON_FAULT_LED: + _scsih_turn_on_fault_led(ioc, fw_event->device_handle); + break; case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: _scsih_sas_topology_change_event(ioc, fw_event); break; diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 58f5be4740e9..de0b1a704fb5 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -4698,12 +4698,14 @@ static int __os_scsi_tape_open(struct inode * inode, struct file * filp) break; if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { + int j; + STp->pos_unknown = 0; STp->partition = STp->new_partition = 0; if (STp->can_partitions) STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); + for (j = 0; j < ST_NBR_PARTITIONS; j++) { + STps = &(STp->ps[j]); STps->rw = ST_IDLE; STps->eof = ST_NOEOF; STps->at_sm = 0; diff --git a/drivers/scsi/qla4xxx/Makefile b/drivers/scsi/qla4xxx/Makefile index 0339ff03a535..252523d7847e 100644 --- a/drivers/scsi/qla4xxx/Makefile +++ b/drivers/scsi/qla4xxx/Makefile @@ -1,5 +1,5 @@ qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \ - ql4_nx.o ql4_nvram.o ql4_dbg.o + ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o diff --git a/drivers/scsi/qla4xxx/ql4_attr.c b/drivers/scsi/qla4xxx/ql4_attr.c new file mode 100644 index 000000000000..864d018631c0 --- /dev/null +++ b/drivers/scsi/qla4xxx/ql4_attr.c @@ -0,0 +1,69 @@ +/* + * QLogic iSCSI HBA Driver + * Copyright (c) 2003-2011 QLogic Corporation + * + * See LICENSE.qla4xxx for copyright and licensing details. + */ + +#include "ql4_def.h" +#include "ql4_glbl.h" +#include "ql4_dbg.h" + +/* Scsi_Host attributes. */ +static ssize_t +qla4xxx_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + + if (is_qla8022(ha)) + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%x)\n", + ha->firmware_version[0], + ha->firmware_version[1], + ha->patch_number, ha->build_number); + else + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d.%02d\n", + ha->firmware_version[0], + ha->firmware_version[1], + ha->patch_number, ha->build_number); +} + +static ssize_t +qla4xxx_serial_num_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%s\n", ha->serial_number); +} + +static ssize_t +qla4xxx_iscsi_version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->iscsi_major, + ha->iscsi_minor); +} + +static ssize_t +qla4xxx_optrom_version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d.%02d\n", + ha->bootload_major, ha->bootload_minor, + ha->bootload_patch, ha->bootload_build); +} + +static DEVICE_ATTR(fw_version, S_IRUGO, qla4xxx_fw_version_show, NULL); +static DEVICE_ATTR(serial_num, S_IRUGO, qla4xxx_serial_num_show, NULL); +static DEVICE_ATTR(iscsi_version, S_IRUGO, qla4xxx_iscsi_version_show, NULL); +static DEVICE_ATTR(optrom_version, S_IRUGO, qla4xxx_optrom_version_show, NULL); + +struct device_attribute *qla4xxx_host_attrs[] = { + &dev_attr_fw_version, + &dev_attr_serial_num, + &dev_attr_iscsi_version, + &dev_attr_optrom_version, + NULL, +}; diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 4757878d59dd..473c5c872b39 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -115,7 +115,7 @@ #define INVALID_ENTRY 0xFFFF #define MAX_CMDS_TO_RISC 1024 #define MAX_SRBS MAX_CMDS_TO_RISC -#define MBOX_AEN_REG_COUNT 5 +#define MBOX_AEN_REG_COUNT 8 #define MAX_INIT_RETRIES 5 /* @@ -368,7 +368,6 @@ struct scsi_qla_host { #define AF_INIT_DONE 1 /* 0x00000002 */ #define AF_MBOX_COMMAND 2 /* 0x00000004 */ #define AF_MBOX_COMMAND_DONE 3 /* 0x00000008 */ -#define AF_DPC_SCHEDULED 5 /* 0x00000020 */ #define AF_INTERRUPTS_ON 6 /* 0x00000040 */ #define AF_GET_CRASH_RECORD 7 /* 0x00000080 */ #define AF_LINK_UP 8 /* 0x00000100 */ @@ -584,6 +583,14 @@ struct scsi_qla_host { uint32_t nx_reset_timeout; struct completion mbx_intr_comp; + + /* --- From About Firmware --- */ + uint16_t iscsi_major; + uint16_t iscsi_minor; + uint16_t bootload_major; + uint16_t bootload_minor; + uint16_t bootload_patch; + uint16_t bootload_build; }; static inline int is_ipv4_enabled(struct scsi_qla_host *ha) diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 31e2bf97198c..01082aa77098 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -690,6 +690,29 @@ struct mbx_sys_info { uint8_t reserved[12]; /* 34-3f */ }; +struct about_fw_info { + uint16_t fw_major; /* 00 - 01 */ + uint16_t fw_minor; /* 02 - 03 */ + uint16_t fw_patch; /* 04 - 05 */ + uint16_t fw_build; /* 06 - 07 */ + uint8_t fw_build_date[16]; /* 08 - 17 ASCII String */ + uint8_t fw_build_time[16]; /* 18 - 27 ASCII String */ + uint8_t fw_build_user[16]; /* 28 - 37 ASCII String */ + uint16_t fw_load_source; /* 38 - 39 */ + /* 1 = Flash Primary, + 2 = Flash Secondary, + 3 = Host Download + */ + uint8_t reserved1[6]; /* 3A - 3F */ + uint16_t iscsi_major; /* 40 - 41 */ + uint16_t iscsi_minor; /* 42 - 43 */ + uint16_t bootload_major; /* 44 - 45 */ + uint16_t bootload_minor; /* 46 - 47 */ + uint16_t bootload_patch; /* 48 - 49 */ + uint16_t bootload_build; /* 4A - 4B */ + uint8_t reserved2[180]; /* 4C - FF */ +}; + struct crash_record { uint16_t fw_major_version; /* 00 - 01 */ uint16_t fw_minor_version; /* 02 - 03 */ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index cc53e3fbd78c..a53a256c1f8d 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -61,7 +61,7 @@ struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha); int qla4xxx_add_sess(struct ddb_entry *); void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry); int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host *ha); -int qla4xxx_get_fw_version(struct scsi_qla_host * ha); +int qla4xxx_about_firmware(struct scsi_qla_host *ha); void qla4xxx_interrupt_service_routine(struct scsi_qla_host *ha, uint32_t intr_status); int qla4xxx_init_rings(struct scsi_qla_host *ha); @@ -139,4 +139,5 @@ extern int ql4xextended_error_logging; extern int ql4xdontresethba; extern int ql4xenablemsix; +extern struct device_attribute *qla4xxx_host_attrs[]; #endif /* _QLA4x_GBL_H */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 48e2241ddaf4..42ed5db2d530 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1275,7 +1275,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, if (ha->isp_ops->start_firmware(ha) == QLA_ERROR) goto exit_init_hba; - if (qla4xxx_get_fw_version(ha) == QLA_ERROR) + if (qla4xxx_about_firmware(ha) == QLA_ERROR) goto exit_init_hba; if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR) diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 2f40ac761cd4..0e72921c752d 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -25,9 +25,14 @@ static void qla4xxx_copy_sense(struct scsi_qla_host *ha, memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); sense_len = le16_to_cpu(sts_entry->senseDataByteCnt); - if (sense_len == 0) + if (sense_len == 0) { + DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%d:%d: %s:" + " sense len 0\n", ha->host_no, + cmd->device->channel, cmd->device->id, + cmd->device->lun, __func__)); + ha->status_srb = NULL; return; - + } /* Save total available sense length, * not to exceed cmd's sense buffer size */ sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE); @@ -541,6 +546,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, case MBOX_ASTS_UNSOLICITED_PDU_RECEIVED: /* Connection mode */ case MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR: case MBOX_ASTS_SUBNET_STATE_CHANGE: + case MBOX_ASTS_DUPLICATE_IP: /* No action */ DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no, mbox_status)); @@ -593,11 +599,13 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, mbox_sts[i]; /* print debug message */ - DEBUG2(printk("scsi%ld: AEN[%d] %04x queued" - " mb1:0x%x mb2:0x%x mb3:0x%x mb4:0x%x\n", - ha->host_no, ha->aen_in, mbox_sts[0], - mbox_sts[1], mbox_sts[2], mbox_sts[3], - mbox_sts[4])); + DEBUG2(printk("scsi%ld: AEN[%d] %04x queued " + "mb1:0x%x mb2:0x%x mb3:0x%x " + "mb4:0x%x mb5:0x%x\n", + ha->host_no, ha->aen_in, + mbox_sts[0], mbox_sts[1], + mbox_sts[2], mbox_sts[3], + mbox_sts[4], mbox_sts[5])); /* advance pointer */ ha->aen_in++; diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index d78b58dc5011..fce8289e9752 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -86,22 +86,8 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, msleep(10); } - /* To prevent overwriting mailbox registers for a command that has - * not yet been serviced, check to see if an active command - * (AEN, IOCB, etc.) is interrupting, then service it. - * ----------------------------------------------------------------- - */ spin_lock_irqsave(&ha->hardware_lock, flags); - if (!is_qla8022(ha)) { - intr_status = readl(&ha->reg->ctrl_status); - if (intr_status & CSR_SCSI_PROCESSOR_INTR) { - /* Service existing interrupt */ - ha->isp_ops->interrupt_service_routine(ha, intr_status); - clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); - } - } - ha->mbox_status_count = outCount; for (i = 0; i < outCount; i++) ha->mbox_status[i] = 0; @@ -1057,38 +1043,65 @@ int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr, } /** - * qla4xxx_get_fw_version - gets firmware version + * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version * @ha: Pointer to host adapter structure. * - * Retrieves the firmware version on HBA. In QLA4010, mailboxes 2 & 3 may - * hold an address for data. Make sure that we write 0 to those mailboxes, - * if unused. + * Retrieves the FW version, iSCSI draft version & bootloader version of HBA. + * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to + * those mailboxes, if unused. **/ -int qla4xxx_get_fw_version(struct scsi_qla_host * ha) +int qla4xxx_about_firmware(struct scsi_qla_host *ha) { + struct about_fw_info *about_fw = NULL; + dma_addr_t about_fw_dma; uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; + int status = QLA_ERROR; + + about_fw = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct about_fw_info), + &about_fw_dma, GFP_KERNEL); + if (!about_fw) { + DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory " + "for about_fw\n", __func__)); + return status; + } - /* Get firmware version. */ + memset(about_fw, 0, sizeof(struct about_fw_info)); memset(&mbox_cmd, 0, sizeof(mbox_cmd)); memset(&mbox_sts, 0, sizeof(mbox_sts)); mbox_cmd[0] = MBOX_CMD_ABOUT_FW; - - if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != - QLA_SUCCESS) { - DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ " - "status %04X\n", ha->host_no, __func__, mbox_sts[0])); - return QLA_ERROR; + mbox_cmd[2] = LSDW(about_fw_dma); + mbox_cmd[3] = MSDW(about_fw_dma); + mbox_cmd[4] = sizeof(struct about_fw_info); + + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT, + &mbox_cmd[0], &mbox_sts[0]); + if (status != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW " + "failed w/ status %04X\n", __func__, + mbox_sts[0])); + goto exit_about_fw; } - /* Save firmware version information. */ - ha->firmware_version[0] = mbox_sts[1]; - ha->firmware_version[1] = mbox_sts[2]; - ha->patch_number = mbox_sts[3]; - ha->build_number = mbox_sts[4]; + /* Save version information. */ + ha->firmware_version[0] = le16_to_cpu(about_fw->fw_major); + ha->firmware_version[1] = le16_to_cpu(about_fw->fw_minor); + ha->patch_number = le16_to_cpu(about_fw->fw_patch); + ha->build_number = le16_to_cpu(about_fw->fw_build); + ha->iscsi_major = le16_to_cpu(about_fw->iscsi_major); + ha->iscsi_minor = le16_to_cpu(about_fw->iscsi_minor); + ha->bootload_major = le16_to_cpu(about_fw->bootload_major); + ha->bootload_minor = le16_to_cpu(about_fw->bootload_minor); + ha->bootload_patch = le16_to_cpu(about_fw->bootload_patch); + ha->bootload_build = le16_to_cpu(about_fw->bootload_build); + status = QLA_SUCCESS; - return QLA_SUCCESS; +exit_about_fw: + dma_free_coherent(&ha->pdev->dev, sizeof(struct about_fw_info), + about_fw, about_fw_dma); + return status; } static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 03e522b2fe0b..fdfe27b38698 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -964,12 +964,26 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) /* Halt all the indiviual PEGs and other blocks of the ISP */ qla4_8xxx_rom_lock(ha); - /* mask all niu interrupts */ + /* disable all I2Q */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0); + + /* disable all niu interrupts */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff); /* disable xge rx/tx */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00); /* disable xg1 rx/tx */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00); + /* disable sideband mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00); + /* disable ap0 mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00); + /* disable ap1 mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00); /* halt sre */ val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000); @@ -984,6 +998,7 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0); qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0); qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0); /* halt pegs */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1); @@ -991,9 +1006,9 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1); qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1); qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1); + msleep(5); /* big hammer */ - msleep(1000); if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) /* don't reset CAM block on reset */ qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index c22f2a764d9d..f2364ec59f03 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -124,6 +124,7 @@ static struct scsi_host_template qla4xxx_driver_template = { .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, + .shost_attrs = qla4xxx_host_attrs, }; static struct iscsi_transport qla4xxx_iscsi_transport = { @@ -412,8 +413,7 @@ void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha) static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) + struct scsi_cmnd *cmd) { struct srb *srb; @@ -427,7 +427,6 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, srb->cmd = cmd; srb->flags = 0; CMD_SP(cmd) = (void *)srb; - cmd->scsi_done = done; return srb; } @@ -458,9 +457,8 @@ void qla4xxx_srb_compl(struct kref *ref) /** * qla4xxx_queuecommand - scsi layer issues scsi command to driver. + * @host: scsi host * @cmd: Pointer to Linux's SCSI command structure - * @done_fn: Function that the driver calls to notify the SCSI mid-layer - * that the command has been processed. * * Remarks: * This routine is invoked by Linux to send a SCSI command to the driver. @@ -470,10 +468,9 @@ void qla4xxx_srb_compl(struct kref *ref) * completion handling). Unfortunely, it sometimes calls the scheduler * in interrupt context which is a big NO! NO!. **/ -static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) +static int qla4xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) { - struct scsi_qla_host *ha = to_qla_host(cmd->device->host); + struct scsi_qla_host *ha = to_qla_host(host); struct ddb_entry *ddb_entry = cmd->device->hostdata; struct iscsi_cls_session *sess = ddb_entry->sess; struct srb *srb; @@ -515,37 +512,29 @@ static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd, test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) goto qc_host_busy; - spin_unlock_irq(ha->host->host_lock); - - srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd, done); + srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd); if (!srb) - goto qc_host_busy_lock; + goto qc_host_busy; rval = qla4xxx_send_command_to_isp(ha, srb); if (rval != QLA_SUCCESS) goto qc_host_busy_free_sp; - spin_lock_irq(ha->host->host_lock); return 0; qc_host_busy_free_sp: qla4xxx_srb_free_dma(ha, srb); mempool_free(srb, ha->srb_mempool); -qc_host_busy_lock: - spin_lock_irq(ha->host->host_lock); - qc_host_busy: return SCSI_MLQUEUE_HOST_BUSY; qc_fail_command: - done(cmd); + cmd->scsi_done(cmd); return 0; } -static DEF_SCSI_QCMD(qla4xxx_queuecommand) - /** * qla4xxx_mem_free - frees memory allocated to adapter * @ha: Pointer to host adapter structure. @@ -679,7 +668,27 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) if (ha->seconds_since_last_heartbeat == 2) { ha->seconds_since_last_heartbeat = 0; halt_status = qla4_8xxx_rd_32(ha, - QLA82XX_PEG_HALT_STATUS1); + QLA82XX_PEG_HALT_STATUS1); + + ql4_printk(KERN_INFO, ha, + "scsi(%ld): %s, Dumping hw/fw registers:\n " + " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:" + " 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:" + " 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:" + " 0x%x,\n PEG_NET_4_PC: 0x%x\n", + ha->host_no, __func__, halt_status, + qla4_8xxx_rd_32(ha, + QLA82XX_PEG_HALT_STATUS2), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + + 0x3c)); /* Since we cannot change dev_state in interrupt * context, set appropriate DPC flag then wakeup @@ -715,7 +724,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) /* don't poll if reset is going on */ if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) || test_bit(DPC_RESET_HA, &ha->dpc_flags) || - test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags))) { + test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) { if (dev_state == QLA82XX_DEV_NEED_RESET && !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { if (!ql4xdontresethba) { @@ -839,7 +848,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) } /* Wakeup the dpc routine for this adapter, if needed. */ - if ((start_dpc || + if (start_dpc || test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) || @@ -849,9 +858,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) || test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || - test_bit(DPC_AEN, &ha->dpc_flags)) && - !test_bit(AF_DPC_SCHEDULED, &ha->flags) && - ha->dpc_thread) { + test_bit(DPC_AEN, &ha->dpc_flags)) { DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" " - dpc flags = 0x%lx\n", ha->host_no, __func__, ha->dpc_flags)); @@ -1241,11 +1248,8 @@ static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha) void qla4xxx_wake_dpc(struct scsi_qla_host *ha) { - if (ha->dpc_thread && - !test_bit(AF_DPC_SCHEDULED, &ha->flags)) { - set_bit(AF_DPC_SCHEDULED, &ha->flags); + if (ha->dpc_thread) queue_work(ha->dpc_thread, &ha->dpc_work); - } } /** @@ -1272,12 +1276,12 @@ static void qla4xxx_do_dpc(struct work_struct *work) /* Initialization not yet finished. Don't do anything yet. */ if (!test_bit(AF_INIT_DONE, &ha->flags)) - goto do_dpc_exit; + return; if (test_bit(AF_EEH_BUSY, &ha->flags)) { DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n", ha->host_no, __func__, ha->flags)); - goto do_dpc_exit; + return; } if (is_qla8022(ha)) { @@ -1384,8 +1388,6 @@ dpc_post_reset_ha: } } -do_dpc_exit: - clear_bit(AF_DPC_SCHEDULED, &ha->flags); } /** diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 603155769407..610492877253 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k6" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k7" diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index abea2cf05c2e..a4b9cdbaaa0b 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -50,6 +50,8 @@ #define BUS_RESET_SETTLE_TIME (10) #define HOST_RESET_SETTLE_TIME (10) +static int scsi_eh_try_stu(struct scsi_cmnd *scmd); + /* called with shost->host_lock held */ void scsi_eh_wakeup(struct Scsi_Host *shost) { @@ -947,6 +949,48 @@ retry_tur: } /** + * scsi_eh_test_devices - check if devices are responding from error recovery. + * @cmd_list: scsi commands in error recovery. + * @work_q: queue for commands which still need more error recovery + * @done_q: queue for commands which are finished + * @try_stu: boolean on if a STU command should be tried in addition to TUR. + * + * Decription: + * Tests if devices are in a working state. Commands to devices now in + * a working state are sent to the done_q while commands to devices which + * are still failing to respond are returned to the work_q for more + * processing. + **/ +static int scsi_eh_test_devices(struct list_head *cmd_list, + struct list_head *work_q, + struct list_head *done_q, int try_stu) +{ + struct scsi_cmnd *scmd, *next; + struct scsi_device *sdev; + int finish_cmds; + + while (!list_empty(cmd_list)) { + scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry); + sdev = scmd->device; + + finish_cmds = !scsi_device_online(scmd->device) || + (try_stu && !scsi_eh_try_stu(scmd) && + !scsi_eh_tur(scmd)) || + !scsi_eh_tur(scmd); + + list_for_each_entry_safe(scmd, next, cmd_list, eh_entry) + if (scmd->device == sdev) { + if (finish_cmds) + scsi_eh_finish_cmd(scmd, done_q); + else + list_move_tail(&scmd->eh_entry, work_q); + } + } + return list_empty(work_q); +} + + +/** * scsi_eh_abort_cmds - abort pending commands. * @work_q: &list_head for pending commands. * @done_q: &list_head for processed commands. @@ -962,6 +1006,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *scmd, *next; + LIST_HEAD(check_list); int rtn; list_for_each_entry_safe(scmd, next, work_q, eh_entry) { @@ -973,11 +1018,10 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, rtn = scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd); if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { scmd->eh_eflags &= ~SCSI_EH_CANCEL_CMD; - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - !scsi_eh_tur(scmd)) { + if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); - } + else + list_move_tail(&scmd->eh_entry, &check_list); } else SCSI_LOG_ERROR_RECOVERY(3, printk("%s: aborting" " cmd failed:" @@ -986,7 +1030,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, scmd)); } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1137,6 +1181,7 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, struct list_head *done_q) { LIST_HEAD(tmp_list); + LIST_HEAD(check_list); list_splice_init(work_q, &tmp_list); @@ -1161,9 +1206,9 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, if (scmd_id(scmd) != id) continue; - if ((rtn == SUCCESS || rtn == FAST_IO_FAIL) - && (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || !scsi_eh_tur(scmd))) + if (rtn == SUCCESS) + list_move_tail(&scmd->eh_entry, &check_list); + else if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); else /* push back on work queue for further processing */ @@ -1171,7 +1216,7 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1185,6 +1230,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *done_q) { struct scsi_cmnd *scmd, *chan_scmd, *next; + LIST_HEAD(check_list); unsigned int channel; int rtn; @@ -1216,12 +1262,14 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, rtn = scsi_try_bus_reset(chan_scmd); if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { - if (channel == scmd_channel(scmd)) - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - !scsi_eh_tur(scmd)) + if (channel == scmd_channel(scmd)) { + if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); + else + list_move_tail(&scmd->eh_entry, + &check_list); + } } } else { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: BRST" @@ -1230,7 +1278,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, channel)); } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1242,6 +1290,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *scmd, *next; + LIST_HEAD(check_list); int rtn; if (!list_empty(work_q)) { @@ -1252,12 +1301,10 @@ static int scsi_eh_host_reset(struct list_head *work_q, , current->comm)); rtn = scsi_try_host_reset(scmd); - if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { + if (rtn == SUCCESS) { + list_splice_init(work_q, &check_list); + } else if (rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - (!scsi_eh_try_stu(scmd) && !scsi_eh_tur(scmd)) || - !scsi_eh_tur(scmd)) scsi_eh_finish_cmd(scmd, done_q); } } else { @@ -1266,7 +1313,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, current->comm)); } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 1); } /** diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c index b587289cfacb..2bea4f0b684a 100644 --- a/drivers/scsi/scsi_trace.c +++ b/drivers/scsi/scsi_trace.c @@ -59,6 +59,10 @@ scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len) trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", (unsigned long long)lba, (unsigned long long)txlen, cdb[1] >> 5); + + if (cdb[0] == WRITE_SAME) + trace_seq_printf(p, " unmap=%u", cdb[1] >> 3 & 1); + trace_seq_putc(p, 0); return ret; diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index bd0806e64e85..953773cb26d9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -490,7 +490,8 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) unsigned int max_blocks = 0; q->limits.discard_zeroes_data = sdkp->lbprz; - q->limits.discard_alignment = sdkp->unmap_alignment; + q->limits.discard_alignment = sdkp->unmap_alignment * + logical_block_size; q->limits.discard_granularity = max(sdkp->physical_block_size, sdkp->unmap_granularity * logical_block_size); @@ -2021,16 +2022,26 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) int dbd; int modepage; + int first_len; struct scsi_mode_data data; struct scsi_sense_hdr sshdr; int old_wce = sdkp->WCE; int old_rcd = sdkp->RCD; int old_dpofua = sdkp->DPOFUA; - if (sdp->skip_ms_page_8) - goto defaults; - - if (sdp->type == TYPE_RBC) { + first_len = 4; + if (sdp->skip_ms_page_8) { + if (sdp->type == TYPE_RBC) + goto defaults; + else { + if (sdp->skip_ms_page_3f) + goto defaults; + modepage = 0x3F; + if (sdp->use_192_bytes_for_3f) + first_len = 192; + dbd = 0; + } + } else if (sdp->type == TYPE_RBC) { modepage = 6; dbd = 8; } else { @@ -2039,13 +2050,15 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) } /* cautiously ask */ - res = sd_do_mode_sense(sdp, dbd, modepage, buffer, 4, &data, &sshdr); + res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len, + &data, &sshdr); if (!scsi_status_is_good(res)) goto bad_sense; if (!data.header_length) { modepage = 6; + first_len = 0; sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n"); } @@ -2058,30 +2071,61 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) */ if (len < 3) goto bad_sense; - if (len > 20) - len = 20; - - /* Take headers and block descriptors into account */ - len += data.header_length + data.block_descriptor_length; - if (len > SD_BUF_SIZE) - goto bad_sense; + else if (len > SD_BUF_SIZE) { + sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter " + "data from %d to %d bytes\n", len, SD_BUF_SIZE); + len = SD_BUF_SIZE; + } + if (modepage == 0x3F && sdp->use_192_bytes_for_3f) + len = 192; /* Get the data */ - res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr); + if (len > first_len) + res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, + &data, &sshdr); if (scsi_status_is_good(res)) { int offset = data.header_length + data.block_descriptor_length; - if (offset >= SD_BUF_SIZE - 2) { - sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n"); - goto defaults; + while (offset < len) { + u8 page_code = buffer[offset] & 0x3F; + u8 spf = buffer[offset] & 0x40; + + if (page_code == 8 || page_code == 6) { + /* We're interested only in the first 3 bytes. + */ + if (len - offset <= 2) { + sd_printk(KERN_ERR, sdkp, "Incomplete " + "mode parameter data\n"); + goto defaults; + } else { + modepage = page_code; + goto Page_found; + } + } else { + /* Go to the next page */ + if (spf && len - offset > 3) + offset += 4 + (buffer[offset+2] << 8) + + buffer[offset+3]; + else if (!spf && len - offset > 1) + offset += 2 + buffer[offset+1]; + else { + sd_printk(KERN_ERR, sdkp, "Incomplete " + "mode parameter data\n"); + goto defaults; + } + } } - if ((buffer[offset] & 0x3f) != modepage) { + if (modepage == 0x3F) { + sd_printk(KERN_ERR, sdkp, "No Caching mode page " + "present\n"); + goto defaults; + } else if ((buffer[offset] & 0x3f) != modepage) { sd_printk(KERN_ERR, sdkp, "Got wrong page\n"); goto defaults; } - + Page_found: if (modepage == 8) { sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 9f4b58b7daad..7e22b737dfd8 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -307,7 +307,7 @@ static inline int find_and_clear_bit_16(unsigned long *field) "0: bsfw %1,%w0\n\t" "btr %0,%1\n\t" "jnc 0b" - : "=&r" (rv), "=m" (*field) :); + : "=&r" (rv), "+m" (*field) :); return rv; } diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index aed4e464d31c..dee2a2c909f5 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -31,7 +31,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> -#include <scsi/libsas.h> /* For TASK_ATTR_* */ +#include <scsi/scsi_tcq.h> #include <target/target_core_base.h> #include <target/target_core_transport.h> @@ -95,17 +95,17 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( if (sc->device->tagged_supported) { switch (sc->tag) { case HEAD_OF_QUEUE_TAG: - sam_task_attr = TASK_ATTR_HOQ; + sam_task_attr = MSG_HEAD_TAG; break; case ORDERED_QUEUE_TAG: - sam_task_attr = TASK_ATTR_ORDERED; + sam_task_attr = MSG_ORDERED_TAG; break; default: - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; break; } } else - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; /* * Initialize struct se_cmd descriptor from target_core_mod infrastructure @@ -379,7 +379,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) * Initialize struct se_cmd descriptor from target_core_mod infrastructure */ transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, 0, - DMA_NONE, TASK_ATTR_SIMPLE, + DMA_NONE, MSG_SIMPLE_TAG, &tl_cmd->tl_sense_buf[0]); /* * Allocate the LUN_RESET TMR @@ -939,18 +939,6 @@ static u16 tcm_loop_get_fabric_sense_len(void) return 0; } -static u64 tcm_loop_pack_lun(unsigned int lun) -{ - u64 result; - - /* LSB of lun into byte 1 big-endian */ - result = ((lun & 0xff) << 8); - /* use flat space addressing method */ - result |= 0x40 | ((lun >> 8) & 0x3f); - - return cpu_to_le64(result); -} - static char *tcm_loop_dump_proto_id(struct tcm_loop_hba *tl_hba) { switch (tl_hba->tl_proto_id) { @@ -1481,7 +1469,6 @@ static int tcm_loop_register_configfs(void) fabric->tf_ops.set_fabric_sense_len = &tcm_loop_set_fabric_sense_len; fabric->tf_ops.get_fabric_sense_len = &tcm_loop_get_fabric_sense_len; fabric->tf_ops.is_state_remove = &tcm_loop_is_state_remove; - fabric->tf_ops.pack_lun = &tcm_loop_pack_lun; tf_cg = &fabric->tf_group; /* diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index a5f44a6e6e1d..ee6fad979b50 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -497,10 +497,6 @@ static int target_fabric_tf_ops_check( printk(KERN_ERR "Missing tfo->is_state_remove()\n"); return -EINVAL; } - if (!(tfo->pack_lun)) { - printk(KERN_ERR "Missing tfo->pack_lun()\n"); - return -EINVAL; - } /* * We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn() * tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index d25e20829012..8407f9ca2b31 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -38,6 +38,7 @@ #include <net/sock.h> #include <net/tcp.h> #include <scsi/scsi.h> +#include <scsi/scsi_device.h> #include <target/target_core_base.h> #include <target/target_core_device.h> @@ -150,13 +151,13 @@ out: { struct se_device *dev = se_lun->lun_se_dev; - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_cmds++; if (se_cmd->data_direction == DMA_TO_DEVICE) dev->write_bytes += se_cmd->data_length; else if (se_cmd->data_direction == DMA_FROM_DEVICE) dev->read_bytes += se_cmd->data_length; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); } /* @@ -658,8 +659,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) struct se_session *se_sess = SE_SESS(se_cmd); struct se_task *se_task; unsigned char *buf = (unsigned char *)T_TASK(se_cmd)->t_task_buf; - u32 cdb_offset = 0, lun_count = 0, offset = 8; - u64 i, lun; + u32 cdb_offset = 0, lun_count = 0, offset = 8, i; list_for_each_entry(se_task, &T_TASK(se_cmd)->t_task_list, t_list) break; @@ -675,15 +675,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) * a $FABRIC_MOD. In that case, report LUN=0 only. */ if (!(se_sess)) { - lun = 0; - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); lun_count = 1; goto done; } @@ -703,15 +695,8 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) if ((cdb_offset + 8) >= se_cmd->data_length) continue; - lun = cpu_to_be64(CMD_TFO(se_cmd)->pack_lun(deve->mapped_lun)); - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + offset += 8; cdb_offset += 8; } spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 7ff6a35f26ac..331d423fd0e0 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -41,7 +41,7 @@ #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_host.h> -#include <scsi/libsas.h> /* For TASK_ATTR_* */ +#include <scsi/scsi_tcq.h> #include <target/target_core_base.h> #include <target/target_core_device.h> @@ -911,7 +911,7 @@ static int pscsi_do_task(struct se_task *task) * descriptor */ blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, pt->pscsi_req, - (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ), + (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); return PYX_TRANSPORT_SENT_TO_TRANSPORT; diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 4a109835e420..59b8b9c5ad72 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -55,7 +55,8 @@ struct se_tmr_req *core_tmr_alloc_req( { struct se_tmr_req *tmr; - tmr = kmem_cache_zalloc(se_tmr_req_cache, GFP_KERNEL); + tmr = kmem_cache_zalloc(se_tmr_req_cache, (in_interrupt()) ? + GFP_ATOMIC : GFP_KERNEL); if (!(tmr)) { printk(KERN_ERR "Unable to allocate struct se_tmr_req\n"); return ERR_PTR(-ENOMEM); @@ -398,9 +399,9 @@ int core_tmr_lun_reset( printk(KERN_INFO "LUN_RESET: SCSI-2 Released reservation\n"); } - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_resets++; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); DEBUG_LR("LUN_RESET: %s for [%s] Complete\n", (preempt_and_abort_list) ? "Preempt" : "TMR", diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b9d3501bdd91..4dafeb8b5638 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -42,7 +42,7 @@ #include <net/tcp.h> #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> -#include <scsi/libsas.h> /* For TASK_ATTR_* */ +#include <scsi/scsi_tcq.h> #include <target/target_core_base.h> #include <target/target_core_device.h> @@ -762,7 +762,6 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) transport_all_task_dev_remove_state(cmd); spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); - transport_free_dev_tasks(cmd); check_lun: spin_lock_irqsave(&lun->lun_cmd_lock, flags); @@ -1075,7 +1074,7 @@ static inline int transport_add_task_check_sam_attr( * head of the struct se_device->execute_task_list, and task_prev * after that for each subsequent task */ - if (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG) { list_add(&task->t_execute_list, (task_prev != NULL) ? &task_prev->t_execute_list : @@ -1195,6 +1194,7 @@ transport_get_task_from_execute_queue(struct se_device *dev) break; list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); return task; @@ -1210,8 +1210,14 @@ void transport_remove_task_from_execute_queue( { unsigned long flags; + if (atomic_read(&task->task_execute_queue) == 0) { + dump_stack(); + return; + } + spin_lock_irqsave(&dev->execute_task_lock, flags); list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); spin_unlock_irqrestore(&dev->execute_task_lock, flags); } @@ -1867,7 +1873,7 @@ static int transport_check_alloc_task_attr(struct se_cmd *cmd) if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) return 0; - if (cmd->sam_task_attr == TASK_ATTR_ACA) { + if (cmd->sam_task_attr == MSG_ACA_TAG) { DEBUG_STA("SAM Task Attribute ACA" " emulation is not supported\n"); return -1; @@ -2058,6 +2064,13 @@ int transport_generic_handle_tmr( } EXPORT_SYMBOL(transport_generic_handle_tmr); +void transport_generic_free_cmd_intr( + struct se_cmd *cmd) +{ + transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR); +} +EXPORT_SYMBOL(transport_generic_free_cmd_intr); + static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) { struct se_task *task, *task_tmp; @@ -2504,7 +2517,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * Check for the existence of HEAD_OF_QUEUE, and if true return 1 * to allow the passed struct se_cmd list of tasks to the front of the list. */ - if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_inc(&SE_DEV(cmd)->dev_hoq_count); smp_mb__after_atomic_inc(); DEBUG_STA("Added HEAD_OF_QUEUE for CDB:" @@ -2512,7 +2525,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) T_TASK(cmd)->t_task_cdb[0], cmd->se_ordered_id); return 1; - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&SE_DEV(cmd)->ordered_cmd_lock); list_add_tail(&cmd->se_ordered_list, &SE_DEV(cmd)->ordered_cmd_list); @@ -3411,7 +3424,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; case READ_BUFFER: @@ -3619,7 +3632,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; default: @@ -3777,21 +3790,21 @@ static void transport_complete_task_attr(struct se_cmd *cmd) struct se_cmd *cmd_p, *cmd_tmp; int new_active_tasks = 0; - if (cmd->sam_task_attr == TASK_ATTR_SIMPLE) { + if (cmd->sam_task_attr == MSG_SIMPLE_TAG) { atomic_dec(&dev->simple_cmds); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev->dev_cur_ordered_id: %u for" " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_dec(&dev->dev_hoq_count); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&dev->ordered_cmd_lock); list_del(&cmd->se_ordered_list); atomic_dec(&dev->dev_ordered_sync); @@ -3824,7 +3837,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd) new_active_tasks++; spin_lock(&dev->delayed_cmd_lock); - if (cmd_p->sam_task_attr == TASK_ATTR_ORDERED) + if (cmd_p->sam_task_attr == MSG_ORDERED_TAG) break; } spin_unlock(&dev->delayed_cmd_lock); @@ -4776,18 +4789,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_end_cur->page_link &= ~0x02; sg_chain(sg_head, task_sg_num, sg_head_cur); - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_chain(sg_head, task_sg_num, sg_head_cur); + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } sg_head = sg_head_cur; sg_link = sg_link_cur; - task_sg_num = task->task_sg_num; continue; } sg_head = sg_first = &task->task_sg[0]; sg_link = &task->task_sg[task->task_sg_num]; - task_sg_num = task->task_sg_num; /* * Check for single task.. */ @@ -4798,9 +4813,12 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) */ sg_end = &task->task_sg[task->task_sg_num - 1]; sg_end->page_link &= ~0x02; - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4809,21 +4827,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) T_TASK(cmd)->t_tasks_sg_chained = sg_first; T_TASK(cmd)->t_tasks_sg_chained_no = sg_count; - DEBUG_CMD_M("Setup T_TASK(cmd)->t_tasks_sg_chained: %p and" - " t_tasks_sg_chained_no: %u\n", T_TASK(cmd)->t_tasks_sg_chained, + DEBUG_CMD_M("Setup cmd: %p T_TASK(cmd)->t_tasks_sg_chained: %p and" + " t_tasks_sg_chained_no: %u\n", cmd, T_TASK(cmd)->t_tasks_sg_chained, T_TASK(cmd)->t_tasks_sg_chained_no); for_each_sg(T_TASK(cmd)->t_tasks_sg_chained, sg, T_TASK(cmd)->t_tasks_sg_chained_no, i) { - DEBUG_CMD_M("SG: %p page: %p length: %d offset: %d\n", - sg, sg_page(sg), sg->length, sg->offset); + DEBUG_CMD_M("SG[%d]: %p page: %p length: %d offset: %d, magic: 0x%08x\n", + i, sg, sg_page(sg), sg->length, sg->offset, sg->sg_magic); if (sg_is_chain(sg)) DEBUG_CMD_M("SG: %p sg_is_chain=1\n", sg); if (sg_is_last(sg)) DEBUG_CMD_M("SG: %p sg_is_last=1\n", sg); } - } EXPORT_SYMBOL(transport_do_task_sg_chain); @@ -5297,6 +5314,8 @@ void transport_generic_free_cmd( if (wait_for_tasks && cmd->transport_wait_for_tasks) cmd->transport_wait_for_tasks(cmd, 0, 0); + transport_free_dev_tasks(cmd); + transport_generic_remove(cmd, release_to_pool, session_reinstatement); } @@ -6132,6 +6151,9 @@ get_cmd: case TRANSPORT_REMOVE: transport_generic_remove(cmd, 1, 0); break; + case TRANSPORT_FREE_CMD_INTR: + transport_generic_free_cmd(cmd, 0, 1, 0); + break; case TRANSPORT_PROCESS_TMR: transport_generic_do_tmr(cmd); break; diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 49e51778f733..c056a1132ae1 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -35,6 +35,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> +#include <scsi/scsi_tcq.h> #include <scsi/libfc.h> #include <scsi/fc_encode.h> @@ -592,8 +593,25 @@ static void ft_send_cmd(struct ft_cmd *cmd) case FCP_CFL_WRDATA | FCP_CFL_RDDATA: goto err; /* TBD not supported by tcm_fc yet */ } + /* + * Locate the SAM Task Attr from fc_pri_ta + */ + switch (fcp->fc_pri_ta & FCP_PTA_MASK) { + case FCP_PTA_HEADQ: + task_attr = MSG_HEAD_TAG; + break; + case FCP_PTA_ORDERED: + task_attr = MSG_ORDERED_TAG; + break; + case FCP_PTA_ACA: + task_attr = MSG_ACA_TAG; + break; + case FCP_PTA_SIMPLE: /* Fallthrough */ + default: + task_attr = MSG_SIMPLE_TAG; + } + - /* FCP_PTA_ maps 1:1 to TASK_ATTR_ */ task_attr = fcp->fc_pri_ta & FCP_PTA_MASK; data_len = ntohl(fcp->fc_dl); cmd->cdb = fcp->fc_cdb; diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index fcdbbffe88cc..84e868c255dd 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -519,13 +519,6 @@ static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg) return tpg->index; } -static u64 ft_pack_lun(unsigned int index) -{ - WARN_ON(index >= 256); - /* Caller wants this byte-swapped */ - return cpu_to_le64((index & 0xff) << 8); -} - static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_name = ft_get_fabric_name, .get_fabric_proto_ident = fc_get_fabric_proto_ident, @@ -564,7 +557,6 @@ static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_sense_len = ft_get_fabric_sense_len, .set_fabric_sense_len = ft_set_fabric_sense_len, .is_state_remove = ft_is_state_remove, - .pack_lun = ft_pack_lun, /* * Setup function pointers for generic logic in * target_core_fabric_configfs.c |
