diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/amba/tegra-ahb.c | 6 | ||||
| -rw-r--r-- | drivers/clk/Makefile | 1 | ||||
| -rw-r--r-- | drivers/clk/clk-nomadik.c | 47 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-tegra.c | 5 |
4 files changed, 52 insertions, 7 deletions
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c index aa0b1f160528..0b6f0b28a487 100644 --- a/drivers/amba/tegra-ahb.c +++ b/drivers/amba/tegra-ahb.c @@ -264,11 +264,6 @@ static int __devinit tegra_ahb_probe(struct platform_device *pdev) return 0; } -static int __devexit tegra_ahb_remove(struct platform_device *pdev) -{ - return 0; -} - static const struct of_device_id tegra_ahb_of_match[] __devinitconst = { { .compatible = "nvidia,tegra30-ahb", }, { .compatible = "nvidia,tegra20-ahb", }, @@ -277,7 +272,6 @@ static const struct of_device_id tegra_ahb_of_match[] __devinitconst = { static struct platform_driver tegra_ahb_driver = { .probe = tegra_ahb_probe, - .remove = __devexit_p(tegra_ahb_remove), .driver = { .name = DRV_NAME, .owner = THIS_MODULE, diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index b9a5158a30b1..26b6b92942e1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o # SoCs specific +obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_MXS) += mxs/ obj-$(CONFIG_PLAT_SPEAR) += spear/ diff --git a/drivers/clk/clk-nomadik.c b/drivers/clk/clk-nomadik.c new file mode 100644 index 000000000000..517a8ff7121e --- /dev/null +++ b/drivers/clk/clk-nomadik.c @@ -0,0 +1,47 @@ +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/clk-provider.h> + +/* + * The Nomadik clock tree is described in the STN8815A12 DB V4.2 + * reference manual for the chip, page 94 ff. + */ + +void __init nomadik_clk_init(void) +{ + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); + clk_register_clkdev(clk, "apb_pclk", NULL); + clk_register_clkdev(clk, NULL, "gpio.0"); + clk_register_clkdev(clk, NULL, "gpio.1"); + clk_register_clkdev(clk, NULL, "gpio.2"); + clk_register_clkdev(clk, NULL, "gpio.3"); + clk_register_clkdev(clk, NULL, "rng"); + + /* + * The 2.4 MHz TIMCLK reference clock is active at boot time, this is + * actually the MXTALCLK @19.2 MHz divided by 8. This clock is used + * by the timers and watchdog. See page 105 ff. + */ + clk = clk_register_fixed_rate(NULL, "TIMCLK", NULL, CLK_IS_ROOT, + 2400000); + clk_register_clkdev(clk, NULL, "mtu0"); + clk_register_clkdev(clk, NULL, "mtu1"); + + /* + * At boot time, PLL2 is set to generate a set of fixed clocks, + * one of them is CLK48, the 48 MHz clock, routed to the UART, MMC/SD + * I2C, IrDA, USB and SSP blocks. + */ + clk = clk_register_fixed_rate(NULL, "CLK48", NULL, CLK_IS_ROOT, + 48000000); + clk_register_clkdev(clk, NULL, "uart0"); + clk_register_clkdev(clk, NULL, "uart1"); + clk_register_clkdev(clk, NULL, "mmci"); + clk_register_clkdev(clk, NULL, "ssp"); + clk_register_clkdev(clk, NULL, "nmk-i2c.0"); + clk_register_clkdev(clk, NULL, "nmk-i2c.1"); +} diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index b38d8a78f6a0..6e5338a071ce 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -223,6 +223,7 @@ static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata( { struct tegra_sdhci_platform_data *plat; struct device_node *np = pdev->dev.of_node; + u32 bus_width; if (!np) return NULL; @@ -236,7 +237,9 @@ static struct tegra_sdhci_platform_data * __devinit sdhci_tegra_dt_parse_pdata( plat->cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); plat->wp_gpio = of_get_named_gpio(np, "wp-gpios", 0); plat->power_gpio = of_get_named_gpio(np, "power-gpios", 0); - if (of_find_property(np, "support-8bit", NULL)) + + if (of_property_read_u32(np, "bus-width", &bus_width) == 0 && + bus_width == 8) plat->is_8bit = 1; return plat; |
