diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ata/libata-core.c | 32 |
1 files changed, 19 insertions, 13 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 76aa94f55af9..047eabd75363 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3061,22 +3061,28 @@ static int ata_bus_post_reset(struct ata_port *ap, unsigned int devmask, } } - /* if device 1 was found in ata_devchk, wait for - * register access, then wait for BSY to clear + /* if device 1 was found in ata_devchk, wait for register + * access briefly, then wait for BSY to clear. */ - while (dev1) { - u8 nsect, lbal; + if (dev1) { + int i; ap->ops->dev_select(ap, 1); - nsect = ioread8(ioaddr->nsect_addr); - lbal = ioread8(ioaddr->lbal_addr); - if ((nsect == 1) && (lbal == 1)) - break; - if (time_after(jiffies, deadline)) - return -EBUSY; - msleep(50); /* give drive a breather */ - } - if (dev1) { + + /* Wait for register access. Some ATAPI devices fail + * to set nsect/lbal after reset, so don't waste too + * much time on it. We're gonna wait for !BSY anyway. + */ + for (i = 0; i < 2; i++) { + u8 nsect, lbal; + + nsect = ioread8(ioaddr->nsect_addr); + lbal = ioread8(ioaddr->lbal_addr); + if ((nsect == 1) && (lbal == 1)) + break; + msleep(50); /* give drive a breather */ + } + rc = ata_wait_ready(ap, deadline); if (rc) { if (rc != -ENODEV) |
