diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/message/fusion/mptbase.c | 449 | ||||
| -rw-r--r-- | drivers/message/fusion/mptbase.h | 28 | ||||
| -rw-r--r-- | drivers/message/fusion/mptctl.c | 4 | ||||
| -rw-r--r-- | drivers/message/fusion/mptfc.c | 2 | ||||
| -rw-r--r-- | drivers/message/fusion/mptlan.c | 7 | ||||
| -rw-r--r-- | drivers/message/fusion/mptsas.c | 2 | ||||
| -rw-r--r-- | drivers/message/fusion/mptscsih.c | 447 | ||||
| -rw-r--r-- | drivers/message/fusion/mptscsih.h | 8 | ||||
| -rw-r--r-- | drivers/message/fusion/mptspi.c | 2 |
9 files changed, 549 insertions, 400 deletions
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index 14d62d96ca41..790a2932ded9 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -135,7 +135,6 @@ static void mpt_adapter_dispose(MPT_ADAPTER *ioc); static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc); static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag); -//static u32 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked); static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason); static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag); static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag); @@ -178,6 +177,7 @@ static int ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t * static void mpt_sp_ioc_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf); static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info); static void mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info); +static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info); /* module entry point */ static int __init fusion_init (void); @@ -209,6 +209,144 @@ pci_enable_io_access(struct pci_dev *pdev) pci_write_config_word(pdev, PCI_COMMAND, command_reg); } +/* + * Process turbo (context) reply... + */ +static void +mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa) +{ + MPT_FRAME_HDR *mf = NULL; + MPT_FRAME_HDR *mr = NULL; + int req_idx = 0; + int cb_idx; + + dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", + ioc->name, pa)); + + switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) { + case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT: + req_idx = pa & 0x0000FFFF; + cb_idx = (pa & 0x00FF0000) >> 16; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + break; + case MPI_CONTEXT_REPLY_TYPE_LAN: + cb_idx = mpt_lan_index; + /* + * Blind set of mf to NULL here was fatal + * after lan_reply says "freeme" + * Fix sort of combined with an optimization here; + * added explicit check for case where lan_reply + * was just returning 1 and doing nothing else. + * For this case skip the callback, but set up + * proper mf value first here:-) + */ + if ((pa & 0x58000000) == 0x58000000) { + req_idx = pa & 0x0000FFFF; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + mpt_free_msg_frame(ioc, mf); + mb(); + return; + break; + } + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + break; + case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET: + cb_idx = mpt_stm_index; + mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); + break; + default: + cb_idx = 0; + BUG(); + } + + /* Check for (valid) IO callback! */ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || + MptCallbacks[cb_idx] == NULL) { + printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", + __FUNCTION__, ioc->name, cb_idx); + goto out; + } + + if (MptCallbacks[cb_idx](ioc, mf, mr)) + mpt_free_msg_frame(ioc, mf); + out: + mb(); +} + +static void +mpt_reply(MPT_ADAPTER *ioc, u32 pa) +{ + MPT_FRAME_HDR *mf; + MPT_FRAME_HDR *mr; + int req_idx; + int cb_idx; + int freeme; + + u32 reply_dma_low; + u16 ioc_stat; + + /* non-TURBO reply! Hmmm, something may be up... + * Newest turbo reply mechanism; get address + * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! + */ + + /* Map DMA address of reply header to cpu address. + * pa is 32 bits - but the dma address may be 32 or 64 bits + * get offset based only only the low addresses + */ + + reply_dma_low = (pa <<= 1); + mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + + (reply_dma_low - ioc->reply_frames_low_dma)); + + req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); + cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; + mf = MPT_INDEX_2_MFPTR(ioc, req_idx); + + dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", + ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); + DBG_DUMP_REPLY_FRAME(mr) + + /* Check/log IOC log info + */ + ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); + if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { + u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); + if (ioc->bus_type == FC) + mpt_fc_log_info(ioc, log_info); + else if (ioc->bus_type == SCSI) + mpt_sp_log_info(ioc, log_info); + else if (ioc->bus_type == SAS) + mpt_sas_log_info(ioc, log_info); + } + if (ioc_stat & MPI_IOCSTATUS_MASK) { + if (ioc->bus_type == SCSI && + cb_idx != mpt_stm_index && + cb_idx != mpt_lan_index) + mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); + } + + + /* Check for (valid) IO callback! */ + if (cb_idx < 1 || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS || + MptCallbacks[cb_idx] == NULL) { + printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n", + __FUNCTION__, ioc->name, cb_idx); + freeme = 0; + goto out; + } + + freeme = MptCallbacks[cb_idx](ioc, mf, mr); + + out: + /* Flush (non-TURBO) reply with a WRITE! */ + CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); + + if (freeme) + mpt_free_msg_frame(ioc, mf); + mb(); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_interrupt - MPT adapter (IOC) specific interrupt handler. @@ -230,164 +368,21 @@ pci_enable_io_access(struct pci_dev *pdev) static irqreturn_t mpt_interrupt(int irq, void *bus_id, struct pt_regs *r) { - MPT_ADAPTER *ioc; - MPT_FRAME_HDR *mf; - MPT_FRAME_HDR *mr; - u32 pa; - int req_idx; - int cb_idx; - int type; - int freeme; - - ioc = (MPT_ADAPTER *)bus_id; + MPT_ADAPTER *ioc = bus_id; + u32 pa; /* * Drain the reply FIFO! - * - * NOTES: I've seen up to 10 replies processed in this loop, so far... - * Update: I've seen up to 9182 replies processed in this loop! ?? - * Update: Limit ourselves to processing max of N replies - * (bottom of loop). */ while (1) { - - if ((pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo)) == 0xFFFFFFFF) + pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo); + if (pa == 0xFFFFFFFF) return IRQ_HANDLED; - - cb_idx = 0; - freeme = 0; - - /* - * Check for non-TURBO reply! - */ - if (pa & MPI_ADDRESS_REPLY_A_BIT) { - u32 reply_dma_low; - u16 ioc_stat; - - /* non-TURBO reply! Hmmm, something may be up... - * Newest turbo reply mechanism; get address - * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)! - */ - - /* Map DMA address of reply header to cpu address. - * pa is 32 bits - but the dma address may be 32 or 64 bits - * get offset based only only the low addresses - */ - reply_dma_low = (pa = (pa << 1)); - mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames + - (reply_dma_low - ioc->reply_frames_low_dma)); - - req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx); - cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - - dmfprintk((MYIOC_s_INFO_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n", - ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function)); - DBG_DUMP_REPLY_FRAME(mr) - - /* Check/log IOC log info - */ - ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus); - if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { - u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo); - if (ioc->bus_type == FC) - mpt_fc_log_info(ioc, log_info); - else if (ioc->bus_type == SCSI) - mpt_sp_log_info(ioc, log_info); - } - if (ioc_stat & MPI_IOCSTATUS_MASK) { - if (ioc->bus_type == SCSI) - mpt_sp_ioc_info(ioc, (u32)ioc_stat, mf); - } - } else { - /* - * Process turbo (context) reply... - */ - dmfprintk((MYIOC_s_INFO_FMT "Got TURBO reply req_idx=%08x\n", ioc->name, pa)); - type = (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT); - if (type == MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET) { - cb_idx = mpt_stm_index; - mf = NULL; - mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); - } else if (type == MPI_CONTEXT_REPLY_TYPE_LAN) { - cb_idx = mpt_lan_index; - /* Blind set of mf to NULL here was fatal - * after lan_reply says "freeme" - * Fix sort of combined with an optimization here; - * added explicit check for case where lan_reply - * was just returning 1 and doing nothing else. - * For this case skip the callback, but set up - * proper mf value first here:-) - */ - if ((pa & 0x58000000) == 0x58000000) { - req_idx = pa & 0x0000FFFF; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - freeme = 1; - /* - * IMPORTANT! Invalidate the callback! - */ - cb_idx = 0; - } else { - mf = NULL; - } - mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa); - } else { - req_idx = pa & 0x0000FFFF; - cb_idx = (pa & 0x00FF0000) >> 16; - mf = MPT_INDEX_2_MFPTR(ioc, req_idx); - mr = NULL; - } - pa = 0; /* No reply flush! */ - } - -#ifdef MPT_DEBUG_IRQ - if (ioc->bus_type == SCSI) { - /* Verify mf, mr are reasonable. - */ - if ((mf) && ((mf >= MPT_INDEX_2_MFPTR(ioc, ioc->req_depth)) - || (mf < ioc->req_frames)) ) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid mf (%p)!\n", ioc->name, (void *)mf); - cb_idx = 0; - pa = 0; - freeme = 0; - } - if ((pa) && (mr) && ((mr >= MPT_INDEX_2_RFPTR(ioc, ioc->req_depth)) - || (mr < ioc->reply_frames)) ) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid rf (%p)!\n", ioc->name, (void *)mr); - cb_idx = 0; - pa = 0; - freeme = 0; - } - if (cb_idx > (MPT_MAX_PROTOCOL_DRIVERS-1)) { - printk(MYIOC_s_WARN_FMT - "mpt_interrupt: Invalid cb_idx (%d)!\n", ioc->name, cb_idx); - cb_idx = 0; - pa = 0; - freeme = 0; - } - } -#endif - - /* Check for (valid) IO callback! */ - if (cb_idx) { - /* Do the callback! */ - freeme = (*(MptCallbacks[cb_idx]))(ioc, mf, mr); - } - - if (pa) { - /* Flush (non-TURBO) reply with a WRITE! */ - CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa); - } - - if (freeme) { - /* Put Request back on FreeQ! */ - mpt_free_msg_frame(ioc, mf); - } - - mb(); - } /* drain reply FIFO */ + else if (pa & MPI_ADDRESS_REPLY_A_BIT) + mpt_reply(ioc, pa); + else + mpt_turbo_reply(ioc, pa); + } return IRQ_HANDLED; } @@ -1065,7 +1060,7 @@ mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init) ioc->name, ioc->HostPageBuffer, ioc->HostPageBuffer_dma, - hst_page_buffer_sz)); + host_page_buffer_sz)); ioc->alloc_total += host_page_buffer_sz; ioc->HostPageBuffer_sz = host_page_buffer_sz; break; @@ -1208,7 +1203,7 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) /* Initilize SCSI Config Data structure */ - memset(&ioc->spi_data, 0, sizeof(ScsiCfgData)); + memset(&ioc->spi_data, 0, sizeof(SpiCfgData)); /* Initialize the running configQ head. */ @@ -1755,8 +1750,23 @@ mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag) */ if (ret == 0) { rc = mpt_do_upload(ioc, sleepFlag); - if (rc != 0) + if (rc == 0) { + if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) { + /* + * Maintain only one pointer to FW memory + * so there will not be two attempt to + * downloadboot onboard dual function + * chips (mpt_adapter_disable, + * mpt_diag_reset) + */ + ioc->cached_fw = NULL; + ddlprintk((MYIOC_s_INFO_FMT ": mpt_upload: alt_%s has cached_fw=%p \n", + ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw)); + } + } else { printk(KERN_WARNING MYNAM ": firmware upload failure!\n"); + ret = -5; + } } } } @@ -1997,9 +2007,9 @@ mpt_adapter_disable(MPT_ADAPTER *ioc) } kfree(ioc->spi_data.nvram); - kfree(ioc->spi_data.pIocPg3); + kfree(ioc->raid_data.pIocPg3); ioc->spi_data.nvram = NULL; - ioc->spi_data.pIocPg3 = NULL; + ioc->raid_data.pIocPg3 = NULL; if (ioc->spi_data.pIocPg4 != NULL) { sz = ioc->spi_data.IocPg4Sz; @@ -3852,7 +3862,7 @@ WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag) int count = 0; u32 intstat=0; - cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + cntdn = 1000 * howlong; if (sleepFlag == CAN_SLEEP) { while (--cntdn) { @@ -3902,7 +3912,7 @@ WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag) int count = 0; u32 intstat=0; - cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * howlong; + cntdn = 1000 * howlong; if (sleepFlag == CAN_SLEEP) { while (--cntdn) { intstat = CHIPREG_READ32(&ioc->chip->IntStatus); @@ -4634,10 +4644,10 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) if (mpt_config(ioc, &cfg) != 0) goto done_and_free; - if ( (mem = (u8 *)ioc->spi_data.pIocPg2) == NULL ) { + if ( (mem = (u8 *)ioc->raid_data.pIocPg2) == NULL ) { mem = kmalloc(iocpage2sz, GFP_ATOMIC); if (mem) { - ioc->spi_data.pIocPg2 = (IOCPage2_t *) mem; + ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem; } else { goto done_and_free; } @@ -4654,7 +4664,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) /* At least 1 RAID Volume */ pIocRv = pIoc2->RaidVolume; - ioc->spi_data.isRaid = 0; + ioc->raid_data.isRaid = 0; for (jj = 0; jj < nVols; jj++, pIocRv++) { vid = pIocRv->VolumeID; vbus = pIocRv->VolumeBus; @@ -4663,7 +4673,7 @@ mpt_findImVolumes(MPT_ADAPTER *ioc) /* find the match */ if (vbus == 0) { - ioc->spi_data.isRaid |= (1 << vid); + ioc->raid_data.isRaid |= (1 << vid); } else { /* Error! Always bus 0 */ @@ -4698,8 +4708,8 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) /* Free the old page */ - kfree(ioc->spi_data.pIocPg3); - ioc->spi_data.pIocPg3 = NULL; + kfree(ioc->raid_data.pIocPg3); + ioc->raid_data.pIocPg3 = NULL; /* There is at least one physical disk. * Read and save IOC Page 3 @@ -4736,7 +4746,7 @@ mpt_read_ioc_pg_3(MPT_ADAPTER *ioc) mem = kmalloc(iocpage3sz, GFP_ATOMIC); if (mem) { memcpy(mem, (u8 *)pIoc3, iocpage3sz); - ioc->spi_data.pIocPg3 = (IOCPage3_t *) mem; + ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem; } } @@ -6022,6 +6032,111 @@ mpt_sp_log_info(MPT_ADAPTER *ioc, u32 log_info) printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc); } +/* strings for sas loginfo */ + static char *originator_str[] = { + "IOP", /* 00h */ + "PL", /* 01h */ + "IR" /* 02h */ + }; + static char *iop_code_str[] = { + NULL, /* 00h */ + "Invalid SAS Address", /* 01h */ + NULL, /* 02h */ + "Invalid Page", /* 03h */ + NULL, /* 04h */ + "Task Terminated" /* 05h */ + }; + static char *pl_code_str[] = { + NULL, /* 00h */ + "Open Failure", /* 01h */ + "Invalid Scatter Gather List", /* 02h */ + "Wrong Relative Offset or Frame Length", /* 03h */ + "Frame Transfer Error", /* 04h */ + "Transmit Frame Connected Low", /* 05h */ + "SATA Non-NCQ RW Error Bit Set", /* 06h */ + "SATA Read Log Receive Data Error", /* 07h */ + "SATA NCQ Fail All Commands After Error", /* 08h */ + "SATA Error in Receive Set Device Bit FIS", /* 09h */ + "Receive Frame Invalid Message", /* 0Ah */ + "Receive Context Message Valid Error", /* 0Bh */ + "Receive Frame Current Frame Error", /* 0Ch */ + "SATA Link Down", /* 0Dh */ + "Discovery SATA Init W IOS", /* 0Eh */ + "Config Invalid Page", /* 0Fh */ + "Discovery SATA Init Timeout", /* 10h */ + "Reset", /* 11h */ + "Abort", /* 12h */ + "IO Not Yet Executed", /* 13h */ + "IO Executed", /* 14h */ + NULL, /* 15h */ + NULL, /* 16h */ + NULL, /* 17h */ + NULL, /* 18h */ + NULL, /* 19h */ + NULL, /* 1Ah */ + NULL, /* 1Bh */ + NULL, /* 1Ch */ + NULL, /* 1Dh */ + NULL, /* 1Eh */ + NULL, /* 1Fh */ + "Enclosure Management" /* 20h */ + }; + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* + * mpt_sas_log_info - Log information returned from SAS IOC. + * @ioc: Pointer to MPT_ADAPTER structure + * @log_info: U32 LogInfo reply word from the IOC + * + * Refer to lsi/mpi_log_sas.h. + */ +static void +mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info) +{ +union loginfo_type { + u32 loginfo; + struct { + u32 subcode:16; + u32 code:8; + u32 originator:4; + u32 bus_type:4; + }dw; +}; + union loginfo_type sas_loginfo; + char *code_desc = NULL; + + sas_loginfo.loginfo = log_info; + if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) && + (sas_loginfo.dw.originator < sizeof(originator_str)/sizeof(char*))) + return; + if ((sas_loginfo.dw.originator == 0 /*IOP*/) && + (sas_loginfo.dw.code < sizeof(iop_code_str)/sizeof(char*))) { + code_desc = iop_code_str[sas_loginfo.dw.code]; + }else if ((sas_loginfo.dw.originator == 1 /*PL*/) && + (sas_loginfo.dw.code < sizeof(pl_code_str)/sizeof(char*) )) { + code_desc = pl_code_str[sas_loginfo.dw.code]; + } + + if (code_desc != NULL) + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code={%s}," + " SubCode(0x%04x)\n", + ioc->name, + log_info, + originator_str[sas_loginfo.dw.originator], + code_desc, + sas_loginfo.dw.subcode); + else + printk(MYIOC_s_INFO_FMT + "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x)," + " SubCode(0x%04x)\n", + ioc->name, + log_info, + originator_str[sas_loginfo.dw.originator], + sas_loginfo.dw.code, + sas_loginfo.dw.subcode); +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * mpt_sp_ioc_info - IOC information returned from SCSI Parallel IOC. diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h index bbd21d74ce5c..75105277e22f 100644 --- a/drivers/message/fusion/mptbase.h +++ b/drivers/message/fusion/mptbase.h @@ -77,8 +77,8 @@ #define COPYRIGHT "Copyright (c) 1999-2005 " MODULEAUTHOR #endif -#define MPT_LINUX_VERSION_COMMON "3.03.02" -#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.02" +#define MPT_LINUX_VERSION_COMMON "3.03.03" +#define MPT_LINUX_PACKAGE_NAME "@(#)mptlinux-3.03.03" #define WHAT_MAGIC_STRING "@" "(" "#" ")" #define show_mptmod_ver(s,ver) \ @@ -424,7 +424,7 @@ typedef struct _MPT_IOCTL { /* * Event Structure and define */ -#define MPTCTL_EVENT_LOG_SIZE (0x0000000A) +#define MPTCTL_EVENT_LOG_SIZE (0x000000032) typedef struct _mpt_ioctl_events { u32 event; /* Specified by define above */ u32 eventContext; /* Index or counter */ @@ -452,16 +452,13 @@ typedef struct _mpt_ioctl_events { #define MPT_SCSICFG_ALL_IDS 0x02 /* WriteSDP1 to all IDS */ /* #define MPT_SCSICFG_BLK_NEGO 0x10 WriteSDP1 with WDTR and SDTR disabled */ -typedef struct _ScsiCfgData { +typedef struct _SpiCfgData { u32 PortFlags; int *nvram; /* table of device NVRAM values */ - IOCPage2_t *pIocPg2; /* table of Raid Volumes */ - IOCPage3_t *pIocPg3; /* table of physical disks */ IOCPage4_t *pIocPg4; /* SEP devices addressing */ dma_addr_t IocPg4_dma; /* Phys Addr of IOCPage4 data */ int IocPg4Sz; /* IOCPage4 size */ u8 dvStatus[MPT_MAX_SCSI_DEVICES]; - int isRaid; /* bit field, 1 if RAID */ u8 minSyncFactor; /* 0xFF if async */ u8 maxSyncOffset; /* 0 if async */ u8 maxBusWidth; /* 0 if narrow, 1 if wide */ @@ -473,10 +470,14 @@ typedef struct _ScsiCfgData { u8 dvScheduled; /* 1 if scheduled */ u8 forceDv; /* 1 to force DV scheduling */ u8 noQas; /* Disable QAS for this adapter */ - u8 Saf_Te; /* 1 to force all Processors as SAF-TE if Inquiry data length is too short to check for SAF-TE */ + u8 Saf_Te; /* 1 to force all Processors as + * SAF-TE if Inquiry data length + * is too short to check for SAF-TE + */ u8 mpt_dv; /* command line option: enhanced=1, basic=0 */ + u8 bus_reset; /* 1 to allow bus reset */ u8 rsvd[1]; -} ScsiCfgData; +}SpiCfgData; typedef struct _SasCfgData { u8 ptClear; /* 1 to automatically clear the @@ -486,6 +487,12 @@ typedef struct _SasCfgData { */ }SasCfgData; +typedef struct _RaidCfgData { + IOCPage2_t *pIocPg2; /* table of Raid Volumes */ + IOCPage3_t *pIocPg3; /* table of physical disks */ + int isRaid; /* bit field, 1 if RAID */ +}RaidCfgData; + /* * Adapter Structure - pci_dev specific. Maximum: MPT_MAX_ADAPTERS */ @@ -546,7 +553,8 @@ typedef struct _MPT_ADAPTER struct pci_dev *pcidev; /* struct pci_dev pointer */ u8 __iomem *memmap; /* mmap address */ struct Scsi_Host *sh; /* Scsi Host pointer */ - ScsiCfgData spi_data; /* Scsi config. data */ + SpiCfgData spi_data; /* Scsi config. data */ + RaidCfgData raid_data; /* Raid config. data */ SasCfgData sas_data; /* Sas config. data */ MPT_IOCTL *ioctl; /* ioctl data pointer */ struct proc_dir_entry *ioc_dentry; diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c index 7577c2417e2e..cb2d59d5f5af 100644 --- a/drivers/message/fusion/mptctl.c +++ b/drivers/message/fusion/mptctl.c @@ -1326,7 +1326,7 @@ mptctl_gettargetinfo (unsigned long arg) */ if (hd && hd->Targets) { mpt_findImVolumes(ioc); - pIoc2 = ioc->spi_data.pIocPg2; + pIoc2 = ioc->raid_data.pIocPg2; for ( id = 0; id <= max_id; ) { if ( pIoc2 && pIoc2->NumActiveVolumes ) { if ( id == pIoc2->RaidVolume[0].VolumeID ) { @@ -1348,7 +1348,7 @@ mptctl_gettargetinfo (unsigned long arg) --maxWordsLeft; goto next_id; } else { - pIoc3 = ioc->spi_data.pIocPg3; + pIoc3 = ioc->raid_data.pIocPg3; for ( jj = 0; jj < pIoc3->NumPhysDisks; jj++ ) { if ( pIoc3->PhysDisk[jj].PhysDiskID == id ) goto next_id; diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 13771abea13f..a628be9bbbad 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -189,7 +189,7 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", ioc->name, ioc); - return -ENODEV; + return 0; } sh = scsi_host_alloc(&mptfc_driver_template, sizeof(MPT_SCSI_HOST)); diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index 52794be5a95c..ed3c891e388f 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -312,7 +312,12 @@ static int mpt_lan_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) { struct net_device *dev = ioc->netdev; - struct mpt_lan_priv *priv = netdev_priv(dev); + struct mpt_lan_priv *priv; + + if (dev == NULL) + return(1); + else + priv = netdev_priv(dev); dlprintk((KERN_INFO MYNAM ": IOC %s_reset routed to LAN driver!\n", reset_phase==MPT_IOC_SETUP_RESET ? "setup" : ( diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 0d9a192e1bd4..429820e48c69 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -980,7 +980,7 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping ioc=%p because SCSI Initiator mode " "is NOT enabled!\n", ioc->name, ioc); - return -ENODEV; + return 0; } sh = scsi_host_alloc(&mptsas_driver_template, sizeof(MPT_SCSI_HOST)); diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 58b5fdee009a..8dd25aac5355 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -93,8 +93,9 @@ typedef struct _BIG_SENSE_BUF { #define MPT_ICFLAG_BUF_CAP 0x01 /* ReadBuffer Read Capacity format */ #define MPT_ICFLAG_ECHO 0x02 /* ReadBuffer Echo buffer format */ -#define MPT_ICFLAG_PHYS_DISK 0x04 /* Any SCSI IO but do Phys Disk Format */ -#define MPT_ICFLAG_TAGGED_CMD 0x08 /* Do tagged IO */ +#define MPT_ICFLAG_EBOS 0x04 /* ReadBuffer Echo buffer has EBOS */ +#define MPT_ICFLAG_PHYS_DISK 0x08 /* Any SCSI IO but do Phys Disk Format */ +#define MPT_ICFLAG_TAGGED_CMD 0x10 /* Do tagged IO */ #define MPT_ICFLAG_DID_RESET 0x20 /* Bus Reset occurred with this command */ #define MPT_ICFLAG_RESERVED 0x40 /* Reserved has been issued */ @@ -159,6 +160,8 @@ int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR static int mptscsih_do_cmd(MPT_SCSI_HOST *hd, INTERNAL_CMD *iocmd); static int mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum); +static struct work_struct mptscsih_persistTask; + #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION static int mptscsih_do_raid(MPT_SCSI_HOST *hd, u8 action, INTERNAL_CMD *io); static void mptscsih_domainValidation(void *hd); @@ -167,6 +170,7 @@ static void mptscsih_qas_check(MPT_SCSI_HOST *hd, int id); static int mptscsih_doDv(MPT_SCSI_HOST *hd, int channel, int target); static void mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage); static void mptscsih_fillbuf(char *buffer, int size, int index, int width); +static void mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id); #endif void mptscsih_remove(struct pci_dev *); @@ -606,11 +610,24 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) xfer_cnt = le32_to_cpu(pScsiReply->TransferCount); sc->resid = sc->request_bufflen - xfer_cnt; + /* + * if we get a data underrun indication, yet no data was + * transferred and the SCSI status indicates that the + * command was never started, change the data underrun + * to success + */ + if (status == MPI_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 && + (scsi_status == MPI_SCSI_STATUS_BUSY || + scsi_status == MPI_SCSI_STATUS_RESERVATION_CONFLICT || + scsi_status == MPI_SCSI_STATUS_TASK_SET_FULL)) { + status = MPI_IOCSTATUS_SUCCESS; + } + dreplyprintk((KERN_NOTICE "Reply ha=%d id=%d lun=%d:\n" "IOCStatus=%04xh SCSIState=%02xh SCSIStatus=%02xh\n" "resid=%d bufflen=%d xfer_cnt=%d\n", ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], - status, scsi_state, scsi_status, sc->resid, + status, scsi_state, scsi_status, sc->resid, sc->request_bufflen, xfer_cnt)); if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) @@ -619,8 +636,11 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) /* * Look for + dump FCP ResponseInfo[]! */ - if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID) { - printk(KERN_NOTICE " FCP_ResponseInfo=%08xh\n", + if (scsi_state & MPI_SCSI_STATE_RESPONSE_INFO_VALID && + pScsiReply->ResponseInfo) { + printk(KERN_NOTICE "ha=%d id=%d lun=%d: " + "FCP_ResponseInfo=%08xh\n", + ioc->id, pScsiReq->TargetID, pScsiReq->LUN[1], le32_to_cpu(pScsiReply->ResponseInfo)); } @@ -661,23 +681,13 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) break; case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */ - if ( xfer_cnt >= sc->underflow ) { - /* Sufficient data transfer occurred */ + sc->resid = sc->request_bufflen - xfer_cnt; + if((xfer_cnt==0)||(sc->underflow > xfer_cnt)) + sc->result=DID_SOFT_ERROR << 16; + else /* Sufficient data transfer occurred */ sc->result = (DID_OK << 16) | scsi_status; - } else if ( xfer_cnt == 0 ) { - /* A CRC Error causes this condition; retry */ - sc->result = (DRIVER_SENSE << 24) | (DID_OK << 16) | - (CHECK_CONDITION << 1); - sc->sense_buffer[0] = 0x70; - sc->sense_buffer[2] = NO_SENSE; - sc->sense_buffer[12] = 0; - sc->sense_buffer[13] = 0; - } else { - sc->result = DID_SOFT_ERROR << 16; - } - dreplyprintk((KERN_NOTICE - "RESIDUAL_MISMATCH: result=%x on id=%d\n", - sc->result, sc->device->id)); + dreplyprintk((KERN_NOTICE + "RESIDUAL_MISMATCH: result=%x on id=%d\n", sc->result, sc->device->id)); break; case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */ @@ -692,7 +702,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) ; } else { if (xfer_cnt < sc->underflow) { - sc->result = DID_SOFT_ERROR << 16; + if (scsi_status == SAM_STAT_BUSY) + sc->result = SAM_STAT_BUSY; + else + sc->result = DID_SOFT_ERROR << 16; } if (scsi_state & (MPI_SCSI_STATE_AUTOSENSE_FAILED | MPI_SCSI_STATE_NO_SCSI_STATUS)) { /* What to do? @@ -717,8 +730,10 @@ mptscsih_io_done(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *mr) case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */ case MPI_IOCSTATUS_SUCCESS: /* 0x0000 */ - scsi_status = pScsiReply->SCSIStatus; - sc->result = (DID_OK << 16) | scsi_status; + if (scsi_status == MPI_SCSI_STATUS_BUSY) + sc->result = (DID_BUS_BUSY << 16) | scsi_status; + else + sc->result = (DID_OK << 16) | scsi_status; if (scsi_state == 0) { ; } else if (scsi_state & MPI_SCSI_STATE_AUTOSENSE_VALID) { @@ -890,12 +905,13 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) SCSIIORequest_t *mf = NULL; int ii; int max = hd->ioc->req_depth; + struct scsi_cmnd *sc; dsprintk((KERN_INFO MYNAM ": search_running target %d lun %d max %d\n", target, lun, max)); for (ii=0; ii < max; ii++) { - if (hd->ScsiLookup[ii] != NULL) { + if ((sc = hd->ScsiLookup[ii]) != NULL) { mf = (SCSIIORequest_t *)MPT_INDEX_2_MFPTR(hd->ioc, ii); @@ -910,9 +926,22 @@ mptscsih_search_running_cmds(MPT_SCSI_HOST *hd, uint target, uint lun) hd->ScsiLookup[ii] = NULL; mptscsih_freeChainBuffers(hd->ioc, ii); mpt_free_msg_frame(hd->ioc, (MPT_FRAME_HDR *)mf); + if (sc->use_sg) { + pci_unmap_sg(hd->ioc->pcidev, + (struct scatterlist *) sc->request_buffer, + sc->use_sg, + sc->sc_data_direction); + } else if (sc->request_bufflen) { + pci_unmap_single(hd->ioc->pcidev, + sc->SCp.dma_handle, + sc->request_bufflen, + sc->sc_data_direction); + } + sc->host_scribble = NULL; + sc->result = DID_NO_CONNECT << 16; + sc->scsi_done(sc); } } - return; } @@ -967,8 +996,10 @@ mptscsih_remove(struct pci_dev *pdev) unsigned long flags; int sz1; - if(!host) + if(!host) { + mpt_detach(pdev); return; + } scsi_remove_host(host); @@ -1422,6 +1453,7 @@ mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) return 0; fail: + hd->ScsiLookup[my_idx] = NULL; mptscsih_freeChainBuffers(hd->ioc, my_idx); mpt_free_msg_frame(hd->ioc, mf); return SCSI_MLQUEUE_HOST_BUSY; @@ -1709,24 +1741,23 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) MPT_FRAME_HDR *mf; u32 ctx2abort; int scpnt_idx; + int retval; /* If we can't locate our host adapter structure, return FAILED status. */ if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL) { SCpnt->result = DID_RESET << 16; SCpnt->scsi_done(SCpnt); - dfailprintk((KERN_WARNING MYNAM ": mptscsih_abort: " + dfailprintk((KERN_INFO MYNAM ": mptscsih_abort: " "Can't locate host! (sc=%p)\n", SCpnt)); return FAILED; } ioc = hd->ioc; - if (hd->resetPending) + if (hd->resetPending) { return FAILED; - - printk(KERN_WARNING MYNAM ": %s: >> Attempting task abort! (sc=%p)\n", - hd->ioc->name, SCpnt); + } if (hd->timeouts < -1) hd->timeouts++; @@ -1734,16 +1765,20 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) /* Find this command */ if ((scpnt_idx = SCPNT_TO_LOOKUP_IDX(SCpnt)) < 0) { - /* Cmd not found in ScsiLookup. + /* Cmd not found in ScsiLookup. * Do OS callback. */ SCpnt->result = DID_RESET << 16; - dtmprintk((KERN_WARNING MYNAM ": %s: mptscsih_abort: " + dtmprintk((KERN_INFO MYNAM ": %s: mptscsih_abort: " "Command not in the active list! (sc=%p)\n", hd->ioc->name, SCpnt)); return SUCCESS; } + printk(KERN_WARNING MYNAM ": %s: attempting task abort! (sc=%p)\n", + hd->ioc->name, SCpnt); + scsi_print_command(SCpnt); + /* Most important! Set TaskMsgContext to SCpnt's MsgContext! * (the IO to be ABORT'd) * @@ -1756,38 +1791,22 @@ mptscsih_abort(struct scsi_cmnd * SCpnt) hd->abortSCpnt = SCpnt; - if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, + retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK, SCpnt->device->channel, SCpnt->device->id, SCpnt->device->lun, - ctx2abort, 2 /* 2 second timeout */) - < 0) { + ctx2abort, 2 /* 2 second timeout */); - /* The TM request failed and the subsequent FW-reload failed! - * Fatal error case. - */ - printk(MYIOC_s_WARN_FMT "Error issuing abort task! (sc=%p)\n", - hd->ioc->name, SCpnt); + printk (KERN_WARNING MYNAM ": %s: task abort: %s (sc=%p)\n", + hd->ioc->name, + ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); - /* We must clear our pending flag before clearing our state. - */ + if (retval == 0) + return SUCCESS; + + if(retval != FAILED ) { hd->tmPending = 0; hd->tmState = TM_STATE_NONE; - - /* Unmap the DMA buffers, if any. */ - if (SCpnt->use_sg) { - pci_unmap_sg(ioc->pcidev, (struct scatterlist *) SCpnt->request_buffer, - SCpnt->use_sg, SCpnt->sc_data_direction); - } else if (SCpnt->request_bufflen) { - pci_unmap_single(ioc->pcidev, SCpnt->SCp.dma_handle, - SCpnt->request_bufflen, SCpnt->sc_data_direction); - } - hd->ScsiLookup[scpnt_idx] = NULL; - SCpnt->result = DID_RESET << 16; - SCpnt->scsi_done(SCpnt); /* Issue the command callback */ - mptscsih_freeChainBuffers(ioc, scpnt_idx); - mpt_free_msg_frame(ioc, mf); - return FAILED; } - return SUCCESS; + return FAILED; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1803,11 +1822,12 @@ int mptscsih_dev_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; + int retval; /* If we can't locate our host adapter structure, return FAILED status. */ if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ - dtmprintk((KERN_WARNING MYNAM ": mptscsih_dev_reset: " + dtmprintk((KERN_INFO MYNAM ": mptscsih_dev_reset: " "Can't locate host! (sc=%p)\n", SCpnt)); return FAILED; @@ -1816,24 +1836,26 @@ mptscsih_dev_reset(struct scsi_cmnd * SCpnt) if (hd->resetPending) return FAILED; - printk(KERN_WARNING MYNAM ": %s: >> Attempting target reset! (sc=%p)\n", + printk(KERN_WARNING MYNAM ": %s: attempting target reset! (sc=%p)\n", hd->ioc->name, SCpnt); + scsi_print_command(SCpnt); - if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, + retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET, SCpnt->device->channel, SCpnt->device->id, - 0, 0, 5 /* 5 second timeout */) - < 0){ - /* The TM request failed and the subsequent FW-reload failed! - * Fatal error case. - */ - printk(MYIOC_s_WARN_FMT "Error processing TaskMgmt request (sc=%p)\n", - hd->ioc->name, SCpnt); + 0, 0, 5 /* 5 second timeout */); + + printk (KERN_WARNING MYNAM ": %s: target reset: %s (sc=%p)\n", + hd->ioc->name, + ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); + + if (retval == 0) + return SUCCESS; + + if(retval != FAILED ) { hd->tmPending = 0; hd->tmState = TM_STATE_NONE; - return FAILED; } - - return SUCCESS; + return FAILED; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -1849,41 +1871,39 @@ int mptscsih_bus_reset(struct scsi_cmnd * SCpnt) { MPT_SCSI_HOST *hd; - spinlock_t *host_lock = SCpnt->device->host->host_lock; + int retval; /* If we can't locate our host adapter structure, return FAILED status. */ if ((hd = (MPT_SCSI_HOST *) SCpnt->device->host->hostdata) == NULL){ - dtmprintk((KERN_WARNING MYNAM ": mptscsih_bus_reset: " + dtmprintk((KERN_INFO MYNAM ": mptscsih_bus_reset: " "Can't locate host! (sc=%p)\n", SCpnt ) ); return FAILED; } - printk(KERN_WARNING MYNAM ": %s: >> Attempting bus reset! (sc=%p)\n", + printk(KERN_WARNING MYNAM ": %s: attempting bus reset! (sc=%p)\n", hd->ioc->name, SCpnt); + scsi_print_command(SCpnt); if (hd->timeouts < -1) hd->timeouts++; - /* We are now ready to execute the task management request. */ - if (mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, - SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */) - < 0){ + retval = mptscsih_TMHandler(hd, MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS, + SCpnt->device->channel, 0, 0, 0, 5 /* 5 second timeout */); - /* The TM request failed and the subsequent FW-reload failed! - * Fatal error case. - */ - printk(MYIOC_s_WARN_FMT - "Error processing TaskMgmt request (sc=%p)\n", - hd->ioc->name, SCpnt); + printk (KERN_WARNING MYNAM ": %s: bus reset: %s (sc=%p)\n", + hd->ioc->name, + ((retval == 0) ? "SUCCESS" : "FAILED" ), SCpnt); + + if (retval == 0) + return SUCCESS; + + if(retval != FAILED ) { hd->tmPending = 0; hd->tmState = TM_STATE_NONE; - spin_lock_irq(host_lock); - return FAILED; } - - return SUCCESS; + return FAILED; } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ @@ -2165,7 +2185,7 @@ mptscsih_slave_alloc(struct scsi_device *device) vdev->raidVolume = 0; hd->Targets[device->id] = vdev; if (hd->ioc->bus_type == SCSI) { - if (hd->ioc->spi_data.isRaid & (1 << device->id)) { + if (hd->ioc->raid_data.isRaid & (1 << device->id)) { vdev->raidVolume = 1; ddvtprintk((KERN_INFO "RAID Volume @ id %d\n", device->id)); @@ -2180,22 +2200,6 @@ mptscsih_slave_alloc(struct scsi_device *device) return 0; } -static int -mptscsih_is_raid_volume(MPT_SCSI_HOST *hd, uint id) -{ - int i; - - if (!hd->ioc->spi_data.isRaid || !hd->ioc->spi_data.pIocPg3) - return 0; - - for (i = 0; i < hd->ioc->spi_data.pIocPg3->NumPhysDisks; i++) { - if (id == hd->ioc->spi_data.pIocPg3->PhysDisk[i].PhysDiskID) - return 1; - } - - return 0; -} - /* * OS entry point to allow for host driver to free allocated memory * Called if no device present or device being unloaded @@ -2223,7 +2227,7 @@ mptscsih_slave_destroy(struct scsi_device *device) hd->Targets[target] = NULL; if (hd->ioc->bus_type == SCSI) { - if (mptscsih_is_raid_volume(hd, target)) { + if (mptscsih_is_phys_disk(hd->ioc, target)) { hd->ioc->spi_data.forceDv |= MPT_SCSICFG_RELOAD_IOC_PG3; } else { hd->ioc->spi_data.dvStatus[target] = @@ -2436,6 +2440,7 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) { MPT_SCSI_HOST *hd; unsigned long flags; + int ii; dtmprintk((KERN_WARNING MYNAM ": IOC %s_reset routed to SCSI host driver!\n", @@ -2493,11 +2498,8 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) /* ScsiLookup initialization */ - { - int ii; - for (ii=0; ii < hd->ioc->req_depth; ii++) - hd->ScsiLookup[ii] = NULL; - } + for (ii=0; ii < hd->ioc->req_depth; ii++) + hd->ScsiLookup[ii] = NULL; /* 2. Chain Buffer initialization */ @@ -2546,6 +2548,16 @@ mptscsih_ioc_reset(MPT_ADAPTER *ioc, int reset_phase) } /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ +/* work queue thread to clear the persitency table */ +static void +mptscsih_sas_persist_clear_table(void * arg) +{ + MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg; + + mptbase_sas_persist_operation(ioc, MPI_SAS_OP_CLEAR_NOT_PRESENT); +} + +/*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) { @@ -2555,18 +2567,18 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) devtprintk((MYIOC_s_INFO_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n", ioc->name, event)); + if (ioc->sh == NULL || + ((hd = (MPT_SCSI_HOST *)ioc->sh->hostdata) == NULL)) + return 1; + switch (event) { case MPI_EVENT_UNIT_ATTENTION: /* 03 */ /* FIXME! */ break; case MPI_EVENT_IOC_BUS_RESET: /* 04 */ case MPI_EVENT_EXT_BUS_RESET: /* 05 */ - hd = NULL; - if (ioc->sh) { - hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; - if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1)) - hd->soft_resets++; - } + if (hd && (ioc->bus_type == SCSI) && (hd->soft_resets < -1)) + hd->soft_resets++; break; case MPI_EVENT_LOGOUT: /* 09 */ /* FIXME! */ @@ -2585,69 +2597,24 @@ mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply) break; case MPI_EVENT_INTEGRATED_RAID: /* 0B */ + { + pMpiEventDataRaid_t pRaidEventData = + (pMpiEventDataRaid_t) pEvReply->Data; #ifdef MPTSCSIH_ENABLE_DOMAIN_VALIDATION - /* negoNvram set to 0 if DV enabled and to USE_NVRAM if - * if DV disabled. Need to check for target mode. - */ - hd = NULL; - if (ioc->sh) - hd = (MPT_SCSI_HOST *) ioc->sh->hostdata; - - if (hd && (ioc->bus_type == SCSI) && (hd->negoNvram == 0)) { - ScsiCfgData *pSpi; - Ioc3PhysDisk_t *pPDisk; - int numPDisk; - u8 reason; - u8 physDiskNum; - - reason = (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16; - if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) { - /* New or replaced disk. - * Set DV flag and schedule DV. - */ - pSpi = &ioc->spi_data; - physDiskNum = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24; - ddvtprintk(("DV requested for phys disk id %d\n", physDiskNum)); - if (pSpi->pIocPg3) { - pPDisk = pSpi->pIocPg3->PhysDisk; - numPDisk =pSpi->pIocPg3->NumPhysDisks; - - while (numPDisk) { - if (physDiskNum == pPDisk->PhysDiskNum) { - pSpi->dvStatus[pPDisk->PhysDiskID] = (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); - pSpi->forceDv = MPT_SCSICFG_NEED_DV; - ddvtprintk(("NEED_DV set for phys disk id %d\n", pPDisk->PhysDiskID)); - break; - } - pPDisk++; - numPDisk--; - } - - if (numPDisk == 0) { - /* The physical disk that needs DV was not found - * in the stored IOC Page 3. The driver must reload - * this page. DV routine will set the NEED_DV flag for - * all phys disks that have DV_NOT_DONE set. - */ - pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; - ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n", physDiskNum)); - } - } - } - } + /* Domain Validation Needed */ + if (ioc->bus_type == SCSI && + pRaidEventData->ReasonCode == + MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) + mptscsih_set_dvflags_raid(hd, pRaidEventData->PhysDiskNum); #endif + break; + } -#if defined(MPT_DEBUG_DV) || defined(MPT_DEBUG_DV_TINY) - printk("Raid Event RF: "); - { - u32 *m = (u32 *)pEvReply; - int ii; - int n = (int)pEvReply->MsgLength; - for (ii=6; ii < n; ii++) - printk(" %08x", le32_to_cpu(m[ii])); - printk("\n"); - } -#endif + /* Persistent table is full. */ + case MPI_EVENT_PERSISTENT_TABLE_FULL: + INIT_WORK(&mptscsih_persistTask, + mptscsih_sas_persist_clear_table,(void *)ioc); + schedule_work(&mptscsih_persistTask); break; case MPI_EVENT_NONE: /* 00 */ @@ -2684,7 +2651,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * { int indexed_lun, lun_index; VirtDevice *vdev; - ScsiCfgData *pSpi; + SpiCfgData *pSpi; char data_56; dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n", @@ -2791,7 +2758,7 @@ mptscsih_initTarget(MPT_SCSI_HOST *hd, int bus_id, int target_id, u8 lun, char * static void mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) { - ScsiCfgData *pspi_data = &hd->ioc->spi_data; + SpiCfgData *pspi_data = &hd->ioc->spi_data; int id = (int) target->target_id; int nvram; VirtDevice *vdev; @@ -2970,11 +2937,13 @@ mptscsih_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtDevice *target, char byte56) static void mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) { + MPT_ADAPTER *ioc = hd->ioc; u8 cmd; - ScsiCfgData *pSpi; + SpiCfgData *pSpi; - ddvtprintk((" set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", - pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); + ddvtprintk((MYIOC_s_NOTE_FMT + " set_dvflags: id=%d lun=%d negoNvram=%x cmd=%x\n", + hd->ioc->name, pReq->TargetID, pReq->LUN[1], hd->negoNvram, pReq->CDB[0])); if ((pReq->LUN[1] != 0) || (hd->negoNvram != 0)) return; @@ -2982,12 +2951,12 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) cmd = pReq->CDB[0]; if ((cmd == READ_CAPACITY) || (cmd == MODE_SENSE)) { - pSpi = &hd->ioc->spi_data; - if ((pSpi->isRaid & (1 << pReq->TargetID)) && pSpi->pIocPg3) { + pSpi = &ioc->spi_data; + if ((ioc->raid_data.isRaid & (1 << pReq->TargetID)) && ioc->raid_data.pIocPg3) { /* Set NEED_DV for all hidden disks */ - Ioc3PhysDisk_t *pPDisk = pSpi->pIocPg3->PhysDisk; - int numPDisk = pSpi->pIocPg3->NumPhysDisks; + Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; while (numPDisk) { pSpi->dvStatus[pPDisk->PhysDiskID] |= MPT_SCSICFG_NEED_DV; @@ -3001,6 +2970,50 @@ mptscsih_set_dvflags(MPT_SCSI_HOST *hd, SCSIIORequest_t *pReq) } } +/* mptscsih_raid_set_dv_flags() + * + * New or replaced disk. Set DV flag and schedule DV. + */ +static void +mptscsih_set_dvflags_raid(MPT_SCSI_HOST *hd, int id) +{ + MPT_ADAPTER *ioc = hd->ioc; + SpiCfgData *pSpi = &ioc->spi_data; + Ioc3PhysDisk_t *pPDisk; + int numPDisk; + + if (hd->negoNvram != 0) + return; + + ddvtprintk(("DV requested for phys disk id %d\n", id)); + if (ioc->raid_data.pIocPg3) { + pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; + while (numPDisk) { + if (id == pPDisk->PhysDiskNum) { + pSpi->dvStatus[pPDisk->PhysDiskID] = + (MPT_SCSICFG_NEED_DV | MPT_SCSICFG_DV_NOT_DONE); + pSpi->forceDv = MPT_SCSICFG_NEED_DV; + ddvtprintk(("NEED_DV set for phys disk id %d\n", + pPDisk->PhysDiskID)); + break; + } + pPDisk++; + numPDisk--; + } + + if (numPDisk == 0) { + /* The physical disk that needs DV was not found + * in the stored IOC Page 3. The driver must reload + * this page. DV routine will set the NEED_DV flag for + * all phys disks that have DV_NOT_DONE set. + */ + pSpi->forceDv = MPT_SCSICFG_NEED_DV | MPT_SCSICFG_RELOAD_IOC_PG3; + ddvtprintk(("phys disk %d not found. Setting reload IOC Pg3 Flag\n",id)); + } + } +} + /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/ /* * If no Target, bus reset on 1st I/O. Set the flag to @@ -3088,7 +3101,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) MPT_ADAPTER *ioc = hd->ioc; Config_t *pReq; SCSIDevicePage1_t *pData; - VirtDevice *pTarget; + VirtDevice *pTarget=NULL; MPT_FRAME_HDR *mf; dma_addr_t dataDma; u16 req_idx; @@ -3187,7 +3200,7 @@ mptscsih_writeSDP1(MPT_SCSI_HOST *hd, int portnum, int target_id, int flags) #endif if (flags & MPT_SCSICFG_BLK_NEGO) - negoFlags = MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC; + negoFlags |= MPT_TARGET_NO_NEGO_WIDE | MPT_TARGET_NO_NEGO_SYNC; mptscsih_setDevicePage1Flags(width, factor, offset, &requested, &configuration, negoFlags); @@ -4008,7 +4021,7 @@ mptscsih_synchronize_cache(MPT_SCSI_HOST *hd, int portnum) /* If target Ptr NULL or if this target is NOT a disk, skip. */ - if ((pTarget) && (pTarget->tflags & MPT_TARGET_FLAGS_Q_YES)){ + if ((pTarget) && (pTarget->inq_data[0] == TYPE_DISK)){ for (lun=0; lun <= MPT_LAST_LUN; lun++) { /* If LUN present, issue the command */ @@ -4103,9 +4116,9 @@ mptscsih_domainValidation(void *arg) if ((ioc->spi_data.forceDv & MPT_SCSICFG_RELOAD_IOC_PG3) != 0) { mpt_read_ioc_pg_3(ioc); - if (ioc->spi_data.pIocPg3) { - Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; - int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + if (ioc->raid_data.pIocPg3) { + Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; while (numPDisk) { if (ioc->spi_data.dvStatus[pPDisk->PhysDiskID] & MPT_SCSICFG_DV_NOT_DONE) @@ -4144,7 +4157,7 @@ mptscsih_domainValidation(void *arg) isPhysDisk = mptscsih_is_phys_disk(ioc, id); if (isPhysDisk) { for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { - if (hd->ioc->spi_data.isRaid & (1 << ii)) { + if (hd->ioc->raid_data.isRaid & (1 << ii)) { hd->ioc->spi_data.dvStatus[ii] |= MPT_SCSICFG_DV_PENDING; } } @@ -4163,7 +4176,7 @@ mptscsih_domainValidation(void *arg) if (isPhysDisk) { for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) { - if (hd->ioc->spi_data.isRaid & (1 << ii)) { + if (hd->ioc->raid_data.isRaid & (1 << ii)) { hd->ioc->spi_data.dvStatus[ii] &= ~MPT_SCSICFG_DV_PENDING; } } @@ -4185,21 +4198,21 @@ mptscsih_domainValidation(void *arg) /* Search IOC page 3 to determine if this is hidden physical disk */ -static int +/* Search IOC page 3 to determine if this is hidden physical disk + */ +static int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, int id) { - if (ioc->spi_data.pIocPg3) { - Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; - int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + int i; - while (numPDisk) { - if (pPDisk->PhysDiskID == id) { - return 1; - } - pPDisk++; - numPDisk--; - } + if (!ioc->raid_data.isRaid || !ioc->raid_data.pIocPg3) + return 0; + + for (i = 0; i < ioc->raid_data.pIocPg3->NumPhysDisks; i++) { + if (id == ioc->raid_data.pIocPg3->PhysDisk[i].PhysDiskID) + return 1; } + return 0; } @@ -4405,7 +4418,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) /* Skip this ID? Set cfg.cfghdr.hdr to force config page write */ { - ScsiCfgData *pspi_data = &hd->ioc->spi_data; + SpiCfgData *pspi_data = &hd->ioc->spi_data; if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) { /* Set the factor from nvram */ nfactor = (pspi_data->nvram[id] & MPT_NVRAM_SYNC_MASK) >> 8; @@ -4435,11 +4448,11 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) } /* Finish iocmd inititialization - hidden or visible disk? */ - if (ioc->spi_data.pIocPg3) { + if (ioc->raid_data.pIocPg3) { /* Search IOC page 3 for matching id */ - Ioc3PhysDisk_t *pPDisk = ioc->spi_data.pIocPg3->PhysDisk; - int numPDisk = ioc->spi_data.pIocPg3->NumPhysDisks; + Ioc3PhysDisk_t *pPDisk = ioc->raid_data.pIocPg3->PhysDisk; + int numPDisk = ioc->raid_data.pIocPg3->NumPhysDisks; while (numPDisk) { if (pPDisk->PhysDiskID == id) { @@ -4463,7 +4476,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) /* RAID Volume ID's may double for a physical device. If RAID but * not a physical ID as well, skip DV. */ - if ((hd->ioc->spi_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK)) + if ((hd->ioc->raid_data.isRaid & (1 << id)) && !(iocmd.flags & MPT_ICFLAG_PHYS_DISK)) goto target_done; @@ -4812,6 +4825,8 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) notDone = 0; if (iocmd.flags & MPT_ICFLAG_ECHO) { bufsize = ((pbuf1[2] & 0x1F) <<8) | pbuf1[3]; + if (pbuf1[0] & 0x01) + iocmd.flags |= MPT_ICFLAG_EBOS; } else { bufsize = pbuf1[1]<<16 | pbuf1[2]<<8 | pbuf1[3]; } @@ -4908,6 +4923,9 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) } iocmd.flags &= ~MPT_ICFLAG_DID_RESET; + if (iocmd.flags & MPT_ICFLAG_EBOS) + goto skip_Reserve; + repeat = 5; while (repeat && (!(iocmd.flags & MPT_ICFLAG_RESERVED))) { iocmd.cmd = RESERVE; @@ -4951,6 +4969,7 @@ mptscsih_doDv(MPT_SCSI_HOST *hd, int bus_number, int id) } } +skip_Reserve: mptscsih_fillbuf(pbuf1, sz, patt, 1); iocmd.cmd = WRITE_BUFFER; iocmd.data_dma = buf1_dma; @@ -5195,11 +5214,12 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) * If not an LVD bus, the adapter minSyncFactor has been * already throttled back. */ + negoFlags = hd->ioc->spi_data.noQas; if ((hd->Targets)&&((pTarget = hd->Targets[(int)id]) != NULL) && !pTarget->raidVolume) { width = pTarget->maxWidth; offset = pTarget->maxOffset; factor = pTarget->minSyncFactor; - negoFlags = pTarget->negoFlags; + negoFlags |= pTarget->negoFlags; } else { if (hd->ioc->spi_data.nvram && (hd->ioc->spi_data.nvram[id] != MPT_HOST_NVRAM_INVALID)) { data = hd->ioc->spi_data.nvram[id]; @@ -5220,7 +5240,6 @@ mptscsih_dv_parms(MPT_SCSI_HOST *hd, DVPARAMETERS *dv,void *pPage) } /* Set the negotiation flags */ - negoFlags = hd->ioc->spi_data.noQas; if (!width) negoFlags |= MPT_TARGET_NO_NEGO_WIDE; diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h index 51c0255ac16e..09389af9845e 100644 --- a/drivers/message/fusion/mptscsih.h +++ b/drivers/message/fusion/mptscsih.h @@ -1,5 +1,5 @@ /* - * linux/drivers/message/fusion/mptscsi.h + * linux/drivers/message/fusion/mptscsih.h * High performance SCSI / Fibre Channel SCSI Host device driver. * For use with PCI chip/adapter(s): * LSIFC9xx/LSI409xx Fibre Channel @@ -53,8 +53,8 @@ * SCSI Public stuff... */ -#define MPT_SCSI_CMD_PER_DEV_HIGH 31 -#define MPT_SCSI_CMD_PER_DEV_LOW 7 +#define MPT_SCSI_CMD_PER_DEV_HIGH 64 +#define MPT_SCSI_CMD_PER_DEV_LOW 32 #define MPT_SCSI_CMD_PER_LUN 7 @@ -77,6 +77,7 @@ #define MPTSCSIH_MAX_WIDTH 1 #define MPTSCSIH_MIN_SYNC 0x08 #define MPTSCSIH_SAF_TE 0 +#define MPTSCSIH_PT_CLEAR 0 #endif @@ -105,3 +106,4 @@ extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pE extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset); extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth); extern void mptscsih_timer_expired(unsigned long data); +extern void scsi_print_command(struct scsi_cmnd *cmd); diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c index 587d1274fd74..5c0e307d1d5d 100644 --- a/drivers/message/fusion/mptspi.c +++ b/drivers/message/fusion/mptspi.c @@ -199,7 +199,7 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id) printk(MYIOC_s_WARN_FMT "Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n", ioc->name, ioc); - return -ENODEV; + return 0; } sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST)); |
