diff options
Diffstat (limited to 'drivers/video/fbdev/geode/lxfb_ops.c')
| -rw-r--r-- | drivers/video/fbdev/geode/lxfb_ops.c | 845 |
1 files changed, 845 insertions, 0 deletions
diff --git a/drivers/video/fbdev/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c new file mode 100644 index 000000000000..79e9abc72b83 --- /dev/null +++ b/drivers/video/fbdev/geode/lxfb_ops.c @@ -0,0 +1,845 @@ +/* Geode LX framebuffer driver + * + * Copyright (C) 2006-2007, Advanced Micro Devices,Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/fb.h> +#include <linux/uaccess.h> +#include <linux/delay.h> +#include <linux/cs5535.h> + +#include "lxfb.h" + +/* TODO + * Support panel scaling + * Add acceleration + * Add support for interlacing (TV out) + * Support compression + */ + +/* This is the complete list of PLL frequencies that we can set - + * we will choose the closest match to the incoming clock. + * freq is the frequency of the dotclock * 1000 (for example, + * 24823 = 24.983 Mhz). + * pllval is the corresponding PLL value +*/ + +static const struct { + unsigned int pllval; + unsigned int freq; +} pll_table[] = { + { 0x000131AC, 6231 }, + { 0x0001215D, 6294 }, + { 0x00011087, 6750 }, + { 0x0001216C, 7081 }, + { 0x0001218D, 7140 }, + { 0x000110C9, 7800 }, + { 0x00013147, 7875 }, + { 0x000110A7, 8258 }, + { 0x00012159, 8778 }, + { 0x00014249, 8875 }, + { 0x00010057, 9000 }, + { 0x0001219A, 9472 }, + { 0x00012158, 9792 }, + { 0x00010045, 10000 }, + { 0x00010089, 10791 }, + { 0x000110E7, 11225 }, + { 0x00012136, 11430 }, + { 0x00013207, 12375 }, + { 0x00012187, 12500 }, + { 0x00014286, 14063 }, + { 0x000110E5, 15016 }, + { 0x00014214, 16250 }, + { 0x00011105, 17045 }, + { 0x000131E4, 18563 }, + { 0x00013183, 18750 }, + { 0x00014284, 19688 }, + { 0x00011104, 20400 }, + { 0x00016363, 23625 }, + { 0x000031AC, 24923 }, + { 0x0000215D, 25175 }, + { 0x00001087, 27000 }, + { 0x0000216C, 28322 }, + { 0x0000218D, 28560 }, + { 0x000010C9, 31200 }, + { 0x00003147, 31500 }, + { 0x000010A7, 33032 }, + { 0x00002159, 35112 }, + { 0x00004249, 35500 }, + { 0x00000057, 36000 }, + { 0x0000219A, 37889 }, + { 0x00002158, 39168 }, + { 0x00000045, 40000 }, + { 0x00000089, 43163 }, + { 0x000010E7, 44900 }, + { 0x00002136, 45720 }, + { 0x00003207, 49500 }, + { 0x00002187, 50000 }, + { 0x00004286, 56250 }, + { 0x000010E5, 60065 }, + { 0x00004214, 65000 }, + { 0x00001105, 68179 }, + { 0x000031E4, 74250 }, + { 0x00003183, 75000 }, + { 0x00004284, 78750 }, + { 0x00001104, 81600 }, + { 0x00006363, 94500 }, + { 0x00005303, 97520 }, + { 0x00002183, 100187 }, + { 0x00002122, 101420 }, + { 0x00001081, 108000 }, + { 0x00006201, 113310 }, + { 0x00000041, 119650 }, + { 0x000041A1, 129600 }, + { 0x00002182, 133500 }, + { 0x000041B1, 135000 }, + { 0x00000051, 144000 }, + { 0x000041E1, 148500 }, + { 0x000062D1, 157500 }, + { 0x000031A1, 162000 }, + { 0x00000061, 169203 }, + { 0x00004231, 172800 }, + { 0x00002151, 175500 }, + { 0x000052E1, 189000 }, + { 0x00000071, 192000 }, + { 0x00003201, 198000 }, + { 0x00004291, 202500 }, + { 0x00001101, 204750 }, + { 0x00007481, 218250 }, + { 0x00004170, 229500 }, + { 0x00006210, 234000 }, + { 0x00003140, 251182 }, + { 0x00006250, 261000 }, + { 0x000041C0, 278400 }, + { 0x00005220, 280640 }, + { 0x00000050, 288000 }, + { 0x000041E0, 297000 }, + { 0x00002130, 320207 } +}; + + +static void lx_set_dotpll(u32 pllval) +{ + u32 dotpll_lo, dotpll_hi; + int i; + + rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + + if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval)) + return; + + dotpll_hi = pllval; + dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX); + dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET; + + wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + + /* Wait 100us for the PLL to lock */ + + udelay(100); + + /* Now, loop for the lock bit */ + + for (i = 0; i < 1000; i++) { + rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); + if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK) + break; + } + + /* Clear the reset bit */ + + dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET; + wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi); +} + +/* Set the clock based on the frequency specified by the current mode */ + +static void lx_set_clock(struct fb_info *info) +{ + unsigned int diff, min, best = 0; + unsigned int freq, i; + + freq = (unsigned int) (1000000000 / info->var.pixclock); + + min = abs(pll_table[0].freq - freq); + + for (i = 0; i < ARRAY_SIZE(pll_table); i++) { + diff = abs(pll_table[i].freq - freq); + if (diff < min) { + min = diff; + best = i; + } + } + + lx_set_dotpll(pll_table[best].pllval & 0x00017FFF); +} + +static void lx_graphics_disable(struct fb_info *info) +{ + struct lxfb_par *par = info->par; + unsigned int val, gcfg; + + /* Note: This assumes that the video is in a quitet state */ + + write_vp(par, VP_A1T, 0); + write_vp(par, VP_A2T, 0); + write_vp(par, VP_A3T, 0); + + /* Turn off the VGA and video enable */ + val = read_dc(par, DC_GENERAL_CFG) & ~(DC_GENERAL_CFG_VGAE | + DC_GENERAL_CFG_VIDE); + + write_dc(par, DC_GENERAL_CFG, val); + + val = read_vp(par, VP_VCFG) & ~VP_VCFG_VID_EN; + write_vp(par, VP_VCFG, val); + + write_dc(par, DC_IRQ, DC_IRQ_MASK | DC_IRQ_VIP_VSYNC_LOSS_IRQ_MASK | + DC_IRQ_STATUS | DC_IRQ_VIP_VSYNC_IRQ_STATUS); + + val = read_dc(par, DC_GENLK_CTL) & ~DC_GENLK_CTL_GENLK_EN; + write_dc(par, DC_GENLK_CTL, val); + + val = read_dc(par, DC_CLR_KEY); + write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN); + + /* turn off the panel */ + write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P); + + val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN; + write_vp(par, VP_MISC, val); + + /* Turn off the display */ + + val = read_vp(par, VP_DCFG); + write_vp(par, VP_DCFG, val & ~(VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN | + VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN)); + + gcfg = read_dc(par, DC_GENERAL_CFG); + gcfg &= ~(DC_GENERAL_CFG_CMPE | DC_GENERAL_CFG_DECE); + write_dc(par, DC_GENERAL_CFG, gcfg); + + /* Turn off the TGEN */ + val = read_dc(par, DC_DISPLAY_CFG); + val &= ~DC_DISPLAY_CFG_TGEN; + write_dc(par, DC_DISPLAY_CFG, val); + + /* Wait 1000 usecs to ensure that the TGEN is clear */ + udelay(1000); + + /* Turn off the FIFO loader */ + + gcfg &= ~DC_GENERAL_CFG_DFLE; + write_dc(par, DC_GENERAL_CFG, gcfg); + + /* Lastly, wait for the GP to go idle */ + + do { + val = read_gp(par, GP_BLT_STATUS); + } while ((val & GP_BLT_STATUS_PB) || !(val & GP_BLT_STATUS_CE)); +} + +static void lx_graphics_enable(struct fb_info *info) +{ + struct lxfb_par *par = info->par; + u32 temp, config; + + /* Set the video request register */ + write_vp(par, VP_VRR, 0); + + /* Set up the polarities */ + + config = read_vp(par, VP_DCFG); + + config &= ~(VP_DCFG_CRT_SYNC_SKW | VP_DCFG_PWR_SEQ_DELAY | + VP_DCFG_CRT_HSYNC_POL | VP_DCFG_CRT_VSYNC_POL); + + config |= (VP_DCFG_CRT_SYNC_SKW_DEFAULT | VP_DCFG_PWR_SEQ_DELAY_DEFAULT + | VP_DCFG_GV_GAM); + + if (info->var.sync & FB_SYNC_HOR_HIGH_ACT) + config |= VP_DCFG_CRT_HSYNC_POL; + + if (info->var.sync & FB_SYNC_VERT_HIGH_ACT) + config |= VP_DCFG_CRT_VSYNC_POL; + + if (par->output & OUTPUT_PANEL) { + u32 msrlo, msrhi; + + write_fp(par, FP_PT1, 0); + temp = FP_PT2_SCRC; + + if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT)) + temp |= FP_PT2_HSP; + + if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT)) + temp |= FP_PT2_VSP; + + write_fp(par, FP_PT2, temp); + write_fp(par, FP_DFC, FP_DFC_BC); + + msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW; + msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH; + + wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi); + } + + if (par->output & OUTPUT_CRT) { + config |= VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN | + VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN; + } + + write_vp(par, VP_DCFG, config); + + /* Turn the CRT dacs back on */ + + if (par->output & OUTPUT_CRT) { + temp = read_vp(par, VP_MISC); + temp &= ~(VP_MISC_DACPWRDN | VP_MISC_APWRDN); + write_vp(par, VP_MISC, temp); + } + + /* Turn the panel on (if it isn't already) */ + if (par->output & OUTPUT_PANEL) + write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P); +} + +unsigned int lx_framebuffer_size(void) +{ + unsigned int val; + + if (!cs5535_has_vsa2()) { + uint32_t hi, lo; + + /* The number of pages is (PMAX - PMIN)+1 */ + rdmsr(MSR_GLIU_P2D_RO0, lo, hi); + + /* PMAX */ + val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20); + /* PMIN */ + val -= (lo & 0x000fffff); + val += 1; + + /* The page size is 4k */ + return (val << 12); + } + + /* The frame buffer size is reported by a VSM in VSA II */ + /* Virtual Register Class = 0x02 */ + /* VG_MEM_SIZE (1MB units) = 0x00 */ + + outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); + outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX); + + val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFE; + return (val << 20); +} + +void lx_set_mode(struct fb_info *info) +{ + struct lxfb_par *par = info->par; + u64 msrval; + + unsigned int max, dv, val, size; + + unsigned int gcfg, dcfg; + int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal; + int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal; + + /* Unlock the DC registers */ + write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK); + + lx_graphics_disable(info); + + lx_set_clock(info); + + /* Set output mode */ + + rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); + msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT; + + if (par->output & OUTPUT_PANEL) { + msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP; + + if (par->output & OUTPUT_CRT) + msrval |= MSR_LX_GLD_MSR_CONFIG_FPC; + else + msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC; + } else + msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT; + + wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval); + + /* Clear the various buffers */ + /* FIXME: Adjust for panning here */ + + write_dc(par, DC_FB_ST_OFFSET, 0); + write_dc(par, DC_CB_ST_OFFSET, 0); + write_dc(par, DC_CURS_ST_OFFSET, 0); + + /* FIXME: Add support for interlacing */ + /* FIXME: Add support for scaling */ + + val = read_dc(par, DC_GENLK_CTL); + val &= ~(DC_GENLK_CTL_ALPHA_FLICK_EN | DC_GENLK_CTL_FLICK_EN | + DC_GENLK_CTL_FLICK_SEL_MASK); + + /* Default scaling params */ + + write_dc(par, DC_GFX_SCALE, (0x4000 << 16) | 0x4000); + write_dc(par, DC_IRQ_FILT_CTL, 0); + write_dc(par, DC_GENLK_CTL, val); + + /* FIXME: Support compression */ + + if (info->fix.line_length > 4096) + dv = DC_DV_CTL_DV_LINE_SIZE_8K; + else if (info->fix.line_length > 2048) + dv = DC_DV_CTL_DV_LINE_SIZE_4K; + else if (info->fix.line_length > 1024) + dv = DC_DV_CTL_DV_LINE_SIZE_2K; + else + dv = DC_DV_CTL_DV_LINE_SIZE_1K; + + max = info->fix.line_length * info->var.yres; + max = (max + 0x3FF) & 0xFFFFFC00; + + write_dc(par, DC_DV_TOP, max | DC_DV_TOP_DV_TOP_EN); + + val = read_dc(par, DC_DV_CTL) & ~DC_DV_CTL_DV_LINE_SIZE; + write_dc(par, DC_DV_CTL, val | dv); + + size = info->var.xres * (info->var.bits_per_pixel >> 3); + + write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3); + write_dc(par, DC_LINE_SIZE, (size + 7) >> 3); + + /* Set default watermark values */ + + rdmsrl(MSR_LX_SPARE_MSR, msrval); + + msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO + | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL + | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M + | MSR_LX_SPARE_MSR_WM_LPEN_OVRD); + msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM | + MSR_LX_SPARE_MSR_DIS_INIT_V_PRI; + wrmsrl(MSR_LX_SPARE_MSR, msrval); + + gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */ + gcfg |= (0x6 << DC_GENERAL_CFG_DFHPSL_SHIFT) | /* default priority */ + (0xb << DC_GENERAL_CFG_DFHPEL_SHIFT); + gcfg |= DC_GENERAL_CFG_FDTY; /* Set the frame dirty mode */ + + dcfg = DC_DISPLAY_CFG_VDEN; /* Enable video data */ + dcfg |= DC_DISPLAY_CFG_GDEN; /* Enable graphics */ + dcfg |= DC_DISPLAY_CFG_TGEN; /* Turn on the timing generator */ + dcfg |= DC_DISPLAY_CFG_TRUP; /* Update timings immediately */ + dcfg |= DC_DISPLAY_CFG_PALB; /* Palette bypass in > 8 bpp modes */ + dcfg |= DC_DISPLAY_CFG_VISL; + dcfg |= DC_DISPLAY_CFG_DCEN; /* Always center the display */ + + /* Set the current BPP mode */ + + switch (info->var.bits_per_pixel) { + case 8: + dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP; + break; + + case 16: + dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP; + break; + + case 32: + case 24: + dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP; + break; + } + + /* Now - set up the timings */ + + hactive = info->var.xres; + hblankstart = hactive; + hsyncstart = hblankstart + info->var.right_margin; + hsyncend = hsyncstart + info->var.hsync_len; + hblankend = hsyncend + info->var.left_margin; + htotal = hblankend; + + vactive = info->var.yres; + vblankstart = vactive; + vsyncstart = vblankstart + info->var.lower_margin; + vsyncend = vsyncstart + info->var.vsync_len; + vblankend = vsyncend + info->var.upper_margin; + vtotal = vblankend; + + write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | ((htotal - 1) << 16)); + write_dc(par, DC_H_BLANK_TIMING, + (hblankstart - 1) | ((hblankend - 1) << 16)); + write_dc(par, DC_H_SYNC_TIMING, + (hsyncstart - 1) | ((hsyncend - 1) << 16)); + + write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | ((vtotal - 1) << 16)); + write_dc(par, DC_V_BLANK_TIMING, + (vblankstart - 1) | ((vblankend - 1) << 16)); + write_dc(par, DC_V_SYNC_TIMING, + (vsyncstart - 1) | ((vsyncend - 1) << 16)); + + write_dc(par, DC_FB_ACTIVE, + (info->var.xres - 1) << 16 | (info->var.yres - 1)); + + /* And re-enable the graphics output */ + lx_graphics_enable(info); + + /* Write the two main configuration registers */ + write_dc(par, DC_DISPLAY_CFG, dcfg); + write_dc(par, DC_ARB_CFG, 0); + write_dc(par, DC_GENERAL_CFG, gcfg); + + /* Lock the DC registers */ + write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK); +} + +void lx_set_palette_reg(struct fb_info *info, unsigned regno, + unsigned red, unsigned green, unsigned blue) +{ + struct lxfb_par *par = info->par; + int val; + + /* Hardware palette is in RGB 8-8-8 format. */ + + val = (red << 8) & 0xff0000; + val |= (green) & 0x00ff00; + val |= (blue >> 8) & 0x0000ff; + + write_dc(par, DC_PAL_ADDRESS, regno); + write_dc(par, DC_PAL_DATA, val); +} + +int lx_blank_display(struct fb_info *info, int blank_mode) +{ + struct lxfb_par *par = info->par; + u32 dcfg, misc, fp_pm; + int blank, hsync, vsync; + + /* CRT power saving modes. */ + switch (blank_mode) { + case FB_BLANK_UNBLANK: + blank = 0; hsync = 1; vsync = 1; + break; + case FB_BLANK_NORMAL: + blank = 1; hsync = 1; vsync = 1; + break; + case FB_BLANK_VSYNC_SUSPEND: + blank = 1; hsync = 1; vsync = 0; + break; + case FB_BLANK_HSYNC_SUSPEND: + blank = 1; hsync = 0; vsync = 1; + break; + case FB_BLANK_POWERDOWN: + blank = 1; hsync = 0; vsync = 0; + break; + default: + return -EINVAL; + } + + dcfg = read_vp(par, VP_DCFG); + dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN | + VP_DCFG_CRT_EN); + if (!blank) + dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN; + if (hsync) + dcfg |= VP_DCFG_HSYNC_EN; + if (vsync) + dcfg |= VP_DCFG_VSYNC_EN; + + write_vp(par, VP_DCFG, dcfg); + + misc = read_vp(par, VP_MISC); + + if (vsync && hsync) + misc &= ~VP_MISC_DACPWRDN; + else + misc |= VP_MISC_DACPWRDN; + + write_vp(par, VP_MISC, misc); + + /* Power on/off flat panel */ + + if (par->output & OUTPUT_PANEL) { + fp_pm = read_fp(par, FP_PM); + if (blank_mode == FB_BLANK_POWERDOWN) + fp_pm &= ~FP_PM_P; + else + fp_pm |= FP_PM_P; + write_fp(par, FP_PM, fp_pm); + } + + return 0; +} + +#ifdef CONFIG_PM + +static void lx_save_regs(struct lxfb_par *par) +{ + uint32_t filt; + int i; + + /* wait for the BLT engine to stop being busy */ + do { + i = read_gp(par, GP_BLT_STATUS); + } while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE)); + + /* save MSRs */ + rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel); + rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll); + rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg); + rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare); + + write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK); + + /* save registers */ + memcpy(par->gp, par->gp_regs, sizeof(par->gp)); + memcpy(par->dc, par->dc_regs, sizeof(par->dc)); + memcpy(par->vp, par->vp_regs, sizeof(par->vp)); + memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp)); + + /* save the display controller palette */ + write_dc(par, DC_PAL_ADDRESS, 0); + for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++) + par->dc_pal[i] = read_dc(par, DC_PAL_DATA); + + /* save the video processor palette */ + write_vp(par, VP_PAR, 0); + for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++) + par->vp_pal[i] = read_vp(par, VP_PDR); + + /* save the horizontal filter coefficients */ + filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL; + for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) { + write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i); + par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1); + par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2); + } + + /* save the vertical filter coefficients */ + filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL; + for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) { + write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i); + par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1); + } + + /* save video coeff ram */ + memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff)); +} + +static void lx_restore_gfx_proc(struct lxfb_par *par) +{ + int i; + + /* a bunch of registers require GP_RASTER_MODE to be set first */ + write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]); + + for (i = 0; i < ARRAY_SIZE(par->gp); i++) { + switch (i) { + case GP_RASTER_MODE: + case GP_VECTOR_MODE: + case GP_BLT_MODE: + case GP_BLT_STATUS: + case GP_HST_SRC: + /* FIXME: restore LUT data */ + case GP_LUT_INDEX: + case GP_LUT_DATA: + /* don't restore these registers */ + break; + + default: + write_gp(par, i, par->gp[i]); + } + } +} + +static void lx_restore_display_ctlr(struct lxfb_par *par) +{ + uint32_t filt; + int i; + + wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare); + + for (i = 0; i < ARRAY_SIZE(par->dc); i++) { + switch (i) { + case DC_UNLOCK: + /* unlock the DC; runs first */ + write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK); + break; + + case DC_GENERAL_CFG: + case DC_DISPLAY_CFG: + /* disable all while restoring */ + write_dc(par, i, 0); + break; + + case DC_DV_CTL: + /* set all ram to dirty */ + write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM); + + case DC_RSVD_1: + case DC_RSVD_2: + case DC_RSVD_3: + case DC_LINE_CNT: + case DC_PAL_ADDRESS: + case DC_PAL_DATA: + case DC_DFIFO_DIAG: + case DC_CFIFO_DIAG: + case DC_FILT_COEFF1: + case DC_FILT_COEFF2: + case DC_RSVD_4: + case DC_RSVD_5: + /* don't restore these registers */ + break; + + default: + write_dc(par, i, par->dc[i]); + } + } + + /* restore the palette */ + write_dc(par, DC_PAL_ADDRESS, 0); + for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++) + write_dc(par, DC_PAL_DATA, par->dc_pal[i]); + + /* restore the horizontal filter coefficients */ + filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL; + for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) { + write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i); + write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]); + write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]); + } + + /* restore the vertical filter coefficients */ + filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL; + for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) { + write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i); + write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]); + } +} + +static void lx_restore_video_proc(struct lxfb_par *par) +{ + int i; + + wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg); + wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel); + + for (i = 0; i < ARRAY_SIZE(par->vp); i++) { + switch (i) { + case VP_VCFG: + case VP_DCFG: + case VP_PAR: + case VP_PDR: + case VP_CCS: + case VP_RSVD_0: + /* case VP_VDC: */ /* why should this not be restored? */ + case VP_RSVD_1: + case VP_CRC32: + /* don't restore these registers */ + break; + + default: + write_vp(par, i, par->vp[i]); + } + } + + /* restore video processor palette */ + write_vp(par, VP_PAR, 0); + for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++) + write_vp(par, VP_PDR, par->vp_pal[i]); + + /* restore video coeff ram */ + memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff)); +} + +static void lx_restore_regs(struct lxfb_par *par) +{ + int i; + + lx_set_dotpll((u32) (par->msr.dotpll >> 32)); + lx_restore_gfx_proc(par); + lx_restore_display_ctlr(par); + lx_restore_video_proc(par); + + /* Flat Panel */ + for (i = 0; i < ARRAY_SIZE(par->fp); i++) { + switch (i) { + case FP_PM: + case FP_RSVD_0: + case FP_RSVD_1: + case FP_RSVD_2: + case FP_RSVD_3: + case FP_RSVD_4: + /* don't restore these registers */ + break; + + default: + write_fp(par, i, par->fp[i]); + } + } + + /* control the panel */ + if (par->fp[FP_PM] & FP_PM_P) { + /* power on the panel if not already power{ed,ing} on */ + if (!(read_fp(par, FP_PM) & + (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP))) + write_fp(par, FP_PM, par->fp[FP_PM]); + } else { + /* power down the panel if not already power{ed,ing} down */ + if (!(read_fp(par, FP_PM) & + (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN))) + write_fp(par, FP_PM, par->fp[FP_PM]); + } + + /* turn everything on */ + write_vp(par, VP_VCFG, par->vp[VP_VCFG]); + write_vp(par, VP_DCFG, par->vp[VP_DCFG]); + write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]); + /* do this last; it will enable the FIFO load */ + write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]); + + /* lock the door behind us */ + write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK); +} + +int lx_powerdown(struct fb_info *info) +{ + struct lxfb_par *par = info->par; + + if (par->powered_down) + return 0; + + lx_save_regs(par); + lx_graphics_disable(info); + + par->powered_down = 1; + return 0; +} + +int lx_powerup(struct fb_info *info) +{ + struct lxfb_par *par = info->par; + + if (!par->powered_down) + return 0; + + lx_restore_regs(par); + + par->powered_down = 0; + return 0; +} + +#endif |
