diff options
Diffstat (limited to 'drivers/video/backlight')
-rw-r--r-- | drivers/video/backlight/88pm860x_bl.c | 49 | ||||
-rw-r--r-- | drivers/video/backlight/Kconfig | 6 | ||||
-rw-r--r-- | drivers/video/backlight/Makefile | 1 | ||||
-rw-r--r-- | drivers/video/backlight/apple_bl.c | 23 | ||||
-rw-r--r-- | drivers/video/backlight/da9052_bl.c | 187 | ||||
-rw-r--r-- | drivers/video/backlight/ep93xx_bl.c | 25 | ||||
-rw-r--r-- | drivers/video/backlight/locomolcd.c | 9 | ||||
-rw-r--r-- | drivers/video/backlight/tosa_lcd.c | 2 |
8 files changed, 259 insertions, 43 deletions
diff --git a/drivers/video/backlight/88pm860x_bl.c b/drivers/video/backlight/88pm860x_bl.c index 915943af3f21..f49181c73113 100644 --- a/drivers/video/backlight/88pm860x_bl.c +++ b/drivers/video/backlight/88pm860x_bl.c @@ -67,6 +67,28 @@ static inline int wled_idc(int port) return ret; } +static int backlight_power_set(struct pm860x_chip *chip, int port, + int on) +{ + int ret = -EINVAL; + + switch (port) { + case PM8606_BACKLIGHT1: + ret = on ? pm8606_osc_enable(chip, WLED1_DUTY) : + pm8606_osc_disable(chip, WLED1_DUTY); + break; + case PM8606_BACKLIGHT2: + ret = on ? pm8606_osc_enable(chip, WLED2_DUTY) : + pm8606_osc_disable(chip, WLED2_DUTY); + break; + case PM8606_BACKLIGHT3: + ret = on ? pm8606_osc_enable(chip, WLED3_DUTY) : + pm8606_osc_disable(chip, WLED3_DUTY); + break; + } + return ret; +} + static int pm860x_backlight_set(struct backlight_device *bl, int brightness) { struct pm860x_backlight_data *data = bl_get_data(bl); @@ -79,6 +101,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) else value = brightness; + if (brightness) + backlight_power_set(chip, data->port, 1); + ret = pm860x_reg_write(data->i2c, wled_a(data->port), value); if (ret < 0) goto out; @@ -115,6 +140,9 @@ static int pm860x_backlight_set(struct backlight_device *bl, int brightness) if (ret < 0) goto out; + if (brightness == 0) + backlight_power_set(chip, data->port, 0); + dev_dbg(chip->dev, "set brightness %d\n", value); data->current_brightness = value; return 0; @@ -170,7 +198,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) struct backlight_device *bl; struct resource *res; struct backlight_properties props; - unsigned char value; char name[MFD_NAME_SIZE]; int ret; @@ -217,26 +244,6 @@ static int pm860x_backlight_probe(struct platform_device *pdev) platform_set_drvdata(pdev, bl); - /* Enable reference VSYS */ - ret = pm860x_reg_read(data->i2c, PM8606_VSYS); - if (ret < 0) - goto out; - if ((ret & PM8606_VSYS_EN) == 0) { - value = ret | PM8606_VSYS_EN; - ret = pm860x_reg_write(data->i2c, PM8606_VSYS, value); - if (ret < 0) - goto out; - } - /* Enable reference OSC */ - ret = pm860x_reg_read(data->i2c, PM8606_MISC); - if (ret < 0) - goto out; - if ((ret & PM8606_MISC_OSC_EN) == 0) { - value = ret | PM8606_MISC_OSC_EN; - ret = pm860x_reg_write(data->i2c, PM8606_MISC, value); - if (ret < 0) - goto out; - } /* read current backlight */ ret = pm860x_backlight_get_brightness(bl); if (ret < 0) diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 7ed9991fa747..af16884491ed 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -245,6 +245,12 @@ config BACKLIGHT_DA903X If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + config BACKLIGHT_MAX8925 tristate "Backlight driver for MAX8925" depends on MFD_MAX8925 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 8071eb656147..36855ae887d6 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o +obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/apple_bl.c b/drivers/video/backlight/apple_bl.c index be98d152b7fd..a523b255e124 100644 --- a/drivers/video/backlight/apple_bl.c +++ b/drivers/video/backlight/apple_bl.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/pci.h> #include <linux/acpi.h> +#include <linux/atomic.h> static struct backlight_device *apple_backlight_device; @@ -221,14 +222,32 @@ static struct acpi_driver apple_bl_driver = { }, }; +static atomic_t apple_bl_registered = ATOMIC_INIT(0); + +int apple_bl_register(void) +{ + if (atomic_xchg(&apple_bl_registered, 1) == 0) + return acpi_bus_register_driver(&apple_bl_driver); + + return 0; +} +EXPORT_SYMBOL_GPL(apple_bl_register); + +void apple_bl_unregister(void) +{ + if (atomic_xchg(&apple_bl_registered, 0) == 1) + acpi_bus_unregister_driver(&apple_bl_driver); +} +EXPORT_SYMBOL_GPL(apple_bl_unregister); + static int __init apple_bl_init(void) { - return acpi_bus_register_driver(&apple_bl_driver); + return apple_bl_register(); } static void __exit apple_bl_exit(void) { - acpi_bus_unregister_driver(&apple_bl_driver); + apple_bl_unregister(); } module_init(apple_bl_init); diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c new file mode 100644 index 000000000000..b628d68f5162 --- /dev/null +++ b/drivers/video/backlight/da9052_bl.c @@ -0,0 +1,187 @@ +/* + * Backlight Driver for Dialog DA9052 PMICs + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/fb.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +#define DA9052_MAX_BRIGHTNESS 0xFF + +enum { + DA9052_WLEDS_OFF, + DA9052_WLEDS_ON, +}; + +enum { + DA9052_TYPE_WLED1, + DA9052_TYPE_WLED2, + DA9052_TYPE_WLED3, +}; + +static unsigned char wled_bank[] = { + DA9052_LED1_CONF_REG, + DA9052_LED2_CONF_REG, + DA9052_LED3_CONF_REG, +}; + +struct da9052_bl { + struct da9052 *da9052; + uint brightness; + uint state; + uint led_reg; +}; + +static int da9052_adjust_wled_brightness(struct da9052_bl *wleds) +{ + unsigned char boost_en; + unsigned char i_sink; + int ret; + + boost_en = 0x3F; + i_sink = 0xFF; + if (wleds->state == DA9052_WLEDS_OFF) { + boost_en = 0x00; + i_sink = 0x00; + } + + ret = da9052_reg_write(wleds->da9052, DA9052_BOOST_REG, boost_en); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, DA9052_LED_CONT_REG, i_sink); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], 0x0); + if (ret < 0) + return ret; + + msleep(10); + + if (wleds->brightness) { + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], + wleds->brightness); + if (ret < 0) + return ret; + } + + return 0; +} + +static int da9052_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = brightness; + wleds->state = DA9052_WLEDS_ON; + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_get_brightness(struct backlight_device *bl) +{ + struct da9052_bl *wleds = bl_get_data(bl); + + return wleds->brightness; +} + +static const struct backlight_ops da9052_backlight_ops = { + .update_status = da9052_backlight_update_status, + .get_brightness = da9052_backlight_get_brightness, +}; + +static int da9052_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct backlight_properties props; + struct da9052_bl *wleds; + + wleds = devm_kzalloc(&pdev->dev, sizeof(struct da9052_bl), GFP_KERNEL); + if (!wleds) + return -ENOMEM; + + wleds->da9052 = dev_get_drvdata(pdev->dev.parent); + wleds->brightness = 0; + wleds->led_reg = platform_get_device_id(pdev)->driver_data; + wleds->state = DA9052_WLEDS_OFF; + + props.type = BACKLIGHT_RAW; + props.max_brightness = DA9052_MAX_BRIGHTNESS; + + bl = backlight_device_register(pdev->name, wleds->da9052->dev, wleds, + &da9052_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + devm_kfree(&pdev->dev, wleds); + return PTR_ERR(bl); + } + + bl->props.max_brightness = DA9052_MAX_BRIGHTNESS; + bl->props.brightness = 0; + platform_set_drvdata(pdev, bl); + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = 0; + wleds->state = DA9052_WLEDS_OFF; + da9052_adjust_wled_brightness(wleds); + backlight_device_unregister(bl); + devm_kfree(&pdev->dev, wleds); + + return 0; +} + +static struct platform_device_id da9052_wled_ids[] = { + { + .name = "da9052-wled1", + .driver_data = DA9052_TYPE_WLED1, + }, + { + .name = "da9052-wled2", + .driver_data = DA9052_TYPE_WLED2, + }, + { + .name = "da9052-wled3", + .driver_data = DA9052_TYPE_WLED3, + }, +}; + +static struct platform_driver da9052_wled_driver = { + .probe = da9052_backlight_probe, + .remove = da9052_backlight_remove, + .id_table = da9052_wled_ids, + .driver = { + .name = "da9052-wled", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(da9052_wled_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("Backlight driver for DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-backlight"); diff --git a/drivers/video/backlight/ep93xx_bl.c b/drivers/video/backlight/ep93xx_bl.c index b62b8b9063b5..08214e1f0958 100644 --- a/drivers/video/backlight/ep93xx_bl.c +++ b/drivers/video/backlight/ep93xx_bl.c @@ -17,11 +17,6 @@ #include <linux/fb.h> #include <linux/backlight.h> -#include <mach/hardware.h> - -#define EP93XX_RASTER_REG(x) (EP93XX_RASTER_BASE + (x)) -#define EP93XX_RASTER_BRIGHTNESS EP93XX_RASTER_REG(0x20) - #define EP93XX_MAX_COUNT 255 #define EP93XX_MAX_BRIGHT 255 #define EP93XX_DEF_BRIGHT 128 @@ -35,7 +30,7 @@ static int ep93xxbl_set(struct backlight_device *bl, int brightness) { struct ep93xxbl *ep93xxbl = bl_get_data(bl); - __raw_writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio); + writel((brightness << 8) | EP93XX_MAX_COUNT, ep93xxbl->mmio); ep93xxbl->brightness = brightness; @@ -70,21 +65,29 @@ static int __init ep93xxbl_probe(struct platform_device *dev) struct ep93xxbl *ep93xxbl; struct backlight_device *bl; struct backlight_properties props; + struct resource *res; ep93xxbl = devm_kzalloc(&dev->dev, sizeof(*ep93xxbl), GFP_KERNEL); if (!ep93xxbl) return -ENOMEM; + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + /* - * This register is located in the range already ioremap'ed by - * the framebuffer driver. A MFD driver seems a bit of overkill - * to handle this so use the static I/O mapping; this address - * is already virtual. + * FIXME - We don't do a request_mem_region here because we are + * sharing the register space with the framebuffer driver (see + * drivers/video/ep93xx-fb.c) and doing so will cause the second + * loaded driver to return -EBUSY. * * NOTE: No locking is required; the framebuffer does not touch * this register. */ - ep93xxbl->mmio = EP93XX_RASTER_BRIGHTNESS; + ep93xxbl->mmio = devm_ioremap(&dev->dev, res->start, + resource_size(res)); + if (!ep93xxbl->mmio) + return -ENXIO; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c index be20b5cbe26c..3a6d5419e3e3 100644 --- a/drivers/video/backlight/locomolcd.c +++ b/drivers/video/backlight/locomolcd.c @@ -229,14 +229,7 @@ static struct locomo_driver poodle_lcd_driver = { static int __init locomolcd_init(void) { - int ret = locomo_driver_register(&poodle_lcd_driver); - if (ret) - return ret; - -#ifdef CONFIG_SA1100_COLLIE - sa1100fb_lcd_power = locomolcd_power; -#endif - return 0; + return locomo_driver_register(&poodle_lcd_driver); } static void __exit locomolcd_exit(void) diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c index a2161f631a83..2231aec23918 100644 --- a/drivers/video/backlight/tosa_lcd.c +++ b/drivers/video/backlight/tosa_lcd.c @@ -271,7 +271,7 @@ static int tosa_lcd_resume(struct spi_device *spi) } #else #define tosa_lcd_suspend NULL -#define tosa_lcd_reume NULL +#define tosa_lcd_resume NULL #endif static struct spi_driver tosa_lcd_driver = { |