diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 79 |
1 files changed, 0 insertions, 79 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 9c54695911c1..44b6ca290ce3 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -65,15 +65,6 @@ config FB_CFB_IMAGEBLIT blitting. This is used by drivers that don't provide their own (accelerated) version. -config FB_SOFT_CURSOR - tristate - depends on FB - default n - ---help--- - Include the soft_cursor function for generic software cursor support. - This is used by drivers that don't provide their own (accelerated) - version. - config FB_MACMODES tristate depends on FB @@ -114,7 +105,6 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -133,7 +123,6 @@ config FB_PM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Permedia2 AGP frame buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a @@ -152,7 +141,6 @@ config FB_ARMCLCD select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building @@ -169,7 +157,6 @@ config FB_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If @@ -181,7 +168,6 @@ config FB_CLPS711X select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y to enable the Framebuffer driver for the CLPS7111 and EP7212 processors. @@ -192,7 +178,6 @@ config FB_SA1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer @@ -207,7 +192,6 @@ config FB_IMX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" @@ -215,7 +199,6 @@ config FB_CYBER2000 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. @@ -228,7 +211,6 @@ config FB_APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_Q40 bool @@ -237,12 +219,10 @@ config FB_Q40 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA - select FB_SOFT_CURSOR help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. @@ -282,7 +262,6 @@ config FB_CYBER select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64 graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -297,7 +276,6 @@ config FB_VIRGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Cybervision 64/3D graphics card from Phase5. Please note that its use is not all that intuitive (i.e. if @@ -320,7 +298,6 @@ config FB_FM2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). @@ -331,7 +308,6 @@ config FB_ARC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix @@ -354,7 +330,6 @@ config FB_OF select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics @@ -366,7 +341,6 @@ config FB_CONTROL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the @@ -378,7 +352,6 @@ config FB_PLATINUM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics @@ -390,7 +363,6 @@ config FB_VALKYRIE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES help This driver supports a frame buffer for the "valkyrie" graphics @@ -402,7 +374,6 @@ config FB_CT65550 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Chips & Technologies 65550 graphics chip in PowerBooks. @@ -413,13 +384,11 @@ config FB_ASILIANT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR config FB_IMSTT bool "IMS Twin Turbo display support" depends on (FB = y) && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help The IMS Twin Turbo is a PCI-based frame buffer card bundled with @@ -431,7 +400,6 @@ config FB_VGA16 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for VGA 16 color graphic cards. Say Y if you have such a card. @@ -445,7 +413,6 @@ config FB_STI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y ---help--- STI refers to the HP "Standard Text Interface" which is a set of @@ -466,7 +433,6 @@ config FB_MAC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES # bool ' Apple DAFB display support' CONFIG_FB_DAFB @@ -475,7 +441,6 @@ config FB_HP300 depends on (FB = y) && HP300 select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR default y config FB_TGA @@ -484,7 +449,6 @@ config FB_TGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic TGA graphic cards. Say Y if you have one of those. @@ -495,7 +459,6 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -513,7 +476,6 @@ config FB_HGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a Hercules mono graphics card. @@ -542,7 +504,6 @@ config FB_SGIVW select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help SGI Visual Workstation support for framebuffer graphics. @@ -552,7 +513,6 @@ config FB_GBE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for SGI Graphics Backend. This chip is used in SGI O2 and Visual Workstation 320/540. @@ -580,7 +540,6 @@ config FB_BW2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the BWtwo frame buffer. @@ -589,7 +548,6 @@ config FB_CG3 depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGthree frame buffer. @@ -598,7 +556,6 @@ config FB_CG6 depends on (FB = y) && ((SPARC32 || SPARC64) && FB_SBUS || (SUN3 || SUN3X) && FB_SUN3) select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGsix (GX, TurboGX) frame buffer. @@ -609,7 +566,6 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. @@ -631,7 +587,6 @@ config FB_EPSON1355 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a @@ -676,7 +631,6 @@ config FB_S1D13XXX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for S1D13XXX framebuffer device family (currently only working with S1D13806). Product specs at @@ -691,7 +645,6 @@ config FB_NVIDIA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports graphics boards with the nVidia chips, TNT and newer. For very old chipsets, such as the RIVA128, then use @@ -809,7 +762,6 @@ config FB_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G chipsets. @@ -832,7 +784,6 @@ config FB_MATROX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC ---help--- @@ -973,7 +924,6 @@ config FB_RADEON_OLD select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help Choose this option if you want to use an ATI Radeon graphics card as @@ -991,7 +941,6 @@ config FB_RADEON select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_OF help Choose this option if you want to use an ATI Radeon graphics card as @@ -1029,7 +978,6 @@ config FB_ATY128 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC_PMAC help This driver supports graphics boards with the ATI Rage128 chips. @@ -1045,7 +993,6 @@ config FB_ATY select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select FB_MACMODES if PPC help This driver supports graphics boards with the ATI Mach64 chips. @@ -1103,7 +1050,6 @@ config FB_SAVAGE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks and computers with S3 Savage PCI/AGP chips. @@ -1140,7 +1086,6 @@ config FB_SIS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1170,7 +1115,6 @@ config FB_NEOMAGIC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This driver supports notebooks with NeoMagic PCI chips. Say Y if you have such a graphics card. @@ -1184,7 +1128,6 @@ config FB_KYRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you have a STG4000 / Kyro / PowerVR 3 based graphics board. @@ -1198,7 +1141,6 @@ config FB_3DFX select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA - select FB_SOFT_CURSOR help This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 chips. Say Y if you have such a graphics board. @@ -1220,7 +1162,6 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1237,7 +1178,6 @@ config FB_CYBLA tristate "Cyberblade/i1 support" depends on FB && PCI select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR select VIDEO_SELECT ---help--- This driver is supposed to support the Trident Cyberblade/i1 @@ -1265,7 +1205,6 @@ config FB_TRIDENT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This driver is supposed to support graphics boards with the Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops @@ -1314,7 +1253,6 @@ config FB_FFB depends on FB_SBUS && SPARC64 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Creator, Creator3D, and Elite3D graphics boards. @@ -1325,7 +1263,6 @@ config FB_TCX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the TCX 24/8bit frame buffer. @@ -1336,7 +1273,6 @@ config FB_CG14 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the CGfourteen frame buffer on Desktop SPARCsystems with the SX graphics option. @@ -1347,7 +1283,6 @@ config FB_P9100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the P9100 card supported on Sparcbook 3 machines. @@ -1358,7 +1293,6 @@ config FB_LEO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the SBUS-based Sun ZX (leo) frame buffer cards. @@ -1373,7 +1307,6 @@ config FB_IGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the framebuffer device for the INTERGRAPHICS 1680 and successor frame buffer cards. @@ -1384,7 +1317,6 @@ config FB_HIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help This is the frame buffer device driver for the Hitachi HD64461 LCD frame buffer card. @@ -1395,7 +1327,6 @@ config FB_PMAG_AA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1) used mainly in the MIPS-based DECstation series. @@ -1406,7 +1337,6 @@ config FB_PMAG_BA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8) used mainly in the MIPS-based DECstation series. @@ -1417,7 +1347,6 @@ config FB_PMAGB_B select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the PMAGB-B TURBOchannel framebuffer card used mainly in the MIPS-based DECstation series. The card is currently only @@ -1429,7 +1358,6 @@ config FB_MAXINE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Support for the onboard framebuffer (1024x768x8) in the Personal DECstation series (Personal DECstation 5000/20, /25, /33, /50, @@ -1441,7 +1369,6 @@ config FB_TX3912 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The TX3912 is a Toshiba RISC processor based on the MIPS 3900 core see <http://www.toshiba.com/taec/components/Generic/risc/tx3912.htm>. @@ -1454,7 +1381,6 @@ config FB_G364 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help The G364 driver is the framebuffer used in MIPS Magnum 4000 and Olivetti M700-10 systems. @@ -1465,7 +1391,6 @@ config FB_68328 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR help Say Y here if you want to support the built-in frame buffer of the Motorola 68328 CPU family. @@ -1476,7 +1401,6 @@ config FB_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1511,7 +1435,6 @@ config FB_W100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. @@ -1528,7 +1451,6 @@ config FB_S3C2410 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- Frame buffer driver for the built-in LCD controller in the Samsung S3C2410 processor. @@ -1552,7 +1474,6 @@ config FB_VIRTUAL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_SOFT_CURSOR ---help--- This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics |
