diff options
Diffstat (limited to 'drivers/usb')
34 files changed, 321 insertions, 95 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5357d83bbda2..5e056064259c 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1829,6 +1829,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x1576, 0x03b1), /* Maretron USB100 */ .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ }, + { USB_DEVICE(0xfff0, 0x0100), /* DATECS FP-2000 */ + .driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */ + }, { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */ .driver_info = CLEAR_HALT_CONDITIONS, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index ab1bb3b538ac..7f277b092b5b 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1888,7 +1888,7 @@ void usb_hcd_flush_endpoint(struct usb_device *udev, /* No more submits can occur */ spin_lock_irq(&hcd_urb_list_lock); rescan: - list_for_each_entry (urb, &ep->urb_list, urb_list) { + list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) { int is_in; if (urb->unlinked) @@ -2485,6 +2485,8 @@ void usb_hc_died (struct usb_hcd *hcd) } if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) { hcd = hcd->shared_hcd; + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + set_bit(HCD_FLAG_DEAD, &hcd->flags); if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6e6797d145dd..822f8c50e423 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -4725,7 +4725,8 @@ hub_power_remaining(struct usb_hub *hub) static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, u16 portchange) { - int status, i; + int status = -ENODEV; + int i; unsigned unit_load; struct usb_device *hdev = hub->hdev; struct usb_hcd *hcd = bus_to_hcd(hdev->bus); @@ -4929,9 +4930,10 @@ loop: done: hub_port_disable(hub, port1, 1); - if (hcd->driver->relinquish_port && !hub->hdev->parent) - hcd->driver->relinquish_port(hcd, port1); - + if (hcd->driver->relinquish_port && !hub->hdev->parent) { + if (status != -ENOTCONN && status != -ENODEV) + hcd->driver->relinquish_port(hcd, port1); + } } /* Handle physical or logical connection change events. diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 3116edfcdc18..574da2b4529c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -150,6 +150,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* appletouch */ { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */ + { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM }, + /* Avision AV600U */ { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -249,6 +252,7 @@ static const struct usb_device_id usb_amd_resume_quirk_list[] = { { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME }, /* Logitech Optical Mouse M90/M100 */ { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index bc3b3fda5000..c4066cd77e47 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3573,6 +3573,9 @@ irq_retry: /* Report disconnection if it is not already done. */ dwc2_hsotg_disconnect(hsotg); + /* Reset device address to zero */ + __bic32(hsotg->regs + DCFG, DCFG_DEVADDR_MASK); + if (usb_status & GOTGCTL_BSESVLD && connected) dwc2_hsotg_core_init_disconnected(hsotg, true); } diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 326b302fc440..03474d3575ab 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -766,15 +766,15 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc->maximum_speed = USB_SPEED_HIGH; } - ret = dwc3_core_soft_reset(dwc); + ret = dwc3_core_get_phy(dwc); if (ret) goto err0; - ret = dwc3_phy_setup(dwc); + ret = dwc3_core_soft_reset(dwc); if (ret) goto err0; - ret = dwc3_core_get_phy(dwc); + ret = dwc3_phy_setup(dwc); if (ret) goto err0; diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 98926504b55b..f5aaa0cf3873 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -512,15 +512,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) /* check the DMA Status */ reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG); - irq_set_status_flags(omap->irq, IRQ_NOAUTOEN); - ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, - dwc3_omap_interrupt_thread, IRQF_SHARED, - "dwc3-omap", omap); - if (ret) { - dev_err(dev, "failed to request IRQ #%d --> %d\n", - omap->irq, ret); - goto err1; - } ret = dwc3_omap_extcon_register(omap); if (ret < 0) @@ -532,8 +523,15 @@ static int dwc3_omap_probe(struct platform_device *pdev) goto err1; } + ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt, + dwc3_omap_interrupt_thread, IRQF_SHARED, + "dwc3-omap", omap); + if (ret) { + dev_err(dev, "failed to request IRQ #%d --> %d\n", + omap->irq, ret); + goto err1; + } dwc3_omap_enable_irqs(omap); - enable_irq(omap->irq); return 0; err1: diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9e41605a276b..f064f1549333 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -191,14 +191,16 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, req->started = false; list_del(&req->list); - req->trb = NULL; req->remaining = 0; if (req->request.status == -EINPROGRESS) req->request.status = status; - usb_gadget_unmap_request_by_dev(dwc->sysdev, - &req->request, req->direction); + if (req->trb) + usb_gadget_unmap_request_by_dev(dwc->sysdev, + &req->request, req->direction); + + req->trb = NULL; trace_dwc3_gadget_giveback(req); @@ -894,9 +896,40 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, if (!node) { trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; + /* + * USB Specification 2.0 Section 5.9.2 states that: "If + * there is only a single transaction in the microframe, + * only a DATA0 data packet PID is used. If there are + * two transactions per microframe, DATA1 is used for + * the first transaction data packet and DATA0 is used + * for the second transaction data packet. If there are + * three transactions per microframe, DATA2 is used for + * the first transaction data packet, DATA1 is used for + * the second, and DATA0 is used for the third." + * + * IOW, we should satisfy the following cases: + * + * 1) length <= maxpacket + * - DATA0 + * + * 2) maxpacket < length <= (2 * maxpacket) + * - DATA1, DATA0 + * + * 3) (2 * maxpacket) < length <= (3 * maxpacket) + * - DATA2, DATA1, DATA0 + */ if (speed == USB_SPEED_HIGH) { struct usb_ep *ep = &dep->endpoint; - trb->size |= DWC3_TRB_SIZE_PCM1(ep->mult - 1); + unsigned int mult = ep->mult - 1; + unsigned int maxp = usb_endpoint_maxp(ep->desc); + + if (length <= (2 * maxp)) + mult--; + + if (length <= maxp) + mult--; + + trb->size |= DWC3_TRB_SIZE_PCM1(mult); } } else { trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index e80b9c123a9d..f95bddd6513f 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -2490,7 +2490,7 @@ static int fsg_main_thread(void *common_) int i; down_write(&common->filesem); - for (i = 0; i < ARRAY_SIZE(common->luns); --i) { + for (i = 0; i < ARRAY_SIZE(common->luns); i++) { struct fsg_lun *curlun = common->luns[i]; if (!curlun || !fsg_lun_is_open(curlun)) continue; diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c index 8656f84e17d9..29efbedc91f9 100644 --- a/drivers/usb/gadget/function/f_uac1.c +++ b/drivers/usb/gadget/function/f_uac1.c @@ -92,9 +92,9 @@ static struct uac_input_terminal_descriptor usb_out_it_desc = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_INPUT_TERMINAL, .bTerminalID = USB_OUT_IT_ID, - .wTerminalType = UAC_TERMINAL_STREAMING, + .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING), .bAssocTerminal = 0, - .wChannelConfig = 0x3, + .wChannelConfig = cpu_to_le16(0x3), }; #define IO_OUT_OT_ID 2 @@ -103,7 +103,7 @@ static struct uac1_output_terminal_descriptor io_out_ot_desc = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, .bTerminalID = IO_OUT_OT_ID, - .wTerminalType = UAC_OUTPUT_TERMINAL_SPEAKER, + .wTerminalType = cpu_to_le16(UAC_OUTPUT_TERMINAL_SPEAKER), .bAssocTerminal = 0, .bSourceID = USB_OUT_IT_ID, }; @@ -114,9 +114,9 @@ static struct uac_input_terminal_descriptor io_in_it_desc = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_INPUT_TERMINAL, .bTerminalID = IO_IN_IT_ID, - .wTerminalType = UAC_INPUT_TERMINAL_MICROPHONE, + .wTerminalType = cpu_to_le16(UAC_INPUT_TERMINAL_MICROPHONE), .bAssocTerminal = 0, - .wChannelConfig = 0x3, + .wChannelConfig = cpu_to_le16(0x3), }; #define USB_IN_OT_ID 4 @@ -125,7 +125,7 @@ static struct uac1_output_terminal_descriptor usb_in_ot_desc = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = UAC_OUTPUT_TERMINAL, .bTerminalID = USB_IN_OT_ID, - .wTerminalType = UAC_TERMINAL_STREAMING, + .wTerminalType = cpu_to_le16(UAC_TERMINAL_STREAMING), .bAssocTerminal = 0, .bSourceID = IO_IN_IT_ID, }; @@ -174,7 +174,7 @@ static struct uac1_as_header_descriptor as_out_header_desc = { .bDescriptorSubtype = UAC_AS_GENERAL, .bTerminalLink = USB_OUT_IT_ID, .bDelay = 1, - .wFormatTag = UAC_FORMAT_TYPE_I_PCM, + .wFormatTag = cpu_to_le16(UAC_FORMAT_TYPE_I_PCM), }; static struct uac1_as_header_descriptor as_in_header_desc = { @@ -183,7 +183,7 @@ static struct uac1_as_header_descriptor as_in_header_desc = { .bDescriptorSubtype = UAC_AS_GENERAL, .bTerminalLink = USB_IN_OT_ID, .bDelay = 1, - .wFormatTag = UAC_FORMAT_TYPE_I_PCM, + .wFormatTag = cpu_to_le16(UAC_FORMAT_TYPE_I_PCM), }; DECLARE_UAC_FORMAT_TYPE_I_DISCRETE_DESC(1); @@ -606,8 +606,8 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f) if (status) goto fail; - audio->out_ep_maxpsize = as_out_ep_desc.wMaxPacketSize; - audio->in_ep_maxpsize = as_in_ep_desc.wMaxPacketSize; + audio->out_ep_maxpsize = le16_to_cpu(as_out_ep_desc.wMaxPacketSize); + audio->in_ep_maxpsize = le16_to_cpu(as_in_ep_desc.wMaxPacketSize); audio->params.c_chmask = audio_opts->c_chmask; audio->params.c_srate = audio_opts->c_srate; audio->params.c_ssize = audio_opts->c_ssize; diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 9082ce261e70..f05c3f3e6103 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -168,7 +168,7 @@ static struct uac2_input_terminal_descriptor usb_out_it_desc = { .bAssocTerminal = 0, .bCSourceID = USB_OUT_CLK_ID, .iChannelNames = 0, - .bmControls = (CONTROL_RDWR << COPY_CTRL), + .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; /* Input Terminal for I/O-In */ @@ -182,7 +182,7 @@ static struct uac2_input_terminal_descriptor io_in_it_desc = { .bAssocTerminal = 0, .bCSourceID = USB_IN_CLK_ID, .iChannelNames = 0, - .bmControls = (CONTROL_RDWR << COPY_CTRL), + .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; /* Ouput Terminal for USB_IN */ @@ -196,7 +196,7 @@ static struct uac2_output_terminal_descriptor usb_in_ot_desc = { .bAssocTerminal = 0, .bSourceID = IO_IN_IT_ID, .bCSourceID = USB_IN_CLK_ID, - .bmControls = (CONTROL_RDWR << COPY_CTRL), + .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; /* Ouput Terminal for I/O-Out */ @@ -210,7 +210,7 @@ static struct uac2_output_terminal_descriptor io_out_ot_desc = { .bAssocTerminal = 0, .bSourceID = USB_OUT_IT_ID, .bCSourceID = USB_OUT_CLK_ID, - .bmControls = (CONTROL_RDWR << COPY_CTRL), + .bmControls = cpu_to_le16(CONTROL_RDWR << COPY_CTRL), }; static struct uac2_ac_header_descriptor ac_hdr_desc = { @@ -220,9 +220,10 @@ static struct uac2_ac_header_descriptor ac_hdr_desc = { .bDescriptorSubtype = UAC_MS_HEADER, .bcdADC = cpu_to_le16(0x200), .bCategory = UAC2_FUNCTION_IO_BOX, - .wTotalLength = sizeof in_clk_src_desc + sizeof out_clk_src_desc - + sizeof usb_out_it_desc + sizeof io_in_it_desc - + sizeof usb_in_ot_desc + sizeof io_out_ot_desc, + .wTotalLength = cpu_to_le16(sizeof in_clk_src_desc + + sizeof out_clk_src_desc + sizeof usb_out_it_desc + + sizeof io_in_it_desc + sizeof usb_in_ot_desc + + sizeof io_out_ot_desc), .bmControls = 0, }; @@ -569,10 +570,12 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn) return ret; } - agdev->in_ep_maxpsize = max(fs_epin_desc.wMaxPacketSize, - hs_epin_desc.wMaxPacketSize); - agdev->out_ep_maxpsize = max(fs_epout_desc.wMaxPacketSize, - hs_epout_desc.wMaxPacketSize); + agdev->in_ep_maxpsize = max_t(u16, + le16_to_cpu(fs_epin_desc.wMaxPacketSize), + le16_to_cpu(hs_epin_desc.wMaxPacketSize)); + agdev->out_ep_maxpsize = max_t(u16, + le16_to_cpu(fs_epout_desc.wMaxPacketSize), + le16_to_cpu(hs_epout_desc.wMaxPacketSize)); hs_epout_desc.bEndpointAddress = fs_epout_desc.bEndpointAddress; hs_epin_desc.bEndpointAddress = fs_epin_desc.bEndpointAddress; diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 9ffb11ec9ed9..7cd5c969fcbe 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -192,7 +192,7 @@ config USB_RENESAS_USBHS_UDC config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' depends on ARCH_RENESAS || COMPILE_TEST - depends on EXTCON + depends on EXTCON && HAS_DMA help Renesas USB3.0 Peripheral controller is a USB peripheral controller that supports super, high, and full speed USB 3.0 data transfers. @@ -257,6 +257,7 @@ config USB_MV_U3D config USB_SNP_CORE depends on (USB_AMD5536UDC || USB_SNP_UDC_PLAT) + depends on HAS_DMA tristate help This enables core driver support for Synopsys USB 2.0 Device @@ -271,7 +272,7 @@ config USB_SNP_CORE config USB_SNP_UDC_PLAT tristate "Synopsys USB 2.0 Device controller" - depends on (USB_GADGET && OF) + depends on USB_GADGET && OF && HAS_DMA select USB_GADGET_DUALSPEED select USB_SNP_CORE default ARCH_BCM_IPROC diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index d8278322d5ac..e1de8fe599a3 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -89,6 +89,9 @@ /* USB_COM_CON */ #define USB_COM_CON_CONF BIT(24) +#define USB_COM_CON_PN_WDATAIF_NL BIT(23) +#define USB_COM_CON_PN_RDATAIF_NL BIT(22) +#define USB_COM_CON_PN_LSTTR_PP BIT(21) #define USB_COM_CON_SPD_MODE BIT(17) #define USB_COM_CON_EP0_EN BIT(16) #define USB_COM_CON_DEV_ADDR_SHIFT 8 @@ -686,6 +689,9 @@ static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) { usb3_init_axi_bridge(usb3); usb3_init_epc_registers(usb3); + usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL | + USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP, + USB3_USB_COM_CON); usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA); usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA); @@ -832,21 +838,32 @@ static struct renesas_usb3_request *usb3_get_request(struct renesas_usb3_ep return usb3_req; } -static void usb3_request_done(struct renesas_usb3_ep *usb3_ep, - struct renesas_usb3_request *usb3_req, int status) +static void __usb3_request_done(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, + int status) { struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); - unsigned long flags; dev_dbg(usb3_to_dev(usb3), "giveback: ep%2d, %u, %u, %d\n", usb3_ep->num, usb3_req->req.length, usb3_req->req.actual, status); usb3_req->req.status = status; - spin_lock_irqsave(&usb3->lock, flags); usb3_ep->started = false; list_del_init(&usb3_req->queue); - spin_unlock_irqrestore(&usb3->lock, flags); + spin_unlock(&usb3->lock); usb_gadget_giveback_request(&usb3_ep->ep, &usb3_req->req); + spin_lock(&usb3->lock); +} + +static void usb3_request_done(struct renesas_usb3_ep *usb3_ep, + struct renesas_usb3_request *usb3_req, int status) +{ + struct renesas_usb3 *usb3 = usb3_ep_to_usb3(usb3_ep); + unsigned long flags; + + spin_lock_irqsave(&usb3->lock, flags); + __usb3_request_done(usb3_ep, usb3_req, status); + spin_unlock_irqrestore(&usb3->lock, flags); } static void usb3_irq_epc_pipe0_status_end(struct renesas_usb3 *usb3) @@ -1369,7 +1386,7 @@ static int renesas_usb3_dma_free_prd(struct renesas_usb3 *usb3, usb3_for_each_dma(usb3, dma, i) { if (dma->prd) { - dma_free_coherent(dev, USB3_DMA_MAX_XFER_SIZE, + dma_free_coherent(dev, USB3_DMA_PRD_SIZE, dma->prd, dma->prd_dma); dma->prd = NULL; } @@ -1409,12 +1426,12 @@ static void usb3_start_pipen(struct renesas_usb3_ep *usb3_ep, int ret = -EAGAIN; u32 enable_bits = 0; + spin_lock_irqsave(&usb3->lock, flags); if (usb3_ep->halt || usb3_ep->started) - return; + goto out; if (usb3_req != usb3_req_first) - return; + goto out; - spin_lock_irqsave(&usb3->lock, flags); if (usb3_pn_change(usb3, usb3_ep->num) < 0) goto out; diff --git a/drivers/usb/gadget/udc/snps_udc_plat.c b/drivers/usb/gadget/udc/snps_udc_plat.c index 2e11f19e07ae..f7b4d0f159e4 100644 --- a/drivers/usb/gadget/udc/snps_udc_plat.c +++ b/drivers/usb/gadget/udc/snps_udc_plat.c @@ -28,7 +28,7 @@ /* description */ #define UDC_MOD_DESCRIPTION "Synopsys UDC platform driver" -void start_udc(struct udc *udc) +static void start_udc(struct udc *udc) { if (udc->driver) { dev_info(udc->dev, "Connecting...\n"); @@ -38,7 +38,7 @@ void start_udc(struct udc *udc) } } -void stop_udc(struct udc *udc) +static void stop_udc(struct udc *udc) { int tmp; u32 reg; @@ -76,7 +76,7 @@ void stop_udc(struct udc *udc) dev_info(udc->dev, "Device disconnected\n"); } -void udc_drd_work(struct work_struct *work) +static void udc_drd_work(struct work_struct *work) { struct udc *udc; diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index a9a1e4c40480..c8f38649f749 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -77,6 +77,16 @@ #define USB_INTEL_USB3_PSSEN 0xD8 #define USB_INTEL_USB3PRM 0xDC +/* ASMEDIA quirk use */ +#define ASMT_DATA_WRITE0_REG 0xF8 +#define ASMT_DATA_WRITE1_REG 0xFC +#define ASMT_CONTROL_REG 0xE0 +#define ASMT_CONTROL_WRITE_BIT 0x02 +#define ASMT_WRITEREG_CMD 0x10423 +#define ASMT_FLOWCTL_ADDR 0xFA30 +#define ASMT_FLOWCTL_DATA 0xBA +#define ASMT_PSEUDO_DATA 0 + /* * amd_chipset_gen values represent AMD different chipset generations */ @@ -88,6 +98,7 @@ enum amd_chipset_gen { AMD_CHIPSET_HUDSON2, AMD_CHIPSET_BOLTON, AMD_CHIPSET_YANGTZE, + AMD_CHIPSET_TAISHAN, AMD_CHIPSET_UNKNOWN, }; @@ -131,6 +142,11 @@ static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo) pinfo->sb_type.gen = AMD_CHIPSET_SB700; else if (rev >= 0x40 && rev <= 0x4f) pinfo->sb_type.gen = AMD_CHIPSET_SB800; + } + pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x145c, NULL); + if (pinfo->smbus_dev) { + pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN; } else { pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL); @@ -250,11 +266,12 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev) { /* Make sure amd chipset type has already been initialized */ usb_amd_find_chipset_info(); - if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE) - return 0; - - dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n"); - return 1; + if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE || + amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) { + dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n"); + return 1; + } + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk); @@ -412,6 +429,50 @@ void usb_amd_quirk_pll_disable(void) } EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); +static int usb_asmedia_wait_write(struct pci_dev *pdev) +{ + unsigned long retry_count; + unsigned char value; + + for (retry_count = 1000; retry_count > 0; --retry_count) { + + pci_read_config_byte(pdev, ASMT_CONTROL_REG, &value); + + if (value == 0xff) { + dev_err(&pdev->dev, "%s: check_ready ERROR", __func__); + return -EIO; + } + + if ((value & ASMT_CONTROL_WRITE_BIT) == 0) + return 0; + + usleep_range(40, 60); + } + + dev_warn(&pdev->dev, "%s: check_write_ready timeout", __func__); + return -ETIMEDOUT; +} + +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) +{ + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send command and address to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_WRITEREG_CMD); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_FLOWCTL_ADDR); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); + + if (usb_asmedia_wait_write(pdev) != 0) + return; + + /* send data to device */ + pci_write_config_dword(pdev, ASMT_DATA_WRITE0_REG, ASMT_FLOWCTL_DATA); + pci_write_config_dword(pdev, ASMT_DATA_WRITE1_REG, ASMT_PSEUDO_DATA); + pci_write_config_byte(pdev, ASMT_CONTROL_REG, ASMT_CONTROL_WRITE_BIT); +} +EXPORT_SYMBOL_GPL(usb_asmedia_modifyflowcontrol); + void usb_amd_quirk_pll_enable(void) { usb_amd_quirk_pll(0); @@ -1096,3 +1157,23 @@ static void quirk_usb_early_handoff(struct pci_dev *pdev) } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); + +bool usb_xhci_needs_pci_reset(struct pci_dev *pdev) +{ + /* + * Our dear uPD72020{1,2} friend only partially resets when + * asked to via the XHCI interface, and may end up doing DMA + * at the wrong addresses, as it keeps the top 32bit of some + * addresses from its previous programming under obscure + * circumstances. + * Give it a good wack at probe time. Unfortunately, this + * needs to happen before we've had a chance to discover any + * quirk, or the system will be in a rather bad state. + */ + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + (pdev->device == 0x0014 || pdev->device == 0x0015)) + return true; + + return false; +} +EXPORT_SYMBOL_GPL(usb_xhci_needs_pci_reset); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 0222195bd5b0..5582cbafecd4 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -11,13 +11,16 @@ bool usb_amd_prefetch_quirk(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); +void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev); void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev); void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); void sb800_prefetch(struct device *dev, int on); +bool usb_xhci_needs_pci_reset(struct pci_dev *pdev); #else struct pci_dev; static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} +static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {} static inline void usb_amd_dev_put(void) {} static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} static inline void sb800_prefetch(struct device *dev, int on) {} diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1adae9eab831..00721e8807ab 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -398,14 +398,21 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend) spin_lock_irqsave(&xhci->lock, flags); for (i = LAST_EP_INDEX; i > 0; i--) { if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue) { + struct xhci_ep_ctx *ep_ctx; struct xhci_command *command; + + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, i); + + /* Check ep is running, required by AMD SNPS 3.1 xHC */ + if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_RUNNING) + continue; + command = xhci_alloc_command(xhci, false, false, GFP_NOWAIT); if (!command) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_free_command(xhci, cmd); return -ENOMEM; - } xhci_queue_stop_endpoint(xhci, command, slot_id, i, suspend); @@ -603,12 +610,14 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, /* Disable all Device Slots */ xhci_dbg(xhci, "Disable all slots\n"); + spin_unlock_irqrestore(&xhci->lock, *flags); for (i = 1; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) { retval = xhci_disable_slot(xhci, NULL, i); if (retval) xhci_err(xhci, "Failed to disable slot %d, %d. Enter test mode anyway\n", i, retval); } + spin_lock_irqsave(&xhci->lock, *flags); /* Put all ports to the Disable state by clear PP */ xhci_dbg(xhci, "Disable all port (PP = 0)\n"); /* Power off USB3 ports*/ @@ -897,6 +906,9 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, clear_bit(wIndex, &bus_state->resuming_ports); set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port_array, wIndex, + PORT_PLC); xhci_set_link_state(xhci, port_array, wIndex, XDEV_U0); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 53882e2babbb..8071c8fdd15e 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -59,6 +59,8 @@ #define PCI_DEVICE_ID_AMD_PROMONTORYA_2 0x43bb #define PCI_DEVICE_ID_AMD_PROMONTORYA_1 0x43bc +#define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI 0x1142 + static const char hcd_name[] = "xhci_hcd"; static struct hc_driver __read_mostly xhci_pci_hc_driver; @@ -217,6 +219,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x1142) xhci->quirks |= XHCI_TRUST_TX_LENGTH; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) + xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL; + if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7; @@ -278,6 +284,13 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) driver = (struct hc_driver *)id->driver_data; + /* For some HW implementation, a XHCI reset is just not enough... */ + if (usb_xhci_needs_pci_reset(dev)) { + dev_info(&dev->dev, "Resetting\n"); + if (pci_reset_function_locked(dev)) + dev_warn(&dev->dev, "Reset failed"); + } + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ pm_runtime_get_noresume(&dev->dev); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index c50c902d009e..cc368ad2b51e 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -864,13 +864,16 @@ static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, (ep->ep_state & EP_GETTING_NO_STREAMS)) { int stream_id; - for (stream_id = 0; stream_id < ep->stream_info->num_streams; + for (stream_id = 1; stream_id < ep->stream_info->num_streams; stream_id++) { + ring = ep->stream_info->stream_rings[stream_id]; + if (!ring) + continue; + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Killing URBs for slot ID %u, ep index %u, stream %u", - slot_id, ep_index, stream_id + 1); - xhci_kill_ring_urbs(xhci, - ep->stream_info->stream_rings[stream_id]); + slot_id, ep_index, stream_id); + xhci_kill_ring_urbs(xhci, ring); } } else { ring = ep->ring; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 56f85df013db..b2ff1ff1a02f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -198,6 +198,9 @@ int xhci_reset(struct xhci_hcd *xhci) if (ret) return ret; + if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL) + usb_asmedia_modifyflowcontrol(to_pci_dev(xhci_to_hcd(xhci)->self.controller)); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Wait for controller to be ready for doorbell rings"); /* @@ -622,8 +625,10 @@ int xhci_run(struct usb_hcd *hcd) if (!command) return -ENOMEM; - xhci_queue_vendor_command(xhci, command, 0, 0, 0, + ret = xhci_queue_vendor_command(xhci, command, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); + if (ret) + xhci_free_command(xhci, command); } xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_run for USB2 roothub"); @@ -1085,6 +1090,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); + if (xhci->quirks & XHCI_ASMEDIA_MODIFY_FLOWCONTROL) + usb_asmedia_modifyflowcontrol(to_pci_dev(hcd->self.controller)); + /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3c6da1f93c84..e3e935291ed6 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1820,6 +1820,7 @@ struct xhci_hcd { #define XHCI_BROKEN_PORT_PED (1 << 25) #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26) #define XHCI_U2_DISABLE_WAKE (1 << 27) +#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28) unsigned int num_active_eps; unsigned int limit_active_eps; diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 76decb8011eb..3344ffd5bb13 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -139,6 +139,7 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep) "Could not flush host TX%d fifo: csr: %04x\n", ep->epnum, csr)) return; + mdelay(1); } } diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8fb86a5f458e..3d0dd2f97415 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -197,6 +197,7 @@ struct msm_otg { struct regulator *v3p3; struct regulator *v1p8; struct regulator *vddcx; + struct regulator_bulk_data supplies[3]; struct reset_control *phy_rst; struct reset_control *link_rst; @@ -1731,7 +1732,6 @@ static int msm_otg_reboot_notify(struct notifier_block *this, static int msm_otg_probe(struct platform_device *pdev) { - struct regulator_bulk_data regs[3]; int ret = 0; struct device_node *np = pdev->dev.of_node; struct msm_otg_platform_data *pdata; @@ -1817,17 +1817,18 @@ static int msm_otg_probe(struct platform_device *pdev) return motg->irq; } - regs[0].supply = "vddcx"; - regs[1].supply = "v3p3"; - regs[2].supply = "v1p8"; + motg->supplies[0].supply = "vddcx"; + motg->supplies[1].supply = "v3p3"; + motg->supplies[2].supply = "v1p8"; - ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs); + ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(motg->supplies), + motg->supplies); if (ret) return ret; - motg->vddcx = regs[0].consumer; - motg->v3p3 = regs[1].consumer; - motg->v1p8 = regs[2].consumer; + motg->vddcx = motg->supplies[0].consumer; + motg->v3p3 = motg->supplies[1].consumer; + motg->v1p8 = motg->supplies[2].consumer; clk_set_rate(motg->clk, 60000000); diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 623c51300393..f0ce304c5aaf 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -752,8 +752,10 @@ static int usbhsc_resume(struct device *dev) struct usbhs_priv *priv = dev_get_drvdata(dev); struct platform_device *pdev = usbhs_priv_to_pdev(priv); - if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { usbhsc_power_ctrl(priv, 1); + usbhs_mod_autonomy_mode(priv); + } usbhs_platform_call(priv, phy_reset, pdev); diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 5bc7a6138855..2c8161bcf5b5 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -37,6 +37,7 @@ struct usbhsg_gpriv; struct usbhsg_uep { struct usb_ep ep; struct usbhs_pipe *pipe; + spinlock_t lock; /* protect the pipe */ char ep_name[EP_NAME_SIZE]; @@ -636,10 +637,13 @@ usbhsg_ep_enable_end: static int usbhsg_ep_disable(struct usb_ep *ep) { struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); - struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); + struct usbhs_pipe *pipe; + unsigned long flags; + spin_lock_irqsave(&uep->lock, flags); + pipe = usbhsg_uep_to_pipe(uep); if (!pipe) - return -EINVAL; + goto out; usbhsg_pipe_disable(uep); usbhs_pipe_free(pipe); @@ -647,6 +651,9 @@ static int usbhsg_ep_disable(struct usb_ep *ep) uep->pipe->mod_private = NULL; uep->pipe = NULL; +out: + spin_unlock_irqrestore(&uep->lock, flags); + return 0; } @@ -696,8 +703,11 @@ static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) { struct usbhsg_uep *uep = usbhsg_ep_to_uep(ep); struct usbhsg_request *ureq = usbhsg_req_to_ureq(req); - struct usbhs_pipe *pipe = usbhsg_uep_to_pipe(uep); + struct usbhs_pipe *pipe; + unsigned long flags; + spin_lock_irqsave(&uep->lock, flags); + pipe = usbhsg_uep_to_pipe(uep); if (pipe) usbhs_pkt_pop(pipe, usbhsg_ureq_to_pkt(ureq)); @@ -706,6 +716,7 @@ static int usbhsg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) * even if the pipe is NULL. */ usbhsg_queue_pop(uep, ureq, -ECONNRESET); + spin_unlock_irqrestore(&uep->lock, flags); return 0; } @@ -852,10 +863,10 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); struct usbhs_mod *mod = usbhs_mod_get_current(priv); - struct usbhsg_uep *dcp = usbhsg_gpriv_to_dcp(gpriv); + struct usbhsg_uep *uep; struct device *dev = usbhs_priv_to_dev(priv); unsigned long flags; - int ret = 0; + int ret = 0, i; /******************** spin lock ********************/ usbhs_lock(priv, flags); @@ -887,7 +898,9 @@ static int usbhsg_try_stop(struct usbhs_priv *priv, u32 status) usbhs_sys_set_test_mode(priv, 0); usbhs_sys_function_ctrl(priv, 0); - usbhsg_ep_disable(&dcp->ep); + /* disable all eps */ + usbhsg_for_each_uep_with_dcp(uep, gpriv, i) + usbhsg_ep_disable(&uep->ep); dev_dbg(dev, "stop gadget\n"); @@ -1069,6 +1082,7 @@ int usbhs_mod_gadget_probe(struct usbhs_priv *priv) ret = -ENOMEM; goto usbhs_mod_gadget_probe_err_gpriv; } + spin_lock_init(&uep->lock); gpriv->transceiver = usb_get_phy(USB_PHY_TYPE_UNDEFINED); dev_info(dev, "%stransceiver found\n", diff --git a/drivers/usb/renesas_usbhs/rcar3.c b/drivers/usb/renesas_usbhs/rcar3.c index d544b331c9f2..02b67abfc2a1 100644 --- a/drivers/usb/renesas_usbhs/rcar3.c +++ b/drivers/usb/renesas_usbhs/rcar3.c @@ -20,9 +20,13 @@ /* Low Power Status register (LPSTS) */ #define LPSTS_SUSPM 0x4000 -/* USB General control register 2 (UGCTRL2), bit[31:6] should be 0 */ +/* + * USB General control register 2 (UGCTRL2) + * Remarks: bit[31:11] and bit[9:6] should be 0 + */ #define UGCTRL2_RESERVED_3 0x00000001 /* bit[3:0] should be B'0001 */ #define UGCTRL2_USB0SEL_OTG 0x00000030 +#define UGCTRL2_VBUSSEL 0x00000400 static void usbhs_write32(struct usbhs_priv *priv, u32 reg, u32 data) { @@ -34,7 +38,8 @@ static int usbhs_rcar3_power_ctrl(struct platform_device *pdev, { struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); - usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG); + usbhs_write32(priv, UGCTRL2, UGCTRL2_RESERVED_3 | UGCTRL2_USB0SEL_OTG | + UGCTRL2_VBUSSEL); if (enable) { usbhs_bset(priv, LPSTS, LPSTS_SUSPM, LPSTS_SUSPM); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f64e914a8985..2d945c9f975c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -142,6 +142,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */ + { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ebe51f11105d..fe123153b1a5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2025,6 +2025,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */ + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index c9ebefd8f35f..a585b477415d 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -52,6 +52,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID), .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, + { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_UC485), + .driver_info = PL2303_QUIRK_ENDPOINT_HACK }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 09d9be88209e..3b5a15d1dc0d 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -27,6 +27,7 @@ #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 #define ATEN_PRODUCT_ID 0x2008 +#define ATEN_PRODUCT_UC485 0x2021 #define ATEN_PRODUCT_ID2 0x2118 #define IODATA_VENDOR_ID 0x04bb diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index fba4005dd737..6a7720e66595 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1529,8 +1529,11 @@ static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) /* Make sure driver was initialized */ - if (us->extra == NULL) + if (us->extra == NULL) { usb_stor_dbg(us, "ERROR Driver not initialized\n"); + srb->result = DID_ERROR << 16; + return; + } scsi_set_resid(srb, 0); /* scsi_bufflen might change in protocol translation to ata */ diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index cbea9f329e71..cde115359793 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -124,9 +124,9 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999, /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */ UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999, "Initio Corporation", - "", + "INIC-3069", USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_NO_ATA_1X), + US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE), /* Reported-by: Tom Arild Naess <tanaess@gmail.com> */ UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 06615934fed1..0dceb9fa3a06 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -315,6 +315,7 @@ static int usb_stor_control_thread(void * __us) { struct us_data *us = (struct us_data *)__us; struct Scsi_Host *host = us_to_host(us); + struct scsi_cmnd *srb; for (;;) { usb_stor_dbg(us, "*** thread sleeping\n"); @@ -330,6 +331,7 @@ static int usb_stor_control_thread(void * __us) scsi_lock(host); /* When we are called with no command pending, we're done */ + srb = us->srb; if (us->srb == NULL) { scsi_unlock(host); mutex_unlock(&us->dev_mutex); @@ -398,14 +400,11 @@ static int usb_stor_control_thread(void * __us) /* lock access to the state */ scsi_lock(host); - /* indicate that the command is done */ - if (us->srb->result != DID_ABORT << 16) { - usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", - us->srb->result); - us->srb->scsi_done(us->srb); - } else { + /* was the command aborted? */ + if (us->srb->result == DID_ABORT << 16) { SkipForAbort: usb_stor_dbg(us, "scsi command aborted\n"); + srb = NULL; /* Don't call srb->scsi_done() */ } /* @@ -429,6 +428,13 @@ SkipForAbort: /* unlock the device pointers */ mutex_unlock(&us->dev_mutex); + + /* now that the locks are released, notify the SCSI core */ + if (srb) { + usb_stor_dbg(us, "scsi cmd done, result=0x%x\n", + srb->result); + srb->scsi_done(srb); + } } /* for (;;) */ /* Wait until we are told to stop */ diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 6b0d2f0918c6..8a88f45822e3 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -3,6 +3,7 @@ #define __DRIVER_USB_TYPEC_UCSI_H #include <linux/bitops.h> +#include <linux/device.h> #include <linux/types.h> /* -------------------------------------------------------------------------- */ |
