summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/Makefile1
-rw-r--r--drivers/usb/atm/cxacru.c411
-rw-r--r--drivers/usb/atm/usbatm.c27
-rw-r--r--drivers/usb/class/cdc-acm.c81
-rw-r--r--drivers/usb/class/cdc-acm.h3
-rw-r--r--drivers/usb/core/Kconfig25
-rw-r--r--drivers/usb/core/devices.c2
-rw-r--r--drivers/usb/core/devio.c109
-rw-r--r--drivers/usb/core/driver.c267
-rw-r--r--drivers/usb/core/hcd.c34
-rw-r--r--drivers/usb/core/hcd.h3
-rw-r--r--drivers/usb/core/hub.c29
-rw-r--r--drivers/usb/core/inode.c2
-rw-r--r--drivers/usb/core/message.c83
-rw-r--r--drivers/usb/core/quirks.c2
-rw-r--r--drivers/usb/core/sysfs.c102
-rw-r--r--drivers/usb/core/usb.c46
-rw-r--r--drivers/usb/core/usb.h26
-rw-r--r--drivers/usb/gadget/Kconfig22
-rw-r--r--drivers/usb/gadget/Makefile1
-rw-r--r--drivers/usb/gadget/ether.c7
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.c2500
-rw-r--r--drivers/usb/gadget/fsl_usb2_udc.h579
-rw-r--r--drivers/usb/gadget/gadget_chips.h8
-rw-r--r--drivers/usb/gadget/pxa2xx_udc.c98
-rw-r--r--drivers/usb/gadget/rndis.h2
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-fsl.h4
-rw-r--r--drivers/usb/host/ehci-hub.c4
-rw-r--r--drivers/usb/host/hc_crisv10.c4550
-rw-r--r--drivers/usb/host/hc_crisv10.h289
-rw-r--r--drivers/usb/host/ohci-hcd.c6
-rw-r--r--drivers/usb/host/ohci-pci.c32
-rw-r--r--drivers/usb/host/uhci-q.c16
-rw-r--r--drivers/usb/input/ati_remote2.c89
-rw-r--r--drivers/usb/input/gtco.c5
-rw-r--r--drivers/usb/misc/adutux.c48
-rw-r--r--drivers/usb/misc/cypress_cy7c63.c4
-rw-r--r--drivers/usb/misc/ftdi-elan.c19
-rw-r--r--drivers/usb/misc/iowarrior.c20
-rw-r--r--drivers/usb/misc/ldusb.c3
-rw-r--r--drivers/usb/misc/usblcd.c7
-rw-r--r--drivers/usb/mon/mon_bin.c14
-rw-r--r--drivers/usb/mon/mon_main.c158
-rw-r--r--drivers/usb/mon/mon_text.c315
-rw-r--r--drivers/usb/mon/usb_mon.h6
-rw-r--r--drivers/usb/net/asix.c8
-rw-r--r--drivers/usb/net/catc.c30
-rw-r--r--drivers/usb/net/dm9601.c5
-rw-r--r--drivers/usb/net/gl620a.c2
-rw-r--r--drivers/usb/net/kaweth.c2
-rw-r--r--drivers/usb/net/net1080.c2
-rw-r--r--drivers/usb/net/pegasus.c14
-rw-r--r--drivers/usb/net/rndis_host.c114
-rw-r--r--drivers/usb/net/rtl8150.c1
-rw-r--r--drivers/usb/net/usbnet.c9
-rw-r--r--drivers/usb/net/usbnet.h1
-rw-r--r--drivers/usb/serial/Kconfig6
-rw-r--r--drivers/usb/serial/aircable.c7
-rw-r--r--drivers/usb/serial/ark3116.c3
-rw-r--r--drivers/usb/serial/cp2101.c2
-rw-r--r--drivers/usb/serial/ftdi_sio.c23
-rw-r--r--drivers/usb/serial/ftdi_sio.h1
-rw-r--r--drivers/usb/serial/io_edgeport.c139
-rw-r--r--drivers/usb/serial/io_edgeport.h6
-rw-r--r--drivers/usb/serial/ipaq.c1
-rw-r--r--drivers/usb/serial/kl5kusb105.c28
-rw-r--r--drivers/usb/serial/mct_u232.c12
-rw-r--r--drivers/usb/serial/mos7720.c34
-rw-r--r--drivers/usb/serial/mos7840.c233
-rw-r--r--drivers/usb/serial/omninet.c40
-rw-r--r--drivers/usb/serial/option.c23
-rw-r--r--drivers/usb/serial/sierra.c25
-rw-r--r--drivers/usb/serial/visor.c22
-rw-r--r--drivers/usb/serial/whiteheat.c8
-rw-r--r--drivers/usb/serial/whiteheat.h4
-rw-r--r--drivers/usb/storage/libusual.c3
-rw-r--r--drivers/usb/storage/unusual_devs.h9
-rw-r--r--drivers/usb/usb-skeleton.c41
79 files changed, 5220 insertions, 5698 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 8b7ff467d262..c1b0affae290 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -15,7 +15,6 @@ obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_SL811_HCD) += host/
obj-$(CONFIG_USB_U132_HCD) += host/
-obj-$(CONFIG_ETRAX_USB_HOST) += host/
obj-$(CONFIG_USB_OHCI_AT91) += host/
obj-$(CONFIG_USB_ACM) += class/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 3dfa3e40e148..30b7bfbc985a 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -4,6 +4,7 @@
*
* Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan
* Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru)
+ * Copyright (C) 2007 Simon Arlott
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -34,14 +35,14 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <linux/device.h> /* FIXME: linux/firmware.h should include it itself */
+#include <linux/device.h>
#include <linux/firmware.h>
#include <linux/mutex.h>
#include "usbatm.h"
-#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands"
-#define DRIVER_VERSION "0.2"
+#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott"
+#define DRIVER_VERSION "0.3"
#define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver"
static const char cxacru_driver_name[] = "cxacru";
@@ -64,7 +65,7 @@ static const char cxacru_driver_name[] = "cxacru";
#define SDRAM_ENA 0x1
#define CMD_TIMEOUT 2000 /* msecs */
-#define POLL_INTERVAL 5000 /* msecs */
+#define POLL_INTERVAL 1 /* secs */
/* commands for interaction with the modem through the control channel before
* firmware is loaded */
@@ -146,6 +147,13 @@ enum cxacru_info_idx {
CXINF_MAX = 0x1c,
};
+enum cxacru_poll_state {
+ CXPOLL_STOPPING,
+ CXPOLL_STOPPED,
+ CXPOLL_POLLING,
+ CXPOLL_SHUTDOWN
+};
+
struct cxacru_modem_type {
u32 pll_f_clk;
u32 pll_b_clk;
@@ -158,7 +166,12 @@ struct cxacru_data {
const struct cxacru_modem_type *modem_type;
int line_status;
+ struct mutex adsl_state_serialize;
+ int adsl_status;
struct delayed_work poll_work;
+ u32 card_info[CXINF_MAX];
+ struct mutex poll_state_serialize;
+ int poll_state;
/* contol handles */
struct mutex cm_serialize;
@@ -170,6 +183,275 @@ struct cxacru_data {
struct completion snd_done;
};
+static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm,
+ u8 *wdata, int wsize, u8 *rdata, int rsize);
+static void cxacru_poll_status(struct work_struct *work);
+
+/* Card info exported through sysfs */
+#define CXACRU__ATTR_INIT(_name) \
+static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL)
+
+#define CXACRU_CMD_INIT(_name) \
+static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \
+ cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name)
+
+#define CXACRU_ATTR_INIT(_value, _type, _name) \
+static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct usb_interface *intf = to_usb_interface(dev); \
+ struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); \
+ struct cxacru_data *instance = usbatm_instance->driver_data; \
+ return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \
+} \
+CXACRU__ATTR_INIT(_name)
+
+#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
+#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
+
+#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
+#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
+
+static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", value);
+}
+
+static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", value);
+}
+
+static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
+{
+ if (unlikely(value < 0)) {
+ return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
+ value / 100, -value % 100);
+ } else {
+ return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
+ value / 100, value % 100);
+ }
+}
+
+static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
+{
+ switch (value) {
+ case 0: return snprintf(buf, PAGE_SIZE, "no\n");
+ case 1: return snprintf(buf, PAGE_SIZE, "yes\n");
+ default: return 0;
+ }
+}
+
+static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf)
+{
+ switch (value) {
+ case 1: return snprintf(buf, PAGE_SIZE, "not connected\n");
+ case 2: return snprintf(buf, PAGE_SIZE, "connected\n");
+ case 3: return snprintf(buf, PAGE_SIZE, "lost\n");
+ default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value);
+ }
+}
+
+static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf)
+{
+ switch (value) {
+ case 0: return snprintf(buf, PAGE_SIZE, "down\n");
+ case 1: return snprintf(buf, PAGE_SIZE, "attempting to activate\n");
+ case 2: return snprintf(buf, PAGE_SIZE, "training\n");
+ case 3: return snprintf(buf, PAGE_SIZE, "channel analysis\n");
+ case 4: return snprintf(buf, PAGE_SIZE, "exchange\n");
+ case 5: return snprintf(buf, PAGE_SIZE, "up\n");
+ case 6: return snprintf(buf, PAGE_SIZE, "waiting\n");
+ case 7: return snprintf(buf, PAGE_SIZE, "initialising\n");
+ default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value);
+ }
+}
+
+static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf)
+{
+ switch (value) {
+ case 0: return 0;
+ case 1: return snprintf(buf, PAGE_SIZE, "ANSI T1.413\n");
+ case 2: return snprintf(buf, PAGE_SIZE, "ITU-T G.992.1 (G.DMT)\n");
+ case 3: return snprintf(buf, PAGE_SIZE, "ITU-T G.992.2 (G.LITE)\n");
+ default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value);
+ }
+}
+
+/*
+ * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since
+ * this data is already in atm_dev there's no point.
+ *
+ * MAC_ADDRESS_HIGH = 0x????5544
+ * MAC_ADDRESS_LOW = 0x33221100
+ * Where 00-55 are bytes 0-5 of the MAC.
+ */
+static ssize_t cxacru_sysfs_show_mac_address(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
+ struct atm_dev *atm_dev = usbatm_instance->atm_dev;
+
+ return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ atm_dev->esi[0], atm_dev->esi[1], atm_dev->esi[2],
+ atm_dev->esi[3], atm_dev->esi[4], atm_dev->esi[5]);
+}
+
+static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
+ struct cxacru_data *instance = usbatm_instance->driver_data;
+ u32 value = instance->card_info[CXINF_LINE_STARTABLE];
+
+ switch (value) {
+ case 0: return snprintf(buf, PAGE_SIZE, "running\n");
+ case 1: return snprintf(buf, PAGE_SIZE, "stopped\n");
+ default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value);
+ }
+}
+
+static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct usbatm_data *usbatm_instance = usb_get_intfdata(intf);
+ struct cxacru_data *instance = usbatm_instance->driver_data;
+ int ret;
+ int poll = -1;
+ char str_cmd[8];
+ int len = strlen(buf);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EACCES;
+
+ ret = sscanf(buf, "%7s", str_cmd);
+ if (ret != 1)
+ return -EINVAL;
+ ret = 0;
+
+ if (mutex_lock_interruptible(&instance->adsl_state_serialize))
+ return -ERESTARTSYS;
+
+ if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) {
+ ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0);
+ if (ret < 0) {
+ atm_err(usbatm_instance, "change adsl state:"
+ " CHIP_ADSL_LINE_STOP returned %d\n", ret);
+
+ ret = -EIO;
+ } else {
+ ret = len;
+ poll = CXPOLL_STOPPED;
+ }
+ }
+
+ /* Line status is only updated every second
+ * and the device appears to only react to
+ * START/STOP every second too. Wait 1.5s to
+ * be sure that restart will have an effect. */
+ if (!strcmp(str_cmd, "restart"))
+ msleep(1500);
+
+ if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) {
+ ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
+ if (ret < 0) {
+ atm_err(usbatm_instance, "change adsl state:"
+ " CHIP_ADSL_LINE_START returned %d\n", ret);
+
+ ret = -EIO;
+ } else {
+ ret = len;
+ poll = CXPOLL_POLLING;
+ }
+ }
+
+ if (!strcmp(str_cmd, "poll")) {
+ ret = len;
+ poll = CXPOLL_POLLING;
+ }
+
+ if (ret == 0) {
+ ret = -EINVAL;
+ poll = -1;
+ }
+
+ if (poll == CXPOLL_POLLING) {
+ mutex_lock(&instance->poll_state_serialize);
+ switch (instance->poll_state) {
+ case CXPOLL_STOPPED:
+ /* start polling */
+ instance->poll_state = CXPOLL_POLLING;
+ break;
+
+ case CXPOLL_STOPPING:
+ /* abort stop request */
+ instance->poll_state = CXPOLL_POLLING;
+ case CXPOLL_POLLING:
+ case CXPOLL_SHUTDOWN:
+ /* don't start polling */
+ poll = -1;
+ }
+ mutex_unlock(&instance->poll_state_serialize);
+ } else if (poll == CXPOLL_STOPPED) {
+ mutex_lock(&instance->poll_state_serialize);
+ /* request stop */
+ if (instance->poll_state == CXPOLL_POLLING)
+ instance->poll_state = CXPOLL_STOPPING;
+ mutex_unlock(&instance->poll_state_serialize);
+ }
+
+ mutex_unlock(&instance->adsl_state_serialize);
+
+ if (poll == CXPOLL_POLLING)
+ cxacru_poll_status(&instance->poll_work.work);
+
+ return ret;
+}
+
+/*
+ * All device attributes are included in CXACRU_ALL_FILES
+ * so that the same list can be used multiple times:
+ * INIT (define the device attributes)
+ * CREATE (create all the device files)
+ * REMOVE (remove all the device files)
+ *
+ * With the last two being defined as needed in the functions
+ * they are used in before calling CXACRU_ALL_FILES()
+ */
+#define CXACRU_ALL_FILES(_action) \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE, u32, downstream_rate); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE, u32, upstream_rate); \
+CXACRU_ATTR_##_action(CXINF_LINK_STATUS, LINK, link_status); \
+CXACRU_ATTR_##_action(CXINF_LINE_STATUS, LINE, line_status); \
+CXACRU__ATTR_##_action( mac_address); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN, dB, upstream_snr_margin); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN, dB, downstream_snr_margin); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION, dB, upstream_attenuation); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION, dB, downstream_attenuation); \
+CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER, s8, transmitter_power); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME, u32, upstream_bits_per_frame); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32, downstream_bits_per_frame); \
+CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS, u32, startup_attempts); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS, u32, upstream_crc_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS, u32, downstream_crc_errors); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS, u32, upstream_fec_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS, u32, downstream_fec_errors); \
+CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS, u32, upstream_hec_errors); \
+CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS, u32, downstream_hec_errors); \
+CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE, bool, line_startable); \
+CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \
+CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \
+CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \
+CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \
+CXACRU_CMD_##_action( adsl_state);
+
+CXACRU_ALL_FILES(INIT);
+
/* the following three functions are stolen from drivers/usb/core/message.c */
static void cxacru_blocking_completion(struct urb *urb)
{
@@ -347,8 +629,6 @@ static int cxacru_card_status(struct cxacru_data *instance)
return 0;
}
-static void cxacru_poll_status(struct work_struct *work);
-
static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev)
{
@@ -357,6 +637,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
struct atm_dev *atm_dev = usbatm_instance->atm_dev;
*/
int ret;
+ int start_polling = 1;
dbg("cxacru_atm_start");
@@ -369,14 +650,35 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance,
}
/* start ADSL */
+ mutex_lock(&instance->adsl_state_serialize);
ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0);
if (ret < 0) {
atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret);
+ mutex_unlock(&instance->adsl_state_serialize);
return ret;
}
/* Start status polling */
- cxacru_poll_status(&instance->poll_work.work);
+ mutex_lock(&instance->poll_state_serialize);
+ switch (instance->poll_state) {
+ case CXPOLL_STOPPED:
+ /* start polling */
+ instance->poll_state = CXPOLL_POLLING;
+ break;
+
+ case CXPOLL_STOPPING:
+ /* abort stop request */
+ instance->poll_state = CXPOLL_POLLING;
+ case CXPOLL_POLLING:
+ case CXPOLL_SHUTDOWN:
+ /* don't start polling */
+ start_polling = 0;
+ }
+ mutex_unlock(&instance->poll_state_serialize);
+ mutex_unlock(&instance->adsl_state_serialize);
+
+ if (start_polling)
+ cxacru_poll_status(&instance->poll_work.work);
return 0;
}
@@ -387,14 +689,46 @@ static void cxacru_poll_status(struct work_struct *work)
u32 buf[CXINF_MAX] = {};
struct usbatm_data *usbatm = instance->usbatm;
struct atm_dev *atm_dev = usbatm->atm_dev;
+ int keep_polling = 1;
int ret;
ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX);
if (ret < 0) {
- atm_warn(usbatm, "poll status: error %d\n", ret);
+ if (ret != -ESHUTDOWN)
+ atm_warn(usbatm, "poll status: error %d\n", ret);
+
+ mutex_lock(&instance->poll_state_serialize);
+ if (instance->poll_state != CXPOLL_SHUTDOWN) {
+ instance->poll_state = CXPOLL_STOPPED;
+
+ if (ret != -ESHUTDOWN)
+ atm_warn(usbatm, "polling disabled, set adsl_state"
+ " to 'start' or 'poll' to resume\n");
+ }
+ mutex_unlock(&instance->poll_state_serialize);
goto reschedule;
}
+ memcpy(instance->card_info, buf, sizeof(instance->card_info));
+
+ if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) {
+ instance->adsl_status = buf[CXINF_LINE_STARTABLE];
+
+ switch (instance->adsl_status) {
+ case 0:
+ atm_printk(KERN_INFO, usbatm, "ADSL state: running\n");
+ break;
+
+ case 1:
+ atm_printk(KERN_INFO, usbatm, "ADSL state: stopped\n");
+ break;
+
+ default:
+ atm_printk(KERN_INFO, usbatm, "Unknown adsl status %02x\n", instance->adsl_status);
+ break;
+ }
+ }
+
if (instance->line_status == buf[CXINF_LINE_STATUS])
goto reschedule;
@@ -449,7 +783,20 @@ static void cxacru_poll_status(struct work_struct *work)
break;
}
reschedule:
- schedule_delayed_work(&instance->poll_work, msecs_to_jiffies(POLL_INTERVAL));
+
+ mutex_lock(&instance->poll_state_serialize);
+ if (instance->poll_state == CXPOLL_STOPPING &&
+ instance->adsl_status == 1 && /* stopped */
+ instance->line_status == 0) /* down */
+ instance->poll_state = CXPOLL_STOPPED;
+
+ if (instance->poll_state == CXPOLL_STOPPED)
+ keep_polling = 0;
+ mutex_unlock(&instance->poll_state_serialize);
+
+ if (keep_polling)
+ schedule_delayed_work(&instance->poll_work,
+ round_jiffies_relative(POLL_INTERVAL*HZ));
}
static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw,
@@ -684,6 +1031,14 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
instance->usbatm = usbatm_instance;
instance->modem_type = (struct cxacru_modem_type *) id->driver_info;
+ memset(instance->card_info, 0, sizeof(instance->card_info));
+
+ mutex_init(&instance->poll_state_serialize);
+ instance->poll_state = CXPOLL_STOPPED;
+ instance->line_status = -1;
+ instance->adsl_status = -1;
+
+ mutex_init(&instance->adsl_state_serialize);
instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL);
if (!instance->rcv_buf) {
@@ -710,6 +1065,13 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
goto fail;
}
+ #define CXACRU_DEVICE_CREATE_FILE(_name) \
+ ret = device_create_file(&intf->dev, &dev_attr_##_name); \
+ if (unlikely(ret)) \
+ goto fail_sysfs;
+ CXACRU_ALL_FILES(CREATE);
+ #undef CXACRU_DEVICE_CREATE_FILE
+
usb_fill_int_urb(instance->rcv_urb,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
@@ -730,6 +1092,14 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
return 0;
+ fail_sysfs:
+ dbg("cxacru_bind: device_create_file failed (%d)\n", ret);
+
+ #define CXACRU_DEVICE_REMOVE_FILE(_name) \
+ device_remove_file(&intf->dev, &dev_attr_##_name);
+ CXACRU_ALL_FILES(REMOVE);
+ #undef CXACRU_DEVICE_REVOVE_FILE
+
fail:
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
@@ -744,6 +1114,7 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
struct usb_interface *intf)
{
struct cxacru_data *instance = usbatm_instance->driver_data;
+ int is_polling = 1;
dbg("cxacru_unbind entered");
@@ -752,8 +1123,20 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
return;
}
- while (!cancel_delayed_work(&instance->poll_work))
- flush_scheduled_work();
+ mutex_lock(&instance->poll_state_serialize);
+ BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN);
+
+ /* ensure that status polling continues unless
+ * it has already stopped */
+ if (instance->poll_state == CXPOLL_STOPPED)
+ is_polling = 0;
+
+ /* stop polling from being stopped or started */
+ instance->poll_state = CXPOLL_SHUTDOWN;
+ mutex_unlock(&instance->poll_state_serialize);
+
+ if (is_polling)
+ cancel_rearming_delayed_work(&instance->poll_work);
usb_kill_urb(instance->snd_urb);
usb_kill_urb(instance->rcv_urb);
@@ -762,6 +1145,12 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
free_page((unsigned long) instance->snd_buf);
free_page((unsigned long) instance->rcv_buf);
+
+ #define CXACRU_DEVICE_REMOVE_FILE(_name) \
+ device_remove_file(&intf->dev, &dev_attr_##_name);
+ CXACRU_ALL_FILES(REMOVE);
+ #undef CXACRU_DEVICE_REVOVE_FILE
+
kfree(instance);
usbatm_instance->driver_data = NULL;
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index ec63b0ee0743..b3f779f5933a 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -274,6 +274,9 @@ static void usbatm_complete(struct urb *urb)
(!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) ||
urb->status != -EILSEQ ))
{
+ if (urb->status == -ESHUTDOWN)
+ return;
+
if (printk_ratelimit())
atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n",
__func__, urb, urb->status);
@@ -343,7 +346,7 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char
UDSL_ASSERT(sarb->tail + ATM_CELL_PAYLOAD <= sarb->end);
}
- memcpy(sarb->tail, source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
+ memcpy(skb_tail_pointer(sarb), source + ATM_CELL_HEADER, ATM_CELL_PAYLOAD);
__skb_put(sarb, ATM_CELL_PAYLOAD);
if (pti & 1) {
@@ -370,7 +373,7 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char
goto out;
}
- if (crc32_be(~0, sarb->tail - pdu_length, pdu_length) != 0xc704dd7b) {
+ if (crc32_be(~0, skb_tail_pointer(sarb) - pdu_length, pdu_length) != 0xc704dd7b) {
atm_rldbg(instance, "%s: packet failed crc check (vcc: 0x%p)!\n",
__func__, vcc);
atomic_inc(&vcc->stats->rx_err);
@@ -396,7 +399,9 @@ static void usbatm_extract_one_cell(struct usbatm_data *instance, unsigned char
goto out; /* atm_charge increments rx_drop */
}
- memcpy(skb->data, sarb->tail - pdu_length, length);
+ skb_copy_to_linear_data(skb,
+ skb_tail_pointer(sarb) - pdu_length,
+ length);
__skb_put(skb, length);
vdbg("%s: sending skb 0x%p, skb->len %u, skb->truesize %u",
@@ -484,7 +489,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance,
ptr[4] = 0xec;
ptr += ATM_CELL_HEADER;
- memcpy(ptr, skb->data, data_len);
+ skb_copy_from_linear_data(skb, ptr, data_len);
ptr += data_len;
__skb_pull(skb, data_len);
@@ -966,6 +971,14 @@ static int usbatm_atm_init(struct usbatm_data *instance)
/* temp init ATM device, set to 128kbit */
atm_dev->link_rate = 128 * 1000 / 424;
+ ret = sysfs_create_link(&atm_dev->class_dev.kobj,
+ &instance->usb_intf->dev.kobj, "device");
+ if (ret) {
+ atm_err(instance, "%s: sysfs_create_link failed: %d\n",
+ __func__, ret);
+ goto fail_sysfs;
+ }
+
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
@@ -984,6 +997,8 @@ static int usbatm_atm_init(struct usbatm_data *instance)
return 0;
fail:
+ sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
+ fail_sysfs:
instance->atm_dev = NULL;
atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
@@ -1316,8 +1331,10 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
kfree(instance->cell_buf);
/* ATM finalize */
- if (instance->atm_dev)
+ if (instance->atm_dev) {
+ sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
atm_dev_deregister(instance->atm_dev);
+ }
usbatm_put_instance(instance); /* taken in usbatm_usb_probe */
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 31ae661e586a..14de3b1b6a20 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -212,7 +212,41 @@ static int acm_write_start(struct acm *acm)
}
return rc;
}
+/*
+ * attributes exported through sysfs
+ */
+static ssize_t show_caps
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ return sprintf(buf, "%d", acm->ctrl_caps);
+}
+static DEVICE_ATTR(bmCapabilities, S_IRUGO, show_caps, NULL);
+
+static ssize_t show_country_codes
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ memcpy(buf, acm->country_codes, acm->country_code_size);
+ return acm->country_code_size;
+}
+
+static DEVICE_ATTR(wCountryCodes, S_IRUGO, show_country_codes, NULL);
+
+static ssize_t show_country_rel_date
+(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_interface *intf = to_usb_interface(dev);
+ struct acm *acm = usb_get_intfdata(intf);
+
+ return sprintf(buf, "%d", acm->country_rel_date);
+}
+static DEVICE_ATTR(iCountryCodeRelDate, S_IRUGO, show_country_rel_date, NULL);
/*
* Interrupt handlers for various ACM device responses
*/
@@ -514,6 +548,7 @@ static void acm_tty_unregister(struct acm *acm)
usb_free_urb(acm->writeurb);
for (i = 0; i < nr; i++)
usb_free_urb(acm->ru[i].urb);
+ kfree(acm->country_codes);
kfree(acm);
}
@@ -761,6 +796,7 @@ static int acm_probe (struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_cdc_union_desc *union_header = NULL;
+ struct usb_cdc_country_functional_desc *cfd = NULL;
char *buffer = intf->altsetting->extra;
int buflen = intf->altsetting->extralen;
struct usb_interface *control_interface;
@@ -824,8 +860,9 @@ static int acm_probe (struct usb_interface *intf,
union_header = (struct usb_cdc_union_desc *)
buffer;
break;
- case USB_CDC_COUNTRY_TYPE: /* maybe somehow export */
- break; /* for now we ignore it */
+ case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/
+ cfd = (struct usb_cdc_country_functional_desc *)buffer;
+ break;
case USB_CDC_HEADER_TYPE: /* maybe check version */
break; /* for now we ignore it */
case USB_CDC_ACM_TYPE:
@@ -983,6 +1020,34 @@ skip_normal_probe:
goto alloc_fail7;
}
+ usb_set_intfdata (intf, acm);
+
+ i = device_create_file(&intf->dev, &dev_attr_bmCapabilities);
+ if (i < 0)
+ goto alloc_fail8;
+
+ if (cfd) { /* export the country data */
+ acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL);
+ if (!acm->country_codes)
+ goto skip_countries;
+ acm->country_code_size = cfd->bLength - 4;
+ memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4);
+ acm->country_rel_date = cfd->iCountryCodeRelDate;
+
+ i = device_create_file(&intf->dev, &dev_attr_wCountryCodes);
+ if (i < 0) {
+ kfree(acm->country_codes);
+ goto skip_countries;
+ }
+
+ i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+ if (i < 0) {
+ kfree(acm->country_codes);
+ goto skip_countries;
+ }
+ }
+
+skip_countries:
usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress),
acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval);
acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1006,9 +1071,10 @@ skip_normal_probe:
tty_register_device(acm_tty_driver, minor, &control_interface->dev);
acm_table[minor] = acm;
- usb_set_intfdata (intf, acm);
- return 0;
+ return 0;
+alloc_fail8:
+ usb_free_urb(acm->writeurb);
alloc_fail7:
for (i = 0; i < num_rx_buf; i++)
usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma);
@@ -1027,7 +1093,7 @@ alloc_fail:
static void acm_disconnect(struct usb_interface *intf)
{
- struct acm *acm = usb_get_intfdata (intf);
+ struct acm *acm = usb_get_intfdata(intf);
struct usb_device *usb_dev = interface_to_usbdev(intf);
int i;
@@ -1041,6 +1107,11 @@ static void acm_disconnect(struct usb_interface *intf)
mutex_unlock(&open_mutex);
return;
}
+ if (acm->country_codes){
+ device_remove_file(&intf->dev, &dev_attr_wCountryCodes);
+ device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate);
+ }
+ device_remove_file(&intf->dev, &dev_attr_bmCapabilities);
acm->dev = NULL;
usb_set_intfdata(acm->control, NULL);
usb_set_intfdata(acm->data, NULL);
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 1bcaea32cfc1..09f7765dbf8d 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -91,6 +91,9 @@ struct acm {
struct urb *ctrlurb, *writeurb; /* urbs */
u8 *ctrl_buffer; /* buffers of urbs */
dma_addr_t ctrl_dma; /* dma handles of buffers */
+ u8 *country_codes; /* country codes from device */
+ unsigned int country_code_size; /* size of this buffer */
+ unsigned int country_rel_date; /* release date of version */
struct acm_wb wb[ACM_NW];
struct acm_ru ru[ACM_NR];
struct acm_rb rb[ACM_NR];
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 2fc0f88a3d86..f493fb1eaa27 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -31,7 +31,30 @@ config USB_DEVICEFS
For the format of the various /proc/bus/usb/ files, please read
<file:Documentation/usb/proc_usb_info.txt>.
- Most users want to say Y here.
+ Usbfs files can't handle Access Control Lists (ACL), which are the
+ default way to grant access to USB devices for untrusted users of a
+ desktop system. The usbfs functionality is replaced by real
+ device-nodes managed by udev. These nodes live in /dev/bus/usb and
+ are used by libusb.
+
+config USB_DEVICE_CLASS
+ bool "USB device class-devices (DEPRECATED)"
+ depends on USB
+ default n
+ ---help---
+ Userspace access to USB devices is granted by device-nodes exported
+ directly from the usbdev in sysfs. Old versions of the driver
+ core and udev needed additional class devices to export device nodes.
+
+ These additional devices are difficult to handle in userspace, if
+ information about USB interfaces must be available. One device contains
+ the device node, the other device contains the interface data. Both
+ devices are at the same level in sysfs (siblings) and one can't access
+ the other. The device node created directly by the usbdev is the parent
+ device of the interface and therefore easily accessible from the interface
+ event.
+
+ This option provides backward compatibility if needed.
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation (EXPERIMENTAL)"
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index aefc7987120d..6753ca059ee4 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -246,7 +246,6 @@ static char *usb_dump_interface_descriptor(char *start, char *end,
if (start > end)
return start;
- down_read(&usb_bus_type.subsys.rwsem);
if (iface) {
driver_name = (iface->dev.driver
? iface->dev.driver->name
@@ -263,7 +262,6 @@ static char *usb_dump_interface_descriptor(char *start, char *end,
desc->bInterfaceSubClass,
desc->bInterfaceProtocol,
driver_name);
- up_read(&usb_bus_type.subsys.rwsem);
return start;
}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 36e7a843bf91..927a181120a9 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -57,7 +57,6 @@
#define USB_MAXBUS 64
#define USB_DEVICE_MAX USB_MAXBUS * 128
-static struct class *usb_device_class;
/* Mutual exclusion for removal, open, and release */
DEFINE_MUTEX(usbfs_mutex);
@@ -421,14 +420,11 @@ static int claimintf(struct dev_state *ps, unsigned int ifnum)
if (test_bit(ifnum, &ps->ifclaimed))
return 0;
- /* lock against other changes to driver bindings */
- down_write(&usb_bus_type.subsys.rwsem);
intf = usb_ifnum_to_if(dev, ifnum);
if (!intf)
err = -ENOENT;
else
err = usb_driver_claim_interface(&usbfs_driver, intf, ps);
- up_write(&usb_bus_type.subsys.rwsem);
if (err == 0)
set_bit(ifnum, &ps->ifclaimed);
return err;
@@ -444,8 +440,6 @@ static int releaseintf(struct dev_state *ps, unsigned int ifnum)
if (ifnum >= 8*sizeof(ps->ifclaimed))
return err;
dev = ps->dev;
- /* lock against other changes to driver bindings */
- down_write(&usb_bus_type.subsys.rwsem);
intf = usb_ifnum_to_if(dev, ifnum);
if (!intf)
err = -ENOENT;
@@ -453,7 +447,6 @@ static int releaseintf(struct dev_state *ps, unsigned int ifnum)
usb_driver_release_interface(&usbfs_driver, intf);
err = 0;
}
- up_write(&usb_bus_type.subsys.rwsem);
return err;
}
@@ -520,22 +513,25 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig
return ret;
}
-static struct usb_device *usbdev_lookup_minor(int minor)
+static int __match_minor(struct device *dev, void *data)
{
- struct device *device;
- struct usb_device *udev = NULL;
+ int minor = *((int *)data);
- down(&usb_device_class->sem);
- list_for_each_entry(device, &usb_device_class->devices, node) {
- if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
- udev = device->platform_data;
- break;
- }
- }
- up(&usb_device_class->sem);
+ if (dev->devt == MKDEV(USB_DEVICE_MAJOR, minor))
+ return 1;
+ return 0;
+}
- return udev;
-};
+static struct usb_device *usbdev_lookup_by_minor(int minor)
+{
+ struct device *dev;
+
+ dev = bus_find_device(&usb_bus_type, NULL, &minor, __match_minor);
+ if (!dev)
+ return NULL;
+ put_device(dev);
+ return container_of(dev, struct usb_device, dev);
+}
/*
* file operations
@@ -554,11 +550,14 @@ static int usbdev_open(struct inode *inode, struct file *file)
goto out;
ret = -ENOENT;
- /* check if we are called from a real node or usbfs */
+ /* usbdev device-node */
if (imajor(inode) == USB_DEVICE_MAJOR)
- dev = usbdev_lookup_minor(iminor(inode));
+ dev = usbdev_lookup_by_minor(iminor(inode));
+#ifdef CONFIG_USB_DEVICEFS
+ /* procfs file */
if (!dev)
dev = inode->i_private;
+#endif
if (!dev)
goto out;
ret = usb_autoresume_device(dev);
@@ -581,7 +580,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
ps->disccontext = NULL;
ps->ifclaimed = 0;
security_task_getsecid(current, &ps->secid);
- wmb();
+ smp_wmb();
list_add_tail(&ps->list, &dev->filelist);
file->private_data = ps;
out:
@@ -813,7 +812,6 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg)
if (copy_from_user(&gd, arg, sizeof(gd)))
return -EFAULT;
- down_read(&usb_bus_type.subsys.rwsem);
intf = usb_ifnum_to_if(ps->dev, gd.interface);
if (!intf || !intf->dev.driver)
ret = -ENODATA;
@@ -822,7 +820,6 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg)
sizeof(gd.driver));
ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0);
}
- up_read(&usb_bus_type.subsys.rwsem);
return ret;
}
@@ -1351,15 +1348,12 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
/* disconnect kernel driver from interface */
case USBDEVFS_DISCONNECT:
-
- down_write(&usb_bus_type.subsys.rwsem);
if (intf->dev.driver) {
driver = to_usb_driver(intf->dev.driver);
dev_dbg (&intf->dev, "disconnect by usbfs\n");
usb_driver_release_interface(driver, intf);
} else
retval = -ENODATA;
- up_write(&usb_bus_type.subsys.rwsem);
break;
/* let kernel drivers try to (re)bind to the interface */
@@ -1371,7 +1365,6 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
/* talk directly to the interface's driver */
default:
- down_read(&usb_bus_type.subsys.rwsem);
if (intf->dev.driver)
driver = to_usb_driver(intf->dev.driver);
if (driver == NULL || driver->ioctl == NULL) {
@@ -1381,7 +1374,6 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl)
if (retval == -ENOIOCTLCMD)
retval = -ENOTTY;
}
- up_read(&usb_bus_type.subsys.rwsem);
}
/* cleanup and return */
@@ -1583,7 +1575,7 @@ static unsigned int usbdev_poll(struct file *file, struct poll_table_struct *wai
return mask;
}
-const struct file_operations usbfs_device_file_operations = {
+const struct file_operations usbdev_file_operations = {
.llseek = usbdev_lseek,
.read = usbdev_read,
.poll = usbdev_poll,
@@ -1592,50 +1584,53 @@ const struct file_operations usbfs_device_file_operations = {
.release = usbdev_release,
};
-static int usbdev_add(struct usb_device *dev)
+#ifdef CONFIG_USB_DEVICE_CLASS
+static struct class *usb_classdev_class;
+
+static int usb_classdev_add(struct usb_device *dev)
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
- dev->usbfs_dev = device_create(usb_device_class, &dev->dev,
+ dev->usb_classdev = device_create(usb_classdev_class, &dev->dev,
MKDEV(USB_DEVICE_MAJOR, minor),
"usbdev%d.%d", dev->bus->busnum, dev->devnum);
- if (IS_ERR(dev->usbfs_dev))
- return PTR_ERR(dev->usbfs_dev);
+ if (IS_ERR(dev->usb_classdev))
+ return PTR_ERR(dev->usb_classdev);
- dev->usbfs_dev->platform_data = dev;
return 0;
}
-static void usbdev_remove(struct usb_device *dev)
+static void usb_classdev_remove(struct usb_device *dev)
{
- device_unregister(dev->usbfs_dev);
+ device_unregister(dev->usb_classdev);
}
-static int usbdev_notify(struct notifier_block *self, unsigned long action,
- void *dev)
+static int usb_classdev_notify(struct notifier_block *self,
+ unsigned long action, void *dev)
{
switch (action) {
case USB_DEVICE_ADD:
- if (usbdev_add(dev))
+ if (usb_classdev_add(dev))
return NOTIFY_BAD;
break;
case USB_DEVICE_REMOVE:
- usbdev_remove(dev);
+ usb_classdev_remove(dev);
break;
}
return NOTIFY_OK;
}
static struct notifier_block usbdev_nb = {
- .notifier_call = usbdev_notify,
+ .notifier_call = usb_classdev_notify,
};
+#endif
static struct cdev usb_device_cdev = {
.kobj = {.name = "usb_device", },
.owner = THIS_MODULE,
};
-int __init usbdev_init(void)
+int __init usb_devio_init(void)
{
int retval;
@@ -1645,38 +1640,38 @@ int __init usbdev_init(void)
err("unable to register minors for usb_device");
goto out;
}
- cdev_init(&usb_device_cdev, &usbfs_device_file_operations);
+ cdev_init(&usb_device_cdev, &usbdev_file_operations);
retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX);
if (retval) {
err("unable to get usb_device major %d", USB_DEVICE_MAJOR);
goto error_cdev;
}
- usb_device_class = class_create(THIS_MODULE, "usb_device");
- if (IS_ERR(usb_device_class)) {
+#ifdef CONFIG_USB_DEVICE_CLASS
+ usb_classdev_class = class_create(THIS_MODULE, "usb_device");
+ if (IS_ERR(usb_classdev_class)) {
err("unable to register usb_device class");
- retval = PTR_ERR(usb_device_class);
- goto error_class;
+ retval = PTR_ERR(usb_classdev_class);
+ cdev_del(&usb_device_cdev);
+ usb_classdev_class = NULL;
+ goto out;
}
usb_register_notify(&usbdev_nb);
-
+#endif
out:
return retval;
-error_class:
- usb_device_class = NULL;
- cdev_del(&usb_device_cdev);
-
error_cdev:
unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
goto out;
}
-void usbdev_cleanup(void)
+void usb_devio_cleanup(void)
{
+#ifdef CONFIG_USB_DEVICE_CLASS
usb_unregister_notify(&usbdev_nb);
- class_destroy(usb_device_class);
+ class_destroy(usb_classdev_class);
+#endif
cdev_del(&usb_device_cdev);
unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX);
}
-
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 9e3e943f313c..b9f7f90aef82 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -287,9 +287,9 @@ static int usb_unbind_interface(struct device *dev)
* way to bind to an interface is to return the private data from
* the driver's probe() method.
*
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver probe() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver probe() entries don't need
+ * extra locking, but other call contexts may need to explicitly claim that
+ * lock.
*/
int usb_driver_claim_interface(struct usb_driver *driver,
struct usb_interface *iface, void* priv)
@@ -330,9 +330,9 @@ EXPORT_SYMBOL(usb_driver_claim_interface);
* also causes the driver disconnect() method to be called.
*
* This call is synchronous, and may not be used in an interrupt context.
- * Callers must own the device lock and the driver model's usb_bus_type.subsys
- * writelock. So driver disconnect() entries don't need extra locking,
- * but other call contexts may need to explicitly claim those locks.
+ * Callers must own the device lock, so driver disconnect() entries don't
+ * need extra locking, but other call contexts may need to explicitly claim
+ * that lock.
*/
void usb_driver_release_interface(struct usb_driver *driver,
struct usb_interface *iface)
@@ -574,23 +574,10 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
}
#ifdef CONFIG_HOTPLUG
-
-/*
- * This sends an uevent to userspace, typically helping to load driver
- * or other modules, configure the device, and more. Drivers can provide
- * a MODULE_DEVICE_TABLE to help with module loading subtasks.
- *
- * We're called either from khubd (the typical case) or from root hub
- * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle
- * delays in event delivery. Use sysfs (and DEVPATH) to make sure the
- * device (and this configuration!) are still present.
- */
static int usb_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
{
- struct usb_interface *intf;
struct usb_device *usb_dev;
- struct usb_host_interface *alt;
int i = 0;
int length = 0;
@@ -600,13 +587,11 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp,
/* driver is often null here; dev_dbg() would oops */
pr_debug ("usb %s: uevent\n", dev->bus_id);
- if (is_usb_device(dev)) {
+ if (is_usb_device(dev))
usb_dev = to_usb_device(dev);
- alt = NULL;
- } else {
- intf = to_usb_interface(dev);
+ else {
+ struct usb_interface *intf = to_usb_interface(dev);
usb_dev = interface_to_usbdev(intf);
- alt = intf->cur_altsetting;
}
if (usb_dev->devnum < 0) {
@@ -621,9 +606,7 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp,
#ifdef CONFIG_USB_DEVICEFS
/* If this is available, userspace programs can directly read
* all the device descriptors we don't tell them about. Or
- * even act as usermode drivers.
- *
- * FIXME reduce hardwired intelligence here
+ * act as usermode drivers.
*/
if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
@@ -650,44 +633,29 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp,
usb_dev->descriptor.bDeviceProtocol))
return -ENOMEM;
- if (!is_usb_device(dev)) {
-
- if (add_uevent_var(envp, num_envp, &i,
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
- "INTERFACE=%d/%d/%d",
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
+ "BUSNUM=%03d",
+ usb_dev->bus->busnum))
+ return -ENOMEM;
- if (add_uevent_var(envp, num_envp, &i,
+ if (add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
- "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
- le16_to_cpu(usb_dev->descriptor.idVendor),
- le16_to_cpu(usb_dev->descriptor.idProduct),
- le16_to_cpu(usb_dev->descriptor.bcdDevice),
- usb_dev->descriptor.bDeviceClass,
- usb_dev->descriptor.bDeviceSubClass,
- usb_dev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol))
- return -ENOMEM;
- }
+ "DEVNUM=%03d",
+ usb_dev->devnum))
+ return -ENOMEM;
envp[i] = NULL;
-
return 0;
}
#else
static int usb_uevent(struct device *dev, char **envp,
- int num_envp, char *buffer, int buffer_size)
+ int num_envp, char *buffer, int buffer_size)
{
return -ENODEV;
}
-
#endif /* CONFIG_HOTPLUG */
/**
@@ -872,8 +840,10 @@ static int usb_resume_device(struct usb_device *udev)
done:
// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
- if (status == 0)
+ if (status == 0) {
+ udev->autoresume_disabled = 0;
udev->dev.power.power_state.event = PM_EVENT_ON;
+ }
return status;
}
@@ -962,6 +932,7 @@ static int autosuspend_check(struct usb_device *udev)
{
int i;
struct usb_interface *intf;
+ unsigned long suspend_time;
/* For autosuspend, fail fast if anything is in use or autosuspend
* is disabled. Also fail if any interfaces require remote wakeup
@@ -970,9 +941,10 @@ static int autosuspend_check(struct usb_device *udev)
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->pm_usage_cnt > 0)
return -EBUSY;
- if (!udev->autosuspend_delay)
+ if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled)
return -EPERM;
+ suspend_time = udev->last_busy + udev->autosuspend_delay;
if (udev->actconfig) {
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
intf = udev->actconfig->interface[i];
@@ -988,6 +960,24 @@ static int autosuspend_check(struct usb_device *udev)
}
}
}
+
+ /* If everything is okay but the device hasn't been idle for long
+ * enough, queue a delayed autosuspend request.
+ */
+ if (time_after(suspend_time, jiffies)) {
+ if (!timer_pending(&udev->autosuspend.timer)) {
+
+ /* The value of jiffies may change between the
+ * time_after() comparison above and the subtraction
+ * below. That's okay; the system behaves sanely
+ * when a timer is registered for the present moment
+ * or for the past.
+ */
+ queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+ suspend_time - jiffies);
+ }
+ return -EAGAIN;
+ }
return 0;
}
@@ -1033,26 +1023,25 @@ static int autosuspend_check(struct usb_device *udev)
*
* This routine can run only in process context.
*/
-int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
+static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
{
int status = 0;
int i = 0;
struct usb_interface *intf;
struct usb_device *parent = udev->parent;
- cancel_delayed_work(&udev->autosuspend);
- if (udev->state == USB_STATE_NOTATTACHED)
- return 0;
- if (udev->state == USB_STATE_SUSPENDED)
- return 0;
+ if (udev->state == USB_STATE_NOTATTACHED ||
+ udev->state == USB_STATE_SUSPENDED)
+ goto done;
udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
if (udev->auto_pm) {
status = autosuspend_check(udev);
if (status < 0)
- return status;
+ goto done;
}
+ cancel_delayed_work(&udev->autosuspend);
/* Suspend all the interfaces and then udev itself */
if (udev->actconfig) {
@@ -1077,6 +1066,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
} else if (parent)
usb_autosuspend_device(parent);
+ done:
// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
}
@@ -1109,7 +1099,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
*
* This routine can run only in process context.
*/
-int usb_resume_both(struct usb_device *udev)
+static int usb_resume_both(struct usb_device *udev)
{
int status = 0;
int i;
@@ -1117,11 +1107,17 @@ int usb_resume_both(struct usb_device *udev)
struct usb_device *parent = udev->parent;
cancel_delayed_work(&udev->autosuspend);
- if (udev->state == USB_STATE_NOTATTACHED)
- return -ENODEV;
+ if (udev->state == USB_STATE_NOTATTACHED) {
+ status = -ENODEV;
+ goto done;
+ }
/* Propagate the resume up the tree, if necessary */
if (udev->state == USB_STATE_SUSPENDED) {
+ if (udev->auto_pm && udev->autoresume_disabled) {
+ status = -EPERM;
+ goto done;
+ }
if (parent) {
status = usb_autoresume_device(parent);
if (status == 0) {
@@ -1167,6 +1163,7 @@ int usb_resume_both(struct usb_device *udev)
}
}
+ done:
// dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
return status;
}
@@ -1181,20 +1178,34 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
int status = 0;
usb_pm_lock(udev);
+ udev->auto_pm = 1;
udev->pm_usage_cnt += inc_usage_cnt;
WARN_ON(udev->pm_usage_cnt < 0);
if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
+ if (udev->state == USB_STATE_SUSPENDED)
+ status = usb_resume_both(udev);
if (status != 0)
udev->pm_usage_cnt -= inc_usage_cnt;
- } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- udev->autosuspend_delay);
+ else if (inc_usage_cnt)
+ udev->last_busy = jiffies;
+ } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) {
+ if (inc_usage_cnt)
+ udev->last_busy = jiffies;
+ status = usb_suspend_both(udev, PMSG_SUSPEND);
+ }
usb_pm_unlock(udev);
return status;
}
+/* usb_autosuspend_work - callback routine to autosuspend a USB device */
+void usb_autosuspend_work(struct work_struct *work)
+{
+ struct usb_device *udev =
+ container_of(work, struct usb_device, autosuspend.work);
+
+ usb_autopm_do_device(udev, 0);
+}
+
/**
* usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
* @udev: the usb_device to autosuspend
@@ -1286,15 +1297,20 @@ static int usb_autopm_do_interface(struct usb_interface *intf,
if (intf->condition == USB_INTERFACE_UNBOUND)
status = -ENODEV;
else {
+ udev->auto_pm = 1;
intf->pm_usage_cnt += inc_usage_cnt;
if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
- udev->auto_pm = 1;
- status = usb_resume_both(udev);
+ if (udev->state == USB_STATE_SUSPENDED)
+ status = usb_resume_both(udev);
if (status != 0)
intf->pm_usage_cnt -= inc_usage_cnt;
- } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
- queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
- udev->autosuspend_delay);
+ else if (inc_usage_cnt)
+ udev->last_busy = jiffies;
+ } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) {
+ if (inc_usage_cnt)
+ udev->last_busy = jiffies;
+ status = usb_suspend_both(udev, PMSG_SUSPEND);
+ }
}
usb_pm_unlock(udev);
return status;
@@ -1353,11 +1369,14 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
* or @intf is unbound. A typical example would be a character-device
* driver when its device file is opened.
*
- * The routine increments @intf's usage counter. So long as the counter
- * is greater than 0, autosuspend will not be allowed for @intf or its
- * usb_device. When the driver is finished using @intf it should call
- * usb_autopm_put_interface() to decrement the usage counter and queue
- * a delayed autosuspend request (if the counter is <= 0).
+ *
+ * The routine increments @intf's usage counter. (However if the
+ * autoresume fails then the counter is re-decremented.) So long as the
+ * counter is greater than 0, autosuspend will not be allowed for @intf
+ * or its usb_device. When the driver is finished using @intf it should
+ * call usb_autopm_put_interface() to decrement the usage counter and
+ * queue a delayed autosuspend request (if the counter is <= 0).
+ *
*
* Note that @intf->pm_usage_cnt is owned by the interface driver. The
* core will not change its value other than the increment and decrement
@@ -1405,50 +1424,96 @@ int usb_autopm_set_interface(struct usb_interface *intf)
}
EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
+#else
+
+void usb_autosuspend_work(struct work_struct *work)
+{}
+
#endif /* CONFIG_USB_SUSPEND */
-static int usb_suspend(struct device *dev, pm_message_t message)
+/**
+ * usb_external_suspend_device - external suspend of a USB device and its interfaces
+ * @udev: the usb_device to suspend
+ * @msg: Power Management message describing this state transition
+ *
+ * This routine handles external suspend requests: ones not generated
+ * internally by a USB driver (autosuspend) but rather coming from the user
+ * (via sysfs) or the PM core (system sleep). The suspend will be carried
+ * out regardless of @udev's usage counter or those of its interfaces,
+ * and regardless of whether or not remote wakeup is enabled. Of course,
+ * interface drivers still have the option of failing the suspend (if
+ * there are unsuspended children, for example).
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_suspend_both(udev, message);
- usb_pm_unlock(udev);
- } else
- status = 0;
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_suspend_both(udev, msg);
+ usb_pm_unlock(udev);
return status;
}
-static int usb_resume(struct device *dev)
+/**
+ * usb_external_resume_device - external resume of a USB device and its interfaces
+ * @udev: the usb_device to resume
+ *
+ * This routine handles external resume requests: ones not generated
+ * internally by a USB driver (autoresume) but rather coming from the user
+ * (via sysfs), the PM core (system resume), or the device itself (remote
+ * wakeup). @udev's usage counter is unaffected.
+ *
+ * The caller must hold @udev's device lock.
+ */
+int usb_external_resume_device(struct usb_device *udev)
{
int status;
- if (is_usb_device(dev)) {
- struct usb_device *udev = to_usb_device(dev);
-
- usb_pm_lock(udev);
- udev->auto_pm = 0;
- status = usb_resume_both(udev);
- usb_pm_unlock(udev);
+ usb_pm_lock(udev);
+ udev->auto_pm = 0;
+ status = usb_resume_both(udev);
+ usb_pm_unlock(udev);
- /* Rebind drivers that had no suspend method? */
- } else
- status = 0;
+ /* Now that the device is awake, we can start trying to autosuspend
+ * it again. */
+ if (status == 0)
+ usb_try_autosuspend_device(udev);
return status;
}
+static int usb_suspend(struct device *dev, pm_message_t message)
+{
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ return usb_external_suspend_device(to_usb_device(dev), message);
+}
+
+static int usb_resume(struct device *dev)
+{
+ struct usb_device *udev;
+
+ if (!is_usb_device(dev)) /* Ignore PM for interfaces */
+ return 0;
+ udev = to_usb_device(dev);
+ if (udev->autoresume_disabled)
+ return -EPERM;
+ return usb_external_resume_device(udev);
+}
+
+#else
+
+#define usb_suspend NULL
+#define usb_resume NULL
+
#endif /* CONFIG_PM */
struct bus_type usb_bus_type = {
.name = "usb",
.match = usb_device_match,
.uevent = usb_uevent,
-#ifdef CONFIG_PM
.suspend = usb_suspend,
.resume = usb_resume,
-#endif
};
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index b26c19e8d19f..40cf882293e6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -37,6 +37,7 @@
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <linux/platform_device.h>
+#include <linux/workqueue.h>
#include <linux/usb.h>
@@ -544,6 +545,8 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
unsigned long flags;
char buffer[4]; /* Any root hubs with > 31 ports? */
+ if (unlikely(!hcd->rh_registered))
+ return;
if (!hcd->uses_new_polling && !hcd->status_urb)
return;
@@ -1296,14 +1299,26 @@ int hcd_bus_resume (struct usb_bus *bus)
return status;
}
+/* Workqueue routine for root-hub remote wakeup */
+static void hcd_resume_work(struct work_struct *work)
+{
+ struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
+ struct usb_device *udev = hcd->self.root_hub;
+
+ usb_lock_device(udev);
+ usb_mark_last_busy(udev);
+ usb_external_resume_device(udev);
+ usb_unlock_device(udev);
+}
+
/**
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
* @hcd: host controller for this root hub
*
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
- * wakeup request is received. It queues a request for khubd to
- * resume the root hub (that is, manage its downstream ports again).
+ * wakeup request is received. The routine submits a workqueue request
+ * to resume the root hub (that is, manage its downstream ports again).
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
@@ -1311,7 +1326,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
spin_lock_irqsave (&hcd_root_hub_lock, flags);
if (hcd->rh_registered)
- usb_resume_root_hub (hcd->self.root_hub);
+ queue_work(ksuspend_usb_wq, &hcd->wakeup_work);
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
@@ -1500,6 +1515,9 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver,
init_timer(&hcd->rh_timer);
hcd->rh_timer.function = rh_timer_func;
hcd->rh_timer.data = (unsigned long) hcd;
+#ifdef CONFIG_PM
+ INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
+#endif
hcd->driver = driver;
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
@@ -1666,16 +1684,20 @@ void usb_remove_hcd(struct usb_hcd *hcd)
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
+#ifdef CONFIG_PM
+ flush_workqueue(ksuspend_usb_wq);
+#endif
+
mutex_lock(&usb_bus_list_lock);
usb_disconnect(&hcd->self.root_hub);
mutex_unlock(&usb_bus_list_lock);
- hcd->poll_rh = 0;
- del_timer_sync(&hcd->rh_timer);
-
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
+ hcd->poll_rh = 0;
+ del_timer_sync(&hcd->rh_timer);
+
if (hcd->irq >= 0)
free_irq(hcd->irq, hcd);
usb_deregister_bus(&hcd->self);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 2a269ca20517..ef50fa494e47 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -68,6 +68,9 @@ struct usb_hcd {
struct timer_list rh_timer; /* drives root-hub polling */
struct urb *status_urb; /* the current status urb */
+#ifdef CONFIG_PM
+ struct work_struct wakeup_work; /* for remote wakeup */
+#endif
/*
* hardware info/state
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index b89a98e61323..bde29ab2b504 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -119,8 +119,7 @@ MODULE_PARM_DESC(use_both_schemes,
"first one fails");
-#ifdef DEBUG
-static inline char *portspeed (int portstatus)
+static inline char *portspeed(int portstatus)
{
if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
return "480 Mb/s";
@@ -129,7 +128,6 @@ static inline char *portspeed (int portstatus)
else
return "12 Mb/s";
}
-#endif
/* Note that hdev or one of its children must be locked! */
static inline struct usb_hub *hdev_to_hub(struct usb_device *hdev)
@@ -1369,11 +1367,15 @@ int usb_new_device(struct usb_device *udev)
}
#endif
+ /* export the usbdev device-node for libusb */
+ udev->dev.devt = MKDEV(USB_DEVICE_MAJOR,
+ (((udev->bus->busnum-1) * 128) + (udev->devnum-1)));
+
/* Register the device. The device driver is responsible
- * for adding the device files to usbfs and sysfs and for
- * configuring the device.
+ * for adding the device files to sysfs and for configuring
+ * the device.
*/
- err = device_add (&udev->dev);
+ err = device_add(&udev->dev);
if (err) {
dev_err(&udev->dev, "can't device_add, error %d\n", err);
goto fail;
@@ -1857,12 +1859,8 @@ static int remote_wakeup(struct usb_device *udev)
usb_lock_device(udev);
if (udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
- status = usb_autoresume_device(udev);
-
- /* Give the interface drivers a chance to do something,
- * then autosuspend the device again. */
- if (status == 0)
- usb_autosuspend_device(udev);
+ usb_mark_last_busy(udev);
+ status = usb_external_resume_device(udev);
}
usb_unlock_device(udev);
return status;
@@ -1986,13 +1984,6 @@ static inline int remote_wakeup(struct usb_device *udev)
#define hub_resume NULL
#endif
-void usb_resume_root_hub(struct usb_device *hdev)
-{
- struct usb_hub *hub = hdev_to_hub(hdev);
-
- kick_khubd(hub);
-}
-
/* USB 2.0 spec, 7.1.7.3 / fig 7-29:
*
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 11dad22da41c..cddfc62c4611 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -662,7 +662,7 @@ static void usbfs_add_device(struct usb_device *dev)
sprintf (name, "%03d", dev->devnum);
dev->usbfs_dentry = fs_create_file (name, devmode | S_IFREG,
dev->bus->usbfs_dentry, dev,
- &usbfs_device_file_operations,
+ &usbdev_file_operations,
devuid, devgid);
if (dev->usbfs_dentry == NULL) {
err ("error creating usbfs device entry");
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 217a3d6d0a06..b7434787db5f 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -412,10 +412,24 @@ int usb_sg_init (
io->urbs [i]->status = -EINPROGRESS;
io->urbs [i]->actual_length = 0;
+ /*
+ * Some systems need to revert to PIO when DMA is temporarily
+ * unavailable. For their sakes, both transfer_buffer and
+ * transfer_dma are set when possible. However this can only
+ * work on systems without HIGHMEM, since DMA buffers located
+ * in high memory are not directly addressable by the CPU for
+ * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL
+ * to prevent stale pointers and to help spot bugs.
+ */
if (dma) {
- /* hc may use _only_ transfer_dma */
io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
len = sg_dma_len (sg + i);
+#ifdef CONFIG_HIGHMEM
+ io->urbs[i]->transfer_buffer = NULL;
+#else
+ io->urbs[i]->transfer_buffer =
+ page_address(sg[i].page) + sg[i].offset;
+#endif
} else {
/* hc may use _only_ transfer_buffer */
io->urbs [i]->transfer_buffer =
@@ -1305,7 +1319,7 @@ int usb_reset_configuration(struct usb_device *dev)
return 0;
}
-static void release_interface(struct device *dev)
+void usb_release_interface(struct device *dev)
{
struct usb_interface *intf = to_usb_interface(dev);
struct usb_interface_cache *intfc =
@@ -1315,6 +1329,67 @@ static void release_interface(struct device *dev)
kfree(intf);
}
+#ifdef CONFIG_HOTPLUG
+static int usb_if_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct usb_device *usb_dev;
+ struct usb_interface *intf;
+ struct usb_host_interface *alt;
+ int i = 0;
+ int length = 0;
+
+ if (!dev)
+ return -ENODEV;
+
+ /* driver is often null here; dev_dbg() would oops */
+ pr_debug ("usb %s: uevent\n", dev->bus_id);
+
+ intf = to_usb_interface(dev);
+ usb_dev = interface_to_usbdev(intf);
+ alt = intf->cur_altsetting;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "INTERFACE=%d/%d/%d",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+
+ if (add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X",
+ le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct),
+ le16_to_cpu(usb_dev->descriptor.bcdDevice),
+ usb_dev->descriptor.bDeviceClass,
+ usb_dev->descriptor.bDeviceSubClass,
+ usb_dev->descriptor.bDeviceProtocol,
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol))
+ return -ENOMEM;
+
+ envp[i] = NULL;
+ return 0;
+}
+
+#else
+
+static int usb_if_uevent(struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ return -ENODEV;
+}
+#endif /* CONFIG_HOTPLUG */
+
+struct device_type usb_if_device_type = {
+ .name = "usb_interface",
+ .release = usb_release_interface,
+ .uevent = usb_if_uevent,
+};
+
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
@@ -1349,7 +1424,7 @@ static void release_interface(struct device *dev)
*
* This call is synchronous. The calling context must be able to sleep,
* must own the device lock, and must not hold the driver model's USB
- * bus rwsem; usb device driver probe() methods cannot use this routine.
+ * bus mutex; usb device driver probe() methods cannot use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying call that failed. On successful completion, each interface
@@ -1478,8 +1553,8 @@ free_interfaces:
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
+ intf->dev.type = &usb_if_device_type;
intf->dev.dma_mask = dev->dev.dma_mask;
- intf->dev.release = release_interface;
device_initialize (&intf->dev);
mark_quiesced(intf);
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index f08ec85a6d64..739f520908aa 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -42,7 +42,7 @@ static void usb_autosuspend_quirk(struct usb_device *udev)
{
#ifdef CONFIG_USB_SUSPEND
/* disable autosuspend, but allow the user to re-enable it via sysfs */
- udev->autosuspend_delay = 0;
+ udev->autosuspend_disabled = 1;
#endif
}
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 311d5df80386..e7c982377488 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -11,6 +11,7 @@
#include <linux/kernel.h>
+#include <linux/string.h>
#include <linux/usb.h>
#include "usb.h"
@@ -117,6 +118,16 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf)
static DEVICE_ATTR(speed, S_IRUGO, show_speed, NULL);
static ssize_t
+show_busnum(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev;
+
+ udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", udev->bus->busnum);
+}
+static DEVICE_ATTR(busnum, S_IRUGO, show_busnum, NULL);
+
+static ssize_t
show_devnum(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
@@ -165,7 +176,7 @@ show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev = to_usb_device(dev);
- return sprintf(buf, "%u\n", udev->autosuspend_delay / HZ);
+ return sprintf(buf, "%d\n", udev->autosuspend_delay / HZ);
}
static ssize_t
@@ -173,39 +184,115 @@ set_autosuspend(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct usb_device *udev = to_usb_device(dev);
- unsigned value, old;
+ int value;
- if (sscanf(buf, "%u", &value) != 1 || value >= INT_MAX/HZ)
+ if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ ||
+ value <= - INT_MAX/HZ)
return -EINVAL;
value *= HZ;
- old = udev->autosuspend_delay;
udev->autosuspend_delay = value;
- if (value > 0 && old == 0)
+ if (value >= 0)
usb_try_autosuspend_device(udev);
-
+ else {
+ if (usb_autoresume_device(udev) == 0)
+ usb_autosuspend_device(udev);
+ }
return count;
}
static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR,
show_autosuspend, set_autosuspend);
+static const char on_string[] = "on";
+static const char auto_string[] = "auto";
+static const char suspend_string[] = "suspend";
+
+static ssize_t
+show_level(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ const char *p = auto_string;
+
+ if (udev->state == USB_STATE_SUSPENDED) {
+ if (udev->autoresume_disabled)
+ p = suspend_string;
+ } else {
+ if (udev->autosuspend_disabled)
+ p = on_string;
+ }
+ return sprintf(buf, "%s\n", p);
+}
+
+static ssize_t
+set_level(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct usb_device *udev = to_usb_device(dev);
+ int len = count;
+ char *cp;
+ int rc = 0;
+
+ cp = memchr(buf, '\n', count);
+ if (cp)
+ len = cp - buf;
+
+ usb_lock_device(udev);
+
+ /* Setting the flags without calling usb_pm_lock is a subject to
+ * races, but who cares...
+ */
+ if (len == sizeof on_string - 1 &&
+ strncmp(buf, on_string, len) == 0) {
+ udev->autosuspend_disabled = 1;
+ udev->autoresume_disabled = 0;
+ rc = usb_external_resume_device(udev);
+
+ } else if (len == sizeof auto_string - 1 &&
+ strncmp(buf, auto_string, len) == 0) {
+ udev->autosuspend_disabled = 0;
+ udev->autoresume_disabled = 0;
+ rc = usb_external_resume_device(udev);
+
+ } else if (len == sizeof suspend_string - 1 &&
+ strncmp(buf, suspend_string, len) == 0) {
+ udev->autosuspend_disabled = 0;
+ udev->autoresume_disabled = 1;
+ rc = usb_external_suspend_device(udev, PMSG_SUSPEND);
+
+ } else
+ rc = -EINVAL;
+
+ usb_unlock_device(udev);
+ return (rc < 0 ? rc : count);
+}
+
+static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level);
+
static char power_group[] = "power";
static int add_power_attributes(struct device *dev)
{
int rc = 0;
- if (is_usb_device(dev))
+ if (is_usb_device(dev)) {
rc = sysfs_add_file_to_group(&dev->kobj,
&dev_attr_autosuspend.attr,
power_group);
+ if (rc == 0)
+ rc = sysfs_add_file_to_group(&dev->kobj,
+ &dev_attr_level.attr,
+ power_group);
+ }
return rc;
}
static void remove_power_attributes(struct device *dev)
{
sysfs_remove_file_from_group(&dev->kobj,
+ &dev_attr_level.attr,
+ power_group);
+ sysfs_remove_file_from_group(&dev->kobj,
&dev_attr_autosuspend.attr,
power_group);
}
@@ -270,6 +357,7 @@ static struct attribute *dev_attrs[] = {
&dev_attr_bNumConfigurations.attr,
&dev_attr_bMaxPacketSize0.attr,
&dev_attr_speed.attr,
+ &dev_attr_busnum.attr,
&dev_attr_devnum.attr,
&dev_attr_version.attr,
&dev_attr_maxchild.attr,
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 54b42ce311c1..dfd1b5c87ca3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -49,12 +49,13 @@ const char *usbcore_name = "usbcore";
static int nousb; /* Disable USB when built into kernel image */
-struct workqueue_struct *ksuspend_usb_wq; /* For autosuspend */
+/* Workqueue for autosuspend and for remote wakeup of root hubs */
+struct workqueue_struct *ksuspend_usb_wq;
#ifdef CONFIG_USB_SUSPEND
static int usb_autosuspend_delay = 2; /* Default delay value,
* in seconds */
-module_param_named(autosuspend, usb_autosuspend_delay, uint, 0644);
+module_param_named(autosuspend, usb_autosuspend_delay, int, 0644);
MODULE_PARM_DESC(autosuspend, "default autosuspend delay");
#else
@@ -196,6 +197,11 @@ static void usb_release_dev(struct device *dev)
kfree(udev);
}
+struct device_type usb_device_type = {
+ .name = "usb_device",
+ .release = usb_release_dev,
+};
+
#ifdef CONFIG_PM
static int ksuspend_usb_init(void)
@@ -211,27 +217,6 @@ static void ksuspend_usb_cleanup(void)
destroy_workqueue(ksuspend_usb_wq);
}
-#ifdef CONFIG_USB_SUSPEND
-
-/* usb_autosuspend_work - callback routine to autosuspend a USB device */
-static void usb_autosuspend_work(struct work_struct *work)
-{
- struct usb_device *udev =
- container_of(work, struct usb_device, autosuspend.work);
-
- usb_pm_lock(udev);
- udev->auto_pm = 1;
- usb_suspend_both(udev, PMSG_SUSPEND);
- usb_pm_unlock(udev);
-}
-
-#else
-
-static void usb_autosuspend_work(struct work_struct *work)
-{}
-
-#endif /* CONFIG_USB_SUSPEND */
-
#else
#define ksuspend_usb_init() 0
@@ -267,13 +252,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1)
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
+ dev->dev.type = &usb_device_type;
dev->dev.dma_mask = bus->controller->dma_mask;
- dev->dev.release = usb_release_dev;
dev->state = USB_STATE_ATTACHED;
- /* This magic assignment distinguishes devices from interfaces */
- dev->dev.platform_data = &usb_generic_driver;
-
INIT_LIST_HEAD(&dev->ep0.urb_list);
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
@@ -902,9 +884,9 @@ static int __init usb_init(void)
retval = usb_register(&usbfs_driver);
if (retval)
goto driver_register_failed;
- retval = usbdev_init();
+ retval = usb_devio_init();
if (retval)
- goto usbdevice_init_failed;
+ goto usb_devio_init_failed;
retval = usbfs_init();
if (retval)
goto fs_init_failed;
@@ -919,8 +901,8 @@ static int __init usb_init(void)
hub_init_failed:
usbfs_cleanup();
fs_init_failed:
- usbdev_cleanup();
-usbdevice_init_failed:
+ usb_devio_cleanup();
+usb_devio_init_failed:
usb_deregister(&usbfs_driver);
driver_register_failed:
usb_major_cleanup();
@@ -947,7 +929,7 @@ static void __exit usb_exit(void)
usb_major_cleanup();
usbfs_cleanup();
usb_deregister(&usbfs_driver);
- usbdev_cleanup();
+ usb_devio_cleanup();
usb_hub_cleanup();
usb_host_cleanup();
bus_unregister(&usb_bus_type);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 08b5a04e3755..bf2eb0dae2ec 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -21,7 +21,6 @@ extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern void usb_kick_khubd(struct usb_device *dev);
-extern void usb_resume_root_hub(struct usb_device *dev);
extern int usb_match_device(struct usb_device *dev,
const struct usb_device_id *id);
@@ -34,10 +33,12 @@ extern void usb_host_cleanup(void);
#ifdef CONFIG_PM
-extern int usb_suspend_both(struct usb_device *udev, pm_message_t msg);
-extern int usb_resume_both(struct usb_device *udev);
+extern void usb_autosuspend_work(struct work_struct *work);
extern int usb_port_suspend(struct usb_device *dev);
extern int usb_port_resume(struct usb_device *dev);
+extern int usb_external_suspend_device(struct usb_device *udev,
+ pm_message_t msg);
+extern int usb_external_resume_device(struct usb_device *udev);
static inline void usb_pm_lock(struct usb_device *udev)
{
@@ -51,11 +52,6 @@ static inline void usb_pm_unlock(struct usb_device *udev)
#else
-#define usb_suspend_both(udev, msg) 0
-static inline int usb_resume_both(struct usb_device *udev)
-{
- return 0;
-}
#define usb_port_suspend(dev) 0
#define usb_port_resume(dev) 0
static inline void usb_pm_lock(struct usb_device *udev) {}
@@ -82,15 +78,13 @@ static inline int usb_autoresume_device(struct usb_device *udev)
extern struct workqueue_struct *ksuspend_usb_wq;
extern struct bus_type usb_bus_type;
+extern struct device_type usb_device_type;
+extern struct device_type usb_if_device_type;
extern struct usb_device_driver usb_generic_driver;
-/* Here's how we tell apart devices and interfaces. Luckily there's
- * no such thing as a platform USB device, so we can steal the use
- * of the platform_data field. */
-
static inline int is_usb_device(const struct device *dev)
{
- return dev->platform_data == &usb_generic_driver;
+ return dev->type == &usb_device_type;
}
/* Do the same for device drivers and interface drivers. */
@@ -126,11 +120,11 @@ extern const char *usbcore_name;
extern struct mutex usbfs_mutex;
extern struct usb_driver usbfs_driver;
extern const struct file_operations usbfs_devices_fops;
-extern const struct file_operations usbfs_device_file_operations;
+extern const struct file_operations usbdev_file_operations;
extern void usbfs_conn_disc_event(void);
-extern int usbdev_init(void);
-extern void usbdev_cleanup(void);
+extern int usb_devio_init(void);
+extern void usb_devio_cleanup(void);
struct dev_state {
struct list_head list; /* state list */
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 4097a86c4b5e..8065f2b53701 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -68,6 +68,27 @@ choice
Many controller drivers are platform-specific; these
often need board-specific hooks.
+config USB_GADGET_FSL_USB2
+ boolean "Freescale Highspeed USB DR Peripheral Controller"
+ depends on MPC834x || PPC_MPC831x
+ select USB_GADGET_DUALSPEED
+ help
+ Some of Freescale PowerPC processors have a High Speed
+ Dual-Role(DR) USB controller, which supports device mode.
+
+ The number of programmable endpoints is different through
+ SOC revisions.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "fsl_usb2_udc" and force
+ all gadget drivers to also be dynamically linked.
+
+config USB_FSL_USB2
+ tristate
+ depends on USB_GADGET_FSL_USB2
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_NET2280
boolean "NetChip 228x"
depends on PCI
@@ -370,6 +391,7 @@ config USB_GADGETFS
config USB_FILE_STORAGE
tristate "File-backed Storage Gadget"
+ depends on BLOCK
help
The File-backed Storage Gadget acts as a USB Mass Storage
disk drive. As its storage repository it can use a regular
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index e71e086a1cfa..5db19396631c 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU) += goku_udc.o
obj-$(CONFIG_USB_OMAP) += omap_udc.o
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
obj-$(CONFIG_USB_AT91) += at91_udc.o
+obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
#
# USB gadget drivers
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 04e6b8508fb6..1dd8b57f4420 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -282,6 +282,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address");
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_FSL_USB2
+#define DEV_CONFIG_CDC
+#endif
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
@@ -1735,7 +1738,8 @@ enomem:
defer_kevent (dev, WORK_RX_MEMORY);
if (retval) {
DEBUG (dev, "rx submit --> %d\n", retval);
- dev_kfree_skb_any (skb);
+ if (skb)
+ dev_kfree_skb_any(skb);
spin_lock(&dev->req_lock);
list_add (&req->list, &dev->rx_reqs);
spin_unlock(&dev->req_lock);
@@ -1766,7 +1770,6 @@ static void rx_complete (struct usb_ep *ep, struct usb_request *req)
break;
}
- skb->dev = dev->net;
skb->protocol = eth_type_trans (skb, dev->net);
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
new file mode 100644
index 000000000000..157054ea3978
--- /dev/null
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -0,0 +1,2500 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Author: Li Yang <leoli@freescale.com>
+ * Jiang Bo <tanya.jiang@freescale.com>
+ *
+ * Description:
+ * Freescale high-speed USB SOC DR module device controller driver.
+ * This can be found on MPC8349E/MPC8313E cpus.
+ * The driver is previously named as mpc_udc. Based on bare board
+ * code from Dave Liu and Shlomi Gridish.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#undef VERBOSE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb_gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/fsl_devices.h>
+#include <linux/dmapool.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+
+#include "fsl_usb2_udc.h"
+
+#define DRIVER_DESC "Freescale High-Speed USB SOC Device Controller driver"
+#define DRIVER_AUTHOR "Li Yang/Jiang Bo"
+#define DRIVER_VERSION "Apr 20, 2007"
+
+#define DMA_ADDR_INVALID (~(dma_addr_t)0)
+
+static const char driver_name[] = "fsl-usb2-udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+volatile static struct usb_dr_device *dr_regs = NULL;
+volatile static struct usb_sys_interface *usb_sys_regs = NULL;
+
+/* it is initialized in probe() */
+static struct fsl_udc *udc_controller = NULL;
+
+static const struct usb_endpoint_descriptor
+fsl_ep0_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0,
+ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
+ .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD,
+};
+
+static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state);
+static int fsl_udc_resume(struct platform_device *pdev);
+static void fsl_ep_fifo_flush(struct usb_ep *_ep);
+
+#ifdef CONFIG_PPC32
+#define fsl_readl(addr) in_le32(addr)
+#define fsl_writel(addr, val32) out_le32(val32, addr)
+#else
+#define fsl_readl(addr) readl(addr)
+#define fsl_writel(addr, val32) writel(addr, val32)
+#endif
+
+/********************************************************************
+ * Internal Used Function
+********************************************************************/
+/*-----------------------------------------------------------------
+ * done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ *--------------------------------------------------------------*/
+static void done(struct fsl_ep *ep, struct fsl_req *req, int status)
+{
+ struct fsl_udc *udc = NULL;
+ unsigned char stopped = ep->stopped;
+ struct ep_td_struct *curr_td, *next_td;
+ int j;
+
+ udc = (struct fsl_udc *)ep->udc;
+ /* Removed the req from fsl_ep->queue */
+ list_del_init(&req->queue);
+
+ /* req.status should be set as -EINPROGRESS in ep_queue() */
+ if (req->req.status == -EINPROGRESS)
+ req->req.status = status;
+ else
+ status = req->req.status;
+
+ /* Free dtd for the request */
+ next_td = req->head;
+ for (j = 0; j < req->dtd_count; j++) {
+ curr_td = next_td;
+ if (j != req->dtd_count - 1) {
+ next_td = curr_td->next_td_virt;
+ }
+ dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma);
+ }
+
+ if (req->mapped) {
+ dma_unmap_single(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->req.dma = DMA_ADDR_INVALID;
+ req->mapped = 0;
+ } else
+ dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ if (status && (status != -ESHUTDOWN))
+ VDBG("complete %s req %p stat %d len %u/%u",
+ ep->ep.name, &req->req, status,
+ req->req.actual, req->req.length);
+
+ ep->stopped = 1;
+
+ spin_unlock(&ep->udc->lock);
+ /* complete() is from gadget layer,
+ * eg fsg->bulk_in_complete() */
+ if (req->req.complete)
+ req->req.complete(&ep->ep, &req->req);
+
+ spin_lock(&ep->udc->lock);
+ ep->stopped = stopped;
+}
+
+/*-----------------------------------------------------------------
+ * nuke(): delete all requests related to this ep
+ * called with spinlock held
+ *--------------------------------------------------------------*/
+static void nuke(struct fsl_ep *ep, int status)
+{
+ ep->stopped = 1;
+
+ /* Flush fifo */
+ fsl_ep_fifo_flush(&ep->ep);
+
+ /* Whether this eq has request linked */
+ while (!list_empty(&ep->queue)) {
+ struct fsl_req *req = NULL;
+
+ req = list_entry(ep->queue.next, struct fsl_req, queue);
+ done(ep, req, status);
+ }
+}
+
+/*------------------------------------------------------------------
+ Internal Hardware related function
+ ------------------------------------------------------------------*/
+
+static int dr_controller_setup(struct fsl_udc *udc)
+{
+ unsigned int tmp = 0, portctrl = 0, ctrl = 0;
+ unsigned long timeout;
+#define FSL_UDC_RESET_TIMEOUT 1000
+
+ /* before here, make sure dr_regs has been initialized */
+ if (!udc)
+ return -EINVAL;
+
+ /* Stop and reset the usb controller */
+ tmp = fsl_readl(&dr_regs->usbcmd);
+ tmp &= ~USB_CMD_RUN_STOP;
+ fsl_writel(tmp, &dr_regs->usbcmd);
+
+ tmp = fsl_readl(&dr_regs->usbcmd);
+ tmp |= USB_CMD_CTRL_RESET;
+ fsl_writel(tmp, &dr_regs->usbcmd);
+
+ /* Wait for reset to complete */
+ timeout = jiffies + FSL_UDC_RESET_TIMEOUT;
+ while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) {
+ if (time_after(jiffies, timeout)) {
+ ERR("udc reset timeout! \n");
+ return -ETIMEDOUT;
+ }
+ cpu_relax();
+ }
+
+ /* Set the controller as device mode */
+ tmp = fsl_readl(&dr_regs->usbmode);
+ tmp |= USB_MODE_CTRL_MODE_DEVICE;
+ /* Disable Setup Lockout */
+ tmp |= USB_MODE_SETUP_LOCK_OFF;
+ fsl_writel(tmp, &dr_regs->usbmode);
+
+ /* Clear the setup status */
+ fsl_writel(0, &dr_regs->usbsts);
+
+ tmp = udc->ep_qh_dma;
+ tmp &= USB_EP_LIST_ADDRESS_MASK;
+ fsl_writel(tmp, &dr_regs->endpointlistaddr);
+
+ VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x",
+ (int)udc->ep_qh, (int)tmp,
+ fsl_readl(&dr_regs->endpointlistaddr));
+
+ /* Config PHY interface */
+ portctrl = fsl_readl(&dr_regs->portsc1);
+ portctrl &= ~PORTSCX_PHY_TYPE_SEL;
+ switch (udc->phy_mode) {
+ case FSL_USB2_PHY_ULPI:
+ portctrl |= PORTSCX_PTS_ULPI;
+ break;
+ case FSL_USB2_PHY_UTMI:
+ case FSL_USB2_PHY_UTMI_WIDE:
+ portctrl |= PORTSCX_PTS_UTMI;
+ break;
+ case FSL_USB2_PHY_SERIAL:
+ portctrl |= PORTSCX_PTS_FSLS;
+ break;
+ default:
+ return -EINVAL;
+ }
+ fsl_writel(portctrl, &dr_regs->portsc1);
+
+ /* Config control enable i/o output, cpu endian register */
+ ctrl = __raw_readl(&usb_sys_regs->control);
+ ctrl |= USB_CTRL_IOENB;
+ __raw_writel(ctrl, &usb_sys_regs->control);
+
+#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
+ /* Turn on cache snooping hardware, since some PowerPC platforms
+ * wholly rely on hardware to deal with cache coherent. */
+
+ /* Setup Snooping for all the 4GB space */
+ tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */
+ __raw_writel(tmp, &usb_sys_regs->snoop1);
+ tmp |= 0x80000000; /* starts from 0x8000000, size 2G */
+ __raw_writel(tmp, &usb_sys_regs->snoop2);
+#endif
+
+ return 0;
+}
+
+/* Enable DR irq and set controller to run state */
+static void dr_controller_run(struct fsl_udc *udc)
+{
+ u32 temp;
+
+ /* Enable DR irq reg */
+ temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN
+ | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN
+ | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN;
+
+ fsl_writel(temp, &dr_regs->usbintr);
+
+ /* Clear stopped bit */
+ udc->stopped = 0;
+
+ /* Set the controller as device mode */
+ temp = fsl_readl(&dr_regs->usbmode);
+ temp |= USB_MODE_CTRL_MODE_DEVICE;
+ fsl_writel(temp, &dr_regs->usbmode);
+
+ /* Set controller to Run */
+ temp = fsl_readl(&dr_regs->usbcmd);
+ temp |= USB_CMD_RUN_STOP;
+ fsl_writel(temp, &dr_regs->usbcmd);
+
+ return;
+}
+
+static void dr_controller_stop(struct fsl_udc *udc)
+{
+ unsigned int tmp;
+
+ /* disable all INTR */
+ fsl_writel(0, &dr_regs->usbintr);
+
+ /* Set stopped bit for isr */
+ udc->stopped = 1;
+
+ /* disable IO output */
+/* usb_sys_regs->control = 0; */
+
+ /* set controller to Stop */
+ tmp = fsl_readl(&dr_regs->usbcmd);
+ tmp &= ~USB_CMD_RUN_STOP;
+ fsl_writel(tmp, &dr_regs->usbcmd);
+
+ return;
+}
+
+void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type)
+{
+ unsigned int tmp_epctrl = 0;
+
+ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+ if (dir) {
+ if (ep_num)
+ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
+ tmp_epctrl |= EPCTRL_TX_ENABLE;
+ tmp_epctrl |= ((unsigned int)(ep_type)
+ << EPCTRL_TX_EP_TYPE_SHIFT);
+ } else {
+ if (ep_num)
+ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
+ tmp_epctrl |= EPCTRL_RX_ENABLE;
+ tmp_epctrl |= ((unsigned int)(ep_type)
+ << EPCTRL_RX_EP_TYPE_SHIFT);
+ }
+
+ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
+}
+
+static void
+dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value)
+{
+ u32 tmp_epctrl = 0;
+
+ tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+
+ if (value) {
+ /* set the stall bit */
+ if (dir)
+ tmp_epctrl |= EPCTRL_TX_EP_STALL;
+ else
+ tmp_epctrl |= EPCTRL_RX_EP_STALL;
+ } else {
+ /* clear the stall bit and reset data toggle */
+ if (dir) {
+ tmp_epctrl &= ~EPCTRL_TX_EP_STALL;
+ tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST;
+ } else {
+ tmp_epctrl &= ~EPCTRL_RX_EP_STALL;
+ tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST;
+ }
+ }
+ fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]);
+}
+
+/* Get stall status of a specific ep
+ Return: 0: not stalled; 1:stalled */
+static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir)
+{
+ u32 epctrl;
+
+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+ if (dir)
+ return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0;
+ else
+ return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0;
+}
+
+/********************************************************************
+ Internal Structure Build up functions
+********************************************************************/
+
+/*------------------------------------------------------------------
+* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH
+ * @zlt: Zero Length Termination Select (1: disable; 0: enable)
+ * @mult: Mult field
+ ------------------------------------------------------------------*/
+static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num,
+ unsigned char dir, unsigned char ep_type,
+ unsigned int max_pkt_len,
+ unsigned int zlt, unsigned char mult)
+{
+ struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir];
+ unsigned int tmp = 0;
+
+ /* set the Endpoint Capabilites in QH */
+ switch (ep_type) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ /* Interrupt On Setup (IOS). for control ep */
+ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+ | EP_QUEUE_HEAD_IOS;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+ | (mult << EP_QUEUE_HEAD_MULT_POS);
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS;
+ break;
+ default:
+ VDBG("error ep type is %d", ep_type);
+ return;
+ }
+ if (zlt)
+ tmp |= EP_QUEUE_HEAD_ZLT_SEL;
+ p_QH->max_pkt_length = cpu_to_le32(tmp);
+
+ return;
+}
+
+/* Setup qh structure and ep register for ep0. */
+static void ep0_setup(struct fsl_udc *udc)
+{
+ /* the intialization of an ep includes: fields in QH, Regs,
+ * fsl_ep struct */
+ struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL,
+ USB_MAX_CTRL_PAYLOAD, 0, 0);
+ struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL,
+ USB_MAX_CTRL_PAYLOAD, 0, 0);
+ dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL);
+ dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL);
+
+ return;
+
+}
+
+/***********************************************************************
+ Endpoint Management Functions
+***********************************************************************/
+
+/*-------------------------------------------------------------------------
+ * when configurations are set, or when interface settings change
+ * for example the do_set_interface() in gadget layer,
+ * the driver will enable or disable the relevant endpoints
+ * ep0 doesn't use this routine. It is always enabled.
+-------------------------------------------------------------------------*/
+static int fsl_ep_enable(struct usb_ep *_ep,
+ const struct usb_endpoint_descriptor *desc)
+{
+ struct fsl_udc *udc = NULL;
+ struct fsl_ep *ep = NULL;
+ unsigned short max = 0;
+ unsigned char mult = 0, zlt;
+ int retval = -EINVAL;
+ unsigned long flags = 0;
+
+ ep = container_of(_ep, struct fsl_ep, ep);
+
+ /* catch various bogus parameters */
+ if (!_ep || !desc || ep->desc
+ || (desc->bDescriptorType != USB_DT_ENDPOINT))
+ return -EINVAL;
+
+ udc = ep->udc;
+
+ if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN))
+ return -ESHUTDOWN;
+
+ max = le16_to_cpu(desc->wMaxPacketSize);
+
+ /* Disable automatic zlp generation. Driver is reponsible to indicate
+ * explicitly through req->req.zero. This is needed to enable multi-td
+ * request. */
+ zlt = 1;
+
+ /* Assume the max packet size from gadget is always correct */
+ switch (desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ /* mult = 0. Execute N Transactions as demonstrated by
+ * the USB variable length packet protocol where N is
+ * computed using the Maximum Packet Length (dQH) and
+ * the Total Bytes field (dTD) */
+ mult = 0;
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Calculate transactions needed for high bandwidth iso */
+ mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+ max = max & 0x8ff; /* bit 0~10 */
+ /* 3 transactions at most */
+ if (mult > 3)
+ goto en_done;
+ break;
+ default:
+ goto en_done;
+ }
+
+ spin_lock_irqsave(&udc->lock, flags);
+ ep->ep.maxpacket = max;
+ ep->desc = desc;
+ ep->stopped = 0;
+
+ /* Controller related setup */
+ /* Init EPx Queue Head (Ep Capabilites field in QH
+ * according to max, zlt, mult) */
+ struct_ep_qh_setup(udc, (unsigned char) ep_index(ep),
+ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+ ? USB_SEND : USB_RECV),
+ (unsigned char) (desc->bmAttributes
+ & USB_ENDPOINT_XFERTYPE_MASK),
+ max, zlt, mult);
+
+ /* Init endpoint ctrl register */
+ dr_ep_setup((unsigned char) ep_index(ep),
+ (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN)
+ ? USB_SEND : USB_RECV),
+ (unsigned char) (desc->bmAttributes
+ & USB_ENDPOINT_XFERTYPE_MASK));
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+ retval = 0;
+
+ VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name,
+ ep->desc->bEndpointAddress & 0x0f,
+ (desc->bEndpointAddress & USB_DIR_IN)
+ ? "in" : "out", max);
+en_done:
+ return retval;
+}
+
+/*---------------------------------------------------------------------
+ * @ep : the ep being unconfigured. May not be ep0
+ * Any pending and uncomplete req will complete with status (-ESHUTDOWN)
+*---------------------------------------------------------------------*/
+static int fsl_ep_disable(struct usb_ep *_ep)
+{
+ struct fsl_udc *udc = NULL;
+ struct fsl_ep *ep = NULL;
+ unsigned long flags = 0;
+ u32 epctrl;
+ int ep_num;
+
+ ep = container_of(_ep, struct fsl_ep, ep);
+ if (!_ep || !ep->desc) {
+ VDBG("%s not enabled", _ep ? ep->ep.name : NULL);
+ return -EINVAL;
+ }
+
+ /* disable ep on controller */
+ ep_num = ep_index(ep);
+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+ if (ep_is_in(ep))
+ epctrl &= ~EPCTRL_TX_ENABLE;
+ else
+ epctrl &= ~EPCTRL_RX_ENABLE;
+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+
+ udc = (struct fsl_udc *)ep->udc;
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* nuke all pending requests (does flush) */
+ nuke(ep, -ESHUTDOWN);
+
+ ep->desc = 0;
+ ep->stopped = 1;
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ VDBG("disabled %s OK", _ep->name);
+ return 0;
+}
+
+/*---------------------------------------------------------------------
+ * allocate a request object used by this endpoint
+ * the main operation is to insert the req->queue to the eq->queue
+ * Returns the request, or null if one could not be allocated
+*---------------------------------------------------------------------*/
+static struct usb_request *
+fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+ struct fsl_req *req = NULL;
+
+ req = kzalloc(sizeof *req, gfp_flags);
+ if (!req)
+ return NULL;
+
+ req->req.dma = DMA_ADDR_INVALID;
+ INIT_LIST_HEAD(&req->queue);
+
+ return &req->req;
+}
+
+static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fsl_req *req = NULL;
+
+ req = container_of(_req, struct fsl_req, req);
+
+ if (_req)
+ kfree(req);
+}
+
+/*------------------------------------------------------------------
+ * Allocate an I/O buffer
+*---------------------------------------------------------------------*/
+static void *fsl_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
+ dma_addr_t *dma, gfp_t gfp_flags)
+{
+ struct fsl_ep *ep;
+
+ if (!_ep)
+ return NULL;
+
+ ep = container_of(_ep, struct fsl_ep, ep);
+
+ return dma_alloc_coherent(ep->udc->gadget.dev.parent,
+ bytes, dma, gfp_flags);
+}
+
+/*------------------------------------------------------------------
+ * frees an i/o buffer
+*---------------------------------------------------------------------*/
+static void fsl_free_buffer(struct usb_ep *_ep, void *buf,
+ dma_addr_t dma, unsigned bytes)
+{
+ struct fsl_ep *ep;
+
+ if (!_ep)
+ return NULL;
+
+ ep = container_of(_ep, struct fsl_ep, ep);
+
+ dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma);
+}
+
+/*-------------------------------------------------------------------------*/
+static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
+{
+ int i = ep_index(ep) * 2 + ep_is_in(ep);
+ u32 temp, bitmask, tmp_stat;
+ struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
+
+ /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
+ VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
+
+ bitmask = ep_is_in(ep)
+ ? (1 << (ep_index(ep) + 16))
+ : (1 << (ep_index(ep)));
+
+ /* check if the pipe is empty */
+ if (!(list_empty(&ep->queue))) {
+ /* Add td to the end */
+ struct fsl_req *lastreq;
+ lastreq = list_entry(ep->queue.prev, struct fsl_req, queue);
+ lastreq->tail->next_td_ptr =
+ cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK);
+ /* Read prime bit, if 1 goto done */
+ if (fsl_readl(&dr_regs->endpointprime) & bitmask)
+ goto out;
+
+ do {
+ /* Set ATDTW bit in USBCMD */
+ temp = fsl_readl(&dr_regs->usbcmd);
+ fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd);
+
+ /* Read correct status bit */
+ tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask;
+
+ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW));
+
+ /* Write ATDTW bit to 0 */
+ temp = fsl_readl(&dr_regs->usbcmd);
+ fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
+
+ if (tmp_stat)
+ goto out;
+ }
+
+ /* Write dQH next pointer and terminate bit to 0 */
+ temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+ dQH->next_dtd_ptr = cpu_to_le32(temp);
+
+ /* Clear active and halt bit */
+ temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
+ | EP_QUEUE_HEAD_STATUS_HALT));
+ dQH->size_ioc_int_sts &= temp;
+
+ /* Prime endpoint by writing 1 to ENDPTPRIME */
+ temp = ep_is_in(ep)
+ ? (1 << (ep_index(ep) + 16))
+ : (1 << (ep_index(ep)));
+ fsl_writel(temp, &dr_regs->endpointprime);
+out:
+ return 0;
+}
+
+/* Fill in the dTD structure
+ * @req: request that the transfer belongs to
+ * @length: return actually data length of the dTD
+ * @dma: return dma address of the dTD
+ * @is_last: return flag if it is the last dTD of the request
+ * return: pointer to the built dTD */
+static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length,
+ dma_addr_t *dma, int *is_last)
+{
+ u32 swap_temp;
+ struct ep_td_struct *dtd;
+
+ /* how big will this transfer be? */
+ *length = min(req->req.length - req->req.actual,
+ (unsigned)EP_MAX_LENGTH_TRANSFER);
+
+ dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma);
+ if (dtd == NULL)
+ return dtd;
+
+ dtd->td_dma = *dma;
+ /* Clear reserved field */
+ swap_temp = cpu_to_le32(dtd->size_ioc_sts);
+ swap_temp &= ~DTD_RESERVED_FIELDS;
+ dtd->size_ioc_sts = cpu_to_le32(swap_temp);
+
+ /* Init all of buffer page pointers */
+ swap_temp = (u32) (req->req.dma + req->req.actual);
+ dtd->buff_ptr0 = cpu_to_le32(swap_temp);
+ dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000);
+ dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000);
+ dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000);
+ dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000);
+
+ req->req.actual += *length;
+
+ /* zlp is needed if req->req.zero is set */
+ if (req->req.zero) {
+ if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+ *is_last = 1;
+ else
+ *is_last = 0;
+ } else if (req->req.length == req->req.actual)
+ *is_last = 1;
+ else
+ *is_last = 0;
+
+ if ((*is_last) == 0)
+ VDBG("multi-dtd request!\n");
+ /* Fill in the transfer size; set active bit */
+ swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+
+ /* Enable interrupt for the last dtd of a request */
+ if (*is_last && !req->req.no_interrupt)
+ swap_temp |= DTD_IOC;
+
+ dtd->size_ioc_sts = cpu_to_le32(swap_temp);
+
+ mb();
+
+ VDBG("length = %d address= 0x%x", *length, (int)*dma);
+
+ return dtd;
+}
+
+/* Generate dtd chain for a request */
+static int fsl_req_to_dtd(struct fsl_req *req)
+{
+ unsigned count;
+ int is_last;
+ int is_first =1;
+ struct ep_td_struct *last_dtd = NULL, *dtd;
+ dma_addr_t dma;
+
+ do {
+ dtd = fsl_build_dtd(req, &count, &dma, &is_last);
+ if (dtd == NULL)
+ return -ENOMEM;
+
+ if (is_first) {
+ is_first = 0;
+ req->head = dtd;
+ } else {
+ last_dtd->next_td_ptr = cpu_to_le32(dma);
+ last_dtd->next_td_virt = dtd;
+ }
+ last_dtd = dtd;
+
+ req->dtd_count++;
+ } while (!is_last);
+
+ dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE);
+
+ req->tail = dtd;
+
+ return 0;
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
+ struct fsl_req *req = container_of(_req, struct fsl_req, req);
+ struct fsl_udc *udc;
+ unsigned long flags;
+ int is_iso = 0;
+
+ /* catch various bogus parameters */
+ if (!_req || !req->req.complete || !req->req.buf
+ || !list_empty(&req->queue)) {
+ VDBG("%s, bad params\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (!_ep || (!ep->desc && ep_index(ep))) {
+ VDBG("%s, bad ep\n", __FUNCTION__);
+ return -EINVAL;
+ }
+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ if (req->req.length > ep->ep.maxpacket)
+ return -EMSGSIZE;
+ is_iso = 1;
+ }
+
+ udc = ep->udc;
+ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+ return -ESHUTDOWN;
+
+ req->ep = ep;
+
+ /* map virtual address to hardware */
+ if (req->req.dma == DMA_ADDR_INVALID) {
+ req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+ req->req.buf,
+ req->req.length, ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->mapped = 1;
+ } else {
+ dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+ req->req.dma, req->req.length,
+ ep_is_in(ep)
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ req->mapped = 0;
+ }
+
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->dtd_count = 0;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* build dtds and push them to device queue */
+ if (!fsl_req_to_dtd(req)) {
+ fsl_queue_td(ep, req);
+ } else {
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return -ENOMEM;
+ }
+
+ /* Update ep0 state */
+ if ((ep_index(ep) == 0))
+ udc->ep0_state = DATA_STATE_XMIT;
+
+ /* irq handler advances the queue */
+ if (req != NULL)
+ list_add_tail(&req->queue, &ep->queue);
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+ struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep);
+ struct fsl_req *req;
+ unsigned long flags;
+ int ep_num, stopped, ret = 0;
+ u32 epctrl;
+
+ if (!_ep || !_req)
+ return -EINVAL;
+
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ stopped = ep->stopped;
+
+ /* Stop the ep before we deal with the queue */
+ ep->stopped = 1;
+ ep_num = ep_index(ep);
+ epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+ if (ep_is_in(ep))
+ epctrl &= ~EPCTRL_TX_ENABLE;
+ else
+ epctrl &= ~EPCTRL_RX_ENABLE;
+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+
+ /* make sure it's actually queued on this endpoint */
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (&req->req == _req)
+ break;
+ }
+ if (&req->req != _req) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* The request is in progress, or completed but not dequeued */
+ if (ep->queue.next == &req->queue) {
+ _req->status = -ECONNRESET;
+ fsl_ep_fifo_flush(_ep); /* flush current transfer */
+
+ /* The request isn't the last request in this ep queue */
+ if (req->queue.next != &ep->queue) {
+ struct ep_queue_head *qh;
+ struct fsl_req *next_req;
+
+ qh = ep->qh;
+ next_req = list_entry(req->queue.next, struct fsl_req,
+ queue);
+
+ /* Point the QH to the first TD of next request */
+ fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
+ }
+
+ /* The request hasn't been processed, patch up the TD chain */
+ } else {
+ struct fsl_req *prev_req;
+
+ prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
+ fsl_writel(fsl_readl(&req->tail->next_td_ptr),
+ &prev_req->tail->next_td_ptr);
+
+ }
+
+ done(ep, req, -ECONNRESET);
+
+ /* Enable EP */
+out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]);
+ if (ep_is_in(ep))
+ epctrl |= EPCTRL_TX_ENABLE;
+ else
+ epctrl |= EPCTRL_RX_ENABLE;
+ fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]);
+ ep->stopped = stopped;
+
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*-----------------------------------------------------------------
+ * modify the endpoint halt feature
+ * @ep: the non-isochronous endpoint being stalled
+ * @value: 1--set halt 0--clear halt
+ * Returns zero, or a negative error code.
+*----------------------------------------------------------------*/
+static int fsl_ep_set_halt(struct usb_ep *_ep, int value)
+{
+ struct fsl_ep *ep = NULL;
+ unsigned long flags = 0;
+ int status = -EOPNOTSUPP; /* operation not supported */
+ unsigned char ep_dir = 0, ep_num = 0;
+ struct fsl_udc *udc = NULL;
+
+ ep = container_of(_ep, struct fsl_ep, ep);
+ udc = ep->udc;
+ if (!_ep || !ep->desc) {
+ status = -EINVAL;
+ goto out;
+ }
+
+ if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+ status = -EOPNOTSUPP;
+ goto out;
+ }
+
+ /* Attempt to halt IN ep will fail if any transfer requests
+ * are still queue */
+ if (value && ep_is_in(ep) && !list_empty(&ep->queue)) {
+ status = -EAGAIN;
+ goto out;
+ }
+
+ status = 0;
+ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
+ ep_num = (unsigned char)(ep_index(ep));
+ spin_lock_irqsave(&ep->udc->lock, flags);
+ dr_ep_change_stall(ep_num, ep_dir, value);
+ spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+ if (ep_index(ep) == 0) {
+ udc->ep0_state = WAIT_FOR_SETUP;
+ udc->ep0_dir = 0;
+ }
+out:
+ VDBG(" %s %s halt stat %d", ep->ep.name,
+ value ? "set" : "clear", status);
+
+ return status;
+}
+
+static void fsl_ep_fifo_flush(struct usb_ep *_ep)
+{
+ struct fsl_ep *ep;
+ int ep_num, ep_dir;
+ u32 bits;
+ unsigned long timeout;
+#define FSL_UDC_FLUSH_TIMEOUT 1000
+
+ if (!_ep) {
+ return;
+ } else {
+ ep = container_of(_ep, struct fsl_ep, ep);
+ if (!ep->desc)
+ return;
+ }
+ ep_num = ep_index(ep);
+ ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV;
+
+ if (ep_num == 0)
+ bits = (1 << 16) | 1;
+ else if (ep_dir == USB_SEND)
+ bits = 1 << (16 + ep_num);
+ else
+ bits = 1 << ep_num;
+
+ timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT;
+ do {
+ fsl_writel(bits, &dr_regs->endptflush);
+
+ /* Wait until flush complete */
+ while (fsl_readl(&dr_regs->endptflush)) {
+ if (time_after(jiffies, timeout)) {
+ ERR("ep flush timeout\n");
+ return;
+ }
+ cpu_relax();
+ }
+ /* See if we need to flush again */
+ } while (fsl_readl(&dr_regs->endptstatus) & bits);
+}
+
+static struct usb_ep_ops fsl_ep_ops = {
+ .enable = fsl_ep_enable,
+ .disable = fsl_ep_disable,
+
+ .alloc_request = fsl_alloc_request,
+ .free_request = fsl_free_request,
+
+ .alloc_buffer = fsl_alloc_buffer,
+ .free_buffer = fsl_free_buffer,
+
+ .queue = fsl_ep_queue,
+ .dequeue = fsl_ep_dequeue,
+
+ .set_halt = fsl_ep_set_halt,
+ .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */
+};
+
+/*-------------------------------------------------------------------------
+ Gadget Driver Layer Operations
+-------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------
+ * Get the current frame number (from DR frame_index Reg )
+ *----------------------------------------------------------------------*/
+static int fsl_get_frame(struct usb_gadget *gadget)
+{
+ return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS);
+}
+
+/*-----------------------------------------------------------------------
+ * Tries to wake up the host connected to this gadget
+ -----------------------------------------------------------------------*/
+static int fsl_wakeup(struct usb_gadget *gadget)
+{
+ struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget);
+ u32 portsc;
+
+ /* Remote wakeup feature not enabled by host */
+ if (!udc->remote_wakeup)
+ return -ENOTSUPP;
+
+ portsc = fsl_readl(&dr_regs->portsc1);
+ /* not suspended? */
+ if (!(portsc & PORTSCX_PORT_SUSPEND))
+ return 0;
+ /* trigger force resume */
+ portsc |= PORTSCX_PORT_FORCE_RESUME;
+ fsl_writel(portsc, &dr_regs->portsc1);
+ return 0;
+}
+
+static int can_pullup(struct fsl_udc *udc)
+{
+ return udc->driver && udc->softconnect && udc->vbus_active;
+}
+
+/* Notify controller that VBUS is powered, Called by whatever
+ detects VBUS sessions */
+static int fsl_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+ struct fsl_udc *udc;
+ unsigned long flags;
+
+ udc = container_of(gadget, struct fsl_udc, gadget);
+ spin_lock_irqsave(&udc->lock, flags);
+ VDBG("VBUS %s\n", is_active ? "on" : "off");
+ udc->vbus_active = (is_active != 0);
+ if (can_pullup(udc))
+ fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
+ &dr_regs->usbcmd);
+ else
+ fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
+ &dr_regs->usbcmd);
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return 0;
+}
+
+/* constrain controller's VBUS power usage
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume. For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+#ifdef CONFIG_USB_OTG
+ struct fsl_udc *udc;
+
+ udc = container_of(gadget, struct fsl_udc, gadget);
+
+ if (udc->transceiver)
+ return otg_set_power(udc->transceiver, mA);
+#endif
+ return -ENOTSUPP;
+}
+
+/* Change Data+ pullup status
+ * this func is used by usb_gadget_connect/disconnet
+ */
+static int fsl_pullup(struct usb_gadget *gadget, int is_on)
+{
+ struct fsl_udc *udc;
+
+ udc = container_of(gadget, struct fsl_udc, gadget);
+ udc->softconnect = (is_on != 0);
+ if (can_pullup(udc))
+ fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
+ &dr_regs->usbcmd);
+ else
+ fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
+ &dr_regs->usbcmd);
+
+ return 0;
+}
+
+/* defined in usb_gadget.h */
+static struct usb_gadget_ops fsl_gadget_ops = {
+ .get_frame = fsl_get_frame,
+ .wakeup = fsl_wakeup,
+/* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */
+ .vbus_session = fsl_vbus_session,
+ .vbus_draw = fsl_vbus_draw,
+ .pullup = fsl_pullup,
+};
+
+/* Set protocol stall on ep0, protocol stall will automatically be cleared
+ on new transaction */
+static void ep0stall(struct fsl_udc *udc)
+{
+ u32 tmp;
+
+ /* must set tx and rx to stall at the same time */
+ tmp = fsl_readl(&dr_regs->endptctrl[0]);
+ tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL;
+ fsl_writel(tmp, &dr_regs->endptctrl[0]);
+ udc->ep0_state = WAIT_FOR_SETUP;
+ udc->ep0_dir = 0;
+}
+
+/* Prime a status phase for ep0 */
+static int ep0_prime_status(struct fsl_udc *udc, int direction)
+{
+ struct fsl_req *req = udc->status_req;
+ struct fsl_ep *ep;
+ int status = 0;
+
+ if (direction == EP_DIR_IN)
+ udc->ep0_dir = USB_DIR_IN;
+ else
+ udc->ep0_dir = USB_DIR_OUT;
+
+ ep = &udc->eps[0];
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
+
+ req->ep = ep;
+ req->req.length = 0;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ if (fsl_req_to_dtd(req) == 0)
+ status = fsl_queue_td(ep, req);
+ else
+ return -ENOMEM;
+
+ if (status)
+ ERR("Can't queue ep0 status request \n");
+ list_add_tail(&req->queue, &ep->queue);
+
+ return status;
+}
+
+static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
+{
+ struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
+
+ if (!ep->name)
+ return 0;
+
+ nuke(ep, -ESHUTDOWN);
+
+ return 0;
+}
+
+/*
+ * ch9 Set address
+ */
+static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length)
+{
+ /* Save the new address to device struct */
+ udc->device_address = (u8) value;
+ /* Update usb state */
+ udc->usb_state = USB_STATE_ADDRESS;
+ /* Status phase */
+ if (ep0_prime_status(udc, EP_DIR_IN))
+ ep0stall(udc);
+}
+
+/*
+ * ch9 Get status
+ */
+static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
+ u16 index, u16 length)
+{
+ u16 tmp = 0; /* Status, cpu endian */
+
+ struct fsl_req *req;
+ struct fsl_ep *ep;
+ int status = 0;
+
+ ep = &udc->eps[0];
+
+ if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+ /* Get device status */
+ tmp = 1 << USB_DEVICE_SELF_POWERED;
+ tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) {
+ /* Get interface status */
+ /* We don't have interface information in udc driver */
+ tmp = 0;
+ } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) {
+ /* Get endpoint status */
+ struct fsl_ep *target_ep;
+
+ target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index));
+
+ /* stall if endpoint doesn't exist */
+ if (!target_ep->desc)
+ goto stall;
+ tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep))
+ << USB_ENDPOINT_HALT;
+ }
+
+ udc->ep0_dir = USB_DIR_IN;
+ /* Borrow the per device status_req */
+ req = udc->status_req;
+ /* Fill in the reqest structure */
+ *((u16 *) req->req.buf) = cpu_to_le16(tmp);
+ req->ep = ep;
+ req->req.length = 2;
+ req->req.status = -EINPROGRESS;
+ req->req.actual = 0;
+ req->req.complete = NULL;
+ req->dtd_count = 0;
+
+ /* prime the data phase */
+ if ((fsl_req_to_dtd(req) == 0))
+ status = fsl_queue_td(ep, req);
+ else /* no mem */
+ goto stall;
+
+ if (status) {
+ ERR("Can't respond to getstatus request \n");
+ goto stall;
+ }
+ list_add_tail(&req->queue, &ep->queue);
+ udc->ep0_state = DATA_STATE_XMIT;
+ return;
+stall:
+ ep0stall(udc);
+}
+
+static void setup_received_irq(struct fsl_udc *udc,
+ struct usb_ctrlrequest *setup)
+{
+ u16 wValue = le16_to_cpu(setup->wValue);
+ u16 wIndex = le16_to_cpu(setup->wIndex);
+ u16 wLength = le16_to_cpu(setup->wLength);
+
+ udc_reset_ep_queue(udc, 0);
+
+ switch (setup->bRequest) {
+ /* Request that need Data+Status phase from udc */
+ case USB_REQ_GET_STATUS:
+ if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD))
+ != (USB_DIR_IN | USB_TYPE_STANDARD))
+ break;
+ ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength);
+ break;
+
+ /* Requests that need Status phase from udc */
+ case USB_REQ_SET_ADDRESS:
+ if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD
+ | USB_RECIP_DEVICE))
+ break;
+ ch9setaddress(udc, wValue, wIndex, wLength);
+ break;
+
+ /* Handled by udc, no data, status by udc */
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ { /* status transaction */
+ int rc = -EOPNOTSUPP;
+
+ if ((setup->bRequestType & USB_RECIP_MASK)
+ == USB_RECIP_ENDPOINT) {
+ int pipe = get_pipe_by_windex(wIndex);
+ struct fsl_ep *ep;
+
+ if (wValue != 0 || wLength != 0 || pipe > udc->max_ep)
+ break;
+ ep = get_ep_by_pipe(udc, pipe);
+
+ spin_unlock(&udc->lock);
+ rc = fsl_ep_set_halt(&ep->ep,
+ (setup->bRequest == USB_REQ_SET_FEATURE)
+ ? 1 : 0);
+ spin_lock(&udc->lock);
+
+ } else if ((setup->bRequestType & USB_RECIP_MASK)
+ == USB_RECIP_DEVICE) {
+ /* Note: The driver has not include OTG support yet.
+ * This will be set when OTG support is added */
+ if (!udc->gadget.is_otg)
+ break;
+ else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
+ udc->gadget.b_hnp_enable = 1;
+ else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT)
+ udc->gadget.a_hnp_support = 1;
+ else if (setup->bRequest ==
+ USB_DEVICE_A_ALT_HNP_SUPPORT)
+ udc->gadget.a_alt_hnp_support = 1;
+ rc = 0;
+ }
+ if (rc == 0) {
+ if (ep0_prime_status(udc, EP_DIR_IN))
+ ep0stall(udc);
+ }
+ break;
+ }
+ /* Requests handled by gadget */
+ default:
+ if (wLength) {
+ /* Data phase from gadget, status phase from udc */
+ udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+ ? USB_DIR_IN : USB_DIR_OUT;
+ spin_unlock(&udc->lock);
+ if (udc->driver->setup(&udc->gadget,
+ &udc->local_setup_buff) < 0)
+ ep0stall(udc);
+ spin_lock(&udc->lock);
+ udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+ ? DATA_STATE_XMIT : DATA_STATE_RECV;
+
+ } else {
+ /* No data phase, IN status from gadget */
+ udc->ep0_dir = USB_DIR_IN;
+ spin_unlock(&udc->lock);
+ if (udc->driver->setup(&udc->gadget,
+ &udc->local_setup_buff) < 0)
+ ep0stall(udc);
+ spin_lock(&udc->lock);
+ udc->ep0_state = WAIT_FOR_OUT_STATUS;
+ }
+ break;
+ }
+}
+
+/* Process request for Data or Status phase of ep0
+ * prime status phase if needed */
+static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
+ struct fsl_req *req)
+{
+ if (udc->usb_state == USB_STATE_ADDRESS) {
+ /* Set the new address */
+ u32 new_address = (u32) udc->device_address;
+ fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS,
+ &dr_regs->deviceaddr);
+ }
+
+ done(ep0, req, 0);
+
+ switch (udc->ep0_state) {
+ case DATA_STATE_XMIT:
+ /* receive status phase */
+ if (ep0_prime_status(udc, EP_DIR_OUT))
+ ep0stall(udc);
+ break;
+ case DATA_STATE_RECV:
+ /* send status phase */
+ if (ep0_prime_status(udc, EP_DIR_IN))
+ ep0stall(udc);
+ break;
+ case WAIT_FOR_OUT_STATUS:
+ udc->ep0_state = WAIT_FOR_SETUP;
+ break;
+ case WAIT_FOR_SETUP:
+ ERR("Unexpect ep0 packets \n");
+ break;
+ default:
+ ep0stall(udc);
+ break;
+ }
+}
+
+/* Tripwire mechanism to ensure a setup packet payload is extracted without
+ * being corrupted by another incoming setup packet */
+static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr)
+{
+ u32 temp;
+ struct ep_queue_head *qh;
+
+ qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT];
+
+ /* Clear bit in ENDPTSETUPSTAT */
+ temp = fsl_readl(&dr_regs->endptsetupstat);
+ fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat);
+
+ /* while a hazard exists when setup package arrives */
+ do {
+ /* Set Setup Tripwire */
+ temp = fsl_readl(&dr_regs->usbcmd);
+ fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd);
+
+ /* Copy the setup packet to local buffer */
+ memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8);
+ } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW));
+
+ /* Clear Setup Tripwire */
+ temp = fsl_readl(&dr_regs->usbcmd);
+ fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd);
+}
+
+/* process-ep_req(): free the completed Tds for this req */
+static int process_ep_req(struct fsl_udc *udc, int pipe,
+ struct fsl_req *curr_req)
+{
+ struct ep_td_struct *curr_td;
+ int td_complete, actual, remaining_length, j, tmp;
+ int status = 0;
+ int errors = 0;
+ struct ep_queue_head *curr_qh = &udc->ep_qh[pipe];
+ int direction = pipe % 2;
+
+ curr_td = curr_req->head;
+ td_complete = 0;
+ actual = curr_req->req.length;
+
+ for (j = 0; j < curr_req->dtd_count; j++) {
+ remaining_length = (le32_to_cpu(curr_td->size_ioc_sts)
+ & DTD_PACKET_SIZE)
+ >> DTD_LENGTH_BIT_POS;
+ actual -= remaining_length;
+
+ if ((errors = le32_to_cpu(curr_td->size_ioc_sts) &
+ DTD_ERROR_MASK)) {
+ if (errors & DTD_STATUS_HALTED) {
+ ERR("dTD error %08x QH=%d\n", errors, pipe);
+ /* Clear the errors and Halt condition */
+ tmp = le32_to_cpu(curr_qh->size_ioc_int_sts);
+ tmp &= ~errors;
+ curr_qh->size_ioc_int_sts = cpu_to_le32(tmp);
+ status = -EPIPE;
+ /* FIXME: continue with next queued TD? */
+
+ break;
+ }
+ if (errors & DTD_STATUS_DATA_BUFF_ERR) {
+ VDBG("Transfer overflow");
+ status = -EPROTO;
+ break;
+ } else if (errors & DTD_STATUS_TRANSACTION_ERR) {
+ VDBG("ISO error");
+ status = -EILSEQ;
+ break;
+ } else
+ ERR("Unknown error has occured (0x%x)!\r\n",
+ errors);
+
+ } else if (le32_to_cpu(curr_td->size_ioc_sts)
+ & DTD_STATUS_ACTIVE) {
+ VDBG("Request not complete");
+ status = REQ_UNCOMPLETE;
+ return status;
+ } else if (remaining_length) {
+ if (direction) {
+ VDBG("Transmit dTD remaining length not zero");
+ status = -EPROTO;
+ break;
+ } else {
+ td_complete++;
+ break;
+ }
+ } else {
+ td_complete++;
+ VDBG("dTD transmitted successful ");
+ }
+
+ if (j != curr_req->dtd_count - 1)
+ curr_td = (struct ep_td_struct *)curr_td->next_td_virt;
+ }
+
+ if (status)
+ return status;
+
+ curr_req->req.actual = actual;
+
+ return 0;
+}
+
+/* Process a DTD completion interrupt */
+static void dtd_complete_irq(struct fsl_udc *udc)
+{
+ u32 bit_pos;
+ int i, ep_num, direction, bit_mask, status;
+ struct fsl_ep *curr_ep;
+ struct fsl_req *curr_req, *temp_req;
+
+ /* Clear the bits in the register */
+ bit_pos = fsl_readl(&dr_regs->endptcomplete);
+ fsl_writel(bit_pos, &dr_regs->endptcomplete);
+
+ if (!bit_pos)
+ return;
+
+ for (i = 0; i < udc->max_ep * 2; i++) {
+ ep_num = i >> 1;
+ direction = i % 2;
+
+ bit_mask = 1 << (ep_num + 16 * direction);
+
+ if (!(bit_pos & bit_mask))
+ continue;
+
+ curr_ep = get_ep_by_pipe(udc, i);
+
+ /* If the ep is configured */
+ if (curr_ep->name == NULL) {
+ WARN("Invalid EP?");
+ continue;
+ }
+
+ /* process the req queue until an uncomplete request */
+ list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue,
+ queue) {
+ status = process_ep_req(udc, i, curr_req);
+
+ VDBG("status of process_ep_req= %d, ep = %d",
+ status, ep_num);
+ if (status == REQ_UNCOMPLETE)
+ break;
+ /* write back status to req */
+ curr_req->req.status = status;
+
+ if (ep_num == 0) {
+ ep0_req_complete(udc, curr_ep, curr_req);
+ break;
+ } else
+ done(curr_ep, curr_req, status);
+ }
+ }
+}
+
+/* Process a port change interrupt */
+static void port_change_irq(struct fsl_udc *udc)
+{
+ u32 speed;
+
+ if (udc->bus_reset)
+ udc->bus_reset = 0;
+
+ /* Bus resetting is finished */
+ if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) {
+ /* Get the speed */
+ speed = (fsl_readl(&dr_regs->portsc1)
+ & PORTSCX_PORT_SPEED_MASK);
+ switch (speed) {
+ case PORTSCX_PORT_SPEED_HIGH:
+ udc->gadget.speed = USB_SPEED_HIGH;
+ break;
+ case PORTSCX_PORT_SPEED_FULL:
+ udc->gadget.speed = USB_SPEED_FULL;
+ break;
+ case PORTSCX_PORT_SPEED_LOW:
+ udc->gadget.speed = USB_SPEED_LOW;
+ break;
+ default:
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ break;
+ }
+ }
+
+ /* Update USB state */
+ if (!udc->resume_state)
+ udc->usb_state = USB_STATE_DEFAULT;
+}
+
+/* Process suspend interrupt */
+static void suspend_irq(struct fsl_udc *udc)
+{
+ udc->resume_state = udc->usb_state;
+ udc->usb_state = USB_STATE_SUSPENDED;
+
+ /* report suspend to the driver, serial.c does not support this */
+ if (udc->driver->suspend)
+ udc->driver->suspend(&udc->gadget);
+}
+
+static void bus_resume(struct fsl_udc *udc)
+{
+ udc->usb_state = udc->resume_state;
+ udc->resume_state = 0;
+
+ /* report resume to the driver, serial.c does not support this */
+ if (udc->driver->resume)
+ udc->driver->resume(&udc->gadget);
+}
+
+/* Clear up all ep queues */
+static int reset_queues(struct fsl_udc *udc)
+{
+ u8 pipe;
+
+ for (pipe = 0; pipe < udc->max_pipes; pipe++)
+ udc_reset_ep_queue(udc, pipe);
+
+ /* report disconnect; the driver is already quiesced */
+ udc->driver->disconnect(&udc->gadget);
+
+ return 0;
+}
+
+/* Process reset interrupt */
+static void reset_irq(struct fsl_udc *udc)
+{
+ u32 temp;
+ unsigned long timeout;
+
+ /* Clear the device address */
+ temp = fsl_readl(&dr_regs->deviceaddr);
+ fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr);
+
+ udc->device_address = 0;
+
+ /* Clear usb state */
+ udc->resume_state = 0;
+ udc->ep0_dir = 0;
+ udc->ep0_state = WAIT_FOR_SETUP;
+ udc->remote_wakeup = 0; /* default to 0 on reset */
+ udc->gadget.b_hnp_enable = 0;
+ udc->gadget.a_hnp_support = 0;
+ udc->gadget.a_alt_hnp_support = 0;
+
+ /* Clear all the setup token semaphores */
+ temp = fsl_readl(&dr_regs->endptsetupstat);
+ fsl_writel(temp, &dr_regs->endptsetupstat);
+
+ /* Clear all the endpoint complete status bits */
+ temp = fsl_readl(&dr_regs->endptcomplete);
+ fsl_writel(temp, &dr_regs->endptcomplete);
+
+ timeout = jiffies + 100;
+ while (fsl_readl(&dr_regs->endpointprime)) {
+ /* Wait until all endptprime bits cleared */
+ if (time_after(jiffies, timeout)) {
+ ERR("Timeout for reset\n");
+ break;
+ }
+ cpu_relax();
+ }
+
+ /* Write 1s to the flush register */
+ fsl_writel(0xffffffff, &dr_regs->endptflush);
+
+ if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) {
+ VDBG("Bus reset");
+ /* Bus is reseting */
+ udc->bus_reset = 1;
+ /* Reset all the queues, include XD, dTD, EP queue
+ * head and TR Queue */
+ reset_queues(udc);
+ udc->usb_state = USB_STATE_DEFAULT;
+ } else {
+ VDBG("Controller reset");
+ /* initialize usb hw reg except for regs for EP, not
+ * touch usbintr reg */
+ dr_controller_setup(udc);
+
+ /* Reset all internal used Queues */
+ reset_queues(udc);
+
+ ep0_setup(udc);
+
+ /* Enable DR IRQ reg, Set Run bit, change udc state */
+ dr_controller_run(udc);
+ udc->usb_state = USB_STATE_ATTACHED;
+ }
+}
+
+/*
+ * USB device controller interrupt handler
+ */
+static irqreturn_t fsl_udc_irq(int irq, void *_udc)
+{
+ struct fsl_udc *udc = _udc;
+ u32 irq_src;
+ irqreturn_t status = IRQ_NONE;
+ unsigned long flags;
+
+ /* Disable ISR for OTG host mode */
+ if (udc->stopped)
+ return IRQ_NONE;
+ spin_lock_irqsave(&udc->lock, flags);
+ irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr);
+ /* Clear notification bits */
+ fsl_writel(irq_src, &dr_regs->usbsts);
+
+ /* VDBG("irq_src [0x%8x]", irq_src); */
+
+ /* Need to resume? */
+ if (udc->usb_state == USB_STATE_SUSPENDED)
+ if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0)
+ bus_resume(udc);
+
+ /* USB Interrupt */
+ if (irq_src & USB_STS_INT) {
+ VDBG("Packet int");
+ /* Setup package, we only support ep0 as control ep */
+ if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) {
+ tripwire_handler(udc, 0,
+ (u8 *) (&udc->local_setup_buff));
+ setup_received_irq(udc, &udc->local_setup_buff);
+ status = IRQ_HANDLED;
+ }
+
+ /* completion of dtd */
+ if (fsl_readl(&dr_regs->endptcomplete)) {
+ dtd_complete_irq(udc);
+ status = IRQ_HANDLED;
+ }
+ }
+
+ /* SOF (for ISO transfer) */
+ if (irq_src & USB_STS_SOF) {
+ status = IRQ_HANDLED;
+ }
+
+ /* Port Change */
+ if (irq_src & USB_STS_PORT_CHANGE) {
+ port_change_irq(udc);
+ status = IRQ_HANDLED;
+ }
+
+ /* Reset Received */
+ if (irq_src & USB_STS_RESET) {
+ reset_irq(udc);
+ status = IRQ_HANDLED;
+ }
+
+ /* Sleep Enable (Suspend) */
+ if (irq_src & USB_STS_SUSPEND) {
+ suspend_irq(udc);
+ status = IRQ_HANDLED;
+ }
+
+ if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) {
+ VDBG("Error IRQ %x ", irq_src);
+ }
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+ return status;
+}
+
+/*----------------------------------------------------------------*
+ * Hook to gadget drivers
+ * Called by initialization code of gadget drivers
+*----------------------------------------------------------------*/
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+ int retval = -ENODEV;
+ unsigned long flags = 0;
+
+ if (!udc_controller)
+ return -ENODEV;
+
+ if (!driver || (driver->speed != USB_SPEED_FULL
+ && driver->speed != USB_SPEED_HIGH)
+ || !driver->bind || !driver->disconnect
+ || !driver->setup)
+ return -EINVAL;
+
+ if (udc_controller->driver)
+ return -EBUSY;
+
+ /* lock is needed but whether should use this lock or another */
+ spin_lock_irqsave(&udc_controller->lock, flags);
+
+ driver->driver.bus = 0;
+ /* hook up the driver */
+ udc_controller->driver = driver;
+ udc_controller->gadget.dev.driver = &driver->driver;
+ spin_unlock_irqrestore(&udc_controller->lock, flags);
+
+ /* bind udc driver to gadget driver */
+ retval = driver->bind(&udc_controller->gadget);
+ if (retval) {
+ VDBG("bind to %s --> %d", driver->driver.name, retval);
+ udc_controller->gadget.dev.driver = 0;
+ udc_controller->driver = 0;
+ goto out;
+ }
+
+ /* Enable DR IRQ reg and Set usbcmd reg Run bit */
+ dr_controller_run(udc_controller);
+ udc_controller->usb_state = USB_STATE_ATTACHED;
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = 0;
+ printk(KERN_INFO "%s: bind to driver %s \n",
+ udc_controller->gadget.name, driver->driver.name);
+
+out:
+ if (retval)
+ printk("retval %d \n", retval);
+ return retval;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+/* Disconnect from gadget driver */
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct fsl_ep *loop_ep;
+ unsigned long flags;
+
+ if (!udc_controller)
+ return -ENODEV;
+
+ if (!driver || driver != udc_controller->driver || !driver->unbind)
+ return -EINVAL;
+
+#ifdef CONFIG_USB_OTG
+ if (udc_controller->transceiver)
+ (void)otg_set_peripheral(udc_controller->transceiver, 0);
+#endif
+
+ /* stop DR, disable intr */
+ dr_controller_stop(udc_controller);
+
+ /* in fact, no needed */
+ udc_controller->usb_state = USB_STATE_ATTACHED;
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = 0;
+
+ /* stand operation */
+ spin_lock_irqsave(&udc_controller->lock, flags);
+ udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+ nuke(&udc_controller->eps[0], -ESHUTDOWN);
+ list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list,
+ ep.ep_list)
+ nuke(loop_ep, -ESHUTDOWN);
+ spin_unlock_irqrestore(&udc_controller->lock, flags);
+
+ /* unbind gadget and unhook driver. */
+ driver->unbind(&udc_controller->gadget);
+ udc_controller->gadget.dev.driver = 0;
+ udc_controller->driver = 0;
+
+ printk("unregistered gadget driver '%s'\r\n", driver->driver.name);
+ return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+/*-------------------------------------------------------------------------
+ PROC File System Support
+-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+
+#include <linux/seq_file.h>
+
+static const char proc_filename[] = "driver/fsl_usb2_udc";
+
+static int fsl_proc_read(char *page, char **start, off_t off, int count,
+ int *eof, void *_dev)
+{
+ char *buf = page;
+ char *next = buf;
+ unsigned size = count;
+ unsigned long flags;
+ int t, i;
+ u32 tmp_reg;
+ struct fsl_ep *ep = NULL;
+ struct fsl_req *req;
+
+ struct fsl_udc *udc = udc_controller;
+ if (off != 0)
+ return 0;
+
+ spin_lock_irqsave(&udc->lock, flags);
+
+ /* ------basic driver infomation ---- */
+ t = scnprintf(next, size,
+ DRIVER_DESC "\n"
+ "%s version: %s\n"
+ "Gadget driver: %s\n\n",
+ driver_name, DRIVER_VERSION,
+ udc->driver ? udc->driver->driver.name : "(none)");
+ size -= t;
+ next += t;
+
+ /* ------ DR Registers ----- */
+ tmp_reg = fsl_readl(&dr_regs->usbcmd);
+ t = scnprintf(next, size,
+ "USBCMD reg:\n"
+ "SetupTW: %d\n"
+ "Run/Stop: %s\n\n",
+ (tmp_reg & USB_CMD_SUTW) ? 1 : 0,
+ (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop");
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->usbsts);
+ t = scnprintf(next, size,
+ "USB Status Reg:\n"
+ "Dr Suspend: %d" "Reset Received: %d" "System Error: %s"
+ "USB Error Interrupt: %s\n\n",
+ (tmp_reg & USB_STS_SUSPEND) ? 1 : 0,
+ (tmp_reg & USB_STS_RESET) ? 1 : 0,
+ (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal",
+ (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err");
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->usbintr);
+ t = scnprintf(next, size,
+ "USB Intrrupt Enable Reg:\n"
+ "Sleep Enable: %d" "SOF Received Enable: %d"
+ "Reset Enable: %d\n"
+ "System Error Enable: %d"
+ "Port Change Dectected Enable: %d\n"
+ "USB Error Intr Enable: %d" "USB Intr Enable: %d\n\n",
+ (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0,
+ (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0,
+ (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0,
+ (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0,
+ (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0,
+ (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0,
+ (tmp_reg & USB_INTR_INT_EN) ? 1 : 0);
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->frindex);
+ t = scnprintf(next, size,
+ "USB Frame Index Reg:" "Frame Number is 0x%x\n\n",
+ (tmp_reg & USB_FRINDEX_MASKS));
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->deviceaddr);
+ t = scnprintf(next, size,
+ "USB Device Address Reg:" "Device Addr is 0x%x\n\n",
+ (tmp_reg & USB_DEVICE_ADDRESS_MASK));
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->endpointlistaddr);
+ t = scnprintf(next, size,
+ "USB Endpoint List Address Reg:"
+ "Device Addr is 0x%x\n\n",
+ (tmp_reg & USB_EP_LIST_ADDRESS_MASK));
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->portsc1);
+ t = scnprintf(next, size,
+ "USB Port Status&Control Reg:\n"
+ "Port Transceiver Type : %s" "Port Speed: %s \n"
+ "PHY Low Power Suspend: %s" "Port Reset: %s"
+ "Port Suspend Mode: %s \n" "Over-current Change: %s"
+ "Port Enable/Disable Change: %s\n"
+ "Port Enabled/Disabled: %s"
+ "Current Connect Status: %s\n\n", ( {
+ char *s;
+ switch (tmp_reg & PORTSCX_PTS_FSLS) {
+ case PORTSCX_PTS_UTMI:
+ s = "UTMI"; break;
+ case PORTSCX_PTS_ULPI:
+ s = "ULPI "; break;
+ case PORTSCX_PTS_FSLS:
+ s = "FS/LS Serial"; break;
+ default:
+ s = "None"; break;
+ }
+ s;} ), ( {
+ char *s;
+ switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) {
+ case PORTSCX_PORT_SPEED_FULL:
+ s = "Full Speed"; break;
+ case PORTSCX_PORT_SPEED_LOW:
+ s = "Low Speed"; break;
+ case PORTSCX_PORT_SPEED_HIGH:
+ s = "High Speed"; break;
+ default:
+ s = "Undefined"; break;
+ }
+ s;
+ } ),
+ (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ?
+ "Normal PHY mode" : "Low power mode",
+ (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" :
+ "Not in Reset",
+ (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in",
+ (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" :
+ "No",
+ (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" :
+ "Not change",
+ (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" :
+ "Not correct",
+ (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ?
+ "Attached" : "Not-Att");
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->usbmode);
+ t = scnprintf(next, size,
+ "USB Mode Reg:" "Controller Mode is : %s\n\n", ( {
+ char *s;
+ switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) {
+ case USB_MODE_CTRL_MODE_IDLE:
+ s = "Idle"; break;
+ case USB_MODE_CTRL_MODE_DEVICE:
+ s = "Device Controller"; break;
+ case USB_MODE_CTRL_MODE_HOST:
+ s = "Host Controller"; break;
+ default:
+ s = "None"; break;
+ }
+ s;
+ } ));
+ size -= t;
+ next += t;
+
+ tmp_reg = fsl_readl(&dr_regs->endptsetupstat);
+ t = scnprintf(next, size,
+ "Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n",
+ (tmp_reg & EP_SETUP_STATUS_MASK));
+ size -= t;
+ next += t;
+
+ for (i = 0; i < udc->max_ep / 2; i++) {
+ tmp_reg = fsl_readl(&dr_regs->endptctrl[i]);
+ t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n",
+ i, tmp_reg);
+ size -= t;
+ next += t;
+ }
+ tmp_reg = fsl_readl(&dr_regs->endpointprime);
+ t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg);
+ size -= t;
+ next += t;
+
+ tmp_reg = usb_sys_regs->snoop1;
+ t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg);
+ size -= t;
+ next += t;
+
+ tmp_reg = usb_sys_regs->control;
+ t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n",
+ tmp_reg);
+ size -= t;
+ next += t;
+
+ /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
+ ep = &udc->eps[0];
+ t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n",
+ ep->ep.name, ep_maxpacket(ep), ep_index(ep));
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size, "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length 0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ }
+ }
+ /* other gadget->eplist ep */
+ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+ if (ep->desc) {
+ t = scnprintf(next, size,
+ "\nFor %s Maxpkt is 0x%x "
+ "index is 0x%x\n",
+ ep->ep.name, ep_maxpacket(ep),
+ ep_index(ep));
+ size -= t;
+ next += t;
+
+ if (list_empty(&ep->queue)) {
+ t = scnprintf(next, size,
+ "its req queue is empty\n\n");
+ size -= t;
+ next += t;
+ } else {
+ list_for_each_entry(req, &ep->queue, queue) {
+ t = scnprintf(next, size,
+ "req %p actual 0x%x length"
+ "0x%x buf %p\n",
+ &req->req, req->req.actual,
+ req->req.length, req->req.buf);
+ size -= t;
+ next += t;
+ } /* end for each_entry of ep req */
+ } /* end for else */
+ } /* end for if(ep->queue) */
+ } /* end (ep->desc) */
+
+ spin_unlock_irqrestore(&udc->lock, flags);
+
+ *eof = 1;
+ return count - size;
+}
+
+#define create_proc_file() create_proc_read_entry(proc_filename, \
+ 0, NULL, fsl_proc_read, NULL)
+
+#define remove_proc_file() remove_proc_entry(proc_filename, NULL)
+
+#else /* !CONFIG_USB_GADGET_DEBUG_FILES */
+
+#define create_proc_file() do {} while (0)
+#define remove_proc_file() do {} while (0)
+
+#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
+
+/*-------------------------------------------------------------------------*/
+
+/* Release udc structures */
+static void fsl_udc_release(struct device *dev)
+{
+ complete(udc_controller->done);
+ dma_free_coherent(dev, udc_controller->ep_qh_size,
+ udc_controller->ep_qh, udc_controller->ep_qh_dma);
+ kfree(udc_controller);
+}
+
+/******************************************************************
+ Internal structure setup functions
+*******************************************************************/
+/*------------------------------------------------------------------
+ * init resource for globle controller
+ * Return the udc handle on success or NULL on failure
+ ------------------------------------------------------------------*/
+static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev)
+{
+ struct fsl_udc *udc;
+ struct fsl_usb2_platform_data *pdata;
+ size_t size;
+
+ udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
+ if (udc == NULL) {
+ ERR("malloc udc failed\n");
+ return NULL;
+ }
+
+ pdata = pdev->dev.platform_data;
+ udc->phy_mode = pdata->phy_mode;
+ /* max_ep_nr is bidirectional ep number, max_ep doubles the number */
+ udc->max_ep = pdata->max_ep_nr * 2;
+
+ udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL);
+ if (!udc->eps) {
+ ERR("malloc fsl_ep failed\n");
+ goto cleanup;
+ }
+
+ /* initialized QHs, take care of alignment */
+ size = udc->max_ep * sizeof(struct ep_queue_head);
+ if (size < QH_ALIGNMENT)
+ size = QH_ALIGNMENT;
+ else if ((size % QH_ALIGNMENT) != 0) {
+ size += QH_ALIGNMENT + 1;
+ size &= ~(QH_ALIGNMENT - 1);
+ }
+ udc->ep_qh = dma_alloc_coherent(&pdev->dev, size,
+ &udc->ep_qh_dma, GFP_KERNEL);
+ if (!udc->ep_qh) {
+ ERR("malloc QHs for udc failed\n");
+ kfree(udc->eps);
+ goto cleanup;
+ }
+
+ udc->ep_qh_size = size;
+
+ /* Initialize ep0 status request structure */
+ /* FIXME: fsl_alloc_request() ignores ep argument */
+ udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL),
+ struct fsl_req, req);
+ /* allocate a small amount of memory to get valid address */
+ udc->status_req->req.buf = kmalloc(8, GFP_KERNEL);
+ udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
+
+ udc->resume_state = USB_STATE_NOTATTACHED;
+ udc->usb_state = USB_STATE_POWERED;
+ udc->ep0_dir = 0;
+ udc->remote_wakeup = 0; /* default to 0 on reset */
+ spin_lock_init(&udc->lock);
+
+ return udc;
+
+cleanup:
+ kfree(udc);
+ return NULL;
+}
+
+/*----------------------------------------------------------------
+ * Setup the fsl_ep struct for eps
+ * Link fsl_ep->ep to gadget->ep_list
+ * ep0out is not used so do nothing here
+ * ep0in should be taken care
+ *--------------------------------------------------------------*/
+static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
+ char *name, int link)
+{
+ struct fsl_ep *ep = &udc->eps[index];
+
+ ep->udc = udc;
+ strcpy(ep->name, name);
+ ep->ep.name = ep->name;
+
+ ep->ep.ops = &fsl_ep_ops;
+ ep->stopped = 0;
+
+ /* for ep0: maxP defined in desc
+ * for other eps, maxP is set by epautoconfig() called by gadget layer
+ */
+ ep->ep.maxpacket = (unsigned short) ~0;
+
+ /* the queue lists any req for this ep */
+ INIT_LIST_HEAD(&ep->queue);
+
+ /* gagdet.ep_list used for ep_autoconfig so no ep0 */
+ if (link)
+ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+ ep->gadget = &udc->gadget;
+ ep->qh = &udc->ep_qh[index];
+
+ return 0;
+}
+
+/* Driver probe function
+ * all intialize operations implemented here except enabling usb_intr reg
+ */
+static int __init fsl_udc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret = -ENODEV;
+ unsigned int i;
+
+ if (strcmp(pdev->name, driver_name)) {
+ VDBG("Wrong device\n");
+ return -ENODEV;
+ }
+
+ /* board setup should have been done in the platform code */
+
+ /* Initialize the udc structure including QH member and other member */
+ udc_controller = struct_udc_setup(pdev);
+ if (!udc_controller) {
+ VDBG("udc_controller is NULL \n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENXIO;
+
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ driver_name)) {
+ ERR("request mem region for %s failed \n", pdev->name);
+ return -EBUSY;
+ }
+
+ dr_regs = ioremap(res->start, res->end - res->start + 1);
+ if (!dr_regs) {
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ usb_sys_regs = (struct usb_sys_interface *)
+ ((u32)dr_regs + USB_DR_SYS_OFFSET);
+
+ udc_controller->irq = platform_get_irq(pdev, 0);
+ if (!udc_controller->irq) {
+ ret = -ENODEV;
+ goto err2;
+ }
+
+ ret = request_irq(udc_controller->irq, fsl_udc_irq, SA_SHIRQ,
+ driver_name, udc_controller);
+ if (ret != 0) {
+ ERR("cannot request irq %d err %d \n",
+ udc_controller->irq, ret);
+ goto err2;
+ }
+
+ /* initialize usb hw reg except for regs for EP,
+ * leave usbintr reg untouched */
+ dr_controller_setup(udc_controller);
+
+ /* Setup gadget structure */
+ udc_controller->gadget.ops = &fsl_gadget_ops;
+ udc_controller->gadget.is_dualspeed = 1;
+ udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
+ INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
+ udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+ udc_controller->gadget.name = driver_name;
+
+ /* Setup gadget.dev and register with kernel */
+ strcpy(udc_controller->gadget.dev.bus_id, "gadget");
+ udc_controller->gadget.dev.release = fsl_udc_release;
+ udc_controller->gadget.dev.parent = &pdev->dev;
+ ret = device_register(&udc_controller->gadget.dev);
+ if (ret < 0)
+ goto err3;
+
+ /* setup QH and epctrl for ep0 */
+ ep0_setup(udc_controller);
+
+ /* setup udc->eps[] for ep0 */
+ struct_ep_setup(udc_controller, 0, "ep0", 0);
+ /* for ep0: the desc defined here;
+ * for other eps, gadget layer called ep_enable with defined desc
+ */
+ udc_controller->eps[0].desc = &fsl_ep0_desc;
+ udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD;
+
+ /* setup the udc->eps[] for non-control endpoints and link
+ * to gadget.ep_list */
+ for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) {
+ char name[14];
+
+ sprintf(name, "ep%dout", i);
+ struct_ep_setup(udc_controller, i * 2, name, 1);
+ sprintf(name, "ep%din", i);
+ struct_ep_setup(udc_controller, i * 2 + 1, name, 1);
+ }
+
+ /* use dma_pool for TD management */
+ udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev,
+ sizeof(struct ep_td_struct),
+ DTD_ALIGNMENT, UDC_DMA_BOUNDARY);
+ if (udc_controller->td_pool == NULL) {
+ ret = -ENOMEM;
+ goto err4;
+ }
+ create_proc_file();
+ return 0;
+
+err4:
+ device_unregister(&udc_controller->gadget.dev);
+err3:
+ free_irq(udc_controller->irq, udc_controller);
+err2:
+ iounmap(dr_regs);
+err1:
+ release_mem_region(res->start, res->end - res->start + 1);
+ return ret;
+}
+
+/* Driver removal function
+ * Free resources and finish pending transactions
+ */
+static int __exit fsl_udc_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ DECLARE_COMPLETION(done);
+
+ if (!udc_controller)
+ return -ENODEV;
+ udc_controller->done = &done;
+
+ /* DR has been stopped in usb_gadget_unregister_driver() */
+ remove_proc_file();
+
+ /* Free allocated memory */
+ kfree(udc_controller->status_req->req.buf);
+ kfree(udc_controller->status_req);
+ kfree(udc_controller->eps);
+
+ dma_pool_destroy(udc_controller->td_pool);
+ free_irq(udc_controller->irq, udc_controller);
+ iounmap(dr_regs);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ device_unregister(&udc_controller->gadget.dev);
+ /* free udc --wait for the release() finished */
+ wait_for_completion(&done);
+
+ return 0;
+}
+
+/*-----------------------------------------------------------------
+ * Modify Power management attributes
+ * Used by OTG statemachine to disable gadget temporarily
+ -----------------------------------------------------------------*/
+static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ dr_controller_stop(udc_controller);
+ return 0;
+}
+
+/*-----------------------------------------------------------------
+ * Invoked on USB resume. May be called in_interrupt.
+ * Here we start the DR controller and enable the irq
+ *-----------------------------------------------------------------*/
+static int fsl_udc_resume(struct platform_device *pdev)
+{
+ /* Enable DR irq reg and set controller Run */
+ if (udc_controller->stopped) {
+ dr_controller_setup(udc_controller);
+ dr_controller_run(udc_controller);
+ }
+ udc_controller->usb_state = USB_STATE_ATTACHED;
+ udc_controller->ep0_state = WAIT_FOR_SETUP;
+ udc_controller->ep0_dir = 0;
+ return 0;
+}
+
+/*-------------------------------------------------------------------------
+ Register entry point for the peripheral controller driver
+--------------------------------------------------------------------------*/
+
+static struct platform_driver udc_driver = {
+ .remove = __exit_p(fsl_udc_remove),
+ /* these suspend and resume are not usb suspend and resume */
+ .suspend = fsl_udc_suspend,
+ .resume = fsl_udc_resume,
+ .driver = {
+ .name = (char *)driver_name,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init udc_init(void)
+{
+ printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION);
+ return platform_driver_probe(&udc_driver, fsl_udc_probe);
+}
+
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+ platform_driver_unregister(&udc_driver);
+ printk("%s unregistered \n", driver_desc);
+}
+
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
new file mode 100644
index 000000000000..c6291e046507
--- /dev/null
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -0,0 +1,579 @@
+/*
+ * Freescale USB device/endpoint management registers
+ */
+#ifndef __FSL_USB2_UDC_H
+#define __FSL_USB2_UDC_H
+
+/* ### define USB registers here
+ */
+#define USB_MAX_CTRL_PAYLOAD 64
+#define USB_DR_SYS_OFFSET 0x400
+
+ /* USB DR device mode registers (Little Endian) */
+struct usb_dr_device {
+ /* Capability register */
+ u8 res1[256];
+ u16 caplength; /* Capability Register Length */
+ u16 hciversion; /* Host Controller Interface Version */
+ u32 hcsparams; /* Host Controller Structual Parameters */
+ u32 hccparams; /* Host Controller Capability Parameters */
+ u8 res2[20];
+ u32 dciversion; /* Device Controller Interface Version */
+ u32 dccparams; /* Device Controller Capability Parameters */
+ u8 res3[24];
+ /* Operation register */
+ u32 usbcmd; /* USB Command Register */
+ u32 usbsts; /* USB Status Register */
+ u32 usbintr; /* USB Interrupt Enable Register */
+ u32 frindex; /* Frame Index Register */
+ u8 res4[4];
+ u32 deviceaddr; /* Device Address */
+ u32 endpointlistaddr; /* Endpoint List Address Register */
+ u8 res5[4];
+ u32 burstsize; /* Master Interface Data Burst Size Register */
+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
+ u8 res6[24];
+ u32 configflag; /* Configure Flag Register */
+ u32 portsc1; /* Port 1 Status and Control Register */
+ u8 res7[28];
+ u32 otgsc; /* On-The-Go Status and Control */
+ u32 usbmode; /* USB Mode Register */
+ u32 endptsetupstat; /* Endpoint Setup Status Register */
+ u32 endpointprime; /* Endpoint Initialization Register */
+ u32 endptflush; /* Endpoint Flush Register */
+ u32 endptstatus; /* Endpoint Status Register */
+ u32 endptcomplete; /* Endpoint Complete Register */
+ u32 endptctrl[6]; /* Endpoint Control Registers */
+};
+
+ /* USB DR host mode registers (Little Endian) */
+struct usb_dr_host {
+ /* Capability register */
+ u8 res1[256];
+ u16 caplength; /* Capability Register Length */
+ u16 hciversion; /* Host Controller Interface Version */
+ u32 hcsparams; /* Host Controller Structual Parameters */
+ u32 hccparams; /* Host Controller Capability Parameters */
+ u8 res2[20];
+ u32 dciversion; /* Device Controller Interface Version */
+ u32 dccparams; /* Device Controller Capability Parameters */
+ u8 res3[24];
+ /* Operation register */
+ u32 usbcmd; /* USB Command Register */
+ u32 usbsts; /* USB Status Register */
+ u32 usbintr; /* USB Interrupt Enable Register */
+ u32 frindex; /* Frame Index Register */
+ u8 res4[4];
+ u32 periodiclistbase; /* Periodic Frame List Base Address Register */
+ u32 asynclistaddr; /* Current Asynchronous List Address Register */
+ u8 res5[4];
+ u32 burstsize; /* Master Interface Data Burst Size Register */
+ u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */
+ u8 res6[24];
+ u32 configflag; /* Configure Flag Register */
+ u32 portsc1; /* Port 1 Status and Control Register */
+ u8 res7[28];
+ u32 otgsc; /* On-The-Go Status and Control */
+ u32 usbmode; /* USB Mode Register */
+ u32 endptsetupstat; /* Endpoint Setup Status Register */
+ u32 endpointprime; /* Endpoint Initialization Register */
+ u32 endptflush; /* Endpoint Flush Register */
+ u32 endptstatus; /* Endpoint Status Register */
+ u32 endptcomplete; /* Endpoint Complete Register */
+ u32 endptctrl[6]; /* Endpoint Control Registers */
+};
+
+ /* non-EHCI USB system interface registers (Big Endian) */
+struct usb_sys_interface {
+ u32 snoop1;
+ u32 snoop2;
+ u32 age_cnt_thresh; /* Age Count Threshold Register */
+ u32 pri_ctrl; /* Priority Control Register */
+ u32 si_ctrl; /* System Interface Control Register */
+ u8 res[236];
+ u32 control; /* General Purpose Control Register */
+};
+
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP 0
+#define DATA_STATE_XMIT 1
+#define DATA_STATE_NEED_ZLP 2
+#define WAIT_FOR_OUT_STATUS 3
+#define DATA_STATE_RECV 4
+
+/* Frame Index Register Bit Masks */
+#define USB_FRINDEX_MASKS 0x3fff
+/* USB CMD Register Bit Masks */
+#define USB_CMD_RUN_STOP 0x00000001
+#define USB_CMD_CTRL_RESET 0x00000002
+#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010
+#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020
+#define USB_CMD_INT_AA_DOORBELL 0x00000040
+#define USB_CMD_ASP 0x00000300
+#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800
+#define USB_CMD_SUTW 0x00002000
+#define USB_CMD_ATDTW 0x00004000
+#define USB_CMD_ITC 0x00FF0000
+
+/* bit 15,3,2 are frame list size */
+#define USB_CMD_FRAME_SIZE_1024 0x00000000
+#define USB_CMD_FRAME_SIZE_512 0x00000004
+#define USB_CMD_FRAME_SIZE_256 0x00000008
+#define USB_CMD_FRAME_SIZE_128 0x0000000C
+#define USB_CMD_FRAME_SIZE_64 0x00008000
+#define USB_CMD_FRAME_SIZE_32 0x00008004
+#define USB_CMD_FRAME_SIZE_16 0x00008008
+#define USB_CMD_FRAME_SIZE_8 0x0000800C
+
+/* bit 9-8 are async schedule park mode count */
+#define USB_CMD_ASP_00 0x00000000
+#define USB_CMD_ASP_01 0x00000100
+#define USB_CMD_ASP_10 0x00000200
+#define USB_CMD_ASP_11 0x00000300
+#define USB_CMD_ASP_BIT_POS 8
+
+/* bit 23-16 are interrupt threshold control */
+#define USB_CMD_ITC_NO_THRESHOLD 0x00000000
+#define USB_CMD_ITC_1_MICRO_FRM 0x00010000
+#define USB_CMD_ITC_2_MICRO_FRM 0x00020000
+#define USB_CMD_ITC_4_MICRO_FRM 0x00040000
+#define USB_CMD_ITC_8_MICRO_FRM 0x00080000
+#define USB_CMD_ITC_16_MICRO_FRM 0x00100000
+#define USB_CMD_ITC_32_MICRO_FRM 0x00200000
+#define USB_CMD_ITC_64_MICRO_FRM 0x00400000
+#define USB_CMD_ITC_BIT_POS 16
+
+/* USB STS Register Bit Masks */
+#define USB_STS_INT 0x00000001
+#define USB_STS_ERR 0x00000002
+#define USB_STS_PORT_CHANGE 0x00000004
+#define USB_STS_FRM_LST_ROLL 0x00000008
+#define USB_STS_SYS_ERR 0x00000010
+#define USB_STS_IAA 0x00000020
+#define USB_STS_RESET 0x00000040
+#define USB_STS_SOF 0x00000080
+#define USB_STS_SUSPEND 0x00000100
+#define USB_STS_HC_HALTED 0x00001000
+#define USB_STS_RCL 0x00002000
+#define USB_STS_PERIODIC_SCHEDULE 0x00004000
+#define USB_STS_ASYNC_SCHEDULE 0x00008000
+
+/* USB INTR Register Bit Masks */
+#define USB_INTR_INT_EN 0x00000001
+#define USB_INTR_ERR_INT_EN 0x00000002
+#define USB_INTR_PTC_DETECT_EN 0x00000004
+#define USB_INTR_FRM_LST_ROLL_EN 0x00000008
+#define USB_INTR_SYS_ERR_EN 0x00000010
+#define USB_INTR_ASYN_ADV_EN 0x00000020
+#define USB_INTR_RESET_EN 0x00000040
+#define USB_INTR_SOF_EN 0x00000080
+#define USB_INTR_DEVICE_SUSPEND 0x00000100
+
+/* Device Address bit masks */
+#define USB_DEVICE_ADDRESS_MASK 0xFE000000
+#define USB_DEVICE_ADDRESS_BIT_POS 25
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK 0xfffff800
+
+/* PORTSCX Register Bit Masks */
+#define PORTSCX_CURRENT_CONNECT_STATUS 0x00000001
+#define PORTSCX_CONNECT_STATUS_CHANGE 0x00000002
+#define PORTSCX_PORT_ENABLE 0x00000004
+#define PORTSCX_PORT_EN_DIS_CHANGE 0x00000008
+#define PORTSCX_OVER_CURRENT_ACT 0x00000010
+#define PORTSCX_OVER_CURRENT_CHG 0x00000020
+#define PORTSCX_PORT_FORCE_RESUME 0x00000040
+#define PORTSCX_PORT_SUSPEND 0x00000080
+#define PORTSCX_PORT_RESET 0x00000100
+#define PORTSCX_LINE_STATUS_BITS 0x00000C00
+#define PORTSCX_PORT_POWER 0x00001000
+#define PORTSCX_PORT_INDICTOR_CTRL 0x0000C000
+#define PORTSCX_PORT_TEST_CTRL 0x000F0000
+#define PORTSCX_WAKE_ON_CONNECT_EN 0x00100000
+#define PORTSCX_WAKE_ON_CONNECT_DIS 0x00200000
+#define PORTSCX_WAKE_ON_OVER_CURRENT 0x00400000
+#define PORTSCX_PHY_LOW_POWER_SPD 0x00800000
+#define PORTSCX_PORT_FORCE_FULL_SPEED 0x01000000
+#define PORTSCX_PORT_SPEED_MASK 0x0C000000
+#define PORTSCX_PORT_WIDTH 0x10000000
+#define PORTSCX_PHY_TYPE_SEL 0xC0000000
+
+/* bit 11-10 are line status */
+#define PORTSCX_LINE_STATUS_SE0 0x00000000
+#define PORTSCX_LINE_STATUS_JSTATE 0x00000400
+#define PORTSCX_LINE_STATUS_KSTATE 0x00000800
+#define PORTSCX_LINE_STATUS_UNDEF 0x00000C00
+#define PORTSCX_LINE_STATUS_BIT_POS 10
+
+/* bit 15-14 are port indicator control */
+#define PORTSCX_PIC_OFF 0x00000000
+#define PORTSCX_PIC_AMBER 0x00004000
+#define PORTSCX_PIC_GREEN 0x00008000
+#define PORTSCX_PIC_UNDEF 0x0000C000
+#define PORTSCX_PIC_BIT_POS 14
+
+/* bit 19-16 are port test control */
+#define PORTSCX_PTC_DISABLE 0x00000000
+#define PORTSCX_PTC_JSTATE 0x00010000
+#define PORTSCX_PTC_KSTATE 0x00020000
+#define PORTSCX_PTC_SEQNAK 0x00030000
+#define PORTSCX_PTC_PACKET 0x00040000
+#define PORTSCX_PTC_FORCE_EN 0x00050000
+#define PORTSCX_PTC_BIT_POS 16
+
+/* bit 27-26 are port speed */
+#define PORTSCX_PORT_SPEED_FULL 0x00000000
+#define PORTSCX_PORT_SPEED_LOW 0x04000000
+#define PORTSCX_PORT_SPEED_HIGH 0x08000000
+#define PORTSCX_PORT_SPEED_UNDEF 0x0C000000
+#define PORTSCX_SPEED_BIT_POS 26
+
+/* bit 28 is parallel transceiver width for UTMI interface */
+#define PORTSCX_PTW 0x10000000
+#define PORTSCX_PTW_8BIT 0x00000000
+#define PORTSCX_PTW_16BIT 0x10000000
+
+/* bit 31-30 are port transceiver select */
+#define PORTSCX_PTS_UTMI 0x00000000
+#define PORTSCX_PTS_ULPI 0x80000000
+#define PORTSCX_PTS_FSLS 0xC0000000
+#define PORTSCX_PTS_BIT_POS 30
+
+/* otgsc Register Bit Masks */
+#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001
+#define OTGSC_CTRL_VUSB_CHARGE 0x00000002
+#define OTGSC_CTRL_OTG_TERM 0x00000008
+#define OTGSC_CTRL_DATA_PULSING 0x00000010
+#define OTGSC_STS_USB_ID 0x00000100
+#define OTGSC_STS_A_VBUS_VALID 0x00000200
+#define OTGSC_STS_A_SESSION_VALID 0x00000400
+#define OTGSC_STS_B_SESSION_VALID 0x00000800
+#define OTGSC_STS_B_SESSION_END 0x00001000
+#define OTGSC_STS_1MS_TOGGLE 0x00002000
+#define OTGSC_STS_DATA_PULSING 0x00004000
+#define OTGSC_INTSTS_USB_ID 0x00010000
+#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000
+#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000
+#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000
+#define OTGSC_INTSTS_B_SESSION_END 0x00100000
+#define OTGSC_INTSTS_1MS 0x00200000
+#define OTGSC_INTSTS_DATA_PULSING 0x00400000
+#define OTGSC_INTR_USB_ID 0x01000000
+#define OTGSC_INTR_A_VBUS_VALID 0x02000000
+#define OTGSC_INTR_A_SESSION_VALID 0x04000000
+#define OTGSC_INTR_B_SESSION_VALID 0x08000000
+#define OTGSC_INTR_B_SESSION_END 0x10000000
+#define OTGSC_INTR_1MS_TIMER 0x20000000
+#define OTGSC_INTR_DATA_PULSING 0x40000000
+
+/* USB MODE Register Bit Masks */
+#define USB_MODE_CTRL_MODE_IDLE 0x00000000
+#define USB_MODE_CTRL_MODE_DEVICE 0x00000002
+#define USB_MODE_CTRL_MODE_HOST 0x00000003
+#define USB_MODE_CTRL_MODE_RSV 0x00000001
+#define USB_MODE_SETUP_LOCK_OFF 0x00000008
+#define USB_MODE_STREAM_DISABLE 0x00000010
+/* Endpoint Flush Register */
+#define EPFLUSH_TX_OFFSET 0x00010000
+#define EPFLUSH_RX_OFFSET 0x00000000
+
+/* Endpoint Setup Status bit masks */
+#define EP_SETUP_STATUS_MASK 0x0000003F
+#define EP_SETUP_STATUS_EP0 0x00000001
+
+/* ENDPOINTCTRLx Register Bit Masks */
+#define EPCTRL_TX_ENABLE 0x00800000
+#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */
+#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */
+#define EPCTRL_TX_TYPE 0x000C0000
+#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */
+#define EPCTRL_TX_EP_STALL 0x00010000
+#define EPCTRL_RX_ENABLE 0x00000080
+#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */
+#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */
+#define EPCTRL_RX_TYPE 0x0000000C
+#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */
+#define EPCTRL_RX_EP_STALL 0x00000001
+
+/* bit 19-18 and 3-2 are endpoint type */
+#define EPCTRL_EP_TYPE_CONTROL 0
+#define EPCTRL_EP_TYPE_ISO 1
+#define EPCTRL_EP_TYPE_BULK 2
+#define EPCTRL_EP_TYPE_INTERRUPT 3
+#define EPCTRL_TX_EP_TYPE_SHIFT 18
+#define EPCTRL_RX_EP_TYPE_SHIFT 2
+
+/* SNOOPn Register Bit Masks */
+#define SNOOP_ADDRESS_MASK 0xFFFFF000
+#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */
+#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */
+#define SNOOP_SIZE_8KB 0x0C
+#define SNOOP_SIZE_16KB 0x0D
+#define SNOOP_SIZE_32KB 0x0E
+#define SNOOP_SIZE_64KB 0x0F
+#define SNOOP_SIZE_128KB 0x10
+#define SNOOP_SIZE_256KB 0x11
+#define SNOOP_SIZE_512KB 0x12
+#define SNOOP_SIZE_1MB 0x13
+#define SNOOP_SIZE_2MB 0x14
+#define SNOOP_SIZE_4MB 0x15
+#define SNOOP_SIZE_8MB 0x16
+#define SNOOP_SIZE_16MB 0x17
+#define SNOOP_SIZE_32MB 0x18
+#define SNOOP_SIZE_64MB 0x19
+#define SNOOP_SIZE_128MB 0x1A
+#define SNOOP_SIZE_256MB 0x1B
+#define SNOOP_SIZE_512MB 0x1C
+#define SNOOP_SIZE_1GB 0x1D
+#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */
+
+/* pri_ctrl Register Bit Masks */
+#define PRI_CTRL_PRI_LVL1 0x0000000C
+#define PRI_CTRL_PRI_LVL0 0x00000003
+
+/* si_ctrl Register Bit Masks */
+#define SI_CTRL_ERR_DISABLE 0x00000010
+#define SI_CTRL_IDRC_DISABLE 0x00000008
+#define SI_CTRL_RD_SAFE_EN 0x00000004
+#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002
+#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001
+
+/* control Register Bit Masks */
+#define USB_CTRL_IOENB 0x00000004
+#define USB_CTRL_ULPI_INT0EN 0x00000001
+
+/* Endpoint Queue Head data struct
+ * Rem: all the variables of qh are LittleEndian Mode
+ * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr
+ */
+struct ep_queue_head {
+ u32 max_pkt_length; /* Mult(31-30) , Zlt(29) , Max Pkt len
+ and IOS(15) */
+ u32 curr_dtd_ptr; /* Current dTD Pointer(31-5) */
+ u32 next_dtd_ptr; /* Next dTD Pointer(31-5), T(0) */
+ u32 size_ioc_int_sts; /* Total bytes (30-16), IOC (15),
+ MultO(11-10), STS (7-0) */
+ u32 buff_ptr0; /* Buffer pointer Page 0 (31-12) */
+ u32 buff_ptr1; /* Buffer pointer Page 1 (31-12) */
+ u32 buff_ptr2; /* Buffer pointer Page 2 (31-12) */
+ u32 buff_ptr3; /* Buffer pointer Page 3 (31-12) */
+ u32 buff_ptr4; /* Buffer pointer Page 4 (31-12) */
+ u32 res1;
+ u8 setup_buffer[8]; /* Setup data 8 bytes */
+ u32 res2[4];
+};
+
+/* Endpoint Queue Head Bit Masks */
+#define EP_QUEUE_HEAD_MULT_POS 30
+#define EP_QUEUE_HEAD_ZLT_SEL 0x20000000
+#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS 16
+#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info) (((ep_info)>>16)&0x07ff)
+#define EP_QUEUE_HEAD_IOS 0x00008000
+#define EP_QUEUE_HEAD_NEXT_TERMINATE 0x00000001
+#define EP_QUEUE_HEAD_IOC 0x00008000
+#define EP_QUEUE_HEAD_MULTO 0x00000C00
+#define EP_QUEUE_HEAD_STATUS_HALT 0x00000040
+#define EP_QUEUE_HEAD_STATUS_ACTIVE 0x00000080
+#define EP_QUEUE_CURRENT_OFFSET_MASK 0x00000FFF
+#define EP_QUEUE_HEAD_NEXT_POINTER_MASK 0xFFFFFFE0
+#define EP_QUEUE_FRINDEX_MASK 0x000007FF
+#define EP_MAX_LENGTH_TRANSFER 0x4000
+
+/* Endpoint Transfer Descriptor data struct */
+/* Rem: all the variables of td are LittleEndian Mode */
+struct ep_td_struct {
+ u32 next_td_ptr; /* Next TD pointer(31-5), T(0) set
+ indicate invalid */
+ u32 size_ioc_sts; /* Total bytes (30-16), IOC (15),
+ MultO(11-10), STS (7-0) */
+ u32 buff_ptr0; /* Buffer pointer Page 0 */
+ u32 buff_ptr1; /* Buffer pointer Page 1 */
+ u32 buff_ptr2; /* Buffer pointer Page 2 */
+ u32 buff_ptr3; /* Buffer pointer Page 3 */
+ u32 buff_ptr4; /* Buffer pointer Page 4 */
+ u32 res;
+ /* 32 bytes */
+ dma_addr_t td_dma; /* dma address for this td */
+ /* virtual address of next td specified in next_td_ptr */
+ struct ep_td_struct *next_td_virt;
+};
+
+/* Endpoint Transfer Descriptor bit Masks */
+#define DTD_NEXT_TERMINATE 0x00000001
+#define DTD_IOC 0x00008000
+#define DTD_STATUS_ACTIVE 0x00000080
+#define DTD_STATUS_HALTED 0x00000040
+#define DTD_STATUS_DATA_BUFF_ERR 0x00000020
+#define DTD_STATUS_TRANSACTION_ERR 0x00000008
+#define DTD_RESERVED_FIELDS 0x80007300
+#define DTD_ADDR_MASK 0xFFFFFFE0
+#define DTD_PACKET_SIZE 0x7FFF0000
+#define DTD_LENGTH_BIT_POS 16
+#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \
+ DTD_STATUS_DATA_BUFF_ERR | \
+ DTD_STATUS_TRANSACTION_ERR)
+/* Alignment requirements; must be a power of two */
+#define DTD_ALIGNMENT 0x20
+#define QH_ALIGNMENT 2048
+
+/* Controller dma boundary */
+#define UDC_DMA_BOUNDARY 0x1000
+
+/* -----------------------------------------------------------------------*/
+/* ##### enum data
+*/
+typedef enum {
+ e_ULPI,
+ e_UTMI_8BIT,
+ e_UTMI_16BIT,
+ e_SERIAL
+} e_PhyInterface;
+
+/*-------------------------------------------------------------------------*/
+
+/* ### driver private data
+ */
+struct fsl_req {
+ struct usb_request req;
+ struct list_head queue;
+ /* ep_queue() func will add
+ a request->queue into a udc_ep->queue 'd tail */
+ struct fsl_ep *ep;
+ unsigned mapped:1;
+
+ struct ep_td_struct *head, *tail; /* For dTD List
+ cpu endian Virtual addr */
+ unsigned int dtd_count;
+};
+
+#define REQ_UNCOMPLETE 1
+
+struct fsl_ep {
+ struct usb_ep ep;
+ struct list_head queue;
+ struct fsl_udc *udc;
+ struct ep_queue_head *qh;
+ const struct usb_endpoint_descriptor *desc;
+ struct usb_gadget *gadget;
+
+ char name[14];
+ unsigned stopped:1;
+};
+
+#define EP_DIR_IN 1
+#define EP_DIR_OUT 0
+
+struct fsl_udc {
+
+ struct usb_gadget gadget;
+ struct usb_gadget_driver *driver;
+ struct fsl_ep *eps;
+ unsigned int max_ep;
+ unsigned int irq;
+
+ struct usb_ctrlrequest local_setup_buff;
+ spinlock_t lock;
+ struct otg_transceiver *transceiver;
+ unsigned softconnect:1;
+ unsigned vbus_active:1;
+ unsigned stopped:1;
+ unsigned remote_wakeup:1;
+
+ struct ep_queue_head *ep_qh; /* Endpoints Queue-Head */
+ struct fsl_req *status_req; /* ep0 status request */
+ struct dma_pool *td_pool; /* dma pool for DTD */
+ enum fsl_usb2_phy_modes phy_mode;
+
+ size_t ep_qh_size; /* size after alignment adjustment*/
+ dma_addr_t ep_qh_dma; /* dma address of QH */
+
+ u32 max_pipes; /* Device max pipes */
+ u32 max_use_endpts; /* Max endpointes to be used */
+ u32 bus_reset; /* Device is bus reseting */
+ u32 resume_state; /* USB state to resume */
+ u32 usb_state; /* USB current state */
+ u32 usb_next_state; /* USB next state */
+ u32 ep0_state; /* Endpoint zero state */
+ u32 ep0_dir; /* Endpoint zero direction: can be
+ USB_DIR_IN or USB_DIR_OUT */
+ u32 usb_sof_count; /* SOF count */
+ u32 errors; /* USB ERRORs count */
+ u8 device_address; /* Device USB address */
+
+ struct completion *done; /* to make sure release() is done */
+};
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \
+ __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...) do{}while(0)
+#endif
+
+#if 0
+static void dump_msg(const char *label, const u8 * buf, unsigned int length)
+{
+ unsigned int start, num, i;
+ char line[52], *p;
+
+ if (length >= 512)
+ return;
+ DBG("%s, length %u:\n", label, length);
+ start = 0;
+ while (length > 0) {
+ num = min(length, 16u);
+ p = line;
+ for (i = 0; i < num; ++i) {
+ if (i == 8)
+ *p++ = ' ';
+ sprintf(p, " %02x", buf[i]);
+ p += 3;
+ }
+ *p = 0;
+ printk(KERN_DEBUG "%6x: %s\n", start, line);
+ buf += num;
+ start += num;
+ length -= num;
+ }
+}
+#endif
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(stuff...) do{}while(0)
+#endif
+
+#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)
+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
+
+/*-------------------------------------------------------------------------*/
+
+/* ### Add board specific defines here
+ */
+
+/*
+ * ### pipe direction macro from device view
+ */
+#define USB_RECV 0 /* OUT EP */
+#define USB_SEND 1 /* IN EP */
+
+/*
+ * ### internal used help routines.
+ */
+#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF)
+#define ep_maxpacket(EP) ((EP)->ep.maxpacket)
+#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \
+ USB_DIR_IN ):((EP)->desc->bEndpointAddress \
+ & USB_DIR_IN)==USB_DIR_IN)
+#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \
+ &udc->eps[pipe])
+#define get_pipe_by_windex(windex) ((windex & USB_ENDPOINT_NUMBER_MASK) \
+ * 2 + ((windex & USB_DIR_IN) ? 1 : 0))
+#define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP))
+
+#endif
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 2e3d6620d216..d041b919e7b8 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -99,6 +99,12 @@
#define gadget_is_imx(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_FSL_USB2
+#define gadget_is_fsl_usb2(g) !strcmp("fsl-usb2-udc", (g)->name)
+#else
+#define gadget_is_fsl_usb2(g) 0
+#endif
+
/* Mentor high speed function controller */
#ifdef CONFIG_USB_GADGET_MUSBHSFC
#define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name)
@@ -177,5 +183,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
return 0x17;
else if (gadget_is_husb2dev(gadget))
return 0x18;
+ else if (gadget_is_fsl_usb2(gadget))
+ return 0x19;
return -ENOENT;
}
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index f01890dc8751..2c043a1ea156 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -71,7 +71,7 @@
* by the host to interact with this device, and allocates endpoints to
* the different protocol interfaces. The controller driver virtualizes
* usb hardware so that the gadget drivers will be more portable.
- *
+ *
* This UDC hardware wants to implement a bit too much USB protocol, so
* it constrains the sorts of USB configuration change events that work.
* The errata for these chips are misleading; some "fixed" bugs from
@@ -141,7 +141,7 @@ MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode");
#endif
/* ---------------------------------------------------------------------------
- * endpoint related parts of the api to the usb controller hardware,
+ * endpoint related parts of the api to the usb controller hardware,
* used by gadget driver; and the inner talker-to-hardware core.
* ---------------------------------------------------------------------------
*/
@@ -293,7 +293,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
#ifdef USE_DMA
/* for (some) bulk and ISO endpoints, try to get a DMA channel and
- * bind it to the endpoint. otherwise use PIO.
+ * bind it to the endpoint. otherwise use PIO.
*/
switch (ep->bmAttributes) {
case USB_ENDPOINT_XFER_ISOC:
@@ -304,7 +304,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep,
if (!use_dma || !ep->reg_drcmr)
break;
ep->dma = pxa_request_dma ((char *)_ep->name,
- (le16_to_cpu (desc->wMaxPacketSize) > 64)
+ (le16_to_cpu (desc->wMaxPacketSize) > 64)
? DMA_PRIO_MEDIUM /* some iso */
: DMA_PRIO_LOW,
dma_nodesc_handler, ep);
@@ -361,7 +361,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep)
*/
/*
- * pxa2xx_ep_alloc_request - allocate a request data structure
+ * pxa2xx_ep_alloc_request - allocate a request data structure
*/
static struct usb_request *
pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
@@ -378,7 +378,7 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags)
/*
- * pxa2xx_ep_free_request - deallocate a request data structure
+ * pxa2xx_ep_free_request - deallocate a request data structure
*/
static void
pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
@@ -1031,7 +1031,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
/*
- * nuke - dequeue ALL requests
+ * nuke - dequeue ALL requests
*/
static void nuke(struct pxa2xx_ep *ep, int status)
{
@@ -1136,16 +1136,16 @@ static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value)
ep->dev->req_pending = 0;
ep->dev->ep0state = EP0_STALL;
- /* and bulk/intr endpoints like dropping stalls too */
- } else {
- unsigned i;
- for (i = 0; i < 1000; i += 20) {
- if (*ep->reg_udccs & UDCCS_BI_SST)
- break;
- udelay(20);
- }
- }
- local_irq_restore(flags);
+ /* and bulk/intr endpoints like dropping stalls too */
+ } else {
+ unsigned i;
+ for (i = 0; i < 1000; i += 20) {
+ if (*ep->reg_udccs & UDCCS_BI_SST)
+ break;
+ udelay(20);
+ }
+ }
+ local_irq_restore(flags);
DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
return 0;
@@ -1216,7 +1216,7 @@ static struct usb_ep_ops pxa2xx_ep_ops = {
/* ---------------------------------------------------------------------------
- * device-scoped parts of the api to the usb controller hardware
+ * device-scoped parts of the api to the usb controller hardware
* ---------------------------------------------------------------------------
*/
@@ -1239,7 +1239,7 @@ static void udc_enable (struct pxa2xx_udc *);
static void udc_disable(struct pxa2xx_udc *);
/* We disable the UDC -- and its 48 MHz clock -- whenever it's not
- * in active use.
+ * in active use.
*/
static int pullup(struct pxa2xx_udc *udc, int is_active)
{
@@ -1464,24 +1464,10 @@ done:
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-/* "function" sysfs attribute */
-static ssize_t
-show_function (struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct pxa2xx_udc *dev = dev_get_drvdata (_dev);
-
- if (!dev->driver
- || !dev->driver->function
- || strlen (dev->driver->function) > PAGE_SIZE)
- return 0;
- return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
-}
-static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
-
/*-------------------------------------------------------------------------*/
/*
- * udc_disable - disable USB device controller
+ * udc_disable - disable USB device controller
*/
static void udc_disable(struct pxa2xx_udc *dev)
{
@@ -1507,7 +1493,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
/*
- * udc_reinit - initialize software state
+ * udc_reinit - initialize software state
*/
static void udc_reinit(struct pxa2xx_udc *dev)
{
@@ -1635,18 +1621,20 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
dev->gadget.dev.driver = &driver->driver;
dev->pullup = 1;
- device_add (&dev->gadget.dev);
+ retval = device_add (&dev->gadget.dev);
+ if (retval) {
+fail:
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ return retval;
+ }
retval = driver->bind(&dev->gadget);
if (retval) {
DMSG("bind to driver %s --> error %d\n",
driver->driver.name, retval);
device_del (&dev->gadget.dev);
-
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
+ goto fail;
}
- device_create_file(dev->dev, &dev_attr_function);
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
@@ -1704,7 +1692,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
dev->driver = NULL;
device_del (&dev->gadget.dev);
- device_remove_file(dev->dev, &dev_attr_function);
DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
dump_state(dev);
@@ -2474,12 +2461,12 @@ static struct pxa2xx_udc memory = {
#define IXP465_AD 0x00000200
/*
- * probe - binds to the platform device
+ * probe - binds to the platform device
*/
static int __init pxa2xx_udc_probe(struct platform_device *pdev)
{
struct pxa2xx_udc *dev = &memory;
- int retval, out_dma = 1, vbus_irq;
+ int retval, out_dma = 1, vbus_irq, irq;
u32 chiprev;
/* insist on Intel/ARM/XScale */
@@ -2522,7 +2509,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
return -ENODEV;
}
- pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB,
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENODEV;
+
+ pr_debug("%s: IRQ %d%s%s%s\n", driver_name, irq,
dev->has_cfr ? "" : " (!cfr)",
out_dma ? "" : " (broken dma-out)",
SIZE_STR DMASTR
@@ -2570,11 +2561,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
dev->vbus = is_vbus_present();
/* irq setup after old hardware state is cleaned up */
- retval = request_irq(IRQ_USB, pxa2xx_udc_irq,
+ retval = request_irq(irq, pxa2xx_udc_irq,
IRQF_DISABLED, driver_name, dev);
if (retval != 0) {
- printk(KERN_ERR "%s: can't get irq %i, err %d\n",
- driver_name, IRQ_USB, retval);
+ printk(KERN_ERR "%s: can't get irq %d, err %d\n",
+ driver_name, irq, retval);
return -EBUSY;
}
dev->got_irq = 1;
@@ -2589,7 +2580,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
lubbock_fail0:
- free_irq(IRQ_USB, dev);
+ free_irq(irq, dev);
return -EBUSY;
}
retval = request_irq(LUBBOCK_USB_IRQ,
@@ -2616,7 +2607,7 @@ lubbock_fail0:
if (retval != 0) {
printk(KERN_ERR "%s: can't get irq %i, err %d\n",
driver_name, vbus_irq, retval);
- free_irq(IRQ_USB, dev);
+ free_irq(irq, dev);
return -EBUSY;
}
}
@@ -2641,7 +2632,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
remove_proc_files();
if (dev->got_irq) {
- free_irq(IRQ_USB, dev);
+ free_irq(platform_get_irq(pdev, 0), dev);
dev->got_irq = 0;
}
#ifdef CONFIG_ARCH_LUBBOCK
@@ -2668,7 +2659,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
*
* For now, we punt and forcibly disconnect from the USB host when PXA
* enters any suspend state. While we're disconnected, we always disable
- * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
+ * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states.
* Boards without software pullup control shouldn't use those states.
* VBUS IRQs should probably be ignored so that the PXA device just acts
* "dead" to USB hosts until system resume.
@@ -2701,7 +2692,6 @@ static int pxa2xx_udc_resume(struct platform_device *dev)
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .probe = pxa2xx_udc_probe,
.shutdown = pxa2xx_udc_shutdown,
.remove = __exit_p(pxa2xx_udc_remove),
.suspend = pxa2xx_udc_suspend,
@@ -2715,7 +2705,7 @@ static struct platform_driver udc_driver = {
static int __init udc_init(void)
{
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
- return platform_driver_register(&udc_driver);
+ return platform_driver_probe(&udc_driver, pxa2xx_udc_probe);
}
module_init(udc_init);
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index 4c3c7259f019..397b149f3ca7 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -195,7 +195,7 @@ struct rndis_packet_msg_type
__le32 PerPacketInfoLength;
__le32 VcHandle;
__le32 Reserved;
-};
+} __attribute__ ((packed));
struct rndis_config_parameter
{
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a2e58c86849f..2ff396bd180f 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -15,4 +15,3 @@ obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o
obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
-obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index caac0d1967d0..f28736a917e4 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -31,7 +31,7 @@
#define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */
#define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */
#define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */
-#define FSL_SOC_USB_SICTRL 0x40c /* NOTE: big-endian */
-#define FSL_SOC_USB_PRICTRL 0x410 /* NOTE: big-endian */
+#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */
+#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */
#define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */
#endif /* _EHCI_FSL_H */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1813b7cac294..f4d301bc83b9 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -136,6 +136,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
/* restore CMD_RUN, framelist size, and irq threshold */
ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ /* Some controller/firmware combinations need a delay during which
+ * they set up the port statuses. See Bugzilla #8190. */
+ mdelay(8);
+
/* manually resume the ports we suspended during bus_suspend() */
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c
deleted file mode 100644
index 32f7caf24747..000000000000
--- a/drivers/usb/host/hc_crisv10.c
+++ /dev/null
@@ -1,4550 +0,0 @@
-/*
- * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD)
- *
- * Copyright (c) 2002, 2003 Axis Communications AB.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/unistd.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <asm/system.h>
-#include <asm/arch/svinto.h>
-
-#include <linux/usb.h>
-/* Ugly include because we don't live with the other host drivers. */
-#include <../drivers/usb/core/hcd.h>
-#include <../drivers/usb/core/usb.h>
-
-#include "hc_crisv10.h"
-
-#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
-#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
-#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
-
-static const char *usb_hcd_version = "$Revision: 1.2 $";
-
-#undef KERN_DEBUG
-#define KERN_DEBUG ""
-
-
-#undef USB_DEBUG_RH
-#undef USB_DEBUG_EPID
-#undef USB_DEBUG_SB
-#undef USB_DEBUG_DESC
-#undef USB_DEBUG_URB
-#undef USB_DEBUG_TRACE
-#undef USB_DEBUG_BULK
-#undef USB_DEBUG_CTRL
-#undef USB_DEBUG_INTR
-#undef USB_DEBUG_ISOC
-
-#ifdef USB_DEBUG_RH
-#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg)
-#else
-#define dbg_rh(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_EPID
-#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg)
-#else
-#define dbg_epid(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_SB
-#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg)
-#else
-#define dbg_sb(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_CTRL
-#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg)
-#else
-#define dbg_ctrl(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_BULK
-#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg)
-#else
-#define dbg_bulk(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_INTR
-#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg)
-#else
-#define dbg_intr(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_ISOC
-#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg)
-#else
-#define dbg_isoc(format, arg...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_TRACE
-#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
-#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
-#else
-#define DBFENTER do {} while (0)
-#define DBFEXIT do {} while (0)
-#endif
-
-#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
-
-/*-------------------------------------------------------------------
- Virtual Root Hub
- -------------------------------------------------------------------*/
-
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x00, /* __le16 bcdUSB; v1.0 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __le16 idVendor; */
- 0x00,
- 0x00, /* __le16 idProduct; */
- 0x00,
- 0x00, /* __le16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x02, /* __u8 iProduct; */
- 0x01, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __le16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static __u8 root_hub_hub_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
- 0x02, /* __u8 bNbrPorts; */
- 0x00, /* __u16 wHubCharacteristics; */
- 0x00,
- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
- 0x00, /* __u8 bHubContrCurrent; 0 mA */
- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0);
-static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0);
-
-/* We want the start timer to expire before the eot timer, because the former might start
- traffic, thus making it unnecessary for the latter to time out. */
-#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */
-#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */
-
-#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break
-#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
-{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-
-#define SLAB_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
-#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
-
-/* Most helpful debugging aid */
-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
-
-/* Alternative assert define which stops after a failed assert. */
-/*
-#define assert(expr) \
-{ \
- if (!(expr)) { \
- err("assert failed at line %d",__LINE__); \
- while (1); \
- } \
-}
-*/
-
-
-/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically?
- To adjust it dynamically we would have to get an interrupt when we reach the end
- of the rx descriptor list, or when we get close to the end, and then allocate more
- descriptors. */
-
-#define NBR_OF_RX_DESC 512
-#define RX_DESC_BUF_SIZE 1024
-#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
-
-/* The number of epids is, among other things, used for pre-allocating
- ctrl, bulk and isoc EP descriptors (one for each epid).
- Assumed to be > 1 when initiating the DMA lists. */
-#define NBR_OF_EPIDS 32
-
-/* Support interrupt traffic intervals up to 128 ms. */
-#define MAX_INTR_INTERVAL 128
-
-/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table
- must be "invalid". By this we mean that we shouldn't care about epid attentions
- for this epid, or at least handle them differently from epid attentions for "valid"
- epids. This define determines which one to use (don't change it). */
-#define INVALID_EPID 31
-/* A special epid for the bulk dummys. */
-#define DUMMY_EPID 30
-
-/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */
-static __u32 epid_usage_bitmask;
-
-/* A bitfield to keep information on in/out traffic is needed to uniquely identify
- an endpoint on a device, since the most significant bit which indicates traffic
- direction is lacking in the ep_id field (ETRAX epids can handle both in and
- out traffic on endpoints that are otherwise identical). The USB framework, however,
- relies on them to be handled separately. For example, bulk IN and OUT urbs cannot
- be queued in the same list, since they would block each other. */
-static __u32 epid_out_traffic;
-
-/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
- Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */
-static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
-static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
-
-/* Pointers into RxDescList. */
-static volatile USB_IN_Desc_t *myNextRxDesc;
-static volatile USB_IN_Desc_t *myLastRxDesc;
-static volatile USB_IN_Desc_t *myPrevRxDesc;
-
-/* EP descriptors must be 32-bit aligned. */
-static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set,
- causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
- gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
- EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
- in each frame. */
-static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
-
-static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4)));
-
-static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
-static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4)));
-
-/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting
- this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0
- results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point
- it to this buffer. */
-static int zout_buffer[4] __attribute__ ((aligned (4)));
-
-/* Cache for allocating new EP and SB descriptors. */
-static struct kmem_cache *usb_desc_cache;
-
-/* Cache for the registers allocated in the top half. */
-static struct kmem_cache *top_half_reg_cache;
-
-/* Cache for the data allocated in the isoc descr top half. */
-static struct kmem_cache *isoc_compl_cache;
-
-static struct usb_bus *etrax_usb_bus;
-
-/* This is a circular (double-linked) list of the active urbs for each epid.
- The head is never removed, and new urbs are linked onto the list as
- urb_entry_t elements. Don't reference urb_list directly; use the wrapper
- functions instead. Note that working with these lists might require spinlock
- protection. */
-static struct list_head urb_list[NBR_OF_EPIDS];
-
-/* Read about the need and usage of this lock in submit_ctrl_urb. */
-static spinlock_t urb_list_lock;
-
-/* Used when unlinking asynchronously. */
-static struct list_head urb_unlink_list;
-
-/* for returning string descriptors in UTF-16LE */
-static int ascii2utf (char *ascii, __u8 *utf, int utfmax)
-{
- int retval;
-
- for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) {
- *utf++ = *ascii++ & 0x7f;
- *utf++ = 0;
- }
- return retval;
-}
-
-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
-{
- char buf [30];
-
- // assert (len > (2 * (sizeof (buf) + 1)));
- // assert (strlen (type) <= 8);
-
- // language ids
- if (id == 0) {
- *data++ = 4; *data++ = 3; /* 4 bytes data */
- *data++ = 0; *data++ = 0; /* some language id */
- return 4;
-
- // serial number
- } else if (id == 1) {
- sprintf (buf, "%x", serial);
-
- // product description
- } else if (id == 2) {
- sprintf (buf, "USB %s Root Hub", type);
-
- // id 3 == vendor description
-
- // unsupported IDs --> "stall"
- } else
- return 0;
-
- data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
- data [1] = 3;
- return data [0];
-}
-
-/* Wrappers around the list functions (include/linux/list.h). */
-
-static inline int urb_list_empty(int epid)
-{
- return list_empty(&urb_list[epid]);
-}
-
-/* Returns first urb for this epid, or NULL if list is empty. */
-static inline struct urb *urb_list_first(int epid)
-{
- struct urb *first_urb = 0;
-
- if (!urb_list_empty(epid)) {
- /* Get the first urb (i.e. head->next). */
- urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
- first_urb = urb_entry->urb;
- }
- return first_urb;
-}
-
-/* Adds an urb_entry last in the list for this epid. */
-static inline void urb_list_add(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
- assert(urb_entry);
-
- urb_entry->urb = urb;
- list_add_tail(&urb_entry->list, &urb_list[epid]);
-}
-
-/* Search through the list for an element that contains this urb. (The list
- is expected to be short and the one we are about to delete will often be
- the first in the list.) */
-static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid)
-{
- struct list_head *entry;
- struct list_head *tmp;
- urb_entry_t *urb_entry;
-
- list_for_each_safe(entry, tmp, &urb_list[epid]) {
- urb_entry = list_entry(entry, urb_entry_t, list);
- assert(urb_entry);
- assert(urb_entry->urb);
-
- if (urb_entry->urb == urb) {
- return urb_entry;
- }
- }
- return 0;
-}
-
-/* Delete an urb from the list. */
-static inline void urb_list_del(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
- assert(urb_entry);
-
- /* Delete entry and free. */
- list_del(&urb_entry->list);
- kfree(urb_entry);
-}
-
-/* Move an urb to the end of the list. */
-static inline void urb_list_move_last(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
- assert(urb_entry);
-
- list_move_tail(&urb_entry->list, &urb_list[epid]);
-}
-
-/* Get the next urb in the list. */
-static inline struct urb *urb_list_next(struct urb *urb, int epid)
-{
- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
-
- assert(urb_entry);
-
- if (urb_entry->list.next != &urb_list[epid]) {
- struct list_head *elem = urb_entry->list.next;
- urb_entry = list_entry(elem, urb_entry_t, list);
- return urb_entry->urb;
- } else {
- return NULL;
- }
-}
-
-
-
-/* For debug purposes only. */
-static inline void urb_list_dump(int epid)
-{
- struct list_head *entry;
- struct list_head *tmp;
- urb_entry_t *urb_entry;
- int i = 0;
-
- info("Dumping urb list for epid %d", epid);
-
- list_for_each_safe(entry, tmp, &urb_list[epid]) {
- urb_entry = list_entry(entry, urb_entry_t, list);
- info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb);
- }
-}
-
-static void init_rx_buffers(void);
-static int etrax_rh_unlink_urb(struct urb *urb);
-static void etrax_rh_send_irq(struct urb *urb);
-static void etrax_rh_init_int_timer(struct urb *urb);
-static void etrax_rh_int_timer_do(unsigned long ptr);
-
-static int etrax_usb_setup_epid(struct urb *urb);
-static int etrax_usb_lookup_epid(struct urb *urb);
-static int etrax_usb_allocate_epid(void);
-static void etrax_usb_free_epid(int epid);
-
-static int etrax_remove_from_sb_list(struct urb *urb);
-
-static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
- unsigned mem_flags, dma_addr_t *dma);
-static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
-
-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid);
-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid);
-
-static int etrax_usb_submit_bulk_urb(struct urb *urb);
-static int etrax_usb_submit_ctrl_urb(struct urb *urb);
-static int etrax_usb_submit_intr_urb(struct urb *urb);
-static int etrax_usb_submit_isoc_urb(struct urb *urb);
-
-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags);
-static int etrax_usb_unlink_urb(struct urb *urb, int status);
-static int etrax_usb_get_frame_number(struct usb_device *usb_dev);
-
-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc);
-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc);
-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc);
-static void etrax_usb_hc_interrupt_bottom_half(void *data);
-
-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data);
-
-
-/* The following is a list of interrupt handlers for the host controller interrupts we use.
- They are called from etrax_usb_hc_interrupt_bottom_half. */
-static void etrax_usb_hc_isoc_eof_interrupt(void);
-static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced);
-static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg);
-static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg);
-static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg);
-
-static int etrax_rh_submit_urb (struct urb *urb);
-
-/* Forward declaration needed because they are used in the rx interrupt routine. */
-static void etrax_usb_complete_urb(struct urb *urb, int status);
-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status);
-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status);
-static void etrax_usb_complete_intr_urb(struct urb *urb, int status);
-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status);
-
-static int etrax_usb_hc_init(void);
-static void etrax_usb_hc_cleanup(void);
-
-static struct usb_operations etrax_usb_device_operations =
-{
- .get_frame_number = etrax_usb_get_frame_number,
- .submit_urb = etrax_usb_submit_urb,
- .unlink_urb = etrax_usb_unlink_urb,
- .buffer_alloc = etrax_usb_buffer_alloc,
- .buffer_free = etrax_usb_buffer_free
-};
-
-/* Note that these functions are always available in their "__" variants, for use in
- error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/
- USB_DEBUG_URB macros. */
-static void __dump_urb(struct urb* purb)
-{
- printk("\nurb :0x%08lx\n", (unsigned long)purb);
- printk("dev :0x%08lx\n", (unsigned long)purb->dev);
- printk("pipe :0x%08x\n", purb->pipe);
- printk("status :%d\n", purb->status);
- printk("transfer_flags :0x%08x\n", purb->transfer_flags);
- printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
- printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
- printk("actual_length :%d\n", purb->actual_length);
- printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
- printk("start_frame :%d\n", purb->start_frame);
- printk("number_of_packets :%d\n", purb->number_of_packets);
- printk("interval :%d\n", purb->interval);
- printk("error_count :%d\n", purb->error_count);
- printk("context :0x%08lx\n", (unsigned long)purb->context);
- printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
-}
-
-static void __dump_in_desc(volatile USB_IN_Desc_t *in)
-{
- printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
- printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
- printk(" command : 0x%04x\n", in->command);
- printk(" next : 0x%08lx\n", in->next);
- printk(" buf : 0x%08lx\n", in->buf);
- printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
- printk(" status : 0x%04x\n\n", in->status);
-}
-
-static void __dump_sb_desc(volatile USB_SB_Desc_t *sb)
-{
- char tt = (sb->command & 0x30) >> 4;
- char *tt_string;
-
- switch (tt) {
- case 0:
- tt_string = "zout";
- break;
- case 1:
- tt_string = "in";
- break;
- case 2:
- tt_string = "out";
- break;
- case 3:
- tt_string = "setup";
- break;
- default:
- tt_string = "unknown (weird)";
- }
-
- printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb);
- printk(" command : 0x%04x\n", sb->command);
- printk(" rem : %d\n", (sb->command & 0x3f00) >> 8);
- printk(" full : %d\n", (sb->command & 0x40) >> 6);
- printk(" tt : %d (%s)\n", tt, tt_string);
- printk(" intr : %d\n", (sb->command & 0x8) >> 3);
- printk(" eot : %d\n", (sb->command & 0x2) >> 1);
- printk(" eol : %d\n", sb->command & 0x1);
- printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len);
- printk(" next : 0x%08lx\n", sb->next);
- printk(" buf : 0x%08lx\n\n", sb->buf);
-}
-
-
-static void __dump_ep_desc(volatile USB_EP_Desc_t *ep)
-{
- printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep);
- printk(" command : 0x%04x\n", ep->command);
- printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8);
- printk(" enable : %d\n", (ep->command & 0x10) >> 4);
- printk(" intr : %d\n", (ep->command & 0x8) >> 3);
- printk(" eof : %d\n", (ep->command & 0x2) >> 1);
- printk(" eol : %d\n", ep->command & 0x1);
- printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len);
- printk(" next : 0x%08lx\n", ep->next);
- printk(" sub : 0x%08lx\n\n", ep->sub);
-}
-
-static inline void __dump_ep_list(int pipe_type)
-{
- volatile USB_EP_Desc_t *ep;
- volatile USB_EP_Desc_t *first_ep;
- volatile USB_SB_Desc_t *sb;
-
- switch (pipe_type)
- {
- case PIPE_BULK:
- first_ep = &TxBulkEPList[0];
- break;
- case PIPE_CONTROL:
- first_ep = &TxCtrlEPList[0];
- break;
- case PIPE_INTERRUPT:
- first_ep = &TxIntrEPList[0];
- break;
- case PIPE_ISOCHRONOUS:
- first_ep = &TxIsocEPList[0];
- break;
- default:
- warn("Cannot dump unknown traffic type");
- return;
- }
- ep = first_ep;
-
- printk("\n\nDumping EP list...\n\n");
-
- do {
- __dump_ep_desc(ep);
- /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
- sb = ep->sub ? phys_to_virt(ep->sub) : 0;
- while (sb) {
- __dump_sb_desc(sb);
- sb = sb->next ? phys_to_virt(sb->next) : 0;
- }
- ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next));
-
- } while (ep != first_ep);
-}
-
-static inline void __dump_ept_data(int epid)
-{
- unsigned long flags;
- __u32 r_usb_ept_data;
-
- if (epid < 0 || epid > 31) {
- printk("Cannot dump ept data for invalid epid %d\n", epid);
- return;
- }
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
- if (r_usb_ept_data == 0) {
- /* No need for more detailed printing. */
- return;
- }
- printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
- printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
- printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
- printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
- printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
- printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
- printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
- printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
- printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
- printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
- printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
- printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
-}
-
-static inline void __dump_ept_data_list(void)
-{
- int i;
-
- printk("Dumping the whole R_USB_EPT_DATA list\n");
-
- for (i = 0; i < 32; i++) {
- __dump_ept_data(i);
- }
-}
-#ifdef USB_DEBUG_DESC
-#define dump_in_desc(...) __dump_in_desc(...)
-#define dump_sb_desc(...) __dump_sb_desc(...)
-#define dump_ep_desc(...) __dump_ep_desc(...)
-#else
-#define dump_in_desc(...) do {} while (0)
-#define dump_sb_desc(...) do {} while (0)
-#define dump_ep_desc(...) do {} while (0)
-#endif
-
-#ifdef USB_DEBUG_URB
-#define dump_urb(x) __dump_urb(x)
-#else
-#define dump_urb(x) do {} while (0)
-#endif
-
-static void init_rx_buffers(void)
-{
- int i;
-
- DBFENTER;
-
- for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
- RxDescList[i].command = 0;
- RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
- RxDescList[i].hw_len = 0;
- RxDescList[i].status = 0;
-
- /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc
- for the relevant fields.) */
- prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
-
- }
-
- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
- RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
- RxDescList[i].next = virt_to_phys(&RxDescList[0]);
- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
- RxDescList[i].hw_len = 0;
- RxDescList[i].status = 0;
-
- myNextRxDesc = &RxDescList[0];
- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-
- *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
- *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void init_tx_bulk_ep(void)
-{
- int i;
-
- DBFENTER;
-
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxBulkEPList[i]);
- TxBulkEPList[i].hw_len = 0;
- TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxBulkEPList[i].sub = 0;
- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]);
-
- /* Initiate two EPs, disabled and with the eol flag set. No need for any
- preserved epid. */
-
- /* The first one has the intr flag set so we get an interrupt when the DMA
- channel is about to become disabled. */
- CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
- TxBulkDummyEPList[i][0].hw_len = 0;
- TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_STATE(USB_EP_command, intr, yes));
- TxBulkDummyEPList[i][0].sub = 0;
- TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
-
- /* The second one. */
- CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
- TxBulkDummyEPList[i][1].hw_len = 0;
- TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
- IO_STATE(USB_EP_command, eol, yes));
- TxBulkDummyEPList[i][1].sub = 0;
- /* The last dummy's next pointer is the same as the current EP's next pointer. */
- TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
- }
-
- /* Configure the last one. */
- CHECK_ALIGN(&TxBulkEPList[i]);
- TxBulkEPList[i].hw_len = 0;
- TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, i));
- TxBulkEPList[i].sub = 0;
- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]);
-
- /* No need configuring dummy EPs for the last one as it will never be used for
- bulk traffic (i == INVALD_EPID at this point). */
-
- /* Set up to start on the last EP so we will enable it when inserting traffic
- for the first time (imitating the situation where the DMA has stopped
- because there was no more traffic). */
- *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
- /* No point in starting the bulk channel yet.
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
- DBFEXIT;
-}
-
-static void init_tx_ctrl_ep(void)
-{
- int i;
-
- DBFENTER;
-
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxCtrlEPList[i]);
- TxCtrlEPList[i].hw_len = 0;
- TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxCtrlEPList[i].sub = 0;
- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]);
- }
-
- CHECK_ALIGN(&TxCtrlEPList[i]);
- TxCtrlEPList[i].hw_len = 0;
- TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, i));
-
- TxCtrlEPList[i].sub = 0;
- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]);
-
- *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]);
- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-
-static void init_tx_intr_ep(void)
-{
- int i;
-
- DBFENTER;
-
- /* Read comment at zout_buffer declaration for an explanation to this. */
- TxIntrSB_zout.sw_len = 1;
- TxIntrSB_zout.next = 0;
- TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
- TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
- CHECK_ALIGN(&TxIntrEPList[i]);
- TxIntrEPList[i].hw_len = 0;
- TxIntrEPList[i].command =
- (IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, enable, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
- }
-
- CHECK_ALIGN(&TxIntrEPList[i]);
- TxIntrEPList[i].hw_len = 0;
- TxIntrEPList[i].command =
- (IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_STATE(USB_EP_command, enable, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
-
- *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
- DBFEXIT;
-}
-
-static void init_tx_isoc_ep(void)
-{
- int i;
-
- DBFENTER;
-
- /* Read comment at zout_buffer declaration for an explanation to this. */
- TxIsocSB_zout.sw_len = 1;
- TxIsocSB_zout.next = 0;
- TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
- TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- /* The last isochronous EP descriptor is a dummy. */
-
- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
- CHECK_ALIGN(&TxIsocEPList[i]);
- TxIsocEPList[i].hw_len = 0;
- TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
- TxIsocEPList[i].sub = 0;
- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
- }
-
- CHECK_ALIGN(&TxIsocEPList[i]);
- TxIsocEPList[i].hw_len = 0;
-
- /* Must enable the last EP descr to get eof interrupt. */
- TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
- IO_STATE(USB_EP_command, eof, yes) |
- IO_STATE(USB_EP_command, eol, yes) |
- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
- TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
-
- *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_unlink_intr_urb(struct urb *urb)
-{
- volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */
- volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */
- volatile USB_EP_Desc_t *next_ep; /* The EP after current. */
- volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */
-
- int epid;
-
- /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */
-
- DBFENTER;
-
- epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid;
-
- first_ep = &TxIntrEPList[0];
- curr_ep = first_ep;
-
-
- /* Note that this loop removes all EP descriptors with this epid. This assumes
- that all EP descriptors belong to the one and only urb for this epid. */
-
- do {
- next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next);
-
- if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-
- dbg_intr("Found EP to unlink for epid %d", epid);
-
- /* This is the one we should unlink. */
- unlink_ep = next_ep;
-
- /* Actually unlink the EP from the DMA list. */
- curr_ep->next = unlink_ep->next;
-
- /* Wait until the DMA is no longer at this descriptor. */
- while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep));
-
- /* Now we are free to remove it and its SB descriptor.
- Note that it is assumed here that there is only one sb in the
- sb list for this ep. */
- kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub));
- kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep);
- }
-
- curr_ep = phys_to_virt(curr_ep->next);
-
- } while (curr_ep != first_ep);
- urb->hcpriv = NULL;
-}
-
-void etrax_usb_do_intr_recover(int epid)
-{
- USB_EP_Desc_t *first_ep, *tmp_ep;
-
- DBFENTER;
-
- first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP);
- tmp_ep = first_ep;
-
- /* What this does is simply to walk the list of interrupt
- ep descriptors and enable those that are disabled. */
-
- do {
- if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid &&
- !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) {
- tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes);
- }
-
- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
-
- } while (tmp_ep != first_ep);
-
-
- DBFEXIT;
-}
-
-static int etrax_rh_unlink_urb (struct urb *urb)
-{
- etrax_hc_t *hc;
-
- DBFENTER;
-
- hc = urb->dev->bus->hcpriv;
-
- if (hc->rh.urb == urb) {
- hc->rh.send = 0;
- del_timer(&hc->rh.rh_int_timer);
- }
-
- DBFEXIT;
- return 0;
-}
-
-static void etrax_rh_send_irq(struct urb *urb)
-{
- __u16 data = 0;
- etrax_hc_t *hc = urb->dev->bus->hcpriv;
- DBFENTER;
-
-/*
- dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER);
- dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING);
-*/
-
- data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0;
- data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0;
-
- *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data);
- /* FIXME: Why is actual_length set to 1 when data is 2 bytes?
- Since only 1 byte is used, why not declare data as __u8? */
- urb->actual_length = 1;
- urb->status = 0;
-
- if (hc->rh.send && urb->complete) {
- dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1);
- dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2);
-
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
-}
-
-static void etrax_rh_init_int_timer(struct urb *urb)
-{
- etrax_hc_t *hc;
-
- DBFENTER;
-
- hc = urb->dev->bus->hcpriv;
- hc->rh.interval = urb->interval;
- init_timer(&hc->rh.rh_int_timer);
- hc->rh.rh_int_timer.function = etrax_rh_int_timer_do;
- hc->rh.rh_int_timer.data = (unsigned long)urb;
- /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped
- to 0, and the rest to the nearest lower 10 ms. */
- hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000);
- add_timer(&hc->rh.rh_int_timer);
-
- DBFEXIT;
-}
-
-static void etrax_rh_int_timer_do(unsigned long ptr)
-{
- struct urb *urb;
- etrax_hc_t *hc;
-
- DBFENTER;
-
- urb = (struct urb*)ptr;
- hc = urb->dev->bus->hcpriv;
-
- if (hc->rh.send) {
- etrax_rh_send_irq(urb);
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_setup_epid(struct urb *urb)
-{
- int epid;
- char devnum, endpoint, out_traffic, slow;
- int maxlen;
- unsigned long flags;
-
- DBFENTER;
-
- epid = etrax_usb_lookup_epid(urb);
- if ((epid != -1)){
- /* An epid that fits this urb has been found. */
- DBFEXIT;
- return epid;
- }
-
- /* We must find and initiate a new epid for this urb. */
- epid = etrax_usb_allocate_epid();
-
- if (epid == -1) {
- /* Failed to allocate a new epid. */
- DBFEXIT;
- return epid;
- }
-
- /* We now have a new epid to use. Initiate it. */
- set_bit(epid, (void *)&epid_usage_bitmask);
-
- devnum = usb_pipedevice(urb->pipe);
- endpoint = usb_pipeendpoint(urb->pipe);
- slow = usb_pipeslow(urb->pipe);
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
- out_traffic = 1;
- } else {
- out_traffic = usb_pipeout(urb->pipe);
- }
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
- /* FIXME: Change any to the actual port? */
- IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
- IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
- IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
- IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
- } else {
- *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) |
- IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
- /* FIXME: Change any to the actual port? */
- IO_STATE(R_USB_EPT_DATA, port, any) |
- IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
- IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
- IO_FIELD(R_USB_EPT_DATA, dev, devnum);
- }
-
- restore_flags(flags);
-
- if (out_traffic) {
- set_bit(epid, (void *)&epid_out_traffic);
- } else {
- clear_bit(epid, (void *)&epid_out_traffic);
- }
-
- dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)",
- epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN");
-
- DBFEXIT;
- return epid;
-}
-
-static void etrax_usb_free_epid(int epid)
-{
- unsigned long flags;
-
- DBFENTER;
-
- if (!test_bit(epid, (void *)&epid_usage_bitmask)) {
- warn("Trying to free unused epid %d", epid);
- DBFEXIT;
- return;
- }
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold));
- /* This will, among other things, set the valid field to 0. */
- *R_USB_EPT_DATA = 0;
- restore_flags(flags);
-
- clear_bit(epid, (void *)&epid_usage_bitmask);
-
-
- dbg_epid("Freed epid %d", epid);
-
- DBFEXIT;
-}
-
-static int etrax_usb_lookup_epid(struct urb *urb)
-{
- int i;
- __u32 data;
- char devnum, endpoint, slow, out_traffic;
- int maxlen;
- unsigned long flags;
-
- DBFENTER;
-
- devnum = usb_pipedevice(urb->pipe);
- endpoint = usb_pipeendpoint(urb->pipe);
- slow = usb_pipeslow(urb->pipe);
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
- out_traffic = 1;
- } else {
- out_traffic = usb_pipeout(urb->pipe);
- }
-
- /* Step through att epids. */
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- if (test_bit(i, (void *)&epid_usage_bitmask) &&
- test_bit(i, (void *)&epid_out_traffic) == out_traffic) {
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i);
- nop();
-
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- data = *R_USB_EPT_DATA_ISO;
- restore_flags(flags);
-
- if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) {
- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
- DBFEXIT;
- return i;
- }
- } else {
- data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- if ((IO_MASK(R_USB_EPT_DATA, valid) & data) &&
- (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) &&
- (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) &&
- (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) &&
- (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) {
- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
- DBFEXIT;
- return i;
- }
- }
- }
- }
-
- DBFEXIT;
- return -1;
-}
-
-static int etrax_usb_allocate_epid(void)
-{
- int i;
-
- DBFENTER;
-
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- if (!test_bit(i, (void *)&epid_usage_bitmask)) {
- dbg_epid("Found free epid %d", i);
- DBFEXIT;
- return i;
- }
- }
-
- dbg_epid("Found no free epids");
- DBFEXIT;
- return -1;
-}
-
-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags)
-{
- etrax_hc_t *hc;
- int ret = -EINVAL;
-
- DBFENTER;
-
- if (!urb->dev || !urb->dev->bus) {
- return -ENODEV;
- }
- if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) {
- info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe);
- return -EMSGSIZE;
- }
-
- if (urb->timeout) {
- /* FIXME. */
- warn("urb->timeout specified, ignoring.");
- }
-
- hc = (etrax_hc_t*)urb->dev->bus->hcpriv;
-
- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
- /* This request is for the Virtual Root Hub. */
- ret = etrax_rh_submit_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- ret = etrax_usb_submit_bulk_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- ret = etrax_usb_submit_ctrl_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
- int bustime;
-
- if (urb->bandwidth == 0) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- } else {
- ret = etrax_usb_submit_intr_urb(urb);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else {
- /* Bandwidth already set. */
- ret = etrax_usb_submit_intr_urb(urb);
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- int bustime;
-
- if (urb->bandwidth == 0) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- } else {
- ret = etrax_usb_submit_isoc_urb(urb);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else {
- /* Bandwidth already set. */
- ret = etrax_usb_submit_isoc_urb(urb);
- }
- }
-
- DBFEXIT;
-
- if (ret != 0)
- printk("Submit URB error %d\n", ret);
-
- return ret;
-}
-
-static int etrax_usb_unlink_urb(struct urb *urb, int status)
-{
- etrax_hc_t *hc;
- etrax_urb_priv_t *urb_priv;
- int epid;
- unsigned int flags;
-
- DBFENTER;
-
- if (!urb) {
- return -EINVAL;
- }
-
- /* Disable interrupts here since a descriptor interrupt for the isoc epid
- will modify the sb list. This could possibly be done more granular, but
- unlink_urb should not be used frequently anyway.
- */
-
- save_flags(flags);
- cli();
-
- if (!urb->dev || !urb->dev->bus) {
- restore_flags(flags);
- return -ENODEV;
- }
- if (!urb->hcpriv) {
- /* This happens if a device driver calls unlink on an urb that
- was never submitted (lazy driver) or if the urb was completed
- while unlink was being called. */
- restore_flags(flags);
- return 0;
- }
- if (urb->transfer_flags & URB_ASYNC_UNLINK) {
- /* FIXME. */
- /* If URB_ASYNC_UNLINK is set:
- unlink
- move to a separate urb list
- call complete at next sof with ECONNRESET
-
- If not:
- wait 1 ms
- unlink
- call complete with ENOENT
- */
- warn("URB_ASYNC_UNLINK set, ignoring.");
- }
-
- /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking,
- but that doesn't work for interrupt and isochronous traffic since they are completed
- repeatedly, and urb->status is set then. That may in itself be a bug though. */
-
- hc = urb->dev->bus->hcpriv;
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- epid = urb_priv->epid;
-
- /* Set the urb status (synchronous unlink). */
- urb->status = -ENOENT;
- urb_priv->urb_state = UNLINK;
-
- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
- int ret;
- ret = etrax_rh_unlink_urb(urb);
- DBFEXIT;
- restore_flags(flags);
- return ret;
-
- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb);
-
- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid]));
- }
- /* Kicking dummy list out of the party. */
- TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb);
-
- if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid]));
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
-
- dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb);
-
- /* Separate function because it's a tad more complicated. */
- etrax_usb_unlink_intr_urb(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb);
-
- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
- }
- }
-
- /* Note that we need to remove the urb from the urb list *before* removing its SB
- descriptors. (This means that the isoc eof handler might get a null urb when we
- are unlinking the last urb.) */
-
- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-
- urb_list_del(urb, epid);
- TxBulkEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-
- urb_list_del(urb, epid);
- TxCtrlEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
-
- urb_list_del(urb, epid);
- /* Sanity check (should never happen). */
- assert(urb_list_empty(epid));
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- if (usb_pipeout(urb->pipe)) {
-
- USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb;
-
- if (__urb_list_entry(urb, epid)) {
-
- urb_list_del(urb, epid);
- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
- prev_sb = 0;
- while (iter_sb && (iter_sb != urb_priv->first_sb)) {
- prev_sb = iter_sb;
- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- }
-
- if (iter_sb == 0) {
- /* Unlink of the URB currently being transmitted. */
- prev_sb = 0;
- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
- }
-
- while (iter_sb && (iter_sb != urb_priv->last_sb)) {
- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- }
- if (iter_sb) {
- next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
- } else {
- /* This should only happen if the DMA has completed
- processing the SB list for this EP while interrupts
- are disabled. */
- dbg_isoc("Isoc urb not found, already sent?");
- next_sb = 0;
- }
- if (prev_sb) {
- prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
- } else {
- TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
- }
-
- etrax_remove_from_sb_list(urb);
- if (urb_list_empty(epid)) {
- TxIsocEPList[epid].sub = 0;
- dbg_isoc("Last isoc out urb epid %d", epid);
- } else if (next_sb || prev_sb) {
- dbg_isoc("Re-enable isoc out epid %d", epid);
-
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- } else {
- TxIsocEPList[epid].sub = 0;
- dbg_isoc("URB list non-empty and no SB list, EP disabled");
- }
- } else {
- dbg_isoc("Urb 0x%p not found, completed already?", urb);
- }
- } else {
-
- urb_list_del(urb, epid);
-
- /* For in traffic there is only one SB descriptor for each EP even
- though there may be several urbs (all urbs point at the same SB). */
- if (urb_list_empty(epid)) {
- /* No more urbs, remove the SB. */
- TxIsocEPList[epid].sub = 0;
- etrax_remove_from_sb_list(urb);
- } else {
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- }
- }
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 1);
- }
- /* Free the epid if urb list is empty. */
- if (urb_list_empty(epid)) {
- etrax_usb_free_epid(epid);
- }
- restore_flags(flags);
-
- /* Must be done before calling completion handler. */
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
- return 0;
-}
-
-static int etrax_usb_get_frame_number(struct usb_device *usb_dev)
-{
- DBFENTER;
- DBFEXIT;
- return (*R_USB_FM_NUMBER & 0x7ff);
-}
-
-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc)
-{
- DBFENTER;
-
- /* This interrupt handler could be used when unlinking EP descriptors. */
-
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
- USB_EP_Desc_t *ep;
-
- //dbg_bulk("dma8_sub0_descr (BULK) intr.");
-
- /* It should be safe clearing the interrupt here, since we don't expect to get a new
- one until we restart the bulk channel. */
- *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
-
- /* Wait while the DMA is running (though we don't expect it to be). */
- while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd));
-
- /* Advance the DMA to the next EP descriptor. */
- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
-
- //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep);
-
- /* ep->next is already a physical address; no need for a virt_to_phys. */
- *R_DMA_CH8_SUB0_EP = ep->next;
-
- /* Start the DMA bulk channel again. */
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
- struct urb *urb;
- int epid;
- etrax_urb_priv_t *urb_priv;
- unsigned long int flags;
-
- dbg_ctrl("dma8_sub1_descr (CTRL) intr.");
- *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
-
- /* The complete callback gets called so we cli. */
- save_flags(flags);
- cli();
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- if ((TxCtrlEPList[epid].sub == 0) ||
- (epid == DUMMY_EPID) ||
- (epid == INVALID_EPID)) {
- /* Nothing here to see. */
- continue;
- }
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
-
- if (urb) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_CONTROL);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) {
- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
-
- etrax_usb_complete_urb(urb, 0);
- }
- }
- }
- restore_flags(flags);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
- dbg_intr("dma8_sub2_descr (INTR) intr.");
- *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
- }
- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
- struct urb *urb;
- int epid;
- int epid_done;
- etrax_urb_priv_t *urb_priv;
- USB_SB_Desc_t *sb_desc;
-
- usb_isoc_complete_data_t *comp_data = NULL;
-
- /* One or more isoc out transfers are done. */
- dbg_isoc("dma8_sub3_descr (ISOC) intr.");
-
- /* For each isoc out EP search for the first sb_desc with the intr flag
- set. This descriptor must be the last packet from an URB. Then
- traverse the URB list for the EP until the URB with urb_priv->last_sb
- matching the intr-marked sb_desc is found. All URBs before this have
- been sent.
- */
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- /* Skip past epids with no SB lists, epids used for in traffic,
- and special (dummy, invalid) epids. */
- if ((TxIsocEPList[epid].sub == 0) ||
- (test_bit(epid, (void *)&epid_out_traffic) == 0) ||
- (epid == DUMMY_EPID) ||
- (epid == INVALID_EPID)) {
- /* Nothing here to see. */
- continue;
- }
- sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-
- /* Find the last descriptor of the currently active URB for this ep.
- This is the first descriptor in the sub list marked for a descriptor
- interrupt. */
- while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
- sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
- }
- assert(sb_desc);
-
- dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p",
- epid,
- phys_to_virt(TxIsocEPList[epid].sub),
- sb_desc);
-
- epid_done = 0;
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- assert(urb);
-
- while (urb && !epid_done) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-
- if (!usb_pipeout(urb->pipe)) {
- /* descr interrupts are generated only for out pipes. */
- epid_done = 1;
- continue;
- }
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (sb_desc != urb_priv->last_sb) {
-
- /* This urb has been sent. */
- dbg_isoc("out URB 0x%p sent", urb);
-
- urb_priv->urb_state = TRANSFER_DONE;
-
- } else if ((sb_desc == urb_priv->last_sb) &&
- !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-
- assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes));
- assert(sb_desc->next == 0);
-
- dbg_isoc("out URB 0x%p last in list, epid disabled", urb);
- TxIsocEPList[epid].sub = 0;
- TxIsocEPList[epid].hw_len = 0;
- urb_priv->urb_state = TRANSFER_DONE;
-
- epid_done = 1;
-
- } else {
- epid_done = 1;
- }
- if (!epid_done) {
- urb = urb_list_next(urb, epid);
- }
- }
-
- }
-
- *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
-
- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC);
- assert(comp_data != NULL);
-
- INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data);
- schedule_work(&comp_data->usb_bh);
- }
-
- DBFEXIT;
- return IRQ_HANDLED;
-}
-
-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data)
-{
- usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data;
-
- struct urb *urb;
- int epid;
- int epid_done;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- dbg_isoc("dma8_sub3_descr (ISOC) bottom half.");
-
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
- unsigned long flags;
-
- save_flags(flags);
- cli();
-
- epid_done = 0;
-
- /* The descriptor interrupt handler has marked all transmitted isoch. out
- URBs with TRANSFER_DONE. Now we traverse all epids and for all that
- have isoch. out traffic traverse its URB list and complete the
- transmitted URB.
- */
-
- while (!epid_done) {
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- if (urb == 0) {
- epid_done = 1;
- continue;
- }
-
- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
- epid_done = 1;
- continue;
- }
-
- if (!usb_pipeout(urb->pipe)) {
- /* descr interrupts are generated only for out pipes. */
- epid_done = 1;
- continue;
- }
-
- dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == TRANSFER_DONE) {
- int i;
- struct usb_iso_packet_descriptor *packet;
-
- /* This urb has been sent. */
- dbg_isoc("Completing isoc out URB 0x%p", urb);
-
- for (i = 0; i < urb->number_of_packets; i++) {
- packet = &urb->iso_frame_desc[i];
- packet->status = 0;
- packet->actual_length = packet->length;
- }
-
- etrax_usb_complete_isoc_urb(urb, 0);
-
- if (urb_list_empty(epid)) {
- etrax_usb_free_epid(epid);
- epid_done = 1;
- }
- } else {
- epid_done = 1;
- }
- }
- restore_flags(flags);
-
- }
- kmem_cache_free(isoc_compl_cache, comp_data);
-
- DBFEXIT;
-}
-
-
-
-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc)
-{
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- int epid = 0;
- unsigned long flags;
-
- /* Isoc diagnostics. */
- static int curr_fm = 0;
- static int prev_fm = 0;
-
- DBFENTER;
-
- /* Clear this interrupt. */
- *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
-
- /* Note that this while loop assumes that all packets span only
- one rx descriptor. */
-
- /* The reason we cli here is that we call the driver's callback functions. */
- save_flags(flags);
- cli();
-
- while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
-
- epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
- urb = urb_list_first(epid);
-
- //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb);
-
- if (!urb) {
- err("No urb for epid %d in rx interrupt", epid);
- __dump_ept_data(epid);
- goto skip_out;
- }
-
- /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since
- ctrl pipes are not. */
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
- __u32 r_usb_ept_data;
- int no_error = 0;
-
- assert(test_bit(epid, (void *)&epid_usage_bitmask));
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- r_usb_ept_data = *R_USB_EPT_DATA_ISO;
-
- if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
- (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
- (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
- /* Not an error, just a failure to receive an expected iso
- in packet in this frame. This is not documented
- in the designers reference.
- */
- no_error++;
- } else {
- warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data);
- }
- } else {
- r_usb_ept_data = *R_USB_EPT_DATA;
- warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data);
- }
-
- if (!no_error){
- warn("error in rx desc->status, epid %d, first urb = 0x%lx",
- epid, (unsigned long)urb);
- __dump_in_desc(myNextRxDesc);
-
- warn("R_USB_STATUS = 0x%x", *R_USB_STATUS);
-
- /* Check that ept was disabled when error occurred. */
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_CONTROL:
- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_INTERRUPT:
- assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- case PIPE_ISOCHRONOUS:
- assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)));
- break;
- default:
- warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p",
- usb_pipetype(urb->pipe),
- urb);
- }
- etrax_usb_complete_urb(urb, -EPROTO);
- goto skip_out;
- }
- }
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
- (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
- (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
- /* We get nodata for empty data transactions, and the rx descriptor's
- hw_len field is not valid in that case. No data to copy in other
- words. */
- } else {
- /* Make sure the data fits in the buffer. */
- assert(urb_priv->rx_offset + myNextRxDesc->hw_len
- <= urb->transfer_buffer_length);
-
- memcpy(urb->transfer_buffer + urb_priv->rx_offset,
- phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
- urb_priv->rx_offset += myNextRxDesc->hw_len;
- }
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
- if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) &&
- ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) ==
- IO_STATE(USB_EP_command, enable, yes))) {
- /* The EP is still enabled, so the OUT packet used to ack
- the in data is probably not processed yet. If the EP
- sub pointer has not moved beyond urb_priv->last_sb mark
- it for a descriptor interrupt and complete the urb in
- the descriptor interrupt handler.
- */
- USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0;
-
- while ((sub != NULL) && (sub != urb_priv->last_sb)) {
- sub = sub->next ? phys_to_virt(sub->next) : 0;
- }
- if (sub != NULL) {
- /* The urb has not been fully processed. */
- urb_priv->urb_state = WAITING_FOR_DESCR_INTR;
- } else {
- warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub);
- etrax_usb_complete_urb(urb, 0);
- }
- } else {
- etrax_usb_complete_urb(urb, 0);
- }
- }
-
- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-
- struct usb_iso_packet_descriptor *packet;
-
- if (urb_priv->urb_state == UNLINK) {
- info("Ignoring rx data for urb being unlinked.");
- goto skip_out;
- } else if (urb_priv->urb_state == NOT_STARTED) {
- info("What? Got rx data for urb that isn't started?");
- goto skip_out;
- }
-
- packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
- packet->status = 0;
-
- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
- /* We get nodata for empty data transactions, and the rx descriptor's
- hw_len field is not valid in that case. We copy 0 bytes however to
- stay in synch. */
- packet->actual_length = 0;
- } else {
- packet->actual_length = myNextRxDesc->hw_len;
- /* Make sure the data fits in the buffer. */
- assert(packet->actual_length <= packet->length);
- memcpy(urb->transfer_buffer + packet->offset,
- phys_to_virt(myNextRxDesc->buf), packet->actual_length);
- }
-
- /* Increment the packet counter. */
- urb_priv->isoc_packet_counter++;
-
- /* Note that we don't care about the eot field in the rx descriptor's status.
- It will always be set for isoc traffic. */
- if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
-
- /* Out-of-synch diagnostics. */
- curr_fm = (*R_USB_FM_NUMBER & 0x7ff);
- if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) {
- /* This test is wrong, if there is more than one isoc
- in endpoint active it will always calculate wrong
- since prev_fm is shared by all endpoints.
-
- FIXME Make this check per URB using urb->start_frame.
- */
- dbg_isoc("Out of synch? Previous frame = %d, current frame = %d",
- prev_fm, curr_fm);
-
- }
- prev_fm = curr_fm;
-
- /* Complete the urb with status OK. */
- etrax_usb_complete_isoc_urb(urb, 0);
- }
- }
-
- skip_out:
-
- /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr
- has the same layout as USB_IN_Desc for the relevant fields.) */
- prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc);
-
- myPrevRxDesc = myNextRxDesc;
- myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol);
- myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
- myLastRxDesc = myPrevRxDesc;
-
- myNextRxDesc->status = 0;
- myNextRxDesc = phys_to_virt(myNextRxDesc->next);
- }
-
- restore_flags(flags);
-
- DBFEXIT;
-
- return IRQ_HANDLED;
-}
-
-
-/* This function will unlink the SB descriptors associated with this urb. */
-static int etrax_remove_from_sb_list(struct urb *urb)
-{
- USB_SB_Desc_t *next_sb, *first_sb, *last_sb;
- etrax_urb_priv_t *urb_priv;
- int i = 0;
-
- DBFENTER;
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor
- doesn't really need to be disabled, it's just that we expect it to be. */
- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
- assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
- }
-
- first_sb = urb_priv->first_sb;
- last_sb = urb_priv->last_sb;
-
- assert(first_sb);
- assert(last_sb);
-
- while (first_sb != last_sb) {
- next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next);
- kmem_cache_free(usb_desc_cache, first_sb);
- first_sb = next_sb;
- i++;
- }
- kmem_cache_free(usb_desc_cache, last_sb);
- i++;
- dbg_sb("%d SB descriptors freed", i);
- /* Compare i with urb->number_of_packets for Isoc traffic.
- Should be same when calling unlink_urb */
-
- DBFEXIT;
-
- return i;
-}
-
-static int etrax_usb_submit_bulk_urb(struct urb *urb)
-{
- int epid;
- int empty;
- unsigned long flags;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- /* Epid allocation, empty check and list add must be protected.
- Read about this in etrax_usb_submit_ctrl_urb. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- spin_unlock_irqrestore(&urb_list_lock, flags);
- return -ENOMEM;
- }
- empty = urb_list_empty(epid);
- urb_list_add(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d",
- usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid);
-
- /* Mark the urb as being in progress. */
- urb->status = -EINPROGRESS;
-
- /* Setup the hcpriv data. */
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- /* This sets rx_offset to 0. */
- urb_priv->urb_state = NOT_STARTED;
- urb->hcpriv = urb_priv;
-
- if (empty) {
- etrax_usb_add_to_bulk_sb_list(urb, epid);
- }
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid)
-{
- USB_SB_Desc_t *sb_desc;
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- unsigned long flags;
- char maxlen;
-
- DBFENTER;
-
- dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb);
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-
- sb_desc = kmem_cache_zalloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc != NULL);
-
-
- if (usb_pipeout(urb->pipe)) {
-
- dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid);
-
- /* This is probably a sanity check of the bulk transaction length
- not being larger than 64 kB. */
- if (urb->transfer_buffer_length > 0xffff) {
- panic("urb->transfer_buffer_length > 0xffff");
- }
-
- sb_desc->sw_len = urb->transfer_buffer_length;
-
- /* The rem field is don't care if it's not a full-length transfer, so setting
- it shouldn't hurt. Also, rem isn't used for OUT traffic. */
- sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- /* The full field is set to yes, even if we don't actually check that this is
- a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0).
- Setting full prevents the USB controller from sending an empty packet in
- that case. However, if URB_ZERO_PACKET was set we want that. */
- if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
- sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
- }
-
- sb_desc->buf = virt_to_phys(urb->transfer_buffer);
- sb_desc->next = 0;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid);
-
- sb_desc->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
-
- /* The rem field is don't care if it's not a full-length transfer, so setting
- it shouldn't hurt. */
- sb_desc->command =
- (IO_FIELD(USB_SB_command, rem,
- urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc->buf = 0;
- sb_desc->next = 0;
- }
-
- urb_priv->first_sb = sb_desc;
- urb_priv->last_sb = sb_desc;
- urb_priv->epid = epid;
-
- urb->hcpriv = urb_priv;
-
- /* Reset toggle bits and reset error count. */
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- /* FIXME: Is this a special case since the hold field is checked,
- or should we check hold in a lot of other cases as well? */
- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
- panic("Hold was set in %s", __FUNCTION__);
- }
-
- /* Reset error counters (regardless of which direction this traffic is). */
- *R_USB_EPT_DATA &=
- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
- IO_MASK(R_USB_EPT_DATA, error_count_out));
-
- /* Software must preset the toggle bits. */
- if (usb_pipeout(urb->pipe)) {
- char toggle =
- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
- } else {
- char toggle =
- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
- }
-
- /* Assert that the EP descriptor is disabled. */
- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-
- /* The reason we set the EP's sub pointer directly instead of
- walking the SB list and linking it last in the list is that we only
- have one active urb at a time (the rest are queued). */
-
- /* Note that we cannot have interrupts running when we have set the SB descriptor
- but the EP is not yet enabled. If a bulk eot happens for another EP, we will
- find this EP disabled and with a SB != 0, which will make us think that it's done. */
- TxBulkEPList[epid].sub = virt_to_phys(sb_desc);
- TxBulkEPList[epid].hw_len = 0;
- /* Note that we don't have to fill in the ep_id field since this
- was done when we allocated the EP descriptors in init_tx_bulk_ep. */
-
- /* Check if the dummy list is already with us (if several urbs were queued). */
- if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) {
-
- dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d",
- (unsigned long)urb, epid);
-
- /* The last EP in the dummy list already has its next pointer set to
- TxBulkEPList[epid].next. */
-
- /* We don't need to check if the DMA is at this EP or not before changing the
- next pointer, since we will do it in one 32-bit write (EP descriptors are
- 32-bit aligned). */
- TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
- }
- /* Enable the EP descr. */
- dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid);
- TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* Everything is set up, safe to enable interrupts again. */
- restore_flags(flags);
-
- /* If the DMA bulk channel isn't running, we need to restart it if it
- has stopped at the last EP descriptor (DMA stopped because there was
- no more traffic) or if it has stopped at a dummy EP with the intr flag
- set (DMA stopped because we were too slow in inserting new traffic). */
- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
-
- USB_EP_Desc_t *ep;
- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
- dbg_bulk("DMA channel not running in add");
- dbg_bulk("DMA is at 0x%lx", (unsigned long)ep);
-
- if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) ||
- (ep->command & 0x8) >> 3) {
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
- /* Update/restart the bulk start timer since we just started the channel. */
- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
- /* Update/restart the bulk eot timer since we just inserted traffic. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
- }
- }
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
- unsigned long flags;
-
- DBFENTER;
-
- if (status)
- warn("Completing bulk urb with status %d.", status);
-
- dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid);
-
- /* Update the urb list. */
- urb_list_del(urb, epid);
-
- /* For an IN pipe, we always set the actual length, regardless of whether there was
- an error or not (which means the device driver can use the data if it wants to). */
- if (usb_pipein(urb->pipe)) {
- urb->actual_length = urb_priv->rx_offset;
- } else {
- /* Set actual_length for OUT urbs also; the USB mass storage driver seems
- to want that. We wouldn't know of any partial writes if there was an error. */
- if (status == 0) {
- urb->actual_length = urb->transfer_buffer_length;
- } else {
- urb->actual_length = 0;
- }
- }
-
- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
- Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
-
- /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */
- if (usb_pipeout(urb->pipe)) {
- char toggle =
- IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- } else {
- char toggle =
- IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), toggle);
- }
- restore_flags(flags);
-
- /* Remember to free the SBs. */
- etrax_remove_from_sb_list(urb);
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- /* If there are any more urb's in the list we'd better start sending */
- if (!urb_list_empty(epid)) {
-
- struct urb *new_urb;
-
- /* Get the first urb. */
- new_urb = urb_list_first(epid);
- assert(new_urb);
-
- dbg_bulk("More bulk for epid %d", epid);
-
- etrax_usb_add_to_bulk_sb_list(new_urb, epid);
- }
-
- urb->status = status;
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (usb_pipein(urb->pipe) &&
- (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (urb_list_empty(epid)) {
- /* This means that this EP is now free, deconfigure it. */
- etrax_usb_free_epid(epid);
-
- /* No more traffic; time to clean up.
- Must set sub pointer to 0, since we look at the sub pointer when handling
- the bulk eot interrupt. */
-
- dbg_bulk("No bulk for epid %d", epid);
-
- TxBulkEPList[epid].sub = 0;
-
- /* Unlink the dummy list. */
-
- dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d",
- (unsigned long)urb, epid);
-
- /* No need to wait for the DMA before changing the next pointer.
- The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
- the last one (INVALID_EPID) for actual traffic. */
- TxBulkEPList[epid].next =
- virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_submit_ctrl_urb(struct urb *urb)
-{
- int epid;
- int empty;
- unsigned long flags;
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */
-
- /* Epid allocation, empty check and list add must be protected.
-
- Epid allocation because if we find an existing epid for this endpoint an urb might be
- completed (emptying the list) before we add the new urb to the list, causing the epid
- to be de-allocated. We would then start the transfer with an invalid epid -> epid attn.
-
- Empty check and add because otherwise we might conclude that the list is not empty,
- after which it becomes empty before we add the new urb to the list, causing us not to
- insert the new traffic into the SB list. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- spin_unlock_irqrestore(&urb_list_lock, flags);
- DBFEXIT;
- return -ENOMEM;
- }
- empty = urb_list_empty(epid);
- urb_list_add(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d",
- (unsigned long)urb, empty ? "empty" : "", epid);
-
- /* Mark the urb as being in progress. */
- urb->status = -EINPROGRESS;
-
- /* Setup the hcpriv data. */
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- /* This sets rx_offset to 0. */
- urb_priv->urb_state = NOT_STARTED;
- urb->hcpriv = urb_priv;
-
- if (empty) {
- etrax_usb_add_to_ctrl_sb_list(urb, epid);
- }
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid)
-{
- USB_SB_Desc_t *sb_desc_setup;
- USB_SB_Desc_t *sb_desc_data;
- USB_SB_Desc_t *sb_desc_status;
-
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-
- unsigned long flags;
- char maxlen;
-
- DBFENTER;
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-
- sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_setup != NULL);
- sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_status != NULL);
-
- /* Initialize the mandatory setup SB descriptor (used only in control transfers) */
- sb_desc_setup->sw_len = 8;
- sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, setup) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes));
-
- sb_desc_setup->buf = virt_to_phys(urb->setup_packet);
-
- if (usb_pipeout(urb->pipe)) {
- dbg_ctrl("Transfer for epid %d is OUT", epid);
-
- /* If this Control OUT transfer has an optional data stage we add an OUT token
- before the mandatory IN (status) token, hence the reordered SB list */
-
- sb_desc_setup->next = virt_to_phys(sb_desc_status);
- if (urb->transfer_buffer) {
-
- dbg_ctrl("This OUT transfer has an extra data stage");
-
- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_data != NULL);
-
- sb_desc_setup->next = virt_to_phys(sb_desc_data);
-
- sb_desc_data->sw_len = urb->transfer_buffer_length;
- sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes));
- sb_desc_data->buf = virt_to_phys(urb->transfer_buffer);
- sb_desc_data->next = virt_to_phys(sb_desc_status);
- }
-
- sb_desc_status->sw_len = 1;
- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc_status->buf = 0;
- sb_desc_status->next = 0;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_ctrl("Transfer for epid %d is IN", epid);
- dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length);
- dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen);
-
- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(sb_desc_data != NULL);
-
- sb_desc_setup->next = virt_to_phys(sb_desc_data);
-
- sb_desc_data->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
- dbg_ctrl("sw_len got %d", sb_desc_data->sw_len);
-
- sb_desc_data->command =
- (IO_FIELD(USB_SB_command, rem,
- urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes));
-
- sb_desc_data->buf = 0;
- sb_desc_data->next = virt_to_phys(sb_desc_status);
-
- /* Read comment at zout_buffer declaration for an explanation to this. */
- sb_desc_status->sw_len = 1;
- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, full, yes) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- sb_desc_status->buf = virt_to_phys(&zout_buffer[0]);
- sb_desc_status->next = 0;
- }
-
- urb_priv->first_sb = sb_desc_setup;
- urb_priv->last_sb = sb_desc_status;
- urb_priv->epid = epid;
-
- urb_priv->urb_state = STARTED;
-
- /* Reset toggle bits and reset error count, remember to di and ei */
- /* Warning: it is possible that this locking doesn't work with bottom-halves */
-
- save_flags(flags);
- cli();
-
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
- panic("Hold was set in %s", __FUNCTION__);
- }
-
-
- /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits
- are set to a specific value. Why the difference? Read "Transfer and Toggle Bits
- in Designer's Reference, p. 8 - 11. */
- *R_USB_EPT_DATA &=
- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
- IO_MASK(R_USB_EPT_DATA, error_count_out) |
- IO_MASK(R_USB_EPT_DATA, t_in) |
- IO_MASK(R_USB_EPT_DATA, t_out));
-
- /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now
- (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */
- restore_flags(flags);
-
- /* Assert that the EP descriptor is disabled. */
- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-
- /* Set up and enable the EP descriptor. */
- TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup);
- TxCtrlEPList[epid].hw_len = 0;
- TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
-
- DBFENTER;
-
- if (status)
- warn("Completing ctrl urb with status %d.", status);
-
- dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb);
-
- /* Remove this urb from the list. */
- urb_list_del(urb, epid);
-
- /* For an IN pipe, we always set the actual length, regardless of whether there was
- an error or not (which means the device driver can use the data if it wants to). */
- if (usb_pipein(urb->pipe)) {
- urb->actual_length = urb_priv->rx_offset;
- }
-
- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
- Like, maybe we shouldn't insert more traffic. */
-
- /* Remember to free the SBs. */
- etrax_remove_from_sb_list(urb);
- kfree(urb_priv);
- urb->hcpriv = 0;
-
- /* If there are any more urbs in the list we'd better start sending. */
- if (!urb_list_empty(epid)) {
- struct urb *new_urb;
-
- /* Get the first urb. */
- new_urb = urb_list_first(epid);
- assert(new_urb);
-
- dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb);
-
- etrax_usb_add_to_ctrl_sb_list(new_urb, epid);
- }
-
- urb->status = status;
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (usb_pipein(urb->pipe) &&
- (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (urb_list_empty(epid)) {
- /* No more traffic. Time to clean up. */
- etrax_usb_free_epid(epid);
- /* Must set sub pointer to 0. */
- dbg_ctrl("No ctrl for epid %d", epid);
- TxCtrlEPList[epid].sub = 0;
- }
-
- DBFEXIT;
-}
-
-static int etrax_usb_submit_intr_urb(struct urb *urb)
-{
-
- int epid;
-
- DBFENTER;
-
- if (usb_pipeout(urb->pipe)) {
- /* Unsupported transfer type.
- We don't support interrupt out traffic. (If we do, we can't support
- intervals for neither in or out traffic, but are forced to schedule all
- interrupt traffic in one frame.) */
- return -EINVAL;
- }
-
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- return -ENOMEM;
- }
-
- if (!urb_list_empty(epid)) {
- /* There is already a queued urb for this endpoint. */
- etrax_usb_free_epid(epid);
- return -ENXIO;
- }
-
- urb->status = -EINPROGRESS;
-
- dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid);
-
- urb_list_add(urb, epid);
- etrax_usb_add_to_intr_sb_list(urb, epid);
-
- return 0;
-
- DBFEXIT;
-}
-
-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid)
-{
-
- volatile USB_EP_Desc_t *tmp_ep;
- volatile USB_EP_Desc_t *first_ep;
-
- char maxlen;
- int interval;
- int i;
-
- etrax_urb_priv_t *urb_priv;
-
- DBFENTER;
-
- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
- interval = urb->interval;
-
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
- assert(urb_priv != NULL);
- urb->hcpriv = urb_priv;
-
- first_ep = &TxIntrEPList[0];
-
- /* Round of the interval to 2^n, it is obvious that this code favours
- smaller numbers, but that is actually a good thing */
- /* FIXME: The "rounding error" for larger intervals will be quite
- large. For in traffic this shouldn't be a problem since it will only
- mean that we "poll" more often. */
- for (i = 0; interval; i++) {
- interval = interval >> 1;
- }
- interval = 1 << (i - 1);
-
- dbg_intr("Interval rounded to %d", interval);
-
- tmp_ep = first_ep;
- i = 0;
- do {
- if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
- if ((i % interval) == 0) {
- /* Insert the traffic ep after tmp_ep */
- USB_EP_Desc_t *ep_desc;
- USB_SB_Desc_t *sb_desc;
-
- dbg_intr("Inserting EP for epid %d", epid);
-
- ep_desc = (USB_EP_Desc_t *)
- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- sb_desc = (USB_SB_Desc_t *)
- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
- assert(ep_desc != NULL);
- CHECK_ALIGN(ep_desc);
- assert(sb_desc != NULL);
-
- ep_desc->sub = virt_to_phys(sb_desc);
- ep_desc->hw_len = 0;
- ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
- IO_STATE(USB_EP_command, enable, yes));
-
-
- /* Round upwards the number of packets of size maxlen
- that this SB descriptor should receive. */
- sb_desc->sw_len = urb->transfer_buffer_length ?
- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
- sb_desc->next = 0;
- sb_desc->buf = 0;
- sb_desc->command =
- (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) |
- IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- ep_desc->next = tmp_ep->next;
- tmp_ep->next = virt_to_phys(ep_desc);
- }
- i++;
- }
- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
- } while (tmp_ep != first_ep);
-
-
- /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */
- urb_priv->epid = epid;
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-
-
-static void etrax_usb_complete_intr_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
-
- DBFENTER;
-
- if (status)
- warn("Completing intr urb with status %d.", status);
-
- dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb);
-
- urb->status = status;
- urb->actual_length = urb_priv->rx_offset;
-
- dbg_intr("interrupt urb->actual_length = %d", urb->actual_length);
-
- /* We let any non-zero status from the layer above have precedence. */
- if (status == 0) {
- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
- is to be treated as an error. */
- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
- if (urb->actual_length !=
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
- urb->status = -EREMOTEIO;
- }
- }
- }
-
- /* The driver will resubmit the URB so we need to remove it first */
- etrax_usb_unlink_urb(urb, 0);
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- DBFEXIT;
-}
-
-
-static int etrax_usb_submit_isoc_urb(struct urb *urb)
-{
- int epid;
- unsigned long flags;
-
- DBFENTER;
-
- dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb);
-
- /* Epid allocation, empty check and list add must be protected.
- Read about this in etrax_usb_submit_ctrl_urb. */
-
- spin_lock_irqsave(&urb_list_lock, flags);
- /* Is there an active epid for this urb ? */
- epid = etrax_usb_setup_epid(urb);
- if (epid == -1) {
- DBFEXIT;
- spin_unlock_irqrestore(&urb_list_lock, flags);
- return -ENOMEM;
- }
-
- /* Ok, now we got valid endpoint, lets insert some traffic */
-
- urb->status = -EINPROGRESS;
-
- /* Find the last urb in the URB_List and add this urb after that one.
- Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This
- is important to make this in "real time" since isochronous traffic is
- time sensitive. */
-
- dbg_isoc("Adding isoc urb to (possibly empty) list");
- urb_list_add(urb, epid);
- etrax_usb_add_to_isoc_sb_list(urb, epid);
- spin_unlock_irqrestore(&urb_list_lock, flags);
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_check_error_isoc_ep(const int epid)
-{
- unsigned long int flags;
- int error_code;
- __u32 r_usb_ept_data;
-
- /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof,
- bulk_eot and epid_attn interrupts. So we just check the status of
- the epid without testing if for it in R_USB_EPID_ATTN. */
-
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
- registers, they are located at the same address and are of the same size.
- In other words, this read should be ok for isoc also. */
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
-
- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
- warn("Hold was set for epid %d.", epid);
- return;
- }
-
- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) {
-
- /* This indicates that the SB list of the ept was completed before
- new data was appended to it. This is not an error, but indicates
- large system or USB load and could possibly cause trouble for
- very timing sensitive USB device drivers so we log it.
- */
- info("Isoc. epid %d disabled with no error", epid);
- return;
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) {
- /* Not really a protocol error, just says that the endpoint gave
- a stall response. Note that error_code cannot be stall for isoc. */
- panic("Isoc traffic cannot stall");
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) {
- /* Two devices responded to a transaction request. Must be resolved
- by software. FIXME: Reset ports? */
- panic("Bus error for epid %d."
- " Two devices responded to transaction request",
- epid);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
- /* DMA overrun or underrun. */
- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
-
- /* It seems that error_code = buffer_error in
- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
- are the same error. */
- }
-}
-
-
-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid)
-{
-
- int i = 0;
-
- etrax_urb_priv_t *urb_priv;
- USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc;
-
- DBFENTER;
-
- prev_sb_desc = next_sb_desc = temp_sb_desc = NULL;
-
- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
- assert(urb_priv != NULL);
-
- urb->hcpriv = urb_priv;
- urb_priv->epid = epid;
-
- if (usb_pipeout(urb->pipe)) {
-
- if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n");
-
- dbg_isoc("Transfer for epid %d is OUT", epid);
- dbg_isoc("%d packets in URB", urb->number_of_packets);
-
- /* Create one SB descriptor for each packet and link them together. */
- for (i = 0; i < urb->number_of_packets; i++) {
- if (!urb->iso_frame_desc[i].length)
- continue;
-
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
- assert(next_sb_desc != NULL);
-
- if (urb->iso_frame_desc[i].length > 0) {
-
- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) |
- IO_STATE(USB_SB_command, eot, yes));
-
- next_sb_desc->sw_len = urb->iso_frame_desc[i].length;
- next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset);
-
- /* Check if full length transfer. */
- if (urb->iso_frame_desc[i].length ==
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
- next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
- }
- } else {
- dbg_isoc("zero len packet");
- next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
- IO_STATE(USB_SB_command, tt, zout) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, full, yes));
-
- next_sb_desc->sw_len = 1;
- next_sb_desc->buf = virt_to_phys(&zout_buffer[0]);
- }
-
- /* First SB descriptor that belongs to this urb */
- if (i == 0)
- urb_priv->first_sb = next_sb_desc;
- else
- prev_sb_desc->next = virt_to_phys(next_sb_desc);
-
- prev_sb_desc = next_sb_desc;
- }
-
- next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) |
- IO_STATE(USB_SB_command, eol, yes));
- next_sb_desc->next = 0;
- urb_priv->last_sb = next_sb_desc;
-
- } else if (usb_pipein(urb->pipe)) {
-
- dbg_isoc("Transfer for epid %d is IN", epid);
- dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length);
- dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length);
-
- /* Note that in descriptors for periodic traffic are not consumed. This means that
- the USB controller never propagates in the SB list. In other words, if there already
- is an SB descriptor in the list for this EP we don't have to do anything. */
- if (TxIsocEPList[epid].sub == 0) {
- dbg_isoc("Isoc traffic not already running, allocating SB");
-
- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC);
- assert(next_sb_desc != NULL);
-
- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) |
- IO_STATE(USB_SB_command, eot, yes) |
- IO_STATE(USB_SB_command, eol, yes));
-
- next_sb_desc->next = 0;
- next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant
- for periodic in traffic as long as it is more
- than zero. Set to 1 always. */
- next_sb_desc->buf = 0;
-
- /* The rem field is don't care for isoc traffic, so we don't set it. */
-
- /* Only one SB descriptor that belongs to this urb. */
- urb_priv->first_sb = next_sb_desc;
- urb_priv->last_sb = next_sb_desc;
-
- } else {
-
- dbg_isoc("Isoc traffic already running, just setting first/last_sb");
-
- /* Each EP for isoc in will have only one SB descriptor, setup when submitting the
- already active urb. Note that even though we may have several first_sb/last_sb
- pointing at the same SB descriptor, they are freed only once (when the list has
- become empty). */
- urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub);
- urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub);
- return;
- }
-
- }
-
- /* Find the spot to insert this urb and add it. */
- if (TxIsocEPList[epid].sub == 0) {
- /* First SB descriptor inserted in this list (in or out). */
- dbg_isoc("Inserting SB desc first in list");
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-
- } else {
- /* Isochronous traffic is already running, insert new traffic last (only out). */
- dbg_isoc("Inserting SB desc last in list");
- temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
- while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
- IO_STATE(USB_SB_command, eol, yes)) {
- assert(temp_sb_desc->next);
- temp_sb_desc = phys_to_virt(temp_sb_desc->next);
- }
- dbg_isoc("Appending list on desc 0x%p", temp_sb_desc);
-
- /* Next pointer must be set before eol is removed. */
- temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
- /* Clear the previous end of list flag since there is a new in the
- added SB descriptor list. */
- temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
-
- if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
- /* 8.8.5 in Designer's Reference says we should check for and correct
- any errors in the EP here. That should not be necessary if epid_attn
- is handled correctly, so we assume all is ok. */
- dbg_isoc("EP disabled");
- etrax_usb_check_error_isoc_ep(epid);
-
- /* The SB list was exhausted. */
- if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
- /* The new sublist did not get processed before the EP was
- disabled. Setup the EP again. */
- dbg_isoc("Set EP sub to new list");
- TxIsocEPList[epid].hw_len = 0;
- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
- }
- }
- }
-
- if (urb->transfer_flags & URB_ISO_ASAP) {
- /* The isoc transfer should be started as soon as possible. The start_frame
- field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER
- with a USB Chief trace shows that the first isoc IN token is sent 2 frames
- later. I'm not sure how this affects usage of the start_frame field by the
- device driver, or how it affects things when USB_ISO_ASAP is not set, so
- therefore there's no compensation for the 2 frame "lag" here. */
- urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
- urb_priv->urb_state = STARTED;
- dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame);
- } else {
- /* Not started yet. */
- urb_priv->urb_state = NOT_STARTED;
- dbg_isoc("urb_priv->urb_state set to NOT_STARTED");
- }
-
- /* We start the DMA sub channel without checking if it's running or not, because:
- 1) If it's already running, issuing the start command is a nop.
- 2) We avoid a test-and-set race condition. */
- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status)
-{
- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- int epid = urb_priv->epid;
- int auto_resubmit = 0;
-
- DBFENTER;
- dbg_isoc("complete urb 0x%p, status %d", urb, status);
-
- if (status)
- warn("Completing isoc urb with status %d.", status);
-
- if (usb_pipein(urb->pipe)) {
- int i;
-
- /* Make that all isoc packets have status and length set before
- completing the urb. */
- for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) {
- urb->iso_frame_desc[i].actual_length = 0;
- urb->iso_frame_desc[i].status = -EPROTO;
- }
-
- urb_list_del(urb, epid);
-
- if (!list_empty(&urb_list[epid])) {
- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
- } else {
- unsigned long int flags;
- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- /* The EP was enabled, disable it and wait. */
- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-
- /* Ah, the luxury of busy-wait. */
- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
- }
-
- etrax_remove_from_sb_list(urb);
- TxIsocEPList[epid].sub = 0;
- TxIsocEPList[epid].hw_len = 0;
-
- save_flags(flags);
- cli();
- etrax_usb_free_epid(epid);
- restore_flags(flags);
- }
-
- urb->hcpriv = 0;
- kfree(urb_priv);
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
- } else if (usb_pipeout(urb->pipe)) {
- int freed_descr;
-
- dbg_isoc("Isoc out urb complete 0x%p", urb);
-
- /* Update the urb list. */
- urb_list_del(urb, epid);
-
- freed_descr = etrax_remove_from_sb_list(urb);
- dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets);
- assert(freed_descr == urb->number_of_packets);
- urb->hcpriv = 0;
- kfree(urb_priv);
-
- /* Release allocated bandwidth. */
- usb_release_bandwidth(urb->dev, urb, 0);
- }
-
- urb->status = status;
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
-
- if (auto_resubmit) {
- /* Check that urb was not unlinked by the complete callback. */
- if (__urb_list_entry(urb, epid)) {
- /* Move this one down the list. */
- urb_list_move_last(urb, epid);
-
- /* Mark the now first urb as started (may already be). */
- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
-
- /* Must set this to 0 since this urb is still active after
- completion. */
- urb_priv->isoc_packet_counter = 0;
- } else {
- warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb);
- }
- }
-
- DBFEXIT;
-}
-
-static void etrax_usb_complete_urb(struct urb *urb, int status)
-{
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- etrax_usb_complete_bulk_urb(urb, status);
- break;
- case PIPE_CONTROL:
- etrax_usb_complete_ctrl_urb(urb, status);
- break;
- case PIPE_INTERRUPT:
- etrax_usb_complete_intr_urb(urb, status);
- break;
- case PIPE_ISOCHRONOUS:
- etrax_usb_complete_isoc_urb(urb, status);
- break;
- default:
- err("Unknown pipetype");
- }
-}
-
-
-
-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc)
-{
- usb_interrupt_registers_t *reg;
- unsigned long flags;
- __u32 irq_mask;
- __u8 status;
- __u32 epid_attn;
- __u16 port_status_1;
- __u16 port_status_2;
- __u32 fm_number;
-
- DBFENTER;
-
- /* Read critical registers into local variables, do kmalloc afterwards. */
- save_flags(flags);
- cli();
-
- irq_mask = *R_USB_IRQ_MASK_READ;
- /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS
- must be read before R_USB_EPID_ATTN since reading the latter clears the
- ourun and perror fields of R_USB_STATUS. */
- status = *R_USB_STATUS;
-
- /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */
- epid_attn = *R_USB_EPID_ATTN;
-
- /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
- port_status interrupt. */
- port_status_1 = *R_USB_RH_PORT_STATUS_1;
- port_status_2 = *R_USB_RH_PORT_STATUS_2;
-
- /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
- /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */
- fm_number = *R_USB_FM_NUMBER;
-
- restore_flags(flags);
-
- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, GFP_ATOMIC);
-
- assert(reg != NULL);
-
- reg->hc = (etrax_hc_t *)vhc;
-
- /* Now put register values into kmalloc'd area. */
- reg->r_usb_irq_mask_read = irq_mask;
- reg->r_usb_status = status;
- reg->r_usb_epid_attn = epid_attn;
- reg->r_usb_rh_port_status_1 = port_status_1;
- reg->r_usb_rh_port_status_2 = port_status_2;
- reg->r_usb_fm_number = fm_number;
-
- INIT_WORK(&reg->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg);
- schedule_work(&reg->usb_bh);
-
- DBFEXIT;
-
- return IRQ_HANDLED;
-}
-
-static void etrax_usb_hc_interrupt_bottom_half(void *data)
-{
- usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data;
- __u32 irq_mask = reg->r_usb_irq_mask_read;
-
- DBFENTER;
-
- /* Interrupts are handled in order of priority. */
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
- etrax_usb_hc_epid_attn_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
- etrax_usb_hc_port_status_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
- etrax_usb_hc_ctl_status_interrupt(reg);
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
- etrax_usb_hc_isoc_eof_interrupt();
- }
- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
- /* Update/restart the bulk start timer since obviously the channel is running. */
- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
- /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-
- etrax_usb_hc_bulk_eot_interrupt(0);
- }
-
- kmem_cache_free(top_half_reg_cache, reg);
-
- DBFEXIT;
-}
-
-
-void etrax_usb_hc_isoc_eof_interrupt(void)
-{
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- int epid;
- unsigned long flags;
-
- DBFENTER;
-
- /* Do not check the invalid epid (it has a valid sub pointer). */
- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-
- /* Do not check the invalid epid (it has a valid sub pointer). */
- if ((epid == DUMMY_EPID) || (epid == INVALID_EPID))
- continue;
-
- /* Disable interrupts to block the isoc out descriptor interrupt handler
- from being called while the isoc EPID list is being checked.
- */
- save_flags(flags);
- cli();
-
- if (TxIsocEPList[epid].sub == 0) {
- /* Nothing here to see. */
- restore_flags(flags);
- continue;
- }
-
- /* Get the first urb (if any). */
- urb = urb_list_first(epid);
- if (urb == 0) {
- warn("Ignoring NULL urb");
- restore_flags(flags);
- continue;
- }
- if (usb_pipein(urb->pipe)) {
-
- /* Sanity check. */
- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- if (urb_priv->urb_state == NOT_STARTED) {
-
- /* If ASAP is not set and urb->start_frame is the current frame,
- start the transfer. */
- if (!(urb->transfer_flags & URB_ISO_ASAP) &&
- (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
-
- dbg_isoc("Enabling isoc IN EP descr for epid %d", epid);
- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-
- /* This urb is now active. */
- urb_priv->urb_state = STARTED;
- continue;
- }
- }
- }
- restore_flags(flags);
- }
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_bulk_eot_interrupt(int timer_induced)
-{
- int epid;
-
- /* The technique is to run one urb at a time, wait for the eot interrupt at which
- point the EP descriptor has been disabled. */
-
- DBFENTER;
- dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : "");
-
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-
- if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
- (TxBulkEPList[epid].sub != 0)) {
-
- struct urb *urb;
- etrax_urb_priv_t *urb_priv;
- unsigned long flags;
- __u32 r_usb_ept_data;
-
- /* Found a disabled EP descriptor which has a non-null sub pointer.
- Verify that this ctrl EP descriptor got disabled no errors.
- FIXME: Necessary to check error_code? */
- dbg_bulk("for epid %d?", epid);
-
- /* Get the first urb. */
- urb = urb_list_first(epid);
-
- /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of
- wrong unlinking? */
- if (!urb) {
- warn("NULL urb for epid %d", epid);
- continue;
- }
-
- assert(urb);
- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
- assert(urb_priv);
-
- /* Sanity checks. */
- assert(usb_pipetype(urb->pipe) == PIPE_BULK);
- if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
- err("bulk endpoint got disabled before reaching last sb");
- }
-
- /* For bulk IN traffic, there seems to be a race condition between
- between the bulk eot and eop interrupts, or rather an uncertainty regarding
- the order in which they happen. Normally we expect the eop interrupt from
- DMA channel 9 to happen before the eot interrupt.
-
- Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */
-
- if (usb_pipein(urb->pipe)) {
- dbg_bulk("in urb, continuing");
- continue;
- }
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) ==
- IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
- /* This means that the endpoint has no error, is disabled
- and had inserted traffic, i.e. transfer successfully completed. */
- etrax_usb_complete_bulk_urb(urb, 0);
- } else {
- /* Shouldn't happen. We expect errors to be caught by epid attention. */
- err("Found disabled bulk EP desc, error_code != no_error");
- }
- }
- }
-
- /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer.
- However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may
- not. Also, we might find two disabled EPs when handling an eot interrupt, and then find
- none the next time. */
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg)
-{
- /* This function handles the epid attention interrupt. There are a variety of reasons
- for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details):
-
- invalid ep_id - Invalid epid in an EP (EP disabled).
- stall - Not strictly an error condition (EP disabled).
- 3rd error - Three successive transaction errors (EP disabled).
- buffer ourun - Buffer overrun or underrun (EP disabled).
- past eof1 - Intr or isoc transaction proceeds past EOF1.
- near eof - Intr or isoc transaction would not fit inside the frame.
- zout transfer - If zout transfer for a bulk endpoint (EP disabled).
- setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */
-
- int epid;
-
-
- DBFENTER;
-
- assert(reg != NULL);
-
- /* Note that we loop through all epids. We still want to catch errors for
- the invalid one, even though we might handle them differently. */
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-
- if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
-
- struct urb *urb;
- __u32 r_usb_ept_data;
- unsigned long flags;
- int error_code;
-
- save_flags(flags);
- cli();
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
- nop();
- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
- registers, they are located at the same address and are of the same size.
- In other words, this read should be ok for isoc also. */
- r_usb_ept_data = *R_USB_EPT_DATA;
- restore_flags(flags);
-
- /* First some sanity checks. */
- if (epid == INVALID_EPID) {
- /* FIXME: What if it became disabled? Could seriously hurt interrupt
- traffic. (Use do_intr_recover.) */
- warn("Got epid_attn for INVALID_EPID (%d).", epid);
- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
- continue;
- } else if (epid == DUMMY_EPID) {
- /* We definitely don't care about these ones. Besides, they are
- always disabled, so any possible disabling caused by the
- epid attention interrupt is irrelevant. */
- warn("Got epid_attn for DUMMY_EPID (%d).", epid);
- continue;
- }
-
- /* Get the first urb in the urb list for this epid. We blatantly assume
- that only the first urb could have caused the epid attention.
- (For bulk and ctrl, only one urb is active at any one time. For intr
- and isoc we remove them once they are completed.) */
- urb = urb_list_first(epid);
-
- if (urb == NULL) {
- err("Got epid_attn for epid %i with no urb.", epid);
- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
- continue;
- }
-
- switch (usb_pipetype(urb->pipe)) {
- case PIPE_BULK:
- warn("Got epid attn for bulk endpoint, epid %d", epid);
- break;
- case PIPE_CONTROL:
- warn("Got epid attn for control endpoint, epid %d", epid);
- break;
- case PIPE_INTERRUPT:
- warn("Got epid attn for interrupt endpoint, epid %d", epid);
- break;
- case PIPE_ISOCHRONOUS:
- warn("Got epid attn for isochronous endpoint, epid %d", epid);
- break;
- }
-
- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
- warn("Hold was set for epid %d.", epid);
- continue;
- }
- }
-
- /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and
- R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
- } else {
- error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data);
- }
-
- /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-
- /* Isoc traffic doesn't have error_count_in/error_count_out. */
- if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
- (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 ||
- IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) {
- /* 3rd error. */
- warn("3rd error for epid %i", epid);
- etrax_usb_complete_urb(urb, -EPROTO);
-
- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-
- warn("Perror for epid %d", epid);
-
- if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
- /* invalid ep_id */
- panic("Perror because of invalid epid."
- " Deconfigured too early?");
- } else {
- /* past eof1, near eof, zout transfer, setup transfer */
-
- /* Dump the urb and the relevant EP descriptor list. */
-
- __dump_urb(urb);
- __dump_ept_data(epid);
- __dump_ep_list(usb_pipetype(urb->pipe));
-
- panic("Something wrong with DMA descriptor contents."
- " Too much traffic inserted?");
- }
- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
- /* buffer ourun */
- panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
- }
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) {
- /* Not really a protocol error, just says that the endpoint gave
- a stall response. Note that error_code cannot be stall for isoc. */
- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
- panic("Isoc traffic cannot stall");
- }
-
- warn("Stall for epid %d", epid);
- etrax_usb_complete_urb(urb, -EPIPE);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) {
- /* Two devices responded to a transaction request. Must be resolved
- by software. FIXME: Reset ports? */
- panic("Bus error for epid %d."
- " Two devices responded to transaction request",
- epid);
-
- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
- /* DMA overrun or underrun. */
- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
-
- /* It seems that error_code = buffer_error in
- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
- are the same error. */
- etrax_usb_complete_urb(urb, -EPROTO);
- }
- }
- }
-
- DBFEXIT;
-
-}
-
-void etrax_usb_bulk_start_timer_func(unsigned long dummy)
-{
-
- /* We might enable an EP descriptor behind the current DMA position when it's about
- to decide that there are no more bulk traffic and it should stop the bulk channel.
- Therefore we periodically check if the bulk channel is stopped and there is an
- enabled bulk EP descriptor, in which case we start the bulk channel. */
- dbg_bulk("bulk_start_timer timed out.");
-
- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
- int epid;
-
- dbg_bulk("Bulk DMA channel not running.");
-
- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
- dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n",
- epid);
- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-
- /* Restart the bulk eot timer since we just started the bulk channel. */
- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-
- /* No need to search any further. */
- break;
- }
- }
- } else {
- dbg_bulk("Bulk DMA channel running.");
- }
-}
-
-void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg)
-{
- etrax_hc_t *hc = reg->hc;
- __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1;
- __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2;
-
- DBFENTER;
-
- /* The Etrax RH does not include a wPortChange register, so this has to be handled in software
- (by saving the old port status value for comparison when the port status interrupt happens).
- See section 11.16.2.6.2 in the USB 1.1 spec for details. */
-
- dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1);
- dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2);
- dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1);
- dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2);
-
- /* C_PORT_CONNECTION is set on any transition. */
- hc->rh.wPortChange_1 |=
- ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) !=
- (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ?
- (1 << RH_PORT_CONNECTION) : 0;
-
- hc->rh.wPortChange_2 |=
- ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) !=
- (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ?
- (1 << RH_PORT_CONNECTION) : 0;
-
- /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when
- the port is disabled, not when it's enabled. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ?
- (1 << RH_PORT_ENABLE) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ?
- (1 << RH_PORT_ENABLE) : 0;
-
- /* C_PORT_SUSPEND is set to one when the device has transitioned out
- of the suspended state, i.e. when suspend goes from one to zero. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ?
- (1 << RH_PORT_SUSPEND) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ?
- (1 << RH_PORT_SUSPEND) : 0;
-
-
- /* C_PORT_RESET is set when reset processing on this port is complete. */
- hc->rh.wPortChange_1 |=
- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET))
- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ?
- (1 << RH_PORT_RESET) : 0;
-
- hc->rh.wPortChange_2 |=
- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET))
- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ?
- (1 << RH_PORT_RESET) : 0;
-
- /* Save the new values for next port status change. */
- hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1;
- hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2;
-
- dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1);
- dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2);
-
- DBFEXIT;
-
-}
-
-void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg)
-{
- DBFENTER;
-
- /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
- list for the corresponding epid? */
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
- panic("USB controller got ourun.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-
- /* Before, etrax_usb_do_intr_recover was called on this epid if it was
- an interrupt pipe. I don't see how re-enabling all EP descriptors
- will help if there was a programming error. */
- panic("USB controller got perror.");
- }
-
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
- /* We should never operate in device mode. */
- panic("USB controller in device mode.");
- }
-
- /* These if-statements could probably be nested. */
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) {
- info("USB controller in host mode.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) {
- info("USB controller started.");
- }
- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) {
- info("USB controller running.");
- }
-
- DBFEXIT;
-
-}
-
-
-static int etrax_rh_submit_urb(struct urb *urb)
-{
- struct usb_device *usb_dev = urb->dev;
- etrax_hc_t *hc = usb_dev->bus->hcpriv;
- unsigned int pipe = urb->pipe;
- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
- void *data = urb->transfer_buffer;
- int leni = urb->transfer_buffer_length;
- int len = 0;
- int stat = 0;
-
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
- DBFENTER;
-
- /* FIXME: What is this interrupt urb that is sent to the root hub? */
- if (usb_pipetype (pipe) == PIPE_INTERRUPT) {
- dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval);
- hc->rh.urb = urb;
- hc->rh.send = 1;
- /* FIXME: We could probably remove this line since it's done
- in etrax_rh_init_int_timer. (Don't remove it from
- etrax_rh_init_int_timer though.) */
- hc->rh.interval = urb->interval;
- etrax_rh_init_int_timer(urb);
- DBFEXIT;
-
- return 0;
- }
-
- bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8);
- wValue = le16_to_cpu(cmd->wValue);
- wIndex = le16_to_cpu(cmd->wIndex);
- wLength = le16_to_cpu(cmd->wLength);
-
- dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq);
- dbg_rh("wValue : 0x%04x (%d)", wValue, wValue);
- dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex);
- dbg_rh("wLength : 0x%04x (%d)", wLength, wLength);
-
- switch (bmRType_bReq) {
-
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data = cpu_to_le16 (1);
- OK (2);
-
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data = cpu_to_le16 (0);
- OK (2);
-
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data = cpu_to_le16 (0);
- OK (2);
-
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data = cpu_to_le32 (0);
- OK (4); /* hub power ** */
-
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- if (wIndex == 1) {
- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1);
- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1);
- } else if (wIndex == 2) {
- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2);
- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2);
- } else {
- dbg_rh("RH_GET_STATUS whith invalid wIndex!");
- OK(0);
- }
-
- OK(4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL):
- OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case (RH_C_HUB_OVER_CURRENT):
- OK (0); /* hub power over current ** */
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- if (wIndex == 1) {
-
- dbg_rh("trying to do disable port 1");
-
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-
- while (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes));
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
- dbg_rh("Port 1 is disabled");
-
- } else if (wIndex == 2) {
-
- dbg_rh("trying to do disable port 2");
-
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
-
- while (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes));
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
- dbg_rh("Port 2 is disabled");
-
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_SUSPEND):
- /* Opposite to suspend should be resume, so we'll do a resume. */
- /* FIXME: USB 1.1, 11.16.2.2 says:
- "Clearing the PORT_SUSPEND feature causes a host-initiated resume
- on the specified port. If the port is not in the Suspended state,
- the hub should treat this request as a functional no-operation."
- Shouldn't we check if the port is in a suspended state before
- resuming? */
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- if (wIndex == 1) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else if (wIndex == 2) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_POWER):
- OK (0); /* port power ** */
- case (RH_C_PORT_CONNECTION):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_C_PORT_ENABLE):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE "
- "with invalid wIndex == %d!", wIndex);
- }
- OK (0);
- case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
- OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- OK (0); /* port power over current ** */
- case (RH_C_PORT_RESET):
- if (wIndex == 1) {
- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET);
- } else if (wIndex == 2) {
- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET);
- } else {
- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET "
- "with invalid index == %d!", wIndex);
- }
-
- OK (0);
-
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- if (wIndex == 1) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else if (wIndex == 2) {
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
- } else {
- dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND "
- "with invalid wIndex == %d!", wIndex);
- }
-
- OK (0);
- case (RH_PORT_RESET):
- if (wIndex == 1) {
-
- port_1_reset:
- dbg_rh("Doing reset of port 1");
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port1) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-
- /* We must wait at least 10 ms for the device to recover.
- 15 ms should be enough. */
- udelay(15000);
-
- /* Wait for reset bit to go low (should be done by now). */
- while (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes));
-
- /* If the port status is
- 1) connected and enabled then there is a device and everything is fine
- 2) neither connected nor enabled then there is no device, also fine
- 3) connected and not enabled then we try again
- (Yes, there are other port status combinations besides these.) */
-
- if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
- dbg_rh("Connected device on port 1, but port not enabled?"
- " Trying reset again.");
- goto port_2_reset;
- }
-
- /* Diagnostic printouts. */
- if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
- dbg_rh("No connected device on port 1");
- } else if ((hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
- (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) {
- dbg_rh("Connected device on port 1, port 1 enabled");
- }
-
- } else if (wIndex == 2) {
-
- port_2_reset:
- dbg_rh("Doing reset of port 2");
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Issue the reset command. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, port2) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-
- /* We must wait at least 10 ms for the device to recover.
- 15 ms should be enough. */
- udelay(15000);
-
- /* Wait for reset bit to go low (should be done by now). */
- while (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes));
-
- /* If the port status is
- 1) connected and enabled then there is a device and everything is fine
- 2) neither connected nor enabled then there is no device, also fine
- 3) connected and not enabled then we try again
- (Yes, there are other port status combinations besides these.) */
-
- if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
- dbg_rh("Connected device on port 2, but port not enabled?"
- " Trying reset again.");
- goto port_2_reset;
- }
-
- /* Diagnostic printouts. */
- if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
- dbg_rh("No connected device on port 2");
- } else if ((hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
- (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) {
- dbg_rh("Connected device on port 2, port 2 enabled");
- }
-
- } else {
- dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex);
- }
-
- /* Make sure the controller isn't busy. */
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* If all enabled ports were disabled the host controller goes down into
- started mode, so we need to bring it back into the running state.
- (This is safe even if it's already in the running state.) */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-
- dbg_rh("...Done");
- OK(0);
-
- case (RH_PORT_POWER):
- OK (0); /* port power ** */
- case (RH_PORT_ENABLE):
- /* There is no port enable command in the host controller, so if the
- port is already enabled, we do nothing. If not, we reset the port
- (with an ugly goto). */
-
- if (wIndex == 1) {
- if (hc->rh.prev_wPortStatus_1 &
- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) {
- goto port_1_reset;
- }
- } else if (wIndex == 2) {
- if (hc->rh.prev_wPortStatus_2 &
- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) {
- goto port_2_reset;
- }
- } else {
- dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex);
- }
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS:
- hc->rh.devnum = wValue;
- dbg_rh("RH address set to: %d", hc->rh.devnum);
- OK (0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength));
- memcpy (data, root_hub_dev_des, len);
- OK (len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength));
- memcpy (data, root_hub_config_des, len);
- OK (len);
- case (0x03): /* string descriptors */
- len = usb_root_hub_string (wValue & 0xff,
- 0xff, "ETRAX 100LX",
- data, wLength);
- if (len > 0) {
- OK(min(leni, len));
- } else {
- stat = -EPIPE;
- }
-
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- root_hub_hub_des[2] = hc->rh.numports;
- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength));
- memcpy (data, root_hub_hub_des, len);
- OK (len);
-
- case RH_GET_CONFIGURATION:
- *(__u8 *) data = 0x01;
- OK (1);
-
- case RH_SET_CONFIGURATION:
- OK (0);
-
- default:
- stat = -EPIPE;
- }
-
- urb->actual_length = len;
- urb->status = stat;
- urb->dev = NULL;
- if (urb->complete) {
- urb->complete(urb, NULL);
- }
- DBFEXIT;
-
- return 0;
-}
-
-static void
-etrax_usb_bulk_eot_timer_func(unsigned long dummy)
-{
- /* Because of a race condition in the top half, we might miss a bulk eot.
- This timer "simulates" a bulk eot if we don't get one for a while, hopefully
- correcting the situation. */
- dbg_bulk("bulk_eot_timer timed out.");
- etrax_usb_hc_bulk_eot_interrupt(1);
-}
-
-static void*
-etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
- unsigned mem_flags, dma_addr_t *dma)
-{
- return kmalloc(size, mem_flags);
-}
-
-static void
-etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma)
-{
- kfree(addr);
-}
-
-
-static struct device fake_device;
-
-static int __init etrax_usb_hc_init(void)
-{
- static etrax_hc_t *hc;
- struct usb_bus *bus;
- struct usb_device *usb_rh;
- int i;
-
- DBFENTER;
-
- info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version);
-
- hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL);
- assert(hc != NULL);
-
- /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
- /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate
- SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) ==
- sizeof(USB_SB_Desc_t). */
-
- usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0,
- SLAB_HWCACHE_ALIGN, 0, 0);
- assert(usb_desc_cache != NULL);
-
- top_half_reg_cache = kmem_cache_create("top_half_reg_cache",
- sizeof(usb_interrupt_registers_t),
- 0, SLAB_HWCACHE_ALIGN, 0, 0);
- assert(top_half_reg_cache != NULL);
-
- isoc_compl_cache = kmem_cache_create("isoc_compl_cache",
- sizeof(usb_isoc_complete_data_t),
- 0, SLAB_HWCACHE_ALIGN, 0, 0);
- assert(isoc_compl_cache != NULL);
-
- etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations);
- hc->bus = bus;
- bus->bus_name="ETRAX 100LX";
- bus->hcpriv = hc;
-
- /* Initialize RH to the default address.
- And make sure that we have no status change indication */
- hc->rh.numports = 2; /* The RH has two ports */
- hc->rh.devnum = 1;
- hc->rh.wPortChange_1 = 0;
- hc->rh.wPortChange_2 = 0;
-
- /* Also initate the previous values to zero */
- hc->rh.prev_wPortStatus_1 = 0;
- hc->rh.prev_wPortStatus_2 = 0;
-
- /* Initialize the intr-traffic flags */
- /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */
- hc->intr.sleeping = 0;
- hc->intr.wq = NULL;
-
- epid_usage_bitmask = 0;
- epid_out_traffic = 0;
-
- /* Mark the invalid epid as being used. */
- set_bit(INVALID_EPID, (void *)&epid_usage_bitmask);
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID);
- nop();
- /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */
- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) |
- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
-
- /* Mark the dummy epid as being used. */
- set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask);
- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID);
- nop();
- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) |
- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
-
- /* Initialize the urb list by initiating a head for each list. */
- for (i = 0; i < NBR_OF_EPIDS; i++) {
- INIT_LIST_HEAD(&urb_list[i]);
- }
- spin_lock_init(&urb_list_lock);
-
- INIT_LIST_HEAD(&urb_unlink_list);
-
-
- /* Initiate the bulk start timer. */
- init_timer(&bulk_start_timer);
- bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
- bulk_start_timer.function = etrax_usb_bulk_start_timer_func;
- add_timer(&bulk_start_timer);
-
-
- /* Initiate the bulk eot timer. */
- init_timer(&bulk_eot_timer);
- bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
- bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func;
- add_timer(&bulk_eot_timer);
-
- /* Set up the data structures for USB traffic. Note that this must be done before
- any interrupt that relies on sane DMA list occurrs. */
- init_rx_buffers();
- init_tx_bulk_ep();
- init_tx_ctrl_ep();
- init_tx_intr_ep();
- init_tx_isoc_ep();
-
- device_initialize(&fake_device);
- kobject_set_name(&fake_device.kobj, "etrax_usb");
- kobject_add(&fake_device.kobj);
- kobject_uevent(&fake_device.kobj, KOBJ_ADD);
- hc->bus->controller = &fake_device;
- usb_register_bus(hc->bus);
-
- *R_IRQ_MASK2_SET =
- /* Note that these interrupts are not used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
- /* Sub channel 1 (ctrl) descr. interrupts are used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
- /* Sub channel 3 (isoc) descr. interrupts are used. */
- IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
-
- /* Note that the dma9_descr interrupt is not used. */
- *R_IRQ_MASK2_SET =
- IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
- IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
-
- /* FIXME: Enable iso_eof only when isoc traffic is running. */
- *R_USB_IRQ_MASK_SET =
- IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
- IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
-
-
- if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0,
- "ETRAX 100LX built-in USB (HC)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0,
- "ETRAX 100LX built-in USB (Rx)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0,
- "ETRAX 100LX built-in USB (Tx)", hc)) {
- err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
- etrax_usb_hc_cleanup();
- DBFEXIT;
- return -1;
- }
-
- /* R_USB_COMMAND:
- USB commands in host mode. The fields in this register should all be
- written to in one write. Do not read-modify-write one field at a time. A
- write to this register will trigger events in the USB controller and an
- incomplete command may lead to unpredictable results, and in worst case
- even to a deadlock in the controller.
- (Note however that the busy field is read-only, so no need to write to it.) */
-
- /* Check the busy bit before writing to R_USB_COMMAND. */
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Reset the USB interface. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-
- /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800),
- to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may
- allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation.
-
- While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK
- behaviour, it doesn't solve this problem. What happens is that a control transfer will not
- be interrupted in its data stage when PSTART happens (the point at which periodic traffic
- is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before
- PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done,
- there may be too little time left for an isochronous transfer, causing an epid attention
- interrupt due to perror. The work-around for this is to let the control transfers run at the
- end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't
- fit into the frame. However, since there will *always* be a control transfer at the beginning
- of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer
- which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to
- this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make
- sure that the periodic transfers that are inserted will always fit in the frame.
-
- The idea was suggested that a control transfer could be split up into several 8 byte transfers,
- so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this
- hasn't been implemented.
-
- The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra
- for possible bit stuffing. */
-
- *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
-
-#ifdef CONFIG_ETRAX_USB_HOST_PORT1
- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-#endif
-
-#ifdef CONFIG_ETRAX_USB_HOST_PORT2
- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
-#endif
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Configure the USB interface as a host controller. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
-
- /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled
- sequence of resetting the ports. If we reset both ports now, and there are devices
- on both ports, we will get a bus error because both devices will answer the set address
- request. */
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- /* Start processing of USB traffic. */
- *R_USB_COMMAND =
- IO_STATE(R_USB_COMMAND, port_sel, nop) |
- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-
- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
-
- usb_rh = usb_alloc_dev(NULL, hc->bus, 0);
- hc->bus->root_hub = usb_rh;
- usb_rh->state = USB_STATE_ADDRESS;
- usb_rh->speed = USB_SPEED_FULL;
- usb_rh->devnum = 1;
- hc->bus->devnum_next = 2;
- usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64);
- usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE);
- usb_new_device(usb_rh);
-
- DBFEXIT;
-
- return 0;
-}
-
-static void etrax_usb_hc_cleanup(void)
-{
- DBFENTER;
-
- free_irq(ETRAX_USB_HC_IRQ, NULL);
- free_irq(ETRAX_USB_RX_IRQ, NULL);
- free_irq(ETRAX_USB_TX_IRQ, NULL);
-
- usb_deregister_bus(etrax_usb_bus);
-
- /* FIXME: call kmem_cache_destroy here? */
-
- DBFEXIT;
-}
-
-module_init(etrax_usb_hc_init);
-module_exit(etrax_usb_hc_cleanup);
diff --git a/drivers/usb/host/hc_crisv10.h b/drivers/usb/host/hc_crisv10.h
deleted file mode 100644
index 62f77111d418..000000000000
--- a/drivers/usb/host/hc_crisv10.h
+++ /dev/null
@@ -1,289 +0,0 @@
-#ifndef __LINUX_ETRAX_USB_H
-#define __LINUX_ETRAX_USB_H
-
-#include <linux/types.h>
-#include <linux/list.h>
-
-typedef struct USB_IN_Desc {
- volatile __u16 sw_len;
- volatile __u16 command;
- volatile unsigned long next;
- volatile unsigned long buf;
- volatile __u16 hw_len;
- volatile __u16 status;
-} USB_IN_Desc_t;
-
-typedef struct USB_SB_Desc {
- volatile __u16 sw_len;
- volatile __u16 command;
- volatile unsigned long next;
- volatile unsigned long buf;
- __u32 dummy;
-} USB_SB_Desc_t;
-
-typedef struct USB_EP_Desc {
- volatile __u16 hw_len;
- volatile __u16 command;
- volatile unsigned long sub;
- volatile unsigned long next;
- __u32 dummy;
-} USB_EP_Desc_t;
-
-struct virt_root_hub {
- int devnum;
- void *urb;
- void *int_addr;
- int send;
- int interval;
- int numports;
- struct timer_list rh_int_timer;
- volatile __u16 wPortChange_1;
- volatile __u16 wPortChange_2;
- volatile __u16 prev_wPortStatus_1;
- volatile __u16 prev_wPortStatus_2;
-};
-
-struct etrax_usb_intr_traffic {
- int sleeping;
- int error;
- struct wait_queue *wq;
-};
-
-typedef struct etrax_usb_hc {
- struct usb_bus *bus;
- struct virt_root_hub rh;
- struct etrax_usb_intr_traffic intr;
-} etrax_hc_t;
-
-typedef enum {
- STARTED,
- NOT_STARTED,
- UNLINK,
- TRANSFER_DONE,
- WAITING_FOR_DESCR_INTR
-} etrax_usb_urb_state_t;
-
-
-
-typedef struct etrax_usb_urb_priv {
- /* The first_sb field is used for freeing all SB descriptors belonging
- to an urb. The corresponding ep descriptor's sub pointer cannot be
- used for this since the DMA advances the sub pointer as it processes
- the sb list. */
- USB_SB_Desc_t *first_sb;
- /* The last_sb field referes to the last SB descriptor that belongs to
- this urb. This is important to know so we can free the SB descriptors
- that ranges between first_sb and last_sb. */
- USB_SB_Desc_t *last_sb;
-
- /* The rx_offset field is used in ctrl and bulk traffic to keep track
- of the offset in the urb's transfer_buffer where incoming data should be
- copied to. */
- __u32 rx_offset;
-
- /* Counter used in isochronous transfers to keep track of the
- number of packets received/transmitted. */
- __u32 isoc_packet_counter;
-
- /* This field is used to pass information about the urb's current state between
- the various interrupt handlers (thus marked volatile). */
- volatile etrax_usb_urb_state_t urb_state;
-
- /* Connection between the submitted urb and ETRAX epid number */
- __u8 epid;
-
- /* The rx_data_list field is used for periodic traffic, to hold
- received data for later processing in the the complete_urb functions,
- where the data us copied to the urb's transfer_buffer. Basically, we
- use this intermediate storage because we don't know when it's safe to
- reuse the transfer_buffer (FIXME?). */
- struct list_head rx_data_list;
-} etrax_urb_priv_t;
-
-/* This struct is for passing data from the top half to the bottom half. */
-typedef struct usb_interrupt_registers
-{
- etrax_hc_t *hc;
- __u32 r_usb_epid_attn;
- __u8 r_usb_status;
- __u16 r_usb_rh_port_status_1;
- __u16 r_usb_rh_port_status_2;
- __u32 r_usb_irq_mask_read;
- __u32 r_usb_fm_number;
- struct work_struct usb_bh;
-} usb_interrupt_registers_t;
-
-/* This struct is for passing data from the isoc top half to the isoc bottom half. */
-typedef struct usb_isoc_complete_data
-{
- struct urb *urb;
- struct work_struct usb_bh;
-} usb_isoc_complete_data_t;
-
-/* This struct holds data we get from the rx descriptors for DMA channel 9
- for periodic traffic (intr and isoc). */
-typedef struct rx_data
-{
- void *data;
- int length;
- struct list_head list;
-} rx_data_t;
-
-typedef struct urb_entry
-{
- struct urb *urb;
- struct list_head list;
-} urb_entry_t;
-
-/* ---------------------------------------------------------------------------
- Virtual Root HUB
- ------------------------------------------------------------------------- */
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP 0x00
-
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* Field definitions for */
-
-#define USB_IN_command__eol__BITNR 0 /* command macros */
-#define USB_IN_command__eol__WIDTH 1
-#define USB_IN_command__eol__no 0
-#define USB_IN_command__eol__yes 1
-
-#define USB_IN_command__intr__BITNR 3
-#define USB_IN_command__intr__WIDTH 1
-#define USB_IN_command__intr__no 0
-#define USB_IN_command__intr__yes 1
-
-#define USB_IN_status__eop__BITNR 1 /* status macros. */
-#define USB_IN_status__eop__WIDTH 1
-#define USB_IN_status__eop__no 0
-#define USB_IN_status__eop__yes 1
-
-#define USB_IN_status__eot__BITNR 5
-#define USB_IN_status__eot__WIDTH 1
-#define USB_IN_status__eot__no 0
-#define USB_IN_status__eot__yes 1
-
-#define USB_IN_status__error__BITNR 6
-#define USB_IN_status__error__WIDTH 1
-#define USB_IN_status__error__no 0
-#define USB_IN_status__error__yes 1
-
-#define USB_IN_status__nodata__BITNR 7
-#define USB_IN_status__nodata__WIDTH 1
-#define USB_IN_status__nodata__no 0
-#define USB_IN_status__nodata__yes 1
-
-#define USB_IN_status__epid__BITNR 8
-#define USB_IN_status__epid__WIDTH 5
-
-#define USB_EP_command__eol__BITNR 0
-#define USB_EP_command__eol__WIDTH 1
-#define USB_EP_command__eol__no 0
-#define USB_EP_command__eol__yes 1
-
-#define USB_EP_command__eof__BITNR 1
-#define USB_EP_command__eof__WIDTH 1
-#define USB_EP_command__eof__no 0
-#define USB_EP_command__eof__yes 1
-
-#define USB_EP_command__intr__BITNR 3
-#define USB_EP_command__intr__WIDTH 1
-#define USB_EP_command__intr__no 0
-#define USB_EP_command__intr__yes 1
-
-#define USB_EP_command__enable__BITNR 4
-#define USB_EP_command__enable__WIDTH 1
-#define USB_EP_command__enable__no 0
-#define USB_EP_command__enable__yes 1
-
-#define USB_EP_command__hw_valid__BITNR 5
-#define USB_EP_command__hw_valid__WIDTH 1
-#define USB_EP_command__hw_valid__no 0
-#define USB_EP_command__hw_valid__yes 1
-
-#define USB_EP_command__epid__BITNR 8
-#define USB_EP_command__epid__WIDTH 5
-
-#define USB_SB_command__eol__BITNR 0 /* command macros. */
-#define USB_SB_command__eol__WIDTH 1
-#define USB_SB_command__eol__no 0
-#define USB_SB_command__eol__yes 1
-
-#define USB_SB_command__eot__BITNR 1
-#define USB_SB_command__eot__WIDTH 1
-#define USB_SB_command__eot__no 0
-#define USB_SB_command__eot__yes 1
-
-#define USB_SB_command__intr__BITNR 3
-#define USB_SB_command__intr__WIDTH 1
-#define USB_SB_command__intr__no 0
-#define USB_SB_command__intr__yes 1
-
-#define USB_SB_command__tt__BITNR 4
-#define USB_SB_command__tt__WIDTH 2
-#define USB_SB_command__tt__zout 0
-#define USB_SB_command__tt__in 1
-#define USB_SB_command__tt__out 2
-#define USB_SB_command__tt__setup 3
-
-
-#define USB_SB_command__rem__BITNR 8
-#define USB_SB_command__rem__WIDTH 6
-
-#define USB_SB_command__full__BITNR 6
-#define USB_SB_command__full__WIDTH 1
-#define USB_SB_command__full__no 0
-#define USB_SB_command__full__yes 1
-
-#endif
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index f0d29eda3c6d..e8bbe8bc2598 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -486,9 +486,6 @@ static int ohci_run (struct ohci_hcd *ohci)
* or if bus glue did the same (e.g. for PCI add-in cards with
* PCI PM support).
*/
- ohci_dbg (ohci, "resetting from state '%s', control = 0x%x\n",
- hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
- ohci_readl (ohci, &ohci->regs->control));
if ((ohci->hc_control & OHCI_CTRL_RWC) != 0
&& !device_may_wakeup(hcd->self.controller))
device_init_wakeup(hcd->self.controller, 1);
@@ -744,9 +741,6 @@ static void ohci_stop (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
- hcfs2string (ohci->hc_control & OHCI_CTRL_HCFS),
- hcd->state);
ohci_dump (ohci, 1);
flush_scheduled_work();
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index b331ac4d0d62..79705609fd0c 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -20,10 +20,16 @@
/*-------------------------------------------------------------------------*/
+static int broken_suspend(struct usb_hcd *hcd)
+{
+ device_init_wakeup(&hcd->self.root_hub->dev, 0);
+ return 0;
+}
+
/* AMD 756, for most chips (early revs), corrupts register
* values on read ... so enable the vendor workaround.
*/
-static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd)
+static int ohci_quirk_amd756(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -31,16 +37,14 @@ static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd)
ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
/* also erratum 10 (suspend/resume issues) */
- device_init_wakeup(&hcd->self.root_hub->dev, 0);
-
- return 0;
+ return broken_suspend(hcd);
}
/* Apple's OHCI driver has a lot of bizarre workarounds
* for this chip. Evidently control and bulk lists
* can get confused. (B&W G3 models, and ...)
*/
-static int __devinit ohci_quirk_opti(struct usb_hcd *hcd)
+static int ohci_quirk_opti(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -53,7 +57,7 @@ static int __devinit ohci_quirk_opti(struct usb_hcd *hcd)
* identify the USB (fn2). This quirk might apply to more or
* even all NSC stuff.
*/
-static int __devinit ohci_quirk_ns(struct usb_hcd *hcd)
+static int ohci_quirk_ns(struct usb_hcd *hcd)
{
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
struct pci_dev *b;
@@ -75,7 +79,7 @@ static int __devinit ohci_quirk_ns(struct usb_hcd *hcd)
* delays before control or bulk queues get re-activated
* in finish_unlinks()
*/
-static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd)
+static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -88,7 +92,7 @@ static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd)
/* Check for Toshiba SCC OHCI which has big endian registers
* and little endian in memory data structures
*/
-static int __devinit ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
@@ -129,6 +133,18 @@ static const struct pci_device_id ohci_pci_quirks[] = {
PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
.driver_data = (unsigned long)ohci_quirk_toshiba_scc,
},
+ {
+ /* Toshiba portege 4000 */
+ .vendor = PCI_VENDOR_ID_AL,
+ .device = 0x5237,
+ .subvendor = PCI_VENDOR_ID_TOSHIBA_2,
+ .subdevice = 0x0004,
+ .driver_data = (unsigned long) broken_suspend,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
+ .driver_data = (unsigned long) broken_suspend,
+ },
/* FIXME for some of the early AMD 760 southbridges, OHCI
* won't work at all. blacklist them.
*/
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 19a0cc02b9a2..4aed305982ec 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -123,10 +123,14 @@ static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci)
static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td)
{
- if (!list_empty(&td->list))
+ if (!list_empty(&td->list)) {
dev_warn(uhci_dev(uhci), "td %p still in list!\n", td);
- if (!list_empty(&td->fl_list))
+ WARN_ON(1);
+ }
+ if (!list_empty(&td->fl_list)) {
dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td);
+ WARN_ON(1);
+ }
dma_pool_free(uhci->td_pool, td, td->dma_handle);
}
@@ -291,8 +295,10 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh)
{
WARN_ON(qh->state != QH_STATE_IDLE && qh->udev);
- if (!list_empty(&qh->queue))
+ if (!list_empty(&qh->queue)) {
dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh);
+ WARN_ON(1);
+ }
list_del(&qh->node);
if (qh->udev) {
@@ -740,9 +746,11 @@ static void uhci_free_urb_priv(struct uhci_hcd *uhci,
{
struct uhci_td *td, *tmp;
- if (!list_empty(&urbp->node))
+ if (!list_empty(&urbp->node)) {
dev_warn(uhci_dev(uhci), "urb %p still on QH's list!\n",
urbp->urb);
+ WARN_ON(1);
+ }
list_for_each_entry_safe(td, tmp, &urbp->td_list, list) {
uhci_remove_td_from_urbp(td);
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c
index 83f1f79db7c7..6459be90599c 100644
--- a/drivers/usb/input/ati_remote2.c
+++ b/drivers/usb/input/ati_remote2.c
@@ -2,6 +2,7 @@
* ati_remote2 - ATI/Philips USB RF remote driver
*
* Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi>
+ * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
@@ -11,13 +12,29 @@
#include <linux/usb/input.h>
#define DRIVER_DESC "ATI/Philips USB RF remote driver"
-#define DRIVER_VERSION "0.1"
+#define DRIVER_VERSION "0.2"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_VERSION(DRIVER_VERSION);
MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>");
MODULE_LICENSE("GPL");
+/*
+ * ATI Remote Wonder II Channel Configuration
+ *
+ * The remote control can by assigned one of sixteen "channels" in order to facilitate
+ * the use of multiple remote controls within range of each other.
+ * A remote's "channel" may be altered by pressing and holding the "PC" button for
+ * approximately 3 seconds, after which the button will slowly flash the count of the
+ * currently configured "channel", using the numeric keypad enter a number between 1 and
+ * 16 and then the "PC" button again, the button will slowly flash the count of the
+ * newly configured "channel".
+ */
+
+static unsigned int channel_mask = 0xFFFF;
+module_param(channel_mask, uint, 0644);
+MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>");
+
static unsigned int mode_mask = 0x1F;
module_param(mode_mask, uint, 0644);
MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>");
@@ -146,15 +163,23 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[0];
+ int channel, mode;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & channel_mask))
+ return;
- if (data[0] > 4) {
+ mode = data[0] & 0x0F;
+
+ if (mode > 4) {
dev_err(&ar2->intf[0]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
return;
}
- if (!((1 << data[0]) & mode_mask))
+ if (!((1 << mode) & mode_mask))
return;
input_event(idev, EV_REL, REL_X, (s8) data[1]);
@@ -177,9 +202,16 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
{
struct input_dev *idev = ar2->idev;
u8 *data = ar2->buf[1];
- int hw_code, index;
+ int channel, mode, hw_code, index;
+
+ channel = data[0] >> 4;
+
+ if (!((1 << channel) & channel_mask))
+ return;
- if (data[0] > 4) {
+ mode = data[0] & 0x0F;
+
+ if (mode > 4) {
dev_err(&ar2->intf[1]->dev,
"Unknown mode byte (%02x %02x %02x %02x)\n",
data[3], data[2], data[1], data[0]);
@@ -199,16 +231,16 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2)
* events for the mouse pad so we filter out any subsequent
* events from the same mode key.
*/
- if (ar2->mode == data[0])
+ if (ar2->mode == mode)
return;
if (data[1] == 0)
- ar2->mode = data[0];
+ ar2->mode = mode;
- hw_code |= data[0] << 8;
+ hw_code |= mode << 8;
}
- if (!((1 << data[0]) & mode_mask))
+ if (!((1 << mode) & mode_mask))
return;
index = ati_remote2_lookup(hw_code);
@@ -379,6 +411,41 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
}
}
+static int ati_remote2_setup(struct ati_remote2 *ar2)
+{
+ int r, i, channel;
+
+ /*
+ * Configure receiver to only accept input from remote "channel"
+ * channel == 0 -> Accept input from any remote channel
+ * channel == 1 -> Only accept input from remote channel 1
+ * channel == 2 -> Only accept input from remote channel 2
+ * ...
+ * channel == 16 -> Only accept input from remote channel 16
+ */
+
+ channel = 0;
+ for (i = 0; i < 16; i++) {
+ if ((1 << i) & channel_mask) {
+ if (!(~(1 << i) & 0xFFFF & channel_mask))
+ channel = i + 1;
+ break;
+ }
+ }
+
+ r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0),
+ 0x20,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+ channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ if (r) {
+ dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
+ __FUNCTION__, r);
+ return r;
+ }
+
+ return 0;
+}
+
static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
@@ -409,6 +476,10 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d
if (r)
goto fail2;
+ r = ati_remote2_setup(ar2);
+ if (r)
+ goto fail2;
+
usb_make_path(udev, ar2->phys, sizeof(ar2->phys));
strlcat(ar2->phys, "/input0", sizeof(ar2->phys));
diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c
index 203cdc1bbba4..ae756e0afc99 100644
--- a/drivers/usb/input/gtco.c
+++ b/drivers/usb/input/gtco.c
@@ -1047,13 +1047,10 @@ static void gtco_disconnect(struct usb_interface *interface)
/* Grab private device ptr */
struct gtco *device = usb_get_intfdata (interface);
- struct input_dev *inputdev;
-
- inputdev = device->inputdevice;
/* Now reverse all the registration stuff */
if (device) {
- input_unregister_device(inputdev);
+ input_unregister_device(device->inputdevice);
usb_kill_urb(device->urbinfo);
usb_free_urb(device->urbinfo);
usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 75bfab95ab3c..77145f9db043 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -285,23 +285,24 @@ static int adu_open(struct inode *inode, struct file *file)
/* save device in the file's private structure */
file->private_data = dev;
- /* initialize in direction */
- dev->read_buffer_length = 0;
-
- /* fixup first read by having urb waiting for it */
- usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
- usb_rcvintpipe(dev->udev,
- dev->interrupt_in_endpoint->bEndpointAddress),
- dev->interrupt_in_buffer,
- le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
- adu_interrupt_in_callback, dev,
- dev->interrupt_in_endpoint->bInterval);
- /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
- dev->read_urb_finished = 0;
- usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
- /* we ignore failure */
- /* end of fixup for first read */
+ if (dev->open_count == 1) {
+ /* initialize in direction */
+ dev->read_buffer_length = 0;
+ /* fixup first read by having urb waiting for it */
+ usb_fill_int_urb(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
+ dev->interrupt_in_endpoint->bEndpointAddress),
+ dev->interrupt_in_buffer,
+ le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize),
+ adu_interrupt_in_callback, dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->read_urb_finished = 0;
+ retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ if (retval)
+ --dev->open_count;
+ }
up(&dev->sem);
exit_no_device:
@@ -469,7 +470,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count,
adu_interrupt_in_callback,
dev,
dev->interrupt_in_endpoint->bInterval);
- retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC);
if (!retval) {
spin_unlock_irqrestore(&dev->buflock, flags);
dbg(2," %s : submitted OK", __FUNCTION__);
@@ -539,7 +540,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
size_t bytes_written = 0;
size_t bytes_to_write;
size_t buffer_size;
- int retval = 0;
+ int retval;
int timeout = 0;
dbg(2," %s : enter, count = %Zd", __FUNCTION__, count);
@@ -547,7 +548,9 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
dev = file->private_data;
/* lock this object */
- down_interruptible(&dev->sem);
+ retval = down_interruptible(&dev->sem);
+ if (retval)
+ goto exit_nolock;
/* verify that the device wasn't unplugged */
if (dev->udev == NULL || dev->minor == 0) {
@@ -575,7 +578,11 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
}
up(&dev->sem);
timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout);
- down_interruptible(&dev->sem);
+ retval = down_interruptible(&dev->sem);
+ if (retval) {
+ retval = bytes_written ? bytes_written : retval;
+ goto exit_nolock;
+ }
if (timeout > 0) {
break;
}
@@ -637,6 +644,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer,
exit:
/* unlock the device */
up(&dev->sem);
+exit_nolock:
dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index b63b5f34b2aa..d721380b242d 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -246,11 +246,13 @@ static void cypress_disconnect(struct usb_interface *interface)
struct cypress *dev;
dev = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
/* remove device attribute files */
device_remove_file(&interface->dev, &dev_attr_port0);
device_remove_file(&interface->dev, &dev_attr_port1);
+ /* the intfdata can be set to NULL only after the
+ * device files have been removed */
+ usb_set_intfdata(interface, NULL);
usb_put_dev(dev->udev);
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index bc3327e3dd78..e2172e5cf152 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -2304,7 +2304,6 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi)
#define OHCI_QUIRK_SUPERIO 0x02
#define OHCI_QUIRK_INITRESET 0x04
#define OHCI_BIG_ENDIAN 0x08
-#define OHCI_QUIRK_ZFMICRO 0x10
#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
#define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \
OHCI_INTR_WDH)
@@ -2910,24 +2909,28 @@ static int __init ftdi_elan_init(void)
INIT_LIST_HEAD(&ftdi_static_list);
status_queue = create_singlethread_workqueue("ftdi-status-control");
if (!status_queue)
- goto err1;
+ goto err_status_queue;
command_queue = create_singlethread_workqueue("ftdi-command-engine");
if (!command_queue)
- goto err2;
+ goto err_command_queue;
respond_queue = create_singlethread_workqueue("ftdi-respond-engine");
if (!respond_queue)
- goto err3;
+ goto err_respond_queue;
result = usb_register(&ftdi_elan_driver);
- if (result)
+ if (result) {
+ destroy_workqueue(status_queue);
+ destroy_workqueue(command_queue);
+ destroy_workqueue(respond_queue);
printk(KERN_ERR "usb_register failed. Error number %d\n",
result);
+ }
return result;
- err3:
+ err_respond_queue:
destroy_workqueue(command_queue);
- err2:
+ err_command_queue:
destroy_workqueue(status_queue);
- err1:
+ err_status_queue:
printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name);
return -ENOMEM;
}
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index d69665c8de02..fc51207b71b8 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -118,7 +118,7 @@ static int usb_get_report(struct usb_device *dev,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE, (type << 8) + id,
inter->desc.bInterfaceNumber, buf, size,
- GET_TIMEOUT);
+ GET_TIMEOUT*HZ);
}
//#endif
@@ -133,7 +133,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->cur_altsetting->desc.bInterfaceNumber, buf,
- size, 1);
+ size, HZ);
}
/*---------------------*/
@@ -417,14 +417,14 @@ static ssize_t iowarrior_write(struct file *file,
if (!int_out_urb) {
retval = -ENOMEM;
dbg("%s Unable to allocate urb ", __func__);
- goto error;
+ goto error_no_urb;
}
buf = usb_buffer_alloc(dev->udev, dev->report_size,
GFP_KERNEL, &int_out_urb->transfer_dma);
if (!buf) {
retval = -ENOMEM;
dbg("%s Unable to allocate buffer ", __func__);
- goto error;
+ goto error_no_buffer;
}
usb_fill_int_urb(int_out_urb, dev->udev,
usb_sndintpipe(dev->udev,
@@ -459,7 +459,9 @@ static ssize_t iowarrior_write(struct file *file,
error:
usb_buffer_free(dev->udev, dev->report_size, buf,
int_out_urb->transfer_dma);
+error_no_buffer:
usb_free_urb(int_out_urb);
+error_no_urb:
atomic_dec(&dev->write_busy);
wake_up_interruptible(&dev->write_wait);
exit:
@@ -748,7 +750,6 @@ static int iowarrior_probe(struct usb_interface *interface,
struct usb_endpoint_descriptor *endpoint;
int i;
int retval = -ENOMEM;
- int idele = 0;
/* allocate memory for our device state and intialize it */
dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
@@ -824,11 +825,10 @@ static int iowarrior_probe(struct usb_interface *interface,
/* Set the idle timeout to 0, if this is interface 0 */
if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) {
- idele = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
- 0x0A,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
- 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
- dbg("idele = %d", idele);
+ usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ 0x0A,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0,
+ 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
/* allow device read and ioctl */
dev->present = 1;
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 788a11e6772f..11555bde655b 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -62,6 +62,8 @@
#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
+#define USB_VENDOR_ID_MICROCHIP 0x04d8
+#define USB_DEVICE_ID_PICDEM 0x000c
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define USB_LD_MINOR_BASE 0
@@ -89,6 +91,7 @@ static struct usb_device_id ld_usb_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
+ { USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICDEM) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, ld_usb_table);
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index ada2ebc464ae..887ef953f3d8 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -47,6 +47,7 @@ struct usb_lcd {
#define to_lcd_dev(d) container_of(d, struct usb_lcd, kref)
static struct usb_driver lcd_driver;
+static DEFINE_MUTEX(usb_lcd_open_mutex);
static void lcd_delete(struct kref *kref)
@@ -68,6 +69,7 @@ static int lcd_open(struct inode *inode, struct file *file)
subminor = iminor(inode);
+ mutex_lock(&usb_lcd_open_mutex);
interface = usb_find_interface(&lcd_driver, subminor);
if (!interface) {
err ("USBLCD: %s - error, can't find device for minor %d",
@@ -89,6 +91,7 @@ static int lcd_open(struct inode *inode, struct file *file)
file->private_data = dev;
exit:
+ mutex_unlock(&usb_lcd_open_mutex);
return retval;
}
@@ -347,7 +350,7 @@ static void lcd_disconnect(struct usb_interface *interface)
int minor = interface->minor;
/* prevent skel_open() from racing skel_disconnect() */
- lock_kernel();
+ mutex_lock(&usb_lcd_open_mutex);
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
@@ -355,7 +358,7 @@ static void lcd_disconnect(struct usb_interface *interface)
/* give back our minor */
usb_deregister_dev(interface, &lcd_class);
- unlock_kernel();
+ mutex_unlock(&usb_lcd_open_mutex);
/* decrement our usage count */
kref_put(&dev->kref, lcd_delete);
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index b2bedd974ac3..0af11a66207c 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -356,8 +356,10 @@ static inline char mon_bin_get_setup(unsigned char *setupb,
if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
return '-';
- if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)
+ if (urb->dev->bus->uses_dma &&
+ (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN);
+ }
if (urb->setup_packet == NULL)
return 'Z';
@@ -369,7 +371,8 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp,
unsigned int offset, struct urb *urb, unsigned int length)
{
- if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) {
+ if (urb->dev->bus->uses_dma &&
+ (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
mon_dmapeek_vec(rp, offset, urb->transfer_dma, length);
return 0;
}
@@ -440,7 +443,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
/* We use the fact that usb_pipein() returns 0x80 */
ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
ep->devnum = usb_pipedevice(urb->pipe);
- ep->busnum = rp->r.m_bus->u_bus->busnum;
+ ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->ts_sec = ts.tv_sec;
ep->ts_usec = ts.tv_usec;
@@ -500,7 +503,7 @@ static void mon_bin_error(void *data, struct urb *urb, int error)
/* We use the fact that usb_pipein() returns 0x80 */
ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
ep->devnum = usb_pipedevice(urb->pipe);
- ep->busnum = rp->r.m_bus->u_bus->busnum;
+ ep->busnum = urb->dev->bus->busnum;
ep->id = (unsigned long) urb;
ep->status = error;
@@ -515,7 +518,6 @@ static void mon_bin_error(void *data, struct urb *urb, int error)
static int mon_bin_open(struct inode *inode, struct file *file)
{
struct mon_bus *mbus;
- struct usb_bus *ubus;
struct mon_reader_bin *rp;
size_t size;
int rc;
@@ -525,7 +527,7 @@ static int mon_bin_open(struct inode *inode, struct file *file)
mutex_unlock(&mon_lock);
return -ENODEV;
}
- if ((ubus = mbus->u_bus) == NULL) {
+ if (mbus != &mon_bus0 && mbus->u_bus == NULL) {
printk(KERN_ERR TAG ": consistency error on open\n");
mutex_unlock(&mon_lock);
return -ENODEV;
diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c
index c9739e7b35e5..8a1df2c9c73e 100644
--- a/drivers/usb/mon/mon_main.c
+++ b/drivers/usb/mon/mon_main.c
@@ -16,8 +16,6 @@
#include "usb_mon.h"
#include "../core/hcd.h"
-static void mon_submit(struct usb_bus *ubus, struct urb *urb);
-static void mon_complete(struct usb_bus *ubus, struct urb *urb);
static void mon_stop(struct mon_bus *mbus);
static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus);
static void mon_bus_drop(struct kref *r);
@@ -25,6 +23,7 @@ static void mon_bus_init(struct usb_bus *ubus);
DEFINE_MUTEX(mon_lock);
+struct mon_bus mon_bus0; /* Pseudo bus meaning "all buses" */
static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */
/*
@@ -35,22 +34,19 @@ static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */
void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r)
{
unsigned long flags;
- struct usb_bus *ubus;
+ struct list_head *p;
spin_lock_irqsave(&mbus->lock, flags);
if (mbus->nreaders == 0) {
- ubus = mbus->u_bus;
- if (ubus->monitored) {
- /*
- * Something is really broken, refuse to go on and
- * possibly corrupt ops pointers or worse.
- */
- printk(KERN_ERR TAG ": bus %d is already monitored\n",
- ubus->busnum);
- spin_unlock_irqrestore(&mbus->lock, flags);
- return;
+ if (mbus == &mon_bus0) {
+ list_for_each (p, &mon_buses) {
+ struct mon_bus *m1;
+ m1 = list_entry(p, struct mon_bus, bus_link);
+ m1->u_bus->monitored = 1;
+ }
+ } else {
+ mbus->u_bus->monitored = 1;
}
- ubus->monitored = 1;
}
mbus->nreaders++;
list_add_tail(&r->r_link, &mbus->r_list);
@@ -80,77 +76,79 @@ void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r)
/*
*/
-static void mon_submit(struct usb_bus *ubus, struct urb *urb)
+static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb)
{
- struct mon_bus *mbus;
unsigned long flags;
struct list_head *pos;
struct mon_reader *r;
- mbus = ubus->mon_bus;
- if (mbus == NULL)
- goto out_unlocked;
-
spin_lock_irqsave(&mbus->lock, flags);
- if (mbus->nreaders == 0)
- goto out_locked;
-
mbus->cnt_events++;
list_for_each (pos, &mbus->r_list) {
r = list_entry(pos, struct mon_reader, r_link);
r->rnf_submit(r->r_data, urb);
}
-
spin_unlock_irqrestore(&mbus->lock, flags);
return;
+}
-out_locked:
- spin_unlock_irqrestore(&mbus->lock, flags);
-out_unlocked:
- return;
+static void mon_submit(struct usb_bus *ubus, struct urb *urb)
+{
+ struct mon_bus *mbus;
+
+ if ((mbus = ubus->mon_bus) != NULL)
+ mon_bus_submit(mbus, urb);
+ mon_bus_submit(&mon_bus0, urb);
}
/*
*/
-static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
+static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int error)
{
- struct mon_bus *mbus;
unsigned long flags;
struct list_head *pos;
struct mon_reader *r;
- mbus = ubus->mon_bus;
- if (mbus == NULL)
- goto out_unlocked;
-
spin_lock_irqsave(&mbus->lock, flags);
- if (mbus->nreaders == 0)
- goto out_locked;
-
mbus->cnt_events++;
list_for_each (pos, &mbus->r_list) {
r = list_entry(pos, struct mon_reader, r_link);
r->rnf_error(r->r_data, urb, error);
}
-
spin_unlock_irqrestore(&mbus->lock, flags);
return;
+}
-out_locked:
- spin_unlock_irqrestore(&mbus->lock, flags);
-out_unlocked:
- return;
+static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error)
+{
+ struct mon_bus *mbus;
+
+ if ((mbus = ubus->mon_bus) != NULL)
+ mon_bus_submit_error(mbus, urb, error);
+ mon_bus_submit_error(&mon_bus0, urb, error);
}
/*
*/
-static void mon_complete(struct usb_bus *ubus, struct urb *urb)
+static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb)
{
- struct mon_bus *mbus;
unsigned long flags;
struct list_head *pos;
struct mon_reader *r;
+ spin_lock_irqsave(&mbus->lock, flags);
+ mbus->cnt_events++;
+ list_for_each (pos, &mbus->r_list) {
+ r = list_entry(pos, struct mon_reader, r_link);
+ r->rnf_complete(r->r_data, urb);
+ }
+ spin_unlock_irqrestore(&mbus->lock, flags);
+}
+
+static void mon_complete(struct usb_bus *ubus, struct urb *urb)
+{
+ struct mon_bus *mbus;
+
mbus = ubus->mon_bus;
if (mbus == NULL) {
/*
@@ -162,13 +160,8 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb)
return;
}
- spin_lock_irqsave(&mbus->lock, flags);
- mbus->cnt_events++;
- list_for_each (pos, &mbus->r_list) {
- r = list_entry(pos, struct mon_reader, r_link);
- r->rnf_complete(r->r_data, urb);
- }
- spin_unlock_irqrestore(&mbus->lock, flags);
+ mon_bus_complete(mbus, urb);
+ mon_bus_complete(&mon_bus0, urb);
}
/* int (*unlink_urb) (struct urb *urb, int status); */
@@ -179,14 +172,26 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb)
static void mon_stop(struct mon_bus *mbus)
{
struct usb_bus *ubus = mbus->u_bus;
+ struct list_head *p;
- /*
- * A stop can be called for a dissolved mon_bus in case of
- * a reader staying across an rmmod foo_hcd.
- */
- if (ubus != NULL) {
- ubus->monitored = 0;
- mb();
+ if (mbus == &mon_bus0) {
+ list_for_each (p, &mon_buses) {
+ mbus = list_entry(p, struct mon_bus, bus_link);
+ /*
+ * We do not change nreaders here, so rely on mon_lock.
+ */
+ if (mbus->nreaders == 0 && (ubus = mbus->u_bus) != NULL)
+ ubus->monitored = 0;
+ }
+ } else {
+ /*
+ * A stop can be called for a dissolved mon_bus in case of
+ * a reader staying across an rmmod foo_hcd, so test ->u_bus.
+ */
+ if (mon_bus0.nreaders == 0 && (ubus = mbus->u_bus) != NULL) {
+ ubus->monitored = 0;
+ mb();
+ }
}
}
@@ -199,6 +204,10 @@ static void mon_stop(struct mon_bus *mbus)
static void mon_bus_add(struct usb_bus *ubus)
{
mon_bus_init(ubus);
+ mutex_lock(&mon_lock);
+ if (mon_bus0.nreaders != 0)
+ ubus->monitored = 1;
+ mutex_unlock(&mon_lock);
}
/*
@@ -250,12 +259,7 @@ static struct usb_mon_operations mon_ops_0 = {
static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus)
{
- /*
- * Never happens, but...
- */
if (ubus->monitored) {
- printk(KERN_ERR TAG ": bus %d is dissolved while monitored\n",
- ubus->busnum);
ubus->monitored = 0;
mb();
}
@@ -263,6 +267,8 @@ static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus)
ubus->mon_bus = NULL;
mbus->u_bus = NULL;
mb();
+
+ /* We want synchronize_irq() here, but that needs an argument. */
}
/*
@@ -295,9 +301,8 @@ static void mon_bus_init(struct usb_bus *ubus)
*/
mbus->u_bus = ubus;
ubus->mon_bus = mbus;
- mbus->uses_dma = ubus->uses_dma;
- mbus->text_inited = mon_text_add(mbus, ubus);
+ mbus->text_inited = mon_text_add(mbus, ubus->busnum);
// mon_bin_add(...)
mutex_lock(&mon_lock);
@@ -309,6 +314,18 @@ err_alloc:
return;
}
+static void mon_bus0_init(void)
+{
+ struct mon_bus *mbus = &mon_bus0;
+
+ kref_init(&mbus->ref);
+ spin_lock_init(&mbus->lock);
+ INIT_LIST_HEAD(&mbus->r_list);
+
+ mbus->text_inited = mon_text_add(mbus, 0);
+ // mbus->bin_inited = mon_bin_add(mbus, 0);
+}
+
/*
* Search a USB bus by number. Notice that USB bus numbers start from one,
* which we may later use to identify "all" with zero.
@@ -322,6 +339,9 @@ struct mon_bus *mon_bus_lookup(unsigned int num)
struct list_head *p;
struct mon_bus *mbus;
+ if (num == 0) {
+ return &mon_bus0;
+ }
list_for_each (p, &mon_buses) {
mbus = list_entry(p, struct mon_bus, bus_link);
if (mbus->u_bus->busnum == num) {
@@ -341,6 +361,8 @@ static int __init mon_init(void)
if ((rc = mon_bin_init()) != 0)
goto err_bin;
+ mon_bus0_init();
+
if (usb_mon_register(&mon_ops_0) != 0) {
printk(KERN_NOTICE TAG ": unable to register with the core\n");
rc = -ENODEV;
@@ -374,6 +396,7 @@ static void __exit mon_exit(void)
usb_mon_deregister();
mutex_lock(&mon_lock);
+
while (!list_empty(&mon_buses)) {
p = mon_buses.next;
mbus = list_entry(p, struct mon_bus, bus_link);
@@ -397,6 +420,11 @@ static void __exit mon_exit(void)
mon_dissolve(mbus, mbus->u_bus);
kref_put(&mbus->ref, mon_bus_drop);
}
+
+ mbus = &mon_bus0;
+ if (mbus->text_inited)
+ mon_text_del(mbus);
+
mutex_unlock(&mon_lock);
mon_text_exit();
diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c
index 494ee3b9a226..ec0cc51e39ac 100644
--- a/drivers/usb/mon/mon_text.c
+++ b/drivers/usb/mon/mon_text.c
@@ -31,9 +31,21 @@
* to a local DoS. But we have to keep to root in order to prevent
* password sniffing from HID devices.
*/
-#define EVENT_MAX (2*PAGE_SIZE / sizeof(struct mon_event_text))
+#define EVENT_MAX (4*PAGE_SIZE / sizeof(struct mon_event_text))
-#define PRINTF_DFL 160
+/*
+ * Potentially unlimited number; we limit it for similar allocations.
+ * The usbfs limits this to 128, but we're not quite as generous.
+ */
+#define ISODESC_MAX 5
+
+#define PRINTF_DFL 250 /* with 5 ISOs segs */
+
+struct mon_iso_desc {
+ int status;
+ unsigned int offset;
+ unsigned int length; /* Unsigned here, signed in URB. Historic. */
+};
struct mon_event_text {
struct list_head e_link;
@@ -41,10 +53,16 @@ struct mon_event_text {
unsigned int pipe; /* Pipe */
unsigned long id; /* From pointer, most of the time */
unsigned int tstamp;
+ int busnum;
int length; /* Depends on type: xfer length or act length */
int status;
+ int interval;
+ int start_frame;
+ int error_count;
char setup_flag;
char data_flag;
+ int numdesc; /* Full number */
+ struct mon_iso_desc isodesc[ISODESC_MAX];
unsigned char setup[SETUP_MAX];
unsigned char data[DATA_MAX];
};
@@ -68,6 +86,28 @@ static struct dentry *mon_dir; /* Usually /sys/kernel/debug/usbmon */
static void mon_text_ctor(void *, struct kmem_cache *, unsigned long);
+struct mon_text_ptr {
+ int cnt, limit;
+ char *pbuf;
+};
+
+static struct mon_event_text *
+ mon_text_read_wait(struct mon_reader_text *rp, struct file *file);
+static void mon_text_read_head_t(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_head_u(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_statset(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_intstat(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_isostat(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_isodesc(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+static void mon_text_read_data(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep);
+
/*
* mon_text_submit
* mon_text_complete
@@ -84,8 +124,10 @@ static inline char mon_text_get_setup(struct mon_event_text *ep,
if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
return '-';
- if (mbus->uses_dma && (urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
+ if (urb->dev->bus->uses_dma &&
+ (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) {
return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX);
+ }
if (urb->setup_packet == NULL)
return 'Z'; /* '0' would be not as pretty. */
@@ -104,10 +146,10 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
len = DATA_MAX;
if (usb_pipein(pipe)) {
- if (ev_type == 'S')
+ if (ev_type != 'C')
return '<';
} else {
- if (ev_type == 'C')
+ if (ev_type != 'S')
return '>';
}
@@ -120,8 +162,10 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb,
* contain non-NULL garbage in case the upper level promised to
* set DMA for the HCD.
*/
- if (mbus->uses_dma && (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP))
+ if (urb->dev->bus->uses_dma &&
+ (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
return mon_dmapeek(ep->data, urb->transfer_dma, len);
+ }
if (urb->transfer_buffer == NULL)
return 'Z'; /* '0' would be not as pretty. */
@@ -146,6 +190,9 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
{
struct mon_event_text *ep;
unsigned int stamp;
+ struct usb_iso_packet_descriptor *fp;
+ struct mon_iso_desc *dp;
+ int i, ndesc;
stamp = mon_get_timestamp();
@@ -158,12 +205,36 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb,
ep->type = ev_type;
ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
+ ep->busnum = urb->dev->bus->busnum;
ep->tstamp = stamp;
ep->length = (ev_type == 'S') ?
urb->transfer_buffer_length : urb->actual_length;
/* Collecting status makes debugging sense for submits, too */
ep->status = urb->status;
+ if (usb_pipeint(urb->pipe)) {
+ ep->interval = urb->interval;
+ } else if (usb_pipeisoc(urb->pipe)) {
+ ep->interval = urb->interval;
+ ep->start_frame = urb->start_frame;
+ ep->error_count = urb->error_count;
+ }
+ ep->numdesc = urb->number_of_packets;
+ if (usb_pipeisoc(urb->pipe) && urb->number_of_packets > 0) {
+ if ((ndesc = urb->number_of_packets) > ISODESC_MAX)
+ ndesc = ISODESC_MAX;
+ fp = urb->iso_frame_desc;
+ dp = ep->isodesc;
+ for (i = 0; i < ndesc; i++) {
+ dp->status = fp->status;
+ dp->offset = fp->offset;
+ dp->length = (ev_type == 'S') ?
+ fp->length : fp->actual_length;
+ fp++;
+ dp++;
+ }
+ }
+
ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus);
ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type,
rp->r.m_bus);
@@ -199,6 +270,7 @@ static void mon_text_error(void *data, struct urb *urb, int error)
ep->type = 'E';
ep->pipe = urb->pipe;
ep->id = (unsigned long) urb;
+ ep->busnum = 0;
ep->tstamp = 0;
ep->length = 0;
ep->status = error;
@@ -237,13 +309,11 @@ static struct mon_event_text *mon_text_fetch(struct mon_reader_text *rp,
static int mon_text_open(struct inode *inode, struct file *file)
{
struct mon_bus *mbus;
- struct usb_bus *ubus;
struct mon_reader_text *rp;
int rc;
mutex_lock(&mon_lock);
mbus = inode->i_private;
- ubus = mbus->u_bus;
rp = kzalloc(sizeof(struct mon_reader_text), GFP_KERNEL);
if (rp == NULL) {
@@ -267,8 +337,7 @@ static int mon_text_open(struct inode *inode, struct file *file)
rp->r.rnf_error = mon_text_error;
rp->r.rnf_complete = mon_text_complete;
- snprintf(rp->slab_name, SLAB_NAME_SZ, "mon%dt_%lx", ubus->busnum,
- (long)rp);
+ snprintf(rp->slab_name, SLAB_NAME_SZ, "mon_text_%p", rp);
rp->e_slab = kmem_cache_create(rp->slab_name,
sizeof(struct mon_event_text), sizeof(long), 0,
mon_text_ctor, NULL);
@@ -300,17 +369,75 @@ err_alloc:
* dd if=/dbg/usbmon/0t bs=10
* Also, we do not allow seeks and do not bother advancing the offset.
*/
-static ssize_t mon_text_read(struct file *file, char __user *buf,
+static ssize_t mon_text_read_t(struct file *file, char __user *buf,
size_t nbytes, loff_t *ppos)
{
struct mon_reader_text *rp = file->private_data;
+ struct mon_event_text *ep;
+ struct mon_text_ptr ptr;
+
+ if (IS_ERR(ep = mon_text_read_wait(rp, file)))
+ return PTR_ERR(ep);
+ mutex_lock(&rp->printf_lock);
+ ptr.cnt = 0;
+ ptr.pbuf = rp->printf_buf;
+ ptr.limit = rp->printf_size;
+
+ mon_text_read_head_t(rp, &ptr, ep);
+ mon_text_read_statset(rp, &ptr, ep);
+ ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+ " %d", ep->length);
+ mon_text_read_data(rp, &ptr, ep);
+
+ if (copy_to_user(buf, rp->printf_buf, ptr.cnt))
+ ptr.cnt = -EFAULT;
+ mutex_unlock(&rp->printf_lock);
+ kmem_cache_free(rp->e_slab, ep);
+ return ptr.cnt;
+}
+
+static ssize_t mon_text_read_u(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct mon_reader_text *rp = file->private_data;
+ struct mon_event_text *ep;
+ struct mon_text_ptr ptr;
+
+ if (IS_ERR(ep = mon_text_read_wait(rp, file)))
+ return PTR_ERR(ep);
+ mutex_lock(&rp->printf_lock);
+ ptr.cnt = 0;
+ ptr.pbuf = rp->printf_buf;
+ ptr.limit = rp->printf_size;
+
+ mon_text_read_head_u(rp, &ptr, ep);
+ if (ep->type == 'E') {
+ mon_text_read_statset(rp, &ptr, ep);
+ } else if (usb_pipeisoc(ep->pipe)) {
+ mon_text_read_isostat(rp, &ptr, ep);
+ mon_text_read_isodesc(rp, &ptr, ep);
+ } else if (usb_pipeint(ep->pipe)) {
+ mon_text_read_intstat(rp, &ptr, ep);
+ } else {
+ mon_text_read_statset(rp, &ptr, ep);
+ }
+ ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt,
+ " %d", ep->length);
+ mon_text_read_data(rp, &ptr, ep);
+
+ if (copy_to_user(buf, rp->printf_buf, ptr.cnt))
+ ptr.cnt = -EFAULT;
+ mutex_unlock(&rp->printf_lock);
+ kmem_cache_free(rp->e_slab, ep);
+ return ptr.cnt;
+}
+
+static struct mon_event_text *mon_text_read_wait(struct mon_reader_text *rp,
+ struct file *file)
+{
struct mon_bus *mbus = rp->r.m_bus;
DECLARE_WAITQUEUE(waita, current);
struct mon_event_text *ep;
- int cnt, limit;
- char *pbuf;
- char udir, utype;
- int data_len, i;
add_wait_queue(&rp->wait, &waita);
set_current_state(TASK_INTERRUPTIBLE);
@@ -318,7 +445,7 @@ static ssize_t mon_text_read(struct file *file, char __user *buf,
if (file->f_flags & O_NONBLOCK) {
set_current_state(TASK_RUNNING);
remove_wait_queue(&rp->wait, &waita);
- return -EWOULDBLOCK; /* Same as EAGAIN in Linux */
+ return ERR_PTR(-EWOULDBLOCK);
}
/*
* We do not count nwaiters, because ->release is supposed
@@ -327,17 +454,19 @@ static ssize_t mon_text_read(struct file *file, char __user *buf,
schedule();
if (signal_pending(current)) {
remove_wait_queue(&rp->wait, &waita);
- return -EINTR;
+ return ERR_PTR(-EINTR);
}
set_current_state(TASK_INTERRUPTIBLE);
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&rp->wait, &waita);
+ return ep;
+}
- mutex_lock(&rp->printf_lock);
- cnt = 0;
- pbuf = rp->printf_buf;
- limit = rp->printf_size;
+static void mon_text_read_head_t(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ char udir, utype;
udir = usb_pipein(ep->pipe) ? 'i' : 'o';
switch (usb_pipetype(ep->pipe)) {
@@ -346,13 +475,38 @@ static ssize_t mon_text_read(struct file *file, char __user *buf,
case PIPE_CONTROL: utype = 'C'; break;
default: /* PIPE_BULK */ utype = 'B';
}
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
"%lx %u %c %c%c:%03u:%02u",
ep->id, ep->tstamp, ep->type,
- utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+ utype, udir,
+ usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+}
+
+static void mon_text_read_head_u(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ char udir, utype;
+
+ udir = usb_pipein(ep->pipe) ? 'i' : 'o';
+ switch (usb_pipetype(ep->pipe)) {
+ case PIPE_ISOCHRONOUS: utype = 'Z'; break;
+ case PIPE_INTERRUPT: utype = 'I'; break;
+ case PIPE_CONTROL: utype = 'C'; break;
+ default: /* PIPE_BULK */ utype = 'B';
+ }
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ "%lx %u %c %c%c:%d:%03u:%u",
+ ep->id, ep->tstamp, ep->type,
+ utype, udir,
+ ep->busnum, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe));
+}
+
+static void mon_text_read_statset(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
if (ep->setup_flag == 0) { /* Setup packet is present and captured */
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
" s %02x %02x %04x %04x %04x",
ep->setup[0],
ep->setup[1],
@@ -360,40 +514,86 @@ static ssize_t mon_text_read(struct file *file, char __user *buf,
(ep->setup[5] << 8) | ep->setup[4],
(ep->setup[7] << 8) | ep->setup[6]);
} else if (ep->setup_flag != '-') { /* Unable to capture setup packet */
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
" %c __ __ ____ ____ ____", ep->setup_flag);
} else { /* No setup for this kind of URB */
- cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->status);
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d", ep->status);
}
- cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->length);
+}
+
+static void mon_text_read_intstat(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d:%d", ep->status, ep->interval);
+}
+
+static void mon_text_read_isostat(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ if (ep->type == 'S') {
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d:%d:%d", ep->status, ep->interval, ep->start_frame);
+ } else {
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d:%d:%d:%d",
+ ep->status, ep->interval, ep->start_frame, ep->error_count);
+ }
+}
+
+static void mon_text_read_isodesc(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ int ndesc; /* Display this many */
+ int i;
+ const struct mon_iso_desc *dp;
+
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d", ep->numdesc);
+ ndesc = ep->numdesc;
+ if (ndesc > ISODESC_MAX)
+ ndesc = ISODESC_MAX;
+ if (ndesc < 0)
+ ndesc = 0;
+ dp = ep->isodesc;
+ for (i = 0; i < ndesc; i++) {
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " %d:%u:%u", dp->status, dp->offset, dp->length);
+ dp++;
+ }
+}
+
+static void mon_text_read_data(struct mon_reader_text *rp,
+ struct mon_text_ptr *p, const struct mon_event_text *ep)
+{
+ int data_len, i;
if ((data_len = ep->length) > 0) {
if (ep->data_flag == 0) {
- cnt += snprintf(pbuf + cnt, limit - cnt, " =");
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ " =");
if (data_len >= DATA_MAX)
data_len = DATA_MAX;
for (i = 0; i < data_len; i++) {
if (i % 4 == 0) {
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt,
+ p->limit - p->cnt,
" ");
}
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt,
+ p->limit - p->cnt,
"%02x", ep->data[i]);
}
- cnt += snprintf(pbuf + cnt, limit - cnt, "\n");
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
+ "\n");
} else {
- cnt += snprintf(pbuf + cnt, limit - cnt,
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt,
" %c\n", ep->data_flag);
}
} else {
- cnt += snprintf(pbuf + cnt, limit - cnt, "\n");
+ p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, "\n");
}
-
- if (copy_to_user(buf, rp->printf_buf, cnt))
- cnt = -EFAULT;
- mutex_unlock(&rp->printf_lock);
- kmem_cache_free(rp->e_slab, ep);
- return cnt;
}
static int mon_text_release(struct inode *inode, struct file *file)
@@ -439,34 +639,46 @@ static int mon_text_release(struct inode *inode, struct file *file)
return 0;
}
-static const struct file_operations mon_fops_text = {
+static const struct file_operations mon_fops_text_t = {
.owner = THIS_MODULE,
.open = mon_text_open,
.llseek = no_llseek,
- .read = mon_text_read,
- /* .write = mon_text_write, */
- /* .poll = mon_text_poll, */
- /* .ioctl = mon_text_ioctl, */
+ .read = mon_text_read_t,
.release = mon_text_release,
};
-int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus)
+static const struct file_operations mon_fops_text_u = {
+ .owner = THIS_MODULE,
+ .open = mon_text_open,
+ .llseek = no_llseek,
+ .read = mon_text_read_u,
+ .release = mon_text_release,
+};
+
+int mon_text_add(struct mon_bus *mbus, int busnum)
{
struct dentry *d;
enum { NAMESZ = 10 };
char name[NAMESZ];
int rc;
- rc = snprintf(name, NAMESZ, "%dt", ubus->busnum);
+ rc = snprintf(name, NAMESZ, "%dt", busnum);
if (rc <= 0 || rc >= NAMESZ)
goto err_print_t;
- d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text);
+ d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_t);
if (d == NULL)
goto err_create_t;
mbus->dent_t = d;
- /* XXX The stats do not belong to here (text API), but oh well... */
- rc = snprintf(name, NAMESZ, "%ds", ubus->busnum);
+ rc = snprintf(name, NAMESZ, "%du", busnum);
+ if (rc <= 0 || rc >= NAMESZ)
+ goto err_print_u;
+ d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_u);
+ if (d == NULL)
+ goto err_create_u;
+ mbus->dent_u = d;
+
+ rc = snprintf(name, NAMESZ, "%ds", busnum);
if (rc <= 0 || rc >= NAMESZ)
goto err_print_s;
d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat);
@@ -478,6 +690,10 @@ int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus)
err_create_s:
err_print_s:
+ debugfs_remove(mbus->dent_u);
+ mbus->dent_u = NULL;
+err_create_u:
+err_print_u:
debugfs_remove(mbus->dent_t);
mbus->dent_t = NULL;
err_create_t:
@@ -487,6 +703,7 @@ err_print_t:
void mon_text_del(struct mon_bus *mbus)
{
+ debugfs_remove(mbus->dent_u);
debugfs_remove(mbus->dent_t);
debugfs_remove(mbus->dent_s);
}
diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h
index efdfd8993d9e..13d63255283e 100644
--- a/drivers/usb/mon/usb_mon.h
+++ b/drivers/usb/mon/usb_mon.h
@@ -22,7 +22,7 @@ struct mon_bus {
int text_inited;
struct dentry *dent_s; /* Debugging file */
struct dentry *dent_t; /* Text interface file */
- int uses_dma;
+ struct dentry *dent_u; /* Second text interface file */
/* Ref */
int nreaders; /* Under mon_lock AND mbus->lock */
@@ -52,7 +52,7 @@ void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r);
struct mon_bus *mon_bus_lookup(unsigned int num);
-int /*bool*/ mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus);
+int /*bool*/ mon_text_add(struct mon_bus *mbus, int busnum);
void mon_text_del(struct mon_bus *mbus);
// void mon_bin_add(struct mon_bus *);
@@ -81,4 +81,6 @@ extern struct mutex mon_lock;
extern const struct file_operations mon_fops_stat;
+extern struct mon_bus mon_bus0; /* Only for redundant checks */
+
#endif /* __USB_MON_H */
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 5808ea082459..d5ef97bc4d01 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -298,7 +298,7 @@ static int asix_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
if (ax_skb) {
ax_skb->len = size;
ax_skb->data = packet;
- ax_skb->tail = packet + size;
+ skb_set_tail_pointer(ax_skb, size);
usbnet_skb_return(dev, ax_skb);
} else {
return 0;
@@ -338,7 +338,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
&& ((headroom + tailroom) >= (4 + padlen))) {
if ((headroom < 4) || (tailroom < padlen)) {
skb->data = memmove(skb->head + 4, skb->data, skb->len);
- skb->tail = skb->data + skb->len;
+ skb_set_tail_pointer(skb, skb->len);
}
} else {
struct sk_buff *skb2;
@@ -352,11 +352,11 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
skb_push(skb, 4);
packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
cpu_to_le32s(&packet_len);
- memcpy(skb->data, &packet_len, sizeof(packet_len));
+ skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
if ((skb->len % 512) == 0) {
cpu_to_le32s(&padbytes);
- memcpy( skb->tail, &padbytes, sizeof(padbytes));
+ memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
skb_put(skb, sizeof(padbytes));
}
return skb;
diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c
index 4852012735f6..86e90c59d551 100644
--- a/drivers/usb/net/catc.c
+++ b/drivers/usb/net/catc.c
@@ -255,7 +255,6 @@ static void catc_rx_done(struct urb *urb)
if (!(skb = dev_alloc_skb(pkt_len)))
return;
- skb->dev = catc->netdev;
eth_copy_and_sum(skb, pkt_start + pkt_offset, pkt_len, 0);
skb_put(skb, pkt_len);
@@ -356,7 +355,7 @@ resubmit:
* Transmit routines.
*/
-static void catc_tx_run(struct catc *catc)
+static int catc_tx_run(struct catc *catc)
{
int status;
@@ -374,12 +373,14 @@ static void catc_tx_run(struct catc *catc)
catc->tx_ptr = 0;
catc->netdev->trans_start = jiffies;
+ return status;
}
static void catc_tx_done(struct urb *urb)
{
struct catc *catc = urb->context;
unsigned long flags;
+ int r;
if (urb->status == -ECONNRESET) {
dbg("Tx Reset.");
@@ -398,10 +399,13 @@ static void catc_tx_done(struct urb *urb)
spin_lock_irqsave(&catc->tx_lock, flags);
- if (catc->tx_ptr)
- catc_tx_run(catc);
- else
+ if (catc->tx_ptr) {
+ r = catc_tx_run(catc);
+ if (unlikely(r < 0))
+ clear_bit(TX_RUNNING, &catc->flags);
+ } else {
clear_bit(TX_RUNNING, &catc->flags);
+ }
netif_wake_queue(catc->netdev);
@@ -412,6 +416,7 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct catc *catc = netdev_priv(netdev);
unsigned long flags;
+ int r = 0;
char *tx_buf;
spin_lock_irqsave(&catc->tx_lock, flags);
@@ -419,11 +424,14 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
*((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
- memcpy(tx_buf + 2, skb->data, skb->len);
+ skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
catc->tx_ptr += skb->len + 2;
- if (!test_and_set_bit(TX_RUNNING, &catc->flags))
- catc_tx_run(catc);
+ if (!test_and_set_bit(TX_RUNNING, &catc->flags)) {
+ r = catc_tx_run(catc);
+ if (r < 0)
+ clear_bit(TX_RUNNING, &catc->flags);
+ }
if ((catc->is_f5u011 && catc->tx_ptr)
|| (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2))))
@@ -431,8 +439,10 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev)
spin_unlock_irqrestore(&catc->tx_lock, flags);
- catc->stats.tx_bytes += skb->len;
- catc->stats.tx_packets++;
+ if (r >= 0) {
+ catc->stats.tx_bytes += skb->len;
+ catc->stats.tx_packets++;
+ }
dev_kfree_skb(skb);
diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c
index 5130cc7eb314..a67638601477 100644
--- a/drivers/usb/net/dm9601.c
+++ b/drivers/usb/net/dm9601.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/sched.h>
+#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
@@ -85,7 +86,7 @@ static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value)
usb_sndctrlpipe(dev->udev, 0),
DM_WRITE_REG,
USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE,
- value, reg, 0, 0, USB_CTRL_SET_TIMEOUT);
+ value, reg, NULL, 0, USB_CTRL_SET_TIMEOUT);
}
static void dm_write_async_callback(struct urb *urb)
@@ -171,7 +172,7 @@ static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value)
usb_fill_control_urb(urb, dev->udev,
usb_sndctrlpipe(dev->udev, 0),
- (void *)req, 0, 0, dm_write_async_callback, req);
+ (void *)req, NULL, 0, dm_write_async_callback, req);
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status < 0) {
diff --git a/drivers/usb/net/gl620a.c b/drivers/usb/net/gl620a.c
index d257a8e026d6..031cf5ca4dbb 100644
--- a/drivers/usb/net/gl620a.c
+++ b/drivers/usb/net/gl620a.c
@@ -157,7 +157,7 @@ genelink_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
if ((headroom < (4 + 4*1)) || (tailroom < padlen)) {
skb->data = memmove(skb->head + (4 + 4*1),
skb->data, skb->len);
- skb->tail = skb->data + skb->len;
+ skb_set_tail_pointer(skb, skb->len);
}
} else {
struct sk_buff *skb2;
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index de95268ae4b8..a0cc05d21a6a 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -636,8 +636,6 @@ static void kaweth_usb_receive(struct urb *urb)
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
- skb->dev = net;
-
eth_copy_and_sum(skb, kaweth->rx_buf + 2, pkt_len, 0);
skb_put(skb, pkt_len);
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
index ccebfdef4751..19bf8dae70c9 100644
--- a/drivers/usb/net/net1080.c
+++ b/drivers/usb/net/net1080.c
@@ -520,7 +520,7 @@ net1080_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
skb->data = memmove(skb->head
+ sizeof (struct nc_header),
skb->data, skb->len);
- skb->tail = skb->data + len;
+ skb_set_tail_pointer(skb, len);
goto encapsulate;
}
}
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index d48c024cff59..a05fd97e5bc2 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -316,6 +316,7 @@ static int update_eth_regs_async(pegasus_t * pegasus)
return ret;
}
+/* Returns 0 on success, error on failure */
static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
{
int i;
@@ -574,7 +575,6 @@ static void fill_skb_pool(pegasus_t * pegasus)
*/
if (pegasus->rx_pool[i] == NULL)
return;
- pegasus->rx_pool[i]->dev = pegasus->net;
skb_reserve(pegasus->rx_pool[i], 2);
}
}
@@ -847,10 +847,6 @@ static void intr_callback(struct urb *urb)
* d[0].NO_CARRIER kicks in only with failed TX.
* ... so monitoring with MII may be safest.
*/
- if (d[0] & NO_CARRIER)
- netif_carrier_off(net);
- else
- netif_carrier_on(net);
/* bytes 3-4 == rx_lostpkt, reg 2E/2F */
pegasus->stats.rx_missed_errors += ((d[3] & 0x7f) << 8) | d[4];
@@ -883,7 +879,7 @@ static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
netif_stop_queue(net);
((__le16 *) pegasus->tx_buff)[0] = cpu_to_le16(l16);
- memcpy(pegasus->tx_buff + 2, skb->data, skb->len);
+ skb_copy_from_linear_data(skb, pegasus->tx_buff + 2, skb->len);
usb_fill_bulk_urb(pegasus->tx_urb, pegasus->usb,
usb_sndbulkpipe(pegasus->usb, 2),
pegasus->tx_buff, count,
@@ -950,7 +946,7 @@ static void set_carrier(struct net_device *net)
pegasus_t *pegasus = netdev_priv(net);
u16 tmp;
- if (!read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
+ if (read_mii_word(pegasus, pegasus->phy, MII_BMSR, &tmp))
return;
if (tmp & BMSR_LSTATUS)
@@ -1408,8 +1404,10 @@ static void pegasus_disconnect(struct usb_interface *intf)
unlink_all_urbs(pegasus);
free_all_urbs(pegasus);
free_skb_pool(pegasus);
- if (pegasus->rx_skb)
+ if (pegasus->rx_skb != NULL) {
dev_kfree_skb(pegasus->rx_skb);
+ pegasus->rx_skb = NULL;
+ }
free_netdev(pegasus->net);
}
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index 39a21c74fdf4..980e4aaa97aa 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -253,6 +253,7 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
* of that mess as possible.
*/
#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101)
+#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106)
#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e)
/*
@@ -349,7 +350,7 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
case RNDIS_MSG_INDICATE: { /* fault */
// struct rndis_indicate *msg = (void *)buf;
dev_info(&info->control->dev,
- "rndis fault indication\n");
+ "rndis fault indication\n");
}
break;
case RNDIS_MSG_KEEPALIVE: { /* ping */
@@ -387,6 +388,71 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
return -ETIMEDOUT;
}
+/*
+ * rndis_query:
+ *
+ * Performs a query for @oid along with 0 or more bytes of payload as
+ * specified by @in_len. If @reply_len is not set to -1 then the reply
+ * length is checked against this value, resulting in an error if it
+ * doesn't match.
+ *
+ * NOTE: Adding a payload exactly or greater than the size of the expected
+ * response payload is an evident requirement MSFT added for ActiveSync.
+ *
+ * The only exception is for OIDs that return a variably sized response,
+ * in which case no payload should be added. This undocumented (and
+ * nonsensical!) issue was found by sniffing protocol requests from the
+ * ActiveSync 4.1 Windows driver.
+ */
+static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
+ void *buf, u32 oid, u32 in_len,
+ void **reply, int *reply_len)
+{
+ int retval;
+ union {
+ void *buf;
+ struct rndis_msg_hdr *header;
+ struct rndis_query *get;
+ struct rndis_query_c *get_c;
+ } u;
+ u32 off, len;
+
+ u.buf = buf;
+
+ memset(u.get, 0, sizeof *u.get + in_len);
+ u.get->msg_type = RNDIS_MSG_QUERY;
+ u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
+ u.get->oid = oid;
+ u.get->len = cpu_to_le32(in_len);
+ u.get->offset = ccpu2(20);
+
+ retval = rndis_command(dev, u.header);
+ if (unlikely(retval < 0)) {
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
+ oid, retval);
+ return retval;
+ }
+
+ off = le32_to_cpu(u.get_c->offset);
+ len = le32_to_cpu(u.get_c->len);
+ if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE))
+ goto response_error;
+
+ if (*reply_len != -1 && len != *reply_len)
+ goto response_error;
+
+ *reply = (unsigned char *) &u.get_c->request_id + off;
+ *reply_len = len;
+
+ return retval;
+
+response_error:
+ dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
+ "invalid response - off %d len %d\n",
+ oid, off, len);
+ return -EDOM;
+}
+
static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
{
int retval;
@@ -403,6 +469,8 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
struct rndis_set_c *set_c;
} u;
u32 tmp;
+ int reply_len;
+ unsigned char *bp;
/* we can't rely on i/o from stack working, or stack allocation */
u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
@@ -421,6 +489,12 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
* TX we'll stick to one Ethernet packet plus RNDIS framing.
* For RX we handle drivers that zero-pad to end-of-packet.
* Don't let userspace change these settings.
+ *
+ * NOTE: there still seems to be wierdness here, as if we need
+ * to do some more things to make sure WinCE targets accept this.
+ * They default to jumbograms of 8KB or 16KB, which is absurd
+ * for such low data rates and which is also more than Linux
+ * can usually expect to allocate for SKB data...
*/
net->hard_header_len += sizeof (struct rndis_data_hdr);
dev->hard_mtu = net->mtu + net->hard_header_len;
@@ -434,7 +508,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
- goto fail_and_release;
+ goto fail_and_release;
}
tmp = le32_to_cpu(u.init_c->max_transfer_size);
if (tmp < dev->hard_mtu) {
@@ -450,34 +524,15 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
dev->hard_mtu, tmp, dev->rx_urb_size,
1 << le32_to_cpu(u.init_c->packet_alignment));
- /* Get designated host ethernet address.
- *
- * Adding a payload exactly the same size as the expected response
- * payload is an evident requirement MSFT added for ActiveSync.
- * This undocumented (and nonsensical) issue was found by sniffing
- * protocol requests from the ActiveSync 4.1 Windows driver.
- */
- memset(u.get, 0, sizeof *u.get + 48);
- u.get->msg_type = RNDIS_MSG_QUERY;
- u.get->msg_len = ccpu2(sizeof *u.get + 48);
- u.get->oid = OID_802_3_PERMANENT_ADDRESS;
- u.get->len = ccpu2(48);
- u.get->offset = ccpu2(20);
-
- retval = rndis_command(dev, u.header);
- if (unlikely(retval < 0)) {
+ /* Get designated host ethernet address */
+ reply_len = ETH_ALEN;
+ retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
+ 48, (void **) &bp, &reply_len);
+ if (unlikely(retval< 0)) {
dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
goto fail_and_release;
}
- tmp = le32_to_cpu(u.get_c->offset);
- if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN)
- || u.get_c->len != ccpu2(ETH_ALEN))) {
- dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
- tmp, le32_to_cpu(u.get_c->len));
- retval = -EDOM;
- goto fail_and_release;
- }
- memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
+ memcpy(net->dev_addr, bp, ETH_ALEN);
/* set a nonzero filter to enable data transfers */
memset(u.set, 0, sizeof *u.set);
@@ -502,6 +557,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
fail_and_release:
usb_set_intfdata(info->data, NULL);
usb_driver_release_interface(driver_of(intf), info->data);
+ info->data = NULL;
fail:
kfree(u.buf);
return retval;
@@ -588,7 +644,7 @@ rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
if (likely((sizeof *hdr) <= room)) {
skb->data = memmove(skb->head + sizeof *hdr,
skb->data, len);
- skb->tail = skb->data + len;
+ skb_set_tail_pointer(skb, len);
goto fill;
}
}
@@ -618,7 +674,7 @@ fill:
static const struct driver_info rndis_info = {
.description = "RNDIS device",
- .flags = FLAG_ETHER | FLAG_FRAMING_RN,
+ .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
.bind = rndis_bind,
.unbind = rndis_unbind,
.status = rndis_status,
diff --git a/drivers/usb/net/rtl8150.c b/drivers/usb/net/rtl8150.c
index ea153dc9b0ac..fa598f0340cf 100644
--- a/drivers/usb/net/rtl8150.c
+++ b/drivers/usb/net/rtl8150.c
@@ -646,7 +646,6 @@ static void fill_skb_pool(rtl8150_t *dev)
if (!skb) {
return;
}
- skb->dev = dev->netdev;
skb_reserve(skb, 2);
dev->rx_skb_pool[i] = skb;
}
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index de69b183bd2f..f9cd42d058b0 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -203,7 +203,6 @@ void usbnet_skb_return (struct usbnet *dev, struct sk_buff *skb)
{
int status;
- skb->dev = dev->net;
skb->protocol = eth_type_trans (skb, dev->net);
dev->stats.rx_packets++;
dev->stats.rx_bytes += skb->len;
@@ -735,8 +734,7 @@ void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info)
{
struct usbnet *dev = netdev_priv(net);
- /* REVISIT don't always return "usbnet" */
- strncpy (info->driver, driver_name, sizeof info->driver);
+ strncpy (info->driver, dev->driver_name, sizeof info->driver);
strncpy (info->version, DRIVER_VERSION, sizeof info->version);
strncpy (info->fw_version, dev->driver_info->description,
sizeof info->fw_version);
@@ -1116,10 +1114,12 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
struct driver_info *info;
struct usb_device *xdev;
int status;
+ const char *name;
+ name = udev->dev.driver->name;
info = (struct driver_info *) prod->driver_info;
if (!info) {
- dev_dbg (&udev->dev, "blacklisted by %s\n", driver_name);
+ dev_dbg (&udev->dev, "blacklisted by %s\n", name);
return -ENODEV;
}
xdev = interface_to_usbdev (udev);
@@ -1139,6 +1139,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
dev = netdev_priv(net);
dev->udev = xdev;
dev->driver_info = info;
+ dev->driver_name = name;
dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV
| NETIF_MSG_PROBE | NETIF_MSG_LINK);
skb_queue_head_init (&dev->rxq);
diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h
index 07c70abbe0ec..cbb53e065d6c 100644
--- a/drivers/usb/net/usbnet.h
+++ b/drivers/usb/net/usbnet.h
@@ -29,6 +29,7 @@ struct usbnet {
/* housekeeping */
struct usb_device *udev;
struct driver_info *driver_info;
+ const char *driver_name;
wait_queue_head_t *wait;
struct mutex phy_mutex;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2f4d303ee36f..ba5d1dc03036 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -423,11 +423,11 @@ config USB_SERIAL_MCT_U232
module will be called mct_u232.
config USB_SERIAL_MOS7720
- tristate "USB Moschip 7720 Single Port Serial Driver"
+ tristate "USB Moschip 7720 Serial Driver"
depends on USB_SERIAL
---help---
- Say Y here if you want to use a USB Serial single port adapter from
- Moschip Semiconductor Tech.
+ Say Y here if you want to use USB Serial single and double
+ port adapters from Moschip Semiconductor Tech.
To compile this driver as a module, choose M here: the
module will be called mos7720.
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 11dad42c3c60..b675735bfbee 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -209,6 +209,7 @@ static void aircable_send(struct usb_serial_port *port)
int count, result;
struct aircable_private *priv = usb_get_serial_port_data(port);
unsigned char* buf;
+ u16 *dbuf;
dbg("%s - port %d", __FUNCTION__, port->number);
if (port->write_urb_busy)
return;
@@ -226,8 +227,8 @@ static void aircable_send(struct usb_serial_port *port)
buf[0] = TX_HEADER_0;
buf[1] = TX_HEADER_1;
- buf[2] = (unsigned char)count;
- buf[3] = (unsigned char)(count >> 8);
+ dbuf = (u16 *)&buf[2];
+ *dbuf = cpu_to_le16((u16)count);
serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE);
memcpy(port->write_urb->transfer_buffer, buf,
@@ -434,7 +435,7 @@ static void aircable_write_bulk_callback(struct urb *urb)
__FUNCTION__, urb->status);
port->write_urb->transfer_buffer_length = 1;
port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->write_urb, GFP_KERNEL);
+ result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result)
dev_err(&urb->dev->dev,
"%s - failed resubmitting write urb, error %d\n",
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index edd685791a6b..ea2175bb2274 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -341,7 +341,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
result = usb_serial_generic_open(port, filp);
if (result)
- return result;
+ goto err_out;
/* open */
ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf);
@@ -372,6 +372,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp)
if (port->tty)
ark3116_set_termios(port, &tmp_termios);
+err_out:
kfree(buf);
return result;
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index d7d0ba986a80..e831cb7f64fd 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -58,9 +58,11 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
{ USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
{ USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8ff9d54b21e6..95a1805b064f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -342,6 +342,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) },
@@ -1433,6 +1434,7 @@ static int ftdi_write (struct usb_serial_port *port,
dbg("%s - write limit hit\n", __FUNCTION__);
return 0;
}
+ priv->tx_outstanding_urbs++;
spin_unlock_irqrestore(&priv->tx_lock, flags);
data_offset = priv->write_offset;
@@ -1450,14 +1452,15 @@ static int ftdi_write (struct usb_serial_port *port,
buffer = kmalloc (transfer_size, GFP_ATOMIC);
if (!buffer) {
err("%s ran out of kernel memory for urb ...", __FUNCTION__);
- return -ENOMEM;
+ count = -ENOMEM;
+ goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
err("%s - no more free urbs", __FUNCTION__);
- kfree (buffer);
- return -ENOMEM;
+ count = -ENOMEM;
+ goto error_no_urb;
}
/* Copy data */
@@ -1499,10 +1502,9 @@ static int ftdi_write (struct usb_serial_port *port,
if (status) {
err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
count = status;
- kfree (buffer);
+ goto error;
} else {
spin_lock_irqsave(&priv->tx_lock, flags);
- ++priv->tx_outstanding_urbs;
priv->tx_outstanding_bytes += count;
priv->tx_bytes += count;
spin_unlock_irqrestore(&priv->tx_lock, flags);
@@ -1510,10 +1512,19 @@ static int ftdi_write (struct usb_serial_port *port,
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
- usb_free_urb (urb);
+ usb_free_urb(urb);
dbg("%s write returning: %d", __FUNCTION__, count);
return count;
+error:
+ usb_free_urb(urb);
+error_no_urb:
+ kfree (buffer);
+error_no_buffer:
+ spin_lock_irqsave(&priv->tx_lock, flags);
+ priv->tx_outstanding_urbs--;
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return count;
} /* ftdi_write */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 513cfe1b768b..77ad0a09b384 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -31,6 +31,7 @@
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
+#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */
/* www.canusb.com Lawicel CANUSB device */
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 6a26a2e683a6..18f74ac76565 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -111,7 +111,7 @@ struct edgeport_port {
struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */
struct urb *write_urb; /* write URB for this port */
- char write_in_progress; /* TRUE while a write URB is outstanding */
+ bool write_in_progress; /* 'true' while a write URB is outstanding */
spinlock_t ep_lock;
__u8 shadowLCR; /* last LCR value received */
@@ -123,11 +123,11 @@ struct edgeport_port {
__u8 validDataMask;
__u32 baudRate;
- char open;
- char openPending;
- char commandPending;
- char closePending;
- char chaseResponsePending;
+ bool open;
+ bool openPending;
+ bool commandPending;
+ bool closePending;
+ bool chaseResponsePending;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */
@@ -156,7 +156,7 @@ struct edgeport_serial {
__u8 bulk_in_endpoint; /* the bulk in endpoint handle */
unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */
struct urb * read_urb; /* our bulk read urb */
- int read_in_progress;
+ bool read_in_progress;
spinlock_t es_lock;
__u8 bulk_out_endpoint; /* the bulk out endpoint handle */
@@ -212,7 +212,7 @@ static int debug;
static int low_latency = 1; /* tty low latency flag, on by default */
-static int CmdUrbs = 0; /* Number of outstanding Command Write Urbs */
+static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
/* local function prototypes */
@@ -631,14 +631,14 @@ static void edge_interrupt_callback (struct urb *urb)
if (edge_serial->rxBytesAvail > 0 &&
!edge_serial->read_in_progress) {
dbg("%s - posting a read", __FUNCTION__);
- edge_serial->read_in_progress = TRUE;
+ edge_serial->read_in_progress = true;
/* we have pending bytes on the bulk in pipe, send a request */
edge_serial->read_urb->dev = edge_serial->serial->dev;
result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (result) {
dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result);
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
}
}
spin_unlock(&edge_serial->es_lock);
@@ -695,13 +695,13 @@ static void edge_bulk_in_callback (struct urb *urb)
if (urb->status) {
dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status);
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
return;
}
if (urb->actual_length == 0) {
dbg("%s - read bulk callback with no data", __FUNCTION__);
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
return;
}
@@ -725,10 +725,10 @@ static void edge_bulk_in_callback (struct urb *urb)
status = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC);
if (status) {
dev_err(&urb->dev->dev, "%s - usb_submit_urb(read bulk) failed, status = %d\n", __FUNCTION__, status);
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
}
} else {
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
}
spin_unlock(&edge_serial->es_lock);
@@ -759,7 +759,7 @@ static void edge_bulk_out_data_callback (struct urb *urb)
}
// Release the Write URB
- edge_port->write_in_progress = FALSE;
+ edge_port->write_in_progress = false;
// Check if more data needs to be sent
send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port);
@@ -779,8 +779,8 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
dbg("%s", __FUNCTION__);
- CmdUrbs--;
- dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs);
+ atomic_dec(&CmdUrbs);
+ dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
/* clean up the transfer buffer */
@@ -802,7 +802,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb)
tty_wakeup(tty);
/* we have completed the command */
- edge_port->commandPending = FALSE;
+ edge_port->commandPending = false;
wake_up(&edge_port->wait_command);
}
@@ -868,7 +868,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
port0->bulk_in_buffer,
edge_serial->read_urb->transfer_buffer_length,
edge_bulk_in_callback, edge_serial);
- edge_serial->read_in_progress = FALSE;
+ edge_serial->read_in_progress = false;
/* start interrupt read for this edgeport
* this interrupt will continue as long as the edgeport is connected */
@@ -890,26 +890,26 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
/* initialize our port settings */
edge_port->txCredits = 0; /* Can't send any data yet */
edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */
- edge_port->chaseResponsePending = FALSE;
+ edge_port->chaseResponsePending = false;
/* send a open port command */
- edge_port->openPending = TRUE;
- edge_port->open = FALSE;
+ edge_port->openPending = true;
+ edge_port->open = false;
response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0);
if (response < 0) {
dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__);
- edge_port->openPending = FALSE;
+ edge_port->openPending = false;
return -ENODEV;
}
/* now wait for the port to be completely opened */
- wait_event_timeout(edge_port->wait_open, (edge_port->openPending != TRUE), OPEN_TIMEOUT);
+ wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT);
- if (edge_port->open == FALSE) {
+ if (!edge_port->open) {
/* open timed out */
dbg("%s - open timedout", __FUNCTION__);
- edge_port->openPending = FALSE;
+ edge_port->openPending = false;
return -ENODEV;
}
@@ -928,7 +928,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp)
/* Allocate a URB for the write */
edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL);
- edge_port->write_in_progress = FALSE;
+ edge_port->write_in_progress = false;
if (!edge_port->write_urb) {
dbg("%s - no memory", __FUNCTION__);
@@ -966,7 +966,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
lastCredits = edge_port->txCredits;
// Did we get our Chase response
- if (edge_port->chaseResponsePending == FALSE) {
+ if (!edge_port->chaseResponsePending) {
dbg("%s - Got Chase Response", __FUNCTION__);
// did we get all of our credit back?
@@ -985,7 +985,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port)
// No activity.. count down.
loop--;
if (loop == 0) {
- edge_port->chaseResponsePending = FALSE;
+ edge_port->chaseResponsePending = false;
dbg("%s - Chase TIMEOUT", __FUNCTION__);
return;
}
@@ -1068,13 +1068,13 @@ static void edge_close (struct usb_serial_port *port, struct file * filp)
// block until tx is empty
block_until_tx_empty(edge_port);
- edge_port->closePending = TRUE;
+ edge_port->closePending = true;
if ((!edge_serial->is_epic) ||
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPChase))) {
/* flush and chase */
- edge_port->chaseResponsePending = TRUE;
+ edge_port->chaseResponsePending = true;
dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
@@ -1082,7 +1082,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp)
// block until chase finished
block_until_chase_response(edge_port);
} else {
- edge_port->chaseResponsePending = FALSE;
+ edge_port->chaseResponsePending = false;
}
}
@@ -1094,10 +1094,10 @@ static void edge_close (struct usb_serial_port *port, struct file * filp)
send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
}
- //port->close = TRUE;
- edge_port->closePending = FALSE;
- edge_port->open = FALSE;
- edge_port->openPending = FALSE;
+ //port->close = true;
+ edge_port->closePending = false;
+ edge_port->open = false;
+ edge_port->openPending = false;
usb_kill_urb(edge_port->write_urb);
@@ -1247,7 +1247,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
}
// lock this write
- edge_port->write_in_progress = TRUE;
+ edge_port->write_in_progress = true;
// get a pointer to the write_urb
urb = edge_port->write_urb;
@@ -1261,7 +1261,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
buffer = kmalloc (count+2, GFP_ATOMIC);
if (buffer == NULL) {
dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__);
- edge_port->write_in_progress = FALSE;
+ edge_port->write_in_progress = false;
goto exit_send;
}
buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count);
@@ -1301,7 +1301,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge
if (status) {
/* something went wrong */
dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status);
- edge_port->write_in_progress = FALSE;
+ edge_port->write_in_progress = false;
/* revert the credits as something bad happened. */
edge_port->txCredits += count;
@@ -1332,7 +1332,7 @@ static int edge_write_room (struct usb_serial_port *port)
if (edge_port == NULL)
return -ENODEV;
- if (edge_port->closePending == TRUE)
+ if (edge_port->closePending)
return -ENODEV;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -1371,7 +1371,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port)
if (edge_port == NULL)
return -ENODEV;
- if (edge_port->closePending == TRUE)
+ if (edge_port->closePending)
return -ENODEV;
if (!edge_port->open) {
@@ -1762,7 +1762,7 @@ static void edge_break (struct usb_serial_port *port, int break_state)
((edge_serial->is_epic) &&
(edge_serial->epic_descriptor.Supports.IOSPChase))) {
/* flush and chase */
- edge_port->chaseResponsePending = TRUE;
+ edge_port->chaseResponsePending = true;
dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
@@ -1770,7 +1770,7 @@ static void edge_break (struct usb_serial_port *port, int break_state)
// block until chase finished
block_until_chase_response(edge_port);
} else {
- edge_port->chaseResponsePending = FALSE;
+ edge_port->chaseResponsePending = false;
}
}
@@ -1952,13 +1952,13 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
// Also, we currently clear flag and close the port regardless of content of above's Byte3.
// We could choose to do something else when Byte3 says Timeout on Chase from Edgeport,
// like wait longer in block_until_chase_response, but for now we don't.
- edge_port->chaseResponsePending = FALSE;
+ edge_port->chaseResponsePending = false;
wake_up (&edge_port->wait_chase);
return;
case IOSP_EXT_STATUS_RX_CHECK_RSP:
dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 );
- //Port->RxCheckRsp = TRUE;
+ //Port->RxCheckRsp = true;
return;
}
}
@@ -1974,8 +1974,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
change_port_settings (edge_port, edge_port->port->tty->termios);
/* we have completed the open */
- edge_port->openPending = FALSE;
- edge_port->open = TRUE;
+ edge_port->openPending = false;
+ edge_port->open = true;
wake_up(&edge_port->wait_open);
return;
}
@@ -1983,7 +1983,7 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
// If port is closed, silently discard all rcvd status. We can
// have cases where buffered status is received AFTER the close
// port command is sent to the Edgeport.
- if ((!edge_port->open ) || (edge_port->closePending)) {
+ if (!edge_port->open || edge_port->closePending) {
return;
}
@@ -1991,14 +1991,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2
// Not currently sent by Edgeport
case IOSP_STATUS_LSR:
dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2);
- handle_new_lsr (edge_port, FALSE, byte2, 0);
+ handle_new_lsr(edge_port, false, byte2, 0);
break;
case IOSP_STATUS_LSR_DATA:
dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3);
// byte2 is LSR Register
// byte3 is broken data byte
- handle_new_lsr (edge_port, TRUE, byte2, byte3);
+ handle_new_lsr(edge_port, true, byte2, byte3);
break;
//
// case IOSP_EXT_4_STATUS:
@@ -2317,14 +2317,14 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer
if (!urb)
return -ENOMEM;
- CmdUrbs++;
- dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs);
+ atomic_inc(&CmdUrbs);
+ dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs));
usb_fill_bulk_urb (urb, edge_serial->serial->dev,
usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint),
buffer, length, edge_bulk_out_cmd_callback, edge_port);
- edge_port->commandPending = TRUE;
+ edge_port->commandPending = true;
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
@@ -2332,16 +2332,16 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer
dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status);
usb_kill_urb(urb);
usb_free_urb(urb);
- CmdUrbs--;
+ atomic_dec(&CmdUrbs);
return status;
}
// wait for command to finish
timeout = COMMAND_TIMEOUT;
#if 0
- wait_event (&edge_port->wait_command, (edge_port->commandPending == FALSE));
+ wait_event (&edge_port->wait_command, !edge_port->commandPending);
- if (edge_port->commandPending == TRUE) {
+ if (edge_port->commandPending) {
/* command timed out */
dbg("%s - command timed out", __FUNCTION__);
status = -EINVAL;
@@ -2524,8 +2524,8 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi
dbg("%s - port %d", __FUNCTION__, edge_port->port->number);
- if ((!edge_port->open) &&
- (!edge_port->openPending)) {
+ if (!edge_port->open &&
+ !edge_port->openPending) {
dbg("%s - port not opened", __FUNCTION__);
return;
}
@@ -2836,9 +2836,9 @@ static int edge_startup (struct usb_serial *serial)
struct usb_device *dev;
int i, j;
int response;
- int interrupt_in_found;
- int bulk_in_found;
- int bulk_out_found;
+ bool interrupt_in_found;
+ bool bulk_in_found;
+ bool bulk_out_found;
static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0,
EDGE_COMPATIBILITY_MASK1,
EDGE_COMPATIBILITY_MASK2 };
@@ -2936,14 +2936,14 @@ static int edge_startup (struct usb_serial *serial)
if (edge_serial->is_epic) {
/* EPIC thing, set up our interrupt polling now and our read urb, so
* that the device knows it really is connected. */
- interrupt_in_found = bulk_in_found = bulk_out_found = FALSE;
+ interrupt_in_found = bulk_in_found = bulk_out_found = false;
for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) {
struct usb_endpoint_descriptor *endpoint;
int buffer_size;
endpoint = &serial->interface->altsetting[0].endpoint[i].desc;
buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
- if ((!interrupt_in_found) &&
+ if (!interrupt_in_found &&
(usb_endpoint_is_int_in(endpoint))) {
/* we found a interrupt in endpoint */
dbg("found interrupt in");
@@ -2972,10 +2972,10 @@ static int edge_startup (struct usb_serial *serial)
edge_serial,
endpoint->bInterval);
- interrupt_in_found = TRUE;
+ interrupt_in_found = true;
}
- if ((!bulk_in_found) &&
+ if (!bulk_in_found &&
(usb_endpoint_is_bulk_in(endpoint))) {
/* we found a bulk in endpoint */
dbg("found bulk in");
@@ -3001,19 +3001,19 @@ static int edge_startup (struct usb_serial *serial)
endpoint->wMaxPacketSize,
edge_bulk_in_callback,
edge_serial);
- bulk_in_found = TRUE;
+ bulk_in_found = true;
}
- if ((!bulk_out_found) &&
+ if (!bulk_out_found &&
(usb_endpoint_is_bulk_out(endpoint))) {
/* we found a bulk out endpoint */
dbg("found bulk out");
edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress;
- bulk_out_found = TRUE;
+ bulk_out_found = true;
}
}
- if ((!interrupt_in_found) || (!bulk_in_found) || (!bulk_out_found)) {
+ if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
err ("Error - the proper endpoints were not found!");
return -ENODEV;
}
@@ -3083,6 +3083,7 @@ static int __init edgeport_init(void)
retval = usb_register(&io_driver);
if (retval)
goto failed_usb_register;
+ atomic_set(&CmdUrbs, 0);
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index 29a913a6daca..cb201c1f67f9 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -19,12 +19,6 @@
#define MAX_RS232_PORTS 8 /* Max # of RS-232 ports per device */
/* typedefs that the insideout headers need */
-#ifndef TRUE
- #define TRUE (1)
-#endif
-#ifndef FALSE
- #define FALSE (0)
-#endif
#ifndef LOW8
#define LOW8(a) ((unsigned char)(a & 0xff))
#endif
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index d16e2e1764ad..4df0ec74e0b1 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -255,6 +255,7 @@ static struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */
{ USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */
+ { USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */
{ USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */
{ USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b2097c45a235..7b085f334ceb 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -238,7 +238,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
if (rc < 0)
err("Reading line status failed (error = %d)", rc);
else {
- status = status_buf[0] + (status_buf[1]<<8);
+ status = le16_to_cpu(*(u16 *)status_buf);
info("%s - read status %x %x", __FUNCTION__,
status_buf[0], status_buf[1]);
@@ -257,7 +257,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
static int klsi_105_startup (struct usb_serial *serial)
{
struct klsi_105_private *priv;
- int i;
+ int i, j;
/* check if we support the product id (see keyspan.c)
* FIXME
@@ -265,12 +265,12 @@ static int klsi_105_startup (struct usb_serial *serial)
/* allocate the private data structure */
for (i=0; i<serial->num_ports; i++) {
- int j;
priv = kmalloc(sizeof(struct klsi_105_private),
GFP_KERNEL);
if (!priv) {
dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__);
- return -ENOMEM;
+ i--;
+ goto err_cleanup;
}
/* set initial values for control structures */
priv->cfg.pktlen = 5;
@@ -292,15 +292,14 @@ static int klsi_105_startup (struct usb_serial *serial)
priv->write_urb_pool[j] = urb;
if (urb == NULL) {
err("No more urbs???");
- continue;
+ goto err_cleanup;
}
- urb->transfer_buffer = NULL;
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE,
GFP_KERNEL);
if (!urb->transfer_buffer) {
err("%s - out of memory for urb buffers.", __FUNCTION__);
- continue;
+ goto err_cleanup;
}
}
@@ -308,7 +307,20 @@ static int klsi_105_startup (struct usb_serial *serial)
init_waitqueue_head(&serial->port[i]->write_wait);
}
- return (0);
+ return 0;
+
+err_cleanup:
+ for (; i >= 0; i--) {
+ priv = usb_get_serial_port_data(serial->port[i]);
+ for (j=0; j < NUM_URBS; j++) {
+ if (priv->write_urb_pool[j]) {
+ kfree(priv->write_urb_pool[j]->transfer_buffer);
+ usb_free_urb(priv->write_urb_pool[j]);
+ }
+ }
+ usb_set_serial_port_data(serial->port[i], NULL);
+ }
+ return -ENOMEM;
} /* klsi_105_startup */
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 4cd839b1407f..3db1adc25f84 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -438,17 +438,21 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp)
if (retval) {
err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
port->read_urb->pipe, retval);
- goto exit;
+ goto error;
}
port->interrupt_in_urb->dev = port->serial->dev;
retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (retval)
+ if (retval) {
+ usb_kill_urb(port->read_urb);
err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
port->interrupt_in_urb->pipe, retval);
-
-exit:
+ goto error;
+ }
return 0;
+
+error:
+ return retval;
} /* mct_u232_open */
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 19bf403f9db2..b563e2ad8728 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -103,11 +103,9 @@ static void mos7720_interrupt_callback(struct urb *urb)
{
int result;
int length;
- __u32 *data;
- unsigned int status;
+ __u8 *data;
__u8 sp1;
__u8 sp2;
- __u8 st;
dbg("%s"," : Entering\n");
@@ -141,18 +139,19 @@ static void mos7720_interrupt_callback(struct urb *urb)
* Byte 2 IIR Port 2 (port.number is 1)
* Byte 3 --------------
* Byte 4 FIFO status for both */
- if (length && length > 4) {
+
+ /* the above description is inverted
+ * oneukum 2007-03-14 */
+
+ if (unlikely(length != 4)) {
dbg("Wrong data !!!");
return;
}
- status = *data;
-
- sp1 = (status & 0xff000000)>>24;
- sp2 = (status & 0x00ff0000)>>16;
- st = status & 0x000000ff;
+ sp1 = data[3];
+ sp2 = data[2];
- if ((sp1 & 0x01) || (sp2 & 0x01)) {
+ if ((sp1 | sp2) & 0x01) {
/* No Interrupt Pending in both the ports */
dbg("No Interrupt !!!");
} else {
@@ -333,6 +332,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
int response;
int port_number;
char data;
+ int allocated_urbs = 0;
int j;
serial = port->serial;
@@ -353,7 +353,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0,GFP_ATOMIC);
+ urb = usb_alloc_urb(0,GFP_KERNEL);
mos7720_port->write_urb_pool[j] = urb;
if (urb == NULL) {
@@ -365,10 +365,16 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp)
GFP_KERNEL);
if (!urb->transfer_buffer) {
err("%s-out of memory for urb buffers.", __FUNCTION__);
+ usb_free_urb(mos7720_port->write_urb_pool[j]);
+ mos7720_port->write_urb_pool[j] = NULL;
continue;
}
+ allocated_urbs++;
}
+ if (!allocated_urbs)
+ return -ENOMEM;
+
/* Initialize MCS7720 -- Write Init values to corresponding Registers
*
* Register Index
@@ -526,7 +532,7 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port)
}
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
+ if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS)
chars += URB_TRANSFER_BUFFER_SIZE;
}
dbg("%s - returns %d", __FUNCTION__, chars);
@@ -629,7 +635,7 @@ static int mos7720_write_room(struct usb_serial_port *port)
}
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
+ if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS)
room += URB_TRANSFER_BUFFER_SIZE;
}
@@ -664,7 +670,7 @@ static int mos7720_write(struct usb_serial_port *port,
urb = NULL;
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) {
urb = mos7720_port->write_urb_pool[i];
dbg("URB:%d",i);
break;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c6cca859af45..2366e7b63ece 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -176,9 +176,12 @@ struct moschip_port {
int port_num; /*Actual port number in the device(1,2,etc) */
struct urb *write_urb; /* write URB for this port */
struct urb *read_urb; /* read URB for this port */
+ struct urb *int_urb;
__u8 shadowLCR; /* last LCR value received */
__u8 shadowMCR; /* last MCR value received */
char open;
+ char open_ports;
+ char zombie;
wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */
int delta_msr_cond;
@@ -191,17 +194,17 @@ struct moschip_port {
__u8 DcrRegOffset;
//for processing control URBS in interrupt context
struct urb *control_urb;
+ struct usb_ctrlrequest *dr;
char *ctrl_buf;
int MsrLsr;
+ spinlock_t pool_lock;
struct urb *write_urb_pool[NUM_URBS];
+ char busy[NUM_URBS];
};
static int debug;
-static int mos7840_num_ports; //this says the number of ports in the device
-static int mos7840_num_open_ports;
-
/*
* mos7840_set_reg_sync
@@ -254,7 +257,7 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
struct usb_device *dev = port->serial->dev;
val = val & 0x00ff;
// For the UART control registers, the application number need to be Or'ed
- if (mos7840_num_ports == 4) {
+ if (port->serial->num_ports == 4) {
val |=
(((__u16) port->number - (__u16) (port->serial->minor)) +
1) << 8;
@@ -294,7 +297,7 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
//dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8);
/*Wval is same as application number */
- if (mos7840_num_ports == 4) {
+ if (port->serial->num_ports == 4) {
Wval =
(((__u16) port->number - (__u16) (port->serial->minor)) +
1) << 8;
@@ -352,7 +355,7 @@ static inline struct moschip_port *mos7840_get_port_private(struct
return (struct moschip_port *)usb_get_serial_port_data(port);
}
-static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
+static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
{
struct moschip_port *mos7840_port;
struct async_icount *icount;
@@ -366,22 +369,24 @@ static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
/* update input line counters */
if (new_msr & MOS_MSR_DELTA_CTS) {
icount->cts++;
+ smp_wmb();
}
if (new_msr & MOS_MSR_DELTA_DSR) {
icount->dsr++;
+ smp_wmb();
}
if (new_msr & MOS_MSR_DELTA_CD) {
icount->dcd++;
+ smp_wmb();
}
if (new_msr & MOS_MSR_DELTA_RI) {
icount->rng++;
+ smp_wmb();
}
}
-
- return 0;
}
-static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
+static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
{
struct async_icount *icount;
@@ -400,18 +405,20 @@ static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
icount = &port->icount;
if (new_lsr & SERIAL_LSR_BI) {
icount->brk++;
+ smp_wmb();
}
if (new_lsr & SERIAL_LSR_OE) {
icount->overrun++;
+ smp_wmb();
}
if (new_lsr & SERIAL_LSR_PE) {
icount->parity++;
+ smp_wmb();
}
if (new_lsr & SERIAL_LSR_FE) {
icount->frame++;
+ smp_wmb();
}
-
- return 0;
}
/************************************************************************/
@@ -426,12 +433,15 @@ static void mos7840_control_callback(struct urb *urb)
unsigned char *data;
struct moschip_port *mos7840_port;
__u8 regval = 0x0;
+ int result = 0;
if (!urb) {
dbg("%s", "Invalid Pointer !!!!:\n");
return;
}
+ mos7840_port = (struct moschip_port *)urb->context;
+
switch (urb->status) {
case 0:
/* success */
@@ -449,8 +459,6 @@ static void mos7840_control_callback(struct urb *urb)
goto exit;
}
- mos7840_port = (struct moschip_port *)urb->context;
-
dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length);
dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__,
mos7840_port->MsrLsr, mos7840_port->port_num);
@@ -462,21 +470,26 @@ static void mos7840_control_callback(struct urb *urb)
else if (mos7840_port->MsrLsr == 1)
mos7840_handle_new_lsr(mos7840_port, regval);
- exit:
- return;
+exit:
+ spin_lock(&mos7840_port->pool_lock);
+ if (!mos7840_port->zombie)
+ result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC);
+ spin_unlock(&mos7840_port->pool_lock);
+ if (result) {
+ dev_err(&urb->dev->dev,
+ "%s - Error %d submitting interrupt urb\n",
+ __FUNCTION__, result);
+ }
}
static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
__u16 * val)
{
struct usb_device *dev = mcs->port->serial->dev;
- struct usb_ctrlrequest *dr = NULL;
- unsigned char *buffer = NULL;
- int ret = 0;
- buffer = (__u8 *) mcs->ctrl_buf;
+ struct usb_ctrlrequest *dr = mcs->dr;
+ unsigned char *buffer = mcs->ctrl_buf;
+ int ret;
-// dr=(struct usb_ctrlrequest *)(buffer);
- dr = (void *)(buffer + 2);
dr->bRequestType = MCS_RD_RTYPE;
dr->bRequest = MCS_RDREQ;
dr->wValue = cpu_to_le16(Wval); //0;
@@ -506,8 +519,8 @@ static void mos7840_interrupt_callback(struct urb *urb)
__u16 Data;
unsigned char *data;
__u8 sp[5], st;
- int i;
- __u16 wval;
+ int i, rv = 0;
+ __u16 wval, wreg = 0;
dbg("%s", " : Entering\n");
if (!urb) {
@@ -569,31 +582,34 @@ static void mos7840_interrupt_callback(struct urb *urb)
dbg("Serial Port %d: Receiver status error or ", i);
dbg("address bit detected in 9-bit mode\n");
mos7840_port->MsrLsr = 1;
- mos7840_get_reg(mos7840_port, wval,
- LINE_STATUS_REGISTER,
- &Data);
+ wreg = LINE_STATUS_REGISTER;
break;
case SERIAL_IIR_MS:
dbg("Serial Port %d: Modem status change\n", i);
mos7840_port->MsrLsr = 0;
- mos7840_get_reg(mos7840_port, wval,
- MODEM_STATUS_REGISTER,
- &Data);
+ wreg = MODEM_STATUS_REGISTER;
break;
}
+ spin_lock(&mos7840_port->pool_lock);
+ if (!mos7840_port->zombie) {
+ rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
+ } else {
+ spin_unlock(&mos7840_port->pool_lock);
+ return;
+ }
+ spin_unlock(&mos7840_port->pool_lock);
}
}
}
- exit:
+ if (!(rv < 0)) /* the completion handler for the control urb will resubmit */
+ return;
+exit:
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&urb->dev->dev,
"%s - Error %d submitting interrupt urb\n",
__FUNCTION__, result);
}
-
- return;
-
}
static int mos7840_port_paranoia_check(struct usb_serial_port *port,
@@ -634,7 +650,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
if (!port ||
mos7840_port_paranoia_check(port, function) ||
mos7840_serial_paranoia_check(port->serial, function)) {
- /* then say that we don't have a valid usb_serial thing, which will * end up genrating -ENODEV return values */
+ /* then say that we don't have a valid usb_serial thing, which will
+ * end up genrating -ENODEV return values */
return NULL;
}
@@ -699,6 +716,7 @@ static void mos7840_bulk_in_callback(struct urb *urb)
tty_flip_buffer_push(tty);
}
mos7840_port->icount.rx += urb->actual_length;
+ smp_wmb();
dbg("mos7840_port->icount.rx is %d:\n",
mos7840_port->icount.rx);
}
@@ -708,15 +726,14 @@ static void mos7840_bulk_in_callback(struct urb *urb)
return;
}
- if (mos7840_port->read_urb->status != -EINPROGRESS) {
- mos7840_port->read_urb->dev = serial->dev;
- status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+ mos7840_port->read_urb->dev = serial->dev;
- if (status) {
- dbg(" usb_submit_urb(read bulk) failed, status = %d",
- status);
- }
+ status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
+
+ if (status) {
+ dbg(" usb_submit_urb(read bulk) failed, status = %d",
+ status);
}
}
@@ -730,17 +747,28 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
{
struct moschip_port *mos7840_port;
struct tty_struct *tty;
+ int i;
+
if (!urb) {
dbg("%s", "Invalid Pointer !!!!:\n");
return;
}
+ mos7840_port = (struct moschip_port *)urb->context;
+ spin_lock(&mos7840_port->pool_lock);
+ for (i = 0; i < NUM_URBS; i++) {
+ if (urb == mos7840_port->write_urb_pool[i]) {
+ mos7840_port->busy[i] = 0;
+ break;
+ }
+ }
+ spin_unlock(&mos7840_port->pool_lock);
+
if (urb->status) {
dbg("nonzero write bulk status received:%d\n", urb->status);
return;
}
- mos7840_port = (struct moschip_port *)urb->context;
if (!mos7840_port) {
dbg("%s", "NULL mos7840_port pointer \n");
return;
@@ -792,13 +820,13 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
__u16 Data;
int status;
struct moschip_port *mos7840_port;
+ struct moschip_port *port0;
if (mos7840_port_paranoia_check(port, __FUNCTION__)) {
dbg("%s", "Port Paranoia failed \n");
return -ENODEV;
}
- mos7840_num_open_ports++;
serial = port->serial;
if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) {
@@ -807,16 +835,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
}
mos7840_port = mos7840_get_port_private(port);
+ port0 = mos7840_get_port_private(serial->port[0]);
- if (mos7840_port == NULL)
+ if (mos7840_port == NULL || port0 == NULL)
return -ENODEV;
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
+ port0->open_ports++;
/* Initialising the write urb pool */
for (j = 0; j < NUM_URBS; ++j) {
- urb = usb_alloc_urb(0, GFP_ATOMIC);
+ urb = usb_alloc_urb(0, GFP_KERNEL);
mos7840_port->write_urb_pool[j] = urb;
if (urb == NULL) {
@@ -824,10 +854,10 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
continue;
}
- urb->transfer_buffer = NULL;
- urb->transfer_buffer =
- kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
+ urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
+ usb_free_urb(urb);
+ mos7840_port->write_urb_pool[j] = NULL;
err("%s-out of memory for urb buffers.", __FUNCTION__);
continue;
}
@@ -879,9 +909,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
}
Data |= 0x08; //Driver done bit
Data |= 0x20; //rx_disable
- status = 0;
- status =
- mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
+ status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data);
if (status < 0) {
dbg("writing Controlreg failed\n");
return -1;
@@ -893,7 +921,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
////////////////////////////////////
Data = 0x00;
- status = 0;
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
dbg("disableing interrupts failed\n");
@@ -901,7 +928,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
}
// Set FIFO_CONTROL_REGISTER to the default value
Data = 0x00;
- status = 0;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
@@ -909,7 +935,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
}
Data = 0xcf;
- status = 0;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dbg("Writing FIFO_CONTROL_REGISTER failed\n");
@@ -917,22 +942,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
}
Data = 0x03;
- status = 0;
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
mos7840_port->shadowLCR = Data;
Data = 0x0b;
- status = 0;
status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
mos7840_port->shadowMCR = Data;
Data = 0x00;
- status = 0;
status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
mos7840_port->shadowLCR = Data;
Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80
- status = 0;
status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
Data = 0x0c;
@@ -999,7 +1020,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp)
/* Check to see if we've set up our endpoint info yet *
* (can't set it up in mos7840_startup as the structures *
* were not set up at that time.) */
- if (mos7840_num_open_ports == 1) {
+ if (port0->open_ports == 1) {
if (serial->port[0]->interrupt_in_buffer == NULL) {
/* set up interrupt urb */
@@ -1097,6 +1118,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
{
int i;
int chars = 0;
+ unsigned long flags;
struct moschip_port *mos7840_port;
dbg("%s \n", " mos7840_chars_in_buffer:entering ...........");
@@ -1112,13 +1134,15 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port)
return -1;
}
+ spin_lock_irqsave(&mos7840_port->pool_lock,flags);
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7840_port->write_urb_pool[i]->status == -EINPROGRESS) {
+ if (mos7840_port->busy[i]) {
chars += URB_TRANSFER_BUFFER_SIZE;
}
}
+ spin_unlock_irqrestore(&mos7840_port->pool_lock,flags);
dbg("%s - returns %d", __FUNCTION__, chars);
- return (chars);
+ return chars;
}
@@ -1172,6 +1196,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial;
struct moschip_port *mos7840_port;
+ struct moschip_port *port0;
int j;
__u16 Data;
@@ -1189,10 +1214,10 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
}
mos7840_port = mos7840_get_port_private(port);
+ port0 = mos7840_get_port_private(serial->port[0]);
- if (mos7840_port == NULL) {
+ if (mos7840_port == NULL || port0 == NULL)
return;
- }
for (j = 0; j < NUM_URBS; ++j)
usb_kill_urb(mos7840_port->write_urb_pool[j]);
@@ -1234,12 +1259,13 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp)
}
// if(mos7840_port->ctrl_buf != NULL)
// kfree(mos7840_port->ctrl_buf);
- mos7840_num_open_ports--;
+ port0->open_ports--;
dbg("mos7840_num_open_ports in close%d:in port%d\n",
- mos7840_num_open_ports, port->number);
- if (mos7840_num_open_ports == 0) {
+ port0->open_ports, port->number);
+ if (port0->open_ports == 0) {
if (serial->port[0]->interrupt_in_urb) {
dbg("%s", "Shutdown interrupt_in_urb\n");
+ usb_kill_urb(serial->port[0]->interrupt_in_urb);
}
}
@@ -1368,6 +1394,7 @@ static int mos7840_write_room(struct usb_serial_port *port)
{
int i;
int room = 0;
+ unsigned long flags;
struct moschip_port *mos7840_port;
dbg("%s \n", " mos7840_write_room:entering ...........");
@@ -1384,14 +1411,17 @@ static int mos7840_write_room(struct usb_serial_port *port)
return -1;
}
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ if (!mos7840_port->busy[i]) {
room += URB_TRANSFER_BUFFER_SIZE;
}
}
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+ room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
dbg("%s - returns %d", __FUNCTION__, room);
- return (room);
+ return room;
}
@@ -1410,6 +1440,7 @@ static int mos7840_write(struct usb_serial_port *port,
int i;
int bytes_sent = 0;
int transfer_size;
+ unsigned long flags;
struct moschip_port *mos7840_port;
struct usb_serial *serial;
@@ -1476,13 +1507,16 @@ static int mos7840_write(struct usb_serial_port *port,
/* try to find a free urb in the list */
urb = NULL;
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
for (i = 0; i < NUM_URBS; ++i) {
- if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) {
+ if (!mos7840_port->busy[i]) {
+ mos7840_port->busy[i] = 1;
urb = mos7840_port->write_urb_pool[i];
dbg("\nURB:%d", i);
break;
}
}
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
if (urb == NULL) {
dbg("%s - no more free urbs", __FUNCTION__);
@@ -1518,6 +1552,7 @@ static int mos7840_write(struct usb_serial_port *port,
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
+ mos7840_port->busy[i] = 0;
err("%s - usb_submit_urb(write bulk) failed with status = %d",
__FUNCTION__, status);
bytes_sent = status;
@@ -1525,6 +1560,7 @@ static int mos7840_write(struct usb_serial_port *port,
}
bytes_sent = transfer_size;
mos7840_port->icount.tx += transfer_size;
+ smp_wmb();
dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
exit:
@@ -2490,6 +2526,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
if (signal_pending(current))
return -ERESTARTSYS;
cnow = mos7840_port->icount;
+ smp_rmb();
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
return -EIO; /* no change => error */
@@ -2506,6 +2543,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
case TIOCGICOUNT:
cnow = mos7840_port->icount;
+ smp_rmb();
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
@@ -2535,19 +2573,18 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file,
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
+ int mos7840_num_ports = 0;
dbg("numberofendpoints: %d \n",
(int)serial->interface->cur_altsetting->desc.bNumEndpoints);
dbg("numberofendpoints: %d \n",
(int)serial->interface->altsetting->desc.bNumEndpoints);
if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) {
- mos7840_num_ports = 2;
- serial->type->num_ports = 2;
+ mos7840_num_ports = serial->num_ports = 2;
} else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) {
- mos7840_num_ports = 4;
- serial->type->num_bulk_in = 4;
- serial->type->num_bulk_out = 4;
- serial->type->num_ports = 4;
+ serial->num_bulk_in = 4;
+ serial->num_bulk_out = 4;
+ mos7840_num_ports = serial->num_ports = 4;
}
return mos7840_num_ports;
@@ -2583,7 +2620,9 @@ static int mos7840_startup(struct usb_serial *serial)
mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
if (mos7840_port == NULL) {
err("%s - Out of memory", __FUNCTION__);
- return -ENOMEM;
+ status = -ENOMEM;
+ i--; /* don't follow NULL pointer cleaning up */
+ goto error;
}
/* Initialize all port interrupt end point to port 0 int endpoint *
@@ -2591,6 +2630,7 @@ static int mos7840_startup(struct usb_serial *serial)
mos7840_port->port = serial->port[i];
mos7840_set_port_private(serial->port[i], mos7840_port);
+ spin_lock_init(&mos7840_port->pool_lock);
mos7840_port->port_num = ((serial->port[i]->number -
(serial->port[i]->serial->minor)) +
@@ -2601,22 +2641,22 @@ static int mos7840_startup(struct usb_serial *serial)
mos7840_port->ControlRegOffset = 0x1;
mos7840_port->DcrRegOffset = 0x4;
} else if ((mos7840_port->port_num == 2)
- && (mos7840_num_ports == 4)) {
+ && (serial->num_ports == 4)) {
mos7840_port->SpRegOffset = 0x8;
mos7840_port->ControlRegOffset = 0x9;
mos7840_port->DcrRegOffset = 0x16;
} else if ((mos7840_port->port_num == 2)
- && (mos7840_num_ports == 2)) {
+ && (serial->num_ports == 2)) {
mos7840_port->SpRegOffset = 0xa;
mos7840_port->ControlRegOffset = 0xb;
mos7840_port->DcrRegOffset = 0x19;
} else if ((mos7840_port->port_num == 3)
- && (mos7840_num_ports == 4)) {
+ && (serial->num_ports == 4)) {
mos7840_port->SpRegOffset = 0xa;
mos7840_port->ControlRegOffset = 0xb;
mos7840_port->DcrRegOffset = 0x19;
} else if ((mos7840_port->port_num == 4)
- && (mos7840_num_ports == 4)) {
+ && (serial->num_ports == 4)) {
mos7840_port->SpRegOffset = 0xc;
mos7840_port->ControlRegOffset = 0xd;
mos7840_port->DcrRegOffset = 0x1c;
@@ -2701,21 +2741,19 @@ static int mos7840_startup(struct usb_serial *serial)
dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status);
Data = 0x20;
- status = 0;
status =
mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
Data);
if (status < 0) {
dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n",
status);
- break;
+ goto error;
} else
dbg("CLK_MULTI_REGISTER Writing success status%d\n",
status);
//write value 0x0 to scratchpad register
Data = 0x00;
- status = 0;
status =
mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER,
Data);
@@ -2729,7 +2767,7 @@ static int mos7840_startup(struct usb_serial *serial)
//Zero Length flag register
if ((mos7840_port->port_num != 1)
- && (mos7840_num_ports == 2)) {
+ && (serial->num_ports == 2)) {
Data = 0xff;
status = 0;
@@ -2770,14 +2808,17 @@ static int mos7840_startup(struct usb_serial *serial)
i + 1, status);
}
- mos7840_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
+ mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
+ mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) {
+ status = -ENOMEM;
+ goto error;
+ }
}
//Zero Length flag enable
Data = 0x0f;
- status = 0;
status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
if (status < 0) {
dbg("Writing ZLP_REG5 failed status-0x%x\n", status);
@@ -2789,6 +2830,17 @@ static int mos7840_startup(struct usb_serial *serial)
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
return 0;
+error:
+ for (/* nothing */; i >= 0; i--) {
+ mos7840_port = mos7840_get_port_private(serial->port[i]);
+
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port->ctrl_buf);
+ usb_free_urb(mos7840_port->control_urb);
+ kfree(mos7840_port);
+ serial->port[i] = NULL;
+ }
+ return status;
}
/****************************************************************************
@@ -2799,6 +2851,7 @@ static int mos7840_startup(struct usb_serial *serial)
static void mos7840_shutdown(struct usb_serial *serial)
{
int i;
+ unsigned long flags;
struct moschip_port *mos7840_port;
dbg("%s \n", " shutdown :entering..........");
@@ -2814,8 +2867,12 @@ static void mos7840_shutdown(struct usb_serial *serial)
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- kfree(mos7840_port->ctrl_buf);
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+ mos7840_port->zombie = 1;
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
kfree(mos7840_port);
mos7840_set_port_private(serial->port[i], NULL);
}
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 0216ac12a27d..4adfab988e86 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -69,6 +69,7 @@ static void omninet_write_bulk_callback (struct urb *urb);
static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count);
static int omninet_write_room (struct usb_serial_port *port);
static void omninet_shutdown (struct usb_serial *serial);
+static int omninet_attach (struct usb_serial *serial);
static struct usb_device_id id_table [] = {
{ USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) },
@@ -99,6 +100,7 @@ static struct usb_serial_driver zyxel_omninet_device = {
.num_bulk_in = 1,
.num_bulk_out = 2,
.num_ports = 1,
+ .attach = omninet_attach,
.open = omninet_open,
.close = omninet_close,
.write = omninet_write,
@@ -145,22 +147,30 @@ struct omninet_data
__u8 od_outseq; // Sequence number for bulk_out URBs
};
+static int omninet_attach (struct usb_serial *serial)
+{
+ struct omninet_data *od;
+ struct usb_serial_port *port = serial->port[0];
+
+ od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL );
+ if( !od ) {
+ err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data));
+ return -ENOMEM;
+ }
+ usb_set_serial_port_data(port, od);
+ return 0;
+}
+
static int omninet_open (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
struct usb_serial_port *wport;
- struct omninet_data *od;
+ struct omninet_data *od = usb_get_serial_port_data(port);
int result = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL );
- if( !od ) {
- err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data));
- return -ENOMEM;
- }
-
- usb_set_serial_port_data(port, od);
wport = serial->port[1];
wport->tty = port->tty;
@@ -170,24 +180,17 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp)
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
omninet_read_bulk_callback, port);
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (result)
+ if (result) {
err("%s - failed submitting read urb, error %d", __FUNCTION__, result);
+ }
return result;
}
static void omninet_close (struct usb_serial_port *port, struct file * filp)
{
- struct usb_serial *serial = port->serial;
- struct usb_serial_port *wport;
-
dbg("%s - port %d", __FUNCTION__, port->number);
-
- wport = serial->port[1];
- usb_kill_urb(wport->write_urb);
usb_kill_urb(port->read_urb);
-
- kfree(usb_get_serial_port_data(port));
}
@@ -326,7 +329,12 @@ static void omninet_write_bulk_callback (struct urb *urb)
static void omninet_shutdown (struct usb_serial *serial)
{
+ struct usb_serial_port *wport = serial->port[1];
+ struct usb_serial_port *port = serial->port[0];
dbg ("%s", __FUNCTION__);
+
+ usb_kill_urb(wport->write_urb);
+ kfree(usb_get_serial_port_data(port));
}
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e178e6f40319..8c3f55b080b4 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -113,6 +113,12 @@ static int option_send_setup(struct usb_serial_port *port);
#define ANYDATA_VENDOR_ID 0x16d5
#define ANYDATA_PRODUCT_ID 0x6501
+#define BANDRICH_VENDOR_ID 0x1A8D
+#define BANDRICH_PRODUCT_C100_1 0x1002
+#define BANDRICH_PRODUCT_C100_2 0x1003
+
+#define DELL_VENDOR_ID 0x413C
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -165,6 +171,9 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) },
+ { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
+ { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
+ { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -591,12 +600,6 @@ static int option_open(struct usb_serial_port *port, struct file *filp)
return (0);
}
-static inline void stop_urb(struct urb *urb)
-{
- if (urb && urb->status == -EINPROGRESS)
- usb_kill_urb(urb);
-}
-
static void option_close(struct usb_serial_port *port, struct file *filp)
{
int i;
@@ -614,9 +617,9 @@ static void option_close(struct usb_serial_port *port, struct file *filp)
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
- stop_urb(portdata->in_urbs[i]);
+ usb_kill_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
- stop_urb(portdata->out_urbs[i]);
+ usb_kill_urb(portdata->out_urbs[i]);
}
port->tty = NULL;
}
@@ -747,9 +750,9 @@ static void option_shutdown(struct usb_serial *serial)
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
for (j = 0; j < N_IN_URB; j++)
- stop_urb(portdata->in_urbs[j]);
+ usb_kill_urb(portdata->in_urbs[j]);
for (j = 0; j < N_OUT_URB; j++)
- stop_urb(portdata->out_urbs[j]);
+ usb_kill_urb(portdata->out_urbs[j]);
}
/* Now free them */
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ecedd833818d..644607de4c11 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -456,12 +456,6 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp)
return (0);
}
-static inline void stop_urb(struct urb *urb)
-{
- if (urb && urb->status == -EINPROGRESS)
- usb_kill_urb(urb);
-}
-
static void sierra_close(struct usb_serial_port *port, struct file *filp)
{
int i;
@@ -479,9 +473,9 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp)
/* Stop reading/writing urbs */
for (i = 0; i < N_IN_URB; i++)
- stop_urb(portdata->in_urbs[i]);
+ usb_unlink_urb(portdata->in_urbs[i]);
for (i = 0; i < N_OUT_URB; i++)
- stop_urb(portdata->out_urbs[i]);
+ usb_unlink_urb(portdata->out_urbs[i]);
}
port->tty = NULL;
}
@@ -583,17 +577,26 @@ static void sierra_shutdown(struct usb_serial *serial)
/* Stop reading/writing urbs */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
+ if (!port)
+ continue;
portdata = usb_get_serial_port_data(port);
+ if (!portdata)
+ continue;
+
for (j = 0; j < N_IN_URB; j++)
- stop_urb(portdata->in_urbs[j]);
+ usb_unlink_urb(portdata->in_urbs[j]);
for (j = 0; j < N_OUT_URB; j++)
- stop_urb(portdata->out_urbs[j]);
+ usb_unlink_urb(portdata->out_urbs[j]);
}
/* Now free them */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
+ if (!port)
+ continue;
portdata = usb_get_serial_port_data(port);
+ if (!portdata)
+ continue;
for (j = 0; j < N_IN_URB; j++) {
if (portdata->in_urbs[j]) {
@@ -612,6 +615,8 @@ static void sierra_shutdown(struct usb_serial *serial)
/* Now free per port private data */
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
+ if (!port)
+ continue;
kfree(usb_get_serial_port_data(port));
}
}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index 2f59ff226e2c..ffbe601cde2a 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -384,19 +384,21 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
dbg("%s - write limit hit\n", __FUNCTION__);
return 0;
}
+ priv->outstanding_urbs++;
spin_unlock_irqrestore(&priv->lock, flags);
buffer = kmalloc (count, GFP_ATOMIC);
if (!buffer) {
dev_err(&port->dev, "out of memory\n");
- return -ENOMEM;
+ count = -ENOMEM;
+ goto error_no_buffer;
}
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
dev_err(&port->dev, "no more free urbs\n");
- kfree (buffer);
- return -ENOMEM;
+ count = -ENOMEM;
+ goto error_no_urb;
}
memcpy (buffer, buf, count);
@@ -415,19 +417,27 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf,
dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n",
__FUNCTION__, status);
count = status;
- kfree (buffer);
+ goto error;
} else {
spin_lock_irqsave(&priv->lock, flags);
- ++priv->outstanding_urbs;
priv->bytes_out += count;
spin_unlock_irqrestore(&priv->lock, flags);
}
/* we are done with this urb, so let the host driver
* really free it when it is finished with it */
- usb_free_urb (urb);
+ usb_free_urb(urb);
return count;
+error:
+ usb_free_urb(urb);
+error_no_urb:
+ kfree(buffer);
+error_no_buffer:
+ spin_lock_irqsave(&priv->lock, flags);
+ --priv->outstanding_urbs;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ return count;
}
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index bf16e9e1d84e..27c5f8f9a2d5 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1109,7 +1109,7 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 *
command_port = port->serial->port[COMMAND_PORT];
command_info = usb_get_serial_port_data(command_port);
spin_lock_irqsave(&command_info->lock, flags);
- command_info->command_finished = FALSE;
+ command_info->command_finished = false;
transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer;
transfer_buffer[0] = command;
@@ -1124,12 +1124,12 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 *
spin_unlock_irqrestore(&command_info->lock, flags);
/* wait for the command to complete */
- wait_event_interruptible_timeout(command_info->wait_command,
- (command_info->command_finished != FALSE), COMMAND_TIMEOUT);
+ wait_event_interruptible_timeout(command_info->wait_command,
+ (bool)command_info->command_finished, COMMAND_TIMEOUT);
spin_lock_irqsave(&command_info->lock, flags);
- if (command_info->command_finished == FALSE) {
+ if (command_info->command_finished == false) {
dbg("%s - command timed out.", __FUNCTION__);
retval = -ETIMEDOUT;
goto exit;
diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h
index d714eff58dc0..f16079705664 100644
--- a/drivers/usb/serial/whiteheat.h
+++ b/drivers/usb/serial/whiteheat.h
@@ -20,10 +20,6 @@
#define __LINUX_USB_SERIAL_WHITEHEAT_H
-#define FALSE 0
-#define TRUE 1
-
-
/* WhiteHEAT commands */
#define WHITEHEAT_OPEN 1 /* open the port */
#define WHITEHEAT_CLOSE 2 /* close the port */
diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c
index 599ad10a761b..06d1107dbd47 100644
--- a/drivers/usb/storage/libusual.c
+++ b/drivers/usb/storage/libusual.c
@@ -117,6 +117,7 @@ EXPORT_SYMBOL_GPL(usb_usual_check_type);
static int usu_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
+ int rc;
unsigned long type;
struct task_struct* task;
unsigned long flags;
@@ -135,7 +136,7 @@ static int usu_probe(struct usb_interface *intf,
task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type);
if (IS_ERR(task)) {
- int rc = PTR_ERR(task);
+ rc = PTR_ERR(task);
printk(KERN_WARNING "libusual: "
"Unable to start the thread for %s: %d\n",
bias_names[type], rc);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4a9d0d5c7282..8b3145ab7757 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1371,15 +1371,6 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* This prevents the kernel from detecting the virtual cd-drive with the
- * Windows drivers. <johann.wilhelm@student.tugraz.at>
-*/
-UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff,
- "HUAWEI",
- "E220 USB-UMTS Install",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_DEVICE),
-
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001,
"Minolta",
diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c
index 46929a1b6f24..8432bf171d2e 100644
--- a/drivers/usb/usb-skeleton.c
+++ b/drivers/usb/usb-skeleton.c
@@ -34,18 +34,25 @@ static struct usb_device_id skel_table [] = {
};
MODULE_DEVICE_TABLE(usb, skel_table);
+/* to prevent a race between open and disconnect */
+static DEFINE_MUTEX(skel_open_lock);
+
/* Get a minor range for your devices from the usb maintainer */
#define USB_SKEL_MINOR_BASE 192
/* our private defines. if this grows any larger, use your own .h file */
#define MAX_TRANSFER (PAGE_SIZE - 512)
+/* MAX_TRANSFER is chosen so that the VM is not stressed by
+ allocations > PAGE_SIZE and the number of packets in a page
+ is an integer 512 is the largest possible packet on EHCI */
#define WRITES_IN_FLIGHT 8
+/* arbitrarily chosen */
/* Structure to hold all of our device specific stuff */
struct usb_skel {
- struct usb_device *dev; /* the usb device for this device */
- struct usb_interface *interface; /* the interface for this device */
+ struct usb_device *udev; /* the usb device for this device */
+ struct usb_interface *interface; /* the interface for this device */
struct semaphore limit_sem; /* limiting the number of writes in progress */
unsigned char *bulk_in_buffer; /* the buffer to receive data */
size_t bulk_in_size; /* the size of the receive buffer */
@@ -76,8 +83,10 @@ static int skel_open(struct inode *inode, struct file *file)
subminor = iminor(inode);
+ mutex_lock(&skel_open_lock);
interface = usb_find_interface(&skel_driver, subminor);
if (!interface) {
+ mutex_unlock(&skel_open_lock);
err ("%s - error, can't find device for minor %d",
__FUNCTION__, subminor);
retval = -ENODEV;
@@ -86,12 +95,15 @@ static int skel_open(struct inode *inode, struct file *file)
dev = usb_get_intfdata(interface);
if (!dev) {
+ mutex_unlock(&skel_open_lock);
retval = -ENODEV;
goto exit;
}
/* increment our usage count for the device */
kref_get(&dev->kref);
+ /* now we can drop the lock */
+ mutex_unlock(&skel_open_lock);
/* prevent the device from being autosuspended */
retval = usb_autopm_get_interface(interface);
@@ -201,12 +213,6 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
goto exit;
}
- mutex_lock(&dev->io_mutex);
- if (!dev->interface) { /* disconnect() was called */
- retval = -ENODEV;
- goto error;
- }
-
/* create a urb, and a buffer for it, and copy the data to the urb */
urb = usb_alloc_urb(0, GFP_KERNEL);
if (!urb) {
@@ -225,6 +231,14 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
goto error;
}
+ /* this lock makes sure we don't submit URBs to gone devices */
+ mutex_lock(&dev->io_mutex);
+ if (!dev->interface) { /* disconnect() was called */
+ mutex_unlock(&dev->io_mutex);
+ retval = -ENODEV;
+ goto error;
+ }
+
/* initialize the urb properly */
usb_fill_bulk_urb(urb, dev->udev,
usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr),
@@ -233,6 +247,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
/* send the data out the bulk port */
retval = usb_submit_urb(urb, GFP_KERNEL);
+ mutex_unlock(&dev->io_mutex);
if (retval) {
err("%s - failed submitting write urb, error %d", __FUNCTION__, retval);
goto error;
@@ -241,7 +256,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou
/* release our reference to this urb, the USB core will eventually free it entirely */
usb_free_urb(urb);
- mutex_unlock(&dev->io_mutex);
+
return writesize;
error:
@@ -249,7 +264,6 @@ error:
usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma);
usb_free_urb(urb);
}
- mutex_unlock(&dev->io_mutex);
up(&dev->limit_sem);
exit:
@@ -344,6 +358,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i
error:
if (dev)
+ /* this frees allocated memory */
kref_put(&dev->kref, skel_delete);
return retval;
}
@@ -354,20 +369,21 @@ static void skel_disconnect(struct usb_interface *interface)
int minor = interface->minor;
/* prevent skel_open() from racing skel_disconnect() */
- lock_kernel();
+ mutex_lock(&skel_open_lock);
dev = usb_get_intfdata(interface);
usb_set_intfdata(interface, NULL);
/* give back our minor */
usb_deregister_dev(interface, &skel_class);
+ mutex_unlock(&skel_open_lock);
/* prevent more I/O from starting */
mutex_lock(&dev->io_mutex);
dev->interface = NULL;
mutex_unlock(&dev->io_mutex);
- unlock_kernel();
+
/* decrement our usage count */
kref_put(&dev->kref, skel_delete);
@@ -380,6 +396,7 @@ static struct usb_driver skel_driver = {
.probe = skel_probe,
.disconnect = skel_disconnect,
.id_table = skel_table,
+ .supports_autosuspend = 1,
};
static int __init usb_skel_init(void)
OpenPOWER on IntegriCloud