diff options
Diffstat (limited to 'drivers/usb')
116 files changed, 4568 insertions, 1833 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 80b4008c89ba..239f050efa35 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -41,7 +41,7 @@ obj-$(CONFIG_USB_MICROTEK) += image/ obj-$(CONFIG_USB_SERIAL) += serial/ obj-$(CONFIG_USB) += misc/ -obj-y += early/ +obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/ obj-$(CONFIG_USB_ATM) += atm/ obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 101ffc965ee0..593fc5e2d2e6 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -564,7 +564,7 @@ static void cxacru_timeout_kill(unsigned long data) } static int cxacru_start_wait_urb(struct urb *urb, struct completion *done, - int* actual_length) + int *actual_length) { struct timer_list timer; @@ -952,7 +952,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, put_unaligned(cpu_to_le32(addr), (__le32 *)(buf + offb)); offb += 4; addr += l; - if(l) + if (l) memcpy(buf + offb, data + offd, l); if (l < stride) memset(buf + offb + l, 0, stride - l); @@ -967,7 +967,7 @@ static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, } offb = 0; } - } while(offd < size); + } while (offd < size); dbg("sent fw %#x", fw); ret = 0; @@ -1043,8 +1043,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, if (instance->modem_type->boot_rom_patch) { val = cpu_to_le32(BR_ADDR); ret = cxacru_fw(usb_dev, FW_WRITE_MEM, 0x2, 0x0, BR_STACK_ADDR, (u8 *) &val, 4); - } - else { + } else { ret = cxacru_fw(usb_dev, FW_GOTO_MEM, 0x0, 0x0, FW_ADDR, NULL, 0); } if (ret) { @@ -1068,7 +1067,7 @@ static void cxacru_upload_firmware(struct cxacru_data *instance, } static int cxacru_find_firmware(struct cxacru_data *instance, - char* phase, const struct firmware **fw_p) + char *phase, const struct firmware **fw_p) { struct usbatm_data *usbatm = instance->usbatm; struct device *dev = &usbatm->usb_intf->dev; diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 80f9617d3a15..4716e707de59 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -753,11 +753,13 @@ static struct usb_driver speedtch_usb_driver = { .id_table = speedtch_usb_ids }; -static void speedtch_release_interfaces(struct usb_device *usb_dev, int num_interfaces) { +static void speedtch_release_interfaces(struct usb_device *usb_dev, + int num_interfaces) +{ struct usb_interface *cur_intf; int i; - for(i = 0; i < num_interfaces; i++) + for (i = 0; i < num_interfaces; i++) if ((cur_intf = usb_ifnum_to_if(usb_dev, i))) { usb_set_intfdata(cur_intf, NULL); usb_driver_release_interface(&speedtch_usb_driver, cur_intf); @@ -792,7 +794,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, /* claim all interfaces */ - for (i=0; i < num_interfaces; i++) { + for (i = 0; i < num_interfaces; i++) { cur_intf = usb_ifnum_to_if(usb_dev, i); if ((i != ifnum) && cur_intf) { @@ -842,7 +844,7 @@ static int speedtch_bind(struct usbatm_data *usbatm, use_isoc = 0; /* fall back to bulk if endpoint not found */ - for (i=0; i<desc->desc.bNumEndpoints; i++) { + for (i = 0; i < desc->desc.bNumEndpoints; i++) { const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc; if ((endpoint_desc->bEndpointAddress == target_address)) { diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index ebae94480140..5b3f555e01c9 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -67,6 +67,7 @@ #include <linux/mutex.h> #include <linux/freezer.h> #include <linux/slab.h> +#include <linux/kernel.h> #include <asm/unaligned.h> @@ -2436,7 +2437,6 @@ UEA_ATTR(firmid, 0); /* Retrieve the device End System Identifier (MAC) */ -#define htoi(x) (isdigit(x) ? x-'0' : toupper(x)-'A'+10) static int uea_getesi(struct uea_softc *sc, u_char * esi) { unsigned char mac_str[2 * ETH_ALEN + 1]; @@ -2447,7 +2447,8 @@ static int uea_getesi(struct uea_softc *sc, u_char * esi) return 1; for (i = 0; i < ETH_ALEN; i++) - esi[i] = htoi(mac_str[2 * i]) * 16 + htoi(mac_str[2 * i + 1]); + esi[i] = hex_to_bin(mac_str[2 * i]) * 16 + + hex_to_bin(mac_str[2 * i + 1]); return 0; } diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 9b53e8df4648..05bf5a27b5b0 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -84,8 +84,8 @@ #ifdef VERBOSE_DEBUG static int usbatm_print_packet(const unsigned char *data, int len); -#define PACKETDEBUG(arg...) usbatm_print_packet (arg) -#define vdbg(arg...) dbg (arg) +#define PACKETDEBUG(arg...) usbatm_print_packet(arg) +#define vdbg(arg...) dbg(arg) #else #define PACKETDEBUG(arg...) #define vdbg(arg...) @@ -273,8 +273,7 @@ static void usbatm_complete(struct urb *urb) if (unlikely(status) && (!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) || - status != -EILSEQ )) - { + status != -EILSEQ)) { if (status == -ESHUTDOWN) return; @@ -494,7 +493,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, ptr += data_len; __skb_pull(skb, data_len); - if(!left) + if (!left) continue; memset(ptr, 0, left); @@ -506,7 +505,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, trailer[2] = ctrl->len >> 8; trailer[3] = ctrl->len; - ctrl->crc = ~ crc32_be(ctrl->crc, ptr, left - 4); + ctrl->crc = ~crc32_be(ctrl->crc, ptr, left - 4); trailer[4] = ctrl->crc >> 24; trailer[5] = ctrl->crc >> 16; @@ -516,8 +515,7 @@ static unsigned int usbatm_write_cells(struct usbatm_data *instance, target[3] |= 0x2; /* adjust PTI */ ctrl->len = 0; /* tag this skb finished */ - } - else + } else ctrl->crc = crc32_be(ctrl->crc, ptr, left); } @@ -1146,7 +1144,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, instance->tx_channel.endpoint = usb_sndbulkpipe(usb_dev, driver->bulk_out); /* tx buffer size must be a positive multiple of the stride */ - instance->tx_channel.buf_size = max (instance->tx_channel.stride, + instance->tx_channel.buf_size = max(instance->tx_channel.stride, snd_buf_bytes - (snd_buf_bytes % instance->tx_channel.stride)); /* rx buffer size must be a positive multiple of the endpoint maxpacket */ @@ -1159,7 +1157,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, goto fail_unbind; } - num_packets = max (1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */ + num_packets = max(1U, (rcv_buf_bytes + maxpacket / 2) / maxpacket); /* round */ if (num_packets * maxpacket > UDSL_MAX_BUF_SIZE) num_packets--; @@ -1262,7 +1260,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, usb_free_urb(instance->urbs[i]); } - kfree (instance); + kfree(instance); return error; } @@ -1390,9 +1388,8 @@ static int usbatm_print_packet(const unsigned char *data, int len) for (i = 0; i < len;) { buffer[0] = '\0'; sprintf(buffer, "%.3d :", i); - for (j = 0; (j < 16) && (i < len); j++, i++) { + for (j = 0; (j < 16) && (i < len); j++, i++) sprintf(buffer, "%s %2.2x", buffer, data[i]); - } dbg("%s", buffer); } return i; diff --git a/drivers/usb/atm/usbatm.h b/drivers/usb/atm/usbatm.h index 0863f85fcc26..5fc489405217 100644 --- a/drivers/usb/atm/usbatm.h +++ b/drivers/usb/atm/usbatm.h @@ -48,7 +48,7 @@ dev_warn(&(instance)->usb_intf->dev, \ "failed assertion '%s' at line %d", \ __stringify(x), __LINE__); \ - } while(0) + } while (0) #endif #define usb_err(instance, format, arg...) \ @@ -59,7 +59,7 @@ dev_warn(&(instance)->usb_intf->dev , format , ## arg) #ifdef DEBUG #define usb_dbg(instance, format, arg...) \ - dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg) + dev_printk(KERN_DEBUG , &(instance)->usb_intf->dev , format , ## arg) #else #define usb_dbg(instance, format, arg...) \ do {} while (0) @@ -104,21 +104,21 @@ struct usbatm_data; /* * Assuming all methods exist and succeed, they are called in this order: * -* bind, heavy_init, atm_start, ..., atm_stop, unbind +* bind, heavy_init, atm_start, ..., atm_stop, unbind */ struct usbatm_driver { const char *driver_name; /* init device ... can sleep, or cause probe() failure */ - int (*bind) (struct usbatm_data *, struct usb_interface *, + int (*bind) (struct usbatm_data *, struct usb_interface *, const struct usb_device_id *id); /* additional device initialization that is too slow to be done in probe() */ - int (*heavy_init) (struct usbatm_data *, struct usb_interface *); + int (*heavy_init) (struct usbatm_data *, struct usb_interface *); /* cleanup device ... can sleep, but can't fail */ - void (*unbind) (struct usbatm_data *, struct usb_interface *); + void (*unbind) (struct usbatm_data *, struct usb_interface *); /* init ATM device ... can sleep, or cause ATM initialization failure */ int (*atm_start) (struct usbatm_data *, struct atm_dev *); @@ -126,9 +126,9 @@ struct usbatm_driver { /* cleanup ATM device ... can sleep, but can't fail */ void (*atm_stop) (struct usbatm_data *, struct atm_dev *); - int bulk_in; /* bulk rx endpoint */ - int isoc_in; /* isochronous rx endpoint */ - int bulk_out; /* bulk tx endpoint */ + int bulk_in; /* bulk rx endpoint */ + int isoc_in; /* isochronous rx endpoint */ + int bulk_out; /* bulk tx endpoint */ unsigned rx_padding; unsigned tx_padding; @@ -156,7 +156,7 @@ struct usbatm_channel { struct usbatm_data { /****************** * public fields * - ******************/ + ******************/ /* mini driver */ struct usbatm_driver *driver; @@ -174,7 +174,7 @@ struct usbatm_data { /******************************** * private fields - do not use * - ********************************/ + ********************************/ struct kref refcount; struct mutex serialize; diff --git a/drivers/usb/atm/xusbatm.c b/drivers/usb/atm/xusbatm.c index 17d167bbd2dc..48ee0c5ff282 100644 --- a/drivers/usb/atm/xusbatm.c +++ b/drivers/usb/atm/xusbatm.c @@ -49,13 +49,13 @@ static struct usbatm_driver xusbatm_drivers[XUSBATM_DRIVERS_MAX]; static struct usb_device_id xusbatm_usb_ids[XUSBATM_DRIVERS_MAX + 1]; static struct usb_driver xusbatm_usb_driver; -static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int altsetting, u8 ep) +static struct usb_interface *xusbatm_find_intf(struct usb_device *usb_dev, int altsetting, u8 ep) { struct usb_host_interface *alt; struct usb_interface *intf; int i, j; - for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) + for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) if ((intf = usb_dev->actconfig->interface[i]) && (alt = usb_altnum_to_altsetting(intf, altsetting))) for (j = 0; j < alt->desc.bNumEndpoints; j++) if (alt->endpoint[j].desc.bEndpointAddress == ep) @@ -63,7 +63,7 @@ static struct usb_interface *xusbatm_find_intf (struct usb_device *usb_dev, int return NULL; } -static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device *usb_dev, +static int xusbatm_capture_intf(struct usbatm_data *usbatm, struct usb_device *usb_dev, struct usb_interface *intf, int altsetting, int claim) { int ifnum = intf->altsetting->desc.bInterfaceNumber; @@ -80,7 +80,7 @@ static int xusbatm_capture_intf (struct usbatm_data *usbatm, struct usb_device * return 0; } -static void xusbatm_release_intf (struct usb_device *usb_dev, struct usb_interface *intf, int claimed) +static void xusbatm_release_intf(struct usb_device *usb_dev, struct usb_interface *intf, int claimed) { if (claimed) { usb_set_intfdata(intf, NULL); @@ -147,7 +147,7 @@ static void xusbatm_unbind(struct usbatm_data *usbatm, usb_dbg(usbatm, "%s entered\n", __func__); - for(i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) { + for (i = 0; i < usb_dev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *cur_intf = usb_dev->actconfig->interface[i]; if (cur_intf && (usb_get_intfdata(cur_intf) == usbatm)) { diff --git a/drivers/usb/c67x00/c67x00-hcd.c b/drivers/usb/c67x00/c67x00-hcd.c index a22b887f4e9e..d3e1356d091e 100644 --- a/drivers/usb/c67x00/c67x00-hcd.c +++ b/drivers/usb/c67x00/c67x00-hcd.c @@ -264,7 +264,7 @@ static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg) if (unlikely(hcd->state == HC_STATE_HALT)) return; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) return; /* Handle Start of frame events */ @@ -282,7 +282,7 @@ static int c67x00_hcd_start(struct usb_hcd *hcd) { hcd->uses_new_polling = 1; hcd->state = HC_STATE_RUNNING; - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); return 0; } diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 84f9e52327f2..e325162859b0 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -135,7 +135,7 @@ MFG:HEWLETT-PACKARD;MDL:DESKJET 970C;CMD:MLC,PCL,PML;CLASS:PRINTER;DESCRIPTION:H * ->lock locks what interrupt accesses. */ struct usblp { - struct usb_device *dev; /* USB device */ + struct usb_device *dev; /* USB device */ struct mutex wmut; struct mutex mut; spinlock_t lock; /* locks rcomplete, wcomplete */ @@ -169,7 +169,8 @@ struct usblp { }; #ifdef DEBUG -static void usblp_dump(struct usblp *usblp) { +static void usblp_dump(struct usblp *usblp) +{ int p; dbg("usblp=0x%p", usblp); @@ -216,8 +217,8 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x03f0, 0x0304, USBLP_QUIRK_BIDIR }, /* HP DeskJet 810C/812C */ { 0x03f0, 0x0404, USBLP_QUIRK_BIDIR }, /* HP DeskJet 830C */ { 0x03f0, 0x0504, USBLP_QUIRK_BIDIR }, /* HP DeskJet 885C */ - { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ - { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ + { 0x03f0, 0x0604, USBLP_QUIRK_BIDIR }, /* HP DeskJet 840C */ + { 0x03f0, 0x0804, USBLP_QUIRK_BIDIR }, /* HP DeskJet 816C */ { 0x03f0, 0x1104, USBLP_QUIRK_BIDIR }, /* HP Deskjet 959C */ { 0x0409, 0xefbe, USBLP_QUIRK_BIDIR }, /* NEC Picty900 (HP OEM) */ { 0x0409, 0xbef4, USBLP_QUIRK_BIDIR }, /* NEC Picty760 (HP OEM) */ @@ -254,9 +255,8 @@ static int usblp_ctrl_msg(struct usblp *usblp, int request, int type, int dir, i /* High byte has the interface index. Low byte has the alternate setting. */ - if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) { - index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; - } + if ((request == USBLP_REQ_GET_ID) && (type == USB_TYPE_CLASS)) + index = (usblp->ifnum<<8)|usblp->protocol[usblp->current_protocol].alt_setting; retval = usb_control_msg(usblp->dev, dir ? usb_rcvctrlpipe(usblp->dev, 0) : usb_sndctrlpipe(usblp->dev, 0), @@ -372,7 +372,7 @@ static int usblp_check_status(struct usblp *usblp, int err) return newerr; } -static int handle_bidir (struct usblp *usblp) +static int handle_bidir(struct usblp *usblp) { if (usblp->bidir && usblp->used) { if (usblp_submit_read(usblp) < 0) @@ -395,14 +395,13 @@ static int usblp_open(struct inode *inode, struct file *file) if (minor < 0) return -ENODEV; - mutex_lock (&usblp_mutex); + mutex_lock(&usblp_mutex); retval = -ENODEV; intf = usb_find_interface(&usblp_driver, minor); - if (!intf) { + if (!intf) goto out; - } - usblp = usb_get_intfdata (intf); + usblp = usb_get_intfdata(intf); if (!usblp || !usblp->dev || !usblp->present) goto out; @@ -433,18 +432,18 @@ static int usblp_open(struct inode *inode, struct file *file) retval = -EIO; } out: - mutex_unlock (&usblp_mutex); + mutex_unlock(&usblp_mutex); return retval; } -static void usblp_cleanup (struct usblp *usblp) +static void usblp_cleanup(struct usblp *usblp) { printk(KERN_INFO "usblp%d: removed\n", usblp->minor); kfree(usblp->readbuf); - kfree (usblp->device_id_string); - kfree (usblp->statusbuf); - kfree (usblp); + kfree(usblp->device_id_string); + kfree(usblp->statusbuf); + kfree(usblp); } static void usblp_unlink_urbs(struct usblp *usblp) @@ -458,14 +457,14 @@ static int usblp_release(struct inode *inode, struct file *file) usblp->flags &= ~LP_ABORT; - mutex_lock (&usblp_mutex); + mutex_lock(&usblp_mutex); usblp->used = 0; if (usblp->present) { usblp_unlink_urbs(usblp); usb_autopm_put_interface(usblp->intf); - } else /* finish cleanup from disconnect */ - usblp_cleanup (usblp); - mutex_unlock (&usblp_mutex); + } else /* finish cleanup from disconnect */ + usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); return 0; } @@ -495,190 +494,190 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int twoints[2]; int retval = 0; - mutex_lock (&usblp->mut); + mutex_lock(&usblp->mut); if (!usblp->present) { retval = -ENODEV; goto done; } dbg("usblp_ioctl: cmd=0x%x (%c nr=%d len=%d dir=%d)", cmd, _IOC_TYPE(cmd), - _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd) ); + _IOC_NR(cmd), _IOC_SIZE(cmd), _IOC_DIR(cmd)); if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */ switch (_IOC_NR(cmd)) { - case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ - if (_IOC_DIR(cmd) != _IOC_READ) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */ + if (_IOC_DIR(cmd) != _IOC_READ) { + retval = -EINVAL; + goto done; + } - length = usblp_cache_device_id_string(usblp); - if (length < 0) { - retval = length; - goto done; - } - if (length > _IOC_SIZE(cmd)) - length = _IOC_SIZE(cmd); /* truncate */ - - if (copy_to_user((void __user *) arg, - usblp->device_id_string, - (unsigned long) length)) { - retval = -EFAULT; - goto done; - } + length = usblp_cache_device_id_string(usblp); + if (length < 0) { + retval = length; + goto done; + } + if (length > _IOC_SIZE(cmd)) + length = _IOC_SIZE(cmd); /* truncate */ + + if (copy_to_user((void __user *) arg, + usblp->device_id_string, + (unsigned long) length)) { + retval = -EFAULT; + goto done; + } - break; + break; - case IOCNR_GET_PROTOCOLS: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_PROTOCOLS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = usblp->current_protocol; - twoints[1] = 0; - for (i = USBLP_FIRST_PROTOCOL; - i <= USBLP_LAST_PROTOCOL; i++) { - if (usblp->protocol[i].alt_setting >= 0) - twoints[1] |= (1<<i); - } + twoints[0] = usblp->current_protocol; + twoints[1] = 0; + for (i = USBLP_FIRST_PROTOCOL; + i <= USBLP_LAST_PROTOCOL; i++) { + if (usblp->protocol[i].alt_setting >= 0) + twoints[1] |= (1<<i); + } - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - break; + break; - case IOCNR_SET_PROTOCOL: - if (_IOC_DIR(cmd) != _IOC_WRITE) { - retval = -EINVAL; - goto done; - } + case IOCNR_SET_PROTOCOL: + if (_IOC_DIR(cmd) != _IOC_WRITE) { + retval = -EINVAL; + goto done; + } #ifdef DEBUG - if (arg == -10) { - usblp_dump(usblp); - break; - } + if (arg == -10) { + usblp_dump(usblp); + break; + } #endif - usblp_unlink_urbs(usblp); - retval = usblp_set_protocol(usblp, arg); - if (retval < 0) { - usblp_set_protocol(usblp, - usblp->current_protocol); - } - break; + usblp_unlink_urbs(usblp); + retval = usblp_set_protocol(usblp, arg); + if (retval < 0) { + usblp_set_protocol(usblp, + usblp->current_protocol); + } + break; - case IOCNR_HP_SET_CHANNEL: - if (_IOC_DIR(cmd) != _IOC_WRITE || - le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || - usblp->quirks & USBLP_QUIRK_BIDIR) { - retval = -EINVAL; - goto done; - } + case IOCNR_HP_SET_CHANNEL: + if (_IOC_DIR(cmd) != _IOC_WRITE || + le16_to_cpu(usblp->dev->descriptor.idVendor) != 0x03F0 || + usblp->quirks & USBLP_QUIRK_BIDIR) { + retval = -EINVAL; + goto done; + } - err = usblp_hp_channel_change_request(usblp, - arg, &newChannel); - if (err < 0) { - dev_err(&usblp->dev->dev, - "usblp%d: error = %d setting " - "HP channel\n", - usblp->minor, err); - retval = -EIO; - goto done; - } + err = usblp_hp_channel_change_request(usblp, + arg, &newChannel); + if (err < 0) { + dev_err(&usblp->dev->dev, + "usblp%d: error = %d setting " + "HP channel\n", + usblp->minor, err); + retval = -EIO; + goto done; + } - dbg("usblp%d requested/got HP channel %ld/%d", - usblp->minor, arg, newChannel); - break; + dbg("usblp%d requested/got HP channel %ld/%d", + usblp->minor, arg, newChannel); + break; - case IOCNR_GET_BUS_ADDRESS: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_BUS_ADDRESS: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = usblp->dev->bus->busnum; - twoints[1] = usblp->dev->devnum; - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + twoints[0] = usblp->dev->bus->busnum; + twoints[1] = usblp->dev->devnum; + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - dbg("usblp%d is bus=%d, device=%d", - usblp->minor, twoints[0], twoints[1]); - break; + dbg("usblp%d is bus=%d, device=%d", + usblp->minor, twoints[0], twoints[1]); + break; - case IOCNR_GET_VID_PID: - if (_IOC_DIR(cmd) != _IOC_READ || - _IOC_SIZE(cmd) < sizeof(twoints)) { - retval = -EINVAL; - goto done; - } + case IOCNR_GET_VID_PID: + if (_IOC_DIR(cmd) != _IOC_READ || + _IOC_SIZE(cmd) < sizeof(twoints)) { + retval = -EINVAL; + goto done; + } - twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); - twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); - if (copy_to_user((void __user *)arg, - (unsigned char *)twoints, - sizeof(twoints))) { - retval = -EFAULT; - goto done; - } + twoints[0] = le16_to_cpu(usblp->dev->descriptor.idVendor); + twoints[1] = le16_to_cpu(usblp->dev->descriptor.idProduct); + if (copy_to_user((void __user *)arg, + (unsigned char *)twoints, + sizeof(twoints))) { + retval = -EFAULT; + goto done; + } - dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", - usblp->minor, twoints[0], twoints[1]); - break; + dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X", + usblp->minor, twoints[0], twoints[1]); + break; - case IOCNR_SOFT_RESET: - if (_IOC_DIR(cmd) != _IOC_NONE) { - retval = -EINVAL; - goto done; - } - retval = usblp_reset(usblp); - break; - default: - retval = -ENOTTY; + case IOCNR_SOFT_RESET: + if (_IOC_DIR(cmd) != _IOC_NONE) { + retval = -EINVAL; + goto done; + } + retval = usblp_reset(usblp); + break; + default: + retval = -ENOTTY; } else /* old-style ioctl value */ switch (cmd) { - case LPGETSTATUS: - if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { - if (printk_ratelimit()) - printk(KERN_ERR "usblp%d:" - "failed reading printer status (%d)\n", - usblp->minor, retval); - retval = -EIO; - goto done; - } - status = *usblp->statusbuf; - if (copy_to_user ((void __user *)arg, &status, sizeof(int))) - retval = -EFAULT; - break; + case LPGETSTATUS: + if ((retval = usblp_read_status(usblp, usblp->statusbuf))) { + if (printk_ratelimit()) + printk(KERN_ERR "usblp%d:" + "failed reading printer status (%d)\n", + usblp->minor, retval); + retval = -EIO; + goto done; + } + status = *usblp->statusbuf; + if (copy_to_user((void __user *)arg, &status, sizeof(int))) + retval = -EFAULT; + break; - case LPABORT: - if (arg) - usblp->flags |= LP_ABORT; - else - usblp->flags &= ~LP_ABORT; - break; + case LPABORT: + if (arg) + usblp->flags |= LP_ABORT; + else + usblp->flags &= ~LP_ABORT; + break; - default: - retval = -ENOTTY; + default: + retval = -ENOTTY; } done: - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); return retval; } @@ -840,7 +839,7 @@ static ssize_t usblp_read(struct file *file, char __user *buffer, size_t len, lo } done: - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); return count; } @@ -1023,7 +1022,7 @@ raise_urb: * while you are sending print data, and you don't try to query the * printer status every couple of milliseconds, you will probably be OK. */ -static unsigned int usblp_quirks (__u16 vendor, __u16 product) +static unsigned int usblp_quirks(__u16 vendor, __u16 product) { int i; @@ -1031,7 +1030,7 @@ static unsigned int usblp_quirks (__u16 vendor, __u16 product) if (vendor == quirk_printers[i].vendorId && product == quirk_printers[i].productId) return quirk_printers[i].quirks; - } + } return 0; } @@ -1061,7 +1060,7 @@ static struct usb_class_driver usblp_class = { static ssize_t usblp_show_ieee1284_id(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_interface *intf = to_usb_interface(dev); - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); if (usblp->device_id_string[0] == 0 && usblp->device_id_string[1] == 0) @@ -1075,7 +1074,7 @@ static DEVICE_ATTR(ieee1284_id, S_IRUGO, usblp_show_ieee1284_id, NULL); static int usblp_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct usb_device *dev = interface_to_usbdev (intf); + struct usb_device *dev = interface_to_usbdev(intf); struct usblp *usblp; int protocol; int retval; @@ -1089,7 +1088,7 @@ static int usblp_probe(struct usb_interface *intf, } usblp->dev = dev; mutex_init(&usblp->wmut); - mutex_init (&usblp->mut); + mutex_init(&usblp->mut); spin_lock_init(&usblp->lock); init_waitqueue_head(&usblp->rwait); init_waitqueue_head(&usblp->wwait); @@ -1153,7 +1152,7 @@ static int usblp_probe(struct usb_interface *intf, usblp_check_status(usblp, 0); #endif - usb_set_intfdata (intf, usblp); + usb_set_intfdata(intf, usblp); usblp->present = 1; @@ -1177,7 +1176,7 @@ static int usblp_probe(struct usb_interface *intf, return 0; abort_intfdata: - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); device_remove_file(&intf->dev, &dev_attr_ieee1284_id); abort: kfree(usblp->readbuf); @@ -1340,35 +1339,35 @@ static int usblp_cache_device_id_string(struct usblp *usblp) static void usblp_disconnect(struct usb_interface *intf) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); usb_deregister_dev(intf, &usblp_class); if (!usblp || !usblp->dev) { dev_err(&intf->dev, "bogus disconnect\n"); - BUG (); + BUG(); } device_remove_file(&intf->dev, &dev_attr_ieee1284_id); - mutex_lock (&usblp_mutex); - mutex_lock (&usblp->mut); + mutex_lock(&usblp_mutex); + mutex_lock(&usblp->mut); usblp->present = 0; wake_up(&usblp->wwait); wake_up(&usblp->rwait); - usb_set_intfdata (intf, NULL); + usb_set_intfdata(intf, NULL); usblp_unlink_urbs(usblp); - mutex_unlock (&usblp->mut); + mutex_unlock(&usblp->mut); if (!usblp->used) - usblp_cleanup (usblp); - mutex_unlock (&usblp_mutex); + usblp_cleanup(usblp); + mutex_unlock(&usblp_mutex); } static int usblp_suspend(struct usb_interface *intf, pm_message_t message) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); usblp_unlink_urbs(usblp); #if 0 /* XXX Do we want this? What if someone is reading, should we fail? */ @@ -1382,10 +1381,10 @@ static int usblp_suspend(struct usb_interface *intf, pm_message_t message) static int usblp_resume(struct usb_interface *intf) { - struct usblp *usblp = usb_get_intfdata (intf); + struct usblp *usblp = usb_get_intfdata(intf); int r; - r = handle_bidir (usblp); + r = handle_bidir(usblp); return r; } @@ -1401,7 +1400,7 @@ static const struct usb_device_id usblp_ids[] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, usblp_ids); +MODULE_DEVICE_TABLE(usb, usblp_ids); static struct usb_driver usblp_driver = { .name = "usblp", @@ -1426,8 +1425,8 @@ static void __exit usblp_exit(void) module_init(usblp_init); module_exit(usblp_exit); -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); module_param(proto_bias, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(proto_bias, "Favourite protocol number"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index c2f62a3993d2..f1aaff6202a5 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1668,13 +1668,10 @@ static int proc_ioctl(struct dev_state *ps, struct usbdevfs_ioctl *ctl) default: if (intf->dev.driver) driver = to_usb_driver(intf->dev.driver); - if (driver == NULL || driver->ioctl == NULL) { + if (driver == NULL || driver->unlocked_ioctl == NULL) { retval = -ENOTTY; } else { - /* keep API that guarantees BKL */ - lock_kernel(); - retval = driver->ioctl(intf, ctl->ioctl_code, buf); - unlock_kernel(); + retval = driver->unlocked_ioctl(intf, ctl->ioctl_code, buf); if (retval == -ENOIOCTLCMD) retval = -ENOTTY; } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index a6bd53ace035..d7a4401ef019 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1742,9 +1742,8 @@ static int usb_runtime_suspend(struct device *dev) } /* Prevent the parent from suspending immediately after */ - else if (udev->parent) { + else if (udev->parent) udev->parent->last_busy = jiffies; - } } /* Runtime suspend for a USB interface doesn't mean anything. */ @@ -1786,21 +1785,19 @@ static int usb_runtime_idle(struct device *dev) return 0; } -static struct dev_pm_ops usb_bus_pm_ops = { +static const struct dev_pm_ops usb_bus_pm_ops = { .runtime_suspend = usb_runtime_suspend, .runtime_resume = usb_runtime_resume, .runtime_idle = usb_runtime_idle, }; -#else - -#define usb_bus_pm_ops (*(struct dev_pm_ops *) NULL) - #endif /* CONFIG_USB_SUSPEND */ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, +#ifdef CONFIG_USB_SUSPEND .pm = &usb_bus_pm_ops, +#endif }; diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index 4f84a41ee7a8..3788e738e265 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -96,16 +96,21 @@ static ssize_t show_ep_interval(struct device *dev, switch (usb_endpoint_type(ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: - if (ep->udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ + if (ep->udev->speed == USB_SPEED_HIGH) + /* uframes per NAK */ interval = ep->desc->bInterval; break; + case USB_ENDPOINT_XFER_ISOC: interval = 1 << (ep->desc->bInterval - 1); break; + case USB_ENDPOINT_XFER_BULK: - if (ep->udev->speed == USB_SPEED_HIGH && !in) /* uframes per NAK */ + if (ep->udev->speed == USB_SPEED_HIGH && !in) + /* uframes per NAK */ interval = ep->desc->bInterval; break; + case USB_ENDPOINT_XFER_INT: if (ep->udev->speed == USB_SPEED_HIGH) interval = 1 << (ep->desc->bInterval - 1); diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index 9a34ccb0a1c0..69ecd3c92311 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -105,8 +105,10 @@ int usb_choose_configuration(struct usb_device *udev) /* When the first config's first interface is one of Microsoft's * pet nonstandard Ethernet-over-USB protocols, ignore it unless * this kernel has enabled the necessary host side driver. + * But: Don't ignore it if it's the only config. */ - if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) { + if (i == 0 && num_configs > 1 && desc && + (is_rndis(desc) || is_activesync(desc))) { #if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) continue; #else diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 1cf2d1e79a5c..c3f98543caaf 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -66,10 +66,7 @@ static void companion_common(struct pci_dev *pdev, struct usb_hcd *hcd, * vice versa. */ companion = NULL; - for (;;) { - companion = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, companion); - if (!companion) - break; + for_each_pci_dev(companion) { if (companion->bus != pdev->bus || PCI_SLOT(companion->devfn) != slot) continue; @@ -250,6 +247,9 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (retval != 0) goto err4; set_hs_companion(dev, hcd); + + if (pci_dev_run_wake(dev)) + pm_runtime_put_noidle(&dev->dev); return retval; err4: @@ -292,6 +292,17 @@ void usb_hcd_pci_remove(struct pci_dev *dev) if (!hcd) return; + if (pci_dev_run_wake(dev)) + pm_runtime_get_noresume(&dev->dev); + + /* Fake an interrupt request in order to give the driver a chance + * to test whether the controller hardware has been removed (e.g., + * cardbus physical eject). + */ + local_irq_disable(); + usb_hcd_irq(0, hcd); + local_irq_enable(); + usb_remove_hcd(hcd); if (hcd->driver->flags & HCD_MEMORY) { iounmap(hcd->regs); @@ -317,12 +328,34 @@ void usb_hcd_pci_shutdown(struct pci_dev *dev) if (!hcd) return; - if (hcd->driver->shutdown) + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && + hcd->driver->shutdown) hcd->driver->shutdown(hcd); } EXPORT_SYMBOL_GPL(usb_hcd_pci_shutdown); -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM_OPS + +#ifdef CONFIG_PPC_PMAC +static void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{ + /* Enanble or disable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(pci_dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, enable); + } +} + +#else + +static inline void powermac_set_asic(struct pci_dev *pci_dev, int enable) +{} + +#endif /* CONFIG_PPC_PMAC */ static int check_root_hub_suspended(struct device *dev) { @@ -337,7 +370,7 @@ static int check_root_hub_suspended(struct device *dev) return 0; } -static int hcd_pci_suspend(struct device *dev) +static int suspend_common(struct device *dev, bool do_wakeup) { struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); @@ -352,13 +385,21 @@ static int hcd_pci_suspend(struct device *dev) if (retval) return retval; - /* We might already be suspended (runtime PM -- not yet written) */ - if (pci_dev->current_state != PCI_D0) - return retval; - if (hcd->driver->pci_suspend) { - retval = hcd->driver->pci_suspend(hcd); + /* Optimization: Don't suspend if a root-hub wakeup is + * pending and it would cause the HCD to wake up anyway. + */ + if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) + return -EBUSY; + retval = hcd->driver->pci_suspend(hcd, do_wakeup); suspend_report_result(hcd->driver->pci_suspend, retval); + + /* Check again in case wakeup raced with pci_suspend */ + if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + if (hcd->driver->pci_resume) + hcd->driver->pci_resume(hcd, false); + retval = -EBUSY; + } if (retval) return retval; } @@ -374,6 +415,48 @@ static int hcd_pci_suspend(struct device *dev) return retval; } +static int resume_common(struct device *dev, int event) +{ + struct pci_dev *pci_dev = to_pci_dev(dev); + struct usb_hcd *hcd = pci_get_drvdata(pci_dev); + int retval; + + if (hcd->state != HC_STATE_SUSPENDED) { + dev_dbg(dev, "can't resume, not suspended!\n"); + return 0; + } + + retval = pci_enable_device(pci_dev); + if (retval < 0) { + dev_err(dev, "can't re-enable after resume, %d!\n", retval); + return retval; + } + + pci_set_master(pci_dev); + + clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + if (hcd->driver->pci_resume) { + if (event != PM_EVENT_AUTO_RESUME) + wait_for_companions(pci_dev, hcd); + + retval = hcd->driver->pci_resume(hcd, + event == PM_EVENT_RESTORE); + if (retval) { + dev_err(dev, "PCI post-resume error %d!\n", retval); + usb_hc_died(hcd); + } + } + return retval; +} + +#ifdef CONFIG_PM_SLEEP + +static int hcd_pci_suspend(struct device *dev) +{ + return suspend_common(dev, device_may_wakeup(dev)); +} + static int hcd_pci_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -408,16 +491,7 @@ static int hcd_pci_suspend_noirq(struct device *dev) return retval; } -#ifdef CONFIG_PPC_PMAC - /* Disable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(pci_dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, of_node, 0, 0); - } -#endif + powermac_set_asic(pci_dev, 0); return retval; } @@ -425,69 +499,63 @@ static int hcd_pci_resume_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(pci_dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif + powermac_set_asic(pci_dev, 1); /* Go back to D0 and disable remote wakeup */ pci_back_from_sleep(pci_dev); return 0; } -static int resume_common(struct device *dev, bool hibernated) +static int hcd_pci_resume(struct device *dev) { - struct pci_dev *pci_dev = to_pci_dev(dev); - struct usb_hcd *hcd = pci_get_drvdata(pci_dev); - int retval; + return resume_common(dev, PM_EVENT_RESUME); +} - if (hcd->state != HC_STATE_SUSPENDED) { - dev_dbg(dev, "can't resume, not suspended!\n"); - return 0; - } +static int hcd_pci_restore(struct device *dev) +{ + return resume_common(dev, PM_EVENT_RESTORE); +} - retval = pci_enable_device(pci_dev); - if (retval < 0) { - dev_err(dev, "can't re-enable after resume, %d!\n", retval); - return retval; - } +#else - pci_set_master(pci_dev); +#define hcd_pci_suspend NULL +#define hcd_pci_suspend_noirq NULL +#define hcd_pci_resume_noirq NULL +#define hcd_pci_resume NULL +#define hcd_pci_restore NULL - clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); +#endif /* CONFIG_PM_SLEEP */ - if (hcd->driver->pci_resume) { - /* This call should be made only during system resume, - * not during runtime resume. - */ - wait_for_companions(pci_dev, hcd); +#ifdef CONFIG_PM_RUNTIME - retval = hcd->driver->pci_resume(hcd, hibernated); - if (retval) { - dev_err(dev, "PCI post-resume error %d!\n", retval); - usb_hc_died(hcd); - } - } +static int hcd_pci_runtime_suspend(struct device *dev) +{ + int retval; + + retval = suspend_common(dev, true); + if (retval == 0) + powermac_set_asic(to_pci_dev(dev), 0); + dev_dbg(dev, "hcd_pci_runtime_suspend: %d\n", retval); return retval; } -static int hcd_pci_resume(struct device *dev) +static int hcd_pci_runtime_resume(struct device *dev) { - return resume_common(dev, false); -} + int retval; -static int hcd_pci_restore(struct device *dev) -{ - return resume_common(dev, true); + powermac_set_asic(to_pci_dev(dev), 1); + retval = resume_common(dev, PM_EVENT_AUTO_RESUME); + dev_dbg(dev, "hcd_pci_runtime_resume: %d\n", retval); + return retval; } +#else + +#define hcd_pci_runtime_suspend NULL +#define hcd_pci_runtime_resume NULL + +#endif /* CONFIG_PM_RUNTIME */ + const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend = hcd_pci_suspend, .suspend_noirq = hcd_pci_suspend_noirq, @@ -501,7 +569,9 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { .poweroff_noirq = hcd_pci_suspend_noirq, .restore_noirq = hcd_pci_resume_noirq, .restore = hcd_pci_restore, + .runtime_suspend = hcd_pci_runtime_suspend, + .runtime_resume = hcd_pci_runtime_resume, }; EXPORT_SYMBOL_GPL(usb_hcd_pci_pm_ops); -#endif /* CONFIG_PM_SLEEP */ +#endif /* CONFIG_PM_OPS */ diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 12742f152f43..5cca00a6d09d 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -667,7 +667,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) unsigned long flags; char buffer[6]; /* Any root hubs with > 31 ports? */ - if (unlikely(!hcd->rh_registered)) + if (unlikely(!hcd->rh_pollable)) return; if (!hcd->uses_new_polling && !hcd->status_urb) return; @@ -679,7 +679,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) spin_lock_irqsave(&hcd_root_hub_lock, flags); urb = hcd->status_urb; if (urb) { - hcd->poll_pending = 0; + clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); hcd->status_urb = NULL; urb->actual_length = length; memcpy(urb->transfer_buffer, buffer, length); @@ -690,7 +690,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) spin_lock(&hcd_root_hub_lock); } else { length = 0; - hcd->poll_pending = 1; + set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags); } spin_unlock_irqrestore(&hcd_root_hub_lock, flags); } @@ -699,7 +699,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) * exceed that limit if HZ is 100. The math is more clunky than * maybe expected, this is to make sure that all timers for USB devices * fire at the same time to give the CPU a break inbetween */ - if (hcd->uses_new_polling ? hcd->poll_rh : + if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) : (length == 0 && hcd->status_urb != NULL)) mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); } @@ -736,7 +736,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4)); /* If a status change has already occurred, report it ASAP */ - else if (hcd->poll_pending) + else if (HCD_POLL_PENDING(hcd)) mod_timer(&hcd->rh_timer, jiffies); retval = 0; done: @@ -1150,8 +1150,7 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, * finish unlinking the initial failed usb_set_address() * or device descriptor fetch. */ - if (!test_bit(HCD_FLAG_SAW_IRQ, &hcd->flags) && - !is_root_hub(urb->dev)) { + if (!HCD_SAW_IRQ(hcd) && !is_root_hub(urb->dev)) { dev_warn(hcd->self.controller, "Unlink after no-IRQ? " "Controller is probably using the wrong IRQ.\n"); set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); @@ -1219,6 +1218,11 @@ static int hcd_alloc_coherent(struct usb_bus *bus, { unsigned char *vaddr; + if (*vaddr_handle == NULL) { + WARN_ON_ONCE(1); + return -EFAULT; + } + vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr), mem_flags, dma_handle); if (!vaddr) @@ -1941,6 +1945,7 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); + clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); if (!hcd->driver->bus_resume) return -ENOENT; if (hcd->state == HC_STATE_RUNNING) @@ -1994,8 +1999,10 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) unsigned long flags; spin_lock_irqsave (&hcd_root_hub_lock, flags); - if (hcd->rh_registered) + if (hcd->rh_registered) { + set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags); queue_work(pm_wq, &hcd->wakeup_work); + } spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); @@ -2063,8 +2070,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) */ local_irq_save(flags); - if (unlikely(hcd->state == HC_STATE_HALT || - !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) { rc = IRQ_NONE; } else if (hcd->driver->irq(hcd) == IRQ_NONE) { rc = IRQ_NONE; @@ -2079,6 +2085,7 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) local_irq_restore(flags); return rc; } +EXPORT_SYMBOL_GPL(usb_hcd_irq); /*-------------------------------------------------------------------------*/ @@ -2098,7 +2105,7 @@ void usb_hc_died (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) { - hcd->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); /* make khubd clean up old urbs and devices */ usb_set_device_state (hcd->self.root_hub, @@ -2217,6 +2224,7 @@ int usb_add_hcd(struct usb_hcd *hcd, retval = -ENOMEM; goto err_allocate_root_hub; } + hcd->self.root_hub = rhdev; switch (hcd->driver->flags & HCD_MASK) { case HCD_USB11: @@ -2229,9 +2237,8 @@ int usb_add_hcd(struct usb_hcd *hcd, rhdev->speed = USB_SPEED_SUPER; break; default: - goto err_allocate_root_hub; + goto err_set_rh_speed; } - hcd->self.root_hub = rhdev; /* wakeup flag init defaults to "everything works" for root hubs, * but drivers can override it in reset() if needed, along with @@ -2246,6 +2253,7 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_err(hcd->self.controller, "can't setup\n"); goto err_hcd_driver_setup; } + hcd->rh_pollable = 1; /* NOTE: root hub and controller capabilities may not be the same */ if (device_can_wakeup(hcd->self.controller) @@ -2300,23 +2308,38 @@ int usb_add_hcd(struct usb_hcd *hcd, retval); goto error_create_attr_group; } - if (hcd->uses_new_polling && hcd->poll_rh) + if (hcd->uses_new_polling && HCD_POLL_RH(hcd)) usb_hcd_poll_rh_status(hcd); return retval; error_create_attr_group: + if (HC_IS_RUNNING(hcd->state)) + hcd->state = HC_STATE_QUIESCING; + spin_lock_irq(&hcd_root_hub_lock); + hcd->rh_registered = 0; + spin_unlock_irq(&hcd_root_hub_lock); + +#ifdef CONFIG_USB_SUSPEND + cancel_work_sync(&hcd->wakeup_work); +#endif mutex_lock(&usb_bus_list_lock); - usb_disconnect(&hcd->self.root_hub); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_list_lock); err_register_root_hub: + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); hcd->driver->stop(hcd); + hcd->state = HC_STATE_HALT; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); err_hcd_driver_start: if (hcd->irq >= 0) free_irq(irqnum, hcd); err_request_irq: err_hcd_driver_setup: - hcd->self.root_hub = NULL; - usb_put_dev(rhdev); +err_set_rh_speed: + usb_put_dev(hcd->self.root_hub); err_allocate_root_hub: usb_deregister_bus(&hcd->self); err_register_bus: @@ -2335,8 +2358,13 @@ EXPORT_SYMBOL_GPL(usb_add_hcd); */ void usb_remove_hcd(struct usb_hcd *hcd) { + struct usb_device *rhdev = hcd->self.root_hub; + dev_info(hcd->self.controller, "remove, state %x\n", hcd->state); + usb_get_dev(rhdev); + sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group); + if (HC_IS_RUNNING (hcd->state)) hcd->state = HC_STATE_QUIESCING; @@ -2349,19 +2377,30 @@ void usb_remove_hcd(struct usb_hcd *hcd) cancel_work_sync(&hcd->wakeup_work); #endif - sysfs_remove_group(&hcd->self.root_hub->dev.kobj, &usb_bus_attr_group); mutex_lock(&usb_bus_list_lock); - usb_disconnect(&hcd->self.root_hub); + usb_disconnect(&rhdev); /* Sets rhdev to NULL */ mutex_unlock(&usb_bus_list_lock); + /* Prevent any more root-hub status calls from the timer. + * The HCD might still restart the timer (if a port status change + * interrupt occurs), but usb_hcd_poll_rh_status() won't invoke + * the hub_status_data() callback. + */ + hcd->rh_pollable = 0; + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + del_timer_sync(&hcd->rh_timer); + hcd->driver->stop(hcd); hcd->state = HC_STATE_HALT; - hcd->poll_rh = 0; + /* In case the HCD restarted the timer, stop it again. */ + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); if (hcd->irq >= 0) free_irq(hcd->irq, hcd); + + usb_put_dev(hcd->self.root_hub); usb_deregister_bus(&hcd->self); hcd_buffer_destroy(hcd); } diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 70cccc75a362..84c1897188d2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -20,6 +20,7 @@ #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> +#include <linux/usb/quirks.h> #include <linux/kthread.h> #include <linux/mutex.h> #include <linux/freezer.h> @@ -1294,6 +1295,7 @@ descriptor_error: return -ENODEV; } +/* No BKL needed */ static int hub_ioctl(struct usb_interface *intf, unsigned int code, void *user_data) { @@ -1801,7 +1803,6 @@ int usb_new_device(struct usb_device *udev) pm_runtime_set_active(&udev->dev); pm_runtime_enable(&udev->dev); - usb_detect_quirks(udev); err = usb_enumerate_device(udev); /* Read descriptors */ if (err < 0) goto fail; @@ -2880,7 +2881,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, } retval = 0; - + /* notify HCD that we have a device connected and addressed */ + if (hcd->driver->update_device) + hcd->driver->update_device(hcd, udev); fail: if (retval) { hub_port_disable(hub, port1, 0); @@ -3111,6 +3114,10 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (status < 0) goto loop; + usb_detect_quirks(udev); + if (udev->quirks & USB_QUIRK_DELAY_INIT) + msleep(1000); + /* consecutive bus-powered hubs aren't reliable; they can * violate the voltage drop budget. if the new child has * a "powered" LED, users should notice we didn't enable it @@ -3463,7 +3470,7 @@ static struct usb_driver hub_driver = { .reset_resume = hub_reset_resume, .pre_reset = hub_pre_reset, .post_reset = hub_post_reset, - .ioctl = hub_ioctl, + .unlocked_ioctl = hub_ioctl, .id_table = hub_id_table, .supports_autosuspend = 1, }; diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 1a27618b67d6..095fa5366690 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -265,13 +265,9 @@ static int remount(struct super_block *sb, int *flags, char *data) return -EINVAL; } - lock_kernel(); - if (usbfs_mount && usbfs_mount->mnt_sb) update_sb(usbfs_mount->mnt_sb); - unlock_kernel(); - return 0; } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index db99c084df92..25719da45e33 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -38,6 +38,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech Harmony 700-series */ + { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7c0555548ac8..419e6b34e2fe 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -137,6 +137,16 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor) } EXPORT_SYMBOL_GPL(usb_anchor_urb); +/* Callers must hold anchor->lock */ +static void __usb_unanchor_urb(struct urb *urb, struct usb_anchor *anchor) +{ + urb->anchor = NULL; + list_del(&urb->anchor_list); + usb_put_urb(urb); + if (list_empty(&anchor->urb_list)) + wake_up(&anchor->wait); +} + /** * usb_unanchor_urb - unanchors an URB * @urb: pointer to the urb to anchor @@ -156,17 +166,14 @@ void usb_unanchor_urb(struct urb *urb) return; spin_lock_irqsave(&anchor->lock, flags); - if (unlikely(anchor != urb->anchor)) { - /* we've lost the race to another thread */ - spin_unlock_irqrestore(&anchor->lock, flags); - return; - } - urb->anchor = NULL; - list_del(&urb->anchor_list); + /* + * At this point, we could be competing with another thread which + * has the same intention. To protect the urb from being unanchored + * twice, only the winner of the race gets the job. + */ + if (likely(anchor == urb->anchor)) + __usb_unanchor_urb(urb, anchor); spin_unlock_irqrestore(&anchor->lock, flags); - usb_put_urb(urb); - if (list_empty(&anchor->urb_list)) - wake_up(&anchor->wait); } EXPORT_SYMBOL_GPL(usb_unanchor_urb); @@ -749,20 +756,11 @@ EXPORT_SYMBOL_GPL(usb_unpoison_anchored_urbs); void usb_unlink_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; - unsigned long flags; - spin_lock_irqsave(&anchor->lock, flags); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - /* this will unanchor the URB */ + while ((victim = usb_get_from_anchor(anchor)) != NULL) { usb_unlink_urb(victim); usb_put_urb(victim); - spin_lock_irqsave(&anchor->lock, flags); } - spin_unlock_irqrestore(&anchor->lock, flags); } EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs); @@ -799,12 +797,11 @@ struct urb *usb_get_from_anchor(struct usb_anchor *anchor) victim = list_entry(anchor->urb_list.next, struct urb, anchor_list); usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - usb_unanchor_urb(victim); + __usb_unanchor_urb(victim, anchor); } else { - spin_unlock_irqrestore(&anchor->lock, flags); victim = NULL; } + spin_unlock_irqrestore(&anchor->lock, flags); return victim; } @@ -826,12 +823,7 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) while (!list_empty(&anchor->urb_list)) { victim = list_entry(anchor->urb_list.prev, struct urb, anchor_list); - usb_get_urb(victim); - spin_unlock_irqrestore(&anchor->lock, flags); - /* this may free the URB */ - usb_unanchor_urb(victim); - usb_put_urb(victim); - spin_lock_irqsave(&anchor->lock, flags); + __usb_unanchor_urb(victim, anchor); } spin_unlock_irqrestore(&anchor->lock, flags); } diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 5ae14f6c1e7a..fdd4130fbb7d 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -317,10 +317,6 @@ static const struct dev_pm_ops usb_device_pm_ops = { .restore = usb_dev_restore, }; -#else - -#define usb_device_pm_ops (*(struct dev_pm_ops *) NULL) - #endif /* CONFIG_PM */ @@ -338,7 +334,9 @@ struct device_type usb_device_type = { .release = usb_release_dev, .uevent = usb_dev_uevent, .devnode = usb_devnode, +#ifdef CONFIG_PM .pm = &usb_device_pm_ops, +#endif }; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 591ae9fde199..cd27f9bde2c8 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -714,6 +714,7 @@ config USB_GADGETFS config USB_FUNCTIONFS tristate "Function Filesystem (EXPERIMENTAL)" depends on EXPERIMENTAL + select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) help The Function Filesystem (FunctioFS) lets one create USB composite functions in user space in the same way as GadgetFS @@ -722,31 +723,31 @@ config USB_FUNCTIONFS implemented in kernel space (for instance Ethernet, serial or mass storage) and other are implemented in user space. + If you say "y" or "m" here you will be able what kind of + configurations the gadget will provide. + Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_ffs". config USB_FUNCTIONFS_ETH - bool "Include CDC ECM (Ethernet) function" + bool "Include configuration with CDC ECM (Ethernet)" depends on USB_FUNCTIONFS && NET help - Include an CDC ECM (Ethernet) funcion in the CDC ECM (Funcion) - Filesystem. If you also say "y" to the RNDIS query below the - gadget will have two configurations. + Include a configuration with CDC ECM funcion (Ethernet) and the + Funcion Filesystem. config USB_FUNCTIONFS_RNDIS - bool "Include RNDIS (Ethernet) function" + bool "Include configuration with RNDIS (Ethernet)" depends on USB_FUNCTIONFS && NET help - Include an RNDIS (Ethernet) funcion in the Funcion Filesystem. - If you also say "y" to the CDC ECM query above the gadget will - have two configurations. + Include a configuration with RNDIS funcion (Ethernet) and the Filesystem. config USB_FUNCTIONFS_GENERIC bool "Include 'pure' configuration" - depends on USB_FUNCTIONFS && (USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) + depends on USB_FUNCTIONFS help - Include a configuration with FunctionFS and no Ethernet - configuration. + Include a configuration with the Function Filesystem alone with + no Ethernet interface. config USB_FILE_STORAGE tristate "File-backed Storage Gadget" @@ -863,6 +864,7 @@ config USB_G_NOKIA config USB_G_MULTI tristate "Multifunction Composite Gadget (EXPERIMENTAL)" depends on BLOCK && NET + select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS help The Multifunction Composite Gadget provides Ethernet (RNDIS and/or CDC Ethernet), mass storage and ACM serial link @@ -913,6 +915,34 @@ config USB_G_HID Say "y" to link the driver statically, or "m" to build a dynamically linked module called "g_hid". +config USB_G_DBGP + tristate "EHCI Debug Device Gadget" + help + This gadget emulates an EHCI Debug device. This is useful when you want + to interact with an EHCI Debug Port. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "g_dbgp". + +if USB_G_DBGP +choice + prompt "EHCI Debug Device mode" + default USB_G_DBGP_SERIAL + +config USB_G_DBGP_PRINTK + depends on USB_G_DBGP + bool "printk" + help + Directly printk() received data. No interaction. + +config USB_G_DBGP_SERIAL + depends on USB_G_DBGP + bool "serial" + help + Userland can interact using /dev/ttyGSxxx. +endchoice +endif + # put drivers that need isochronous transfer support (for audio # or video class gadget drivers), or specific hardware, here. config USB_G_WEBCAM diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 9bcde110feb1..27283df37d09 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -44,6 +44,7 @@ g_printer-objs := printer.o g_cdc-objs := cdc2.o g_multi-objs := multi.o g_hid-objs := hid.o +g_dbgp-objs := dbgp.o g_nokia-objs := nokia.o g_webcam-objs := webcam.o @@ -52,7 +53,6 @@ obj-$(CONFIG_USB_AUDIO) += g_audio.o obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_FUNCTIONFS) += g_ffs.o -obj-$(CONFIG_USB_ETH_FUNCTIONFS) += g_eth_ffs.o obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o @@ -60,6 +60,7 @@ obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o obj-$(CONFIG_USB_CDC_COMPOSITE) += g_cdc.o obj-$(CONFIG_USB_G_HID) += g_hid.o +obj-$(CONFIG_USB_G_DBGP) += g_dbgp.o obj-$(CONFIG_USB_G_MULTI) += g_multi.o obj-$(CONFIG_USB_G_NOKIA) += g_nokia.o obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c index a62af7b59094..b744ccd0f34d 100644 --- a/drivers/usb/gadget/audio.c +++ b/drivers/usb/gadget/audio.c @@ -89,7 +89,7 @@ static const struct usb_descriptor_header *otg_desc[] = { /*-------------------------------------------------------------------------*/ -static int __init audio_do_config(struct usb_configuration *c) +static int __ref audio_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -113,7 +113,7 @@ static struct usb_configuration audio_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init audio_bind(struct usb_composite_dev *cdev) +static int __ref audio_bind(struct usb_composite_dev *cdev) { int gcnum; int status; diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 928137d3dbdc..1f5ba2fd4c1f 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -129,7 +129,7 @@ static u8 hostaddr[ETH_ALEN]; /* * We _always_ have both CDC ECM and CDC ACM functions. */ -static int __init cdc_do_config(struct usb_configuration *c) +static int __ref cdc_do_config(struct usb_configuration *c) { int status; @@ -159,7 +159,7 @@ static struct usb_configuration cdc_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init cdc_bind(struct usb_composite_dev *cdev) +static int __ref cdc_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 391d169f8d07..e483f80822d2 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -673,20 +673,83 @@ static int get_string(struct usb_composite_dev *cdev, * string IDs. Drivers for functions, configurations, or gadgets will * then store that ID in the appropriate descriptors and string table. * - * All string identifier should be allocated using this routine, to - * ensure that for example different functions don't wrongly assign - * different meanings to the same identifier. + * All string identifier should be allocated using this, + * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure + * that for example different functions don't wrongly assign different + * meanings to the same identifier. */ int usb_string_id(struct usb_composite_dev *cdev) { if (cdev->next_string_id < 254) { - /* string id 0 is reserved */ + /* string id 0 is reserved by USB spec for list of + * supported languages */ + /* 255 reserved as well? -- mina86 */ cdev->next_string_id++; return cdev->next_string_id; } return -ENODEV; } +/** + * usb_string_ids() - allocate unused string IDs in batch + * @cdev: the device whose string descriptor IDs are being allocated + * @str: an array of usb_string objects to assign numbers to + * Context: single threaded during gadget setup + * + * @usb_string_ids() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then copy IDs from the string table to the appropriate descriptors + * and string table for other languages. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str) +{ + int next = cdev->next_string_id; + + for (; str->s; ++str) { + if (unlikely(next >= 254)) + return -ENODEV; + str->id = ++next; + } + + cdev->next_string_id = next; + + return 0; +} + +/** + * usb_string_ids_n() - allocate unused string IDs in batch + * @cdev: the device whose string descriptor IDs are being allocated + * @n: number of string IDs to allocate + * Context: single threaded during gadget setup + * + * Returns the first requested ID. This ID and next @n-1 IDs are now + * valid IDs. At least providind that @n is non zore because if it + * is, returns last requested ID which is now very useful information. + * + * @usb_string_ids_n() is called from bind() callbacks to allocate + * string IDs. Drivers for functions, configurations, or gadgets will + * then store that ID in the appropriate descriptors and string table. + * + * All string identifier should be allocated using this, + * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for + * example different functions don't wrongly assign different meanings + * to the same identifier. + */ +int usb_string_ids_n(struct usb_composite_dev *c, unsigned n) +{ + unsigned next = c->next_string_id; + if (unlikely(n > 254 || (unsigned)next + n > 254)) + return -ENODEV; + c->next_string_id += n; + return next + 1; +} + + /*-------------------------------------------------------------------------*/ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req) @@ -893,6 +956,8 @@ static void composite_disconnect(struct usb_gadget *gadget) spin_lock_irqsave(&cdev->lock, flags); if (cdev->config) reset_config(cdev); + if (composite->disconnect) + composite->disconnect(cdev); spin_unlock_irqrestore(&cdev->lock, flags); } diff --git a/drivers/usb/gadget/dbgp.c b/drivers/usb/gadget/dbgp.c new file mode 100644 index 000000000000..0ed50a2c0a36 --- /dev/null +++ b/drivers/usb/gadget/dbgp.c @@ -0,0 +1,434 @@ +/* + * dbgp.c -- EHCI Debug Port device gadget + * + * Copyright (C) 2010 Stephane Duverger + * + * Released under the GPLv2. + * + */ + +/* verbose messages */ +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +/* See comments in "zero.c" */ +#include "epautoconf.c" + +#ifdef CONFIG_USB_G_DBGP_SERIAL +#include "u_serial.c" +#endif + +#define DRIVER_VENDOR_ID 0x0525 /* NetChip */ +#define DRIVER_PRODUCT_ID 0xc0de /* undefined */ + +#define USB_DEBUG_MAX_PACKET_SIZE 8 +#define DBGP_REQ_EP0_LEN 128 +#define DBGP_REQ_LEN 512 + +static struct dbgp { + struct usb_gadget *gadget; + struct usb_request *req; + struct usb_ep *i_ep; + struct usb_ep *o_ep; +#ifdef CONFIG_USB_G_DBGP_SERIAL + struct gserial *serial; +#endif +} dbgp; + +static struct usb_device_descriptor device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = __constant_cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID), + .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID), + .bNumConfigurations = 1, +}; + +static struct usb_debug_descriptor dbg_desc = { + .bLength = sizeof dbg_desc, + .bDescriptorType = USB_DT_DEBUG, +}; + +static struct usb_endpoint_descriptor i_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_IN, +}; + +static struct usb_endpoint_descriptor o_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_OUT, +}; + +#ifdef CONFIG_USB_G_DBGP_PRINTK +static int dbgp_consume(char *buf, unsigned len) +{ + char c; + + if (!len) + return 0; + + c = buf[len-1]; + if (c != 0) + buf[len-1] = 0; + + printk(KERN_NOTICE "%s%c", buf, c); + return 0; +} + +static void __disable_ep(struct usb_ep *ep) +{ + if (ep && ep->driver_data == dbgp.gadget) { + usb_ep_disable(ep); + ep->driver_data = NULL; + } +} + +static void dbgp_disable_ep(void) +{ + __disable_ep(dbgp.i_ep); + __disable_ep(dbgp.o_ep); +} + +static void dbgp_complete(struct usb_ep *ep, struct usb_request *req) +{ + int stp; + int err = 0; + int status = req->status; + + if (ep == dbgp.i_ep) { + stp = 1; + goto fail; + } + + if (status != 0) { + stp = 2; + goto release_req; + } + + dbgp_consume(req->buf, req->actual); + + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto release_req; + } + + return; + +release_req: + kfree(req->buf); + usb_ep_free_request(dbgp.o_ep, req); + dbgp_disable_ep(); +fail: + dev_dbg(&dbgp.gadget->dev, + "complete: failure (%d:%d) ==> %d\n", stp, err, status); +} + +static int dbgp_enable_ep_req(struct usb_ep *ep) +{ + int err, stp; + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_KERNEL); + if (!req) { + err = -ENOMEM; + stp = 1; + goto fail_1; + } + + req->buf = kmalloc(DBGP_REQ_LEN, GFP_KERNEL); + if (!req->buf) { + err = -ENOMEM; + stp = 2; + goto fail_2; + } + + req->complete = dbgp_complete; + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + kfree(req->buf); +fail_2: + usb_ep_free_request(dbgp.o_ep, req); +fail_1: + dev_dbg(&dbgp.gadget->dev, + "enable ep req: failure (%d:%d)\n", stp, err); + return err; +} + +static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc) +{ + int err = usb_ep_enable(ep, desc); + ep->driver_data = dbgp.gadget; + return err; +} + +static int dbgp_enable_ep(void) +{ + int err, stp; + + err = __enable_ep(dbgp.i_ep, &i_desc); + if (err < 0) { + stp = 1; + goto fail_1; + } + + err = __enable_ep(dbgp.o_ep, &o_desc); + if (err < 0) { + stp = 2; + goto fail_2; + } + + err = dbgp_enable_ep_req(dbgp.o_ep); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + __disable_ep(dbgp.o_ep); +fail_2: + __disable_ep(dbgp.i_ep); +fail_1: + dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err); + return err; +} +#endif + +static void dbgp_disconnect(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_PRINTK + dbgp_disable_ep(); +#else + gserial_disconnect(dbgp.serial); +#endif +} + +static void dbgp_unbind(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_SERIAL + kfree(dbgp.serial); +#endif + if (dbgp.req) { + kfree(dbgp.req->buf); + usb_ep_free_request(gadget->ep0, dbgp.req); + } + + gadget->ep0->driver_data = NULL; +} + +static int __init dbgp_configure_endpoints(struct usb_gadget *gadget) +{ + int stp; + + usb_ep_autoconfig_reset(gadget); + + dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc); + if (!dbgp.i_ep) { + stp = 1; + goto fail_1; + } + + dbgp.i_ep->driver_data = gadget; + i_desc.wMaxPacketSize = + __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc); + if (!dbgp.o_ep) { + dbgp.i_ep->driver_data = NULL; + stp = 2; + goto fail_2; + } + + dbgp.o_ep->driver_data = gadget; + o_desc.wMaxPacketSize = + __constant_cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress & 0x7f; + dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress & 0x7f; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial->in = dbgp.i_ep; + dbgp.serial->out = dbgp.o_ep; + + dbgp.serial->in_desc = &i_desc; + dbgp.serial->out_desc = &o_desc; + + if (gserial_setup(gadget, 1) < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + dbgp.o_ep->driver_data = NULL; +#else + return 0; +#endif +fail_2: + dbgp.i_ep->driver_data = NULL; +fail_1: + dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp); + return -ENODEV; +} + +static int __init dbgp_bind(struct usb_gadget *gadget) +{ + int err, stp; + + dbgp.gadget = gadget; + + dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); + if (!dbgp.req) { + err = -ENOMEM; + stp = 1; + goto fail; + } + + dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL); + if (!dbgp.req->buf) { + err = -ENOMEM; + stp = 2; + goto fail; + } + + dbgp.req->length = DBGP_REQ_EP0_LEN; + gadget->ep0->driver_data = gadget; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL); + if (!dbgp.serial) { + stp = 3; + err = -ENOMEM; + goto fail; + } +#endif + err = dbgp_configure_endpoints(gadget); + if (err < 0) { + stp = 4; + goto fail; + } + + dev_dbg(&dbgp.gadget->dev, "bind: success\n"); + return 0; + +fail: + dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err); + dbgp_unbind(gadget); + return err; +} + +static void dbgp_setup_complete(struct usb_ep *ep, + struct usb_request *req) +{ + dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n", + req->status, req->actual, req->length); +} + +static int dbgp_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + struct usb_request *req = dbgp.req; + u8 request = ctrl->bRequest; + u16 value = le16_to_cpu(ctrl->wValue); + u16 length = le16_to_cpu(ctrl->wLength); + int err = 0; + void *data; + u16 len; + + gadget->ep0->driver_data = gadget; + + if (request == USB_REQ_GET_DESCRIPTOR) { + switch (value>>8) { + case USB_DT_DEVICE: + dev_dbg(&dbgp.gadget->dev, "setup: desc device\n"); + len = sizeof device_desc; + data = &device_desc; + break; + case USB_DT_DEBUG: + dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n"); + len = sizeof dbg_desc; + data = &dbg_desc; + break; + default: + goto fail; + } + } else if (request == USB_REQ_SET_FEATURE && + value == USB_DEVICE_DEBUG_MODE) { + len = 0; + data = NULL; + dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n"); +#ifdef CONFIG_USB_G_DBGP_PRINTK + err = dbgp_enable_ep(); +#else + err = gserial_connect(dbgp.serial, 0); +#endif + if (err < 0) + goto fail; + } else + goto fail; + + if (len >= 0) { + req->length = min(length, len); + req->zero = len < req->length; + if (data && req->length) + memcpy(req->buf, data, req->length); + + req->complete = dbgp_setup_complete; + return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + } + +fail: + dev_dbg(&dbgp.gadget->dev, + "setup: failure req %x v %x\n", request, value); + return err; +} + +static struct usb_gadget_driver dbgp_driver = { + .function = "dbgp", + .speed = USB_SPEED_HIGH, + .bind = dbgp_bind, + .unbind = dbgp_unbind, + .setup = dbgp_setup, + .disconnect = dbgp_disconnect, + .driver = { + .owner = THIS_MODULE, + .name = "dbgp" + }, +}; + +static int __init dbgp_init(void) +{ + return usb_gadget_register_driver(&dbgp_driver); +} + +static void __exit dbgp_exit(void) +{ + usb_gadget_unregister_driver(&dbgp_driver); +#ifdef CONFIG_USB_G_DBGP_SERIAL + gserial_cleanup(); +#endif +} + +MODULE_AUTHOR("Stephane Duverger"); +MODULE_LICENSE("GPL"); +module_init(dbgp_init); +module_exit(dbgp_exit); diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 4f9e578cde9d..dc6546248ed9 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1542,7 +1542,7 @@ static int dummy_hub_status (struct usb_hcd *hcd, char *buf) dum = hcd_to_dummy (hcd); spin_lock_irqsave (&dum->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) goto done; if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) { @@ -1588,7 +1588,7 @@ static int dummy_hub_control ( int retval = 0; unsigned long flags; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) return -ETIMEDOUT; dum = hcd_to_dummy (hcd); @@ -1739,7 +1739,7 @@ static int dummy_bus_resume (struct usb_hcd *hcd) dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__); spin_lock_irq (&dum->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { rc = -ESHUTDOWN; } else { dum->rh_state = DUMMY_RH_RUNNING; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 400f80372d93..114fa024c22c 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -237,7 +237,7 @@ static u8 hostaddr[ETH_ALEN]; * the first one present. That's to make Microsoft's drivers happy, * and to follow DOCSIS 1.0 (cable modem standard). */ -static int __init rndis_do_config(struct usb_configuration *c) +static int __ref rndis_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -270,7 +270,7 @@ MODULE_PARM_DESC(use_eem, "use CDC EEM mode"); /* * We _always_ have an ECM, CDC Subset, or EEM configuration. */ -static int __init eth_do_config(struct usb_configuration *c) +static int __ref eth_do_config(struct usb_configuration *c) { /* FIXME alloc iConfiguration string, set it in c->strings */ @@ -297,7 +297,7 @@ static struct usb_configuration eth_config_driver = { /*-------------------------------------------------------------------------*/ -static int __init eth_bind(struct usb_composite_dev *cdev) +static int __ref eth_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2aaa0f75c6cf..e4f595055208 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -714,9 +714,7 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) struct ffs_function *func = ffs->func; ret = func ? ffs_func_revmap_intf(func, value) : -ENODEV; } else if (gadget->ops->ioctl) { - lock_kernel(); ret = gadget->ops->ioctl(gadget, code, value); - unlock_kernel(); } else { ret = -ENOTTY; } @@ -1377,7 +1375,8 @@ static void ffs_data_reset(struct ffs_data *ffs) static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) { - unsigned i, count; + struct usb_gadget_strings **lang; + int first_id; ENTER(); @@ -1385,7 +1384,9 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) || test_and_set_bit(FFS_FL_BOUND, &ffs->flags))) return -EBADFD; - ffs_data_get(ffs); + first_id = usb_string_ids_n(cdev, ffs->strings_count); + if (unlikely(first_id < 0)) + return first_id; ffs->ep0req = usb_ep_alloc_request(cdev->gadget->ep0, GFP_KERNEL); if (unlikely(!ffs->ep0req)) @@ -1393,25 +1394,16 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev) ffs->ep0req->complete = ffs_ep0_complete; ffs->ep0req->context = ffs; - /* Get strings identifiers */ - for (count = ffs->strings_count, i = 0; i < count; ++i) { - struct usb_gadget_strings **lang; - - int id = usb_string_id(cdev); - if (unlikely(id < 0)) { - usb_ep_free_request(cdev->gadget->ep0, ffs->ep0req); - ffs->ep0req = NULL; - return id; - } - - lang = ffs->stringtabs; - do { - (*lang)->strings[i].id = id; - ++lang; - } while (*lang); + lang = ffs->stringtabs; + for (lang = ffs->stringtabs; *lang; ++lang) { + struct usb_string *str = (*lang)->strings; + int id = first_id; + for (; str->s; ++id, ++str) + str->id = id; } ffs->gadget = cdev->gadget; + ffs_data_get(ffs); return 0; } @@ -1480,9 +1472,9 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count) } -static int functionfs_add(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct ffs_data *ffs) +static int functionfs_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct ffs_data *ffs) { struct ffs_function *func; int ret; diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 1e00ff9866af..53e120208e99 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -142,7 +142,7 @@ static struct usb_descriptor_header *hidg_fs_descriptors[] = { static ssize_t f_hidg_read(struct file *file, char __user *buffer, size_t count, loff_t *ptr) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; char *tmp_buff = NULL; unsigned long flags; @@ -200,7 +200,7 @@ static void f_hidg_req_complete(struct usb_ep *ep, struct usb_request *req) static ssize_t f_hidg_write(struct file *file, const char __user *buffer, size_t count, loff_t *offp) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; ssize_t status = -ENOMEM; if (!access_ok(VERIFY_READ, buffer, count)) @@ -257,7 +257,7 @@ static ssize_t f_hidg_write(struct file *file, const char __user *buffer, static unsigned int f_hidg_poll(struct file *file, poll_table *wait) { - struct f_hidg *hidg = (struct f_hidg *)file->private_data; + struct f_hidg *hidg = file->private_data; unsigned int ret = 0; poll_wait(file, &hidg->read_queue, wait); diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index e91d1b16d9be..43225879c3cd 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -324,7 +324,7 @@ static void loopback_disable(struct usb_function *f) /*-------------------------------------------------------------------------*/ -static int __init loopback_bind_config(struct usb_configuration *c) +static int __ref loopback_bind_config(struct usb_configuration *c) { struct f_loopback *loop; int status; @@ -346,7 +346,7 @@ static int __init loopback_bind_config(struct usb_configuration *c) return status; } -static struct usb_configuration loopback_driver = { +static struct usb_configuration loopback_driver = { .label = "loopback", .strings = loopback_strings, .bind = loopback_bind_config, diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 4ce899c9b165..32cce029f65c 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -316,6 +316,27 @@ static const char fsg_string_interface[] = "Mass Storage"; /*-------------------------------------------------------------------------*/ struct fsg_dev; +struct fsg_common; + +/* FSF callback functions */ +struct fsg_operations { + /* Callback function to call when thread exits. If no + * callback is set or it returns value lower then zero MSF + * will force eject all LUNs it operates on (including those + * marked as non-removable or with prevent_medium_removal flag + * set). */ + int (*thread_exits)(struct fsg_common *common); + + /* Called prior to ejection. Negative return means error, + * zero means to continue with ejection, positive means not to + * eject. */ + int (*pre_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); + /* Called after ejection. Negative return means error, zero + * or positive is just a success. */ + int (*post_eject)(struct fsg_common *common, + struct fsg_lun *lun, int num); +}; /* Data shared by all the FSG instances. */ @@ -333,7 +354,6 @@ struct fsg_common { struct usb_ep *ep0; /* Copy of gadget->ep0 */ struct usb_request *ep0req; /* Copy of cdev->req */ unsigned int ep0_req_tag; - const char *ep0req_name; struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; @@ -369,8 +389,8 @@ struct fsg_common { struct completion thread_notifier; struct task_struct *thread_task; - /* Callback function to call when thread exits. */ - int (*thread_exits)(struct fsg_common *common); + /* Callback functions. */ + const struct fsg_operations *ops; /* Gadget's private data. */ void *private_data; @@ -394,12 +414,8 @@ struct fsg_config { const char *lun_name_format; const char *thread_name; - /* Callback function to call when thread exits. If no - * callback is set or it returns value lower then zero MSF - * will force eject all LUNs it operates on (including those - * marked as non-removable or with prevent_medium_removal flag - * set). */ - int (*thread_exits)(struct fsg_common *common); + /* Callback functions. */ + const struct fsg_operations *ops; /* Gadget's private data. */ void *private_data; @@ -435,6 +451,7 @@ static inline int __fsg_is_set(struct fsg_common *common, if (common->fsg) return 1; ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); + WARN_ON(1); return 0; } @@ -623,8 +640,6 @@ static int fsg_setup(struct usb_function *f, /* Respond with data/status */ req->length = min((u16)1, w_length); - fsg->common->ep0req_name = - ctrl->bRequestType & USB_DIR_IN ? "ep0-in" : "ep0-out"; return ep0_queue(fsg->common); } @@ -1395,43 +1410,55 @@ static int do_start_stop(struct fsg_common *common) } else if (!curlun->removable) { curlun->sense_data = SS_INVALID_COMMAND; return -EINVAL; - } - - loej = common->cmnd[4] & 0x02; - start = common->cmnd[4] & 0x01; - - /* eject code from file_storage.c:do_start_stop() */ - - if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ - (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ + } else if ((common->cmnd[1] & ~0x01) != 0 || /* Mask away Immed */ + (common->cmnd[4] & ~0x03) != 0) { /* Mask LoEj, Start */ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; return -EINVAL; } - if (!start) { - /* Are we allowed to unload the media? */ - if (curlun->prevent_medium_removal) { - LDBG(curlun, "unload attempt prevented\n"); - curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; - return -EINVAL; - } - if (loej) { /* Simulate an unload/eject */ - up_read(&common->filesem); - down_write(&common->filesem); - fsg_lun_close(curlun); - up_write(&common->filesem); - down_read(&common->filesem); - } - } else { + loej = common->cmnd[4] & 0x02; + start = common->cmnd[4] & 0x01; - /* Our emulation doesn't support mounting; the medium is - * available for use as soon as it is loaded. */ + /* Our emulation doesn't support mounting; the medium is + * available for use as soon as it is loaded. */ + if (start) { if (!fsg_lun_is_open(curlun)) { curlun->sense_data = SS_MEDIUM_NOT_PRESENT; return -EINVAL; } + return 0; } - return 0; + + /* Are we allowed to unload the media? */ + if (curlun->prevent_medium_removal) { + LDBG(curlun, "unload attempt prevented\n"); + curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; + return -EINVAL; + } + + if (!loej) + return 0; + + /* Simulate an unload/eject */ + if (common->ops && common->ops->pre_eject) { + int r = common->ops->pre_eject(common, curlun, + curlun - common->luns); + if (unlikely(r < 0)) + return r; + else if (r) + return 0; + } + + up_read(&common->filesem); + down_write(&common->filesem); + fsg_lun_close(curlun); + up_write(&common->filesem); + down_read(&common->filesem); + + return common->ops && common->ops->post_eject + ? min(0, common->ops->post_eject(common, curlun, + curlun - common->luns)) + : 0; } @@ -2610,7 +2637,8 @@ static int fsg_main_thread(void *common_) common->thread_task = NULL; spin_unlock_irq(&common->lock); - if (!common->thread_exits || common->thread_exits(common) < 0) { + if (!common->ops || !common->ops->thread_exits + || common->ops->thread_exits(common) < 0) { struct fsg_lun *curlun = common->luns; unsigned i = common->nluns; @@ -2686,6 +2714,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common, common->free_storage_on_release = 0; } + common->ops = cfg->ops; common->private_data = cfg->private_data; common->gadget = gadget; @@ -2807,7 +2836,6 @@ buffhds_first_it: /* Tell the thread to start working */ - common->thread_exits = cfg->thread_exits; common->thread_task = kthread_create(fsg_main_thread, common, OR(cfg->thread_name, "file-storage")); @@ -2990,9 +3018,9 @@ static struct usb_gadget_strings *fsg_strings_array[] = { NULL, }; -static int fsg_add(struct usb_composite_dev *cdev, - struct usb_configuration *c, - struct fsg_common *common) +static int fsg_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) { struct fsg_dev *fsg; int rc; @@ -3024,6 +3052,13 @@ static int fsg_add(struct usb_composite_dev *cdev, return rc; } +static inline int __deprecated __maybe_unused +fsg_add(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) +{ + return fsg_bind_config(cdev, c, common); +} /************************* Module parameters *************************/ @@ -3096,8 +3131,8 @@ fsg_config_from_params(struct fsg_config *cfg, cfg->product_name = 0; cfg->release = 0xffff; - cfg->thread_exits = 0; - cfg->private_data = 0; + cfg->ops = NULL; + cfg->private_data = NULL; /* Finalise */ cfg->can_stall = params->stall; diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 6d3cc443d914..685d768f336e 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -404,7 +404,7 @@ static void sourcesink_disable(struct usb_function *f) /*-------------------------------------------------------------------------*/ -static int __init sourcesink_bind_config(struct usb_configuration *c) +static int __ref sourcesink_bind_config(struct usb_configuration *c) { struct f_sourcesink *ss; int status; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b49d86e3e45b..a857b7ac238c 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -56,7 +56,7 @@ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by * the optional "protocol" module parameter. In addition, the default - * Vendor ID, Product ID, and release number can be overridden. + * Vendor ID, Product ID, release number and serial number can be overridden. * * There is support for multiple logical units (LUNs), each of which has * its own backing file. The number of LUNs can be set using the optional @@ -93,6 +93,8 @@ * removable Default false, boolean for removable media * luns=N Default N = number of filenames, number of * LUNs to support + * nofua=b[,b...] Default false, booleans for ignore FUA flag + * in SCSI WRITE(10,12) commands * stall Default determined according to the type of * USB device controller (usually true), * boolean to permit the driver to halt @@ -106,17 +108,18 @@ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID * release=0xRRRR Override the USB release number (bcdDevice) + * serial=HHHH... Override serial number (string of hex chars) * buflen=N Default N=16384, buffer size used (will be * rounded down to a multiple of * PAGE_CACHE_SIZE) * * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "ro", - * "removable", "luns", "stall", and "cdrom" options are available; default - * values are used for everything else. + * "removable", "luns", "nofua", "stall", and "cdrom" options are available; + * default values are used for everything else. * * The pathnames of the backing files and the ro settings are available in - * the attribute files "file" and "ro" in the lun<n> subdirectory of the - * gadget's sysfs directory. If the "removable" option is set, writing to + * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of + * the gadget's sysfs directory. If the "removable" option is set, writing to * these files will simulate ejecting/loading the medium (writing an empty * line means eject) and adjusting a write-enable tab. Changes to the ro * setting are not allowed when the medium is loaded or if CD-ROM emulation @@ -270,6 +273,8 @@ #define DRIVER_DESC "File-backed Storage Gadget" #define DRIVER_NAME "g_file_storage" +/* DRIVER_VERSION must be at least 6 characters long, as it is used + * to generate a fallback serial number. */ #define DRIVER_VERSION "20 November 2008" static char fsg_string_manufacturer[64]; @@ -301,8 +306,10 @@ MODULE_LICENSE("Dual BSD/GPL"); static struct { char *file[FSG_MAX_LUNS]; int ro[FSG_MAX_LUNS]; + int nofua[FSG_MAX_LUNS]; unsigned int num_filenames; unsigned int num_ros; + unsigned int num_nofuas; unsigned int nluns; int removable; @@ -314,6 +321,7 @@ static struct { unsigned short vendor; unsigned short product; unsigned short release; + char *serial; unsigned int buflen; int transport_type; @@ -341,6 +349,10 @@ MODULE_PARM_DESC(file, "names of backing files or devices"); module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); MODULE_PARM_DESC(ro, "true to force read-only"); +module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, + S_IRUGO); +MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); + module_param_named(luns, mod_data.nluns, uint, S_IRUGO); MODULE_PARM_DESC(luns, "number of LUNs"); @@ -353,6 +365,8 @@ MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); +module_param_named(serial, mod_data.serial, charp, S_IRUGO); +MODULE_PARM_DESC(serial, "USB serial number"); /* In the non-TEST version, only the module parameters listed above * are available. */ @@ -1272,7 +1286,8 @@ static int do_write(struct fsg_dev *fsg) curlun->sense_data = SS_INVALID_FIELD_IN_CDB; return -EINVAL; } - if (fsg->cmnd[1] & 0x08) { // FUA + /* FUA */ + if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { spin_lock(&curlun->filp->f_lock); curlun->filp->f_flags |= O_DSYNC; spin_unlock(&curlun->filp->f_lock); @@ -3126,6 +3141,7 @@ static int fsg_main_thread(void *fsg_) /* The write permissions and store_xxx pointers are set in fsg_bind() */ static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); +static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); @@ -3197,6 +3213,7 @@ static int __init check_parameters(struct fsg_dev *fsg) { int prot; int gcnum; + int i; /* Store the default values */ mod_data.transport_type = USB_PR_BULK; @@ -3272,13 +3289,65 @@ static int __init check_parameters(struct fsg_dev *fsg) ERROR(fsg, "invalid buflen\n"); return -ETOOSMALL; } + #endif /* CONFIG_USB_FILE_STORAGE_TEST */ + /* Serial string handling. + * On a real device, the serial string would be loaded + * from permanent storage. */ + if (mod_data.serial) { + const char *ch; + unsigned len = 0; + + /* Sanity check : + * The CB[I] specification limits the serial string to + * 12 uppercase hexadecimal characters. + * BBB need at least 12 uppercase hexadecimal characters, + * with a maximum of 126. */ + for (ch = mod_data.serial; *ch; ++ch) { + ++len; + if ((*ch < '0' || *ch > '9') && + (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ + WARNING(fsg, + "Invalid serial string character: %c; " + "Failing back to default\n", + *ch); + goto fill_serial; + } + } + if (len > 126 || + (mod_data.transport_type == USB_PR_BULK && len < 12) || + (mod_data.transport_type != USB_PR_BULK && len > 12)) { + WARNING(fsg, + "Invalid serial string length; " + "Failing back to default\n"); + goto fill_serial; + } + fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; + } else { + WARNING(fsg, + "Userspace failed to provide serial number; " + "Failing back to default\n"); +fill_serial: + /* Serial number not specified or invalid, make our own. + * We just encode it from the driver version string, + * 12 characters to comply with both CB[I] and BBB spec. + * Warning : Two devices running the same kernel will have + * the same fallback serial number. */ + for (i = 0; i < 12; i += 2) { + unsigned char c = DRIVER_VERSION[i / 2]; + + if (!c) + break; + sprintf(&fsg_string_serial[i], "%02X", c); + } + } + return 0; } -static int __init fsg_bind(struct usb_gadget *gadget) +static int __ref fsg_bind(struct usb_gadget *gadget) { struct fsg_dev *fsg = the_fsg; int rc; @@ -3305,6 +3374,10 @@ static int __init fsg_bind(struct usb_gadget *gadget) } } + /* Only for removable media? */ + dev_attr_nofua.attr.mode = 0644; + dev_attr_nofua.store = fsg_store_nofua; + /* Find out how many LUNs there should be */ i = mod_data.nluns; if (i == 0) @@ -3330,6 +3403,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) curlun->ro = mod_data.cdrom || mod_data.ro[i]; curlun->initially_ro = curlun->ro; curlun->removable = mod_data.removable; + curlun->nofua = mod_data.nofua[i]; curlun->dev.release = lun_release; curlun->dev.parent = &gadget->dev; curlun->dev.driver = &fsg_driver.driver; @@ -3344,6 +3418,8 @@ static int __init fsg_bind(struct usb_gadget *gadget) if ((rc = device_create_file(&curlun->dev, &dev_attr_ro)) != 0 || (rc = device_create_file(&curlun->dev, + &dev_attr_nofua)) != 0 || + (rc = device_create_file(&curlun->dev, &dev_attr_file)) != 0) { device_unregister(&curlun->dev); goto out; @@ -3447,16 +3523,6 @@ static int __init fsg_bind(struct usb_gadget *gadget) init_utsname()->sysname, init_utsname()->release, gadget->name); - /* On a real device, serial[] would be loaded from permanent - * storage. We just encode it from the driver version string. */ - for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) { - unsigned char c = DRIVER_VERSION[i / 2]; - - if (!c) - break; - sprintf(&fsg_string_serial[i], "%02X", c); - } - fsg->thread_task = kthread_create(fsg_main_thread, fsg, "file-storage-gadget"); if (IS_ERR(fsg->thread_task)) { @@ -3478,8 +3544,8 @@ static int __init fsg_bind(struct usb_gadget *gadget) if (IS_ERR(p)) p = NULL; } - LINFO(curlun, "ro=%d, file: %s\n", - curlun->ro, (p ? p : "(error)")); + LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", + curlun->ro, curlun->nofua, (p ? p : "(error)")); } } kfree(pathbuf); diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c index d1af253a9105..a9474f8d5325 100644 --- a/drivers/usb/gadget/g_ffs.c +++ b/drivers/usb/gadget/g_ffs.c @@ -32,12 +32,13 @@ # include "u_ether.c" static u8 gfs_hostaddr[ETH_ALEN]; -#else -# if !defined CONFIG_USB_FUNCTIONFS_GENERIC -# define CONFIG_USB_FUNCTIONFS_GENERIC +# ifdef CONFIG_USB_FUNCTIONFS_ETH +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]); # endif +#else # define gether_cleanup() do { } while (0) # define gether_setup(gadget, hostaddr) ((int)0) +# define gfs_hostaddr NULL #endif #include "f_fs.c" @@ -107,15 +108,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = { enum { GFS_STRING_MANUFACTURER_IDX, GFS_STRING_PRODUCT_IDX, -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS - GFS_STRING_RNDIS_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_FUNCTIONFS_ETH - GFS_STRING_ECM_CONFIG_IDX, -#endif -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC - GFS_STRING_GENERIC_CONFIG_IDX, -#endif + GFS_STRING_FIRST_CONFIG_IDX, }; static char gfs_manufacturer[50]; @@ -126,13 +119,13 @@ static struct usb_string gfs_strings[] = { [GFS_STRING_MANUFACTURER_IDX].s = gfs_manufacturer, [GFS_STRING_PRODUCT_IDX].s = gfs_driver_desc, #ifdef CONFIG_USB_FUNCTIONFS_RNDIS - [GFS_STRING_RNDIS_CONFIG_IDX].s = "FunctionFS + RNDIS", + { .s = "FunctionFS + RNDIS" }, #endif #ifdef CONFIG_USB_FUNCTIONFS_ETH - [GFS_STRING_ECM_CONFIG_IDX].s = "FunctionFS + ECM", + { .s = "FunctionFS + ECM" }, #endif #ifdef CONFIG_USB_FUNCTIONFS_GENERIC - [GFS_STRING_GENERIC_CONFIG_IDX].s = "FunctionFS", + { .s = "FunctionFS" }, #endif { } /* end of list */ }; @@ -146,59 +139,33 @@ static struct usb_gadget_strings *gfs_dev_strings[] = { }; + +struct gfs_configuration { + struct usb_configuration c; + int (*eth)(struct usb_configuration *c, u8 *ethaddr); +} gfs_configurations[] = { #ifdef CONFIG_USB_FUNCTIONFS_RNDIS -static int gfs_do_rndis_config(struct usb_configuration *c); - -static struct usb_configuration gfs_rndis_config_driver = { - .label = "FunctionFS + RNDIS", - .bind = gfs_do_rndis_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_rndis_config(cdev) \ - usb_add_config(cdev, &gfs_rndis_config_driver) -#else -# define gfs_add_rndis_config(cdev) 0 + { + .eth = rndis_bind_config, + }, #endif - #ifdef CONFIG_USB_FUNCTIONFS_ETH -static int gfs_do_ecm_config(struct usb_configuration *c); - -static struct usb_configuration gfs_ecm_config_driver = { - .label = "FunctionFS + ECM", - .bind = gfs_do_ecm_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_ecm_config(cdev) \ - usb_add_config(cdev, &gfs_ecm_config_driver) -#else -# define gfs_add_ecm_config(cdev) 0 + { + .eth = eth_bind_config, + }, #endif - #ifdef CONFIG_USB_FUNCTIONFS_GENERIC -static int gfs_do_generic_config(struct usb_configuration *c); - -static struct usb_configuration gfs_generic_config_driver = { - .label = "FunctionFS", - .bind = gfs_do_generic_config, - .bConfigurationValue = 2, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; -# define gfs_add_generic_config(cdev) \ - usb_add_config(cdev, &gfs_generic_config_driver) -#else -# define gfs_add_generic_config(cdev) 0 + { + }, #endif +}; static int gfs_bind(struct usb_composite_dev *cdev); static int gfs_unbind(struct usb_composite_dev *cdev); +static int gfs_do_config(struct usb_configuration *c); static struct usb_composite_driver gfs_driver = { .name = gfs_short_name, @@ -267,7 +234,7 @@ static int functionfs_check_dev_callback(const char *dev_name) static int gfs_bind(struct usb_composite_dev *cdev) { - int ret; + int ret, i; ENTER(); @@ -284,57 +251,32 @@ static int gfs_bind(struct usb_composite_dev *cdev) snprintf(gfs_manufacturer, sizeof gfs_manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, cdev->gadget->name); - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_MANUFACTURER_IDX].id = ret; - gfs_dev_desc.iManufacturer = ret; - - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_PRODUCT_IDX].id = ret; - gfs_dev_desc.iProduct = ret; - -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_RNDIS_CONFIG_IDX].id = ret; - gfs_rndis_config_driver.iConfiguration = ret; -#endif -#ifdef CONFIG_USB_FUNCTIONFS_ETH - ret = usb_string_id(cdev); + ret = usb_string_ids_tab(cdev, gfs_strings); if (unlikely(ret < 0)) goto error; - gfs_strings[GFS_STRING_ECM_CONFIG_IDX].id = ret; - gfs_ecm_config_driver.iConfiguration = ret; -#endif -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC - ret = usb_string_id(cdev); - if (unlikely(ret < 0)) - goto error; - gfs_strings[GFS_STRING_GENERIC_CONFIG_IDX].id = ret; - gfs_generic_config_driver.iConfiguration = ret; -#endif + gfs_dev_desc.iManufacturer = gfs_strings[GFS_STRING_MANUFACTURER_IDX].id; + gfs_dev_desc.iProduct = gfs_strings[GFS_STRING_PRODUCT_IDX].id; ret = functionfs_bind(gfs_ffs_data, cdev); if (unlikely(ret < 0)) goto error; - ret = gfs_add_rndis_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + for (i = 0; i < ARRAY_SIZE(gfs_configurations); ++i) { + struct gfs_configuration *c = gfs_configurations + i; - ret = gfs_add_ecm_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + ret = GFS_STRING_FIRST_CONFIG_IDX + i; + c->c.label = gfs_strings[ret].s; + c->c.iConfiguration = gfs_strings[ret].id; + c->c.bind = gfs_do_config; + c->c.bConfigurationValue = 1 + i; + c->c.bmAttributes = USB_CONFIG_ATT_SELFPOWER; - ret = gfs_add_generic_config(cdev); - if (unlikely(ret < 0)) - goto error_unbind; + ret = usb_add_config(cdev, &c->c); + if (unlikely(ret < 0)) + goto error_unbind; + } return 0; @@ -368,10 +310,10 @@ static int gfs_unbind(struct usb_composite_dev *cdev) } -static int __gfs_do_config(struct usb_configuration *c, - int (*eth)(struct usb_configuration *c, u8 *ethaddr), - u8 *ethaddr) +static int gfs_do_config(struct usb_configuration *c) { + struct gfs_configuration *gc = + container_of(c, struct gfs_configuration, c); int ret; if (WARN_ON(!gfs_ffs_data)) @@ -382,13 +324,13 @@ static int __gfs_do_config(struct usb_configuration *c, c->bmAttributes |= USB_CONFIG_ATT_WAKEUP; } - if (eth) { - ret = eth(c, ethaddr); + if (gc->eth) { + ret = gc->eth(c, gfs_hostaddr); if (unlikely(ret < 0)) return ret; } - ret = functionfs_add(c->cdev, c, gfs_ffs_data); + ret = functionfs_bind_config(c->cdev, c, gfs_ffs_data); if (unlikely(ret < 0)) return ret; @@ -406,32 +348,12 @@ static int __gfs_do_config(struct usb_configuration *c, return 0; } -#ifdef CONFIG_USB_FUNCTIONFS_RNDIS -static int gfs_do_rndis_config(struct usb_configuration *c) -{ - ENTER(); - - return __gfs_do_config(c, rndis_bind_config, gfs_hostaddr); -} -#endif #ifdef CONFIG_USB_FUNCTIONFS_ETH -static int gfs_do_ecm_config(struct usb_configuration *c) -{ - ENTER(); - - return __gfs_do_config(c, - can_support_ecm(c->cdev->gadget) - ? ecm_bind_config : geth_bind_config, - gfs_hostaddr); -} -#endif - -#ifdef CONFIG_USB_FUNCTIONFS_GENERIC -static int gfs_do_generic_config(struct usb_configuration *c) +static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]) { - ENTER(); - - return __gfs_do_config(c, NULL, NULL); + return can_support_ecm(c->cdev->gadget) + ? ecm_bind_config(c, ethaddr) + : geth_bind_config(c, ethaddr); } #endif diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index b7bf88019b06..1b413a5cc3f6 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -1157,7 +1157,7 @@ fail: /* * Creates an output endpoint, and initializes output ports. */ -static int __init gmidi_bind(struct usb_gadget *gadget) +static int __ref gmidi_bind(struct usb_gadget *gadget) { struct gmidi_device *dev; struct usb_ep *in_ep, *out_ep; diff --git a/drivers/usb/gadget/hid.c b/drivers/usb/gadget/hid.c index 775722686ed8..735495bf8411 100644 --- a/drivers/usb/gadget/hid.c +++ b/drivers/usb/gadget/hid.c @@ -127,7 +127,7 @@ static struct usb_gadget_strings *dev_strings[] = { /****************************** Configurations ******************************/ -static int __init do_config(struct usb_configuration *c) +static int __ref do_config(struct usb_configuration *c) { struct hidg_func_node *e; int func = 0, status = 0; @@ -156,7 +156,7 @@ static struct usb_configuration config_driver = { /****************************** Gadget Bind ******************************/ -static int __init hid_bind(struct usb_composite_dev *cdev) +static int __ref hid_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; struct list_head *tmp; diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index de8a83803505..fc35406fc80c 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1299,11 +1299,9 @@ static long dev_ioctl (struct file *fd, unsigned code, unsigned long value) struct usb_gadget *gadget = dev->gadget; long ret = -ENOTTY; - if (gadget->ops->ioctl) { - lock_kernel(); + if (gadget->ops->ioctl) ret = gadget->ops->ioctl (gadget, code, value); - unlock_kernel(); - } + return ret; } @@ -1867,13 +1865,9 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) buf += 4; length -= 4; - kbuf = kmalloc (length, GFP_KERNEL); - if (!kbuf) - return -ENOMEM; - if (copy_from_user (kbuf, buf, length)) { - kfree (kbuf); - return -EFAULT; - } + kbuf = memdup_user(buf, length); + if (IS_ERR(kbuf)) + return PTR_ERR(kbuf); spin_lock_irq (&dev->lock); value = -EINVAL; diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index a3913519fd58..c2d2a201f84b 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -842,9 +842,9 @@ static int langwell_ep_queue(struct usb_ep *_ep, struct usb_request *_req, VDBG(dev, "req->mapped = 0\n"); } - DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08x\n", - _ep->name, - _req, _req->length, _req->buf, _req->dma); + DBG(dev, "%s queue req %p, len %u, buf %p, dma 0x%08llx\n", + _ep->name, + _req, _req->length, _req->buf, (unsigned long long)_req->dma); _req->status = -EINPROGRESS; _req->actual = 0; diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c index 705cc1f76327..585f2559484d 100644 --- a/drivers/usb/gadget/mass_storage.c +++ b/drivers/usb/gadget/mass_storage.c @@ -141,9 +141,14 @@ static int msg_thread_exits(struct fsg_common *common) return 0; } -static int __init msg_do_config(struct usb_configuration *c) +static int __ref msg_do_config(struct usb_configuration *c) { - struct fsg_common *common; + static const struct fsg_operations ops = { + .thread_exits = msg_thread_exits, + }; + static struct fsg_common common; + + struct fsg_common *retp; struct fsg_config config; int ret; @@ -153,13 +158,14 @@ static int __init msg_do_config(struct usb_configuration *c) } fsg_config_from_params(&config, &mod_data); - config.thread_exits = msg_thread_exits; - common = fsg_common_init(0, c->cdev, &config); - if (IS_ERR(common)) - return PTR_ERR(common); + config.ops = &ops; + + retp = fsg_common_init(&common, c->cdev, &config); + if (IS_ERR(retp)) + return PTR_ERR(retp); - ret = fsg_add(c->cdev, c, common); - fsg_common_put(common); + ret = fsg_bind_config(c->cdev, c, &common); + fsg_common_put(&common); return ret; } @@ -176,7 +182,7 @@ static struct usb_configuration msg_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init msg_bind(struct usb_composite_dev *cdev) +static int __ref msg_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status; diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index a930d7fd7e7a..795d76232167 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -24,6 +24,7 @@ #include <linux/kernel.h> #include <linux/utsname.h> +#include <linux/module.h> #if defined USB_ETH_RNDIS @@ -35,14 +36,13 @@ #define DRIVER_DESC "Multifunction Composite Gadget" -#define DRIVER_VERSION "2009/07/21" -/*-------------------------------------------------------------------------*/ +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("Michal Nazarewicz"); +MODULE_LICENSE("GPL"); -#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */ -#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */ -/*-------------------------------------------------------------------------*/ +/***************************** All the files... *****************************/ /* * kbuild is not very cooperative with respect to linking separately @@ -57,6 +57,8 @@ #include "config.c" #include "epautoconf.c" +#include "f_mass_storage.c" + #include "u_serial.c" #include "f_acm.c" @@ -68,13 +70,24 @@ #endif #include "u_ether.c" -#undef DBG /* u_ether.c has broken idea about macros */ -#undef VDBG /* so clean up after it */ -#undef ERROR -#undef INFO -#include "f_mass_storage.c" -/*-------------------------------------------------------------------------*/ + +/***************************** Device Descriptor ****************************/ + +#define MULTI_VENDOR_NUM 0x0525 /* XXX NetChip */ +#define MULTI_PRODUCT_NUM 0xa4ab /* XXX */ + + +enum { + __MULTI_NO_CONFIG, +#ifdef CONFIG_USB_G_MULTI_RNDIS + MULTI_RNDIS_CONFIG_NUM, +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_CDC_CONFIG_NUM, +#endif +}; + static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, @@ -82,80 +95,82 @@ static struct usb_device_descriptor device_desc = { .bcdUSB = cpu_to_le16(0x0200), - /* .bDeviceClass = USB_CLASS_COMM, */ - /* .bDeviceSubClass = 0, */ - /* .bDeviceProtocol = 0, */ - .bDeviceClass = 0xEF, + .bDeviceClass = USB_CLASS_MISC /* 0xEF */, .bDeviceSubClass = 2, .bDeviceProtocol = 1, - /* .bMaxPacketSize0 = f(hardware) */ /* Vendor and product id can be overridden by module parameters. */ .idVendor = cpu_to_le16(MULTI_VENDOR_NUM), .idProduct = cpu_to_le16(MULTI_PRODUCT_NUM), - /* .bcdDevice = f(hardware) */ - /* .iManufacturer = DYNAMIC */ - /* .iProduct = DYNAMIC */ - /* NO SERIAL NUMBER */ - .bNumConfigurations = 1, }; -static struct usb_otg_descriptor otg_descriptor = { - .bLength = sizeof otg_descriptor, - .bDescriptorType = USB_DT_OTG, - - /* REVISIT SRP-only hardware is possible, although - * it would not be called "OTG" ... - */ - .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, -}; static const struct usb_descriptor_header *otg_desc[] = { - (struct usb_descriptor_header *) &otg_descriptor, + (struct usb_descriptor_header *) &(struct usb_otg_descriptor){ + .bLength = sizeof(struct usb_otg_descriptor), + .bDescriptorType = USB_DT_OTG, + + /* + * REVISIT SRP-only hardware is possible, although + * it would not be called "OTG" ... + */ + .bmAttributes = USB_OTG_SRP | USB_OTG_HNP, + }, NULL, }; -/* string IDs are assigned dynamically */ - -#define STRING_MANUFACTURER_IDX 0 -#define STRING_PRODUCT_IDX 1 +enum { + MULTI_STRING_MANUFACTURER_IDX, + MULTI_STRING_PRODUCT_IDX, +#ifdef CONFIG_USB_G_MULTI_RNDIS + MULTI_STRING_RNDIS_CONFIG_IDX, +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + MULTI_STRING_CDC_CONFIG_IDX, +#endif +}; static char manufacturer[50]; static struct usb_string strings_dev[] = { - [STRING_MANUFACTURER_IDX].s = manufacturer, - [STRING_PRODUCT_IDX].s = DRIVER_DESC, + [MULTI_STRING_MANUFACTURER_IDX].s = manufacturer, + [MULTI_STRING_PRODUCT_IDX].s = DRIVER_DESC, +#ifdef CONFIG_USB_G_MULTI_RNDIS + [MULTI_STRING_RNDIS_CONFIG_IDX].s = "Multifunction with RNDIS", +#endif +#ifdef CONFIG_USB_G_MULTI_CDC + [MULTI_STRING_CDC_CONFIG_IDX].s = "Multifunction with CDC ECM", +#endif { } /* end of list */ }; -static struct usb_gadget_strings stringtab_dev = { - .language = 0x0409, /* en-us */ - .strings = strings_dev, -}; - static struct usb_gadget_strings *dev_strings[] = { - &stringtab_dev, + &(struct usb_gadget_strings){ + .language = 0x0409, /* en-us */ + .strings = strings_dev, + }, NULL, }; -static u8 hostaddr[ETH_ALEN]; /****************************** Configurations ******************************/ -static struct fsg_module_parameters mod_data = { - .stall = 1 -}; -FSG_MODULE_PARAMETERS(/* no prefix */, mod_data); +static struct fsg_module_parameters fsg_mod_data = { .stall = 1 }; +FSG_MODULE_PARAMETERS(/* no prefix */, fsg_mod_data); + +static struct fsg_common fsg_common; + +static u8 hostaddr[ETH_ALEN]; -static struct fsg_common *fsg_common; +/********** RNDIS **********/ #ifdef USB_ETH_RNDIS -static int __init rndis_do_config(struct usb_configuration *c) +static __ref int rndis_do_config(struct usb_configuration *c) { int ret; @@ -172,26 +187,42 @@ static int __init rndis_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = fsg_add(c->cdev, c, fsg_common); + ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) return ret; return 0; } -static struct usb_configuration rndis_config_driver = { - .label = "Multifunction Composite (RNDIS + MS + ACM)", - .bind = rndis_do_config, - .bConfigurationValue = 2, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; +static int rndis_config_register(struct usb_composite_dev *cdev) +{ + static struct usb_configuration config = { + .bind = rndis_do_config, + .bConfigurationValue = MULTI_RNDIS_CONFIG_NUM, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + }; + + config.label = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].s; + config.iConfiguration = strings_dev[MULTI_STRING_RNDIS_CONFIG_IDX].id; + + return usb_add_config(cdev, &config); +} + +#else + +static int rndis_config_register(struct usb_composite_dev *cdev) +{ + return 0; +} #endif + +/********** CDC ECM **********/ + #ifdef CONFIG_USB_G_MULTI_CDC -static int __init cdc_do_config(struct usb_configuration *c) +static __ref int cdc_do_config(struct usb_configuration *c) { int ret; @@ -208,20 +239,33 @@ static int __init cdc_do_config(struct usb_configuration *c) if (ret < 0) return ret; - ret = fsg_add(c->cdev, c, fsg_common); + ret = fsg_bind_config(c->cdev, c, &fsg_common); if (ret < 0) return ret; return 0; } -static struct usb_configuration cdc_config_driver = { - .label = "Multifunction Composite (CDC + MS + ACM)", - .bind = cdc_do_config, - .bConfigurationValue = 1, - /* .iConfiguration = DYNAMIC */ - .bmAttributes = USB_CONFIG_ATT_SELFPOWER, -}; +static int cdc_config_register(struct usb_composite_dev *cdev) +{ + static struct usb_configuration config = { + .bind = cdc_do_config, + .bConfigurationValue = MULTI_CDC_CONFIG_NUM, + .bmAttributes = USB_CONFIG_ATT_SELFPOWER, + }; + + config.label = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].s; + config.iConfiguration = strings_dev[MULTI_STRING_CDC_CONFIG_IDX].id; + + return usb_add_config(cdev, &config); +} + +#else + +static int cdc_config_register(struct usb_composite_dev *cdev) +{ + return 0; +} #endif @@ -230,7 +274,7 @@ static struct usb_configuration cdc_config_driver = { /****************************** Gadget Bind ******************************/ -static int __init multi_bind(struct usb_composite_dev *cdev) +static int __ref multi_bind(struct usb_composite_dev *cdev) { struct usb_gadget *gadget = cdev->gadget; int status, gcnum; @@ -252,67 +296,56 @@ static int __init multi_bind(struct usb_composite_dev *cdev) goto fail0; /* set up mass storage function */ - fsg_common = fsg_common_from_params(0, cdev, &mod_data); - if (IS_ERR(fsg_common)) { - status = PTR_ERR(fsg_common); - goto fail1; + { + void *retp; + retp = fsg_common_from_params(&fsg_common, cdev, &fsg_mod_data); + if (IS_ERR(retp)) { + status = PTR_ERR(retp); + goto fail1; + } } - + /* set bcdDevice */ gcnum = usb_gadget_controller_number(gadget); - if (gcnum >= 0) + if (gcnum >= 0) { device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum); - else { - /* We assume that can_support_ecm() tells the truth; - * but if the controller isn't recognized at all then - * that assumption is a bit more likely to be wrong. - */ - WARNING(cdev, "controller '%s' not recognized\n", - gadget->name); + } else { + WARNING(cdev, "controller '%s' not recognized\n", gadget->name); device_desc.bcdDevice = cpu_to_le16(0x0300 | 0x0099); } - - /* Allocate string descriptor numbers ... note that string - * contents can be overridden by the composite_dev glue. - */ - - /* device descriptor strings: manufacturer, product */ + /* allocate string descriptor numbers */ snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); - status = usb_string_id(cdev); - if (status < 0) - goto fail2; - strings_dev[STRING_MANUFACTURER_IDX].id = status; - device_desc.iManufacturer = status; - status = usb_string_id(cdev); - if (status < 0) + status = usb_string_ids_tab(cdev, strings_dev); + if (unlikely(status < 0)) goto fail2; - strings_dev[STRING_PRODUCT_IDX].id = status; - device_desc.iProduct = status; -#ifdef USB_ETH_RNDIS - /* register our first configuration */ - status = usb_add_config(cdev, &rndis_config_driver); - if (status < 0) + device_desc.iManufacturer = + strings_dev[MULTI_STRING_MANUFACTURER_IDX].id; + device_desc.iProduct = + strings_dev[MULTI_STRING_PRODUCT_IDX].id; + + /* register configurations */ + status = rndis_config_register(cdev); + if (unlikely(status < 0)) goto fail2; -#endif -#ifdef CONFIG_USB_G_MULTI_CDC - /* register our second configuration */ - status = usb_add_config(cdev, &cdc_config_driver); - if (status < 0) + status = cdc_config_register(cdev); + if (unlikely(status < 0)) goto fail2; -#endif - dev_info(&gadget->dev, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); - fsg_common_put(fsg_common); + /* we're done */ + dev_info(&gadget->dev, DRIVER_DESC "\n"); + fsg_common_put(&fsg_common); return 0; + + /* error recovery */ fail2: - fsg_common_put(fsg_common); + fsg_common_put(&fsg_common); fail1: gserial_cleanup(); fail0: @@ -339,18 +372,15 @@ static struct usb_composite_driver multi_driver = { .unbind = __exit_p(multi_unbind), }; -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Michal Nazarewicz"); -MODULE_LICENSE("GPL"); -static int __init g_multi_init(void) +static int __init multi_init(void) { return usb_composite_register(&multi_driver); } -module_init(g_multi_init); +module_init(multi_init); -static void __exit g_multi_cleanup(void) +static void __exit multi_exit(void) { usb_composite_unregister(&multi_driver); } -module_exit(g_multi_cleanup); +module_exit(multi_exit); diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 4c3ac5c42237..cf241c371a71 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -25,7 +25,7 @@ #include <linux/ioport.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> @@ -70,6 +70,7 @@ #define DRIVER_DESC "Printer Gadget" #define DRIVER_VERSION "2007 OCT 06" +static DEFINE_MUTEX(printer_mutex); static const char shortname [] = "printer"; static const char driver_desc [] = DRIVER_DESC; @@ -476,7 +477,7 @@ printer_open(struct inode *inode, struct file *fd) unsigned long flags; int ret = -EBUSY; - lock_kernel(); + mutex_lock(&printer_mutex); dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev); spin_lock_irqsave(&dev->lock, flags); @@ -492,7 +493,7 @@ printer_open(struct inode *inode, struct file *fd) spin_unlock_irqrestore(&dev->lock, flags); DBG(dev, "printer_open returned %x\n", ret); - unlock_kernel(); + mutex_unlock(&printer_mutex); return ret; } @@ -1346,7 +1347,7 @@ printer_unbind(struct usb_gadget *gadget) set_gadget_data(gadget, NULL); } -static int __init +static int __ref printer_bind(struct usb_gadget *gadget) { struct printer_dev *dev; diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 26193eceb323..521ebed0118d 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -12,6 +12,8 @@ * published by the Free Software Foundation. */ +#define DEBUG + #include <linux/kernel.h> #include <linux/module.h> #include <linux/spinlock.h> @@ -23,6 +25,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/clk.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -33,6 +36,7 @@ #include <plat/regs-usb-hsotg.h> #include <mach/regs-sys.h> #include <plat/udc-hs.h> +#include <plat/cpu.h> #define DMA_ADDR_INVALID (~((dma_addr_t)0)) @@ -91,7 +95,9 @@ struct s3c_hsotg_req; * For periodic IN endpoints, we have fifo_size and fifo_load to try * and keep track of the amount of data in the periodic FIFO for each * of these as we don't have a status register that tells us how much - * is in each of them. + * is in each of them. (note, this may actually be useless information + * as in shared-fifo mode periodic in acts like a single-frame packet + * buffer than a fifo) */ struct s3c_hsotg_ep { struct usb_ep ep; @@ -128,6 +134,7 @@ struct s3c_hsotg_ep { * @regs: The memory area mapped for accessing registers. * @regs_res: The resource that was allocated when claiming register space. * @irq: The IRQ number we are using + * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos. * @debug_root: root directrory for debugfs. * @debug_file: main status file for debugfs. * @debug_fifo: FIFO status file for debugfs. @@ -145,6 +152,9 @@ struct s3c_hsotg { void __iomem *regs; struct resource *regs_res; int irq; + struct clk *clk; + + unsigned int dedicated_fifos:1; struct dentry *debug_root; struct dentry *debug_file; @@ -310,11 +320,11 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg) hsotg->regs + S3C_GNPTXFSIZ); */ - /* set FIFO sizes to 2048/0x1C0 */ + /* set FIFO sizes to 2048/1024 */ writel(2048, hsotg->regs + S3C_GRXFSIZ); writel(S3C_GNPTXFSIZ_NPTxFStAddr(2048) | - S3C_GNPTXFSIZ_NPTxFDep(0x1C0), + S3C_GNPTXFSIZ_NPTxFDep(1024), hsotg->regs + S3C_GNPTXFSIZ); /* arange all the rest of the TX FIFOs, as some versions of this @@ -464,7 +474,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (to_write == 0) return 0; - if (periodic) { + if (periodic && !hsotg->dedicated_fifos) { u32 epsize = readl(hsotg->regs + S3C_DIEPTSIZ(hs_ep->index)); int size_left; int size_done; @@ -474,6 +484,14 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); + /* if shared fifo, we cannot write anything until the + * previous data has been completely sent. + */ + if (hs_ep->fifo_load != 0) { + s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); + return -ENOSPC; + } + dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n", __func__, size_left, hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size); @@ -494,6 +512,11 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_PTxFEmp); return -ENOSPC; } + } else if (hsotg->dedicated_fifos && hs_ep->index != 0) { + can_write = readl(hsotg->regs + S3C_DTXFSTS(hs_ep->index)); + + can_write &= 0xffff; + can_write *= 4; } else { if (S3C_GNPTXSTS_NPTxQSpcAvail_GET(gnptxsts) == 0) { dev_dbg(hsotg->dev, @@ -505,6 +528,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, } can_write = S3C_GNPTXSTS_NPTxFSpcAvail_GET(gnptxsts); + can_write *= 4; /* fifo size is in 32bit quantities. */ } dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, mps %d\n", @@ -517,6 +541,17 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, if (can_write > 512) can_write = 512; + /* limit the write to one max-packet size worth of data, but allow + * the transfer to return that it did not run out of fifo space + * doing it. */ + if (to_write > hs_ep->ep.maxpacket) { + to_write = hs_ep->ep.maxpacket; + + s3c_hsotg_en_gsint(hsotg, + periodic ? S3C_GINTSTS_PTxFEmp : + S3C_GINTSTS_NPTxFEmp); + } + /* see if we can write data */ if (to_write > can_write) { @@ -579,12 +614,10 @@ static unsigned get_ep_limit(struct s3c_hsotg_ep *hs_ep) maxsize = S3C_DxEPTSIZ_XferSize_LIMIT + 1; maxpkt = S3C_DxEPTSIZ_PktCnt_LIMIT + 1; } else { + maxsize = 64+64; if (hs_ep->dir_in) { - /* maxsize = S3C_DIEPTSIZ0_XferSize_LIMIT + 1; */ - maxsize = 64+64+1; maxpkt = S3C_DIEPTSIZ0_PktCnt_LIMIT + 1; } else { - maxsize = 0x3f; maxpkt = 2; } } @@ -1353,6 +1386,9 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) read_ptr = hs_req->req.actual; max_req = hs_req->req.length - read_ptr; + dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", + __func__, to_read, max_req, read_ptr, hs_req->req.length); + if (to_read > max_req) { /* more data appeared than we where willing * to deal with in this request. @@ -1362,9 +1398,6 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) WARN_ON_ONCE(1); } - dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n", - __func__, to_read, max_req, read_ptr, hs_req->req.length); - hs_ep->total_data += to_read; hs_req->req.actual += to_read; to_read = DIV_ROUND_UP(to_read, 4); @@ -1433,9 +1466,11 @@ static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg, static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, int epnum, bool was_setup) { + u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); struct s3c_hsotg_ep *hs_ep = &hsotg->eps[epnum]; struct s3c_hsotg_req *hs_req = hs_ep->req; struct usb_request *req = &hs_req->req; + unsigned size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); int result = 0; if (!hs_req) { @@ -1444,9 +1479,7 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, } if (using_dma(hsotg)) { - u32 epsize = readl(hsotg->regs + S3C_DOEPTSIZ(epnum)); unsigned size_done; - unsigned size_left; /* Calculate the size of the transfer by checking how much * is left in the endpoint size register and then working it @@ -1456,14 +1489,18 @@ static void s3c_hsotg_handle_outdone(struct s3c_hsotg *hsotg, * so may overshoot/undershoot the transfer. */ - size_left = S3C_DxEPTSIZ_XferSize_GET(epsize); - size_done = hs_ep->size_loaded - size_left; size_done += hs_ep->last_load; req->actual = size_done; } + /* if there is more request to do, schedule new transfer */ + if (req->actual < req->length && size_left == 0) { + s3c_hsotg_start_req(hsotg, hs_ep, hs_req, true); + return; + } + if (req->actual < req->length && req->short_not_ok) { dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n", __func__, req->actual, req->length); @@ -1758,7 +1795,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, if (dir_in) { s3c_hsotg_complete_in(hsotg, hs_ep); - if (idx == 0) + if (idx == 0 && !hs_ep->req) s3c_hsotg_enqueue_setup(hsotg); } else if (using_dma(hsotg)) { /* We're using DMA, we need to fire an OutDone here @@ -1818,6 +1855,15 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx, __func__, idx); clear |= S3C_DIEPMSK_INTknEPMisMsk; } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (hsotg->dedicated_fifos && + ints & S3C_DIEPMSK_TxFIFOEmpty) { + dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + s3c_hsotg_trytx(hsotg, hs_ep); + clear |= S3C_DIEPMSK_TxFIFOEmpty; + } } writel(clear, hsotg->regs + epint_reg); @@ -2071,17 +2117,12 @@ irq_retry: kill_all_requests(hsotg, &hsotg->eps[0], -ECONNRESET, true); /* it seems after a reset we can end up with a situation - * where the TXFIFO still has data in it... try flushing - * it to remove anything that may still be in it. + * where the TXFIFO still has data in it... the docs + * suggest resetting all the fifos, so use the init_fifo + * code to relayout and flush the fifos. */ - if (1) { - writel(S3C_GRSTCTL_TxFNum(0) | S3C_GRSTCTL_TxFFlsh, - hsotg->regs + S3C_GRSTCTL); - - dev_info(hsotg->dev, "GNPTXSTS=%08x\n", - readl(hsotg->regs + S3C_GNPTXSTS)); - } + s3c_hsotg_init_fifo(hsotg); s3c_hsotg_enqueue_setup(hsotg); @@ -2274,6 +2315,12 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep, break; } + /* if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && hsotg->dedicated_fifos) + epctrl |= S3C_DxEPCTL_TxFNum(index); + /* for non control endpoints, set PID to D0 */ if (index) epctrl |= S3C_DxEPCTL_SetD0PID; @@ -2563,7 +2610,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | S3C_DIEPMSK_INTknEPMisMsk | - S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk, + S3C_DIEPMSK_EPDisbldMsk | S3C_DIEPMSK_XferComplMsk | + ((hsotg->dedicated_fifos) ? S3C_DIEPMSK_TxFIFOEmpty : 0), hsotg->regs + S3C_DIEPMSK); /* don't need XferCompl, we get that from RXFIFO in slave mode. In @@ -2732,7 +2780,7 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ ptxfifo = readl(hsotg->regs + S3C_DPTXFSIZn(epnum)); - hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo); + hs_ep->fifo_size = S3C_DPTXFSIZn_DPTxFSize_GET(ptxfifo) * 4; /* if we're using dma, we need to set the next-endpoint pointer * to be something valid. @@ -2753,13 +2801,33 @@ static void __devinit s3c_hsotg_initep(struct s3c_hsotg *hsotg, */ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) { - u32 osc; + struct clk *xusbxti; + u32 pwr, osc; - writel(0, S3C_PHYPWR); + pwr = readl(S3C_PHYPWR); + pwr &= ~0x19; + writel(pwr, S3C_PHYPWR); mdelay(1); osc = hsotg->plat->is_osc ? S3C_PHYCLK_EXT_OSC : 0; + xusbxti = clk_get(hsotg->dev, "xusbxti"); + if (xusbxti && !IS_ERR(xusbxti)) { + switch (clk_get_rate(xusbxti)) { + case 12*MHZ: + osc |= S3C_PHYCLK_CLKSEL_12M; + break; + case 24*MHZ: + osc |= S3C_PHYCLK_CLKSEL_24M; + break; + default: + case 48*MHZ: + /* default reference clock */ + break; + } + clk_put(xusbxti); + } + writel(osc | 0x10, S3C_PHYCLK); /* issue a full set of resets to the otg and core */ @@ -2772,6 +2840,8 @@ static void s3c_hsotg_otgreset(struct s3c_hsotg *hsotg) static void s3c_hsotg_init(struct s3c_hsotg *hsotg) { + u32 cfg4; + /* unmask subset of endpoint interrupts */ writel(S3C_DIEPMSK_TimeOUTMsk | S3C_DIEPMSK_AHBErrMsk | @@ -2807,6 +2877,14 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) writel(using_dma(hsotg) ? S3C_GAHBCFG_DMAEn : 0x0, hsotg->regs + S3C_GAHBCFG); + + /* check hardware configuration */ + + cfg4 = readl(hsotg->regs + 0x50); + hsotg->dedicated_fifos = (cfg4 >> 25) & 1; + + dev_info(hsotg->dev, "%s fifos\n", + hsotg->dedicated_fifos ? "dedicated" : "shared"); } static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) @@ -3181,13 +3259,20 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) hsotg->dev = dev; hsotg->plat = plat; + hsotg->clk = clk_get(&pdev->dev, "otg"); + if (IS_ERR(hsotg->clk)) { + dev_err(dev, "cannot get otg clock\n"); + ret = -EINVAL; + goto err_mem; + } + platform_set_drvdata(pdev, hsotg); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "cannot find register resource 0\n"); ret = -EINVAL; - goto err_mem; + goto err_clk; } hsotg->regs_res = request_mem_region(res->start, resource_size(res), @@ -3195,7 +3280,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (!hsotg->regs_res) { dev_err(dev, "cannot reserve registers\n"); ret = -ENOENT; - goto err_mem; + goto err_clk; } hsotg->regs = ioremap(res->start, resource_size(res)); @@ -3248,6 +3333,8 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) /* reset the system */ + clk_enable(hsotg->clk); + s3c_hsotg_gate(pdev, true); s3c_hsotg_otgreset(hsotg); @@ -3271,7 +3358,8 @@ err_regs: err_regs_res: release_resource(hsotg->regs_res); kfree(hsotg->regs_res); - +err_clk: + clk_put(hsotg->clk); err_mem: kfree(hsotg); return ret; @@ -3293,6 +3381,9 @@ static int __devexit s3c_hsotg_remove(struct platform_device *pdev) s3c_hsotg_gate(pdev, false); + clk_disable(hsotg->clk); + clk_put(hsotg->clk); + kfree(hsotg); return 0; } diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index f46a60962dab..b22eedbc7dc5 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -137,7 +137,7 @@ MODULE_PARM_DESC(n_ports, "number of ports to create, default=1"); /*-------------------------------------------------------------------------*/ -static int __init serial_bind_config(struct usb_configuration *c) +static int __ref serial_bind_config(struct usb_configuration *c) { unsigned i; int status = 0; @@ -161,7 +161,7 @@ static struct usb_configuration serial_config_driver = { .bmAttributes = USB_CONFIG_ATT_SELFPOWER, }; -static int __init gs_bind(struct usb_composite_dev *cdev) +static int __ref gs_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index 04c462ff0ea6..484acfb1a7c5 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -57,10 +57,12 @@ #include <asm/unaligned.h> -/* Thanks to NetChip Technologies for donating this product ID. +/* + * Thanks to NetChip Technologies for donating this product ID. * * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. */ + * Instead: allocate your own, using normal USB-IF procedures. + */ #define FSG_VENDOR_ID 0x0525 /* NetChip */ #define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ @@ -84,14 +86,27 @@ #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) -/* Keep those macros in sync with thos in - * include/linux/ubs/composite.h or else GCC will complain. If they +/* + * Keep those macros in sync with those in + * include/linux/usb/composite.h or else GCC will complain. If they * are identical (the same names of arguments, white spaces in the * same places) GCC will allow redefinition otherwise (even if some - * white space is removed or added) warning will be issued. No - * checking if those symbols is defined is performed because warning - * is desired when those macros were defined by someone else to mean - * something else. */ + * white space is removed or added) warning will be issued. + * + * Those macros are needed here because File Storage Gadget does not + * include the composite.h header. For composite gadgets those macros + * are redundant since composite.h is included any way. + * + * One could check whether those macros are already defined (which + * would indicate composite.h had been included) or not (which would + * indicate we were in FSG) but this is not done because a warning is + * desired if definitions here differ from the ones in composite.h. + * + * We want the definitions to match and be the same in File Storage + * Gadget as well as Mass Storage Function (and so composite gadgets + * using MSF). If someone changes them in composite.h it will produce + * a warning in this file when building MSF. + */ #define DBG(d, fmt, args...) dev_dbg(&(d)->gadget->dev , fmt , ## args) #define VDBG(d, fmt, args...) dev_vdbg(&(d)->gadget->dev , fmt , ## args) #define ERROR(d, fmt, args...) dev_err(&(d)->gadget->dev , fmt , ## args) @@ -269,6 +284,7 @@ struct fsg_lun { unsigned int prevent_medium_removal:1; unsigned int registered:1; unsigned int info_valid:1; + unsigned int nofua:1; u32 sense_data; u32 sense_data_info; @@ -313,9 +329,11 @@ struct fsg_buffhd { enum fsg_buffer_state state; struct fsg_buffhd *next; - /* The NetChip 2280 is faster, and handles some protocol faults + /* + * The NetChip 2280 is faster, and handles some protocol faults * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. */ + * So we will record the intended request length here. + */ unsigned int bulk_out_intended_length; struct usb_request *inreq; @@ -395,8 +413,10 @@ fsg_intf_desc = { .iInterface = FSG_STRING_INTERFACE, }; -/* Three full-speed endpoint descriptors: bulk-in, bulk-out, - * and interrupt-in. */ +/* + * Three full-speed endpoint descriptors: bulk-in, bulk-out, and + * interrupt-in. + */ static struct usb_endpoint_descriptor fsg_fs_bulk_in_desc = { @@ -459,7 +479,7 @@ static struct usb_descriptor_header *fsg_fs_function[] = { * * That means alternate endpoint descriptors (bigger packets) * and a "device qualifier" ... plus more construction options - * for the config descriptor. + * for the configuration descriptor. */ static struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { @@ -547,8 +567,10 @@ static struct usb_gadget_strings fsg_stringtab = { /*-------------------------------------------------------------------------*/ -/* If the next two routines are called while the gadget is registered, - * the caller must own fsg->filesem for writing. */ +/* + * If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. + */ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) { @@ -587,8 +609,10 @@ static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) goto out; } - /* If we can't read the file, it's no good. - * If we can't write the file, use it read-only. */ + /* + * If we can't read the file, it's no good. + * If we can't write the file, use it read-only. + */ if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { LINFO(curlun, "file not readable: %s\n", filename); goto out; @@ -646,8 +670,10 @@ static void fsg_lun_close(struct fsg_lun *curlun) /*-------------------------------------------------------------------------*/ -/* Sync the file data, don't bother with the metadata. - * This code was copied from fs/buffer.c:sys_fdatasync(). */ +/* + * Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). + */ static int fsg_lun_fsync_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; @@ -689,6 +715,14 @@ static ssize_t fsg_show_ro(struct device *dev, struct device_attribute *attr, : curlun->initially_ro); } +static ssize_t fsg_show_nofua(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + + return sprintf(buf, "%u\n", curlun->nofua); +} + static ssize_t fsg_show_file(struct device *dev, struct device_attribute *attr, char *buf) { @@ -723,26 +757,47 @@ static ssize_t fsg_store_ro(struct device *dev, struct device_attribute *attr, ssize_t rc = count; struct fsg_lun *curlun = fsg_lun_from_dev(dev); struct rw_semaphore *filesem = dev_get_drvdata(dev); - int i; + unsigned long ro; - if (sscanf(buf, "%d", &i) != 1) + if (strict_strtoul(buf, 2, &ro)) return -EINVAL; - /* Allow the write-enable status to change only while the backing file - * is closed. */ + /* + * Allow the write-enable status to change only while the + * backing file is closed. + */ down_read(filesem); if (fsg_lun_is_open(curlun)) { LDBG(curlun, "read-only status change prevented\n"); rc = -EBUSY; } else { - curlun->ro = !!i; - curlun->initially_ro = !!i; + curlun->ro = ro; + curlun->initially_ro = ro; LDBG(curlun, "read-only status set to %d\n", curlun->ro); } up_read(filesem); return rc; } +static ssize_t fsg_store_nofua(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct fsg_lun *curlun = fsg_lun_from_dev(dev); + unsigned long nofua; + + if (strict_strtoul(buf, 2, &nofua)) + return -EINVAL; + + /* Sync data when switching from async mode to sync */ + if (!nofua && curlun->nofua) + fsg_lun_fsync_sub(curlun); + + curlun->nofua = nofua; + + return count; +} + static ssize_t fsg_store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 1da755a1c855..6bb876d65252 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -704,17 +704,6 @@ static char *host_addr; module_param(host_addr, charp, S_IRUGO); MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); - -static u8 __init nibble(unsigned char c) -{ - if (isdigit(c)) - return c - '0'; - c = toupper(c); - if (isxdigit(c)) - return 10 + c - 'A'; - return 0; -} - static int get_ether_addr(const char *str, u8 *dev_addr) { if (str) { @@ -725,8 +714,8 @@ static int get_ether_addr(const char *str, u8 *dev_addr) if ((*str == '.') || (*str == ':')) str++; - num = nibble(*str++) << 4; - num |= (nibble(*str++)); + num = hex_to_bin(*str++) << 4; + num |= hex_to_bin(*str++); dev_addr [i] = num; } if (is_valid_ether_addr(dev_addr)) diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 3e8dcb5455e3..01e5354a4c20 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -18,6 +18,7 @@ /* #define VERBOSE_DEBUG */ #include <linux/kernel.h> +#include <linux/sched.h> #include <linux/interrupt.h> #include <linux/device.h> #include <linux/delay.h> diff --git a/drivers/usb/gadget/webcam.c b/drivers/usb/gadget/webcam.c index 288d21155abe..de1deb7a3c63 100644 --- a/drivers/usb/gadget/webcam.c +++ b/drivers/usb/gadget/webcam.c @@ -308,7 +308,7 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = { * USB configuration */ -static int __init +static int __ref webcam_config_bind(struct usb_configuration *c) { return uvc_bind_config(c, uvc_control_cls, uvc_fs_streaming_cls, @@ -330,7 +330,7 @@ webcam_unbind(struct usb_composite_dev *cdev) return 0; } -static int __init +static int __ref webcam_bind(struct usb_composite_dev *cdev) { int ret; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 807280d069f9..cf353920bb1c 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -264,7 +264,7 @@ static void zero_resume(struct usb_composite_dev *cdev) /*-------------------------------------------------------------------------*/ -static int __init zero_bind(struct usb_composite_dev *cdev) +static int __ref zero_bind(struct usb_composite_dev *cdev) { int gcnum; struct usb_gadget *gadget = cdev->gadget; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index f865be2276d4..2d926cec0725 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -72,8 +72,9 @@ config USB_EHCI_ROOT_HUB_TT from ARC, and has since changed hands a few times. config USB_EHCI_TT_NEWSCHED - bool "Improved Transaction Translator scheduling (EXPERIMENTAL)" - depends on USB_EHCI_HCD && EXPERIMENTAL + bool "Improved Transaction Translator scheduling" + depends on USB_EHCI_HCD + default y ---help--- This changes the periodic scheduling code to fill more of the low and full speed bandwidth available from the Transaction Translator @@ -84,9 +85,11 @@ config USB_EHCI_TT_NEWSCHED If you have multiple periodic low/fullspeed devices connected to a highspeed USB hub which is connected to a highspeed USB Host Controller, and some of those devices will not work correctly - (possibly due to "ENOSPC" or "-28" errors), say Y. + (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if + you have only one such device and it doesn't work, you could try + saying N. - If unsure, say N. + If unsure, say Y. config USB_EHCI_BIG_ENDIAN_MMIO bool diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index faa61748db70..2baf8a849086 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -228,7 +228,7 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev) * the root hub is either suspended or stopped. */ spin_lock_irqsave(&ehci->lock, flags); - ehci_prepare_ports_for_controller_suspend(ehci); + ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 874d2000bf92..76b7fd2d838a 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -98,13 +98,18 @@ static void dbg_hcc_params (struct ehci_hcd *ehci, char *label) HCC_64BIT_ADDR(params) ? " 64 bit addr" : ""); } else { ehci_dbg (ehci, - "%s hcc_params %04x thresh %d uframes %s%s%s\n", + "%s hcc_params %04x thresh %d uframes %s%s%s%s%s%s%s\n", label, params, HCC_ISOC_THRES(params), HCC_PGM_FRAMELISTLEN(params) ? "256/512/1024" : "1024", HCC_CANPARK(params) ? " park" : "", - HCC_64BIT_ADDR(params) ? " 64 bit addr" : ""); + HCC_64BIT_ADDR(params) ? " 64 bit addr" : "", + HCC_LPM(params) ? " LPM" : "", + HCC_PER_PORT_CHANGE_EVENT(params) ? " ppce" : "", + HCC_HW_PREFETCH(params) ? " hw prefetch" : "", + HCC_32FRAME_PERIODIC_LIST(params) ? + " 32 peridic list" : ""); } } #else @@ -191,8 +196,9 @@ static int __maybe_unused dbg_status_buf (char *buf, unsigned len, const char *label, u32 status) { return scnprintf (buf, len, - "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s", + "%s%sstatus %04x%s%s%s%s%s%s%s%s%s%s%s", label, label [0] ? " " : "", status, + (status & STS_PPCE_MASK) ? " PPCE" : "", (status & STS_ASS) ? " Async" : "", (status & STS_PSS) ? " Periodic" : "", (status & STS_RECL) ? " Recl" : "", @@ -210,8 +216,9 @@ static int __maybe_unused dbg_intr_buf (char *buf, unsigned len, const char *label, u32 enable) { return scnprintf (buf, len, - "%s%sintrenable %02x%s%s%s%s%s%s", + "%s%sintrenable %02x%s%s%s%s%s%s%s", label, label [0] ? " " : "", enable, + (enable & STS_PPCE_MASK) ? " PPCE" : "", (enable & STS_IAA) ? " IAA" : "", (enable & STS_FATAL) ? " FATAL" : "", (enable & STS_FLR) ? " FLR" : "", @@ -228,9 +235,15 @@ static int dbg_command_buf (char *buf, unsigned len, const char *label, u32 command) { return scnprintf (buf, len, - "%s%scommand %06x %s=%d ithresh=%d%s%s%s%s period=%s%s %s", + "%s%scommand %07x %s%s%s%s%s%s=%d ithresh=%d%s%s%s%s " + "period=%s%s %s", label, label [0] ? " " : "", command, - (command & CMD_PARK) ? "park" : "(park)", + (command & CMD_HIRD) ? " HIRD" : "", + (command & CMD_PPCEE) ? " PPCEE" : "", + (command & CMD_FSP) ? " FSP" : "", + (command & CMD_ASPE) ? " ASPE" : "", + (command & CMD_PSPE) ? " PSPE" : "", + (command & CMD_PARK) ? " park" : "(park)", CMD_PARK_CNT (command), (command >> 16) & 0x3f, (command & CMD_LRESET) ? " LReset" : "", @@ -257,11 +270,22 @@ dbg_port_buf (char *buf, unsigned len, const char *label, int port, u32 status) } return scnprintf (buf, len, - "%s%sport %d status %06x%s%s sig=%s%s%s%s%s%s%s%s%s%s", + "%s%sport:%d status %06x %d %s%s%s%s%s%s " + "sig=%s%s%s%s%s%s%s%s%s%s%s", label, label [0] ? " " : "", port, status, + status>>25,/*device address */ + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ACK ? + " ACK" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_NYET ? + " NYET" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_STALL ? + " STALL" : "", + (status & PORT_SSTS)>>23 == PORTSC_SUSPEND_STS_ERR ? + " ERR" : "", (status & PORT_POWER) ? " POWER" : "", (status & PORT_OWNER) ? " OWNER" : "", sig, + (status & PORT_LPM) ? " LPM" : "", (status & PORT_RESET) ? " RESET" : "", (status & PORT_SUSPEND) ? " SUSPEND" : "", (status & PORT_RESUME) ? " RESUME" : "", @@ -330,6 +354,13 @@ static int debug_async_open(struct inode *, struct file *); static int debug_periodic_open(struct inode *, struct file *); static int debug_registers_open(struct inode *, struct file *); static int debug_async_open(struct inode *, struct file *); +static int debug_lpm_open(struct inode *, struct file *); +static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +static ssize_t debug_lpm_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos); +static int debug_lpm_close(struct inode *inode, struct file *file); + static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*); static int debug_close(struct inode *, struct file *); @@ -351,6 +382,13 @@ static const struct file_operations debug_registers_fops = { .read = debug_output, .release = debug_close, }; +static const struct file_operations debug_lpm_fops = { + .owner = THIS_MODULE, + .open = debug_lpm_open, + .read = debug_lpm_read, + .write = debug_lpm_write, + .release = debug_lpm_close, +}; static struct dentry *ehci_debug_root; @@ -674,7 +712,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) spin_lock_irqsave (&ehci->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { size = scnprintf (next, size, "bus %s, device %s\n" "%s\n" @@ -917,51 +955,127 @@ static int debug_registers_open(struct inode *inode, struct file *file) return file->private_data ? 0 : -ENOMEM; } +static int debug_lpm_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static int debug_lpm_close(struct inode *inode, struct file *file) +{ + return 0; +} + +static ssize_t debug_lpm_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + /* TODO: show lpm stats */ + return 0; +} + +static ssize_t debug_lpm_write(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + char buf[50]; + size_t len; + u32 temp; + unsigned long port; + u32 __iomem *portsc ; + u32 params; + + hcd = bus_to_hcd(file->private_data); + ehci = hcd_to_ehci(hcd); + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + buf[len] = '\0'; + if (len > 0 && buf[len - 1] == '\n') + buf[len - 1] = '\0'; + + if (strncmp(buf, "enable", 5) == 0) { + if (strict_strtoul(buf + 7, 10, &port)) + return -EINVAL; + params = ehci_readl(ehci, &ehci->caps->hcs_params); + if (port > HCS_N_PORTS(params)) { + ehci_dbg(ehci, "ERR: LPM on bad port %lu\n", port); + return -ENODEV; + } + portsc = &ehci->regs->port_status[port-1]; + temp = ehci_readl(ehci, portsc); + if (!(temp & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "LPM: no device attached\n"); + return -ENODEV; + } + temp |= PORT_LPM; + ehci_writel(ehci, temp, portsc); + printk(KERN_INFO "force enable LPM for port %lu\n", port); + } else if (strncmp(buf, "hird=", 5) == 0) { + unsigned long hird; + if (strict_strtoul(buf + 5, 16, &hird)) + return -EINVAL; + printk(KERN_INFO "setting hird %s %lu\n", buf + 6, hird); + temp = ehci_readl(ehci, &ehci->regs->command); + temp &= ~CMD_HIRD; + temp |= hird << 24; + ehci_writel(ehci, temp, &ehci->regs->command); + } else if (strncmp(buf, "disable", 7) == 0) { + if (strict_strtoul(buf + 8, 10, &port)) + return -EINVAL; + params = ehci_readl(ehci, &ehci->caps->hcs_params); + if (port > HCS_N_PORTS(params)) { + ehci_dbg(ehci, "ERR: LPM off bad port %lu\n", port); + return -ENODEV; + } + portsc = &ehci->regs->port_status[port-1]; + temp = ehci_readl(ehci, portsc); + if (!(temp & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "ERR: no device attached\n"); + return -ENODEV; + } + temp &= ~PORT_LPM; + ehci_writel(ehci, temp, portsc); + printk(KERN_INFO "disabled LPM for port %lu\n", port); + } else + return -EOPNOTSUPP; + return count; +} + static inline void create_debug_files (struct ehci_hcd *ehci) { struct usb_bus *bus = &ehci_to_hcd(ehci)->self; ehci->debug_dir = debugfs_create_dir(bus->bus_name, ehci_debug_root); if (!ehci->debug_dir) - goto dir_error; - - ehci->debug_async = debugfs_create_file("async", S_IRUGO, - ehci->debug_dir, bus, - &debug_async_fops); - if (!ehci->debug_async) - goto async_error; - - ehci->debug_periodic = debugfs_create_file("periodic", S_IRUGO, - ehci->debug_dir, bus, - &debug_periodic_fops); - if (!ehci->debug_periodic) - goto periodic_error; - - ehci->debug_registers = debugfs_create_file("registers", S_IRUGO, - ehci->debug_dir, bus, - &debug_registers_fops); - if (!ehci->debug_registers) - goto registers_error; + return; + + if (!debugfs_create_file("async", S_IRUGO, ehci->debug_dir, bus, + &debug_async_fops)) + goto file_error; + + if (!debugfs_create_file("periodic", S_IRUGO, ehci->debug_dir, bus, + &debug_periodic_fops)) + goto file_error; + + if (!debugfs_create_file("registers", S_IRUGO, ehci->debug_dir, bus, + &debug_registers_fops)) + goto file_error; + + if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus, + &debug_lpm_fops)) + goto file_error; + return; -registers_error: - debugfs_remove(ehci->debug_periodic); -periodic_error: - debugfs_remove(ehci->debug_async); -async_error: - debugfs_remove(ehci->debug_dir); -dir_error: - ehci->debug_periodic = NULL; - ehci->debug_async = NULL; - ehci->debug_dir = NULL; +file_error: + debugfs_remove_recursive(ehci->debug_dir); } static inline void remove_debug_files (struct ehci_hcd *ehci) { - debugfs_remove(ehci->debug_registers); - debugfs_remove(ehci->debug_periodic); - debugfs_remove(ehci->debug_async); - debugfs_remove(ehci->debug_dir); + debugfs_remove_recursive(ehci->debug_dir); } #endif /* STUB_DEBUG_FILES */ diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 5cd967d28938..a416421abfa2 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -313,7 +313,8 @@ static int ehci_fsl_drv_suspend(struct device *dev) struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd); void __iomem *non_ehci = hcd->regs; - ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd)); + ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), + device_may_wakeup(dev)); if (!fsl_deep_sleep()) return 0; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index a3ef2a9d9dc2..34a928d3b7d2 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -36,6 +36,7 @@ #include <linux/dma-mapping.h> #include <linux/debugfs.h> #include <linux/slab.h> +#include <linux/uaccess.h> #include <asm/byteorder.h> #include <asm/io.h> @@ -78,7 +79,13 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_TUNE_RL_TT 0 #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ #define EHCI_TUNE_MULT_TT 1 -#define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ +/* + * Some drivers think it's safe to schedule isochronous transfers more than + * 256 ms into the future (partly as a result of an old bug in the scheduling + * code). In an attempt to avoid trouble, we will use a minimum scheduling + * length of 512 frames instead of 256. + */ +#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */ #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ @@ -100,6 +107,11 @@ static int ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); +/* for link power management(LPM) feature */ +static unsigned int hird; +module_param(hird, int, S_IRUGO); +MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n"); + #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ @@ -304,6 +316,7 @@ static void end_unlink_async(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); #include "ehci-hub.c" +#include "ehci-lpm.c" #include "ehci-mem.c" #include "ehci-q.c" #include "ehci-sched.c" @@ -577,6 +590,11 @@ static int ehci_init(struct usb_hcd *hcd) if (log2_irq_thresh < 0 || log2_irq_thresh > 6) log2_irq_thresh = 0; temp = 1 << (16 + log2_irq_thresh); + if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) { + ehci->has_ppcd = 1; + ehci_dbg(ehci, "enable per-port change event\n"); + temp |= CMD_PPCEE; + } if (HCC_CANPARK(hcc_params)) { /* HW default park == 3, on hardware that supports it (like * NVidia and ALI silicon), maximizes throughput on the async @@ -603,10 +621,22 @@ static int ehci_init(struct usb_hcd *hcd) default: BUG(); } } + if (HCC_LPM(hcc_params)) { + /* support link power management EHCI 1.1 addendum */ + ehci_dbg(ehci, "support lpm\n"); + ehci->has_lpm = 1; + if (hird > 0xf) { + ehci_dbg(ehci, "hird %d invalid, use default 0", + hird); + hird = 0; + } + temp |= hird << 24; + } ehci->command = temp; /* Accept arbitrarily long scatter-gather lists */ - hcd->self.sg_tablesize = ~0; + if (!(hcd->driver->flags & HCD_LOCAL_MEM)) + hcd->self.sg_tablesize = ~0; return 0; } @@ -619,7 +649,6 @@ static int ehci_run (struct usb_hcd *hcd) u32 hcc_params; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; /* EHCI spec section 4.1 */ if ((retval = ehci_reset(ehci)) != 0) { @@ -764,6 +793,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* remote wakeup [4.3.1] */ if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); + u32 ppcd = 0; /* kick root hub later */ pcd_status = status; @@ -772,9 +802,18 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) if (!(cmd & CMD_RUN)) usb_hcd_resume_root_hub(hcd); + /* get per-port change detect bits */ + if (ehci->has_ppcd) + ppcd = status >> 16; + while (i--) { - int pstatus = ehci_readl(ehci, - &ehci->regs->port_status [i]); + int pstatus; + + /* leverage per-port change bits feature */ + if (ehci->has_ppcd && !(ppcd & (1 << i))) + continue; + pstatus = ehci_readl(ehci, + &ehci->regs->port_status[i]); if (pstatus & PORT_OWNER) continue; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index e7d3d8def282..796ea0c8900f 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) } static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, - bool suspending) + bool suspending, bool do_wakeup) { int port; u32 temp; @@ -117,8 +117,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, * when the controller is suspended or resumed. In all other * cases they don't need to be changed. */ - if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || - device_may_wakeup(ehci_to_hcd(ehci)->self.controller)) + if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) return; /* clear phy low-power mode before changing wakeup flags */ @@ -167,6 +166,10 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg); } } + + /* Does the root hub have a port wakeup pending? */ + if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) + usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); } static int ehci_bus_suspend (struct usb_hcd *hcd) @@ -316,7 +319,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd) if (time_before (jiffies, ehci->next_statechange)) msleep(5); spin_lock_irq (&ehci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { spin_unlock_irq(&ehci->lock); return -ESHUTDOWN; } @@ -603,6 +606,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) u32 mask; int ports, i, retval = 1; unsigned long flags; + u32 ppcd = 0; /* if !USB_SUSPEND, root hub timers won't get shut down ... */ if (!HC_IS_RUNNING(hcd->state)) @@ -632,7 +636,15 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf) /* port N changes (bit N)? */ spin_lock_irqsave (&ehci->lock, flags); + + /* get per-port change detect bits */ + if (ehci->has_ppcd) + ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16; + for (i = 0; i < ports; i++) { + /* leverage per-port change bits feature */ + if (ehci->has_ppcd && !(ppcd & (1 << i))) + continue; temp = ehci_readl(ehci, &ehci->regs->port_status [i]); /* @@ -790,6 +802,11 @@ static int ehci_hub_control ( status_reg); break; case USB_PORT_FEAT_C_CONNECTION: + if (ehci->has_lpm) { + /* clear PORTSC bits on disconnect */ + temp &= ~PORT_LPM; + temp &= ~PORT_DEV_ADDR; + } ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC, status_reg); break; diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c new file mode 100644 index 000000000000..b4d4d63c13ed --- /dev/null +++ b/drivers/usb/host/ehci-lpm.c @@ -0,0 +1,83 @@ +/* ehci-lpm.c EHCI HCD LPM support code + * Copyright (c) 2008 - 2010, Intel Corporation. + * Author: Jacob Pan <jacob.jun.pan@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* this file is part of ehci-hcd.c */ +static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) +{ + u32 __iomem portsc; + + ehci_dbg(ehci, "set dev address %d for port %d\n", dev_addr, port_num); + if (port_num > HCS_N_PORTS(ehci->hcs_params)) { + ehci_dbg(ehci, "invalid port number %d\n", port_num); + return -ENODEV; + } + portsc = ehci_readl(ehci, &ehci->regs->port_status[port_num-1]); + portsc &= ~PORT_DEV_ADDR; + portsc |= dev_addr<<25; + ehci_writel(ehci, portsc, &ehci->regs->port_status[port_num-1]); + return 0; +} + +/* + * this function is used to check if the device support LPM + * if yes, mark the PORTSC register with PORT_LPM bit + */ +static int ehci_lpm_check(struct ehci_hcd *ehci, int port) +{ + u32 __iomem *portsc ; + u32 val32; + int retval; + + portsc = &ehci->regs->port_status[port-1]; + val32 = ehci_readl(ehci, portsc); + if (!(val32 & PORT_DEV_ADDR)) { + ehci_dbg(ehci, "LPM: no device attached\n"); + return -ENODEV; + } + val32 |= PORT_LPM; + ehci_writel(ehci, val32, portsc); + msleep(5); + val32 |= PORT_SUSPEND; + ehci_dbg(ehci, "Sending LPM 0x%08x to port %d\n", val32, port); + ehci_writel(ehci, val32, portsc); + /* wait for ACK */ + msleep(10); + retval = handshake(ehci, &ehci->regs->port_status[port-1], PORT_SSTS, + PORTSC_SUSPEND_STS_ACK, 125); + dbg_port(ehci, "LPM", port, val32); + if (retval != -ETIMEDOUT) { + ehci_dbg(ehci, "LPM: device ACK for LPM\n"); + val32 |= PORT_LPM; + /* + * now device should be in L1 sleep, let's wake up the device + * so that we can complete enumeration. + */ + ehci_writel(ehci, val32, portsc); + msleep(10); + val32 |= PORT_RESUME; + ehci_writel(ehci, val32, portsc); + } else { + ehci_dbg(ehci, "LPM: device does not ACK, disable LPM %d\n", + retval); + val32 &= ~PORT_LPM; + retval = -ETIMEDOUT; + ehci_writel(ehci, val32, portsc); + } + + return retval; +} diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 5450e628157f..116ae280053a 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -38,6 +38,7 @@ #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/slab.h> +#include <linux/usb/ulpi.h> #include <plat/usb.h> /* @@ -236,6 +237,35 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask) /*-------------------------------------------------------------------------*/ +static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + unsigned reg = 0; + + reg = ULPI_FUNC_CTRL_RESET + /* FUNCTION_CTRL_SET register */ + | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT) + /* Write */ + | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT) + /* PORTn */ + | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT) + /* start ULPI access*/ + | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); + + ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg); + + /* Wait for ULPI access completion */ + while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI) + & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(omap->dev, "phy reset operation timed out\n"); + break; + } + } +} + /* omap_start_ehc * - Start the TI USBHOST controller */ @@ -425,6 +455,12 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) gpio_set_value(omap->reset_gpio_port[1], 1); } + /* Soft reset the PHY using PHY reset command over ULPI */ + if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) + omap_ehci_soft_phy_reset(omap, 0); + if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) + omap_ehci_soft_phy_reset(omap, 1); + return 0; err_sys_status: diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index d43d176161aa..58b72d741d93 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -114,6 +114,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) break; case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + ehci->fs_i_thresh = 1; if (pdev->device == 0x27cc) { ehci->broken_periodic = 1; ehci_info(ehci, "using broken periodic workaround\n"); @@ -277,7 +278,7 @@ done: * Also they depend on separate root hub suspend/resume. */ -static int ehci_pci_suspend(struct usb_hcd *hcd) +static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); unsigned long flags; @@ -291,7 +292,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd) * the root hub is either suspended or stopped. */ spin_lock_irqsave (&ehci->lock, flags); - ehci_prepare_ports_for_controller_suspend(ehci); + ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); ehci_writel(ehci, 0, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable); @@ -361,6 +362,22 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) } #endif +static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int rc = 0; + + if (!udev->parent) /* udev is root hub itself, impossible */ + rc = -1; + /* we only support lpm device connected to root hub yet */ + if (ehci->has_lpm && !udev->parent->parent) { + rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum); + if (!rc) + rc = ehci_lpm_check(ehci, udev->portnum); + } + return rc; +} + static const struct hc_driver ehci_pci_hc_driver = { .description = hcd_name, .product_desc = "EHCI Host Controller", @@ -407,6 +424,11 @@ static const struct hc_driver ehci_pci_hc_driver = { .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, + /* + * call back when device connected and addressed + */ + .update_device = ehci_update_device, + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 11a79c4f4a9d..233c288e3f93 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1126,8 +1126,7 @@ submit_async ( #endif spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { rc = -ESHUTDOWN; goto done; } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 805ec633a652..a92526d6e5ae 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -880,8 +880,7 @@ static int intr_submit ( spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -1075,15 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) if (stream->ep) stream->ep->hcpriv = NULL; - if (stream->rescheduled) { - ehci_info (ehci, "ep%d%s-iso rescheduled " - "%lu times in %lu seconds\n", - stream->bEndpointAddress, is_in ? "in" : "out", - stream->rescheduled, - ((jiffies - stream->start)/HZ) - ); - } - kfree(stream); } } @@ -1396,30 +1386,25 @@ iso_stream_schedule ( struct ehci_iso_stream *stream ) { - u32 now, next, start, period; + u32 now, next, start, period, span; int status; unsigned mod = ehci->periodic_size << 3; struct ehci_iso_sched *sched = urb->hcpriv; - struct pci_dev *pdev; - if (sched->span > (mod - SCHEDULE_SLOP)) { - ehci_dbg (ehci, "iso request %p too long\n", urb); - status = -EFBIG; - goto fail; + period = urb->interval; + span = sched->span; + if (!stream->highspeed) { + period <<= 3; + span <<= 3; } - if ((stream->depth + sched->span) > mod) { - ehci_dbg (ehci, "request %p would overflow (%d+%d>%d)\n", - urb, stream->depth, sched->span, mod); + if (span > mod - SCHEDULE_SLOP) { + ehci_dbg (ehci, "iso request %p too long\n", urb); status = -EFBIG; goto fail; } - period = urb->interval; - if (!stream->highspeed) - period <<= 3; - - now = ehci_readl(ehci, &ehci->regs->frame_index) % mod; + now = ehci_readl(ehci, &ehci->regs->frame_index) & (mod - 1); /* Typical case: reuse current schedule, stream is still active. * Hopefully there are no gaps from the host falling behind @@ -1427,34 +1412,35 @@ iso_stream_schedule ( * slot in the schedule, implicitly assuming URB_ISO_ASAP. */ if (likely (!list_empty (&stream->td_list))) { - pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller); - start = stream->next_uframe; + u32 excess; /* For high speed devices, allow scheduling within the - * isochronous scheduling threshold. For full speed devices, - * don't. (Work around for Intel ICH9 bug.) + * isochronous scheduling threshold. For full speed devices + * and Intel PCI-based controllers, don't (work around for + * Intel ICH9 bug). */ - if (!stream->highspeed && - pdev->vendor == PCI_VENDOR_ID_INTEL) + if (!stream->highspeed && ehci->fs_i_thresh) next = now + ehci->i_thresh; else next = now; - /* Fell behind (by up to twice the slop amount)? */ - if (((start - next) & (mod - 1)) >= - mod - 2 * SCHEDULE_SLOP) - start += period * DIV_ROUND_UP( - (next - start) & (mod - 1), - period); - - /* Tried to schedule too far into the future? */ - if (unlikely(((start - now) & (mod - 1)) + sched->span - >= mod - 2 * SCHEDULE_SLOP)) { + /* Fell behind (by up to twice the slop amount)? + * We decide based on the time of the last currently-scheduled + * slot, not the time of the next available slot. + */ + excess = (stream->next_uframe - period - next) & (mod - 1); + if (excess >= mod - 2 * SCHEDULE_SLOP) + start = next + excess - mod + period * + DIV_ROUND_UP(mod - excess, period); + else + start = next + excess + period; + if (start - now >= mod) { + ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", + urb, start - now - period, period, + mod); status = -EFBIG; goto fail; } - stream->next_uframe = start; - goto ready; } /* need to schedule; when's the next (u)frame we could start? @@ -1463,51 +1449,60 @@ iso_stream_schedule ( * can also help high bandwidth if the dma and irq loads don't * jump until after the queue is primed. */ - start = SCHEDULE_SLOP + (now & ~0x07); - start %= mod; - stream->next_uframe = start; - - /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ - - /* find a uframe slot with enough bandwidth */ - for (; start < (stream->next_uframe + period); start++) { - int enough_space; - - /* check schedule: enough space? */ - if (stream->highspeed) - enough_space = itd_slot_ok (ehci, mod, start, - stream->usecs, period); - else { - if ((start % 8) >= 6) - continue; - enough_space = sitd_slot_ok (ehci, mod, stream, - start, sched, period); + else { + start = SCHEDULE_SLOP + (now & ~0x07); + + /* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */ + + /* find a uframe slot with enough bandwidth */ + next = start + period; + for (; start < next; start++) { + + /* check schedule: enough space? */ + if (stream->highspeed) { + if (itd_slot_ok(ehci, mod, start, + stream->usecs, period)) + break; + } else { + if ((start % 8) >= 6) + continue; + if (sitd_slot_ok(ehci, mod, stream, + start, sched, period)) + break; + } } - /* schedule it here if there's enough bandwidth */ - if (enough_space) { - stream->next_uframe = start % mod; - goto ready; + /* no room in the schedule */ + if (start == next) { + ehci_dbg(ehci, "iso resched full %p (now %d max %d)\n", + urb, now, now + mod); + status = -ENOSPC; + goto fail; } } - /* no room in the schedule */ - ehci_dbg (ehci, "iso %ssched full %p (now %d max %d)\n", - list_empty (&stream->td_list) ? "" : "re", - urb, now, now + mod); - status = -ENOSPC; + /* Tried to schedule too far into the future? */ + if (unlikely(start - now + span - period + >= mod - 2 * SCHEDULE_SLOP)) { + ehci_dbg(ehci, "request %p would overflow (%d+%d >= %d)\n", + urb, start - now, span - period, + mod - 2 * SCHEDULE_SLOP); + status = -EFBIG; + goto fail; + } -fail: - iso_sched_free (stream, sched); - urb->hcpriv = NULL; - return status; + stream->next_uframe = start & (mod - 1); -ready: /* report high speed start in uframes; full speed, in frames */ urb->start_frame = stream->next_uframe; if (!stream->highspeed) urb->start_frame >>= 3; return 0; + + fail: + iso_sched_free(stream, sched); + urb->hcpriv = NULL; + return status; } /*-------------------------------------------------------------------------*/ @@ -1602,7 +1597,7 @@ itd_link_urb ( struct ehci_iso_sched *iso_sched = urb->hcpriv; struct ehci_itd *itd; - next_uframe = stream->next_uframe % mod; + next_uframe = stream->next_uframe & (mod - 1); if (unlikely (list_empty(&stream->td_list))) { ehci_to_hcd(ehci)->self.bandwidth_allocated @@ -1613,7 +1608,6 @@ itd_link_urb ( (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out", urb->interval, next_uframe >> 3, next_uframe & 0x7); - stream->start = jiffies; } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -1639,14 +1633,13 @@ itd_link_urb ( itd_patch(ehci, itd, iso_sched, packet, uframe); next_uframe += stream->interval; - stream->depth += stream->interval; - next_uframe %= mod; + next_uframe &= mod - 1; packet++; /* link completed itds into the schedule */ if (((next_uframe >> 3) != frame) || packet == urb->number_of_packets) { - itd_link (ehci, frame % ehci->periodic_size, itd); + itd_link(ehci, frame & (ehci->periodic_size - 1), itd); itd = NULL; } } @@ -1695,7 +1688,6 @@ itd_complete ( t = hc32_to_cpup(ehci, &itd->hw_transaction [uframe]); itd->hw_transaction [uframe] = 0; - stream->depth -= stream->interval; /* report transfer status */ if (unlikely (t & ISO_ERRS)) { @@ -1815,8 +1807,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -2024,9 +2015,8 @@ sitd_link_urb ( "sched devp %s ep%d%s-iso [%d] %dms/%04x\n", urb->dev->devpath, stream->bEndpointAddress & 0x0f, (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out", - (next_uframe >> 3) % ehci->periodic_size, + (next_uframe >> 3) & (ehci->periodic_size - 1), stream->interval, hc32_to_cpu(ehci, stream->splits)); - stream->start = jiffies; } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -2047,13 +2037,12 @@ sitd_link_urb ( sitd->urb = urb; sitd_patch(ehci, stream, sitd, sched, packet); - sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size, + sitd_link(ehci, (next_uframe >> 3) & (ehci->periodic_size - 1), sitd); next_uframe += stream->interval << 3; - stream->depth += stream->interval << 3; } - stream->next_uframe = next_uframe % mod; + stream->next_uframe = next_uframe & (mod - 1); /* don't need that schedule data any more */ iso_sched_free (stream, sched); @@ -2111,7 +2100,6 @@ sitd_complete ( desc->actual_length = desc->length - SITD_LENGTH(t); urb->actual_length += desc->actual_length; } - stream->depth -= stream->interval << 3; /* handle completion now? */ if ((urb_index + 1) != urb->number_of_packets) @@ -2201,8 +2189,7 @@ static int sitd_submit (struct ehci_hcd *ehci, struct urb *urb, /* schedule ... need to lock */ spin_lock_irqsave (&ehci->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &ehci_to_hcd(ehci)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(ehci_to_hcd(ehci)))) { status = -ESHUTDOWN; goto done_not_linked; } @@ -2263,7 +2250,7 @@ scan_periodic (struct ehci_hcd *ehci) now_uframe = ehci->next_uframe; if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { clock = ehci_readl(ehci, &ehci->regs->frame_index); - clock_frame = (clock >> 3) % ehci->periodic_size; + clock_frame = (clock >> 3) & (ehci->periodic_size - 1); } else { clock = now_uframe + mod - 1; clock_frame = -1; @@ -2272,7 +2259,7 @@ scan_periodic (struct ehci_hcd *ehci) free_cached_lists(ehci); ehci->clock_frame = clock_frame; } - clock %= mod; + clock &= mod - 1; clock_frame = clock >> 3; for (;;) { @@ -2361,7 +2348,7 @@ restart: * frame is current. */ if (((frame == clock_frame) || - (((frame + 1) % ehci->periodic_size) + (((frame + 1) & (ehci->periodic_size - 1)) == clock_frame)) && live && (q.sitd->hw_results & @@ -2428,7 +2415,8 @@ restart: || ehci->periodic_sched == 0) break; ehci->next_uframe = now_uframe; - now = ehci_readl(ehci, &ehci->regs->frame_index) % mod; + now = ehci_readl(ehci, &ehci->regs->frame_index) & + (mod - 1); if (now_uframe == now) break; @@ -2441,7 +2429,7 @@ restart: } } else { now_uframe++; - now_uframe %= mod; + now_uframe &= mod - 1; } } } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 650a687f2854..bde823f704e9 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -130,6 +130,7 @@ struct ehci_hcd { /* one per controller */ unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; unsigned broken_periodic:1; + unsigned fs_i_thresh:1; /* Intel iso scheduling */ /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) @@ -140,7 +141,8 @@ struct ehci_hcd { /* one per controller */ #define OHCI_HCCTRL_LEN 0x4 __hc32 *ohci_hcctrl_reg; unsigned has_hostpc:1; - + unsigned has_lpm:1; /* support link power management */ + unsigned has_ppcd:1; /* support per-port change bits */ u8 sbrn; /* packed release number */ /* irq statistics */ @@ -154,9 +156,6 @@ struct ehci_hcd { /* one per controller */ /* debug files */ #ifdef DEBUG struct dentry *debug_dir; - struct dentry *debug_async; - struct dentry *debug_periodic; - struct dentry *debug_registers; #endif }; @@ -401,15 +400,12 @@ struct ehci_iso_stream { u32 refcount; u8 bEndpointAddress; u8 highspeed; - u16 depth; /* depth in uframes */ struct list_head td_list; /* queued itds/sitds */ struct list_head free_list; /* list of unused itds/sitds */ struct usb_device *udev; struct usb_host_endpoint *ep; /* output of (re)scheduling */ - unsigned long start; /* jiffies */ - unsigned long rescheduled; int next_uframe; __hc32 splits; @@ -538,11 +534,11 @@ struct ehci_fstn { /* Prepare the PORTSC wakeup flags during controller suspend/resume */ -#define ehci_prepare_ports_for_controller_suspend(ehci) \ - ehci_adjust_port_wakeup_flags(ehci, true); +#define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup) \ + ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup); -#define ehci_prepare_ports_for_controller_resume(ehci) \ - ehci_adjust_port_wakeup_flags(ehci, false); +#define ehci_prepare_ports_for_controller_resume(ehci) \ + ehci_adjust_port_wakeup_flags(ehci, false, false); /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 35742f8c7cda..9bfac657572e 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -159,7 +159,7 @@ static int hwahc_op_start(struct usb_hcd *usb_hcd) goto error_set_cluster_id; usb_hcd->uses_new_polling = 1; - usb_hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); usb_hcd->state = HC_STATE_RUNNING; result = 0; out: @@ -776,7 +776,7 @@ static int hwahc_probe(struct usb_interface *usb_iface, goto error_alloc; } usb_hcd->wireless = 1; - usb_hcd->flags |= HCD_FLAG_SAW_IRQ; + set_bit(HCD_FLAG_SAW_IRQ, &usb_hcd->flags); wusbhc = usb_hcd_to_wusbhc(usb_hcd); hwahc = container_of(wusbhc, struct hwahc, wusbhc); hwahc_init(hwahc); diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index ca0e98d8e1f4..3e5630369c31 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1521,7 +1521,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd) return -ETIMEDOUT; } spin_unlock_irq(&imx21->lock); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); spin_lock_irq(&imx21->lock); } spin_unlock_irqrestore(&imx21->lock, flags); diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h index d995351f9bed..0f97820e65be 100644 --- a/drivers/usb/host/isp1362.h +++ b/drivers/usb/host/isp1362.h @@ -8,29 +8,7 @@ /* * Platform specific compile time options */ -#if defined(CONFIG_ARCH_KARO) -#include <asm/arch/hardware.h> -#include <asm/arch/pxa-regs.h> -#include <asm/arch/karo.h> - -#define USE_32BIT 1 - - -/* These options are mutually eclusive */ -#define USE_PLATFORM_DELAY 1 -#define USE_NDELAY 0 -/* - * MAX_ROOT_PORTS: Number of downstream ports - * - * The chip has two USB ports, one of which can be configured as - * an USB device port, so the value of this constant is implementation - * specific. - */ -#define MAX_ROOT_PORTS 2 -#define DUMMY_DELAY_ACCESS do {} while (0) - -/* insert platform specific definitions for other machines here */ -#elif defined(CONFIG_BLACKFIN) +#if defined(CONFIG_BLACKFIN) #include <linux/io.h> #define USE_32BIT 0 diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index dbcafa29c775..d1a3dfc9a408 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -482,7 +482,6 @@ static int isp1760_run(struct usb_hcd *hcd) u32 chipid; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; hcd->state = HC_STATE_RUNNING; isp1760_enable_interrupts(hcd); @@ -1450,7 +1449,7 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, epnum = urb->ep->desc.bEndpointAddress; spin_lock_irqsave(&priv->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &priv_to_hcd(priv)->flags)) { + if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) { rc = -ESHUTDOWN; goto done; } diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 8ad2441b0284..36abd2baa3ea 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -645,7 +645,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) hcd->product_desc, hcd_name); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { size -= scnprintf (next, size, "SUSPENDED (no register access)\n"); goto done; @@ -687,7 +687,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) next += temp; temp = scnprintf (next, size, "hub poll timer %s\n", - ohci_to_hcd(ohci)->poll_rh ? "ON" : "off"); + HCD_POLL_RH(ohci_to_hcd(ohci)) ? "ON" : "off"); size -= temp; next += temp; diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 02864a237a2c..c3b4ccc7337b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -212,7 +212,7 @@ static int ohci_urb_enqueue ( spin_lock_irqsave (&ohci->lock, flags); /* don't submit to a dead HC */ - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { retval = -ENODEV; goto fail; } @@ -685,7 +685,7 @@ retry: } /* use rhsc irqs after khubd is fully initialized */ - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); hcd->uses_new_polling = 1; /* start controller operations */ @@ -822,7 +822,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd) else if (ints & OHCI_INTR_RD) { ohci_vdbg(ohci, "resume detect\n"); ohci_writel(ohci, OHCI_INTR_RD, ®s->intrstatus); - hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); if (ohci->autostop) { spin_lock (&ohci->lock); ohci_rh_resume (ohci); diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 65cac8cc8921..cddcda95b579 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -284,7 +284,7 @@ static int ohci_bus_suspend (struct usb_hcd *hcd) spin_lock_irq (&ohci->lock); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) rc = -ESHUTDOWN; else rc = ohci_rh_suspend (ohci, 0); @@ -302,7 +302,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) spin_lock_irq (&ohci->lock); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) rc = -ESHUTDOWN; else rc = ohci_rh_resume (ohci); @@ -355,6 +355,11 @@ static void ohci_finish_controller_resume(struct usb_hcd *hcd) ohci_readl(ohci, &ohci->regs->intrenable); msleep(20); } + + /* Does the root hub have a port wakeup pending? */ + if (ohci_readl(ohci, &ohci->regs->intrstatus) & + (OHCI_INTR_RD | OHCI_INTR_RHSC)) + usb_hcd_resume_root_hub(hcd); } /* Carry out polling-, autostop-, and autoresume-related state changes */ @@ -364,7 +369,7 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed, int poll_rh = 1; int rhsc_enable; - /* Some broken controllers never turn off RHCS in the interrupt + /* Some broken controllers never turn off RHSC in the interrupt * status register. For their sake we won't re-enable RHSC * interrupts if the interrupt bit is already active. */ @@ -489,7 +494,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) unsigned long flags; spin_lock_irqsave (&ohci->lock, flags); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) goto done; /* undocumented erratum seen on at least rev D */ @@ -533,8 +538,12 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf) } } - hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed, - any_connected, rhsc_status); + if (ohci_root_hub_state_changes(ohci, changed, + any_connected, rhsc_status)) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + done: spin_unlock_irqrestore (&ohci->lock, flags); @@ -701,7 +710,7 @@ static int ohci_hub_control ( u32 temp; int retval = 0; - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) return -ESHUTDOWN; switch (typeReq) { diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index b8a1148f248e..6bdc8b25a6a1 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -392,7 +392,7 @@ static int __devinit ohci_pci_start (struct usb_hcd *hcd) #ifdef CONFIG_PM -static int ohci_pci_suspend(struct usb_hcd *hcd) +static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); unsigned long flags; diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c index 23fd6a886bdd..48ee6943bf35 100644 --- a/drivers/usb/host/ohci-ssb.c +++ b/drivers/usb/host/ohci-ssb.c @@ -93,8 +93,11 @@ static void ssb_ohci_detach(struct ssb_device *dev) { struct usb_hcd *hcd = ssb_get_drvdata(dev); + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); usb_remove_hcd(hcd); iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); ssb_device_disable(dev, 0); } @@ -106,10 +109,52 @@ static int ssb_ohci_attach(struct ssb_device *dev) int err = -ENOMEM; u32 tmp, flags = 0; - if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) - flags |= SSB_OHCI_TMSLOW_HOSTMODE; + if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || + dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) + return -EOPNOTSUPP; - ssb_device_enable(dev, flags); + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { + /* Put the device into host-mode. */ + flags |= SSB_OHCI_TMSLOW_HOSTMODE; + ssb_device_enable(dev, flags); + } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { + /* + * USB 2.0 special considerations: + * + * In addition to the standard SSB reset sequence, the Host + * Control Register must be programmed to bring the USB core + * and various phy components out of reset. + */ + ssb_device_enable(dev, 0); + ssb_write32(dev, 0x200, 0x7ff); + + /* Change Flush control reg */ + tmp = ssb_read32(dev, 0x400); + tmp &= ~8; + ssb_write32(dev, 0x400, tmp); + tmp = ssb_read32(dev, 0x400); + + /* Change Shim control reg */ + tmp = ssb_read32(dev, 0x304); + tmp &= ~0x100; + ssb_write32(dev, 0x304, tmp); + tmp = ssb_read32(dev, 0x304); + + udelay(1); + + /* Work around for 5354 failures */ + if (dev->id.revision == 2 && dev->bus->chip_id == 0x5354) { + /* Change syn01 reg */ + tmp = 0x00fe00fe; + ssb_write32(dev, 0x894, tmp); + + /* Change syn03 reg */ + tmp = ssb_read32(dev, 0x89c); + tmp |= 0x1; + ssb_write32(dev, 0x89c, tmp); + } + } else + ssb_device_enable(dev, 0); hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, dev_name(dev->dev)); @@ -200,6 +245,7 @@ static int ssb_ohci_resume(struct ssb_device *dev) static const struct ssb_device_id ssb_ohci_table[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), SSB_DEVTABLE_END }; MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index f608dfd09a8a..d9c85a292737 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -1641,8 +1641,7 @@ static int submit_async(struct oxu_hcd *oxu, struct urb *urb, #endif spin_lock_irqsave(&oxu->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &oxu_to_hcd(oxu)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) { rc = -ESHUTDOWN; goto done; } @@ -2209,8 +2208,7 @@ static int intr_submit(struct oxu_hcd *oxu, struct urb *urb, spin_lock_irqsave(&oxu->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, - &oxu_to_hcd(oxu)->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(oxu_to_hcd(oxu)))) { status = -ESHUTDOWN; goto done; } @@ -2715,7 +2713,6 @@ static int oxu_run(struct usb_hcd *hcd) u32 temp, hcc_params; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; /* EHCI spec section 4.1 */ retval = ehci_reset(oxu); diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index bcf9f0e809de..990f06b89eaa 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -813,8 +813,11 @@ static int sl811h_urb_enqueue( #endif /* avoid all allocations within spinlocks */ - if (!hep->hcpriv) + if (!hep->hcpriv) { ep = kzalloc(sizeof *ep, mem_flags); + if (ep == NULL) + return -ENOMEM; + } spin_lock_irqsave(&sl811->lock, flags); diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 98cf0b26b968..6e7fb5f38db6 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -17,7 +17,6 @@ #include "uhci-hcd.h" -#define uhci_debug_operations (* (const struct file_operations *) NULL) static struct dentry *uhci_debugfs_root; #ifdef DEBUG @@ -495,18 +494,16 @@ static int uhci_debug_open(struct inode *inode, struct file *file) { struct uhci_hcd *uhci = inode->i_private; struct uhci_debug *up; - int ret = -ENOMEM; unsigned long flags; - lock_kernel(); up = kmalloc(sizeof(*up), GFP_KERNEL); if (!up) - goto out; + return -ENOMEM; up->data = kmalloc(MAX_OUTPUT, GFP_KERNEL); if (!up->data) { kfree(up); - goto out; + return -ENOMEM; } up->size = 0; @@ -517,10 +514,7 @@ static int uhci_debug_open(struct inode *inode, struct file *file) file->private_data = up; - ret = 0; -out: - unlock_kernel(); - return ret; + return 0; } static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) @@ -528,9 +522,9 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) struct uhci_debug *up; loff_t new = -1; - lock_kernel(); up = file->private_data; + /* XXX: atomic 64bit seek access, but that needs to be fixed in the VFS */ switch (whence) { case 0: new = off; @@ -539,11 +533,10 @@ static loff_t uhci_debug_lseek(struct file *file, loff_t off, int whence) new = file->f_pos + off; break; } - if (new < 0 || new > up->size) { - unlock_kernel(); + + if (new < 0 || new > up->size) return -EINVAL; - } - unlock_kernel(); + return (file->f_pos = new); } @@ -564,7 +557,6 @@ static int uhci_debug_release(struct inode *inode, struct file *file) return 0; } -#undef uhci_debug_operations static const struct file_operations uhci_debug_operations = { .owner = THIS_MODULE, .open = uhci_debug_open, @@ -572,6 +564,7 @@ static const struct file_operations uhci_debug_operations = { .read = uhci_debug_read, .release = uhci_debug_release, }; +#define UHCI_DEBUG_OPS #endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6637e52736dd..f52d04db28f4 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -140,7 +140,7 @@ static void finish_reset(struct uhci_hcd *uhci) uhci->rh_state = UHCI_RH_RESET; uhci->is_stopped = UHCI_IS_STOPPED; uhci_to_hcd(uhci)->state = HC_STATE_HALT; - uhci_to_hcd(uhci)->poll_rh = 0; + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci->dead = 0; /* Full reset resurrects the controller */ } @@ -176,6 +176,8 @@ static void check_and_reset_hc(struct uhci_hcd *uhci) */ static void configure_hc(struct uhci_hcd *uhci) { + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); + /* Set the frame length to the default: 1 ms exactly */ outb(USBSOF_DEFAULT, uhci->io_addr + USBSOF); @@ -191,8 +193,11 @@ static void configure_hc(struct uhci_hcd *uhci) mb(); /* Enable PIRQ */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, - USBLEGSUP_DEFAULT); + pci_write_config_word(pdev, USBLEGSUP, USBLEGSUP_DEFAULT); + + /* Disable platform-specific non-PME# wakeup */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, 0); } @@ -344,7 +349,10 @@ __acquires(uhci->lock) /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - uhci_to_hcd(uhci)->poll_rh = (!int_enable && wakeup_enable); + if (!int_enable && wakeup_enable) + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); + else + clear_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); uhci_scan_schedule(uhci); uhci_fsbr_off(uhci); @@ -363,7 +371,7 @@ static void start_rh(struct uhci_hcd *uhci) uhci->io_addr + USBINTR); mb(); uhci->rh_state = UHCI_RH_RUNNING; - uhci_to_hcd(uhci)->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &uhci_to_hcd(uhci)->flags); } static void wakeup_rh(struct uhci_hcd *uhci) @@ -589,7 +597,7 @@ static int uhci_start(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); int retval = -EBUSY; int i; - struct dentry *dentry; + struct dentry __maybe_unused *dentry; hcd->uses_new_polling = 1; @@ -599,18 +607,16 @@ static int uhci_start(struct usb_hcd *hcd) INIT_LIST_HEAD(&uhci->idle_qh_list); init_waitqueue_head(&uhci->waitqh); - if (DEBUG_CONFIGURED) { - dentry = debugfs_create_file(hcd->self.bus_name, - S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, - uhci, &uhci_debug_operations); - if (!dentry) { - dev_err(uhci_dev(uhci), "couldn't create uhci " - "debugfs entry\n"); - retval = -ENOMEM; - goto err_create_debug_entry; - } - uhci->dentry = dentry; +#ifdef UHCI_DEBUG_OPS + dentry = debugfs_create_file(hcd->self.bus_name, + S_IFREG|S_IRUGO|S_IWUSR, uhci_debugfs_root, + uhci, &uhci_debug_operations); + if (!dentry) { + dev_err(uhci_dev(uhci), "couldn't create uhci debugfs entry\n"); + return -ENOMEM; } + uhci->dentry = dentry; +#endif uhci->frame = dma_alloc_coherent(uhci_dev(uhci), UHCI_NUMFRAMES * sizeof(*uhci->frame), @@ -691,7 +697,9 @@ static int uhci_start(struct usb_hcd *hcd) configure_hc(uhci); uhci->is_initialized = 1; + spin_lock_irq(&uhci->lock); start_rh(uhci); + spin_unlock_irq(&uhci->lock); return 0; /* @@ -722,7 +730,6 @@ err_alloc_frame_cpu: err_alloc_frame: debugfs_remove(uhci->dentry); -err_create_debug_entry: return retval; } @@ -731,7 +738,7 @@ static void uhci_stop(struct usb_hcd *hcd) struct uhci_hcd *uhci = hcd_to_uhci(hcd); spin_lock_irq(&uhci->lock); - if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) && !uhci->dead) + if (HCD_HW_ACCESSIBLE(hcd) && !uhci->dead) uhci_hc_died(uhci); uhci_scan_schedule(uhci); spin_unlock_irq(&uhci->lock); @@ -748,7 +755,7 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (uhci->dead) ; /* Dead controllers tell no tales */ @@ -775,7 +782,7 @@ static int uhci_rh_resume(struct usb_hcd *hcd) int rc = 0; spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) + if (!HCD_HW_ACCESSIBLE(hcd)) rc = -ESHUTDOWN; else if (!uhci->dead) wakeup_rh(uhci); @@ -783,15 +790,16 @@ static int uhci_rh_resume(struct usb_hcd *hcd) return rc; } -static int uhci_pci_suspend(struct usb_hcd *hcd) +static int uhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct uhci_hcd *uhci = hcd_to_uhci(hcd); + struct pci_dev *pdev = to_pci_dev(uhci_dev(uhci)); int rc = 0; dev_dbg(uhci_dev(uhci), "%s\n", __func__); spin_lock_irq(&uhci->lock); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done_okay; /* Already suspended or dead */ if (uhci->rh_state > UHCI_RH_SUSPENDED) { @@ -803,11 +811,15 @@ static int uhci_pci_suspend(struct usb_hcd *hcd) /* All PCI host controllers are required to disable IRQ generation * at the source, so we must turn off PIRQ. */ - pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0); - mb(); - hcd->poll_rh = 0; - - /* FIXME: Enable non-PME# remote wakeup? */ + pci_write_config_word(pdev, USBLEGSUP, 0); + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Enable platform-specific non-PME# wakeup */ + if (do_wakeup) { + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + pci_write_config_byte(pdev, USBRES_INTEL, + USBPORT1EN | USBPORT2EN); + } done_okay: clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -826,7 +838,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) * even if the controller was dead. */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - mb(); spin_lock_irq(&uhci->lock); @@ -834,8 +845,6 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) if (hibernated) uhci_hc_died(uhci); - /* FIXME: Disable non-PME# remote wakeup? */ - /* The firmware or a boot kernel may have changed the controller * settings during a system wakeup. Check it and reconfigure * to avoid problems. @@ -845,22 +854,20 @@ static int uhci_pci_resume(struct usb_hcd *hcd, bool hibernated) /* If the controller was dead before, it's back alive now */ configure_hc(uhci); - if (uhci->rh_state == UHCI_RH_RESET) { - - /* The controller had to be reset */ + /* Tell the core if the controller had to be reset */ + if (uhci->rh_state == UHCI_RH_RESET) usb_root_hub_lost_power(hcd->self.root_hub); - suspend_rh(uhci, UHCI_RH_SUSPENDED); - } spin_unlock_irq(&uhci->lock); /* If interrupts don't work and remote wakeup is enabled then * the suspended root hub needs to be polled. */ - if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) { - hcd->poll_rh = 1; - usb_hcd_poll_rh_status(hcd); - } + if (!uhci->RD_enable && hcd->self.root_hub->do_remote_wakeup) + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* Does the root hub have a port wakeup pending? */ + usb_hcd_poll_rh_status(hcd); return 0; } #endif diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 26bd1b2bcbfc..49bf2790f9c2 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -67,12 +67,17 @@ #define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */ #define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */ -/* Legacy support register */ +/* PCI legacy support register */ #define USBLEGSUP 0xc0 #define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ +/* PCI Intel-specific resume-enable register */ +#define USBRES_INTEL 0xc4 +#define USBPORT1EN 0x01 +#define USBPORT2EN 0x02 + #define UHCI_PTR_BITS cpu_to_le32(0x000F) #define UHCI_PTR_TERM cpu_to_le32(0x0001) #define UHCI_PTR_QH cpu_to_le32(0x0002) diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 8270055848ca..6d59c0f77f25 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -190,7 +190,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&uhci->lock, flags); uhci_scan_schedule(uhci); - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) goto done; uhci_check_ports(uhci); @@ -200,7 +200,7 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) case UHCI_RH_SUSPENDING: case UHCI_RH_SUSPENDED: /* if port change, ask to be resumed */ - if (status) + if (status || uhci->resuming_ports) usb_hcd_resume_root_hub(hcd); break; @@ -246,7 +246,7 @@ static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wPortChange, wPortStatus; unsigned long flags; - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags) || uhci->dead) + if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) return -ETIMEDOUT; spin_lock_irqsave(&uhci->lock, flags); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index acd582c02802..d3ade4018487 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -565,7 +565,7 @@ static void uhci_unlink_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) qh->unlink_frame = uhci->frame_number; /* Force an interrupt so we know when the QH is fully unlinked */ - if (list_empty(&uhci->skel_unlink_qh->node)) + if (list_empty(&uhci->skel_unlink_qh->node) || uhci->is_stopped) uhci_set_next_interrupt(uhci); /* Move the QH from its old list to the end of the unlinking list */ @@ -1667,7 +1667,7 @@ static int uhci_advance_check(struct uhci_hcd *uhci, struct uhci_qh *qh) qh->advance_jiffies = jiffies; goto done; } - ret = 0; + ret = uhci->is_stopped; } /* The queue hasn't advanced; check for timeout */ diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c index e0d3401285c8..72b6892fda67 100644 --- a/drivers/usb/host/whci/hcd.c +++ b/drivers/usb/host/whci/hcd.c @@ -68,7 +68,7 @@ static int whc_start(struct usb_hcd *usb_hcd) whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); usb_hcd->uses_new_polling = 1; - usb_hcd->poll_rh = 1; + set_bit(HCD_FLAG_POLL_RH, &usb_hcd->flags); usb_hcd->state = HC_STATE_RUNNING; out: diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c index ab5a14fbfeeb..dc0ab8382f5d 100644 --- a/drivers/usb/host/whci/qset.c +++ b/drivers/usb/host/whci/qset.c @@ -475,7 +475,7 @@ static int qset_add_urb_sg(struct whc *whc, struct whc_qset *qset, struct urb *u || (prev_end & (WHCI_PAGE_SIZE-1)) || (dma_addr & (WHCI_PAGE_SIZE-1)) || std->len + WHCI_PAGE_SIZE > QTD_MAX_XFER_SIZE) { - if (std->len % qset->max_packet != 0) + if (std && std->len % qset->max_packet != 0) return -EINVAL; std = qset_new_std(whc, qset, urb, mem_flags); if (std == NULL) { diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2eb658d26394..4e51343ddffc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -391,49 +391,6 @@ struct xhci_ring *xhci_stream_id_to_ring( return ep->stream_info->stream_rings[stream_id]; } -struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - unsigned int stream_id) -{ - struct xhci_virt_ep *ep; - - ep = &xhci->devs[slot_id]->eps[ep_index]; - /* Common case: no streams */ - if (!(ep->ep_state & EP_HAS_STREAMS)) - return ep->ring; - - if (stream_id == 0) { - xhci_warn(xhci, - "WARN: Slot ID %u, ep index %u has streams, " - "but URB has no stream ID.\n", - slot_id, ep_index); - return NULL; - } - - if (stream_id < ep->stream_info->num_streams) - return ep->stream_info->stream_rings[stream_id]; - - xhci_warn(xhci, - "WARN: Slot ID %u, ep index %u has " - "stream IDs 1 to %u allocated, " - "but stream ID %u is requested.\n", - slot_id, ep_index, - ep->stream_info->num_streams - 1, - stream_id); - return NULL; -} - -/* Get the right ring for the given URB. - * If the endpoint supports streams, boundary check the URB's stream ID. - * If the endpoint doesn't support streams, return the singular endpoint ring. - */ -struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, - struct urb *urb) -{ - return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id, - xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id); -} - #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING static int xhci_test_radix_tree(struct xhci_hcd *xhci, unsigned int num_streams, @@ -1112,8 +1069,18 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); /* Set up the endpoint ring */ - virt_dev->eps[ep_index].new_ring = - xhci_ring_alloc(xhci, 1, true, mem_flags); + /* + * Isochronous endpoint ring needs bigger size because one isoc URB + * carries multiple packets and it will insert multiple tds to the + * ring. + * This should be replaced with dynamic ring resizing in the future. + */ + if (usb_endpoint_xfer_isoc(&ep->desc)) + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 8, true, mem_flags); + else + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 1, true, mem_flags); if (!virt_dev->eps[ep_index].new_ring) { /* Attempt to use the ring cache */ if (virt_dev->num_rings_cached == 0) @@ -1124,6 +1091,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, virt_dev->num_rings_cached--; xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring); } + virt_dev->eps[ep_index].skip = false; ep_ring = virt_dev->eps[ep_index].new_ring; ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state; @@ -1389,6 +1357,22 @@ struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, return command; } +void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv) +{ + int last; + + if (!urb_priv) + return; + + last = urb_priv->length - 1; + if (last >= 0) { + int i; + for (i = 0; i <= last; i++) + kfree(urb_priv->td[i]); + } + kfree(urb_priv); +} + void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command) { @@ -1588,7 +1572,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) unsigned int num_tests; int i, ret; - num_tests = sizeof(simple_test_vector) / sizeof(simple_test_vector[0]); + num_tests = ARRAY_SIZE(simple_test_vector); for (i = 0; i < num_tests; i++) { ret = xhci_test_trb_in_td(xhci, xhci->event_ring->first_seg, @@ -1601,7 +1585,7 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) return ret; } - num_tests = sizeof(complex_test_vector) / sizeof(complex_test_vector[0]); + num_tests = ARRAY_SIZE(complex_test_vector); for (i = 0; i < num_tests; i++) { ret = xhci_test_trb_in_td(xhci, complex_test_vector[i].input_seg, @@ -1617,6 +1601,29 @@ static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci, gfp_t mem_flags) return 0; } +static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) +{ + u64 temp; + dma_addr_t deq; + + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0 && !in_interrupt()) + xhci_warn(xhci, "WARN something wrong with SW event ring " + "dequeue ptr.\n"); + /* Update HC event ring dequeue pointer */ + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp &= ERST_PTR_MASK; + /* Don't clear the EHB bit (which is RW1C) because + * there might be more events to service. + */ + temp &= ~ERST_EHB; + xhci_dbg(xhci, "// Write event ring dequeue pointer, " + "preserving EHB bit\n"); + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + &xhci->ir_set->erst_dequeue); +} + int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) { diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 11482b6b9381..f7efe025beda 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -53,6 +53,7 @@ static int xhci_pci_setup(struct usb_hcd *hcd) struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval; + u32 temp; hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; @@ -93,6 +94,14 @@ static int xhci_pci_setup(struct usb_hcd *hcd) return retval; xhci_dbg(xhci, "Reset complete\n"); + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + xhci_dbg(xhci, "Calling HCD init\n"); /* Initialize HCD and host controller data structures. */ retval = xhci_init(hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bfc99a939455..bc3f4f427065 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -301,28 +301,6 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, return 1; } -void xhci_set_hc_event_deq(struct xhci_hcd *xhci) -{ - u64 temp; - dma_addr_t deq; - - deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, - xhci->event_ring->dequeue); - if (deq == 0 && !in_interrupt()) - xhci_warn(xhci, "WARN something wrong with SW event ring " - "dequeue ptr.\n"); - /* Update HC event ring dequeue pointer */ - temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - temp &= ERST_PTR_MASK; - /* Don't clear the EHB bit (which is RW1C) because - * there might be more events to service. - */ - temp &= ~ERST_EHB; - xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n"); - xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, - &xhci->ir_set->erst_dequeue); -} - /* Ring the host controller doorbell after placing a command on the ring */ void xhci_ring_cmd_db(struct xhci_hcd *xhci) { @@ -359,11 +337,6 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci, field = xhci_readl(xhci, db_addr) & DB_MASK; field |= EPI_TO_DB(ep_index) | STREAM_ID_TO_DB(stream_id); xhci_writel(xhci, field, db_addr); - /* Flush PCI posted writes - FIXME Matthew Wilcox says this - * isn't time-critical and we shouldn't make the CPU wait for - * the flush. - */ - xhci_readl(xhci, db_addr); } } @@ -419,6 +392,50 @@ static struct xhci_segment *find_trb_seg( return cur_seg; } + +static struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, + unsigned int slot_id, unsigned int ep_index, + unsigned int stream_id) +{ + struct xhci_virt_ep *ep; + + ep = &xhci->devs[slot_id]->eps[ep_index]; + /* Common case: no streams */ + if (!(ep->ep_state & EP_HAS_STREAMS)) + return ep->ring; + + if (stream_id == 0) { + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has streams, " + "but URB has no stream ID.\n", + slot_id, ep_index); + return NULL; + } + + if (stream_id < ep->stream_info->num_streams) + return ep->stream_info->stream_rings[stream_id]; + + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has " + "stream IDs 1 to %u allocated, " + "but stream ID %u is requested.\n", + slot_id, ep_index, + ep->stream_info->num_streams - 1, + stream_id); + return NULL; +} + +/* Get the right ring for the given URB. + * If the endpoint supports streams, boundary check the URB's stream ID. + * If the endpoint doesn't support streams, return the singular endpoint ring. + */ +static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, + struct urb *urb) +{ + return xhci_triad_to_transfer_ring(xhci, urb->dev->slot_id, + xhci_get_endpoint_index(&urb->ep->desc), urb->stream_id); +} + /* * Move the xHC's endpoint ring dequeue pointer past cur_td. * Record the new state of the xHC's endpoint ring dequeue segment, @@ -578,16 +595,24 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, struct xhci_td *cur_td, int status, char *adjective) { struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct urb *urb; + struct urb_priv *urb_priv; - cur_td->urb->hcpriv = NULL; - usb_hcd_unlink_urb_from_ep(hcd, cur_td->urb); - xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, cur_td->urb); + urb = cur_td->urb; + urb_priv = urb->hcpriv; + urb_priv->td_cnt++; - spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(hcd, cur_td->urb, status); - kfree(cur_td); - spin_lock(&xhci->lock); - xhci_dbg(xhci, "%s URB given back\n", adjective); + /* Only giveback urb when this is the last td in urb */ + if (urb_priv->td_cnt == urb_priv->length) { + usb_hcd_unlink_urb_from_ep(hcd, urb); + xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); + + spin_unlock(&xhci->lock); + usb_hcd_giveback_urb(hcd, urb, status); + xhci_urb_free_priv(xhci, urb_priv); + spin_lock(&xhci->lock); + xhci_dbg(xhci, "%s URB given back\n", adjective); + } } /* @@ -1132,7 +1157,6 @@ static void handle_port_status(struct xhci_hcd *xhci, /* Update event ring dequeue pointer before dropping the lock */ inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); spin_unlock(&xhci->lock); /* Pass this up to the core */ @@ -1258,6 +1282,421 @@ int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code) } /* + * Finish the td processing, remove the td from td list; + * Return 1 if the urb can be given back. + */ +static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status, bool skip) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + unsigned int slot_id; + int ep_index; + struct urb *urb = NULL; + struct xhci_ep_ctx *ep_ctx; + int ret = 0; + struct urb_priv *urb_priv; + u32 trb_comp_code; + + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; + ep_index = TRB_TO_EP_ID(event->flags) - 1; + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + if (skip) + goto td_cleanup; + + if (trb_comp_code == COMP_STOP_INVAL || + trb_comp_code == COMP_STOP) { + /* The Endpoint Stop Command completion will take care of any + * stopped TDs. A stopped TD may be restarted, so don't update + * the ring dequeue pointer or take this TD off any lists yet. + */ + ep->stopped_td = td; + ep->stopped_trb = event_trb; + return 0; + } else { + if (trb_comp_code == COMP_STALL) { + /* The transfer is completed from the driver's + * perspective, but we need to issue a set dequeue + * command for this stalled endpoint to move the dequeue + * pointer past the TD. We can't do that here because + * the halt condition must be cleared first. Let the + * USB class driver clear the stall later. + */ + ep->stopped_td = td; + ep->stopped_trb = event_trb; + ep->stopped_stream = ep_ring->stream_id; + } else if (xhci_requires_manual_halt_cleanup(xhci, + ep_ctx, trb_comp_code)) { + /* Other types of errors halt the endpoint, but the + * class driver doesn't call usb_reset_endpoint() unless + * the error is -EPIPE. Clear the halted status in the + * xHCI hardware manually. + */ + xhci_cleanup_halted_endpoint(xhci, + slot_id, ep_index, ep_ring->stream_id, + td, event_trb); + } else { + /* Update ring dequeue pointer */ + while (ep_ring->dequeue != td->last_trb) + inc_deq(xhci, ep_ring, false); + inc_deq(xhci, ep_ring, false); + } + +td_cleanup: + /* Clean up the endpoint's TD list */ + urb = td->urb; + urb_priv = urb->hcpriv; + + /* Do one last check of the actual transfer length. + * If the host controller said we transferred more data than + * the buffer length, urb->actual_length will be a very big + * number (since it's unsigned). Play it safe and say we didn't + * transfer anything. + */ + if (urb->actual_length > urb->transfer_buffer_length) { + xhci_warn(xhci, "URB transfer length is wrong, " + "xHC issue? req. len = %u, " + "act. len = %u\n", + urb->transfer_buffer_length, + urb->actual_length); + urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + list_del(&td->td_list); + /* Was this TD slated to be cancelled but completed anyway? */ + if (!list_empty(&td->cancelled_td_list)) + list_del(&td->cancelled_td_list); + + urb_priv->td_cnt++; + /* Giveback the urb when all the tds are completed */ + if (urb_priv->td_cnt == urb_priv->length) + ret = 1; + } + + return ret; +} + +/* + * Process control tds, update urb status and actual_length. + */ +static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + unsigned int slot_id; + int ep_index; + struct xhci_ep_ctx *ep_ctx; + u32 trb_comp_code; + + slot_id = TRB_TO_SLOT_ID(event->flags); + xdev = xhci->devs[slot_id]; + ep_index = TRB_TO_EP_ID(event->flags) - 1; + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + xhci_debug_trb(xhci, xhci->event_ring->dequeue); + switch (trb_comp_code) { + case COMP_SUCCESS: + if (event_trb == ep_ring->dequeue) { + xhci_warn(xhci, "WARN: Success on ctrl setup TRB " + "without IOC set??\n"); + *status = -ESHUTDOWN; + } else if (event_trb != td->last_trb) { + xhci_warn(xhci, "WARN: Success on ctrl data TRB " + "without IOC set??\n"); + *status = -ESHUTDOWN; + } else { + xhci_dbg(xhci, "Successful control transfer!\n"); + *status = 0; + } + break; + case COMP_SHORT_TX: + xhci_warn(xhci, "WARN: short transfer on control ep\n"); + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + break; + default: + if (!xhci_requires_manual_halt_cleanup(xhci, + ep_ctx, trb_comp_code)) + break; + xhci_dbg(xhci, "TRB error code %u, " + "halted endpoint index = %u\n", + trb_comp_code, ep_index); + /* else fall through */ + case COMP_STALL: + /* Did we transfer part of the data (middle) phase? */ + if (event_trb != ep_ring->dequeue && + event_trb != td->last_trb) + td->urb->actual_length = + td->urb->transfer_buffer_length + - TRB_LEN(event->transfer_len); + else + td->urb->actual_length = 0; + + xhci_cleanup_halted_endpoint(xhci, + slot_id, ep_index, 0, td, event_trb); + return finish_td(xhci, td, event_trb, event, ep, status, true); + } + /* + * Did we transfer any data, despite the errors that might have + * happened? I.e. did we get past the setup stage? + */ + if (event_trb != ep_ring->dequeue) { + /* The event was for the status stage */ + if (event_trb == td->last_trb) { + if (td->urb->actual_length != 0) { + /* Don't overwrite a previously set error code + */ + if ((*status == -EINPROGRESS || *status == 0) && + (td->urb->transfer_flags + & URB_SHORT_NOT_OK)) + /* Did we already see a short data + * stage? */ + *status = -EREMOTEIO; + } else { + td->urb->actual_length = + td->urb->transfer_buffer_length; + } + } else { + /* Maybe the event was for the data stage? */ + if (trb_comp_code != COMP_STOP_INVAL) { + /* We didn't stop on a link TRB in the middle */ + td->urb->actual_length = + td->urb->transfer_buffer_length - + TRB_LEN(event->transfer_len); + xhci_dbg(xhci, "Waiting for status " + "stage event\n"); + return 0; + } + } + } + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* + * Process isochronous tds, update urb packet status and actual_length. + */ +static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; + int idx; + int len = 0; + int skip_td = 0; + union xhci_trb *cur_trb; + struct xhci_segment *cur_seg; + u32 trb_comp_code; + + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + urb_priv = td->urb->hcpriv; + idx = urb_priv->td_cnt; + + if (ep->skip) { + /* The transfer is partly done */ + *status = -EXDEV; + td->urb->iso_frame_desc[idx].status = -EXDEV; + } else { + /* handle completion code */ + switch (trb_comp_code) { + case COMP_SUCCESS: + td->urb->iso_frame_desc[idx].status = 0; + xhci_dbg(xhci, "Successful isoc transfer!\n"); + break; + case COMP_SHORT_TX: + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + td->urb->iso_frame_desc[idx].status = + -EREMOTEIO; + else + td->urb->iso_frame_desc[idx].status = 0; + break; + case COMP_BW_OVER: + td->urb->iso_frame_desc[idx].status = -ECOMM; + skip_td = 1; + break; + case COMP_BUFF_OVER: + case COMP_BABBLE: + td->urb->iso_frame_desc[idx].status = -EOVERFLOW; + skip_td = 1; + break; + case COMP_STALL: + td->urb->iso_frame_desc[idx].status = -EPROTO; + skip_td = 1; + break; + case COMP_STOP: + case COMP_STOP_INVAL: + break; + default: + td->urb->iso_frame_desc[idx].status = -1; + break; + } + } + + /* calc actual length */ + if (ep->skip) { + td->urb->iso_frame_desc[idx].actual_length = 0; + return finish_td(xhci, td, event_trb, event, ep, status, true); + } + + if (trb_comp_code == COMP_SUCCESS || skip_td == 1) { + td->urb->iso_frame_desc[idx].actual_length = + td->urb->iso_frame_desc[idx].length; + td->urb->actual_length += + td->urb->iso_frame_desc[idx].length; + } else { + for (cur_trb = ep_ring->dequeue, + cur_seg = ep_ring->deq_seg; cur_trb != event_trb; + next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { + if ((cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && + (cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) + len += + TRB_LEN(cur_trb->generic.field[2]); + } + len += TRB_LEN(cur_trb->generic.field[2]) - + TRB_LEN(event->transfer_len); + + if (trb_comp_code != COMP_STOP_INVAL) { + td->urb->iso_frame_desc[idx].actual_length = len; + td->urb->actual_length += len; + } + } + + if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS) + *status = 0; + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* + * Process bulk and interrupt tds, update urb status and actual_length. + */ +static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, + union xhci_trb *event_trb, struct xhci_transfer_event *event, + struct xhci_virt_ep *ep, int *status) +{ + struct xhci_ring *ep_ring; + union xhci_trb *cur_trb; + struct xhci_segment *cur_seg; + u32 trb_comp_code; + + ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + trb_comp_code = GET_COMP_CODE(event->transfer_len); + + switch (trb_comp_code) { + case COMP_SUCCESS: + /* Double check that the HW transferred everything. */ + if (event_trb != td->last_trb) { + xhci_warn(xhci, "WARN Successful completion " + "on short TX\n"); + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } else { + if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) + xhci_dbg(xhci, "Successful bulk " + "transfer!\n"); + else + xhci_dbg(xhci, "Successful interrupt " + "transfer!\n"); + *status = 0; + } + break; + case COMP_SHORT_TX: + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + break; + default: + /* Others already handled above */ + break; + } + dev_dbg(&td->urb->dev->dev, + "ep %#x - asked for %d bytes, " + "%d bytes untransferred\n", + td->urb->ep->desc.bEndpointAddress, + td->urb->transfer_buffer_length, + TRB_LEN(event->transfer_len)); + /* Fast path - was this the last TRB in the TD for this URB? */ + if (event_trb == td->last_trb) { + if (TRB_LEN(event->transfer_len) != 0) { + td->urb->actual_length = + td->urb->transfer_buffer_length - + TRB_LEN(event->transfer_len); + if (td->urb->transfer_buffer_length < + td->urb->actual_length) { + xhci_warn(xhci, "HC gave bad length " + "of %d bytes left\n", + TRB_LEN(event->transfer_len)); + td->urb->actual_length = 0; + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + /* Don't overwrite a previously set error code */ + if (*status == -EINPROGRESS) { + if (td->urb->transfer_flags & URB_SHORT_NOT_OK) + *status = -EREMOTEIO; + else + *status = 0; + } + } else { + td->urb->actual_length = + td->urb->transfer_buffer_length; + /* Ignore a short packet completion if the + * untransferred length was zero. + */ + if (*status == -EREMOTEIO) + *status = 0; + } + } else { + /* Slow path - walk the list, starting from the dequeue + * pointer, to get the actual length transferred. + */ + td->urb->actual_length = 0; + for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; + cur_trb != event_trb; + next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { + if ((cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && + (cur_trb->generic.field[3] & + TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) + td->urb->actual_length += + TRB_LEN(cur_trb->generic.field[2]); + } + /* If the ring didn't stop on a Link or No-op TRB, add + * in the actual bytes transferred from the Normal TRB + */ + if (trb_comp_code != COMP_STOP_INVAL) + td->urb->actual_length += + TRB_LEN(cur_trb->generic.field[2]) - + TRB_LEN(event->transfer_len); + } + + return finish_td(xhci, td, event_trb, event, ep, status, false); +} + +/* * If this function returns an error condition, it means it got a Transfer * event with a corrupted Slot ID, Endpoint ID, or TRB DMA address. * At this point, the host controller is probably hosed and should be reset. @@ -1276,10 +1715,11 @@ static int handle_tx_event(struct xhci_hcd *xhci, union xhci_trb *event_trb; struct urb *urb = NULL; int status = -EINPROGRESS; + struct urb_priv *urb_priv; struct xhci_ep_ctx *ep_ctx; u32 trb_comp_code; + int ret = 0; - xhci_dbg(xhci, "In %s\n", __func__); slot_id = TRB_TO_SLOT_ID(event->flags); xdev = xhci->devs[slot_id]; if (!xdev) { @@ -1293,51 +1733,16 @@ static int handle_tx_event(struct xhci_hcd *xhci, ep = &xdev->eps[ep_index]; ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); - if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { + if (!ep_ring || + (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) { xhci_err(xhci, "ERROR Transfer event for disabled endpoint " "or incorrect stream ring\n"); return -ENODEV; } event_dma = event->buffer; - /* This TRB should be in the TD at the head of this ring's TD list */ - xhci_dbg(xhci, "%s - checking for list empty\n", __func__); - if (list_empty(&ep_ring->td_list)) { - xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n", - TRB_TO_SLOT_ID(event->flags), ep_index); - xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", - (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); - xhci_print_trb_offsets(xhci, (union xhci_trb *) event); - urb = NULL; - goto cleanup; - } - xhci_dbg(xhci, "%s - getting list entry\n", __func__); - td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); - - /* Is this a TRB in the currently executing TD? */ - xhci_dbg(xhci, "%s - looking for TD\n", __func__); - event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, - td->last_trb, event_dma); - xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg); - if (!event_seg) { - /* HC is busted, give up! */ - xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n"); - return -ESHUTDOWN; - } - event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)]; - xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", - (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); - xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n", - lower_32_bits(event->buffer)); - xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n", - upper_32_bits(event->buffer)); - xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n", - (unsigned int) event->transfer_len); - xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n", - (unsigned int) event->flags); - - /* Look for common error cases */ trb_comp_code = GET_COMP_CODE(event->transfer_len); + /* Look for common error cases */ switch (trb_comp_code) { /* Skip codes that require special handling depending on * transfer type @@ -1373,278 +1778,156 @@ static int handle_tx_event(struct xhci_hcd *xhci, xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n"); status = -ENOSR; break; + case COMP_BW_OVER: + xhci_warn(xhci, "WARN: bandwidth overrun event on endpoint\n"); + break; + case COMP_BUFF_OVER: + xhci_warn(xhci, "WARN: buffer overrun event on endpoint\n"); + break; + case COMP_UNDERRUN: + /* + * When the Isoch ring is empty, the xHC will generate + * a Ring Overrun Event for IN Isoch endpoint or Ring + * Underrun Event for OUT Isoch endpoint. + */ + xhci_dbg(xhci, "underrun event on endpoint\n"); + if (!list_empty(&ep_ring->td_list)) + xhci_dbg(xhci, "Underrun Event for slot %d ep %d " + "still with TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + goto cleanup; + case COMP_OVERRUN: + xhci_dbg(xhci, "overrun event on endpoint\n"); + if (!list_empty(&ep_ring->td_list)) + xhci_dbg(xhci, "Overrun Event for slot %d ep %d " + "still with TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + goto cleanup; + case COMP_MISSED_INT: + /* + * When encounter missed service error, one or more isoc tds + * may be missed by xHC. + * Set skip flag of the ep_ring; Complete the missed tds as + * short transfer when process the ep_ring next time. + */ + ep->skip = true; + xhci_dbg(xhci, "Miss service interval error, set skip flag\n"); + goto cleanup; default: if (xhci_is_vendor_info_code(xhci, trb_comp_code)) { status = 0; break; } - xhci_warn(xhci, "ERROR Unknown event condition, HC probably busted\n"); - urb = NULL; + xhci_warn(xhci, "ERROR Unknown event condition, HC probably " + "busted\n"); goto cleanup; } - /* Now update the urb's actual_length and give back to the core */ - /* Was this a control transfer? */ - if (usb_endpoint_xfer_control(&td->urb->ep->desc)) { - xhci_debug_trb(xhci, xhci->event_ring->dequeue); - switch (trb_comp_code) { - case COMP_SUCCESS: - if (event_trb == ep_ring->dequeue) { - xhci_warn(xhci, "WARN: Success on ctrl setup TRB without IOC set??\n"); - status = -ESHUTDOWN; - } else if (event_trb != td->last_trb) { - xhci_warn(xhci, "WARN: Success on ctrl data TRB without IOC set??\n"); - status = -ESHUTDOWN; - } else { - xhci_dbg(xhci, "Successful control transfer!\n"); - status = 0; - } - break; - case COMP_SHORT_TX: - xhci_warn(xhci, "WARN: short transfer on control ep\n"); - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - break; - default: - if (!xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) - break; - xhci_dbg(xhci, "TRB error code %u, " - "halted endpoint index = %u\n", - trb_comp_code, ep_index); - /* else fall through */ - case COMP_STALL: - /* Did we transfer part of the data (middle) phase? */ - if (event_trb != ep_ring->dequeue && - event_trb != td->last_trb) - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - else - td->urb->actual_length = 0; - - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, 0, td, event_trb); - goto td_cleanup; - } - /* - * Did we transfer any data, despite the errors that might have - * happened? I.e. did we get past the setup stage? + do { + /* This TRB should be in the TD at the head of this ring's + * TD list. */ - if (event_trb != ep_ring->dequeue) { - /* The event was for the status stage */ - if (event_trb == td->last_trb) { - if (td->urb->actual_length != 0) { - /* Don't overwrite a previously set error code */ - if ((status == -EINPROGRESS || - status == 0) && - (td->urb->transfer_flags - & URB_SHORT_NOT_OK)) - /* Did we already see a short data stage? */ - status = -EREMOTEIO; - } else { - td->urb->actual_length = - td->urb->transfer_buffer_length; - } - } else { - /* Maybe the event was for the data stage? */ - if (trb_comp_code != COMP_STOP_INVAL) { - /* We didn't stop on a link TRB in the middle */ - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - xhci_dbg(xhci, "Waiting for status stage event\n"); - urb = NULL; - goto cleanup; - } + if (list_empty(&ep_ring->td_list)) { + xhci_warn(xhci, "WARN Event TRB for slot %d ep %d " + "with no TDs queued?\n", + TRB_TO_SLOT_ID(event->flags), ep_index); + xhci_dbg(xhci, "Event TRB with TRB type ID %u\n", + (unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10); + xhci_print_trb_offsets(xhci, (union xhci_trb *) event); + if (ep->skip) { + ep->skip = false; + xhci_dbg(xhci, "td_list is empty while skip " + "flag set. Clear skip flag.\n"); } + ret = 0; + goto cleanup; } - } else { - switch (trb_comp_code) { - case COMP_SUCCESS: - /* Double check that the HW transferred everything. */ - if (event_trb != td->last_trb) { - xhci_warn(xhci, "WARN Successful completion " - "on short TX\n"); - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } else { - if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) - xhci_dbg(xhci, "Successful bulk " - "transfer!\n"); - else - xhci_dbg(xhci, "Successful interrupt " - "transfer!\n"); - status = 0; - } - break; - case COMP_SHORT_TX: - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - break; - default: - /* Others already handled above */ - break; + + td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + /* Is this a TRB in the currently executing TD? */ + event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, + td->last_trb, event_dma); + if (event_seg && ep->skip) { + xhci_dbg(xhci, "Found td. Clear skip flag.\n"); + ep->skip = false; + } + if (!event_seg && + (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc))) { + /* HC is busted, give up! */ + xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " + "part of current TD\n"); + return -ESHUTDOWN; } - dev_dbg(&td->urb->dev->dev, - "ep %#x - asked for %d bytes, " - "%d bytes untransferred\n", - td->urb->ep->desc.bEndpointAddress, - td->urb->transfer_buffer_length, - TRB_LEN(event->transfer_len)); - /* Fast path - was this the last TRB in the TD for this URB? */ - if (event_trb == td->last_trb) { - if (TRB_LEN(event->transfer_len) != 0) { - td->urb->actual_length = - td->urb->transfer_buffer_length - - TRB_LEN(event->transfer_len); - if (td->urb->transfer_buffer_length < - td->urb->actual_length) { - xhci_warn(xhci, "HC gave bad length " - "of %d bytes left\n", - TRB_LEN(event->transfer_len)); - td->urb->actual_length = 0; - if (td->urb->transfer_flags & - URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } - /* Don't overwrite a previously set error code */ - if (status == -EINPROGRESS) { - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; - } - } else { - td->urb->actual_length = td->urb->transfer_buffer_length; - /* Ignore a short packet completion if the - * untransferred length was zero. - */ - if (status == -EREMOTEIO) - status = 0; - } - } else { - /* Slow path - walk the list, starting from the dequeue - * pointer, to get the actual length transferred. - */ - union xhci_trb *cur_trb; - struct xhci_segment *cur_seg; - td->urb->actual_length = 0; - for (cur_trb = ep_ring->dequeue, cur_seg = ep_ring->deq_seg; - cur_trb != event_trb; - next_trb(xhci, ep_ring, &cur_seg, &cur_trb)) { - if ((cur_trb->generic.field[3] & - TRB_TYPE_BITMASK) != TRB_TYPE(TRB_TR_NOOP) && - (cur_trb->generic.field[3] & - TRB_TYPE_BITMASK) != TRB_TYPE(TRB_LINK)) - td->urb->actual_length += - TRB_LEN(cur_trb->generic.field[2]); - } - /* If the ring didn't stop on a Link or No-op TRB, add - * in the actual bytes transferred from the Normal TRB + if (event_seg) { + event_trb = &event_seg->trbs[(event_dma - + event_seg->dma) / sizeof(*event_trb)]; + /* + * No-op TRB should not trigger interrupts. + * If event_trb is a no-op TRB, it means the + * corresponding TD has been cancelled. Just ignore + * the TD. */ - if (trb_comp_code != COMP_STOP_INVAL) - td->urb->actual_length += - TRB_LEN(cur_trb->generic.field[2]) - - TRB_LEN(event->transfer_len); + if ((event_trb->generic.field[3] & TRB_TYPE_BITMASK) + == TRB_TYPE(TRB_TR_NOOP)) { + xhci_dbg(xhci, "event_trb is a no-op TRB. " + "Skip it\n"); + goto cleanup; + } } - } - if (trb_comp_code == COMP_STOP_INVAL || - trb_comp_code == COMP_STOP) { - /* The Endpoint Stop Command completion will take care of any - * stopped TDs. A stopped TD may be restarted, so don't update - * the ring dequeue pointer or take this TD off any lists yet. + + /* Now update the urb's actual_length and give back to + * the core */ - ep->stopped_td = td; - ep->stopped_trb = event_trb; - } else { - if (trb_comp_code == COMP_STALL) { - /* The transfer is completed from the driver's - * perspective, but we need to issue a set dequeue - * command for this stalled endpoint to move the dequeue - * pointer past the TD. We can't do that here because - * the halt condition must be cleared first. Let the - * USB class driver clear the stall later. - */ - ep->stopped_td = td; - ep->stopped_trb = event_trb; - ep->stopped_stream = ep_ring->stream_id; - } else if (xhci_requires_manual_halt_cleanup(xhci, - ep_ctx, trb_comp_code)) { - /* Other types of errors halt the endpoint, but the - * class driver doesn't call usb_reset_endpoint() unless - * the error is -EPIPE. Clear the halted status in the - * xHCI hardware manually. - */ - xhci_cleanup_halted_endpoint(xhci, - slot_id, ep_index, ep_ring->stream_id, td, event_trb); - } else { - /* Update ring dequeue pointer */ - while (ep_ring->dequeue != td->last_trb) - inc_deq(xhci, ep_ring, false); - inc_deq(xhci, ep_ring, false); - } + if (usb_endpoint_xfer_control(&td->urb->ep->desc)) + ret = process_ctrl_td(xhci, td, event_trb, event, ep, + &status); + else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc)) + ret = process_isoc_td(xhci, td, event_trb, event, ep, + &status); + else + ret = process_bulk_intr_td(xhci, td, event_trb, event, + ep, &status); -td_cleanup: - /* Clean up the endpoint's TD list */ - urb = td->urb; - /* Do one last check of the actual transfer length. - * If the host controller said we transferred more data than - * the buffer length, urb->actual_length will be a very big - * number (since it's unsigned). Play it safe and say we didn't - * transfer anything. +cleanup: + /* + * Do not update event ring dequeue pointer if ep->skip is set. + * Will roll back to continue process missed tds. */ - if (urb->actual_length > urb->transfer_buffer_length) { - xhci_warn(xhci, "URB transfer length is wrong, " - "xHC issue? req. len = %u, " - "act. len = %u\n", - urb->transfer_buffer_length, - urb->actual_length); - urb->actual_length = 0; - if (td->urb->transfer_flags & URB_SHORT_NOT_OK) - status = -EREMOTEIO; - else - status = 0; + if (trb_comp_code == COMP_MISSED_INT || !ep->skip) { + inc_deq(xhci, xhci->event_ring, true); } - list_del(&td->td_list); - /* Was this TD slated to be cancelled but completed anyway? */ - if (!list_empty(&td->cancelled_td_list)) - list_del(&td->cancelled_td_list); - /* Leave the TD around for the reset endpoint function to use - * (but only if it's not a control endpoint, since we already - * queued the Set TR dequeue pointer command for stalled - * control endpoints). - */ - if (usb_endpoint_xfer_control(&urb->ep->desc) || - (trb_comp_code != COMP_STALL && - trb_comp_code != COMP_BABBLE)) { - kfree(td); + if (ret) { + urb = td->urb; + urb_priv = urb->hcpriv; + /* Leave the TD around for the reset endpoint function + * to use(but only if it's not a control endpoint, + * since we already queued the Set TR dequeue pointer + * command for stalled control endpoints). + */ + if (usb_endpoint_xfer_control(&urb->ep->desc) || + (trb_comp_code != COMP_STALL && + trb_comp_code != COMP_BABBLE)) + xhci_urb_free_priv(xhci, urb_priv); + + usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); + xhci_dbg(xhci, "Giveback URB %p, len = %d, " + "status = %d\n", + urb, urb->actual_length, status); + spin_unlock(&xhci->lock); + usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); + spin_lock(&xhci->lock); } - urb->hcpriv = NULL; - } -cleanup: - inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); - /* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */ - if (urb) { - usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); - xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n", - urb, urb->actual_length, status); - spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); - spin_lock(&xhci->lock); - } + /* + * If ep->skip is set, it means there are missed tds on the + * endpoint ring need to take care of. + * Process them as short transfer until reach the td pointed by + * the event. + */ + } while (ep->skip && trb_comp_code != COMP_MISSED_INT); + return 0; } @@ -1652,7 +1935,7 @@ cleanup: * This function handles all OS-owned events on the event ring. It may drop * xhci->lock between event processing (e.g. to pass up port status changes). */ -void xhci_handle_event(struct xhci_hcd *xhci) +static void xhci_handle_event(struct xhci_hcd *xhci) { union xhci_trb *event; int update_ptrs = 1; @@ -1710,15 +1993,130 @@ void xhci_handle_event(struct xhci_hcd *xhci) return; } - if (update_ptrs) { - /* Update SW and HC event ring dequeue pointer */ + if (update_ptrs) + /* Update SW event ring dequeue pointer */ inc_deq(xhci, xhci->event_ring, true); - xhci_set_hc_event_deq(xhci); - } + /* Are there more items on the event ring? */ xhci_handle_event(xhci); } +/* + * xHCI spec says we can get an interrupt, and if the HC has an error condition, + * we might get bad data out of the event ring. Section 4.10.2.7 has a list of + * indicators of an event TRB error, but we check the status *first* to be safe. + */ +irqreturn_t xhci_irq(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + u32 status; + union xhci_trb *trb; + u64 temp_64; + union xhci_trb *event_ring_deq; + dma_addr_t deq; + + spin_lock(&xhci->lock); + trb = xhci->event_ring->dequeue; + /* Check if the xHC generated the interrupt, or the irq is shared */ + status = xhci_readl(xhci, &xhci->op_regs->status); + if (status == 0xffffffff) + goto hw_died; + + if (!(status & STS_EINT)) { + spin_unlock(&xhci->lock); + xhci_warn(xhci, "Spurious interrupt.\n"); + return IRQ_NONE; + } + xhci_dbg(xhci, "op reg status = %08x\n", status); + xhci_dbg(xhci, "Event ring dequeue ptr:\n"); + xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", + (unsigned long long) + xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), + lower_32_bits(trb->link.segment_ptr), + upper_32_bits(trb->link.segment_ptr), + (unsigned int) trb->link.intr_target, + (unsigned int) trb->link.control); + + if (status & STS_FATAL) { + xhci_warn(xhci, "WARNING: Host System Error\n"); + xhci_halt(xhci); +hw_died: + xhci_to_hcd(xhci)->state = HC_STATE_HALT; + spin_unlock(&xhci->lock); + return -ESHUTDOWN; + } + + /* + * Clear the op reg interrupt status first, + * so we can receive interrupts from other MSI-X interrupters. + * Write 1 to clear the interrupt status. + */ + status |= STS_EINT; + xhci_writel(xhci, status, &xhci->op_regs->status); + /* FIXME when MSI-X is supported and there are multiple vectors */ + /* Clear the MSI-X event interrupt status */ + + if (hcd->irq != -1) { + u32 irq_pending; + /* Acknowledge the PCI interrupt */ + irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending); + irq_pending |= 0x3; + xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending); + } + + if (xhci->xhc_state & XHCI_STATE_DYING) { + xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " + "Shouldn't IRQs be disabled?\n"); + /* Clear the event handler busy flag (RW1C); + * the event ring should be empty. + */ + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, + &xhci->ir_set->erst_dequeue); + spin_unlock(&xhci->lock); + + return IRQ_HANDLED; + } + + event_ring_deq = xhci->event_ring->dequeue; + /* FIXME this should be a delayed service routine + * that clears the EHB. + */ + xhci_handle_event(xhci); + + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + /* If necessary, update the HW's version of the event ring deq ptr. */ + if (event_ring_deq != xhci->event_ring->dequeue) { + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0) + xhci_warn(xhci, "WARN something wrong with SW event " + "ring dequeue ptr.\n"); + /* Update HC event ring dequeue pointer */ + temp_64 &= ERST_PTR_MASK; + temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK); + } + + /* Clear the event handler busy flag (RW1C); event ring is empty. */ + temp_64 |= ERST_EHB; + xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); + + spin_unlock(&xhci->lock); + + return IRQ_HANDLED; +} + +irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) +{ + irqreturn_t ret; + + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + + ret = xhci_irq(hcd); + + return ret; +} + /**** Endpoint Ring Operations ****/ /* @@ -1827,10 +2225,12 @@ static int prepare_transfer(struct xhci_hcd *xhci, unsigned int stream_id, unsigned int num_trbs, struct urb *urb, - struct xhci_td **td, + unsigned int td_index, gfp_t mem_flags) { int ret; + struct urb_priv *urb_priv; + struct xhci_td *td; struct xhci_ring *ep_ring; struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); @@ -1846,24 +2246,29 @@ static int prepare_transfer(struct xhci_hcd *xhci, num_trbs, mem_flags); if (ret) return ret; - *td = kzalloc(sizeof(struct xhci_td), mem_flags); - if (!*td) - return -ENOMEM; - INIT_LIST_HEAD(&(*td)->td_list); - INIT_LIST_HEAD(&(*td)->cancelled_td_list); - ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); - if (unlikely(ret)) { - kfree(*td); - return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[td_index]; + + INIT_LIST_HEAD(&td->td_list); + INIT_LIST_HEAD(&td->cancelled_td_list); + + if (td_index == 0) { + ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); + if (unlikely(ret)) { + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; + return ret; + } } - (*td)->urb = urb; - urb->hcpriv = (void *) (*td); + td->urb = urb; /* Add this TD to the tail of the endpoint ring's TD list */ - list_add_tail(&(*td)->td_list, &ep_ring->td_list); - (*td)->start_seg = ep_ring->enq_seg; - (*td)->first_trb = ep_ring->enqueue; + list_add_tail(&td->td_list, &ep_ring->td_list); + td->start_seg = ep_ring->enq_seg; + td->first_trb = ep_ring->enqueue; + + urb_priv->td[td_index] = td; return 0; } @@ -2002,6 +2407,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, { struct xhci_ring *ep_ring; unsigned int num_trbs; + struct urb_priv *urb_priv; struct xhci_td *td; struct scatterlist *sg; int num_sgs; @@ -2022,9 +2428,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, trb_buff_len = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (trb_buff_len < 0) return trb_buff_len; + + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2145,6 +2555,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) { struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; struct xhci_td *td; int num_trbs; struct xhci_generic_trb *start_trb; @@ -2190,10 +2601,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2279,6 +2693,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct xhci_generic_trb *start_trb; int start_cycle; u32 field, length_field; + struct urb_priv *urb_priv; struct xhci_td *td; ep_ring = xhci_urb_to_transfer_ring(xhci, urb); @@ -2306,10 +2721,13 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, num_trbs++; ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, urb->stream_id, - num_trbs, urb, &td, mem_flags); + num_trbs, urb, 0, mem_flags); if (ret < 0) return ret; + urb_priv = urb->hcpriv; + td = urb_priv->td[0]; + /* * Don't give the first TRB to the hardware (by toggling the cycle bit) * until we've finished creating all the other TRBs. The ring's cycle @@ -2366,6 +2784,224 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, return 0; } +static int count_isoc_trbs_needed(struct xhci_hcd *xhci, + struct urb *urb, int i) +{ + int num_trbs = 0; + u64 addr, td_len, running_total; + + addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset); + td_len = urb->iso_frame_desc[i].length; + + running_total = TRB_MAX_BUFF_SIZE - + (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + if (running_total != 0) + num_trbs++; + + while (running_total < td_len) { + num_trbs++; + running_total += TRB_MAX_BUFF_SIZE; + } + + return num_trbs; +} + +/* This is for isoc transfer */ +static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_ring *ep_ring; + struct urb_priv *urb_priv; + struct xhci_td *td; + int num_tds, trbs_per_td; + struct xhci_generic_trb *start_trb; + bool first_trb; + int start_cycle; + u32 field, length_field; + int running_total, trb_buff_len, td_len, td_remain_len, ret; + u64 start_addr, addr; + int i, j; + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + + num_tds = urb->number_of_packets; + if (num_tds < 1) { + xhci_dbg(xhci, "Isoc URB with zero packets?\n"); + return -EINVAL; + } + + if (!in_interrupt()) + dev_dbg(&urb->dev->dev, "ep %#x - urb len = %#x (%d)," + " addr = %#llx, num_tds = %d\n", + urb->ep->desc.bEndpointAddress, + urb->transfer_buffer_length, + urb->transfer_buffer_length, + (unsigned long long)urb->transfer_dma, + num_tds); + + start_addr = (u64) urb->transfer_dma; + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { + first_trb = true; + + running_total = 0; + addr = start_addr + urb->iso_frame_desc[i].offset; + td_len = urb->iso_frame_desc[i].length; + td_remain_len = td_len; + + trbs_per_td = count_isoc_trbs_needed(xhci, urb, i); + + ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index, + urb->stream_id, trbs_per_td, urb, i, mem_flags); + if (ret < 0) + return ret; + + urb_priv = urb->hcpriv; + td = urb_priv->td[i]; + + for (j = 0; j < trbs_per_td; j++) { + u32 remainder = 0; + field = 0; + + if (first_trb) { + /* Queue the isoc TRB */ + field |= TRB_TYPE(TRB_ISOC); + /* Assume URB_ISO_ASAP is set */ + field |= TRB_SIA; + if (i > 0) + field |= ep_ring->cycle_state; + first_trb = false; + } else { + /* Queue other normal TRBs */ + field |= TRB_TYPE(TRB_NORMAL); + field |= ep_ring->cycle_state; + } + + /* Chain all the TRBs together; clear the chain bit in + * the last TRB to indicate it's the last TRB in the + * chain. + */ + if (j < trbs_per_td - 1) { + field |= TRB_CHAIN; + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; + } + + /* Calculate TRB length */ + trb_buff_len = TRB_MAX_BUFF_SIZE - + (addr & ((1 << TRB_MAX_BUFF_SHIFT) - 1)); + if (trb_buff_len > td_remain_len) + trb_buff_len = td_remain_len; + + remainder = xhci_td_remainder(td_len - running_total); + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); + queue_trb(xhci, ep_ring, false, false, + lower_32_bits(addr), + upper_32_bits(addr), + length_field, + /* We always want to know if the TRB was short, + * or we won't get an event when it completes. + * (Unless we use event data TRBs, which are a + * waste of space and HC resources.) + */ + field | TRB_ISP); + running_total += trb_buff_len; + + addr += trb_buff_len; + td_remain_len -= trb_buff_len; + } + + /* Check TD length */ + if (running_total != td_len) { + xhci_err(xhci, "ISOC TD length unmatch\n"); + return -EINVAL; + } + } + + wmb(); + start_trb->field[3] |= start_cycle; + + ring_ep_doorbell(xhci, slot_id, ep_index, urb->stream_id); + return 0; +} + +/* + * Check transfer ring to guarantee there is enough room for the urb. + * Update ISO URB start_frame and interval. + * Update interval as xhci_queue_intr_tx does. Just use xhci frame_index to + * update the urb->start_frame by now. + * Always assume URB_ISO_ASAP set, and NEVER use urb->start_frame as input. + */ +int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index) +{ + struct xhci_virt_device *xdev; + struct xhci_ring *ep_ring; + struct xhci_ep_ctx *ep_ctx; + int start_frame; + int xhci_interval; + int ep_interval; + int num_tds, num_trbs, i; + int ret; + + xdev = xhci->devs[slot_id]; + ep_ring = xdev->eps[ep_index].ring; + ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); + + num_trbs = 0; + num_tds = urb->number_of_packets; + for (i = 0; i < num_tds; i++) + num_trbs += count_isoc_trbs_needed(xhci, urb, i); + + /* Check the ring to guarantee there is enough room for the whole urb. + * Do not insert any td of the urb to the ring if the check failed. + */ + ret = prepare_ring(xhci, ep_ring, ep_ctx->ep_info & EP_STATE_MASK, + num_trbs, mem_flags); + if (ret) + return ret; + + start_frame = xhci_readl(xhci, &xhci->run_regs->microframe_index); + start_frame &= 0x3fff; + + urb->start_frame = start_frame; + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->start_frame >>= 3; + + xhci_interval = EP_INTERVAL_TO_UFRAMES(ep_ctx->ep_info); + ep_interval = urb->interval; + /* Convert to microframes */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + ep_interval *= 8; + /* FIXME change this to a warning and a suggestion to use the new API + * to set the polling interval (once the API is added). + */ + if (xhci_interval != ep_interval) { + if (!printk_ratelimit()) + dev_dbg(&urb->dev->dev, "Driver uses different interval" + " (%d microframe%s) than xHCI " + "(%d microframe%s)\n", + ep_interval, + ep_interval == 1 ? "" : "s", + xhci_interval, + xhci_interval == 1 ? "" : "s"); + urb->interval = xhci_interval; + /* Convert back to frames for LS/FS devices */ + if (urb->dev->speed == USB_SPEED_LOW || + urb->dev->speed == USB_SPEED_FULL) + urb->interval /= 8; + } + return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index); +} + /**** Command Ring Operations ****/ /* Generic function for queueing a command TRB on the command ring. diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 3998f72cd0c4..d5c550ea3e68 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -20,6 +20,7 @@ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/pci.h> #include <linux/irq.h> #include <linux/log2.h> #include <linux/module.h> @@ -171,22 +172,84 @@ int xhci_reset(struct xhci_hcd *xhci) return handshake(xhci, &xhci->op_regs->status, STS_CNR, 0, 250 * 1000); } +/* + * Free IRQs + * free all IRQs request + */ +static void xhci_free_irq(struct xhci_hcd *xhci) +{ + int i; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); -#if 0 -/* Set up MSI-X table for entry 0 (may claim other entries later) */ -static int xhci_setup_msix(struct xhci_hcd *xhci) + /* return if using legacy interrupt */ + if (xhci_to_hcd(xhci)->irq >= 0) + return; + + if (xhci->msix_entries) { + for (i = 0; i < xhci->msix_count; i++) + if (xhci->msix_entries[i].vector) + free_irq(xhci->msix_entries[i].vector, + xhci_to_hcd(xhci)); + } else if (pdev->irq >= 0) + free_irq(pdev->irq, xhci_to_hcd(xhci)); + + return; +} + +/* + * Set up MSI + */ +static int xhci_setup_msi(struct xhci_hcd *xhci) { int ret; + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); + + ret = pci_enable_msi(pdev); + if (ret) { + xhci_err(xhci, "failed to allocate MSI entry\n"); + return ret; + } + + ret = request_irq(pdev->irq, (irq_handler_t)xhci_msi_irq, + 0, "xhci_hcd", xhci_to_hcd(xhci)); + if (ret) { + xhci_err(xhci, "disable MSI interrupt\n"); + pci_disable_msi(pdev); + } + + return ret; +} + +/* + * Set up MSI-X + */ +static int xhci_setup_msix(struct xhci_hcd *xhci) +{ + int i, ret = 0; struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - xhci->msix_count = 0; - /* XXX: did I do this right? ixgbe does kcalloc for more than one */ - xhci->msix_entries = kmalloc(sizeof(struct msix_entry), GFP_KERNEL); + /* + * calculate number of msi-x vectors supported. + * - HCS_MAX_INTRS: the max number of interrupts the host can handle, + * with max number of interrupters based on the xhci HCSPARAMS1. + * - num_online_cpus: maximum msi-x vectors per CPUs core. + * Add additional 1 vector to ensure always available interrupt. + */ + xhci->msix_count = min(num_online_cpus() + 1, + HCS_MAX_INTRS(xhci->hcs_params1)); + + xhci->msix_entries = + kmalloc((sizeof(struct msix_entry))*xhci->msix_count, + GFP_KERNEL); if (!xhci->msix_entries) { xhci_err(xhci, "Failed to allocate MSI-X entries\n"); return -ENOMEM; } - xhci->msix_entries[0].entry = 0; + + for (i = 0; i < xhci->msix_count; i++) { + xhci->msix_entries[i].entry = i; + xhci->msix_entries[i].vector = 0; + } ret = pci_enable_msix(pdev, xhci->msix_entries, xhci->msix_count); if (ret) { @@ -194,20 +257,19 @@ static int xhci_setup_msix(struct xhci_hcd *xhci) goto free_entries; } - /* - * Pass the xhci pointer value as the request_irq "cookie". - * If more irqs are added, this will need to be unique for each one. - */ - ret = request_irq(xhci->msix_entries[0].vector, &xhci_irq, 0, - "xHCI", xhci_to_hcd(xhci)); - if (ret) { - xhci_err(xhci, "Failed to allocate MSI-X interrupt\n"); - goto disable_msix; + for (i = 0; i < xhci->msix_count; i++) { + ret = request_irq(xhci->msix_entries[i].vector, + (irq_handler_t)xhci_msi_irq, + 0, "xhci_hcd", xhci_to_hcd(xhci)); + if (ret) + goto disable_msix; } - xhci_dbg(xhci, "Finished setting up MSI-X\n"); - return 0; + + return ret; disable_msix: + xhci_err(xhci, "disable MSI-X interrupt\n"); + xhci_free_irq(xhci); pci_disable_msix(pdev); free_entries: kfree(xhci->msix_entries); @@ -215,21 +277,23 @@ free_entries: return ret; } -/* XXX: code duplication; can xhci_setup_msix call this? */ /* Free any IRQs and disable MSI-X */ static void xhci_cleanup_msix(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - if (!xhci->msix_entries) - return; - free_irq(xhci->msix_entries[0].vector, xhci); - pci_disable_msix(pdev); - kfree(xhci->msix_entries); - xhci->msix_entries = NULL; - xhci_dbg(xhci, "Finished cleaning up MSI-X\n"); + xhci_free_irq(xhci); + + if (xhci->msix_entries) { + pci_disable_msix(pdev); + kfree(xhci->msix_entries); + xhci->msix_entries = NULL; + } else { + pci_disable_msi(pdev); + } + + return; } -#endif /* * Initialize memory for HCD and xHC (one-time init). @@ -257,100 +321,8 @@ int xhci_init(struct usb_hcd *hcd) return retval; } -/* - * Called in interrupt context when there might be work - * queued on the event ring - * - * xhci->lock must be held by caller. - */ -static void xhci_work(struct xhci_hcd *xhci) -{ - u32 temp; - u64 temp_64; - - /* - * Clear the op reg interrupt status first, - * so we can receive interrupts from other MSI-X interrupters. - * Write 1 to clear the interrupt status. - */ - temp = xhci_readl(xhci, &xhci->op_regs->status); - temp |= STS_EINT; - xhci_writel(xhci, temp, &xhci->op_regs->status); - /* FIXME when MSI-X is supported and there are multiple vectors */ - /* Clear the MSI-X event interrupt status */ - - /* Acknowledge the interrupt */ - temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); - temp |= 0x3; - xhci_writel(xhci, temp, &xhci->ir_set->irq_pending); - /* Flush posted writes */ - xhci_readl(xhci, &xhci->ir_set->irq_pending); - - if (xhci->xhc_state & XHCI_STATE_DYING) - xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " - "Shouldn't IRQs be disabled?\n"); - else - /* FIXME this should be a delayed service routine - * that clears the EHB. - */ - xhci_handle_event(xhci); - - /* Clear the event handler busy flag (RW1C); the event ring should be empty. */ - temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); - xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); - /* Flush posted writes -- FIXME is this necessary? */ - xhci_readl(xhci, &xhci->ir_set->irq_pending); -} - /*-------------------------------------------------------------------------*/ -/* - * xHCI spec says we can get an interrupt, and if the HC has an error condition, - * we might get bad data out of the event ring. Section 4.10.2.7 has a list of - * indicators of an event TRB error, but we check the status *first* to be safe. - */ -irqreturn_t xhci_irq(struct usb_hcd *hcd) -{ - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - u32 temp, temp2; - union xhci_trb *trb; - - spin_lock(&xhci->lock); - trb = xhci->event_ring->dequeue; - /* Check if the xHC generated the interrupt, or the irq is shared */ - temp = xhci_readl(xhci, &xhci->op_regs->status); - temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending); - if (temp == 0xffffffff && temp2 == 0xffffffff) - goto hw_died; - - if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) { - spin_unlock(&xhci->lock); - return IRQ_NONE; - } - xhci_dbg(xhci, "op reg status = %08x\n", temp); - xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2); - xhci_dbg(xhci, "Event ring dequeue ptr:\n"); - xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", - (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), - lower_32_bits(trb->link.segment_ptr), - upper_32_bits(trb->link.segment_ptr), - (unsigned int) trb->link.intr_target, - (unsigned int) trb->link.control); - - if (temp & STS_FATAL) { - xhci_warn(xhci, "WARNING: Host System Error\n"); - xhci_halt(xhci); -hw_died: - xhci_to_hcd(xhci)->state = HC_STATE_HALT; - spin_unlock(&xhci->lock); - return -ESHUTDOWN; - } - - xhci_work(xhci); - spin_unlock(&xhci->lock); - - return IRQ_HANDLED; -} #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING void xhci_event_ring_work(unsigned long arg) @@ -423,21 +395,36 @@ int xhci_run(struct usb_hcd *hcd) { u32 temp; u64 temp_64; + u32 ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); void (*doorbell)(struct xhci_hcd *) = NULL; hcd->uses_new_polling = 1; - hcd->poll_rh = 0; xhci_dbg(xhci, "xhci_run\n"); -#if 0 /* FIXME: MSI not setup yet */ - /* Do this at the very last minute */ + /* unregister the legacy interrupt */ + if (hcd->irq) + free_irq(hcd->irq, hcd); + hcd->irq = -1; + ret = xhci_setup_msix(xhci); - if (!ret) - return ret; + if (ret) + /* fall back to msi*/ + ret = xhci_setup_msi(xhci); + + if (ret) { + /* fall back to legacy interrupt*/ + ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, + hcd->irq_descr, hcd); + if (ret) { + xhci_err(xhci, "request interrupt %d failed\n", + pdev->irq); + return ret; + } + hcd->irq = pdev->irq; + } - return -ENOSYS; -#endif #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING init_timer(&xhci->event_ring_timer); xhci->event_ring_timer.data = (unsigned long) xhci; @@ -495,7 +482,6 @@ int xhci_run(struct usb_hcd *hcd) return -ENODEV; } - xhci_dbg(xhci, "// @%p = 0x%x\n", &xhci->op_regs->command, temp); if (doorbell) (*doorbell)(xhci); if (xhci->quirks & XHCI_NEC_HOST) @@ -522,11 +508,9 @@ void xhci_stop(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); xhci_reset(xhci); + xhci_cleanup_msix(xhci); spin_unlock_irq(&xhci->lock); -#if 0 /* No MSI yet */ - xhci_cleanup_msix(xhci); -#endif #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING /* Tell the event ring poll function not to reschedule */ xhci->zombie = 1; @@ -560,11 +544,8 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - spin_unlock_irq(&xhci->lock); - -#if 0 xhci_cleanup_msix(xhci); -#endif + spin_unlock_irq(&xhci->lock); xhci_dbg(xhci, "xhci_shutdown completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); @@ -720,7 +701,8 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) unsigned long flags; int ret = 0; unsigned int slot_id, ep_index; - + struct urb_priv *urb_priv; + int size, i; if (!urb || xhci_check_args(hcd, urb->dev, urb->ep, true, __func__) <= 0) return -EINVAL; @@ -734,12 +716,36 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) ret = -EINVAL; goto exit; } - if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + if (!HCD_HW_ACCESSIBLE(hcd)) { if (!in_interrupt()) xhci_dbg(xhci, "urb submitted during PCI suspend\n"); ret = -ESHUTDOWN; goto exit; } + + if (usb_endpoint_xfer_isoc(&urb->ep->desc)) + size = urb->number_of_packets; + else + size = 1; + + urb_priv = kzalloc(sizeof(struct urb_priv) + + size * sizeof(struct xhci_td *), mem_flags); + if (!urb_priv) + return -ENOMEM; + + for (i = 0; i < size; i++) { + urb_priv->td[i] = kzalloc(sizeof(struct xhci_td), mem_flags); + if (!urb_priv->td[i]) { + urb_priv->length = i; + xhci_urb_free_priv(xhci, urb_priv); + return -ENOMEM; + } + } + + urb_priv->length = size; + urb_priv->td_cnt = 0; + urb->hcpriv = urb_priv; + if (usb_endpoint_xfer_control(&urb->ep->desc)) { /* Check to see if the max packet size for the default control * endpoint changed during FS device enumeration @@ -788,11 +794,18 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) slot_id, ep_index); spin_unlock_irqrestore(&xhci->lock, flags); } else { - ret = -EINVAL; + spin_lock_irqsave(&xhci->lock, flags); + if (xhci->xhc_state & XHCI_STATE_DYING) + goto dying; + ret = xhci_queue_isoc_tx_prepare(xhci, GFP_ATOMIC, urb, + slot_id, ep_index); + spin_unlock_irqrestore(&xhci->lock, flags); } exit: return ret; dying: + xhci_urb_free_priv(xhci, urb_priv); + urb->hcpriv = NULL; xhci_dbg(xhci, "Ep 0x%x: URB %p submitted for " "non-responsive xHCI host.\n", urb->ep->desc.bEndpointAddress, urb); @@ -800,6 +813,47 @@ dying: return -ESHUTDOWN; } +/* Get the right ring for the given URB. + * If the endpoint supports streams, boundary check the URB's stream ID. + * If the endpoint doesn't support streams, return the singular endpoint ring. + */ +static struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, + struct urb *urb) +{ + unsigned int slot_id; + unsigned int ep_index; + unsigned int stream_id; + struct xhci_virt_ep *ep; + + slot_id = urb->dev->slot_id; + ep_index = xhci_get_endpoint_index(&urb->ep->desc); + stream_id = urb->stream_id; + ep = &xhci->devs[slot_id]->eps[ep_index]; + /* Common case: no streams */ + if (!(ep->ep_state & EP_HAS_STREAMS)) + return ep->ring; + + if (stream_id == 0) { + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has streams, " + "but URB has no stream ID.\n", + slot_id, ep_index); + return NULL; + } + + if (stream_id < ep->stream_info->num_streams) + return ep->stream_info->stream_rings[stream_id]; + + xhci_warn(xhci, + "WARN: Slot ID %u, ep index %u has " + "stream IDs 1 to %u allocated, " + "but stream ID %u is requested.\n", + slot_id, ep_index, + ep->stream_info->num_streams - 1, + stream_id); + return NULL; +} + /* * Remove the URB's TD from the endpoint ring. This may cause the HC to stop * USB transfers, potentially stopping in the middle of a TRB buffer. The HC @@ -834,9 +888,10 @@ dying: int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { unsigned long flags; - int ret; + int ret, i; u32 temp; struct xhci_hcd *xhci; + struct urb_priv *urb_priv; struct xhci_td *td; unsigned int ep_index; struct xhci_ring *ep_ring; @@ -851,12 +906,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) temp = xhci_readl(xhci, &xhci->op_regs->status); if (temp == 0xffffffff) { xhci_dbg(xhci, "HW died, freeing TD.\n"); - td = (struct xhci_td *) urb->hcpriv; + urb_priv = urb->hcpriv; usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); - kfree(td); + xhci_urb_free_priv(xhci, urb_priv); return ret; } if (xhci->xhc_state & XHCI_STATE_DYING) { @@ -884,9 +939,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_dbg(xhci, "Endpoint ring:\n"); xhci_debug_ring(xhci, ep_ring); - td = (struct xhci_td *) urb->hcpriv; - list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); + urb_priv = urb->hcpriv; + + for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + td = urb_priv->td[i]; + list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list); + } + /* Queue a stop endpoint command, but only if this is * the first cancellation to be handled. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 6c7e3430ec93..34a60d9f056a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -720,6 +720,14 @@ struct xhci_virt_ep { struct timer_list stop_cmd_timer; int stop_cmds_pending; struct xhci_hcd *xhci; + /* + * Sometimes the xHC can not process isochronous endpoint ring quickly + * enough, and it will miss some isoc tds on the ring and generate + * a Missed Service Error Event. + * Set skip flag when receive a Missed Service Error Event and + * process the missed tds on the endpoint ring. + */ + bool skip; }; struct xhci_virt_device { @@ -911,6 +919,9 @@ struct xhci_event_cmd { /* Control transfer TRB specific fields */ #define TRB_DIR_IN (1<<16) +/* Isochronous TRB specific fields */ +#define TRB_SIA (1<<31) + struct xhci_generic_trb { u32 field[4]; }; @@ -1082,6 +1093,12 @@ struct xhci_scratchpad { dma_addr_t *sp_dma_buffers; }; +struct urb_priv { + int length; + int td_cnt; + struct xhci_td *td[0]; +}; + /* * Each segment table entry is 4*32bits long. 1K seems like an ok size: * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, @@ -1130,7 +1147,7 @@ struct xhci_hcd { int page_size; /* Valid values are 12 to 20, inclusive */ int page_shift; - /* only one MSI vector for now, but might need more later */ + /* msi-x vectors */ int msix_count; struct msix_entry *msix_entries; /* data structures */ @@ -1327,11 +1344,6 @@ void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, struct xhci_ring *xhci_dma_to_transfer_ring( struct xhci_virt_ep *ep, u64 address); -struct xhci_ring *xhci_urb_to_transfer_ring(struct xhci_hcd *xhci, - struct urb *urb); -struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci, - unsigned int slot_id, unsigned int ep_index, - unsigned int stream_id); struct xhci_ring *xhci_stream_id_to_ring( struct xhci_virt_device *dev, unsigned int ep_index, @@ -1339,6 +1351,7 @@ struct xhci_ring *xhci_stream_id_to_ring( struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, bool allocate_in_ctx, bool allocate_completion, gfp_t mem_flags); +void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); void xhci_free_command(struct xhci_hcd *xhci, struct xhci_command *command); @@ -1358,6 +1371,7 @@ void xhci_stop(struct usb_hcd *hcd); void xhci_shutdown(struct usb_hcd *hcd); int xhci_get_frame(struct usb_hcd *hcd); irqreturn_t xhci_irq(struct usb_hcd *hcd); +irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd); int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev); void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev); int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, @@ -1386,8 +1400,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); void *xhci_setup_one_noop(struct xhci_hcd *xhci); -void xhci_handle_event(struct xhci_hcd *xhci); -void xhci_set_hc_event_deq(struct xhci_hcd *xhci); int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); @@ -1401,6 +1413,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index); +int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags, + struct urb *urb, int slot_id, unsigned int ep_index); int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed); int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 82e16630a78b..aecf380f6ecc 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -650,7 +650,7 @@ static int ftdi_elan_open(struct inode *inode, struct file *file) static int ftdi_elan_release(struct inode *inode, struct file *file) { - struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + struct usb_ftdi *ftdi = file->private_data; if (ftdi == NULL) return -ENODEV; up(&ftdi->sw_lock); /* decrement the count on our device */ @@ -673,7 +673,7 @@ static ssize_t ftdi_elan_read(struct file *file, char __user *buffer, int bytes_read = 0; int retry_on_empty = 10; int retry_on_timeout = 5; - struct usb_ftdi *ftdi = (struct usb_ftdi *)file->private_data; + struct usb_ftdi *ftdi = file->private_data; if (ftdi->disconnected > 0) { return -ENODEV; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 7dc9d3c69984..2de49c8887c5 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -18,7 +18,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/sched.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/poll.h> #include <linux/usb/iowarrior.h> @@ -61,6 +61,7 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); /* Module parameters */ +static DEFINE_MUTEX(iowarrior_mutex); static int debug = 0; module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); @@ -282,7 +283,7 @@ static ssize_t iowarrior_read(struct file *file, char __user *buffer, int read_idx; int offset; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; /* verify that the device wasn't unplugged */ if (dev == NULL || !dev->present) @@ -348,7 +349,7 @@ static ssize_t iowarrior_write(struct file *file, char *buf = NULL; /* for IOW24 and IOW56 we need a buffer */ struct urb *int_out_urb = NULL; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; mutex_lock(&dev->mutex); /* verify that the device wasn't unplugged */ @@ -483,7 +484,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, int retval; int io_res; /* checks for bytes read/written and copy_to/from_user results */ - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; if (dev == NULL) { return -ENODEV; } @@ -493,7 +494,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, return -ENOMEM; /* lock this object */ - lock_kernel(); + mutex_lock(&iowarrior_mutex); mutex_lock(&dev->mutex); /* verify that the device wasn't unplugged */ @@ -585,7 +586,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd, error_out: /* unlock the device */ mutex_unlock(&dev->mutex); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); kfree(buffer); return retval; } @@ -602,12 +603,12 @@ static int iowarrior_open(struct inode *inode, struct file *file) dbg("%s", __func__); - lock_kernel(); + mutex_lock(&iowarrior_mutex); subminor = iminor(inode); interface = usb_find_interface(&iowarrior_driver, subminor); if (!interface) { - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); err("%s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -617,7 +618,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&iowarrior_open_disc_lock); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); return -ENODEV; } @@ -644,7 +645,7 @@ static int iowarrior_open(struct inode *inode, struct file *file) out: mutex_unlock(&dev->mutex); - unlock_kernel(); + mutex_unlock(&iowarrior_mutex); return retval; } @@ -656,7 +657,7 @@ static int iowarrior_release(struct inode *inode, struct file *file) struct iowarrior *dev; int retval = 0; - dev = (struct iowarrior *)file->private_data; + dev = file->private_data; if (dev == NULL) { return -ENODEV; } diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 8547bf9e3175..6482c6e2e6bd 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -448,7 +448,7 @@ static int tower_release (struct inode *inode, struct file *file) dbg(2, "%s: enter", __func__); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; if (dev == NULL) { dbg(1, "%s: object is NULL", __func__); @@ -597,7 +597,7 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, dbg(2, "%s: enter, count = %Zd", __func__, count); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; /* lock this object */ if (mutex_lock_interruptible(&dev->lock)) { @@ -686,7 +686,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t dbg(2, "%s: enter, count = %Zd", __func__, count); - dev = (struct lego_usb_tower *)file->private_data; + dev = file->private_data; /* lock this object */ if (mutex_lock_interruptible(&dev->lock)) { diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index a85771b1563d..cc13ae61712a 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -32,7 +32,7 @@ #include <linux/kernel.h> #include <linux/signal.h> #include <linux/sched.h> -#include <linux/smp_lock.h> +#include <linux/mutex.h> #include <linux/errno.h> #include <linux/random.h> #include <linux/poll.h> @@ -72,6 +72,7 @@ struct rio_usb_data { struct mutex lock; /* general race avoidance */ }; +static DEFINE_MUTEX(rio500_mutex); static struct rio_usb_data rio_instance; static int open_rio(struct inode *inode, struct file *file) @@ -79,12 +80,12 @@ static int open_rio(struct inode *inode, struct file *file) struct rio_usb_data *rio = &rio_instance; /* against disconnect() */ - lock_kernel(); + mutex_lock(&rio500_mutex); mutex_lock(&(rio->lock)); if (rio->isopen || !rio->present) { mutex_unlock(&(rio->lock)); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return -EBUSY; } rio->isopen = 1; @@ -94,7 +95,7 @@ static int open_rio(struct inode *inode, struct file *file) mutex_unlock(&(rio->lock)); dev_info(&rio->rio_dev->dev, "Rio opened.\n"); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return 0; } @@ -491,7 +492,7 @@ static void disconnect_rio(struct usb_interface *intf) struct rio_usb_data *rio = usb_get_intfdata (intf); usb_set_intfdata (intf, NULL); - lock_kernel(); + mutex_lock(&rio500_mutex); if (rio) { usb_deregister_dev(intf, &usb_rio_class); @@ -501,7 +502,7 @@ static void disconnect_rio(struct usb_interface *intf) /* better let it finish - the release will do whats needed */ rio->rio_dev = NULL; mutex_unlock(&(rio->lock)); - unlock_kernel(); + mutex_unlock(&rio500_mutex); return; } kfree(rio->ibuf); @@ -512,7 +513,7 @@ static void disconnect_rio(struct usb_interface *intf) rio->present = 0; mutex_unlock(&(rio->lock)); } - unlock_kernel(); + mutex_unlock(&rio500_mutex); } static const struct usb_device_id rio_table[] = { diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index d25814c172b2..70d00e99a4b4 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2487,7 +2487,7 @@ sisusb_release(struct inode *inode, struct file *file) { struct sisusb_usb_data *sisusb; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2519,7 +2519,7 @@ sisusb_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) u16 buf16; u32 buf32, address; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2661,7 +2661,7 @@ sisusb_write(struct file *file, const char __user *buffer, size_t count, u16 buf16; u32 buf32, address; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2804,7 +2804,7 @@ sisusb_lseek(struct file *file, loff_t offset, int orig) struct sisusb_usb_data *sisusb; loff_t ret; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); @@ -2969,7 +2969,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) long retval = 0; u32 __user *argp = (u32 __user *)arg; - if (!(sisusb = (struct sisusb_usb_data *)file->private_data)) + if (!(sisusb = file->private_data)) return -ENODEV; mutex_lock(&sisusb->lock); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 7828c764b323..d00dde19194c 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -16,7 +16,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/errno.h> #include <linux/mutex.h> #include <asm/uaccess.h> @@ -30,6 +29,7 @@ #define IOCTL_GET_DRV_VERSION 2 +static DEFINE_MUTEX(lcd_mutex); static const struct usb_device_id id_table[] = { { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, { }, @@ -74,12 +74,12 @@ static int lcd_open(struct inode *inode, struct file *file) struct usb_interface *interface; int subminor, r; - lock_kernel(); + mutex_lock(&lcd_mutex); subminor = iminor(inode); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { - unlock_kernel(); + mutex_unlock(&lcd_mutex); err ("USBLCD: %s - error, can't find device for minor %d", __func__, subminor); return -ENODEV; @@ -89,7 +89,7 @@ static int lcd_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { mutex_unlock(&open_disc_mutex); - unlock_kernel(); + mutex_unlock(&lcd_mutex); return -ENODEV; } @@ -101,13 +101,13 @@ static int lcd_open(struct inode *inode, struct file *file) r = usb_autopm_get_interface(interface); if (r < 0) { kref_put(&dev->kref, lcd_delete); - unlock_kernel(); + mutex_unlock(&lcd_mutex); return r; } /* save our object in the file's private structure */ file->private_data = dev; - unlock_kernel(); + mutex_unlock(&lcd_mutex); return 0; } @@ -116,7 +116,7 @@ static int lcd_release(struct inode *inode, struct file *file) { struct usb_lcd *dev; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -132,7 +132,7 @@ static ssize_t lcd_read(struct file *file, char __user * buffer, size_t count, l int retval = 0; int bytes_read; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; /* do a blocking bulk read to get data from the device */ retval = usb_bulk_msg(dev->udev, @@ -158,20 +158,20 @@ static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) u16 bcdDevice; char buf[30]; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; switch (cmd) { case IOCTL_GET_HARD_VERSION: - lock_kernel(); + mutex_lock(&lcd_mutex); bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); sprintf(buf,"%1d%1d.%1d%1d", (bcdDevice & 0xF000)>>12, (bcdDevice & 0xF00)>>8, (bcdDevice & 0xF0)>>4, (bcdDevice & 0xF)); - unlock_kernel(); + mutex_unlock(&lcd_mutex); if (copy_to_user((void __user *)arg,buf,strlen(buf))!=0) return -EFAULT; break; @@ -217,7 +217,7 @@ static ssize_t lcd_write(struct file *file, const char __user * user_buffer, siz struct urb *urb = NULL; char *buf = NULL; - dev = (struct usb_lcd *)file->private_data; + dev = file->private_data; /* verify that we actually have some data to write */ if (count == 0) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index 16dffe99d9f1..eef370eb7a54 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -136,7 +136,7 @@ try_iso: iso_out = e; } } - if ((in && out) || (iso_in && iso_out)) + if ((in && out) || iso_in || iso_out) goto found; } return -EINVAL; @@ -162,6 +162,9 @@ found: dev->in_iso_pipe = usb_rcvisocpipe (udev, iso_in->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + } + + if (iso_out) { dev->iso_out = &iso_out->desc; dev->out_iso_pipe = usb_sndisocpipe (udev, iso_out->desc.bEndpointAddress @@ -1378,7 +1381,6 @@ static void iso_callback (struct urb *urb) break; } } - simple_free_urb (urb); ctx->pending--; if (ctx->pending == 0) { @@ -1495,6 +1497,7 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param, } simple_free_urb (urbs [i]); + urbs[i] = NULL; context.pending--; context.submit_error = 1; break; @@ -1504,6 +1507,10 @@ test_iso_queue (struct usbtest_dev *dev, struct usbtest_param *param, wait_for_completion (&context.done); + for (i = 0; i < param->sglen; i++) { + if (urbs[i]) + simple_free_urb(urbs[i]); + } /* * Isochronous transfers are expected to fail sometimes. As an * arbitrary limit, we will report an error if any submissions @@ -1548,6 +1555,7 @@ fail: * off just killing the userspace task and waiting for it to exit. */ +/* No BKL needed */ static int usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) { @@ -2170,7 +2178,7 @@ static struct usb_driver usbtest_driver = { .name = "usbtest", .id_table = id_table, .probe = usbtest_probe, - .ioctl = usbtest_ioctl, + .unlocked_ioctl = usbtest_ioctl, .disconnect = usbtest_disconnect, .suspend = usbtest_suspend, .resume = usbtest_resume, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 61c76b13f0f1..44cb37b5a4dc 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -646,17 +646,14 @@ static int mon_bin_open(struct inode *inode, struct file *file) size_t size; int rc; - lock_kernel(); mutex_lock(&mon_lock); if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) { mutex_unlock(&mon_lock); - unlock_kernel(); return -ENODEV; } if (mbus != &mon_bus0 && mbus->u_bus == NULL) { printk(KERN_ERR TAG ": consistency error on open\n"); mutex_unlock(&mon_lock); - unlock_kernel(); return -ENODEV; } @@ -689,7 +686,6 @@ static int mon_bin_open(struct inode *inode, struct file *file) file->private_data = rp; mutex_unlock(&mon_lock); - unlock_kernel(); return 0; err_allocbuff: @@ -698,7 +694,6 @@ err_allocvec: kfree(rp); err_alloc: mutex_unlock(&mon_lock); - unlock_kernel(); return rc; } @@ -954,7 +949,7 @@ static int mon_bin_queued(struct mon_reader_bin *rp) /* */ -static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +static long mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { struct mon_reader_bin *rp = file->private_data; // struct mon_bus* mbus = rp->r.m_bus; @@ -1009,7 +1004,7 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) mutex_lock(&rp->fetch_lock); spin_lock_irqsave(&rp->b_lock, flags); - mon_free_buff(rp->b_vec, size/CHUNK_SIZE); + mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE); kfree(rp->b_vec); rp->b_vec = vec; rp->b_size = size; @@ -1094,19 +1089,6 @@ static int mon_bin_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return ret; } -static long mon_bin_unlocked_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - int ret; - - lock_kernel(); - ret = mon_bin_ioctl(file, cmd, arg); - unlock_kernel(); - - return ret; -} - - #ifdef CONFIG_COMPAT static long mon_bin_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) @@ -1250,7 +1232,7 @@ static const struct file_operations mon_fops_binary = { .read = mon_bin_read, /* .write = mon_text_write, */ .poll = mon_bin_poll, - .unlocked_ioctl = mon_bin_unlocked_ioctl, + .unlocked_ioctl = mon_bin_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = mon_bin_compat_ioctl, #endif diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3b795c56221f..540c766c4f86 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -704,7 +704,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD if (int_usb & MUSB_INTR_CONNECT) { struct usb_hcd *hcd = musb_to_hcd(musb); - void __iomem *mbase = musb->mregs; handled = IRQ_HANDLED; musb->is_active = 1; @@ -717,9 +716,9 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, if (is_peripheral_active(musb)) { /* REVISIT HNP; just force disconnect */ } - musb_writew(mbase, MUSB_INTRTXE, musb->epmask); - musb_writew(mbase, MUSB_INTRRXE, musb->epmask & 0xfffe); - musb_writeb(mbase, MUSB_INTRUSBE, 0xf7); + musb_writew(musb->mregs, MUSB_INTRTXE, musb->epmask); + musb_writew(musb->mregs, MUSB_INTRRXE, musb->epmask & 0xfffe); + musb_writeb(musb->mregs, MUSB_INTRUSBE, 0xf7); #endif musb->port1_status &= ~(USB_PORT_STAT_LOW_SPEED |USB_PORT_STAT_HIGH_SPEED diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c index bba76af0c0c6..c79a5e30d437 100644 --- a/drivers/usb/musb/musb_debugfs.c +++ b/drivers/usb/musb/musb_debugfs.c @@ -92,29 +92,29 @@ static const struct musb_register_map musb_regmap[] = { { "LS_EOF1", 0x7E, 8 }, { "SOFT_RST", 0x7F, 8 }, { "DMA_CNTLch0", 0x204, 16 }, - { "DMA_ADDRch0", 0x208, 16 }, - { "DMA_COUNTch0", 0x20C, 16 }, + { "DMA_ADDRch0", 0x208, 32 }, + { "DMA_COUNTch0", 0x20C, 32 }, { "DMA_CNTLch1", 0x214, 16 }, - { "DMA_ADDRch1", 0x218, 16 }, - { "DMA_COUNTch1", 0x21C, 16 }, + { "DMA_ADDRch1", 0x218, 32 }, + { "DMA_COUNTch1", 0x21C, 32 }, { "DMA_CNTLch2", 0x224, 16 }, - { "DMA_ADDRch2", 0x228, 16 }, - { "DMA_COUNTch2", 0x22C, 16 }, + { "DMA_ADDRch2", 0x228, 32 }, + { "DMA_COUNTch2", 0x22C, 32 }, { "DMA_CNTLch3", 0x234, 16 }, - { "DMA_ADDRch3", 0x238, 16 }, - { "DMA_COUNTch3", 0x23C, 16 }, + { "DMA_ADDRch3", 0x238, 32 }, + { "DMA_COUNTch3", 0x23C, 32 }, { "DMA_CNTLch4", 0x244, 16 }, - { "DMA_ADDRch4", 0x248, 16 }, - { "DMA_COUNTch4", 0x24C, 16 }, + { "DMA_ADDRch4", 0x248, 32 }, + { "DMA_COUNTch4", 0x24C, 32 }, { "DMA_CNTLch5", 0x254, 16 }, - { "DMA_ADDRch5", 0x258, 16 }, - { "DMA_COUNTch5", 0x25C, 16 }, + { "DMA_ADDRch5", 0x258, 32 }, + { "DMA_COUNTch5", 0x25C, 32 }, { "DMA_CNTLch6", 0x264, 16 }, - { "DMA_ADDRch6", 0x268, 16 }, - { "DMA_COUNTch6", 0x26C, 16 }, + { "DMA_ADDRch6", 0x268, 32 }, + { "DMA_COUNTch6", 0x26C, 32 }, { "DMA_CNTLch7", 0x274, 16 }, - { "DMA_ADDRch7", 0x278, 16 }, - { "DMA_COUNTch7", 0x27C, 16 }, + { "DMA_ADDRch7", 0x278, 32 }, + { "DMA_COUNTch7", 0x27C, 32 }, { } /* Terminating Entry */ }; diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 21b9788d0243..59bef8f3a358 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -402,6 +402,9 @@ __acquires(musb->lock) musb->g.a_alt_hnp_support = 1; break; #endif + case USB_DEVICE_DEBUG_MODE: + handled = 0; + break; stall: default: handled = -EINVAL; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index 92e85e027cfb..43233c397b6e 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -244,7 +244,7 @@ int musb_hub_control( spin_lock_irqsave(&musb->lock, flags); - if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + if (unlikely(!HCD_HW_ACCESSIBLE(hcd))) { spin_unlock_irqrestore(&musb->lock, flags); return -ESHUTDOWN; } diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index dc66e4376d49..6dc107f25245 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -173,10 +173,7 @@ static int dma_channel_program(struct dma_channel *channel, musb_channel->max_packet_sz = packet_sz; channel->status = MUSB_DMA_STATUS_BUSY; - if ((mode == 1) && (len >= packet_sz)) - configure_channel(channel, packet_sz, 1, dma_addr, len); - else - configure_channel(channel, packet_sz, 0, dma_addr, len); + configure_channel(channel, packet_sz, mode, dma_addr, len); return true; } diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index e06d65e36bf7..2111a241dd03 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -32,8 +32,6 @@ #include <linux/clk.h> #include <linux/io.h> -#include <plat/mux.h> - #include "musb_core.h" #include "omap2430.h" @@ -194,10 +192,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data) u32 l; struct omap_musb_board_data *data = board_data; -#if defined(CONFIG_ARCH_OMAP2430) - omap_cfg_reg(AE5_2430_USB0HS_STP); -#endif - /* We require some kind of external transceiver, hooked * up through ULPI. TWL4030-family PMICs include one, * which needs a driver, drivers aren't always needed. diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 3d2d3e549bd1..3b1289572d72 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -49,8 +49,6 @@ config USB_ULPI Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. - The only chip currently supported is NXP's ISP1504 - config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c index d331b222ad21..ccc81950822b 100644 --- a/drivers/usb/otg/ulpi.c +++ b/drivers/usb/otg/ulpi.c @@ -31,30 +31,110 @@ #define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) -#define TR_FLAG(flags, a, b) (((flags) & a) ? b : 0) - /* ULPI hardcoded IDs, used for probing */ static unsigned int ulpi_ids[] = { ULPI_ID(0x04cc, 0x1504), /* NXP ISP1504 */ + ULPI_ID(0x0424, 0x0006), /* SMSC USB3319 */ }; -static int ulpi_set_flags(struct otg_transceiver *otg) +static int ulpi_set_otg_flags(struct otg_transceiver *otg) { - unsigned int flags = 0; + unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN | + ULPI_OTG_CTRL_DM_PULLDOWN; - if (otg->flags & USB_OTG_PULLUP_ID) + if (otg->flags & ULPI_OTG_ID_PULLUP) flags |= ULPI_OTG_CTRL_ID_PULLUP; - if (otg->flags & USB_OTG_PULLDOWN_DM) - flags |= ULPI_OTG_CTRL_DM_PULLDOWN; + /* + * ULPI Specification rev.1.1 default + * for Dp/DmPulldown is enabled. + */ + if (otg->flags & ULPI_OTG_DP_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN; - if (otg->flags & USB_OTG_PULLDOWN_DP) - flags |= ULPI_OTG_CTRL_DP_PULLDOWN; + if (otg->flags & ULPI_OTG_DM_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN; - if (otg->flags & USB_OTG_EXT_VBUS_INDICATOR) + if (otg->flags & ULPI_OTG_EXTVBUSIND) flags |= ULPI_OTG_CTRL_EXTVBUSIND; - return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL)); + return otg_io_write(otg, flags, ULPI_OTG_CTRL); +} + +static int ulpi_set_fc_flags(struct otg_transceiver *otg) +{ + unsigned int flags = 0; + + /* + * ULPI Specification rev.1.1 default + * for XcvrSelect is Full Speed. + */ + if (otg->flags & ULPI_FC_HS) + flags |= ULPI_FUNC_CTRL_HIGH_SPEED; + else if (otg->flags & ULPI_FC_LS) + flags |= ULPI_FUNC_CTRL_LOW_SPEED; + else if (otg->flags & ULPI_FC_FS4LS) + flags |= ULPI_FUNC_CTRL_FS4LS; + else + flags |= ULPI_FUNC_CTRL_FULL_SPEED; + + if (otg->flags & ULPI_FC_TERMSEL) + flags |= ULPI_FUNC_CTRL_TERMSELECT; + + /* + * ULPI Specification rev.1.1 default + * for OpMode is Normal Operation. + */ + if (otg->flags & ULPI_FC_OP_NODRV) + flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + else if (otg->flags & ULPI_FC_OP_DIS_NRZI) + flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI; + else if (otg->flags & ULPI_FC_OP_NSYNC_NEOP) + flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP; + else + flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + + /* + * ULPI Specification rev.1.1 default + * for SuspendM is Powered. + */ + flags |= ULPI_FUNC_CTRL_SUSPENDM; + + return otg_io_write(otg, flags, ULPI_FUNC_CTRL); +} + +static int ulpi_set_ic_flags(struct otg_transceiver *otg) +{ + unsigned int flags = 0; + + if (otg->flags & ULPI_IC_AUTORESUME) + flags |= ULPI_IFC_CTRL_AUTORESUME; + + if (otg->flags & ULPI_IC_EXTVBUS_INDINV) + flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS; + + if (otg->flags & ULPI_IC_IND_PASSTHRU) + flags |= ULPI_IFC_CTRL_PASSTHRU; + + if (otg->flags & ULPI_IC_PROTECT_DIS) + flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE; + + return otg_io_write(otg, flags, ULPI_IFC_CTRL); +} + +static int ulpi_set_flags(struct otg_transceiver *otg) +{ + int ret; + + ret = ulpi_set_otg_flags(otg); + if (ret) + return ret; + + ret = ulpi_set_ic_flags(otg); + if (ret) + return ret; + + return ulpi_set_fc_flags(otg); } static int ulpi_init(struct otg_transceiver *otg) @@ -81,6 +161,31 @@ static int ulpi_init(struct otg_transceiver *otg) return -ENODEV; } +static int ulpi_set_host(struct otg_transceiver *otg, struct usb_bus *host) +{ + unsigned int flags = otg_io_read(otg, ULPI_IFC_CTRL); + + if (!host) { + otg->host = NULL; + return 0; + } + + otg->host = host; + + flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_3_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_CARKITMODE); + + if (otg->flags & ULPI_IC_6PIN_SERIAL) + flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE; + else if (otg->flags & ULPI_IC_3PIN_SERIAL) + flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE; + else if (otg->flags & ULPI_IC_CARKIT) + flags |= ULPI_IFC_CTRL_CARKITMODE; + + return otg_io_write(otg, flags, ULPI_IFC_CTRL); +} + static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) { unsigned int flags = otg_io_read(otg, ULPI_OTG_CTRL); @@ -88,14 +193,14 @@ static int ulpi_set_vbus(struct otg_transceiver *otg, bool on) flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); if (on) { - if (otg->flags & USB_OTG_DRV_VBUS) + if (otg->flags & ULPI_OTG_DRVVBUS) flags |= ULPI_OTG_CTRL_DRVVBUS; - if (otg->flags & USB_OTG_DRV_VBUS_EXT) + if (otg->flags & ULPI_OTG_DRVVBUS_EXT) flags |= ULPI_OTG_CTRL_DRVVBUS_EXT; } - return otg_io_write(otg, flags, ULPI_SET(ULPI_OTG_CTRL)); + return otg_io_write(otg, flags, ULPI_OTG_CTRL); } struct otg_transceiver * @@ -112,6 +217,7 @@ otg_ulpi_create(struct otg_io_access_ops *ops, otg->flags = flags; otg->io_ops = ops; otg->init = ulpi_init; + otg->set_host = ulpi_set_host; otg->set_vbus = ulpi_set_vbus; return otg; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index bd8aab0ef1cf..916b2b6d765f 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -642,6 +642,15 @@ config USB_SERIAL_ZIO To compile this driver as a module, choose M here: the module will be called zio. +config USB_SERIAL_SSU100 + tristate "USB Quatech SSU-100 Single Port Serial Driver" + help + Say Y here if you want to use the Quatech SSU-100 single + port usb to serial adapter. + + To compile this driver as a module, choose M here: the + module will be called ssu100. + config USB_SERIAL_DEBUG tristate "USB Debugging Device" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index e54c728c016e..40ebe17b6ea8 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o +obj-$(CONFIG_USB_SERIAL_SSU100) += ssu100.o obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_WWAN) += usb_wwan.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 8b8c7976b4c0..2bef4415c19c 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -126,6 +126,10 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ + { USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */ + { USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */ + { USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */ + { USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */ { } /* Terminating Entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e298dc4baed7..eb12d9b096b4 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -157,6 +157,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_6_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_7_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_CAT_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_WKEY_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USINT_RS232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) }, @@ -746,6 +749,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index d01946db8fac..6e612c52e763 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -40,6 +40,11 @@ #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ +/* US Interface Navigator (http://www.usinterface.com/) */ +#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */ +#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */ +#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ + /* OOCDlink by Joern Kaipf <joernk@web.de> * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -1032,3 +1037,8 @@ #define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 #define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 +/* + * Segway Robotic Mobility Platform USB interface (using VID 0x0403) + * Submitted by John G. Rogers + */ +#define SEGWAY_RMP200_PID 0xe729 diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index a817ced82835..ca92f67747cc 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -208,18 +208,23 @@ retry: urb->transfer_buffer_length = count; usb_serial_debug_data(debug, &port->dev, __func__, count, urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes += count; + spin_unlock_irqrestore(&port->lock, flags); + + clear_bit(i, &port->write_urbs_free); result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, "%s - error submitting urb: %d\n", __func__, result); + set_bit(i, &port->write_urbs_free); + spin_lock_irqsave(&port->lock, flags); + port->tx_bytes -= count; + spin_unlock_irqrestore(&port->lock, flags); + clear_bit_unlock(USB_SERIAL_WRITE_BUSY, &port->flags); return result; } - clear_bit(i, &port->write_urbs_free); - - spin_lock_irqsave(&port->lock, flags); - port->tx_bytes += count; - spin_unlock_irqrestore(&port->lock, flags); /* Try sending off another urb, unless in irq context (in which case * there will be no free urb). */ diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 0fca2659206f..dc47f986df57 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1298,7 +1298,7 @@ static int download_fw(struct edgeport_serial *serial) kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); - return status; + return -EINVAL; } /* verify the write -- must do this in order for @@ -1321,7 +1321,7 @@ static int download_fw(struct edgeport_serial *serial) kfree(header); kfree(rom_desc); kfree(ti_manuf_desc); - return status; + return -EINVAL; } kfree(vheader); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 28913fa95fb7..4735931b4c7b 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -534,7 +534,6 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x413C, 0x4009) }, /* Dell Axim USB Sync */ { USB_DEVICE(0x4505, 0x0010) }, /* Smartphone */ { USB_DEVICE(0x5E04, 0xCE00) }, /* SAGEM Wireless Assistant */ - { USB_DEVICE(0x0BB4, 0x00CF) }, /* HTC smartphone modems */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 74551cb2e8ee..efc72113216b 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1,6 +1,8 @@ /* * Infinity Unlimited USB Phoenix driver * + * Copyright (C) 2010 James Courtier-Dutton (James@superbug.co.uk) + * Copyright (C) 2007 Alain Degreffe (eczema@ecze.com) * * Original code taken from iuutool (Copyright (C) 2006 Juan Carlos Borrás) @@ -40,7 +42,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v0.11" +#define DRIVER_VERSION "v0.12" #define DRIVER_DESC "Infinity USB Unlimited Phoenix driver" static const struct usb_device_id id_table[] = { @@ -81,6 +83,9 @@ struct iuu_private { u8 *dbgbuf; /* debug buffer */ u8 len; int vcc; /* vcc (either 3 or 5 V) */ + u32 baud; + u32 boost; + u32 clk; }; @@ -157,13 +162,14 @@ static int iuu_tiocmset(struct tty_struct *tty, struct file *file, port->number, set, clear); spin_lock_irqsave(&priv->lock, flags); - if (set & TIOCM_RTS) - priv->tiostatus = TIOCM_RTS; - if (!(set & TIOCM_RTS) && priv->tiostatus == TIOCM_RTS) { + if ((set & TIOCM_RTS) && !(priv->tiostatus == TIOCM_RTS)) { dbg("%s TIOCMSET RESET called !!!", __func__); priv->reset = 1; } + if (set & TIOCM_RTS) + priv->tiostatus = TIOCM_RTS; + spin_unlock_irqrestore(&priv->lock, flags); return 0; } @@ -851,20 +857,24 @@ static int iuu_uart_off(struct usb_serial_port *port) return status; } -static int iuu_uart_baud(struct usb_serial_port *port, u32 baud, +static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, u32 *actual, u8 parity) { int status; + u32 baud; u8 *dataout; u8 DataCount = 0; u8 T1Frekvens = 0; u8 T1reload = 0; unsigned int T1FrekvensHZ = 0; + dbg("%s - enter baud_base=%d", __func__, baud_base); dataout = kmalloc(sizeof(u8) * 5, GFP_KERNEL); if (!dataout) return -ENOMEM; + /*baud = (((priv->clk / 35) * baud_base) / 100000); */ + baud = baud_base; if (baud < 1200 || baud > 230400) { kfree(dataout); @@ -948,15 +958,20 @@ static void iuu_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { const u32 supported_mask = CMSPAR|PARENB|PARODD; - + struct iuu_private *priv = usb_get_serial_port_data(port); unsigned int cflag = tty->termios->c_cflag; int status; u32 actual; u32 parity; int csize = CS7; - int baud = 9600; /* Fixed for the moment */ + int baud; u32 newval = cflag & supported_mask; + /* Just use the ospeed. ispeed should be the same. */ + baud = tty->termios->c_ospeed; + + dbg("%s - enter c_ospeed or baud=%d", __func__, baud); + /* compute the parity parameter */ parity = 0; if (cflag & CMSPAR) { /* Using mark space */ @@ -976,15 +991,15 @@ static void iuu_set_termios(struct tty_struct *tty, /* set it */ status = iuu_uart_baud(port, - (clockmode == 2) ? 16457 : 9600 * boost / 100, + baud * priv->boost / 100, &actual, parity); /* set the termios value to the real one, so the user now what has * changed. We support few fields so its easies to copy the old hw * settings back over and then adjust them */ - if (old_termios) - tty_termios_copy_hw(tty->termios, old_termios); + if (old_termios) + tty_termios_copy_hw(tty->termios, old_termios); if (status != 0) /* Set failed - return old bits */ return; /* Re-encode speed, parity and csize */ @@ -1018,6 +1033,7 @@ static void iuu_close(struct usb_serial_port *port) static void iuu_init_termios(struct tty_struct *tty) { + dbg("%s - enter", __func__); *(tty->termios) = tty_std_termios; tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600 | TIOCM_CTS | CSTOPB | PARENB; @@ -1033,10 +1049,16 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) struct usb_serial *serial = port->serial; u8 *buf; int result; + int baud; u32 actual; struct iuu_private *priv = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); + baud = tty->termios->c_ospeed; + tty->termios->c_ispeed = baud; + /* Re-encode speed */ + tty_encode_baud_rate(tty, baud, baud); + + dbg("%s - port %d, baud %d", __func__, port->number, baud); usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); @@ -1071,23 +1093,29 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port) iuu_uart_on(port); if (boost < 100) boost = 100; + priv->boost = boost; + priv->baud = baud; switch (clockmode) { case 2: /* 3.680 Mhz */ + priv->clk = IUU_CLK_3680000; iuu_clk(port, IUU_CLK_3680000 * boost / 100); result = - iuu_uart_baud(port, 9600 * boost / 100, &actual, + iuu_uart_baud(port, baud * boost / 100, &actual, IUU_PARITY_EVEN); break; case 3: /* 6.00 Mhz */ iuu_clk(port, IUU_CLK_6000000 * boost / 100); + priv->clk = IUU_CLK_6000000; + /* Ratio of 6000000 to 3500000 for baud 9600 */ result = iuu_uart_baud(port, 16457 * boost / 100, &actual, IUU_PARITY_EVEN); break; default: /* 3.579 Mhz */ iuu_clk(port, IUU_CLK_3579000 * boost / 100); + priv->clk = IUU_CLK_3579000; result = - iuu_uart_baud(port, 9600 * boost / 100, &actual, + iuu_uart_baud(port, baud * boost / 100, &actual, IUU_PARITY_EVEN); } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5cd30e4345c6..9fc6ea2c681f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -145,7 +145,10 @@ static void option_instat_callback(struct urb *urb); #define HUAWEI_PRODUCT_E143D 0x143D #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define HUAWEI_PRODUCT_K4505 0x1464 +#define HUAWEI_PRODUCT_K3765 0x1465 #define HUAWEI_PRODUCT_E14AC 0x14AC +#define HUAWEI_PRODUCT_ETS1220 0x1803 #define QUANTA_VENDOR_ID 0x0408 #define QUANTA_PRODUCT_Q101 0xEA02 @@ -264,9 +267,6 @@ static void option_instat_callback(struct urb *urb); #define BANDRICH_PRODUCT_1011 0x1011 #define BANDRICH_PRODUCT_1012 0x1012 -#define AMOI_VENDOR_ID 0x1614 -#define AMOI_PRODUCT_9508 0x0800 - #define QUALCOMM_VENDOR_ID 0x05C6 #define CMOTECH_VENDOR_ID 0x16d8 @@ -482,8 +482,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) }, { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) }, - { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */ @@ -1017,6 +1019,13 @@ static int option_probe(struct usb_serial *serial, serial->interface->cur_altsetting->desc.bInterfaceClass != 0xff) return -ENODEV; + /* Don't bind network interfaces on Huawei K3765 & K4505 */ + if (serial->dev->descriptor.idVendor == HUAWEI_VENDOR_ID && + (serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K3765 || + serial->dev->descriptor.idProduct == HUAWEI_PRODUCT_K4505) && + serial->interface->cur_altsetting->desc.bInterfaceNumber == 1) + return -ENODEV; + data = serial->private = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c new file mode 100644 index 000000000000..6e82d4f54bc8 --- /dev/null +++ b/drivers/usb/serial/ssu100.c @@ -0,0 +1,698 @@ +/* + * usb-serial driver for Quatech SSU-100 + * + * based on ftdi_sio.c and the original serqt_usb.c from Quatech + * + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> +#include <linux/uaccess.h> + +#define QT_OPEN_CLOSE_CHANNEL 0xca +#define QT_SET_GET_DEVICE 0xc2 +#define QT_SET_GET_REGISTER 0xc0 +#define QT_GET_SET_PREBUF_TRIG_LVL 0xcc +#define QT_SET_ATF 0xcd +#define QT_GET_SET_UART 0xc1 +#define QT_TRANSFER_IN 0xc0 +#define QT_HW_FLOW_CONTROL_MASK 0xc5 +#define QT_SW_FLOW_CONTROL_MASK 0xc6 + +#define MODEM_CTL_REGISTER 0x04 +#define MODEM_STATUS_REGISTER 0x06 + + +#define SERIAL_LSR_OE 0x02 +#define SERIAL_LSR_PE 0x04 +#define SERIAL_LSR_FE 0x08 +#define SERIAL_LSR_BI 0x10 + +#define SERIAL_LSR_TEMT 0x40 + +#define SERIAL_MCR_DTR 0x01 +#define SERIAL_MCR_RTS 0x02 +#define SERIAL_MCR_LOOP 0x10 + +#define SERIAL_MSR_CTS 0x10 +#define SERIAL_MSR_CD 0x80 +#define SERIAL_MSR_RI 0x40 +#define SERIAL_MSR_DSR 0x20 +#define SERIAL_MSR_MASK 0xf0 + +#define SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS) + +#define SERIAL_8_DATA 0x03 +#define SERIAL_7_DATA 0x02 +#define SERIAL_6_DATA 0x01 +#define SERIAL_5_DATA 0x00 + +#define SERIAL_ODD_PARITY 0X08 +#define SERIAL_EVEN_PARITY 0X18 + +#define MAX_BAUD_RATE 460800 + +#define ATC_DISABLED 0x00 +#define DUPMODE_BITS 0xc0 +#define RR_BITS 0x03 +#define LOOPMODE_BITS 0x41 +#define RS232_MODE 0x00 +#define RTSCTS_TO_CONNECTOR 0x40 +#define CLKS_X4 0x02 +#define FULLPWRBIT 0x00000080 +#define NEXT_BOARD_POWER_BIT 0x00000004 + +static int debug = 1; + +/* Version Information */ +#define DRIVER_VERSION "v0.1" +#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" + +#define USB_VENDOR_ID_QUATECH 0x061d /* Quatech VID */ +#define QUATECH_SSU100 0xC020 /* SSU100 */ + +static const struct usb_device_id id_table[] = { + {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + + +static struct usb_driver ssu100_driver = { + .name = "ssu100", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .no_dynamic_id = 1, + .supports_autosuspend = 1, +}; + +struct ssu100_port_private { + u8 shadowLSR; + u8 shadowMSR; + wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */ + unsigned short max_packet_size; +}; + +static void ssu100_release(struct usb_serial *serial) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port); + + dbg("%s", __func__); + kfree(priv); +} + +static inline int ssu100_control_msg(struct usb_device *dev, + u8 request, u16 data, u16 index) +{ + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + request, 0x40, data, index, + NULL, 0, 300); +} + +static inline int ssu100_setdevice(struct usb_device *dev, u8 *data) +{ + u16 x = ((u16)(data[1] << 8) | (u16)(data[0])); + + return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0); +} + + +static inline int ssu100_getdevice(struct usb_device *dev, u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_DEVICE, 0xc0, 0, 0, + data, 3, 300); +} + +static inline int ssu100_getregister(struct usb_device *dev, + unsigned short uart, + unsigned short reg, + u8 *data) +{ + return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0xc0, reg, + uart, data, sizeof(*data), 300); + +} + + +static inline int ssu100_setregister(struct usb_device *dev, + unsigned short uart, + u16 data) +{ + u16 value = (data << 8) | MODEM_CTL_REGISTER; + + return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), + QT_SET_GET_REGISTER, 0x40, value, uart, + NULL, 0, 300); + +} + +#define set_mctrl(dev, set) update_mctrl((dev), (set), 0) +#define clear_mctrl(dev, clear) update_mctrl((dev), 0, (clear)) + +/* these do not deal with device that have more than 1 port */ +static inline int update_mctrl(struct usb_device *dev, unsigned int set, + unsigned int clear) +{ + unsigned urb_value; + int result; + + if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { + dbg("%s - DTR|RTS not being set|cleared", __func__); + return 0; /* no change */ + } + + clear &= ~set; /* 'set' takes precedence over 'clear' */ + urb_value = 0; + if (set & TIOCM_DTR) + urb_value |= SERIAL_MCR_DTR; + if (set & TIOCM_RTS) + urb_value |= SERIAL_MCR_RTS; + + result = ssu100_setregister(dev, 0, urb_value); + if (result < 0) + dbg("%s Error from MODEM_CTRL urb", __func__); + + return result; +} + +static int ssu100_initdevice(struct usb_device *dev) +{ + u8 *data; + int result = 0; + + dbg("%s", __func__); + + data = kzalloc(3, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dbg("%s - get_device failed %i", __func__, result); + goto out; + } + + data[1] &= ~FULLPWRBIT; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dbg("%s - setdevice failed %i", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); + if (result < 0) { + dbg("%s - set prebuffer level failed %i", __func__, result); + goto out; + } + + result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); + if (result < 0) { + dbg("%s - set ATFprebuffer level failed %i", __func__, result); + goto out; + } + + result = ssu100_getdevice(dev, data); + if (result < 0) { + dbg("%s - get_device failed %i", __func__, result); + goto out; + } + + data[0] &= ~(RR_BITS | DUPMODE_BITS); + data[0] |= CLKS_X4; + data[1] &= ~(LOOPMODE_BITS); + data[1] |= RS232_MODE; + + result = ssu100_setdevice(dev, data); + if (result < 0) { + dbg("%s - setdevice failed %i", __func__, result); + goto out; + } + +out: kfree(data); + return result; + +} + + +static void ssu100_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + struct ktermios *old_termios) +{ + struct usb_device *dev = port->serial->dev; + struct ktermios *termios = tty->termios; + u16 baud, divisor, remainder; + unsigned int cflag = termios->c_cflag; + u16 urb_value = 0; /* will hold the new flags */ + int result; + + dbg("%s", __func__); + + if (cflag & PARENB) { + if (cflag & PARODD) + urb_value |= SERIAL_ODD_PARITY; + else + urb_value |= SERIAL_EVEN_PARITY; + } + + switch (cflag & CSIZE) { + case CS5: + urb_value |= SERIAL_5_DATA; + break; + case CS6: + urb_value |= SERIAL_6_DATA; + break; + case CS7: + urb_value |= SERIAL_7_DATA; + break; + default: + case CS8: + urb_value |= SERIAL_8_DATA; + break; + } + + baud = tty_get_baud_rate(tty); + if (!baud) + baud = 9600; + + dbg("%s - got baud = %d\n", __func__, baud); + + + divisor = MAX_BAUD_RATE / baud; + remainder = MAX_BAUD_RATE % baud; + if (((remainder * 2) >= baud) && (baud != 110)) + divisor++; + + urb_value = urb_value << 8; + + result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); + if (result < 0) + dbg("%s - set uart failed", __func__); + + if (cflag & CRTSCTS) + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + SERIAL_CRTSCTS, 0); + else + result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, + 0, 0); + if (result < 0) + dbg("%s - set HW flow control failed", __func__); + + if (I_IXOFF(tty) || I_IXON(tty)) { + u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); + + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + x, 0); + } else + result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK, + 0, 0); + + if (result < 0) + dbg("%s - set SW flow control failed", __func__); + +} + + +static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_device *dev = port->serial->dev; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + u8 *data; + int result; + + dbg("%s - port %d", __func__, port->number); + + data = kzalloc(2, GFP_KERNEL); + if (!data) + return -ENOMEM; + + result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), + QT_OPEN_CLOSE_CHANNEL, + QT_TRANSFER_IN, 0x01, + 0, data, 2, 300); + if (result < 0) { + dbg("%s - open failed %i", __func__, result); + kfree(data); + return result; + } + + priv->shadowLSR = data[0] & (SERIAL_LSR_OE | SERIAL_LSR_PE | + SERIAL_LSR_FE | SERIAL_LSR_BI); + + priv->shadowMSR = data[1] & (SERIAL_MSR_CTS | SERIAL_MSR_DSR | + SERIAL_MSR_RI | SERIAL_MSR_CD); + + kfree(data); + +/* set to 9600 */ + result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); + if (result < 0) + dbg("%s - set uart failed", __func__); + + if (tty) + ssu100_set_termios(tty, port, tty->termios); + + return usb_serial_generic_open(tty, port); +} + +static void ssu100_close(struct usb_serial_port *port) +{ + dbg("%s", __func__); + usb_serial_generic_close(port); +} + +static int get_serial_info(struct usb_serial_port *port, + struct serial_struct __user *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.line = port->serial->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = port->bulk_out_size; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int ssu100_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + + dbg("%s cmd 0x%04x", __func__, cmd); + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(port, + (struct serial_struct __user *) arg); + + case TIOCMIWAIT: + while (priv != NULL) { + u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK; + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + else { + u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR; + if (!diff) + return -EIO; /* no change => error */ + + /* Return 0 if caller wanted to know about + these bits */ + + if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) || + ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) || + ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) || + ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS))) + return 0; + } + } + return 0; + + default: + break; + } + + dbg("%s arg not supported", __func__); + + return -ENOIOCTLCMD; +} + +static void ssu100_set_max_packet_size(struct usb_serial_port *port) +{ + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + struct usb_serial *serial = port->serial; + struct usb_device *udev = serial->dev; + + struct usb_interface *interface = serial->interface; + struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc; + + unsigned num_endpoints; + int i; + + num_endpoints = interface->cur_altsetting->desc.bNumEndpoints; + dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints); + + for (i = 0; i < num_endpoints; i++) { + dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1, + interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize); + ep_desc = &interface->cur_altsetting->endpoint[i].desc; + } + + /* set max packet size based on descriptor */ + priv->max_packet_size = ep_desc->wMaxPacketSize; + + dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size); +} + +static int ssu100_attach(struct usb_serial *serial) +{ + struct ssu100_port_private *priv; + struct usb_serial_port *port = *serial->port; + + dbg("%s", __func__); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__, + sizeof(*priv)); + return -ENOMEM; + } + + init_waitqueue_head(&priv->delta_msr_wait); + usb_set_serial_port_data(port, priv); + + ssu100_set_max_packet_size(port); + + return ssu100_initdevice(serial->dev); +} + +static int ssu100_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + u8 *d; + int r; + + dbg("%s\n", __func__); + + d = kzalloc(2, GFP_KERNEL); + if (!d) + return -ENOMEM; + + r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d); + if (r < 0) + goto mget_out; + + r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1); + if (r < 0) + goto mget_out; + + r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) | + (d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) | + (d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) | + (d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) | + (d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) | + (d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0); + +mget_out: + kfree(d); + return r; +} + +static int ssu100_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_device *dev = port->serial->dev; + + dbg("%s\n", __func__); + return update_mctrl(dev, set, clear); +} + +static void ssu100_dtr_rts(struct usb_serial_port *port, int on) +{ + struct usb_device *dev = port->serial->dev; + + dbg("%s\n", __func__); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) { + /* Disable flow control */ + if (!on && + ssu100_setregister(dev, 0, 0) < 0) + dev_err(&port->dev, "error from flowcontrol urb\n"); + /* drop RTS and DTR */ + if (on) + set_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + else + clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS); + } + mutex_unlock(&port->serial->disc_mutex); +} + +static int ssu100_process_packet(struct tty_struct *tty, + struct usb_serial_port *port, + struct ssu100_port_private *priv, + char *packet, int len) +{ + int i; + char flag; + char *ch; + + dbg("%s - port %d", __func__, port->number); + + if (len < 4) { + dbg("%s - malformed packet", __func__); + return 0; + } + + if ((packet[0] == 0x1b) && (packet[1] == 0x1b) && + ((packet[2] == 0x00) || (packet[2] == 0x01))) { + if (packet[2] == 0x00) + priv->shadowLSR = packet[3] & (SERIAL_LSR_OE | + SERIAL_LSR_PE | + SERIAL_LSR_FE | + SERIAL_LSR_BI); + + if (packet[2] == 0x01) { + priv->shadowMSR = packet[3]; + wake_up_interruptible(&priv->delta_msr_wait); + } + + len -= 4; + ch = packet + 4; + } else + ch = packet; + + if (!len) + return 0; /* status only */ + + if (port->port.console && port->sysrq) { + for (i = 0; i < len; i++, ch++) { + if (!usb_serial_handle_sysrq_char(tty, port, *ch)) + tty_insert_flip_char(tty, *ch, flag); + } + } else + tty_insert_flip_string_fixed_flag(tty, ch, flag, len); + + return len; +} + +static void ssu100_process_read_urb(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct ssu100_port_private *priv = usb_get_serial_port_data(port); + char *data = (char *)urb->transfer_buffer; + struct tty_struct *tty; + int count = 0; + int i; + int len; + + dbg("%s", __func__); + + tty = tty_port_tty_get(&port->port); + if (!tty) + return; + + for (i = 0; i < urb->actual_length; i += priv->max_packet_size) { + len = min_t(int, urb->actual_length - i, priv->max_packet_size); + count += ssu100_process_packet(tty, port, priv, &data[i], len); + } + + if (count) + tty_flip_buffer_push(tty); + tty_kref_put(tty); +} + + +static struct usb_serial_driver ssu100_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ssu100", + }, + .description = DRIVER_DESC, + .id_table = id_table, + .usb_driver = &ssu100_driver, + .num_ports = 1, + .bulk_in_size = 256, + .bulk_out_size = 256, + .open = ssu100_open, + .close = ssu100_close, + .attach = ssu100_attach, + .release = ssu100_release, + .dtr_rts = ssu100_dtr_rts, + .process_read_urb = ssu100_process_read_urb, + .tiocmget = ssu100_tiocmget, + .tiocmset = ssu100_tiocmset, + .ioctl = ssu100_ioctl, + .set_termios = ssu100_set_termios, +}; + +static int __init ssu100_init(void) +{ + int retval; + + dbg("%s", __func__); + + /* register with usb-serial */ + retval = usb_serial_register(&ssu100_device); + + if (retval) + goto failed_usb_sio_register; + + retval = usb_register(&ssu100_driver); + if (retval) + goto failed_usb_register; + + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + + return 0; + +failed_usb_register: + usb_serial_deregister(&ssu100_device); +failed_usb_sio_register: + return retval; +} + +static void __exit ssu100_exit(void) +{ + usb_deregister(&ssu100_driver); + usb_serial_deregister(&ssu100_device); +} + +module_init(ssu100_init); +module_exit(ssu100_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 941c2d409f85..2a982e62963b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -653,6 +653,7 @@ exit: return id; } +/* Caller must hold table_lock */ static struct usb_serial_driver *search_serial_device( struct usb_interface *iface) { @@ -718,17 +719,23 @@ int usb_serial_probe(struct usb_interface *interface, int num_ports = 0; int max_endpoints; - lock_kernel(); /* guard against unloading a serial driver module */ + mutex_lock(&table_lock); type = search_serial_device(interface); if (!type) { - unlock_kernel(); + mutex_unlock(&table_lock); dbg("none matched"); return -ENODEV; } + if (!try_module_get(type->driver.owner)) { + mutex_unlock(&table_lock); + dev_err(&interface->dev, "module get failed, exiting\n"); + return -EIO; + } + mutex_unlock(&table_lock); + serial = create_serial(dev, interface, type); if (!serial) { - unlock_kernel(); dev_err(&interface->dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -737,20 +744,11 @@ int usb_serial_probe(struct usb_interface *interface, if (type->probe) { const struct usb_device_id *id; - if (!try_module_get(type->driver.owner)) { - unlock_kernel(); - dev_err(&interface->dev, - "module get failed, exiting\n"); - kfree(serial); - return -EIO; - } - id = get_iface_id(type, interface); retval = type->probe(serial, id); module_put(type->driver.owner); if (retval) { - unlock_kernel(); dbg("sub driver rejected device"); kfree(serial); return retval; @@ -822,7 +820,6 @@ int usb_serial_probe(struct usb_interface *interface, * properly during a later invocation of usb_serial_probe */ if (num_bulk_in == 0 || num_bulk_out == 0) { - unlock_kernel(); dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n"); kfree(serial); return -ENODEV; @@ -835,7 +832,6 @@ int usb_serial_probe(struct usb_interface *interface, if (type == &usb_serial_generic_device) { num_ports = num_bulk_out; if (num_ports == 0) { - unlock_kernel(); dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n"); kfree(serial); @@ -847,7 +843,6 @@ int usb_serial_probe(struct usb_interface *interface, /* if this device type has a calc_num_ports function, call it */ if (type->calc_num_ports) { if (!try_module_get(type->driver.owner)) { - unlock_kernel(); dev_err(&interface->dev, "module get failed, exiting\n"); kfree(serial); @@ -878,7 +873,6 @@ int usb_serial_probe(struct usb_interface *interface, max_endpoints = max(max_endpoints, num_interrupt_out); max_endpoints = max(max_endpoints, (int)serial->num_ports); serial->num_port_pointers = max_endpoints; - unlock_kernel(); dbg("%s - setting up %d port structures for this device", __func__, max_endpoints); @@ -1077,6 +1071,8 @@ int usb_serial_probe(struct usb_interface *interface, dev_set_name(&port->dev, "ttyUSB%d", port->number); dbg ("%s - registering %s", __func__, dev_name(&port->dev)); port->dev_state = PORT_REGISTERING; + device_enable_async_suspend(&port->dev); + retval = device_add(&port->dev); if (retval) { dev_err(&port->dev, "Error registering port device, " @@ -1349,6 +1345,7 @@ int usb_serial_register(struct usb_serial_driver *driver) driver->description = driver->driver.name; /* Add this device to our list of devices */ + mutex_lock(&table_lock); list_add(&driver->driver_list, &usb_serial_driver_list); retval = usb_serial_bus_register(driver); @@ -1360,6 +1357,7 @@ int usb_serial_register(struct usb_serial_driver *driver) printk(KERN_INFO "USB Serial support registered for %s\n", driver->description); + mutex_unlock(&table_lock); return retval; } EXPORT_SYMBOL_GPL(usb_serial_register); @@ -1370,8 +1368,10 @@ void usb_serial_deregister(struct usb_serial_driver *device) /* must be called with BKL held */ printk(KERN_INFO "USB Serial deregistering driver %s\n", device->description); + mutex_lock(&table_lock); list_del(&device->driver_list); usb_serial_bus_deregister(device); + mutex_unlock(&table_lock); } EXPORT_SYMBOL_GPL(usb_serial_deregister); diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 54cc94277acb..6542ca40d505 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -269,7 +269,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* The firmware will time-out commands after 20 seconds. Some commands * can legitimately take longer than this, so we use a different * command that only waits for the interrupt and then sends status, - * without having to send a new ATAPI command to the device. + * without having to send a new ATAPI command to the device. * * NOTE: There is some indication that a data transfer after a timeout * may not work, but that is a condition that should never happen. @@ -324,14 +324,14 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* Find the length we desire to read. */ switch (srb->cmnd[0]) { - case INQUIRY: - case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ - case MODE_SENSE: - case MODE_SENSE_10: - length = le16_to_cpu(fst->Count); - break; - default: - length = scsi_bufflen(srb); + case INQUIRY: + case REQUEST_SENSE: /* 16 or 18 bytes? spec says 18, lots of devices only have 16 */ + case MODE_SENSE: + case MODE_SENSE_10: + length = le16_to_cpu(fst->Count); + break; + default: + length = scsi_bufflen(srb); } /* verify that this amount is legal */ @@ -414,7 +414,7 @@ static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) /* should never hit here -- filtered in usb.c */ US_DEBUGP ("freecom unimplemented direction: %d\n", us->srb->sc_data_direction); - // Return fail, SCSI seems to handle this better. + /* Return fail, SCSI seems to handle this better. */ return USB_STOR_TRANSPORT_FAILED; break; } @@ -494,8 +494,7 @@ static void pdump (void *ibuffer, int length) offset = 0; } offset += sprintf (line+offset, "%08x:", i); - } - else if ((i & 7) == 0) { + } else if ((i & 7) == 0) { offset += sprintf (line+offset, " -"); } offset += sprintf (line+offset, " %02x", buffer[i] & 0xff); diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index e9cbc1467f76..6b9982cd5423 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -1456,8 +1456,7 @@ static int isd200_init_info(struct us_data *us) int retStatus = ISD200_GOOD; struct isd200_info *info; - info = (struct isd200_info *) - kzalloc(sizeof(struct isd200_info), GFP_KERNEL); + info = kzalloc(sizeof(struct isd200_info), GFP_KERNEL); if (!info) retStatus = ISD200_ERROR; else { diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index a7d0bf9d92a7..90bb0175a152 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -336,6 +336,7 @@ static int usb_stor_control_thread(void * __us) else { US_DEBUG(usb_stor_show_command(us->srb)); us->proto_handler(us->srb, us); + usb_mark_last_busy(us->pusb_dev); } /* lock access to the state */ @@ -845,6 +846,7 @@ static int usb_stor_scan_thread(void * __us) /* Should we unbind if no devices were detected? */ } + usb_autopm_put_interface(us->pusb_intf); complete_and_exit(&us->scanning_done, 0); } @@ -968,6 +970,7 @@ int usb_stor_probe2(struct us_data *us) goto BadDevice; } + usb_autopm_get_interface_no_resume(us->pusb_intf); wake_up_process(th); return 0; @@ -1040,6 +1043,7 @@ static struct usb_driver usb_storage_driver = { .pre_reset = usb_stor_pre_reset, .post_reset = usb_stor_post_reset, .id_table = usb_storage_usb_ids, + .supports_autosuspend = 1, .soft_unbind = 1, }; diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index d110588b56f1..552679b8dbd1 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -142,7 +142,7 @@ static int skel_release(struct inode *inode, struct file *file) { struct usb_skel *dev; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -162,7 +162,7 @@ static int skel_flush(struct file *file, fl_owner_t id) struct usb_skel *dev; int res; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; if (dev == NULL) return -ENODEV; @@ -246,7 +246,7 @@ static ssize_t skel_read(struct file *file, char *buffer, size_t count, int rv; bool ongoing_io; - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; /* if we cannot read at all, return EOF */ if (!dev->bulk_in_urb || !count) @@ -401,7 +401,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, char *buf = NULL; size_t writesize = min(count, (size_t)MAX_TRANSFER); - dev = (struct usb_skel *)file->private_data; + dev = file->private_data; /* verify that we actually have some data to write */ if (count == 0) |
