diff options
Diffstat (limited to 'drivers/usb')
71 files changed, 5192 insertions, 5641 deletions
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7ff467d262..c1b0affae290 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ -obj-$(CONFIG_ETRAX_USB_HOST) += host/ obj-$(CONFIG_USB_OHCI_AT91) += host/ obj-$(CONFIG_USB_ACM) += class/ diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 3dfa3e40e148..30b7bfbc985a 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -4,6 +4,7 @@ * * Copyright (C) 2004 David Woodhouse, Duncan Sands, Roman Kagan * Copyright (C) 2005 Duncan Sands, Roman Kagan (rkagan % mail ! ru) + * Copyright (C) 2007 Simon Arlott * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -34,14 +35,14 @@ #include <linux/errno.h> #include <linux/slab.h> #include <linux/init.h> -#include <linux/device.h> /* FIXME: linux/firmware.h should include it itself */ +#include <linux/device.h> #include <linux/firmware.h> #include <linux/mutex.h> #include "usbatm.h" -#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands" -#define DRIVER_VERSION "0.2" +#define DRIVER_AUTHOR "Roman Kagan, David Woodhouse, Duncan Sands, Simon Arlott" +#define DRIVER_VERSION "0.3" #define DRIVER_DESC "Conexant AccessRunner ADSL USB modem driver" static const char cxacru_driver_name[] = "cxacru"; @@ -64,7 +65,7 @@ static const char cxacru_driver_name[] = "cxacru"; #define SDRAM_ENA 0x1 #define CMD_TIMEOUT 2000 /* msecs */ -#define POLL_INTERVAL 5000 /* msecs */ +#define POLL_INTERVAL 1 /* secs */ /* commands for interaction with the modem through the control channel before * firmware is loaded */ @@ -146,6 +147,13 @@ enum cxacru_info_idx { CXINF_MAX = 0x1c, }; +enum cxacru_poll_state { + CXPOLL_STOPPING, + CXPOLL_STOPPED, + CXPOLL_POLLING, + CXPOLL_SHUTDOWN +}; + struct cxacru_modem_type { u32 pll_f_clk; u32 pll_b_clk; @@ -158,7 +166,12 @@ struct cxacru_data { const struct cxacru_modem_type *modem_type; int line_status; + struct mutex adsl_state_serialize; + int adsl_status; struct delayed_work poll_work; + u32 card_info[CXINF_MAX]; + struct mutex poll_state_serialize; + int poll_state; /* contol handles */ struct mutex cm_serialize; @@ -170,6 +183,275 @@ struct cxacru_data { struct completion snd_done; }; +static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, + u8 *wdata, int wsize, u8 *rdata, int rsize); +static void cxacru_poll_status(struct work_struct *work); + +/* Card info exported through sysfs */ +#define CXACRU__ATTR_INIT(_name) \ +static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL) + +#define CXACRU_CMD_INIT(_name) \ +static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \ + cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name) + +#define CXACRU_ATTR_INIT(_value, _type, _name) \ +static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \ + struct device_attribute *attr, char *buf) \ +{ \ + struct usb_interface *intf = to_usb_interface(dev); \ + struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); \ + struct cxacru_data *instance = usbatm_instance->driver_data; \ + return cxacru_sysfs_showattr_##_type(instance->card_info[_value], buf); \ +} \ +CXACRU__ATTR_INIT(_name) + +#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name) +#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) +#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name) + +#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name) +#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) +#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name) + +static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%u\n", value); +} + +static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", value); +} + +static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf) +{ + if (unlikely(value < 0)) { + return snprintf(buf, PAGE_SIZE, "%d.%02u\n", + value / 100, -value % 100); + } else { + return snprintf(buf, PAGE_SIZE, "%d.%02u\n", + value / 100, value % 100); + } +} + +static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf) +{ + switch (value) { + case 0: return snprintf(buf, PAGE_SIZE, "no\n"); + case 1: return snprintf(buf, PAGE_SIZE, "yes\n"); + default: return 0; + } +} + +static ssize_t cxacru_sysfs_showattr_LINK(u32 value, char *buf) +{ + switch (value) { + case 1: return snprintf(buf, PAGE_SIZE, "not connected\n"); + case 2: return snprintf(buf, PAGE_SIZE, "connected\n"); + case 3: return snprintf(buf, PAGE_SIZE, "lost\n"); + default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value); + } +} + +static ssize_t cxacru_sysfs_showattr_LINE(u32 value, char *buf) +{ + switch (value) { + case 0: return snprintf(buf, PAGE_SIZE, "down\n"); + case 1: return snprintf(buf, PAGE_SIZE, "attempting to activate\n"); + case 2: return snprintf(buf, PAGE_SIZE, "training\n"); + case 3: return snprintf(buf, PAGE_SIZE, "channel analysis\n"); + case 4: return snprintf(buf, PAGE_SIZE, "exchange\n"); + case 5: return snprintf(buf, PAGE_SIZE, "up\n"); + case 6: return snprintf(buf, PAGE_SIZE, "waiting\n"); + case 7: return snprintf(buf, PAGE_SIZE, "initialising\n"); + default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value); + } +} + +static ssize_t cxacru_sysfs_showattr_MODU(u32 value, char *buf) +{ + switch (value) { + case 0: return 0; + case 1: return snprintf(buf, PAGE_SIZE, "ANSI T1.413\n"); + case 2: return snprintf(buf, PAGE_SIZE, "ITU-T G.992.1 (G.DMT)\n"); + case 3: return snprintf(buf, PAGE_SIZE, "ITU-T G.992.2 (G.LITE)\n"); + default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value); + } +} + +/* + * This could use MAC_ADDRESS_HIGH and MAC_ADDRESS_LOW, but since + * this data is already in atm_dev there's no point. + * + * MAC_ADDRESS_HIGH = 0x????5544 + * MAC_ADDRESS_LOW = 0x33221100 + * Where 00-55 are bytes 0-5 of the MAC. + */ +static ssize_t cxacru_sysfs_show_mac_address(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); + struct atm_dev *atm_dev = usbatm_instance->atm_dev; + + return snprintf(buf, PAGE_SIZE, "%02x:%02x:%02x:%02x:%02x:%02x\n", + atm_dev->esi[0], atm_dev->esi[1], atm_dev->esi[2], + atm_dev->esi[3], atm_dev->esi[4], atm_dev->esi[5]); +} + +static ssize_t cxacru_sysfs_show_adsl_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); + struct cxacru_data *instance = usbatm_instance->driver_data; + u32 value = instance->card_info[CXINF_LINE_STARTABLE]; + + switch (value) { + case 0: return snprintf(buf, PAGE_SIZE, "running\n"); + case 1: return snprintf(buf, PAGE_SIZE, "stopped\n"); + default: return snprintf(buf, PAGE_SIZE, "unknown (%u)\n", value); + } +} + +static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usbatm_data *usbatm_instance = usb_get_intfdata(intf); + struct cxacru_data *instance = usbatm_instance->driver_data; + int ret; + int poll = -1; + char str_cmd[8]; + int len = strlen(buf); + + if (!capable(CAP_NET_ADMIN)) + return -EACCES; + + ret = sscanf(buf, "%7s", str_cmd); + if (ret != 1) + return -EINVAL; + ret = 0; + + if (mutex_lock_interruptible(&instance->adsl_state_serialize)) + return -ERESTARTSYS; + + if (!strcmp(str_cmd, "stop") || !strcmp(str_cmd, "restart")) { + ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_STOP, NULL, 0, NULL, 0); + if (ret < 0) { + atm_err(usbatm_instance, "change adsl state:" + " CHIP_ADSL_LINE_STOP returned %d\n", ret); + + ret = -EIO; + } else { + ret = len; + poll = CXPOLL_STOPPED; + } + } + + /* Line status is only updated every second + * and the device appears to only react to + * START/STOP every second too. Wait 1.5s to + * be sure that restart will have an effect. */ + if (!strcmp(str_cmd, "restart")) + msleep(1500); + + if (!strcmp(str_cmd, "start") || !strcmp(str_cmd, "restart")) { + ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); + if (ret < 0) { + atm_err(usbatm_instance, "change adsl state:" + " CHIP_ADSL_LINE_START returned %d\n", ret); + + ret = -EIO; + } else { + ret = len; + poll = CXPOLL_POLLING; + } + } + + if (!strcmp(str_cmd, "poll")) { + ret = len; + poll = CXPOLL_POLLING; + } + + if (ret == 0) { + ret = -EINVAL; + poll = -1; + } + + if (poll == CXPOLL_POLLING) { + mutex_lock(&instance->poll_state_serialize); + switch (instance->poll_state) { + case CXPOLL_STOPPED: + /* start polling */ + instance->poll_state = CXPOLL_POLLING; + break; + + case CXPOLL_STOPPING: + /* abort stop request */ + instance->poll_state = CXPOLL_POLLING; + case CXPOLL_POLLING: + case CXPOLL_SHUTDOWN: + /* don't start polling */ + poll = -1; + } + mutex_unlock(&instance->poll_state_serialize); + } else if (poll == CXPOLL_STOPPED) { + mutex_lock(&instance->poll_state_serialize); + /* request stop */ + if (instance->poll_state == CXPOLL_POLLING) + instance->poll_state = CXPOLL_STOPPING; + mutex_unlock(&instance->poll_state_serialize); + } + + mutex_unlock(&instance->adsl_state_serialize); + + if (poll == CXPOLL_POLLING) + cxacru_poll_status(&instance->poll_work.work); + + return ret; +} + +/* + * All device attributes are included in CXACRU_ALL_FILES + * so that the same list can be used multiple times: + * INIT (define the device attributes) + * CREATE (create all the device files) + * REMOVE (remove all the device files) + * + * With the last two being defined as needed in the functions + * they are used in before calling CXACRU_ALL_FILES() + */ +#define CXACRU_ALL_FILES(_action) \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_RATE, u32, downstream_rate); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_RATE, u32, upstream_rate); \ +CXACRU_ATTR_##_action(CXINF_LINK_STATUS, LINK, link_status); \ +CXACRU_ATTR_##_action(CXINF_LINE_STATUS, LINE, line_status); \ +CXACRU__ATTR_##_action( mac_address); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_SNR_MARGIN, dB, upstream_snr_margin); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_SNR_MARGIN, dB, downstream_snr_margin); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_ATTENUATION, dB, upstream_attenuation); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_ATTENUATION, dB, downstream_attenuation); \ +CXACRU_ATTR_##_action(CXINF_TRANSMITTER_POWER, s8, transmitter_power); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_BITS_PER_FRAME, u32, upstream_bits_per_frame); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_BITS_PER_FRAME, u32, downstream_bits_per_frame); \ +CXACRU_ATTR_##_action(CXINF_STARTUP_ATTEMPTS, u32, startup_attempts); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_CRC_ERRORS, u32, upstream_crc_errors); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_CRC_ERRORS, u32, downstream_crc_errors); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_FEC_ERRORS, u32, upstream_fec_errors); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_FEC_ERRORS, u32, downstream_fec_errors); \ +CXACRU_ATTR_##_action(CXINF_UPSTREAM_HEC_ERRORS, u32, upstream_hec_errors); \ +CXACRU_ATTR_##_action(CXINF_DOWNSTREAM_HEC_ERRORS, u32, downstream_hec_errors); \ +CXACRU_ATTR_##_action(CXINF_LINE_STARTABLE, bool, line_startable); \ +CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \ +CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \ +CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \ +CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \ +CXACRU_CMD_##_action( adsl_state); + +CXACRU_ALL_FILES(INIT); + /* the following three functions are stolen from drivers/usb/core/message.c */ static void cxacru_blocking_completion(struct urb *urb) { @@ -347,8 +629,6 @@ static int cxacru_card_status(struct cxacru_data *instance) return 0; } -static void cxacru_poll_status(struct work_struct *work); - static int cxacru_atm_start(struct usbatm_data *usbatm_instance, struct atm_dev *atm_dev) { @@ -357,6 +637,7 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, struct atm_dev *atm_dev = usbatm_instance->atm_dev; */ int ret; + int start_polling = 1; dbg("cxacru_atm_start"); @@ -369,14 +650,35 @@ static int cxacru_atm_start(struct usbatm_data *usbatm_instance, } /* start ADSL */ + mutex_lock(&instance->adsl_state_serialize); ret = cxacru_cm(instance, CM_REQUEST_CHIP_ADSL_LINE_START, NULL, 0, NULL, 0); if (ret < 0) { atm_err(usbatm_instance, "cxacru_atm_start: CHIP_ADSL_LINE_START returned %d\n", ret); + mutex_unlock(&instance->adsl_state_serialize); return ret; } /* Start status polling */ - cxacru_poll_status(&instance->poll_work.work); + mutex_lock(&instance->poll_state_serialize); + switch (instance->poll_state) { + case CXPOLL_STOPPED: + /* start polling */ + instance->poll_state = CXPOLL_POLLING; + break; + + case CXPOLL_STOPPING: + /* abort stop request */ + instance->poll_state = CXPOLL_POLLING; + case CXPOLL_POLLING: + case CXPOLL_SHUTDOWN: + /* don't start polling */ + start_polling = 0; + } + mutex_unlock(&instance->poll_state_serialize); + mutex_unlock(&instance->adsl_state_serialize); + + if (start_polling) + cxacru_poll_status(&instance->poll_work.work); return 0; } @@ -387,14 +689,46 @@ static void cxacru_poll_status(struct work_struct *work) u32 buf[CXINF_MAX] = {}; struct usbatm_data *usbatm = instance->usbatm; struct atm_dev *atm_dev = usbatm->atm_dev; + int keep_polling = 1; int ret; ret = cxacru_cm_get_array(instance, CM_REQUEST_CARD_INFO_GET, buf, CXINF_MAX); if (ret < 0) { - atm_warn(usbatm, "poll status: error %d\n", ret); + if (ret != -ESHUTDOWN) + atm_warn(usbatm, "poll status: error %d\n", ret); + + mutex_lock(&instance->poll_state_serialize); + if (instance->poll_state != CXPOLL_SHUTDOWN) { + instance->poll_state = CXPOLL_STOPPED; + + if (ret != -ESHUTDOWN) + atm_warn(usbatm, "polling disabled, set adsl_state" + " to 'start' or 'poll' to resume\n"); + } + mutex_unlock(&instance->poll_state_serialize); goto reschedule; } + memcpy(instance->card_info, buf, sizeof(instance->card_info)); + + if (instance->adsl_status != buf[CXINF_LINE_STARTABLE]) { + instance->adsl_status = buf[CXINF_LINE_STARTABLE]; + + switch (instance->adsl_status) { + case 0: + atm_printk(KERN_INFO, usbatm, "ADSL state: running\n"); + break; + + case 1: + atm_printk(KERN_INFO, usbatm, "ADSL state: stopped\n"); + break; + + default: + atm_printk(KERN_INFO, usbatm, "Unknown adsl status %02x\n", instance->adsl_status); + break; + } + } + if (instance->line_status == buf[CXINF_LINE_STATUS]) goto reschedule; @@ -449,7 +783,20 @@ static void cxacru_poll_status(struct work_struct *work) break; } reschedule: - schedule_delayed_work(&instance->poll_work, msecs_to_jiffies(POLL_INTERVAL)); + + mutex_lock(&instance->poll_state_serialize); + if (instance->poll_state == CXPOLL_STOPPING && + instance->adsl_status == 1 && /* stopped */ + instance->line_status == 0) /* down */ + instance->poll_state = CXPOLL_STOPPED; + + if (instance->poll_state == CXPOLL_STOPPED) + keep_polling = 0; + mutex_unlock(&instance->poll_state_serialize); + + if (keep_polling) + schedule_delayed_work(&instance->poll_work, + round_jiffies_relative(POLL_INTERVAL*HZ)); } static int cxacru_fw(struct usb_device *usb_dev, enum cxacru_fw_request fw, @@ -684,6 +1031,14 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, instance->usbatm = usbatm_instance; instance->modem_type = (struct cxacru_modem_type *) id->driver_info; + memset(instance->card_info, 0, sizeof(instance->card_info)); + + mutex_init(&instance->poll_state_serialize); + instance->poll_state = CXPOLL_STOPPED; + instance->line_status = -1; + instance->adsl_status = -1; + + mutex_init(&instance->adsl_state_serialize); instance->rcv_buf = (u8 *) __get_free_page(GFP_KERNEL); if (!instance->rcv_buf) { @@ -710,6 +1065,13 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, goto fail; } + #define CXACRU_DEVICE_CREATE_FILE(_name) \ + ret = device_create_file(&intf->dev, &dev_attr_##_name); \ + if (unlikely(ret)) \ + goto fail_sysfs; + CXACRU_ALL_FILES(CREATE); + #undef CXACRU_DEVICE_CREATE_FILE + usb_fill_int_urb(instance->rcv_urb, usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD), instance->rcv_buf, PAGE_SIZE, @@ -730,6 +1092,14 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance, return 0; + fail_sysfs: + dbg("cxacru_bind: device_create_file failed (%d)\n", ret); + + #define CXACRU_DEVICE_REMOVE_FILE(_name) \ + device_remove_file(&intf->dev, &dev_attr_##_name); + CXACRU_ALL_FILES(REMOVE); + #undef CXACRU_DEVICE_REVOVE_FILE + fail: free_page((unsigned long) instance->snd_buf); free_page((unsigned long) instance->rcv_buf); @@ -744,6 +1114,7 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance, struct usb_interface *intf) { struct cxacru_data *instance = usbatm_instance->driver_data; + int is_polling = 1; dbg("cxacru_unbind entered"); @@ -752,8 +1123,20 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance, return; } - while (!cancel_delayed_work(&instance->poll_work)) - flush_scheduled_work(); + mutex_lock(&instance->poll_state_serialize); + BUG_ON(instance->poll_state == CXPOLL_SHUTDOWN); + + /* ensure that status polling continues unless + * it has already stopped */ + if (instance->poll_state == CXPOLL_STOPPED) + is_polling = 0; + + /* stop polling from being stopped or started */ + instance->poll_state = CXPOLL_SHUTDOWN; + mutex_unlock(&instance->poll_state_serialize); + + if (is_polling) + cancel_rearming_delayed_work(&instance->poll_work); usb_kill_urb(instance->snd_urb); usb_kill_urb(instance->rcv_urb); @@ -762,6 +1145,12 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance, free_page((unsigned long) instance->snd_buf); free_page((unsigned long) instance->rcv_buf); + + #define CXACRU_DEVICE_REMOVE_FILE(_name) \ + device_remove_file(&intf->dev, &dev_attr_##_name); + CXACRU_ALL_FILES(REMOVE); + #undef CXACRU_DEVICE_REVOVE_FILE + kfree(instance); usbatm_instance->driver_data = NULL; diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index d3e2c5f90a26..b3f779f5933a 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -274,6 +274,9 @@ static void usbatm_complete(struct urb *urb) (!(channel->usbatm->flags & UDSL_IGNORE_EILSEQ) || urb->status != -EILSEQ )) { + if (urb->status == -ESHUTDOWN) + return; + if (printk_ratelimit()) atm_warn(channel->usbatm, "%s: urb 0x%p failed (%d)!\n", __func__, urb, urb->status); @@ -968,6 +971,14 @@ static int usbatm_atm_init(struct usbatm_data *instance) /* temp init ATM device, set to 128kbit */ atm_dev->link_rate = 128 * 1000 / 424; + ret = sysfs_create_link(&atm_dev->class_dev.kobj, + &instance->usb_intf->dev.kobj, "device"); + if (ret) { + atm_err(instance, "%s: sysfs_create_link failed: %d\n", + __func__, ret); + goto fail_sysfs; + } + if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) { atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret); goto fail; @@ -986,6 +997,8 @@ static int usbatm_atm_init(struct usbatm_data *instance) return 0; fail: + sysfs_remove_link(&atm_dev->class_dev.kobj, "device"); + fail_sysfs: instance->atm_dev = NULL; atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */ return ret; @@ -1318,8 +1331,10 @@ void usbatm_usb_disconnect(struct usb_interface *intf) kfree(instance->cell_buf); /* ATM finalize */ - if (instance->atm_dev) + if (instance->atm_dev) { + sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device"); atm_dev_deregister(instance->atm_dev); + } usbatm_put_instance(instance); /* taken in usbatm_usb_probe */ } diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 31ae661e586a..14de3b1b6a20 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -212,7 +212,41 @@ static int acm_write_start(struct acm *acm) } return rc; } +/* + * attributes exported through sysfs + */ +static ssize_t show_caps +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + return sprintf(buf, "%d", acm->ctrl_caps); +} +static DEVICE_ATTR(bmCapabilities, S_IRUGO, show_caps, NULL); + +static ssize_t show_country_codes +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + memcpy(buf, acm->country_codes, acm->country_code_size); + return acm->country_code_size; +} + +static DEVICE_ATTR(wCountryCodes, S_IRUGO, show_country_codes, NULL); + +static ssize_t show_country_rel_date +(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct acm *acm = usb_get_intfdata(intf); + + return sprintf(buf, "%d", acm->country_rel_date); +} +static DEVICE_ATTR(iCountryCodeRelDate, S_IRUGO, show_country_rel_date, NULL); /* * Interrupt handlers for various ACM device responses */ @@ -514,6 +548,7 @@ static void acm_tty_unregister(struct acm *acm) usb_free_urb(acm->writeurb); for (i = 0; i < nr; i++) usb_free_urb(acm->ru[i].urb); + kfree(acm->country_codes); kfree(acm); } @@ -761,6 +796,7 @@ static int acm_probe (struct usb_interface *intf, const struct usb_device_id *id) { struct usb_cdc_union_desc *union_header = NULL; + struct usb_cdc_country_functional_desc *cfd = NULL; char *buffer = intf->altsetting->extra; int buflen = intf->altsetting->extralen; struct usb_interface *control_interface; @@ -824,8 +860,9 @@ static int acm_probe (struct usb_interface *intf, union_header = (struct usb_cdc_union_desc *) buffer; break; - case USB_CDC_COUNTRY_TYPE: /* maybe somehow export */ - break; /* for now we ignore it */ + case USB_CDC_COUNTRY_TYPE: /* export through sysfs*/ + cfd = (struct usb_cdc_country_functional_desc *)buffer; + break; case USB_CDC_HEADER_TYPE: /* maybe check version */ break; /* for now we ignore it */ case USB_CDC_ACM_TYPE: @@ -983,6 +1020,34 @@ skip_normal_probe: goto alloc_fail7; } + usb_set_intfdata (intf, acm); + + i = device_create_file(&intf->dev, &dev_attr_bmCapabilities); + if (i < 0) + goto alloc_fail8; + + if (cfd) { /* export the country data */ + acm->country_codes = kmalloc(cfd->bLength - 4, GFP_KERNEL); + if (!acm->country_codes) + goto skip_countries; + acm->country_code_size = cfd->bLength - 4; + memcpy(acm->country_codes, (u8 *)&cfd->wCountyCode0, cfd->bLength - 4); + acm->country_rel_date = cfd->iCountryCodeRelDate; + + i = device_create_file(&intf->dev, &dev_attr_wCountryCodes); + if (i < 0) { + kfree(acm->country_codes); + goto skip_countries; + } + + i = device_create_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + if (i < 0) { + kfree(acm->country_codes); + goto skip_countries; + } + } + +skip_countries: usb_fill_int_urb(acm->ctrlurb, usb_dev, usb_rcvintpipe(usb_dev, epctrl->bEndpointAddress), acm->ctrl_buffer, ctrlsize, acm_ctrl_irq, acm, epctrl->bInterval); acm->ctrlurb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; @@ -1006,9 +1071,10 @@ skip_normal_probe: tty_register_device(acm_tty_driver, minor, &control_interface->dev); acm_table[minor] = acm; - usb_set_intfdata (intf, acm); - return 0; + return 0; +alloc_fail8: + usb_free_urb(acm->writeurb); alloc_fail7: for (i = 0; i < num_rx_buf; i++) usb_buffer_free(usb_dev, acm->readsize, acm->rb[i].base, acm->rb[i].dma); @@ -1027,7 +1093,7 @@ alloc_fail: static void acm_disconnect(struct usb_interface *intf) { - struct acm *acm = usb_get_intfdata (intf); + struct acm *acm = usb_get_intfdata(intf); struct usb_device *usb_dev = interface_to_usbdev(intf); int i; @@ -1041,6 +1107,11 @@ static void acm_disconnect(struct usb_interface *intf) mutex_unlock(&open_mutex); return; } + if (acm->country_codes){ + device_remove_file(&intf->dev, &dev_attr_wCountryCodes); + device_remove_file(&intf->dev, &dev_attr_iCountryCodeRelDate); + } + device_remove_file(&intf->dev, &dev_attr_bmCapabilities); acm->dev = NULL; usb_set_intfdata(acm->control, NULL); usb_set_intfdata(acm->data, NULL); diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index 1bcaea32cfc1..09f7765dbf8d 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -91,6 +91,9 @@ struct acm { struct urb *ctrlurb, *writeurb; /* urbs */ u8 *ctrl_buffer; /* buffers of urbs */ dma_addr_t ctrl_dma; /* dma handles of buffers */ + u8 *country_codes; /* country codes from device */ + unsigned int country_code_size; /* size of this buffer */ + unsigned int country_rel_date; /* release date of version */ struct acm_wb wb[ACM_NW]; struct acm_ru ru[ACM_NR]; struct acm_rb rb[ACM_NR]; diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 2fc0f88a3d86..f493fb1eaa27 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -31,7 +31,30 @@ config USB_DEVICEFS For the format of the various /proc/bus/usb/ files, please read <file:Documentation/usb/proc_usb_info.txt>. - Most users want to say Y here. + Usbfs files can't handle Access Control Lists (ACL), which are the + default way to grant access to USB devices for untrusted users of a + desktop system. The usbfs functionality is replaced by real + device-nodes managed by udev. These nodes live in /dev/bus/usb and + are used by libusb. + +config USB_DEVICE_CLASS + bool "USB device class-devices (DEPRECATED)" + depends on USB + default n + ---help--- + Userspace access to USB devices is granted by device-nodes exported + directly from the usbdev in sysfs. Old versions of the driver + core and udev needed additional class devices to export device nodes. + + These additional devices are difficult to handle in userspace, if + information about USB interfaces must be available. One device contains + the device node, the other device contains the interface data. Both + devices are at the same level in sysfs (siblings) and one can't access + the other. The device node created directly by the usbdev is the parent + device of the interface and therefore easily accessible from the interface + event. + + This option provides backward compatibility if needed. config USB_DYNAMIC_MINORS bool "Dynamic USB minor allocation (EXPERIMENTAL)" diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index fc3545ddb06e..927a181120a9 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -57,7 +57,6 @@ #define USB_MAXBUS 64 #define USB_DEVICE_MAX USB_MAXBUS * 128 -static struct class *usb_device_class; /* Mutual exclusion for removal, open, and release */ DEFINE_MUTEX(usbfs_mutex); @@ -514,22 +513,25 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, unsig return ret; } -static struct usb_device *usbdev_lookup_minor(int minor) +static int __match_minor(struct device *dev, void *data) { - struct device *device; - struct usb_device *udev = NULL; + int minor = *((int *)data); - down(&usb_device_class->sem); - list_for_each_entry(device, &usb_device_class->devices, node) { - if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) { - udev = device->platform_data; - break; - } - } - up(&usb_device_class->sem); + if (dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) + return 1; + return 0; +} - return udev; -}; +static struct usb_device *usbdev_lookup_by_minor(int minor) +{ + struct device *dev; + + dev = bus_find_device(&usb_bus_type, NULL, &minor, __match_minor); + if (!dev) + return NULL; + put_device(dev); + return container_of(dev, struct usb_device, dev); +} /* * file operations @@ -548,11 +550,14 @@ static int usbdev_open(struct inode *inode, struct file *file) goto out; ret = -ENOENT; - /* check if we are called from a real node or usbfs */ + /* usbdev device-node */ if (imajor(inode) == USB_DEVICE_MAJOR) - dev = usbdev_lookup_minor(iminor(inode)); + dev = usbdev_lookup_by_minor(iminor(inode)); +#ifdef CONFIG_USB_DEVICEFS + /* procfs file */ if (!dev) dev = inode->i_private; +#endif if (!dev) goto out; ret = usb_autoresume_device(dev); @@ -575,7 +580,7 @@ static int usbdev_open(struct inode *inode, struct file *file) ps->disccontext = NULL; ps->ifclaimed = 0; security_task_getsecid(current, &ps->secid); - wmb(); + smp_wmb(); list_add_tail(&ps->list, &dev->filelist); file->private_data = ps; out: @@ -1570,7 +1575,7 @@ static unsigned int usbdev_poll(struct file *file, struct poll_table_struct *wai return mask; } -const struct file_operations usbfs_device_file_operations = { +const struct file_operations usbdev_file_operations = { .llseek = usbdev_lseek, .read = usbdev_read, .poll = usbdev_poll, @@ -1579,50 +1584,53 @@ const struct file_operations usbfs_device_file_operations = { .release = usbdev_release, }; -static int usbdev_add(struct usb_device *dev) +#ifdef CONFIG_USB_DEVICE_CLASS +static struct class *usb_classdev_class; + +static int usb_classdev_add(struct usb_device *dev) { int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1); - dev->usbfs_dev = device_create(usb_device_class, &dev->dev, + dev->usb_classdev = device_create(usb_classdev_class, &dev->dev, MKDEV(USB_DEVICE_MAJOR, minor), "usbdev%d.%d", dev->bus->busnum, dev->devnum); - if (IS_ERR(dev->usbfs_dev)) - return PTR_ERR(dev->usbfs_dev); + if (IS_ERR(dev->usb_classdev)) + return PTR_ERR(dev->usb_classdev); - dev->usbfs_dev->platform_data = dev; return 0; } -static void usbdev_remove(struct usb_device *dev) +static void usb_classdev_remove(struct usb_device *dev) { - device_unregister(dev->usbfs_dev); + device_unregister(dev->usb_classdev); } -static int usbdev_notify(struct notifier_block *self, unsigned long action, - void *dev) +static int usb_classdev_notify(struct notifier_block *self, + unsigned long action, void *dev) { switch (action) { case USB_DEVICE_ADD: - if (usbdev_add(dev)) + if (usb_classdev_add(dev)) return NOTIFY_BAD; break; case USB_DEVICE_REMOVE: - usbdev_remove(dev); + usb_classdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usbdev_notify, + .notifier_call = usb_classdev_notify, }; +#endif static struct cdev usb_device_cdev = { .kobj = {.name = "usb_device", }, .owner = THIS_MODULE, }; -int __init usbdev_init(void) +int __init usb_devio_init(void) { int retval; @@ -1632,38 +1640,38 @@ int __init usbdev_init(void) err("unable to register minors for usb_device"); goto out; } - cdev_init(&usb_device_cdev, &usbfs_device_file_operations); + cdev_init(&usb_device_cdev, &usbdev_file_operations); retval = cdev_add(&usb_device_cdev, USB_DEVICE_DEV, USB_DEVICE_MAX); if (retval) { err("unable to get usb_device major %d", USB_DEVICE_MAJOR); goto error_cdev; } - usb_device_class = class_create(THIS_MODULE, "usb_device"); - if (IS_ERR(usb_device_class)) { +#ifdef CONFIG_USB_DEVICE_CLASS + usb_classdev_class = class_create(THIS_MODULE, "usb_device"); + if (IS_ERR(usb_classdev_class)) { err("unable to register usb_device class"); - retval = PTR_ERR(usb_device_class); - goto error_class; + retval = PTR_ERR(usb_classdev_class); + cdev_del(&usb_device_cdev); + usb_classdev_class = NULL; + goto out; } usb_register_notify(&usbdev_nb); - +#endif out: return retval; -error_class: - usb_device_class = NULL; - cdev_del(&usb_device_cdev); - error_cdev: unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); goto out; } -void usbdev_cleanup(void) +void usb_devio_cleanup(void) { +#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); - class_destroy(usb_device_class); + class_destroy(usb_classdev_class); +#endif cdev_del(&usb_device_cdev); unregister_chrdev_region(USB_DEVICE_DEV, USB_DEVICE_MAX); } - diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e6dd2b9210f6..b9f7f90aef82 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -574,23 +574,10 @@ static int usb_device_match(struct device *dev, struct device_driver *drv) } #ifdef CONFIG_HOTPLUG - -/* - * This sends an uevent to userspace, typically helping to load driver - * or other modules, configure the device, and more. Drivers can provide - * a MODULE_DEVICE_TABLE to help with module loading subtasks. - * - * We're called either from khubd (the typical case) or from root hub - * (init, kapmd, modprobe, rmmod, etc), but the agents need to handle - * delays in event delivery. Use sysfs (and DEVPATH) to make sure the - * device (and this configuration!) are still present. - */ static int usb_uevent(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size) { - struct usb_interface *intf; struct usb_device *usb_dev; - struct usb_host_interface *alt; int i = 0; int length = 0; @@ -600,13 +587,11 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, /* driver is often null here; dev_dbg() would oops */ pr_debug ("usb %s: uevent\n", dev->bus_id); - if (is_usb_device(dev)) { + if (is_usb_device(dev)) usb_dev = to_usb_device(dev); - alt = NULL; - } else { - intf = to_usb_interface(dev); + else { + struct usb_interface *intf = to_usb_interface(dev); usb_dev = interface_to_usbdev(intf); - alt = intf->cur_altsetting; } if (usb_dev->devnum < 0) { @@ -621,9 +606,7 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, #ifdef CONFIG_USB_DEVICEFS /* If this is available, userspace programs can directly read * all the device descriptors we don't tell them about. Or - * even act as usermode drivers. - * - * FIXME reduce hardwired intelligence here + * act as usermode drivers. */ if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, @@ -650,44 +633,29 @@ static int usb_uevent(struct device *dev, char **envp, int num_envp, usb_dev->descriptor.bDeviceProtocol)) return -ENOMEM; - if (!is_usb_device(dev)) { - - if (add_uevent_var(envp, num_envp, &i, + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, - "INTERFACE=%d/%d/%d", - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; + "BUSNUM=%03d", + usb_dev->bus->busnum)) + return -ENOMEM; - if (add_uevent_var(envp, num_envp, &i, + if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &length, - "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", - le16_to_cpu(usb_dev->descriptor.idVendor), - le16_to_cpu(usb_dev->descriptor.idProduct), - le16_to_cpu(usb_dev->descriptor.bcdDevice), - usb_dev->descriptor.bDeviceClass, - usb_dev->descriptor.bDeviceSubClass, - usb_dev->descriptor.bDeviceProtocol, - alt->desc.bInterfaceClass, - alt->desc.bInterfaceSubClass, - alt->desc.bInterfaceProtocol)) - return -ENOMEM; - } + "DEVNUM=%03d", + usb_dev->devnum)) + return -ENOMEM; envp[i] = NULL; - return 0; } #else static int usb_uevent(struct device *dev, char **envp, - int num_envp, char *buffer, int buffer_size) + int num_envp, char *buffer, int buffer_size) { return -ENODEV; } - #endif /* CONFIG_HOTPLUG */ /** @@ -872,8 +840,10 @@ static int usb_resume_device(struct usb_device *udev) done: // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); - if (status == 0) + if (status == 0) { + udev->autoresume_disabled = 0; udev->dev.power.power_state.event = PM_EVENT_ON; + } return status; } @@ -962,6 +932,7 @@ static int autosuspend_check(struct usb_device *udev) { int i; struct usb_interface *intf; + unsigned long suspend_time; /* For autosuspend, fail fast if anything is in use or autosuspend * is disabled. Also fail if any interfaces require remote wakeup @@ -970,9 +941,10 @@ static int autosuspend_check(struct usb_device *udev) udev->do_remote_wakeup = device_may_wakeup(&udev->dev); if (udev->pm_usage_cnt > 0) return -EBUSY; - if (!udev->autosuspend_delay) + if (udev->autosuspend_delay < 0 || udev->autosuspend_disabled) return -EPERM; + suspend_time = udev->last_busy + udev->autosuspend_delay; if (udev->actconfig) { for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { intf = udev->actconfig->interface[i]; @@ -988,6 +960,24 @@ static int autosuspend_check(struct usb_device *udev) } } } + + /* If everything is okay but the device hasn't been idle for long + * enough, queue a delayed autosuspend request. + */ + if (time_after(suspend_time, jiffies)) { + if (!timer_pending(&udev->autosuspend.timer)) { + + /* The value of jiffies may change between the + * time_after() comparison above and the subtraction + * below. That's okay; the system behaves sanely + * when a timer is registered for the present moment + * or for the past. + */ + queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, + suspend_time - jiffies); + } + return -EAGAIN; + } return 0; } @@ -1033,26 +1023,25 @@ static int autosuspend_check(struct usb_device *udev) * * This routine can run only in process context. */ -int usb_suspend_both(struct usb_device *udev, pm_message_t msg) +static int usb_suspend_both(struct usb_device *udev, pm_message_t msg) { int status = 0; int i = 0; struct usb_interface *intf; struct usb_device *parent = udev->parent; - cancel_delayed_work(&udev->autosuspend); - if (udev->state == USB_STATE_NOTATTACHED) - return 0; - if (udev->state == USB_STATE_SUSPENDED) - return 0; + if (udev->state == USB_STATE_NOTATTACHED || + udev->state == USB_STATE_SUSPENDED) + goto done; udev->do_remote_wakeup = device_may_wakeup(&udev->dev); if (udev->auto_pm) { status = autosuspend_check(udev); if (status < 0) - return status; + goto done; } + cancel_delayed_work(&udev->autosuspend); /* Suspend all the interfaces and then udev itself */ if (udev->actconfig) { @@ -1077,6 +1066,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) } else if (parent) usb_autosuspend_device(parent); + done: // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; } @@ -1109,7 +1099,7 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg) * * This routine can run only in process context. */ -int usb_resume_both(struct usb_device *udev) +static int usb_resume_both(struct usb_device *udev) { int status = 0; int i; @@ -1117,11 +1107,17 @@ int usb_resume_both(struct usb_device *udev) struct usb_device *parent = udev->parent; cancel_delayed_work(&udev->autosuspend); - if (udev->state == USB_STATE_NOTATTACHED) - return -ENODEV; + if (udev->state == USB_STATE_NOTATTACHED) { + status = -ENODEV; + goto done; + } /* Propagate the resume up the tree, if necessary */ if (udev->state == USB_STATE_SUSPENDED) { + if (udev->auto_pm && udev->autoresume_disabled) { + status = -EPERM; + goto done; + } if (parent) { status = usb_autoresume_device(parent); if (status == 0) { @@ -1167,6 +1163,7 @@ int usb_resume_both(struct usb_device *udev) } } + done: // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status); return status; } @@ -1181,20 +1178,34 @@ static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt) int status = 0; usb_pm_lock(udev); + udev->auto_pm = 1; udev->pm_usage_cnt += inc_usage_cnt; WARN_ON(udev->pm_usage_cnt < 0); if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) { - udev->auto_pm = 1; - status = usb_resume_both(udev); + if (udev->state == USB_STATE_SUSPENDED) + status = usb_resume_both(udev); if (status != 0) udev->pm_usage_cnt -= inc_usage_cnt; - } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - udev->autosuspend_delay); + else if (inc_usage_cnt) + udev->last_busy = jiffies; + } else if (inc_usage_cnt <= 0 && udev->pm_usage_cnt <= 0) { + if (inc_usage_cnt) + udev->last_busy = jiffies; + status = usb_suspend_both(udev, PMSG_SUSPEND); + } usb_pm_unlock(udev); return status; } +/* usb_autosuspend_work - callback routine to autosuspend a USB device */ +void usb_autosuspend_work(struct work_struct *work) +{ + struct usb_device *udev = + container_of(work, struct usb_device, autosuspend.work); + + usb_autopm_do_device(udev, 0); +} + /** * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces * @udev: the usb_device to autosuspend @@ -1286,15 +1297,20 @@ static int usb_autopm_do_interface(struct usb_interface *intf, if (intf->condition == USB_INTERFACE_UNBOUND) status = -ENODEV; else { + udev->auto_pm = 1; intf->pm_usage_cnt += inc_usage_cnt; if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) { - udev->auto_pm = 1; - status = usb_resume_both(udev); + if (udev->state == USB_STATE_SUSPENDED) + status = usb_resume_both(udev); if (status != 0) intf->pm_usage_cnt -= inc_usage_cnt; - } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0) - queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend, - udev->autosuspend_delay); + else if (inc_usage_cnt) + udev->last_busy = jiffies; + } else if (inc_usage_cnt <= 0 && intf->pm_usage_cnt <= 0) { + if (inc_usage_cnt) + udev->last_busy = jiffies; + status = usb_suspend_both(udev, PMSG_SUSPEND); + } } usb_pm_unlock(udev); return status; @@ -1353,11 +1369,14 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface); * or @intf is unbound. A typical example would be a character-device * driver when its device file is opened. * - * The routine increments @intf's usage counter. So long as the counter - * is greater than 0, autosuspend will not be allowed for @intf or its - * usb_device. When the driver is finished using @intf it should call - * usb_autopm_put_interface() to decrement the usage counter and queue - * a delayed autosuspend request (if the counter is <= 0). + * + * The routine increments @intf's usage counter. (However if the + * autoresume fails then the counter is re-decremented.) So long as the + * counter is greater than 0, autosuspend will not be allowed for @intf + * or its usb_device. When the driver is finished using @intf it should + * call usb_autopm_put_interface() to decrement the usage counter and + * queue a delayed autosuspend request (if the counter is <= 0). + * * * Note that @intf->pm_usage_cnt is owned by the interface driver. The * core will not change its value other than the increment and decrement @@ -1405,50 +1424,96 @@ int usb_autopm_set_interface(struct usb_interface *intf) } EXPORT_SYMBOL_GPL(usb_autopm_set_interface); +#else + +void usb_autosuspend_work(struct work_struct *work) +{} + #endif /* CONFIG_USB_SUSPEND */ -static int usb_suspend(struct device *dev, pm_message_t message) +/** + * usb_external_suspend_device - external suspend of a USB device and its interfaces + * @udev: the usb_device to suspend + * @msg: Power Management message describing this state transition + * + * This routine handles external suspend requests: ones not generated + * internally by a USB driver (autosuspend) but rather coming from the user + * (via sysfs) or the PM core (system sleep). The suspend will be carried + * out regardless of @udev's usage counter or those of its interfaces, + * and regardless of whether or not remote wakeup is enabled. Of course, + * interface drivers still have the option of failing the suspend (if + * there are unsuspended children, for example). + * + * The caller must hold @udev's device lock. + */ +int usb_external_suspend_device(struct usb_device *udev, pm_message_t msg) { int status; - if (is_usb_device(dev)) { - struct usb_device *udev = to_usb_device(dev); - - usb_pm_lock(udev); - udev->auto_pm = 0; - status = usb_suspend_both(udev, message); - usb_pm_unlock(udev); - } else - status = 0; + usb_pm_lock(udev); + udev->auto_pm = 0; + status = usb_suspend_both(udev, msg); + usb_pm_unlock(udev); return status; } -static int usb_resume(struct device *dev) +/** + * usb_external_resume_device - external resume of a USB device and its interfaces + * @udev: the usb_device to resume + * + * This routine handles external resume requests: ones not generated + * internally by a USB driver (autoresume) but rather coming from the user + * (via sysfs), the PM core (system resume), or the device itself (remote + * wakeup). @udev's usage counter is unaffected. + * + * The caller must hold @udev's device lock. + */ +int usb_external_resume_device(struct usb_device *udev) { int status; - if (is_usb_device(dev)) { - struct usb_device *udev = to_usb_device(dev); - - usb_pm_lock(udev); - udev->auto_pm = 0; - status = usb_resume_both(udev); - usb_pm_unlock(udev); + usb_pm_lock(udev); + udev->auto_pm = 0; + status = usb_resume_both(udev); + usb_pm_unlock(udev); - /* Rebind drivers that had no suspend method? */ - } else - status = 0; + /* Now that the device is awake, we can start trying to autosuspend + * it again. */ + if (status == 0) + usb_try_autosuspend_device(udev); return status; } +static int usb_suspend(struct device *dev, pm_message_t message) +{ + if (!is_usb_device(dev)) /* Ignore PM for interfaces */ + return 0; + return usb_external_suspend_device(to_usb_device(dev), message); +} + +static int usb_resume(struct device *dev) +{ + struct usb_device *udev; + + if (!is_usb_device(dev)) /* Ignore PM for interfaces */ + return 0; + udev = to_usb_device(dev); + if (udev->autoresume_disabled) + return -EPERM; + return usb_external_resume_device(udev); +} + +#else + +#define usb_suspend NULL +#define usb_resume NULL + #endif /* CONFIG_PM */ struct bus_type usb_bus_type = { .name = "usb", .match = usb_device_match, .uevent = usb_uevent, -#ifdef CONFIG_PM .suspend = usb_suspend, .resume = usb_resume, -#endif }; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index b26c19e8d19f..40cf882293e6 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -37,6 +37,7 @@ #include <asm/irq.h> #include <asm/byteorder.h> #include <linux/platform_device.h> +#include <linux/workqueue.h> #include <linux/usb.h> @@ -544,6 +545,8 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd) unsigned long flags; char buffer[4]; /* Any root hubs with > 31 ports? */ + if (unlikely(!hcd->rh_registered)) + return; if (!hcd->uses_new_polling && !hcd->status_urb) return; @@ -1296,14 +1299,26 @@ int hcd_bus_resume (struct usb_bus *bus) return status; } +/* Workqueue routine for root-hub remote wakeup */ +static void hcd_resume_work(struct work_struct *work) +{ + struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work); + struct usb_device *udev = hcd->self.root_hub; + + usb_lock_device(udev); + usb_mark_last_busy(udev); + usb_external_resume_device(udev); + usb_unlock_device(udev); +} + /** * usb_hcd_resume_root_hub - called by HCD to resume its root hub * @hcd: host controller for this root hub * * The USB host controller calls this function when its root hub is * suspended (with the remote wakeup feature enabled) and a remote - * wakeup request is received. It queues a request for khubd to - * resume the root hub (that is, manage its downstream ports again). + * wakeup request is received. The routine submits a workqueue request + * to resume the root hub (that is, manage its downstream ports again). */ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) { @@ -1311,7 +1326,7 @@ void usb_hcd_resume_root_hub (struct usb_hcd *hcd) spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->rh_registered) - usb_resume_root_hub (hcd->self.root_hub); + queue_work(ksuspend_usb_wq, &hcd->wakeup_work); spin_unlock_irqrestore (&hcd_root_hub_lock, flags); } EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub); @@ -1500,6 +1515,9 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, init_timer(&hcd->rh_timer); hcd->rh_timer.function = rh_timer_func; hcd->rh_timer.data = (unsigned long) hcd; +#ifdef CONFIG_PM + INIT_WORK(&hcd->wakeup_work, hcd_resume_work); +#endif hcd->driver = driver; hcd->product_desc = (driver->product_desc) ? driver->product_desc : @@ -1666,16 +1684,20 @@ void usb_remove_hcd(struct usb_hcd *hcd) hcd->rh_registered = 0; spin_unlock_irq (&hcd_root_hub_lock); +#ifdef CONFIG_PM + flush_workqueue(ksuspend_usb_wq); +#endif + mutex_lock(&usb_bus_list_lock); usb_disconnect(&hcd->self.root_hub); mutex_unlock(&usb_bus_list_lock); - hcd->poll_rh = 0; - del_timer_sync(&hcd->rh_timer); - hcd->driver->stop(hcd); hcd->state = HC_STATE_HALT; + hcd->poll_rh = 0; + del_timer_sync(&hcd->rh_timer); + if (hcd->irq >= 0) free_irq(hcd->irq, hcd); usb_deregister_bus(&hcd->self); diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 2a269ca20517..ef50fa494e47 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -68,6 +68,9 @@ struct usb_hcd { struct timer_list rh_timer; /* drives root-hub polling */ struct urb *status_urb; /* the current status urb */ +#ifdef CONFIG_PM + struct work_struct wakeup_work; /* for remote wakeup */ +#endif /* * hardware info/state diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 7a6028599d62..bde29ab2b504 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1367,11 +1367,15 @@ int usb_new_device(struct usb_device *udev) } #endif + /* export the usbdev device-node for libusb */ + udev->dev.devt = MKDEV(USB_DEVICE_MAJOR, + (((udev->bus->busnum-1) * 128) + (udev->devnum-1))); + /* Register the device. The device driver is responsible - * for adding the device files to usbfs and sysfs and for - * configuring the device. + * for adding the device files to sysfs and for configuring + * the device. */ - err = device_add (&udev->dev); + err = device_add(&udev->dev); if (err) { dev_err(&udev->dev, "can't device_add, error %d\n", err); goto fail; @@ -1855,12 +1859,8 @@ static int remote_wakeup(struct usb_device *udev) usb_lock_device(udev); if (udev->state == USB_STATE_SUSPENDED) { dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-"); - status = usb_autoresume_device(udev); - - /* Give the interface drivers a chance to do something, - * then autosuspend the device again. */ - if (status == 0) - usb_autosuspend_device(udev); + usb_mark_last_busy(udev); + status = usb_external_resume_device(udev); } usb_unlock_device(udev); return status; @@ -1984,13 +1984,6 @@ static inline int remote_wakeup(struct usb_device *udev) #define hub_resume NULL #endif -void usb_resume_root_hub(struct usb_device *hdev) -{ - struct usb_hub *hub = hdev_to_hub(hdev); - - kick_khubd(hub); -} - /* USB 2.0 spec, 7.1.7.3 / fig 7-29: * diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 11dad22da41c..cddfc62c4611 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -662,7 +662,7 @@ static void usbfs_add_device(struct usb_device *dev) sprintf (name, "%03d", dev->devnum); dev->usbfs_dentry = fs_create_file (name, devmode | S_IFREG, dev->bus->usbfs_dentry, dev, - &usbfs_device_file_operations, + &usbdev_file_operations, devuid, devgid); if (dev->usbfs_dentry == NULL) { err ("error creating usbfs device entry"); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index c359ccb32998..b7434787db5f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -412,10 +412,24 @@ int usb_sg_init ( io->urbs [i]->status = -EINPROGRESS; io->urbs [i]->actual_length = 0; + /* + * Some systems need to revert to PIO when DMA is temporarily + * unavailable. For their sakes, both transfer_buffer and + * transfer_dma are set when possible. However this can only + * work on systems without HIGHMEM, since DMA buffers located + * in high memory are not directly addressable by the CPU for + * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL + * to prevent stale pointers and to help spot bugs. + */ if (dma) { - /* hc may use _only_ transfer_dma */ io->urbs [i]->transfer_dma = sg_dma_address (sg + i); len = sg_dma_len (sg + i); +#ifdef CONFIG_HIGHMEM + io->urbs[i]->transfer_buffer = NULL; +#else + io->urbs[i]->transfer_buffer = + page_address(sg[i].page) + sg[i].offset; +#endif } else { /* hc may use _only_ transfer_buffer */ io->urbs [i]->transfer_buffer = @@ -1305,7 +1319,7 @@ int usb_reset_configuration(struct usb_device *dev) return 0; } -static void release_interface(struct device *dev) +void usb_release_interface(struct device *dev) { struct usb_interface *intf = to_usb_interface(dev); struct usb_interface_cache *intfc = @@ -1315,6 +1329,67 @@ static void release_interface(struct device *dev) kfree(intf); } +#ifdef CONFIG_HOTPLUG +static int usb_if_uevent(struct device *dev, char **envp, int num_envp, + char *buffer, int buffer_size) +{ + struct usb_device *usb_dev; + struct usb_interface *intf; + struct usb_host_interface *alt; + int i = 0; + int length = 0; + + if (!dev) + return -ENODEV; + + /* driver is often null here; dev_dbg() would oops */ + pr_debug ("usb %s: uevent\n", dev->bus_id); + + intf = to_usb_interface(dev); + usb_dev = interface_to_usbdev(intf); + alt = intf->cur_altsetting; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "INTERFACE=%d/%d/%d", + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X", + le16_to_cpu(usb_dev->descriptor.idVendor), + le16_to_cpu(usb_dev->descriptor.idProduct), + le16_to_cpu(usb_dev->descriptor.bcdDevice), + usb_dev->descriptor.bDeviceClass, + usb_dev->descriptor.bDeviceSubClass, + usb_dev->descriptor.bDeviceProtocol, + alt->desc.bInterfaceClass, + alt->desc.bInterfaceSubClass, + alt->desc.bInterfaceProtocol)) + return -ENOMEM; + + envp[i] = NULL; + return 0; +} + +#else + +static int usb_if_uevent(struct device *dev, char **envp, + int num_envp, char *buffer, int buffer_size) +{ + return -ENODEV; +} +#endif /* CONFIG_HOTPLUG */ + +struct device_type usb_if_device_type = { + .name = "usb_interface", + .release = usb_release_interface, + .uevent = usb_if_uevent, +}; + /* * usb_set_configuration - Makes a particular device setting be current * @dev: the device whose configuration is being updated @@ -1478,8 +1553,8 @@ free_interfaces: intf->dev.parent = &dev->dev; intf->dev.driver = NULL; intf->dev.bus = &usb_bus_type; + intf->dev.type = &usb_if_device_type; intf->dev.dma_mask = dev->dev.dma_mask; - intf->dev.release = release_interface; device_initialize (&intf->dev); mark_quiesced(intf); sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d", diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f08ec85a6d64..739f520908aa 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -42,7 +42,7 @@ static void usb_autosuspend_quirk(struct usb_device *udev) { #ifdef CONFIG_USB_SUSPEND /* disable autosuspend, but allow the user to re-enable it via sysfs */ - udev->autosuspend_delay = 0; + udev->autosuspend_disabled = 1; #endif } diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 311d5df80386..e7c982377488 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> +#include <linux/string.h> #include <linux/usb.h> #include "usb.h" @@ -117,6 +118,16 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) static DEVICE_ATTR(speed, S_IRUGO, show_speed, NULL); static ssize_t +show_busnum(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev; + + udev = to_usb_device(dev); + return sprintf(buf, "%d\n", udev->bus->busnum); +} +static DEVICE_ATTR(busnum, S_IRUGO, show_busnum, NULL); + +static ssize_t show_devnum(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev; @@ -165,7 +176,7 @@ show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf) { struct usb_device *udev = to_usb_device(dev); - return sprintf(buf, "%u\n", udev->autosuspend_delay / HZ); + return sprintf(buf, "%d\n", udev->autosuspend_delay / HZ); } static ssize_t @@ -173,39 +184,115 @@ set_autosuspend(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - unsigned value, old; + int value; - if (sscanf(buf, "%u", &value) != 1 || value >= INT_MAX/HZ) + if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ || + value <= - INT_MAX/HZ) return -EINVAL; value *= HZ; - old = udev->autosuspend_delay; udev->autosuspend_delay = value; - if (value > 0 && old == 0) + if (value >= 0) usb_try_autosuspend_device(udev); - + else { + if (usb_autoresume_device(udev) == 0) + usb_autosuspend_device(udev); + } return count; } static DEVICE_ATTR(autosuspend, S_IRUGO | S_IWUSR, show_autosuspend, set_autosuspend); +static const char on_string[] = "on"; +static const char auto_string[] = "auto"; +static const char suspend_string[] = "suspend"; + +static ssize_t +show_level(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + const char *p = auto_string; + + if (udev->state == USB_STATE_SUSPENDED) { + if (udev->autoresume_disabled) + p = suspend_string; + } else { + if (udev->autosuspend_disabled) + p = on_string; + } + return sprintf(buf, "%s\n", p); +} + +static ssize_t +set_level(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + int len = count; + char *cp; + int rc = 0; + + cp = memchr(buf, '\n', count); + if (cp) + len = cp - buf; + + usb_lock_device(udev); + + /* Setting the flags without calling usb_pm_lock is a subject to + * races, but who cares... + */ + if (len == sizeof on_string - 1 && + strncmp(buf, on_string, len) == 0) { + udev->autosuspend_disabled = 1; + udev->autoresume_disabled = 0; + rc = usb_external_resume_device(udev); + + } else if (len == sizeof auto_string - 1 && + strncmp(buf, auto_string, len) == 0) { + udev->autosuspend_disabled = 0; + udev->autoresume_disabled = 0; + rc = usb_external_resume_device(udev); + + } else if (len == sizeof suspend_string - 1 && + strncmp(buf, suspend_string, len) == 0) { + udev->autosuspend_disabled = 0; + udev->autoresume_disabled = 1; + rc = usb_external_suspend_device(udev, PMSG_SUSPEND); + + } else + rc = -EINVAL; + + usb_unlock_device(udev); + return (rc < 0 ? rc : count); +} + +static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level); + static char power_group[] = "power"; static int add_power_attributes(struct device *dev) { int rc = 0; - if (is_usb_device(dev)) + if (is_usb_device(dev)) { rc = sysfs_add_file_to_group(&dev->kobj, &dev_attr_autosuspend.attr, power_group); + if (rc == 0) + rc = sysfs_add_file_to_group(&dev->kobj, + &dev_attr_level.attr, + power_group); + } return rc; } static void remove_power_attributes(struct device *dev) { sysfs_remove_file_from_group(&dev->kobj, + &dev_attr_level.attr, + power_group); + sysfs_remove_file_from_group(&dev->kobj, &dev_attr_autosuspend.attr, power_group); } @@ -270,6 +357,7 @@ static struct attribute *dev_attrs[] = { &dev_attr_bNumConfigurations.attr, &dev_attr_bMaxPacketSize0.attr, &dev_attr_speed.attr, + &dev_attr_busnum.attr, &dev_attr_devnum.attr, &dev_attr_version.attr, &dev_attr_maxchild.attr, diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 54b42ce311c1..dfd1b5c87ca3 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -49,12 +49,13 @@ const char *usbcore_name = "usbcore"; static int nousb; /* Disable USB when built into kernel image */ -struct workqueue_struct *ksuspend_usb_wq; /* For autosuspend */ +/* Workqueue for autosuspend and for remote wakeup of root hubs */ +struct workqueue_struct *ksuspend_usb_wq; #ifdef CONFIG_USB_SUSPEND static int usb_autosuspend_delay = 2; /* Default delay value, * in seconds */ -module_param_named(autosuspend, usb_autosuspend_delay, uint, 0644); +module_param_named(autosuspend, usb_autosuspend_delay, int, 0644); MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); #else @@ -196,6 +197,11 @@ static void usb_release_dev(struct device *dev) kfree(udev); } +struct device_type usb_device_type = { + .name = "usb_device", + .release = usb_release_dev, +}; + #ifdef CONFIG_PM static int ksuspend_usb_init(void) @@ -211,27 +217,6 @@ static void ksuspend_usb_cleanup(void) destroy_workqueue(ksuspend_usb_wq); } -#ifdef CONFIG_USB_SUSPEND - -/* usb_autosuspend_work - callback routine to autosuspend a USB device */ -static void usb_autosuspend_work(struct work_struct *work) -{ - struct usb_device *udev = - container_of(work, struct usb_device, autosuspend.work); - - usb_pm_lock(udev); - udev->auto_pm = 1; - usb_suspend_both(udev, PMSG_SUSPEND); - usb_pm_unlock(udev); -} - -#else - -static void usb_autosuspend_work(struct work_struct *work) -{} - -#endif /* CONFIG_USB_SUSPEND */ - #else #define ksuspend_usb_init() 0 @@ -267,13 +252,10 @@ usb_alloc_dev(struct usb_device *parent, struct usb_bus *bus, unsigned port1) device_initialize(&dev->dev); dev->dev.bus = &usb_bus_type; + dev->dev.type = &usb_device_type; dev->dev.dma_mask = bus->controller->dma_mask; - dev->dev.release = usb_release_dev; dev->state = USB_STATE_ATTACHED; - /* This magic assignment distinguishes devices from interfaces */ - dev->dev.platform_data = &usb_generic_driver; - INIT_LIST_HEAD(&dev->ep0.urb_list); dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE; dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT; @@ -902,9 +884,9 @@ static int __init usb_init(void) retval = usb_register(&usbfs_driver); if (retval) goto driver_register_failed; - retval = usbdev_init(); + retval = usb_devio_init(); if (retval) - goto usbdevice_init_failed; + goto usb_devio_init_failed; retval = usbfs_init(); if (retval) goto fs_init_failed; @@ -919,8 +901,8 @@ static int __init usb_init(void) hub_init_failed: usbfs_cleanup(); fs_init_failed: - usbdev_cleanup(); -usbdevice_init_failed: + usb_devio_cleanup(); +usb_devio_init_failed: usb_deregister(&usbfs_driver); driver_register_failed: usb_major_cleanup(); @@ -947,7 +929,7 @@ static void __exit usb_exit(void) usb_major_cleanup(); usbfs_cleanup(); usb_deregister(&usbfs_driver); - usbdev_cleanup(); + usb_devio_cleanup(); usb_hub_cleanup(); usb_host_cleanup(); bus_unregister(&usb_bus_type); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 08b5a04e3755..bf2eb0dae2ec 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -21,7 +21,6 @@ extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern void usb_kick_khubd(struct usb_device *dev); -extern void usb_resume_root_hub(struct usb_device *dev); extern int usb_match_device(struct usb_device *dev, const struct usb_device_id *id); @@ -34,10 +33,12 @@ extern void usb_host_cleanup(void); #ifdef CONFIG_PM -extern int usb_suspend_both(struct usb_device *udev, pm_message_t msg); -extern int usb_resume_both(struct usb_device *udev); +extern void usb_autosuspend_work(struct work_struct *work); extern int usb_port_suspend(struct usb_device *dev); extern int usb_port_resume(struct usb_device *dev); +extern int usb_external_suspend_device(struct usb_device *udev, + pm_message_t msg); +extern int usb_external_resume_device(struct usb_device *udev); static inline void usb_pm_lock(struct usb_device *udev) { @@ -51,11 +52,6 @@ static inline void usb_pm_unlock(struct usb_device *udev) #else -#define usb_suspend_both(udev, msg) 0 -static inline int usb_resume_both(struct usb_device *udev) -{ - return 0; -} #define usb_port_suspend(dev) 0 #define usb_port_resume(dev) 0 static inline void usb_pm_lock(struct usb_device *udev) {} @@ -82,15 +78,13 @@ static inline int usb_autoresume_device(struct usb_device *udev) extern struct workqueue_struct *ksuspend_usb_wq; extern struct bus_type usb_bus_type; +extern struct device_type usb_device_type; +extern struct device_type usb_if_device_type; extern struct usb_device_driver usb_generic_driver; -/* Here's how we tell apart devices and interfaces. Luckily there's - * no such thing as a platform USB device, so we can steal the use - * of the platform_data field. */ - static inline int is_usb_device(const struct device *dev) { - return dev->platform_data == &usb_generic_driver; + return dev->type == &usb_device_type; } /* Do the same for device drivers and interface drivers. */ @@ -126,11 +120,11 @@ extern const char *usbcore_name; extern struct mutex usbfs_mutex; extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; -extern const struct file_operations usbfs_device_file_operations; +extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern int usbdev_init(void); -extern void usbdev_cleanup(void); +extern int usb_devio_init(void); +extern void usb_devio_cleanup(void); struct dev_state { struct list_head list; /* state list */ diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 4097a86c4b5e..8065f2b53701 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -68,6 +68,27 @@ choice Many controller drivers are platform-specific; these often need board-specific hooks. +config USB_GADGET_FSL_USB2 + boolean "Freescale Highspeed USB DR Peripheral Controller" + depends on MPC834x || PPC_MPC831x + select USB_GADGET_DUALSPEED + help + Some of Freescale PowerPC processors have a High Speed + Dual-Role(DR) USB controller, which supports device mode. + + The number of programmable endpoints is different through + SOC revisions. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fsl_usb2_udc" and force + all gadget drivers to also be dynamically linked. + +config USB_FSL_USB2 + tristate + depends on USB_GADGET_FSL_USB2 + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_NET2280 boolean "NetChip 228x" depends on PCI @@ -370,6 +391,7 @@ config USB_GADGETFS config USB_FILE_STORAGE tristate "File-backed Storage Gadget" + depends on BLOCK help The File-backed Storage Gadget acts as a USB Mass Storage disk drive. As its storage repository it can use a regular diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index e71e086a1cfa..5db19396631c 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GOKU) += goku_udc.o obj-$(CONFIG_USB_OMAP) += omap_udc.o obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o obj-$(CONFIG_USB_AT91) += at91_udc.o +obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o # # USB gadget drivers diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 8f9f217e0a68..1dd8b57f4420 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -282,6 +282,9 @@ MODULE_PARM_DESC(host_addr, "Host Ethernet Address"); #define DEV_CONFIG_CDC #endif +#ifdef CONFIG_USB_GADGET_FSL_USB2 +#define DEV_CONFIG_CDC +#endif /* For CDC-incapable hardware, choose the simple cdc subset. * Anything that talks bulk (without notable bugs) can do this. @@ -1735,7 +1738,8 @@ enomem: defer_kevent (dev, WORK_RX_MEMORY); if (retval) { DEBUG (dev, "rx submit --> %d\n", retval); - dev_kfree_skb_any (skb); + if (skb) + dev_kfree_skb_any(skb); spin_lock(&dev->req_lock); list_add (&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c new file mode 100644 index 000000000000..157054ea3978 --- /dev/null +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -0,0 +1,2500 @@ +/* + * Copyright (C) 2004-2007 Freescale Semicondutor, Inc. All rights reserved. + * + * Author: Li Yang <leoli@freescale.com> + * Jiang Bo <tanya.jiang@freescale.com> + * + * Description: + * Freescale high-speed USB SOC DR module device controller driver. + * This can be found on MPC8349E/MPC8313E cpus. + * The driver is previously named as mpc_udc. Based on bare board + * code from Dave Liu and Shlomi Gridish. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#undef VERBOSE + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/proc_fs.h> +#include <linux/mm.h> +#include <linux/moduleparam.h> +#include <linux/device.h> +#include <linux/usb/ch9.h> +#include <linux/usb_gadget.h> +#include <linux/usb/otg.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/dmapool.h> + +#include <asm/byteorder.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/unaligned.h> +#include <asm/dma.h> +#include <asm/cacheflush.h> + +#include "fsl_usb2_udc.h" + +#define DRIVER_DESC "Freescale High-Speed USB SOC Device Controller driver" +#define DRIVER_AUTHOR "Li Yang/Jiang Bo" +#define DRIVER_VERSION "Apr 20, 2007" + +#define DMA_ADDR_INVALID (~(dma_addr_t)0) + +static const char driver_name[] = "fsl-usb2-udc"; +static const char driver_desc[] = DRIVER_DESC; + +volatile static struct usb_dr_device *dr_regs = NULL; +volatile static struct usb_sys_interface *usb_sys_regs = NULL; + +/* it is initialized in probe() */ +static struct fsl_udc *udc_controller = NULL; + +static const struct usb_endpoint_descriptor +fsl_ep0_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bEndpointAddress = 0, + .bmAttributes = USB_ENDPOINT_XFER_CONTROL, + .wMaxPacketSize = USB_MAX_CTRL_PAYLOAD, +}; + +static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state); +static int fsl_udc_resume(struct platform_device *pdev); +static void fsl_ep_fifo_flush(struct usb_ep *_ep); + +#ifdef CONFIG_PPC32 +#define fsl_readl(addr) in_le32(addr) +#define fsl_writel(addr, val32) out_le32(val32, addr) +#else +#define fsl_readl(addr) readl(addr) +#define fsl_writel(addr, val32) writel(addr, val32) +#endif + +/******************************************************************** + * Internal Used Function +********************************************************************/ +/*----------------------------------------------------------------- + * done() - retire a request; caller blocked irqs + * @status : request status to be set, only works when + * request is still in progress. + *--------------------------------------------------------------*/ +static void done(struct fsl_ep *ep, struct fsl_req *req, int status) +{ + struct fsl_udc *udc = NULL; + unsigned char stopped = ep->stopped; + struct ep_td_struct *curr_td, *next_td; + int j; + + udc = (struct fsl_udc *)ep->udc; + /* Removed the req from fsl_ep->queue */ + list_del_init(&req->queue); + + /* req.status should be set as -EINPROGRESS in ep_queue() */ + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + /* Free dtd for the request */ + next_td = req->head; + for (j = 0; j < req->dtd_count; j++) { + curr_td = next_td; + if (j != req->dtd_count - 1) { + next_td = curr_td->next_td_virt; + } + dma_pool_free(udc->td_pool, curr_td, curr_td->td_dma); + } + + if (req->mapped) { + dma_unmap_single(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else + dma_sync_single_for_cpu(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + + if (status && (status != -ESHUTDOWN)) + VDBG("complete %s req %p stat %d len %u/%u", + ep->ep.name, &req->req, status, + req->req.actual, req->req.length); + + ep->stopped = 1; + + spin_unlock(&ep->udc->lock); + /* complete() is from gadget layer, + * eg fsg->bulk_in_complete() */ + if (req->req.complete) + req->req.complete(&ep->ep, &req->req); + + spin_lock(&ep->udc->lock); + ep->stopped = stopped; +} + +/*----------------------------------------------------------------- + * nuke(): delete all requests related to this ep + * called with spinlock held + *--------------------------------------------------------------*/ +static void nuke(struct fsl_ep *ep, int status) +{ + ep->stopped = 1; + + /* Flush fifo */ + fsl_ep_fifo_flush(&ep->ep); + + /* Whether this eq has request linked */ + while (!list_empty(&ep->queue)) { + struct fsl_req *req = NULL; + + req = list_entry(ep->queue.next, struct fsl_req, queue); + done(ep, req, status); + } +} + +/*------------------------------------------------------------------ + Internal Hardware related function + ------------------------------------------------------------------*/ + +static int dr_controller_setup(struct fsl_udc *udc) +{ + unsigned int tmp = 0, portctrl = 0, ctrl = 0; + unsigned long timeout; +#define FSL_UDC_RESET_TIMEOUT 1000 + + /* before here, make sure dr_regs has been initialized */ + if (!udc) + return -EINVAL; + + /* Stop and reset the usb controller */ + tmp = fsl_readl(&dr_regs->usbcmd); + tmp &= ~USB_CMD_RUN_STOP; + fsl_writel(tmp, &dr_regs->usbcmd); + + tmp = fsl_readl(&dr_regs->usbcmd); + tmp |= USB_CMD_CTRL_RESET; + fsl_writel(tmp, &dr_regs->usbcmd); + + /* Wait for reset to complete */ + timeout = jiffies + FSL_UDC_RESET_TIMEOUT; + while (fsl_readl(&dr_regs->usbcmd) & USB_CMD_CTRL_RESET) { + if (time_after(jiffies, timeout)) { + ERR("udc reset timeout! \n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + /* Set the controller as device mode */ + tmp = fsl_readl(&dr_regs->usbmode); + tmp |= USB_MODE_CTRL_MODE_DEVICE; + /* Disable Setup Lockout */ + tmp |= USB_MODE_SETUP_LOCK_OFF; + fsl_writel(tmp, &dr_regs->usbmode); + + /* Clear the setup status */ + fsl_writel(0, &dr_regs->usbsts); + + tmp = udc->ep_qh_dma; + tmp &= USB_EP_LIST_ADDRESS_MASK; + fsl_writel(tmp, &dr_regs->endpointlistaddr); + + VDBG("vir[qh_base] is %p phy[qh_base] is 0x%8x reg is 0x%8x", + (int)udc->ep_qh, (int)tmp, + fsl_readl(&dr_regs->endpointlistaddr)); + + /* Config PHY interface */ + portctrl = fsl_readl(&dr_regs->portsc1); + portctrl &= ~PORTSCX_PHY_TYPE_SEL; + switch (udc->phy_mode) { + case FSL_USB2_PHY_ULPI: + portctrl |= PORTSCX_PTS_ULPI; + break; + case FSL_USB2_PHY_UTMI: + case FSL_USB2_PHY_UTMI_WIDE: + portctrl |= PORTSCX_PTS_UTMI; + break; + case FSL_USB2_PHY_SERIAL: + portctrl |= PORTSCX_PTS_FSLS; + break; + default: + return -EINVAL; + } + fsl_writel(portctrl, &dr_regs->portsc1); + + /* Config control enable i/o output, cpu endian register */ + ctrl = __raw_readl(&usb_sys_regs->control); + ctrl |= USB_CTRL_IOENB; + __raw_writel(ctrl, &usb_sys_regs->control); + +#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE) + /* Turn on cache snooping hardware, since some PowerPC platforms + * wholly rely on hardware to deal with cache coherent. */ + + /* Setup Snooping for all the 4GB space */ + tmp = SNOOP_SIZE_2GB; /* starts from 0x0, size 2G */ + __raw_writel(tmp, &usb_sys_regs->snoop1); + tmp |= 0x80000000; /* starts from 0x8000000, size 2G */ + __raw_writel(tmp, &usb_sys_regs->snoop2); +#endif + + return 0; +} + +/* Enable DR irq and set controller to run state */ +static void dr_controller_run(struct fsl_udc *udc) +{ + u32 temp; + + /* Enable DR irq reg */ + temp = USB_INTR_INT_EN | USB_INTR_ERR_INT_EN + | USB_INTR_PTC_DETECT_EN | USB_INTR_RESET_EN + | USB_INTR_DEVICE_SUSPEND | USB_INTR_SYS_ERR_EN; + + fsl_writel(temp, &dr_regs->usbintr); + + /* Clear stopped bit */ + udc->stopped = 0; + + /* Set the controller as device mode */ + temp = fsl_readl(&dr_regs->usbmode); + temp |= USB_MODE_CTRL_MODE_DEVICE; + fsl_writel(temp, &dr_regs->usbmode); + + /* Set controller to Run */ + temp = fsl_readl(&dr_regs->usbcmd); + temp |= USB_CMD_RUN_STOP; + fsl_writel(temp, &dr_regs->usbcmd); + + return; +} + +static void dr_controller_stop(struct fsl_udc *udc) +{ + unsigned int tmp; + + /* disable all INTR */ + fsl_writel(0, &dr_regs->usbintr); + + /* Set stopped bit for isr */ + udc->stopped = 1; + + /* disable IO output */ +/* usb_sys_regs->control = 0; */ + + /* set controller to Stop */ + tmp = fsl_readl(&dr_regs->usbcmd); + tmp &= ~USB_CMD_RUN_STOP; + fsl_writel(tmp, &dr_regs->usbcmd); + + return; +} + +void dr_ep_setup(unsigned char ep_num, unsigned char dir, unsigned char ep_type) +{ + unsigned int tmp_epctrl = 0; + + tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (dir) { + if (ep_num) + tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; + tmp_epctrl |= EPCTRL_TX_ENABLE; + tmp_epctrl |= ((unsigned int)(ep_type) + << EPCTRL_TX_EP_TYPE_SHIFT); + } else { + if (ep_num) + tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; + tmp_epctrl |= EPCTRL_RX_ENABLE; + tmp_epctrl |= ((unsigned int)(ep_type) + << EPCTRL_RX_EP_TYPE_SHIFT); + } + + fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); +} + +static void +dr_ep_change_stall(unsigned char ep_num, unsigned char dir, int value) +{ + u32 tmp_epctrl = 0; + + tmp_epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + + if (value) { + /* set the stall bit */ + if (dir) + tmp_epctrl |= EPCTRL_TX_EP_STALL; + else + tmp_epctrl |= EPCTRL_RX_EP_STALL; + } else { + /* clear the stall bit and reset data toggle */ + if (dir) { + tmp_epctrl &= ~EPCTRL_TX_EP_STALL; + tmp_epctrl |= EPCTRL_TX_DATA_TOGGLE_RST; + } else { + tmp_epctrl &= ~EPCTRL_RX_EP_STALL; + tmp_epctrl |= EPCTRL_RX_DATA_TOGGLE_RST; + } + } + fsl_writel(tmp_epctrl, &dr_regs->endptctrl[ep_num]); +} + +/* Get stall status of a specific ep + Return: 0: not stalled; 1:stalled */ +static int dr_ep_get_stall(unsigned char ep_num, unsigned char dir) +{ + u32 epctrl; + + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (dir) + return (epctrl & EPCTRL_TX_EP_STALL) ? 1 : 0; + else + return (epctrl & EPCTRL_RX_EP_STALL) ? 1 : 0; +} + +/******************************************************************** + Internal Structure Build up functions +********************************************************************/ + +/*------------------------------------------------------------------ +* struct_ep_qh_setup(): set the Endpoint Capabilites field of QH + * @zlt: Zero Length Termination Select (1: disable; 0: enable) + * @mult: Mult field + ------------------------------------------------------------------*/ +static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, + unsigned char dir, unsigned char ep_type, + unsigned int max_pkt_len, + unsigned int zlt, unsigned char mult) +{ + struct ep_queue_head *p_QH = &udc->ep_qh[2 * ep_num + dir]; + unsigned int tmp = 0; + + /* set the Endpoint Capabilites in QH */ + switch (ep_type) { + case USB_ENDPOINT_XFER_CONTROL: + /* Interrupt On Setup (IOS). for control ep */ + tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | EP_QUEUE_HEAD_IOS; + break; + case USB_ENDPOINT_XFER_ISOC: + tmp = (max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS) + | (mult << EP_QUEUE_HEAD_MULT_POS); + break; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + tmp = max_pkt_len << EP_QUEUE_HEAD_MAX_PKT_LEN_POS; + break; + default: + VDBG("error ep type is %d", ep_type); + return; + } + if (zlt) + tmp |= EP_QUEUE_HEAD_ZLT_SEL; + p_QH->max_pkt_length = cpu_to_le32(tmp); + + return; +} + +/* Setup qh structure and ep register for ep0. */ +static void ep0_setup(struct fsl_udc *udc) +{ + /* the intialization of an ep includes: fields in QH, Regs, + * fsl_ep struct */ + struct_ep_qh_setup(udc, 0, USB_RECV, USB_ENDPOINT_XFER_CONTROL, + USB_MAX_CTRL_PAYLOAD, 0, 0); + struct_ep_qh_setup(udc, 0, USB_SEND, USB_ENDPOINT_XFER_CONTROL, + USB_MAX_CTRL_PAYLOAD, 0, 0); + dr_ep_setup(0, USB_RECV, USB_ENDPOINT_XFER_CONTROL); + dr_ep_setup(0, USB_SEND, USB_ENDPOINT_XFER_CONTROL); + + return; + +} + +/*********************************************************************** + Endpoint Management Functions +***********************************************************************/ + +/*------------------------------------------------------------------------- + * when configurations are set, or when interface settings change + * for example the do_set_interface() in gadget layer, + * the driver will enable or disable the relevant endpoints + * ep0 doesn't use this routine. It is always enabled. +-------------------------------------------------------------------------*/ +static int fsl_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fsl_udc *udc = NULL; + struct fsl_ep *ep = NULL; + unsigned short max = 0; + unsigned char mult = 0, zlt; + int retval = -EINVAL; + unsigned long flags = 0; + + ep = container_of(_ep, struct fsl_ep, ep); + + /* catch various bogus parameters */ + if (!_ep || !desc || ep->desc + || (desc->bDescriptorType != USB_DT_ENDPOINT)) + return -EINVAL; + + udc = ep->udc; + + if (!udc->driver || (udc->gadget.speed == USB_SPEED_UNKNOWN)) + return -ESHUTDOWN; + + max = le16_to_cpu(desc->wMaxPacketSize); + + /* Disable automatic zlp generation. Driver is reponsible to indicate + * explicitly through req->req.zero. This is needed to enable multi-td + * request. */ + zlt = 1; + + /* Assume the max packet size from gadget is always correct */ + switch (desc->bmAttributes & 0x03) { + case USB_ENDPOINT_XFER_CONTROL: + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + /* mult = 0. Execute N Transactions as demonstrated by + * the USB variable length packet protocol where N is + * computed using the Maximum Packet Length (dQH) and + * the Total Bytes field (dTD) */ + mult = 0; + break; + case USB_ENDPOINT_XFER_ISOC: + /* Calculate transactions needed for high bandwidth iso */ + mult = (unsigned char)(1 + ((max >> 11) & 0x03)); + max = max & 0x8ff; /* bit 0~10 */ + /* 3 transactions at most */ + if (mult > 3) + goto en_done; + break; + default: + goto en_done; + } + + spin_lock_irqsave(&udc->lock, flags); + ep->ep.maxpacket = max; + ep->desc = desc; + ep->stopped = 0; + + /* Controller related setup */ + /* Init EPx Queue Head (Ep Capabilites field in QH + * according to max, zlt, mult) */ + struct_ep_qh_setup(udc, (unsigned char) ep_index(ep), + (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) + ? USB_SEND : USB_RECV), + (unsigned char) (desc->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK), + max, zlt, mult); + + /* Init endpoint ctrl register */ + dr_ep_setup((unsigned char) ep_index(ep), + (unsigned char) ((desc->bEndpointAddress & USB_DIR_IN) + ? USB_SEND : USB_RECV), + (unsigned char) (desc->bmAttributes + & USB_ENDPOINT_XFERTYPE_MASK)); + + spin_unlock_irqrestore(&udc->lock, flags); + retval = 0; + + VDBG("enabled %s (ep%d%s) maxpacket %d",ep->ep.name, + ep->desc->bEndpointAddress & 0x0f, + (desc->bEndpointAddress & USB_DIR_IN) + ? "in" : "out", max); +en_done: + return retval; +} + +/*--------------------------------------------------------------------- + * @ep : the ep being unconfigured. May not be ep0 + * Any pending and uncomplete req will complete with status (-ESHUTDOWN) +*---------------------------------------------------------------------*/ +static int fsl_ep_disable(struct usb_ep *_ep) +{ + struct fsl_udc *udc = NULL; + struct fsl_ep *ep = NULL; + unsigned long flags = 0; + u32 epctrl; + int ep_num; + + ep = container_of(_ep, struct fsl_ep, ep); + if (!_ep || !ep->desc) { + VDBG("%s not enabled", _ep ? ep->ep.name : NULL); + return -EINVAL; + } + + /* disable ep on controller */ + ep_num = ep_index(ep); + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) + epctrl &= ~EPCTRL_TX_ENABLE; + else + epctrl &= ~EPCTRL_RX_ENABLE; + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + + udc = (struct fsl_udc *)ep->udc; + spin_lock_irqsave(&udc->lock, flags); + + /* nuke all pending requests (does flush) */ + nuke(ep, -ESHUTDOWN); + + ep->desc = 0; + ep->stopped = 1; + spin_unlock_irqrestore(&udc->lock, flags); + + VDBG("disabled %s OK", _ep->name); + return 0; +} + +/*--------------------------------------------------------------------- + * allocate a request object used by this endpoint + * the main operation is to insert the req->queue to the eq->queue + * Returns the request, or null if one could not be allocated +*---------------------------------------------------------------------*/ +static struct usb_request * +fsl_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) +{ + struct fsl_req *req = NULL; + + req = kzalloc(sizeof *req, gfp_flags); + if (!req) + return NULL; + + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fsl_req *req = NULL; + + req = container_of(_req, struct fsl_req, req); + + if (_req) + kfree(req); +} + +/*------------------------------------------------------------------ + * Allocate an I/O buffer +*---------------------------------------------------------------------*/ +static void *fsl_alloc_buffer(struct usb_ep *_ep, unsigned bytes, + dma_addr_t *dma, gfp_t gfp_flags) +{ + struct fsl_ep *ep; + + if (!_ep) + return NULL; + + ep = container_of(_ep, struct fsl_ep, ep); + + return dma_alloc_coherent(ep->udc->gadget.dev.parent, + bytes, dma, gfp_flags); +} + +/*------------------------------------------------------------------ + * frees an i/o buffer +*---------------------------------------------------------------------*/ +static void fsl_free_buffer(struct usb_ep *_ep, void *buf, + dma_addr_t dma, unsigned bytes) +{ + struct fsl_ep *ep; + + if (!_ep) + return NULL; + + ep = container_of(_ep, struct fsl_ep, ep); + + dma_free_coherent(ep->udc->gadget.dev.parent, bytes, buf, dma); +} + +/*-------------------------------------------------------------------------*/ +static int fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req) +{ + int i = ep_index(ep) * 2 + ep_is_in(ep); + u32 temp, bitmask, tmp_stat; + struct ep_queue_head *dQH = &ep->udc->ep_qh[i]; + + /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr); + VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */ + + bitmask = ep_is_in(ep) + ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))); + + /* check if the pipe is empty */ + if (!(list_empty(&ep->queue))) { + /* Add td to the end */ + struct fsl_req *lastreq; + lastreq = list_entry(ep->queue.prev, struct fsl_req, queue); + lastreq->tail->next_td_ptr = + cpu_to_le32(req->head->td_dma & DTD_ADDR_MASK); + /* Read prime bit, if 1 goto done */ + if (fsl_readl(&dr_regs->endpointprime) & bitmask) + goto out; + + do { + /* Set ATDTW bit in USBCMD */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp | USB_CMD_ATDTW, &dr_regs->usbcmd); + + /* Read correct status bit */ + tmp_stat = fsl_readl(&dr_regs->endptstatus) & bitmask; + + } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_ATDTW)); + + /* Write ATDTW bit to 0 */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd); + + if (tmp_stat) + goto out; + } + + /* Write dQH next pointer and terminate bit to 0 */ + temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK; + dQH->next_dtd_ptr = cpu_to_le32(temp); + + /* Clear active and halt bit */ + temp = cpu_to_le32(~(EP_QUEUE_HEAD_STATUS_ACTIVE + | EP_QUEUE_HEAD_STATUS_HALT)); + dQH->size_ioc_int_sts &= temp; + + /* Prime endpoint by writing 1 to ENDPTPRIME */ + temp = ep_is_in(ep) + ? (1 << (ep_index(ep) + 16)) + : (1 << (ep_index(ep))); + fsl_writel(temp, &dr_regs->endpointprime); +out: + return 0; +} + +/* Fill in the dTD structure + * @req: request that the transfer belongs to + * @length: return actually data length of the dTD + * @dma: return dma address of the dTD + * @is_last: return flag if it is the last dTD of the request + * return: pointer to the built dTD */ +static struct ep_td_struct *fsl_build_dtd(struct fsl_req *req, unsigned *length, + dma_addr_t *dma, int *is_last) +{ + u32 swap_temp; + struct ep_td_struct *dtd; + + /* how big will this transfer be? */ + *length = min(req->req.length - req->req.actual, + (unsigned)EP_MAX_LENGTH_TRANSFER); + + dtd = dma_pool_alloc(udc_controller->td_pool, GFP_KERNEL, dma); + if (dtd == NULL) + return dtd; + + dtd->td_dma = *dma; + /* Clear reserved field */ + swap_temp = cpu_to_le32(dtd->size_ioc_sts); + swap_temp &= ~DTD_RESERVED_FIELDS; + dtd->size_ioc_sts = cpu_to_le32(swap_temp); + + /* Init all of buffer page pointers */ + swap_temp = (u32) (req->req.dma + req->req.actual); + dtd->buff_ptr0 = cpu_to_le32(swap_temp); + dtd->buff_ptr1 = cpu_to_le32(swap_temp + 0x1000); + dtd->buff_ptr2 = cpu_to_le32(swap_temp + 0x2000); + dtd->buff_ptr3 = cpu_to_le32(swap_temp + 0x3000); + dtd->buff_ptr4 = cpu_to_le32(swap_temp + 0x4000); + + req->req.actual += *length; + + /* zlp is needed if req->req.zero is set */ + if (req->req.zero) { + if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0) + *is_last = 1; + else + *is_last = 0; + } else if (req->req.length == req->req.actual) + *is_last = 1; + else + *is_last = 0; + + if ((*is_last) == 0) + VDBG("multi-dtd request!\n"); + /* Fill in the transfer size; set active bit */ + swap_temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE); + + /* Enable interrupt for the last dtd of a request */ + if (*is_last && !req->req.no_interrupt) + swap_temp |= DTD_IOC; + + dtd->size_ioc_sts = cpu_to_le32(swap_temp); + + mb(); + + VDBG("length = %d address= 0x%x", *length, (int)*dma); + + return dtd; +} + +/* Generate dtd chain for a request */ +static int fsl_req_to_dtd(struct fsl_req *req) +{ + unsigned count; + int is_last; + int is_first =1; + struct ep_td_struct *last_dtd = NULL, *dtd; + dma_addr_t dma; + + do { + dtd = fsl_build_dtd(req, &count, &dma, &is_last); + if (dtd == NULL) + return -ENOMEM; + + if (is_first) { + is_first = 0; + req->head = dtd; + } else { + last_dtd->next_td_ptr = cpu_to_le32(dma); + last_dtd->next_td_virt = dtd; + } + last_dtd = dtd; + + req->dtd_count++; + } while (!is_last); + + dtd->next_td_ptr = cpu_to_le32(DTD_NEXT_TERMINATE); + + req->tail = dtd; + + return 0; +} + +/* queues (submits) an I/O request to an endpoint */ +static int +fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) +{ + struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); + struct fsl_req *req = container_of(_req, struct fsl_req, req); + struct fsl_udc *udc; + unsigned long flags; + int is_iso = 0; + + /* catch various bogus parameters */ + if (!_req || !req->req.complete || !req->req.buf + || !list_empty(&req->queue)) { + VDBG("%s, bad params\n", __FUNCTION__); + return -EINVAL; + } + if (!_ep || (!ep->desc && ep_index(ep))) { + VDBG("%s, bad ep\n", __FUNCTION__); + return -EINVAL; + } + if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + if (req->req.length > ep->ep.maxpacket) + return -EMSGSIZE; + is_iso = 1; + } + + udc = ep->udc; + if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + req->ep = ep; + + /* map virtual address to hardware */ + if (req->req.dma == DMA_ADDR_INVALID) { + req->req.dma = dma_map_single(ep->udc->gadget.dev.parent, + req->req.buf, + req->req.length, ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device(ep->udc->gadget.dev.parent, + req->req.dma, req->req.length, + ep_is_in(ep) + ? DMA_TO_DEVICE + : DMA_FROM_DEVICE); + req->mapped = 0; + } + + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->dtd_count = 0; + + spin_lock_irqsave(&udc->lock, flags); + + /* build dtds and push them to device queue */ + if (!fsl_req_to_dtd(req)) { + fsl_queue_td(ep, req); + } else { + spin_unlock_irqrestore(&udc->lock, flags); + return -ENOMEM; + } + + /* Update ep0 state */ + if ((ep_index(ep) == 0)) + udc->ep0_state = DATA_STATE_XMIT; + + /* irq handler advances the queue */ + if (req != NULL) + list_add_tail(&req->queue, &ep->queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +/* dequeues (cancels, unlinks) an I/O request from an endpoint */ +static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); + struct fsl_req *req; + unsigned long flags; + int ep_num, stopped, ret = 0; + u32 epctrl; + + if (!_ep || !_req) + return -EINVAL; + + spin_lock_irqsave(&ep->udc->lock, flags); + stopped = ep->stopped; + + /* Stop the ep before we deal with the queue */ + ep->stopped = 1; + ep_num = ep_index(ep); + epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) + epctrl &= ~EPCTRL_TX_ENABLE; + else + epctrl &= ~EPCTRL_RX_ENABLE; + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) { + if (&req->req == _req) + break; + } + if (&req->req != _req) { + ret = -EINVAL; + goto out; + } + + /* The request is in progress, or completed but not dequeued */ + if (ep->queue.next == &req->queue) { + _req->status = -ECONNRESET; + fsl_ep_fifo_flush(_ep); /* flush current transfer */ + + /* The request isn't the last request in this ep queue */ + if (req->queue.next != &ep->queue) { + struct ep_queue_head *qh; + struct fsl_req *next_req; + + qh = ep->qh; + next_req = list_entry(req->queue.next, struct fsl_req, + queue); + + /* Point the QH to the first TD of next request */ + fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr); + } + + /* The request hasn't been processed, patch up the TD chain */ + } else { + struct fsl_req *prev_req; + + prev_req = list_entry(req->queue.prev, struct fsl_req, queue); + fsl_writel(fsl_readl(&req->tail->next_td_ptr), + &prev_req->tail->next_td_ptr); + + } + + done(ep, req, -ECONNRESET); + + /* Enable EP */ +out: epctrl = fsl_readl(&dr_regs->endptctrl[ep_num]); + if (ep_is_in(ep)) + epctrl |= EPCTRL_TX_ENABLE; + else + epctrl |= EPCTRL_RX_ENABLE; + fsl_writel(epctrl, &dr_regs->endptctrl[ep_num]); + ep->stopped = stopped; + + spin_unlock_irqrestore(&ep->udc->lock, flags); + return ret; +} + +/*-------------------------------------------------------------------------*/ + +/*----------------------------------------------------------------- + * modify the endpoint halt feature + * @ep: the non-isochronous endpoint being stalled + * @value: 1--set halt 0--clear halt + * Returns zero, or a negative error code. +*----------------------------------------------------------------*/ +static int fsl_ep_set_halt(struct usb_ep *_ep, int value) +{ + struct fsl_ep *ep = NULL; + unsigned long flags = 0; + int status = -EOPNOTSUPP; /* operation not supported */ + unsigned char ep_dir = 0, ep_num = 0; + struct fsl_udc *udc = NULL; + + ep = container_of(_ep, struct fsl_ep, ep); + udc = ep->udc; + if (!_ep || !ep->desc) { + status = -EINVAL; + goto out; + } + + if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + status = -EOPNOTSUPP; + goto out; + } + + /* Attempt to halt IN ep will fail if any transfer requests + * are still queue */ + if (value && ep_is_in(ep) && !list_empty(&ep->queue)) { + status = -EAGAIN; + goto out; + } + + status = 0; + ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; + ep_num = (unsigned char)(ep_index(ep)); + spin_lock_irqsave(&ep->udc->lock, flags); + dr_ep_change_stall(ep_num, ep_dir, value); + spin_unlock_irqrestore(&ep->udc->lock, flags); + + if (ep_index(ep) == 0) { + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; + } +out: + VDBG(" %s %s halt stat %d", ep->ep.name, + value ? "set" : "clear", status); + + return status; +} + +static void fsl_ep_fifo_flush(struct usb_ep *_ep) +{ + struct fsl_ep *ep; + int ep_num, ep_dir; + u32 bits; + unsigned long timeout; +#define FSL_UDC_FLUSH_TIMEOUT 1000 + + if (!_ep) { + return; + } else { + ep = container_of(_ep, struct fsl_ep, ep); + if (!ep->desc) + return; + } + ep_num = ep_index(ep); + ep_dir = ep_is_in(ep) ? USB_SEND : USB_RECV; + + if (ep_num == 0) + bits = (1 << 16) | 1; + else if (ep_dir == USB_SEND) + bits = 1 << (16 + ep_num); + else + bits = 1 << ep_num; + + timeout = jiffies + FSL_UDC_FLUSH_TIMEOUT; + do { + fsl_writel(bits, &dr_regs->endptflush); + + /* Wait until flush complete */ + while (fsl_readl(&dr_regs->endptflush)) { + if (time_after(jiffies, timeout)) { + ERR("ep flush timeout\n"); + return; + } + cpu_relax(); + } + /* See if we need to flush again */ + } while (fsl_readl(&dr_regs->endptstatus) & bits); +} + +static struct usb_ep_ops fsl_ep_ops = { + .enable = fsl_ep_enable, + .disable = fsl_ep_disable, + + .alloc_request = fsl_alloc_request, + .free_request = fsl_free_request, + + .alloc_buffer = fsl_alloc_buffer, + .free_buffer = fsl_free_buffer, + + .queue = fsl_ep_queue, + .dequeue = fsl_ep_dequeue, + + .set_halt = fsl_ep_set_halt, + .fifo_flush = fsl_ep_fifo_flush, /* flush fifo */ +}; + +/*------------------------------------------------------------------------- + Gadget Driver Layer Operations +-------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------- + * Get the current frame number (from DR frame_index Reg ) + *----------------------------------------------------------------------*/ +static int fsl_get_frame(struct usb_gadget *gadget) +{ + return (int)(fsl_readl(&dr_regs->frindex) & USB_FRINDEX_MASKS); +} + +/*----------------------------------------------------------------------- + * Tries to wake up the host connected to this gadget + -----------------------------------------------------------------------*/ +static int fsl_wakeup(struct usb_gadget *gadget) +{ + struct fsl_udc *udc = container_of(gadget, struct fsl_udc, gadget); + u32 portsc; + + /* Remote wakeup feature not enabled by host */ + if (!udc->remote_wakeup) + return -ENOTSUPP; + + portsc = fsl_readl(&dr_regs->portsc1); + /* not suspended? */ + if (!(portsc & PORTSCX_PORT_SUSPEND)) + return 0; + /* trigger force resume */ + portsc |= PORTSCX_PORT_FORCE_RESUME; + fsl_writel(portsc, &dr_regs->portsc1); + return 0; +} + +static int can_pullup(struct fsl_udc *udc) +{ + return udc->driver && udc->softconnect && udc->vbus_active; +} + +/* Notify controller that VBUS is powered, Called by whatever + detects VBUS sessions */ +static int fsl_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct fsl_udc *udc; + unsigned long flags; + + udc = container_of(gadget, struct fsl_udc, gadget); + spin_lock_irqsave(&udc->lock, flags); + VDBG("VBUS %s\n", is_active ? "on" : "off"); + udc->vbus_active = (is_active != 0); + if (can_pullup(udc)) + fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + else + fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; +} + +/* constrain controller's VBUS power usage + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ +#ifdef CONFIG_USB_OTG + struct fsl_udc *udc; + + udc = container_of(gadget, struct fsl_udc, gadget); + + if (udc->transceiver) + return otg_set_power(udc->transceiver, mA); +#endif + return -ENOTSUPP; +} + +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnet + */ +static int fsl_pullup(struct usb_gadget *gadget, int is_on) +{ + struct fsl_udc *udc; + + udc = container_of(gadget, struct fsl_udc, gadget); + udc->softconnect = (is_on != 0); + if (can_pullup(udc)) + fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + else + fsl_writel((fsl_readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP), + &dr_regs->usbcmd); + + return 0; +} + +/* defined in usb_gadget.h */ +static struct usb_gadget_ops fsl_gadget_ops = { + .get_frame = fsl_get_frame, + .wakeup = fsl_wakeup, +/* .set_selfpowered = fsl_set_selfpowered, */ /* Always selfpowered */ + .vbus_session = fsl_vbus_session, + .vbus_draw = fsl_vbus_draw, + .pullup = fsl_pullup, +}; + +/* Set protocol stall on ep0, protocol stall will automatically be cleared + on new transaction */ +static void ep0stall(struct fsl_udc *udc) +{ + u32 tmp; + + /* must set tx and rx to stall at the same time */ + tmp = fsl_readl(&dr_regs->endptctrl[0]); + tmp |= EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL; + fsl_writel(tmp, &dr_regs->endptctrl[0]); + udc->ep0_state = WAIT_FOR_SETUP; + udc->ep0_dir = 0; +} + +/* Prime a status phase for ep0 */ +static int ep0_prime_status(struct fsl_udc *udc, int direction) +{ + struct fsl_req *req = udc->status_req; + struct fsl_ep *ep; + int status = 0; + + if (direction == EP_DIR_IN) + udc->ep0_dir = USB_DIR_IN; + else + udc->ep0_dir = USB_DIR_OUT; + + ep = &udc->eps[0]; + udc->ep0_state = WAIT_FOR_OUT_STATUS; + + req->ep = ep; + req->req.length = 0; + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->req.complete = NULL; + req->dtd_count = 0; + + if (fsl_req_to_dtd(req) == 0) + status = fsl_queue_td(ep, req); + else + return -ENOMEM; + + if (status) + ERR("Can't queue ep0 status request \n"); + list_add_tail(&req->queue, &ep->queue); + + return status; +} + +static inline int udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe) +{ + struct fsl_ep *ep = get_ep_by_pipe(udc, pipe); + + if (!ep->name) + return 0; + + nuke(ep, -ESHUTDOWN); + + return 0; +} + +/* + * ch9 Set address + */ +static void ch9setaddress(struct fsl_udc *udc, u16 value, u16 index, u16 length) +{ + /* Save the new address to device struct */ + udc->device_address = (u8) value; + /* Update usb state */ + udc->usb_state = USB_STATE_ADDRESS; + /* Status phase */ + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); +} + +/* + * ch9 Get status + */ +static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value, + u16 index, u16 length) +{ + u16 tmp = 0; /* Status, cpu endian */ + + struct fsl_req *req; + struct fsl_ep *ep; + int status = 0; + + ep = &udc->eps[0]; + + if ((request_type & USB_RECIP_MASK) == USB_RECIP_DEVICE) { + /* Get device status */ + tmp = 1 << USB_DEVICE_SELF_POWERED; + tmp |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { + /* Get interface status */ + /* We don't have interface information in udc driver */ + tmp = 0; + } else if ((request_type & USB_RECIP_MASK) == USB_RECIP_ENDPOINT) { + /* Get endpoint status */ + struct fsl_ep *target_ep; + + target_ep = get_ep_by_pipe(udc, get_pipe_by_windex(index)); + + /* stall if endpoint doesn't exist */ + if (!target_ep->desc) + goto stall; + tmp = dr_ep_get_stall(ep_index(target_ep), ep_is_in(target_ep)) + << USB_ENDPOINT_HALT; + } + + udc->ep0_dir = USB_DIR_IN; + /* Borrow the per device status_req */ + req = udc->status_req; + /* Fill in the reqest structure */ + *((u16 *) req->req.buf) = cpu_to_le16(tmp); + req->ep = ep; + req->req.length = 2; + req->req.status = -EINPROGRESS; + req->req.actual = 0; + req->req.complete = NULL; + req->dtd_count = 0; + + /* prime the data phase */ + if ((fsl_req_to_dtd(req) == 0)) + status = fsl_queue_td(ep, req); + else /* no mem */ + goto stall; + + if (status) { + ERR("Can't respond to getstatus request \n"); + goto stall; + } + list_add_tail(&req->queue, &ep->queue); + udc->ep0_state = DATA_STATE_XMIT; + return; +stall: + ep0stall(udc); +} + +static void setup_received_irq(struct fsl_udc *udc, + struct usb_ctrlrequest *setup) +{ + u16 wValue = le16_to_cpu(setup->wValue); + u16 wIndex = le16_to_cpu(setup->wIndex); + u16 wLength = le16_to_cpu(setup->wLength); + + udc_reset_ep_queue(udc, 0); + + switch (setup->bRequest) { + /* Request that need Data+Status phase from udc */ + case USB_REQ_GET_STATUS: + if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_STANDARD)) + != (USB_DIR_IN | USB_TYPE_STANDARD)) + break; + ch9getstatus(udc, setup->bRequestType, wValue, wIndex, wLength); + break; + + /* Requests that need Status phase from udc */ + case USB_REQ_SET_ADDRESS: + if (setup->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD + | USB_RECIP_DEVICE)) + break; + ch9setaddress(udc, wValue, wIndex, wLength); + break; + + /* Handled by udc, no data, status by udc */ + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + { /* status transaction */ + int rc = -EOPNOTSUPP; + + if ((setup->bRequestType & USB_RECIP_MASK) + == USB_RECIP_ENDPOINT) { + int pipe = get_pipe_by_windex(wIndex); + struct fsl_ep *ep; + + if (wValue != 0 || wLength != 0 || pipe > udc->max_ep) + break; + ep = get_ep_by_pipe(udc, pipe); + + spin_unlock(&udc->lock); + rc = fsl_ep_set_halt(&ep->ep, + (setup->bRequest == USB_REQ_SET_FEATURE) + ? 1 : 0); + spin_lock(&udc->lock); + + } else if ((setup->bRequestType & USB_RECIP_MASK) + == USB_RECIP_DEVICE) { + /* Note: The driver has not include OTG support yet. + * This will be set when OTG support is added */ + if (!udc->gadget.is_otg) + break; + else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) + udc->gadget.b_hnp_enable = 1; + else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) + udc->gadget.a_hnp_support = 1; + else if (setup->bRequest == + USB_DEVICE_A_ALT_HNP_SUPPORT) + udc->gadget.a_alt_hnp_support = 1; + rc = 0; + } + if (rc == 0) { + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); + } + break; + } + /* Requests handled by gadget */ + default: + if (wLength) { + /* Data phase from gadget, status phase from udc */ + udc->ep0_dir = (setup->bRequestType & USB_DIR_IN) + ? USB_DIR_IN : USB_DIR_OUT; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = (setup->bRequestType & USB_DIR_IN) + ? DATA_STATE_XMIT : DATA_STATE_RECV; + + } else { + /* No data phase, IN status from gadget */ + udc->ep0_dir = USB_DIR_IN; + spin_unlock(&udc->lock); + if (udc->driver->setup(&udc->gadget, + &udc->local_setup_buff) < 0) + ep0stall(udc); + spin_lock(&udc->lock); + udc->ep0_state = WAIT_FOR_OUT_STATUS; + } + break; + } +} + +/* Process request for Data or Status phase of ep0 + * prime status phase if needed */ +static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0, + struct fsl_req *req) +{ + if (udc->usb_state == USB_STATE_ADDRESS) { + /* Set the new address */ + u32 new_address = (u32) udc->device_address; + fsl_writel(new_address << USB_DEVICE_ADDRESS_BIT_POS, + &dr_regs->deviceaddr); + } + + done(ep0, req, 0); + + switch (udc->ep0_state) { + case DATA_STATE_XMIT: + /* receive status phase */ + if (ep0_prime_status(udc, EP_DIR_OUT)) + ep0stall(udc); + break; + case DATA_STATE_RECV: + /* send status phase */ + if (ep0_prime_status(udc, EP_DIR_IN)) + ep0stall(udc); + break; + case WAIT_FOR_OUT_STATUS: + udc->ep0_state = WAIT_FOR_SETUP; + break; + case WAIT_FOR_SETUP: + ERR("Unexpect ep0 packets \n"); + break; + default: + ep0stall(udc); + break; + } +} + +/* Tripwire mechanism to ensure a setup packet payload is extracted without + * being corrupted by another incoming setup packet */ +static void tripwire_handler(struct fsl_udc *udc, u8 ep_num, u8 *buffer_ptr) +{ + u32 temp; + struct ep_queue_head *qh; + + qh = &udc->ep_qh[ep_num * 2 + EP_DIR_OUT]; + + /* Clear bit in ENDPTSETUPSTAT */ + temp = fsl_readl(&dr_regs->endptsetupstat); + fsl_writel(temp | (1 << ep_num), &dr_regs->endptsetupstat); + + /* while a hazard exists when setup package arrives */ + do { + /* Set Setup Tripwire */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp | USB_CMD_SUTW, &dr_regs->usbcmd); + + /* Copy the setup packet to local buffer */ + memcpy(buffer_ptr, (u8 *) qh->setup_buffer, 8); + } while (!(fsl_readl(&dr_regs->usbcmd) & USB_CMD_SUTW)); + + /* Clear Setup Tripwire */ + temp = fsl_readl(&dr_regs->usbcmd); + fsl_writel(temp & ~USB_CMD_SUTW, &dr_regs->usbcmd); +} + +/* process-ep_req(): free the completed Tds for this req */ +static int process_ep_req(struct fsl_udc *udc, int pipe, + struct fsl_req *curr_req) +{ + struct ep_td_struct *curr_td; + int td_complete, actual, remaining_length, j, tmp; + int status = 0; + int errors = 0; + struct ep_queue_head *curr_qh = &udc->ep_qh[pipe]; + int direction = pipe % 2; + + curr_td = curr_req->head; + td_complete = 0; + actual = curr_req->req.length; + + for (j = 0; j < curr_req->dtd_count; j++) { + remaining_length = (le32_to_cpu(curr_td->size_ioc_sts) + & DTD_PACKET_SIZE) + >> DTD_LENGTH_BIT_POS; + actual -= remaining_length; + + if ((errors = le32_to_cpu(curr_td->size_ioc_sts) & + DTD_ERROR_MASK)) { + if (errors & DTD_STATUS_HALTED) { + ERR("dTD error %08x QH=%d\n", errors, pipe); + /* Clear the errors and Halt condition */ + tmp = le32_to_cpu(curr_qh->size_ioc_int_sts); + tmp &= ~errors; + curr_qh->size_ioc_int_sts = cpu_to_le32(tmp); + status = -EPIPE; + /* FIXME: continue with next queued TD? */ + + break; + } + if (errors & DTD_STATUS_DATA_BUFF_ERR) { + VDBG("Transfer overflow"); + status = -EPROTO; + break; + } else if (errors & DTD_STATUS_TRANSACTION_ERR) { + VDBG("ISO error"); + status = -EILSEQ; + break; + } else + ERR("Unknown error has occured (0x%x)!\r\n", + errors); + + } else if (le32_to_cpu(curr_td->size_ioc_sts) + & DTD_STATUS_ACTIVE) { + VDBG("Request not complete"); + status = REQ_UNCOMPLETE; + return status; + } else if (remaining_length) { + if (direction) { + VDBG("Transmit dTD remaining length not zero"); + status = -EPROTO; + break; + } else { + td_complete++; + break; + } + } else { + td_complete++; + VDBG("dTD transmitted successful "); + } + + if (j != curr_req->dtd_count - 1) + curr_td = (struct ep_td_struct *)curr_td->next_td_virt; + } + + if (status) + return status; + + curr_req->req.actual = actual; + + return 0; +} + +/* Process a DTD completion interrupt */ +static void dtd_complete_irq(struct fsl_udc *udc) +{ + u32 bit_pos; + int i, ep_num, direction, bit_mask, status; + struct fsl_ep *curr_ep; + struct fsl_req *curr_req, *temp_req; + + /* Clear the bits in the register */ + bit_pos = fsl_readl(&dr_regs->endptcomplete); + fsl_writel(bit_pos, &dr_regs->endptcomplete); + + if (!bit_pos) + return; + + for (i = 0; i < udc->max_ep * 2; i++) { + ep_num = i >> 1; + direction = i % 2; + + bit_mask = 1 << (ep_num + 16 * direction); + + if (!(bit_pos & bit_mask)) + continue; + + curr_ep = get_ep_by_pipe(udc, i); + + /* If the ep is configured */ + if (curr_ep->name == NULL) { + WARN("Invalid EP?"); + continue; + } + + /* process the req queue until an uncomplete request */ + list_for_each_entry_safe(curr_req, temp_req, &curr_ep->queue, + queue) { + status = process_ep_req(udc, i, curr_req); + + VDBG("status of process_ep_req= %d, ep = %d", + status, ep_num); + if (status == REQ_UNCOMPLETE) + break; + /* write back status to req */ + curr_req->req.status = status; + + if (ep_num == 0) { + ep0_req_complete(udc, curr_ep, curr_req); + break; + } else + done(curr_ep, curr_req, status); + } + } +} + +/* Process a port change interrupt */ +static void port_change_irq(struct fsl_udc *udc) +{ + u32 speed; + + if (udc->bus_reset) + udc->bus_reset = 0; + + /* Bus resetting is finished */ + if (!(fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET)) { + /* Get the speed */ + speed = (fsl_readl(&dr_regs->portsc1) + & PORTSCX_PORT_SPEED_MASK); + switch (speed) { + case PORTSCX_PORT_SPEED_HIGH: + udc->gadget.speed = USB_SPEED_HIGH; + break; + case PORTSCX_PORT_SPEED_FULL: + udc->gadget.speed = USB_SPEED_FULL; + break; + case PORTSCX_PORT_SPEED_LOW: + udc->gadget.speed = USB_SPEED_LOW; + break; + default: + udc->gadget.speed = USB_SPEED_UNKNOWN; + break; + } + } + + /* Update USB state */ + if (!udc->resume_state) + udc->usb_state = USB_STATE_DEFAULT; +} + +/* Process suspend interrupt */ +static void suspend_irq(struct fsl_udc *udc) +{ + udc->resume_state = udc->usb_state; + udc->usb_state = USB_STATE_SUSPENDED; + + /* report suspend to the driver, serial.c does not support this */ + if (udc->driver->suspend) + udc->driver->suspend(&udc->gadget); +} + +static void bus_resume(struct fsl_udc *udc) +{ + udc->usb_state = udc->resume_state; + udc->resume_state = 0; + + /* report resume to the driver, serial.c does not support this */ + if (udc->driver->resume) + udc->driver->resume(&udc->gadget); +} + +/* Clear up all ep queues */ +static int reset_queues(struct fsl_udc *udc) +{ + u8 pipe; + + for (pipe = 0; pipe < udc->max_pipes; pipe++) + udc_reset_ep_queue(udc, pipe); + + /* report disconnect; the driver is already quiesced */ + udc->driver->disconnect(&udc->gadget); + + return 0; +} + +/* Process reset interrupt */ +static void reset_irq(struct fsl_udc *udc) +{ + u32 temp; + unsigned long timeout; + + /* Clear the device address */ + temp = fsl_readl(&dr_regs->deviceaddr); + fsl_writel(temp & ~USB_DEVICE_ADDRESS_MASK, &dr_regs->deviceaddr); + + udc->device_address = 0; + + /* Clear usb state */ + udc->resume_state = 0; + udc->ep0_dir = 0; + udc->ep0_state = WAIT_FOR_SETUP; + udc->remote_wakeup = 0; /* default to 0 on reset */ + udc->gadget.b_hnp_enable = 0; + udc->gadget.a_hnp_support = 0; + udc->gadget.a_alt_hnp_support = 0; + + /* Clear all the setup token semaphores */ + temp = fsl_readl(&dr_regs->endptsetupstat); + fsl_writel(temp, &dr_regs->endptsetupstat); + + /* Clear all the endpoint complete status bits */ + temp = fsl_readl(&dr_regs->endptcomplete); + fsl_writel(temp, &dr_regs->endptcomplete); + + timeout = jiffies + 100; + while (fsl_readl(&dr_regs->endpointprime)) { + /* Wait until all endptprime bits cleared */ + if (time_after(jiffies, timeout)) { + ERR("Timeout for reset\n"); + break; + } + cpu_relax(); + } + + /* Write 1s to the flush register */ + fsl_writel(0xffffffff, &dr_regs->endptflush); + + if (fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_RESET) { + VDBG("Bus reset"); + /* Bus is reseting */ + udc->bus_reset = 1; + /* Reset all the queues, include XD, dTD, EP queue + * head and TR Queue */ + reset_queues(udc); + udc->usb_state = USB_STATE_DEFAULT; + } else { + VDBG("Controller reset"); + /* initialize usb hw reg except for regs for EP, not + * touch usbintr reg */ + dr_controller_setup(udc); + + /* Reset all internal used Queues */ + reset_queues(udc); + + ep0_setup(udc); + + /* Enable DR IRQ reg, Set Run bit, change udc state */ + dr_controller_run(udc); + udc->usb_state = USB_STATE_ATTACHED; + } +} + +/* + * USB device controller interrupt handler + */ +static irqreturn_t fsl_udc_irq(int irq, void *_udc) +{ + struct fsl_udc *udc = _udc; + u32 irq_src; + irqreturn_t status = IRQ_NONE; + unsigned long flags; + + /* Disable ISR for OTG host mode */ + if (udc->stopped) + return IRQ_NONE; + spin_lock_irqsave(&udc->lock, flags); + irq_src = fsl_readl(&dr_regs->usbsts) & fsl_readl(&dr_regs->usbintr); + /* Clear notification bits */ + fsl_writel(irq_src, &dr_regs->usbsts); + + /* VDBG("irq_src [0x%8x]", irq_src); */ + + /* Need to resume? */ + if (udc->usb_state == USB_STATE_SUSPENDED) + if ((fsl_readl(&dr_regs->portsc1) & PORTSCX_PORT_SUSPEND) == 0) + bus_resume(udc); + + /* USB Interrupt */ + if (irq_src & USB_STS_INT) { + VDBG("Packet int"); + /* Setup package, we only support ep0 as control ep */ + if (fsl_readl(&dr_regs->endptsetupstat) & EP_SETUP_STATUS_EP0) { + tripwire_handler(udc, 0, + (u8 *) (&udc->local_setup_buff)); + setup_received_irq(udc, &udc->local_setup_buff); + status = IRQ_HANDLED; + } + + /* completion of dtd */ + if (fsl_readl(&dr_regs->endptcomplete)) { + dtd_complete_irq(udc); + status = IRQ_HANDLED; + } + } + + /* SOF (for ISO transfer) */ + if (irq_src & USB_STS_SOF) { + status = IRQ_HANDLED; + } + + /* Port Change */ + if (irq_src & USB_STS_PORT_CHANGE) { + port_change_irq(udc); + status = IRQ_HANDLED; + } + + /* Reset Received */ + if (irq_src & USB_STS_RESET) { + reset_irq(udc); + status = IRQ_HANDLED; + } + + /* Sleep Enable (Suspend) */ + if (irq_src & USB_STS_SUSPEND) { + suspend_irq(udc); + status = IRQ_HANDLED; + } + + if (irq_src & (USB_STS_ERR | USB_STS_SYS_ERR)) { + VDBG("Error IRQ %x ", irq_src); + } + + spin_unlock_irqrestore(&udc->lock, flags); + return status; +} + +/*----------------------------------------------------------------* + * Hook to gadget drivers + * Called by initialization code of gadget drivers +*----------------------------------------------------------------*/ +int usb_gadget_register_driver(struct usb_gadget_driver *driver) +{ + int retval = -ENODEV; + unsigned long flags = 0; + + if (!udc_controller) + return -ENODEV; + + if (!driver || (driver->speed != USB_SPEED_FULL + && driver->speed != USB_SPEED_HIGH) + || !driver->bind || !driver->disconnect + || !driver->setup) + return -EINVAL; + + if (udc_controller->driver) + return -EBUSY; + + /* lock is needed but whether should use this lock or another */ + spin_lock_irqsave(&udc_controller->lock, flags); + + driver->driver.bus = 0; + /* hook up the driver */ + udc_controller->driver = driver; + udc_controller->gadget.dev.driver = &driver->driver; + spin_unlock_irqrestore(&udc_controller->lock, flags); + + /* bind udc driver to gadget driver */ + retval = driver->bind(&udc_controller->gadget); + if (retval) { + VDBG("bind to %s --> %d", driver->driver.name, retval); + udc_controller->gadget.dev.driver = 0; + udc_controller->driver = 0; + goto out; + } + + /* Enable DR IRQ reg and Set usbcmd reg Run bit */ + dr_controller_run(udc_controller); + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + printk(KERN_INFO "%s: bind to driver %s \n", + udc_controller->gadget.name, driver->driver.name); + +out: + if (retval) + printk("retval %d \n", retval); + return retval; +} +EXPORT_SYMBOL(usb_gadget_register_driver); + +/* Disconnect from gadget driver */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct fsl_ep *loop_ep; + unsigned long flags; + + if (!udc_controller) + return -ENODEV; + + if (!driver || driver != udc_controller->driver || !driver->unbind) + return -EINVAL; + +#ifdef CONFIG_USB_OTG + if (udc_controller->transceiver) + (void)otg_set_peripheral(udc_controller->transceiver, 0); +#endif + + /* stop DR, disable intr */ + dr_controller_stop(udc_controller); + + /* in fact, no needed */ + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + + /* stand operation */ + spin_lock_irqsave(&udc_controller->lock, flags); + udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + nuke(&udc_controller->eps[0], -ESHUTDOWN); + list_for_each_entry(loop_ep, &udc_controller->gadget.ep_list, + ep.ep_list) + nuke(loop_ep, -ESHUTDOWN); + spin_unlock_irqrestore(&udc_controller->lock, flags); + + /* unbind gadget and unhook driver. */ + driver->unbind(&udc_controller->gadget); + udc_controller->gadget.dev.driver = 0; + udc_controller->driver = 0; + + printk("unregistered gadget driver '%s'\r\n", driver->driver.name); + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); + +/*------------------------------------------------------------------------- + PROC File System Support +-------------------------------------------------------------------------*/ +#ifdef CONFIG_USB_GADGET_DEBUG_FILES + +#include <linux/seq_file.h> + +static const char proc_filename[] = "driver/fsl_usb2_udc"; + +static int fsl_proc_read(char *page, char **start, off_t off, int count, + int *eof, void *_dev) +{ + char *buf = page; + char *next = buf; + unsigned size = count; + unsigned long flags; + int t, i; + u32 tmp_reg; + struct fsl_ep *ep = NULL; + struct fsl_req *req; + + struct fsl_udc *udc = udc_controller; + if (off != 0) + return 0; + + spin_lock_irqsave(&udc->lock, flags); + + /* ------basic driver infomation ---- */ + t = scnprintf(next, size, + DRIVER_DESC "\n" + "%s version: %s\n" + "Gadget driver: %s\n\n", + driver_name, DRIVER_VERSION, + udc->driver ? udc->driver->driver.name : "(none)"); + size -= t; + next += t; + + /* ------ DR Registers ----- */ + tmp_reg = fsl_readl(&dr_regs->usbcmd); + t = scnprintf(next, size, + "USBCMD reg:\n" + "SetupTW: %d\n" + "Run/Stop: %s\n\n", + (tmp_reg & USB_CMD_SUTW) ? 1 : 0, + (tmp_reg & USB_CMD_RUN_STOP) ? "Run" : "Stop"); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->usbsts); + t = scnprintf(next, size, + "USB Status Reg:\n" + "Dr Suspend: %d" "Reset Received: %d" "System Error: %s" + "USB Error Interrupt: %s\n\n", + (tmp_reg & USB_STS_SUSPEND) ? 1 : 0, + (tmp_reg & USB_STS_RESET) ? 1 : 0, + (tmp_reg & USB_STS_SYS_ERR) ? "Err" : "Normal", + (tmp_reg & USB_STS_ERR) ? "Err detected" : "No err"); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->usbintr); + t = scnprintf(next, size, + "USB Intrrupt Enable Reg:\n" + "Sleep Enable: %d" "SOF Received Enable: %d" + "Reset Enable: %d\n" + "System Error Enable: %d" + "Port Change Dectected Enable: %d\n" + "USB Error Intr Enable: %d" "USB Intr Enable: %d\n\n", + (tmp_reg & USB_INTR_DEVICE_SUSPEND) ? 1 : 0, + (tmp_reg & USB_INTR_SOF_EN) ? 1 : 0, + (tmp_reg & USB_INTR_RESET_EN) ? 1 : 0, + (tmp_reg & USB_INTR_SYS_ERR_EN) ? 1 : 0, + (tmp_reg & USB_INTR_PTC_DETECT_EN) ? 1 : 0, + (tmp_reg & USB_INTR_ERR_INT_EN) ? 1 : 0, + (tmp_reg & USB_INTR_INT_EN) ? 1 : 0); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->frindex); + t = scnprintf(next, size, + "USB Frame Index Reg:" "Frame Number is 0x%x\n\n", + (tmp_reg & USB_FRINDEX_MASKS)); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->deviceaddr); + t = scnprintf(next, size, + "USB Device Address Reg:" "Device Addr is 0x%x\n\n", + (tmp_reg & USB_DEVICE_ADDRESS_MASK)); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->endpointlistaddr); + t = scnprintf(next, size, + "USB Endpoint List Address Reg:" + "Device Addr is 0x%x\n\n", + (tmp_reg & USB_EP_LIST_ADDRESS_MASK)); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->portsc1); + t = scnprintf(next, size, + "USB Port Status&Control Reg:\n" + "Port Transceiver Type : %s" "Port Speed: %s \n" + "PHY Low Power Suspend: %s" "Port Reset: %s" + "Port Suspend Mode: %s \n" "Over-current Change: %s" + "Port Enable/Disable Change: %s\n" + "Port Enabled/Disabled: %s" + "Current Connect Status: %s\n\n", ( { + char *s; + switch (tmp_reg & PORTSCX_PTS_FSLS) { + case PORTSCX_PTS_UTMI: + s = "UTMI"; break; + case PORTSCX_PTS_ULPI: + s = "ULPI "; break; + case PORTSCX_PTS_FSLS: + s = "FS/LS Serial"; break; + default: + s = "None"; break; + } + s;} ), ( { + char *s; + switch (tmp_reg & PORTSCX_PORT_SPEED_UNDEF) { + case PORTSCX_PORT_SPEED_FULL: + s = "Full Speed"; break; + case PORTSCX_PORT_SPEED_LOW: + s = "Low Speed"; break; + case PORTSCX_PORT_SPEED_HIGH: + s = "High Speed"; break; + default: + s = "Undefined"; break; + } + s; + } ), + (tmp_reg & PORTSCX_PHY_LOW_POWER_SPD) ? + "Normal PHY mode" : "Low power mode", + (tmp_reg & PORTSCX_PORT_RESET) ? "In Reset" : + "Not in Reset", + (tmp_reg & PORTSCX_PORT_SUSPEND) ? "In " : "Not in", + (tmp_reg & PORTSCX_OVER_CURRENT_CHG) ? "Dected" : + "No", + (tmp_reg & PORTSCX_PORT_EN_DIS_CHANGE) ? "Disable" : + "Not change", + (tmp_reg & PORTSCX_PORT_ENABLE) ? "Enable" : + "Not correct", + (tmp_reg & PORTSCX_CURRENT_CONNECT_STATUS) ? + "Attached" : "Not-Att"); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->usbmode); + t = scnprintf(next, size, + "USB Mode Reg:" "Controller Mode is : %s\n\n", ( { + char *s; + switch (tmp_reg & USB_MODE_CTRL_MODE_HOST) { + case USB_MODE_CTRL_MODE_IDLE: + s = "Idle"; break; + case USB_MODE_CTRL_MODE_DEVICE: + s = "Device Controller"; break; + case USB_MODE_CTRL_MODE_HOST: + s = "Host Controller"; break; + default: + s = "None"; break; + } + s; + } )); + size -= t; + next += t; + + tmp_reg = fsl_readl(&dr_regs->endptsetupstat); + t = scnprintf(next, size, + "Endpoint Setup Status Reg:" "SETUP on ep 0x%x\n\n", + (tmp_reg & EP_SETUP_STATUS_MASK)); + size -= t; + next += t; + + for (i = 0; i < udc->max_ep / 2; i++) { + tmp_reg = fsl_readl(&dr_regs->endptctrl[i]); + t = scnprintf(next, size, "EP Ctrl Reg [0x%x]: = [0x%x]\n", + i, tmp_reg); + size -= t; + next += t; + } + tmp_reg = fsl_readl(&dr_regs->endpointprime); + t = scnprintf(next, size, "EP Prime Reg = [0x%x]\n", tmp_reg); + size -= t; + next += t; + + tmp_reg = usb_sys_regs->snoop1; + t = scnprintf(next, size, "\nSnoop1 Reg : = [0x%x]\n\n", tmp_reg); + size -= t; + next += t; + + tmp_reg = usb_sys_regs->control; + t = scnprintf(next, size, "General Control Reg : = [0x%x]\n\n", + tmp_reg); + size -= t; + next += t; + + /* ------fsl_udc, fsl_ep, fsl_request structure information ----- */ + ep = &udc->eps[0]; + t = scnprintf(next, size, "For %s Maxpkt is 0x%x index is 0x%x\n", + ep->ep.name, ep_maxpacket(ep), ep_index(ep)); + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, "its req queue is empty\n\n"); + size -= t; + next += t; + } else { + list_for_each_entry(req, &ep->queue, queue) { + t = scnprintf(next, size, + "req %p actual 0x%x length 0x%x buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + size -= t; + next += t; + } + } + /* other gadget->eplist ep */ + list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) { + if (ep->desc) { + t = scnprintf(next, size, + "\nFor %s Maxpkt is 0x%x " + "index is 0x%x\n", + ep->ep.name, ep_maxpacket(ep), + ep_index(ep)); + size -= t; + next += t; + + if (list_empty(&ep->queue)) { + t = scnprintf(next, size, + "its req queue is empty\n\n"); + size -= t; + next += t; + } else { + list_for_each_entry(req, &ep->queue, queue) { + t = scnprintf(next, size, + "req %p actual 0x%x length" + "0x%x buf %p\n", + &req->req, req->req.actual, + req->req.length, req->req.buf); + size -= t; + next += t; + } /* end for each_entry of ep req */ + } /* end for else */ + } /* end for if(ep->queue) */ + } /* end (ep->desc) */ + + spin_unlock_irqrestore(&udc->lock, flags); + + *eof = 1; + return count - size; +} + +#define create_proc_file() create_proc_read_entry(proc_filename, \ + 0, NULL, fsl_proc_read, NULL) + +#define remove_proc_file() remove_proc_entry(proc_filename, NULL) + +#else /* !CONFIG_USB_GADGET_DEBUG_FILES */ + +#define create_proc_file() do {} while (0) +#define remove_proc_file() do {} while (0) + +#endif /* CONFIG_USB_GADGET_DEBUG_FILES */ + +/*-------------------------------------------------------------------------*/ + +/* Release udc structures */ +static void fsl_udc_release(struct device *dev) +{ + complete(udc_controller->done); + dma_free_coherent(dev, udc_controller->ep_qh_size, + udc_controller->ep_qh, udc_controller->ep_qh_dma); + kfree(udc_controller); +} + +/****************************************************************** + Internal structure setup functions +*******************************************************************/ +/*------------------------------------------------------------------ + * init resource for globle controller + * Return the udc handle on success or NULL on failure + ------------------------------------------------------------------*/ +static struct fsl_udc *__init struct_udc_setup(struct platform_device *pdev) +{ + struct fsl_udc *udc; + struct fsl_usb2_platform_data *pdata; + size_t size; + + udc = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL); + if (udc == NULL) { + ERR("malloc udc failed\n"); + return NULL; + } + + pdata = pdev->dev.platform_data; + udc->phy_mode = pdata->phy_mode; + /* max_ep_nr is bidirectional ep number, max_ep doubles the number */ + udc->max_ep = pdata->max_ep_nr * 2; + + udc->eps = kzalloc(sizeof(struct fsl_ep) * udc->max_ep, GFP_KERNEL); + if (!udc->eps) { + ERR("malloc fsl_ep failed\n"); + goto cleanup; + } + + /* initialized QHs, take care of alignment */ + size = udc->max_ep * sizeof(struct ep_queue_head); + if (size < QH_ALIGNMENT) + size = QH_ALIGNMENT; + else if ((size % QH_ALIGNMENT) != 0) { + size += QH_ALIGNMENT + 1; + size &= ~(QH_ALIGNMENT - 1); + } + udc->ep_qh = dma_alloc_coherent(&pdev->dev, size, + &udc->ep_qh_dma, GFP_KERNEL); + if (!udc->ep_qh) { + ERR("malloc QHs for udc failed\n"); + kfree(udc->eps); + goto cleanup; + } + + udc->ep_qh_size = size; + + /* Initialize ep0 status request structure */ + /* FIXME: fsl_alloc_request() ignores ep argument */ + udc->status_req = container_of(fsl_alloc_request(NULL, GFP_KERNEL), + struct fsl_req, req); + /* allocate a small amount of memory to get valid address */ + udc->status_req->req.buf = kmalloc(8, GFP_KERNEL); + udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf); + + udc->resume_state = USB_STATE_NOTATTACHED; + udc->usb_state = USB_STATE_POWERED; + udc->ep0_dir = 0; + udc->remote_wakeup = 0; /* default to 0 on reset */ + spin_lock_init(&udc->lock); + + return udc; + +cleanup: + kfree(udc); + return NULL; +} + +/*---------------------------------------------------------------- + * Setup the fsl_ep struct for eps + * Link fsl_ep->ep to gadget->ep_list + * ep0out is not used so do nothing here + * ep0in should be taken care + *--------------------------------------------------------------*/ +static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index, + char *name, int link) +{ + struct fsl_ep *ep = &udc->eps[index]; + + ep->udc = udc; + strcpy(ep->name, name); + ep->ep.name = ep->name; + + ep->ep.ops = &fsl_ep_ops; + ep->stopped = 0; + + /* for ep0: maxP defined in desc + * for other eps, maxP is set by epautoconfig() called by gadget layer + */ + ep->ep.maxpacket = (unsigned short) ~0; + + /* the queue lists any req for this ep */ + INIT_LIST_HEAD(&ep->queue); + + /* gagdet.ep_list used for ep_autoconfig so no ep0 */ + if (link) + list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); + ep->gadget = &udc->gadget; + ep->qh = &udc->ep_qh[index]; + + return 0; +} + +/* Driver probe function + * all intialize operations implemented here except enabling usb_intr reg + */ +static int __init fsl_udc_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret = -ENODEV; + unsigned int i; + + if (strcmp(pdev->name, driver_name)) { + VDBG("Wrong device\n"); + return -ENODEV; + } + + /* board setup should have been done in the platform code */ + + /* Initialize the udc structure including QH member and other member */ + udc_controller = struct_udc_setup(pdev); + if (!udc_controller) { + VDBG("udc_controller is NULL \n"); + return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + if (!request_mem_region(res->start, res->end - res->start + 1, + driver_name)) { + ERR("request mem region for %s failed \n", pdev->name); + return -EBUSY; + } + + dr_regs = ioremap(res->start, res->end - res->start + 1); + if (!dr_regs) { + ret = -ENOMEM; + goto err1; + } + + usb_sys_regs = (struct usb_sys_interface *) + ((u32)dr_regs + USB_DR_SYS_OFFSET); + + udc_controller->irq = platform_get_irq(pdev, 0); + if (!udc_controller->irq) { + ret = -ENODEV; + goto err2; + } + + ret = request_irq(udc_controller->irq, fsl_udc_irq, SA_SHIRQ, + driver_name, udc_controller); + if (ret != 0) { + ERR("cannot request irq %d err %d \n", + udc_controller->irq, ret); + goto err2; + } + + /* initialize usb hw reg except for regs for EP, + * leave usbintr reg untouched */ + dr_controller_setup(udc_controller); + + /* Setup gadget structure */ + udc_controller->gadget.ops = &fsl_gadget_ops; + udc_controller->gadget.is_dualspeed = 1; + udc_controller->gadget.ep0 = &udc_controller->eps[0].ep; + INIT_LIST_HEAD(&udc_controller->gadget.ep_list); + udc_controller->gadget.speed = USB_SPEED_UNKNOWN; + udc_controller->gadget.name = driver_name; + + /* Setup gadget.dev and register with kernel */ + strcpy(udc_controller->gadget.dev.bus_id, "gadget"); + udc_controller->gadget.dev.release = fsl_udc_release; + udc_controller->gadget.dev.parent = &pdev->dev; + ret = device_register(&udc_controller->gadget.dev); + if (ret < 0) + goto err3; + + /* setup QH and epctrl for ep0 */ + ep0_setup(udc_controller); + + /* setup udc->eps[] for ep0 */ + struct_ep_setup(udc_controller, 0, "ep0", 0); + /* for ep0: the desc defined here; + * for other eps, gadget layer called ep_enable with defined desc + */ + udc_controller->eps[0].desc = &fsl_ep0_desc; + udc_controller->eps[0].ep.maxpacket = USB_MAX_CTRL_PAYLOAD; + + /* setup the udc->eps[] for non-control endpoints and link + * to gadget.ep_list */ + for (i = 1; i < (int)(udc_controller->max_ep / 2); i++) { + char name[14]; + + sprintf(name, "ep%dout", i); + struct_ep_setup(udc_controller, i * 2, name, 1); + sprintf(name, "ep%din", i); + struct_ep_setup(udc_controller, i * 2 + 1, name, 1); + } + + /* use dma_pool for TD management */ + udc_controller->td_pool = dma_pool_create("udc_td", &pdev->dev, + sizeof(struct ep_td_struct), + DTD_ALIGNMENT, UDC_DMA_BOUNDARY); + if (udc_controller->td_pool == NULL) { + ret = -ENOMEM; + goto err4; + } + create_proc_file(); + return 0; + +err4: + device_unregister(&udc_controller->gadget.dev); +err3: + free_irq(udc_controller->irq, udc_controller); +err2: + iounmap(dr_regs); +err1: + release_mem_region(res->start, res->end - res->start + 1); + return ret; +} + +/* Driver removal function + * Free resources and finish pending transactions + */ +static int __exit fsl_udc_remove(struct platform_device *pdev) +{ + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + DECLARE_COMPLETION(done); + + if (!udc_controller) + return -ENODEV; + udc_controller->done = &done; + + /* DR has been stopped in usb_gadget_unregister_driver() */ + remove_proc_file(); + + /* Free allocated memory */ + kfree(udc_controller->status_req->req.buf); + kfree(udc_controller->status_req); + kfree(udc_controller->eps); + + dma_pool_destroy(udc_controller->td_pool); + free_irq(udc_controller->irq, udc_controller); + iounmap(dr_regs); + release_mem_region(res->start, res->end - res->start + 1); + + device_unregister(&udc_controller->gadget.dev); + /* free udc --wait for the release() finished */ + wait_for_completion(&done); + + return 0; +} + +/*----------------------------------------------------------------- + * Modify Power management attributes + * Used by OTG statemachine to disable gadget temporarily + -----------------------------------------------------------------*/ +static int fsl_udc_suspend(struct platform_device *pdev, pm_message_t state) +{ + dr_controller_stop(udc_controller); + return 0; +} + +/*----------------------------------------------------------------- + * Invoked on USB resume. May be called in_interrupt. + * Here we start the DR controller and enable the irq + *-----------------------------------------------------------------*/ +static int fsl_udc_resume(struct platform_device *pdev) +{ + /* Enable DR irq reg and set controller Run */ + if (udc_controller->stopped) { + dr_controller_setup(udc_controller); + dr_controller_run(udc_controller); + } + udc_controller->usb_state = USB_STATE_ATTACHED; + udc_controller->ep0_state = WAIT_FOR_SETUP; + udc_controller->ep0_dir = 0; + return 0; +} + +/*------------------------------------------------------------------------- + Register entry point for the peripheral controller driver +--------------------------------------------------------------------------*/ + +static struct platform_driver udc_driver = { + .remove = __exit_p(fsl_udc_remove), + /* these suspend and resume are not usb suspend and resume */ + .suspend = fsl_udc_suspend, + .resume = fsl_udc_resume, + .driver = { + .name = (char *)driver_name, + .owner = THIS_MODULE, + }, +}; + +static int __init udc_init(void) +{ + printk(KERN_INFO "%s (%s)\n", driver_desc, DRIVER_VERSION); + return platform_driver_probe(&udc_driver, fsl_udc_probe); +} + +module_init(udc_init); + +static void __exit udc_exit(void) +{ + platform_driver_unregister(&udc_driver); + printk("%s unregistered \n", driver_desc); +} + +module_exit(udc_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h new file mode 100644 index 000000000000..c6291e046507 --- /dev/null +++ b/drivers/usb/gadget/fsl_usb2_udc.h @@ -0,0 +1,579 @@ +/* + * Freescale USB device/endpoint management registers + */ +#ifndef __FSL_USB2_UDC_H +#define __FSL_USB2_UDC_H + +/* ### define USB registers here + */ +#define USB_MAX_CTRL_PAYLOAD 64 +#define USB_DR_SYS_OFFSET 0x400 + + /* USB DR device mode registers (Little Endian) */ +struct usb_dr_device { + /* Capability register */ + u8 res1[256]; + u16 caplength; /* Capability Register Length */ + u16 hciversion; /* Host Controller Interface Version */ + u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hccparams; /* Host Controller Capability Parameters */ + u8 res2[20]; + u32 dciversion; /* Device Controller Interface Version */ + u32 dccparams; /* Device Controller Capability Parameters */ + u8 res3[24]; + /* Operation register */ + u32 usbcmd; /* USB Command Register */ + u32 usbsts; /* USB Status Register */ + u32 usbintr; /* USB Interrupt Enable Register */ + u32 frindex; /* Frame Index Register */ + u8 res4[4]; + u32 deviceaddr; /* Device Address */ + u32 endpointlistaddr; /* Endpoint List Address Register */ + u8 res5[4]; + u32 burstsize; /* Master Interface Data Burst Size Register */ + u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ + u8 res6[24]; + u32 configflag; /* Configure Flag Register */ + u32 portsc1; /* Port 1 Status and Control Register */ + u8 res7[28]; + u32 otgsc; /* On-The-Go Status and Control */ + u32 usbmode; /* USB Mode Register */ + u32 endptsetupstat; /* Endpoint Setup Status Register */ + u32 endpointprime; /* Endpoint Initialization Register */ + u32 endptflush; /* Endpoint Flush Register */ + u32 endptstatus; /* Endpoint Status Register */ + u32 endptcomplete; /* Endpoint Complete Register */ + u32 endptctrl[6]; /* Endpoint Control Registers */ +}; + + /* USB DR host mode registers (Little Endian) */ +struct usb_dr_host { + /* Capability register */ + u8 res1[256]; + u16 caplength; /* Capability Register Length */ + u16 hciversion; /* Host Controller Interface Version */ + u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hccparams; /* Host Controller Capability Parameters */ + u8 res2[20]; + u32 dciversion; /* Device Controller Interface Version */ + u32 dccparams; /* Device Controller Capability Parameters */ + u8 res3[24]; + /* Operation register */ + u32 usbcmd; /* USB Command Register */ + u32 usbsts; /* USB Status Register */ + u32 usbintr; /* USB Interrupt Enable Register */ + u32 frindex; /* Frame Index Register */ + u8 res4[4]; + u32 periodiclistbase; /* Periodic Frame List Base Address Register */ + u32 asynclistaddr; /* Current Asynchronous List Address Register */ + u8 res5[4]; + u32 burstsize; /* Master Interface Data Burst Size Register */ + u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ + u8 res6[24]; + u32 configflag; /* Configure Flag Register */ + u32 portsc1; /* Port 1 Status and Control Register */ + u8 res7[28]; + u32 otgsc; /* On-The-Go Status and Control */ + u32 usbmode; /* USB Mode Register */ + u32 endptsetupstat; /* Endpoint Setup Status Register */ + u32 endpointprime; /* Endpoint Initialization Register */ + u32 endptflush; /* Endpoint Flush Register */ + u32 endptstatus; /* Endpoint Status Register */ + u32 endptcomplete; /* Endpoint Complete Register */ + u32 endptctrl[6]; /* Endpoint Control Registers */ +}; + + /* non-EHCI USB system interface registers (Big Endian) */ +struct usb_sys_interface { + u32 snoop1; + u32 snoop2; + u32 age_cnt_thresh; /* Age Count Threshold Register */ + u32 pri_ctrl; /* Priority Control Register */ + u32 si_ctrl; /* System Interface Control Register */ + u8 res[236]; + u32 control; /* General Purpose Control Register */ +}; + +/* ep0 transfer state */ +#define WAIT_FOR_SETUP 0 +#define DATA_STATE_XMIT 1 +#define DATA_STATE_NEED_ZLP 2 +#define WAIT_FOR_OUT_STATUS 3 +#define DATA_STATE_RECV 4 + +/* Frame Index Register Bit Masks */ +#define USB_FRINDEX_MASKS 0x3fff +/* USB CMD Register Bit Masks */ +#define USB_CMD_RUN_STOP 0x00000001 +#define USB_CMD_CTRL_RESET 0x00000002 +#define USB_CMD_PERIODIC_SCHEDULE_EN 0x00000010 +#define USB_CMD_ASYNC_SCHEDULE_EN 0x00000020 +#define USB_CMD_INT_AA_DOORBELL 0x00000040 +#define USB_CMD_ASP 0x00000300 +#define USB_CMD_ASYNC_SCH_PARK_EN 0x00000800 +#define USB_CMD_SUTW 0x00002000 +#define USB_CMD_ATDTW 0x00004000 +#define USB_CMD_ITC 0x00FF0000 + +/* bit 15,3,2 are frame list size */ +#define USB_CMD_FRAME_SIZE_1024 0x00000000 +#define USB_CMD_FRAME_SIZE_512 0x00000004 +#define USB_CMD_FRAME_SIZE_256 0x00000008 +#define USB_CMD_FRAME_SIZE_128 0x0000000C +#define USB_CMD_FRAME_SIZE_64 0x00008000 +#define USB_CMD_FRAME_SIZE_32 0x00008004 +#define USB_CMD_FRAME_SIZE_16 0x00008008 +#define USB_CMD_FRAME_SIZE_8 0x0000800C + +/* bit 9-8 are async schedule park mode count */ +#define USB_CMD_ASP_00 0x00000000 +#define USB_CMD_ASP_01 0x00000100 +#define USB_CMD_ASP_10 0x00000200 +#define USB_CMD_ASP_11 0x00000300 +#define USB_CMD_ASP_BIT_POS 8 + +/* bit 23-16 are interrupt threshold control */ +#define USB_CMD_ITC_NO_THRESHOLD 0x00000000 +#define USB_CMD_ITC_1_MICRO_FRM 0x00010000 +#define USB_CMD_ITC_2_MICRO_FRM 0x00020000 +#define USB_CMD_ITC_4_MICRO_FRM 0x00040000 +#define USB_CMD_ITC_8_MICRO_FRM 0x00080000 +#define USB_CMD_ITC_16_MICRO_FRM 0x00100000 +#define USB_CMD_ITC_32_MICRO_FRM 0x00200000 +#define USB_CMD_ITC_64_MICRO_FRM 0x00400000 +#define USB_CMD_ITC_BIT_POS 16 + +/* USB STS Register Bit Masks */ +#define USB_STS_INT 0x00000001 +#define USB_STS_ERR 0x00000002 +#define USB_STS_PORT_CHANGE 0x00000004 +#define USB_STS_FRM_LST_ROLL 0x00000008 +#define USB_STS_SYS_ERR 0x00000010 +#define USB_STS_IAA 0x00000020 +#define USB_STS_RESET 0x00000040 +#define USB_STS_SOF 0x00000080 +#define USB_STS_SUSPEND 0x00000100 +#define USB_STS_HC_HALTED 0x00001000 +#define USB_STS_RCL 0x00002000 +#define USB_STS_PERIODIC_SCHEDULE 0x00004000 +#define USB_STS_ASYNC_SCHEDULE 0x00008000 + +/* USB INTR Register Bit Masks */ +#define USB_INTR_INT_EN 0x00000001 +#define USB_INTR_ERR_INT_EN 0x00000002 +#define USB_INTR_PTC_DETECT_EN 0x00000004 +#define USB_INTR_FRM_LST_ROLL_EN 0x00000008 +#define USB_INTR_SYS_ERR_EN 0x00000010 +#define USB_INTR_ASYN_ADV_EN 0x00000020 +#define USB_INTR_RESET_EN 0x00000040 +#define USB_INTR_SOF_EN 0x00000080 +#define USB_INTR_DEVICE_SUSPEND 0x00000100 + +/* Device Address bit masks */ +#define USB_DEVICE_ADDRESS_MASK 0xFE000000 +#define USB_DEVICE_ADDRESS_BIT_POS 25 + +/* endpoint list address bit masks */ +#define USB_EP_LIST_ADDRESS_MASK 0xfffff800 + +/* PORTSCX Register Bit Masks */ +#define PORTSCX_CURRENT_CONNECT_STATUS 0x00000001 +#define PORTSCX_CONNECT_STATUS_CHANGE 0x00000002 +#define PORTSCX_PORT_ENABLE 0x00000004 +#define PORTSCX_PORT_EN_DIS_CHANGE 0x00000008 +#define PORTSCX_OVER_CURRENT_ACT 0x00000010 +#define PORTSCX_OVER_CURRENT_CHG 0x00000020 +#define PORTSCX_PORT_FORCE_RESUME 0x00000040 +#define PORTSCX_PORT_SUSPEND 0x00000080 +#define PORTSCX_PORT_RESET 0x00000100 +#define PORTSCX_LINE_STATUS_BITS 0x00000C00 +#define PORTSCX_PORT_POWER 0x00001000 +#define PORTSCX_PORT_INDICTOR_CTRL 0x0000C000 +#define PORTSCX_PORT_TEST_CTRL 0x000F0000 +#define PORTSCX_WAKE_ON_CONNECT_EN 0x00100000 +#define PORTSCX_WAKE_ON_CONNECT_DIS 0x00200000 +#define PORTSCX_WAKE_ON_OVER_CURRENT 0x00400000 +#define PORTSCX_PHY_LOW_POWER_SPD 0x00800000 +#define PORTSCX_PORT_FORCE_FULL_SPEED 0x01000000 +#define PORTSCX_PORT_SPEED_MASK 0x0C000000 +#define PORTSCX_PORT_WIDTH 0x10000000 +#define PORTSCX_PHY_TYPE_SEL 0xC0000000 + +/* bit 11-10 are line status */ +#define PORTSCX_LINE_STATUS_SE0 0x00000000 +#define PORTSCX_LINE_STATUS_JSTATE 0x00000400 +#define PORTSCX_LINE_STATUS_KSTATE 0x00000800 +#define PORTSCX_LINE_STATUS_UNDEF 0x00000C00 +#define PORTSCX_LINE_STATUS_BIT_POS 10 + +/* bit 15-14 are port indicator control */ +#define PORTSCX_PIC_OFF 0x00000000 +#define PORTSCX_PIC_AMBER 0x00004000 +#define PORTSCX_PIC_GREEN 0x00008000 +#define PORTSCX_PIC_UNDEF 0x0000C000 +#define PORTSCX_PIC_BIT_POS 14 + +/* bit 19-16 are port test control */ +#define PORTSCX_PTC_DISABLE 0x00000000 +#define PORTSCX_PTC_JSTATE 0x00010000 +#define PORTSCX_PTC_KSTATE 0x00020000 +#define PORTSCX_PTC_SEQNAK 0x00030000 +#define PORTSCX_PTC_PACKET 0x00040000 +#define PORTSCX_PTC_FORCE_EN 0x00050000 +#define PORTSCX_PTC_BIT_POS 16 + +/* bit 27-26 are port speed */ +#define PORTSCX_PORT_SPEED_FULL 0x00000000 +#define PORTSCX_PORT_SPEED_LOW 0x04000000 +#define PORTSCX_PORT_SPEED_HIGH 0x08000000 +#define PORTSCX_PORT_SPEED_UNDEF 0x0C000000 +#define PORTSCX_SPEED_BIT_POS 26 + +/* bit 28 is parallel transceiver width for UTMI interface */ +#define PORTSCX_PTW 0x10000000 +#define PORTSCX_PTW_8BIT 0x00000000 +#define PORTSCX_PTW_16BIT 0x10000000 + +/* bit 31-30 are port transceiver select */ +#define PORTSCX_PTS_UTMI 0x00000000 +#define PORTSCX_PTS_ULPI 0x80000000 +#define PORTSCX_PTS_FSLS 0xC0000000 +#define PORTSCX_PTS_BIT_POS 30 + +/* otgsc Register Bit Masks */ +#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 +#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 +#define OTGSC_CTRL_OTG_TERM 0x00000008 +#define OTGSC_CTRL_DATA_PULSING 0x00000010 +#define OTGSC_STS_USB_ID 0x00000100 +#define OTGSC_STS_A_VBUS_VALID 0x00000200 +#define OTGSC_STS_A_SESSION_VALID 0x00000400 +#define OTGSC_STS_B_SESSION_VALID 0x00000800 +#define OTGSC_STS_B_SESSION_END 0x00001000 +#define OTGSC_STS_1MS_TOGGLE 0x00002000 +#define OTGSC_STS_DATA_PULSING 0x00004000 +#define OTGSC_INTSTS_USB_ID 0x00010000 +#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 +#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 +#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 +#define OTGSC_INTSTS_B_SESSION_END 0x00100000 +#define OTGSC_INTSTS_1MS 0x00200000 +#define OTGSC_INTSTS_DATA_PULSING 0x00400000 +#define OTGSC_INTR_USB_ID 0x01000000 +#define OTGSC_INTR_A_VBUS_VALID 0x02000000 +#define OTGSC_INTR_A_SESSION_VALID 0x04000000 +#define OTGSC_INTR_B_SESSION_VALID 0x08000000 +#define OTGSC_INTR_B_SESSION_END 0x10000000 +#define OTGSC_INTR_1MS_TIMER 0x20000000 +#define OTGSC_INTR_DATA_PULSING 0x40000000 + +/* USB MODE Register Bit Masks */ +#define USB_MODE_CTRL_MODE_IDLE 0x00000000 +#define USB_MODE_CTRL_MODE_DEVICE 0x00000002 +#define USB_MODE_CTRL_MODE_HOST 0x00000003 +#define USB_MODE_CTRL_MODE_RSV 0x00000001 +#define USB_MODE_SETUP_LOCK_OFF 0x00000008 +#define USB_MODE_STREAM_DISABLE 0x00000010 +/* Endpoint Flush Register */ +#define EPFLUSH_TX_OFFSET 0x00010000 +#define EPFLUSH_RX_OFFSET 0x00000000 + +/* Endpoint Setup Status bit masks */ +#define EP_SETUP_STATUS_MASK 0x0000003F +#define EP_SETUP_STATUS_EP0 0x00000001 + +/* ENDPOINTCTRLx Register Bit Masks */ +#define EPCTRL_TX_ENABLE 0x00800000 +#define EPCTRL_TX_DATA_TOGGLE_RST 0x00400000 /* Not EP0 */ +#define EPCTRL_TX_DATA_TOGGLE_INH 0x00200000 /* Not EP0 */ +#define EPCTRL_TX_TYPE 0x000C0000 +#define EPCTRL_TX_DATA_SOURCE 0x00020000 /* Not EP0 */ +#define EPCTRL_TX_EP_STALL 0x00010000 +#define EPCTRL_RX_ENABLE 0x00000080 +#define EPCTRL_RX_DATA_TOGGLE_RST 0x00000040 /* Not EP0 */ +#define EPCTRL_RX_DATA_TOGGLE_INH 0x00000020 /* Not EP0 */ +#define EPCTRL_RX_TYPE 0x0000000C +#define EPCTRL_RX_DATA_SINK 0x00000002 /* Not EP0 */ +#define EPCTRL_RX_EP_STALL 0x00000001 + +/* bit 19-18 and 3-2 are endpoint type */ +#define EPCTRL_EP_TYPE_CONTROL 0 +#define EPCTRL_EP_TYPE_ISO 1 +#define EPCTRL_EP_TYPE_BULK 2 +#define EPCTRL_EP_TYPE_INTERRUPT 3 +#define EPCTRL_TX_EP_TYPE_SHIFT 18 +#define EPCTRL_RX_EP_TYPE_SHIFT 2 + +/* SNOOPn Register Bit Masks */ +#define SNOOP_ADDRESS_MASK 0xFFFFF000 +#define SNOOP_SIZE_ZERO 0x00 /* snooping disable */ +#define SNOOP_SIZE_4KB 0x0B /* 4KB snoop size */ +#define SNOOP_SIZE_8KB 0x0C +#define SNOOP_SIZE_16KB 0x0D +#define SNOOP_SIZE_32KB 0x0E +#define SNOOP_SIZE_64KB 0x0F +#define SNOOP_SIZE_128KB 0x10 +#define SNOOP_SIZE_256KB 0x11 +#define SNOOP_SIZE_512KB 0x12 +#define SNOOP_SIZE_1MB 0x13 +#define SNOOP_SIZE_2MB 0x14 +#define SNOOP_SIZE_4MB 0x15 +#define SNOOP_SIZE_8MB 0x16 +#define SNOOP_SIZE_16MB 0x17 +#define SNOOP_SIZE_32MB 0x18 +#define SNOOP_SIZE_64MB 0x19 +#define SNOOP_SIZE_128MB 0x1A +#define SNOOP_SIZE_256MB 0x1B +#define SNOOP_SIZE_512MB 0x1C +#define SNOOP_SIZE_1GB 0x1D +#define SNOOP_SIZE_2GB 0x1E /* 2GB snoop size */ + +/* pri_ctrl Register Bit Masks */ +#define PRI_CTRL_PRI_LVL1 0x0000000C +#define PRI_CTRL_PRI_LVL0 0x00000003 + +/* si_ctrl Register Bit Masks */ +#define SI_CTRL_ERR_DISABLE 0x00000010 +#define SI_CTRL_IDRC_DISABLE 0x00000008 +#define SI_CTRL_RD_SAFE_EN 0x00000004 +#define SI_CTRL_RD_PREFETCH_DISABLE 0x00000002 +#define SI_CTRL_RD_PREFEFETCH_VAL 0x00000001 + +/* control Register Bit Masks */ +#define USB_CTRL_IOENB 0x00000004 +#define USB_CTRL_ULPI_INT0EN 0x00000001 + +/* Endpoint Queue Head data struct + * Rem: all the variables of qh are LittleEndian Mode + * and NEXT_POINTER_MASK should operate on a LittleEndian, Phy Addr + */ +struct ep_queue_head { + u32 max_pkt_length; /* Mult(31-30) , Zlt(29) , Max Pkt len + and IOS(15) */ + u32 curr_dtd_ptr; /* Current dTD Pointer(31-5) */ + u32 next_dtd_ptr; /* Next dTD Pointer(31-5), T(0) */ + u32 size_ioc_int_sts; /* Total bytes (30-16), IOC (15), + MultO(11-10), STS (7-0) */ + u32 buff_ptr0; /* Buffer pointer Page 0 (31-12) */ + u32 buff_ptr1; /* Buffer pointer Page 1 (31-12) */ + u32 buff_ptr2; /* Buffer pointer Page 2 (31-12) */ + u32 buff_ptr3; /* Buffer pointer Page 3 (31-12) */ + u32 buff_ptr4; /* Buffer pointer Page 4 (31-12) */ + u32 res1; + u8 setup_buffer[8]; /* Setup data 8 bytes */ + u32 res2[4]; +}; + +/* Endpoint Queue Head Bit Masks */ +#define EP_QUEUE_HEAD_MULT_POS 30 +#define EP_QUEUE_HEAD_ZLT_SEL 0x20000000 +#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS 16 +#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info) (((ep_info)>>16)&0x07ff) +#define EP_QUEUE_HEAD_IOS 0x00008000 +#define EP_QUEUE_HEAD_NEXT_TERMINATE 0x00000001 +#define EP_QUEUE_HEAD_IOC 0x00008000 +#define EP_QUEUE_HEAD_MULTO 0x00000C00 +#define EP_QUEUE_HEAD_STATUS_HALT 0x00000040 +#define EP_QUEUE_HEAD_STATUS_ACTIVE 0x00000080 +#define EP_QUEUE_CURRENT_OFFSET_MASK 0x00000FFF +#define EP_QUEUE_HEAD_NEXT_POINTER_MASK 0xFFFFFFE0 +#define EP_QUEUE_FRINDEX_MASK 0x000007FF +#define EP_MAX_LENGTH_TRANSFER 0x4000 + +/* Endpoint Transfer Descriptor data struct */ +/* Rem: all the variables of td are LittleEndian Mode */ +struct ep_td_struct { + u32 next_td_ptr; /* Next TD pointer(31-5), T(0) set + indicate invalid */ + u32 size_ioc_sts; /* Total bytes (30-16), IOC (15), + MultO(11-10), STS (7-0) */ + u32 buff_ptr0; /* Buffer pointer Page 0 */ + u32 buff_ptr1; /* Buffer pointer Page 1 */ + u32 buff_ptr2; /* Buffer pointer Page 2 */ + u32 buff_ptr3; /* Buffer pointer Page 3 */ + u32 buff_ptr4; /* Buffer pointer Page 4 */ + u32 res; + /* 32 bytes */ + dma_addr_t td_dma; /* dma address for this td */ + /* virtual address of next td specified in next_td_ptr */ + struct ep_td_struct *next_td_virt; +}; + +/* Endpoint Transfer Descriptor bit Masks */ +#define DTD_NEXT_TERMINATE 0x00000001 +#define DTD_IOC 0x00008000 +#define DTD_STATUS_ACTIVE 0x00000080 +#define DTD_STATUS_HALTED 0x00000040 +#define DTD_STATUS_DATA_BUFF_ERR 0x00000020 +#define DTD_STATUS_TRANSACTION_ERR 0x00000008 +#define DTD_RESERVED_FIELDS 0x80007300 +#define DTD_ADDR_MASK 0xFFFFFFE0 +#define DTD_PACKET_SIZE 0x7FFF0000 +#define DTD_LENGTH_BIT_POS 16 +#define DTD_ERROR_MASK (DTD_STATUS_HALTED | \ + DTD_STATUS_DATA_BUFF_ERR | \ + DTD_STATUS_TRANSACTION_ERR) +/* Alignment requirements; must be a power of two */ +#define DTD_ALIGNMENT 0x20 +#define QH_ALIGNMENT 2048 + +/* Controller dma boundary */ +#define UDC_DMA_BOUNDARY 0x1000 + +/* -----------------------------------------------------------------------*/ +/* ##### enum data +*/ +typedef enum { + e_ULPI, + e_UTMI_8BIT, + e_UTMI_16BIT, + e_SERIAL +} e_PhyInterface; + +/*-------------------------------------------------------------------------*/ + +/* ### driver private data + */ +struct fsl_req { + struct usb_request req; + struct list_head queue; + /* ep_queue() func will add + a request->queue into a udc_ep->queue 'd tail */ + struct fsl_ep *ep; + unsigned mapped:1; + + struct ep_td_struct *head, *tail; /* For dTD List + cpu endian Virtual addr */ + unsigned int dtd_count; +}; + +#define REQ_UNCOMPLETE 1 + +struct fsl_ep { + struct usb_ep ep; + struct list_head queue; + struct fsl_udc *udc; + struct ep_queue_head *qh; + const struct usb_endpoint_descriptor *desc; + struct usb_gadget *gadget; + + char name[14]; + unsigned stopped:1; +}; + +#define EP_DIR_IN 1 +#define EP_DIR_OUT 0 + +struct fsl_udc { + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + struct fsl_ep *eps; + unsigned int max_ep; + unsigned int irq; + + struct usb_ctrlrequest local_setup_buff; + spinlock_t lock; + struct otg_transceiver *transceiver; + unsigned softconnect:1; + unsigned vbus_active:1; + unsigned stopped:1; + unsigned remote_wakeup:1; + + struct ep_queue_head *ep_qh; /* Endpoints Queue-Head */ + struct fsl_req *status_req; /* ep0 status request */ + struct dma_pool *td_pool; /* dma pool for DTD */ + enum fsl_usb2_phy_modes phy_mode; + + size_t ep_qh_size; /* size after alignment adjustment*/ + dma_addr_t ep_qh_dma; /* dma address of QH */ + + u32 max_pipes; /* Device max pipes */ + u32 max_use_endpts; /* Max endpointes to be used */ + u32 bus_reset; /* Device is bus reseting */ + u32 resume_state; /* USB state to resume */ + u32 usb_state; /* USB current state */ + u32 usb_next_state; /* USB next state */ + u32 ep0_state; /* Endpoint zero state */ + u32 ep0_dir; /* Endpoint zero direction: can be + USB_DIR_IN or USB_DIR_OUT */ + u32 usb_sof_count; /* SOF count */ + u32 errors; /* USB ERRORs count */ + u8 device_address; /* Device USB address */ + + struct completion *done; /* to make sure release() is done */ +}; + +/*-------------------------------------------------------------------------*/ + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt "\n", \ + __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) do{}while(0) +#endif + +#if 0 +static void dump_msg(const char *label, const u8 * buf, unsigned int length) +{ + unsigned int start, num, i; + char line[52], *p; + + if (length >= 512) + return; + DBG("%s, length %u:\n", label, length); + start = 0; + while (length > 0) { + num = min(length, 16u); + p = line; + for (i = 0; i < num; ++i) { + if (i == 8) + *p++ = ' '; + sprintf(p, " %02x", buf[i]); + p += 3; + } + *p = 0; + printk(KERN_DEBUG "%6x: %s\n", start, line); + buf += num; + start += num; + length -= num; + } +} +#endif + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(stuff...) do{}while(0) +#endif + +#define ERR(stuff...) printk(KERN_ERR "udc: " stuff) +#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff) +#define INFO(stuff...) printk(KERN_INFO "udc: " stuff) + +/*-------------------------------------------------------------------------*/ + +/* ### Add board specific defines here + */ + +/* + * ### pipe direction macro from device view + */ +#define USB_RECV 0 /* OUT EP */ +#define USB_SEND 1 /* IN EP */ + +/* + * ### internal used help routines. + */ +#define ep_index(EP) ((EP)->desc->bEndpointAddress&0xF) +#define ep_maxpacket(EP) ((EP)->ep.maxpacket) +#define ep_is_in(EP) ( (ep_index(EP) == 0) ? (EP->udc->ep0_dir == \ + USB_DIR_IN ):((EP)->desc->bEndpointAddress \ + & USB_DIR_IN)==USB_DIR_IN) +#define get_ep_by_pipe(udc, pipe) ((pipe == 1)? &udc->eps[0]: \ + &udc->eps[pipe]) +#define get_pipe_by_windex(windex) ((windex & USB_ENDPOINT_NUMBER_MASK) \ + * 2 + ((windex & USB_DIR_IN) ? 1 : 0)) +#define get_pipe_by_ep(EP) (ep_index(EP) * 2 + ep_is_in(EP)) + +#endif diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index 2e3d6620d216..d041b919e7b8 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -99,6 +99,12 @@ #define gadget_is_imx(g) 0 #endif +#ifdef CONFIG_USB_GADGET_FSL_USB2 +#define gadget_is_fsl_usb2(g) !strcmp("fsl-usb2-udc", (g)->name) +#else +#define gadget_is_fsl_usb2(g) 0 +#endif + /* Mentor high speed function controller */ #ifdef CONFIG_USB_GADGET_MUSBHSFC #define gadget_is_musbhsfc(g) !strcmp("musbhsfc_udc", (g)->name) @@ -177,5 +183,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x17; else if (gadget_is_husb2dev(gadget)) return 0x18; + else if (gadget_is_fsl_usb2(gadget)) + return 0x19; return -ENOENT; } diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c index f01890dc8751..2c043a1ea156 100644 --- a/drivers/usb/gadget/pxa2xx_udc.c +++ b/drivers/usb/gadget/pxa2xx_udc.c @@ -71,7 +71,7 @@ * by the host to interact with this device, and allocates endpoints to * the different protocol interfaces. The controller driver virtualizes * usb hardware so that the gadget drivers will be more portable. - * + * * This UDC hardware wants to implement a bit too much USB protocol, so * it constrains the sorts of USB configuration change events that work. * The errata for these chips are misleading; some "fixed" bugs from @@ -141,7 +141,7 @@ MODULE_PARM_DESC (fifo_mode, "pxa2xx udc fifo mode"); #endif /* --------------------------------------------------------------------------- - * endpoint related parts of the api to the usb controller hardware, + * endpoint related parts of the api to the usb controller hardware, * used by gadget driver; and the inner talker-to-hardware core. * --------------------------------------------------------------------------- */ @@ -293,7 +293,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep, #ifdef USE_DMA /* for (some) bulk and ISO endpoints, try to get a DMA channel and - * bind it to the endpoint. otherwise use PIO. + * bind it to the endpoint. otherwise use PIO. */ switch (ep->bmAttributes) { case USB_ENDPOINT_XFER_ISOC: @@ -304,7 +304,7 @@ static int pxa2xx_ep_enable (struct usb_ep *_ep, if (!use_dma || !ep->reg_drcmr) break; ep->dma = pxa_request_dma ((char *)_ep->name, - (le16_to_cpu (desc->wMaxPacketSize) > 64) + (le16_to_cpu (desc->wMaxPacketSize) > 64) ? DMA_PRIO_MEDIUM /* some iso */ : DMA_PRIO_LOW, dma_nodesc_handler, ep); @@ -361,7 +361,7 @@ static int pxa2xx_ep_disable (struct usb_ep *_ep) */ /* - * pxa2xx_ep_alloc_request - allocate a request data structure + * pxa2xx_ep_alloc_request - allocate a request data structure */ static struct usb_request * pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) @@ -378,7 +378,7 @@ pxa2xx_ep_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) /* - * pxa2xx_ep_free_request - deallocate a request data structure + * pxa2xx_ep_free_request - deallocate a request data structure */ static void pxa2xx_ep_free_request (struct usb_ep *_ep, struct usb_request *_req) @@ -1031,7 +1031,7 @@ pxa2xx_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) /* - * nuke - dequeue ALL requests + * nuke - dequeue ALL requests */ static void nuke(struct pxa2xx_ep *ep, int status) { @@ -1136,16 +1136,16 @@ static int pxa2xx_ep_set_halt(struct usb_ep *_ep, int value) ep->dev->req_pending = 0; ep->dev->ep0state = EP0_STALL; - /* and bulk/intr endpoints like dropping stalls too */ - } else { - unsigned i; - for (i = 0; i < 1000; i += 20) { - if (*ep->reg_udccs & UDCCS_BI_SST) - break; - udelay(20); - } - } - local_irq_restore(flags); + /* and bulk/intr endpoints like dropping stalls too */ + } else { + unsigned i; + for (i = 0; i < 1000; i += 20) { + if (*ep->reg_udccs & UDCCS_BI_SST) + break; + udelay(20); + } + } + local_irq_restore(flags); DBG(DBG_VERBOSE, "%s halt\n", _ep->name); return 0; @@ -1216,7 +1216,7 @@ static struct usb_ep_ops pxa2xx_ep_ops = { /* --------------------------------------------------------------------------- - * device-scoped parts of the api to the usb controller hardware + * device-scoped parts of the api to the usb controller hardware * --------------------------------------------------------------------------- */ @@ -1239,7 +1239,7 @@ static void udc_enable (struct pxa2xx_udc *); static void udc_disable(struct pxa2xx_udc *); /* We disable the UDC -- and its 48 MHz clock -- whenever it's not - * in active use. + * in active use. */ static int pullup(struct pxa2xx_udc *udc, int is_active) { @@ -1464,24 +1464,10 @@ done: #endif /* CONFIG_USB_GADGET_DEBUG_FILES */ -/* "function" sysfs attribute */ -static ssize_t -show_function (struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct pxa2xx_udc *dev = dev_get_drvdata (_dev); - - if (!dev->driver - || !dev->driver->function - || strlen (dev->driver->function) > PAGE_SIZE) - return 0; - return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function); -} -static DEVICE_ATTR (function, S_IRUGO, show_function, NULL); - /*-------------------------------------------------------------------------*/ /* - * udc_disable - disable USB device controller + * udc_disable - disable USB device controller */ static void udc_disable(struct pxa2xx_udc *dev) { @@ -1507,7 +1493,7 @@ static void udc_disable(struct pxa2xx_udc *dev) /* - * udc_reinit - initialize software state + * udc_reinit - initialize software state */ static void udc_reinit(struct pxa2xx_udc *dev) { @@ -1635,18 +1621,20 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) dev->gadget.dev.driver = &driver->driver; dev->pullup = 1; - device_add (&dev->gadget.dev); + retval = device_add (&dev->gadget.dev); + if (retval) { +fail: + dev->driver = NULL; + dev->gadget.dev.driver = NULL; + return retval; + } retval = driver->bind(&dev->gadget); if (retval) { DMSG("bind to driver %s --> error %d\n", driver->driver.name, retval); device_del (&dev->gadget.dev); - - dev->driver = NULL; - dev->gadget.dev.driver = NULL; - return retval; + goto fail; } - device_create_file(dev->dev, &dev_attr_function); /* ... then enable host detection and ep0; and we're ready * for set_configuration as well as eventual disconnect. @@ -1704,7 +1692,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) dev->driver = NULL; device_del (&dev->gadget.dev); - device_remove_file(dev->dev, &dev_attr_function); DMSG("unregistered gadget driver '%s'\n", driver->driver.name); dump_state(dev); @@ -2474,12 +2461,12 @@ static struct pxa2xx_udc memory = { #define IXP465_AD 0x00000200 /* - * probe - binds to the platform device + * probe - binds to the platform device */ static int __init pxa2xx_udc_probe(struct platform_device *pdev) { struct pxa2xx_udc *dev = &memory; - int retval, out_dma = 1, vbus_irq; + int retval, out_dma = 1, vbus_irq, irq; u32 chiprev; /* insist on Intel/ARM/XScale */ @@ -2522,7 +2509,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) return -ENODEV; } - pr_debug("%s: IRQ %d%s%s%s\n", driver_name, IRQ_USB, + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return -ENODEV; + + pr_debug("%s: IRQ %d%s%s%s\n", driver_name, irq, dev->has_cfr ? "" : " (!cfr)", out_dma ? "" : " (broken dma-out)", SIZE_STR DMASTR @@ -2570,11 +2561,11 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) dev->vbus = is_vbus_present(); /* irq setup after old hardware state is cleaned up */ - retval = request_irq(IRQ_USB, pxa2xx_udc_irq, + retval = request_irq(irq, pxa2xx_udc_irq, IRQF_DISABLED, driver_name, dev); if (retval != 0) { - printk(KERN_ERR "%s: can't get irq %i, err %d\n", - driver_name, IRQ_USB, retval); + printk(KERN_ERR "%s: can't get irq %d, err %d\n", + driver_name, irq, retval); return -EBUSY; } dev->got_irq = 1; @@ -2589,7 +2580,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev) printk(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); lubbock_fail0: - free_irq(IRQ_USB, dev); + free_irq(irq, dev); return -EBUSY; } retval = request_irq(LUBBOCK_USB_IRQ, @@ -2616,7 +2607,7 @@ lubbock_fail0: if (retval != 0) { printk(KERN_ERR "%s: can't get irq %i, err %d\n", driver_name, vbus_irq, retval); - free_irq(IRQ_USB, dev); + free_irq(irq, dev); return -EBUSY; } } @@ -2641,7 +2632,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) remove_proc_files(); if (dev->got_irq) { - free_irq(IRQ_USB, dev); + free_irq(platform_get_irq(pdev, 0), dev); dev->got_irq = 0; } #ifdef CONFIG_ARCH_LUBBOCK @@ -2668,7 +2659,7 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev) * * For now, we punt and forcibly disconnect from the USB host when PXA * enters any suspend state. While we're disconnected, we always disable - * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. + * the 48MHz USB clock ... allowing PXA sleep and/or 33 MHz idle states. * Boards without software pullup control shouldn't use those states. * VBUS IRQs should probably be ignored so that the PXA device just acts * "dead" to USB hosts until system resume. @@ -2701,7 +2692,6 @@ static int pxa2xx_udc_resume(struct platform_device *dev) /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { - .probe = pxa2xx_udc_probe, .shutdown = pxa2xx_udc_shutdown, .remove = __exit_p(pxa2xx_udc_remove), .suspend = pxa2xx_udc_suspend, @@ -2715,7 +2705,7 @@ static struct platform_driver udc_driver = { static int __init udc_init(void) { printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); - return platform_driver_register(&udc_driver); + return platform_driver_probe(&udc_driver, pxa2xx_udc_probe); } module_init(udc_init); diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h index 4c3c7259f019..397b149f3ca7 100644 --- a/drivers/usb/gadget/rndis.h +++ b/drivers/usb/gadget/rndis.h @@ -195,7 +195,7 @@ struct rndis_packet_msg_type __le32 PerPacketInfoLength; __le32 VcHandle; __le32 Reserved; -}; +} __attribute__ ((packed)); struct rndis_config_parameter { diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a2e58c86849f..2ff396bd180f 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -15,4 +15,3 @@ obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o -obj-$(CONFIG_ETRAX_ARCH_V10) += hc_crisv10.o diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h index caac0d1967d0..f28736a917e4 100644 --- a/drivers/usb/host/ehci-fsl.h +++ b/drivers/usb/host/ehci-fsl.h @@ -31,7 +31,7 @@ #define FSL_SOC_USB_SNOOP1 0x400 /* NOTE: big-endian */ #define FSL_SOC_USB_SNOOP2 0x404 /* NOTE: big-endian */ #define FSL_SOC_USB_AGECNTTHRSH 0x408 /* NOTE: big-endian */ -#define FSL_SOC_USB_SICTRL 0x40c /* NOTE: big-endian */ -#define FSL_SOC_USB_PRICTRL 0x410 /* NOTE: big-endian */ +#define FSL_SOC_USB_PRICTRL 0x40c /* NOTE: big-endian */ +#define FSL_SOC_USB_SICTRL 0x410 /* NOTE: big-endian */ #define FSL_SOC_USB_CTRL 0x500 /* NOTE: big-endian */ #endif /* _EHCI_FSL_H */ diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 1813b7cac294..f4d301bc83b9 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -136,6 +136,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) /* restore CMD_RUN, framelist size, and irq threshold */ ehci_writel(ehci, ehci->command, &ehci->regs->command); + /* Some controller/firmware combinations need a delay during which + * they set up the port statuses. See Bugzilla #8190. */ + mdelay(8); + /* manually resume the ports we suspended during bus_suspend() */ i = HCS_N_PORTS (ehci->hcs_params); while (i--) { diff --git a/drivers/usb/host/hc_crisv10.c b/drivers/usb/host/hc_crisv10.c deleted file mode 100644 index 32f7caf24747..000000000000 --- a/drivers/usb/host/hc_crisv10.c +++ /dev/null @@ -1,4550 +0,0 @@ -/* - * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD) - * - * Copyright (c) 2002, 2003 Axis Communications AB. - */ - -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/unistd.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/spinlock.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/dma.h> -#include <asm/system.h> -#include <asm/arch/svinto.h> - -#include <linux/usb.h> -/* Ugly include because we don't live with the other host drivers. */ -#include <../drivers/usb/core/hcd.h> -#include <../drivers/usb/core/usb.h> - -#include "hc_crisv10.h" - -#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR -#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR -#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR - -static const char *usb_hcd_version = "$Revision: 1.2 $"; - -#undef KERN_DEBUG -#define KERN_DEBUG "" - - -#undef USB_DEBUG_RH -#undef USB_DEBUG_EPID -#undef USB_DEBUG_SB -#undef USB_DEBUG_DESC -#undef USB_DEBUG_URB -#undef USB_DEBUG_TRACE -#undef USB_DEBUG_BULK -#undef USB_DEBUG_CTRL -#undef USB_DEBUG_INTR -#undef USB_DEBUG_ISOC - -#ifdef USB_DEBUG_RH -#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg) -#else -#define dbg_rh(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_EPID -#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg) -#else -#define dbg_epid(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_SB -#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg) -#else -#define dbg_sb(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_CTRL -#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg) -#else -#define dbg_ctrl(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_BULK -#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg) -#else -#define dbg_bulk(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_INTR -#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg) -#else -#define dbg_intr(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_ISOC -#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg) -#else -#define dbg_isoc(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_TRACE -#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) -#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) -#else -#define DBFENTER do {} while (0) -#define DBFEXIT do {} while (0) -#endif - -#define usb_pipeslow(pipe) (((pipe) >> 26) & 1) - -/*------------------------------------------------------------------- - Virtual Root Hub - -------------------------------------------------------------------*/ - -static __u8 root_hub_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x00, /* __le16 bcdUSB; v1.0 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __le16 idVendor; */ - 0x00, - 0x00, /* __le16 idProduct; */ - 0x00, - 0x00, /* __le16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x02, /* __u8 iProduct; */ - 0x01, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 root_hub_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __le16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -static __u8 root_hub_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x02, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0); -static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0); - -/* We want the start timer to expire before the eot timer, because the former might start - traffic, thus making it unnecessary for the latter to time out. */ -#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */ -#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */ - -#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break -#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ -{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} - -#define SLAB_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) -#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) - -/* Most helpful debugging aid */ -#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) - -/* Alternative assert define which stops after a failed assert. */ -/* -#define assert(expr) \ -{ \ - if (!(expr)) { \ - err("assert failed at line %d",__LINE__); \ - while (1); \ - } \ -} -*/ - - -/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically? - To adjust it dynamically we would have to get an interrupt when we reach the end - of the rx descriptor list, or when we get close to the end, and then allocate more - descriptors. */ - -#define NBR_OF_RX_DESC 512 -#define RX_DESC_BUF_SIZE 1024 -#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) - -/* The number of epids is, among other things, used for pre-allocating - ctrl, bulk and isoc EP descriptors (one for each epid). - Assumed to be > 1 when initiating the DMA lists. */ -#define NBR_OF_EPIDS 32 - -/* Support interrupt traffic intervals up to 128 ms. */ -#define MAX_INTR_INTERVAL 128 - -/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table - must be "invalid". By this we mean that we shouldn't care about epid attentions - for this epid, or at least handle them differently from epid attentions for "valid" - epids. This define determines which one to use (don't change it). */ -#define INVALID_EPID 31 -/* A special epid for the bulk dummys. */ -#define DUMMY_EPID 30 - -/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */ -static __u32 epid_usage_bitmask; - -/* A bitfield to keep information on in/out traffic is needed to uniquely identify - an endpoint on a device, since the most significant bit which indicates traffic - direction is lacking in the ep_id field (ETRAX epids can handle both in and - out traffic on endpoints that are otherwise identical). The USB framework, however, - relies on them to be handled separately. For example, bulk IN and OUT urbs cannot - be queued in the same list, since they would block each other. */ -static __u32 epid_out_traffic; - -/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. - Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */ -static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); -static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); - -/* Pointers into RxDescList. */ -static volatile USB_IN_Desc_t *myNextRxDesc; -static volatile USB_IN_Desc_t *myLastRxDesc; -static volatile USB_IN_Desc_t *myPrevRxDesc; - -/* EP descriptors must be 32-bit aligned. */ -static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set, - causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which - gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the - EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors - in each frame. */ -static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); - -static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4))); - -static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); -static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4))); - -/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting - this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0 - results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point - it to this buffer. */ -static int zout_buffer[4] __attribute__ ((aligned (4))); - -/* Cache for allocating new EP and SB descriptors. */ -static struct kmem_cache *usb_desc_cache; - -/* Cache for the registers allocated in the top half. */ -static struct kmem_cache *top_half_reg_cache; - -/* Cache for the data allocated in the isoc descr top half. */ -static struct kmem_cache *isoc_compl_cache; - -static struct usb_bus *etrax_usb_bus; - -/* This is a circular (double-linked) list of the active urbs for each epid. - The head is never removed, and new urbs are linked onto the list as - urb_entry_t elements. Don't reference urb_list directly; use the wrapper - functions instead. Note that working with these lists might require spinlock - protection. */ -static struct list_head urb_list[NBR_OF_EPIDS]; - -/* Read about the need and usage of this lock in submit_ctrl_urb. */ -static spinlock_t urb_list_lock; - -/* Used when unlinking asynchronously. */ -static struct list_head urb_unlink_list; - -/* for returning string descriptors in UTF-16LE */ -static int ascii2utf (char *ascii, __u8 *utf, int utfmax) -{ - int retval; - - for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *ascii++ & 0x7f; - *utf++ = 0; - } - return retval; -} - -static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) -{ - char buf [30]; - - // assert (len > (2 * (sizeof (buf) + 1))); - // assert (strlen (type) <= 8); - - // language ids - if (id == 0) { - *data++ = 4; *data++ = 3; /* 4 bytes data */ - *data++ = 0; *data++ = 0; /* some language id */ - return 4; - - // serial number - } else if (id == 1) { - sprintf (buf, "%x", serial); - - // product description - } else if (id == 2) { - sprintf (buf, "USB %s Root Hub", type); - - // id 3 == vendor description - - // unsupported IDs --> "stall" - } else - return 0; - - data [0] = 2 + ascii2utf (buf, data + 2, len - 2); - data [1] = 3; - return data [0]; -} - -/* Wrappers around the list functions (include/linux/list.h). */ - -static inline int urb_list_empty(int epid) -{ - return list_empty(&urb_list[epid]); -} - -/* Returns first urb for this epid, or NULL if list is empty. */ -static inline struct urb *urb_list_first(int epid) -{ - struct urb *first_urb = 0; - - if (!urb_list_empty(epid)) { - /* Get the first urb (i.e. head->next). */ - urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); - first_urb = urb_entry->urb; - } - return first_urb; -} - -/* Adds an urb_entry last in the list for this epid. */ -static inline void urb_list_add(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG); - assert(urb_entry); - - urb_entry->urb = urb; - list_add_tail(&urb_entry->list, &urb_list[epid]); -} - -/* Search through the list for an element that contains this urb. (The list - is expected to be short and the one we are about to delete will often be - the first in the list.) */ -static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) -{ - struct list_head *entry; - struct list_head *tmp; - urb_entry_t *urb_entry; - - list_for_each_safe(entry, tmp, &urb_list[epid]) { - urb_entry = list_entry(entry, urb_entry_t, list); - assert(urb_entry); - assert(urb_entry->urb); - - if (urb_entry->urb == urb) { - return urb_entry; - } - } - return 0; -} - -/* Delete an urb from the list. */ -static inline void urb_list_del(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - assert(urb_entry); - - /* Delete entry and free. */ - list_del(&urb_entry->list); - kfree(urb_entry); -} - -/* Move an urb to the end of the list. */ -static inline void urb_list_move_last(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - assert(urb_entry); - - list_move_tail(&urb_entry->list, &urb_list[epid]); -} - -/* Get the next urb in the list. */ -static inline struct urb *urb_list_next(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - - assert(urb_entry); - - if (urb_entry->list.next != &urb_list[epid]) { - struct list_head *elem = urb_entry->list.next; - urb_entry = list_entry(elem, urb_entry_t, list); - return urb_entry->urb; - } else { - return NULL; - } -} - - - -/* For debug purposes only. */ -static inline void urb_list_dump(int epid) -{ - struct list_head *entry; - struct list_head *tmp; - urb_entry_t *urb_entry; - int i = 0; - - info("Dumping urb list for epid %d", epid); - - list_for_each_safe(entry, tmp, &urb_list[epid]) { - urb_entry = list_entry(entry, urb_entry_t, list); - info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb); - } -} - -static void init_rx_buffers(void); -static int etrax_rh_unlink_urb(struct urb *urb); -static void etrax_rh_send_irq(struct urb *urb); -static void etrax_rh_init_int_timer(struct urb *urb); -static void etrax_rh_int_timer_do(unsigned long ptr); - -static int etrax_usb_setup_epid(struct urb *urb); -static int etrax_usb_lookup_epid(struct urb *urb); -static int etrax_usb_allocate_epid(void); -static void etrax_usb_free_epid(int epid); - -static int etrax_remove_from_sb_list(struct urb *urb); - -static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, - unsigned mem_flags, dma_addr_t *dma); -static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); - -static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid); - -static int etrax_usb_submit_bulk_urb(struct urb *urb); -static int etrax_usb_submit_ctrl_urb(struct urb *urb); -static int etrax_usb_submit_intr_urb(struct urb *urb); -static int etrax_usb_submit_isoc_urb(struct urb *urb); - -static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); -static int etrax_usb_unlink_urb(struct urb *urb, int status); -static int etrax_usb_get_frame_number(struct usb_device *usb_dev); - -static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc); -static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc); -static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc); -static void etrax_usb_hc_interrupt_bottom_half(void *data); - -static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data); - - -/* The following is a list of interrupt handlers for the host controller interrupts we use. - They are called from etrax_usb_hc_interrupt_bottom_half. */ -static void etrax_usb_hc_isoc_eof_interrupt(void); -static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced); -static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg); -static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg); -static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg); - -static int etrax_rh_submit_urb (struct urb *urb); - -/* Forward declaration needed because they are used in the rx interrupt routine. */ -static void etrax_usb_complete_urb(struct urb *urb, int status); -static void etrax_usb_complete_bulk_urb(struct urb *urb, int status); -static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status); -static void etrax_usb_complete_intr_urb(struct urb *urb, int status); -static void etrax_usb_complete_isoc_urb(struct urb *urb, int status); - -static int etrax_usb_hc_init(void); -static void etrax_usb_hc_cleanup(void); - -static struct usb_operations etrax_usb_device_operations = -{ - .get_frame_number = etrax_usb_get_frame_number, - .submit_urb = etrax_usb_submit_urb, - .unlink_urb = etrax_usb_unlink_urb, - .buffer_alloc = etrax_usb_buffer_alloc, - .buffer_free = etrax_usb_buffer_free -}; - -/* Note that these functions are always available in their "__" variants, for use in - error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/ - USB_DEBUG_URB macros. */ -static void __dump_urb(struct urb* purb) -{ - printk("\nurb :0x%08lx\n", (unsigned long)purb); - printk("dev :0x%08lx\n", (unsigned long)purb->dev); - printk("pipe :0x%08x\n", purb->pipe); - printk("status :%d\n", purb->status); - printk("transfer_flags :0x%08x\n", purb->transfer_flags); - printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); - printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); - printk("actual_length :%d\n", purb->actual_length); - printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); - printk("start_frame :%d\n", purb->start_frame); - printk("number_of_packets :%d\n", purb->number_of_packets); - printk("interval :%d\n", purb->interval); - printk("error_count :%d\n", purb->error_count); - printk("context :0x%08lx\n", (unsigned long)purb->context); - printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); -} - -static void __dump_in_desc(volatile USB_IN_Desc_t *in) -{ - printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); - printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); - printk(" command : 0x%04x\n", in->command); - printk(" next : 0x%08lx\n", in->next); - printk(" buf : 0x%08lx\n", in->buf); - printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); - printk(" status : 0x%04x\n\n", in->status); -} - -static void __dump_sb_desc(volatile USB_SB_Desc_t *sb) -{ - char tt = (sb->command & 0x30) >> 4; - char *tt_string; - - switch (tt) { - case 0: - tt_string = "zout"; - break; - case 1: - tt_string = "in"; - break; - case 2: - tt_string = "out"; - break; - case 3: - tt_string = "setup"; - break; - default: - tt_string = "unknown (weird)"; - } - - printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb); - printk(" command : 0x%04x\n", sb->command); - printk(" rem : %d\n", (sb->command & 0x3f00) >> 8); - printk(" full : %d\n", (sb->command & 0x40) >> 6); - printk(" tt : %d (%s)\n", tt, tt_string); - printk(" intr : %d\n", (sb->command & 0x8) >> 3); - printk(" eot : %d\n", (sb->command & 0x2) >> 1); - printk(" eol : %d\n", sb->command & 0x1); - printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len); - printk(" next : 0x%08lx\n", sb->next); - printk(" buf : 0x%08lx\n\n", sb->buf); -} - - -static void __dump_ep_desc(volatile USB_EP_Desc_t *ep) -{ - printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep); - printk(" command : 0x%04x\n", ep->command); - printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8); - printk(" enable : %d\n", (ep->command & 0x10) >> 4); - printk(" intr : %d\n", (ep->command & 0x8) >> 3); - printk(" eof : %d\n", (ep->command & 0x2) >> 1); - printk(" eol : %d\n", ep->command & 0x1); - printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len); - printk(" next : 0x%08lx\n", ep->next); - printk(" sub : 0x%08lx\n\n", ep->sub); -} - -static inline void __dump_ep_list(int pipe_type) -{ - volatile USB_EP_Desc_t *ep; - volatile USB_EP_Desc_t *first_ep; - volatile USB_SB_Desc_t *sb; - - switch (pipe_type) - { - case PIPE_BULK: - first_ep = &TxBulkEPList[0]; - break; - case PIPE_CONTROL: - first_ep = &TxCtrlEPList[0]; - break; - case PIPE_INTERRUPT: - first_ep = &TxIntrEPList[0]; - break; - case PIPE_ISOCHRONOUS: - first_ep = &TxIsocEPList[0]; - break; - default: - warn("Cannot dump unknown traffic type"); - return; - } - ep = first_ep; - - printk("\n\nDumping EP list...\n\n"); - - do { - __dump_ep_desc(ep); - /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ - sb = ep->sub ? phys_to_virt(ep->sub) : 0; - while (sb) { - __dump_sb_desc(sb); - sb = sb->next ? phys_to_virt(sb->next) : 0; - } - ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next)); - - } while (ep != first_ep); -} - -static inline void __dump_ept_data(int epid) -{ - unsigned long flags; - __u32 r_usb_ept_data; - - if (epid < 0 || epid > 31) { - printk("Cannot dump ept data for invalid epid %d\n", epid); - return; - } - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); - if (r_usb_ept_data == 0) { - /* No need for more detailed printing. */ - return; - } - printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); - printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); - printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); - printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); - printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); - printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); - printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); - printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); - printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); - printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); - printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); - printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -} - -static inline void __dump_ept_data_list(void) -{ - int i; - - printk("Dumping the whole R_USB_EPT_DATA list\n"); - - for (i = 0; i < 32; i++) { - __dump_ept_data(i); - } -} -#ifdef USB_DEBUG_DESC -#define dump_in_desc(...) __dump_in_desc(...) -#define dump_sb_desc(...) __dump_sb_desc(...) -#define dump_ep_desc(...) __dump_ep_desc(...) -#else -#define dump_in_desc(...) do {} while (0) -#define dump_sb_desc(...) do {} while (0) -#define dump_ep_desc(...) do {} while (0) -#endif - -#ifdef USB_DEBUG_URB -#define dump_urb(x) __dump_urb(x) -#else -#define dump_urb(x) do {} while (0) -#endif - -static void init_rx_buffers(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { - RxDescList[i].sw_len = RX_DESC_BUF_SIZE; - RxDescList[i].command = 0; - RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); - RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); - RxDescList[i].hw_len = 0; - RxDescList[i].status = 0; - - /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc - for the relevant fields.) */ - prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); - - } - - RxDescList[i].sw_len = RX_DESC_BUF_SIZE; - RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); - RxDescList[i].next = virt_to_phys(&RxDescList[0]); - RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); - RxDescList[i].hw_len = 0; - RxDescList[i].status = 0; - - myNextRxDesc = &RxDescList[0]; - myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - - *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); - *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); - - DBFEXIT; -} - -static void init_tx_bulk_ep(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxBulkEPList[i]); - TxBulkEPList[i].hw_len = 0; - TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxBulkEPList[i].sub = 0; - TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]); - - /* Initiate two EPs, disabled and with the eol flag set. No need for any - preserved epid. */ - - /* The first one has the intr flag set so we get an interrupt when the DMA - channel is about to become disabled. */ - CHECK_ALIGN(&TxBulkDummyEPList[i][0]); - TxBulkDummyEPList[i][0].hw_len = 0; - TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | - IO_STATE(USB_EP_command, eol, yes) | - IO_STATE(USB_EP_command, intr, yes)); - TxBulkDummyEPList[i][0].sub = 0; - TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); - - /* The second one. */ - CHECK_ALIGN(&TxBulkDummyEPList[i][1]); - TxBulkDummyEPList[i][1].hw_len = 0; - TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | - IO_STATE(USB_EP_command, eol, yes)); - TxBulkDummyEPList[i][1].sub = 0; - /* The last dummy's next pointer is the same as the current EP's next pointer. */ - TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); - } - - /* Configure the last one. */ - CHECK_ALIGN(&TxBulkEPList[i]); - TxBulkEPList[i].hw_len = 0; - TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, i)); - TxBulkEPList[i].sub = 0; - TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]); - - /* No need configuring dummy EPs for the last one as it will never be used for - bulk traffic (i == INVALD_EPID at this point). */ - - /* Set up to start on the last EP so we will enable it when inserting traffic - for the first time (imitating the situation where the DMA has stopped - because there was no more traffic). */ - *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); - /* No point in starting the bulk channel yet. - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ - DBFEXIT; -} - -static void init_tx_ctrl_ep(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxCtrlEPList[i]); - TxCtrlEPList[i].hw_len = 0; - TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxCtrlEPList[i].sub = 0; - TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]); - } - - CHECK_ALIGN(&TxCtrlEPList[i]); - TxCtrlEPList[i].hw_len = 0; - TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, i)); - - TxCtrlEPList[i].sub = 0; - TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]); - - *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]); - *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); - - DBFEXIT; -} - - -static void init_tx_intr_ep(void) -{ - int i; - - DBFENTER; - - /* Read comment at zout_buffer declaration for an explanation to this. */ - TxIntrSB_zout.sw_len = 1; - TxIntrSB_zout.next = 0; - TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); - TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { - CHECK_ALIGN(&TxIntrEPList[i]); - TxIntrEPList[i].hw_len = 0; - TxIntrEPList[i].command = - (IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, enable, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); - TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); - } - - CHECK_ALIGN(&TxIntrEPList[i]); - TxIntrEPList[i].hw_len = 0; - TxIntrEPList[i].command = - (IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, eol, yes) | - IO_STATE(USB_EP_command, enable, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); - TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); - - *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); - *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); - DBFEXIT; -} - -static void init_tx_isoc_ep(void) -{ - int i; - - DBFENTER; - - /* Read comment at zout_buffer declaration for an explanation to this. */ - TxIsocSB_zout.sw_len = 1; - TxIsocSB_zout.next = 0; - TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); - TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - /* The last isochronous EP descriptor is a dummy. */ - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxIsocEPList[i]); - TxIsocEPList[i].hw_len = 0; - TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxIsocEPList[i].sub = 0; - TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); - } - - CHECK_ALIGN(&TxIsocEPList[i]); - TxIsocEPList[i].hw_len = 0; - - /* Must enable the last EP descr to get eof interrupt. */ - TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | - IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); - TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); - - *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); - *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_unlink_intr_urb(struct urb *urb) -{ - volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */ - volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */ - volatile USB_EP_Desc_t *next_ep; /* The EP after current. */ - volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */ - - int epid; - - /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */ - - DBFENTER; - - epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid; - - first_ep = &TxIntrEPList[0]; - curr_ep = first_ep; - - - /* Note that this loop removes all EP descriptors with this epid. This assumes - that all EP descriptors belong to the one and only urb for this epid. */ - - do { - next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next); - - if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { - - dbg_intr("Found EP to unlink for epid %d", epid); - - /* This is the one we should unlink. */ - unlink_ep = next_ep; - - /* Actually unlink the EP from the DMA list. */ - curr_ep->next = unlink_ep->next; - - /* Wait until the DMA is no longer at this descriptor. */ - while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)); - - /* Now we are free to remove it and its SB descriptor. - Note that it is assumed here that there is only one sb in the - sb list for this ep. */ - kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub)); - kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep); - } - - curr_ep = phys_to_virt(curr_ep->next); - - } while (curr_ep != first_ep); - urb->hcpriv = NULL; -} - -void etrax_usb_do_intr_recover(int epid) -{ - USB_EP_Desc_t *first_ep, *tmp_ep; - - DBFENTER; - - first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP); - tmp_ep = first_ep; - - /* What this does is simply to walk the list of interrupt - ep descriptors and enable those that are disabled. */ - - do { - if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid && - !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) { - tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes); - } - - tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); - - } while (tmp_ep != first_ep); - - - DBFEXIT; -} - -static int etrax_rh_unlink_urb (struct urb *urb) -{ - etrax_hc_t *hc; - - DBFENTER; - - hc = urb->dev->bus->hcpriv; - - if (hc->rh.urb == urb) { - hc->rh.send = 0; - del_timer(&hc->rh.rh_int_timer); - } - - DBFEXIT; - return 0; -} - -static void etrax_rh_send_irq(struct urb *urb) -{ - __u16 data = 0; - etrax_hc_t *hc = urb->dev->bus->hcpriv; - DBFENTER; - -/* - dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER); - dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING); -*/ - - data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0; - data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0; - - *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data); - /* FIXME: Why is actual_length set to 1 when data is 2 bytes? - Since only 1 byte is used, why not declare data as __u8? */ - urb->actual_length = 1; - urb->status = 0; - - if (hc->rh.send && urb->complete) { - dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1); - dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2); - - urb->complete(urb, NULL); - } - - DBFEXIT; -} - -static void etrax_rh_init_int_timer(struct urb *urb) -{ - etrax_hc_t *hc; - - DBFENTER; - - hc = urb->dev->bus->hcpriv; - hc->rh.interval = urb->interval; - init_timer(&hc->rh.rh_int_timer); - hc->rh.rh_int_timer.function = etrax_rh_int_timer_do; - hc->rh.rh_int_timer.data = (unsigned long)urb; - /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped - to 0, and the rest to the nearest lower 10 ms. */ - hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000); - add_timer(&hc->rh.rh_int_timer); - - DBFEXIT; -} - -static void etrax_rh_int_timer_do(unsigned long ptr) -{ - struct urb *urb; - etrax_hc_t *hc; - - DBFENTER; - - urb = (struct urb*)ptr; - hc = urb->dev->bus->hcpriv; - - if (hc->rh.send) { - etrax_rh_send_irq(urb); - } - - DBFEXIT; -} - -static int etrax_usb_setup_epid(struct urb *urb) -{ - int epid; - char devnum, endpoint, out_traffic, slow; - int maxlen; - unsigned long flags; - - DBFENTER; - - epid = etrax_usb_lookup_epid(urb); - if ((epid != -1)){ - /* An epid that fits this urb has been found. */ - DBFEXIT; - return epid; - } - - /* We must find and initiate a new epid for this urb. */ - epid = etrax_usb_allocate_epid(); - - if (epid == -1) { - /* Failed to allocate a new epid. */ - DBFEXIT; - return epid; - } - - /* We now have a new epid to use. Initiate it. */ - set_bit(epid, (void *)&epid_usage_bitmask); - - devnum = usb_pipedevice(urb->pipe); - endpoint = usb_pipeendpoint(urb->pipe); - slow = usb_pipeslow(urb->pipe); - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ - out_traffic = 1; - } else { - out_traffic = usb_pipeout(urb->pipe); - } - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | - /* FIXME: Change any to the actual port? */ - IO_STATE(R_USB_EPT_DATA_ISO, port, any) | - IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | - IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | - IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); - } else { - *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) | - IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | - /* FIXME: Change any to the actual port? */ - IO_STATE(R_USB_EPT_DATA, port, any) | - IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | - IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | - IO_FIELD(R_USB_EPT_DATA, dev, devnum); - } - - restore_flags(flags); - - if (out_traffic) { - set_bit(epid, (void *)&epid_out_traffic); - } else { - clear_bit(epid, (void *)&epid_out_traffic); - } - - dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)", - epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN"); - - DBFEXIT; - return epid; -} - -static void etrax_usb_free_epid(int epid) -{ - unsigned long flags; - - DBFENTER; - - if (!test_bit(epid, (void *)&epid_usage_bitmask)) { - warn("Trying to free unused epid %d", epid); - DBFEXIT; - return; - } - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)); - /* This will, among other things, set the valid field to 0. */ - *R_USB_EPT_DATA = 0; - restore_flags(flags); - - clear_bit(epid, (void *)&epid_usage_bitmask); - - - dbg_epid("Freed epid %d", epid); - - DBFEXIT; -} - -static int etrax_usb_lookup_epid(struct urb *urb) -{ - int i; - __u32 data; - char devnum, endpoint, slow, out_traffic; - int maxlen; - unsigned long flags; - - DBFENTER; - - devnum = usb_pipedevice(urb->pipe); - endpoint = usb_pipeendpoint(urb->pipe); - slow = usb_pipeslow(urb->pipe); - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ - out_traffic = 1; - } else { - out_traffic = usb_pipeout(urb->pipe); - } - - /* Step through att epids. */ - for (i = 0; i < NBR_OF_EPIDS; i++) { - if (test_bit(i, (void *)&epid_usage_bitmask) && - test_bit(i, (void *)&epid_out_traffic) == out_traffic) { - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i); - nop(); - - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - data = *R_USB_EPT_DATA_ISO; - restore_flags(flags); - - if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) { - dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", - i, devnum, endpoint, out_traffic ? "OUT" : "IN"); - DBFEXIT; - return i; - } - } else { - data = *R_USB_EPT_DATA; - restore_flags(flags); - - if ((IO_MASK(R_USB_EPT_DATA, valid) & data) && - (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) && - (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) && - (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) && - (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) { - dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", - i, devnum, endpoint, out_traffic ? "OUT" : "IN"); - DBFEXIT; - return i; - } - } - } - } - - DBFEXIT; - return -1; -} - -static int etrax_usb_allocate_epid(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < NBR_OF_EPIDS; i++) { - if (!test_bit(i, (void *)&epid_usage_bitmask)) { - dbg_epid("Found free epid %d", i); - DBFEXIT; - return i; - } - } - - dbg_epid("Found no free epids"); - DBFEXIT; - return -1; -} - -static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) -{ - etrax_hc_t *hc; - int ret = -EINVAL; - - DBFENTER; - - if (!urb->dev || !urb->dev->bus) { - return -ENODEV; - } - if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) { - info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe); - return -EMSGSIZE; - } - - if (urb->timeout) { - /* FIXME. */ - warn("urb->timeout specified, ignoring."); - } - - hc = (etrax_hc_t*)urb->dev->bus->hcpriv; - - if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { - /* This request is for the Virtual Root Hub. */ - ret = etrax_rh_submit_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - ret = etrax_usb_submit_bulk_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - ret = etrax_usb_submit_ctrl_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - int bustime; - - if (urb->bandwidth == 0) { - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) { - ret = bustime; - } else { - ret = etrax_usb_submit_intr_urb(urb); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 0); - } - } else { - /* Bandwidth already set. */ - ret = etrax_usb_submit_intr_urb(urb); - } - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - int bustime; - - if (urb->bandwidth == 0) { - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) { - ret = bustime; - } else { - ret = etrax_usb_submit_isoc_urb(urb); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 0); - } - } else { - /* Bandwidth already set. */ - ret = etrax_usb_submit_isoc_urb(urb); - } - } - - DBFEXIT; - - if (ret != 0) - printk("Submit URB error %d\n", ret); - - return ret; -} - -static int etrax_usb_unlink_urb(struct urb *urb, int status) -{ - etrax_hc_t *hc; - etrax_urb_priv_t *urb_priv; - int epid; - unsigned int flags; - - DBFENTER; - - if (!urb) { - return -EINVAL; - } - - /* Disable interrupts here since a descriptor interrupt for the isoc epid - will modify the sb list. This could possibly be done more granular, but - unlink_urb should not be used frequently anyway. - */ - - save_flags(flags); - cli(); - - if (!urb->dev || !urb->dev->bus) { - restore_flags(flags); - return -ENODEV; - } - if (!urb->hcpriv) { - /* This happens if a device driver calls unlink on an urb that - was never submitted (lazy driver) or if the urb was completed - while unlink was being called. */ - restore_flags(flags); - return 0; - } - if (urb->transfer_flags & URB_ASYNC_UNLINK) { - /* FIXME. */ - /* If URB_ASYNC_UNLINK is set: - unlink - move to a separate urb list - call complete at next sof with ECONNRESET - - If not: - wait 1 ms - unlink - call complete with ENOENT - */ - warn("URB_ASYNC_UNLINK set, ignoring."); - } - - /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking, - but that doesn't work for interrupt and isochronous traffic since they are completed - repeatedly, and urb->status is set then. That may in itself be a bug though. */ - - hc = urb->dev->bus->hcpriv; - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - epid = urb_priv->epid; - - /* Set the urb status (synchronous unlink). */ - urb->status = -ENOENT; - urb_priv->urb_state = UNLINK; - - if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { - int ret; - ret = etrax_rh_unlink_urb(urb); - DBFEXIT; - restore_flags(flags); - return ret; - - } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb); - - if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid])); - } - /* Kicking dummy list out of the party. */ - TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb); - - if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid])); - } - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - - dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb); - - /* Separate function because it's a tad more complicated. */ - etrax_usb_unlink_intr_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb); - - if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); - } - } - - /* Note that we need to remove the urb from the urb list *before* removing its SB - descriptors. (This means that the isoc eof handler might get a null urb when we - are unlinking the last urb.) */ - - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - urb_list_del(urb, epid); - TxBulkEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - urb_list_del(urb, epid); - TxCtrlEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - - urb_list_del(urb, epid); - /* Sanity check (should never happen). */ - assert(urb_list_empty(epid)); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - if (usb_pipeout(urb->pipe)) { - - USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb; - - if (__urb_list_entry(urb, epid)) { - - urb_list_del(urb, epid); - iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; - prev_sb = 0; - while (iter_sb && (iter_sb != urb_priv->first_sb)) { - prev_sb = iter_sb; - iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } - - if (iter_sb == 0) { - /* Unlink of the URB currently being transmitted. */ - prev_sb = 0; - iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; - } - - while (iter_sb && (iter_sb != urb_priv->last_sb)) { - iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } - if (iter_sb) { - next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } else { - /* This should only happen if the DMA has completed - processing the SB list for this EP while interrupts - are disabled. */ - dbg_isoc("Isoc urb not found, already sent?"); - next_sb = 0; - } - if (prev_sb) { - prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; - } else { - TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; - } - - etrax_remove_from_sb_list(urb); - if (urb_list_empty(epid)) { - TxIsocEPList[epid].sub = 0; - dbg_isoc("Last isoc out urb epid %d", epid); - } else if (next_sb || prev_sb) { - dbg_isoc("Re-enable isoc out epid %d", epid); - - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - } else { - TxIsocEPList[epid].sub = 0; - dbg_isoc("URB list non-empty and no SB list, EP disabled"); - } - } else { - dbg_isoc("Urb 0x%p not found, completed already?", urb); - } - } else { - - urb_list_del(urb, epid); - - /* For in traffic there is only one SB descriptor for each EP even - though there may be several urbs (all urbs point at the same SB). */ - if (urb_list_empty(epid)) { - /* No more urbs, remove the SB. */ - TxIsocEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - } else { - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - } - } - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 1); - } - /* Free the epid if urb list is empty. */ - if (urb_list_empty(epid)) { - etrax_usb_free_epid(epid); - } - restore_flags(flags); - - /* Must be done before calling completion handler. */ - kfree(urb_priv); - urb->hcpriv = 0; - - if (urb->complete) { - urb->complete(urb, NULL); - } - - DBFEXIT; - return 0; -} - -static int etrax_usb_get_frame_number(struct usb_device *usb_dev) -{ - DBFENTER; - DBFEXIT; - return (*R_USB_FM_NUMBER & 0x7ff); -} - -static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc) -{ - DBFENTER; - - /* This interrupt handler could be used when unlinking EP descriptors. */ - - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { - USB_EP_Desc_t *ep; - - //dbg_bulk("dma8_sub0_descr (BULK) intr."); - - /* It should be safe clearing the interrupt here, since we don't expect to get a new - one until we restart the bulk channel. */ - *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); - - /* Wait while the DMA is running (though we don't expect it to be). */ - while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)); - - /* Advance the DMA to the next EP descriptor. */ - ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); - - //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep); - - /* ep->next is already a physical address; no need for a virt_to_phys. */ - *R_DMA_CH8_SUB0_EP = ep->next; - - /* Start the DMA bulk channel again. */ - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { - struct urb *urb; - int epid; - etrax_urb_priv_t *urb_priv; - unsigned long int flags; - - dbg_ctrl("dma8_sub1_descr (CTRL) intr."); - *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); - - /* The complete callback gets called so we cli. */ - save_flags(flags); - cli(); - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - if ((TxCtrlEPList[epid].sub == 0) || - (epid == DUMMY_EPID) || - (epid == INVALID_EPID)) { - /* Nothing here to see. */ - continue; - } - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - - if (urb) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_CONTROL); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) { - assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - - etrax_usb_complete_urb(urb, 0); - } - } - } - restore_flags(flags); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { - dbg_intr("dma8_sub2_descr (INTR) intr."); - *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { - struct urb *urb; - int epid; - int epid_done; - etrax_urb_priv_t *urb_priv; - USB_SB_Desc_t *sb_desc; - - usb_isoc_complete_data_t *comp_data = NULL; - - /* One or more isoc out transfers are done. */ - dbg_isoc("dma8_sub3_descr (ISOC) intr."); - - /* For each isoc out EP search for the first sb_desc with the intr flag - set. This descriptor must be the last packet from an URB. Then - traverse the URB list for the EP until the URB with urb_priv->last_sb - matching the intr-marked sb_desc is found. All URBs before this have - been sent. - */ - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - /* Skip past epids with no SB lists, epids used for in traffic, - and special (dummy, invalid) epids. */ - if ((TxIsocEPList[epid].sub == 0) || - (test_bit(epid, (void *)&epid_out_traffic) == 0) || - (epid == DUMMY_EPID) || - (epid == INVALID_EPID)) { - /* Nothing here to see. */ - continue; - } - sb_desc = phys_to_virt(TxIsocEPList[epid].sub); - - /* Find the last descriptor of the currently active URB for this ep. - This is the first descriptor in the sub list marked for a descriptor - interrupt. */ - while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { - sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; - } - assert(sb_desc); - - dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p", - epid, - phys_to_virt(TxIsocEPList[epid].sub), - sb_desc); - - epid_done = 0; - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - assert(urb); - - while (urb && !epid_done) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); - - if (!usb_pipeout(urb->pipe)) { - /* descr interrupts are generated only for out pipes. */ - epid_done = 1; - continue; - } - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (sb_desc != urb_priv->last_sb) { - - /* This urb has been sent. */ - dbg_isoc("out URB 0x%p sent", urb); - - urb_priv->urb_state = TRANSFER_DONE; - - } else if ((sb_desc == urb_priv->last_sb) && - !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { - - assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes)); - assert(sb_desc->next == 0); - - dbg_isoc("out URB 0x%p last in list, epid disabled", urb); - TxIsocEPList[epid].sub = 0; - TxIsocEPList[epid].hw_len = 0; - urb_priv->urb_state = TRANSFER_DONE; - - epid_done = 1; - - } else { - epid_done = 1; - } - if (!epid_done) { - urb = urb_list_next(urb, epid); - } - } - - } - - *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); - - comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC); - assert(comp_data != NULL); - - INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data); - schedule_work(&comp_data->usb_bh); - } - - DBFEXIT; - return IRQ_HANDLED; -} - -static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data) -{ - usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data; - - struct urb *urb; - int epid; - int epid_done; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - dbg_isoc("dma8_sub3_descr (ISOC) bottom half."); - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - unsigned long flags; - - save_flags(flags); - cli(); - - epid_done = 0; - - /* The descriptor interrupt handler has marked all transmitted isoch. out - URBs with TRANSFER_DONE. Now we traverse all epids and for all that - have isoch. out traffic traverse its URB list and complete the - transmitted URB. - */ - - while (!epid_done) { - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - if (urb == 0) { - epid_done = 1; - continue; - } - - if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { - epid_done = 1; - continue; - } - - if (!usb_pipeout(urb->pipe)) { - /* descr interrupts are generated only for out pipes. */ - epid_done = 1; - continue; - } - - dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == TRANSFER_DONE) { - int i; - struct usb_iso_packet_descriptor *packet; - - /* This urb has been sent. */ - dbg_isoc("Completing isoc out URB 0x%p", urb); - - for (i = 0; i < urb->number_of_packets; i++) { - packet = &urb->iso_frame_desc[i]; - packet->status = 0; - packet->actual_length = packet->length; - } - - etrax_usb_complete_isoc_urb(urb, 0); - - if (urb_list_empty(epid)) { - etrax_usb_free_epid(epid); - epid_done = 1; - } - } else { - epid_done = 1; - } - } - restore_flags(flags); - - } - kmem_cache_free(isoc_compl_cache, comp_data); - - DBFEXIT; -} - - - -static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc) -{ - struct urb *urb; - etrax_urb_priv_t *urb_priv; - int epid = 0; - unsigned long flags; - - /* Isoc diagnostics. */ - static int curr_fm = 0; - static int prev_fm = 0; - - DBFENTER; - - /* Clear this interrupt. */ - *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); - - /* Note that this while loop assumes that all packets span only - one rx descriptor. */ - - /* The reason we cli here is that we call the driver's callback functions. */ - save_flags(flags); - cli(); - - while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { - - epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); - urb = urb_list_first(epid); - - //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb); - - if (!urb) { - err("No urb for epid %d in rx interrupt", epid); - __dump_ept_data(epid); - goto skip_out; - } - - /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since - ctrl pipes are not. */ - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { - __u32 r_usb_ept_data; - int no_error = 0; - - assert(test_bit(epid, (void *)&epid_usage_bitmask)); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - r_usb_ept_data = *R_USB_EPT_DATA_ISO; - - if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && - (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { - /* Not an error, just a failure to receive an expected iso - in packet in this frame. This is not documented - in the designers reference. - */ - no_error++; - } else { - warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data); - } - } else { - r_usb_ept_data = *R_USB_EPT_DATA; - warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data); - } - - if (!no_error){ - warn("error in rx desc->status, epid %d, first urb = 0x%lx", - epid, (unsigned long)urb); - __dump_in_desc(myNextRxDesc); - - warn("R_USB_STATUS = 0x%x", *R_USB_STATUS); - - /* Check that ept was disabled when error occurred. */ - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_CONTROL: - assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_INTERRUPT: - assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_ISOCHRONOUS: - assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - default: - warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p", - usb_pipetype(urb->pipe), - urb); - } - etrax_usb_complete_urb(urb, -EPROTO); - goto skip_out; - } - } - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if ((usb_pipetype(urb->pipe) == PIPE_BULK) || - (usb_pipetype(urb->pipe) == PIPE_CONTROL) || - (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { - /* We get nodata for empty data transactions, and the rx descriptor's - hw_len field is not valid in that case. No data to copy in other - words. */ - } else { - /* Make sure the data fits in the buffer. */ - assert(urb_priv->rx_offset + myNextRxDesc->hw_len - <= urb->transfer_buffer_length); - - memcpy(urb->transfer_buffer + urb_priv->rx_offset, - phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); - urb_priv->rx_offset += myNextRxDesc->hw_len; - } - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { - if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) && - ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) == - IO_STATE(USB_EP_command, enable, yes))) { - /* The EP is still enabled, so the OUT packet used to ack - the in data is probably not processed yet. If the EP - sub pointer has not moved beyond urb_priv->last_sb mark - it for a descriptor interrupt and complete the urb in - the descriptor interrupt handler. - */ - USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0; - - while ((sub != NULL) && (sub != urb_priv->last_sb)) { - sub = sub->next ? phys_to_virt(sub->next) : 0; - } - if (sub != NULL) { - /* The urb has not been fully processed. */ - urb_priv->urb_state = WAITING_FOR_DESCR_INTR; - } else { - warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub); - etrax_usb_complete_urb(urb, 0); - } - } else { - etrax_usb_complete_urb(urb, 0); - } - } - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - struct usb_iso_packet_descriptor *packet; - - if (urb_priv->urb_state == UNLINK) { - info("Ignoring rx data for urb being unlinked."); - goto skip_out; - } else if (urb_priv->urb_state == NOT_STARTED) { - info("What? Got rx data for urb that isn't started?"); - goto skip_out; - } - - packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; - packet->status = 0; - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { - /* We get nodata for empty data transactions, and the rx descriptor's - hw_len field is not valid in that case. We copy 0 bytes however to - stay in synch. */ - packet->actual_length = 0; - } else { - packet->actual_length = myNextRxDesc->hw_len; - /* Make sure the data fits in the buffer. */ - assert(packet->actual_length <= packet->length); - memcpy(urb->transfer_buffer + packet->offset, - phys_to_virt(myNextRxDesc->buf), packet->actual_length); - } - - /* Increment the packet counter. */ - urb_priv->isoc_packet_counter++; - - /* Note that we don't care about the eot field in the rx descriptor's status. - It will always be set for isoc traffic. */ - if (urb->number_of_packets == urb_priv->isoc_packet_counter) { - - /* Out-of-synch diagnostics. */ - curr_fm = (*R_USB_FM_NUMBER & 0x7ff); - if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) { - /* This test is wrong, if there is more than one isoc - in endpoint active it will always calculate wrong - since prev_fm is shared by all endpoints. - - FIXME Make this check per URB using urb->start_frame. - */ - dbg_isoc("Out of synch? Previous frame = %d, current frame = %d", - prev_fm, curr_fm); - - } - prev_fm = curr_fm; - - /* Complete the urb with status OK. */ - etrax_usb_complete_isoc_urb(urb, 0); - } - } - - skip_out: - - /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr - has the same layout as USB_IN_Desc for the relevant fields.) */ - prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc); - - myPrevRxDesc = myNextRxDesc; - myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol); - myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); - myLastRxDesc = myPrevRxDesc; - - myNextRxDesc->status = 0; - myNextRxDesc = phys_to_virt(myNextRxDesc->next); - } - - restore_flags(flags); - - DBFEXIT; - - return IRQ_HANDLED; -} - - -/* This function will unlink the SB descriptors associated with this urb. */ -static int etrax_remove_from_sb_list(struct urb *urb) -{ - USB_SB_Desc_t *next_sb, *first_sb, *last_sb; - etrax_urb_priv_t *urb_priv; - int i = 0; - - DBFENTER; - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor - doesn't really need to be disabled, it's just that we expect it to be. */ - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - } - - first_sb = urb_priv->first_sb; - last_sb = urb_priv->last_sb; - - assert(first_sb); - assert(last_sb); - - while (first_sb != last_sb) { - next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next); - kmem_cache_free(usb_desc_cache, first_sb); - first_sb = next_sb; - i++; - } - kmem_cache_free(usb_desc_cache, last_sb); - i++; - dbg_sb("%d SB descriptors freed", i); - /* Compare i with urb->number_of_packets for Isoc traffic. - Should be same when calling unlink_urb */ - - DBFEXIT; - - return i; -} - -static int etrax_usb_submit_bulk_urb(struct urb *urb) -{ - int epid; - int empty; - unsigned long flags; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - /* Epid allocation, empty check and list add must be protected. - Read about this in etrax_usb_submit_ctrl_urb. */ - - spin_lock_irqsave(&urb_list_lock, flags); - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - spin_unlock_irqrestore(&urb_list_lock, flags); - return -ENOMEM; - } - empty = urb_list_empty(epid); - urb_list_add(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d", - usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid); - - /* Mark the urb as being in progress. */ - urb->status = -EINPROGRESS; - - /* Setup the hcpriv data. */ - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - /* This sets rx_offset to 0. */ - urb_priv->urb_state = NOT_STARTED; - urb->hcpriv = urb_priv; - - if (empty) { - etrax_usb_add_to_bulk_sb_list(urb, epid); - } - - DBFEXIT; - - return 0; -} - -static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid) -{ - USB_SB_Desc_t *sb_desc; - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - unsigned long flags; - char maxlen; - - DBFENTER; - - dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb); - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - - sb_desc = kmem_cache_zalloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc != NULL); - - - if (usb_pipeout(urb->pipe)) { - - dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid); - - /* This is probably a sanity check of the bulk transaction length - not being larger than 64 kB. */ - if (urb->transfer_buffer_length > 0xffff) { - panic("urb->transfer_buffer_length > 0xffff"); - } - - sb_desc->sw_len = urb->transfer_buffer_length; - - /* The rem field is don't care if it's not a full-length transfer, so setting - it shouldn't hurt. Also, rem isn't used for OUT traffic. */ - sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - /* The full field is set to yes, even if we don't actually check that this is - a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0). - Setting full prevents the USB controller from sending an empty packet in - that case. However, if URB_ZERO_PACKET was set we want that. */ - if (!(urb->transfer_flags & URB_ZERO_PACKET)) { - sb_desc->command |= IO_STATE(USB_SB_command, full, yes); - } - - sb_desc->buf = virt_to_phys(urb->transfer_buffer); - sb_desc->next = 0; - - } else if (usb_pipein(urb->pipe)) { - - dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid); - - sb_desc->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - - /* The rem field is don't care if it's not a full-length transfer, so setting - it shouldn't hurt. */ - sb_desc->command = - (IO_FIELD(USB_SB_command, rem, - urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc->buf = 0; - sb_desc->next = 0; - } - - urb_priv->first_sb = sb_desc; - urb_priv->last_sb = sb_desc; - urb_priv->epid = epid; - - urb->hcpriv = urb_priv; - - /* Reset toggle bits and reset error count. */ - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - /* FIXME: Is this a special case since the hold field is checked, - or should we check hold in a lot of other cases as well? */ - if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { - panic("Hold was set in %s", __FUNCTION__); - } - - /* Reset error counters (regardless of which direction this traffic is). */ - *R_USB_EPT_DATA &= - ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | - IO_MASK(R_USB_EPT_DATA, error_count_out)); - - /* Software must preset the toggle bits. */ - if (usb_pipeout(urb->pipe)) { - char toggle = - usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); - *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); - *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); - } else { - char toggle = - usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); - *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); - *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); - } - - /* Assert that the EP descriptor is disabled. */ - assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); - - /* The reason we set the EP's sub pointer directly instead of - walking the SB list and linking it last in the list is that we only - have one active urb at a time (the rest are queued). */ - - /* Note that we cannot have interrupts running when we have set the SB descriptor - but the EP is not yet enabled. If a bulk eot happens for another EP, we will - find this EP disabled and with a SB != 0, which will make us think that it's done. */ - TxBulkEPList[epid].sub = virt_to_phys(sb_desc); - TxBulkEPList[epid].hw_len = 0; - /* Note that we don't have to fill in the ep_id field since this - was done when we allocated the EP descriptors in init_tx_bulk_ep. */ - - /* Check if the dummy list is already with us (if several urbs were queued). */ - if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) { - - dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d", - (unsigned long)urb, epid); - - /* The last EP in the dummy list already has its next pointer set to - TxBulkEPList[epid].next. */ - - /* We don't need to check if the DMA is at this EP or not before changing the - next pointer, since we will do it in one 32-bit write (EP descriptors are - 32-bit aligned). */ - TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); - } - /* Enable the EP descr. */ - dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid); - TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* Everything is set up, safe to enable interrupts again. */ - restore_flags(flags); - - /* If the DMA bulk channel isn't running, we need to restart it if it - has stopped at the last EP descriptor (DMA stopped because there was - no more traffic) or if it has stopped at a dummy EP with the intr flag - set (DMA stopped because we were too slow in inserting new traffic). */ - if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { - - USB_EP_Desc_t *ep; - ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); - dbg_bulk("DMA channel not running in add"); - dbg_bulk("DMA is at 0x%lx", (unsigned long)ep); - - if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) || - (ep->command & 0x8) >> 3) { - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - /* Update/restart the bulk start timer since we just started the channel. */ - mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); - /* Update/restart the bulk eot timer since we just inserted traffic. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - } - } - - DBFEXIT; -} - -static void etrax_usb_complete_bulk_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - unsigned long flags; - - DBFENTER; - - if (status) - warn("Completing bulk urb with status %d.", status); - - dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid); - - /* Update the urb list. */ - urb_list_del(urb, epid); - - /* For an IN pipe, we always set the actual length, regardless of whether there was - an error or not (which means the device driver can use the data if it wants to). */ - if (usb_pipein(urb->pipe)) { - urb->actual_length = urb_priv->rx_offset; - } else { - /* Set actual_length for OUT urbs also; the USB mass storage driver seems - to want that. We wouldn't know of any partial writes if there was an error. */ - if (status == 0) { - urb->actual_length = urb->transfer_buffer_length; - } else { - urb->actual_length = 0; - } - } - - /* FIXME: Is there something of the things below we shouldn't do if there was an error? - Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */ - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */ - if (usb_pipeout(urb->pipe)) { - char toggle = - IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); - usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), - usb_pipeout(urb->pipe), toggle); - } else { - char toggle = - IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); - usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), - usb_pipeout(urb->pipe), toggle); - } - restore_flags(flags); - - /* Remember to free the SBs. */ - etrax_remove_from_sb_list(urb); - kfree(urb_priv); - urb->hcpriv = 0; - - /* If there are any more urb's in the list we'd better start sending */ - if (!urb_list_empty(epid)) { - - struct urb *new_urb; - - /* Get the first urb. */ - new_urb = urb_list_first(epid); - assert(new_urb); - - dbg_bulk("More bulk for epid %d", epid); - - etrax_usb_add_to_bulk_sb_list(new_urb, epid); - } - - urb->status = status; - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (usb_pipein(urb->pipe) && - (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { - urb->status = -EREMOTEIO; - } - } - } - - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (urb_list_empty(epid)) { - /* This means that this EP is now free, deconfigure it. */ - etrax_usb_free_epid(epid); - - /* No more traffic; time to clean up. - Must set sub pointer to 0, since we look at the sub pointer when handling - the bulk eot interrupt. */ - - dbg_bulk("No bulk for epid %d", epid); - - TxBulkEPList[epid].sub = 0; - - /* Unlink the dummy list. */ - - dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d", - (unsigned long)urb, epid); - - /* No need to wait for the DMA before changing the next pointer. - The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use - the last one (INVALID_EPID) for actual traffic. */ - TxBulkEPList[epid].next = - virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); - } - - DBFEXIT; -} - -static int etrax_usb_submit_ctrl_urb(struct urb *urb) -{ - int epid; - int empty; - unsigned long flags; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */ - - /* Epid allocation, empty check and list add must be protected. - - Epid allocation because if we find an existing epid for this endpoint an urb might be - completed (emptying the list) before we add the new urb to the list, causing the epid - to be de-allocated. We would then start the transfer with an invalid epid -> epid attn. - - Empty check and add because otherwise we might conclude that the list is not empty, - after which it becomes empty before we add the new urb to the list, causing us not to - insert the new traffic into the SB list. */ - - spin_lock_irqsave(&urb_list_lock, flags); - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - spin_unlock_irqrestore(&urb_list_lock, flags); - DBFEXIT; - return -ENOMEM; - } - empty = urb_list_empty(epid); - urb_list_add(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d", - (unsigned long)urb, empty ? "empty" : "", epid); - - /* Mark the urb as being in progress. */ - urb->status = -EINPROGRESS; - - /* Setup the hcpriv data. */ - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - /* This sets rx_offset to 0. */ - urb_priv->urb_state = NOT_STARTED; - urb->hcpriv = urb_priv; - - if (empty) { - etrax_usb_add_to_ctrl_sb_list(urb, epid); - } - - DBFEXIT; - - return 0; -} - -static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid) -{ - USB_SB_Desc_t *sb_desc_setup; - USB_SB_Desc_t *sb_desc_data; - USB_SB_Desc_t *sb_desc_status; - - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - - unsigned long flags; - char maxlen; - - DBFENTER; - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - - sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_setup != NULL); - sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_status != NULL); - - /* Initialize the mandatory setup SB descriptor (used only in control transfers) */ - sb_desc_setup->sw_len = 8; - sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, setup) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes)); - - sb_desc_setup->buf = virt_to_phys(urb->setup_packet); - - if (usb_pipeout(urb->pipe)) { - dbg_ctrl("Transfer for epid %d is OUT", epid); - - /* If this Control OUT transfer has an optional data stage we add an OUT token - before the mandatory IN (status) token, hence the reordered SB list */ - - sb_desc_setup->next = virt_to_phys(sb_desc_status); - if (urb->transfer_buffer) { - - dbg_ctrl("This OUT transfer has an extra data stage"); - - sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_data != NULL); - - sb_desc_setup->next = virt_to_phys(sb_desc_data); - - sb_desc_data->sw_len = urb->transfer_buffer_length; - sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes)); - sb_desc_data->buf = virt_to_phys(urb->transfer_buffer); - sb_desc_data->next = virt_to_phys(sb_desc_status); - } - - sb_desc_status->sw_len = 1; - sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc_status->buf = 0; - sb_desc_status->next = 0; - - } else if (usb_pipein(urb->pipe)) { - - dbg_ctrl("Transfer for epid %d is IN", epid); - dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length); - dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen); - - sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_data != NULL); - - sb_desc_setup->next = virt_to_phys(sb_desc_data); - - sb_desc_data->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - dbg_ctrl("sw_len got %d", sb_desc_data->sw_len); - - sb_desc_data->command = - (IO_FIELD(USB_SB_command, rem, - urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes)); - - sb_desc_data->buf = 0; - sb_desc_data->next = virt_to_phys(sb_desc_status); - - /* Read comment at zout_buffer declaration for an explanation to this. */ - sb_desc_status->sw_len = 1; - sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc_status->buf = virt_to_phys(&zout_buffer[0]); - sb_desc_status->next = 0; - } - - urb_priv->first_sb = sb_desc_setup; - urb_priv->last_sb = sb_desc_status; - urb_priv->epid = epid; - - urb_priv->urb_state = STARTED; - - /* Reset toggle bits and reset error count, remember to di and ei */ - /* Warning: it is possible that this locking doesn't work with bottom-halves */ - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { - panic("Hold was set in %s", __FUNCTION__); - } - - - /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits - are set to a specific value. Why the difference? Read "Transfer and Toggle Bits - in Designer's Reference, p. 8 - 11. */ - *R_USB_EPT_DATA &= - ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | - IO_MASK(R_USB_EPT_DATA, error_count_out) | - IO_MASK(R_USB_EPT_DATA, t_in) | - IO_MASK(R_USB_EPT_DATA, t_out)); - - /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now - (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */ - restore_flags(flags); - - /* Assert that the EP descriptor is disabled. */ - assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); - - /* Set up and enable the EP descriptor. */ - TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup); - TxCtrlEPList[epid].hw_len = 0; - TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - - DBFENTER; - - if (status) - warn("Completing ctrl urb with status %d.", status); - - dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb); - - /* Remove this urb from the list. */ - urb_list_del(urb, epid); - - /* For an IN pipe, we always set the actual length, regardless of whether there was - an error or not (which means the device driver can use the data if it wants to). */ - if (usb_pipein(urb->pipe)) { - urb->actual_length = urb_priv->rx_offset; - } - - /* FIXME: Is there something of the things below we shouldn't do if there was an error? - Like, maybe we shouldn't insert more traffic. */ - - /* Remember to free the SBs. */ - etrax_remove_from_sb_list(urb); - kfree(urb_priv); - urb->hcpriv = 0; - - /* If there are any more urbs in the list we'd better start sending. */ - if (!urb_list_empty(epid)) { - struct urb *new_urb; - - /* Get the first urb. */ - new_urb = urb_list_first(epid); - assert(new_urb); - - dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb); - - etrax_usb_add_to_ctrl_sb_list(new_urb, epid); - } - - urb->status = status; - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (usb_pipein(urb->pipe) && - (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { - urb->status = -EREMOTEIO; - } - } - } - - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (urb_list_empty(epid)) { - /* No more traffic. Time to clean up. */ - etrax_usb_free_epid(epid); - /* Must set sub pointer to 0. */ - dbg_ctrl("No ctrl for epid %d", epid); - TxCtrlEPList[epid].sub = 0; - } - - DBFEXIT; -} - -static int etrax_usb_submit_intr_urb(struct urb *urb) -{ - - int epid; - - DBFENTER; - - if (usb_pipeout(urb->pipe)) { - /* Unsupported transfer type. - We don't support interrupt out traffic. (If we do, we can't support - intervals for neither in or out traffic, but are forced to schedule all - interrupt traffic in one frame.) */ - return -EINVAL; - } - - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - return -ENOMEM; - } - - if (!urb_list_empty(epid)) { - /* There is already a queued urb for this endpoint. */ - etrax_usb_free_epid(epid); - return -ENXIO; - } - - urb->status = -EINPROGRESS; - - dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid); - - urb_list_add(urb, epid); - etrax_usb_add_to_intr_sb_list(urb, epid); - - return 0; - - DBFEXIT; -} - -static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid) -{ - - volatile USB_EP_Desc_t *tmp_ep; - volatile USB_EP_Desc_t *first_ep; - - char maxlen; - int interval; - int i; - - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - interval = urb->interval; - - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - urb->hcpriv = urb_priv; - - first_ep = &TxIntrEPList[0]; - - /* Round of the interval to 2^n, it is obvious that this code favours - smaller numbers, but that is actually a good thing */ - /* FIXME: The "rounding error" for larger intervals will be quite - large. For in traffic this shouldn't be a problem since it will only - mean that we "poll" more often. */ - for (i = 0; interval; i++) { - interval = interval >> 1; - } - interval = 1 << (i - 1); - - dbg_intr("Interval rounded to %d", interval); - - tmp_ep = first_ep; - i = 0; - do { - if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { - if ((i % interval) == 0) { - /* Insert the traffic ep after tmp_ep */ - USB_EP_Desc_t *ep_desc; - USB_SB_Desc_t *sb_desc; - - dbg_intr("Inserting EP for epid %d", epid); - - ep_desc = (USB_EP_Desc_t *) - kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - sb_desc = (USB_SB_Desc_t *) - kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(ep_desc != NULL); - CHECK_ALIGN(ep_desc); - assert(sb_desc != NULL); - - ep_desc->sub = virt_to_phys(sb_desc); - ep_desc->hw_len = 0; - ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | - IO_STATE(USB_EP_command, enable, yes)); - - - /* Round upwards the number of packets of size maxlen - that this SB descriptor should receive. */ - sb_desc->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - sb_desc->next = 0; - sb_desc->buf = 0; - sb_desc->command = - (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - ep_desc->next = tmp_ep->next; - tmp_ep->next = virt_to_phys(ep_desc); - } - i++; - } - tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); - } while (tmp_ep != first_ep); - - - /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */ - urb_priv->epid = epid; - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); - - DBFEXIT; -} - - - -static void etrax_usb_complete_intr_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - - DBFENTER; - - if (status) - warn("Completing intr urb with status %d.", status); - - dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb); - - urb->status = status; - urb->actual_length = urb_priv->rx_offset; - - dbg_intr("interrupt urb->actual_length = %d", urb->actual_length); - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { - urb->status = -EREMOTEIO; - } - } - } - - /* The driver will resubmit the URB so we need to remove it first */ - etrax_usb_unlink_urb(urb, 0); - if (urb->complete) { - urb->complete(urb, NULL); - } - - DBFEXIT; -} - - -static int etrax_usb_submit_isoc_urb(struct urb *urb) -{ - int epid; - unsigned long flags; - - DBFENTER; - - dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb); - - /* Epid allocation, empty check and list add must be protected. - Read about this in etrax_usb_submit_ctrl_urb. */ - - spin_lock_irqsave(&urb_list_lock, flags); - /* Is there an active epid for this urb ? */ - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - spin_unlock_irqrestore(&urb_list_lock, flags); - return -ENOMEM; - } - - /* Ok, now we got valid endpoint, lets insert some traffic */ - - urb->status = -EINPROGRESS; - - /* Find the last urb in the URB_List and add this urb after that one. - Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This - is important to make this in "real time" since isochronous traffic is - time sensitive. */ - - dbg_isoc("Adding isoc urb to (possibly empty) list"); - urb_list_add(urb, epid); - etrax_usb_add_to_isoc_sb_list(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - DBFEXIT; - - return 0; -} - -static void etrax_usb_check_error_isoc_ep(const int epid) -{ - unsigned long int flags; - int error_code; - __u32 r_usb_ept_data; - - /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof, - bulk_eot and epid_attn interrupts. So we just check the status of - the epid without testing if for it in R_USB_EPID_ATTN. */ - - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO - registers, they are located at the same address and are of the same size. - In other words, this read should be ok for isoc also. */ - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); - - if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { - warn("Hold was set for epid %d.", epid); - return; - } - - if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) { - - /* This indicates that the SB list of the ept was completed before - new data was appended to it. This is not an error, but indicates - large system or USB load and could possibly cause trouble for - very timing sensitive USB device drivers so we log it. - */ - info("Isoc. epid %d disabled with no error", epid); - return; - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) { - /* Not really a protocol error, just says that the endpoint gave - a stall response. Note that error_code cannot be stall for isoc. */ - panic("Isoc traffic cannot stall"); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) { - /* Two devices responded to a transaction request. Must be resolved - by software. FIXME: Reset ports? */ - panic("Bus error for epid %d." - " Two devices responded to transaction request", - epid); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { - /* DMA overrun or underrun. */ - warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - - /* It seems that error_code = buffer_error in - R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS - are the same error. */ - } -} - - -static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid) -{ - - int i = 0; - - etrax_urb_priv_t *urb_priv; - USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc; - - DBFENTER; - - prev_sb_desc = next_sb_desc = temp_sb_desc = NULL; - - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC); - assert(urb_priv != NULL); - - urb->hcpriv = urb_priv; - urb_priv->epid = epid; - - if (usb_pipeout(urb->pipe)) { - - if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n"); - - dbg_isoc("Transfer for epid %d is OUT", epid); - dbg_isoc("%d packets in URB", urb->number_of_packets); - - /* Create one SB descriptor for each packet and link them together. */ - for (i = 0; i < urb->number_of_packets; i++) { - if (!urb->iso_frame_desc[i].length) - continue; - - next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC); - assert(next_sb_desc != NULL); - - if (urb->iso_frame_desc[i].length > 0) { - - next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, eot, yes)); - - next_sb_desc->sw_len = urb->iso_frame_desc[i].length; - next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset); - - /* Check if full length transfer. */ - if (urb->iso_frame_desc[i].length == - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { - next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes); - } - } else { - dbg_isoc("zero len packet"); - next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, full, yes)); - - next_sb_desc->sw_len = 1; - next_sb_desc->buf = virt_to_phys(&zout_buffer[0]); - } - - /* First SB descriptor that belongs to this urb */ - if (i == 0) - urb_priv->first_sb = next_sb_desc; - else - prev_sb_desc->next = virt_to_phys(next_sb_desc); - - prev_sb_desc = next_sb_desc; - } - - next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - next_sb_desc->next = 0; - urb_priv->last_sb = next_sb_desc; - - } else if (usb_pipein(urb->pipe)) { - - dbg_isoc("Transfer for epid %d is IN", epid); - dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length); - dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length); - - /* Note that in descriptors for periodic traffic are not consumed. This means that - the USB controller never propagates in the SB list. In other words, if there already - is an SB descriptor in the list for this EP we don't have to do anything. */ - if (TxIsocEPList[epid].sub == 0) { - dbg_isoc("Isoc traffic not already running, allocating SB"); - - next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC); - assert(next_sb_desc != NULL); - - next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - next_sb_desc->next = 0; - next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant - for periodic in traffic as long as it is more - than zero. Set to 1 always. */ - next_sb_desc->buf = 0; - - /* The rem field is don't care for isoc traffic, so we don't set it. */ - - /* Only one SB descriptor that belongs to this urb. */ - urb_priv->first_sb = next_sb_desc; - urb_priv->last_sb = next_sb_desc; - - } else { - - dbg_isoc("Isoc traffic already running, just setting first/last_sb"); - - /* Each EP for isoc in will have only one SB descriptor, setup when submitting the - already active urb. Note that even though we may have several first_sb/last_sb - pointing at the same SB descriptor, they are freed only once (when the list has - become empty). */ - urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub); - urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub); - return; - } - - } - - /* Find the spot to insert this urb and add it. */ - if (TxIsocEPList[epid].sub == 0) { - /* First SB descriptor inserted in this list (in or out). */ - dbg_isoc("Inserting SB desc first in list"); - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); - - } else { - /* Isochronous traffic is already running, insert new traffic last (only out). */ - dbg_isoc("Inserting SB desc last in list"); - temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); - while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != - IO_STATE(USB_SB_command, eol, yes)) { - assert(temp_sb_desc->next); - temp_sb_desc = phys_to_virt(temp_sb_desc->next); - } - dbg_isoc("Appending list on desc 0x%p", temp_sb_desc); - - /* Next pointer must be set before eol is removed. */ - temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); - /* Clear the previous end of list flag since there is a new in the - added SB descriptor list. */ - temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); - - if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { - /* 8.8.5 in Designer's Reference says we should check for and correct - any errors in the EP here. That should not be necessary if epid_attn - is handled correctly, so we assume all is ok. */ - dbg_isoc("EP disabled"); - etrax_usb_check_error_isoc_ep(epid); - - /* The SB list was exhausted. */ - if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { - /* The new sublist did not get processed before the EP was - disabled. Setup the EP again. */ - dbg_isoc("Set EP sub to new list"); - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); - } - } - } - - if (urb->transfer_flags & URB_ISO_ASAP) { - /* The isoc transfer should be started as soon as possible. The start_frame - field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER - with a USB Chief trace shows that the first isoc IN token is sent 2 frames - later. I'm not sure how this affects usage of the start_frame field by the - device driver, or how it affects things when USB_ISO_ASAP is not set, so - therefore there's no compensation for the 2 frame "lag" here. */ - urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - urb_priv->urb_state = STARTED; - dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame); - } else { - /* Not started yet. */ - urb_priv->urb_state = NOT_STARTED; - dbg_isoc("urb_priv->urb_state set to NOT_STARTED"); - } - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_complete_isoc_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - int auto_resubmit = 0; - - DBFENTER; - dbg_isoc("complete urb 0x%p, status %d", urb, status); - - if (status) - warn("Completing isoc urb with status %d.", status); - - if (usb_pipein(urb->pipe)) { - int i; - - /* Make that all isoc packets have status and length set before - completing the urb. */ - for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) { - urb->iso_frame_desc[i].actual_length = 0; - urb->iso_frame_desc[i].status = -EPROTO; - } - - urb_list_del(urb, epid); - - if (!list_empty(&urb_list[epid])) { - ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; - } else { - unsigned long int flags; - if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); - } - - etrax_remove_from_sb_list(urb); - TxIsocEPList[epid].sub = 0; - TxIsocEPList[epid].hw_len = 0; - - save_flags(flags); - cli(); - etrax_usb_free_epid(epid); - restore_flags(flags); - } - - urb->hcpriv = 0; - kfree(urb_priv); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - } else if (usb_pipeout(urb->pipe)) { - int freed_descr; - - dbg_isoc("Isoc out urb complete 0x%p", urb); - - /* Update the urb list. */ - urb_list_del(urb, epid); - - freed_descr = etrax_remove_from_sb_list(urb); - dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets); - assert(freed_descr == urb->number_of_packets); - urb->hcpriv = 0; - kfree(urb_priv); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - } - - urb->status = status; - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (auto_resubmit) { - /* Check that urb was not unlinked by the complete callback. */ - if (__urb_list_entry(urb, epid)) { - /* Move this one down the list. */ - urb_list_move_last(urb, epid); - - /* Mark the now first urb as started (may already be). */ - ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; - - /* Must set this to 0 since this urb is still active after - completion. */ - urb_priv->isoc_packet_counter = 0; - } else { - warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb); - } - } - - DBFEXIT; -} - -static void etrax_usb_complete_urb(struct urb *urb, int status) -{ - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - etrax_usb_complete_bulk_urb(urb, status); - break; - case PIPE_CONTROL: - etrax_usb_complete_ctrl_urb(urb, status); - break; - case PIPE_INTERRUPT: - etrax_usb_complete_intr_urb(urb, status); - break; - case PIPE_ISOCHRONOUS: - etrax_usb_complete_isoc_urb(urb, status); - break; - default: - err("Unknown pipetype"); - } -} - - - -static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc) -{ - usb_interrupt_registers_t *reg; - unsigned long flags; - __u32 irq_mask; - __u8 status; - __u32 epid_attn; - __u16 port_status_1; - __u16 port_status_2; - __u32 fm_number; - - DBFENTER; - - /* Read critical registers into local variables, do kmalloc afterwards. */ - save_flags(flags); - cli(); - - irq_mask = *R_USB_IRQ_MASK_READ; - /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS - must be read before R_USB_EPID_ATTN since reading the latter clears the - ourun and perror fields of R_USB_STATUS. */ - status = *R_USB_STATUS; - - /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */ - epid_attn = *R_USB_EPID_ATTN; - - /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the - port_status interrupt. */ - port_status_1 = *R_USB_RH_PORT_STATUS_1; - port_status_2 = *R_USB_RH_PORT_STATUS_2; - - /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ - /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */ - fm_number = *R_USB_FM_NUMBER; - - restore_flags(flags); - - reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, GFP_ATOMIC); - - assert(reg != NULL); - - reg->hc = (etrax_hc_t *)vhc; - - /* Now put register values into kmalloc'd area. */ - reg->r_usb_irq_mask_read = irq_mask; - reg->r_usb_status = status; - reg->r_usb_epid_attn = epid_attn; - reg->r_usb_rh_port_status_1 = port_status_1; - reg->r_usb_rh_port_status_2 = port_status_2; - reg->r_usb_fm_number = fm_number; - - INIT_WORK(®->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg); - schedule_work(®->usb_bh); - - DBFEXIT; - - return IRQ_HANDLED; -} - -static void etrax_usb_hc_interrupt_bottom_half(void *data) -{ - usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data; - __u32 irq_mask = reg->r_usb_irq_mask_read; - - DBFENTER; - - /* Interrupts are handled in order of priority. */ - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { - etrax_usb_hc_epid_attn_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { - etrax_usb_hc_port_status_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { - etrax_usb_hc_ctl_status_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { - etrax_usb_hc_isoc_eof_interrupt(); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { - /* Update/restart the bulk start timer since obviously the channel is running. */ - mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); - /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - - etrax_usb_hc_bulk_eot_interrupt(0); - } - - kmem_cache_free(top_half_reg_cache, reg); - - DBFEXIT; -} - - -void etrax_usb_hc_isoc_eof_interrupt(void) -{ - struct urb *urb; - etrax_urb_priv_t *urb_priv; - int epid; - unsigned long flags; - - DBFENTER; - - /* Do not check the invalid epid (it has a valid sub pointer). */ - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - - /* Do not check the invalid epid (it has a valid sub pointer). */ - if ((epid == DUMMY_EPID) || (epid == INVALID_EPID)) - continue; - - /* Disable interrupts to block the isoc out descriptor interrupt handler - from being called while the isoc EPID list is being checked. - */ - save_flags(flags); - cli(); - - if (TxIsocEPList[epid].sub == 0) { - /* Nothing here to see. */ - restore_flags(flags); - continue; - } - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - if (urb == 0) { - warn("Ignoring NULL urb"); - restore_flags(flags); - continue; - } - if (usb_pipein(urb->pipe)) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == NOT_STARTED) { - - /* If ASAP is not set and urb->start_frame is the current frame, - start the transfer. */ - if (!(urb->transfer_flags & URB_ISO_ASAP) && - (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { - - dbg_isoc("Enabling isoc IN EP descr for epid %d", epid); - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* This urb is now active. */ - urb_priv->urb_state = STARTED; - continue; - } - } - } - restore_flags(flags); - } - - DBFEXIT; - -} - -void etrax_usb_hc_bulk_eot_interrupt(int timer_induced) -{ - int epid; - - /* The technique is to run one urb at a time, wait for the eot interrupt at which - point the EP descriptor has been disabled. */ - - DBFENTER; - dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : ""); - - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - - if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && - (TxBulkEPList[epid].sub != 0)) { - - struct urb *urb; - etrax_urb_priv_t *urb_priv; - unsigned long flags; - __u32 r_usb_ept_data; - - /* Found a disabled EP descriptor which has a non-null sub pointer. - Verify that this ctrl EP descriptor got disabled no errors. - FIXME: Necessary to check error_code? */ - dbg_bulk("for epid %d?", epid); - - /* Get the first urb. */ - urb = urb_list_first(epid); - - /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of - wrong unlinking? */ - if (!urb) { - warn("NULL urb for epid %d", epid); - continue; - } - - assert(urb); - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - /* Sanity checks. */ - assert(usb_pipetype(urb->pipe) == PIPE_BULK); - if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { - err("bulk endpoint got disabled before reaching last sb"); - } - - /* For bulk IN traffic, there seems to be a race condition between - between the bulk eot and eop interrupts, or rather an uncertainty regarding - the order in which they happen. Normally we expect the eop interrupt from - DMA channel 9 to happen before the eot interrupt. - - Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */ - - if (usb_pipein(urb->pipe)) { - dbg_bulk("in urb, continuing"); - continue; - } - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) == - IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { - /* This means that the endpoint has no error, is disabled - and had inserted traffic, i.e. transfer successfully completed. */ - etrax_usb_complete_bulk_urb(urb, 0); - } else { - /* Shouldn't happen. We expect errors to be caught by epid attention. */ - err("Found disabled bulk EP desc, error_code != no_error"); - } - } - } - - /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer. - However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may - not. Also, we might find two disabled EPs when handling an eot interrupt, and then find - none the next time. */ - - DBFEXIT; - -} - -void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg) -{ - /* This function handles the epid attention interrupt. There are a variety of reasons - for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details): - - invalid ep_id - Invalid epid in an EP (EP disabled). - stall - Not strictly an error condition (EP disabled). - 3rd error - Three successive transaction errors (EP disabled). - buffer ourun - Buffer overrun or underrun (EP disabled). - past eof1 - Intr or isoc transaction proceeds past EOF1. - near eof - Intr or isoc transaction would not fit inside the frame. - zout transfer - If zout transfer for a bulk endpoint (EP disabled). - setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */ - - int epid; - - - DBFENTER; - - assert(reg != NULL); - - /* Note that we loop through all epids. We still want to catch errors for - the invalid one, even though we might handle them differently. */ - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - - if (test_bit(epid, (void *)®->r_usb_epid_attn)) { - - struct urb *urb; - __u32 r_usb_ept_data; - unsigned long flags; - int error_code; - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO - registers, they are located at the same address and are of the same size. - In other words, this read should be ok for isoc also. */ - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - /* First some sanity checks. */ - if (epid == INVALID_EPID) { - /* FIXME: What if it became disabled? Could seriously hurt interrupt - traffic. (Use do_intr_recover.) */ - warn("Got epid_attn for INVALID_EPID (%d).", epid); - err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); - err("R_USB_STATUS = 0x%x", reg->r_usb_status); - continue; - } else if (epid == DUMMY_EPID) { - /* We definitely don't care about these ones. Besides, they are - always disabled, so any possible disabling caused by the - epid attention interrupt is irrelevant. */ - warn("Got epid_attn for DUMMY_EPID (%d).", epid); - continue; - } - - /* Get the first urb in the urb list for this epid. We blatantly assume - that only the first urb could have caused the epid attention. - (For bulk and ctrl, only one urb is active at any one time. For intr - and isoc we remove them once they are completed.) */ - urb = urb_list_first(epid); - - if (urb == NULL) { - err("Got epid_attn for epid %i with no urb.", epid); - err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); - err("R_USB_STATUS = 0x%x", reg->r_usb_status); - continue; - } - - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - warn("Got epid attn for bulk endpoint, epid %d", epid); - break; - case PIPE_CONTROL: - warn("Got epid attn for control endpoint, epid %d", epid); - break; - case PIPE_INTERRUPT: - warn("Got epid attn for interrupt endpoint, epid %d", epid); - break; - case PIPE_ISOCHRONOUS: - warn("Got epid attn for isochronous endpoint, epid %d", epid); - break; - } - - if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { - if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { - warn("Hold was set for epid %d.", epid); - continue; - } - } - - /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and - R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */ - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); - } else { - error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data); - } - - /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ - if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { - - /* Isoc traffic doesn't have error_count_in/error_count_out. */ - if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && - (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 || - IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) { - /* 3rd error. */ - warn("3rd error for epid %i", epid); - etrax_usb_complete_urb(urb, -EPROTO); - - } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { - - warn("Perror for epid %d", epid); - - if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { - /* invalid ep_id */ - panic("Perror because of invalid epid." - " Deconfigured too early?"); - } else { - /* past eof1, near eof, zout transfer, setup transfer */ - - /* Dump the urb and the relevant EP descriptor list. */ - - __dump_urb(urb); - __dump_ept_data(epid); - __dump_ep_list(usb_pipetype(urb->pipe)); - - panic("Something wrong with DMA descriptor contents." - " Too much traffic inserted?"); - } - } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { - /* buffer ourun */ - panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - } - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) { - /* Not really a protocol error, just says that the endpoint gave - a stall response. Note that error_code cannot be stall for isoc. */ - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - panic("Isoc traffic cannot stall"); - } - - warn("Stall for epid %d", epid); - etrax_usb_complete_urb(urb, -EPIPE); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) { - /* Two devices responded to a transaction request. Must be resolved - by software. FIXME: Reset ports? */ - panic("Bus error for epid %d." - " Two devices responded to transaction request", - epid); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { - /* DMA overrun or underrun. */ - warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - - /* It seems that error_code = buffer_error in - R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS - are the same error. */ - etrax_usb_complete_urb(urb, -EPROTO); - } - } - } - - DBFEXIT; - -} - -void etrax_usb_bulk_start_timer_func(unsigned long dummy) -{ - - /* We might enable an EP descriptor behind the current DMA position when it's about - to decide that there are no more bulk traffic and it should stop the bulk channel. - Therefore we periodically check if the bulk channel is stopped and there is an - enabled bulk EP descriptor, in which case we start the bulk channel. */ - dbg_bulk("bulk_start_timer timed out."); - - if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { - int epid; - - dbg_bulk("Bulk DMA channel not running."); - - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n", - epid); - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - - /* Restart the bulk eot timer since we just started the bulk channel. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - - /* No need to search any further. */ - break; - } - } - } else { - dbg_bulk("Bulk DMA channel running."); - } -} - -void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg) -{ - etrax_hc_t *hc = reg->hc; - __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1; - __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2; - - DBFENTER; - - /* The Etrax RH does not include a wPortChange register, so this has to be handled in software - (by saving the old port status value for comparison when the port status interrupt happens). - See section 11.16.2.6.2 in the USB 1.1 spec for details. */ - - dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1); - dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2); - dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1); - dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2); - - /* C_PORT_CONNECTION is set on any transition. */ - hc->rh.wPortChange_1 |= - ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) != - (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ? - (1 << RH_PORT_CONNECTION) : 0; - - hc->rh.wPortChange_2 |= - ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) != - (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ? - (1 << RH_PORT_CONNECTION) : 0; - - /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when - the port is disabled, not when it's enabled. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ? - (1 << RH_PORT_ENABLE) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ? - (1 << RH_PORT_ENABLE) : 0; - - /* C_PORT_SUSPEND is set to one when the device has transitioned out - of the suspended state, i.e. when suspend goes from one to zero. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ? - (1 << RH_PORT_SUSPEND) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ? - (1 << RH_PORT_SUSPEND) : 0; - - - /* C_PORT_RESET is set when reset processing on this port is complete. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ? - (1 << RH_PORT_RESET) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ? - (1 << RH_PORT_RESET) : 0; - - /* Save the new values for next port status change. */ - hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1; - hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2; - - dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1); - dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2); - - DBFEXIT; - -} - -void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg) -{ - DBFENTER; - - /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB - list for the corresponding epid? */ - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { - panic("USB controller got ourun."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { - - /* Before, etrax_usb_do_intr_recover was called on this epid if it was - an interrupt pipe. I don't see how re-enabling all EP descriptors - will help if there was a programming error. */ - panic("USB controller got perror."); - } - - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { - /* We should never operate in device mode. */ - panic("USB controller in device mode."); - } - - /* These if-statements could probably be nested. */ - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) { - info("USB controller in host mode."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) { - info("USB controller started."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) { - info("USB controller running."); - } - - DBFEXIT; - -} - - -static int etrax_rh_submit_urb(struct urb *urb) -{ - struct usb_device *usb_dev = urb->dev; - etrax_hc_t *hc = usb_dev->bus->hcpriv; - unsigned int pipe = urb->pipe; - struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet; - void *data = urb->transfer_buffer; - int leni = urb->transfer_buffer_length; - int len = 0; - int stat = 0; - - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - - DBFENTER; - - /* FIXME: What is this interrupt urb that is sent to the root hub? */ - if (usb_pipetype (pipe) == PIPE_INTERRUPT) { - dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval); - hc->rh.urb = urb; - hc->rh.send = 1; - /* FIXME: We could probably remove this line since it's done - in etrax_rh_init_int_timer. (Don't remove it from - etrax_rh_init_int_timer though.) */ - hc->rh.interval = urb->interval; - etrax_rh_init_int_timer(urb); - DBFEXIT; - - return 0; - } - - bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8); - wValue = le16_to_cpu(cmd->wValue); - wIndex = le16_to_cpu(cmd->wIndex); - wLength = le16_to_cpu(cmd->wLength); - - dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq); - dbg_rh("wValue : 0x%04x (%d)", wValue, wValue); - dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex); - dbg_rh("wLength : 0x%04x (%d)", wLength, wLength); - - switch (bmRType_bReq) { - - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(__u16 *) data = cpu_to_le16 (1); - OK (2); - - case RH_GET_STATUS | RH_INTERFACE: - *(__u16 *) data = cpu_to_le16 (0); - OK (2); - - case RH_GET_STATUS | RH_ENDPOINT: - *(__u16 *) data = cpu_to_le16 (0); - OK (2); - - case RH_GET_STATUS | RH_CLASS: - *(__u32 *) data = cpu_to_le32 (0); - OK (4); /* hub power ** */ - - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - if (wIndex == 1) { - *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1); - *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1); - } else if (wIndex == 2) { - *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2); - *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2); - } else { - dbg_rh("RH_GET_STATUS whith invalid wIndex!"); - OK(0); - } - - OK(4); - - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): - OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case (RH_C_HUB_OVER_CURRENT): - OK (0); /* hub power over current ** */ - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_ENABLE): - if (wIndex == 1) { - - dbg_rh("trying to do disable port 1"); - - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); - - while (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)); - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); - dbg_rh("Port 1 is disabled"); - - } else if (wIndex == 2) { - - dbg_rh("trying to do disable port 2"); - - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); - - while (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)); - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); - dbg_rh("Port 2 is disabled"); - - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_SUSPEND): - /* Opposite to suspend should be resume, so we'll do a resume. */ - /* FIXME: USB 1.1, 11.16.2.2 says: - "Clearing the PORT_SUSPEND feature causes a host-initiated resume - on the specified port. If the port is not in the Suspended state, - the hub should treat this request as a functional no-operation." - Shouldn't we check if the port is in a suspended state before - resuming? */ - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - if (wIndex == 1) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, resume) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else if (wIndex == 2) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, resume) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_POWER): - OK (0); /* port power ** */ - case (RH_C_PORT_CONNECTION): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_C_PORT_ENABLE): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE " - "with invalid wIndex == %d!", wIndex); - } - OK (0); - case (RH_C_PORT_SUSPEND): -/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ - OK (0); - case (RH_C_PORT_OVER_CURRENT): - OK (0); /* port power over current ** */ - case (RH_C_PORT_RESET): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET " - "with invalid index == %d!", wIndex); - } - - OK (0); - - } - break; - - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_SUSPEND): - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - if (wIndex == 1) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, suspend) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else if (wIndex == 2) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, suspend) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else { - dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_RESET): - if (wIndex == 1) { - - port_1_reset: - dbg_rh("Doing reset of port 1"); - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - - /* We must wait at least 10 ms for the device to recover. - 15 ms should be enough. */ - udelay(15000); - - /* Wait for reset bit to go low (should be done by now). */ - while (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)); - - /* If the port status is - 1) connected and enabled then there is a device and everything is fine - 2) neither connected nor enabled then there is no device, also fine - 3) connected and not enabled then we try again - (Yes, there are other port status combinations besides these.) */ - - if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { - dbg_rh("Connected device on port 1, but port not enabled?" - " Trying reset again."); - goto port_2_reset; - } - - /* Diagnostic printouts. */ - if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { - dbg_rh("No connected device on port 1"); - } else if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) { - dbg_rh("Connected device on port 1, port 1 enabled"); - } - - } else if (wIndex == 2) { - - port_2_reset: - dbg_rh("Doing reset of port 2"); - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Issue the reset command. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - - /* We must wait at least 10 ms for the device to recover. - 15 ms should be enough. */ - udelay(15000); - - /* Wait for reset bit to go low (should be done by now). */ - while (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes)); - - /* If the port status is - 1) connected and enabled then there is a device and everything is fine - 2) neither connected nor enabled then there is no device, also fine - 3) connected and not enabled then we try again - (Yes, there are other port status combinations besides these.) */ - - if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { - dbg_rh("Connected device on port 2, but port not enabled?" - " Trying reset again."); - goto port_2_reset; - } - - /* Diagnostic printouts. */ - if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { - dbg_rh("No connected device on port 2"); - } else if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) { - dbg_rh("Connected device on port 2, port 2 enabled"); - } - - } else { - dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex); - } - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* If all enabled ports were disabled the host controller goes down into - started mode, so we need to bring it back into the running state. - (This is safe even if it's already in the running state.) */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); - - dbg_rh("...Done"); - OK(0); - - case (RH_PORT_POWER): - OK (0); /* port power ** */ - case (RH_PORT_ENABLE): - /* There is no port enable command in the host controller, so if the - port is already enabled, we do nothing. If not, we reset the port - (with an ugly goto). */ - - if (wIndex == 1) { - if (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) { - goto port_1_reset; - } - } else if (wIndex == 2) { - if (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) { - goto port_2_reset; - } - } else { - dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex); - } - OK (0); - } - break; - - case RH_SET_ADDRESS: - hc->rh.devnum = wValue; - dbg_rh("RH address set to: %d", hc->rh.devnum); - OK (0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength)); - memcpy (data, root_hub_dev_des, len); - OK (len); - case (0x02): /* configuration descriptor */ - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength)); - memcpy (data, root_hub_config_des, len); - OK (len); - case (0x03): /* string descriptors */ - len = usb_root_hub_string (wValue & 0xff, - 0xff, "ETRAX 100LX", - data, wLength); - if (len > 0) { - OK(min(leni, len)); - } else { - stat = -EPIPE; - } - - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - root_hub_hub_des[2] = hc->rh.numports; - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength)); - memcpy (data, root_hub_hub_des, len); - OK (len); - - case RH_GET_CONFIGURATION: - *(__u8 *) data = 0x01; - OK (1); - - case RH_SET_CONFIGURATION: - OK (0); - - default: - stat = -EPIPE; - } - - urb->actual_length = len; - urb->status = stat; - urb->dev = NULL; - if (urb->complete) { - urb->complete(urb, NULL); - } - DBFEXIT; - - return 0; -} - -static void -etrax_usb_bulk_eot_timer_func(unsigned long dummy) -{ - /* Because of a race condition in the top half, we might miss a bulk eot. - This timer "simulates" a bulk eot if we don't get one for a while, hopefully - correcting the situation. */ - dbg_bulk("bulk_eot_timer timed out."); - etrax_usb_hc_bulk_eot_interrupt(1); -} - -static void* -etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, - unsigned mem_flags, dma_addr_t *dma) -{ - return kmalloc(size, mem_flags); -} - -static void -etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma) -{ - kfree(addr); -} - - -static struct device fake_device; - -static int __init etrax_usb_hc_init(void) -{ - static etrax_hc_t *hc; - struct usb_bus *bus; - struct usb_device *usb_rh; - int i; - - DBFENTER; - - info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version); - - hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL); - assert(hc != NULL); - - /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ - /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate - SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) == - sizeof(USB_SB_Desc_t). */ - - usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0, - SLAB_HWCACHE_ALIGN, 0, 0); - assert(usb_desc_cache != NULL); - - top_half_reg_cache = kmem_cache_create("top_half_reg_cache", - sizeof(usb_interrupt_registers_t), - 0, SLAB_HWCACHE_ALIGN, 0, 0); - assert(top_half_reg_cache != NULL); - - isoc_compl_cache = kmem_cache_create("isoc_compl_cache", - sizeof(usb_isoc_complete_data_t), - 0, SLAB_HWCACHE_ALIGN, 0, 0); - assert(isoc_compl_cache != NULL); - - etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations); - hc->bus = bus; - bus->bus_name="ETRAX 100LX"; - bus->hcpriv = hc; - - /* Initialize RH to the default address. - And make sure that we have no status change indication */ - hc->rh.numports = 2; /* The RH has two ports */ - hc->rh.devnum = 1; - hc->rh.wPortChange_1 = 0; - hc->rh.wPortChange_2 = 0; - - /* Also initate the previous values to zero */ - hc->rh.prev_wPortStatus_1 = 0; - hc->rh.prev_wPortStatus_2 = 0; - - /* Initialize the intr-traffic flags */ - /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */ - hc->intr.sleeping = 0; - hc->intr.wq = NULL; - - epid_usage_bitmask = 0; - epid_out_traffic = 0; - - /* Mark the invalid epid as being used. */ - set_bit(INVALID_EPID, (void *)&epid_usage_bitmask); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID); - nop(); - /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */ - *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) | - IO_FIELD(R_USB_EPT_DATA, max_len, 1)); - - /* Mark the dummy epid as being used. */ - set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID); - nop(); - *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) | - IO_FIELD(R_USB_EPT_DATA, max_len, 1)); - - /* Initialize the urb list by initiating a head for each list. */ - for (i = 0; i < NBR_OF_EPIDS; i++) { - INIT_LIST_HEAD(&urb_list[i]); - } - spin_lock_init(&urb_list_lock); - - INIT_LIST_HEAD(&urb_unlink_list); - - - /* Initiate the bulk start timer. */ - init_timer(&bulk_start_timer); - bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; - bulk_start_timer.function = etrax_usb_bulk_start_timer_func; - add_timer(&bulk_start_timer); - - - /* Initiate the bulk eot timer. */ - init_timer(&bulk_eot_timer); - bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; - bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func; - add_timer(&bulk_eot_timer); - - /* Set up the data structures for USB traffic. Note that this must be done before - any interrupt that relies on sane DMA list occurrs. */ - init_rx_buffers(); - init_tx_bulk_ep(); - init_tx_ctrl_ep(); - init_tx_intr_ep(); - init_tx_isoc_ep(); - - device_initialize(&fake_device); - kobject_set_name(&fake_device.kobj, "etrax_usb"); - kobject_add(&fake_device.kobj); - kobject_uevent(&fake_device.kobj, KOBJ_ADD); - hc->bus->controller = &fake_device; - usb_register_bus(hc->bus); - - *R_IRQ_MASK2_SET = - /* Note that these interrupts are not used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | - /* Sub channel 1 (ctrl) descr. interrupts are used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | - IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | - /* Sub channel 3 (isoc) descr. interrupts are used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); - - /* Note that the dma9_descr interrupt is not used. */ - *R_IRQ_MASK2_SET = - IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | - IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); - - /* FIXME: Enable iso_eof only when isoc traffic is running. */ - *R_USB_IRQ_MASK_SET = - IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | - IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | - IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | - IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | - IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); - - - if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0, - "ETRAX 100LX built-in USB (HC)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0, - "ETRAX 100LX built-in USB (Rx)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0, - "ETRAX 100LX built-in USB (Tx)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - /* R_USB_COMMAND: - USB commands in host mode. The fields in this register should all be - written to in one write. Do not read-modify-write one field at a time. A - write to this register will trigger events in the USB controller and an - incomplete command may lead to unpredictable results, and in worst case - even to a deadlock in the controller. - (Note however that the busy field is read-only, so no need to write to it.) */ - - /* Check the busy bit before writing to R_USB_COMMAND. */ - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Reset the USB interface. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); - - /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800), - to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may - allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation. - - While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK - behaviour, it doesn't solve this problem. What happens is that a control transfer will not - be interrupted in its data stage when PSTART happens (the point at which periodic traffic - is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before - PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done, - there may be too little time left for an isochronous transfer, causing an epid attention - interrupt due to perror. The work-around for this is to let the control transfers run at the - end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't - fit into the frame. However, since there will *always* be a control transfer at the beginning - of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer - which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to - this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make - sure that the periodic transfers that are inserted will always fit in the frame. - - The idea was suggested that a control transfer could be split up into several 8 byte transfers, - so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this - hasn't been implemented. - - The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra - for possible bit stuffing. */ - - *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); - -#ifdef CONFIG_ETRAX_USB_HOST_PORT1 - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -#endif - -#ifdef CONFIG_ETRAX_USB_HOST_PORT2 - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -#endif - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Configure the USB interface as a host controller. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); - - /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled - sequence of resetting the ports. If we reset both ports now, and there are devices - on both ports, we will get a bus error because both devices will answer the set address - request. */ - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Start processing of USB traffic. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - usb_rh = usb_alloc_dev(NULL, hc->bus, 0); - hc->bus->root_hub = usb_rh; - usb_rh->state = USB_STATE_ADDRESS; - usb_rh->speed = USB_SPEED_FULL; - usb_rh->devnum = 1; - hc->bus->devnum_next = 2; - usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64); - usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE); - usb_new_device(usb_rh); - - DBFEXIT; - - return 0; -} - -static void etrax_usb_hc_cleanup(void) -{ - DBFENTER; - - free_irq(ETRAX_USB_HC_IRQ, NULL); - free_irq(ETRAX_USB_RX_IRQ, NULL); - free_irq(ETRAX_USB_TX_IRQ, NULL); - - usb_deregister_bus(etrax_usb_bus); - - /* FIXME: call kmem_cache_destroy here? */ - - DBFEXIT; -} - -module_init(etrax_usb_hc_init); -module_exit(etrax_usb_hc_cleanup); diff --git a/drivers/usb/host/hc_crisv10.h b/drivers/usb/host/hc_crisv10.h deleted file mode 100644 index 62f77111d418..000000000000 --- a/drivers/usb/host/hc_crisv10.h +++ /dev/null @@ -1,289 +0,0 @@ -#ifndef __LINUX_ETRAX_USB_H -#define __LINUX_ETRAX_USB_H - -#include <linux/types.h> -#include <linux/list.h> - -typedef struct USB_IN_Desc { - volatile __u16 sw_len; - volatile __u16 command; - volatile unsigned long next; - volatile unsigned long buf; - volatile __u16 hw_len; - volatile __u16 status; -} USB_IN_Desc_t; - -typedef struct USB_SB_Desc { - volatile __u16 sw_len; - volatile __u16 command; - volatile unsigned long next; - volatile unsigned long buf; - __u32 dummy; -} USB_SB_Desc_t; - -typedef struct USB_EP_Desc { - volatile __u16 hw_len; - volatile __u16 command; - volatile unsigned long sub; - volatile unsigned long next; - __u32 dummy; -} USB_EP_Desc_t; - -struct virt_root_hub { - int devnum; - void *urb; - void *int_addr; - int send; - int interval; - int numports; - struct timer_list rh_int_timer; - volatile __u16 wPortChange_1; - volatile __u16 wPortChange_2; - volatile __u16 prev_wPortStatus_1; - volatile __u16 prev_wPortStatus_2; -}; - -struct etrax_usb_intr_traffic { - int sleeping; - int error; - struct wait_queue *wq; -}; - -typedef struct etrax_usb_hc { - struct usb_bus *bus; - struct virt_root_hub rh; - struct etrax_usb_intr_traffic intr; -} etrax_hc_t; - -typedef enum { - STARTED, - NOT_STARTED, - UNLINK, - TRANSFER_DONE, - WAITING_FOR_DESCR_INTR -} etrax_usb_urb_state_t; - - - -typedef struct etrax_usb_urb_priv { - /* The first_sb field is used for freeing all SB descriptors belonging - to an urb. The corresponding ep descriptor's sub pointer cannot be - used for this since the DMA advances the sub pointer as it processes - the sb list. */ - USB_SB_Desc_t *first_sb; - /* The last_sb field referes to the last SB descriptor that belongs to - this urb. This is important to know so we can free the SB descriptors - that ranges between first_sb and last_sb. */ - USB_SB_Desc_t *last_sb; - - /* The rx_offset field is used in ctrl and bulk traffic to keep track - of the offset in the urb's transfer_buffer where incoming data should be - copied to. */ - __u32 rx_offset; - - /* Counter used in isochronous transfers to keep track of the - number of packets received/transmitted. */ - __u32 isoc_packet_counter; - - /* This field is used to pass information about the urb's current state between - the various interrupt handlers (thus marked volatile). */ - volatile etrax_usb_urb_state_t urb_state; - - /* Connection between the submitted urb and ETRAX epid number */ - __u8 epid; - - /* The rx_data_list field is used for periodic traffic, to hold - received data for later processing in the the complete_urb functions, - where the data us copied to the urb's transfer_buffer. Basically, we - use this intermediate storage because we don't know when it's safe to - reuse the transfer_buffer (FIXME?). */ - struct list_head rx_data_list; -} etrax_urb_priv_t; - -/* This struct is for passing data from the top half to the bottom half. */ -typedef struct usb_interrupt_registers -{ - etrax_hc_t *hc; - __u32 r_usb_epid_attn; - __u8 r_usb_status; - __u16 r_usb_rh_port_status_1; - __u16 r_usb_rh_port_status_2; - __u32 r_usb_irq_mask_read; - __u32 r_usb_fm_number; - struct work_struct usb_bh; -} usb_interrupt_registers_t; - -/* This struct is for passing data from the isoc top half to the isoc bottom half. */ -typedef struct usb_isoc_complete_data -{ - struct urb *urb; - struct work_struct usb_bh; -} usb_isoc_complete_data_t; - -/* This struct holds data we get from the rx descriptors for DMA channel 9 - for periodic traffic (intr and isoc). */ -typedef struct rx_data -{ - void *data; - int length; - struct list_head list; -} rx_data_t; - -typedef struct urb_entry -{ - struct urb *urb; - struct list_head list; -} urb_entry_t; - -/* --------------------------------------------------------------------------- - Virtual Root HUB - ------------------------------------------------------------------------- */ -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -/* Our Vendor Specific feature */ -#define RH_REMOVE_EP 0x00 - - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 - -/* Field definitions for */ - -#define USB_IN_command__eol__BITNR 0 /* command macros */ -#define USB_IN_command__eol__WIDTH 1 -#define USB_IN_command__eol__no 0 -#define USB_IN_command__eol__yes 1 - -#define USB_IN_command__intr__BITNR 3 -#define USB_IN_command__intr__WIDTH 1 -#define USB_IN_command__intr__no 0 -#define USB_IN_command__intr__yes 1 - -#define USB_IN_status__eop__BITNR 1 /* status macros. */ -#define USB_IN_status__eop__WIDTH 1 -#define USB_IN_status__eop__no 0 -#define USB_IN_status__eop__yes 1 - -#define USB_IN_status__eot__BITNR 5 -#define USB_IN_status__eot__WIDTH 1 -#define USB_IN_status__eot__no 0 -#define USB_IN_status__eot__yes 1 - -#define USB_IN_status__error__BITNR 6 -#define USB_IN_status__error__WIDTH 1 -#define USB_IN_status__error__no 0 -#define USB_IN_status__error__yes 1 - -#define USB_IN_status__nodata__BITNR 7 -#define USB_IN_status__nodata__WIDTH 1 -#define USB_IN_status__nodata__no 0 -#define USB_IN_status__nodata__yes 1 - -#define USB_IN_status__epid__BITNR 8 -#define USB_IN_status__epid__WIDTH 5 - -#define USB_EP_command__eol__BITNR 0 -#define USB_EP_command__eol__WIDTH 1 -#define USB_EP_command__eol__no 0 -#define USB_EP_command__eol__yes 1 - -#define USB_EP_command__eof__BITNR 1 -#define USB_EP_command__eof__WIDTH 1 -#define USB_EP_command__eof__no 0 -#define USB_EP_command__eof__yes 1 - -#define USB_EP_command__intr__BITNR 3 -#define USB_EP_command__intr__WIDTH 1 -#define USB_EP_command__intr__no 0 -#define USB_EP_command__intr__yes 1 - -#define USB_EP_command__enable__BITNR 4 -#define USB_EP_command__enable__WIDTH 1 -#define USB_EP_command__enable__no 0 -#define USB_EP_command__enable__yes 1 - -#define USB_EP_command__hw_valid__BITNR 5 -#define USB_EP_command__hw_valid__WIDTH 1 -#define USB_EP_command__hw_valid__no 0 -#define USB_EP_command__hw_valid__yes 1 - -#define USB_EP_command__epid__BITNR 8 -#define USB_EP_command__epid__WIDTH 5 - -#define USB_SB_command__eol__BITNR 0 /* command macros. */ -#define USB_SB_command__eol__WIDTH 1 -#define USB_SB_command__eol__no 0 -#define USB_SB_command__eol__yes 1 - -#define USB_SB_command__eot__BITNR 1 -#define USB_SB_command__eot__WIDTH 1 -#define USB_SB_command__eot__no 0 -#define USB_SB_command__eot__yes 1 - -#define USB_SB_command__intr__BITNR 3 -#define USB_SB_command__intr__WIDTH 1 -#define USB_SB_command__intr__no 0 -#define USB_SB_command__intr__yes 1 - -#define USB_SB_command__tt__BITNR 4 -#define USB_SB_command__tt__WIDTH 2 -#define USB_SB_command__tt__zout 0 -#define USB_SB_command__tt__in 1 -#define USB_SB_command__tt__out 2 -#define USB_SB_command__tt__setup 3 - - -#define USB_SB_command__rem__BITNR 8 -#define USB_SB_command__rem__WIDTH 6 - -#define USB_SB_command__full__BITNR 6 -#define USB_SB_command__full__WIDTH 1 -#define USB_SB_command__full__no 0 -#define USB_SB_command__full__yes 1 - -#endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index b331ac4d0d62..79705609fd0c 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -20,10 +20,16 @@ /*-------------------------------------------------------------------------*/ +static int broken_suspend(struct usb_hcd *hcd) +{ + device_init_wakeup(&hcd->self.root_hub->dev, 0); + return 0; +} + /* AMD 756, for most chips (early revs), corrupts register * values on read ... so enable the vendor workaround. */ -static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd) +static int ohci_quirk_amd756(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -31,16 +37,14 @@ static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd) ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); /* also erratum 10 (suspend/resume issues) */ - device_init_wakeup(&hcd->self.root_hub->dev, 0); - - return 0; + return broken_suspend(hcd); } /* Apple's OHCI driver has a lot of bizarre workarounds * for this chip. Evidently control and bulk lists * can get confused. (B&W G3 models, and ...) */ -static int __devinit ohci_quirk_opti(struct usb_hcd *hcd) +static int ohci_quirk_opti(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -53,7 +57,7 @@ static int __devinit ohci_quirk_opti(struct usb_hcd *hcd) * identify the USB (fn2). This quirk might apply to more or * even all NSC stuff. */ -static int __devinit ohci_quirk_ns(struct usb_hcd *hcd) +static int ohci_quirk_ns(struct usb_hcd *hcd) { struct pci_dev *pdev = to_pci_dev(hcd->self.controller); struct pci_dev *b; @@ -75,7 +79,7 @@ static int __devinit ohci_quirk_ns(struct usb_hcd *hcd) * delays before control or bulk queues get re-activated * in finish_unlinks() */ -static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd) +static int ohci_quirk_zfmicro(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -88,7 +92,7 @@ static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd) /* Check for Toshiba SCC OHCI which has big endian registers * and little endian in memory data structures */ -static int __devinit ohci_quirk_toshiba_scc(struct usb_hcd *hcd) +static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci (hcd); @@ -129,6 +133,18 @@ static const struct pci_device_id ohci_pci_quirks[] = { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6), .driver_data = (unsigned long)ohci_quirk_toshiba_scc, }, + { + /* Toshiba portege 4000 */ + .vendor = PCI_VENDOR_ID_AL, + .device = 0x5237, + .subvendor = PCI_VENDOR_ID_TOSHIBA_2, + .subdevice = 0x0004, + .driver_data = (unsigned long) broken_suspend, + }, + { + PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152), + .driver_data = (unsigned long) broken_suspend, + }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 19a0cc02b9a2..4aed305982ec 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -123,10 +123,14 @@ static struct uhci_td *uhci_alloc_td(struct uhci_hcd *uhci) static void uhci_free_td(struct uhci_hcd *uhci, struct uhci_td *td) { - if (!list_empty(&td->list)) + if (!list_empty(&td->list)) { dev_warn(uhci_dev(uhci), "td %p still in list!\n", td); - if (!list_empty(&td->fl_list)) + WARN_ON(1); + } + if (!list_empty(&td->fl_list)) { dev_warn(uhci_dev(uhci), "td %p still in fl_list!\n", td); + WARN_ON(1); + } dma_pool_free(uhci->td_pool, td, td->dma_handle); } @@ -291,8 +295,10 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci, static void uhci_free_qh(struct uhci_hcd *uhci, struct uhci_qh *qh) { WARN_ON(qh->state != QH_STATE_IDLE && qh->udev); - if (!list_empty(&qh->queue)) + if (!list_empty(&qh->queue)) { dev_warn(uhci_dev(uhci), "qh %p list not empty!\n", qh); + WARN_ON(1); + } list_del(&qh->node); if (qh->udev) { @@ -740,9 +746,11 @@ static void uhci_free_urb_priv(struct uhci_hcd *uhci, { struct uhci_td *td, *tmp; - if (!list_empty(&urbp->node)) + if (!list_empty(&urbp->node)) { dev_warn(uhci_dev(uhci), "urb %p still on QH's list!\n", urbp->urb); + WARN_ON(1); + } list_for_each_entry_safe(td, tmp, &urbp->td_list, list) { uhci_remove_td_from_urbp(td); diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c index 83f1f79db7c7..6459be90599c 100644 --- a/drivers/usb/input/ati_remote2.c +++ b/drivers/usb/input/ati_remote2.c @@ -2,6 +2,7 @@ * ati_remote2 - ATI/Philips USB RF remote driver * * Copyright (C) 2005 Ville Syrjala <syrjala@sci.fi> + * Copyright (C) 2007 Peter Stokes <linux@dadeos.freeserve.co.uk> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 @@ -11,13 +12,29 @@ #include <linux/usb/input.h> #define DRIVER_DESC "ATI/Philips USB RF remote driver" -#define DRIVER_VERSION "0.1" +#define DRIVER_VERSION "0.2" MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>"); MODULE_LICENSE("GPL"); +/* + * ATI Remote Wonder II Channel Configuration + * + * The remote control can by assigned one of sixteen "channels" in order to facilitate + * the use of multiple remote controls within range of each other. + * A remote's "channel" may be altered by pressing and holding the "PC" button for + * approximately 3 seconds, after which the button will slowly flash the count of the + * currently configured "channel", using the numeric keypad enter a number between 1 and + * 16 and then the "PC" button again, the button will slowly flash the count of the + * newly configured "channel". + */ + +static unsigned int channel_mask = 0xFFFF; +module_param(channel_mask, uint, 0644); +MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); + static unsigned int mode_mask = 0x1F; module_param(mode_mask, uint, 0644); MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); @@ -146,15 +163,23 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) { struct input_dev *idev = ar2->idev; u8 *data = ar2->buf[0]; + int channel, mode; + + channel = data[0] >> 4; + + if (!((1 << channel) & channel_mask)) + return; - if (data[0] > 4) { + mode = data[0] & 0x0F; + + if (mode > 4) { dev_err(&ar2->intf[0]->dev, "Unknown mode byte (%02x %02x %02x %02x)\n", data[3], data[2], data[1], data[0]); return; } - if (!((1 << data[0]) & mode_mask)) + if (!((1 << mode) & mode_mask)) return; input_event(idev, EV_REL, REL_X, (s8) data[1]); @@ -177,9 +202,16 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) { struct input_dev *idev = ar2->idev; u8 *data = ar2->buf[1]; - int hw_code, index; + int channel, mode, hw_code, index; + + channel = data[0] >> 4; + + if (!((1 << channel) & channel_mask)) + return; - if (data[0] > 4) { + mode = data[0] & 0x0F; + + if (mode > 4) { dev_err(&ar2->intf[1]->dev, "Unknown mode byte (%02x %02x %02x %02x)\n", data[3], data[2], data[1], data[0]); @@ -199,16 +231,16 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) * events for the mouse pad so we filter out any subsequent * events from the same mode key. */ - if (ar2->mode == data[0]) + if (ar2->mode == mode) return; if (data[1] == 0) - ar2->mode = data[0]; + ar2->mode = mode; - hw_code |= data[0] << 8; + hw_code |= mode << 8; } - if (!((1 << data[0]) & mode_mask)) + if (!((1 << mode) & mode_mask)) return; index = ati_remote2_lookup(hw_code); @@ -379,6 +411,41 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) } } +static int ati_remote2_setup(struct ati_remote2 *ar2) +{ + int r, i, channel; + + /* + * Configure receiver to only accept input from remote "channel" + * channel == 0 -> Accept input from any remote channel + * channel == 1 -> Only accept input from remote channel 1 + * channel == 2 -> Only accept input from remote channel 2 + * ... + * channel == 16 -> Only accept input from remote channel 16 + */ + + channel = 0; + for (i = 0; i < 16; i++) { + if ((1 << i) & channel_mask) { + if (!(~(1 << i) & 0xFFFF & channel_mask)) + channel = i + 1; + break; + } + } + + r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0), + 0x20, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, + channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT); + if (r) { + dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n", + __FUNCTION__, r); + return r; + } + + return 0; +} + static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); @@ -409,6 +476,10 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d if (r) goto fail2; + r = ati_remote2_setup(ar2); + if (r) + goto fail2; + usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c index 203cdc1bbba4..ae756e0afc99 100644 --- a/drivers/usb/input/gtco.c +++ b/drivers/usb/input/gtco.c @@ -1047,13 +1047,10 @@ static void gtco_disconnect(struct usb_interface *interface) /* Grab private device ptr */ struct gtco *device = usb_get_intfdata (interface); - struct input_dev *inputdev; - - inputdev = device->inputdevice; /* Now reverse all the registration stuff */ if (device) { - input_unregister_device(inputdev); + input_unregister_device(device->inputdevice); usb_kill_urb(device->urbinfo); usb_free_urb(device->urbinfo); usb_buffer_free(device->usbdev, REPORT_MAX_SIZE, diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 75bfab95ab3c..77145f9db043 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -285,23 +285,24 @@ static int adu_open(struct inode *inode, struct file *file) /* save device in the file's private structure */ file->private_data = dev; - /* initialize in direction */ - dev->read_buffer_length = 0; - - /* fixup first read by having urb waiting for it */ - usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, - usb_rcvintpipe(dev->udev, - dev->interrupt_in_endpoint->bEndpointAddress), - dev->interrupt_in_buffer, - le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), - adu_interrupt_in_callback, dev, - dev->interrupt_in_endpoint->bInterval); - /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ - dev->read_urb_finished = 0; - usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); - /* we ignore failure */ - /* end of fixup for first read */ + if (dev->open_count == 1) { + /* initialize in direction */ + dev->read_buffer_length = 0; + /* fixup first read by having urb waiting for it */ + usb_fill_int_urb(dev->interrupt_in_urb,dev->udev, + usb_rcvintpipe(dev->udev, + dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + le16_to_cpu(dev->interrupt_in_endpoint->wMaxPacketSize), + adu_interrupt_in_callback, dev, + dev->interrupt_in_endpoint->bInterval); + /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */ + dev->read_urb_finished = 0; + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + if (retval) + --dev->open_count; + } up(&dev->sem); exit_no_device: @@ -469,7 +470,7 @@ static ssize_t adu_read(struct file *file, __user char *buffer, size_t count, adu_interrupt_in_callback, dev, dev->interrupt_in_endpoint->bInterval); - retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); if (!retval) { spin_unlock_irqrestore(&dev->buflock, flags); dbg(2," %s : submitted OK", __FUNCTION__); @@ -539,7 +540,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, size_t bytes_written = 0; size_t bytes_to_write; size_t buffer_size; - int retval = 0; + int retval; int timeout = 0; dbg(2," %s : enter, count = %Zd", __FUNCTION__, count); @@ -547,7 +548,9 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, dev = file->private_data; /* lock this object */ - down_interruptible(&dev->sem); + retval = down_interruptible(&dev->sem); + if (retval) + goto exit_nolock; /* verify that the device wasn't unplugged */ if (dev->udev == NULL || dev->minor == 0) { @@ -575,7 +578,11 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, } up(&dev->sem); timeout = interruptible_sleep_on_timeout(&dev->write_wait, timeout); - down_interruptible(&dev->sem); + retval = down_interruptible(&dev->sem); + if (retval) { + retval = bytes_written ? bytes_written : retval; + goto exit_nolock; + } if (timeout > 0) { break; } @@ -637,6 +644,7 @@ static ssize_t adu_write(struct file *file, const __user char *buffer, exit: /* unlock the device */ up(&dev->sem); +exit_nolock: dbg(2," %s : leave, return value %d", __FUNCTION__, retval); diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c index b63b5f34b2aa..d721380b242d 100644 --- a/drivers/usb/misc/cypress_cy7c63.c +++ b/drivers/usb/misc/cypress_cy7c63.c @@ -246,11 +246,13 @@ static void cypress_disconnect(struct usb_interface *interface) struct cypress *dev; dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); /* remove device attribute files */ device_remove_file(&interface->dev, &dev_attr_port0); device_remove_file(&interface->dev, &dev_attr_port1); + /* the intfdata can be set to NULL only after the + * device files have been removed */ + usb_set_intfdata(interface, NULL); usb_put_dev(dev->udev); diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index bc3327e3dd78..e2172e5cf152 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -2304,7 +2304,6 @@ static int ftdi_elan_checkingPCI(struct usb_ftdi *ftdi) #define OHCI_QUIRK_SUPERIO 0x02 #define OHCI_QUIRK_INITRESET 0x04 #define OHCI_BIG_ENDIAN 0x08 -#define OHCI_QUIRK_ZFMICRO 0x10 #define OHCI_CONTROL_INIT OHCI_CTRL_CBSR #define OHCI_INTR_INIT (OHCI_INTR_MIE | OHCI_INTR_UE | OHCI_INTR_RD | \ OHCI_INTR_WDH) @@ -2910,24 +2909,28 @@ static int __init ftdi_elan_init(void) INIT_LIST_HEAD(&ftdi_static_list); status_queue = create_singlethread_workqueue("ftdi-status-control"); if (!status_queue) - goto err1; + goto err_status_queue; command_queue = create_singlethread_workqueue("ftdi-command-engine"); if (!command_queue) - goto err2; + goto err_command_queue; respond_queue = create_singlethread_workqueue("ftdi-respond-engine"); if (!respond_queue) - goto err3; + goto err_respond_queue; result = usb_register(&ftdi_elan_driver); - if (result) + if (result) { + destroy_workqueue(status_queue); + destroy_workqueue(command_queue); + destroy_workqueue(respond_queue); printk(KERN_ERR "usb_register failed. Error number %d\n", result); + } return result; - err3: + err_respond_queue: destroy_workqueue(command_queue); - err2: + err_command_queue: destroy_workqueue(status_queue); - err1: + err_status_queue: printk(KERN_ERR "%s couldn't create workqueue\n", ftdi_elan_driver.name); return -ENOMEM; } diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index d69665c8de02..fc51207b71b8 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -118,7 +118,7 @@ static int usb_get_report(struct usb_device *dev, USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, (type << 8) + id, inter->desc.bInterfaceNumber, buf, size, - GET_TIMEOUT); + GET_TIMEOUT*HZ); } //#endif @@ -133,7 +133,7 @@ static int usb_set_report(struct usb_interface *intf, unsigned char type, USB_TYPE_CLASS | USB_RECIP_INTERFACE, (type << 8) + id, intf->cur_altsetting->desc.bInterfaceNumber, buf, - size, 1); + size, HZ); } /*---------------------*/ @@ -417,14 +417,14 @@ static ssize_t iowarrior_write(struct file *file, if (!int_out_urb) { retval = -ENOMEM; dbg("%s Unable to allocate urb ", __func__); - goto error; + goto error_no_urb; } buf = usb_buffer_alloc(dev->udev, dev->report_size, GFP_KERNEL, &int_out_urb->transfer_dma); if (!buf) { retval = -ENOMEM; dbg("%s Unable to allocate buffer ", __func__); - goto error; + goto error_no_buffer; } usb_fill_int_urb(int_out_urb, dev->udev, usb_sndintpipe(dev->udev, @@ -459,7 +459,9 @@ static ssize_t iowarrior_write(struct file *file, error: usb_buffer_free(dev->udev, dev->report_size, buf, int_out_urb->transfer_dma); +error_no_buffer: usb_free_urb(int_out_urb); +error_no_urb: atomic_dec(&dev->write_busy); wake_up_interruptible(&dev->write_wait); exit: @@ -748,7 +750,6 @@ static int iowarrior_probe(struct usb_interface *interface, struct usb_endpoint_descriptor *endpoint; int i; int retval = -ENOMEM; - int idele = 0; /* allocate memory for our device state and intialize it */ dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL); @@ -824,11 +825,10 @@ static int iowarrior_probe(struct usb_interface *interface, /* Set the idle timeout to 0, if this is interface 0 */ if (dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) { - idele = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), - 0x0A, - USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, - 0, NULL, 0, USB_CTRL_SET_TIMEOUT); - dbg("idele = %d", idele); + usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0x0A, + USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, + 0, NULL, 0, USB_CTRL_SET_TIMEOUT); } /* allow device read and ioctl */ dev->present = 1; diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 788a11e6772f..11555bde655b 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -62,6 +62,8 @@ #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 +#define USB_VENDOR_ID_MICROCHIP 0x04d8 +#define USB_DEVICE_ID_PICDEM 0x000c #ifdef CONFIG_USB_DYNAMIC_MINORS #define USB_LD_MINOR_BASE 0 @@ -89,6 +91,7 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, + { USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICDEM) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, ld_usb_table); diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index ada2ebc464ae..887ef953f3d8 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -47,6 +47,7 @@ struct usb_lcd { #define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) static struct usb_driver lcd_driver; +static DEFINE_MUTEX(usb_lcd_open_mutex); static void lcd_delete(struct kref *kref) @@ -68,6 +69,7 @@ static int lcd_open(struct inode *inode, struct file *file) subminor = iminor(inode); + mutex_lock(&usb_lcd_open_mutex); interface = usb_find_interface(&lcd_driver, subminor); if (!interface) { err ("USBLCD: %s - error, can't find device for minor %d", @@ -89,6 +91,7 @@ static int lcd_open(struct inode *inode, struct file *file) file->private_data = dev; exit: + mutex_unlock(&usb_lcd_open_mutex); return retval; } @@ -347,7 +350,7 @@ static void lcd_disconnect(struct usb_interface *interface) int minor = interface->minor; /* prevent skel_open() from racing skel_disconnect() */ - lock_kernel(); + mutex_lock(&usb_lcd_open_mutex); dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); @@ -355,7 +358,7 @@ static void lcd_disconnect(struct usb_interface *interface) /* give back our minor */ usb_deregister_dev(interface, &lcd_class); - unlock_kernel(); + mutex_unlock(&usb_lcd_open_mutex); /* decrement our usage count */ kref_put(&dev->kref, lcd_delete); diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index b2bedd974ac3..0af11a66207c 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -356,8 +356,10 @@ static inline char mon_bin_get_setup(unsigned char *setupb, if (!usb_pipecontrol(urb->pipe) || ev_type != 'S') return '-'; - if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP) + if (urb->dev->bus->uses_dma && + (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) { return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN); + } if (urb->setup_packet == NULL) return 'Z'; @@ -369,7 +371,8 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp, unsigned int offset, struct urb *urb, unsigned int length) { - if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) { + if (urb->dev->bus->uses_dma && + (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { mon_dmapeek_vec(rp, offset, urb->transfer_dma, length); return 0; } @@ -440,7 +443,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, /* We use the fact that usb_pipein() returns 0x80 */ ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe); ep->devnum = usb_pipedevice(urb->pipe); - ep->busnum = rp->r.m_bus->u_bus->busnum; + ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; ep->ts_sec = ts.tv_sec; ep->ts_usec = ts.tv_usec; @@ -500,7 +503,7 @@ static void mon_bin_error(void *data, struct urb *urb, int error) /* We use the fact that usb_pipein() returns 0x80 */ ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe); ep->devnum = usb_pipedevice(urb->pipe); - ep->busnum = rp->r.m_bus->u_bus->busnum; + ep->busnum = urb->dev->bus->busnum; ep->id = (unsigned long) urb; ep->status = error; @@ -515,7 +518,6 @@ static void mon_bin_error(void *data, struct urb *urb, int error) static int mon_bin_open(struct inode *inode, struct file *file) { struct mon_bus *mbus; - struct usb_bus *ubus; struct mon_reader_bin *rp; size_t size; int rc; @@ -525,7 +527,7 @@ static int mon_bin_open(struct inode *inode, struct file *file) mutex_unlock(&mon_lock); return -ENODEV; } - if ((ubus = mbus->u_bus) == NULL) { + if (mbus != &mon_bus0 && mbus->u_bus == NULL) { printk(KERN_ERR TAG ": consistency error on open\n"); mutex_unlock(&mon_lock); return -ENODEV; diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index c9739e7b35e5..8a1df2c9c73e 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -16,8 +16,6 @@ #include "usb_mon.h" #include "../core/hcd.h" -static void mon_submit(struct usb_bus *ubus, struct urb *urb); -static void mon_complete(struct usb_bus *ubus, struct urb *urb); static void mon_stop(struct mon_bus *mbus); static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus); static void mon_bus_drop(struct kref *r); @@ -25,6 +23,7 @@ static void mon_bus_init(struct usb_bus *ubus); DEFINE_MUTEX(mon_lock); +struct mon_bus mon_bus0; /* Pseudo bus meaning "all buses" */ static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */ /* @@ -35,22 +34,19 @@ static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */ void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r) { unsigned long flags; - struct usb_bus *ubus; + struct list_head *p; spin_lock_irqsave(&mbus->lock, flags); if (mbus->nreaders == 0) { - ubus = mbus->u_bus; - if (ubus->monitored) { - /* - * Something is really broken, refuse to go on and - * possibly corrupt ops pointers or worse. - */ - printk(KERN_ERR TAG ": bus %d is already monitored\n", - ubus->busnum); - spin_unlock_irqrestore(&mbus->lock, flags); - return; + if (mbus == &mon_bus0) { + list_for_each (p, &mon_buses) { + struct mon_bus *m1; + m1 = list_entry(p, struct mon_bus, bus_link); + m1->u_bus->monitored = 1; + } + } else { + mbus->u_bus->monitored = 1; } - ubus->monitored = 1; } mbus->nreaders++; list_add_tail(&r->r_link, &mbus->r_list); @@ -80,77 +76,79 @@ void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r) /* */ -static void mon_submit(struct usb_bus *ubus, struct urb *urb) +static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb) { - struct mon_bus *mbus; unsigned long flags; struct list_head *pos; struct mon_reader *r; - mbus = ubus->mon_bus; - if (mbus == NULL) - goto out_unlocked; - spin_lock_irqsave(&mbus->lock, flags); - if (mbus->nreaders == 0) - goto out_locked; - mbus->cnt_events++; list_for_each (pos, &mbus->r_list) { r = list_entry(pos, struct mon_reader, r_link); r->rnf_submit(r->r_data, urb); } - spin_unlock_irqrestore(&mbus->lock, flags); return; +} -out_locked: - spin_unlock_irqrestore(&mbus->lock, flags); -out_unlocked: - return; +static void mon_submit(struct usb_bus *ubus, struct urb *urb) +{ + struct mon_bus *mbus; + + if ((mbus = ubus->mon_bus) != NULL) + mon_bus_submit(mbus, urb); + mon_bus_submit(&mon_bus0, urb); } /* */ -static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) +static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int error) { - struct mon_bus *mbus; unsigned long flags; struct list_head *pos; struct mon_reader *r; - mbus = ubus->mon_bus; - if (mbus == NULL) - goto out_unlocked; - spin_lock_irqsave(&mbus->lock, flags); - if (mbus->nreaders == 0) - goto out_locked; - mbus->cnt_events++; list_for_each (pos, &mbus->r_list) { r = list_entry(pos, struct mon_reader, r_link); r->rnf_error(r->r_data, urb, error); } - spin_unlock_irqrestore(&mbus->lock, flags); return; +} -out_locked: - spin_unlock_irqrestore(&mbus->lock, flags); -out_unlocked: - return; +static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) +{ + struct mon_bus *mbus; + + if ((mbus = ubus->mon_bus) != NULL) + mon_bus_submit_error(mbus, urb, error); + mon_bus_submit_error(&mon_bus0, urb, error); } /* */ -static void mon_complete(struct usb_bus *ubus, struct urb *urb) +static void mon_bus_complete(struct mon_bus *mbus, struct urb *urb) { - struct mon_bus *mbus; unsigned long flags; struct list_head *pos; struct mon_reader *r; + spin_lock_irqsave(&mbus->lock, flags); + mbus->cnt_events++; + list_for_each (pos, &mbus->r_list) { + r = list_entry(pos, struct mon_reader, r_link); + r->rnf_complete(r->r_data, urb); + } + spin_unlock_irqrestore(&mbus->lock, flags); +} + +static void mon_complete(struct usb_bus *ubus, struct urb *urb) +{ + struct mon_bus *mbus; + mbus = ubus->mon_bus; if (mbus == NULL) { /* @@ -162,13 +160,8 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb) return; } - spin_lock_irqsave(&mbus->lock, flags); - mbus->cnt_events++; - list_for_each (pos, &mbus->r_list) { - r = list_entry(pos, struct mon_reader, r_link); - r->rnf_complete(r->r_data, urb); - } - spin_unlock_irqrestore(&mbus->lock, flags); + mon_bus_complete(mbus, urb); + mon_bus_complete(&mon_bus0, urb); } /* int (*unlink_urb) (struct urb *urb, int status); */ @@ -179,14 +172,26 @@ static void mon_complete(struct usb_bus *ubus, struct urb *urb) static void mon_stop(struct mon_bus *mbus) { struct usb_bus *ubus = mbus->u_bus; + struct list_head *p; - /* - * A stop can be called for a dissolved mon_bus in case of - * a reader staying across an rmmod foo_hcd. - */ - if (ubus != NULL) { - ubus->monitored = 0; - mb(); + if (mbus == &mon_bus0) { + list_for_each (p, &mon_buses) { + mbus = list_entry(p, struct mon_bus, bus_link); + /* + * We do not change nreaders here, so rely on mon_lock. + */ + if (mbus->nreaders == 0 && (ubus = mbus->u_bus) != NULL) + ubus->monitored = 0; + } + } else { + /* + * A stop can be called for a dissolved mon_bus in case of + * a reader staying across an rmmod foo_hcd, so test ->u_bus. + */ + if (mon_bus0.nreaders == 0 && (ubus = mbus->u_bus) != NULL) { + ubus->monitored = 0; + mb(); + } } } @@ -199,6 +204,10 @@ static void mon_stop(struct mon_bus *mbus) static void mon_bus_add(struct usb_bus *ubus) { mon_bus_init(ubus); + mutex_lock(&mon_lock); + if (mon_bus0.nreaders != 0) + ubus->monitored = 1; + mutex_unlock(&mon_lock); } /* @@ -250,12 +259,7 @@ static struct usb_mon_operations mon_ops_0 = { static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus) { - /* - * Never happens, but... - */ if (ubus->monitored) { - printk(KERN_ERR TAG ": bus %d is dissolved while monitored\n", - ubus->busnum); ubus->monitored = 0; mb(); } @@ -263,6 +267,8 @@ static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus) ubus->mon_bus = NULL; mbus->u_bus = NULL; mb(); + + /* We want synchronize_irq() here, but that needs an argument. */ } /* @@ -295,9 +301,8 @@ static void mon_bus_init(struct usb_bus *ubus) */ mbus->u_bus = ubus; ubus->mon_bus = mbus; - mbus->uses_dma = ubus->uses_dma; - mbus->text_inited = mon_text_add(mbus, ubus); + mbus->text_inited = mon_text_add(mbus, ubus->busnum); // mon_bin_add(...) mutex_lock(&mon_lock); @@ -309,6 +314,18 @@ err_alloc: return; } +static void mon_bus0_init(void) +{ + struct mon_bus *mbus = &mon_bus0; + + kref_init(&mbus->ref); + spin_lock_init(&mbus->lock); + INIT_LIST_HEAD(&mbus->r_list); + + mbus->text_inited = mon_text_add(mbus, 0); + // mbus->bin_inited = mon_bin_add(mbus, 0); +} + /* * Search a USB bus by number. Notice that USB bus numbers start from one, * which we may later use to identify "all" with zero. @@ -322,6 +339,9 @@ struct mon_bus *mon_bus_lookup(unsigned int num) struct list_head *p; struct mon_bus *mbus; + if (num == 0) { + return &mon_bus0; + } list_for_each (p, &mon_buses) { mbus = list_entry(p, struct mon_bus, bus_link); if (mbus->u_bus->busnum == num) { @@ -341,6 +361,8 @@ static int __init mon_init(void) if ((rc = mon_bin_init()) != 0) goto err_bin; + mon_bus0_init(); + if (usb_mon_register(&mon_ops_0) != 0) { printk(KERN_NOTICE TAG ": unable to register with the core\n"); rc = -ENODEV; @@ -374,6 +396,7 @@ static void __exit mon_exit(void) usb_mon_deregister(); mutex_lock(&mon_lock); + while (!list_empty(&mon_buses)) { p = mon_buses.next; mbus = list_entry(p, struct mon_bus, bus_link); @@ -397,6 +420,11 @@ static void __exit mon_exit(void) mon_dissolve(mbus, mbus->u_bus); kref_put(&mbus->ref, mon_bus_drop); } + + mbus = &mon_bus0; + if (mbus->text_inited) + mon_text_del(mbus); + mutex_unlock(&mon_lock); mon_text_exit(); diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index 494ee3b9a226..ec0cc51e39ac 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -31,9 +31,21 @@ * to a local DoS. But we have to keep to root in order to prevent * password sniffing from HID devices. */ -#define EVENT_MAX (2*PAGE_SIZE / sizeof(struct mon_event_text)) +#define EVENT_MAX (4*PAGE_SIZE / sizeof(struct mon_event_text)) -#define PRINTF_DFL 160 +/* + * Potentially unlimited number; we limit it for similar allocations. + * The usbfs limits this to 128, but we're not quite as generous. + */ +#define ISODESC_MAX 5 + +#define PRINTF_DFL 250 /* with 5 ISOs segs */ + +struct mon_iso_desc { + int status; + unsigned int offset; + unsigned int length; /* Unsigned here, signed in URB. Historic. */ +}; struct mon_event_text { struct list_head e_link; @@ -41,10 +53,16 @@ struct mon_event_text { unsigned int pipe; /* Pipe */ unsigned long id; /* From pointer, most of the time */ unsigned int tstamp; + int busnum; int length; /* Depends on type: xfer length or act length */ int status; + int interval; + int start_frame; + int error_count; char setup_flag; char data_flag; + int numdesc; /* Full number */ + struct mon_iso_desc isodesc[ISODESC_MAX]; unsigned char setup[SETUP_MAX]; unsigned char data[DATA_MAX]; }; @@ -68,6 +86,28 @@ static struct dentry *mon_dir; /* Usually /sys/kernel/debug/usbmon */ static void mon_text_ctor(void *, struct kmem_cache *, unsigned long); +struct mon_text_ptr { + int cnt, limit; + char *pbuf; +}; + +static struct mon_event_text * + mon_text_read_wait(struct mon_reader_text *rp, struct file *file); +static void mon_text_read_head_t(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_head_u(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_statset(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_intstat(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_isostat(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_isodesc(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); +static void mon_text_read_data(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep); + /* * mon_text_submit * mon_text_complete @@ -84,8 +124,10 @@ static inline char mon_text_get_setup(struct mon_event_text *ep, if (!usb_pipecontrol(urb->pipe) || ev_type != 'S') return '-'; - if (mbus->uses_dma && (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) + if (urb->dev->bus->uses_dma && + (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)) { return mon_dmapeek(ep->setup, urb->setup_dma, SETUP_MAX); + } if (urb->setup_packet == NULL) return 'Z'; /* '0' would be not as pretty. */ @@ -104,10 +146,10 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, len = DATA_MAX; if (usb_pipein(pipe)) { - if (ev_type == 'S') + if (ev_type != 'C') return '<'; } else { - if (ev_type == 'C') + if (ev_type != 'S') return '>'; } @@ -120,8 +162,10 @@ static inline char mon_text_get_data(struct mon_event_text *ep, struct urb *urb, * contain non-NULL garbage in case the upper level promised to * set DMA for the HCD. */ - if (mbus->uses_dma && (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) + if (urb->dev->bus->uses_dma && + (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) { return mon_dmapeek(ep->data, urb->transfer_dma, len); + } if (urb->transfer_buffer == NULL) return 'Z'; /* '0' would be not as pretty. */ @@ -146,6 +190,9 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb, { struct mon_event_text *ep; unsigned int stamp; + struct usb_iso_packet_descriptor *fp; + struct mon_iso_desc *dp; + int i, ndesc; stamp = mon_get_timestamp(); @@ -158,12 +205,36 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb, ep->type = ev_type; ep->pipe = urb->pipe; ep->id = (unsigned long) urb; + ep->busnum = urb->dev->bus->busnum; ep->tstamp = stamp; ep->length = (ev_type == 'S') ? urb->transfer_buffer_length : urb->actual_length; /* Collecting status makes debugging sense for submits, too */ ep->status = urb->status; + if (usb_pipeint(urb->pipe)) { + ep->interval = urb->interval; + } else if (usb_pipeisoc(urb->pipe)) { + ep->interval = urb->interval; + ep->start_frame = urb->start_frame; + ep->error_count = urb->error_count; + } + ep->numdesc = urb->number_of_packets; + if (usb_pipeisoc(urb->pipe) && urb->number_of_packets > 0) { + if ((ndesc = urb->number_of_packets) > ISODESC_MAX) + ndesc = ISODESC_MAX; + fp = urb->iso_frame_desc; + dp = ep->isodesc; + for (i = 0; i < ndesc; i++) { + dp->status = fp->status; + dp->offset = fp->offset; + dp->length = (ev_type == 'S') ? + fp->length : fp->actual_length; + fp++; + dp++; + } + } + ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus); ep->data_flag = mon_text_get_data(ep, urb, ep->length, ev_type, rp->r.m_bus); @@ -199,6 +270,7 @@ static void mon_text_error(void *data, struct urb *urb, int error) ep->type = 'E'; ep->pipe = urb->pipe; ep->id = (unsigned long) urb; + ep->busnum = 0; ep->tstamp = 0; ep->length = 0; ep->status = error; @@ -237,13 +309,11 @@ static struct mon_event_text *mon_text_fetch(struct mon_reader_text *rp, static int mon_text_open(struct inode *inode, struct file *file) { struct mon_bus *mbus; - struct usb_bus *ubus; struct mon_reader_text *rp; int rc; mutex_lock(&mon_lock); mbus = inode->i_private; - ubus = mbus->u_bus; rp = kzalloc(sizeof(struct mon_reader_text), GFP_KERNEL); if (rp == NULL) { @@ -267,8 +337,7 @@ static int mon_text_open(struct inode *inode, struct file *file) rp->r.rnf_error = mon_text_error; rp->r.rnf_complete = mon_text_complete; - snprintf(rp->slab_name, SLAB_NAME_SZ, "mon%dt_%lx", ubus->busnum, - (long)rp); + snprintf(rp->slab_name, SLAB_NAME_SZ, "mon_text_%p", rp); rp->e_slab = kmem_cache_create(rp->slab_name, sizeof(struct mon_event_text), sizeof(long), 0, mon_text_ctor, NULL); @@ -300,17 +369,75 @@ err_alloc: * dd if=/dbg/usbmon/0t bs=10 * Also, we do not allow seeks and do not bother advancing the offset. */ -static ssize_t mon_text_read(struct file *file, char __user *buf, +static ssize_t mon_text_read_t(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { struct mon_reader_text *rp = file->private_data; + struct mon_event_text *ep; + struct mon_text_ptr ptr; + + if (IS_ERR(ep = mon_text_read_wait(rp, file))) + return PTR_ERR(ep); + mutex_lock(&rp->printf_lock); + ptr.cnt = 0; + ptr.pbuf = rp->printf_buf; + ptr.limit = rp->printf_size; + + mon_text_read_head_t(rp, &ptr, ep); + mon_text_read_statset(rp, &ptr, ep); + ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt, + " %d", ep->length); + mon_text_read_data(rp, &ptr, ep); + + if (copy_to_user(buf, rp->printf_buf, ptr.cnt)) + ptr.cnt = -EFAULT; + mutex_unlock(&rp->printf_lock); + kmem_cache_free(rp->e_slab, ep); + return ptr.cnt; +} + +static ssize_t mon_text_read_u(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct mon_reader_text *rp = file->private_data; + struct mon_event_text *ep; + struct mon_text_ptr ptr; + + if (IS_ERR(ep = mon_text_read_wait(rp, file))) + return PTR_ERR(ep); + mutex_lock(&rp->printf_lock); + ptr.cnt = 0; + ptr.pbuf = rp->printf_buf; + ptr.limit = rp->printf_size; + + mon_text_read_head_u(rp, &ptr, ep); + if (ep->type == 'E') { + mon_text_read_statset(rp, &ptr, ep); + } else if (usb_pipeisoc(ep->pipe)) { + mon_text_read_isostat(rp, &ptr, ep); + mon_text_read_isodesc(rp, &ptr, ep); + } else if (usb_pipeint(ep->pipe)) { + mon_text_read_intstat(rp, &ptr, ep); + } else { + mon_text_read_statset(rp, &ptr, ep); + } + ptr.cnt += snprintf(ptr.pbuf + ptr.cnt, ptr.limit - ptr.cnt, + " %d", ep->length); + mon_text_read_data(rp, &ptr, ep); + + if (copy_to_user(buf, rp->printf_buf, ptr.cnt)) + ptr.cnt = -EFAULT; + mutex_unlock(&rp->printf_lock); + kmem_cache_free(rp->e_slab, ep); + return ptr.cnt; +} + +static struct mon_event_text *mon_text_read_wait(struct mon_reader_text *rp, + struct file *file) +{ struct mon_bus *mbus = rp->r.m_bus; DECLARE_WAITQUEUE(waita, current); struct mon_event_text *ep; - int cnt, limit; - char *pbuf; - char udir, utype; - int data_len, i; add_wait_queue(&rp->wait, &waita); set_current_state(TASK_INTERRUPTIBLE); @@ -318,7 +445,7 @@ static ssize_t mon_text_read(struct file *file, char __user *buf, if (file->f_flags & O_NONBLOCK) { set_current_state(TASK_RUNNING); remove_wait_queue(&rp->wait, &waita); - return -EWOULDBLOCK; /* Same as EAGAIN in Linux */ + return ERR_PTR(-EWOULDBLOCK); } /* * We do not count nwaiters, because ->release is supposed @@ -327,17 +454,19 @@ static ssize_t mon_text_read(struct file *file, char __user *buf, schedule(); if (signal_pending(current)) { remove_wait_queue(&rp->wait, &waita); - return -EINTR; + return ERR_PTR(-EINTR); } set_current_state(TASK_INTERRUPTIBLE); } set_current_state(TASK_RUNNING); remove_wait_queue(&rp->wait, &waita); + return ep; +} - mutex_lock(&rp->printf_lock); - cnt = 0; - pbuf = rp->printf_buf; - limit = rp->printf_size; +static void mon_text_read_head_t(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + char udir, utype; udir = usb_pipein(ep->pipe) ? 'i' : 'o'; switch (usb_pipetype(ep->pipe)) { @@ -346,13 +475,38 @@ static ssize_t mon_text_read(struct file *file, char __user *buf, case PIPE_CONTROL: utype = 'C'; break; default: /* PIPE_BULK */ utype = 'B'; } - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, "%lx %u %c %c%c:%03u:%02u", ep->id, ep->tstamp, ep->type, - utype, udir, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe)); + utype, udir, + usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe)); +} + +static void mon_text_read_head_u(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + char udir, utype; + + udir = usb_pipein(ep->pipe) ? 'i' : 'o'; + switch (usb_pipetype(ep->pipe)) { + case PIPE_ISOCHRONOUS: utype = 'Z'; break; + case PIPE_INTERRUPT: utype = 'I'; break; + case PIPE_CONTROL: utype = 'C'; break; + default: /* PIPE_BULK */ utype = 'B'; + } + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + "%lx %u %c %c%c:%d:%03u:%u", + ep->id, ep->tstamp, ep->type, + utype, udir, + ep->busnum, usb_pipedevice(ep->pipe), usb_pipeendpoint(ep->pipe)); +} + +static void mon_text_read_statset(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ if (ep->setup_flag == 0) { /* Setup packet is present and captured */ - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, " s %02x %02x %04x %04x %04x", ep->setup[0], ep->setup[1], @@ -360,40 +514,86 @@ static ssize_t mon_text_read(struct file *file, char __user *buf, (ep->setup[5] << 8) | ep->setup[4], (ep->setup[7] << 8) | ep->setup[6]); } else if (ep->setup_flag != '-') { /* Unable to capture setup packet */ - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, " %c __ __ ____ ____ ____", ep->setup_flag); } else { /* No setup for this kind of URB */ - cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->status); + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d", ep->status); } - cnt += snprintf(pbuf + cnt, limit - cnt, " %d", ep->length); +} + +static void mon_text_read_intstat(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d:%d", ep->status, ep->interval); +} + +static void mon_text_read_isostat(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + if (ep->type == 'S') { + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d:%d:%d", ep->status, ep->interval, ep->start_frame); + } else { + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d:%d:%d:%d", + ep->status, ep->interval, ep->start_frame, ep->error_count); + } +} + +static void mon_text_read_isodesc(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + int ndesc; /* Display this many */ + int i; + const struct mon_iso_desc *dp; + + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d", ep->numdesc); + ndesc = ep->numdesc; + if (ndesc > ISODESC_MAX) + ndesc = ISODESC_MAX; + if (ndesc < 0) + ndesc = 0; + dp = ep->isodesc; + for (i = 0; i < ndesc; i++) { + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " %d:%u:%u", dp->status, dp->offset, dp->length); + dp++; + } +} + +static void mon_text_read_data(struct mon_reader_text *rp, + struct mon_text_ptr *p, const struct mon_event_text *ep) +{ + int data_len, i; if ((data_len = ep->length) > 0) { if (ep->data_flag == 0) { - cnt += snprintf(pbuf + cnt, limit - cnt, " ="); + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + " ="); if (data_len >= DATA_MAX) data_len = DATA_MAX; for (i = 0; i < data_len; i++) { if (i % 4 == 0) { - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, + p->limit - p->cnt, " "); } - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, + p->limit - p->cnt, "%02x", ep->data[i]); } - cnt += snprintf(pbuf + cnt, limit - cnt, "\n"); + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, + "\n"); } else { - cnt += snprintf(pbuf + cnt, limit - cnt, + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, " %c\n", ep->data_flag); } } else { - cnt += snprintf(pbuf + cnt, limit - cnt, "\n"); + p->cnt += snprintf(p->pbuf + p->cnt, p->limit - p->cnt, "\n"); } - - if (copy_to_user(buf, rp->printf_buf, cnt)) - cnt = -EFAULT; - mutex_unlock(&rp->printf_lock); - kmem_cache_free(rp->e_slab, ep); - return cnt; } static int mon_text_release(struct inode *inode, struct file *file) @@ -439,34 +639,46 @@ static int mon_text_release(struct inode *inode, struct file *file) return 0; } -static const struct file_operations mon_fops_text = { +static const struct file_operations mon_fops_text_t = { .owner = THIS_MODULE, .open = mon_text_open, .llseek = no_llseek, - .read = mon_text_read, - /* .write = mon_text_write, */ - /* .poll = mon_text_poll, */ - /* .ioctl = mon_text_ioctl, */ + .read = mon_text_read_t, .release = mon_text_release, }; -int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) +static const struct file_operations mon_fops_text_u = { + .owner = THIS_MODULE, + .open = mon_text_open, + .llseek = no_llseek, + .read = mon_text_read_u, + .release = mon_text_release, +}; + +int mon_text_add(struct mon_bus *mbus, int busnum) { struct dentry *d; enum { NAMESZ = 10 }; char name[NAMESZ]; int rc; - rc = snprintf(name, NAMESZ, "%dt", ubus->busnum); + rc = snprintf(name, NAMESZ, "%dt", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_t; - d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text); + d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_t); if (d == NULL) goto err_create_t; mbus->dent_t = d; - /* XXX The stats do not belong to here (text API), but oh well... */ - rc = snprintf(name, NAMESZ, "%ds", ubus->busnum); + rc = snprintf(name, NAMESZ, "%du", busnum); + if (rc <= 0 || rc >= NAMESZ) + goto err_print_u; + d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text_u); + if (d == NULL) + goto err_create_u; + mbus->dent_u = d; + + rc = snprintf(name, NAMESZ, "%ds", busnum); if (rc <= 0 || rc >= NAMESZ) goto err_print_s; d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat); @@ -478,6 +690,10 @@ int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus) err_create_s: err_print_s: + debugfs_remove(mbus->dent_u); + mbus->dent_u = NULL; +err_create_u: +err_print_u: debugfs_remove(mbus->dent_t); mbus->dent_t = NULL; err_create_t: @@ -487,6 +703,7 @@ err_print_t: void mon_text_del(struct mon_bus *mbus) { + debugfs_remove(mbus->dent_u); debugfs_remove(mbus->dent_t); debugfs_remove(mbus->dent_s); } diff --git a/drivers/usb/mon/usb_mon.h b/drivers/usb/mon/usb_mon.h index efdfd8993d9e..13d63255283e 100644 --- a/drivers/usb/mon/usb_mon.h +++ b/drivers/usb/mon/usb_mon.h @@ -22,7 +22,7 @@ struct mon_bus { int text_inited; struct dentry *dent_s; /* Debugging file */ struct dentry *dent_t; /* Text interface file */ - int uses_dma; + struct dentry *dent_u; /* Second text interface file */ /* Ref */ int nreaders; /* Under mon_lock AND mbus->lock */ @@ -52,7 +52,7 @@ void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r); struct mon_bus *mon_bus_lookup(unsigned int num); -int /*bool*/ mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus); +int /*bool*/ mon_text_add(struct mon_bus *mbus, int busnum); void mon_text_del(struct mon_bus *mbus); // void mon_bin_add(struct mon_bus *); @@ -81,4 +81,6 @@ extern struct mutex mon_lock; extern const struct file_operations mon_fops_stat; +extern struct mon_bus mon_bus0; /* Only for redundant checks */ + #endif /* __USB_MON_H */ diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c index ffec2e01b896..86e90c59d551 100644 --- a/drivers/usb/net/catc.c +++ b/drivers/usb/net/catc.c @@ -355,7 +355,7 @@ resubmit: * Transmit routines. */ -static void catc_tx_run(struct catc *catc) +static int catc_tx_run(struct catc *catc) { int status; @@ -373,12 +373,14 @@ static void catc_tx_run(struct catc *catc) catc->tx_ptr = 0; catc->netdev->trans_start = jiffies; + return status; } static void catc_tx_done(struct urb *urb) { struct catc *catc = urb->context; unsigned long flags; + int r; if (urb->status == -ECONNRESET) { dbg("Tx Reset."); @@ -397,10 +399,13 @@ static void catc_tx_done(struct urb *urb) spin_lock_irqsave(&catc->tx_lock, flags); - if (catc->tx_ptr) - catc_tx_run(catc); - else + if (catc->tx_ptr) { + r = catc_tx_run(catc); + if (unlikely(r < 0)) + clear_bit(TX_RUNNING, &catc->flags); + } else { clear_bit(TX_RUNNING, &catc->flags); + } netif_wake_queue(catc->netdev); @@ -411,6 +416,7 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev) { struct catc *catc = netdev_priv(netdev); unsigned long flags; + int r = 0; char *tx_buf; spin_lock_irqsave(&catc->tx_lock, flags); @@ -421,8 +427,11 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev) skb_copy_from_linear_data(skb, tx_buf + 2, skb->len); catc->tx_ptr += skb->len + 2; - if (!test_and_set_bit(TX_RUNNING, &catc->flags)) - catc_tx_run(catc); + if (!test_and_set_bit(TX_RUNNING, &catc->flags)) { + r = catc_tx_run(catc); + if (r < 0) + clear_bit(TX_RUNNING, &catc->flags); + } if ((catc->is_f5u011 && catc->tx_ptr) || (catc->tx_ptr >= ((TX_MAX_BURST - 1) * (PKT_SZ + 2)))) @@ -430,8 +439,10 @@ static int catc_hard_start_xmit(struct sk_buff *skb, struct net_device *netdev) spin_unlock_irqrestore(&catc->tx_lock, flags); - catc->stats.tx_bytes += skb->len; - catc->stats.tx_packets++; + if (r >= 0) { + catc->stats.tx_bytes += skb->len; + catc->stats.tx_packets++; + } dev_kfree_skb(skb); diff --git a/drivers/usb/net/dm9601.c b/drivers/usb/net/dm9601.c index 5130cc7eb314..a67638601477 100644 --- a/drivers/usb/net/dm9601.c +++ b/drivers/usb/net/dm9601.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/sched.h> +#include <linux/stddef.h> #include <linux/init.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> @@ -85,7 +86,7 @@ static int dm_write_reg(struct usbnet *dev, u8 reg, u8 value) usb_sndctrlpipe(dev->udev, 0), DM_WRITE_REG, USB_DIR_OUT | USB_TYPE_VENDOR |USB_RECIP_DEVICE, - value, reg, 0, 0, USB_CTRL_SET_TIMEOUT); + value, reg, NULL, 0, USB_CTRL_SET_TIMEOUT); } static void dm_write_async_callback(struct urb *urb) @@ -171,7 +172,7 @@ static void dm_write_reg_async(struct usbnet *dev, u8 reg, u8 value) usb_fill_control_urb(urb, dev->udev, usb_sndctrlpipe(dev->udev, 0), - (void *)req, 0, 0, dm_write_async_callback, req); + (void *)req, NULL, 0, dm_write_async_callback, req); status = usb_submit_urb(urb, GFP_ATOMIC); if (status < 0) { diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c index 1d36772ba6e1..980e4aaa97aa 100644 --- a/drivers/usb/net/rndis_host.c +++ b/drivers/usb/net/rndis_host.c @@ -253,6 +253,7 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */ * of that mess as possible. */ #define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101) +#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106) #define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e) /* @@ -349,7 +350,7 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf) case RNDIS_MSG_INDICATE: { /* fault */ // struct rndis_indicate *msg = (void *)buf; dev_info(&info->control->dev, - "rndis fault indication\n"); + "rndis fault indication\n"); } break; case RNDIS_MSG_KEEPALIVE: { /* ping */ @@ -387,6 +388,71 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf) return -ETIMEDOUT; } +/* + * rndis_query: + * + * Performs a query for @oid along with 0 or more bytes of payload as + * specified by @in_len. If @reply_len is not set to -1 then the reply + * length is checked against this value, resulting in an error if it + * doesn't match. + * + * NOTE: Adding a payload exactly or greater than the size of the expected + * response payload is an evident requirement MSFT added for ActiveSync. + * + * The only exception is for OIDs that return a variably sized response, + * in which case no payload should be added. This undocumented (and + * nonsensical!) issue was found by sniffing protocol requests from the + * ActiveSync 4.1 Windows driver. + */ +static int rndis_query(struct usbnet *dev, struct usb_interface *intf, + void *buf, u32 oid, u32 in_len, + void **reply, int *reply_len) +{ + int retval; + union { + void *buf; + struct rndis_msg_hdr *header; + struct rndis_query *get; + struct rndis_query_c *get_c; + } u; + u32 off, len; + + u.buf = buf; + + memset(u.get, 0, sizeof *u.get + in_len); + u.get->msg_type = RNDIS_MSG_QUERY; + u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len); + u.get->oid = oid; + u.get->len = cpu_to_le32(in_len); + u.get->offset = ccpu2(20); + + retval = rndis_command(dev, u.header); + if (unlikely(retval < 0)) { + dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n", + oid, retval); + return retval; + } + + off = le32_to_cpu(u.get_c->offset); + len = le32_to_cpu(u.get_c->len); + if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE)) + goto response_error; + + if (*reply_len != -1 && len != *reply_len) + goto response_error; + + *reply = (unsigned char *) &u.get_c->request_id + off; + *reply_len = len; + + return retval; + +response_error: + dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) " + "invalid response - off %d len %d\n", + oid, off, len); + return -EDOM; +} + static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) { int retval; @@ -403,6 +469,8 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) struct rndis_set_c *set_c; } u; u32 tmp; + int reply_len; + unsigned char *bp; /* we can't rely on i/o from stack working, or stack allocation */ u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL); @@ -421,6 +489,12 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) * TX we'll stick to one Ethernet packet plus RNDIS framing. * For RX we handle drivers that zero-pad to end-of-packet. * Don't let userspace change these settings. + * + * NOTE: there still seems to be wierdness here, as if we need + * to do some more things to make sure WinCE targets accept this. + * They default to jumbograms of 8KB or 16KB, which is absurd + * for such low data rates and which is also more than Linux + * can usually expect to allocate for SKB data... */ net->hard_header_len += sizeof (struct rndis_data_hdr); dev->hard_mtu = net->mtu + net->hard_header_len; @@ -434,7 +508,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) if (unlikely(retval < 0)) { /* it might not even be an RNDIS device!! */ dev_err(&intf->dev, "RNDIS init failed, %d\n", retval); - goto fail_and_release; + goto fail_and_release; } tmp = le32_to_cpu(u.init_c->max_transfer_size); if (tmp < dev->hard_mtu) { @@ -450,34 +524,15 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) dev->hard_mtu, tmp, dev->rx_urb_size, 1 << le32_to_cpu(u.init_c->packet_alignment)); - /* Get designated host ethernet address. - * - * Adding a payload exactly the same size as the expected response - * payload is an evident requirement MSFT added for ActiveSync. - * This undocumented (and nonsensical) issue was found by sniffing - * protocol requests from the ActiveSync 4.1 Windows driver. - */ - memset(u.get, 0, sizeof *u.get + 48); - u.get->msg_type = RNDIS_MSG_QUERY; - u.get->msg_len = ccpu2(sizeof *u.get + 48); - u.get->oid = OID_802_3_PERMANENT_ADDRESS; - u.get->len = ccpu2(48); - u.get->offset = ccpu2(20); - - retval = rndis_command(dev, u.header); - if (unlikely(retval < 0)) { + /* Get designated host ethernet address */ + reply_len = ETH_ALEN; + retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS, + 48, (void **) &bp, &reply_len); + if (unlikely(retval< 0)) { dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval); goto fail_and_release; } - tmp = le32_to_cpu(u.get_c->offset); - if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN) - || u.get_c->len != ccpu2(ETH_ALEN))) { - dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n", - tmp, le32_to_cpu(u.get_c->len)); - retval = -EDOM; - goto fail_and_release; - } - memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN); + memcpy(net->dev_addr, bp, ETH_ALEN); /* set a nonzero filter to enable data transfers */ memset(u.set, 0, sizeof *u.set); @@ -502,6 +557,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf) fail_and_release: usb_set_intfdata(info->data, NULL); usb_driver_release_interface(driver_of(intf), info->data); + info->data = NULL; fail: kfree(u.buf); return retval; @@ -618,7 +674,7 @@ fill: static const struct driver_info rndis_info = { .description = "RNDIS device", - .flags = FLAG_ETHER | FLAG_FRAMING_RN, + .flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT, .bind = rndis_bind, .unbind = rndis_unbind, .status = rndis_status, diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 0c5465a7909b..f9cd42d058b0 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -734,8 +734,7 @@ void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - /* REVISIT don't always return "usbnet" */ - strncpy (info->driver, driver_name, sizeof info->driver); + strncpy (info->driver, dev->driver_name, sizeof info->driver); strncpy (info->version, DRIVER_VERSION, sizeof info->version); strncpy (info->fw_version, dev->driver_info->description, sizeof info->fw_version); @@ -1115,10 +1114,12 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) struct driver_info *info; struct usb_device *xdev; int status; + const char *name; + name = udev->dev.driver->name; info = (struct driver_info *) prod->driver_info; if (!info) { - dev_dbg (&udev->dev, "blacklisted by %s\n", driver_name); + dev_dbg (&udev->dev, "blacklisted by %s\n", name); return -ENODEV; } xdev = interface_to_usbdev (udev); @@ -1138,6 +1139,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) dev = netdev_priv(net); dev->udev = xdev; dev->driver_info = info; + dev->driver_name = name; dev->msg_enable = netif_msg_init (msg_level, NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK); skb_queue_head_init (&dev->rxq); diff --git a/drivers/usb/net/usbnet.h b/drivers/usb/net/usbnet.h index 07c70abbe0ec..cbb53e065d6c 100644 --- a/drivers/usb/net/usbnet.h +++ b/drivers/usb/net/usbnet.h @@ -29,6 +29,7 @@ struct usbnet { /* housekeeping */ struct usb_device *udev; struct driver_info *driver_info; + const char *driver_name; wait_queue_head_t *wait; struct mutex phy_mutex; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 2f4d303ee36f..ba5d1dc03036 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -423,11 +423,11 @@ config USB_SERIAL_MCT_U232 module will be called mct_u232. config USB_SERIAL_MOS7720 - tristate "USB Moschip 7720 Single Port Serial Driver" + tristate "USB Moschip 7720 Serial Driver" depends on USB_SERIAL ---help--- - Say Y here if you want to use a USB Serial single port adapter from - Moschip Semiconductor Tech. + Say Y here if you want to use USB Serial single and double + port adapters from Moschip Semiconductor Tech. To compile this driver as a module, choose M here: the module will be called mos7720. diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 11dad42c3c60..b675735bfbee 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -209,6 +209,7 @@ static void aircable_send(struct usb_serial_port *port) int count, result; struct aircable_private *priv = usb_get_serial_port_data(port); unsigned char* buf; + u16 *dbuf; dbg("%s - port %d", __FUNCTION__, port->number); if (port->write_urb_busy) return; @@ -226,8 +227,8 @@ static void aircable_send(struct usb_serial_port *port) buf[0] = TX_HEADER_0; buf[1] = TX_HEADER_1; - buf[2] = (unsigned char)count; - buf[3] = (unsigned char)(count >> 8); + dbuf = (u16 *)&buf[2]; + *dbuf = cpu_to_le16((u16)count); serial_buf_get(priv->tx_buf,buf + HCI_HEADER_LENGTH, MAX_HCI_FRAMESIZE); memcpy(port->write_urb->transfer_buffer, buf, @@ -434,7 +435,7 @@ static void aircable_write_bulk_callback(struct urb *urb) __FUNCTION__, urb->status); port->write_urb->transfer_buffer_length = 1; port->write_urb->dev = port->serial->dev; - result = usb_submit_urb(port->write_urb, GFP_KERNEL); + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n", diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index edd685791a6b..ea2175bb2274 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -341,7 +341,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) result = usb_serial_generic_open(port, filp); if (result) - return result; + goto err_out; /* open */ ARK3116_RCV(serial, 111, 0xFE, 0xC0, 0x0000, 0x0003, 0x02, buf); @@ -372,6 +372,7 @@ static int ark3116_open(struct usb_serial_port *port, struct file *filp) if (port->tty) ark3116_set_termios(port, &tmp_termios); +err_out: kfree(buf); return result; diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index d7d0ba986a80..e831cb7f64fd 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -58,9 +58,11 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ + { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8ff9d54b21e6..95a1805b064f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -342,6 +342,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_USBX_707_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2101_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2102_PID) }, { USB_DEVICE(SEALEVEL_VID, SEALEVEL_2103_PID) }, @@ -1433,6 +1434,7 @@ static int ftdi_write (struct usb_serial_port *port, dbg("%s - write limit hit\n", __FUNCTION__); return 0; } + priv->tx_outstanding_urbs++; spin_unlock_irqrestore(&priv->tx_lock, flags); data_offset = priv->write_offset; @@ -1450,14 +1452,15 @@ static int ftdi_write (struct usb_serial_port *port, buffer = kmalloc (transfer_size, GFP_ATOMIC); if (!buffer) { err("%s ran out of kernel memory for urb ...", __FUNCTION__); - return -ENOMEM; + count = -ENOMEM; + goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { err("%s - no more free urbs", __FUNCTION__); - kfree (buffer); - return -ENOMEM; + count = -ENOMEM; + goto error_no_urb; } /* Copy data */ @@ -1499,10 +1502,9 @@ static int ftdi_write (struct usb_serial_port *port, if (status) { err("%s - failed submitting write urb, error %d", __FUNCTION__, status); count = status; - kfree (buffer); + goto error; } else { spin_lock_irqsave(&priv->tx_lock, flags); - ++priv->tx_outstanding_urbs; priv->tx_outstanding_bytes += count; priv->tx_bytes += count; spin_unlock_irqrestore(&priv->tx_lock, flags); @@ -1510,10 +1512,19 @@ static int ftdi_write (struct usb_serial_port *port, /* we are done with this urb, so let the host driver * really free it when it is finished with it */ - usb_free_urb (urb); + usb_free_urb(urb); dbg("%s write returning: %d", __FUNCTION__, count); return count; +error: + usb_free_urb(urb); +error_no_urb: + kfree (buffer); +error_no_buffer: + spin_lock_irqsave(&priv->tx_lock, flags); + priv->tx_outstanding_urbs--; + spin_unlock_irqrestore(&priv->tx_lock, flags); + return count; } /* ftdi_write */ diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 513cfe1b768b..77ad0a09b384 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -31,6 +31,7 @@ #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ +#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ /* www.canusb.com Lawicel CANUSB device */ diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 6a26a2e683a6..18f74ac76565 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -111,7 +111,7 @@ struct edgeport_port { struct TxFifo txfifo; /* transmit fifo -- size will be maxTxCredits */ struct urb *write_urb; /* write URB for this port */ - char write_in_progress; /* TRUE while a write URB is outstanding */ + bool write_in_progress; /* 'true' while a write URB is outstanding */ spinlock_t ep_lock; __u8 shadowLCR; /* last LCR value received */ @@ -123,11 +123,11 @@ struct edgeport_port { __u8 validDataMask; __u32 baudRate; - char open; - char openPending; - char commandPending; - char closePending; - char chaseResponsePending; + bool open; + bool openPending; + bool commandPending; + bool closePending; + bool chaseResponsePending; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ wait_queue_head_t wait_open; /* for handling sleeping while waiting for open to finish */ @@ -156,7 +156,7 @@ struct edgeport_serial { __u8 bulk_in_endpoint; /* the bulk in endpoint handle */ unsigned char * bulk_in_buffer; /* the buffer we use for the bulk in endpoint */ struct urb * read_urb; /* our bulk read urb */ - int read_in_progress; + bool read_in_progress; spinlock_t es_lock; __u8 bulk_out_endpoint; /* the bulk out endpoint handle */ @@ -212,7 +212,7 @@ static int debug; static int low_latency = 1; /* tty low latency flag, on by default */ -static int CmdUrbs = 0; /* Number of outstanding Command Write Urbs */ +static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ /* local function prototypes */ @@ -631,14 +631,14 @@ static void edge_interrupt_callback (struct urb *urb) if (edge_serial->rxBytesAvail > 0 && !edge_serial->read_in_progress) { dbg("%s - posting a read", __FUNCTION__); - edge_serial->read_in_progress = TRUE; + edge_serial->read_in_progress = true; /* we have pending bytes on the bulk in pipe, send a request */ edge_serial->read_urb->dev = edge_serial->serial->dev; result = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (result) { dev_err(&edge_serial->serial->dev->dev, "%s - usb_submit_urb(read bulk) failed with result = %d\n", __FUNCTION__, result); - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; } } spin_unlock(&edge_serial->es_lock); @@ -695,13 +695,13 @@ static void edge_bulk_in_callback (struct urb *urb) if (urb->status) { dbg("%s - nonzero read bulk status received: %d", __FUNCTION__, urb->status); - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; return; } if (urb->actual_length == 0) { dbg("%s - read bulk callback with no data", __FUNCTION__); - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; return; } @@ -725,10 +725,10 @@ static void edge_bulk_in_callback (struct urb *urb) status = usb_submit_urb(edge_serial->read_urb, GFP_ATOMIC); if (status) { dev_err(&urb->dev->dev, "%s - usb_submit_urb(read bulk) failed, status = %d\n", __FUNCTION__, status); - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; } } else { - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; } spin_unlock(&edge_serial->es_lock); @@ -759,7 +759,7 @@ static void edge_bulk_out_data_callback (struct urb *urb) } // Release the Write URB - edge_port->write_in_progress = FALSE; + edge_port->write_in_progress = false; // Check if more data needs to be sent send_more_port_data((struct edgeport_serial *)(usb_get_serial_data(edge_port->port->serial)), edge_port); @@ -779,8 +779,8 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) dbg("%s", __FUNCTION__); - CmdUrbs--; - dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs); + atomic_dec(&CmdUrbs); + dbg("%s - FREE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs)); /* clean up the transfer buffer */ @@ -802,7 +802,7 @@ static void edge_bulk_out_cmd_callback (struct urb *urb) tty_wakeup(tty); /* we have completed the command */ - edge_port->commandPending = FALSE; + edge_port->commandPending = false; wake_up(&edge_port->wait_command); } @@ -868,7 +868,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) port0->bulk_in_buffer, edge_serial->read_urb->transfer_buffer_length, edge_bulk_in_callback, edge_serial); - edge_serial->read_in_progress = FALSE; + edge_serial->read_in_progress = false; /* start interrupt read for this edgeport * this interrupt will continue as long as the edgeport is connected */ @@ -890,26 +890,26 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) /* initialize our port settings */ edge_port->txCredits = 0; /* Can't send any data yet */ edge_port->shadowMCR = MCR_MASTER_IE; /* Must always set this bit to enable ints! */ - edge_port->chaseResponsePending = FALSE; + edge_port->chaseResponsePending = false; /* send a open port command */ - edge_port->openPending = TRUE; - edge_port->open = FALSE; + edge_port->openPending = true; + edge_port->open = false; response = send_iosp_ext_cmd (edge_port, IOSP_CMD_OPEN_PORT, 0); if (response < 0) { dev_err(&port->dev, "%s - error sending open port command\n", __FUNCTION__); - edge_port->openPending = FALSE; + edge_port->openPending = false; return -ENODEV; } /* now wait for the port to be completely opened */ - wait_event_timeout(edge_port->wait_open, (edge_port->openPending != TRUE), OPEN_TIMEOUT); + wait_event_timeout(edge_port->wait_open, !edge_port->openPending, OPEN_TIMEOUT); - if (edge_port->open == FALSE) { + if (!edge_port->open) { /* open timed out */ dbg("%s - open timedout", __FUNCTION__); - edge_port->openPending = FALSE; + edge_port->openPending = false; return -ENODEV; } @@ -928,7 +928,7 @@ static int edge_open (struct usb_serial_port *port, struct file * filp) /* Allocate a URB for the write */ edge_port->write_urb = usb_alloc_urb (0, GFP_KERNEL); - edge_port->write_in_progress = FALSE; + edge_port->write_in_progress = false; if (!edge_port->write_urb) { dbg("%s - no memory", __FUNCTION__); @@ -966,7 +966,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) lastCredits = edge_port->txCredits; // Did we get our Chase response - if (edge_port->chaseResponsePending == FALSE) { + if (!edge_port->chaseResponsePending) { dbg("%s - Got Chase Response", __FUNCTION__); // did we get all of our credit back? @@ -985,7 +985,7 @@ static void block_until_chase_response(struct edgeport_port *edge_port) // No activity.. count down. loop--; if (loop == 0) { - edge_port->chaseResponsePending = FALSE; + edge_port->chaseResponsePending = false; dbg("%s - Chase TIMEOUT", __FUNCTION__); return; } @@ -1068,13 +1068,13 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) // block until tx is empty block_until_tx_empty(edge_port); - edge_port->closePending = TRUE; + edge_port->closePending = true; if ((!edge_serial->is_epic) || ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPChase))) { /* flush and chase */ - edge_port->chaseResponsePending = TRUE; + edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); @@ -1082,7 +1082,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) // block until chase finished block_until_chase_response(edge_port); } else { - edge_port->chaseResponsePending = FALSE; + edge_port->chaseResponsePending = false; } } @@ -1094,10 +1094,10 @@ static void edge_close (struct usb_serial_port *port, struct file * filp) send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0); } - //port->close = TRUE; - edge_port->closePending = FALSE; - edge_port->open = FALSE; - edge_port->openPending = FALSE; + //port->close = true; + edge_port->closePending = false; + edge_port->open = false; + edge_port->openPending = false; usb_kill_urb(edge_port->write_urb); @@ -1247,7 +1247,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge } // lock this write - edge_port->write_in_progress = TRUE; + edge_port->write_in_progress = true; // get a pointer to the write_urb urb = edge_port->write_urb; @@ -1261,7 +1261,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge buffer = kmalloc (count+2, GFP_ATOMIC); if (buffer == NULL) { dev_err(&edge_port->port->dev, "%s - no more kernel memory...\n", __FUNCTION__); - edge_port->write_in_progress = FALSE; + edge_port->write_in_progress = false; goto exit_send; } buffer[0] = IOSP_BUILD_DATA_HDR1 (edge_port->port->number - edge_port->port->serial->minor, count); @@ -1301,7 +1301,7 @@ static void send_more_port_data(struct edgeport_serial *edge_serial, struct edge if (status) { /* something went wrong */ dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write bulk) failed, status = %d, data lost\n", __FUNCTION__, status); - edge_port->write_in_progress = FALSE; + edge_port->write_in_progress = false; /* revert the credits as something bad happened. */ edge_port->txCredits += count; @@ -1332,7 +1332,7 @@ static int edge_write_room (struct usb_serial_port *port) if (edge_port == NULL) return -ENODEV; - if (edge_port->closePending == TRUE) + if (edge_port->closePending) return -ENODEV; dbg("%s - port %d", __FUNCTION__, port->number); @@ -1371,7 +1371,7 @@ static int edge_chars_in_buffer (struct usb_serial_port *port) if (edge_port == NULL) return -ENODEV; - if (edge_port->closePending == TRUE) + if (edge_port->closePending) return -ENODEV; if (!edge_port->open) { @@ -1762,7 +1762,7 @@ static void edge_break (struct usb_serial_port *port, int break_state) ((edge_serial->is_epic) && (edge_serial->epic_descriptor.Supports.IOSPChase))) { /* flush and chase */ - edge_port->chaseResponsePending = TRUE; + edge_port->chaseResponsePending = true; dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__); status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0); @@ -1770,7 +1770,7 @@ static void edge_break (struct usb_serial_port *port, int break_state) // block until chase finished block_until_chase_response(edge_port); } else { - edge_port->chaseResponsePending = FALSE; + edge_port->chaseResponsePending = false; } } @@ -1952,13 +1952,13 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 // Also, we currently clear flag and close the port regardless of content of above's Byte3. // We could choose to do something else when Byte3 says Timeout on Chase from Edgeport, // like wait longer in block_until_chase_response, but for now we don't. - edge_port->chaseResponsePending = FALSE; + edge_port->chaseResponsePending = false; wake_up (&edge_port->wait_chase); return; case IOSP_EXT_STATUS_RX_CHECK_RSP: dbg("%s ========== Port %u CHECK_RSP Sequence = %02x =============\n", __FUNCTION__, edge_serial->rxPort, byte3 ); - //Port->RxCheckRsp = TRUE; + //Port->RxCheckRsp = true; return; } } @@ -1974,8 +1974,8 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 change_port_settings (edge_port, edge_port->port->tty->termios); /* we have completed the open */ - edge_port->openPending = FALSE; - edge_port->open = TRUE; + edge_port->openPending = false; + edge_port->open = true; wake_up(&edge_port->wait_open); return; } @@ -1983,7 +1983,7 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 // If port is closed, silently discard all rcvd status. We can // have cases where buffered status is received AFTER the close // port command is sent to the Edgeport. - if ((!edge_port->open ) || (edge_port->closePending)) { + if (!edge_port->open || edge_port->closePending) { return; } @@ -1991,14 +1991,14 @@ static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2 // Not currently sent by Edgeport case IOSP_STATUS_LSR: dbg("%s - Port %u LSR Status = %02x", __FUNCTION__, edge_serial->rxPort, byte2); - handle_new_lsr (edge_port, FALSE, byte2, 0); + handle_new_lsr(edge_port, false, byte2, 0); break; case IOSP_STATUS_LSR_DATA: dbg("%s - Port %u LSR Status = %02x, Data = %02x", __FUNCTION__, edge_serial->rxPort, byte2, byte3); // byte2 is LSR Register // byte3 is broken data byte - handle_new_lsr (edge_port, TRUE, byte2, byte3); + handle_new_lsr(edge_port, true, byte2, byte3); break; // // case IOSP_EXT_4_STATUS: @@ -2317,14 +2317,14 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer if (!urb) return -ENOMEM; - CmdUrbs++; - dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, CmdUrbs); + atomic_inc(&CmdUrbs); + dbg("%s - ALLOCATE URB %p (outstanding %d)", __FUNCTION__, urb, atomic_read(&CmdUrbs)); usb_fill_bulk_urb (urb, edge_serial->serial->dev, usb_sndbulkpipe(edge_serial->serial->dev, edge_serial->bulk_out_endpoint), buffer, length, edge_bulk_out_cmd_callback, edge_port); - edge_port->commandPending = TRUE; + edge_port->commandPending = true; status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { @@ -2332,16 +2332,16 @@ static int write_cmd_usb (struct edgeport_port *edge_port, unsigned char *buffer dev_err(&edge_port->port->dev, "%s - usb_submit_urb(write command) failed, status = %d\n", __FUNCTION__, status); usb_kill_urb(urb); usb_free_urb(urb); - CmdUrbs--; + atomic_dec(&CmdUrbs); return status; } // wait for command to finish timeout = COMMAND_TIMEOUT; #if 0 - wait_event (&edge_port->wait_command, (edge_port->commandPending == FALSE)); + wait_event (&edge_port->wait_command, !edge_port->commandPending); - if (edge_port->commandPending == TRUE) { + if (edge_port->commandPending) { /* command timed out */ dbg("%s - command timed out", __FUNCTION__); status = -EINVAL; @@ -2524,8 +2524,8 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi dbg("%s - port %d", __FUNCTION__, edge_port->port->number); - if ((!edge_port->open) && - (!edge_port->openPending)) { + if (!edge_port->open && + !edge_port->openPending) { dbg("%s - port not opened", __FUNCTION__); return; } @@ -2836,9 +2836,9 @@ static int edge_startup (struct usb_serial *serial) struct usb_device *dev; int i, j; int response; - int interrupt_in_found; - int bulk_in_found; - int bulk_out_found; + bool interrupt_in_found; + bool bulk_in_found; + bool bulk_out_found; static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0, EDGE_COMPATIBILITY_MASK1, EDGE_COMPATIBILITY_MASK2 }; @@ -2936,14 +2936,14 @@ static int edge_startup (struct usb_serial *serial) if (edge_serial->is_epic) { /* EPIC thing, set up our interrupt polling now and our read urb, so * that the device knows it really is connected. */ - interrupt_in_found = bulk_in_found = bulk_out_found = FALSE; + interrupt_in_found = bulk_in_found = bulk_out_found = false; for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) { struct usb_endpoint_descriptor *endpoint; int buffer_size; endpoint = &serial->interface->altsetting[0].endpoint[i].desc; buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); - if ((!interrupt_in_found) && + if (!interrupt_in_found && (usb_endpoint_is_int_in(endpoint))) { /* we found a interrupt in endpoint */ dbg("found interrupt in"); @@ -2972,10 +2972,10 @@ static int edge_startup (struct usb_serial *serial) edge_serial, endpoint->bInterval); - interrupt_in_found = TRUE; + interrupt_in_found = true; } - if ((!bulk_in_found) && + if (!bulk_in_found && (usb_endpoint_is_bulk_in(endpoint))) { /* we found a bulk in endpoint */ dbg("found bulk in"); @@ -3001,19 +3001,19 @@ static int edge_startup (struct usb_serial *serial) endpoint->wMaxPacketSize, edge_bulk_in_callback, edge_serial); - bulk_in_found = TRUE; + bulk_in_found = true; } - if ((!bulk_out_found) && + if (!bulk_out_found && (usb_endpoint_is_bulk_out(endpoint))) { /* we found a bulk out endpoint */ dbg("found bulk out"); edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress; - bulk_out_found = TRUE; + bulk_out_found = true; } } - if ((!interrupt_in_found) || (!bulk_in_found) || (!bulk_out_found)) { + if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) { err ("Error - the proper endpoints were not found!"); return -ENODEV; } @@ -3083,6 +3083,7 @@ static int __init edgeport_init(void) retval = usb_register(&io_driver); if (retval) goto failed_usb_register; + atomic_set(&CmdUrbs, 0); info(DRIVER_DESC " " DRIVER_VERSION); return 0; diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index 29a913a6daca..cb201c1f67f9 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -19,12 +19,6 @@ #define MAX_RS232_PORTS 8 /* Max # of RS-232 ports per device */ /* typedefs that the insideout headers need */ -#ifndef TRUE - #define TRUE (1) -#endif -#ifndef FALSE - #define FALSE (0) -#endif #ifndef LOW8 #define LOW8(a) ((unsigned char)(a & 0xff)) #endif diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index d16e2e1764ad..4df0ec74e0b1 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -255,6 +255,7 @@ static struct usb_device_id ipaq_id_table [] = { { USB_DEVICE(0x04DD, 0x9102) }, /* SHARP WS003SH USB Modem */ { USB_DEVICE(0x04DD, 0x9121) }, /* SHARP WS004SH USB Modem */ { USB_DEVICE(0x04DD, 0x9123) }, /* SHARP WS007SH USB Modem */ + { USB_DEVICE(0x04DD, 0x9151) }, /* SHARP S01SH USB Modem */ { USB_DEVICE(0x04E8, 0x5F00) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F01) }, /* Samsung NEXiO USB Sync */ { USB_DEVICE(0x04E8, 0x5F02) }, /* Samsung NEXiO USB Sync */ diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index b2097c45a235..7b085f334ceb 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -238,7 +238,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, if (rc < 0) err("Reading line status failed (error = %d)", rc); else { - status = status_buf[0] + (status_buf[1]<<8); + status = le16_to_cpu(*(u16 *)status_buf); info("%s - read status %x %x", __FUNCTION__, status_buf[0], status_buf[1]); @@ -257,7 +257,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, static int klsi_105_startup (struct usb_serial *serial) { struct klsi_105_private *priv; - int i; + int i, j; /* check if we support the product id (see keyspan.c) * FIXME @@ -265,12 +265,12 @@ static int klsi_105_startup (struct usb_serial *serial) /* allocate the private data structure */ for (i=0; i<serial->num_ports; i++) { - int j; priv = kmalloc(sizeof(struct klsi_105_private), GFP_KERNEL); if (!priv) { dbg("%skmalloc for klsi_105_private failed.", __FUNCTION__); - return -ENOMEM; + i--; + goto err_cleanup; } /* set initial values for control structures */ priv->cfg.pktlen = 5; @@ -292,15 +292,14 @@ static int klsi_105_startup (struct usb_serial *serial) priv->write_urb_pool[j] = urb; if (urb == NULL) { err("No more urbs???"); - continue; + goto err_cleanup; } - urb->transfer_buffer = NULL; urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { err("%s - out of memory for urb buffers.", __FUNCTION__); - continue; + goto err_cleanup; } } @@ -308,7 +307,20 @@ static int klsi_105_startup (struct usb_serial *serial) init_waitqueue_head(&serial->port[i]->write_wait); } - return (0); + return 0; + +err_cleanup: + for (; i >= 0; i--) { + priv = usb_get_serial_port_data(serial->port[i]); + for (j=0; j < NUM_URBS; j++) { + if (priv->write_urb_pool[j]) { + kfree(priv->write_urb_pool[j]->transfer_buffer); + usb_free_urb(priv->write_urb_pool[j]); + } + } + usb_set_serial_port_data(serial->port[i], NULL); + } + return -ENOMEM; } /* klsi_105_startup */ diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 4cd839b1407f..3db1adc25f84 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -438,17 +438,21 @@ static int mct_u232_open (struct usb_serial_port *port, struct file *filp) if (retval) { err("usb_submit_urb(read bulk) failed pipe 0x%x err %d", port->read_urb->pipe, retval); - goto exit; + goto error; } port->interrupt_in_urb->dev = port->serial->dev; retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); - if (retval) + if (retval) { + usb_kill_urb(port->read_urb); err(" usb_submit_urb(read int) failed pipe 0x%x err %d", port->interrupt_in_urb->pipe, retval); - -exit: + goto error; + } return 0; + +error: + return retval; } /* mct_u232_open */ diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 19bf403f9db2..b563e2ad8728 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -103,11 +103,9 @@ static void mos7720_interrupt_callback(struct urb *urb) { int result; int length; - __u32 *data; - unsigned int status; + __u8 *data; __u8 sp1; __u8 sp2; - __u8 st; dbg("%s"," : Entering\n"); @@ -141,18 +139,19 @@ static void mos7720_interrupt_callback(struct urb *urb) * Byte 2 IIR Port 2 (port.number is 1) * Byte 3 -------------- * Byte 4 FIFO status for both */ - if (length && length > 4) { + + /* the above description is inverted + * oneukum 2007-03-14 */ + + if (unlikely(length != 4)) { dbg("Wrong data !!!"); return; } - status = *data; - - sp1 = (status & 0xff000000)>>24; - sp2 = (status & 0x00ff0000)>>16; - st = status & 0x000000ff; + sp1 = data[3]; + sp2 = data[2]; - if ((sp1 & 0x01) || (sp2 & 0x01)) { + if ((sp1 | sp2) & 0x01) { /* No Interrupt Pending in both the ports */ dbg("No Interrupt !!!"); } else { @@ -333,6 +332,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) int response; int port_number; char data; + int allocated_urbs = 0; int j; serial = port->serial; @@ -353,7 +353,7 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) /* Initialising the write urb pool */ for (j = 0; j < NUM_URBS; ++j) { - urb = usb_alloc_urb(0,GFP_ATOMIC); + urb = usb_alloc_urb(0,GFP_KERNEL); mos7720_port->write_urb_pool[j] = urb; if (urb == NULL) { @@ -365,10 +365,16 @@ static int mos7720_open(struct usb_serial_port *port, struct file * filp) GFP_KERNEL); if (!urb->transfer_buffer) { err("%s-out of memory for urb buffers.", __FUNCTION__); + usb_free_urb(mos7720_port->write_urb_pool[j]); + mos7720_port->write_urb_pool[j] = NULL; continue; } + allocated_urbs++; } + if (!allocated_urbs) + return -ENOMEM; + /* Initialize MCS7720 -- Write Init values to corresponding Registers * * Register Index @@ -526,7 +532,7 @@ static int mos7720_chars_in_buffer(struct usb_serial_port *port) } for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) + if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status == -EINPROGRESS) chars += URB_TRANSFER_BUFFER_SIZE; } dbg("%s - returns %d", __FUNCTION__, chars); @@ -629,7 +635,7 @@ static int mos7720_write_room(struct usb_serial_port *port) } for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) + if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) room += URB_TRANSFER_BUFFER_SIZE; } @@ -664,7 +670,7 @@ static int mos7720_write(struct usb_serial_port *port, urb = NULL; for (i = 0; i < NUM_URBS; ++i) { - if (mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { + if (mos7720_port->write_urb_pool[i] && mos7720_port->write_urb_pool[i]->status != -EINPROGRESS) { urb = mos7720_port->write_urb_pool[i]; dbg("URB:%d",i); break; diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index c6cca859af45..2366e7b63ece 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -176,9 +176,12 @@ struct moschip_port { int port_num; /*Actual port number in the device(1,2,etc) */ struct urb *write_urb; /* write URB for this port */ struct urb *read_urb; /* read URB for this port */ + struct urb *int_urb; __u8 shadowLCR; /* last LCR value received */ __u8 shadowMCR; /* last MCR value received */ char open; + char open_ports; + char zombie; wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */ wait_queue_head_t delta_msr_wait; /* for handling sleeping while waiting for msr change to happen */ int delta_msr_cond; @@ -191,17 +194,17 @@ struct moschip_port { __u8 DcrRegOffset; //for processing control URBS in interrupt context struct urb *control_urb; + struct usb_ctrlrequest *dr; char *ctrl_buf; int MsrLsr; + spinlock_t pool_lock; struct urb *write_urb_pool[NUM_URBS]; + char busy[NUM_URBS]; }; static int debug; -static int mos7840_num_ports; //this says the number of ports in the device -static int mos7840_num_open_ports; - /* * mos7840_set_reg_sync @@ -254,7 +257,7 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg, struct usb_device *dev = port->serial->dev; val = val & 0x00ff; // For the UART control registers, the application number need to be Or'ed - if (mos7840_num_ports == 4) { + if (port->serial->num_ports == 4) { val |= (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; @@ -294,7 +297,7 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg, //dbg("application number is %4x \n",(((__u16)port->number - (__u16)(port->serial->minor))+1)<<8); /*Wval is same as application number */ - if (mos7840_num_ports == 4) { + if (port->serial->num_ports == 4) { Wval = (((__u16) port->number - (__u16) (port->serial->minor)) + 1) << 8; @@ -352,7 +355,7 @@ static inline struct moschip_port *mos7840_get_port_private(struct return (struct moschip_port *)usb_get_serial_port_data(port); } -static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) +static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) { struct moschip_port *mos7840_port; struct async_icount *icount; @@ -366,22 +369,24 @@ static int mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr) /* update input line counters */ if (new_msr & MOS_MSR_DELTA_CTS) { icount->cts++; + smp_wmb(); } if (new_msr & MOS_MSR_DELTA_DSR) { icount->dsr++; + smp_wmb(); } if (new_msr & MOS_MSR_DELTA_CD) { icount->dcd++; + smp_wmb(); } if (new_msr & MOS_MSR_DELTA_RI) { icount->rng++; + smp_wmb(); } } - - return 0; } -static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) +static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) { struct async_icount *icount; @@ -400,18 +405,20 @@ static int mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr) icount = &port->icount; if (new_lsr & SERIAL_LSR_BI) { icount->brk++; + smp_wmb(); } if (new_lsr & SERIAL_LSR_OE) { icount->overrun++; + smp_wmb(); } if (new_lsr & SERIAL_LSR_PE) { icount->parity++; + smp_wmb(); } if (new_lsr & SERIAL_LSR_FE) { icount->frame++; + smp_wmb(); } - - return 0; } /************************************************************************/ @@ -426,12 +433,15 @@ static void mos7840_control_callback(struct urb *urb) unsigned char *data; struct moschip_port *mos7840_port; __u8 regval = 0x0; + int result = 0; if (!urb) { dbg("%s", "Invalid Pointer !!!!:\n"); return; } + mos7840_port = (struct moschip_port *)urb->context; + switch (urb->status) { case 0: /* success */ @@ -449,8 +459,6 @@ static void mos7840_control_callback(struct urb *urb) goto exit; } - mos7840_port = (struct moschip_port *)urb->context; - dbg("%s urb buffer size is %d\n", __FUNCTION__, urb->actual_length); dbg("%s mos7840_port->MsrLsr is %d port %d\n", __FUNCTION__, mos7840_port->MsrLsr, mos7840_port->port_num); @@ -462,21 +470,26 @@ static void mos7840_control_callback(struct urb *urb) else if (mos7840_port->MsrLsr == 1) mos7840_handle_new_lsr(mos7840_port, regval); - exit: - return; +exit: + spin_lock(&mos7840_port->pool_lock); + if (!mos7840_port->zombie) + result = usb_submit_urb(mos7840_port->int_urb, GFP_ATOMIC); + spin_unlock(&mos7840_port->pool_lock); + if (result) { + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __FUNCTION__, result); + } } static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg, __u16 * val) { struct usb_device *dev = mcs->port->serial->dev; - struct usb_ctrlrequest *dr = NULL; - unsigned char *buffer = NULL; - int ret = 0; - buffer = (__u8 *) mcs->ctrl_buf; + struct usb_ctrlrequest *dr = mcs->dr; + unsigned char *buffer = mcs->ctrl_buf; + int ret; -// dr=(struct usb_ctrlrequest *)(buffer); - dr = (void *)(buffer + 2); dr->bRequestType = MCS_RD_RTYPE; dr->bRequest = MCS_RDREQ; dr->wValue = cpu_to_le16(Wval); //0; @@ -506,8 +519,8 @@ static void mos7840_interrupt_callback(struct urb *urb) __u16 Data; unsigned char *data; __u8 sp[5], st; - int i; - __u16 wval; + int i, rv = 0; + __u16 wval, wreg = 0; dbg("%s", " : Entering\n"); if (!urb) { @@ -569,31 +582,34 @@ static void mos7840_interrupt_callback(struct urb *urb) dbg("Serial Port %d: Receiver status error or ", i); dbg("address bit detected in 9-bit mode\n"); mos7840_port->MsrLsr = 1; - mos7840_get_reg(mos7840_port, wval, - LINE_STATUS_REGISTER, - &Data); + wreg = LINE_STATUS_REGISTER; break; case SERIAL_IIR_MS: dbg("Serial Port %d: Modem status change\n", i); mos7840_port->MsrLsr = 0; - mos7840_get_reg(mos7840_port, wval, - MODEM_STATUS_REGISTER, - &Data); + wreg = MODEM_STATUS_REGISTER; break; } + spin_lock(&mos7840_port->pool_lock); + if (!mos7840_port->zombie) { + rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data); + } else { + spin_unlock(&mos7840_port->pool_lock); + return; + } + spin_unlock(&mos7840_port->pool_lock); } } } - exit: + if (!(rv < 0)) /* the completion handler for the control urb will resubmit */ + return; +exit: result = usb_submit_urb(urb, GFP_ATOMIC); if (result) { dev_err(&urb->dev->dev, "%s - Error %d submitting interrupt urb\n", __FUNCTION__, result); } - - return; - } static int mos7840_port_paranoia_check(struct usb_serial_port *port, @@ -634,7 +650,8 @@ static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port, if (!port || mos7840_port_paranoia_check(port, function) || mos7840_serial_paranoia_check(port->serial, function)) { - /* then say that we don't have a valid usb_serial thing, which will * end up genrating -ENODEV return values */ + /* then say that we don't have a valid usb_serial thing, which will + * end up genrating -ENODEV return values */ return NULL; } @@ -699,6 +716,7 @@ static void mos7840_bulk_in_callback(struct urb *urb) tty_flip_buffer_push(tty); } mos7840_port->icount.rx += urb->actual_length; + smp_wmb(); dbg("mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx); } @@ -708,15 +726,14 @@ static void mos7840_bulk_in_callback(struct urb *urb) return; } - if (mos7840_port->read_urb->status != -EINPROGRESS) { - mos7840_port->read_urb->dev = serial->dev; - status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + mos7840_port->read_urb->dev = serial->dev; - if (status) { - dbg(" usb_submit_urb(read bulk) failed, status = %d", - status); - } + status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC); + + if (status) { + dbg(" usb_submit_urb(read bulk) failed, status = %d", + status); } } @@ -730,17 +747,28 @@ static void mos7840_bulk_out_data_callback(struct urb *urb) { struct moschip_port *mos7840_port; struct tty_struct *tty; + int i; + if (!urb) { dbg("%s", "Invalid Pointer !!!!:\n"); return; } + mos7840_port = (struct moschip_port *)urb->context; + spin_lock(&mos7840_port->pool_lock); + for (i = 0; i < NUM_URBS; i++) { + if (urb == mos7840_port->write_urb_pool[i]) { + mos7840_port->busy[i] = 0; + break; + } + } + spin_unlock(&mos7840_port->pool_lock); + if (urb->status) { dbg("nonzero write bulk status received:%d\n", urb->status); return; } - mos7840_port = (struct moschip_port *)urb->context; if (!mos7840_port) { dbg("%s", "NULL mos7840_port pointer \n"); return; @@ -792,13 +820,13 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) __u16 Data; int status; struct moschip_port *mos7840_port; + struct moschip_port *port0; if (mos7840_port_paranoia_check(port, __FUNCTION__)) { dbg("%s", "Port Paranoia failed \n"); return -ENODEV; } - mos7840_num_open_ports++; serial = port->serial; if (mos7840_serial_paranoia_check(serial, __FUNCTION__)) { @@ -807,16 +835,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) } mos7840_port = mos7840_get_port_private(port); + port0 = mos7840_get_port_private(serial->port[0]); - if (mos7840_port == NULL) + if (mos7840_port == NULL || port0 == NULL) return -ENODEV; usb_clear_halt(serial->dev, port->write_urb->pipe); usb_clear_halt(serial->dev, port->read_urb->pipe); + port0->open_ports++; /* Initialising the write urb pool */ for (j = 0; j < NUM_URBS; ++j) { - urb = usb_alloc_urb(0, GFP_ATOMIC); + urb = usb_alloc_urb(0, GFP_KERNEL); mos7840_port->write_urb_pool[j] = urb; if (urb == NULL) { @@ -824,10 +854,10 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) continue; } - urb->transfer_buffer = NULL; - urb->transfer_buffer = - kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); + urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL); if (!urb->transfer_buffer) { + usb_free_urb(urb); + mos7840_port->write_urb_pool[j] = NULL; err("%s-out of memory for urb buffers.", __FUNCTION__); continue; } @@ -879,9 +909,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) } Data |= 0x08; //Driver done bit Data |= 0x20; //rx_disable - status = 0; - status = - mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); + status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); if (status < 0) { dbg("writing Controlreg failed\n"); return -1; @@ -893,7 +921,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) //////////////////////////////////// Data = 0x00; - status = 0; status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dbg("disableing interrupts failed\n"); @@ -901,7 +928,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) } // Set FIFO_CONTROL_REGISTER to the default value Data = 0x00; - status = 0; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dbg("Writing FIFO_CONTROL_REGISTER failed\n"); @@ -909,7 +935,6 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) } Data = 0xcf; - status = 0; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dbg("Writing FIFO_CONTROL_REGISTER failed\n"); @@ -917,22 +942,18 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) } Data = 0x03; - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); mos7840_port->shadowLCR = Data; Data = 0x0b; - status = 0; status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data); mos7840_port->shadowMCR = Data; Data = 0x00; - status = 0; status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data); mos7840_port->shadowLCR = Data; Data |= SERIAL_LCR_DLAB; //data latch enable in LCR 0x80 - status = 0; status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data); Data = 0x0c; @@ -999,7 +1020,7 @@ static int mos7840_open(struct usb_serial_port *port, struct file *filp) /* Check to see if we've set up our endpoint info yet * * (can't set it up in mos7840_startup as the structures * * were not set up at that time.) */ - if (mos7840_num_open_ports == 1) { + if (port0->open_ports == 1) { if (serial->port[0]->interrupt_in_buffer == NULL) { /* set up interrupt urb */ @@ -1097,6 +1118,7 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) { int i; int chars = 0; + unsigned long flags; struct moschip_port *mos7840_port; dbg("%s \n", " mos7840_chars_in_buffer:entering ..........."); @@ -1112,13 +1134,15 @@ static int mos7840_chars_in_buffer(struct usb_serial_port *port) return -1; } + spin_lock_irqsave(&mos7840_port->pool_lock,flags); for (i = 0; i < NUM_URBS; ++i) { - if (mos7840_port->write_urb_pool[i]->status == -EINPROGRESS) { + if (mos7840_port->busy[i]) { chars += URB_TRANSFER_BUFFER_SIZE; } } + spin_unlock_irqrestore(&mos7840_port->pool_lock,flags); dbg("%s - returns %d", __FUNCTION__, chars); - return (chars); + return chars; } @@ -1172,6 +1196,7 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial; struct moschip_port *mos7840_port; + struct moschip_port *port0; int j; __u16 Data; @@ -1189,10 +1214,10 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) } mos7840_port = mos7840_get_port_private(port); + port0 = mos7840_get_port_private(serial->port[0]); - if (mos7840_port == NULL) { + if (mos7840_port == NULL || port0 == NULL) return; - } for (j = 0; j < NUM_URBS; ++j) usb_kill_urb(mos7840_port->write_urb_pool[j]); @@ -1234,12 +1259,13 @@ static void mos7840_close(struct usb_serial_port *port, struct file *filp) } // if(mos7840_port->ctrl_buf != NULL) // kfree(mos7840_port->ctrl_buf); - mos7840_num_open_ports--; + port0->open_ports--; dbg("mos7840_num_open_ports in close%d:in port%d\n", - mos7840_num_open_ports, port->number); - if (mos7840_num_open_ports == 0) { + port0->open_ports, port->number); + if (port0->open_ports == 0) { if (serial->port[0]->interrupt_in_urb) { dbg("%s", "Shutdown interrupt_in_urb\n"); + usb_kill_urb(serial->port[0]->interrupt_in_urb); } } @@ -1368,6 +1394,7 @@ static int mos7840_write_room(struct usb_serial_port *port) { int i; int room = 0; + unsigned long flags; struct moschip_port *mos7840_port; dbg("%s \n", " mos7840_write_room:entering ..........."); @@ -1384,14 +1411,17 @@ static int mos7840_write_room(struct usb_serial_port *port) return -1; } + spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) { + if (!mos7840_port->busy[i]) { room += URB_TRANSFER_BUFFER_SIZE; } } + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1; dbg("%s - returns %d", __FUNCTION__, room); - return (room); + return room; } @@ -1410,6 +1440,7 @@ static int mos7840_write(struct usb_serial_port *port, int i; int bytes_sent = 0; int transfer_size; + unsigned long flags; struct moschip_port *mos7840_port; struct usb_serial *serial; @@ -1476,13 +1507,16 @@ static int mos7840_write(struct usb_serial_port *port, /* try to find a free urb in the list */ urb = NULL; + spin_lock_irqsave(&mos7840_port->pool_lock, flags); for (i = 0; i < NUM_URBS; ++i) { - if (mos7840_port->write_urb_pool[i]->status != -EINPROGRESS) { + if (!mos7840_port->busy[i]) { + mos7840_port->busy[i] = 1; urb = mos7840_port->write_urb_pool[i]; dbg("\nURB:%d", i); break; } } + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); if (urb == NULL) { dbg("%s - no more free urbs", __FUNCTION__); @@ -1518,6 +1552,7 @@ static int mos7840_write(struct usb_serial_port *port, status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { + mos7840_port->busy[i] = 0; err("%s - usb_submit_urb(write bulk) failed with status = %d", __FUNCTION__, status); bytes_sent = status; @@ -1525,6 +1560,7 @@ static int mos7840_write(struct usb_serial_port *port, } bytes_sent = transfer_size; mos7840_port->icount.tx += transfer_size; + smp_wmb(); dbg("mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx); exit: @@ -2490,6 +2526,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, if (signal_pending(current)) return -ERESTARTSYS; cnow = mos7840_port->icount; + smp_rmb(); if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) return -EIO; /* no change => error */ @@ -2506,6 +2543,7 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, case TIOCGICOUNT: cnow = mos7840_port->icount; + smp_rmb(); icount.cts = cnow.cts; icount.dsr = cnow.dsr; icount.rng = cnow.rng; @@ -2535,19 +2573,18 @@ static int mos7840_ioctl(struct usb_serial_port *port, struct file *file, static int mos7840_calc_num_ports(struct usb_serial *serial) { + int mos7840_num_ports = 0; dbg("numberofendpoints: %d \n", (int)serial->interface->cur_altsetting->desc.bNumEndpoints); dbg("numberofendpoints: %d \n", (int)serial->interface->altsetting->desc.bNumEndpoints); if (serial->interface->cur_altsetting->desc.bNumEndpoints == 5) { - mos7840_num_ports = 2; - serial->type->num_ports = 2; + mos7840_num_ports = serial->num_ports = 2; } else if (serial->interface->cur_altsetting->desc.bNumEndpoints == 9) { - mos7840_num_ports = 4; - serial->type->num_bulk_in = 4; - serial->type->num_bulk_out = 4; - serial->type->num_ports = 4; + serial->num_bulk_in = 4; + serial->num_bulk_out = 4; + mos7840_num_ports = serial->num_ports = 4; } return mos7840_num_ports; @@ -2583,7 +2620,9 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL); if (mos7840_port == NULL) { err("%s - Out of memory", __FUNCTION__); - return -ENOMEM; + status = -ENOMEM; + i--; /* don't follow NULL pointer cleaning up */ + goto error; } /* Initialize all port interrupt end point to port 0 int endpoint * @@ -2591,6 +2630,7 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->port = serial->port[i]; mos7840_set_port_private(serial->port[i], mos7840_port); + spin_lock_init(&mos7840_port->pool_lock); mos7840_port->port_num = ((serial->port[i]->number - (serial->port[i]->serial->minor)) + @@ -2601,22 +2641,22 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_port->ControlRegOffset = 0x1; mos7840_port->DcrRegOffset = 0x4; } else if ((mos7840_port->port_num == 2) - && (mos7840_num_ports == 4)) { + && (serial->num_ports == 4)) { mos7840_port->SpRegOffset = 0x8; mos7840_port->ControlRegOffset = 0x9; mos7840_port->DcrRegOffset = 0x16; } else if ((mos7840_port->port_num == 2) - && (mos7840_num_ports == 2)) { + && (serial->num_ports == 2)) { mos7840_port->SpRegOffset = 0xa; mos7840_port->ControlRegOffset = 0xb; mos7840_port->DcrRegOffset = 0x19; } else if ((mos7840_port->port_num == 3) - && (mos7840_num_ports == 4)) { + && (serial->num_ports == 4)) { mos7840_port->SpRegOffset = 0xa; mos7840_port->ControlRegOffset = 0xb; mos7840_port->DcrRegOffset = 0x19; } else if ((mos7840_port->port_num == 4) - && (mos7840_num_ports == 4)) { + && (serial->num_ports == 4)) { mos7840_port->SpRegOffset = 0xc; mos7840_port->ControlRegOffset = 0xd; mos7840_port->DcrRegOffset = 0x1c; @@ -2701,21 +2741,19 @@ static int mos7840_startup(struct usb_serial *serial) dbg("CLK_START_VALUE_REGISTER Writing success status%d\n", status); Data = 0x20; - status = 0; status = mos7840_set_reg_sync(serial->port[i], CLK_MULTI_REGISTER, Data); if (status < 0) { dbg("Writing CLK_MULTI_REGISTER failed status-0x%x\n", status); - break; + goto error; } else dbg("CLK_MULTI_REGISTER Writing success status%d\n", status); //write value 0x0 to scratchpad register Data = 0x00; - status = 0; status = mos7840_set_uart_reg(serial->port[i], SCRATCH_PAD_REGISTER, Data); @@ -2729,7 +2767,7 @@ static int mos7840_startup(struct usb_serial *serial) //Zero Length flag register if ((mos7840_port->port_num != 1) - && (mos7840_num_ports == 2)) { + && (serial->num_ports == 2)) { Data = 0xff; status = 0; @@ -2770,14 +2808,17 @@ static int mos7840_startup(struct usb_serial *serial) i + 1, status); } - mos7840_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC); + mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL); mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL); - + mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf || !mos7840_port->dr) { + status = -ENOMEM; + goto error; + } } //Zero Length flag enable Data = 0x0f; - status = 0; status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data); if (status < 0) { dbg("Writing ZLP_REG5 failed status-0x%x\n", status); @@ -2789,6 +2830,17 @@ static int mos7840_startup(struct usb_serial *serial) usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), (__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ); return 0; +error: + for (/* nothing */; i >= 0; i--) { + mos7840_port = mos7840_get_port_private(serial->port[i]); + + kfree(mos7840_port->dr); + kfree(mos7840_port->ctrl_buf); + usb_free_urb(mos7840_port->control_urb); + kfree(mos7840_port); + serial->port[i] = NULL; + } + return status; } /**************************************************************************** @@ -2799,6 +2851,7 @@ static int mos7840_startup(struct usb_serial *serial) static void mos7840_shutdown(struct usb_serial *serial) { int i; + unsigned long flags; struct moschip_port *mos7840_port; dbg("%s \n", " shutdown :entering.........."); @@ -2814,8 +2867,12 @@ static void mos7840_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - kfree(mos7840_port->ctrl_buf); + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + mos7840_port->zombie = 1; + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); usb_kill_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); kfree(mos7840_port); mos7840_set_port_private(serial->port[i], NULL); } diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 0216ac12a27d..4adfab988e86 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -69,6 +69,7 @@ static void omninet_write_bulk_callback (struct urb *urb); static int omninet_write (struct usb_serial_port *port, const unsigned char *buf, int count); static int omninet_write_room (struct usb_serial_port *port); static void omninet_shutdown (struct usb_serial *serial); +static int omninet_attach (struct usb_serial *serial); static struct usb_device_id id_table [] = { { USB_DEVICE(ZYXEL_VENDOR_ID, ZYXEL_OMNINET_ID) }, @@ -99,6 +100,7 @@ static struct usb_serial_driver zyxel_omninet_device = { .num_bulk_in = 1, .num_bulk_out = 2, .num_ports = 1, + .attach = omninet_attach, .open = omninet_open, .close = omninet_close, .write = omninet_write, @@ -145,22 +147,30 @@ struct omninet_data __u8 od_outseq; // Sequence number for bulk_out URBs }; +static int omninet_attach (struct usb_serial *serial) +{ + struct omninet_data *od; + struct usb_serial_port *port = serial->port[0]; + + od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL ); + if( !od ) { + err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data)); + return -ENOMEM; + } + usb_set_serial_port_data(port, od); + return 0; +} + static int omninet_open (struct usb_serial_port *port, struct file *filp) { struct usb_serial *serial = port->serial; struct usb_serial_port *wport; - struct omninet_data *od; + struct omninet_data *od = usb_get_serial_port_data(port); int result = 0; dbg("%s - port %d", __FUNCTION__, port->number); od = kmalloc( sizeof(struct omninet_data), GFP_KERNEL ); - if( !od ) { - err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct omninet_data)); - return -ENOMEM; - } - - usb_set_serial_port_data(port, od); wport = serial->port[1]; wport->tty = port->tty; @@ -170,24 +180,17 @@ static int omninet_open (struct usb_serial_port *port, struct file *filp) port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length, omninet_read_bulk_callback, port); result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) + if (result) { err("%s - failed submitting read urb, error %d", __FUNCTION__, result); + } return result; } static void omninet_close (struct usb_serial_port *port, struct file * filp) { - struct usb_serial *serial = port->serial; - struct usb_serial_port *wport; - dbg("%s - port %d", __FUNCTION__, port->number); - - wport = serial->port[1]; - usb_kill_urb(wport->write_urb); usb_kill_urb(port->read_urb); - - kfree(usb_get_serial_port_data(port)); } @@ -326,7 +329,12 @@ static void omninet_write_bulk_callback (struct urb *urb) static void omninet_shutdown (struct usb_serial *serial) { + struct usb_serial_port *wport = serial->port[1]; + struct usb_serial_port *port = serial->port[0]; dbg ("%s", __FUNCTION__); + + usb_kill_urb(wport->write_urb); + kfree(usb_get_serial_port_data(port)); } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e178e6f40319..8c3f55b080b4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -113,6 +113,12 @@ static int option_send_setup(struct usb_serial_port *port); #define ANYDATA_VENDOR_ID 0x16d5 #define ANYDATA_PRODUCT_ID 0x6501 +#define BANDRICH_VENDOR_ID 0x1A8D +#define BANDRICH_PRODUCT_C100_1 0x1002 +#define BANDRICH_PRODUCT_C100_2 0x1003 + +#define DELL_VENDOR_ID 0x413C + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -165,6 +171,9 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ID) }, + { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, + { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, + { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); @@ -591,12 +600,6 @@ static int option_open(struct usb_serial_port *port, struct file *filp) return (0); } -static inline void stop_urb(struct urb *urb) -{ - if (urb && urb->status == -EINPROGRESS) - usb_kill_urb(urb); -} - static void option_close(struct usb_serial_port *port, struct file *filp) { int i; @@ -614,9 +617,9 @@ static void option_close(struct usb_serial_port *port, struct file *filp) /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) - stop_urb(portdata->in_urbs[i]); + usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) - stop_urb(portdata->out_urbs[i]); + usb_kill_urb(portdata->out_urbs[i]); } port->tty = NULL; } @@ -747,9 +750,9 @@ static void option_shutdown(struct usb_serial *serial) port = serial->port[i]; portdata = usb_get_serial_port_data(port); for (j = 0; j < N_IN_URB; j++) - stop_urb(portdata->in_urbs[j]); + usb_kill_urb(portdata->in_urbs[j]); for (j = 0; j < N_OUT_URB; j++) - stop_urb(portdata->out_urbs[j]); + usb_kill_urb(portdata->out_urbs[j]); } /* Now free them */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ecedd833818d..644607de4c11 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -456,12 +456,6 @@ static int sierra_open(struct usb_serial_port *port, struct file *filp) return (0); } -static inline void stop_urb(struct urb *urb) -{ - if (urb && urb->status == -EINPROGRESS) - usb_kill_urb(urb); -} - static void sierra_close(struct usb_serial_port *port, struct file *filp) { int i; @@ -479,9 +473,9 @@ static void sierra_close(struct usb_serial_port *port, struct file *filp) /* Stop reading/writing urbs */ for (i = 0; i < N_IN_URB; i++) - stop_urb(portdata->in_urbs[i]); + usb_unlink_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) - stop_urb(portdata->out_urbs[i]); + usb_unlink_urb(portdata->out_urbs[i]); } port->tty = NULL; } @@ -583,17 +577,26 @@ static void sierra_shutdown(struct usb_serial *serial) /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; + if (!port) + continue; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; + for (j = 0; j < N_IN_URB; j++) - stop_urb(portdata->in_urbs[j]); + usb_unlink_urb(portdata->in_urbs[j]); for (j = 0; j < N_OUT_URB; j++) - stop_urb(portdata->out_urbs[j]); + usb_unlink_urb(portdata->out_urbs[j]); } /* Now free them */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; + if (!port) + continue; portdata = usb_get_serial_port_data(port); + if (!portdata) + continue; for (j = 0; j < N_IN_URB; j++) { if (portdata->in_urbs[j]) { @@ -612,6 +615,8 @@ static void sierra_shutdown(struct usb_serial *serial) /* Now free per port private data */ for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; + if (!port) + continue; kfree(usb_get_serial_port_data(port)); } } diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 2f59ff226e2c..ffbe601cde2a 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -384,19 +384,21 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, dbg("%s - write limit hit\n", __FUNCTION__); return 0; } + priv->outstanding_urbs++; spin_unlock_irqrestore(&priv->lock, flags); buffer = kmalloc (count, GFP_ATOMIC); if (!buffer) { dev_err(&port->dev, "out of memory\n"); - return -ENOMEM; + count = -ENOMEM; + goto error_no_buffer; } urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { dev_err(&port->dev, "no more free urbs\n"); - kfree (buffer); - return -ENOMEM; + count = -ENOMEM; + goto error_no_urb; } memcpy (buffer, buf, count); @@ -415,19 +417,27 @@ static int visor_write (struct usb_serial_port *port, const unsigned char *buf, dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status); count = status; - kfree (buffer); + goto error; } else { spin_lock_irqsave(&priv->lock, flags); - ++priv->outstanding_urbs; priv->bytes_out += count; spin_unlock_irqrestore(&priv->lock, flags); } /* we are done with this urb, so let the host driver * really free it when it is finished with it */ - usb_free_urb (urb); + usb_free_urb(urb); return count; +error: + usb_free_urb(urb); +error_no_urb: + kfree(buffer); +error_no_buffer: + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + return count; } diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index bf16e9e1d84e..27c5f8f9a2d5 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -1109,7 +1109,7 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 * command_port = port->serial->port[COMMAND_PORT]; command_info = usb_get_serial_port_data(command_port); spin_lock_irqsave(&command_info->lock, flags); - command_info->command_finished = FALSE; + command_info->command_finished = false; transfer_buffer = (__u8 *)command_port->write_urb->transfer_buffer; transfer_buffer[0] = command; @@ -1124,12 +1124,12 @@ static int firm_send_command (struct usb_serial_port *port, __u8 command, __u8 * spin_unlock_irqrestore(&command_info->lock, flags); /* wait for the command to complete */ - wait_event_interruptible_timeout(command_info->wait_command, - (command_info->command_finished != FALSE), COMMAND_TIMEOUT); + wait_event_interruptible_timeout(command_info->wait_command, + (bool)command_info->command_finished, COMMAND_TIMEOUT); spin_lock_irqsave(&command_info->lock, flags); - if (command_info->command_finished == FALSE) { + if (command_info->command_finished == false) { dbg("%s - command timed out.", __FUNCTION__); retval = -ETIMEDOUT; goto exit; diff --git a/drivers/usb/serial/whiteheat.h b/drivers/usb/serial/whiteheat.h index d714eff58dc0..f16079705664 100644 --- a/drivers/usb/serial/whiteheat.h +++ b/drivers/usb/serial/whiteheat.h @@ -20,10 +20,6 @@ #define __LINUX_USB_SERIAL_WHITEHEAT_H -#define FALSE 0 -#define TRUE 1 - - /* WhiteHEAT commands */ #define WHITEHEAT_OPEN 1 /* open the port */ #define WHITEHEAT_CLOSE 2 /* close the port */ diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index 599ad10a761b..06d1107dbd47 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -117,6 +117,7 @@ EXPORT_SYMBOL_GPL(usb_usual_check_type); static int usu_probe(struct usb_interface *intf, const struct usb_device_id *id) { + int rc; unsigned long type; struct task_struct* task; unsigned long flags; @@ -135,7 +136,7 @@ static int usu_probe(struct usb_interface *intf, task = kthread_run(usu_probe_thread, (void*)type, "libusual_%d", type); if (IS_ERR(task)) { - int rc = PTR_ERR(task); + rc = PTR_ERR(task); printk(KERN_WARNING "libusual: " "Unable to start the thread for %s: %d\n", bias_names[type], rc); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4a9d0d5c7282..8b3145ab7757 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1371,15 +1371,6 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* This prevents the kernel from detecting the virtual cd-drive with the - * Windows drivers. <johann.wilhelm@student.tugraz.at> -*/ -UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0xffff, - "HUAWEI", - "E220 USB-UMTS Install", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), - /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */ UNUSUAL_DEV( 0x132b, 0x000b, 0x0001, 0x0001, "Minolta", diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 46929a1b6f24..8432bf171d2e 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -34,18 +34,25 @@ static struct usb_device_id skel_table [] = { }; MODULE_DEVICE_TABLE(usb, skel_table); +/* to prevent a race between open and disconnect */ +static DEFINE_MUTEX(skel_open_lock); + /* Get a minor range for your devices from the usb maintainer */ #define USB_SKEL_MINOR_BASE 192 /* our private defines. if this grows any larger, use your own .h file */ #define MAX_TRANSFER (PAGE_SIZE - 512) +/* MAX_TRANSFER is chosen so that the VM is not stressed by + allocations > PAGE_SIZE and the number of packets in a page + is an integer 512 is the largest possible packet on EHCI */ #define WRITES_IN_FLIGHT 8 +/* arbitrarily chosen */ /* Structure to hold all of our device specific stuff */ struct usb_skel { - struct usb_device *dev; /* the usb device for this device */ - struct usb_interface *interface; /* the interface for this device */ + struct usb_device *udev; /* the usb device for this device */ + struct usb_interface *interface; /* the interface for this device */ struct semaphore limit_sem; /* limiting the number of writes in progress */ unsigned char *bulk_in_buffer; /* the buffer to receive data */ size_t bulk_in_size; /* the size of the receive buffer */ @@ -76,8 +83,10 @@ static int skel_open(struct inode *inode, struct file *file) subminor = iminor(inode); + mutex_lock(&skel_open_lock); interface = usb_find_interface(&skel_driver, subminor); if (!interface) { + mutex_unlock(&skel_open_lock); err ("%s - error, can't find device for minor %d", __FUNCTION__, subminor); retval = -ENODEV; @@ -86,12 +95,15 @@ static int skel_open(struct inode *inode, struct file *file) dev = usb_get_intfdata(interface); if (!dev) { + mutex_unlock(&skel_open_lock); retval = -ENODEV; goto exit; } /* increment our usage count for the device */ kref_get(&dev->kref); + /* now we can drop the lock */ + mutex_unlock(&skel_open_lock); /* prevent the device from being autosuspended */ retval = usb_autopm_get_interface(interface); @@ -201,12 +213,6 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto exit; } - mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* disconnect() was called */ - retval = -ENODEV; - goto error; - } - /* create a urb, and a buffer for it, and copy the data to the urb */ urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) { @@ -225,6 +231,14 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou goto error; } + /* this lock makes sure we don't submit URBs to gone devices */ + mutex_lock(&dev->io_mutex); + if (!dev->interface) { /* disconnect() was called */ + mutex_unlock(&dev->io_mutex); + retval = -ENODEV; + goto error; + } + /* initialize the urb properly */ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, dev->bulk_out_endpointAddr), @@ -233,6 +247,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou /* send the data out the bulk port */ retval = usb_submit_urb(urb, GFP_KERNEL); + mutex_unlock(&dev->io_mutex); if (retval) { err("%s - failed submitting write urb, error %d", __FUNCTION__, retval); goto error; @@ -241,7 +256,7 @@ static ssize_t skel_write(struct file *file, const char *user_buffer, size_t cou /* release our reference to this urb, the USB core will eventually free it entirely */ usb_free_urb(urb); - mutex_unlock(&dev->io_mutex); + return writesize; error: @@ -249,7 +264,6 @@ error: usb_buffer_free(dev->udev, writesize, buf, urb->transfer_dma); usb_free_urb(urb); } - mutex_unlock(&dev->io_mutex); up(&dev->limit_sem); exit: @@ -344,6 +358,7 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i error: if (dev) + /* this frees allocated memory */ kref_put(&dev->kref, skel_delete); return retval; } @@ -354,20 +369,21 @@ static void skel_disconnect(struct usb_interface *interface) int minor = interface->minor; /* prevent skel_open() from racing skel_disconnect() */ - lock_kernel(); + mutex_lock(&skel_open_lock); dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); /* give back our minor */ usb_deregister_dev(interface, &skel_class); + mutex_unlock(&skel_open_lock); /* prevent more I/O from starting */ mutex_lock(&dev->io_mutex); dev->interface = NULL; mutex_unlock(&dev->io_mutex); - unlock_kernel(); + /* decrement our usage count */ kref_put(&dev->kref, skel_delete); @@ -380,6 +396,7 @@ static struct usb_driver skel_driver = { .probe = skel_probe, .disconnect = skel_disconnect, .id_table = skel_table, + .supports_autosuspend = 1, }; static int __init usb_skel_init(void) |
